include/hw/ppc/spapr.h

   1 #ifndef HW_SPAPR_H
   2 #define HW_SPAPR_H
   3
   4 #include "sysemu/dma.h"
   5 #include "hw/boards.h"
   6 #include "hw/ppc/xics.h"
   7 #include "hw/ppc/spapr_drc.h"
   8 #include "hw/mem/pc-dimm.h"
   9 #include "hw/ppc/spapr_ovec.h"
  10
  11 struct VIOsPAPRBus;
  12 struct sPAPRPHBState;
  13 struct sPAPRNVRAM;
  14 typedef struct sPAPRConfigureConnectorState sPAPRConfigureConnectorState;
  15 typedef struct sPAPREventLogEntry sPAPREventLogEntry;
  16 typedef struct sPAPREventSource sPAPREventSource;
  17
  18 #define HPTE64_V_HPTE_DIRTY     0x0000000000000040ULL
  19 #define SPAPR_ENTRY_POINT       0x100
  20
  21 #define SPAPR_TIMEBASE_FREQ     512000000ULL
  22
  23 typedef struct sPAPRMachineClass sPAPRMachineClass;
  24
  25 #define TYPE_SPAPR_MACHINE      "spapr-machine"
  26 #define SPAPR_MACHINE(obj) \
  27     OBJECT_CHECK(sPAPRMachineState, (obj), TYPE_SPAPR_MACHINE)
  28 #define SPAPR_MACHINE_GET_CLASS(obj) \
  29     OBJECT_GET_CLASS(sPAPRMachineClass, obj, TYPE_SPAPR_MACHINE)
  30 #define SPAPR_MACHINE_CLASS(klass) \
  31     OBJECT_CLASS_CHECK(sPAPRMachineClass, klass, TYPE_SPAPR_MACHINE)
  32
  33 /**
  34  * sPAPRMachineClass:
  35  */
  36 struct sPAPRMachineClass {
  37     /*< private >*/
  38     MachineClass parent_class;
  39
  40     /*< public >*/
  41     bool dr_lmb_enabled;       /* enable dynamic-reconfig/hotplug of LMBs */
  42     bool use_ohci_by_default;  /* use USB-OHCI instead of XHCI */
  43     const char *tcg_default_cpu; /* which (TCG) CPU to simulate by default */
  44     void (*phb_placement)(sPAPRMachineState *spapr, uint32_t index,
  45                           uint64_t *buid, hwaddr *pio,
  46                           hwaddr *mmio32, hwaddr *mmio64,
  47                           unsigned n_dma, uint32_t *liobns, Error **errp);
  48 };
  49
  50 /**
  51  * sPAPRMachineState:
  52  */
  53 struct sPAPRMachineState {
  54     /*< private >*/
  55     MachineState parent_obj;
  56
  57     struct VIOsPAPRBus *vio_bus;
  58     QLIST_HEAD(, sPAPRPHBState) phbs;
  59     struct sPAPRNVRAM *nvram;
  60     ICSState *ics;
  61     DeviceState *rtc;
  62
  63     void *htab;
  64     uint32_t htab_shift;
  65     uint64_t patb_entry; /* Process tbl registed in H_REGISTER_PROCESS_TABLE */
  66     hwaddr rma_size;
  67     int vrma_adjust;
  68     ssize_t rtas_size;
  69     void *rtas_blob;
  70     long kernel_size;
  71     bool kernel_le;
  72     uint32_t initrd_base;
  73     long initrd_size;
  74     uint64_t rtc_offset; /* Now used only during incoming migration */
  75     struct PPCTimebase tb;
  76     bool has_graphics;
  77     sPAPROptionVector *ov5;         /* QEMU-supported option vectors */
  78     sPAPROptionVector *ov5_cas;     /* negotiated (via CAS) option vectors */
  79     bool cas_reboot;
  80
  81     Notifier epow_notifier;
  82     QTAILQ_HEAD(, sPAPREventLogEntry) pending_events;
  83     bool use_hotplug_event_source;
  84     sPAPREventSource *event_sources;
  85
  86     /* Migration state */
  87     int htab_save_index;
  88     bool htab_first_pass;
  89     int htab_fd;
  90
  91     /* RTAS state */
  92     QTAILQ_HEAD(, sPAPRConfigureConnectorState) ccs_list;
  93
  94     /*< public >*/
  95     char *kvm_type;
  96     MemoryHotplugState hotplug_memory;
  97
  98     uint32_t nr_servers;
  99     ICPState *icps;
 100 };
 101
 102 #define H_SUCCESS         0
 103 #define H_BUSY            1        /* Hardware busy -- retry later */
 104 #define H_CLOSED          2        /* Resource closed */
 105 #define H_NOT_AVAILABLE   3
 106 #define H_CONSTRAINED     4        /* Resource request constrained to max allowed */
 107 #define H_PARTIAL         5
 108 #define H_IN_PROGRESS     14       /* Kind of like busy */
 109 #define H_PAGE_REGISTERED 15
 110 #define H_PARTIAL_STORE   16
