| blob | b2cf7a6759ae68631981c620cc0be3379d77d764 |
1 # -*- Mode: Python -*-
2 # vim: filetype=python
3 #
5 ##
6 # = Remote desktop
7 ##
9 { 'include': 'common.json' }
10 { 'include': 'sockets.json' }
12 ##
13 # @set_password:
14 #
15 # Sets the password of a remote display session.
16 #
17 # @protocol: - 'vnc' to modify the VNC server password
18 # - 'spice' to modify the Spice server password
19 #
20 # @password: the new password
21 #
22 # @connected: how to handle existing clients when changing the
23 # password. If nothing is specified, defaults to 'keep'
24 # 'fail' to fail the command if clients are connected
25 # 'disconnect' to disconnect existing clients
26 # 'keep' to maintain existing clients
27 #
28 # Returns: - Nothing on success
29 # - If Spice is not enabled, DeviceNotFound
30 #
31 # Since: 0.14
32 #
33 # Example:
34 #
35 # -> { "execute": "set_password", "arguments": { "protocol": "vnc",
36 # "password": "secret" } }
37 # <- { "return": {} }
38 #
39 ##
40 { 'command': 'set_password',
41 'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} }
43 ##
44 # @expire_password:
45 #
46 # Expire the password of a remote display server.
47 #
48 # @protocol: the name of the remote display protocol 'vnc' or 'spice'
49 #
50 # @time: when to expire the password.
51 #
52 # - 'now' to expire the password immediately
53 # - 'never' to cancel password expiration
54 # - '+INT' where INT is the number of seconds from now (integer)
55 # - 'INT' where INT is the absolute time in seconds
56 #
57 # Returns: - Nothing on success
58 # - If @protocol is 'spice' and Spice is not active, DeviceNotFound
59 #
60 # Since: 0.14
61 #
62 # Notes: Time is relative to the server and currently there is no way to
63 # coordinate server time with client time. It is not recommended to
64 # use the absolute time version of the @time parameter unless you're
65 # sure you are on the same machine as the QEMU instance.
66 #
67 # Example:
68 #
69 # -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
70 # "time": "+60" } }
71 # <- { "return": {} }
72 #
73 ##
74 { 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} }
76 ##
77 # @screendump:
78 #
79 # Write a PPM of the VGA screen to a file.
80 #
81 # @filename: the path of a new PPM file to store the image
82 #
83 # @device: ID of the display device that should be dumped. If this parameter
84 # is missing, the primary display will be used. (Since 2.12)
85 #
86 # @head: head to use in case the device supports multiple heads. If this
87 # parameter is missing, head #0 will be used. Also note that the head
88 # can only be specified in conjunction with the device ID. (Since 2.12)
89 #
90 # Returns: Nothing on success
91 #
92 # Since: 0.14
93 #
94 # Example:
95 #
96 # -> { "execute": "screendump",
97 # "arguments": { "filename": "/tmp/image" } }
98 # <- { "return": {} }
99 #
100 ##
101 { 'command': 'screendump',
102 'data': {'filename': 'str', '*device': 'str', '*head': 'int'},
103 'coroutine': true }
105 ##
106 # == Spice
107 ##
109 ##
110 # @SpiceBasicInfo:
111 #
112 # The basic information for SPICE network connection
113 #
114 # @host: IP address
115 #
116 # @port: port number
117 #
118 # @family: address family
119 #
120 # Since: 2.1
121 ##
122 { 'struct': 'SpiceBasicInfo',
123 'data': { 'host': 'str',
124 'port': 'str',
125 'family': 'NetworkAddressFamily' },
126 'if': 'CONFIG_SPICE' }
128 ##
129 # @SpiceServerInfo:
130 #
131 # Information about a SPICE server
132 #
133 # @auth: authentication method
134 #
135 # Since: 2.1
136 ##
137 { 'struct': 'SpiceServerInfo',
138 'base': 'SpiceBasicInfo',
139 'data': { '*auth': 'str' },
140 'if': 'CONFIG_SPICE' }
142 ##
143 # @SpiceChannel:
144 #
145 # Information about a SPICE client channel.
146 #
147 # @connection-id: SPICE connection id number. All channels with the same id
148 # belong to the same SPICE session.
149 #
150 # @channel-type: SPICE channel type number. "1" is the main control
151 # channel, filter for this one if you want to track spice
152 # sessions only
153 #
154 # @channel-id: SPICE channel ID number. Usually "0", might be different when
155 # multiple channels of the same type exist, such as multiple
156 # display channels in a multihead setup
157 #
158 # @tls: true if the channel is encrypted, false otherwise.
159 #
160 # Since: 0.14
161 ##
162 { 'struct': 'SpiceChannel',
163 'base': 'SpiceBasicInfo',
164 'data': {'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int',
165 'tls': 'bool'},
166 'if': 'CONFIG_SPICE' }
168 ##
169 # @SpiceQueryMouseMode:
170 #
171 # An enumeration of Spice mouse states.
172 #
173 # @client: Mouse cursor position is determined by the client.
