3 # Test command line configuration of block devices and driver-specific options
5 # Copyright (C) 2013 Red Hat, Inc.
7 # This program is free software; you can redistribute it and/or modify
8 # it under the terms of the GNU General Public License as published by
9 # the Free Software Foundation; either version 2 of the License, or
10 # (at your option) any later version.
12 # This program is distributed in the hope that it will be useful,
13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 # GNU General Public License for more details.
17 # You should have received a copy of the GNU General Public License
18 # along with this program. If not, see <http://www.gnu.org/licenses/>.
22 owner
=kwolf@redhat.com
25 echo "QA output created by $seq"
29 status
=1 # failure is the default!
35 trap "_cleanup; exit \$status" 0 1 2 3 15
37 # get standard environment, filters and checks
44 # A compat=0.10 image is created in this test which does not support anything
45 # other than refcount_bits=16
46 _unsupported_imgopts
'refcount_bits=\([^1]\|.\([^6]\|$\)\)'
48 function do_run_qemu
()
58 ) |
$QEMU -nographic -monitor stdio
-serial none
"$@"
64 do_run_qemu
"$@" 2>&1 | _filter_testdir | _filter_qemu | _filter_generated_node_ids
71 cp "$TEST_IMG" "$TEST_IMG.orig"
72 mv "$TEST_IMG" "$TEST_IMG.base"
73 _make_test_img
-b "$TEST_IMG.base" $size
76 echo === Unknown option
===
79 run_qemu
-drive file="$TEST_IMG",format
=qcow2
,unknown_opt
=,if=none
,id
=$device_id
80 run_qemu
-drive file="$TEST_IMG",format
=qcow2
,unknown_opt
=on
,if=none
,id
=$device_id
81 run_qemu
-drive file="$TEST_IMG",format
=qcow2
,unknown_opt
=1234,if=none
,id
=$device_id
82 run_qemu
-drive file="$TEST_IMG",format
=qcow2
,unknown_opt
=foo
,if=none
,id
=$device_id
85 echo === Unknown protocol option
===
88 run_qemu
-drive file="$TEST_IMG",format
=qcow2
,file.unknown_opt
=
89 run_qemu
-drive file="$TEST_IMG",format
=qcow2
,file.unknown_opt
=on
90 run_qemu
-drive file="$TEST_IMG",format
=qcow2
,file.unknown_opt
=1234
91 run_qemu
-drive file="$TEST_IMG",format
=qcow2
,file.unknown_opt
=foo
94 echo === Invalid format
===
97 run_qemu
-drive file="$TEST_IMG",format
=foo
98 run_qemu
-drive file="$TEST_IMG",driver
=foo
99 run_qemu
-drive file="$TEST_IMG",driver
=raw
,format
=qcow2
100 run_qemu
-drive file="$TEST_IMG",driver
=qcow2
,format
=qcow2
103 echo === Device without drive
===
106 run_qemu
-device virtio-scsi-pci
-device scsi-hd
109 echo === Overriding backing
file ===
112 echo "info block" | run_qemu
-drive file="$TEST_IMG",driver
=qcow2
,backing.
file.filename
="$TEST_IMG.orig",if=none
,id
=$device_id -nodefaults\
113 | _filter_generated_node_ids
115 # Drivers that don't support backing files
116 run_qemu
-drive file="$TEST_IMG",driver
=raw
,backing.
file.filename
="$TEST_IMG.orig"
117 run_qemu
-drive file="$TEST_IMG",file.backing.driver
=file,file.backing.filename
="$TEST_IMG.orig"
118 run_qemu
-drive file="$TEST_IMG",file.backing.driver
=qcow2
,file.backing.
