i2c: add aspeed i2c controller
[qemu.git] / tests / tcg / runcom.c
blobd60342bfc65a9c4f0e18b63286661afa512c9288
1 /*
2 * Simple example of use of vm86: launch a basic .com DOS executable
3 */
4 #include <stdlib.h>
5 #include <stdio.h>
6 #include <string.h>
7 #include <inttypes.h>
8 #include <unistd.h>
9 #include <fcntl.h>
10 #include <sys/mman.h>
11 #include <signal.h>
13 #include <linux/unistd.h>
14 #include <asm/vm86.h>
16 extern int vm86 (unsigned long int subfunction,
17 struct vm86plus_struct *info);
19 #define VIF_MASK 0x00080000
21 //#define SIGTEST
23 #define COM_BASE_ADDR 0x10100
25 static void usage(void)
27 printf("runcom version 0.1 (c) 2003 Fabrice Bellard\n"
28 "usage: runcom file.com\n"
29 "VM86 Run simple .com DOS executables (linux vm86 test mode)\n");
30 exit(1);
33 static inline void set_bit(uint8_t *a, unsigned int bit)
35 a[bit / 8] |= (1 << (bit % 8));
38 static inline uint8_t *seg_to_linear(unsigned int seg, unsigned int reg)
40 return (uint8_t *)((seg << 4) + (reg & 0xffff));
43 static inline void pushw(struct vm86_regs *r, int val)
45 r->esp = (r->esp & ~0xffff) | ((r->esp - 2) & 0xffff);
46 *(uint16_t *)seg_to_linear(r->ss, r->esp) = val;
49 void dump_regs(struct vm86_regs *r)
51 fprintf(stderr,
52 "EAX=%08lx EBX=%08lx ECX=%08lx EDX=%08lx\n"
53 "ESI=%08lx EDI=%08lx EBP=%08lx ESP=%08lx\n"
54 "EIP=%08lx EFL=%08lx\n"
55 "CS=%04x DS=%04x ES=%04x SS=%04x FS=%04x GS=%04x\n",
56 r->eax, r->ebx, r->ecx, r->edx, r->esi, r->edi, r->ebp, r->esp,
57 r->eip, r->eflags,
58 r->cs, r->ds, r->es, r->ss, r->fs, r->gs);
61 #ifdef SIGTEST
62 void alarm_handler(int sig)
64 fprintf(stderr, "alarm signal=%d\n", sig);
65 alarm(1);
67 #endif
69 int main(int argc, char **argv)
71 uint8_t *vm86_mem;
72 const char *filename;
73 int fd, ret, seg;
74 struct vm86plus_struct ctx;
75 struct vm86_regs *r;
77 if (argc != 2)
78 usage();
79 filename = argv[1];
81 vm86_mem = mmap((void *)0x00000000, 0x110000,
82 PROT_WRITE | PROT_READ | PROT_EXEC,
83 MAP_FIXED | MAP_ANON | MAP_PRIVATE, -1, 0);
84 if (vm86_mem == MAP_FAILED) {
85 perror("mmap");
86 exit(1);
88 #ifdef SIGTEST
90 struct sigaction act;
92 act.sa_handler = alarm_handler;
93 sigemptyset(&act.sa_mask);
94 act.sa_flags = 0;
95 sigaction(SIGALRM, &act, NULL);
96 alarm(1);
98 #endif
100 /* load the MSDOS .com executable */
101 fd = open(filename, O_RDONLY);
102 if (fd < 0) {
103 perror(filename);
104 exit(1);
106 ret = read(fd, vm86_mem + COM_BASE_ADDR, 65536 - 256);
107 if (ret < 0) {
108 perror("read");
109 exit(1);
111 close(fd);
113 memset(&ctx, 0, sizeof(ctx));
114 /* init basic registers */
115 r = &ctx.regs;
116 r->eip = 0x100;
117 r->esp = 0xfffe;
118 seg = (COM_BASE_ADDR - 0x100) >> 4;
119 r->cs = seg;
120 r->ss = seg;
121 r->ds = seg;
122 r->es = seg;
123 r->fs = seg;
124 r->gs = seg;
125 r->eflags = VIF_MASK;
127 /* put return code */
128 set_bit((uint8_t *)&ctx.int_revectored, 0x21);
129 *seg_to_linear(r->cs, 0) = 0xb4; /* mov ah, $0 */
130 *seg_to_linear(r->cs, 1) = 0x00;
131 *seg_to_linear(r->cs, 2) = 0xcd; /* int $0x21 */
132 *seg_to_linear(r->cs, 3) = 0x21;
133 pushw(&ctx.regs, 0x0000);
135 /* the value of these registers seem to be assumed by pi_10.com */
136 r->esi = 0x100;
137 r->ecx = 0xff;
138 r->ebp = 0x0900;
139 r->edi = 0xfffe;
141 for(;;) {
142 ret = vm86(VM86_ENTER, &ctx);
143 switch(VM86_TYPE(ret)) {
144 case VM86_INTx:
146 int int_num, ah;
148 int_num = VM86_ARG(ret);
149 if (int_num != 0x21)
150 goto unknown_int;
151 ah = (r->eax >> 8) & 0xff;
152 switch(ah) {
153 case 0x00: /* exit */
154 exit(0);
155 case 0x02: /* write char */
157 uint8_t c = r->edx;
158 write(1, &c, 1);
160 break;
161 case 0x09: /* write string */
163 uint8_t c;
164 for(;;) {
165 c = *seg_to_linear(r->ds, r->edx);
166 if (c == '$')
167 break;
168 write(1, &c, 1);
170 r->eax = (r->eax & ~0xff) | '$';
172 break;
173 default:
174 unknown_int:
175 fprintf(stderr, "unsupported int 0x%02x\n", int_num);
176 dump_regs(&ctx.regs);
177 // exit(1);
180 break;
181 case VM86_SIGNAL:
182 /* a signal came, we just ignore that */
183 break;
184 case VM86_STI:
185 break;
186 default:
187 fprintf(stderr, "unhandled vm86 return code (0x%x)\n", ret);
188 dump_regs(&ctx.regs);
189 exit(1);