174 #
175 # @server: Mouse cursor position is determined by the server.
176 #
177 # @unknown: No information is available about mouse mode used by
178 # the spice server.
179 #
180 # Note: spice/enums.h has a SpiceMouseMode already, hence the name.
181 #
182 # Since: 1.1
183 ##
184 { 'enum': 'SpiceQueryMouseMode',
185 'data': [ 'client', 'server', 'unknown' ],
186 'if': 'CONFIG_SPICE' }
188 ##
189 # @SpiceInfo:
190 #
191 # Information about the SPICE session.
192 #
193 # @enabled: true if the SPICE server is enabled, false otherwise
194 #
195 # @migrated: true if the last guest migration completed and spice
196 # migration had completed as well. false otherwise. (since 1.4)
197 #
198 # @host: The hostname the SPICE server is bound to. This depends on
199 # the name resolution on the host and may be an IP address.
200 #
201 # @port: The SPICE server's port number.
202 #
203 # @compiled-version: SPICE server version.
204 #
205 # @tls-port: The SPICE server's TLS port number.
206 #
207 # @auth: the current authentication type used by the server
208 #
209 # - 'none' if no authentication is being used
210 # - 'spice' uses SASL or direct TLS authentication, depending on command
211 # line options
212 #
213 # @mouse-mode: The mode in which the mouse cursor is displayed currently. Can
214 # be determined by the client or the server, or unknown if spice
215 # server doesn't provide this information. (since: 1.1)
216 #
217 # @channels: a list of @SpiceChannel for each active spice channel
218 #
219 # Since: 0.14
220 ##
221 { 'struct': 'SpiceInfo',
222 'data': {'enabled': 'bool', 'migrated': 'bool', '*host': 'str', '*port': 'int',
223 '*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str',
224 'mouse-mode': 'SpiceQueryMouseMode', '*channels': ['SpiceChannel']},
225 'if': 'CONFIG_SPICE' }
227 ##
228 # @query-spice:
229 #
230 # Returns information about the current SPICE server
231 #
232 # Returns: @SpiceInfo
233 #
234 # Since: 0.14
235 #
236 # Example:
237 #
238 # -> { "execute": "query-spice" }
239 # <- { "return": {
240 # "enabled": true,
241 # "auth": "spice",
242 # "port": 5920,
243 # "tls-port": 5921,
244 # "host": "0.0.0.0",
245 # "channels": [
246 # {
247 # "port": "54924",
248 # "family": "ipv4",
249 # "channel-type": 1,
250 # "connection-id": 1804289383,
251 # "host": "127.0.0.1",
252 # "channel-id": 0,
253 # "tls": true
254 # },
255 # {
256 # "port": "36710",
257 # "family": "ipv4",
258 # "channel-type": 4,
259 # "connection-id": 1804289383,
260 # "host": "127.0.0.1",
261 # "channel-id": 0,
262 # "tls": false
263 # },
264 # [ ... more channels follow ... ]
265 # ]
266 # }
267 # }
268 #
269 ##
270 { 'command': 'query-spice', 'returns': 'SpiceInfo',
271 'if': 'CONFIG_SPICE' }
273 ##
274 # @SPICE_CONNECTED:
275 #
276 # Emitted when a SPICE client establishes a connection
277 #
278 # @server: server information
279 #
280 # @client: client information
281 #
282 # Since: 0.14
283 #
284 # Example:
285 #
286 # <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707},
287 # "event": "SPICE_CONNECTED",
288 # "data": {
289 # "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
290 # "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
291 # }}
292 #
293 ##
294 { 'event': 'SPICE_CONNECTED',
295 'data': { 'server': 'SpiceBasicInfo',
296 'client': 'SpiceBasicInfo' },
297 'if': 'CONFIG_SPICE' }
299 ##
300 # @SPICE_INITIALIZED:
301 #
302 # Emitted after initial handshake and authentication takes place (if any)
303 # and the SPICE channel is up and running
304 #
305 # @server: server information
306 #
307 # @client: client information
308 #
309 # Since: 0.14
310 #
311 # Example:
312 #
313 # <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172},
314 # "event": "SPICE_INITIALIZED",
315 # "data": {"server": {"auth": "spice", "port": "5921",
316 # "family": "ipv4", "host": "127.0.0.1"},
317 # "client": {"port": "49004", "family": "ipv4", "channel-type": 3,
318 # "connection-id": 1804289383, "host": "127.0.0.1",
319 # "channel-id": 0, "tls": true}
320 # }}
321 #
322 ##
323 { 'event': 'SPICE_INITIALIZED',
324 'data': { 'server': 'SpiceServerInfo',
325 'client': 'SpiceChannel' },
326 'if': 'CONFIG_SPICE' }
328 ##
329 # @SPICE_DISCONNECTED:
330 #
331 # Emitted when the SPICE connection is closed
332 #
333 # @server: server information
334 #
335 # @client: client information
336 #
337 # Since: 0.14
338 #
339 # Example:
340 #
341 # <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707},
342 # "event": "SPICE_DISCONNECTED",
343 # "data": {
344 # "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
345 # "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
346 # }}
347 #
348 ##
349 { 'event': 'SPICE_DISCONNECTED',
350 'data': { 'server': 'SpiceBasicInfo',
351 'client': 'SpiceBasicInfo' },
352 'if': 'CONFIG_SPICE' }
354 ##
355 # @SPICE_MIGRATE_COMPLETED:
356 #
357 # Emitted when SPICE migration has completed
358 #
359 # Since: 1.3
360 #
361 # Example:
362 #
363 # <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172},
364 # "event": "SPICE_MIGRATE_COMPLETED" }
365 #
366 ##
367 { 'event': 'SPICE_MIGRATE_COMPLETED',
368 'if': 'CONFIG_SPICE' }
370 ##
371 # == VNC
372 ##
374 ##
375 # @VncBasicInfo:
376 #
377 # The basic information for vnc network connection
378 #
379 # @host: IP address
380 #
381 # @service: The service name of the vnc port. This may depend on the host
382 # system's service database so symbolic names should not be relied
383 # on.
