?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
qemu-ga: remove dependency on gio and gthread
[qemu.git] / hw / eepro100.c
blob9b6f4a5cd818da51033da53a4349203de85dac79
1 /*
2 * QEMU i8255x (PRO100) emulation
3 *
4 * Copyright (C) 2006-2011 Stefan Weil
5 *
6 * Portions of the code are copies from grub / etherboot eepro100.c
7 * and linux e100.c.
8 *
9 * This program is free software: you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation, either version 2 of the License, or
12 * (at your option) version 3 or any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program. If not, see <http://www.gnu.org/licenses/>.
21 *
22 * Tested features (i82559):
23 * PXE boot (i386 guest, i386 / mips / mipsel / ppc host) ok
24 * Linux networking (i386) ok
25 *
26 * Untested:
27 * Windows networking
28 *
29 * References:
30 *
31 * Intel 8255x 10/100 Mbps Ethernet Controller Family
32 * Open Source Software Developer Manual
33 *
34 * TODO:
35 * * PHY emulation should be separated from nic emulation.
36 * Most nic emulations could share the same phy code.
37 * * i82550 is untested. It is programmed like the i82559.
38 * * i82562 is untested. It is programmed like the i82559.
39 * * Power management (i82558 and later) is not implemented.
40 * * Wake-on-LAN is not implemented.
41 */
42
43 #include <stddef.h> /* offsetof */
44 #include "hw.h"
45 #include "pci.h"
46 #include "net.h"
47 #include "eeprom93xx.h"
48 #include "sysemu.h"
49
50 /* QEMU sends frames smaller than 60 bytes to ethernet nics.
51 * Such frames are rejected by real nics and their emulations.
52 * To avoid this behaviour, other nic emulations pad received
53 * frames. The following definition enables this padding for
54 * eepro100, too. We keep the define around in case it might
55 * become useful the future if the core networking is ever
56 * changed to pad short packets itself. */
57 #define CONFIG_PAD_RECEIVED_FRAMES
58
59 #define KiB 1024
60
61 /* Debug EEPRO100 card. */
62 #if 0
63 # define DEBUG_EEPRO100
64 #endif
65
66 #ifdef DEBUG_EEPRO100
67 #define logout(fmt, ...) fprintf(stderr, "EE100\t%-24s" fmt, __func__, ## __VA_ARGS__)
68 #else
69 #define logout(fmt, ...) ((void)0)
70 #endif
71
72 /* Set flags to 0 to disable debug output. */
73 #define INT 1 /* interrupt related actions */
74 #define MDI 1 /* mdi related actions */
75 #define OTHER 1
76 #define RXTX 1
77 #define EEPROM 1 /* eeprom related actions */
78
79 #define TRACE(flag, command) ((flag) ? (command) : (void)0)
80
81 #define missing(text) fprintf(stderr, "eepro100: feature is missing in this emulation: " text "\n")
82
83 #define MAX_ETH_FRAME_SIZE 1514
84
85 /* This driver supports several different devices which are declared here. */
86 #define i82550 0x82550
87 #define i82551 0x82551
88 #define i82557A 0x82557a
89 #define i82557B 0x82557b
90 #define i82557C 0x82557c
91 #define i82558A 0x82558a
92 #define i82558B 0x82558b
93 #define i82559A 0x82559a
94 #define i82559B 0x82559b
95 #define i82559C 0x82559c
96 #define i82559ER 0x82559e
97 #define i82562 0x82562
98 #define i82801 0x82801
99
100 /* Use 64 word EEPROM. TODO: could be a runtime option. */
101 #define EEPROM_SIZE 64
102
103 #define PCI_MEM_SIZE (4 * KiB)
104 #define PCI_IO_SIZE 64
105 #define PCI_FLASH_SIZE (128 * KiB)
106
107 #define BIT(n) (1 << (n))
108 #define BITS(n, m) (((0xffffffffU << (31 - n)) >> (31 - n + m)) << m)
109
110 /* The SCB accepts the following controls for the Tx and Rx units: */
111 #define CU_NOP 0x0000 /* No operation. */
112 #define CU_START 0x0010 /* CU start. */
113 #define CU_RESUME 0x0020 /* CU resume. */
114 #define CU_STATSADDR 0x0040 /* Load dump counters address. */
115 #define CU_SHOWSTATS 0x0050 /* Dump statistical counters. */
116 #define CU_CMD_BASE 0x0060 /* Load CU base address. */
117 #define CU_DUMPSTATS 0x0070 /* Dump and reset statistical counters. */
118 #define CU_SRESUME 0x00a0 /* CU static resume. */
119
120 #define RU_NOP 0x0000
121 #define RX_START 0x0001
122 #define RX_RESUME 0x0002
123 #define RU_ABORT 0x0004
124 #define RX_ADDR_LOAD 0x0006
125 #define RX_RESUMENR 0x0007
126 #define INT_MASK 0x0100
127 #define DRVR_INT 0x0200 /* Driver generated interrupt. */
128
129 typedef struct {
130 PCIDeviceInfo pci;
131 uint32_t device;
132 uint8_t stats_size;
133 bool has_extended_tcb_support;
134 bool power_management;
135 } E100PCIDeviceInfo;
136
137 /* Offsets to the various registers.
138 All accesses need not be longword aligned. */
139 typedef enum {
140 SCBStatus = 0, /* Status Word. */
141 SCBAck = 1,
142 SCBCmd = 2, /* Rx/Command Unit command and status. */
143 SCBIntmask = 3,
144 SCBPointer = 4, /* General purpose pointer. */
145 SCBPort = 8, /* Misc. commands and operands. */
146 SCBflash = 12, /* Flash memory control. */
147 SCBeeprom = 14, /* EEPROM control. */
148 SCBCtrlMDI = 16, /* MDI interface control. */
149 SCBEarlyRx = 20, /* Early receive byte count. */
150 SCBFlow = 24, /* Flow Control. */
151 SCBpmdr = 27, /* Power Management Driver. */
152 SCBgctrl = 28, /* General Control. */
153 SCBgstat = 29, /* General Status. */
154 } E100RegisterOffset;
155
156 /* A speedo3 transmit buffer descriptor with two buffers... */
157 typedef struct {
158 uint16_t status;
159 uint16_t command;
160 uint32_t link; /* void * */
161 uint32_t tbd_array_addr; /* transmit buffer descriptor array address. */
162 uint16_t tcb_bytes; /* transmit command block byte count (in lower 14 bits */
163 uint8_t tx_threshold; /* transmit threshold */
164 uint8_t tbd_count; /* TBD number */
165 #if 0
166 /* This constitutes two "TBD" entries: hdr and data */
167 uint32_t tx_buf_addr0; /* void *, header of frame to be transmitted. */
168 int32_t tx_buf_size0; /* Length of Tx hdr. */
169 uint32_t tx_buf_addr1; /* void *, data to be transmitted. */
170 int32_t tx_buf_size1; /* Length of Tx data. */
171 #endif
172 } eepro100_tx_t;
173
174 /* Receive frame descriptor. */
175 typedef struct {
176 int16_t status;
177 uint16_t command;
178 uint32_t link; /* struct RxFD * */
179 uint32_t rx_buf_addr; /* void * */
180 uint16_t count;
181 uint16_t size;
182 /* Ethernet frame data follows. */
183 } eepro100_rx_t;
184
185 typedef enum {
186 COMMAND_EL = BIT(15),
187 COMMAND_S = BIT(14),
188 COMMAND_I = BIT(13),
189 COMMAND_NC = BIT(4),
190 COMMAND_SF = BIT(3),
191 COMMAND_CMD = BITS(2, 0),
192 } scb_command_bit;
193
194 typedef enum {
195 STATUS_C = BIT(15),
196 STATUS_OK = BIT(13),
197 } scb_status_bit;
198
199 typedef struct {
200 uint32_t tx_good_frames, tx_max_collisions, tx_late_collisions,
201 tx_underruns, tx_lost_crs, tx_deferred, tx_single_collisions,
202 tx_multiple_collisions, tx_total_collisions;
203 uint32_t rx_good_frames, rx_crc_errors, rx_alignment_errors,
204 rx_resource_errors, rx_overrun_errors, rx_cdt_errors,
205 rx_short_frame_errors;
206 uint32_t fc_xmt_pause, fc_rcv_pause, fc_rcv_unsupported;
207 uint16_t xmt_tco_frames, rcv_tco_frames;
208 /* TODO: i82559 has six reserved statistics but a total of 24 dwords. */
209 uint32_t reserved[4];
210 } eepro100_stats_t;
211
212 typedef enum {
213 cu_idle = 0,
214 cu_suspended = 1,
215 cu_active = 2,
216 cu_lpq_active = 2,
217 cu_hqp_active = 3
218 } cu_state_t;
219
220 typedef enum {
221 ru_idle = 0,
222 ru_suspended = 1,
223 ru_no_resources = 2,
224 ru_ready = 4
225 } ru_state_t;
226
227 typedef struct {
228 PCIDevice dev;
229 /* Hash register (multicast mask array, multiple individual addresses). */
230 uint8_t mult[8];
231 int mmio_index;
232 NICState *nic;
233 NICConf conf;
234 uint8_t scb_stat; /* SCB stat/ack byte */
235 uint8_t int_stat; /* PCI interrupt status */
236 /* region must not be saved by nic_save. */
237 uint32_t region1; /* PCI region 1 address */
238 uint16_t mdimem[32];
239 eeprom_t *eeprom;
240 uint32_t device; /* device variant */
241 /* (cu_base + cu_offset) address the next command block in the command block list. */
242 uint32_t cu_base; /* CU base address */
243 uint32_t cu_offset; /* CU address offset */
244 /* (ru_base + ru_offset) address the RFD in the Receive Frame Area. */
245 uint32_t ru_base; /* RU base address */
246 uint32_t ru_offset; /* RU address offset */
247 uint32_t statsaddr; /* pointer to eepro100_stats_t */
248
249 /* Temporary status information (no need to save these values),
250 * used while processing CU commands. */
251 eepro100_tx_t tx; /* transmit buffer descriptor */
252 uint32_t cb_address; /* = cu_base + cu_offset */
253
254 /* Statistical counters. Also used for wake-up packet (i82559). */
255 eepro100_stats_t statistics;
256
257 /* Data in mem is always in the byte order of the controller (le).
