2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 #include "config-host.h"
25 #include "qemu-common.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "qmp-commands.h"
36 #include "qemu/timer.h"
39 #include <sys/types.h>
41 #include <sys/ioctl.h>
42 #include <sys/queue.h>
52 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
55 BDRV_REQ_COPY_ON_READ
= 0x1,
56 BDRV_REQ_ZERO_WRITE
= 0x2,
59 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
);
60 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
61 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
62 BlockDriverCompletionFunc
*cb
, void *opaque
);
63 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
64 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
65 BlockDriverCompletionFunc
*cb
, void *opaque
);
66 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
67 int64_t sector_num
, int nb_sectors
,
69 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
70 int64_t sector_num
, int nb_sectors
,
72 static int coroutine_fn
bdrv_co_do_readv(BlockDriverState
*bs
,
73 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
74 BdrvRequestFlags flags
);
75 static int coroutine_fn
bdrv_co_do_writev(BlockDriverState
*bs
,
76 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
77 BdrvRequestFlags flags
);
78 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
82 BlockDriverCompletionFunc
*cb
,
85 static void coroutine_fn
bdrv_co_do_rw(void *opaque
);
86 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
87 int64_t sector_num
, int nb_sectors
);
89 static bool bdrv_exceed_bps_limits(BlockDriverState
*bs
, int nb_sectors
,
90 bool is_write
, double elapsed_time
, uint64_t *wait
);
91 static bool bdrv_exceed_iops_limits(BlockDriverState
*bs
, bool is_write
,
92 double elapsed_time
, uint64_t *wait
);
93 static bool bdrv_exceed_io_limits(BlockDriverState
*bs
, int nb_sectors
,
94 bool is_write
, int64_t *wait
);
96 static QTAILQ_HEAD(, BlockDriverState
) bdrv_states
=
97 QTAILQ_HEAD_INITIALIZER(bdrv_states
);
99 static QLIST_HEAD(, BlockDriver
) bdrv_drivers
=
100 QLIST_HEAD_INITIALIZER(bdrv_drivers
);
102 /* The device to use for VM snapshots */
103 static BlockDriverState
*bs_snapshots
;
105 /* If non-zero, use only whitelisted block drivers */
106 static int use_bdrv_whitelist
;
109 static int is_windows_drive_prefix(const char *filename
)
111 return (((filename
[0] >= 'a' && filename
[0] <= 'z') ||
112 (filename
[0] >= 'A' && filename
[0] <= 'Z')) &&
116 int is_windows_drive(const char *filename
)
118 if (is_windows_drive_prefix(filename
) &&
121 if (strstart(filename
, "\\\\.\\", NULL
) ||
122 strstart(filename
, "//./", NULL
))
128 /* throttling disk I/O limits */
129 void bdrv_io_limits_disable(BlockDriverState
*bs
)
131 bs
->io_limits_enabled
= false;
133 while (qemu_co_queue_next(&bs
->throttled_reqs
));
135 if (bs
->block_timer
) {
136 qemu_del_timer(bs
->block_timer
);
137 qemu_free_timer(bs
->block_timer
);
138 bs
->block_timer
= NULL
;
144 memset(&bs
->io_base
, 0, sizeof(bs
->io_base
));
147 static void bdrv_block_timer(void *opaque
)
149 BlockDriverState
*bs
= opaque
;
151 qemu_co_queue_next(&bs
->throttled_reqs
);
154 void bdrv_io_limits_enable(BlockDriverState
*bs
)
156 qemu_co_queue_init(&bs
->throttled_reqs
);
157 bs
->block_timer
= qemu_new_timer_ns(vm_clock
, bdrv_block_timer
, bs
);
158 bs
->io_limits_enabled
= true;
161 bool bdrv_io_limits_enabled(BlockDriverState
*bs
)
163 BlockIOLimit
*io_limits
= &bs
->io_limits
;
164 return io_limits
->bps
[BLOCK_IO_LIMIT_READ
]
165 || io_limits
->bps
[BLOCK_IO_LIMIT_WRITE
]
166 || io_limits
->bps
[BLOCK_IO_LIMIT_TOTAL
]
167 || io_limits
->iops
[BLOCK_IO_LIMIT_READ
]
168 || io_limits
->iops
[BLOCK_IO_LIMIT_WRITE
]
169 || io_limits
->iops
[BLOCK_IO_LIMIT_TOTAL
];
172 static void bdrv_io_limits_intercept(BlockDriverState
*bs
,
173 bool is_write
, int nb_sectors
)
175 int64_t wait_time
= -1;
177 if (!qemu_co_queue_empty(&bs
->throttled_reqs
)) {
178 qemu_co_queue_wait(&bs
->throttled_reqs
);
181 /* In fact, we hope to keep each request's timing, in FIFO mode. The next
182 * throttled requests will not be dequeued until the current request is
183 * allowed to be serviced. So if the current request still exceeds the
184 * limits, it will be inserted to the head. All requests followed it will
185 * be still in throttled_reqs queue.
188 while (bdrv_exceed_io_limits(bs
, nb_sectors
, is_write
, &wait_time
)) {
189 qemu_mod_timer(bs
->block_timer
,
190 wait_time
+ qemu_get_clock_ns(vm_clock
));
191 qemu_co_queue_wait_insert_head(&bs
->throttled_reqs
);
194 qemu_co_queue_next(&bs
->throttled_reqs
);
197 /* check if the path starts with "<protocol>:" */
198 static int path_has_protocol(const char *path
)
203 if (is_windows_drive(path
) ||
204 is_windows_drive_prefix(path
)) {
207 p
= path
+ strcspn(path
, ":/\\");
209 p
= path
+ strcspn(path
, ":/");
215 int path_is_absolute(const char *path
)
218 /* specific case for names like: "\\.\d:" */
219 if (is_windows_drive(path
) || is_windows_drive_prefix(path
)) {
222 return (*path
== '/' || *path
== '\\');
224 return (*path
== '/');
228 /* if filename is absolute, just copy it to dest. Otherwise, build a
229 path to it by considering it is relative to base_path. URL are
231 void path_combine(char *dest
, int dest_size
,
232 const char *base_path
,
233 const char *filename
)
240 if (path_is_absolute(filename
)) {
241 pstrcpy(dest
, dest_size
, filename
);
243 p
= strchr(base_path
, ':');
248 p1
= strrchr(base_path
, '/');
252 p2
= strrchr(base_path
, '\\');
264 if (len
> dest_size
- 1)
266 memcpy(dest
, base_path
, len
);
268 pstrcat(dest
, dest_size
, filename
);
272 void bdrv_get_full_backing_filename(BlockDriverState
*bs
, char *dest
, size_t sz
)
274 if (bs
->backing_file
[0] == '\0' || path_has_protocol(bs
->backing_file
)) {
275 pstrcpy(dest
, sz
, bs
->backing_file
);
277 path_combine(dest
, sz
, bs
->filename
, bs
->backing_file
);
281 void bdrv_register(BlockDriver
*bdrv
)
283 /* Block drivers without coroutine functions need emulation */
284 if (!bdrv
->bdrv_co_readv
) {
285 bdrv
->bdrv_co_readv
= bdrv_co_readv_em
;
286 bdrv
->bdrv_co_writev
= bdrv_co_writev_em
;
288 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
289 * the block driver lacks aio we need to emulate that too.
291 if (!bdrv
->bdrv_aio_readv
) {
292 /* add AIO emulation layer */
293 bdrv
->bdrv_aio_readv
= bdrv_aio_readv_em
;
294 bdrv
->bdrv_aio_writev
= bdrv_aio_writev_em
;
298 QLIST_INSERT_HEAD(&bdrv_drivers
, bdrv
, list
);
301 /* create a new block device (by default it is empty) */
302 BlockDriverState
*bdrv_new(const char *device_name
)
304 BlockDriverState
*bs
;
306 bs
= g_malloc0(sizeof(BlockDriverState
));
307 pstrcpy(bs
->device_name
, sizeof(bs
->device_name
), device_name
);
308 if (device_name
[0] != '\0') {
309 QTAILQ_INSERT_TAIL(&bdrv_states
, bs
, list
);
311 bdrv_iostatus_disable(bs
);
312 notifier_list_init(&bs
->close_notifiers
);
317 void bdrv_add_close_notifier(BlockDriverState
*bs
, Notifier
*notify
)
319 notifier_list_add(&bs
->close_notifiers
, notify
);
322 BlockDriver
*bdrv_find_format(const char *format_name
)
325 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
326 if (!strcmp(drv1
->format_name
, format_name
)) {
333 static int bdrv_is_whitelisted(BlockDriver
*drv
)
335 static const char *whitelist
[] = {
336 CONFIG_BDRV_WHITELIST
341 return 1; /* no whitelist, anything goes */
343 for (p
= whitelist
; *p
; p
++) {
344 if (!strcmp(drv
->format_name
, *p
)) {
351 BlockDriver
*bdrv_find_whitelisted_format(const char *format_name
)
353 BlockDriver
*drv
= bdrv_find_format(format_name
);
354 return drv
&& bdrv_is_whitelisted(drv
) ? drv
: NULL
;
357 typedef struct CreateCo
{
360 QEMUOptionParameter
*options
;
364 static void coroutine_fn
bdrv_create_co_entry(void *opaque
)
366 CreateCo
*cco
= opaque
;
369 cco
->ret
= cco
->drv
->bdrv_create(cco
->filename
, cco
->options
);
372 int bdrv_create(BlockDriver
*drv
, const char* filename
,
373 QEMUOptionParameter
*options
)
380 .filename
= g_strdup(filename
),
385 if (!drv
->bdrv_create
) {
390 if (qemu_in_coroutine()) {
391 /* Fast-path if already in coroutine context */
392 bdrv_create_co_entry(&cco
);
394 co
= qemu_coroutine_create(bdrv_create_co_entry
);
395 qemu_coroutine_enter(co
, &cco
);
396 while (cco
.ret
== NOT_DONE
) {
404 g_free(cco
.filename
);
408 int bdrv_create_file(const char* filename
, QEMUOptionParameter
*options
)
412 drv
= bdrv_find_protocol(filename
);
417 return bdrv_create(drv
, filename
, options
);
421 * Create a uniquely-named empty temporary file.
422 * Return 0 upon success, otherwise a negative errno value.
424 int get_tmp_filename(char *filename
, int size
)
427 char temp_dir
[MAX_PATH
];
428 /* GetTempFileName requires that its output buffer (4th param)
429 have length MAX_PATH or greater. */
430 assert(size
>= MAX_PATH
);
431 return (GetTempPath(MAX_PATH
, temp_dir
)
432 && GetTempFileName(temp_dir
, "qem", 0, filename
)
433 ? 0 : -GetLastError());
437 tmpdir
= getenv("TMPDIR");
440 if (snprintf(filename
, size
, "%s/vl.XXXXXX", tmpdir
) >= size
) {
443 fd
= mkstemp(filename
);
447 if (close(fd
) != 0) {
456 * Detect host devices. By convention, /dev/cdrom[N] is always
457 * recognized as a host CDROM.
459 static BlockDriver
*find_hdev_driver(const char *filename
)
461 int score_max
= 0, score
;
462 BlockDriver
*drv
= NULL
, *d
;
464 QLIST_FOREACH(d
, &bdrv_drivers
, list
) {
465 if (d
->bdrv_probe_device
) {
466 score
= d
->bdrv_probe_device(filename
);
467 if (score
> score_max
) {
477 BlockDriver
*bdrv_find_protocol(const char *filename
)
484 /* TODO Drivers without bdrv_file_open must be specified explicitly */
487 * XXX(hch): we really should not let host device detection
488 * override an explicit protocol specification, but moving this
489 * later breaks access to device names with colons in them.
490 * Thanks to the brain-dead persistent naming schemes on udev-
491 * based Linux systems those actually are quite common.
493 drv1
= find_hdev_driver(filename
);
498 if (!path_has_protocol(filename
)) {
499 return bdrv_find_format("file");
501 p
= strchr(filename
, ':');
504 if (len
> sizeof(protocol
) - 1)
505 len
= sizeof(protocol
) - 1;
506 memcpy(protocol
, filename
, len
);
507 protocol
[len
] = '\0';
508 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
509 if (drv1
->protocol_name
&&
510 !strcmp(drv1
->protocol_name
, protocol
)) {
517 static int find_image_format(BlockDriverState
*bs
, const char *filename
,
520 int score
, score_max
;
521 BlockDriver
*drv1
, *drv
;
525 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
526 if (bs
->sg
|| !bdrv_is_inserted(bs
) || bdrv_getlength(bs
) == 0) {
527 drv
= bdrv_find_format("raw");
535 ret
= bdrv_pread(bs
, 0, buf
, sizeof(buf
));
543 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
544 if (drv1
->bdrv_probe
) {
545 score
= drv1
->bdrv_probe(buf
, ret
, filename
);
546 if (score
> score_max
) {
560 * Set the current 'total_sectors' value
562 static int refresh_total_sectors(BlockDriverState
*bs
, int64_t hint
)
564 BlockDriver
*drv
= bs
->drv
;
566 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
570 /* query actual device if possible, otherwise just trust the hint */
571 if (drv
->bdrv_getlength
) {
572 int64_t length
= drv
->bdrv_getlength(bs
);
576 hint
= length
>> BDRV_SECTOR_BITS
;
579 bs
->total_sectors
= hint
;
584 * Set open flags for a given cache mode
586 * Return 0 on success, -1 if the cache mode was invalid.
588 int bdrv_parse_cache_flags(const char *mode
, int *flags
)
590 *flags
&= ~BDRV_O_CACHE_MASK
;
592 if (!strcmp(mode
, "off") || !strcmp(mode
, "none")) {
593 *flags
|= BDRV_O_NOCACHE
| BDRV_O_CACHE_WB
;
594 } else if (!strcmp(mode
, "directsync")) {
595 *flags
|= BDRV_O_NOCACHE
;
596 } else if (!strcmp(mode
, "writeback")) {
597 *flags
|= BDRV_O_CACHE_WB
;
598 } else if (!strcmp(mode
, "unsafe")) {
599 *flags
|= BDRV_O_CACHE_WB
;
600 *flags
|= BDRV_O_NO_FLUSH
;
601 } else if (!strcmp(mode
, "writethrough")) {
602 /* this is the default */
611 * The copy-on-read flag is actually a reference count so multiple users may
612 * use the feature without worrying about clobbering its previous state.
613 * Copy-on-read stays enabled until all users have called to disable it.
615 void bdrv_enable_copy_on_read(BlockDriverState
*bs
)
620 void bdrv_disable_copy_on_read(BlockDriverState
*bs
)
622 assert(bs
->copy_on_read
> 0);
626 static int bdrv_open_flags(BlockDriverState
*bs
, int flags
)
628 int open_flags
= flags
| BDRV_O_CACHE_WB
;
631 * Clear flags that are internal to the block layer before opening the
634 open_flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
637 * Snapshots should be writable.
639 if (bs
->is_temporary
) {
640 open_flags
|= BDRV_O_RDWR
;
647 * Common part for opening disk images and files
649 static int bdrv_open_common(BlockDriverState
*bs
, BlockDriverState
*file
,
650 const char *filename
,
651 int flags
, BlockDriver
*drv
)
656 assert(bs
->file
== NULL
);
658 trace_bdrv_open_common(bs
, filename
, flags
, drv
->format_name
);
660 bs
->open_flags
= flags
;
661 bs
->buffer_alignment
= 512;
663 assert(bs
->copy_on_read
== 0); /* bdrv_new() and bdrv_close() make it so */
664 if ((flags
& BDRV_O_RDWR
) && (flags
& BDRV_O_COPY_ON_READ
)) {
665 bdrv_enable_copy_on_read(bs
);
668 pstrcpy(bs
->filename
, sizeof(bs
->filename
), filename
);
670 if (use_bdrv_whitelist
&& !bdrv_is_whitelisted(drv
)) {
675 bs
->opaque
= g_malloc0(drv
->instance_size
);
677 bs
->enable_write_cache
= !!(flags
& BDRV_O_CACHE_WB
);
678 open_flags
= bdrv_open_flags(bs
, flags
);
680 bs
->read_only
= !(open_flags
& BDRV_O_RDWR
);
682 /* Open the image, either directly or using a protocol */
683 if (drv
->bdrv_file_open
) {
688 ret
= drv
->bdrv_file_open(bs
, filename
, open_flags
);
691 assert(file
!= NULL
);
693 ret
= drv
->bdrv_open(bs
, open_flags
);
700 ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
706 if (bs
->is_temporary
) {
721 * Opens a file using a protocol (file, host_device, nbd, ...)