384 #
385 # @family: address family
386 #
387 # @websocket: true in case the socket is a websocket (since 2.3).
388 #
389 # Since: 2.1
390 ##
391 { 'struct': 'VncBasicInfo',
392 'data': { 'host': 'str',
393 'service': 'str',
394 'family': 'NetworkAddressFamily',
395 'websocket': 'bool' },
396 'if': 'CONFIG_VNC' }
398 ##
399 # @VncServerInfo:
400 #
401 # The network connection information for server
402 #
403 # @auth: authentication method used for
404 # the plain (non-websocket) VNC server
405 #
406 # Since: 2.1
407 ##
408 { 'struct': 'VncServerInfo',
409 'base': 'VncBasicInfo',
410 'data': { '*auth': 'str' },
411 'if': 'CONFIG_VNC' }
413 ##
414 # @VncClientInfo:
415 #
416 # Information about a connected VNC client.
417 #
418 # @x509_dname: If x509 authentication is in use, the Distinguished
419 # Name of the client.
420 #
421 # @sasl_username: If SASL authentication is in use, the SASL username
422 # used for authentication.
423 #
424 # Since: 0.14
425 ##
426 { 'struct': 'VncClientInfo',
427 'base': 'VncBasicInfo',
428 'data': { '*x509_dname': 'str', '*sasl_username': 'str' },
429 'if': 'CONFIG_VNC' }
431 ##
432 # @VncInfo:
433 #
434 # Information about the VNC session.
435 #
436 # @enabled: true if the VNC server is enabled, false otherwise
437 #
438 # @host: The hostname the VNC server is bound to. This depends on
439 # the name resolution on the host and may be an IP address.
440 #
441 # @family: - 'ipv6' if the host is listening for IPv6 connections
442 # - 'ipv4' if the host is listening for IPv4 connections
443 # - 'unix' if the host is listening on a unix domain socket
444 # - 'unknown' otherwise
445 #
446 # @service: The service name of the server's port. This may depends
447 # on the host system's service database so symbolic names should not
448 # be relied on.
449 #
450 # @auth: the current authentication type used by the server
451 #
452 # - 'none' if no authentication is being used
453 # - 'vnc' if VNC authentication is being used
454 # - 'vencrypt+plain' if VEncrypt is used with plain text authentication
455 # - 'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication
456 # - 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication
457 # - 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth
458 # - 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth
459 # - 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth
460 # - 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth
461 # - 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth
462 # - 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth
463 #
464 # @clients: a list of @VncClientInfo of all currently connected clients
465 #
466 # Since: 0.14
467 ##
468 { 'struct': 'VncInfo',
469 'data': {'enabled': 'bool', '*host': 'str',
470 '*family': 'NetworkAddressFamily',
471 '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']},
472 'if': 'CONFIG_VNC' }
474 ##
475 # @VncPrimaryAuth:
476 #
477 # vnc primary authentication method.
478 #
479 # Since: 2.3
480 ##
481 { 'enum': 'VncPrimaryAuth',
482 'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra',
483 'tls', 'vencrypt', 'sasl' ],
484 'if': 'CONFIG_VNC' }
486 ##
487 # @VncVencryptSubAuth:
488 #
489 # vnc sub authentication method with vencrypt.
490 #
491 # Since: 2.3
492 ##
493 { 'enum': 'VncVencryptSubAuth',
494 'data': [ 'plain',
495 'tls-none', 'x509-none',
496 'tls-vnc', 'x509-vnc',
497 'tls-plain', 'x509-plain',
498 'tls-sasl', 'x509-sasl' ],
499 'if': 'CONFIG_VNC' }
501 ##
502 # @VncServerInfo2:
503 #
504 # The network connection information for server
505 #
506 # @auth: The current authentication type used by the servers
507 #
508 # @vencrypt: The vencrypt sub authentication type used by the
509 # servers, only specified in case auth == vencrypt.