258 * It must be dword aligned to allow direct access to 32 bit values. */
259 uint8_t mem[PCI_MEM_SIZE] __attribute__((aligned(8)));;
260
261 /* Configuration bytes. */
262 uint8_t configuration[22];
263
264 /* vmstate for each particular nic */
265 VMStateDescription *vmstate;
266
267 /* Quasi static device properties (no need to save them). */
268 uint16_t stats_size;
269 bool has_extended_tcb_support;
270 } EEPRO100State;
271
272 /* Word indices in EEPROM. */
273 typedef enum {
274 EEPROM_CNFG_MDIX = 0x03,
275 EEPROM_ID = 0x05,
276 EEPROM_PHY_ID = 0x06,
277 EEPROM_VENDOR_ID = 0x0c,
278 EEPROM_CONFIG_ASF = 0x0d,
279 EEPROM_DEVICE_ID = 0x23,
280 EEPROM_SMBUS_ADDR = 0x90,
281 } EEPROMOffset;
282
283 /* Bit values for EEPROM ID word. */
284 typedef enum {
285 EEPROM_ID_MDM = BIT(0), /* Modem */
286 EEPROM_ID_STB = BIT(1), /* Standby Enable */
287 EEPROM_ID_WMR = BIT(2), /* ??? */
288 EEPROM_ID_WOL = BIT(5), /* Wake on LAN */
289 EEPROM_ID_DPD = BIT(6), /* Deep Power Down */
290 EEPROM_ID_ALT = BIT(7), /* */
291 /* BITS(10, 8) device revision */
292 EEPROM_ID_BD = BIT(11), /* boot disable */
293 EEPROM_ID_ID = BIT(13), /* id bit */
294 /* BITS(15, 14) signature */
295 EEPROM_ID_VALID = BIT(14), /* signature for valid eeprom */
296 } eeprom_id_bit;
297
298 /* Default values for MDI (PHY) registers */
299 static const uint16_t eepro100_mdi_default[] = {
300 /* MDI Registers 0 - 6, 7 */
301 0x3000, 0x780d, 0x02a8, 0x0154, 0x05e1, 0x0000, 0x0000, 0x0000,
302 /* MDI Registers 8 - 15 */
303 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
304 /* MDI Registers 16 - 31 */
305 0x0003, 0x0000, 0x0001, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
306 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
307 };
308
309 /* Readonly mask for MDI (PHY) registers */
310 static const uint16_t eepro100_mdi_mask[] = {
311 0x0000, 0xffff, 0xffff, 0xffff, 0xc01f, 0xffff, 0xffff, 0x0000,
312 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
313 0x0fff, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
314 0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
315 };
316
317 /* Read a 16 bit little endian value from physical memory. */
318 static uint16_t e100_ldw_le_phys(target_phys_addr_t addr)
319 {
320 /* Load 16 bit (little endian) word from emulated hardware. */
321 uint16_t val;
322 cpu_physical_memory_read(addr, &val, sizeof(val));
323 return le16_to_cpu(val);
324 }
325
326 /* Read a 32 bit little endian value from physical memory. */
327 static uint32_t e100_ldl_le_phys(target_phys_addr_t addr)
328 {
329 /* Load 32 bit (little endian) word from emulated hardware. */
330 uint32_t val;
331 cpu_physical_memory_read(addr, &val, sizeof(val));
332 return le32_to_cpu(val);
333 }
334
335 /* Write a 16 bit little endian value to physical memory. */
336 static void e100_stw_le_phys(target_phys_addr_t addr, uint16_t val)
337 {
338 val = cpu_to_le16(val);
339 cpu_physical_memory_write(addr, &val, sizeof(val));
340 }
341
342 /* Write a 32 bit little endian value to physical memory. */
343 static void e100_stl_le_phys(target_phys_addr_t addr, uint32_t val)
344 {
345 val = cpu_to_le32(val);
346 cpu_physical_memory_write(addr, &val, sizeof(val));
347 }
348
349 #define POLYNOMIAL 0x04c11db6
350
351 /* From FreeBSD */
352 /* XXX: optimize */
353 static unsigned compute_mcast_idx(const uint8_t * ep)
354 {
355 uint32_t crc;
356 int carry, i, j;
357 uint8_t b;
358
359 crc = 0xffffffff;
360 for (i = 0; i < 6; i++) {
361 b = *ep++;
362 for (j = 0; j < 8; j++) {
363 carry = ((crc & 0x80000000L) ? 1 : 0) ^ (b & 0x01);
364 crc <<= 1;
365 b >>= 1;
366 if (carry) {
367 crc = ((crc ^ POLYNOMIAL) | carry);
368 }
369 }
370 }
371 return (crc & BITS(7, 2)) >> 2;
372 }
373
374 /* Read a 16 bit control/status (CSR) register. */
375 static uint16_t e100_read_reg2(EEPRO100State *s, E100RegisterOffset addr)
376 {
377 assert(!((uintptr_t)&s->mem[addr] & 1));
378 return le16_to_cpup((uint16_t *)&s->mem[addr]);
379 }
380
381 /* Read a 32 bit control/status (CSR) register. */
382 static uint32_t e100_read_reg4(EEPRO100State *s, E100RegisterOffset addr)
383 {
384 assert(!((uintptr_t)&s->mem[addr] & 3));
385 return le32_to_cpup((uint32_t *)&s->mem[addr]);
386 }
387
388 /* Write a 16 bit control/status (CSR) register. */
389 static void e100_write_reg2(EEPRO100State *s, E100RegisterOffset addr,
390 uint16_t val)
391 {
392 assert(!((uintptr_t)&s->mem[addr] & 1));
393 cpu_to_le16w((uint16_t *)&s->mem[addr], val);
394 }
395
396 /* Read a 32 bit control/status (CSR) register. */
397 static void e100_write_reg4(EEPRO100State *s, E100RegisterOffset addr,
398 uint32_t val)
399 {
400 assert(!((uintptr_t)&s->mem[addr] & 3));
401 cpu_to_le32w((uint32_t *)&s->mem[addr], val);
402 }
403
404 #if defined(DEBUG_EEPRO100)
405 static const char *nic_dump(const uint8_t * buf, unsigned size)
406 {
407 static char dump[3 * 16 + 1];
408 char *p = &dump[0];
409 if (size > 16) {
410 size = 16;
411 }
412 while (size-- > 0) {
413 p += sprintf(p, " %02x", *buf++);
414 }
415 return dump;
416 }
417 #endif /* DEBUG_EEPRO100 */
418
419 enum scb_stat_ack {
420 stat_ack_not_ours = 0x00,
421 stat_ack_sw_gen = 0x04,
422 stat_ack_rnr = 0x10,
423 stat_ack_cu_idle = 0x20,
424 stat_ack_frame_rx = 0x40,
425 stat_ack_cu_cmd_done = 0x80,
426 stat_ack_not_present = 0xFF,
427 stat_ack_rx = (stat_ack_sw_gen | stat_ack_rnr | stat_ack_frame_rx),
428 stat_ack_tx = (stat_ack_cu_idle | stat_ack_cu_cmd_done),
429 };
430
431 static void disable_interrupt(EEPRO100State * s)
432 {
433 if (s->int_stat) {
434 TRACE(INT, logout("interrupt disabled\n"));
435 qemu_irq_lower(s->dev.irq[0]);
436 s->int_stat = 0;
437 }
438 }
439
440 static void enable_interrupt(EEPRO100State * s)
441 {
442 if (!s->int_stat) {
443 TRACE(INT, logout("interrupt enabled\n"));
444 qemu_irq_raise(s->dev.irq[0]);
445 s->int_stat = 1;
446 }
447 }
448
449 static void eepro100_acknowledge(EEPRO100State * s)
450 {
451 s->scb_stat &= ~s->mem[SCBAck];
452 s->mem[SCBAck] = s->scb_stat;
453 if (s->scb_stat == 0) {
454 disable_interrupt(s);
455 }
456 }
457
458 static void eepro100_interrupt(EEPRO100State * s, uint8_t status)
459 {
460 uint8_t mask = ~s->mem[SCBIntmask];
461 s->mem[SCBAck] |= status;
462 status = s->scb_stat = s->mem[SCBAck];
463 status &= (mask | 0x0f);
464 #if 0
465 status &= (~s->mem[SCBIntmask] | 0x0xf);
466 #endif
467 if (status && (mask & 0x01)) {
468 /* SCB mask and SCB Bit M do not disable interrupt. */
469 enable_interrupt(s);
470 } else if (s->int_stat) {
471 disable_interrupt(s);
472 }
473 }
474
475 static void eepro100_cx_interrupt(EEPRO100State * s)
476 {
477 /* CU completed action command. */
478 /* Transmit not ok (82557 only, not in emulation). */
479 eepro100_interrupt(s, 0x80);
480 }
481
482 static void eepro100_cna_interrupt(EEPRO100State * s)
483 {
484 /* CU left the active state. */
485 eepro100_interrupt(s, 0x20);
486 }
487
488 static void eepro100_fr_interrupt(EEPRO100State * s)
489 {
490 /* RU received a complete frame. */
491 eepro100_interrupt(s, 0x40);
492 }
493
494 static void eepro100_rnr_interrupt(EEPRO100State * s)
495 {
496 /* RU is not ready. */
497 eepro100_interrupt(s, 0x10);
498 }
499
500 static void eepro100_mdi_interrupt(EEPRO100State * s)
501 {
502 /* MDI completed read or write cycle. */
503 eepro100_interrupt(s, 0x08);
504 }
505
506 static void eepro100_swi_interrupt(EEPRO100State * s)
507 {
508 /* Software has requested an interrupt. */
509 eepro100_interrupt(s, 0x04);
510 }
511
512 #if 0
513 static void eepro100_fcp_interrupt(EEPRO100State * s)
514 {
515 /* Flow control pause interrupt (82558 and later). */
516 eepro100_interrupt(s, 0x01);
517 }
518 #endif
519
520 static void e100_pci_reset(EEPRO100State * s, E100PCIDeviceInfo *e100_device)
521 {
522 uint32_t device = s->device;
523 uint8_t *pci_conf = s->dev.config;
524
525 TRACE(OTHER, logout("%p\n", s));
526
527 /* PCI Status */
528 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM |
529 PCI_STATUS_FAST_BACK);
530 /* PCI Latency Timer */
531 pci_set_byte(pci_conf + PCI_LATENCY_TIMER, 0x20); /* latency timer = 32 clocks */
532 /* Capability Pointer is set by PCI framework. */
533 /* Interrupt Line */
534 /* Interrupt Pin */
535 pci_set_byte(pci_conf + PCI_INTERRUPT_PIN, 1); /* interrupt pin A */
536 /* Minimum Grant */
537 pci_set_byte(pci_conf + PCI_MIN_GNT, 0x08);
538 /* Maximum Latency */
539 pci_set_byte(pci_conf + PCI_MAX_LAT, 0x18);
540
541 s->stats_size = e100_device->stats_size;
542 s->has_extended_tcb_support = e100_device->has_extended_tcb_support;
543
544 switch (device) {
545 case i82550:
546 case i82551:
547 case i82557A:
548 case i82557B:
549 case i82557C:
550 case i82558A:
551 case i82558B:
552 case i82559A:
553 case i82559B:
554 case i82559ER:
555 case i82562:
556 case i82801:
557 case i82559C:
558 break;
559 default:
560 logout("Device %X is undefined!\n", device);
561 }
562
563 /* Standard TxCB. */
564 s->configuration[6] |= BIT(4);
565
566 /* Standard statistical counters. */
567 s->configuration[6] |= BIT(5);
568
569 if (s->stats_size == 80) {
570 /* TODO: check TCO Statistical Counters bit. Documentation not clear. */
571 if (s->configuration[6] & BIT(2)) {
572 /* TCO statistical counters. */
573 assert(s->configuration[6] & BIT(5));
574 } else {
575 if (s->configuration[6] & BIT(5)) {
576 /* No extended statistical counters, i82557 compatible. */
577 s->stats_size = 64;
578 } else {
579 /* i82558 compatible. */
580 s->stats_size = 76;
581 }
582 }
583 } else {
584 if (s->configuration[6] & BIT(5)) {
585 /* No extended statistical counters. */
586 s->stats_size = 64;
587 }
588 }
589 assert(s->stats_size > 0 && s->stats_size <= sizeof(s->statistics));
590
591 if (e100_device->power_management) {
592 /* Power Management Capabilities */
593 int cfg_offset = 0xdc;
594 int r = pci_add_capability(&s->dev, PCI_CAP_ID_PM,
595 cfg_offset, PCI_PM_SIZEOF);
596 assert(r >= 0);
597 pci_set_word(pci_conf + cfg_offset + PCI_PM_PMC, 0x7e21);
598 #if 0 /* TODO: replace dummy code for power management emulation. */
599 /* TODO: Power Management Control / Status. */
600 pci_set_word(pci_conf + cfg_offset + PCI_PM_CTRL, 0x0000);
601 /* TODO: Ethernet Power Consumption Registers (i82559 and later). */
602 pci_set_byte(pci_conf + cfg_offset + PCI_PM_PPB_EXTENSIONS, 0x0000);