 111 #define H_PENDING         17       /* returned from H_POLL_PENDING */
 112 #define H_CONTINUE        18       /* Returned from H_Join on success */
 113 #define H_LONG_BUSY_START_RANGE         9900  /* Start of long busy range */
 114 #define H_LONG_BUSY_ORDER_1_MSEC        9900  /* Long busy, hint that 1msec \
 115                                                  is a good time to retry */
 116 #define H_LONG_BUSY_ORDER_10_MSEC       9901  /* Long busy, hint that 10msec \
 117                                                  is a good time to retry */
 118 #define H_LONG_BUSY_ORDER_100_MSEC      9902  /* Long busy, hint that 100msec \
 119                                                  is a good time to retry */
 120 #define H_LONG_BUSY_ORDER_1_SEC         9903  /* Long busy, hint that 1sec \
 121                                                  is a good time to retry */
 122 #define H_LONG_BUSY_ORDER_10_SEC        9904  /* Long busy, hint that 10sec \
 123                                                  is a good time to retry */
 124 #define H_LONG_BUSY_ORDER_100_SEC       9905  /* Long busy, hint that 100sec \
 125                                                  is a good time to retry */
 126 #define H_LONG_BUSY_END_RANGE           9905  /* End of long busy range */
 127 #define H_HARDWARE        -1       /* Hardware error */
 128 #define H_FUNCTION        -2       /* Function not supported */
 129 #define H_PRIVILEGE       -3       /* Caller not privileged */
 130 #define H_PARAMETER       -4       /* Parameter invalid, out-of-range or conflicting */
 131 #define H_BAD_MODE        -5       /* Illegal msr value */
 132 #define H_PTEG_FULL       -6       /* PTEG is full */
 133 #define H_NOT_FOUND       -7       /* PTE was not found" */
 134 #define H_RESERVED_DABR   -8       /* DABR address is reserved by the hypervisor on this processor" */
 135 #define H_NO_MEM          -9
 136 #define H_AUTHORITY       -10
 137 #define H_PERMISSION      -11
 138 #define H_DROPPED         -12
 139 #define H_SOURCE_PARM     -13
 140 #define H_DEST_PARM       -14
 141 #define H_REMOTE_PARM     -15
 142 #define H_RESOURCE        -16
 143 #define H_ADAPTER_PARM    -17
 144 #define H_RH_PARM         -18
 145 #define H_RCQ_PARM        -19
 146 #define H_SCQ_PARM        -20
 147 #define H_EQ_PARM         -21
 148 #define H_RT_PARM         -22
 149 #define H_ST_PARM         -23
 150 #define H_SIGT_PARM       -24
 151 #define H_TOKEN_PARM      -25
 152 #define H_MLENGTH_PARM    -27
 153 #define H_MEM_PARM        -28
 154 #define H_MEM_ACCESS_PARM -29
 155 #define H_ATTR_PARM       -30
 156 #define H_PORT_PARM       -31
 157 #define H_MCG_PARM        -32
 158 #define H_VL_PARM         -33
 159 #define H_TSIZE_PARM      -34
 160 #define H_TRACE_PARM      -35
 161
 162 #define H_MASK_PARM       -37
 163 #define H_MCG_FULL        -38
 164 #define H_ALIAS_EXIST     -39
 165 #define H_P_COUNTER       -40
 166 #define H_TABLE_FULL      -41
 167 #define H_ALT_TABLE       -42
 168 #define H_MR_CONDITION    -43
 169 #define H_NOT_ENOUGH_RESOURCES -44
 170 #define H_R_STATE         -45
 171 #define H_RESCINDEND      -46
 172 #define H_P2              -55
 173 #define H_P3              -56
 174 #define H_P4              -57
 175 #define H_P5              -58
 176 #define H_P6              -59
 177 #define H_P7              -60
 178 #define H_P8              -61
 179 #define H_P9              -62
 180 #define H_UNSUPPORTED_FLAG -256
 181 #define H_MULTI_THREADS_ACTIVE -9005
 182
 183
 184 /* Long Busy is a condition that can be returned by the firmware
 185  * when a call cannot be completed now, but the identical call
 186  * should be retried later.  This prevents calls blocking in the
 187  * firmware for long periods of time.  Annoyingly the firmware can return
 188  * a range of return codes, hinting at how long we should wait before