510 #
511 # Since: 2.9
512 ##
513 { 'struct': 'VncServerInfo2',
514 'base': 'VncBasicInfo',
515 'data': { 'auth' : 'VncPrimaryAuth',
516 '*vencrypt' : 'VncVencryptSubAuth' },
517 'if': 'CONFIG_VNC' }
519 ##
520 # @VncInfo2:
521 #
522 # Information about a vnc server
523 #
524 # @id: vnc server name.
525 #
526 # @server: A list of @VncBasincInfo describing all listening sockets.
527 # The list can be empty (in case the vnc server is disabled).
528 # It also may have multiple entries: normal + websocket,
529 # possibly also ipv4 + ipv6 in the future.
530 #
531 # @clients: A list of @VncClientInfo of all currently connected clients.
532 # The list can be empty, for obvious reasons.
533 #
534 # @auth: The current authentication type used by the non-websockets servers
535 #
536 # @vencrypt: The vencrypt authentication type used by the servers,
537 # only specified in case auth == vencrypt.
538 #
539 # @display: The display device the vnc server is linked to.
540 #
541 # Since: 2.3
542 ##
543 { 'struct': 'VncInfo2',
544 'data': { 'id' : 'str',
545 'server' : ['VncServerInfo2'],
546 'clients' : ['VncClientInfo'],
547 'auth' : 'VncPrimaryAuth',
548 '*vencrypt' : 'VncVencryptSubAuth',
549 '*display' : 'str' },
550 'if': 'CONFIG_VNC' }
552 ##
553 # @query-vnc:
554 #
555 # Returns information about the current VNC server
556 #
557 # Returns: @VncInfo
558 #
559 # Since: 0.14
560 #
561 # Example:
562 #
563 # -> { "execute": "query-vnc" }
564 # <- { "return": {
565 # "enabled":true,
566 # "host":"0.0.0.0",
567 # "service":"50402",
568 # "auth":"vnc",
569 # "family":"ipv4",
570 # "clients":[
571 # {
572 # "host":"127.0.0.1",
573 # "service":"50401",
574 # "family":"ipv4"
575 # }
576 # ]
577 # }
578 # }
579 #
580 ##
581 { 'command': 'query-vnc', 'returns': 'VncInfo',
582 'if': 'CONFIG_VNC' }
583 ##
584 # @query-vnc-servers:
585 #
586 # Returns a list of vnc servers. The list can be empty.
587 #
588 # Returns: a list of @VncInfo2
589 #
590 # Since: 2.3
591 ##
592 { 'command': 'query-vnc-servers', 'returns': ['VncInfo2'],
593 'if': 'CONFIG_VNC' }
595 ##
596 # @change-vnc-password:
597 #
598 # Change the VNC server password.
599 #
600 # @password: the new password to use with VNC authentication
601 #
602 # Since: 1.1
603 #
604 # Notes: An empty password in this command will set the password to the empty
605 # string. Existing clients are unaffected by executing this command.
606 ##
607 { 'command': 'change-vnc-password',
608 'data': { 'password': 'str' },
609 'if': 'CONFIG_VNC' }
611 ##
612 # @VNC_CONNECTED:
613 #
614 # Emitted when a VNC client establishes a connection
615 #
616 # @server: server information
617 #
618 # @client: client information
619 #
620 # Note: This event is emitted before any authentication takes place, thus
621 # the authentication ID is not provided
622 #
623 # Since: 0.13
624 #
625 # Example:
626 #
627 # <- { "event": "VNC_CONNECTED",
628 # "data": {
629 # "server": { "auth": "sasl", "family": "ipv4",
630 # "service": "5901", "host": "0.0.0.0" },
631 # "client": { "family": "ipv4", "service": "58425",
632 # "host": "127.0.0.1" } },
633 # "timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
634 #
635 ##
636 { 'event': 'VNC_CONNECTED',
637 'data': { 'server': 'VncServerInfo',
638 'client': 'VncBasicInfo' },
639 'if': 'CONFIG_VNC' }
641 ##
642 # @VNC_INITIALIZED:
643 #
644 # Emitted after authentication takes place (if any) and the VNC session is
645 # made active
646 #
647 # @server: server information
648 #
649 # @client: client information
650 #
651 # Since: 0.13
652 #
653 # Example:
654 #
655 # <- { "event": "VNC_INITIALIZED",
656 # "data": {
657 # "server": { "auth": "sasl", "family": "ipv4",
658 # "service": "5901", "host": "0.0.0.0"},
659 # "client": { "family": "ipv4", "service": "46089",
660 # "host": "127.0.0.1", "sasl_username": "luiz" } },
661 # "timestamp": { "seconds": 1263475302, "microseconds": 150772 } }
662 #
663 ##
664 { 'event': 'VNC_INITIALIZED',
665 'data': { 'server': 'VncServerInfo',
666 'client': 'VncClientInfo' },
667 'if': 'CONFIG_VNC' }
669 ##
670 # @VNC_DISCONNECTED:
671 #
672 # Emitted when the connection is closed
673 #
674 # @server: server information
675 #
676 # @client: client information
677 #
678 # Since: 0.13
679 #
680 # Example:
681 #
682 # <- { "event": "VNC_DISCONNECTED",
683 # "data": {
684 # "server": { "auth": "sasl", "family": "ipv4",
685 # "service": "5901", "host": "0.0.0.0" },
686 # "client": { "family": "ipv4", "service": "58425",
687 # "host": "127.0.0.1", "sasl_username": "luiz" } },
688 # "timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
689 #
690 ##
691 { 'event': 'VNC_DISCONNECTED',
692 'data': { 'server': 'VncServerInfo',
693 'client': 'VncClientInfo' },
694 'if': 'CONFIG_VNC' }
696 ##
697 # = Input
698 ##
700 ##
701 # @MouseInfo:
702 #
703 # Information about a mouse device.