603 #endif
604 }
605
606 #if EEPROM_SIZE > 0
607 if (device == i82557C || device == i82558B || device == i82559C) {
608 /*
609 TODO: get vendor id from EEPROM for i82557C or later.
610 TODO: get device id from EEPROM for i82557C or later.
611 TODO: status bit 4 can be disabled by EEPROM for i82558, i82559.
612 TODO: header type is determined by EEPROM for i82559.
613 TODO: get subsystem id from EEPROM for i82557C or later.
614 TODO: get subsystem vendor id from EEPROM for i82557C or later.
615 TODO: exp. rom baddr depends on a bit in EEPROM for i82558 or later.
616 TODO: capability pointer depends on EEPROM for i82558.
617 */
618 logout("Get device id and revision from EEPROM!!!\n");
619 }
620 #endif /* EEPROM_SIZE > 0 */
621 }
622
623 static void nic_selective_reset(EEPRO100State * s)
624 {
625 size_t i;
626 uint16_t *eeprom_contents = eeprom93xx_data(s->eeprom);
627 #if 0
628 eeprom93xx_reset(s->eeprom);
629 #endif
630 memcpy(eeprom_contents, s->conf.macaddr.a, 6);
631 eeprom_contents[EEPROM_ID] = EEPROM_ID_VALID;
632 if (s->device == i82557B || s->device == i82557C)
633 eeprom_contents[5] = 0x0100;
634 eeprom_contents[EEPROM_PHY_ID] = 1;
635 uint16_t sum = 0;
636 for (i = 0; i < EEPROM_SIZE - 1; i++) {
637 sum += eeprom_contents[i];
638 }
639 eeprom_contents[EEPROM_SIZE - 1] = 0xbaba - sum;
640 TRACE(EEPROM, logout("checksum=0x%04x\n", eeprom_contents[EEPROM_SIZE - 1]));
641
642 memset(s->mem, 0, sizeof(s->mem));
643 e100_write_reg4(s, SCBCtrlMDI, BIT(21));
644
645 assert(sizeof(s->mdimem) == sizeof(eepro100_mdi_default));
646 memcpy(&s->mdimem[0], &eepro100_mdi_default[0], sizeof(s->mdimem));
647 }
648
649 static void nic_reset(void *opaque)
650 {
651 EEPRO100State *s = opaque;
652 TRACE(OTHER, logout("%p\n", s));
653 /* TODO: Clearing of hash register for selective reset, too? */
654 memset(&s->mult[0], 0, sizeof(s->mult));
655 nic_selective_reset(s);
656 }
657
658 #if defined(DEBUG_EEPRO100)
659 static const char * const e100_reg[PCI_IO_SIZE / 4] = {
660 "Command/Status",
661 "General Pointer",
662 "Port",
663 "EEPROM/Flash Control",
664 "MDI Control",
665 "Receive DMA Byte Count",
666 "Flow Control",
667 "General Status/Control"
668 };
669
670 static char *regname(uint32_t addr)
671 {
672 static char buf[32];
673 if (addr < PCI_IO_SIZE) {
674 const char *r = e100_reg[addr / 4];
675 if (r != 0) {
676 snprintf(buf, sizeof(buf), "%s+%u", r, addr % 4);
677 } else {
678 snprintf(buf, sizeof(buf), "0x%02x", addr);
679 }
680 } else {
681 snprintf(buf, sizeof(buf), "??? 0x%08x", addr);
682 }
683 return buf;
684 }
685 #endif /* DEBUG_EEPRO100 */
686
687 /*****************************************************************************
688 *
689 * Command emulation.
690 *
691 ****************************************************************************/
692
693 #if 0
694 static uint16_t eepro100_read_command(EEPRO100State * s)
695 {
696 uint16_t val = 0xffff;
697 TRACE(OTHER, logout("val=0x%04x\n", val));
698 return val;
699 }
700 #endif
701
702 /* Commands that can be put in a command list entry. */
703 enum commands {
704 CmdNOp = 0,
705 CmdIASetup = 1,
706 CmdConfigure = 2,
707 CmdMulticastList = 3,
708 CmdTx = 4,
709 CmdTDR = 5, /* load microcode */
710 CmdDump = 6,
711 CmdDiagnose = 7,
712
713 /* And some extra flags: */
714 CmdSuspend = 0x4000, /* Suspend after completion. */
715 CmdIntr = 0x2000, /* Interrupt after completion. */
716 CmdTxFlex = 0x0008, /* Use "Flexible mode" for CmdTx command. */
717 };
718
719 static cu_state_t get_cu_state(EEPRO100State * s)
720 {
721 return ((s->mem[SCBStatus] & BITS(7, 6)) >> 6);
722 }
723
724 static void set_cu_state(EEPRO100State * s, cu_state_t state)
725 {
726 s->mem[SCBStatus] = (s->mem[SCBStatus] & ~BITS(7, 6)) + (state << 6);
727 }
728
729 static ru_state_t get_ru_state(EEPRO100State * s)
730 {
731 return ((s->mem[SCBStatus] & BITS(5, 2)) >> 2);
732 }
733
734 static void set_ru_state(EEPRO100State * s, ru_state_t state)
735 {
736 s->mem[SCBStatus] = (s->mem[SCBStatus] & ~BITS(5, 2)) + (state << 2);
737 }
738
739 static void dump_statistics(EEPRO100State * s)
740 {
741 /* Dump statistical data. Most data is never changed by the emulation
742 * and always 0, so we first just copy the whole block and then those
743 * values which really matter.
744 * Number of data should check configuration!!!
745 */
746 cpu_physical_memory_write(s->statsaddr, &s->statistics, s->stats_size);
747 e100_stl_le_phys(s->statsaddr + 0, s->statistics.tx_good_frames);
748 e100_stl_le_phys(s->statsaddr + 36, s->statistics.rx_good_frames);
749 e100_stl_le_phys(s->statsaddr + 48, s->statistics.rx_resource_errors);
750 e100_stl_le_phys(s->statsaddr + 60, s->statistics.rx_short_frame_errors);
751 #if 0
752 e100_stw_le_phys(s->statsaddr + 76, s->statistics.xmt_tco_frames);
753 e100_stw_le_phys(s->statsaddr + 78, s->statistics.rcv_tco_frames);
754 missing("CU dump statistical counters");
755 #endif
756 }
757
758 static void read_cb(EEPRO100State *s)
759 {
760 cpu_physical_memory_read(s->cb_address, &s->tx, sizeof(s->tx));
761 s->tx.status = le16_to_cpu(s->tx.status);
762 s->tx.command = le16_to_cpu(s->tx.command);
763 s->tx.link = le32_to_cpu(s->tx.link);
764 s->tx.tbd_array_addr = le32_to_cpu(s->tx.tbd_array_addr);
765 s->tx.tcb_bytes = le16_to_cpu(s->tx.tcb_bytes);
766 }
767
768 static void tx_command(EEPRO100State *s)
769 {
770 uint32_t tbd_array = le32_to_cpu(s->tx.tbd_array_addr);
771 uint16_t tcb_bytes = (le16_to_cpu(s->tx.tcb_bytes) & 0x3fff);
772 /* Sends larger than MAX_ETH_FRAME_SIZE are allowed, up to 2600 bytes. */
773 uint8_t buf[2600];
774 uint16_t size = 0;
775 uint32_t tbd_address = s->cb_address + 0x10;
776 TRACE(RXTX, logout
777 ("transmit, TBD array address 0x%08x, TCB byte count 0x%04x, TBD count %u\n",
778 tbd_array, tcb_bytes, s->tx.tbd_count));
779
780 if (tcb_bytes > 2600) {
781 logout("TCB byte count too large, using 2600\n");
782 tcb_bytes = 2600;
783 }
784 if (!((tcb_bytes > 0) || (tbd_array != 0xffffffff))) {
785 logout
786 ("illegal values of TBD array address and TCB byte count!\n");
787 }
788 assert(tcb_bytes <= sizeof(buf));
789 while (size < tcb_bytes) {
790 uint32_t tx_buffer_address = e100_ldl_le_phys(tbd_address);
791 uint16_t tx_buffer_size = e100_ldw_le_phys(tbd_address + 4);
792 #if 0
793 uint16_t tx_buffer_el = e100_ldw_le_phys(tbd_address + 6);
794 #endif
795 tbd_address += 8;
796 TRACE(RXTX, logout
797 ("TBD (simplified mode): buffer address 0x%08x, size 0x%04x\n",
798 tx_buffer_address, tx_buffer_size));
799 tx_buffer_size = MIN(tx_buffer_size, sizeof(buf) - size);
800 cpu_physical_memory_read(tx_buffer_address, &buf[size],
801 tx_buffer_size);
802 size += tx_buffer_size;
803 }
804 if (tbd_array == 0xffffffff) {
805 /* Simplified mode. Was already handled by code above. */
806 } else {
807 /* Flexible mode. */
808 uint8_t tbd_count = 0;
809 if (s->has_extended_tcb_support && !(s->configuration[6] & BIT(4))) {
810 /* Extended Flexible TCB. */
811 for (; tbd_count < 2; tbd_count++) {
812 uint32_t tx_buffer_address = e100_ldl_le_phys(tbd_address);
813 uint16_t tx_buffer_size = e100_ldw_le_phys(tbd_address + 4);
814 uint16_t tx_buffer_el = e100_ldw_le_phys(tbd_address + 6);
815 tbd_address += 8;
816 TRACE(RXTX, logout
817 ("TBD (extended flexible mode): buffer address 0x%08x, size 0x%04x\n",
818 tx_buffer_address, tx_buffer_size));
819 tx_buffer_size = MIN(tx_buffer_size, sizeof(buf) - size);
820 cpu_physical_memory_read(tx_buffer_address, &buf[size],
821 tx_buffer_size);
822 size += tx_buffer_size;
823 if (tx_buffer_el & 1) {
824 break;
825 }
826 }
827 }
828 tbd_address = tbd_array;
829 for (; tbd_count < s->tx.tbd_count; tbd_count++) {
830 uint32_t tx_buffer_address = e100_ldl_le_phys(tbd_address);
831 uint16_t tx_buffer_size = e100_ldw_le_phys(tbd_address + 4);
832 uint16_t tx_buffer_el = e100_ldw_le_phys(tbd_address + 6);
833 tbd_address += 8;
834 TRACE(RXTX, logout
835 ("TBD (flexible mode): buffer address 0x%08x, size 0x%04x\n",
836 tx_buffer_address, tx_buffer_size));
837 tx_buffer_size = MIN(tx_buffer_size, sizeof(buf) - size);
838 cpu_physical_memory_read(tx_buffer_address, &buf[size],
839 tx_buffer_size);
840 size += tx_buffer_size;
841 if (tx_buffer_el & 1) {
842 break;
843 }
844 }
845 }
846 TRACE(RXTX, logout("%p sending frame, len=%d,%s\n", s, size, nic_dump(buf, size)));
847 qemu_send_packet(&s->nic->nc, buf, size);
848 s->statistics.tx_good_frames++;
849 /* Transmit with bad status would raise an CX/TNO interrupt.
