| blob | 5f6b06172cabdc6f0ee0e751912518b5f3cdbcbe |
1 # -*- Mode: Python -*-
2 # vim: filetype=python
3 #
5 ##
6 # = Migration
7 ##
9 { 'include': 'common.json' }
10 { 'include': 'sockets.json' }
12 ##
13 # @MigrationStats:
14 #
15 # Detailed migration status.
16 #
17 # @transferred: amount of bytes already transferred to the target VM
18 #
19 # @remaining: amount of bytes remaining to be transferred to the target VM
20 #
21 # @total: total amount of bytes involved in the migration process
22 #
23 # @duplicate: number of duplicate (zero) pages (since 1.2)
24 #
25 # @skipped: number of skipped zero pages (since 1.5)
26 #
27 # @normal: number of normal pages (since 1.2)
28 #
29 # @normal-bytes: number of normal bytes sent (since 1.2)
30 #
31 # @dirty-pages-rate: number of pages dirtied by second by the
32 # guest (since 1.3)
33 #
34 # @mbps: throughput in megabits/sec. (since 1.6)
35 #
36 # @dirty-sync-count: number of times that dirty ram was synchronized (since 2.1)
37 #
38 # @postcopy-requests: The number of page requests received from the destination
39 # (since 2.7)
40 #
41 # @page-size: The number of bytes per page for the various page-based
42 # statistics (since 2.10)
43 #
44 # @multifd-bytes: The number of bytes sent through multifd (since 3.0)
45 #
46 # @pages-per-second: the number of memory pages transferred per second
47 # (Since 4.0)
48 #
49 # Since: 0.14.0
50 ##
51 { 'struct': 'MigrationStats',
52 'data': {'transferred': 'int', 'remaining': 'int', 'total': 'int' ,
53 'duplicate': 'int', 'skipped': 'int', 'normal': 'int',
54 'normal-bytes': 'int', 'dirty-pages-rate' : 'int',
55 'mbps' : 'number', 'dirty-sync-count' : 'int',
56 'postcopy-requests' : 'int', 'page-size' : 'int',
57 'multifd-bytes' : 'uint64', 'pages-per-second' : 'uint64' } }
59 ##
60 # @XBZRLECacheStats:
61 #
62 # Detailed XBZRLE migration cache statistics
63 #
64 # @cache-size: XBZRLE cache size
65 #
66 # @bytes: amount of bytes already transferred to the target VM
67 #
68 # @pages: amount of pages transferred to the target VM
69 #
70 # @cache-miss: number of cache miss
71 #
72 # @cache-miss-rate: rate of cache miss (since 2.1)
73 #
74 # @encoding-rate: rate of encoded bytes (since 5.1)
75 #
76 # @overflow: number of overflows
77 #
78 # Since: 1.2
79 ##
80 { 'struct': 'XBZRLECacheStats',
81 'data': {'cache-size': 'int', 'bytes': 'int', 'pages': 'int',
82 'cache-miss': 'int', 'cache-miss-rate': 'number',
83 'encoding-rate': 'number', 'overflow': 'int' } }
85 ##
86 # @CompressionStats:
87 #
88 # Detailed migration compression statistics
89 #
90 # @pages: amount of pages compressed and transferred to the target VM
91 #
92 # @busy: count of times that no free thread was available to compress data
93 #
94 # @busy-rate: rate of thread busy
95 #
96 # @compressed-size: amount of bytes after compression
97 #
98 # @compression-rate: rate of compressed size
99 #
100 # Since: 3.1
101 ##
102 { 'struct': 'CompressionStats',
103 'data': {'pages': 'int', 'busy': 'int', 'busy-rate': 'number',
104 'compressed-size': 'int', 'compression-rate': 'number' } }
106 ##
107 # @MigrationStatus:
108 #
109 # An enumeration of migration status.
110 #
111 # @none: no migration has ever happened.
112 #
113 # @setup: migration process has been initiated.
114 #
115 # @cancelling: in the process of cancelling migration.
116 #
117 # @cancelled: cancelling migration is finished.
118 #
119 # @active: in the process of doing migration.
120 #
121 # @postcopy-active: like active, but now in postcopy mode. (since 2.5)
122 #
123 # @postcopy-paused: during postcopy but paused. (since 3.0)
124 #
125 # @postcopy-recover: trying to recover from a paused postcopy. (since 3.0)
126 #
127 # @completed: migration is finished.
128 #
129 # @failed: some error occurred during migration process.
130 #
131 # @colo: VM is in the process of fault tolerance, VM can not get into this
132 # state unless colo capability is enabled for migration. (since 2.8)
133 #
134 # @pre-switchover: Paused before device serialisation. (since 2.11)
135 #
136 # @device: During device serialisation when pause-before-switchover is enabled
137 # (since 2.11)
138 #
139 # @wait-unplug: wait for device unplug request by guest OS to be completed.
140 # (since 4.2)
141 #
142 # Since: 2.3
143 #
144 ##
145 { 'enum': 'MigrationStatus',
146 'data': [ 'none', 'setup', 'cancelling', 'cancelled',
147 'active', 'postcopy-active', 'postcopy-paused',
148 'postcopy-recover', 'completed', 'failed', 'colo',
149 'pre-switchover', 'device', 'wait-unplug' ] }
151 ##
152 # @MigrationInfo:
153 #
154 # Information about current migration process.
155 #
156 # @status: @MigrationStatus describing the current migration status.
157 # If this field is not returned, no migration process
158 # has been initiated
159 #
160 # @ram: @MigrationStats containing detailed migration
161 # status, only returned if status is 'active' or
162 # 'completed'(since 1.2)
163 #
164 # @disk: @MigrationStats containing detailed disk migration
165 # status, only returned if status is 'active' and it is a block
166 # migration
167 #
168 # @xbzrle-cache: @XBZRLECacheStats containing detailed XBZRLE
169 # migration statistics, only returned if XBZRLE feature is on and
170 # status is 'active' or 'completed' (since 1.2)
171 #
172 # @total-time: total amount of milliseconds since migration started.
173 # If migration has ended, it returns the total migration
174 # time. (since 1.2)
175 #
176 # @downtime: only present when migration finishes correctly
177 # total downtime in milliseconds for the guest.
178 # (since 1.3)
179 #
180 # @expected-downtime: only present while migration is active
181 # expected downtime in milliseconds for the guest in last walk
182 # of the dirty bitmap. (since 1.3)
183 #
184 # @setup-time: amount of setup time in milliseconds *before* the
185 # iterations begin but *after* the QMP command is issued. This is designed
186 # to provide an accounting of any activities (such as RDMA pinning) which
187 # may be expensive, but do not actually occur during the iterative
188 # migration rounds themselves. (since 1.6)
189 #
190 # @cpu-throttle-percentage: percentage of time guest cpus are being
191 # throttled during auto-converge. This is only present when auto-converge
192 # has started throttling guest cpus. (Since 2.7)
193 #
194 # @error-desc: the human readable error description string, when
195 # @status is 'failed'. Clients should not attempt to parse the
196 # error strings. (Since 2.7)
197 #
198 # @postcopy-blocktime: total time when all vCPU were blocked during postcopy
199 # live migration. This is only present when the postcopy-blocktime
200 # migration capability is enabled. (Since 3.0)
201 #
202 # @postcopy-vcpu-blocktime: list of the postcopy blocktime per vCPU. This is
203 # only present when the postcopy-blocktime migration capability
204 # is enabled. (Since 3.0)
205 #
206 # @compression: migration compression statistics, only returned if compression
207 # feature is on and status is 'active' or 'completed' (Since 3.1)
208 #
209 # @socket-address: Only used for tcp, to know what the real port is (Since 4.0)
210 #
211 # Since: 0.14.0
212 ##
213 { 'struct': 'MigrationInfo',
214 'data': {'*status': 'MigrationStatus', '*ram': 'MigrationStats',
215 '*disk': 'MigrationStats',
216 '*xbzrle-cache': 'XBZRLECacheStats',
217 '*total-time': 'int',
218 '*expected-downtime': 'int',
219 '*downtime': 'int',
220 '*setup-time': 'int',
221 '*cpu-throttle-percentage': 'int',
222 '*error-desc': 'str',
223 '*postcopy-blocktime' : 'uint32',
224 '*postcopy-vcpu-blocktime': ['uint32'],
225 '*compression': 'CompressionStats',
226 '*socket-address': ['SocketAddress'] } }
228 ##
229 # @query-migrate:
230 #
231 # Returns information about current migration process. If migration
232 # is active there will be another json-object with RAM migration
233 # status and if block migration is active another one with block
234 # migration status.