704 #
705 # @name: the name of the mouse device
706 #
707 # @index: the index of the mouse device
708 #
709 # @current: true if this device is currently receiving mouse events
710 #
711 # @absolute: true if this device supports absolute coordinates as input
712 #
713 # Since: 0.14
714 ##
715 { 'struct': 'MouseInfo',
716 'data': {'name': 'str', 'index': 'int', 'current': 'bool',
717 'absolute': 'bool'} }
719 ##
720 # @query-mice:
721 #
722 # Returns information about each active mouse device
723 #
724 # Returns: a list of @MouseInfo for each device
725 #
726 # Since: 0.14
727 #
728 # Example:
729 #
730 # -> { "execute": "query-mice" }
731 # <- { "return": [
732 # {
733 # "name":"QEMU Microsoft Mouse",
734 # "index":0,
735 # "current":false,
736 # "absolute":false
737 # },
738 # {
739 # "name":"QEMU PS/2 Mouse",
740 # "index":1,
741 # "current":true,
742 # "absolute":true
743 # }
744 # ]
745 # }
746 #
747 ##
748 { 'command': 'query-mice', 'returns': ['MouseInfo'] }
750 ##
751 # @QKeyCode:
752 #
753 # An enumeration of key name.
754 #
755 # This is used by the @send-key command.
756 #
757 # @unmapped: since 2.0
758 # @pause: since 2.0
759 # @ro: since 2.4
760 # @kp_comma: since 2.4
761 # @kp_equals: since 2.6
762 # @power: since 2.6
763 # @hiragana: since 2.9
764 # @henkan: since 2.9
765 # @yen: since 2.9
766 #
767 # @sleep: since 2.10
768 # @wake: since 2.10
769 # @audionext: since 2.10
770 # @audioprev: since 2.10
771 # @audiostop: since 2.10
772 # @audioplay: since 2.10
773 # @audiomute: since 2.10
774 # @volumeup: since 2.10
775 # @volumedown: since 2.10
776 # @mediaselect: since 2.10
777 # @mail: since 2.10
778 # @calculator: since 2.10
779 # @computer: since 2.10
780 # @ac_home: since 2.10
781 # @ac_back: since 2.10
782 # @ac_forward: since 2.10
783 # @ac_refresh: since 2.10
784 # @ac_bookmarks: since 2.10
785 #
786 # @muhenkan: since 2.12
787 # @katakanahiragana: since 2.12
788 #
789 # @lang1: since 6.1
790 # @lang2: since 6.1
791 #
792 # 'sysrq' was mistakenly added to hack around the fact that
793 # the ps2 driver was not generating correct scancodes sequences
794 # when 'alt+print' was pressed. This flaw is now fixed and the
795 # 'sysrq' key serves no further purpose. Any further use of
796 # 'sysrq' will be transparently changed to 'print', so they
797 # are effectively synonyms.
798 #
799 # Since: 1.3
800 #
801 ##
802 { 'enum': 'QKeyCode',
803 'data': [ 'unmapped',
804 'shift', 'shift_r', 'alt', 'alt_r', 'ctrl',
805 'ctrl_r', 'menu', 'esc', '1', '2', '3', '4', '5', '6', '7', '8',
806 '9', '0', 'minus', 'equal', 'backspace', 'tab', 'q', 'w', 'e',
807 'r', 't', 'y', 'u', 'i', 'o', 'p', 'bracket_left', 'bracket_right',
808 'ret', 'a', 's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', 'semicolon',
809 'apostrophe', 'grave_accent', 'backslash', 'z', 'x', 'c', 'v', 'b',
810 'n', 'm', 'comma', 'dot', 'slash', 'asterisk', 'spc', 'caps_lock',
811 'f1', 'f2', 'f3', 'f4', 'f5', 'f6', 'f7', 'f8', 'f9', 'f10',
812 'num_lock', 'scroll_lock', 'kp_divide', 'kp_multiply',
813 'kp_subtract', 'kp_add', 'kp_enter', 'kp_decimal', 'sysrq', 'kp_0',
814 'kp_1', 'kp_2', 'kp_3', 'kp_4', 'kp_5', 'kp_6', 'kp_7', 'kp_8',
815 'kp_9', 'less', 'f11', 'f12', 'print', 'home', 'pgup', 'pgdn', 'end',
816 'left', 'up', 'down', 'right', 'insert', 'delete', 'stop', 'again',
817 'props', 'undo', 'front', 'copy', 'open', 'paste', 'find', 'cut',
818 'lf', 'help', 'meta_l', 'meta_r', 'compose', 'pause',
819 'ro', 'hiragana', 'henkan', 'yen', 'muhenkan', 'katakanahiragana',
820 'kp_comma', 'kp_equals', 'power', 'sleep', 'wake',
821 'audionext', 'audioprev', 'audiostop', 'audioplay', 'audiomute',
822 'volumeup', 'volumedown', 'mediaselect',
823 'mail', 'calculator', 'computer',
824 'ac_home', 'ac_back', 'ac_forward', 'ac_refresh', 'ac_bookmarks',
825 'lang1', 'lang2' ] }
827 ##
828 # @KeyValue:
829 #
830 # Represents a keyboard key.