 189  * retrying.  If you don't care for the hint, the macro below is a good
 190  * way to check for the long_busy return codes
 191  */
 192 #define H_IS_LONG_BUSY(x)  ((x >= H_LONG_BUSY_START_RANGE) \
 193                             && (x <= H_LONG_BUSY_END_RANGE))
 194
 195 /* Flags */
 196 #define H_LARGE_PAGE      (1ULL<<(63-16))
 197 #define H_EXACT           (1ULL<<(63-24))       /* Use exact PTE or return H_PTEG_FULL */
 198 #define H_R_XLATE         (1ULL<<(63-25))       /* include a valid logical page num in the pte if the valid bit is set */
 199 #define H_READ_4          (1ULL<<(63-26))       /* Return 4 PTEs */
 200 #define H_PAGE_STATE_CHANGE (1ULL<<(63-28))
 201 #define H_PAGE_UNUSED     ((1ULL<<(63-29)) | (1ULL<<(63-30)))
 202 #define H_PAGE_SET_UNUSED (H_PAGE_STATE_CHANGE | H_PAGE_UNUSED)
 203 #define H_PAGE_SET_LOANED (H_PAGE_SET_UNUSED | (1ULL<<(63-31)))
 204 #define H_PAGE_SET_ACTIVE H_PAGE_STATE_CHANGE
 205 #define H_AVPN            (1ULL<<(63-32))       /* An avpn is provided as a sanity test */
 206 #define H_ANDCOND         (1ULL<<(63-33))
 207 #define H_ICACHE_INVALIDATE (1ULL<<(63-40))     /* icbi, etc.  (ignored for IO pages) */
 208 #define H_ICACHE_SYNCHRONIZE (1ULL<<(63-41))    /* dcbst, icbi, etc (ignored for IO pages */
 209 #define H_ZERO_PAGE       (1ULL<<(63-48))       /* zero the page before mapping (ignored for IO pages) */
 210 #define H_COPY_PAGE       (1ULL<<(63-49))
 211 #define H_N               (1ULL<<(63-61))
 212 #define H_PP1             (1ULL<<(63-62))
 213 #define H_PP2             (1ULL<<(63-63))
 214
 215 /* Values for 2nd argument to H_SET_MODE */
 216 #define H_SET_MODE_RESOURCE_SET_CIABR           1
 217 #define H_SET_MODE_RESOURCE_SET_DAWR            2
 218 #define H_SET_MODE_RESOURCE_ADDR_TRANS_MODE     3
 219 #define H_SET_MODE_RESOURCE_LE                  4
 220
 221 /* Flags for H_SET_MODE_RESOURCE_LE */
 222 #define H_SET_MODE_ENDIAN_BIG    0
 223 #define H_SET_MODE_ENDIAN_LITTLE 1
 224
 225 /* VASI States */
 226 #define H_VASI_INVALID    0
 227 #define H_VASI_ENABLED    1
 228 #define H_VASI_ABORTED    2
 229 #define H_VASI_SUSPENDING 3
 230 #define H_VASI_SUSPENDED  4
 231 #define H_VASI_RESUMED    5
 232 #define H_VASI_COMPLETED  6
 233
 234 /* DABRX flags */
 235 #define H_DABRX_HYPERVISOR (1ULL<<(63-61))
 236 #define H_DABRX_KERNEL     (1ULL<<(63-62))
 237 #define H_DABRX_USER       (1ULL<<(63-63))
 238
 239 /* Each control block has to be on a 4K boundary */
 240 #define H_CB_ALIGNMENT     4096
 241
 242 /* pSeries hypervisor opcodes */
 243 #define H_REMOVE                0x04
 244 #define H_ENTER                 0x08
 245 #define H_READ                  0x0c
 246 #define H_CLEAR_MOD             0x10
 247 #define H_CLEAR_REF             0x14
 248 #define H_PROTECT               0x18
 249 #define H_GET_TCE               0x1c
 250 #define H_PUT_TCE               0x20
 251 #define H_SET_SPRG0             0x24
 252 #define H_SET_DABR              0x28
 253 #define H_PAGE_INIT             0x2c
 254 #define H_SET_ASR               0x30
 255 #define H_ASR_ON                0x34
 256 #define H_ASR_OFF               0x38
 257 #define H_LOGICAL_CI_LOAD       0x3c
 258 #define H_LOGICAL_CI_STORE      0x40
 259 #define H_LOGICAL_CACHE_LOAD    0x44
 260 #define H_LOGICAL_CACHE_STORE   0x48
 261 #define H_LOGICAL_ICBI          0x4c
 262 #define H_LOGICAL_DCBF          0x50
 263 #define H_GET_TERM_CHAR         0x54
 264 #define H_PUT_TERM_CHAR         0x58
 265 #define H_REAL_TO_LOGICAL       0x5c
 266 #define H_HYPERVISOR_DATA       0x60
 267 #define H_EOI                   0x64
 268 #define H_CPPR                  0x68
 269 #define H_IPI                   0x6c
 270 #define H_IPOLL                 0x70
 271 #define H_XIRR                  0x74
 272 #define H_PERFMON               0x7c
 273 #define H_MIGRATE_DMA           0x78
