hw/block/tc58128.c

   1 #include "qemu/osdep.h"
   2 #include "hw/hw.h"
   3 #include "hw/sh4/sh.h"
   4 #include "hw/loader.h"
   5 #include "sysemu/qtest.h"
   6 #include "qemu/error-report.h"
   7
   8 #define CE1  0x0100
   9 #define CE2  0x0200
  10 #define RE   0x0400
  11 #define WE   0x0800
  12 #define ALE  0x1000
  13 #define CLE  0x2000
  14 #define RDY1 0x4000
  15 #define RDY2 0x8000
  16 #define RDY(n) ((n) == 0 ? RDY1 : RDY2)
  17
  18 typedef enum { WAIT, READ1, READ2, READ3 } state_t;
  19
  20 typedef struct {
  21     uint8_t *flash_contents;
  22     state_t state;
  23     uint32_t address;
  24     uint8_t address_cycle;
  25 } tc58128_dev;
  26
  27 static tc58128_dev tc58128_devs[2];
  28
  29 #define FLASH_SIZE (16*1024*1024)
  30
  31 static void init_dev(tc58128_dev * dev, const char *filename)
  32 {
  33     int ret, blocks;
  34
  35     dev->state = WAIT;
  36     dev->flash_contents = g_malloc(FLASH_SIZE);
  37     memset(dev->flash_contents, 0xff, FLASH_SIZE);
  38     if (filename) {
  39         /* Load flash image skipping the first block */
  40         ret = load_image(filename, dev->flash_contents + 528 * 32);
  41         if (ret < 0) {
  42             if (!qtest_enabled()) {
  43                 error_report("Could not load flash image %s", filename);
  44                 exit(1);
  45             }
  46         } else {
  47             /* Build first block with number of blocks */
  48             blocks = DIV_ROUND_UP(ret, 528 * 32);
  49             dev->flash_contents[0] = blocks & 0xff;
  50             dev->flash_contents[1] = (blocks >> 8) & 0xff;
  51             dev->flash_contents[2] = (blocks >> 16) & 0xff;
  52             dev->flash_contents[3] = (blocks >> 24) & 0xff;
  53             fprintf(stderr, "loaded %d bytes for %s into flash\n", ret,
  54                     filename);
  55         }
  56     }
  57 }
  58
  59 static void handle_command(tc58128_dev * dev, uint8_t command)
  60 {
  61     switch (command) {
  62     case 0xff:
  63         fprintf(stderr, "reset flash device\n");
  64         dev->state = WAIT;
  65         break;
  66     case 0x00:
  67         fprintf(stderr, "read mode 1\n");
  68         dev->state = READ1;
  69         dev->address_cycle = 0;
  70         break;
  71     case 0x01:
  72         fprintf(stderr, "read mode 2\n");
  73         dev->state = READ2;
  74         dev->address_cycle = 0;
  75         break;
  76     case 0x50:
  77         fprintf(stderr, "read mode 3\n");
  78         dev->state = READ3;
  79         dev->address_cycle = 0;
  80         break;
  81     default:
  82         fprintf(stderr, "unknown flash command 0x%02x\n", command);
  83         abort();
  84     }
  85 }
  86
  87 static void handle_address(tc58128_dev * dev, uint8_t data)
  88 {
  89     switch (dev->state) {
  90     case READ1:
  91     case READ2:
  92     case READ3:
  93         switch (dev->address_cycle) {
  94         case 0:
  95             dev->address = data;
  96             if (dev->state == READ2)
  97                 dev->address |= 0x100;
  98             else if (dev->state == READ3)
  99                 dev->address |= 0x200;
 100             break;
 101         case 1:
 102             dev->address += data * 528 * 0x100;
 103             break;
 104         case 2:
 105             dev->address += data * 528;
 106             fprintf(stderr, "address pointer in flash: 0x%08x\n",
 107                     dev->address);
 108             break;
 109         default:
 110             /* Invalid data */
 111             abort();
 112         }
 113         dev->address_cycle++;
 114         break;
 115     default:
 116         abort();
 117     }
 118 }
 119
 120 static uint8_t handle_read(tc58128_dev * dev)
 121 {
 122 #if 0
 123     if (dev->address % 0x100000 == 0)
 124         fprintf(stderr, "reading flash at address 0x%08x\n", dev->address);
 125 #endif
 126     return dev->flash_contents[dev->address++];
 127 }
 128
 129 /* We never mark the device as busy, so interrupts cannot be triggered
 130    XXXXX */
 131
 132 static int tc58128_cb(uint16_t porta, uint16_t portb,
 133                       uint16_t * periph_pdtra, uint16_t * periph_portadir,
 134                       uint16_t * periph_pdtrb, uint16_t * periph_portbdir)
 135 {
 136     int dev;
 137
 138     if ((porta & CE1) == 0)
 139         dev = 0;
 140     else if ((porta & CE2) == 0)
 141         dev = 1;
 142     else
 143         return 0;               /* No device selected */
 144
 145     if ((porta & RE) && (porta & WE)) {
 146         /* Nothing to do, assert ready and return to input state */
 147         *periph_portadir &= 0xff00;
 148         *periph_portadir |= RDY(dev);
 149         *periph_pdtra |= RDY(dev);
 150         return 1;
 151     }
 152
 153     if (porta & CLE) {
 154         /* Command */
 155         assert((porta & WE) == 0);
 156         handle_command(&tc58128_devs[dev], porta & 0x00ff);
 157     } else if (porta & ALE) {
 158         assert((porta & WE) == 0);
 159         handle_address(&tc58128_devs[dev], porta & 0x00ff);
 160     } else if ((porta & RE) == 0) {
 161         *periph_portadir |= 0x00ff;
 162         *periph_pdtra &= 0xff00;
 163         *periph_pdtra |= handle_read(&tc58128_devs[dev]);
 164     } else {
 165         abort();
 166     }
 167     return 1;
 168 }
 169
 170 static sh7750_io_device tc58128 = {
 171     RE | WE,                    /* Port A triggers */
 172     0,                          /* Port B triggers */
 173     tc58128_cb                  /* Callback */
 174 };
 175
 176 int tc58128_init(struct SH7750State *s, const char *zone1, const char *zone2)
 177 {
 178     init_dev(&tc58128_devs[0], zone1);
 179     init_dev(&tc58128_devs[1], zone2);
 180     return sh7750_register_io_device(s, &tc58128);
 181 }