831 #
832 # Since: 1.3
833 ##
834 { 'union': 'KeyValue',
835 'data': {
836 'number': 'int',
837 'qcode': 'QKeyCode' } }
839 ##
840 # @send-key:
841 #
842 # Send keys to guest.
843 #
844 # @keys: An array of @KeyValue elements. All @KeyValues in this array are
845 # simultaneously sent to the guest. A @KeyValue.number value is sent
846 # directly to the guest, while @KeyValue.qcode must be a valid
847 # @QKeyCode value
848 #
849 # @hold-time: time to delay key up events, milliseconds. Defaults
850 # to 100
851 #
852 # Returns: - Nothing on success
853 # - If key is unknown or redundant, InvalidParameter
854 #
855 # Since: 1.3
856 #
857 # Example:
858 #
859 # -> { "execute": "send-key",
860 # "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" },
861 # { "type": "qcode", "data": "alt" },
862 # { "type": "qcode", "data": "delete" } ] } }
863 # <- { "return": {} }
864 #
865 ##
866 { 'command': 'send-key',
867 'data': { 'keys': ['KeyValue'], '*hold-time': 'int' } }
869 ##
870 # @InputButton:
871 #
872 # Button of a pointer input device (mouse, tablet).
873 #
874 # @side: front side button of a 5-button mouse (since 2.9)
875 #
876 # @extra: rear side button of a 5-button mouse (since 2.9)
877 #
878 # Since: 2.0
879 ##
880 { 'enum' : 'InputButton',
881 'data' : [ 'left', 'middle', 'right', 'wheel-up', 'wheel-down', 'side',
882 'extra' ] }
884 ##
885 # @InputAxis:
886 #
887 # Position axis of a pointer input device (mouse, tablet).
888 #
889 # Since: 2.0
890 ##
891 { 'enum' : 'InputAxis',
892 'data' : [ 'x', 'y' ] }
894 ##
895 # @InputKeyEvent:
896 #
897 # Keyboard input event.
898 #
899 # @key: Which key this event is for.
900 # @down: True for key-down and false for key-up events.
901 #
902 # Since: 2.0
903 ##
904 { 'struct' : 'InputKeyEvent',
905 'data' : { 'key' : 'KeyValue',
906 'down' : 'bool' } }
908 ##
909 # @InputBtnEvent:
910 #
911 # Pointer button input event.
912 #
913 # @button: Which button this event is for.
914 # @down: True for key-down and false for key-up events.
915 #
916 # Since: 2.0
917 ##
918 { 'struct' : 'InputBtnEvent',
919 'data' : { 'button' : 'InputButton',
920 'down' : 'bool' } }
922 ##
923 # @InputMoveEvent:
924 #
925 # Pointer motion input event.
926 #
927 # @axis: Which axis is referenced by @value.
928 # @value: Pointer position. For absolute coordinates the
929 # valid range is 0 -> 0x7ffff
930 #
931 # Since: 2.0
932 ##
933 { 'struct' : 'InputMoveEvent',
934 'data' : { 'axis' : 'InputAxis',
935 'value' : 'int' } }
937 ##
938 # @InputEvent:
939 #
940 # Input event union.
941 #
942 # @type: the input type, one of:
943 #
944 # - 'key': Input event of Keyboard
945 # - 'btn': Input event of pointer buttons
946 # - 'rel': Input event of relative pointer motion
947 # - 'abs': Input event of absolute pointer motion
948 #
949 # Since: 2.0
950 ##
951 { 'union' : 'InputEvent',
952 'data' : { 'key' : 'InputKeyEvent',
953 'btn' : 'InputBtnEvent',
954 'rel' : 'InputMoveEvent',
955 'abs' : 'InputMoveEvent' } }
957 ##
958 # @input-send-event:
959 #
960 # Send input event(s) to guest.
