char/cadence_uart: Delete redundant rx rst logic
[qemu.git] / hw / intc / imx_avic.c
blobfb00e910f61f5fe47c63c45a209a359c8e5ecb28
1 /*
2 * i.MX31 Vectored Interrupt Controller
4 * Note this is NOT the PL192 provided by ARM, but
5 * a custom implementation by Freescale.
7 * Copyright (c) 2008 OKL
8 * Copyright (c) 2011 NICTA Pty Ltd
9 * Originally written by Hans Jiang
11 * This code is licensed under the GPL version 2 or later. See
12 * the COPYING file in the top-level directory.
14 * TODO: implement vectors.
17 #include "hw/hw.h"
18 #include "hw/sysbus.h"
19 #include "qemu/host-utils.h"
21 #define DEBUG_INT 1
22 #undef DEBUG_INT /* comment out for debugging */
24 #ifdef DEBUG_INT
25 #define DPRINTF(fmt, args...) \
26 do { printf("imx_avic: " fmt , ##args); } while (0)
27 #else
28 #define DPRINTF(fmt, args...) do {} while (0)
29 #endif
32 * Define to 1 for messages about attempts to
33 * access unimplemented registers or similar.
35 #define DEBUG_IMPLEMENTATION 1
36 #if DEBUG_IMPLEMENTATION
37 # define IPRINTF(fmt, args...) \
38 do { fprintf(stderr, "imx_avic: " fmt, ##args); } while (0)
39 #else
40 # define IPRINTF(fmt, args...) do {} while (0)
41 #endif
43 #define IMX_AVIC_NUM_IRQS 64
45 /* Interrupt Control Bits */
46 #define ABFLAG (1<<25)
47 #define ABFEN (1<<24)
48 #define NIDIS (1<<22) /* Normal Interrupt disable */
49 #define FIDIS (1<<21) /* Fast interrupt disable */
50 #define NIAD (1<<20) /* Normal Interrupt Arbiter Rise ARM level */
51 #define FIAD (1<<19) /* Fast Interrupt Arbiter Rise ARM level */
52 #define NM (1<<18) /* Normal interrupt mode */
55 #define PRIO_PER_WORD (sizeof(uint32_t) * 8 / 4)
56 #define PRIO_WORDS (IMX_AVIC_NUM_IRQS/PRIO_PER_WORD)
58 #define TYPE_IMX_AVIC "imx_avic"
59 #define IMX_AVIC(obj) \
60 OBJECT_CHECK(IMXAVICState, (obj), TYPE_IMX_AVIC)
62 typedef struct IMXAVICState {
63 SysBusDevice parent_obj;
65 MemoryRegion iomem;
66 uint64_t pending;
67 uint64_t enabled;
68 uint64_t is_fiq;
69 uint32_t intcntl;
70 uint32_t intmask;
71 qemu_irq irq;
72 qemu_irq fiq;
73 uint32_t prio[PRIO_WORDS]; /* Priorities are 4-bits each */
74 } IMXAVICState;
76 static const VMStateDescription vmstate_imx_avic = {
77 .name = "imx-avic",
78 .version_id = 1,
79 .minimum_version_id = 1,
80 .minimum_version_id_old = 1,
81 .fields = (VMStateField[]) {
82 VMSTATE_UINT64(pending, IMXAVICState),
83 VMSTATE_UINT64(enabled, IMXAVICState),
84 VMSTATE_UINT64(is_fiq, IMXAVICState),
85 VMSTATE_UINT32(intcntl, IMXAVICState),
86 VMSTATE_UINT32(intmask, IMXAVICState),
87 VMSTATE_UINT32_ARRAY(prio, IMXAVICState, PRIO_WORDS),
88 VMSTATE_END_OF_LIST()
94 static inline int imx_avic_prio(IMXAVICState *s, int irq)
96 uint32_t word = irq / PRIO_PER_WORD;
97 uint32_t part = 4 * (irq % PRIO_PER_WORD);
98 return 0xf & (s->prio[word] >> part);
101 static inline void imx_avic_set_prio(IMXAVICState *s, int irq, int prio)
103 uint32_t word = irq / PRIO_PER_WORD;
104 uint32_t part = 4 * (irq % PRIO_PER_WORD);
105 uint32_t mask = ~(0xf << part);
106 s->prio[word] &= mask;
107 s->prio[word] |= prio << part;
110 /* Update interrupts. */
111 static void imx_avic_update(IMXAVICState *s)
113 int i;
114 uint64_t new = s->pending & s->enabled;
115 uint64_t flags;
117 flags = new & s->is_fiq;
118 qemu_set_irq(s->fiq, !!flags);
120 flags = new & ~s->is_fiq;
121 if (!flags || (s->intmask == 0x1f)) {
122 qemu_set_irq(s->irq, !!flags);
123 return;
127 * Take interrupt if there's a pending interrupt with
128 * priority higher than the value of intmask
130 for (i = 0; i < IMX_AVIC_NUM_IRQS; i++) {
131 if (flags & (1UL << i)) {
132 if (imx_avic_prio(s, i) > s->intmask) {
133 qemu_set_irq(s->irq, 1);
134 return;
138 qemu_set_irq(s->irq, 0);
141 static void imx_avic_set_irq(void *opaque, int irq, int level)
143 IMXAVICState *s = (IMXAVICState *)opaque;
145 if (level) {