723 int bdrv_file_open(BlockDriverState
**pbs
, const char *filename
, int flags
)
725 BlockDriverState
*bs
;
729 drv
= bdrv_find_protocol(filename
);
735 ret
= bdrv_open_common(bs
, NULL
, filename
, flags
, drv
);
745 int bdrv_open_backing_file(BlockDriverState
*bs
)
747 char backing_filename
[PATH_MAX
];
749 BlockDriver
*back_drv
= NULL
;
751 if (bs
->backing_hd
!= NULL
) {
755 bs
->open_flags
&= ~BDRV_O_NO_BACKING
;
756 if (bs
->backing_file
[0] == '\0') {
760 bs
->backing_hd
= bdrv_new("");
761 bdrv_get_full_backing_filename(bs
, backing_filename
,
762 sizeof(backing_filename
));
764 if (bs
->backing_format
[0] != '\0') {
765 back_drv
= bdrv_find_format(bs
->backing_format
);
768 /* backing files always opened read-only */
769 back_flags
= bs
->open_flags
& ~(BDRV_O_RDWR
| BDRV_O_SNAPSHOT
);
771 ret
= bdrv_open(bs
->backing_hd
, backing_filename
, back_flags
, back_drv
);
773 bdrv_delete(bs
->backing_hd
);
774 bs
->backing_hd
= NULL
;
775 bs
->open_flags
|= BDRV_O_NO_BACKING
;
782 * Opens a disk image (raw, qcow2, vmdk, ...)
784 int bdrv_open(BlockDriverState
*bs
, const char *filename
, int flags
,
788 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
789 char tmp_filename
[PATH_MAX
+ 1];
790 BlockDriverState
*file
= NULL
;
792 if (flags
& BDRV_O_SNAPSHOT
) {
793 BlockDriverState
*bs1
;
796 BlockDriver
*bdrv_qcow2
;
797 QEMUOptionParameter
*options
;
798 char backing_filename
[PATH_MAX
];
800 /* if snapshot, we create a temporary backing file and open it
801 instead of opening 'filename' directly */
803 /* if there is a backing file, use it */
805 ret
= bdrv_open(bs1
, filename
, 0, drv
);
810 total_size
= bdrv_getlength(bs1
) & BDRV_SECTOR_MASK
;
812 if (bs1
->drv
&& bs1
->drv
->protocol_name
)
817 ret
= get_tmp_filename(tmp_filename
, sizeof(tmp_filename
));
822 /* Real path is meaningless for protocols */
824 snprintf(backing_filename
, sizeof(backing_filename
),
826 else if (!realpath(filename
, backing_filename
))
829 bdrv_qcow2
= bdrv_find_format("qcow2");
830 options
= parse_option_parameters("", bdrv_qcow2
->create_options
, NULL
);
832 set_option_parameter_int(options
, BLOCK_OPT_SIZE
, total_size
);
833 set_option_parameter(options
, BLOCK_OPT_BACKING_FILE
, backing_filename
);
835 set_option_parameter(options
, BLOCK_OPT_BACKING_FMT
,
839 ret
= bdrv_create(bdrv_qcow2
, tmp_filename
, options
);
840 free_option_parameters(options
);
845 filename
= tmp_filename
;
847 bs
->is_temporary
= 1;
850 /* Open image file without format layer */
851 if (flags
& BDRV_O_RDWR
) {
852 flags
|= BDRV_O_ALLOW_RDWR
;
855 ret
= bdrv_file_open(&file
, filename
, bdrv_open_flags(bs
, flags
));
860 /* Find the right image format driver */
862 ret
= find_image_format(file
, filename
, &drv
);
866 goto unlink_and_fail
;
870 ret
= bdrv_open_common(bs
, file
, filename
, flags
, drv
);
872 goto unlink_and_fail
;
875 if (bs
->file
!= file
) {
880 /* If there is a backing file, use it */
881 if ((flags
& BDRV_O_NO_BACKING
) == 0) {
882 ret
= bdrv_open_backing_file(bs
);
889 if (!bdrv_key_required(bs
)) {
890 bdrv_dev_change_media_cb(bs
, true);
893 /* throttling disk I/O limits */
894 if (bs
->io_limits_enabled
) {
895 bdrv_io_limits_enable(bs
);
904 if (bs
->is_temporary
) {
910 typedef struct BlockReopenQueueEntry
{
912 BDRVReopenState state
;
913 QSIMPLEQ_ENTRY(BlockReopenQueueEntry
) entry
;
914 } BlockReopenQueueEntry
;
917 * Adds a BlockDriverState to a simple queue for an atomic, transactional
918 * reopen of multiple devices.
920 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
921 * already performed, or alternatively may be NULL a new BlockReopenQueue will
922 * be created and initialized. This newly created BlockReopenQueue should be
923 * passed back in for subsequent calls that are intended to be of the same
926 * bs is the BlockDriverState to add to the reopen queue.
928 * flags contains the open flags for the associated bs
930 * returns a pointer to bs_queue, which is either the newly allocated
931 * bs_queue, or the existing bs_queue being used.
934 BlockReopenQueue
*bdrv_reopen_queue(BlockReopenQueue
*bs_queue
,
935 BlockDriverState
*bs
, int flags
)
939 BlockReopenQueueEntry
*bs_entry
;
940 if (bs_queue
== NULL
) {
941 bs_queue
= g_new0(BlockReopenQueue
, 1);
942 QSIMPLEQ_INIT(bs_queue
);
946 bdrv_reopen_queue(bs_queue
, bs
->file
, flags
);
949 bs_entry
= g_new0(BlockReopenQueueEntry
, 1);
950 QSIMPLEQ_INSERT_TAIL(bs_queue
, bs_entry
, entry
);
952 bs_entry
->state
.bs
= bs
;
953 bs_entry
->state
.flags
= flags
;
959 * Reopen multiple BlockDriverStates atomically & transactionally.
961 * The queue passed in (bs_queue) must have been built up previous
962 * via bdrv_reopen_queue().
964 * Reopens all BDS specified in the queue, with the appropriate
965 * flags. All devices are prepared for reopen, and failure of any
966 * device will cause all device changes to be abandonded, and intermediate
969 * If all devices prepare successfully, then the changes are committed
973 int bdrv_reopen_multiple(BlockReopenQueue
*bs_queue
, Error
**errp
)
976 BlockReopenQueueEntry
*bs_entry
, *next
;
977 Error
*local_err
= NULL
;
979 assert(bs_queue
!= NULL
);
983 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
984 if (bdrv_reopen_prepare(&bs_entry
->state
, bs_queue
, &local_err
)) {
985 error_propagate(errp
, local_err
);
988 bs_entry
->prepared
= true;
991 /* If we reach this point, we have success and just need to apply the
994 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
995 bdrv_reopen_commit(&bs_entry
->state
);
1001 QSIMPLEQ_FOREACH_SAFE(bs_entry
, bs_queue
, entry
, next
) {
1002 if (ret
&& bs_entry
->prepared
) {
1003 bdrv_reopen_abort(&bs_entry
->state
);
1012 /* Reopen a single BlockDriverState with the specified flags. */
1013 int bdrv_reopen(BlockDriverState
*bs
, int bdrv_flags
, Error
**errp
)
1016 Error
*local_err
= NULL
;
1017 BlockReopenQueue
*queue
= bdrv_reopen_queue(NULL
, bs
, bdrv_flags
);
1019 ret
= bdrv_reopen_multiple(queue
, &local_err
);
1020 if (local_err
!= NULL
) {
1021 error_propagate(errp
, local_err
);
1028 * Prepares a BlockDriverState for reopen. All changes are staged in the
1029 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1030 * the block driver layer .bdrv_reopen_prepare()
1032 * bs is the BlockDriverState to reopen
1033 * flags are the new open flags
1034 * queue is the reopen queue
1036 * Returns 0 on success, non-zero on error. On error errp will be set
1039 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1040 * It is the responsibility of the caller to then call the abort() or
1041 * commit() for any other BDS that have been left in a prepare() state
1044 int bdrv_reopen_prepare(BDRVReopenState
*reopen_state
, BlockReopenQueue
*queue
,
1048 Error
*local_err
= NULL
;
1051 assert(reopen_state
!= NULL
);
1052 assert(reopen_state
->bs
->drv
!= NULL
);
1053 drv
= reopen_state
->bs
->drv
;
1055 /* if we are to stay read-only, do not allow permission change
1057 if (!(reopen_state
->bs
->open_flags
& BDRV_O_ALLOW_RDWR
) &&
1058 reopen_state
->flags
& BDRV_O_RDWR
) {
1059 error_set(errp
, QERR_DEVICE_IS_READ_ONLY
,
1060 reopen_state
->bs
->device_name
);
1065 ret
= bdrv_flush(reopen_state
->bs
);
1067 error_set(errp
, ERROR_CLASS_GENERIC_ERROR
, "Error (%s) flushing drive",
1072 if (drv
->bdrv_reopen_prepare
) {
1073 ret
= drv
->bdrv_reopen_prepare(reopen_state
, queue
, &local_err
);
1075 if (local_err
!= NULL
) {
1076 error_propagate(errp
, local_err
);
1078 error_set(errp
, QERR_OPEN_FILE_FAILED
,
1079 reopen_state
->bs
->filename
);
1084 /* It is currently mandatory to have a bdrv_reopen_prepare()
1085 * handler for each supported drv. */
1086 error_set(errp
, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED
,
1087 drv
->format_name
, reopen_state
->bs
->device_name
,
1088 "reopening of file");
1100 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1101 * makes them final by swapping the staging BlockDriverState contents into
1102 * the active BlockDriverState contents.
1104 void bdrv_reopen_commit(BDRVReopenState
*reopen_state
)
1108 assert(reopen_state
!= NULL
);
1109 drv
= reopen_state
->bs
->drv
;
1110 assert(drv
!= NULL
);
1112 /* If there are any driver level actions to take */
1113 if (drv
->bdrv_reopen_commit
) {
1114 drv
->bdrv_reopen_commit(reopen_state
);
1117 /* set BDS specific flags now */
1118 reopen_state
->bs
->open_flags
= reopen_state
->flags
;
1119 reopen_state
->bs
->enable_write_cache
= !!(reopen_state
->flags
&
1121 reopen_state
->bs
->read_only
= !(reopen_state
->flags
& BDRV_O_RDWR
);
1125 * Abort the reopen, and delete and free the staged changes in
1128 void bdrv_reopen_abort(BDRVReopenState
*reopen_state
)
1132 assert(reopen_state
!= NULL
);
1133 drv
= reopen_state
->bs
->drv
;
1134 assert(drv
!= NULL
);
1136 if (drv
->bdrv_reopen_abort
) {
1137 drv
->bdrv_reopen_abort(reopen_state
);
1142 void bdrv_close(BlockDriverState
*bs
)
1146 block_job_cancel_sync(bs
->job
);
1149 notifier_list_notify(&bs
->close_notifiers
, bs
);
1152 if (bs
== bs_snapshots
) {
1153 bs_snapshots
= NULL
;
1155 if (bs
->backing_hd
) {
1156 bdrv_delete(bs
->backing_hd
);
1157 bs
->backing_hd
= NULL
;
1159 bs
->drv
->bdrv_close(bs
);
1162 if (bs
->is_temporary
) {
1163 unlink(bs
->filename
);
1168 bs
->copy_on_read
= 0;
1169 bs
->backing_file
[0] = '\0';
1170 bs
->backing_format
[0] = '\0';
1171 bs
->total_sectors
= 0;
1177 if (bs
->file
!= NULL
) {
1178 bdrv_delete(bs
->file
);
1183 bdrv_dev_change_media_cb(bs
, false);
1185 /*throttling disk I/O limits*/
1186 if (bs
->io_limits_enabled
) {
1187 bdrv_io_limits_disable(bs
);
1191 void bdrv_close_all(void)
1193 BlockDriverState
*bs
;
1195 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1201 * Wait for pending requests to complete across all BlockDriverStates
1203 * This function does not flush data to disk, use bdrv_flush_all() for that
1204 * after calling this function.
1206 * Note that completion of an asynchronous I/O operation can trigger any
1207 * number of other I/O operations on other devices---for example a coroutine
1208 * can be arbitrarily complex and a constant flow of I/O can come until the
1209 * coroutine is complete. Because of this, it is not possible to have a
1210 * function to drain a single device's I/O queue.
1212 void bdrv_drain_all(void)
1214 BlockDriverState
*bs
;
1218 busy
= qemu_aio_wait();
1220 /* FIXME: We do not have timer support here, so this is effectively
1223 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1224 if (!qemu_co_queue_empty(&bs
->throttled_reqs
)) {
1225 qemu_co_queue_restart_all(&bs
->throttled_reqs
);
1231 /* If requests are still pending there is a bug somewhere */
1232 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1233 assert(QLIST_EMPTY(&bs
->tracked_requests
));
1234 assert(qemu_co_queue_empty(&bs
->throttled_reqs
));
1238 /* make a BlockDriverState anonymous by removing from bdrv_state list.
1239 Also, NULL terminate the device_name to prevent double remove */
1240 void bdrv_make_anon(BlockDriverState
*bs
)
1242 if (bs
->device_name
[0] != '\0') {
1243 QTAILQ_REMOVE(&bdrv_states
, bs
, list
);
1245 bs
->device_name
[0] = '\0';
1248 static void bdrv_rebind(BlockDriverState
*bs
)
1250 if (bs
->drv
&& bs
->drv
->bdrv_rebind
) {
1251 bs
->drv
->bdrv_rebind(bs
);
1255 static void bdrv_move_feature_fields(BlockDriverState
*bs_dest
,
1256 BlockDriverState
*bs_src
)
1258 /* move some fields that need to stay attached to the device */
1259 bs_dest
->open_flags
= bs_src
->open_flags
;
1262 bs_dest
->dev_ops
= bs_src
->dev_ops
;
1263 bs_dest
->dev_opaque
= bs_src
->dev_opaque
;
1264 bs_dest
->dev
= bs_src
->dev
;
1265 bs_dest
->buffer_alignment
= bs_src
->buffer_alignment
;
1266 bs_dest
->copy_on_read
= bs_src
->copy_on_read
;
1268 bs_dest
->enable_write_cache
= bs_src
->enable_write_cache
;
1270 /* i/o timing parameters */
1271 bs_dest
->slice_time
= bs_src
->slice_time
;
1272 bs_dest
->slice_start
= bs_src
->slice_start
;
1273 bs_dest
->slice_end
= bs_src
->slice_end
;
1274 bs_dest
->io_limits
= bs_src
->io_limits
;
1275 bs_dest
->io_base
= bs_src
->io_base
;
1276 bs_dest
->throttled_reqs
= bs_src
->throttled_reqs
;
1277 bs_dest
->block_timer
= bs_src
->block_timer
;
1278 bs_dest
->io_limits_enabled
= bs_src
->io_limits_enabled
;
1281 bs_dest
->on_read_error
= bs_src
->on_read_error
;
1282 bs_dest
->on_write_error
= bs_src
->on_write_error
;
1285 bs_dest
->iostatus_enabled
= bs_src
->iostatus_enabled
;
1286 bs_dest
->iostatus
= bs_src
->iostatus
;
1289 bs_dest
->dirty_bitmap
= bs_src
->dirty_bitmap
;
1292 bs_dest
->in_use
= bs_src
->in_use
;
1293 bs_dest
->job
= bs_src
->job
;
1295 /* keep the same entry in bdrv_states */
1296 pstrcpy(bs_dest
->device_name
, sizeof(bs_dest
->device_name
),
1297 bs_src
->device_name
);
1298 bs_dest
->list
= bs_src
->list
;
1302 * Swap bs contents for two image chains while they are live,
1303 * while keeping required fields on the BlockDriverState that is
1304 * actually attached to a device.