850 * (82557 only). Emulation never has bad status. */
851 #if 0
852 eepro100_cx_interrupt(s);
853 #endif
854 }
855
856 static void set_multicast_list(EEPRO100State *s)
857 {
858 uint16_t multicast_count = s->tx.tbd_array_addr & BITS(13, 0);
859 uint16_t i;
860 memset(&s->mult[0], 0, sizeof(s->mult));
861 TRACE(OTHER, logout("multicast list, multicast count = %u\n", multicast_count));
862 for (i = 0; i < multicast_count; i += 6) {
863 uint8_t multicast_addr[6];
864 cpu_physical_memory_read(s->cb_address + 10 + i, multicast_addr, 6);
865 TRACE(OTHER, logout("multicast entry %s\n", nic_dump(multicast_addr, 6)));
866 unsigned mcast_idx = compute_mcast_idx(multicast_addr);
867 assert(mcast_idx < 64);
868 s->mult[mcast_idx >> 3] |= (1 << (mcast_idx & 7));
869 }
870 }
871
872 static void action_command(EEPRO100State *s)
873 {
874 for (;;) {
875 bool bit_el;
876 bool bit_s;
877 bool bit_i;
878 bool bit_nc;
879 uint16_t ok_status = STATUS_OK;
880 s->cb_address = s->cu_base + s->cu_offset;
881 read_cb(s);
882 bit_el = ((s->tx.command & COMMAND_EL) != 0);
883 bit_s = ((s->tx.command & COMMAND_S) != 0);
884 bit_i = ((s->tx.command & COMMAND_I) != 0);
885 bit_nc = ((s->tx.command & COMMAND_NC) != 0);
886 #if 0
887 bool bit_sf = ((s->tx.command & COMMAND_SF) != 0);
888 #endif
889 s->cu_offset = s->tx.link;
890 TRACE(OTHER,
891 logout("val=(cu start), status=0x%04x, command=0x%04x, link=0x%08x\n",
892 s->tx.status, s->tx.command, s->tx.link));
893 switch (s->tx.command & COMMAND_CMD) {
894 case CmdNOp:
895 /* Do nothing. */
896 break;
897 case CmdIASetup:
898 cpu_physical_memory_read(s->cb_address + 8, &s->conf.macaddr.a[0], 6);
899 TRACE(OTHER, logout("macaddr: %s\n", nic_dump(&s->conf.macaddr.a[0], 6)));
900 break;
901 case CmdConfigure:
902 cpu_physical_memory_read(s->cb_address + 8, &s->configuration[0],
903 sizeof(s->configuration));
904 TRACE(OTHER, logout("configuration: %s\n",
905 nic_dump(&s->configuration[0], 16)));
906 TRACE(OTHER, logout("configuration: %s\n",
907 nic_dump(&s->configuration[16],
908 ARRAY_SIZE(s->configuration) - 16)));
909 if (s->configuration[20] & BIT(6)) {
910 TRACE(OTHER, logout("Multiple IA bit\n"));
911 }
912 break;
913 case CmdMulticastList:
914 set_multicast_list(s);
915 break;
916 case CmdTx:
917 if (bit_nc) {
918 missing("CmdTx: NC = 0");
919 ok_status = 0;
920 break;
921 }
922 tx_command(s);
923 break;
924 case CmdTDR:
925 TRACE(OTHER, logout("load microcode\n"));
926 /* Starting with offset 8, the command contains
927 * 64 dwords microcode which we just ignore here. */
928 break;
929 case CmdDiagnose:
930 TRACE(OTHER, logout("diagnose\n"));
931 /* Make sure error flag is not set. */
932 s->tx.status = 0;
933 break;
934 default:
935 missing("undefined command");
936 ok_status = 0;
937 break;
938 }
939 /* Write new status. */
940 e100_stw_le_phys(s->cb_address, s->tx.status | ok_status | STATUS_C);
941 if (bit_i) {
942 /* CU completed action. */
943 eepro100_cx_interrupt(s);
944 }
945 if (bit_el) {
946 /* CU becomes idle. Terminate command loop. */
947 set_cu_state(s, cu_idle);
948 eepro100_cna_interrupt(s);
949 break;
950 } else if (bit_s) {
951 /* CU becomes suspended. Terminate command loop. */
952 set_cu_state(s, cu_suspended);
953 eepro100_cna_interrupt(s);
954 break;
955 } else {
956 /* More entries in list. */
957 TRACE(OTHER, logout("CU list with at least one more entry\n"));
958 }
959 }
960 TRACE(OTHER, logout("CU list empty\n"));
961 /* List is empty. Now CU is idle or suspended. */
962 }
963
964 static void eepro100_cu_command(EEPRO100State * s, uint8_t val)
965 {
966 cu_state_t cu_state;
967 switch (val) {
968 case CU_NOP:
969 /* No operation. */
970 break;
971 case CU_START:
972 cu_state = get_cu_state(s);
973 if (cu_state != cu_idle && cu_state != cu_suspended) {
974 /* Intel documentation says that CU must be idle or suspended
975 * for the CU start command. */
976 logout("unexpected CU state is %u\n", cu_state);
977 }
978 set_cu_state(s, cu_active);
979 s->cu_offset = e100_read_reg4(s, SCBPointer);
980 action_command(s);
981 break;
982 case CU_RESUME:
983 if (get_cu_state(s) != cu_suspended) {
984 logout("bad CU resume from CU state %u\n", get_cu_state(s));
985 /* Workaround for bad Linux eepro100 driver which resumes
986 * from idle state. */
987 #if 0
988 missing("cu resume");
989 #endif
990 set_cu_state(s, cu_suspended);
991 }
992 if (get_cu_state(s) == cu_suspended) {
993 TRACE(OTHER, logout("CU resuming\n"));
994 set_cu_state(s, cu_active);
995 action_command(s);
996 }
997 break;
998 case CU_STATSADDR:
999 /* Load dump counters address. */
1000 s->statsaddr = e100_read_reg4(s, SCBPointer);
1001 TRACE(OTHER, logout("val=0x%02x (status address)\n", val));
1002 break;
1003 case CU_SHOWSTATS:
1004 /* Dump statistical counters. */
1005 TRACE(OTHER, logout("val=0x%02x (dump stats)\n", val));
1006 dump_statistics(s);
1007 e100_stl_le_phys(s->statsaddr + s->stats_size, 0xa005);
1008 break;
1009 case CU_CMD_BASE:
1010 /* Load CU base. */
1011 TRACE(OTHER, logout("val=0x%02x (CU base address)\n", val));
1012 s->cu_base = e100_read_reg4(s, SCBPointer);
1013 break;
1014 case CU_DUMPSTATS:
1015 /* Dump and reset statistical counters. */
1016 TRACE(OTHER, logout("val=0x%02x (dump stats and reset)\n", val));
1017 dump_statistics(s);
1018 e100_stl_le_phys(s->statsaddr + s->stats_size, 0xa007);
1019 memset(&s->statistics, 0, sizeof(s->statistics));
1020 break;
1021 case CU_SRESUME:
1022 /* CU static resume. */
1023 missing("CU static resume");
1024 break;
1025 default:
1026 missing("Undefined CU command");
1027 }
1028 }
1029
1030 static void eepro100_ru_command(EEPRO100State * s, uint8_t val)
1031 {
1032 switch (val) {
1033 case RU_NOP:
1034 /* No operation. */
1035 break;
1036 case RX_START:
1037 /* RU start. */
1038 if (get_ru_state(s) != ru_idle) {
1039 logout("RU state is %u, should be %u\n", get_ru_state(s), ru_idle);
1040 #if 0
1041 assert(!"wrong RU state");
1042 #endif
1043 }
1044 set_ru_state(s, ru_ready);
1045 s->ru_offset = e100_read_reg4(s, SCBPointer);
1046 TRACE(OTHER, logout("val=0x%02x (rx start)\n", val));
1047 break;
1048 case RX_RESUME:
1049 /* Restart RU. */
1050 if (get_ru_state(s) != ru_suspended) {
1051 logout("RU state is %u, should be %u\n", get_ru_state(s),
1052 ru_suspended);
1053 #if 0
1054 assert(!"wrong RU state");
1055 #endif
1056 }
1057 set_ru_state(s, ru_ready);
1058 break;
1059 case RU_ABORT:
1060 /* RU abort. */
1061 if (get_ru_state(s) == ru_ready) {
1062 eepro100_rnr_interrupt(s);
1063 }
1064 set_ru_state(s, ru_idle);
1065 break;
1066 case RX_ADDR_LOAD:
1067 /* Load RU base. */
1068 TRACE(OTHER, logout("val=0x%02x (RU base address)\n", val));
1069 s->ru_base = e100_read_reg4(s, SCBPointer);
1070 break;
1071 default:
1072 logout("val=0x%02x (undefined RU command)\n", val);
1073 missing("Undefined SU command");
1074 }
1075 }
1076
1077 static void eepro100_write_command(EEPRO100State * s, uint8_t val)
1078 {
1079 eepro100_ru_command(s, val & 0x0f);
1080 eepro100_cu_command(s, val & 0xf0);
1081 if ((val) == 0) {
1082 TRACE(OTHER, logout("val=0x%02x\n", val));
1083 }
1084 /* Clear command byte after command was accepted. */
1085 s->mem[SCBCmd] = 0;
1086 }
1087
1088 /*****************************************************************************
1089 *
1090 * EEPROM emulation.