 274 #define H_REGISTER_VPA          0xDC
 275 #define H_CEDE                  0xE0
 276 #define H_CONFER                0xE4
 277 #define H_PROD                  0xE8
 278 #define H_GET_PPP               0xEC
 279 #define H_SET_PPP               0xF0
 280 #define H_PURR                  0xF4
 281 #define H_PIC                   0xF8
 282 #define H_REG_CRQ               0xFC
 283 #define H_FREE_CRQ              0x100
 284 #define H_VIO_SIGNAL            0x104
 285 #define H_SEND_CRQ              0x108
 286 #define H_COPY_RDMA             0x110
 287 #define H_REGISTER_LOGICAL_LAN  0x114
 288 #define H_FREE_LOGICAL_LAN      0x118
 289 #define H_ADD_LOGICAL_LAN_BUFFER 0x11C
 290 #define H_SEND_LOGICAL_LAN      0x120
 291 #define H_BULK_REMOVE           0x124
 292 #define H_MULTICAST_CTRL        0x130
 293 #define H_SET_XDABR             0x134
 294 #define H_STUFF_TCE             0x138
 295 #define H_PUT_TCE_INDIRECT      0x13C
 296 #define H_CHANGE_LOGICAL_LAN_MAC 0x14C
 297 #define H_VTERM_PARTNER_INFO    0x150
 298 #define H_REGISTER_VTERM        0x154
 299 #define H_FREE_VTERM            0x158
 300 #define H_RESET_EVENTS          0x15C
 301 #define H_ALLOC_RESOURCE        0x160
 302 #define H_FREE_RESOURCE         0x164
 303 #define H_MODIFY_QP             0x168
 304 #define H_QUERY_QP              0x16C
 305 #define H_REREGISTER_PMR        0x170
 306 #define H_REGISTER_SMR          0x174
 307 #define H_QUERY_MR              0x178
 308 #define H_QUERY_MW              0x17C
 309 #define H_QUERY_HCA             0x180
 310 #define H_QUERY_PORT            0x184
 311 #define H_MODIFY_PORT           0x188
 312 #define H_DEFINE_AQP1           0x18C
 313 #define H_GET_TRACE_BUFFER      0x190
 314 #define H_DEFINE_AQP0           0x194
 315 #define H_RESIZE_MR             0x198
 316 #define H_ATTACH_MCQP           0x19C
 317 #define H_DETACH_MCQP           0x1A0
 318 #define H_CREATE_RPT            0x1A4
 319 #define H_REMOVE_RPT            0x1A8
 320 #define H_REGISTER_RPAGES       0x1AC
 321 #define H_DISABLE_AND_GETC      0x1B0
 322 #define H_ERROR_DATA            0x1B4
 323 #define H_GET_HCA_INFO          0x1B8
 324 #define H_GET_PERF_COUNT        0x1BC
 325 #define H_MANAGE_TRACE          0x1C0
 326 #define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
 327 #define H_QUERY_INT_STATE       0x1E4
 328 #define H_POLL_PENDING          0x1D8
 329 #define H_ILLAN_ATTRIBUTES      0x244
 330 #define H_MODIFY_HEA_QP         0x250
 331 #define H_QUERY_HEA_QP          0x254
 332 #define H_QUERY_HEA             0x258
 333 #define H_QUERY_HEA_PORT        0x25C
 334 #define H_MODIFY_HEA_PORT       0x260
 335 #define H_REG_BCMC              0x264
 336 #define H_DEREG_BCMC            0x268
 337 #define H_REGISTER_HEA_RPAGES   0x26C
 338 #define H_DISABLE_AND_GET_HEA   0x270
 339 #define H_GET_HEA_INFO          0x274
 340 #define H_ALLOC_HEA_RESOURCE    0x278
 341 #define H_ADD_CONN              0x284
 342 #define H_DEL_CONN              0x288
 343 #define H_JOIN                  0x298
 344 #define H_VASI_STATE            0x2A4
 345 #define H_ENABLE_CRQ            0x2B0
 346 #define H_GET_EM_PARMS          0x2B8
 347 #define H_SET_MPP               0x2D0
 348 #define H_GET_MPP               0x2D4
 349 #define H_XIRR_X                0x2FC
 350 #define H_RANDOM                0x300
 351 #define H_SET_MODE              0x31C
 352 #define H_SIGNAL_SYS_RESET      0x380
 353 #define MAX_HCALL_OPCODE        H_SIGNAL_SYS_RESET
 354
 355 /* The hcalls above are standardized in PAPR and implemented by pHyp
 356  * as well.
 357  *
 358  * We also need some hcalls which are specific to qemu / KVM-on-POWER.
 359  * So far we just need one for H_RTAS, but in future we'll need more
 360  * for extensions like virtio.  We put those into the 0xf000-0xfffc
 361  * range which is reserved by PAPR for "platform-specific" hcalls.