1306 * This will modify the BlockDriverState fields, and swap contents
1307 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1309 * bs_new is required to be anonymous.
1311 * This function does not create any image files.
1313 void bdrv_swap(BlockDriverState
*bs_new
, BlockDriverState
*bs_old
)
1315 BlockDriverState tmp
;
1317 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
1318 assert(bs_new
->device_name
[0] == '\0');
1319 assert(bs_new
->dirty_bitmap
== NULL
);
1320 assert(bs_new
->job
== NULL
);
1321 assert(bs_new
->dev
== NULL
);
1322 assert(bs_new
->in_use
== 0);
1323 assert(bs_new
->io_limits_enabled
== false);
1324 assert(bs_new
->block_timer
== NULL
);
1330 /* there are some fields that should not be swapped, move them back */
1331 bdrv_move_feature_fields(&tmp
, bs_old
);
1332 bdrv_move_feature_fields(bs_old
, bs_new
);
1333 bdrv_move_feature_fields(bs_new
, &tmp
);
1335 /* bs_new shouldn't be in bdrv_states even after the swap! */
1336 assert(bs_new
->device_name
[0] == '\0');
1338 /* Check a few fields that should remain attached to the device */
1339 assert(bs_new
->dev
== NULL
);
1340 assert(bs_new
->job
== NULL
);
1341 assert(bs_new
->in_use
== 0);
1342 assert(bs_new
->io_limits_enabled
== false);
1343 assert(bs_new
->block_timer
== NULL
);
1345 bdrv_rebind(bs_new
);
1346 bdrv_rebind(bs_old
);
1350 * Add new bs contents at the top of an image chain while the chain is
1351 * live, while keeping required fields on the top layer.
1353 * This will modify the BlockDriverState fields, and swap contents
1354 * between bs_new and bs_top. Both bs_new and bs_top are modified.
1356 * bs_new is required to be anonymous.
1358 * This function does not create any image files.
1360 void bdrv_append(BlockDriverState
*bs_new
, BlockDriverState
*bs_top
)
1362 bdrv_swap(bs_new
, bs_top
);
1364 /* The contents of 'tmp' will become bs_top, as we are
1365 * swapping bs_new and bs_top contents. */
1366 bs_top
->backing_hd
= bs_new
;
1367 bs_top
->open_flags
&= ~BDRV_O_NO_BACKING
;
1368 pstrcpy(bs_top
->backing_file
, sizeof(bs_top
->backing_file
),
1370 pstrcpy(bs_top
->backing_format
, sizeof(bs_top
->backing_format
),
1371 bs_new
->drv
? bs_new
->drv
->format_name
: "");
1374 void bdrv_delete(BlockDriverState
*bs
)
1378 assert(!bs
->in_use
);
1380 /* remove from list, if necessary */
1385 assert(bs
!= bs_snapshots
);
1389 int bdrv_attach_dev(BlockDriverState
*bs
, void *dev
)
1390 /* TODO change to DeviceState *dev when all users are qdevified */
1396 bdrv_iostatus_reset(bs
);
1400 /* TODO qdevified devices don't use this, remove when devices are qdevified */
1401 void bdrv_attach_dev_nofail(BlockDriverState
*bs
, void *dev
)
1403 if (bdrv_attach_dev(bs
, dev
) < 0) {
1408 void bdrv_detach_dev(BlockDriverState
*bs
, void *dev
)
1409 /* TODO change to DeviceState *dev when all users are qdevified */
1411 assert(bs
->dev
== dev
);
1414 bs
->dev_opaque
= NULL
;
1415 bs
->buffer_alignment
= 512;
1418 /* TODO change to return DeviceState * when all users are qdevified */
1419 void *bdrv_get_attached_dev(BlockDriverState
*bs
)
1424 void bdrv_set_dev_ops(BlockDriverState
*bs
, const BlockDevOps
*ops
,
1428 bs
->dev_opaque
= opaque
;
1429 if (bdrv_dev_has_removable_media(bs
) && bs
== bs_snapshots
) {
1430 bs_snapshots
= NULL
;
1434 void bdrv_emit_qmp_error_event(const BlockDriverState
*bdrv
,
1435 enum MonitorEvent ev
,
1436 BlockErrorAction action
, bool is_read
)
1439 const char *action_str
;
1442 case BDRV_ACTION_REPORT
:
1443 action_str
= "report";
1445 case BDRV_ACTION_IGNORE
:
1446 action_str
= "ignore";
1448 case BDRV_ACTION_STOP
:
1449 action_str
= "stop";
1455 data
= qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
1458 is_read
? "read" : "write");
1459 monitor_protocol_event(ev
, data
);
1461 qobject_decref(data
);
1464 static void bdrv_emit_qmp_eject_event(BlockDriverState
*bs
, bool ejected
)
1468 data
= qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
1469 bdrv_get_device_name(bs
), ejected
);
1470 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED
, data
);
1472 qobject_decref(data
);
1475 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
)
1477 if (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
) {
1478 bool tray_was_closed
= !bdrv_dev_is_tray_open(bs
);
1479 bs
->dev_ops
->change_media_cb(bs
->dev_opaque
, load
);
1480 if (tray_was_closed
) {
1482 bdrv_emit_qmp_eject_event(bs
, true);
1486 bdrv_emit_qmp_eject_event(bs
, false);
1491 bool bdrv_dev_has_removable_media(BlockDriverState
*bs
)
1493 return !bs
->dev
|| (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
);
1496 void bdrv_dev_eject_request(BlockDriverState
*bs
, bool force
)
1498 if (bs
->dev_ops
&& bs
->dev_ops
->eject_request_cb
) {
1499 bs
->dev_ops
->eject_request_cb(bs
->dev_opaque
, force
);
1503 bool bdrv_dev_is_tray_open(BlockDriverState
*bs
)
1505 if (bs
->dev_ops
&& bs
->dev_ops
->is_tray_open
) {
1506 return bs
->dev_ops
->is_tray_open(bs
->dev_opaque
);
1511 static void bdrv_dev_resize_cb(BlockDriverState
*bs
)
1513 if (bs
->dev_ops
&& bs
->dev_ops
->resize_cb
) {
1514 bs
->dev_ops
->resize_cb(bs
->dev_opaque
);
1518 bool bdrv_dev_is_medium_locked(BlockDriverState
*bs
)
1520 if (bs
->dev_ops
&& bs
->dev_ops
->is_medium_locked
) {
1521 return bs
->dev_ops
->is_medium_locked(bs
->dev_opaque
);
1527 * Run consistency checks on an image
1529 * Returns 0 if the check could be completed (it doesn't mean that the image is
1530 * free of errors) or -errno when an internal error occurred. The results of the
1531 * check are stored in res.
1533 int bdrv_check(BlockDriverState
*bs
, BdrvCheckResult
*res
, BdrvCheckMode fix
)
1535 if (bs
->drv
->bdrv_check
== NULL
) {
1539 memset(res
, 0, sizeof(*res
));
1540 return bs
->drv
->bdrv_check(bs
, res
, fix
);
1543 #define COMMIT_BUF_SECTORS 2048
1545 /* commit COW file into the raw image */
1546 int bdrv_commit(BlockDriverState
*bs
)
1548 BlockDriver
*drv
= bs
->drv
;
1549 int64_t sector
, total_sectors
;
1550 int n
, ro
, open_flags
;
1553 char filename
[PATH_MAX
];
1558 if (!bs
->backing_hd
) {
1562 if (bdrv_in_use(bs
) || bdrv_in_use(bs
->backing_hd
)) {
1566 ro
= bs
->backing_hd
->read_only
;
1567 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
1568 pstrcpy(filename
, sizeof(filename
), bs
->backing_hd
->filename
);
1569 open_flags
= bs
->backing_hd
->open_flags
;
1572 if (bdrv_reopen(bs
->backing_hd
, open_flags
| BDRV_O_RDWR
, NULL
)) {
1577 total_sectors
= bdrv_getlength(bs
) >> BDRV_SECTOR_BITS
;
1578 buf
= g_malloc(COMMIT_BUF_SECTORS
* BDRV_SECTOR_SIZE
);
1580 for (sector
= 0; sector
< total_sectors
; sector
+= n
) {
1581 if (bdrv_is_allocated(bs
, sector
, COMMIT_BUF_SECTORS
, &n
)) {
1583 if (bdrv_read(bs
, sector
, buf
, n
) != 0) {
1588 if (bdrv_write(bs
->backing_hd
, sector
, buf
, n
) != 0) {
1595 if (drv
->bdrv_make_empty
) {
1596 ret
= drv
->bdrv_make_empty(bs
);
1601 * Make sure all data we wrote to the backing device is actually
1605 bdrv_flush(bs
->backing_hd
);
1611 /* ignoring error return here */
1612 bdrv_reopen(bs
->backing_hd
, open_flags
& ~BDRV_O_RDWR
, NULL
);
1618 int bdrv_commit_all(void)
1620 BlockDriverState
*bs
;
1622 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1623 int ret
= bdrv_commit(bs
);
1631 struct BdrvTrackedRequest
{
1632 BlockDriverState
*bs
;
1636 QLIST_ENTRY(BdrvTrackedRequest
) list
;
1637 Coroutine
*co
; /* owner, used for deadlock detection */
1638 CoQueue wait_queue
; /* coroutines blocked on this request */
1642 * Remove an active request from the tracked requests list
1644 * This function should be called when a tracked request is completing.
1646 static void tracked_request_end(BdrvTrackedRequest
*req
)
1648 QLIST_REMOVE(req
, list
);
1649 qemu_co_queue_restart_all(&req
->wait_queue
);
1653 * Add an active request to the tracked requests list
1655 static void tracked_request_begin(BdrvTrackedRequest
*req
,
1656 BlockDriverState
*bs
,
1658 int nb_sectors
, bool is_write
)
1660 *req
= (BdrvTrackedRequest
){
1662 .sector_num
= sector_num
,
1663 .nb_sectors
= nb_sectors
,
1664 .is_write
= is_write
,
1665 .co
= qemu_coroutine_self(),
1668 qemu_co_queue_init(&req
->wait_queue
);
1670 QLIST_INSERT_HEAD(&bs
->tracked_requests
, req
, list
);
1674 * Round a region to cluster boundaries
1676 void bdrv_round_to_clusters(BlockDriverState
*bs
,
1677 int64_t sector_num
, int nb_sectors
,
1678 int64_t *cluster_sector_num
,
1679 int *cluster_nb_sectors
)
1681 BlockDriverInfo bdi
;
1683 if (bdrv_get_info(bs
, &bdi
) < 0 || bdi
.cluster_size
== 0) {
1684 *cluster_sector_num
= sector_num
;
1685 *cluster_nb_sectors
= nb_sectors
;
1687 int64_t c
= bdi
.cluster_size
/ BDRV_SECTOR_SIZE
;
1688 *cluster_sector_num
= QEMU_ALIGN_DOWN(sector_num
, c
);
1689 *cluster_nb_sectors
= QEMU_ALIGN_UP(sector_num
- *cluster_sector_num
+
1694 static bool tracked_request_overlaps(BdrvTrackedRequest
*req
,
1695 int64_t sector_num
, int nb_sectors
) {
1697 if (sector_num
>= req
->sector_num
+ req
->nb_sectors
) {
1701 if (req
->sector_num
>= sector_num
+ nb_sectors
) {
1707 static void coroutine_fn
wait_for_overlapping_requests(BlockDriverState
*bs
,
1708 int64_t sector_num
, int nb_sectors
)
1710 BdrvTrackedRequest
*req
;
1711 int64_t cluster_sector_num
;
1712 int cluster_nb_sectors
;
1715 /* If we touch the same cluster it counts as an overlap. This guarantees
1716 * that allocating writes will be serialized and not race with each other
1717 * for the same cluster. For example, in copy-on-read it ensures that the
1718 * CoR read and write operations are atomic and guest writes cannot
1719 * interleave between them.
1721 bdrv_round_to_clusters(bs
, sector_num
, nb_sectors
,
1722 &cluster_sector_num
, &cluster_nb_sectors
);
1726 QLIST_FOREACH(req
, &bs
->tracked_requests
, list
) {
1727 if (tracked_request_overlaps(req
, cluster_sector_num
,
1728 cluster_nb_sectors
)) {
1729 /* Hitting this means there was a reentrant request, for
1730 * example, a block driver issuing nested requests. This must
1731 * never happen since it means deadlock.
1733 assert(qemu_coroutine_self() != req
->co
);
1735 qemu_co_queue_wait(&req
->wait_queue
);
1746 * -EINVAL - backing format specified, but no file
1747 * -ENOSPC - can't update the backing file because no space is left in the
1749 * -ENOTSUP - format driver doesn't support changing the backing file
1751 int bdrv_change_backing_file(BlockDriverState
*bs
,
1752 const char *backing_file
, const char *backing_fmt
)
1754 BlockDriver
*drv
= bs
->drv
;
1757 /* Backing file format doesn't make sense without a backing file */
1758 if (backing_fmt
&& !backing_file
) {
1762 if (drv
->bdrv_change_backing_file
!= NULL
) {
1763 ret
= drv
->bdrv_change_backing_file(bs
, backing_file
, backing_fmt
);
1769 pstrcpy(bs
->backing_file
, sizeof(bs
->backing_file
), backing_file
?: "");
1770 pstrcpy(bs
->backing_format
, sizeof(bs
->backing_format
), backing_fmt
?: "");
1776 * Finds the image layer in the chain that has 'bs' as its backing file.
1778 * active is the current topmost image.
1780 * Returns NULL if bs is not found in active's image chain,
1781 * or if active == bs.
1783 BlockDriverState
*bdrv_find_overlay(BlockDriverState
*active
,
1784 BlockDriverState
*bs
)
1786 BlockDriverState
*overlay
= NULL
;
1787 BlockDriverState
*intermediate
;
1789 assert(active
!= NULL
);
1792 /* if bs is the same as active, then by definition it has no overlay
1798 intermediate
= active
;
1799 while (intermediate
->backing_hd
) {
1800 if (intermediate
->backing_hd
== bs
) {
1801 overlay
= intermediate
;
1804 intermediate
= intermediate
->backing_hd
;
1810 typedef struct BlkIntermediateStates
{
1811 BlockDriverState
*bs
;
1812 QSIMPLEQ_ENTRY(BlkIntermediateStates
) entry
;
1813 } BlkIntermediateStates
;
1817 * Drops images above 'base' up to and including 'top', and sets the image
1818 * above 'top' to have base as its backing file.
1820 * Requires that the overlay to 'top' is opened r/w, so that the backing file
1821 * information in 'bs' can be properly updated.