1091 *
1092 ****************************************************************************/
1093
1094 #define EEPROM_CS 0x02
1095 #define EEPROM_SK 0x01
1096 #define EEPROM_DI 0x04
1097 #define EEPROM_DO 0x08
1098
1099 static uint16_t eepro100_read_eeprom(EEPRO100State * s)
1100 {
1101 uint16_t val = e100_read_reg2(s, SCBeeprom);
1102 if (eeprom93xx_read(s->eeprom)) {
1103 val |= EEPROM_DO;
1104 } else {
1105 val &= ~EEPROM_DO;
1106 }
1107 TRACE(EEPROM, logout("val=0x%04x\n", val));
1108 return val;
1109 }
1110
1111 static void eepro100_write_eeprom(eeprom_t * eeprom, uint8_t val)
1112 {
1113 TRACE(EEPROM, logout("val=0x%02x\n", val));
1114
1115 /* mask unwritable bits */
1116 #if 0
1117 val = SET_MASKED(val, 0x31, eeprom->value);
1118 #endif
1119
1120 int eecs = ((val & EEPROM_CS) != 0);
1121 int eesk = ((val & EEPROM_SK) != 0);
1122 int eedi = ((val & EEPROM_DI) != 0);
1123 eeprom93xx_write(eeprom, eecs, eesk, eedi);
1124 }
1125
1126 /*****************************************************************************
1127 *
1128 * MDI emulation.
1129 *
1130 ****************************************************************************/
1131
1132 #if defined(DEBUG_EEPRO100)
1133 static const char * const mdi_op_name[] = {
1134 "opcode 0",
1135 "write",
1136 "read",
1137 "opcode 3"
1138 };
1139
1140 static const char * const mdi_reg_name[] = {
1141 "Control",
1142 "Status",
1143 "PHY Identification (Word 1)",
1144 "PHY Identification (Word 2)",
1145 "Auto-Negotiation Advertisement",
1146 "Auto-Negotiation Link Partner Ability",
1147 "Auto-Negotiation Expansion"
1148 };
1149
1150 static const char *reg2name(uint8_t reg)
1151 {
1152 static char buffer[10];
1153 const char *p = buffer;
1154 if (reg < ARRAY_SIZE(mdi_reg_name)) {
1155 p = mdi_reg_name[reg];
1156 } else {
1157 snprintf(buffer, sizeof(buffer), "reg=0x%02x", reg);
1158 }
1159 return p;
1160 }
1161 #endif /* DEBUG_EEPRO100 */
1162
1163 static uint32_t eepro100_read_mdi(EEPRO100State * s)
1164 {
1165 uint32_t val = e100_read_reg4(s, SCBCtrlMDI);
1166
1167 #ifdef DEBUG_EEPRO100
1168 uint8_t raiseint = (val & BIT(29)) >> 29;
1169 uint8_t opcode = (val & BITS(27, 26)) >> 26;
1170 uint8_t phy = (val & BITS(25, 21)) >> 21;
1171 uint8_t reg = (val & BITS(20, 16)) >> 16;
1172 uint16_t data = (val & BITS(15, 0));
1173 #endif
1174 /* Emulation takes no time to finish MDI transaction. */
1175 val |= BIT(28);
1176 TRACE(MDI, logout("val=0x%08x (int=%u, %s, phy=%u, %s, data=0x%04x\n",
1177 val, raiseint, mdi_op_name[opcode], phy,
1178 reg2name(reg), data));
1179 return val;
1180 }
1181
1182 static void eepro100_write_mdi(EEPRO100State *s)
1183 {
1184 uint32_t val = e100_read_reg4(s, SCBCtrlMDI);
1185 uint8_t raiseint = (val & BIT(29)) >> 29;
1186 uint8_t opcode = (val & BITS(27, 26)) >> 26;
1187 uint8_t phy = (val & BITS(25, 21)) >> 21;
1188 uint8_t reg = (val & BITS(20, 16)) >> 16;
1189 uint16_t data = (val & BITS(15, 0));
1190 TRACE(MDI, logout("val=0x%08x (int=%u, %s, phy=%u, %s, data=0x%04x\n",
1191 val, raiseint, mdi_op_name[opcode], phy, reg2name(reg), data));
1192 if (phy != 1) {
1193 /* Unsupported PHY address. */
1194 #if 0
1195 logout("phy must be 1 but is %u\n", phy);
1196 #endif
1197 data = 0;
1198 } else if (opcode != 1 && opcode != 2) {
1199 /* Unsupported opcode. */
1200 logout("opcode must be 1 or 2 but is %u\n", opcode);
1201 data = 0;
1202 } else if (reg > 6) {
1203 /* Unsupported register. */
1204 logout("register must be 0...6 but is %u\n", reg);
1205 data = 0;
1206 } else {
1207 TRACE(MDI, logout("val=0x%08x (int=%u, %s, phy=%u, %s, data=0x%04x\n",
1208 val, raiseint, mdi_op_name[opcode], phy,
1209 reg2name(reg), data));
1210 if (opcode == 1) {
1211 /* MDI write */
1212 switch (reg) {
1213 case 0: /* Control Register */
1214 if (data & 0x8000) {
1215 /* Reset status and control registers to default. */
1216 s->mdimem[0] = eepro100_mdi_default[0];
1217 s->mdimem[1] = eepro100_mdi_default[1];
1218 data = s->mdimem[reg];
1219 } else {
1220 /* Restart Auto Configuration = Normal Operation */
1221 data &= ~0x0200;
1222 }
1223 break;
1224 case 1: /* Status Register */
1225 missing("not writable");
1226 data = s->mdimem[reg];
1227 break;
1228 case 2: /* PHY Identification Register (Word 1) */
1229 case 3: /* PHY Identification Register (Word 2) */
1230 missing("not implemented");
1231 break;
1232 case 4: /* Auto-Negotiation Advertisement Register */
1233 case 5: /* Auto-Negotiation Link Partner Ability Register */
1234 break;
1235 case 6: /* Auto-Negotiation Expansion Register */
1236 default:
1237 missing("not implemented");
1238 }
1239 s->mdimem[reg] = data;
1240 } else if (opcode == 2) {
1241 /* MDI read */
1242 switch (reg) {
1243 case 0: /* Control Register */
1244 if (data & 0x8000) {
1245 /* Reset status and control registers to default. */
1246 s->mdimem[0] = eepro100_mdi_default[0];
1247 s->mdimem[1] = eepro100_mdi_default[1];
1248 }
1249 break;
1250 case 1: /* Status Register */
1251 s->mdimem[reg] |= 0x0020;
1252 break;
1253 case 2: /* PHY Identification Register (Word 1) */
1254 case 3: /* PHY Identification Register (Word 2) */
1255 case 4: /* Auto-Negotiation Advertisement Register */
1256 break;
1257 case 5: /* Auto-Negotiation Link Partner Ability Register */
1258 s->mdimem[reg] = 0x41fe;
1259 break;
1260 case 6: /* Auto-Negotiation Expansion Register */
1261 s->mdimem[reg] = 0x0001;
1262 break;
1263 }
1264 data = s->mdimem[reg];
1265 }
1266 /* Emulation takes no time to finish MDI transaction.
1267 * Set MDI bit in SCB status register. */
1268 s->mem[SCBAck] |= 0x08;
1269 val |= BIT(28);
1270 if (raiseint) {
1271 eepro100_mdi_interrupt(s);
1272 }
1273 }
1274 val = (val & 0xffff0000) + data;
1275 e100_write_reg4(s, SCBCtrlMDI, val);
1276 }
1277
1278 /*****************************************************************************
1279 *
1280 * Port emulation.
1281 *
1282 ****************************************************************************/
1283
1284 #define PORT_SOFTWARE_RESET 0
1285 #define PORT_SELFTEST 1
1286 #define PORT_SELECTIVE_RESET 2
1287 #define PORT_DUMP 3
1288 #define PORT_SELECTION_MASK 3
1289
1290 typedef struct {
1291 uint32_t st_sign; /* Self Test Signature */
1292 uint32_t st_result; /* Self Test Results */
1293 } eepro100_selftest_t;
1294
1295 static uint32_t eepro100_read_port(EEPRO100State * s)
1296 {
1297 return 0;
1298 }
1299
1300 static void eepro100_write_port(EEPRO100State *s)
1301 {
1302 uint32_t val = e100_read_reg4(s, SCBPort);
1303 uint32_t address = (val & ~PORT_SELECTION_MASK);
1304 uint8_t selection = (val & PORT_SELECTION_MASK);
1305 switch (selection) {
1306 case PORT_SOFTWARE_RESET:
1307 nic_reset(s);
1308 break;
1309 case PORT_SELFTEST:
1310 TRACE(OTHER, logout("selftest address=0x%08x\n", address));
1311 eepro100_selftest_t data;
1312 cpu_physical_memory_read(address, &data, sizeof(data));
1313 data.st_sign = 0xffffffff;
1314 data.st_result = 0;
1315 cpu_physical_memory_write(address, &data, sizeof(data));
1316 break;
1317 case PORT_SELECTIVE_RESET:
1318 TRACE(OTHER, logout("selective reset, selftest address=0x%08x\n", address));
1319 nic_selective_reset(s);
1320 break;
1321 default:
1322 logout("val=0x%08x\n", val);
1323 missing("unknown port selection");
1324 }
1325 }
1326
1327 /*****************************************************************************
1328 *
1329 * General hardware emulation.