146 DPRINTF("Raising IRQ %d, prio %d\n",
147 irq, imx_avic_prio(s, irq));
148 s->pending |= (1ULL << irq);
149 } else {
150 DPRINTF("Clearing IRQ %d, prio %d\n",
151 irq, imx_avic_prio(s, irq));
152 s->pending &= ~(1ULL << irq);
155 imx_avic_update(s);
159 static uint64_t imx_avic_read(void *opaque,
160 hwaddr offset, unsigned size)
162 IMXAVICState *s = (IMXAVICState *)opaque;
165 DPRINTF("read(offset = 0x%x)\n", offset >> 2);
166 switch (offset >> 2) {
167 case 0: /* INTCNTL */
168 return s->intcntl;
170 case 1: /* Normal Interrupt Mask Register, NIMASK */
171 return s->intmask;
173 case 2: /* Interrupt Enable Number Register, INTENNUM */
174 case 3: /* Interrupt Disable Number Register, INTDISNUM */
175 return 0;
177 case 4: /* Interrupt Enabled Number Register High */
178 return s->enabled >> 32;
180 case 5: /* Interrupt Enabled Number Register Low */
181 return s->enabled & 0xffffffffULL;
183 case 6: /* Interrupt Type Register High */
184 return s->is_fiq >> 32;
186 case 7: /* Interrupt Type Register Low */
187 return s->is_fiq & 0xffffffffULL;
189 case 8: /* Normal Interrupt Priority Register 7 */
190 case 9: /* Normal Interrupt Priority Register 6 */
191 case 10:/* Normal Interrupt Priority Register 5 */
192 case 11:/* Normal Interrupt Priority Register 4 */
193 case 12:/* Normal Interrupt Priority Register 3 */
194 case 13:/* Normal Interrupt Priority Register 2 */
195 case 14:/* Normal Interrupt Priority Register 1 */
196 case 15:/* Normal Interrupt Priority Register 0 */
197 return s->prio[15-(offset>>2)];
199 case 16: /* Normal interrupt vector and status register */
202 * This returns the highest priority
203 * outstanding interrupt. Where there is more than
204 * one pending IRQ with the same priority,
205 * take the highest numbered one.
207 uint64_t flags = s->pending & s->enabled & ~s->is_fiq;
208 int i;
209 int prio = -1;
210 int irq = -1;
211 for (i = 63; i >= 0; --i) {
212 if (flags & (1ULL<<i)) {
213 int irq_prio = imx_avic_prio(s, i);
214 if (irq_prio > prio) {
215 irq = i;
216 prio = irq_prio;
220 if (irq >= 0) {
221 imx_avic_set_irq(s, irq, 0);
222 return irq << 16 | prio;
224 return 0xffffffffULL;
226 case 17:/* Fast Interrupt vector and status register */
228 uint64_t flags = s->pending & s->enabled & s->is_fiq;
229 int i = ctz64(flags);
230 if (i < 64) {
231 imx_avic_set_irq(opaque, i, 0);
232 return i;
234 return 0xffffffffULL;
236 case 18:/* Interrupt source register high */
237 return s->pending >> 32;
239 case 19:/* Interrupt source register low */
240 return s->pending & 0xffffffffULL;
242 case 20:/* Interrupt Force Register high */
243 case 21:/* Interrupt Force Register low */
244 return 0;
246 case 22:/* Normal Interrupt Pending Register High */
247 return (s->pending & s->enabled & ~s->is_fiq) >> 32;
249 case 23:/* Normal Interrupt Pending Register Low */
250 return (s->pending & s->enabled & ~s->is_fiq) & 0xffffffffULL;
252 case 24: /* Fast Interrupt Pending Register High */
253 return (s->pending & s->enabled & s->is_fiq) >> 32;
255 case 25: /* Fast Interrupt Pending Register Low */
256 return (s->pending & s->enabled & s->is_fiq) & 0xffffffffULL;
258 case 0x40: /* AVIC vector 0, use for WFI WAR */
259 return 0x4;
261 default:
262 IPRINTF("imx_avic_read: Bad offset 0x%x\n", (int)offset);
263 return 0;
267 static void imx_avic_write(void *opaque, hwaddr offset,
268 uint64_t val, unsigned size)
270 IMXAVICState *s = (IMXAVICState *)opaque;
272 /* Vector Registers not yet supported */
273 if (offset >= 0x100 && offset <= 0x2fc) {
274 IPRINTF("imx_avic_write to vector register %d ignored\n",
275 (unsigned int)((offset - 0x100) >> 2));
276 return;
279 DPRINTF("imx_avic_write(0x%x) = %x\n",
280 (unsigned int)offset>>2, (unsigned int)val);
281 switch (offset >> 2) {
282 case 0: /* Interrupt Control Register, INTCNTL */