1823 * E.g., this will convert the following chain:
1824 * bottom <- base <- intermediate <- top <- active
1828 * bottom <- base <- active
1830 * It is allowed for bottom==base, in which case it converts:
1832 * base <- intermediate <- top <- active
1839 * if active == top, that is considered an error
1842 int bdrv_drop_intermediate(BlockDriverState
*active
, BlockDriverState
*top
,
1843 BlockDriverState
*base
)
1845 BlockDriverState
*intermediate
;
1846 BlockDriverState
*base_bs
= NULL
;
1847 BlockDriverState
*new_top_bs
= NULL
;
1848 BlkIntermediateStates
*intermediate_state
, *next
;
1851 QSIMPLEQ_HEAD(states_to_delete
, BlkIntermediateStates
) states_to_delete
;
1852 QSIMPLEQ_INIT(&states_to_delete
);
1854 if (!top
->drv
|| !base
->drv
) {
1858 new_top_bs
= bdrv_find_overlay(active
, top
);
1860 if (new_top_bs
== NULL
) {
1861 /* we could not find the image above 'top', this is an error */
1865 /* special case of new_top_bs->backing_hd already pointing to base - nothing
1866 * to do, no intermediate images */
1867 if (new_top_bs
->backing_hd
== base
) {
1874 /* now we will go down through the list, and add each BDS we find
1875 * into our deletion queue, until we hit the 'base'
1877 while (intermediate
) {
1878 intermediate_state
= g_malloc0(sizeof(BlkIntermediateStates
));
1879 intermediate_state
->bs
= intermediate
;
1880 QSIMPLEQ_INSERT_TAIL(&states_to_delete
, intermediate_state
, entry
);
1882 if (intermediate
->backing_hd
== base
) {
1883 base_bs
= intermediate
->backing_hd
;
1886 intermediate
= intermediate
->backing_hd
;
1888 if (base_bs
== NULL
) {
1889 /* something went wrong, we did not end at the base. safely
1890 * unravel everything, and exit with error */
1894 /* success - we can delete the intermediate states, and link top->base */
1895 ret
= bdrv_change_backing_file(new_top_bs
, base_bs
->filename
,
1896 base_bs
->drv
? base_bs
->drv
->format_name
: "");
1900 new_top_bs
->backing_hd
= base_bs
;
1903 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
1904 /* so that bdrv_close() does not recursively close the chain */
1905 intermediate_state
->bs
->backing_hd
= NULL
;
1906 bdrv_delete(intermediate_state
->bs
);
1911 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
1912 g_free(intermediate_state
);
1918 static int bdrv_check_byte_request(BlockDriverState
*bs
, int64_t offset
,
1923 if (!bdrv_is_inserted(bs
))
1929 len
= bdrv_getlength(bs
);
1934 if ((offset
> len
) || (len
- offset
< size
))
1940 static int bdrv_check_request(BlockDriverState
*bs
, int64_t sector_num
,
1943 return bdrv_check_byte_request(bs
, sector_num
* BDRV_SECTOR_SIZE
,
1944 nb_sectors
* BDRV_SECTOR_SIZE
);
1947 typedef struct RwCo
{
1948 BlockDriverState
*bs
;
1956 static void coroutine_fn
bdrv_rw_co_entry(void *opaque
)
1958 RwCo
*rwco
= opaque
;
1960 if (!rwco
->is_write
) {
1961 rwco
->ret
= bdrv_co_do_readv(rwco
->bs
, rwco
->sector_num
,
1962 rwco
->nb_sectors
, rwco
->qiov
, 0);
1964 rwco
->ret
= bdrv_co_do_writev(rwco
->bs
, rwco
->sector_num
,
1965 rwco
->nb_sectors
, rwco
->qiov
, 0);
1970 * Process a synchronous request using coroutines
1972 static int bdrv_rw_co(BlockDriverState
*bs
, int64_t sector_num
, uint8_t *buf
,
1973 int nb_sectors
, bool is_write
)
1976 struct iovec iov
= {
1977 .iov_base
= (void *)buf
,
1978 .iov_len
= nb_sectors
* BDRV_SECTOR_SIZE
,
1983 .sector_num
= sector_num
,
1984 .nb_sectors
= nb_sectors
,
1986 .is_write
= is_write
,
1990 qemu_iovec_init_external(&qiov
, &iov
, 1);
1993 * In sync call context, when the vcpu is blocked, this throttling timer
1994 * will not fire; so the I/O throttling function has to be disabled here
1995 * if it has been enabled.
1997 if (bs
->io_limits_enabled
) {
1998 fprintf(stderr
, "Disabling I/O throttling on '%s' due "
1999 "to synchronous I/O.\n", bdrv_get_device_name(bs
));
2000 bdrv_io_limits_disable(bs
);
2003 if (qemu_in_coroutine()) {
2004 /* Fast-path if already in coroutine context */
2005 bdrv_rw_co_entry(&rwco
);
2007 co
= qemu_coroutine_create(bdrv_rw_co_entry
);
2008 qemu_coroutine_enter(co
, &rwco
);
2009 while (rwco
.ret
== NOT_DONE
) {
2016 /* return < 0 if error. See bdrv_write() for the return codes */
2017 int bdrv_read(BlockDriverState
*bs
, int64_t sector_num
,
2018 uint8_t *buf
, int nb_sectors
)
2020 return bdrv_rw_co(bs
, sector_num
, buf
, nb_sectors
, false);
2023 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2024 int bdrv_read_unthrottled(BlockDriverState
*bs
, int64_t sector_num
,
2025 uint8_t *buf
, int nb_sectors
)
2030 enabled
= bs
->io_limits_enabled
;
2031 bs
->io_limits_enabled
= false;
2032 ret
= bdrv_read(bs
, 0, buf
, 1);
2033 bs
->io_limits_enabled
= enabled
;
2037 /* Return < 0 if error. Important errors are:
2038 -EIO generic I/O error (may happen for all errors)
2039 -ENOMEDIUM No media inserted.
2040 -EINVAL Invalid sector number or nb_sectors
2041 -EACCES Trying to write a read-only device
2043 int bdrv_write(BlockDriverState
*bs
, int64_t sector_num
,
2044 const uint8_t *buf
, int nb_sectors
)
2046 return bdrv_rw_co(bs
, sector_num
, (uint8_t *)buf
, nb_sectors
, true);
2049 int bdrv_pread(BlockDriverState
*bs
, int64_t offset
,
2050 void *buf
, int count1
)
2052 uint8_t tmp_buf
[BDRV_SECTOR_SIZE
];
2053 int len
, nb_sectors
, count
;
2058 /* first read to align to sector start */
2059 len
= (BDRV_SECTOR_SIZE
- offset
) & (BDRV_SECTOR_SIZE
- 1);
2062 sector_num
= offset
>> BDRV_SECTOR_BITS
;
2064 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2066 memcpy(buf
, tmp_buf
+ (offset
& (BDRV_SECTOR_SIZE
- 1)), len
);
2074 /* read the sectors "in place" */
2075 nb_sectors
= count
>> BDRV_SECTOR_BITS
;
2076 if (nb_sectors
> 0) {
2077 if ((ret
= bdrv_read(bs
, sector_num
, buf
, nb_sectors
)) < 0)
2079 sector_num
+= nb_sectors
;
2080 len
= nb_sectors
<< BDRV_SECTOR_BITS
;
2085 /* add data from the last sector */
2087 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2089 memcpy(buf
, tmp_buf
, count
);
2094 int bdrv_pwrite(BlockDriverState
*bs
, int64_t offset
,
2095 const void *buf
, int count1
)
2097 uint8_t tmp_buf
[BDRV_SECTOR_SIZE
];
2098 int len
, nb_sectors
, count
;
2103 /* first write to align to sector start */
2104 len
= (BDRV_SECTOR_SIZE
- offset
) & (BDRV_SECTOR_SIZE
- 1);
2107 sector_num
= offset
>> BDRV_SECTOR_BITS
;
2109 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2111 memcpy(tmp_buf
+ (offset
& (BDRV_SECTOR_SIZE
- 1)), buf
, len
);
2112 if ((ret
= bdrv_write(bs
, sector_num
, tmp_buf
, 1)) < 0)
2121 /* write the sectors "in place" */
2122 nb_sectors
= count
>> BDRV_SECTOR_BITS
;
2123 if (nb_sectors
> 0) {
2124 if ((ret
= bdrv_write(bs
, sector_num
, buf
, nb_sectors
)) < 0)
2126 sector_num
+= nb_sectors
;
2127 len
= nb_sectors
<< BDRV_SECTOR_BITS
;
2132 /* add data from the last sector */
2134 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2136 memcpy(tmp_buf
, buf
, count
);
2137 if ((ret
= bdrv_write(bs
, sector_num
, tmp_buf
, 1)) < 0)
2144 * Writes to the file and ensures that no writes are reordered across this
2145 * request (acts as a barrier)
2147 * Returns 0 on success, -errno in error cases.
2149 int bdrv_pwrite_sync(BlockDriverState
*bs
, int64_t offset
,
2150 const void *buf
, int count
)
2154 ret
= bdrv_pwrite(bs
, offset
, buf
, count
);
2159 /* No flush needed for cache modes that already do it */
2160 if (bs
->enable_write_cache
) {
2167 static int coroutine_fn
bdrv_co_do_copy_on_readv(BlockDriverState
*bs
,
2168 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
2170 /* Perform I/O through a temporary buffer so that users who scribble over
2171 * their read buffer while the operation is in progress do not end up
2172 * modifying the image file. This is critical for zero-copy guest I/O
2173 * where anything might happen inside guest memory.
2175 void *bounce_buffer
;
2177 BlockDriver
*drv
= bs
->drv
;
2179 QEMUIOVector bounce_qiov
;
2180 int64_t cluster_sector_num
;
2181 int cluster_nb_sectors
;
2185 /* Cover entire cluster so no additional backing file I/O is required when
2186 * allocating cluster in the image file.
2188 bdrv_round_to_clusters(bs
, sector_num
, nb_sectors
,
2189 &cluster_sector_num
, &cluster_nb_sectors
);
2191 trace_bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
,
2192 cluster_sector_num
, cluster_nb_sectors
);
2194 iov
.iov_len
= cluster_nb_sectors
* BDRV_SECTOR_SIZE
;
2195 iov
.iov_base
= bounce_buffer
= qemu_blockalign(bs
, iov
.iov_len
);
2196 qemu_iovec_init_external(&bounce_qiov
, &iov
, 1);
2198 ret
= drv
->bdrv_co_readv(bs
, cluster_sector_num
, cluster_nb_sectors
,
2204 if (drv
->bdrv_co_write_zeroes
&&
2205 buffer_is_zero(bounce_buffer
, iov
.iov_len
)) {
2206 ret
= bdrv_co_do_write_zeroes(bs
, cluster_sector_num
,
2207 cluster_nb_sectors
);
2209 /* This does not change the data on the disk, it is not necessary
2210 * to flush even in cache=writethrough mode.
2212 ret
= drv
->bdrv_co_writev(bs
, cluster_sector_num
, cluster_nb_sectors
,
2217 /* It might be okay to ignore write errors for guest requests. If this
2218 * is a deliberate copy-on-read then we don't want to ignore the error.
2219 * Simply report it in all cases.
2224 skip_bytes
= (sector_num
- cluster_sector_num
) * BDRV_SECTOR_SIZE
;
2225 qemu_iovec_from_buf(qiov
, 0, bounce_buffer
+ skip_bytes
,
2226 nb_sectors
* BDRV_SECTOR_SIZE
);
2229 qemu_vfree(bounce_buffer
);
2234 * Handle a read request in coroutine context
2236 static int coroutine_fn
bdrv_co_do_readv(BlockDriverState
*bs
,
2237 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
2238 BdrvRequestFlags flags
)
2240 BlockDriver
*drv
= bs
->drv
;
2241 BdrvTrackedRequest req
;
2247 if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
2251 /* throttling disk read I/O */
2252 if (bs
->io_limits_enabled
) {
2253 bdrv_io_limits_intercept(bs
, false, nb_sectors
);
2256 if (bs
->copy_on_read
) {
2257 flags
|= BDRV_REQ_COPY_ON_READ
;
2259 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2260 bs
->copy_on_read_in_flight
++;
2263 if (bs
->copy_on_read_in_flight
) {
2264 wait_for_overlapping_requests(bs
, sector_num
, nb_sectors
);
2267 tracked_request_begin(&req
, bs
, sector_num
, nb_sectors
, false);
2269 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2272 ret
= bdrv_co_is_allocated(bs
, sector_num
, nb_sectors
, &pnum
);
2277 if (!ret
|| pnum
!= nb_sectors
) {
2278 ret
= bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
, qiov
);
2283 ret
= drv
->bdrv_co_readv(bs
, sector_num
, nb_sectors
, qiov
);
2286 tracked_request_end(&req
);
2288 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2289 bs
->copy_on_read_in_flight
--;
2295 int coroutine_fn
bdrv_co_readv(BlockDriverState
*bs
, int64_t sector_num
,
2296 int nb_sectors
, QEMUIOVector
*qiov
)
2298 trace_bdrv_co_readv(bs
, sector_num
, nb_sectors
);
2300 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
, 0);
2303 int coroutine_fn
bdrv_co_copy_on_readv(BlockDriverState
*bs
,
2304 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
2306 trace_bdrv_co_copy_on_readv(bs
, sector_num
, nb_sectors
);
2308 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
,
2309 BDRV_REQ_COPY_ON_READ
);
2312 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
2313 int64_t sector_num
, int nb_sectors
)
2315 BlockDriver
*drv
= bs
->drv
;
2320 /* TODO Emulate only part of misaligned requests instead of letting block
2321 * drivers return -ENOTSUP and emulate everything */
2323 /* First try the efficient write zeroes operation */
2324 if (drv
->bdrv_co_write_zeroes
) {
2325 ret
= drv
->bdrv_co_write_zeroes(bs
, sector_num
, nb_sectors
);
2326 if (ret
!= -ENOTSUP
) {
2331 /* Fall back to bounce buffer if write zeroes is unsupported */
2332 iov
.iov_len
= nb_sectors
* BDRV_SECTOR_SIZE
;
2333 iov
.iov_base
= qemu_blockalign(bs
, iov
.iov_len
);
2334 memset(iov
.iov_base
, 0, iov
.iov_len
);
2335 qemu_iovec_init_external(&qiov
, &iov
, 1);
2337 ret
= drv
->bdrv_co_writev(bs
, sector_num
, nb_sectors
, &qiov
);
2339 qemu_vfree(iov
.iov_base
);
2344 * Handle a write request in coroutine context
2346 static int coroutine_fn
bdrv_co_do_writev(BlockDriverState
*bs
,
2347 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
2348 BdrvRequestFlags flags
)
2350 BlockDriver
*drv
= bs
->drv
;
2351 BdrvTrackedRequest req
;
2357 if (bs
->read_only
) {
2360 if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
2364 /* throttling disk write I/O */
2365 if (bs
->io_limits_enabled
) {
2366 bdrv_io_limits_intercept(bs
, true, nb_sectors
);
2369 if (bs
->copy_on_read_in_flight
) {
2370 wait_for_overlapping_requests(bs
, sector_num
, nb_sectors
);
2373 tracked_request_begin(&req
, bs
, sector_num
, nb_sectors
, true);
2375 if (flags
& BDRV_REQ_ZERO_WRITE
) {
2376 ret
= bdrv_co_do_write_zeroes(bs
, sector_num
, nb_sectors
);
2378 ret
= drv
->bdrv_co_writev(bs
, sector_num
, nb_sectors
, qiov
);
2381 if (ret
== 0 && !bs
->enable_write_cache
) {
2382 ret
= bdrv_co_flush(bs
);
2385 if (bs
->dirty_bitmap
) {
2386 bdrv_set_dirty(bs
, sector_num
, nb_sectors
);
2389 if (bs
->wr_highest_sector
< sector_num
+ nb_sectors
- 1) {
2390 bs
->wr_highest_sector
= sector_num
+ nb_sectors
- 1;
2393 tracked_request_end(&req
);
2398 int coroutine_fn
bdrv_co_writev(BlockDriverState
*bs
, int64_t sector_num
,
2399 int nb_sectors
, QEMUIOVector
*qiov
)
2401 trace_bdrv_co_writev(bs
, sector_num
, nb_sectors
);
2403 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, qiov
, 0);
2406 int coroutine_fn
bdrv_co_write_zeroes(BlockDriverState
*bs
,
2407 int64_t sector_num
, int nb_sectors
)
2409 trace_bdrv_co_write_zeroes(bs
, sector_num
, nb_sectors
);
2411 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, NULL
,
2412 BDRV_REQ_ZERO_WRITE
);
2416 * Truncate file to 'offset' bytes (needed only for file protocols)
2418 int bdrv_truncate(BlockDriverState
*bs
, int64_t offset
)
2420 BlockDriver
*drv
= bs
->drv
;
2424 if (!drv
->bdrv_truncate
)
2428 if (bdrv_in_use(bs
))
2430 ret
= drv
->bdrv_truncate(bs
, offset
);
2432 ret
= refresh_total_sectors(bs
, offset
>> BDRV_SECTOR_BITS
);
2433 bdrv_dev_resize_cb(bs
);
2439 * Length of a allocated file in bytes. Sparse files are counted by actual
2440 * allocated space. Return < 0 if error or unknown.