235 #
236 # Returns: @MigrationInfo
237 #
238 # Since: 0.14.0
239 #
240 # Example:
241 #
242 # 1. Before the first migration
243 #
244 # -> { "execute": "query-migrate" }
245 # <- { "return": {} }
246 #
247 # 2. Migration is done and has succeeded
248 #
249 # -> { "execute": "query-migrate" }
250 # <- { "return": {
251 # "status": "completed",
252 # "total-time":12345,
253 # "setup-time":12345,
254 # "downtime":12345,
255 # "ram":{
256 # "transferred":123,
257 # "remaining":123,
258 # "total":246,
259 # "duplicate":123,
260 # "normal":123,
261 # "normal-bytes":123456,
262 # "dirty-sync-count":15
263 # }
264 # }
265 # }
266 #
267 # 3. Migration is done and has failed
268 #
269 # -> { "execute": "query-migrate" }
270 # <- { "return": { "status": "failed" } }
271 #
272 # 4. Migration is being performed and is not a block migration:
273 #
274 # -> { "execute": "query-migrate" }
275 # <- {
276 # "return":{
277 # "status":"active",
278 # "total-time":12345,
279 # "setup-time":12345,
280 # "expected-downtime":12345,
281 # "ram":{
282 # "transferred":123,
283 # "remaining":123,
284 # "total":246,
285 # "duplicate":123,
286 # "normal":123,
287 # "normal-bytes":123456,
288 # "dirty-sync-count":15
289 # }
290 # }
291 # }
292 #
293 # 5. Migration is being performed and is a block migration:
294 #
295 # -> { "execute": "query-migrate" }
296 # <- {
297 # "return":{
298 # "status":"active",
299 # "total-time":12345,
300 # "setup-time":12345,
301 # "expected-downtime":12345,
302 # "ram":{
303 # "total":1057024,
304 # "remaining":1053304,
305 # "transferred":3720,
306 # "duplicate":123,
307 # "normal":123,
308 # "normal-bytes":123456,
309 # "dirty-sync-count":15
310 # },
311 # "disk":{
312 # "total":20971520,
313 # "remaining":20880384,
314 # "transferred":91136
315 # }
316 # }
317 # }
318 #
319 # 6. Migration is being performed and XBZRLE is active:
320 #
321 # -> { "execute": "query-migrate" }
322 # <- {
323 # "return":{
324 # "status":"active",
325 # "total-time":12345,
326 # "setup-time":12345,
327 # "expected-downtime":12345,
328 # "ram":{
329 # "total":1057024,
330 # "remaining":1053304,
331 # "transferred":3720,
332 # "duplicate":10,
333 # "normal":3333,
334 # "normal-bytes":3412992,
335 # "dirty-sync-count":15
336 # },
337 # "xbzrle-cache":{
338 # "cache-size":67108864,
339 # "bytes":20971520,
340 # "pages":2444343,
341 # "cache-miss":2244,
342 # "cache-miss-rate":0.123,
343 # "encoding-rate":80.1,
344 # "overflow":34434
345 # }
346 # }
347 # }
348 #
349 ##
350 { 'command': 'query-migrate', 'returns': 'MigrationInfo' }
352 ##
353 # @MigrationCapability:
354 #
355 # Migration capabilities enumeration
356 #
357 # @xbzrle: Migration supports xbzrle (Xor Based Zero Run Length Encoding).
358 # This feature allows us to minimize migration traffic for certain work
359 # loads, by sending compressed difference of the pages
360 #
361 # @rdma-pin-all: Controls whether or not the entire VM memory footprint is
362 # mlock()'d on demand or all at once. Refer to docs/rdma.txt for usage.
363 # Disabled by default. (since 2.0)
364 #
365 # @zero-blocks: During storage migration encode blocks of zeroes efficiently. This
366 # essentially saves 1MB of zeroes per block on the wire. Enabling requires
367 # source and target VM to support this feature. To enable it is sufficient
368 # to enable the capability on the source VM. The feature is disabled by
369 # default. (since 1.6)
370 #
371 # @compress: Use multiple compression threads to accelerate live migration.
372 # This feature can help to reduce the migration traffic, by sending
373 # compressed pages. Please note that if compress and xbzrle are both
374 # on, compress only takes effect in the ram bulk stage, after that,
375 # it will be disabled and only xbzrle takes effect, this can help to
376 # minimize migration traffic. The feature is disabled by default.
377 # (since 2.4 )
378 #
379 # @events: generate events for each migration state change
380 # (since 2.4 )
381 #
382 # @auto-converge: If enabled, QEMU will automatically throttle down the guest
383 # to speed up convergence of RAM migration. (since 1.6)
384 #
385 # @postcopy-ram: Start executing on the migration target before all of RAM has
386 # been migrated, pulling the remaining pages along as needed. The
387 # capacity must have the same setting on both source and target
388 # or migration will not even start. NOTE: If the migration fails during
389 # postcopy the VM will fail. (since 2.6)
390 #
391 # @x-colo: If enabled, migration will never end, and the state of the VM on the
392 # primary side will be migrated continuously to the VM on secondary
393 # side, this process is called COarse-Grain LOck Stepping (COLO) for
394 # Non-stop Service. (since 2.8)
395 #
396 # @release-ram: if enabled, qemu will free the migrated ram pages on the source
397 # during postcopy-ram migration. (since 2.9)
398 #
399 # @block: If enabled, QEMU will also migrate the contents of all block
400 # devices. Default is disabled. A possible alternative uses
401 # mirror jobs to a builtin NBD server on the destination, which
402 # offers more flexibility.
403 # (Since 2.10)
404 #
405 # @return-path: If enabled, migration will use the return path even
406 # for precopy. (since 2.10)
407 #
408 # @pause-before-switchover: Pause outgoing migration before serialising device
409 # state and before disabling block IO (since 2.11)
410 #
411 # @multifd: Use more than one fd for migration (since 4.0)
412 #
413 # @dirty-bitmaps: If enabled, QEMU will migrate named dirty bitmaps.
414 # (since 2.12)
415 #
416 # @postcopy-blocktime: Calculate downtime for postcopy live migration
417 # (since 3.0)
418 #
419 # @late-block-activate: If enabled, the destination will not activate block
420 # devices (and thus take locks) immediately at the end of migration.