1330 *
1331 ****************************************************************************/
1332
1333 static uint8_t eepro100_read1(EEPRO100State * s, uint32_t addr)
1334 {
1335 uint8_t val = 0;
1336 if (addr <= sizeof(s->mem) - sizeof(val)) {
1337 val = s->mem[addr];
1338 }
1339
1340 switch (addr) {
1341 case SCBStatus:
1342 case SCBAck:
1343 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1344 break;
1345 case SCBCmd:
1346 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1347 #if 0
1348 val = eepro100_read_command(s);
1349 #endif
1350 break;
1351 case SCBIntmask:
1352 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1353 break;
1354 case SCBPort + 3:
1355 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1356 break;
1357 case SCBeeprom:
1358 val = eepro100_read_eeprom(s);
1359 break;
1360 case SCBCtrlMDI:
1361 case SCBCtrlMDI + 1:
1362 case SCBCtrlMDI + 2:
1363 case SCBCtrlMDI + 3:
1364 val = (uint8_t)(eepro100_read_mdi(s) >> (8 * (addr & 3)));
1365 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1366 break;
1367 case SCBpmdr: /* Power Management Driver Register */
1368 val = 0;
1369 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1370 break;
1371 case SCBgctrl: /* General Control Register */
1372 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1373 break;
1374 case SCBgstat: /* General Status Register */
1375 /* 100 Mbps full duplex, valid link */
1376 val = 0x07;
1377 TRACE(OTHER, logout("addr=General Status val=%02x\n", val));
1378 break;
1379 default:
1380 logout("addr=%s val=0x%02x\n", regname(addr), val);
1381 missing("unknown byte read");
1382 }
1383 return val;
1384 }
1385
1386 static uint16_t eepro100_read2(EEPRO100State * s, uint32_t addr)
1387 {
1388 uint16_t val = 0;
1389 if (addr <= sizeof(s->mem) - sizeof(val)) {
1390 val = e100_read_reg2(s, addr);
1391 }
1392
1393 switch (addr) {
1394 case SCBStatus:
1395 case SCBCmd:
1396 TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val));
1397 break;
1398 case SCBeeprom:
1399 val = eepro100_read_eeprom(s);
1400 TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val));
1401 break;
1402 case SCBCtrlMDI:
1403 case SCBCtrlMDI + 2:
1404 val = (uint16_t)(eepro100_read_mdi(s) >> (8 * (addr & 3)));
1405 TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val));
1406 break;
1407 default:
1408 logout("addr=%s val=0x%04x\n", regname(addr), val);
1409 missing("unknown word read");
1410 }
1411 return val;
1412 }
1413
1414 static uint32_t eepro100_read4(EEPRO100State * s, uint32_t addr)
1415 {
1416 uint32_t val = 0;
1417 if (addr <= sizeof(s->mem) - sizeof(val)) {
1418 val = e100_read_reg4(s, addr);
1419 }
1420
1421 switch (addr) {
1422 case SCBStatus:
1423 TRACE(OTHER, logout("addr=%s val=0x%08x\n", regname(addr), val));
1424 break;
1425 case SCBPointer:
1426 TRACE(OTHER, logout("addr=%s val=0x%08x\n", regname(addr), val));
1427 break;
1428 case SCBPort:
1429 val = eepro100_read_port(s);
1430 TRACE(OTHER, logout("addr=%s val=0x%08x\n", regname(addr), val));
1431 break;
1432 case SCBflash:
1433 val = eepro100_read_eeprom(s);
1434 TRACE(OTHER, logout("addr=%s val=0x%08x\n", regname(addr), val));
1435 break;
1436 case SCBCtrlMDI:
1437 val = eepro100_read_mdi(s);
1438 break;
1439 default:
1440 logout("addr=%s val=0x%08x\n", regname(addr), val);
1441 missing("unknown longword read");
1442 }
1443 return val;
1444 }
1445
1446 static void eepro100_write1(EEPRO100State * s, uint32_t addr, uint8_t val)
1447 {
1448 /* SCBStatus is readonly. */
1449 if (addr > SCBStatus && addr <= sizeof(s->mem) - sizeof(val)) {
1450 s->mem[addr] = val;
1451 }
1452
1453 switch (addr) {
1454 case SCBStatus:
1455 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1456 break;
1457 case SCBAck:
1458 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1459 eepro100_acknowledge(s);
1460 break;
1461 case SCBCmd:
1462 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1463 eepro100_write_command(s, val);
1464 break;
1465 case SCBIntmask:
1466 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1467 if (val & BIT(1)) {
1468 eepro100_swi_interrupt(s);
1469 }
1470 eepro100_interrupt(s, 0);
1471 break;
1472 case SCBPointer:
1473 case SCBPointer + 1:
1474 case SCBPointer + 2:
1475 case SCBPointer + 3:
1476 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1477 break;
1478 case SCBPort:
1479 case SCBPort + 1:
1480 case SCBPort + 2:
1481 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1482 break;
1483 case SCBPort + 3:
1484 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1485 eepro100_write_port(s);
1486 break;
1487 case SCBFlow: /* does not exist on 82557 */
1488 case SCBFlow + 1:
1489 case SCBFlow + 2:
1490 case SCBpmdr: /* does not exist on 82557 */
1491 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1492 break;
1493 case SCBeeprom:
1494 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1495 eepro100_write_eeprom(s->eeprom, val);
1496 break;
1497 case SCBCtrlMDI:
1498 case SCBCtrlMDI + 1:
1499 case SCBCtrlMDI + 2:
1500 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1501 break;
1502 case SCBCtrlMDI + 3:
1503 TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val));
1504 eepro100_write_mdi(s);
1505 break;
1506 default:
1507 logout("addr=%s val=0x%02x\n", regname(addr), val);
1508 missing("unknown byte write");
1509 }
1510 }
1511
1512 static void eepro100_write2(EEPRO100State * s, uint32_t addr, uint16_t val)
1513 {
1514 /* SCBStatus is readonly. */
1515 if (addr > SCBStatus && addr <= sizeof(s->mem) - sizeof(val)) {
1516 e100_write_reg2(s, addr, val);
1517 }
1518
1519 switch (addr) {
1520 case SCBStatus:
1521 TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val));
1522 s->mem[SCBAck] = (val >> 8);
1523 eepro100_acknowledge(s);
1524 break;
1525 case SCBCmd:
1526 TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val));
1527 eepro100_write_command(s, val);
1528 eepro100_write1(s, SCBIntmask, val >> 8);
1529 break;
1530 case SCBPointer:
1531 case SCBPointer + 2:
1532 TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val));
1533 break;
1534 case SCBPort:
1535 TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val));
1536 break;
1537 case SCBPort + 2:
1538 TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val));
1539 eepro100_write_port(s);
1540 break;
1541 case SCBeeprom:
1542 TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val));
1543 eepro100_write_eeprom(s->eeprom, val);
1544 break;
1545 case SCBCtrlMDI:
1546 TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val));
1547 break;
1548 case SCBCtrlMDI + 2:
1549 TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val));
1550 eepro100_write_mdi(s);
1551 break;
1552 default:
1553 logout("addr=%s val=0x%04x\n", regname(addr), val);
1554 missing("unknown word write");
1555 }
1556 }
1557
1558 static void eepro100_write4(EEPRO100State * s, uint32_t addr, uint32_t val)
1559 {
1560 if (addr <= sizeof(s->mem) - sizeof(val)) {
1561 e100_write_reg4(s, addr, val);
1562 }
1563
1564 switch (addr) {
1565 case SCBPointer:
1566 TRACE(OTHER, logout("addr=%s val=0x%08x\n", regname(addr), val));
1567 break;
1568 case SCBPort:
1569 TRACE(OTHER, logout("addr=%s val=0x%08x\n", regname(addr), val));
1570 eepro100_write_port(s);
1571 break;
1572 case SCBflash:
1573 TRACE(OTHER, logout("addr=%s val=0x%08x\n", regname(addr), val));
1574 val = val >> 16;
1575 eepro100_write_eeprom(s->eeprom, val);
1576 break;
1577 case SCBCtrlMDI:
1578 TRACE(OTHER, logout("addr=%s val=0x%08x\n", regname(addr), val));
1579 eepro100_write_mdi(s);
1580 break;
1581 default:
1582 logout("addr=%s val=0x%08x\n", regname(addr), val);
1583 missing("unknown longword write");
1584 }
1585 }
1586
1587 /*****************************************************************************
1588 *
1589 * Port mapped I/O.
1590 *
1591 ****************************************************************************/
1592
1593 static uint32_t ioport_read1(void *opaque, uint32_t addr)
1594 {
1595 EEPRO100State *s = opaque;
1596 #if 0
1597 logout("addr=%s\n", regname(addr));
1598 #endif
1599 return eepro100_read1(s, addr - s->region1);
1600 }
1601
1602 static uint32_t ioport_read2(void *opaque, uint32_t addr)
1603 {
1604 EEPRO100State *s = opaque;
1605 return eepro100_read2(s, addr - s->region1);
1606 }
1607
1608 static uint32_t ioport_read4(void *opaque, uint32_t addr)
1609 {
1610 EEPRO100State *s = opaque;
1611 return eepro100_read4(s, addr - s->region1);
1612 }
1613
1614 static void ioport_write1(void *opaque, uint32_t addr, uint32_t val)
1615 {
1616 EEPRO100State *s = opaque;
1617 #if 0
1618 logout("addr=%s val=0x%02x\n", regname(addr), val);
1619 #endif
1620 eepro100_write1(s, addr - s->region1, val);
1621 }
1622
1623 static void ioport_write2(void *opaque, uint32_t addr, uint32_t val)
1624 {
1625 EEPRO100State *s = opaque;
1626 eepro100_write2(s, addr - s->region1, val);
1627 }
1628
1629 static void ioport_write4(void *opaque, uint32_t addr, uint32_t val)
1630 {
1631 EEPRO100State *s = opaque;
1632 eepro100_write4(s, addr - s->region1, val);
1633 }
1634
1635 /***********************************************************/
1636 /* PCI EEPRO100 definitions */
1637
1638 static void pci_map(PCIDevice * pci_dev, int region_num,
1639 pcibus_t addr, pcibus_t size, int type)
1640 {
1641 EEPRO100State *s = DO_UPCAST(EEPRO100State, dev, pci_dev);
1642
1643 TRACE(OTHER, logout("region %d, addr=0x%08"FMT_PCIBUS", "
1644 "size=0x%08"FMT_PCIBUS", type=%d\n",
1645 region_num, addr, size, type));
1646
1647 assert(region_num == 1);
1648 register_ioport_write(addr, size, 1, ioport_write1, s);
1649 register_ioport_read(addr, size, 1, ioport_read1, s);
1650 register_ioport_write(addr, size, 2, ioport_write2, s);
1651 register_ioport_read(addr, size, 2, ioport_read2, s);
1652 register_ioport_write(addr, size, 4, ioport_write4, s);
1653 register_ioport_read(addr, size, 4, ioport_read4, s);
1654
1655 s->region1 = addr;
1656 }
1657
1658 /*****************************************************************************
1659 *
1660 * Memory mapped I/O.
1661 *
1662 ****************************************************************************/
1663
1664 static void pci_mmio_writeb(void *opaque, target_phys_addr_t addr, uint32_t val)
1665 {
1666 EEPRO100State *s = opaque;
1667 #if 0
1668 logout("addr=%s val=0x%02x\n", regname(addr), val);
1669 #endif
1670 eepro100_write1(s, addr, val);
1671 }
1672
1673 static void pci_mmio_writew(void *opaque, target_phys_addr_t addr, uint32_t val)
1674 {
1675 EEPRO100State *s = opaque;
1676 #if 0
1677 logout("addr=%s val=0x%02x\n", regname(addr), val);
1678 #endif
1679 eepro100_write2(s, addr, val);
1680 }
1681
1682 static void pci_mmio_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
1683 {
1684 EEPRO100State *s = opaque;
1685 #if 0
1686 logout("addr=%s val=0x%02x\n", regname(addr), val);
1687 #endif
1688 eepro100_write4(s, addr, val);
1689 }
1690
1691 static uint32_t pci_mmio_readb(void *opaque, target_phys_addr_t addr)
1692 {
1693 EEPRO100State *s = opaque;
1694 #if 0
1695 logout("addr=%s\n", regname(addr));
1696 #endif
1697 return eepro100_read1(s, addr);
1698 }
1699
1700 static uint32_t pci_mmio_readw(void *opaque, target_phys_addr_t addr)
1701 {
1702 EEPRO100State *s = opaque;
1703 #if 0
1704 logout("addr=%s\n", regname(addr));
1705 #endif
1706 return eepro100_read2(s, addr);
1707 }
1708
1709 static uint32_t pci_mmio_readl(void *opaque, target_phys_addr_t addr)
1710 {
1711 EEPRO100State *s = opaque;
1712 #if 0
1713 logout("addr=%s\n", regname(addr));
1714 #endif
1715 return eepro100_read4(s, addr);
1716 }
1717
1718 static CPUWriteMemoryFunc * const pci_mmio_write[] = {
1719 pci_mmio_writeb,
1720 pci_mmio_writew,
1721 pci_mmio_writel
1722 };
1723
1724 static CPUReadMemoryFunc * const pci_mmio_read[] = {
1725 pci_mmio_readb,
1726 pci_mmio_readw,
1727 pci_mmio_readl
1728 };
1729
1730 static int nic_can_receive(VLANClientState *nc)
1731 {
1732 EEPRO100State *s = DO_UPCAST(NICState, nc, nc)->opaque;
1733 TRACE(RXTX, logout("%p\n", s));
1734 return get_ru_state(s) == ru_ready;
1735 #if 0
1736 return !eepro100_buffer_full(s);
1737 #endif
1738 }
1739
1740 static ssize_t nic_receive(VLANClientState *nc, const uint8_t * buf, size_t size)
1741 {
1742 /* TODO:
1743 * - Magic packets should set bit 30 in power management driver register.