2442 int64_t bdrv_get_allocated_file_size(BlockDriverState
*bs
)
2444 BlockDriver
*drv
= bs
->drv
;
2448 if (drv
->bdrv_get_allocated_file_size
) {
2449 return drv
->bdrv_get_allocated_file_size(bs
);
2452 return bdrv_get_allocated_file_size(bs
->file
);
2458 * Length of a file in bytes. Return < 0 if error or unknown.
2460 int64_t bdrv_getlength(BlockDriverState
*bs
)
2462 BlockDriver
*drv
= bs
->drv
;
2466 if (bs
->growable
|| bdrv_dev_has_removable_media(bs
)) {
2467 if (drv
->bdrv_getlength
) {
2468 return drv
->bdrv_getlength(bs
);
2471 return bs
->total_sectors
* BDRV_SECTOR_SIZE
;
2474 /* return 0 as number of sectors if no device present or error */
2475 void bdrv_get_geometry(BlockDriverState
*bs
, uint64_t *nb_sectors_ptr
)
2478 length
= bdrv_getlength(bs
);
2482 length
= length
>> BDRV_SECTOR_BITS
;
2483 *nb_sectors_ptr
= length
;
2486 /* throttling disk io limits */
2487 void bdrv_set_io_limits(BlockDriverState
*bs
,
2488 BlockIOLimit
*io_limits
)
2490 bs
->io_limits
= *io_limits
;
2491 bs
->io_limits_enabled
= bdrv_io_limits_enabled(bs
);
2494 void bdrv_set_on_error(BlockDriverState
*bs
, BlockdevOnError on_read_error
,
2495 BlockdevOnError on_write_error
)
2497 bs
->on_read_error
= on_read_error
;
2498 bs
->on_write_error
= on_write_error
;
2501 BlockdevOnError
bdrv_get_on_error(BlockDriverState
*bs
, bool is_read
)
2503 return is_read
? bs
->on_read_error
: bs
->on_write_error
;
2506 BlockErrorAction
bdrv_get_error_action(BlockDriverState
*bs
, bool is_read
, int error
)
2508 BlockdevOnError on_err
= is_read
? bs
->on_read_error
: bs
->on_write_error
;
2511 case BLOCKDEV_ON_ERROR_ENOSPC
:
2512 return (error
== ENOSPC
) ? BDRV_ACTION_STOP
: BDRV_ACTION_REPORT
;
2513 case BLOCKDEV_ON_ERROR_STOP
:
2514 return BDRV_ACTION_STOP
;
2515 case BLOCKDEV_ON_ERROR_REPORT
:
2516 return BDRV_ACTION_REPORT
;
2517 case BLOCKDEV_ON_ERROR_IGNORE
:
2518 return BDRV_ACTION_IGNORE
;
2524 /* This is done by device models because, while the block layer knows
2525 * about the error, it does not know whether an operation comes from
2526 * the device or the block layer (from a job, for example).
2528 void bdrv_error_action(BlockDriverState
*bs
, BlockErrorAction action
,
2529 bool is_read
, int error
)
2532 bdrv_emit_qmp_error_event(bs
, QEVENT_BLOCK_IO_ERROR
, action
, is_read
);
2533 if (action
== BDRV_ACTION_STOP
) {
2534 vm_stop(RUN_STATE_IO_ERROR
);
2535 bdrv_iostatus_set_err(bs
, error
);
2539 int bdrv_is_read_only(BlockDriverState
*bs
)
2541 return bs
->read_only
;
2544 int bdrv_is_sg(BlockDriverState
*bs
)
2549 int bdrv_enable_write_cache(BlockDriverState
*bs
)
2551 return bs
->enable_write_cache
;
2554 void bdrv_set_enable_write_cache(BlockDriverState
*bs
, bool wce
)
2556 bs
->enable_write_cache
= wce
;
2558 /* so a reopen() will preserve wce */
2560 bs
->open_flags
|= BDRV_O_CACHE_WB
;
2562 bs
->open_flags
&= ~BDRV_O_CACHE_WB
;
2566 int bdrv_is_encrypted(BlockDriverState
*bs
)
2568 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
2570 return bs
->encrypted
;
2573 int bdrv_key_required(BlockDriverState
*bs
)
2575 BlockDriverState
*backing_hd
= bs
->backing_hd
;
2577 if (backing_hd
&& backing_hd
->encrypted
&& !backing_hd
->valid_key
)
2579 return (bs
->encrypted
&& !bs
->valid_key
);
2582 int bdrv_set_key(BlockDriverState
*bs
, const char *key
)
2585 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
) {
2586 ret
= bdrv_set_key(bs
->backing_hd
, key
);
2592 if (!bs
->encrypted
) {
2594 } else if (!bs
->drv
|| !bs
->drv
->bdrv_set_key
) {
2597 ret
= bs
->drv
->bdrv_set_key(bs
, key
);
2600 } else if (!bs
->valid_key
) {
2602 /* call the change callback now, we skipped it on open */
2603 bdrv_dev_change_media_cb(bs
, true);
2608 const char *bdrv_get_format_name(BlockDriverState
*bs
)
2610 return bs
->drv
? bs
->drv
->format_name
: NULL
;
2613 void bdrv_iterate_format(void (*it
)(void *opaque
, const char *name
),
2618 QLIST_FOREACH(drv
, &bdrv_drivers
, list
) {
2619 it(opaque
, drv
->format_name
);
2623 BlockDriverState
*bdrv_find(const char *name
)
2625 BlockDriverState
*bs
;
2627 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
2628 if (!strcmp(name
, bs
->device_name
)) {
2635 BlockDriverState
*bdrv_next(BlockDriverState
*bs
)
2638 return QTAILQ_FIRST(&bdrv_states
);
2640 return QTAILQ_NEXT(bs
, list
);
2643 void bdrv_iterate(void (*it
)(void *opaque
, BlockDriverState
*bs
), void *opaque
)
2645 BlockDriverState
*bs
;
2647 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
2652 const char *bdrv_get_device_name(BlockDriverState
*bs
)
2654 return bs
->device_name
;
2657 int bdrv_get_flags(BlockDriverState
*bs
)
2659 return bs
->open_flags
;
2662 void bdrv_flush_all(void)
2664 BlockDriverState
*bs
;
2666 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
2671 int bdrv_has_zero_init(BlockDriverState
*bs
)
2675 if (bs
->drv
->bdrv_has_zero_init
) {
2676 return bs
->drv
->bdrv_has_zero_init(bs
);
2682 typedef struct BdrvCoIsAllocatedData
{
2683 BlockDriverState
*bs
;
2684 BlockDriverState
*base
;
2690 } BdrvCoIsAllocatedData
;
2693 * Returns true iff the specified sector is present in the disk image. Drivers
2694 * not implementing the functionality are assumed to not support backing files,
2695 * hence all their sectors are reported as allocated.
2697 * If 'sector_num' is beyond the end of the disk image the return value is 0
2698 * and 'pnum' is set to 0.
2700 * 'pnum' is set to the number of sectors (including and immediately following
2701 * the specified sector) that are known to be in the same
2702 * allocated/unallocated state.
2704 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
2705 * beyond the end of the disk image it will be clamped.
2707 int coroutine_fn
bdrv_co_is_allocated(BlockDriverState
*bs
, int64_t sector_num
,
2708 int nb_sectors
, int *pnum
)
2712 if (sector_num
>= bs
->total_sectors
) {
2717 n
= bs
->total_sectors
- sector_num
;
2718 if (n
< nb_sectors
) {
2722 if (!bs
->drv
->bdrv_co_is_allocated
) {
2727 return bs
->drv
->bdrv_co_is_allocated(bs
, sector_num
, nb_sectors
, pnum
);
2730 /* Coroutine wrapper for bdrv_is_allocated() */
2731 static void coroutine_fn
bdrv_is_allocated_co_entry(void *opaque
)
2733 BdrvCoIsAllocatedData
*data
= opaque
;
2734 BlockDriverState
*bs
= data
->bs
;
2736 data
->ret
= bdrv_co_is_allocated(bs
, data
->sector_num
, data
->nb_sectors
,
2742 * Synchronous wrapper around bdrv_co_is_allocated().
2744 * See bdrv_co_is_allocated() for details.
2746 int bdrv_is_allocated(BlockDriverState
*bs
, int64_t sector_num
, int nb_sectors
,
2750 BdrvCoIsAllocatedData data
= {
2752 .sector_num
= sector_num
,
2753 .nb_sectors
= nb_sectors
,
2758 co
= qemu_coroutine_create(bdrv_is_allocated_co_entry
);
2759 qemu_coroutine_enter(co
, &data
);
2760 while (!data
.done
) {
2767 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
2769 * Return true if the given sector is allocated in any image between
2770 * BASE and TOP (inclusive). BASE can be NULL to check if the given
2771 * sector is allocated in any image of the chain. Return false otherwise.
2773 * 'pnum' is set to the number of sectors (including and immediately following
2774 * the specified sector) that are known to be in the same
2775 * allocated/unallocated state.
2778 int coroutine_fn
bdrv_co_is_allocated_above(BlockDriverState
*top
,
2779 BlockDriverState
*base
,
2781 int nb_sectors
, int *pnum
)
2783 BlockDriverState
*intermediate
;
2784 int ret
, n
= nb_sectors
;
2787 while (intermediate
&& intermediate
!= base
) {
2789 ret
= bdrv_co_is_allocated(intermediate
, sector_num
, nb_sectors
,
2799 * [sector_num, nb_sectors] is unallocated on top but intermediate
2802 * [sector_num+x, nr_sectors] allocated.
2804 if (n
> pnum_inter
&&
2805 (intermediate
== top
||
2806 sector_num
+ pnum_inter
< intermediate
->total_sectors
)) {
2810 intermediate
= intermediate
->backing_hd
;
2817 /* Coroutine wrapper for bdrv_is_allocated_above() */
2818 static void coroutine_fn
bdrv_is_allocated_above_co_entry(void *opaque
)
2820 BdrvCoIsAllocatedData
*data
= opaque
;
2821 BlockDriverState
*top
= data
->bs
;
2822 BlockDriverState
*base
= data
->base
;
2824 data
->ret
= bdrv_co_is_allocated_above(top
, base
, data
->sector_num
,
2825 data
->nb_sectors
, data
->pnum
);
2830 * Synchronous wrapper around bdrv_co_is_allocated_above().
2832 * See bdrv_co_is_allocated_above() for details.
2834 int bdrv_is_allocated_above(BlockDriverState
*top
, BlockDriverState
*base
,
2835 int64_t sector_num
, int nb_sectors
, int *pnum
)
2838 BdrvCoIsAllocatedData data
= {
2841 .sector_num
= sector_num
,
2842 .nb_sectors
= nb_sectors
,
2847 co
= qemu_coroutine_create(bdrv_is_allocated_above_co_entry
);
2848 qemu_coroutine_enter(co
, &data
);
2849 while (!data
.done
) {
2855 BlockInfo
*bdrv_query_info(BlockDriverState
*bs
)
2857 BlockInfo
*info
= g_malloc0(sizeof(*info
));
2858 info
->device
= g_strdup(bs
->device_name
);
2859 info
->type
= g_strdup("unknown");
2860 info
->locked
= bdrv_dev_is_medium_locked(bs
);
2861 info
->removable
= bdrv_dev_has_removable_media(bs
);
2863 if (bdrv_dev_has_removable_media(bs
)) {
2864 info
->has_tray_open
= true;
2865 info
->tray_open
= bdrv_dev_is_tray_open(bs
);
2868 if (bdrv_iostatus_is_enabled(bs
)) {
2869 info
->has_io_status
= true;
2870 info
->io_status
= bs
->iostatus
;
2873 if (bs
->dirty_bitmap
) {
2874 info
->has_dirty
= true;
2875 info
->dirty
= g_malloc0(sizeof(*info
->dirty
));
2876 info
->dirty
->count
= bdrv_get_dirty_count(bs
) * BDRV_SECTOR_SIZE
;
2877 info
->dirty
->granularity
=
2878 ((int64_t) BDRV_SECTOR_SIZE
<< hbitmap_granularity(bs
->dirty_bitmap
));
2882 info
->has_inserted
= true;
2883 info
->inserted
= g_malloc0(sizeof(*info
->inserted
));
2884 info
->inserted
->file
= g_strdup(bs
->filename
);
2885 info
->inserted
->ro
= bs
->read_only
;
2886 info
->inserted
->drv
= g_strdup(bs
->drv
->format_name
);
2887 info
->inserted
->encrypted
= bs
->encrypted
;
2888 info
->inserted
->encryption_key_missing
= bdrv_key_required(bs
);
2890 if (bs
->backing_file
[0]) {
2891 info
->inserted
->has_backing_file
= true;
2892 info
->inserted
->backing_file
= g_strdup(bs
->backing_file
);
2895 info
->inserted
->backing_file_depth
= bdrv_get_backing_file_depth(bs
);
2897 if (bs
->io_limits_enabled
) {
2898 info
->inserted
->bps
=
2899 bs
->io_limits
.bps
[BLOCK_IO_LIMIT_TOTAL
];
2900 info
->inserted
->bps_rd
=
2901 bs
->io_limits
.bps
[BLOCK_IO_LIMIT_READ
];
2902 info
->inserted
->bps_wr
=
2903 bs
->io_limits
.bps
[BLOCK_IO_LIMIT_WRITE
];
2904 info
->inserted
->iops
=
2905 bs
->io_limits
.iops
[BLOCK_IO_LIMIT_TOTAL
];
2906 info
->inserted
->iops_rd
=
2907 bs
->io_limits
.iops
[BLOCK_IO_LIMIT_READ
];
2908 info
->inserted
->iops_wr
=
2909 bs
->io_limits
.iops
[BLOCK_IO_LIMIT_WRITE
];
2915 BlockInfoList
*qmp_query_block(Error
**errp
)
2917 BlockInfoList
*head
= NULL
, **p_next
= &head
;
2918 BlockDriverState
*bs
;
2920 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
2921 BlockInfoList
*info
= g_malloc0(sizeof(*info
));
2922 info
->value
= bdrv_query_info(bs
);
2925 p_next
= &info
->next
;
2931 BlockStats
*bdrv_query_stats(const BlockDriverState
*bs
)
2935 s
= g_malloc0(sizeof(*s
));
2937 if (bs
->device_name
[0]) {
2938 s
->has_device
= true;
2939 s
->device
= g_strdup(bs
->device_name
);
2942 s
->stats
= g_malloc0(sizeof(*s
->stats
));
2943 s
->stats
->rd_bytes
= bs
->nr_bytes
[BDRV_ACCT_READ
];
2944 s
->stats
->wr_bytes
= bs
->nr_bytes
[BDRV_ACCT_WRITE
];
2945 s
->stats
->rd_operations
= bs
->nr_ops
[BDRV_ACCT_READ
];
2946 s
->stats
->wr_operations
= bs
->nr_ops
[BDRV_ACCT_WRITE
];
2947 s
->stats
->wr_highest_offset
= bs
->wr_highest_sector
* BDRV_SECTOR_SIZE
;
2948 s
->stats
->flush_operations
= bs
->nr_ops
[BDRV_ACCT_FLUSH
];
2949 s
->stats
->wr_total_time_ns
= bs
->total_time_ns
[BDRV_ACCT_WRITE
];
2950 s
->stats
->rd_total_time_ns
= bs
->total_time_ns
[BDRV_ACCT_READ
];
2951 s
->stats
->flush_total_time_ns
= bs
->total_time_ns
[BDRV_ACCT_FLUSH
];
2954 s
->has_parent
= true;
2955 s
->parent
= bdrv_query_stats(bs
->file
);
2961 BlockStatsList
*qmp_query_blockstats(Error
**errp
)
2963 BlockStatsList
*head
= NULL
, **p_next
= &head
;
2964 BlockDriverState
*bs
;
2966 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
2967 BlockStatsList
*info
= g_malloc0(sizeof(*info
));
2968 info
->value
= bdrv_query_stats(bs
);
2971 p_next
= &info
->next
;