421 # (since 3.0)
422 #
423 # @x-ignore-shared: If enabled, QEMU will not migrate shared memory (since 4.0)
424 #
425 # @validate-uuid: Send the UUID of the source to allow the destination
426 # to ensure it is the same. (since 4.2)
427 #
428 # Since: 1.2
429 ##
430 { 'enum': 'MigrationCapability',
431 'data': ['xbzrle', 'rdma-pin-all', 'auto-converge', 'zero-blocks',
432 'compress', 'events', 'postcopy-ram', 'x-colo', 'release-ram',
433 'block', 'return-path', 'pause-before-switchover', 'multifd',
434 'dirty-bitmaps', 'postcopy-blocktime', 'late-block-activate',
435 'x-ignore-shared', 'validate-uuid' ] }
437 ##
438 # @MigrationCapabilityStatus:
439 #
440 # Migration capability information
441 #
442 # @capability: capability enum
443 #
444 # @state: capability state bool
445 #
446 # Since: 1.2
447 ##
448 { 'struct': 'MigrationCapabilityStatus',
449 'data': { 'capability' : 'MigrationCapability', 'state' : 'bool' } }
451 ##
452 # @migrate-set-capabilities:
453 #
454 # Enable/Disable the following migration capabilities (like xbzrle)
455 #
456 # @capabilities: json array of capability modifications to make
457 #
458 # Since: 1.2
459 #
460 # Example:
461 #
462 # -> { "execute": "migrate-set-capabilities" , "arguments":
463 # { "capabilities": [ { "capability": "xbzrle", "state": true } ] } }
464 #
465 ##
466 { 'command': 'migrate-set-capabilities',
467 'data': { 'capabilities': ['MigrationCapabilityStatus'] } }
469 ##
470 # @query-migrate-capabilities:
471 #
472 # Returns information about the current migration capabilities status
473 #
474 # Returns: @MigrationCapabilitiesStatus
475 #
476 # Since: 1.2
477 #
478 # Example:
479 #
480 # -> { "execute": "query-migrate-capabilities" }
481 # <- { "return": [
482 # {"state": false, "capability": "xbzrle"},
483 # {"state": false, "capability": "rdma-pin-all"},
484 # {"state": false, "capability": "auto-converge"},
485 # {"state": false, "capability": "zero-blocks"},
486 # {"state": false, "capability": "compress"},
487 # {"state": true, "capability": "events"},
488 # {"state": false, "capability": "postcopy-ram"},
489 # {"state": false, "capability": "x-colo"}
490 # ]}
491 #
492 ##
493 { 'command': 'query-migrate-capabilities', 'returns': ['MigrationCapabilityStatus']}
495 ##
496 # @MultiFDCompression:
497 #
498 # An enumeration of multifd compression methods.
499 #
500 # @none: no compression.
501 # @zlib: use zlib compression method.
502 # @zstd: use zstd compression method.
503 #
504 # Since: 5.0
505 #
506 ##
507 { 'enum': 'MultiFDCompression',
508 'data': [ 'none', 'zlib',
509 { 'name': 'zstd', 'if': 'defined(CONFIG_ZSTD)' } ] }
511 ##
512 # @BitmapMigrationBitmapAlias:
513 #
514 # @name: The name of the bitmap.
515 #
516 # @alias: An alias name for migration (for example the bitmap name on
517 # the opposite site).
518 #
519 # Since: 5.2
520 ##
521 { 'struct': 'BitmapMigrationBitmapAlias',
522 'data': {
523 'name': 'str',
524 'alias': 'str'
525 } }
527 ##
528 # @BitmapMigrationNodeAlias:
529 #
530 # Maps a block node name and the bitmaps it has to aliases for dirty
531 # bitmap migration.
532 #
533 # @node-name: A block node name.
534 #
535 # @alias: An alias block node name for migration (for example the
536 # node name on the opposite site).
537 #
538 # @bitmaps: Mappings for the bitmaps on this node.
539 #
540 # Since: 5.2
541 ##
542 { 'struct': 'BitmapMigrationNodeAlias',
543 'data': {
544 'node-name': 'str',
545 'alias': 'str',
546 'bitmaps': [ 'BitmapMigrationBitmapAlias' ]
547 } }
549 ##
550 # @MigrationParameter:
551 #
552 # Migration parameters enumeration
553 #
554 # @announce-initial: Initial delay (in milliseconds) before sending the first
555 # announce (Since 4.0)
556 #
557 # @announce-max: Maximum delay (in milliseconds) between packets in the
558 # announcement (Since 4.0)
559 #
560 # @announce-rounds: Number of self-announce packets sent after migration
561 # (Since 4.0)
562 #
563 # @announce-step: Increase in delay (in milliseconds) between subsequent
564 # packets in the announcement (Since 4.0)
565 #
566 # @compress-level: Set the compression level to be used in live migration,
567 # the compression level is an integer between 0 and 9, where 0 means
568 # no compression, 1 means the best compression speed, and 9 means best
569 # compression ratio which will consume more CPU.
570 #
571 # @compress-threads: Set compression thread count to be used in live migration,
572 # the compression thread count is an integer between 1 and 255.
573 #
574 # @compress-wait-thread: Controls behavior when all compression threads are
575 # currently busy. If true (default), wait for a free
576 # compression thread to become available; otherwise,
577 # send the page uncompressed. (Since 3.1)
578 #
579 # @decompress-threads: Set decompression thread count to be used in live
580 # migration, the decompression thread count is an integer between 1
581 # and 255. Usually, decompression is at least 4 times as fast as
582 # compression, so set the decompress-threads to the number about 1/4
583 # of compress-threads is adequate.
584 #
585 # @throttle-trigger-threshold: The ratio of bytes_dirty_period and bytes_xfer_period
586 # to trigger throttling. It is expressed as percentage.
587 # The default value is 50. (Since 5.0)
588 #
589 # @cpu-throttle-initial: Initial percentage of time guest cpus are throttled
590 # when migration auto-converge is activated. The
591 # default value is 20. (Since 2.7)
592 #
593 # @cpu-throttle-increment: throttle percentage increase each time
594 # auto-converge detects that migration is not making
595 # progress. The default value is 10. (Since 2.7)
596 #
597 # @cpu-throttle-tailslow: Make CPU throttling slower at tail stage
598 # At the tail stage of throttling, the Guest is very
599 # sensitive to CPU percentage while the @cpu-throttle
600 # -increment is excessive usually at tail stage.
601 # If this parameter is true, we will compute the ideal
602 # CPU percentage used by the Guest, which may exactly make
603 # the dirty rate match the dirty rate threshold. Then we
604 # will choose a smaller throttle increment between the
605 # one specified by @cpu-throttle-increment and the one
606 # generated by ideal CPU percentage.
607 # Therefore, it is compatible to traditional throttling,
608 # meanwhile the throttle increment won't be excessive
609 # at tail stage.
610 # The default value is false. (Since 5.1)
611 #
612 # @tls-creds: ID of the 'tls-creds' object that provides credentials for
613 # establishing a TLS connection over the migration data channel.
614 # On the outgoing side of the migration, the credentials must
615 # be for a 'client' endpoint, while for the incoming side the
616 # credentials must be for a 'server' endpoint. Setting this
617 # will enable TLS for all migrations. The default is unset,
618 # resulting in unsecured migration at the QEMU level. (Since 2.7)
619 #
620 # @tls-hostname: hostname of the target host for the migration. This is
621 # required when using x509 based TLS credentials and the
622 # migration URI does not already include a hostname. For
623 # example if using fd: or exec: based migration, the
624 # hostname must be provided so that the server's x509
625 # certificate identity can be validated. (Since 2.7)
626 #
627 # @tls-authz: ID of the 'authz' object subclass that provides access control
628 # checking of the TLS x509 certificate distinguished name.
629 # This object is only resolved at time of use, so can be deleted
630 # and recreated on the fly while the migration server is active.
631 # If missing, it will default to denying access (Since 4.0)
632 #
633 # @max-bandwidth: to set maximum speed for migration. maximum speed in
634 # bytes per second. (Since 2.8)
635 #
636 # @downtime-limit: set maximum tolerated downtime for migration. maximum
637 # downtime in milliseconds (Since 2.8)
638 #
639 # @x-checkpoint-delay: The delay time (in ms) between two COLO checkpoints in
640 # periodic mode. (Since 2.8)
641 #
642 # @block-incremental: Affects how much storage is migrated when the
643 # block migration capability is enabled. When false, the entire
644 # storage backing chain is migrated into a flattened image at
645 # the destination; when true, only the active qcow2 layer is
646 # migrated and the destination must already have access to the
647 # same backing chain as was used on the source. (since 2.10)
648 #
649 # @multifd-channels: Number of channels used to migrate data in
650 # parallel. This is the same number that the
651 # number of sockets used for migration. The
652 # default value is 2 (since 4.0)
653 #
654 # @xbzrle-cache-size: cache size to be used by XBZRLE migration. It
655 # needs to be a multiple of the target page size
656 # and a power of 2
657 # (Since 2.11)
658 #
659 # @max-postcopy-bandwidth: Background transfer bandwidth during postcopy.