 362  */
 363 #define KVMPPC_HCALL_BASE       0xf000
 364 #define KVMPPC_H_RTAS           (KVMPPC_HCALL_BASE + 0x0)
 365 #define KVMPPC_H_LOGICAL_MEMOP  (KVMPPC_HCALL_BASE + 0x1)
 366 /* Client Architecture support */
 367 #define KVMPPC_H_CAS            (KVMPPC_HCALL_BASE + 0x2)
 368 #define KVMPPC_HCALL_MAX        KVMPPC_H_CAS
 369
 370 typedef struct sPAPRDeviceTreeUpdateHeader {
 371     uint32_t version_id;
 372 } sPAPRDeviceTreeUpdateHeader;
 373
 374 #define hcall_dprintf(fmt, ...) \
 375     do { \
 376         qemu_log_mask(LOG_GUEST_ERROR, "%s: " fmt, __func__, ## __VA_ARGS__); \
 377     } while (0)
 378
 379 typedef target_ulong (*spapr_hcall_fn)(PowerPCCPU *cpu, sPAPRMachineState *sm,
 380                                        target_ulong opcode,
 381                                        target_ulong *args);
 382
 383 void spapr_register_hypercall(target_ulong opcode, spapr_hcall_fn fn);
 384 target_ulong spapr_hypercall(PowerPCCPU *cpu, target_ulong opcode,
 385                              target_ulong *args);
 386
 387 /* ibm,set-eeh-option */
 388 #define RTAS_EEH_DISABLE                 0
 389 #define RTAS_EEH_ENABLE                  1
 390 #define RTAS_EEH_THAW_IO                 2
 391 #define RTAS_EEH_THAW_DMA                3
 392
 393 /* ibm,get-config-addr-info2 */
 394 #define RTAS_GET_PE_ADDR                 0
 395 #define RTAS_GET_PE_MODE                 1
 396 #define RTAS_PE_MODE_NONE                0
 397 #define RTAS_PE_MODE_NOT_SHARED          1
 398 #define RTAS_PE_MODE_SHARED              2
 399
 400 /* ibm,read-slot-reset-state2 */
 401 #define RTAS_EEH_PE_STATE_NORMAL         0
 402 #define RTAS_EEH_PE_STATE_RESET          1
 403 #define RTAS_EEH_PE_STATE_STOPPED_IO_DMA 2
 404 #define RTAS_EEH_PE_STATE_STOPPED_DMA    4
 405 #define RTAS_EEH_PE_STATE_UNAVAIL        5
 406 #define RTAS_EEH_NOT_SUPPORT             0
 407 #define RTAS_EEH_SUPPORT                 1
 408 #define RTAS_EEH_PE_UNAVAIL_INFO         1000
 409 #define RTAS_EEH_PE_RECOVER_INFO         0
 410
 411 /* ibm,set-slot-reset */
 412 #define RTAS_SLOT_RESET_DEACTIVATE       0
 413 #define RTAS_SLOT_RESET_HOT              1
 414 #define RTAS_SLOT_RESET_FUNDAMENTAL      3
 415
 416 /* ibm,slot-error-detail */
 417 #define RTAS_SLOT_TEMP_ERR_LOG           1
 418 #define RTAS_SLOT_PERM_ERR_LOG           2
 419
 420 /* RTAS return codes */
 421 #define RTAS_OUT_SUCCESS                        0
 422 #define RTAS_OUT_NO_ERRORS_FOUND                1
 423 #define RTAS_OUT_HW_ERROR                       -1
 424 #define RTAS_OUT_BUSY                           -2
 425 #define RTAS_OUT_PARAM_ERROR                    -3
 426 #define RTAS_OUT_NOT_SUPPORTED                  -3
 427 #define RTAS_OUT_NO_SUCH_INDICATOR              -3
 428 #define RTAS_OUT_NOT_AUTHORIZED                 -9002
 429 #define RTAS_OUT_SYSPARM_PARAM_ERROR            -9999
 430
 431 /* DDW pagesize mask values from ibm,query-pe-dma-window */
 432 #define RTAS_DDW_PGSIZE_4K       0x01
 433 #define RTAS_DDW_PGSIZE_64K      0x02
 434 #define RTAS_DDW_PGSIZE_16M      0x04
 435 #define RTAS_DDW_PGSIZE_32M      0x08
 436 #define RTAS_DDW_PGSIZE_64M      0x10
 437 #define RTAS_DDW_PGSIZE_128M     0x20
 438 #define RTAS_DDW_PGSIZE_256M     0x40
 439 #define RTAS_DDW_PGSIZE_16G      0x80
 440
 441 /* RTAS tokens */
 442 #define RTAS_TOKEN_BASE      0x2000
 443
 444 #define RTAS_DISPLAY_CHARACTER                  (RTAS_TOKEN_BASE + 0x00)
 445 #define RTAS_GET_TIME_OF_DAY                    (RTAS_TOKEN_BASE + 0x01)
 446 #define RTAS_SET_TIME_OF_DAY                    (RTAS_TOKEN_BASE + 0x02)
 447 #define RTAS_POWER_OFF                          (RTAS_TOKEN_BASE + 0x03)
 448 #define RTAS_SYSTEM_REBOOT                      (RTAS_TOKEN_BASE + 0x04)