2977 const char *bdrv_get_encrypted_filename(BlockDriverState
*bs
)
2979 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
2980 return bs
->backing_file
;
2981 else if (bs
->encrypted
)
2982 return bs
->filename
;
2987 void bdrv_get_backing_filename(BlockDriverState
*bs
,
2988 char *filename
, int filename_size
)
2990 pstrcpy(filename
, filename_size
, bs
->backing_file
);
2993 int bdrv_write_compressed(BlockDriverState
*bs
, int64_t sector_num
,
2994 const uint8_t *buf
, int nb_sectors
)
2996 BlockDriver
*drv
= bs
->drv
;
2999 if (!drv
->bdrv_write_compressed
)
3001 if (bdrv_check_request(bs
, sector_num
, nb_sectors
))
3004 assert(!bs
->dirty_bitmap
);
3006 return drv
->bdrv_write_compressed(bs
, sector_num
, buf
, nb_sectors
);
3009 int bdrv_get_info(BlockDriverState
*bs
, BlockDriverInfo
*bdi
)
3011 BlockDriver
*drv
= bs
->drv
;
3014 if (!drv
->bdrv_get_info
)
3016 memset(bdi
, 0, sizeof(*bdi
));
3017 return drv
->bdrv_get_info(bs
, bdi
);
3020 int bdrv_save_vmstate(BlockDriverState
*bs
, const uint8_t *buf
,
3021 int64_t pos
, int size
)
3023 BlockDriver
*drv
= bs
->drv
;
3026 if (drv
->bdrv_save_vmstate
)
3027 return drv
->bdrv_save_vmstate(bs
, buf
, pos
, size
);
3029 return bdrv_save_vmstate(bs
->file
, buf
, pos
, size
);
3033 int bdrv_load_vmstate(BlockDriverState
*bs
, uint8_t *buf
,
3034 int64_t pos
, int size
)
3036 BlockDriver
*drv
= bs
->drv
;
3039 if (drv
->bdrv_load_vmstate
)
3040 return drv
->bdrv_load_vmstate(bs
, buf
, pos
, size
);
3042 return bdrv_load_vmstate(bs
->file
, buf
, pos
, size
);
3046 void bdrv_debug_event(BlockDriverState
*bs
, BlkDebugEvent event
)
3048 BlockDriver
*drv
= bs
->drv
;
3050 if (!drv
|| !drv
->bdrv_debug_event
) {
3054 drv
->bdrv_debug_event(bs
, event
);
3057 int bdrv_debug_breakpoint(BlockDriverState
*bs
, const char *event
,
3060 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_breakpoint
) {
3064 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_breakpoint
) {
3065 return bs
->drv
->bdrv_debug_breakpoint(bs
, event
, tag
);
3071 int bdrv_debug_resume(BlockDriverState
*bs
, const char *tag
)
3073 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_resume
) {
3077 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_resume
) {
3078 return bs
->drv
->bdrv_debug_resume(bs
, tag
);
3084 bool bdrv_debug_is_suspended(BlockDriverState
*bs
, const char *tag
)
3086 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_is_suspended
) {
3090 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_is_suspended
) {
3091 return bs
->drv
->bdrv_debug_is_suspended(bs
, tag
);
3097 /**************************************************************/
3098 /* handling of snapshots */
3100 int bdrv_can_snapshot(BlockDriverState
*bs
)
3102 BlockDriver
*drv
= bs
->drv
;
3103 if (!drv
|| !bdrv_is_inserted(bs
) || bdrv_is_read_only(bs
)) {
3107 if (!drv
->bdrv_snapshot_create
) {
3108 if (bs
->file
!= NULL
) {
3109 return bdrv_can_snapshot(bs
->file
);
3117 int bdrv_is_snapshot(BlockDriverState
*bs
)
3119 return !!(bs
->open_flags
& BDRV_O_SNAPSHOT
);
3122 BlockDriverState
*bdrv_snapshots(void)
3124 BlockDriverState
*bs
;
3127 return bs_snapshots
;
3131 while ((bs
= bdrv_next(bs
))) {
3132 if (bdrv_can_snapshot(bs
)) {
3140 int bdrv_snapshot_create(BlockDriverState
*bs
,
3141 QEMUSnapshotInfo
*sn_info
)
3143 BlockDriver
*drv
= bs
->drv
;
3146 if (drv
->bdrv_snapshot_create
)
3147 return drv
->bdrv_snapshot_create(bs
, sn_info
);
3149 return bdrv_snapshot_create(bs
->file
, sn_info
);
3153 int bdrv_snapshot_goto(BlockDriverState
*bs
,
3154 const char *snapshot_id
)
3156 BlockDriver
*drv
= bs
->drv
;
3161 if (drv
->bdrv_snapshot_goto
)
3162 return drv
->bdrv_snapshot_goto(bs
, snapshot_id
);
3165 drv
->bdrv_close(bs
);
3166 ret
= bdrv_snapshot_goto(bs
->file
, snapshot_id
);
3167 open_ret
= drv
->bdrv_open(bs
, bs
->open_flags
);
3169 bdrv_delete(bs
->file
);
3179 int bdrv_snapshot_delete(BlockDriverState
*bs
, const char *snapshot_id
)
3181 BlockDriver
*drv
= bs
->drv
;
3184 if (drv
->bdrv_snapshot_delete
)
3185 return drv
->bdrv_snapshot_delete(bs
, snapshot_id
);
3187 return bdrv_snapshot_delete(bs
->file
, snapshot_id
);
3191 int bdrv_snapshot_list(BlockDriverState
*bs
,
3192 QEMUSnapshotInfo
**psn_info
)
3194 BlockDriver
*drv
= bs
->drv
;
3197 if (drv
->bdrv_snapshot_list
)
3198 return drv
->bdrv_snapshot_list(bs
, psn_info
);
3200 return bdrv_snapshot_list(bs
->file
, psn_info
);
3204 int bdrv_snapshot_load_tmp(BlockDriverState
*bs
,
3205 const char *snapshot_name
)
3207 BlockDriver
*drv
= bs
->drv
;
3211 if (!bs
->read_only
) {
3214 if (drv
->bdrv_snapshot_load_tmp
) {
3215 return drv
->bdrv_snapshot_load_tmp(bs
, snapshot_name
);
3220 /* backing_file can either be relative, or absolute, or a protocol. If it is
3221 * relative, it must be relative to the chain. So, passing in bs->filename
3222 * from a BDS as backing_file should not be done, as that may be relative to
3223 * the CWD rather than the chain. */
3224 BlockDriverState
*bdrv_find_backing_image(BlockDriverState
*bs
,
3225 const char *backing_file
)
3227 char *filename_full
= NULL
;
3228 char *backing_file_full
= NULL
;
3229 char *filename_tmp
= NULL
;
3230 int is_protocol
= 0;
3231 BlockDriverState
*curr_bs
= NULL
;
3232 BlockDriverState
*retval
= NULL
;
3234 if (!bs
|| !bs
->drv
|| !backing_file
) {
3238 filename_full
= g_malloc(PATH_MAX
);
3239 backing_file_full
= g_malloc(PATH_MAX
);
3240 filename_tmp
= g_malloc(PATH_MAX
);
3242 is_protocol
= path_has_protocol(backing_file
);
3244 for (curr_bs
= bs
; curr_bs
->backing_hd
; curr_bs
= curr_bs
->backing_hd
) {
3246 /* If either of the filename paths is actually a protocol, then
3247 * compare unmodified paths; otherwise make paths relative */
3248 if (is_protocol
|| path_has_protocol(curr_bs
->backing_file
)) {
3249 if (strcmp(backing_file
, curr_bs
->backing_file
) == 0) {
3250 retval
= curr_bs
->backing_hd
;
3254 /* If not an absolute filename path, make it relative to the current
3255 * image's filename path */
3256 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
3259 /* We are going to compare absolute pathnames */
3260 if (!realpath(filename_tmp
, filename_full
)) {
3264 /* We need to make sure the backing filename we are comparing against
3265 * is relative to the current image filename (or absolute) */
3266 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
3267 curr_bs
->backing_file
);
3269 if (!realpath(filename_tmp
, backing_file_full
)) {
3273 if (strcmp(backing_file_full
, filename_full
) == 0) {
3274 retval
= curr_bs
->backing_hd
;
3280 g_free(filename_full
);
3281 g_free(backing_file_full
);
3282 g_free(filename_tmp
);
3286 int bdrv_get_backing_file_depth(BlockDriverState
*bs
)
3292 if (!bs
->backing_hd
) {
3296 return 1 + bdrv_get_backing_file_depth(bs
->backing_hd
);
3299 BlockDriverState
*bdrv_find_base(BlockDriverState
*bs
)
3301 BlockDriverState
*curr_bs
= NULL
;
3309 while (curr_bs
->backing_hd
) {
3310 curr_bs
= curr_bs
->backing_hd
;
3315 #define NB_SUFFIXES 4
3317 char *get_human_readable_size(char *buf
, int buf_size
, int64_t size
)
3319 static const char suffixes
[NB_SUFFIXES
] = "KMGT";
3324 snprintf(buf
, buf_size
, "%" PRId64
, size
);
3327 for(i
= 0; i
< NB_SUFFIXES
; i
++) {
3328 if (size
< (10 * base
)) {
3329 snprintf(buf
, buf_size
, "%0.1f%c",
3330 (double)size
/ base
,
3333 } else if (size
< (1000 * base
) || i
== (NB_SUFFIXES
- 1)) {
3334 snprintf(buf
, buf_size
, "%" PRId64
"%c",
3335 ((size
+ (base
>> 1)) / base
),
3345 char *bdrv_snapshot_dump(char *buf
, int buf_size
, QEMUSnapshotInfo
*sn
)
3347 char buf1
[128], date_buf
[128], clock_buf
[128];
3353 snprintf(buf
, buf_size
,
3354 "%-10s%-20s%7s%20s%15s",
3355 "ID", "TAG", "VM SIZE", "DATE", "VM CLOCK");
3358 localtime_r(&ti
, &tm
);
3359 strftime(date_buf
, sizeof(date_buf
),
3360 "%Y-%m-%d %H:%M:%S", &tm
);
3361 secs
= sn
->vm_clock_nsec
/ 1000000000;
3362 snprintf(clock_buf
, sizeof(clock_buf
),
3363 "%02d:%02d:%02d.%03d",
3365 (int)((secs
/ 60) % 60),
3367 (int)((sn
->vm_clock_nsec
/ 1000000) % 1000));
3368 snprintf(buf
, buf_size
,
3369 "%-10s%-20s%7s%20s%15s",
3370 sn
->id_str
, sn
->name
,
3371 get_human_readable_size(buf1
, sizeof(buf1
), sn
->vm_state_size
),
3378 /**************************************************************/
3381 BlockDriverAIOCB
*bdrv_aio_readv(BlockDriverState
*bs
, int64_t sector_num
,
3382 QEMUIOVector
*qiov
, int nb_sectors
,
3383 BlockDriverCompletionFunc
*cb
, void *opaque
)
3385 trace_bdrv_aio_readv(bs
, sector_num
, nb_sectors
, opaque
);
3387 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
,
3391 BlockDriverAIOCB
*bdrv_aio_writev(BlockDriverState
*bs
, int64_t sector_num
,
3392 QEMUIOVector
*qiov
, int nb_sectors
,
3393 BlockDriverCompletionFunc
*cb
, void *opaque
)
3395 trace_bdrv_aio_writev(bs
, sector_num
, nb_sectors
, opaque
);
3397 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
,
3402 typedef struct MultiwriteCB
{
3407 BlockDriverCompletionFunc
*cb
;
3409 QEMUIOVector
*free_qiov
;
3413 static void multiwrite_user_cb(MultiwriteCB
*mcb
)
3417 for (i
= 0; i
< mcb
->num_callbacks
; i
++) {
3418 mcb
->callbacks
[i
].cb(mcb
->callbacks
[i
].opaque
, mcb
->error
);
3419 if (mcb
->callbacks
[i
].free_qiov
) {
3420 qemu_iovec_destroy(mcb
->callbacks
[i
].free_qiov
);
3422 g_free(mcb
->callbacks
[i
].free_qiov
);
3426 static void multiwrite_cb(void *opaque
, int ret
)
3428 MultiwriteCB
*mcb
= opaque
;
3430 trace_multiwrite_cb(mcb
, ret
);
3432 if (ret
< 0 && !mcb
->error
) {
3436 mcb
->num_requests
--;
3437 if (mcb
->num_requests
== 0) {
3438 multiwrite_user_cb(mcb
);
3443 static int multiwrite_req_compare(const void *a
, const void *b
)
3445 const BlockRequest
*req1
= a
, *req2
= b
;
3448 * Note that we can't simply subtract req2->sector from req1->sector
3449 * here as that could overflow the return value.
3451 if (req1
->sector
> req2
->sector
) {
3453 } else if (req1
->sector
< req2
->sector
) {
3461 * Takes a bunch of requests and tries to merge them. Returns the number of
3462 * requests that remain after merging.
3464 static int multiwrite_merge(BlockDriverState
*bs
, BlockRequest
*reqs
,
3465 int num_reqs
, MultiwriteCB
*mcb
)
3469 // Sort requests by start sector
3470 qsort(reqs
, num_reqs
, sizeof(*reqs
), &multiwrite_req_compare
);
3472 // Check if adjacent requests touch the same clusters. If so, combine them,
3473 // filling up gaps with zero sectors.
3475 for (i
= 1; i
< num_reqs
; i
++) {
3477 int64_t oldreq_last
= reqs
[outidx
].sector
+ reqs
[outidx
].nb_sectors
;
3479 // Handle exactly sequential writes and overlapping writes.
3480 if (reqs
[i
].sector
<= oldreq_last
) {
3484 if (reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1 > IOV_MAX
) {
3490 QEMUIOVector
*qiov
= g_malloc0(sizeof(*qiov
));
3491 qemu_iovec_init(qiov
,
3492 reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1);
3494 // Add the first request to the merged one. If the requests are
3495 // overlapping, drop the last sectors of the first request.
3496 size
= (reqs
[i
].sector
- reqs
[outidx
].sector
) << 9;
3497 qemu_iovec_concat(qiov
, reqs
[outidx
].qiov
, 0, size
);
3499 // We should need to add any zeros between the two requests
3500 assert (reqs
[i
].sector
<= oldreq_last
);
3502 // Add the second request
3503 qemu_iovec_concat(qiov
, reqs
[i
].qiov
, 0, reqs
[i
].qiov
->size
);
3505 reqs
[outidx
].nb_sectors
= qiov
->size
>> 9;
3506 reqs
[outidx
].qiov
= qiov
;
3508 mcb
->callbacks
[i
].free_qiov
= reqs
[outidx
].qiov
;
3511 reqs
[outidx
].sector
= reqs
[i
].sector
;
3512 reqs
[outidx
].nb_sectors
= reqs
[i
].nb_sectors
;
3513 reqs
[outidx
].qiov
= reqs
[i
].qiov
;
3521 * Submit multiple AIO write requests at once.
3523 * On success, the function returns 0 and all requests in the reqs array have
3524 * been submitted. In error case this function returns -1, and any of the
3525 * requests may or may not be submitted yet. In particular, this means that the
3526 * callback will be called for some of the requests, for others it won't. The
3527 * caller must check the error field of the BlockRequest to wait for the right
3528 * callbacks (if error != 0, no callback will be called).
3530 * The implementation may modify the contents of the reqs array, e.g. to merge
3531 * requests. However, the fields opaque and error are left unmodified as they
3532 * are used to signal failure for a single request to the caller.