660 # Defaults to 0 (unlimited). In bytes per second.
661 # (Since 3.0)
662 #
663 # @max-cpu-throttle: maximum cpu throttle percentage.
664 # Defaults to 99. (Since 3.1)
665 #
666 # @multifd-compression: Which compression method to use.
667 # Defaults to none. (Since 5.0)
668 #
669 # @multifd-zlib-level: Set the compression level to be used in live
670 # migration, the compression level is an integer between 0
671 # and 9, where 0 means no compression, 1 means the best
672 # compression speed, and 9 means best compression ratio which
673 # will consume more CPU.
674 # Defaults to 1. (Since 5.0)
675 #
676 # @multifd-zstd-level: Set the compression level to be used in live
677 # migration, the compression level is an integer between 0
678 # and 20, where 0 means no compression, 1 means the best
679 # compression speed, and 20 means best compression ratio which
680 # will consume more CPU.
681 # Defaults to 1. (Since 5.0)
682 #
683 # @block-bitmap-mapping: Maps block nodes and bitmaps on them to
684 # aliases for the purpose of dirty bitmap migration. Such
685 # aliases may for example be the corresponding names on the
686 # opposite site.
687 # The mapping must be one-to-one, but not necessarily
688 # complete: On the source, unmapped bitmaps and all bitmaps
689 # on unmapped nodes will be ignored. On the destination,
690 # encountering an unmapped alias in the incoming migration
691 # stream will result in a report, and all further bitmap
692 # migration data will then be discarded.
693 # Note that the destination does not know about bitmaps it
694 # does not receive, so there is no limitation or requirement
695 # regarding the number of bitmaps received, or how they are
696 # named, or on which nodes they are placed.
697 # By default (when this parameter has never been set), bitmap
698 # names are mapped to themselves. Nodes are mapped to their
699 # block device name if there is one, and to their node name
700 # otherwise. (Since 5.2)
701 #
702 # Since: 2.4
703 ##
704 { 'enum': 'MigrationParameter',
705 'data': ['announce-initial', 'announce-max',
706 'announce-rounds', 'announce-step',
707 'compress-level', 'compress-threads', 'decompress-threads',
708 'compress-wait-thread', 'throttle-trigger-threshold',
709 'cpu-throttle-initial', 'cpu-throttle-increment',
710 'cpu-throttle-tailslow',
711 'tls-creds', 'tls-hostname', 'tls-authz', 'max-bandwidth',
712 'downtime-limit', 'x-checkpoint-delay', 'block-incremental',
713 'multifd-channels',
714 'xbzrle-cache-size', 'max-postcopy-bandwidth',
715 'max-cpu-throttle', 'multifd-compression',
716 'multifd-zlib-level' ,'multifd-zstd-level',
717 'block-bitmap-mapping' ] }
719 ##
720 # @MigrateSetParameters:
721 #
722 # @announce-initial: Initial delay (in milliseconds) before sending the first
723 # announce (Since 4.0)
724 #
725 # @announce-max: Maximum delay (in milliseconds) between packets in the
726 # announcement (Since 4.0)
727 #
728 # @announce-rounds: Number of self-announce packets sent after migration
729 # (Since 4.0)
730 #
731 # @announce-step: Increase in delay (in milliseconds) between subsequent
732 # packets in the announcement (Since 4.0)
733 #
734 # @compress-level: compression level
735 #
736 # @compress-threads: compression thread count
737 #
738 # @compress-wait-thread: Controls behavior when all compression threads are
739 # currently busy. If true (default), wait for a free
740 # compression thread to become available; otherwise,
741 # send the page uncompressed. (Since 3.1)
742 #
743 # @decompress-threads: decompression thread count
744 #
745 # @throttle-trigger-threshold: The ratio of bytes_dirty_period and bytes_xfer_period
746 # to trigger throttling. It is expressed as percentage.
747 # The default value is 50. (Since 5.0)
748 #
749 # @cpu-throttle-initial: Initial percentage of time guest cpus are
750 # throttled when migration auto-converge is activated.
751 # The default value is 20. (Since 2.7)
752 #
753 # @cpu-throttle-increment: throttle percentage increase each time
754 # auto-converge detects that migration is not making
755 # progress. The default value is 10. (Since 2.7)
756 #
757 # @cpu-throttle-tailslow: Make CPU throttling slower at tail stage
758 # At the tail stage of throttling, the Guest is very
759 # sensitive to CPU percentage while the @cpu-throttle
760 # -increment is excessive usually at tail stage.
761 # If this parameter is true, we will compute the ideal
762 # CPU percentage used by the Guest, which may exactly make
763 # the dirty rate match the dirty rate threshold. Then we
764 # will choose a smaller throttle increment between the
765 # one specified by @cpu-throttle-increment and the one
766 # generated by ideal CPU percentage.
767 # Therefore, it is compatible to traditional throttling,
768 # meanwhile the throttle increment won't be excessive
769 # at tail stage.
770 # The default value is false. (Since 5.1)
771 #
772 # @tls-creds: ID of the 'tls-creds' object that provides credentials
773 # for establishing a TLS connection over the migration data
774 # channel. On the outgoing side of the migration, the credentials
775 # must be for a 'client' endpoint, while for the incoming side the
776 # credentials must be for a 'server' endpoint. Setting this
777 # to a non-empty string enables TLS for all migrations.
778 # An empty string means that QEMU will use plain text mode for
779 # migration, rather than TLS (Since 2.9)
780 # Previously (since 2.7), this was reported by omitting
781 # tls-creds instead.
782 #
783 # @tls-hostname: hostname of the target host for the migration. This
784 # is required when using x509 based TLS credentials and the
785 # migration URI does not already include a hostname. For
786 # example if using fd: or exec: based migration, the
787 # hostname must be provided so that the server's x509
788 # certificate identity can be validated. (Since 2.7)
789 # An empty string means that QEMU will use the hostname
790 # associated with the migration URI, if any. (Since 2.9)
791 # Previously (since 2.7), this was reported by omitting
792 # tls-hostname instead.
793 #
794 # @max-bandwidth: to set maximum speed for migration. maximum speed in
795 # bytes per second. (Since 2.8)
796 #
797 # @downtime-limit: set maximum tolerated downtime for migration. maximum
798 # downtime in milliseconds (Since 2.8)
799 #
800 # @x-checkpoint-delay: the delay time between two COLO checkpoints. (Since 2.8)
801 #
802 # @block-incremental: Affects how much storage is migrated when the
803 # block migration capability is enabled. When false, the entire
804 # storage backing chain is migrated into a flattened image at
805 # the destination; when true, only the active qcow2 layer is
806 # migrated and the destination must already have access to the
807 # same backing chain as was used on the source. (since 2.10)
808 #
809 # @multifd-channels: Number of channels used to migrate data in
810 # parallel. This is the same number that the
811 # number of sockets used for migration. The
812 # default value is 2 (since 4.0)
813 #
814 # @xbzrle-cache-size: cache size to be used by XBZRLE migration. It
815 # needs to be a multiple of the target page size
816 # and a power of 2
817 # (Since 2.11)
818 #
819 # @max-postcopy-bandwidth: Background transfer bandwidth during postcopy.
820 # Defaults to 0 (unlimited). In bytes per second.
821 # (Since 3.0)
822 #
823 # @max-cpu-throttle: maximum cpu throttle percentage.
824 # The default value is 99. (Since 3.1)
825 #
826 # @multifd-compression: Which compression method to use.
827 # Defaults to none. (Since 5.0)
828 #
829 # @multifd-zlib-level: Set the compression level to be used in live
830 # migration, the compression level is an integer between 0
831 # and 9, where 0 means no compression, 1 means the best
832 # compression speed, and 9 means best compression ratio which
833 # will consume more CPU.