 449 #define RTAS_QUERY_CPU_STOPPED_STATE            (RTAS_TOKEN_BASE + 0x05)
 450 #define RTAS_START_CPU                          (RTAS_TOKEN_BASE + 0x06)
 451 #define RTAS_STOP_SELF                          (RTAS_TOKEN_BASE + 0x07)
 452 #define RTAS_IBM_GET_SYSTEM_PARAMETER           (RTAS_TOKEN_BASE + 0x08)
 453 #define RTAS_IBM_SET_SYSTEM_PARAMETER           (RTAS_TOKEN_BASE + 0x09)
 454 #define RTAS_IBM_SET_XIVE                       (RTAS_TOKEN_BASE + 0x0A)
 455 #define RTAS_IBM_GET_XIVE                       (RTAS_TOKEN_BASE + 0x0B)
 456 #define RTAS_IBM_INT_OFF                        (RTAS_TOKEN_BASE + 0x0C)
 457 #define RTAS_IBM_INT_ON                         (RTAS_TOKEN_BASE + 0x0D)
 458 #define RTAS_CHECK_EXCEPTION                    (RTAS_TOKEN_BASE + 0x0E)
 459 #define RTAS_EVENT_SCAN                         (RTAS_TOKEN_BASE + 0x0F)
 460 #define RTAS_IBM_SET_TCE_BYPASS                 (RTAS_TOKEN_BASE + 0x10)
 461 #define RTAS_QUIESCE                            (RTAS_TOKEN_BASE + 0x11)
 462 #define RTAS_NVRAM_FETCH                        (RTAS_TOKEN_BASE + 0x12)
 463 #define RTAS_NVRAM_STORE                        (RTAS_TOKEN_BASE + 0x13)
 464 #define RTAS_READ_PCI_CONFIG                    (RTAS_TOKEN_BASE + 0x14)
 465 #define RTAS_WRITE_PCI_CONFIG                   (RTAS_TOKEN_BASE + 0x15)
 466 #define RTAS_IBM_READ_PCI_CONFIG                (RTAS_TOKEN_BASE + 0x16)
 467 #define RTAS_IBM_WRITE_PCI_CONFIG               (RTAS_TOKEN_BASE + 0x17)
 468 #define RTAS_IBM_QUERY_INTERRUPT_SOURCE_NUMBER  (RTAS_TOKEN_BASE + 0x18)
 469 #define RTAS_IBM_CHANGE_MSI                     (RTAS_TOKEN_BASE + 0x19)
 470 #define RTAS_SET_INDICATOR                      (RTAS_TOKEN_BASE + 0x1A)
 471 #define RTAS_SET_POWER_LEVEL                    (RTAS_TOKEN_BASE + 0x1B)
 472 #define RTAS_GET_POWER_LEVEL                    (RTAS_TOKEN_BASE + 0x1C)
 473 #define RTAS_GET_SENSOR_STATE                   (RTAS_TOKEN_BASE + 0x1D)
 474 #define RTAS_IBM_CONFIGURE_CONNECTOR            (RTAS_TOKEN_BASE + 0x1E)
 475 #define RTAS_IBM_OS_TERM                        (RTAS_TOKEN_BASE + 0x1F)
 476 #define RTAS_IBM_SET_EEH_OPTION                 (RTAS_TOKEN_BASE + 0x20)
 477 #define RTAS_IBM_GET_CONFIG_ADDR_INFO2          (RTAS_TOKEN_BASE + 0x21)
 478 #define RTAS_IBM_READ_SLOT_RESET_STATE2         (RTAS_TOKEN_BASE + 0x22)
 479 #define RTAS_IBM_SET_SLOT_RESET                 (RTAS_TOKEN_BASE + 0x23)
 480 #define RTAS_IBM_CONFIGURE_PE                   (RTAS_TOKEN_BASE + 0x24)
 481 #define RTAS_IBM_SLOT_ERROR_DETAIL              (RTAS_TOKEN_BASE + 0x25)
 482 #define RTAS_IBM_QUERY_PE_DMA_WINDOW            (RTAS_TOKEN_BASE + 0x26)
 483 #define RTAS_IBM_CREATE_PE_DMA_WINDOW           (RTAS_TOKEN_BASE + 0x27)
 484 #define RTAS_IBM_REMOVE_PE_DMA_WINDOW           (RTAS_TOKEN_BASE + 0x28)
 485 #define RTAS_IBM_RESET_PE_DMA_WINDOW            (RTAS_TOKEN_BASE + 0x29)
 486
 487 #define RTAS_TOKEN_MAX                          (RTAS_TOKEN_BASE + 0x2A)
 488
 489 /* RTAS ibm,get-system-parameter token values */
 490 #define RTAS_SYSPARM_SPLPAR_CHARACTERISTICS      20
 491 #define RTAS_SYSPARM_DIAGNOSTICS_RUN_MODE        42
 492 #define RTAS_SYSPARM_UUID                        48
 493
 494 /* RTAS indicator/sensor types
 495  *
 496  * as defined by PAPR+ 2.7 7.3.5.4, Table 41
 497  *
 498  * NOTE: currently only DR-related sensors are implemented here
 499  */
 500 #define RTAS_SENSOR_TYPE_ISOLATION_STATE        9001
 501 #define RTAS_SENSOR_TYPE_DR                     9002
 502 #define RTAS_SENSOR_TYPE_ALLOCATION_STATE       9003
 503 #define RTAS_SENSOR_TYPE_ENTITY_SENSE RTAS_SENSOR_TYPE_ALLOCATION_STATE
 504
 505 /* Possible values for the platform-processor-diagnostics-run-mode parameter
 506  * of the RTAS ibm,get-system-parameter call.