3534 int bdrv_aio_multiwrite(BlockDriverState
*bs
, BlockRequest
*reqs
, int num_reqs
)
3539 /* don't submit writes if we don't have a medium */
3540 if (bs
->drv
== NULL
) {
3541 for (i
= 0; i
< num_reqs
; i
++) {
3542 reqs
[i
].error
= -ENOMEDIUM
;
3547 if (num_reqs
== 0) {
3551 // Create MultiwriteCB structure
3552 mcb
= g_malloc0(sizeof(*mcb
) + num_reqs
* sizeof(*mcb
->callbacks
));
3553 mcb
->num_requests
= 0;
3554 mcb
->num_callbacks
= num_reqs
;
3556 for (i
= 0; i
< num_reqs
; i
++) {
3557 mcb
->callbacks
[i
].cb
= reqs
[i
].cb
;
3558 mcb
->callbacks
[i
].opaque
= reqs
[i
].opaque
;
3561 // Check for mergable requests
3562 num_reqs
= multiwrite_merge(bs
, reqs
, num_reqs
, mcb
);
3564 trace_bdrv_aio_multiwrite(mcb
, mcb
->num_callbacks
, num_reqs
);
3566 /* Run the aio requests. */
3567 mcb
->num_requests
= num_reqs
;
3568 for (i
= 0; i
< num_reqs
; i
++) {
3569 bdrv_aio_writev(bs
, reqs
[i
].sector
, reqs
[i
].qiov
,
3570 reqs
[i
].nb_sectors
, multiwrite_cb
, mcb
);
3576 void bdrv_aio_cancel(BlockDriverAIOCB
*acb
)
3578 acb
->aiocb_info
->cancel(acb
);
3581 /* block I/O throttling */
3582 static bool bdrv_exceed_bps_limits(BlockDriverState
*bs
, int nb_sectors
,
3583 bool is_write
, double elapsed_time
, uint64_t *wait
)
3585 uint64_t bps_limit
= 0;
3586 double bytes_limit
, bytes_base
, bytes_res
;
3587 double slice_time
, wait_time
;
3589 if (bs
->io_limits
.bps
[BLOCK_IO_LIMIT_TOTAL
]) {
3590 bps_limit
= bs
->io_limits
.bps
[BLOCK_IO_LIMIT_TOTAL
];
3591 } else if (bs
->io_limits
.bps
[is_write
]) {
3592 bps_limit
= bs
->io_limits
.bps
[is_write
];
3601 slice_time
= bs
->slice_end
- bs
->slice_start
;
3602 slice_time
/= (NANOSECONDS_PER_SECOND
);
3603 bytes_limit
= bps_limit
* slice_time
;
3604 bytes_base
= bs
->nr_bytes
[is_write
] - bs
->io_base
.bytes
[is_write
];
3605 if (bs
->io_limits
.bps
[BLOCK_IO_LIMIT_TOTAL
]) {
3606 bytes_base
+= bs
->nr_bytes
[!is_write
] - bs
->io_base
.bytes
[!is_write
];
3609 /* bytes_base: the bytes of data which have been read/written; and
3610 * it is obtained from the history statistic info.
3611 * bytes_res: the remaining bytes of data which need to be read/written.
3612 * (bytes_base + bytes_res) / bps_limit: used to calcuate
3613 * the total time for completing reading/writting all data.
3615 bytes_res
= (unsigned) nb_sectors
* BDRV_SECTOR_SIZE
;
3617 if (bytes_base
+ bytes_res
<= bytes_limit
) {
3625 /* Calc approx time to dispatch */
3626 wait_time
= (bytes_base
+ bytes_res
) / bps_limit
- elapsed_time
;
3628 /* When the I/O rate at runtime exceeds the limits,
3629 * bs->slice_end need to be extended in order that the current statistic
3630 * info can be kept until the timer fire, so it is increased and tuned
3631 * based on the result of experiment.
3633 bs
->slice_time
= wait_time
* BLOCK_IO_SLICE_TIME
* 10;
3634 bs
->slice_end
+= bs
->slice_time
- 3 * BLOCK_IO_SLICE_TIME
;
3636 *wait
= wait_time
* BLOCK_IO_SLICE_TIME
* 10;
3642 static bool bdrv_exceed_iops_limits(BlockDriverState
*bs
, bool is_write
,
3643 double elapsed_time
, uint64_t *wait
)
3645 uint64_t iops_limit
= 0;
3646 double ios_limit
, ios_base
;
3647 double slice_time
, wait_time
;
3649 if (bs
->io_limits
.iops
[BLOCK_IO_LIMIT_TOTAL
]) {
3650 iops_limit
= bs
->io_limits
.iops
[BLOCK_IO_LIMIT_TOTAL
];
3651 } else if (bs
->io_limits
.iops
[is_write
]) {
3652 iops_limit
= bs
->io_limits
.iops
[is_write
];
3661 slice_time
= bs
->slice_end
- bs
->slice_start
;
3662 slice_time
/= (NANOSECONDS_PER_SECOND
);
3663 ios_limit
= iops_limit
* slice_time
;
3664 ios_base
= bs
->nr_ops
[is_write
] - bs
->io_base
.ios
[is_write
];
3665 if (bs
->io_limits
.iops
[BLOCK_IO_LIMIT_TOTAL
]) {
3666 ios_base
+= bs
->nr_ops
[!is_write
] - bs
->io_base
.ios
[!is_write
];
3669 if (ios_base
+ 1 <= ios_limit
) {
3677 /* Calc approx time to dispatch */
3678 wait_time
= (ios_base
+ 1) / iops_limit
;
3679 if (wait_time
> elapsed_time
) {
3680 wait_time
= wait_time
- elapsed_time
;
3685 bs
->slice_time
= wait_time
* BLOCK_IO_SLICE_TIME
* 10;
3686 bs
->slice_end
+= bs
->slice_time
- 3 * BLOCK_IO_SLICE_TIME
;
3688 *wait
= wait_time
* BLOCK_IO_SLICE_TIME
* 10;
3694 static bool bdrv_exceed_io_limits(BlockDriverState
*bs
, int nb_sectors
,
3695 bool is_write
, int64_t *wait
)
3697 int64_t now
, max_wait
;
3698 uint64_t bps_wait
= 0, iops_wait
= 0;
3699 double elapsed_time
;
3700 int bps_ret
, iops_ret
;
3702 now
= qemu_get_clock_ns(vm_clock
);
3703 if ((bs
->slice_start
< now
)
3704 && (bs
->slice_end
> now
)) {
3705 bs
->slice_end
= now
+ bs
->slice_time
;
3707 bs
->slice_time
= 5 * BLOCK_IO_SLICE_TIME
;
3708 bs
->slice_start
= now
;
3709 bs
->slice_end
= now
+ bs
->slice_time
;
3711 bs
->io_base
.bytes
[is_write
] = bs
->nr_bytes
[is_write
];
3712 bs
->io_base
.bytes
[!is_write
] = bs
->nr_bytes
[!is_write
];
3714 bs
->io_base
.ios
[is_write
] = bs
->nr_ops
[is_write
];
3715 bs
->io_base
.ios
[!is_write
] = bs
->nr_ops
[!is_write
];
3718 elapsed_time
= now
- bs
->slice_start
;
3719 elapsed_time
/= (NANOSECONDS_PER_SECOND
);
3721 bps_ret
= bdrv_exceed_bps_limits(bs
, nb_sectors
,
3722 is_write
, elapsed_time
, &bps_wait
);
3723 iops_ret
= bdrv_exceed_iops_limits(bs
, is_write
,
3724 elapsed_time
, &iops_wait
);
3725 if (bps_ret
|| iops_ret
) {
3726 max_wait
= bps_wait
> iops_wait
? bps_wait
: iops_wait
;
3731 now
= qemu_get_clock_ns(vm_clock
);
3732 if (bs
->slice_end
< now
+ max_wait
) {
3733 bs
->slice_end
= now
+ max_wait
;
3746 /**************************************************************/
3747 /* async block device emulation */
3749 typedef struct BlockDriverAIOCBSync
{
3750 BlockDriverAIOCB common
;
3753 /* vector translation state */
3757 } BlockDriverAIOCBSync
;
3759 static void bdrv_aio_cancel_em(BlockDriverAIOCB
*blockacb
)
3761 BlockDriverAIOCBSync
*acb
=
3762 container_of(blockacb
, BlockDriverAIOCBSync
, common
);
3763 qemu_bh_delete(acb
->bh
);
3765 qemu_aio_release(acb
);
3768 static const AIOCBInfo bdrv_em_aiocb_info
= {
3769 .aiocb_size
= sizeof(BlockDriverAIOCBSync
),
3770 .cancel
= bdrv_aio_cancel_em
,
3773 static void bdrv_aio_bh_cb(void *opaque
)
3775 BlockDriverAIOCBSync
*acb
= opaque
;
3778 qemu_iovec_from_buf(acb
->qiov
, 0, acb
->bounce
, acb
->qiov
->size
);
3779 qemu_vfree(acb
->bounce
);
3780 acb
->common
.cb(acb
->common
.opaque
, acb
->ret
);
3781 qemu_bh_delete(acb
->bh
);
3783 qemu_aio_release(acb
);
3786 static BlockDriverAIOCB
*bdrv_aio_rw_vector(BlockDriverState
*bs
,
3790 BlockDriverCompletionFunc
*cb
,
3795 BlockDriverAIOCBSync
*acb
;
3797 acb
= qemu_aio_get(&bdrv_em_aiocb_info
, bs
, cb
, opaque
);
3798 acb
->is_write
= is_write
;
3800 acb
->bounce
= qemu_blockalign(bs
, qiov
->size
);
3801 acb
->bh
= qemu_bh_new(bdrv_aio_bh_cb
, acb
);
3804 qemu_iovec_to_buf(acb
->qiov
, 0, acb
->bounce
, qiov
->size
);
3805 acb
->ret
= bs
->drv
->bdrv_write(bs
, sector_num
, acb
->bounce
, nb_sectors
);
3807 acb
->ret
= bs
->drv
->bdrv_read(bs
, sector_num
, acb
->bounce
, nb_sectors
);
3810 qemu_bh_schedule(acb
->bh
);
3812 return &acb
->common
;
3815 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
3816 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
3817 BlockDriverCompletionFunc
*cb
, void *opaque
)
3819 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 0);
3822 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
3823 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
3824 BlockDriverCompletionFunc
*cb
, void *opaque
)
3826 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 1);
3830 typedef struct BlockDriverAIOCBCoroutine
{
3831 BlockDriverAIOCB common
;
3836 } BlockDriverAIOCBCoroutine
;
3838 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB
*blockacb
)
3840 BlockDriverAIOCBCoroutine
*acb
=
3841 container_of(blockacb
, BlockDriverAIOCBCoroutine
, common
);
3850 static const AIOCBInfo bdrv_em_co_aiocb_info
= {
3851 .aiocb_size
= sizeof(BlockDriverAIOCBCoroutine
),
3852 .cancel
= bdrv_aio_co_cancel_em
,
3855 static void bdrv_co_em_bh(void *opaque
)
3857 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3859 acb
->common
.cb(acb
->common
.opaque
, acb
->req
.error
);
3865 qemu_bh_delete(acb
->bh
);
3866 qemu_aio_release(acb
);
3869 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
3870 static void coroutine_fn
bdrv_co_do_rw(void *opaque
)
3872 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3873 BlockDriverState
*bs
= acb
->common
.bs
;
3875 if (!acb
->is_write
) {
3876 acb
->req
.error
= bdrv_co_do_readv(bs
, acb
->req
.sector
,
3877 acb
->req
.nb_sectors
, acb
->req
.qiov
, 0);
3879 acb
->req
.error
= bdrv_co_do_writev(bs
, acb
->req
.sector
,
3880 acb
->req
.nb_sectors
, acb
->req
.qiov
, 0);
3883 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
3884 qemu_bh_schedule(acb
->bh
);
3887 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
3891 BlockDriverCompletionFunc
*cb
,
3896 BlockDriverAIOCBCoroutine
*acb
;
3898 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
3899 acb
->req
.sector
= sector_num
;
3900 acb
->req
.nb_sectors
= nb_sectors
;
3901 acb
->req
.qiov
= qiov
;
3902 acb
->is_write
= is_write
;
3905 co
= qemu_coroutine_create(bdrv_co_do_rw
);
3906 qemu_coroutine_enter(co
, acb
);
3908 return &acb
->common
;
3911 static void coroutine_fn
bdrv_aio_flush_co_entry(void *opaque
)
3913 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3914 BlockDriverState
*bs
= acb
->common
.bs
;
3916 acb
->req
.error
= bdrv_co_flush(bs
);
3917 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
3918 qemu_bh_schedule(acb
->bh
);
3921 BlockDriverAIOCB
*bdrv_aio_flush(BlockDriverState
*bs
,
3922 BlockDriverCompletionFunc
*cb
, void *opaque
)
3924 trace_bdrv_aio_flush(bs
, opaque
);
3927 BlockDriverAIOCBCoroutine
*acb
;
3929 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
3932 co
= qemu_coroutine_create(bdrv_aio_flush_co_entry
);
3933 qemu_coroutine_enter(co
, acb
);
3935 return &acb
->common
;
3938 static void coroutine_fn
bdrv_aio_discard_co_entry(void *opaque
)
3940 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3941 BlockDriverState
*bs
= acb
->common
.bs
;
3943 acb
->req
.error
= bdrv_co_discard(bs
, acb
->req
.sector
, acb
->req
.nb_sectors
);
3944 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
3945 qemu_bh_schedule(acb
->bh
);
3948 BlockDriverAIOCB
*bdrv_aio_discard(BlockDriverState
*bs
,
3949 int64_t sector_num
, int nb_sectors
,
3950 BlockDriverCompletionFunc
*cb
, void *opaque
)
3953 BlockDriverAIOCBCoroutine
*acb
;
3955 trace_bdrv_aio_discard(bs
, sector_num
, nb_sectors
, opaque
);
3957 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
3958 acb
->req
.sector
= sector_num
;
3959 acb
->req
.nb_sectors
= nb_sectors
;
3961 co
= qemu_coroutine_create(bdrv_aio_discard_co_entry
);
3962 qemu_coroutine_enter(co
, acb
);
3964 return &acb
->common
;
3967 void bdrv_init(void)
3969 module_call_init(MODULE_INIT_BLOCK
);
3972 void bdrv_init_with_whitelist(void)
3974 use_bdrv_whitelist
= 1;
3978 void *qemu_aio_get(const AIOCBInfo
*aiocb_info
, BlockDriverState
*bs
,
3979 BlockDriverCompletionFunc
*cb
, void *opaque
)
3981 BlockDriverAIOCB
*acb
;
3983 acb
= g_slice_alloc(aiocb_info
->aiocb_size
);
3984 acb
->aiocb_info
= aiocb_info
;
3987 acb
->opaque
= opaque
;
3991 void qemu_aio_release(void *p
)
3993 BlockDriverAIOCB
*acb
= p
;
3994 g_slice_free1(acb
->aiocb_info
->aiocb_size
, acb
);
3997 /**************************************************************/
3998 /* Coroutine block device emulation */
4000 typedef struct CoroutineIOCompletion
{
4001 Coroutine
*coroutine
;
4003 } CoroutineIOCompletion
;
4005 static void bdrv_co_io_em_complete(void *opaque
, int ret
)
4007 CoroutineIOCompletion
*co
= opaque
;
4010 qemu_coroutine_enter(co
->coroutine
, NULL
);
4013 static int coroutine_fn
bdrv_co_io_em(BlockDriverState
*bs
, int64_t sector_num
,
4014 int nb_sectors
, QEMUIOVector
*iov
,
4017 CoroutineIOCompletion co
= {
4018 .coroutine
= qemu_coroutine_self(),
4020 BlockDriverAIOCB
*acb
;
4023 acb
= bs
->drv
->bdrv_aio_writev(bs
, sector_num
, iov
, nb_sectors
,
4024 bdrv_co_io_em_complete
, &co
);
4026 acb
= bs
->drv
->bdrv_aio_readv(bs
, sector_num
, iov
, nb_sectors
,
4027 bdrv_co_io_em_complete
, &co
);
4030 trace_bdrv_co_io_em(bs
, sector_num
, nb_sectors
, is_write
, acb
);
4034 qemu_coroutine_yield();
4039 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
4040 int64_t sector_num
, int nb_sectors
,
4043 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, false);
4046 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
4047 int64_t sector_num
, int nb_sectors
,
4050 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, true);
4053 static void coroutine_fn
bdrv_flush_co_entry(void *opaque
)
4055 RwCo
*rwco
= opaque
;
4057 rwco
->ret
= bdrv_co_flush(rwco
->bs
);
4060 int coroutine_fn
bdrv_co_flush(BlockDriverState
*bs
)
4064 if (!bs
|| !bdrv_is_inserted(bs
) || bdrv_is_read_only(bs
)) {
4068 /* Write back cached data to the OS even with cache=unsafe */
4069 if (bs
->drv
->bdrv_co_flush_to_os
) {
4070 ret
= bs
->drv
->bdrv_co_flush_to_os(bs
);
4076 /* But don't actually force it to the disk with cache=unsafe */
4077 if (bs
->open_flags
& BDRV_O_NO_FLUSH
) {
4081 if (bs
->drv
->bdrv_co_flush_to_disk
) {
4082 ret
= bs
->drv
->bdrv_co_flush_to_disk(bs
);
4083 } else if (bs
->drv
->bdrv_aio_flush
) {
4084 BlockDriverAIOCB
*acb
;
4085 CoroutineIOCompletion co
= {
4086 .coroutine
= qemu_coroutine_self(),
4089 acb
= bs
->drv
->bdrv_aio_flush(bs
, bdrv_co_io_em_complete
, &co
);
4093 qemu_coroutine_yield();
4098 * Some block drivers always operate in either writethrough or unsafe
4099 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4100 * know how the server works (because the behaviour is hardcoded or
4101 * depends on server-side configuration), so we can't ensure that
4102 * everything is safe on disk. Returning an error doesn't work because
4103 * that would break guests even if the server operates in writethrough
4106 * Let's hope the user knows what he's doing.