834 # Defaults to 1. (Since 5.0)
835 #
836 # @multifd-zstd-level: Set the compression level to be used in live
837 # migration, the compression level is an integer between 0
838 # and 20, where 0 means no compression, 1 means the best
839 # compression speed, and 20 means best compression ratio which
840 # will consume more CPU.
841 # Defaults to 1. (Since 5.0)
842 #
843 # @block-bitmap-mapping: Maps block nodes and bitmaps on them to
844 # aliases for the purpose of dirty bitmap migration. Such
845 # aliases may for example be the corresponding names on the
846 # opposite site.
847 # The mapping must be one-to-one, but not necessarily
848 # complete: On the source, unmapped bitmaps and all bitmaps
849 # on unmapped nodes will be ignored. On the destination,
850 # encountering an unmapped alias in the incoming migration
851 # stream will result in a report, and all further bitmap
852 # migration data will then be discarded.
853 # Note that the destination does not know about bitmaps it
854 # does not receive, so there is no limitation or requirement
855 # regarding the number of bitmaps received, or how they are
856 # named, or on which nodes they are placed.
857 # By default (when this parameter has never been set), bitmap
858 # names are mapped to themselves. Nodes are mapped to their
859 # block device name if there is one, and to their node name
860 # otherwise. (Since 5.2)
861 #
862 # Since: 2.4
863 ##
864 # TODO either fuse back into MigrationParameters, or make
865 # MigrationParameters members mandatory
866 { 'struct': 'MigrateSetParameters',
867 'data': { '*announce-initial': 'size',
868 '*announce-max': 'size',
869 '*announce-rounds': 'size',
870 '*announce-step': 'size',
871 '*compress-level': 'int',
872 '*compress-threads': 'int',
873 '*compress-wait-thread': 'bool',
874 '*decompress-threads': 'int',
875 '*throttle-trigger-threshold': 'int',
876 '*cpu-throttle-initial': 'int',
877 '*cpu-throttle-increment': 'int',
878 '*cpu-throttle-tailslow': 'bool',
879 '*tls-creds': 'StrOrNull',
880 '*tls-hostname': 'StrOrNull',
881 '*tls-authz': 'StrOrNull',
882 '*max-bandwidth': 'int',
883 '*downtime-limit': 'int',
884 '*x-checkpoint-delay': 'int',
885 '*block-incremental': 'bool',
886 '*multifd-channels': 'int',
887 '*xbzrle-cache-size': 'size',
888 '*max-postcopy-bandwidth': 'size',
889 '*max-cpu-throttle': 'int',
890 '*multifd-compression': 'MultiFDCompression',
891 '*multifd-zlib-level': 'int',
892 '*multifd-zstd-level': 'int',
893 '*block-bitmap-mapping': [ 'BitmapMigrationNodeAlias' ] } }
895 ##
896 # @migrate-set-parameters:
897 #
898 # Set various migration parameters.
899 #
900 # Since: 2.4
901 #
902 # Example:
903 #
904 # -> { "execute": "migrate-set-parameters" ,
905 # "arguments": { "compress-level": 1 } }
906 #
907 ##
908 { 'command': 'migrate-set-parameters', 'boxed': true,
909 'data': 'MigrateSetParameters' }
911 ##
912 # @MigrationParameters:
913 #
914 # The optional members aren't actually optional.
915 #
916 # @announce-initial: Initial delay (in milliseconds) before sending the
917 # first announce (Since 4.0)
918 #
919 # @announce-max: Maximum delay (in milliseconds) between packets in the
920 # announcement (Since 4.0)
921 #
922 # @announce-rounds: Number of self-announce packets sent after migration
923 # (Since 4.0)
924 #
925 # @announce-step: Increase in delay (in milliseconds) between subsequent
926 # packets in the announcement (Since 4.0)
927 #
928 # @compress-level: compression level
929 #
930 # @compress-threads: compression thread count
931 #
932 # @compress-wait-thread: Controls behavior when all compression threads are
933 # currently busy. If true (default), wait for a free
934 # compression thread to become available; otherwise,
935 # send the page uncompressed. (Since 3.1)
936 #
937 # @decompress-threads: decompression thread count
938 #
939 # @throttle-trigger-threshold: The ratio of bytes_dirty_period and bytes_xfer_period
940 # to trigger throttling. It is expressed as percentage.
941 # The default value is 50. (Since 5.0)
942 #
943 # @cpu-throttle-initial: Initial percentage of time guest cpus are
944 # throttled when migration auto-converge is activated.
945 # (Since 2.7)
946 #
947 # @cpu-throttle-increment: throttle percentage increase each time
948 # auto-converge detects that migration is not making
949 # progress. (Since 2.7)
950 #
951 # @cpu-throttle-tailslow: Make CPU throttling slower at tail stage
952 # At the tail stage of throttling, the Guest is very
953 # sensitive to CPU percentage while the @cpu-throttle
954 # -increment is excessive usually at tail stage.
955 # If this parameter is true, we will compute the ideal
956 # CPU percentage used by the Guest, which may exactly make
957 # the dirty rate match the dirty rate threshold. Then we
958 # will choose a smaller throttle increment between the
959 # one specified by @cpu-throttle-increment and the one
960 # generated by ideal CPU percentage.
961 # Therefore, it is compatible to traditional throttling,
962 # meanwhile the throttle increment won't be excessive
963 # at tail stage.
964 # The default value is false. (Since 5.1)
965 #
966 # @tls-creds: ID of the 'tls-creds' object that provides credentials
967 # for establishing a TLS connection over the migration data
968 # channel. On the outgoing side of the migration, the credentials
969 # must be for a 'client' endpoint, while for the incoming side the
970 # credentials must be for a 'server' endpoint.
971 # An empty string means that QEMU will use plain text mode for
972 # migration, rather than TLS (Since 2.7)
973 # Note: 2.8 reports this by omitting tls-creds instead.
974 #
975 # @tls-hostname: hostname of the target host for the migration. This
976 # is required when using x509 based TLS credentials and the
977 # migration URI does not already include a hostname. For
978 # example if using fd: or exec: based migration, the
979 # hostname must be provided so that the server's x509
980 # certificate identity can be validated. (Since 2.7)
981 # An empty string means that QEMU will use the hostname
982 # associated with the migration URI, if any. (Since 2.9)
983 # Note: 2.8 reports this by omitting tls-hostname instead.
984 #
985 # @tls-authz: ID of the 'authz' object subclass that provides access control
986 # checking of the TLS x509 certificate distinguished name. (Since
987 # 4.0)
988 #
989 # @max-bandwidth: to set maximum speed for migration. maximum speed in
990 # bytes per second. (Since 2.8)
991 #
992 # @downtime-limit: set maximum tolerated downtime for migration. maximum
993 # downtime in milliseconds (Since 2.8)
994 #
995 # @x-checkpoint-delay: the delay time between two COLO checkpoints. (Since 2.8)
996 #
997 # @block-incremental: Affects how much storage is migrated when the
998 # block migration capability is enabled. When false, the entire
999 # storage backing chain is migrated into a flattened image at
1000 # the destination; when true, only the active qcow2 layer is
1001 # migrated and the destination must already have access to the
1002 # same backing chain as was used on the source. (since 2.10)
1003 #
1004 # @multifd-channels: Number of channels used to migrate data in
1005 # parallel. This is the same number that the
1006 # number of sockets used for migration.
1007 # The default value is 2 (since 4.0)
1008 #
1009 # @xbzrle-cache-size: cache size to be used by XBZRLE migration. It
1010 # needs to be a multiple of the target page size
1011 # and a power of 2
1012 # (Since 2.11)
1013 #
1014 # @max-postcopy-bandwidth: Background transfer bandwidth during postcopy.
1015 # Defaults to 0 (unlimited). In bytes per second.