file.filename
="$TEST_IMG.orig"
121 echo === Enable and disable lazy refcounting on the
command line
, plus some invalid values
===
124 run_qemu
-drive file="$TEST_IMG",format
=qcow2
,lazy-refcounts
=on
125 run_qemu
-drive file="$TEST_IMG",format
=qcow2
,lazy-refcounts
=off
126 run_qemu
-drive file="$TEST_IMG",format
=qcow2
,lazy-refcounts
=
127 run_qemu
-drive file="$TEST_IMG",format
=qcow2
,lazy-refcounts
=42
128 run_qemu
-drive file="$TEST_IMG",format
=qcow2
,lazy-refcounts
=foo
132 echo === With version
2 images enabling lazy refcounts must fail
===
135 _make_test_img
-ocompat=0.10 $size
137 run_qemu
-drive file="$TEST_IMG",format
=qcow2
,lazy-refcounts
=on
138 run_qemu
-drive file="$TEST_IMG",format
=qcow2
,lazy-refcounts
=off
141 echo === No medium
===
144 case "$QEMU_DEFAULT_MACHINE" in
146 run_qemu
-drive if=floppy
147 run_qemu
-drive if=ide
,media
=cdrom
148 run_qemu
-drive if=scsi
,media
=cdrom
149 run_qemu
-drive if=ide
150 run_qemu
-drive if=scsi
156 run_qemu
-drive if=virtio
158 case "$QEMU_DEFAULT_MACHINE" in
160 run_qemu
-drive if=none
,id
=disk
-device ide-cd
,drive
=disk
161 run_qemu
-drive if=none
,id
=disk
-device lsi53c895a
-device scsi-cd
,drive
=disk
162 run_qemu
-drive if=none
,id
=disk
-device ide-drive
,drive
=disk
163 run_qemu
-drive if=none
,id
=disk
-device ide-hd
,drive
=disk
164 run_qemu
-drive if=none
,id
=disk
-device lsi53c895a
-device scsi-disk
,drive
=disk
165 run_qemu
-drive if=none
,id
=disk
-device lsi53c895a
-device scsi-hd
,drive
=disk
172 echo === Read-only
===
175 case "$QEMU_DEFAULT_MACHINE" in
177 run_qemu
-drive file="$TEST_IMG",if=floppy
,readonly=on
178 run_qemu
-drive file="$TEST_IMG",if=ide
,media
=cdrom
,readonly=on
179 run_qemu
-drive file="$TEST_IMG",if=scsi
,media
=cdrom
,readonly=on
180 run_qemu
-drive file="$TEST_IMG",if=ide
,readonly=on
181 run_qemu
-drive file="$TEST_IMG",if=scsi
,readonly=on
187 run_qemu
-drive file="$TEST_IMG",if=virtio
,readonly=on
189 case "$QEMU_DEFAULT_MACHINE" in
191 run_qemu
-drive file="$TEST_IMG",if=none
,id
=disk
,readonly=on
-device ide-cd
,drive
=disk
192 run_qemu
-drive file="$TEST_IMG",if=none
,id
=disk
,readonly=on
-device lsi53c895a
-device scsi-cd
,drive
=disk
193 run_qemu
-drive file="$TEST_IMG",if=none
,id
=disk
,readonly=on
-device ide-drive
,drive
=disk
194 run_qemu
-drive file="$TEST_IMG",if=none
,id
=disk
,readonly=on
-device ide-hd
,drive
=disk
195 run_qemu
-drive file="$TEST_IMG",if=none
,id
=disk
,readonly=on
-device lsi53c895a
-device scsi-disk
,drive
=disk
196 run_qemu
-drive file="$TEST_IMG",if=none
,id
=disk
,readonly=on
-device lsi53c895a
-device scsi-hd
,drive
=disk
203 echo === Cache modes
===
206 # Cannot use the test image because cache=none might not work on the host FS
207 # Use cdrom so that we won't get errors about missing media
209 run_qemu
-drive driver
=null-co
,cache
=none
210 run_qemu
-drive driver
=null-co
,cache
=directsync
211 run_qemu
-drive driver
=null-co
,cache
=writeback
212 run_qemu
-drive driver
=null-co
,cache
=writethrough
213 run_qemu
-drive driver
=null-co
,cache
=unsafe
214 run_qemu
-drive driver
=null-co
,cache
=invalid_value
216 # Can't test direct=on here because O_DIRECT might not be supported on this FS
217 # Test 142 checks the direct=on cases
219 for cache
in writeback writethrough unsafe invalid_value
; do
220 echo -e "info block\ninfo block file\ninfo block backing\ninfo block backing-file" | \
221 run_qemu
-drive file="$TEST_IMG",cache
=$cache,backing.
file.filename
="$TEST_IMG.base",backing.cache.no-flush
=on
,backing.cache.writeback
=on
,backing.node-name
=backing
,backing.