283 s->intcntl = val & (ABFEN | NIDIS | FIDIS | NIAD | FIAD | NM);
284 if (s->intcntl & ABFEN) {
285 s->intcntl &= ~(val & ABFLAG);
287 break;
289 case 1: /* Normal Interrupt Mask Register, NIMASK */
290 s->intmask = val & 0x1f;
291 break;
293 case 2: /* Interrupt Enable Number Register, INTENNUM */
294 DPRINTF("enable(%d)\n", (int)val);
295 val &= 0x3f;
296 s->enabled |= (1ULL << val);
297 break;
299 case 3: /* Interrupt Disable Number Register, INTDISNUM */
300 DPRINTF("disable(%d)\n", (int)val);
301 val &= 0x3f;
302 s->enabled &= ~(1ULL << val);
303 break;
305 case 4: /* Interrupt Enable Number Register High */
306 s->enabled = (s->enabled & 0xffffffffULL) | (val << 32);
307 break;
309 case 5: /* Interrupt Enable Number Register Low */
310 s->enabled = (s->enabled & 0xffffffff00000000ULL) | val;
311 break;
313 case 6: /* Interrupt Type Register High */
314 s->is_fiq = (s->is_fiq & 0xffffffffULL) | (val << 32);
315 break;
317 case 7: /* Interrupt Type Register Low */
318 s->is_fiq = (s->is_fiq & 0xffffffff00000000ULL) | val;
319 break;
321 case 8: /* Normal Interrupt Priority Register 7 */
322 case 9: /* Normal Interrupt Priority Register 6 */
323 case 10:/* Normal Interrupt Priority Register 5 */
324 case 11:/* Normal Interrupt Priority Register 4 */
325 case 12:/* Normal Interrupt Priority Register 3 */
326 case 13:/* Normal Interrupt Priority Register 2 */
327 case 14:/* Normal Interrupt Priority Register 1 */
328 case 15:/* Normal Interrupt Priority Register 0 */
329 s->prio[15-(offset>>2)] = val;
330 break;
332 /* Read-only registers, writes ignored */
333 case 16:/* Normal Interrupt Vector and Status register */
334 case 17:/* Fast Interrupt vector and status register */
335 case 18:/* Interrupt source register high */
336 case 19:/* Interrupt source register low */
337 return;
339 case 20:/* Interrupt Force Register high */
340 s->pending = (s->pending & 0xffffffffULL) | (val << 32);
341 break;
343 case 21:/* Interrupt Force Register low */
344 s->pending = (s->pending & 0xffffffff00000000ULL) | val;
345 break;
347 case 22:/* Normal Interrupt Pending Register High */
348 case 23:/* Normal Interrupt Pending Register Low */
349 case 24: /* Fast Interrupt Pending Register High */
350 case 25: /* Fast Interrupt Pending Register Low */
351 return;
353 default:
354 IPRINTF("imx_avic_write: Bad offset %x\n", (int)offset);
356 imx_avic_update(s);
359 static const MemoryRegionOps imx_avic_ops = {
360 .read = imx_avic_read,
361 .write = imx_avic_write,
362 .endianness = DEVICE_NATIVE_ENDIAN,
365 static void imx_avic_reset(DeviceState *dev)
367 IMXAVICState *s = IMX_AVIC(dev);
369 s->pending = 0;
370 s->enabled = 0;
371 s->is_fiq = 0;
372 s->intmask = 0x1f;
373 s->intcntl = 0;
374 memset(s->prio, 0, sizeof s->prio);
377 static int imx_avic_init(SysBusDevice *sbd)
379 DeviceState *dev = DEVICE(sbd);
380 IMXAVICState *s = IMX_AVIC(dev);
382 memory_region_init_io(&s->iomem, OBJECT(s), &imx_avic_ops, s,
383 "imx_avic", 0x1000);
384 sysbus_init_mmio(sbd, &s->iomem);
386 qdev_init_gpio_in(dev, imx_avic_set_irq, IMX_AVIC_NUM_IRQS);
387 sysbus_init_irq(sbd, &s->irq);
388 sysbus_init_irq(sbd, &s->fiq);
390 return 0;
394 static void imx_avic_class_init(ObjectClass *klass, void *data)
396 DeviceClass *dc = DEVICE_CLASS(klass);
397 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
398 k->init = imx_avic_init;
399 dc->vmsd = &vmstate_imx_avic;
400 dc->reset = imx_avic_reset;
401 dc->desc = "i.MX Advanced Vector Interrupt Controller";
404 static const TypeInfo imx_avic_info = {
405 .name = TYPE_IMX_AVIC,
406 .parent = TYPE_SYS_BUS_DEVICE,
407 .instance_size = sizeof(IMXAVICState),
408 .class_init = imx_avic_class_init,
411 static void imx_avic_register_types(void)
413 type_register_static(&imx_avic_info);
416 type_init(imx_avic_register_types)