1016 # (Since 3.0)
1017 #
1018 # @max-cpu-throttle: maximum cpu throttle percentage.
1019 # Defaults to 99.
1020 # (Since 3.1)
1021 #
1022 # @multifd-compression: Which compression method to use.
1023 # Defaults to none. (Since 5.0)
1024 #
1025 # @multifd-zlib-level: Set the compression level to be used in live
1026 # migration, the compression level is an integer between 0
1027 # and 9, where 0 means no compression, 1 means the best
1028 # compression speed, and 9 means best compression ratio which
1029 # will consume more CPU.
1030 # Defaults to 1. (Since 5.0)
1031 #
1032 # @multifd-zstd-level: Set the compression level to be used in live
1033 # migration, the compression level is an integer between 0
1034 # and 20, where 0 means no compression, 1 means the best
1035 # compression speed, and 20 means best compression ratio which
1036 # will consume more CPU.
1037 # Defaults to 1. (Since 5.0)
1038 #
1039 # @block-bitmap-mapping: Maps block nodes and bitmaps on them to
1040 # aliases for the purpose of dirty bitmap migration. Such
1041 # aliases may for example be the corresponding names on the
1042 # opposite site.
1043 # The mapping must be one-to-one, but not necessarily
1044 # complete: On the source, unmapped bitmaps and all bitmaps
1045 # on unmapped nodes will be ignored. On the destination,
1046 # encountering an unmapped alias in the incoming migration
1047 # stream will result in a report, and all further bitmap
1048 # migration data will then be discarded.
1049 # Note that the destination does not know about bitmaps it
1050 # does not receive, so there is no limitation or requirement
1051 # regarding the number of bitmaps received, or how they are
1052 # named, or on which nodes they are placed.
1053 # By default (when this parameter has never been set), bitmap
1054 # names are mapped to themselves. Nodes are mapped to their
1055 # block device name if there is one, and to their node name
1056 # otherwise. (Since 5.2)
1057 #
1058 # Since: 2.4
1059 ##
1060 { 'struct': 'MigrationParameters',
1061 'data': { '*announce-initial': 'size',
1062 '*announce-max': 'size',
1063 '*announce-rounds': 'size',
1064 '*announce-step': 'size',
1065 '*compress-level': 'uint8',
1066 '*compress-threads': 'uint8',
1067 '*compress-wait-thread': 'bool',
1068 '*decompress-threads': 'uint8',
1069 '*throttle-trigger-threshold': 'uint8',
1070 '*cpu-throttle-initial': 'uint8',
1071 '*cpu-throttle-increment': 'uint8',
1072 '*cpu-throttle-tailslow': 'bool',
1073 '*tls-creds': 'str',
1074 '*tls-hostname': 'str',
1075 '*tls-authz': 'str',
1076 '*max-bandwidth': 'size',
1077 '*downtime-limit': 'uint64',
1078 '*x-checkpoint-delay': 'uint32',
1079 '*block-incremental': 'bool' ,
1080 '*multifd-channels': 'uint8',
1081 '*xbzrle-cache-size': 'size',
1082 '*max-postcopy-bandwidth': 'size',
1083 '*max-cpu-throttle': 'uint8',
1084 '*multifd-compression': 'MultiFDCompression',
1085 '*multifd-zlib-level': 'uint8',
1086 '*multifd-zstd-level': 'uint8',
1087 '*block-bitmap-mapping': [ 'BitmapMigrationNodeAlias' ] } }
1089 ##
1090 # @query-migrate-parameters:
1091 #
1092 # Returns information about the current migration parameters
1093 #
1094 # Returns: @MigrationParameters
1095 #
1096 # Since: 2.4
1097 #
1098 # Example:
1099 #
1100 # -> { "execute": "query-migrate-parameters" }
1101 # <- { "return": {
1102 # "decompress-threads": 2,
1103 # "cpu-throttle-increment": 10,
1104 # "compress-threads": 8,
1105 # "compress-level": 1,
1106 # "cpu-throttle-initial": 20,
1107 # "max-bandwidth": 33554432,
1108 # "downtime-limit": 300
1109 # }
1110 # }
1111 #
1112 ##
1113 { 'command': 'query-migrate-parameters',
1114 'returns': 'MigrationParameters' }
1116 ##
1117 # @client_migrate_info:
1118 #
1119 # Set migration information for remote display. This makes the server
1120 # ask the client to automatically reconnect using the new parameters
1121 # once migration finished successfully. Only implemented for SPICE.
1122 #
1123 # @protocol: must be "spice"
1124 # @hostname: migration target hostname
1125 # @port: spice tcp port for plaintext channels
1126 # @tls-port: spice tcp port for tls-secured channels
1127 # @cert-subject: server certificate subject
1128 #
1129 # Since: 0.14.0
1130 #
1131 # Example:
1132 #
1133 # -> { "execute": "client_migrate_info",
1134 # "arguments": { "protocol": "spice",
1135 # "hostname": "virt42.lab.kraxel.org",
1136 # "port": 1234 } }
1137 # <- { "return": {} }
1138 #
1139 ##
1140 { 'command': 'client_migrate_info',
1141 'data': { 'protocol': 'str', 'hostname': 'str', '*port': 'int',
1142 '*tls-port': 'int', '*cert-subject': 'str' } }
1144 ##
1145 # @migrate-start-postcopy:
1146 #
1147 # Followup to a migration command to switch the migration to postcopy mode.
1148 # The postcopy-ram capability must be set on both source and destination
1149 # before the original migration command.
1150 #
1151 # Since: 2.5
1152 #
1153 # Example:
1154 #
1155 # -> { "execute": "migrate-start-postcopy" }
1156 # <- { "return": {} }
1157 #
1158 ##
1159 { 'command': 'migrate-start-postcopy' }
1161 ##
1162 # @MIGRATION:
1163 #
1164 # Emitted when a migration event happens
1165 #
1166 # @status: @MigrationStatus describing the current migration status.
1167 #
1168 # Since: 2.4
1169 #
1170 # Example:
1171 #
1172 # <- {"timestamp": {"seconds": 1432121972, "microseconds": 744001},
1173 # "event": "MIGRATION",
1174 # "data": {"status": "completed"} }
1175 #
1176 ##
1177 { 'event': 'MIGRATION',
1178 'data': {'status': 'MigrationStatus'}}
1180 ##
1181 # @MIGRATION_PASS:
1182 #
1183 # Emitted from the source side of a migration at the start of each pass
1184 # (when it syncs the dirty bitmap)
1185 #
1186 # @pass: An incrementing count (starting at 1 on the first pass)
1187 #
1188 # Since: 2.6
1189 #
1190 # Example:
1191 #
1192 # { "timestamp": {"seconds": 1449669631, "microseconds": 239225},
1193 # "event": "MIGRATION_PASS", "data": {"pass": 2} }
1194 #
1195 ##
1196 { 'event': 'MIGRATION_PASS',
1197 'data': { 'pass': 'int' } }
1199 ##
1200 # @COLOMessage:
1201 #
1202 # The message transmission between Primary side and Secondary side.
1203 #
1204 # @checkpoint-ready: Secondary VM (SVM) is ready for checkpointing
1205 #
1206 # @checkpoint-request: Primary VM (PVM) tells SVM to prepare for checkpointing
1207 #
1208 # @checkpoint-reply: SVM gets PVM's checkpoint request
1209 #
1210 # @vmstate-send: VM's state will be sent by PVM.
1211 #
1212 # @vmstate-size: The total size of VMstate.
1213 #
1214 # @vmstate-received: VM's state has been received by SVM.
1215 #
1216 # @vmstate-loaded: VM's state has been loaded by SVM.
1217 #
1218 # Since: 2.8
1219 ##
1220 { 'enum': 'COLOMessage',
1221 'data': [ 'checkpoint-ready', 'checkpoint-request', 'checkpoint-reply',
1222 'vmstate-send', 'vmstate-size', 'vmstate-received',
1223 'vmstate-loaded' ] }
1225 ##
1226 # @COLOMode:
1227 #
1228 # The COLO current mode.