 507  */
 508 #define DIAGNOSTICS_RUN_MODE_DISABLED  0
 509 #define DIAGNOSTICS_RUN_MODE_STAGGERED 1
 510 #define DIAGNOSTICS_RUN_MODE_IMMEDIATE 2
 511 #define DIAGNOSTICS_RUN_MODE_PERIODIC  3
 512
 513 static inline uint64_t ppc64_phys_to_real(uint64_t addr)
 514 {
 515     return addr & ~0xF000000000000000ULL;
 516 }
 517
 518 static inline uint32_t rtas_ld(target_ulong phys, int n)
 519 {
 520     return ldl_be_phys(&address_space_memory, ppc64_phys_to_real(phys + 4*n));
 521 }
 522
 523 static inline uint64_t rtas_ldq(target_ulong phys, int n)
 524 {
 525     return (uint64_t)rtas_ld(phys, n) << 32 | rtas_ld(phys, n + 1);
 526 }
 527
 528 static inline void rtas_st(target_ulong phys, int n, uint32_t val)
 529 {
 530     stl_be_phys(&address_space_memory, ppc64_phys_to_real(phys + 4*n), val);
 531 }
 532
 533 typedef void (*spapr_rtas_fn)(PowerPCCPU *cpu, sPAPRMachineState *sm,
 534                               uint32_t token,
 535                               uint32_t nargs, target_ulong args,
 536                               uint32_t nret, target_ulong rets);
 537 void spapr_rtas_register(int token, const char *name, spapr_rtas_fn fn);
 538 target_ulong spapr_rtas_call(PowerPCCPU *cpu, sPAPRMachineState *sm,
 539                              uint32_t token, uint32_t nargs, target_ulong args,
 540                              uint32_t nret, target_ulong rets);
 541 void spapr_dt_rtas_tokens(void *fdt, int rtas);
 542 void spapr_load_rtas(sPAPRMachineState *spapr, void *fdt, hwaddr addr);
 543
 544 #define SPAPR_TCE_PAGE_SHIFT   12
 545 #define SPAPR_TCE_PAGE_SIZE    (1ULL << SPAPR_TCE_PAGE_SHIFT)
 546 #define SPAPR_TCE_PAGE_MASK    (SPAPR_TCE_PAGE_SIZE - 1)
 547
 548 #define SPAPR_VIO_BASE_LIOBN    0x00000000
 549 #define SPAPR_VIO_LIOBN(reg)    (0x00000000 | (reg))
 550 #define SPAPR_PCI_LIOBN(phb_index, window_num) \
 551     (0x80000000 | ((phb_index) << 8) | (window_num))
 552 #define SPAPR_IS_PCI_LIOBN(liobn)   (!!((liobn) & 0x80000000))
 553 #define SPAPR_PCI_DMA_WINDOW_NUM(liobn) ((liobn) & 0xff)
 554
 555 #define RTAS_ERROR_LOG_MAX      2048
 556
 557 #define RTAS_EVENT_SCAN_RATE    1
 558
 559 typedef struct sPAPRTCETable sPAPRTCETable;
 560
 561 #define TYPE_SPAPR_TCE_TABLE "spapr-tce-table"
 562 #define SPAPR_TCE_TABLE(obj) \
 563     OBJECT_CHECK(sPAPRTCETable, (obj), TYPE_SPAPR_TCE_TABLE)
 564
 565 struct sPAPRTCETable {
 566     DeviceState parent;
 567     uint32_t liobn;
 568     uint32_t nb_table;
 569     uint64_t bus_offset;
 570     uint32_t page_shift;
 571     uint64_t *table;
 572     uint32_t mig_nb_table;
 573     uint64_t *mig_table;
 574     bool bypass;
 575     bool need_vfio;
 576     int fd;
 577     MemoryRegion root, iommu;
 578     struct VIOsPAPRDevice *vdev; /* for @bypass migration compatibility only */
 579     QLIST_ENTRY(sPAPRTCETable) list;
 580 };
 581
 582 sPAPRTCETable *spapr_tce_find_by_liobn(target_ulong liobn);
 583
 584 struct sPAPREventLogEntry {
 585     int log_type;
 586     bool exception;
 587     void *data;
 588     QTAILQ_ENTRY(sPAPREventLogEntry) next;
 589 };
 590
 591 void spapr_events_init(sPAPRMachineState *sm);
 592 void spapr_dt_events(sPAPRMachineState *sm, void *fdt);
 593 int spapr_h_cas_compose_response(sPAPRMachineState *sm,
 594                                  target_ulong addr, target_ulong size,