961 #
962 # The @device and @head parameters can be used to send the input event
963 # to specific input devices in case (a) multiple input devices of the
964 # same kind are added to the virtual machine and (b) you have
965 # configured input routing (see docs/multiseat.txt) for those input
966 # devices. The parameters work exactly like the device and head
967 # properties of input devices. If @device is missing, only devices
968 # that have no input routing config are admissible. If @device is
969 # specified, both input devices with and without input routing config
970 # are admissible, but devices with input routing config take
971 # precedence.
972 #
973 # @device: display device to send event(s) to.
974 # @head: head to send event(s) to, in case the
975 # display device supports multiple scanouts.
976 # @events: List of InputEvent union.
977 #
978 # Returns: Nothing on success.
979 #
980 # Since: 2.6
981 #
982 # Note: The consoles are visible in the qom tree, under
983 # /backend/console[$index]. They have a device link and head property,
984 # so it is possible to map which console belongs to which device and
985 # display.
986 #
987 # Example:
988 #
989 # 1. Press left mouse button.
990 #
991 # -> { "execute": "input-send-event",
992 # "arguments": { "device": "video0",
993 # "events": [ { "type": "btn",
994 # "data" : { "down": true, "button": "left" } } ] } }
995 # <- { "return": {} }
996 #
997 # -> { "execute": "input-send-event",
998 # "arguments": { "device": "video0",
999 # "events": [ { "type": "btn",
1000 # "data" : { "down": false, "button": "left" } } ] } }
1001 # <- { "return": {} }
1002 #
1003 # 2. Press ctrl-alt-del.
1004 #
1005 # -> { "execute": "input-send-event",
1006 # "arguments": { "events": [
1007 # { "type": "key", "data" : { "down": true,
1008 # "key": {"type": "qcode", "data": "ctrl" } } },
1009 # { "type": "key", "data" : { "down": true,
1010 # "key": {"type": "qcode", "data": "alt" } } },
1011 # { "type": "key", "data" : { "down": true,
1012 # "key": {"type": "qcode", "data": "delete" } } } ] } }
1013 # <- { "return": {} }
1014 #
1015 # 3. Move mouse pointer to absolute coordinates (20000, 400).
1016 #
1017 # -> { "execute": "input-send-event" ,
1018 # "arguments": { "events": [
1019 # { "type": "abs", "data" : { "axis": "x", "value" : 20000 } },
1020 # { "type": "abs", "data" : { "axis": "y", "value" : 400 } } ] } }
1021 # <- { "return": {} }
1022 #
1023 ##
1024 { 'command': 'input-send-event',
1025 'data': { '*device': 'str',
1026 '*head' : 'int',
1027 'events' : [ 'InputEvent' ] } }
1029 ##
1030 # @DisplayGTK:
1031 #
1032 # GTK display options.
1033 #
1034 # @grab-on-hover: Grab keyboard input on mouse hover.
1035 # @zoom-to-fit: Zoom guest display to fit into the host window. When
1036 # turned off the host window will be resized instead.
1037 # In case the display device can notify the guest on
1038 # window resizes (virtio-gpu) this will default to "on",
1039 # assuming the guest will resize the display to match
1040 # the window size then. Otherwise it defaults to "off".
1041 # Since 3.1
1042 #
1043 # Since: 2.12
1044 #
1045 ##
1046 { 'struct' : 'DisplayGTK',
1047 'data' : { '*grab-on-hover' : 'bool',
1048 '*zoom-to-fit' : 'bool' } }
1050 ##
1051 # @DisplayEGLHeadless:
1052 #
1053 # EGL headless display options.
1054 #
1055 # @rendernode: Which DRM render node should be used. Default is the first
1056 # available node on the host.
1057 #
1058 # Since: 3.1
1059 #
1060 ##
1061 { 'struct' : 'DisplayEGLHeadless',
1062 'data' : { '*rendernode' : 'str' } }
1064 ##
1065 # @DisplayGLMode:
1066 #
1067 # Display OpenGL mode.
1068 #
1069 # @off: Disable OpenGL (default).
1070 # @on: Use OpenGL, pick context type automatically.
1071 # Would better be named 'auto' but is called 'on' for backward
1072 # compatibility with bool type.
1073 # @core: Use OpenGL with Core (desktop) Context.
1074 # @es: Use OpenGL with ES (embedded systems) Context.
1075 #
1076 # Since: 3.0
1077 #
1078 ##
1079 { 'enum' : 'DisplayGLMode',
1080 'data' : [ 'off', 'on', 'core', 'es' ] }
1082 ##
1083 # @DisplayCurses:
1084 #
1085 # Curses display options.
1086 #
1087 # @charset: Font charset used by guest (default: CP437).
1088 #
1089 # Since: 4.0
1090 #
1091 ##
1092 { 'struct' : 'DisplayCurses',
1093 'data' : { '*charset' : 'str' } }
1095 ##
1096 # @DisplayType:
1097 #
1098 # Display (user interface) type.
1099 #
1100 # @default: The default user interface, selecting from the first available
1101 # of gtk, sdl, cocoa, and vnc.
1102 #
1103 # @none: No user interface or video output display. The guest will
1104 # still see an emulated graphics card, but its output will not
1105 # be displayed to the QEMU user.