1744 * - Interesting packets should set bit 29 in power management driver register.
1745 */
1746 EEPRO100State *s = DO_UPCAST(NICState, nc, nc)->opaque;
1747 uint16_t rfd_status = 0xa000;
1748 #if defined(CONFIG_PAD_RECEIVED_FRAMES)
1749 uint8_t min_buf[60];
1750 #endif
1751 static const uint8_t broadcast_macaddr[6] =
1752 { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
1753
1754 #if defined(CONFIG_PAD_RECEIVED_FRAMES)
1755 /* Pad to minimum Ethernet frame length */
1756 if (size < sizeof(min_buf)) {
1757 memcpy(min_buf, buf, size);
1758 memset(&min_buf[size], 0, sizeof(min_buf) - size);
1759 buf = min_buf;
1760 size = sizeof(min_buf);
1761 }
1762 #endif
1763
1764 if (s->configuration[8] & 0x80) {
1765 /* CSMA is disabled. */
1766 logout("%p received while CSMA is disabled\n", s);
1767 return -1;
1768 #if !defined(CONFIG_PAD_RECEIVED_FRAMES)
1769 } else if (size < 64 && (s->configuration[7] & BIT(0))) {
1770 /* Short frame and configuration byte 7/0 (discard short receive) set:
1771 * Short frame is discarded */
1772 logout("%p received short frame (%zu byte)\n", s, size);
1773 s->statistics.rx_short_frame_errors++;
1774 return -1;
1775 #endif
1776 } else if ((size > MAX_ETH_FRAME_SIZE + 4) && !(s->configuration[18] & BIT(3))) {
1777 /* Long frame and configuration byte 18/3 (long receive ok) not set:
1778 * Long frames are discarded. */
1779 logout("%p received long frame (%zu byte), ignored\n", s, size);
1780 return -1;
1781 } else if (memcmp(buf, s->conf.macaddr.a, 6) == 0) { /* !!! */
1782 /* Frame matches individual address. */
1783 /* TODO: check configuration byte 15/4 (ignore U/L). */
1784 TRACE(RXTX, logout("%p received frame for me, len=%zu\n", s, size));
1785 } else if (memcmp(buf, broadcast_macaddr, 6) == 0) {
1786 /* Broadcast frame. */
1787 TRACE(RXTX, logout("%p received broadcast, len=%zu\n", s, size));
1788 rfd_status |= 0x0002;
1789 } else if (buf[0] & 0x01) {
1790 /* Multicast frame. */
1791 TRACE(RXTX, logout("%p received multicast, len=%zu,%s\n", s, size, nic_dump(buf, size)));
1792 if (s->configuration[21] & BIT(3)) {
1793 /* Multicast all bit is set, receive all multicast frames. */
1794 } else {
1795 unsigned mcast_idx = compute_mcast_idx(buf);
1796 assert(mcast_idx < 64);
1797 if (s->mult[mcast_idx >> 3] & (1 << (mcast_idx & 7))) {
1798 /* Multicast frame is allowed in hash table. */
1799 } else if (s->configuration[15] & BIT(0)) {
1800 /* Promiscuous: receive all. */
1801 rfd_status |= 0x0004;
1802 } else {
1803 TRACE(RXTX, logout("%p multicast ignored\n", s));
1804 return -1;
1805 }
1806 }
1807 /* TODO: Next not for promiscuous mode? */
1808 rfd_status |= 0x0002;
1809 } else if (s->configuration[15] & BIT(0)) {
1810 /* Promiscuous: receive all. */
1811 TRACE(RXTX, logout("%p received frame in promiscuous mode, len=%zu\n", s, size));
1812 rfd_status |= 0x0004;
1813 } else if (s->configuration[20] & BIT(6)) {
1814 /* Multiple IA bit set. */
1815 unsigned mcast_idx = compute_mcast_idx(buf);
1816 assert(mcast_idx < 64);
1817 if (s->mult[mcast_idx >> 3] & (1 << (mcast_idx & 7))) {
1818 TRACE(RXTX, logout("%p accepted, multiple IA bit set\n", s));
1819 } else {
1820 TRACE(RXTX, logout("%p frame ignored, multiple IA bit set\n", s));
1821 return -1;
1822 }
1823 } else {
1824 TRACE(RXTX, logout("%p received frame, ignored, len=%zu,%s\n", s, size,
1825 nic_dump(buf, size)));
1826 return size;
1827 }
1828
1829 if (get_ru_state(s) != ru_ready) {
1830 /* No resources available. */
1831 logout("no resources, state=%u\n", get_ru_state(s));
1832 /* TODO: RNR interrupt only at first failed frame? */
1833 eepro100_rnr_interrupt(s);
1834 s->statistics.rx_resource_errors++;
1835 #if 0
1836 assert(!"no resources");
1837 #endif
1838 return -1;
1839 }
1840 /* !!! */
1841 eepro100_rx_t rx;
1842 cpu_physical_memory_read(s->ru_base + s->ru_offset, &rx,
1843 sizeof(eepro100_rx_t));
1844 uint16_t rfd_command = le16_to_cpu(rx.command);
1845 uint16_t rfd_size = le16_to_cpu(rx.size);
1846
1847 if (size > rfd_size) {
1848 logout("Receive buffer (%" PRId16 " bytes) too small for data "
1849 "(%zu bytes); data truncated\n", rfd_size, size);
1850 size = rfd_size;
1851 }
1852 #if !defined(CONFIG_PAD_RECEIVED_FRAMES)
1853 if (size < 64) {
1854 rfd_status |= 0x0080;
1855 }
1856 #endif
1857 TRACE(OTHER, logout("command 0x%04x, link 0x%08x, addr 0x%08x, size %u\n",
1858 rfd_command, rx.link, rx.rx_buf_addr, rfd_size));
1859 e100_stw_le_phys(s->ru_base + s->ru_offset +
1860 offsetof(eepro100_rx_t, status), rfd_status);
1861 e100_stw_le_phys(s->ru_base + s->ru_offset +
1862 offsetof(eepro100_rx_t, count), size);
1863 /* Early receive interrupt not supported. */
1864 #if 0
1865 eepro100_er_interrupt(s);
1866 #endif
1867 /* Receive CRC Transfer not supported. */
1868 if (s->configuration[18] & BIT(2)) {
1869 missing("Receive CRC Transfer");
1870 return -1;
1871 }
1872 /* TODO: check stripping enable bit. */
1873 #if 0
1874 assert(!(s->configuration[17] & BIT(0)));
1875 #endif
1876 cpu_physical_memory_write(s->ru_base + s->ru_offset +
1877 sizeof(eepro100_rx_t), buf, size);
1878 s->statistics.rx_good_frames++;
1879 eepro100_fr_interrupt(s);
1880 s->ru_offset = le32_to_cpu(rx.link);
1881 if (rfd_command & COMMAND_EL) {
1882 /* EL bit is set, so this was the last frame. */
1883 logout("receive: Running out of frames\n");
1884 set_ru_state(s, ru_suspended);
1885 }
1886 if (rfd_command & COMMAND_S) {
1887 /* S bit is set. */
1888 set_ru_state(s, ru_suspended);
1889 }
1890 return size;
1891 }
1892
1893 static const VMStateDescription vmstate_eepro100 = {
1894 .version_id = 3,
1895 .minimum_version_id = 2,
1896 .minimum_version_id_old = 2,
1897 .fields = (VMStateField []) {
1898 VMSTATE_PCI_DEVICE(dev, EEPRO100State),
1899 VMSTATE_UNUSED(32),
1900 VMSTATE_BUFFER(mult, EEPRO100State),
1901 VMSTATE_BUFFER(mem, EEPRO100State),
1902 /* Save all members of struct between scb_stat and mem. */
1903 VMSTATE_UINT8(scb_stat, EEPRO100State),
1904 VMSTATE_UINT8(int_stat, EEPRO100State),
1905 VMSTATE_UNUSED(3*4),
1906 VMSTATE_MACADDR(conf.macaddr, EEPRO100State),
1907 VMSTATE_UNUSED(19*4),
1908 VMSTATE_UINT16_ARRAY(mdimem, EEPRO100State, 32),
1909 /* The eeprom should be saved and restored by its own routines. */
1910 VMSTATE_UINT32(device, EEPRO100State),
1911 /* TODO check device. */
1912 VMSTATE_UINT32(cu_base, EEPRO100State),
1913 VMSTATE_UINT32(cu_offset, EEPRO100State),
1914 VMSTATE_UINT32(ru_base, EEPRO100State),
1915 VMSTATE_UINT32(ru_offset, EEPRO100State),
1916 VMSTATE_UINT32(statsaddr, EEPRO100State),
1917 /* Save eepro100_stats_t statistics. */
1918 VMSTATE_UINT32(statistics.tx_good_frames, EEPRO100State),
1919 VMSTATE_UINT32(statistics.tx_max_collisions, EEPRO100State),
1920 VMSTATE_UINT32(statistics.tx_late_collisions, EEPRO100State),
1921 VMSTATE_UINT32(statistics.tx_underruns, EEPRO100State),
1922 VMSTATE_UINT32(statistics.tx_lost_crs, EEPRO100State),
1923 VMSTATE_UINT32(statistics.tx_deferred, EEPRO100State),
1924 VMSTATE_UINT32(statistics.tx_single_collisions, EEPRO100State),
1925 VMSTATE_UINT32(statistics.tx_multiple_collisions, EEPRO100State),
1926 VMSTATE_UINT32(statistics.tx_total_collisions, EEPRO100State),
1927 VMSTATE_UINT32(statistics.rx_good_frames, EEPRO100State),
1928 VMSTATE_UINT32(statistics.rx_crc_errors, EEPRO100State),
1929 VMSTATE_UINT32(statistics.rx_alignment_errors, EEPRO100State),
1930 VMSTATE_UINT32(statistics.rx_resource_errors, EEPRO100State),
1931 VMSTATE_UINT32(statistics.rx_overrun_errors, EEPRO100State),
1932 VMSTATE_UINT32(statistics.rx_cdt_errors, EEPRO100State),
1933 VMSTATE_UINT32(statistics.rx_short_frame_errors, EEPRO100State),
1934 VMSTATE_UINT32(statistics.fc_xmt_pause, EEPRO100State),
1935 VMSTATE_UINT32(statistics.fc_rcv_pause, EEPRO100State),
1936 VMSTATE_UINT32(statistics.fc_rcv_unsupported, EEPRO100State),