1229 #
1230 # @none: COLO is disabled.
1231 #
1232 # @primary: COLO node in primary side.
1233 #
1234 # @secondary: COLO node in slave side.
1235 #
1236 # Since: 2.8
1237 ##
1238 { 'enum': 'COLOMode',
1239 'data': [ 'none', 'primary', 'secondary'] }
1241 ##
1242 # @FailoverStatus:
1243 #
1244 # An enumeration of COLO failover status
1245 #
1246 # @none: no failover has ever happened
1247 #
1248 # @require: got failover requirement but not handled
1249 #
1250 # @active: in the process of doing failover
1251 #
1252 # @completed: finish the process of failover
1253 #
1254 # @relaunch: restart the failover process, from 'none' -> 'completed' (Since 2.9)
1255 #
1256 # Since: 2.8
1257 ##
1258 { 'enum': 'FailoverStatus',
1259 'data': [ 'none', 'require', 'active', 'completed', 'relaunch' ] }
1261 ##
1262 # @COLO_EXIT:
1263 #
1264 # Emitted when VM finishes COLO mode due to some errors happening or
1265 # at the request of users.
1266 #
1267 # @mode: report COLO mode when COLO exited.
1268 #
1269 # @reason: describes the reason for the COLO exit.
1270 #
1271 # Since: 3.1
1272 #
1273 # Example:
1274 #
1275 # <- { "timestamp": {"seconds": 2032141960, "microseconds": 417172},
1276 # "event": "COLO_EXIT", "data": {"mode": "primary", "reason": "request" } }
1277 #
1278 ##
1279 { 'event': 'COLO_EXIT',
1280 'data': {'mode': 'COLOMode', 'reason': 'COLOExitReason' } }
1282 ##
1283 # @COLOExitReason:
1284 #
1285 # The reason for a COLO exit.
1286 #
1287 # @none: failover has never happened. This state does not occur
1288 # in the COLO_EXIT event, and is only visible in the result of
1289 # query-colo-status.
1290 #
1291 # @request: COLO exit is due to an external request.
1292 #
1293 # @error: COLO exit is due to an internal error.
1294 #
1295 # @processing: COLO is currently handling a failover (since 4.0).
1296 #
1297 # Since: 3.1
1298 ##
1299 { 'enum': 'COLOExitReason',
1300 'data': [ 'none', 'request', 'error' , 'processing' ] }
1302 ##
1303 # @x-colo-lost-heartbeat:
1304 #
1305 # Tell qemu that heartbeat is lost, request it to do takeover procedures.
1306 # If this command is sent to the PVM, the Primary side will exit COLO mode.
1307 # If sent to the Secondary, the Secondary side will run failover work,
1308 # then takes over server operation to become the service VM.
1309 #
1310 # Since: 2.8
1311 #
1312 # Example:
1313 #
1314 # -> { "execute": "x-colo-lost-heartbeat" }
1315 # <- { "return": {} }
1316 #
1317 ##
1318 { 'command': 'x-colo-lost-heartbeat' }
1320 ##
1321 # @migrate_cancel:
1322 #
1323 # Cancel the current executing migration process.
1324 #
1325 # Returns: nothing on success
1326 #
1327 # Notes: This command succeeds even if there is no migration process running.
1328 #
1329 # Since: 0.14.0
1330 #
1331 # Example:
1332 #
1333 # -> { "execute": "migrate_cancel" }
1334 # <- { "return": {} }
1335 #
1336 ##
1337 { 'command': 'migrate_cancel' }
1339 ##
1340 # @migrate-continue:
1341 #
1342 # Continue migration when it's in a paused state.
1343 #
1344 # @state: The state the migration is currently expected to be in
1345 #
1346 # Returns: nothing on success
1347 # Since: 2.11
1348 # Example:
1349 #
1350 # -> { "execute": "migrate-continue" , "arguments":
1351 # { "state": "pre-switchover" } }
1352 # <- { "return": {} }
1353 ##
1354 { 'command': 'migrate-continue', 'data': {'state': 'MigrationStatus'} }
1356 ##
1357 # @migrate_set_downtime:
1358 #
1359 # Set maximum tolerated downtime for migration.
1360 #
1361 # @value: maximum downtime in seconds
1362 #
1363 # Features:
1364 # @deprecated: This command is deprecated. Use
1365 # 'migrate-set-parameters' instead.
1366 #
1367 # Returns: nothing on success
1368 #
1369 # Since: 0.14.0
1370 #
1371 # Example:
1372 #
1373 # -> { "execute": "migrate_set_downtime", "arguments": { "value": 0.1 } }
1374 # <- { "return": {} }
1375 #
1376 ##
1377 { 'command': 'migrate_set_downtime', 'data': {'value': 'number'},
1378 'features': [ 'deprecated' ] }
1380 ##
1381 # @migrate_set_speed:
1382 #
1383 # Set maximum speed for migration.
1384 #
1385 # @value: maximum speed in bytes per second.
1386 #
1387 # Features:
1388 # @deprecated: This command is deprecated. Use
1389 # 'migrate-set-parameters' instead.
1390 #
1391 # Returns: nothing on success
1392 #
1393 # Since: 0.14.0
1394 #
1395 # Example:
1396 #
1397 # -> { "execute": "migrate_set_speed", "arguments": { "value": 1024 } }
1398 # <- { "return": {} }
1399 #
1400 ##
1401 { 'command': 'migrate_set_speed', 'data': {'value': 'int'},
1402 'features': [ 'deprecated' ] }
1404 ##
1405 # @migrate-set-cache-size:
1406 #
1407 # Set cache size to be used by XBZRLE migration
1408 #
1409 # @value: cache size in bytes
1410 #
1411 # Features:
1412 # @deprecated: This command is deprecated. Use
1413 # 'migrate-set-parameters' instead.
1414 #
1415 # The size will be rounded down to the nearest power of 2.
1416 # The cache size can be modified before and during ongoing migration
1417 #
1418 # Returns: nothing on success
1419 #
1420 # Since: 1.2
1421 #
1422 # Example:
1423 #
1424 # -> { "execute": "migrate-set-cache-size",
1425 # "arguments": { "value": 536870912 } }
1426 # <- { "return": {} }
1427 #
1428 ##
1429 { 'command': 'migrate-set-cache-size', 'data': {'value': 'int'},
1430 'features': [ 'deprecated' ] }
1432 ##
1433 # @query-migrate-cache-size:
1434 #
1435 # Query migration XBZRLE cache size
1436 #
1437 # Features:
1438 # @deprecated: This command is deprecated. Use
1439 # 'query-migrate-parameters' instead.
1440 #
1441 # Returns: XBZRLE cache size in bytes
1442 #
1443 # Since: 1.2
1444 #
1445 # Example:
1446 #
1447 # -> { "execute": "query-migrate-cache-size" }
1448 # <- { "return": 67108864 }
1449 #
1450 ##
1451 { 'command': 'query-migrate-cache-size', 'returns': 'int',
1452 'features': [ 'deprecated' ] }
1454 ##
1455 # @migrate:
1456 #
1457 # Migrates the current running guest to another Virtual Machine.