1106 #
1107 # @gtk: The GTK user interface.
1108 #
1109 # @sdl: The SDL user interface.
1110 #
1111 # @egl-headless: No user interface, offload GL operations to a local
1112 # DRI device. Graphical display need to be paired with
1113 # VNC or Spice. (Since 3.1)
1114 #
1115 # @curses: Display video output via curses. For graphics device
1116 # models which support a text mode, QEMU can display this
1117 # output using a curses/ncurses interface. Nothing is
1118 # displayed when the graphics device is in graphical mode or
1119 # if the graphics device does not support a text
1120 # mode. Generally only the VGA device models support text
1121 # mode.
1122 #
1123 # @cocoa: The Cocoa user interface.
1124 #
1125 # @spice-app: Set up a Spice server and run the default associated
1126 # application to connect to it. The server will redirect
1127 # the serial console and QEMU monitors. (Since 4.0)
1128 #
1129 # Since: 2.12
1130 #
1131 ##
1132 { 'enum' : 'DisplayType',
1133 'data' : [
1134 { 'name': 'default' },
1135 { 'name': 'none' },
1136 { 'name': 'gtk', 'if': 'CONFIG_GTK' },
1137 { 'name': 'sdl', 'if': 'CONFIG_SDL' },
1138 { 'name': 'egl-headless',
1139 'if': { 'all': ['CONFIG_OPENGL', 'CONFIG_GBM'] } },
1140 { 'name': 'curses', 'if': 'CONFIG_CURSES' },
1141 { 'name': 'cocoa', 'if': 'CONFIG_COCOA' },
1142 { 'name': 'spice-app', 'if': 'CONFIG_SPICE'} ] }
1144 ##
1145 # @DisplayOptions:
1146 #
1147 # Display (user interface) options.
1148 #
1149 # @type: Which DisplayType qemu should use.
1150 # @full-screen: Start user interface in fullscreen mode (default: off).
1151 # @window-close: Allow to quit qemu with window close button (default: on).
1152 # @show-cursor: Force showing the mouse cursor (default: off).
1153 # (since: 5.0)
1154 # @gl: Enable OpenGL support (default: off).
1155 #
1156 # Since: 2.12
1157 #
1158 ##
1159 { 'union' : 'DisplayOptions',
1160 'base' : { 'type' : 'DisplayType',
1161 '*full-screen' : 'bool',
1162 '*window-close' : 'bool',
1163 '*show-cursor' : 'bool',
1164 '*gl' : 'DisplayGLMode' },
1165 'discriminator' : 'type',
1166 'data' : {
1167 'gtk': { 'type': 'DisplayGTK', 'if': 'CONFIG_GTK' },
1168 'curses': { 'type': 'DisplayCurses', 'if': 'CONFIG_CURSES' },
1169 'egl-headless': { 'type': 'DisplayEGLHeadless',
1170 'if': { 'all': ['CONFIG_OPENGL', 'CONFIG_GBM'] } }
1171 }
1172 }
1174 ##
1175 # @query-display-options:
1176 #
1177 # Returns information about display configuration
1178 #
1179 # Returns: @DisplayOptions
1180 #
1181 # Since: 3.1
1182 #
1183 ##
1184 { 'command': 'query-display-options',
1185 'returns': 'DisplayOptions' }
1187 ##
1188 # @DisplayReloadType:
1189 #
1190 # Available DisplayReload types.
1191 #
1192 # @vnc: VNC display
1193 #
1194 # Since: 6.0
1195 #
1196 ##
1197 { 'enum': 'DisplayReloadType',
1198 'data': ['vnc'] }
1200 ##
1201 # @DisplayReloadOptionsVNC:
1202 #
1203 # Specify the VNC reload options.
1204 #
1205 # @tls-certs: reload tls certs or not.
1206 #
1207 # Since: 6.0
1208 #
1209 ##
1210 { 'struct': 'DisplayReloadOptionsVNC',
1211 'data': { '*tls-certs': 'bool' } }
1213 ##
1214 # @DisplayReloadOptions:
1215 #
1216 # Options of the display configuration reload.
1217 #
1218 # @type: Specify the display type.
1219 #
1220 # Since: 6.0
1221 #
1222 ##
1223 { 'union': 'DisplayReloadOptions',
1224 'base': {'type': 'DisplayReloadType'},
1225 'discriminator': 'type',
1226 'data': { 'vnc': 'DisplayReloadOptionsVNC' } }
1228 ##
1229 # @display-reload:
1230 #
1231 # Reload display configuration.
1232 #
1233 # Returns: Nothing on success.
1234 #
1235 # Since: 6.0
1236 #
1237 # Example:
1238 #
1239 # -> { "execute": "display-reload",
1240 # "arguments": { "type": "vnc", "tls-certs": true } }
1241 # <- { "return": {} }
1242 #
1243 ##
1244 { 'command': 'display-reload',
1245 'data': 'DisplayReloadOptions',
1246 'boxed' : true }