1937 VMSTATE_UINT16(statistics.xmt_tco_frames, EEPRO100State),
1938 VMSTATE_UINT16(statistics.rcv_tco_frames, EEPRO100State),
1939 /* Configuration bytes. */
1940 VMSTATE_BUFFER(configuration, EEPRO100State),
1941 VMSTATE_END_OF_LIST()
1942 }
1943 };
1944
1945 static void nic_cleanup(VLANClientState *nc)
1946 {
1947 EEPRO100State *s = DO_UPCAST(NICState, nc, nc)->opaque;
1948
1949 s->nic = NULL;
1950 }
1951
1952 static int pci_nic_uninit(PCIDevice *pci_dev)
1953 {
1954 EEPRO100State *s = DO_UPCAST(EEPRO100State, dev, pci_dev);
1955
1956 cpu_unregister_io_memory(s->mmio_index);
1957 vmstate_unregister(&pci_dev->qdev, s->vmstate, s);
1958 eeprom93xx_free(&pci_dev->qdev, s->eeprom);
1959 qemu_del_vlan_client(&s->nic->nc);
1960 return 0;
1961 }
1962
1963 static NetClientInfo net_eepro100_info = {
1964 .type = NET_CLIENT_TYPE_NIC,
1965 .size = sizeof(NICState),
1966 .can_receive = nic_can_receive,
1967 .receive = nic_receive,
1968 .cleanup = nic_cleanup,
1969 };
1970
1971 static int e100_nic_init(PCIDevice *pci_dev)
1972 {
1973 EEPRO100State *s = DO_UPCAST(EEPRO100State, dev, pci_dev);
1974 E100PCIDeviceInfo *e100_device = DO_UPCAST(E100PCIDeviceInfo, pci.qdev,
1975 pci_dev->qdev.info);
1976
1977 TRACE(OTHER, logout("\n"));
1978
1979 s->device = e100_device->device;
1980
1981 e100_pci_reset(s, e100_device);
1982
1983 /* Add 64 * 2 EEPROM. i82557 and i82558 support a 64 word EEPROM,
1984 * i82559 and later support 64 or 256 word EEPROM. */
1985 s->eeprom = eeprom93xx_new(&pci_dev->qdev, EEPROM_SIZE);
1986
1987 /* Handler for memory-mapped I/O */
1988 s->mmio_index =
1989 cpu_register_io_memory(pci_mmio_read, pci_mmio_write, s,
1990 DEVICE_LITTLE_ENDIAN);
1991
1992 pci_register_bar_simple(&s->dev, 0, PCI_MEM_SIZE,
1993 PCI_BASE_ADDRESS_MEM_PREFETCH, s->mmio_index);
1994
1995 pci_register_bar(&s->dev, 1, PCI_IO_SIZE, PCI_BASE_ADDRESS_SPACE_IO,
1996 pci_map);
1997 pci_register_bar_simple(&s->dev, 2, PCI_FLASH_SIZE, 0, s->mmio_index);
1998
1999 qemu_macaddr_default_if_unset(&s->conf.macaddr);
2000 logout("macaddr: %s\n", nic_dump(&s->conf.macaddr.a[0], 6));
2001 assert(s->region1 == 0);
2002
2003 nic_reset(s);
2004
2005 s->nic = qemu_new_nic(&net_eepro100_info, &s->conf,
2006 pci_dev->qdev.info->name, pci_dev->qdev.id, s);
2007
2008 qemu_format_nic_info_str(&s->nic->nc, s->conf.macaddr.a);
2009 TRACE(OTHER, logout("%s\n", s->nic->nc.info_str));
2010
2011 qemu_register_reset(nic_reset, s);
2012
2013 s->vmstate = qemu_malloc(sizeof(vmstate_eepro100));
2014 memcpy(s->vmstate, &vmstate_eepro100, sizeof(vmstate_eepro100));
2015 s->vmstate->name = s->nic->nc.model;
2016 vmstate_register(&pci_dev->qdev, -1, s->vmstate, s);
2017
2018 add_boot_device_path(s->conf.bootindex, &pci_dev->qdev, "/ethernet-phy@0");
2019
2020 return 0;
2021 }
2022
2023 static E100PCIDeviceInfo e100_devices[] = {
2024 {
2025 .pci.qdev.name = "i82550",
2026 .pci.qdev.desc = "Intel i82550 Ethernet",
2027 .device = i82550,
2028 /* TODO: check device id. */
2029 .pci.device_id = PCI_DEVICE_ID_INTEL_82551IT,
2030 /* Revision ID: 0x0c, 0x0d, 0x0e. */
2031 .pci.revision = 0x0e,
2032 /* TODO: check size of statistical counters. */
2033 .stats_size = 80,
2034 /* TODO: check extended tcb support. */
2035 .has_extended_tcb_support = true,
2036 .power_management = true,
2037 },{
2038 .pci.qdev.name = "i82551",
2039 .pci.qdev.desc = "Intel i82551 Ethernet",
2040 .device = i82551,
2041 .pci.device_id = PCI_DEVICE_ID_INTEL_82551IT,
2042 /* Revision ID: 0x0f, 0x10. */
2043 .pci.revision = 0x0f,
2044 /* TODO: check size of statistical counters. */
2045 .stats_size = 80,
2046 .has_extended_tcb_support = true,
2047 .power_management = true,
2048 },{
2049 .pci.qdev.name = "i82557a",
2050 .pci.qdev.desc = "Intel i82557A Ethernet",
2051 .device = i82557A,
2052 .pci.device_id = PCI_DEVICE_ID_INTEL_82557,
2053 .pci.revision = 0x01,
2054 .power_management = false,
2055 },{
2056 .pci.qdev.name = "i82557b",
2057 .pci.qdev.desc = "Intel i82557B Ethernet",
2058 .device = i82557B,
2059 .pci.device_id = PCI_DEVICE_ID_INTEL_82557,
2060 .pci.revision = 0x02,
2061 .power_management = false,
2062 },{
2063 .pci.qdev.name = "i82557c",
2064 .pci.qdev.desc = "Intel i82557C Ethernet",
2065 .device = i82557C,
2066 .pci.device_id = PCI_DEVICE_ID_INTEL_82557,
2067 .pci.revision = 0x03,
2068 .power_management = false,
2069 },{
2070 .pci.qdev.name = "i82558a",
2071 .pci.qdev.desc = "Intel i82558A Ethernet",
2072 .device = i82558A,
2073 .pci.device_id = PCI_DEVICE_ID_INTEL_82557,
2074 .pci.revision = 0x04,
2075 .stats_size = 76,
2076 .has_extended_tcb_support = true,
2077 .power_management = true,
2078 },{
2079 .pci.qdev.name = "i82558b",
2080 .pci.qdev.desc = "Intel i82558B Ethernet",
2081 .device = i82558B,
2082 .pci.device_id = PCI_DEVICE_ID_INTEL_82557,
2083 .pci.revision = 0x05,
2084 .stats_size = 76,
2085 .has_extended_tcb_support = true,
2086 .power_management = true,
2087 },{
2088 .pci.qdev.name = "i82559a",
2089 .pci.qdev.desc = "Intel i82559A Ethernet",
2090 .device = i82559A,
2091 .pci.device_id = PCI_DEVICE_ID_INTEL_82557,
2092 .pci.revision = 0x06,
2093 .stats_size = 80,
2094 .has_extended_tcb_support = true,
2095 .power_management = true,
2096 },{
2097 .pci.qdev.name = "i82559b",
2098 .pci.qdev.desc = "Intel i82559B Ethernet",
2099 .device = i82559B,
2100 .pci.device_id = PCI_DEVICE_ID_INTEL_82557,
2101 .pci.revision = 0x07,
2102 .stats_size = 80,
2103 .has_extended_tcb_support = true,
2104 .power_management = true,
2105 },{
2106 .pci.qdev.name = "i82559c",
2107 .pci.qdev.desc = "Intel i82559C Ethernet",
2108 .device = i82559C,
2109 .pci.device_id = PCI_DEVICE_ID_INTEL_82557,
2110 #if 0
2111 .pci.revision = 0x08,
2112 #endif
2113 /* TODO: Windows wants revision id 0x0c. */
2114 .pci.revision = 0x0c,
2115 #if EEPROM_SIZE > 0
2116 .pci.subsystem_vendor_id = PCI_VENDOR_ID_INTEL,
2117 .pci.subsystem_id = 0x0040,
2118 #endif
2119 .stats_size = 80,
2120 .has_extended_tcb_support = true,
2121 .power_management = true,
2122 },{
2123 .pci.qdev.name = "i82559er",
2124 .pci.qdev.desc = "Intel i82559ER Ethernet",
2125 .device = i82559ER,
2126 .pci.device_id = PCI_DEVICE_ID_INTEL_82551IT,
2127 .pci.revision = 0x09,
2128 .stats_size = 80,
2129 .has_extended_tcb_support = true,
2130 .power_management = true,
2131 },{
2132 .pci.qdev.name = "i82562",
2133 .pci.qdev.desc = "Intel i82562 Ethernet",
2134 .device = i82562,
2135 /* TODO: check device id. */
2136 .pci.device_id = PCI_DEVICE_ID_INTEL_82551IT,
2137 /* TODO: wrong revision id. */
2138 .pci.revision = 0x0e,
2139 .stats_size = 80,
2140 .has_extended_tcb_support = true,
2141 .power_management = true,
2142 },{
2143 /* Toshiba Tecra 8200. */
2144 .pci.qdev.name = "i82801",
2145 .pci.qdev.desc = "Intel i82801 Ethernet",
2146 .device = i82801,
2147 .pci.device_id = 0x2449,
2148 .pci.revision = 0x03,
2149 .stats_size = 80,
2150 .has_extended_tcb_support = true,
2151 .power_management = true,
2152 }
2153 };
2154
2155 static Property e100_properties[] = {
2156 DEFINE_NIC_PROPERTIES(EEPRO100State, conf),
2157 DEFINE_PROP_END_OF_LIST(),
2158 };
2159
2160 static void eepro100_register_devices(void)
2161 {
2162 size_t i;
2163 for (i = 0; i < ARRAY_SIZE(e100_devices); i++) {
2164 PCIDeviceInfo *pci_dev = &e100_devices[i].pci;
2165 /* We use the same rom file for all device ids.
2166 QEMU fixes the device id during rom load. */
2167 pci_dev->vendor_id = PCI_VENDOR_ID_INTEL;
2168 pci_dev->class_id = PCI_CLASS_NETWORK_ETHERNET;
2169 pci_dev->romfile = "pxe-eepro100.rom";
2170 pci_dev->init = e100_nic_init;
2171 pci_dev->exit = pci_nic_uninit;
2172 pci_dev->qdev.props = e100_properties;
2173 pci_dev->qdev.size = sizeof(EEPRO100State);
2174 pci_qdev_register(pci_dev);
2175 }
2176 }
2177
2178 device_init(eepro100_register_devices)
QEmu