file.node-name
=backing-file
,file.node-name
=file,if=none
,id
=$device_id -nodefaults
225 echo === Specifying the protocol layer
===
228 run_qemu
-drive file="$TEST_IMG",file.driver
=file
231 echo === Leaving out required options
===
234 run_qemu
-drive driver
=file
235 run_qemu
-drive driver
=nbd
236 run_qemu
-drive driver
=raw
237 run_qemu
-drive file.driver
=file
238 run_qemu
-drive file.driver
=nbd
239 run_qemu
-drive file.driver
=raw
240 run_qemu
-drive foo
=bar
243 echo === Specifying both an option and its legacy
alias ===
246 run_qemu
-drive file="$TEST_IMG",iops
=1234,throttling.iops-total
=5678
247 run_qemu
-drive file="$TEST_IMG",iops_rd
=1234,throttling.iops-read
=5678
248 run_qemu
-drive file="$TEST_IMG",iops_wr
=1234,throttling.iops-write
=5678
250 run_qemu
-drive file="$TEST_IMG",bps
=1234,throttling.bps-total
=5678
251 run_qemu
-drive file="$TEST_IMG",bps_rd
=1234,throttling.bps-read
=5678
252 run_qemu
-drive file="$TEST_IMG",bps_wr
=1234,throttling.bps-write
=5678
254 run_qemu
-drive file="$TEST_IMG",iops_max
=1234,throttling.iops-total-max
=5678
255 run_qemu
-drive file="$TEST_IMG",iops_rd_max
=1234,throttling.iops-read-max
=5678
256 run_qemu
-drive file="$TEST_IMG",iops_wr_max
=1234,throttling.iops-write-max
=5678
258 run_qemu
-drive file="$TEST_IMG",bps_max
=1234,throttling.bps-total-max
=5678
259 run_qemu
-drive file="$TEST_IMG",bps_rd_max
=1234,throttling.bps-read-max
=5678
260 run_qemu
-drive file="$TEST_IMG",bps_wr_max
=1234,throttling.bps-write-max
=5678
262 run_qemu
-drive file="$TEST_IMG",iops_size
=1234,throttling.iops-size
=5678
263 run_qemu
-drive file="$TEST_IMG",readonly=on
,read-only
=off
266 echo === Parsing protocol from
file name
===
269 # Protocol strings are supposed to be parsed from traditional option strings,
270 # but not when using driver-specific options. We can distinguish them by the
271 # error message for non-existing files.
273 run_qemu
-hda foo
:bar
274 run_qemu
-drive file=foo
:bar
275 run_qemu
-drive file.filename
=foo
:bar
277 run_qemu
-hda "file:$TEST_IMG"
278 run_qemu
-drive file="file:$TEST_IMG"
279 run_qemu
-drive file.filename
="file:$TEST_IMG"
282 echo === Snapshot mode
===
285 $QEMU_IO -c "write -P 0x11 0 4k" "$TEST_IMG" | _filter_qemu_io
288 echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu
-drive file="$TEST_IMG",if=none
,id
=$device_id -snapshot | _filter_qemu_io
289 echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu
-drive file="$TEST_IMG",snapshot
=on
,if=none
,id
=$device_id | _filter_qemu_io
290 echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu
-drive file.filename
="$TEST_IMG",driver
=qcow2
,snapshot
=on
,if=none
,id
=$device_id\
292 echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu
-drive file.filename
="$TEST_IMG",driver
=qcow2
,if=none
,id
=$device_id -snapshot\
294 echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu
-drive file="file:$TEST_IMG",if=none
,id
=$device_id -snapshot | _filter_qemu_io
295 echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu
-drive file="file:$TEST_IMG",snapshot
=on
,if=none
,id
=$device_id | _filter_qemu_io
297 # Opening a read-only file r/w with snapshot=on
298 chmod u-w
"$TEST_IMG"
299 echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu
-drive file="$TEST_IMG",if=none
,id
=$device_id -snapshot | _filter_qemu_io
300 echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu
-drive file="$TEST_IMG",snapshot
=on
,if=none
,id
=$device_id | _filter_qemu_io
301 chmod u
+w
"$TEST_IMG"
303 $QEMU_IO -c "read -P 0x11 0 4k" "$TEST_IMG" | _filter_qemu_io
305 echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu
-drive file="$TEST_IMG",snapshot
=off
,if=none
,id
=$device_id | _filter_qemu_io
307 $QEMU_IO -c "read -P 0x22 0 4k" "$TEST_IMG" | _filter_qemu_io
309 echo -e "qemu-io $device_id \"write -P 0x33 0 4k\"\ncommit $device_id" | run_qemu
-drive file="$TEST_IMG",snapshot
=on
,if=none
,id
=$device_id\
312 $QEMU_IO -c "read -P 0x33 0 4k" "$TEST_IMG" | _filter_qemu_io