 595                                  sPAPROptionVector *ov5_updates);
 596 sPAPRTCETable *spapr_tce_new_table(DeviceState *owner, uint32_t liobn);
 597 void spapr_tce_table_enable(sPAPRTCETable *tcet,
 598                             uint32_t page_shift, uint64_t bus_offset,
 599                             uint32_t nb_table);
 600 void spapr_tce_table_disable(sPAPRTCETable *tcet);
 601 void spapr_tce_set_need_vfio(sPAPRTCETable *tcet, bool need_vfio);
 602
 603 MemoryRegion *spapr_tce_get_iommu(sPAPRTCETable *tcet);
 604 int spapr_dma_dt(void *fdt, int node_off, const char *propname,
 605                  uint32_t liobn, uint64_t window, uint32_t size);
 606 int spapr_tcet_dma_dt(void *fdt, int node_off, const char *propname,
 607                       sPAPRTCETable *tcet);
 608 void spapr_pci_switch_vga(bool big_endian);
 609 void spapr_hotplug_req_add_by_index(sPAPRDRConnector *drc);
 610 void spapr_hotplug_req_remove_by_index(sPAPRDRConnector *drc);
 611 void spapr_hotplug_req_add_by_count(sPAPRDRConnectorType drc_type,
 612                                        uint32_t count);
 613 void spapr_hotplug_req_remove_by_count(sPAPRDRConnectorType drc_type,
 614                                           uint32_t count);
 615 void spapr_hotplug_req_add_by_count_indexed(sPAPRDRConnectorType drc_type,
 616                                             uint32_t count, uint32_t index);
 617 void spapr_hotplug_req_remove_by_count_indexed(sPAPRDRConnectorType drc_type,
 618                                                uint32_t count, uint32_t index);
 619 void *spapr_populate_hotplug_cpu_dt(CPUState *cs, int *fdt_offset,
 620                                     sPAPRMachineState *spapr);
 621
 622 /* rtas-configure-connector state */
 623 struct sPAPRConfigureConnectorState {
 624     uint32_t drc_index;
 625     int fdt_offset;
 626     int fdt_depth;
 627     QTAILQ_ENTRY(sPAPRConfigureConnectorState) next;
 628 };
 629
 630 void spapr_ccs_reset_hook(void *opaque);
 631
 632 #define TYPE_SPAPR_RTC "spapr-rtc"
 633 #define TYPE_SPAPR_RNG "spapr-rng"
 634
 635 void spapr_rtc_read(DeviceState *dev, struct tm *tm, uint32_t *ns);
 636 int spapr_rtc_import_offset(DeviceState *dev, int64_t legacy_offset);
 637
 638 int spapr_rng_populate_dt(void *fdt);
 639
 640 #define SPAPR_MEMORY_BLOCK_SIZE (1 << 28) /* 256MB */
 641
 642 /*
 643  * This defines the maximum number of DIMM slots we can have for sPAPR
 644  * guest. This is not defined by sPAPR but we are defining it to 32 slots
 645  * based on default number of slots provided by PowerPC kernel.
 646  */
 647 #define SPAPR_MAX_RAM_SLOTS     32
 648
 649 /* 1GB alignment for hotplug memory region */
 650 #define SPAPR_HOTPLUG_MEM_ALIGN (1ULL << 30)
 651
 652 /*
 653  * Number of 32 bit words in each LMB list entry in ibm,dynamic-memory
 654  * property under ibm,dynamic-reconfiguration-memory node.
 655  */
 656 #define SPAPR_DR_LMB_LIST_ENTRY_SIZE 6
 657
 658 /*
 659  * Defines for flag value in ibm,dynamic-memory property under
 660  * ibm,dynamic-reconfiguration-memory node.
 661  */
 662 #define SPAPR_LMB_FLAGS_ASSIGNED 0x00000008
 663 #define SPAPR_LMB_FLAGS_DRC_INVALID 0x00000020
 664 #define SPAPR_LMB_FLAGS_RESERVED 0x00000080
 665
 666 void spapr_do_system_reset_on_cpu(CPUState *cs, run_on_cpu_data arg);
 667
 668 #endif /* HW_SPAPR_H */