4114 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4115 * in the case of cache=unsafe, so there are no useless flushes.
4118 return bdrv_co_flush(bs
->file
);
4121 void bdrv_invalidate_cache(BlockDriverState
*bs
)
4123 if (bs
->drv
&& bs
->drv
->bdrv_invalidate_cache
) {
4124 bs
->drv
->bdrv_invalidate_cache(bs
);
4128 void bdrv_invalidate_cache_all(void)
4130 BlockDriverState
*bs
;
4132 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
4133 bdrv_invalidate_cache(bs
);
4137 void bdrv_clear_incoming_migration_all(void)
4139 BlockDriverState
*bs
;
4141 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
4142 bs
->open_flags
= bs
->open_flags
& ~(BDRV_O_INCOMING
);
4146 int bdrv_flush(BlockDriverState
*bs
)
4154 if (qemu_in_coroutine()) {
4155 /* Fast-path if already in coroutine context */
4156 bdrv_flush_co_entry(&rwco
);
4158 co
= qemu_coroutine_create(bdrv_flush_co_entry
);
4159 qemu_coroutine_enter(co
, &rwco
);
4160 while (rwco
.ret
== NOT_DONE
) {
4168 static void coroutine_fn
bdrv_discard_co_entry(void *opaque
)
4170 RwCo
*rwco
= opaque
;
4172 rwco
->ret
= bdrv_co_discard(rwco
->bs
, rwco
->sector_num
, rwco
->nb_sectors
);
4175 int coroutine_fn
bdrv_co_discard(BlockDriverState
*bs
, int64_t sector_num
,
4180 } else if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
4182 } else if (bs
->read_only
) {
4186 if (bs
->dirty_bitmap
) {
4187 bdrv_reset_dirty(bs
, sector_num
, nb_sectors
);
4190 if (bs
->drv
->bdrv_co_discard
) {
4191 return bs
->drv
->bdrv_co_discard(bs
, sector_num
, nb_sectors
);
4192 } else if (bs
->drv
->bdrv_aio_discard
) {
4193 BlockDriverAIOCB
*acb
;
4194 CoroutineIOCompletion co
= {
4195 .coroutine
= qemu_coroutine_self(),
4198 acb
= bs
->drv
->bdrv_aio_discard(bs
, sector_num
, nb_sectors
,
4199 bdrv_co_io_em_complete
, &co
);
4203 qemu_coroutine_yield();
4211 int bdrv_discard(BlockDriverState
*bs
, int64_t sector_num
, int nb_sectors
)
4216 .sector_num
= sector_num
,
4217 .nb_sectors
= nb_sectors
,
4221 if (qemu_in_coroutine()) {
4222 /* Fast-path if already in coroutine context */
4223 bdrv_discard_co_entry(&rwco
);
4225 co
= qemu_coroutine_create(bdrv_discard_co_entry
);
4226 qemu_coroutine_enter(co
, &rwco
);
4227 while (rwco
.ret
== NOT_DONE
) {
4235 /**************************************************************/
4236 /* removable device support */
4239 * Return TRUE if the media is present
4241 int bdrv_is_inserted(BlockDriverState
*bs
)
4243 BlockDriver
*drv
= bs
->drv
;
4247 if (!drv
->bdrv_is_inserted
)
4249 return drv
->bdrv_is_inserted(bs
);
4253 * Return whether the media changed since the last call to this
4254 * function, or -ENOTSUP if we don't know. Most drivers don't know.
4256 int bdrv_media_changed(BlockDriverState
*bs
)
4258 BlockDriver
*drv
= bs
->drv
;
4260 if (drv
&& drv
->bdrv_media_changed
) {
4261 return drv
->bdrv_media_changed(bs
);
4267 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
4269 void bdrv_eject(BlockDriverState
*bs
, bool eject_flag
)
4271 BlockDriver
*drv
= bs
->drv
;
4273 if (drv
&& drv
->bdrv_eject
) {
4274 drv
->bdrv_eject(bs
, eject_flag
);
4277 if (bs
->device_name
[0] != '\0') {
4278 bdrv_emit_qmp_eject_event(bs
, eject_flag
);
4283 * Lock or unlock the media (if it is locked, the user won't be able
4284 * to eject it manually).
4286 void bdrv_lock_medium(BlockDriverState
*bs
, bool locked
)
4288 BlockDriver
*drv
= bs
->drv
;
4290 trace_bdrv_lock_medium(bs
, locked
);
4292 if (drv
&& drv
->bdrv_lock_medium
) {
4293 drv
->bdrv_lock_medium(bs
, locked
);
4297 /* needed for generic scsi interface */
4299 int bdrv_ioctl(BlockDriverState
*bs
, unsigned long int req
, void *buf
)
4301 BlockDriver
*drv
= bs
->drv
;
4303 if (drv
&& drv
->bdrv_ioctl
)
4304 return drv
->bdrv_ioctl(bs
, req
, buf
);
4308 BlockDriverAIOCB
*bdrv_aio_ioctl(BlockDriverState
*bs
,
4309 unsigned long int req
, void *buf
,
4310 BlockDriverCompletionFunc
*cb
, void *opaque
)
4312 BlockDriver
*drv
= bs
->drv
;
4314 if (drv
&& drv
->bdrv_aio_ioctl
)
4315 return drv
->bdrv_aio_ioctl(bs
, req
, buf
, cb
, opaque
);
4319 void bdrv_set_buffer_alignment(BlockDriverState
*bs
, int align
)
4321 bs
->buffer_alignment
= align
;
4324 void *qemu_blockalign(BlockDriverState
*bs
, size_t size
)
4326 return qemu_memalign((bs
&& bs
->buffer_alignment
) ? bs
->buffer_alignment
: 512, size
);
4330 * Check if all memory in this vector is sector aligned.
4332 bool bdrv_qiov_is_aligned(BlockDriverState
*bs
, QEMUIOVector
*qiov
)
4336 for (i
= 0; i
< qiov
->niov
; i
++) {
4337 if ((uintptr_t) qiov
->iov
[i
].iov_base
% bs
->buffer_alignment
) {
4345 void bdrv_set_dirty_tracking(BlockDriverState
*bs
, int granularity
)
4347 int64_t bitmap_size
;
4349 assert((granularity
& (granularity
- 1)) == 0);
4352 granularity
>>= BDRV_SECTOR_BITS
;
4353 assert(!bs
->dirty_bitmap
);
4354 bitmap_size
= (bdrv_getlength(bs
) >> BDRV_SECTOR_BITS
);
4355 bs
->dirty_bitmap
= hbitmap_alloc(bitmap_size
, ffs(granularity
) - 1);
4357 if (bs
->dirty_bitmap
) {
4358 hbitmap_free(bs
->dirty_bitmap
);
4359 bs
->dirty_bitmap
= NULL
;
4364 int bdrv_get_dirty(BlockDriverState
*bs
, int64_t sector
)
4366 if (bs
->dirty_bitmap
) {
4367 return hbitmap_get(bs
->dirty_bitmap
, sector
);
4373 void bdrv_dirty_iter_init(BlockDriverState
*bs
, HBitmapIter
*hbi
)
4375 hbitmap_iter_init(hbi
, bs
->dirty_bitmap
, 0);
4378 void bdrv_set_dirty(BlockDriverState
*bs
, int64_t cur_sector
,
4381 hbitmap_set(bs
->dirty_bitmap
, cur_sector
, nr_sectors
);
4384 void bdrv_reset_dirty(BlockDriverState
*bs
, int64_t cur_sector
,
4387 hbitmap_reset(bs
->dirty_bitmap
, cur_sector
, nr_sectors
);
4390 int64_t bdrv_get_dirty_count(BlockDriverState
*bs
)
4392 if (bs
->dirty_bitmap
) {
4393 return hbitmap_count(bs
->dirty_bitmap
);
4399 void bdrv_set_in_use(BlockDriverState
*bs
, int in_use
)
4401 assert(bs
->in_use
!= in_use
);
4402 bs
->in_use
= in_use
;
4405 int bdrv_in_use(BlockDriverState
*bs
)
4410 void bdrv_iostatus_enable(BlockDriverState
*bs
)
4412 bs
->iostatus_enabled
= true;
4413 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
4416 /* The I/O status is only enabled if the drive explicitly
4417 * enables it _and_ the VM is configured to stop on errors */
4418 bool bdrv_iostatus_is_enabled(const BlockDriverState
*bs
)
4420 return (bs
->iostatus_enabled
&&
4421 (bs
->on_write_error
== BLOCKDEV_ON_ERROR_ENOSPC
||
4422 bs
->on_write_error
== BLOCKDEV_ON_ERROR_STOP
||
4423 bs
->on_read_error
== BLOCKDEV_ON_ERROR_STOP
));
4426 void bdrv_iostatus_disable(BlockDriverState
*bs
)
4428 bs
->iostatus_enabled
= false;
4431 void bdrv_iostatus_reset(BlockDriverState
*bs
)
4433 if (bdrv_iostatus_is_enabled(bs
)) {
4434 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
4436 block_job_iostatus_reset(bs
->job
);
4441 void bdrv_iostatus_set_err(BlockDriverState
*bs
, int error
)
4443 assert(bdrv_iostatus_is_enabled(bs
));
4444 if (bs
->iostatus
== BLOCK_DEVICE_IO_STATUS_OK
) {
4445 bs
->iostatus
= error
== ENOSPC
? BLOCK_DEVICE_IO_STATUS_NOSPACE
:
4446 BLOCK_DEVICE_IO_STATUS_FAILED
;
4451 bdrv_acct_start(BlockDriverState
*bs
, BlockAcctCookie
*cookie
, int64_t bytes
,
4452 enum BlockAcctType type
)
4454 assert(type
< BDRV_MAX_IOTYPE
);
4456 cookie
->bytes
= bytes
;
4457 cookie
->start_time_ns
= get_clock();
4458 cookie
->type
= type
;
4462 bdrv_acct_done(BlockDriverState
*bs
, BlockAcctCookie
*cookie
)
4464 assert(cookie
->type
< BDRV_MAX_IOTYPE
);
4466 bs
->nr_bytes
[cookie
->type
] += cookie
->bytes
;
4467 bs
->nr_ops
[cookie
->type
]++;
4468 bs
->total_time_ns
[cookie
->type
] += get_clock() - cookie
->start_time_ns
;
4471 void bdrv_img_create(const char *filename
, const char *fmt
,
4472 const char *base_filename
, const char *base_fmt
,
4473 char *options
, uint64_t img_size
, int flags
,
4474 Error
**errp
, bool quiet
)
4476 QEMUOptionParameter
*param
= NULL
, *create_options
= NULL
;
4477 QEMUOptionParameter
*backing_fmt
, *backing_file
, *size
;
4478 BlockDriverState
*bs
= NULL
;
4479 BlockDriver
*drv
, *proto_drv
;
4480 BlockDriver
*backing_drv
= NULL
;
4483 /* Find driver and parse its options */
4484 drv
= bdrv_find_format(fmt
);
4486 error_setg(errp
, "Unknown file format '%s'", fmt
);
4490 proto_drv
= bdrv_find_protocol(filename
);
4492 error_setg(errp
, "Unknown protocol '%s'", filename
);
4496 create_options
= append_option_parameters(create_options
,
4497 drv
->create_options
);
4498 create_options
= append_option_parameters(create_options
,
4499 proto_drv
->create_options
);
4501 /* Create parameter list with default values */
4502 param
= parse_option_parameters("", create_options
, param
);
4504 set_option_parameter_int(param
, BLOCK_OPT_SIZE
, img_size
);
4506 /* Parse -o options */
4508 param
= parse_option_parameters(options
, create_options
, param
);
4509 if (param
== NULL
) {
4510 error_setg(errp
, "Invalid options for file format '%s'.", fmt
);
4515 if (base_filename
) {
4516 if (set_option_parameter(param
, BLOCK_OPT_BACKING_FILE
,
4518 error_setg(errp
, "Backing file not supported for file format '%s'",
4525 if (set_option_parameter(param
, BLOCK_OPT_BACKING_FMT
, base_fmt
)) {
4526 error_setg(errp
, "Backing file format not supported for file "
4527 "format '%s'", fmt
);
4532 backing_file
= get_option_parameter(param
, BLOCK_OPT_BACKING_FILE
);
4533 if (backing_file
&& backing_file
->value
.s
) {
4534 if (!strcmp(filename
, backing_file
->value
.s
)) {
4535 error_setg(errp
, "Error: Trying to create an image with the "
4536 "same filename as the backing file");
4541 backing_fmt
= get_option_parameter(param
, BLOCK_OPT_BACKING_FMT
);
4542 if (backing_fmt
&& backing_fmt
->value
.s
) {
4543 backing_drv
= bdrv_find_format(backing_fmt
->value
.s
);
4545 error_setg(errp
, "Unknown backing file format '%s'",
4546 backing_fmt
->value
.s
);
4551 // The size for the image must always be specified, with one exception:
4552 // If we are using a backing file, we can obtain the size from there
4553 size
= get_option_parameter(param
, BLOCK_OPT_SIZE
);
4554 if (size
&& size
->value
.n
== -1) {
4555 if (backing_file
&& backing_file
->value
.s
) {
4560 /* backing files always opened read-only */
4562 flags
& ~(BDRV_O_RDWR
| BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
4566 ret
= bdrv_open(bs
, backing_file
->value
.s
, back_flags
, backing_drv
);
4568 error_setg_errno(errp
, -ret
, "Could not open '%s'",
4569 backing_file
->value
.s
);
4572 bdrv_get_geometry(bs
, &size
);
4575 snprintf(buf
, sizeof(buf
), "%" PRId64
, size
);
4576 set_option_parameter(param
, BLOCK_OPT_SIZE
, buf
);
4578 error_setg(errp
, "Image creation needs a size parameter");
4584 printf("Formatting '%s', fmt=%s ", filename
, fmt
);
4585 print_option_parameters(param
);
4588 ret
= bdrv_create(drv
, filename
, param
);
4590 if (ret
== -ENOTSUP
) {
4591 error_setg(errp
,"Formatting or formatting option not supported for "
4592 "file format '%s'", fmt
);
4593 } else if (ret
== -EFBIG
) {
4594 error_setg(errp
, "The image size is too large for file format '%s'",
4597 error_setg(errp
, "%s: error while creating %s: %s", filename
, fmt
,
4603 free_option_parameters(create_options
);
4604 free_option_parameters(param
);