1458 #
1459 # @uri: the Uniform Resource Identifier of the destination VM
1460 #
1461 # @blk: do block migration (full disk copy)
1462 #
1463 # @inc: incremental disk copy migration
1464 #
1465 # @detach: this argument exists only for compatibility reasons and
1466 # is ignored by QEMU
1467 #
1468 # @resume: resume one paused migration, default "off". (since 3.0)
1469 #
1470 # Returns: nothing on success
1471 #
1472 # Since: 0.14.0
1473 #
1474 # Notes:
1475 #
1476 # 1. The 'query-migrate' command should be used to check migration's progress
1477 # and final result (this information is provided by the 'status' member)
1478 #
1479 # 2. All boolean arguments default to false
1480 #
1481 # 3. The user Monitor's "detach" argument is invalid in QMP and should not
1482 # be used
1483 #
1484 # Example:
1485 #
1486 # -> { "execute": "migrate", "arguments": { "uri": "tcp:0:4446" } }
1487 # <- { "return": {} }
1488 #
1489 ##
1490 { 'command': 'migrate',
1491 'data': {'uri': 'str', '*blk': 'bool', '*inc': 'bool',
1492 '*detach': 'bool', '*resume': 'bool' } }
1494 ##
1495 # @migrate-incoming:
1496 #
1497 # Start an incoming migration, the qemu must have been started
1498 # with -incoming defer
1499 #
1500 # @uri: The Uniform Resource Identifier identifying the source or
1501 # address to listen on
1502 #
1503 # Returns: nothing on success
1504 #
1505 # Since: 2.3
1506 #
1507 # Notes:
1508 #
1509 # 1. It's a bad idea to use a string for the uri, but it needs to stay
1510 # compatible with -incoming and the format of the uri is already exposed
1511 # above libvirt.
1512 #
1513 # 2. QEMU must be started with -incoming defer to allow migrate-incoming to
1514 # be used.
1515 #
1516 # 3. The uri format is the same as for -incoming
1517 #
1518 # Example:
1519 #
1520 # -> { "execute": "migrate-incoming",
1521 # "arguments": { "uri": "tcp::4446" } }
1522 # <- { "return": {} }
1523 #
1524 ##
1525 { 'command': 'migrate-incoming', 'data': {'uri': 'str' } }
1527 ##
1528 # @xen-save-devices-state:
1529 #
1530 # Save the state of all devices to file. The RAM and the block devices
1531 # of the VM are not saved by this command.
1532 #
1533 # @filename: the file to save the state of the devices to as binary
1534 # data. See xen-save-devices-state.txt for a description of the binary
1535 # format.
1536 #
1537 # @live: Optional argument to ask QEMU to treat this command as part of a live
1538 # migration. Default to true. (since 2.11)
1539 #
1540 # Returns: Nothing on success
1541 #
1542 # Since: 1.1
1543 #
1544 # Example:
1545 #
1546 # -> { "execute": "xen-save-devices-state",
1547 # "arguments": { "filename": "/tmp/save" } }
1548 # <- { "return": {} }
1549 #
1550 ##
1551 { 'command': 'xen-save-devices-state',
1552 'data': {'filename': 'str', '*live':'bool' } }
1554 ##
1555 # @xen-set-replication:
1556 #
1557 # Enable or disable replication.
1558 #
1559 # @enable: true to enable, false to disable.
1560 #
1561 # @primary: true for primary or false for secondary.
1562 #
1563 # @failover: true to do failover, false to stop. but cannot be
1564 # specified if 'enable' is true. default value is false.
1565 #
1566 # Returns: nothing.
1567 #
1568 # Example:
1569 #
1570 # -> { "execute": "xen-set-replication",
1571 # "arguments": {"enable": true, "primary": false} }
1572 # <- { "return": {} }
1573 #
1574 # Since: 2.9
1575 ##
1576 { 'command': 'xen-set-replication',
1577 'data': { 'enable': 'bool', 'primary': 'bool', '*failover' : 'bool' },
1578 'if': 'defined(CONFIG_REPLICATION)' }
1580 ##
1581 # @ReplicationStatus:
1582 #
1583 # The result format for 'query-xen-replication-status'.
1584 #
1585 # @error: true if an error happened, false if replication is normal.
1586 #
1587 # @desc: the human readable error description string, when
1588 # @error is 'true'.
1589 #
1590 # Since: 2.9
1591 ##
1592 { 'struct': 'ReplicationStatus',
1593 'data': { 'error': 'bool', '*desc': 'str' },
1594 'if': 'defined(CONFIG_REPLICATION)' }
1596 ##
1597 # @query-xen-replication-status:
1598 #
1599 # Query replication status while the vm is running.
1600 #
1601 # Returns: A @ReplicationResult object showing the status.
1602 #
1603 # Example:
1604 #
1605 # -> { "execute": "query-xen-replication-status" }
1606 # <- { "return": { "error": false } }
1607 #
1608 # Since: 2.9
1609 ##
1610 { 'command': 'query-xen-replication-status',
1611 'returns': 'ReplicationStatus',
1612 'if': 'defined(CONFIG_REPLICATION)' }
1614 ##
1615 # @xen-colo-do-checkpoint:
1616 #
1617 # Xen uses this command to notify replication to trigger a checkpoint.
1618 #
1619 # Returns: nothing.
1620 #
1621 # Example:
1622 #
1623 # -> { "execute": "xen-colo-do-checkpoint" }
1624 # <- { "return": {} }
1625 #
1626 # Since: 2.9
1627 ##
1628 { 'command': 'xen-colo-do-checkpoint',
1629 'if': 'defined(CONFIG_REPLICATION)' }
1631 ##
1632 # @COLOStatus:
1633 #
1634 # The result format for 'query-colo-status'.
1635 #
1636 # @mode: COLO running mode. If COLO is running, this field will return
1637 # 'primary' or 'secondary'.
1638 #
1639 # @last-mode: COLO last running mode. If COLO is running, this field
1640 # will return same like mode field, after failover we can
1641 # use this field to get last colo mode. (since 4.0)
1642 #
1643 # @reason: describes the reason for the COLO exit.
1644 #
1645 # Since: 3.1
1646 ##
1647 { 'struct': 'COLOStatus',
1648 'data': { 'mode': 'COLOMode', 'last-mode': 'COLOMode',
1649 'reason': 'COLOExitReason' } }
1651 ##
1652 # @query-colo-status:
1653 #
1654 # Query COLO status while the vm is running.
1655 #
1656 # Returns: A @COLOStatus object showing the status.
1657 #
1658 # Example:
1659 #
1660 # -> { "execute": "query-colo-status" }
1661 # <- { "return": { "mode": "primary", "reason": "request" } }
1662 #
1663 # Since: 3.1
1664 ##
1665 { 'command': 'query-colo-status',
1666 'returns': 'COLOStatus' }
1668 ##
1669 # @migrate-recover:
1670 #
1671 # Provide a recovery migration stream URI.
1672 #
1673 # @uri: the URI to be used for the recovery of migration stream.
1674 #
1675 # Returns: nothing.
1676 #
1677 # Example:
1678 #
1679 # -> { "execute": "migrate-recover",
1680 # "arguments": { "uri": "tcp:192.168.1.200:12345" } }
1681 # <- { "return": {} }
1682 #
1683 # Since: 3.0
1684 ##
1685 { 'command': 'migrate-recover',
1686 'data': { 'uri': 'str' },
1687 'allow-oob': true }
1689 ##
1690 # @migrate-pause:
1691 #
1692 # Pause a migration. Currently it only supports postcopy.
1693 #
1694 # Returns: nothing.
1695 #
1696 # Example:
1697 #
1698 # -> { "execute": "migrate-pause" }
1699 # <- { "return": {} }
1700 #
1701 # Since: 3.0
1702 ##
1703 { 'command': 'migrate-pause', 'allow-oob': true }
1705 ##
1706 # @UNPLUG_PRIMARY:
1707 #
1708 # Emitted from source side of a migration when migration state is
1709 # WAIT_UNPLUG. Device was unplugged by guest operating system.
1710 # Device resources in QEMU are kept on standby to be able to re-plug it in case
1711 # of migration failure.
1712 #
1713 # @device-id: QEMU device id of the unplugged device
1714 #
1715 # Since: 4.2
1716 #
1717 # Example:
1718 # {"event": "UNPLUG_PRIMARY", "data": {"device-id": "hostdev0"} }
1719 #
1720 ##
1721 { 'event': 'UNPLUG_PRIMARY',
1722 'data': { 'device-id': 'str' } }