hw/arm_sysctl.c

   1 /*
   2  * Status and system control registers for ARM RealView/Versatile boards.
   3  *
   4  * Copyright (c) 2006-2007 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licensed under the GPL.
   8  */
   9
  10 #include "hw.h"
  11 #include "qemu-timer.h"
  12 #include "sysbus.h"
  13 #include "primecell.h"
  14 #include "sysemu.h"
  15
  16 #define LOCK_VALUE 0xa05f
  17
  18 typedef struct {
  19     SysBusDevice busdev;
  20     MemoryRegion iomem;
  21     qemu_irq pl110_mux_ctrl;
  22
  23     uint32_t sys_id;
  24     uint32_t leds;
  25     uint16_t lockval;
  26     uint32_t cfgdata1;
  27     uint32_t cfgdata2;
  28     uint32_t flags;
  29     uint32_t nvflags;
  30     uint32_t resetlevel;
  31     uint32_t proc_id;
  32     uint32_t sys_mci;
  33     uint32_t sys_cfgdata;
  34     uint32_t sys_cfgctrl;
  35     uint32_t sys_cfgstat;
  36     uint32_t sys_clcd;
  37 } arm_sysctl_state;
  38
  39 static const VMStateDescription vmstate_arm_sysctl = {
  40     .name = "realview_sysctl",
  41     .version_id = 3,
  42     .minimum_version_id = 1,
  43     .fields = (VMStateField[]) {
  44         VMSTATE_UINT32(leds, arm_sysctl_state),
  45         VMSTATE_UINT16(lockval, arm_sysctl_state),
  46         VMSTATE_UINT32(cfgdata1, arm_sysctl_state),
  47         VMSTATE_UINT32(cfgdata2, arm_sysctl_state),
  48         VMSTATE_UINT32(flags, arm_sysctl_state),
  49         VMSTATE_UINT32(nvflags, arm_sysctl_state),
  50         VMSTATE_UINT32(resetlevel, arm_sysctl_state),
  51         VMSTATE_UINT32_V(sys_mci, arm_sysctl_state, 2),
  52         VMSTATE_UINT32_V(sys_cfgdata, arm_sysctl_state, 2),
  53         VMSTATE_UINT32_V(sys_cfgctrl, arm_sysctl_state, 2),
  54         VMSTATE_UINT32_V(sys_cfgstat, arm_sysctl_state, 2),
  55         VMSTATE_UINT32_V(sys_clcd, arm_sysctl_state, 3),
  56         VMSTATE_END_OF_LIST()
  57     }
  58 };
  59
  60 /* The PB926 actually uses a different format for
  61  * its SYS_ID register. Fortunately the bits which are
  62  * board type on later boards are distinct.
  63  */
  64 #define BOARD_ID_PB926 0x100
  65 #define BOARD_ID_EB 0x140
  66 #define BOARD_ID_PBA8 0x178
  67 #define BOARD_ID_PBX 0x182
  68 #define BOARD_ID_VEXPRESS 0x190
  69
  70 static int board_id(arm_sysctl_state *s)
  71 {
  72     /* Extract the board ID field from the SYS_ID register value */
  73     return (s->sys_id >> 16) & 0xfff;
  74 }
  75
  76 static void arm_sysctl_reset(DeviceState *d)
  77 {
  78     arm_sysctl_state *s = FROM_SYSBUS(arm_sysctl_state, sysbus_from_qdev(d));
  79
  80     s->leds = 0;
  81     s->lockval = 0;
  82     s->cfgdata1 = 0;
  83     s->cfgdata2 = 0;
  84     s->flags = 0;
  85     s->resetlevel = 0;
  86     if (board_id(s) == BOARD_ID_VEXPRESS) {
  87         /* On VExpress this register will RAZ/WI */
  88         s->sys_clcd = 0;
  89     } else {
  90         /* All others: CLCDID 0x1f, indicating VGA */
  91         s->sys_clcd = 0x1f00;
  92     }
  93 }
  94
  95 static uint64_t arm_sysctl_read(void *opaque, target_phys_addr_t offset,
  96                                 unsigned size)
  97 {
  98     arm_sysctl_state *s = (arm_sysctl_state *)opaque;
  99
 100     switch (offset) {
 101     case 0x00: /* ID */
 102         return s->sys_id;
 103     case 0x04: /* SW */
 104         /* General purpose hardware switches.
 105            We don't have a useful way of exposing these to the user.  */
 106         return 0;
 107     case 0x08: /* LED */
 108         return s->leds;
 109     case 0x20: /* LOCK */
 110         return s->lockval;
 111     case 0x0c: /* OSC0 */
 112     case 0x10: /* OSC1 */
 113     case 0x14: /* OSC2 */
 114     case 0x18: /* OSC3 */
 115     case 0x1c: /* OSC4 */
 116     case 0x24: /* 100HZ */
 117         /* ??? Implement these.  */
 118         return 0;
 119     case 0x28: /* CFGDATA1 */
 120         return s->cfgdata1;
 121     case 0x2c: /* CFGDATA2 */
 122         return s->cfgdata2;
 123     case 0x30: /* FLAGS */
 124         return s->flags;
 125     case 0x38: /* NVFLAGS */
 126         return s->nvflags;
 127     case 0x40: /* RESETCTL */
 128         if (board_id(s) == BOARD_ID_VEXPRESS) {
 129             /* reserved: RAZ/WI */
 130             return 0;
 131         }
 132         return s->resetlevel;
 133     case 0x44: /* PCICTL */
 134         return 1;
 135     case 0x48: /* MCI */
 136         return s->sys_mci;
 137     case 0x4c: /* FLASH */
 138         return 0;
 139     case 0x50: /* CLCD */
 140         return s->sys_clcd;
 141     case 0x54: /* CLCDSER */
 142         return 0;
 143     case 0x58: /* BOOTCS */
 144         return 0;
 145     case 0x5c: /* 24MHz */
 146         return muldiv64(qemu_get_clock_ns(vm_clock), 24000000, get_ticks_per_sec());
 147     case 0x60: /* MISC */
 148         return 0;
 149     case 0x84: /* PROCID0 */
 150         return s->proc_id;
 151     case 0x88: /* PROCID1 */
 152         return 0xff000000;
 153     case 0x64: /* DMAPSR0 */
 154     case 0x68: /* DMAPSR1 */
 155     case 0x6c: /* DMAPSR2 */
 156     case 0x70: /* IOSEL */
 157     case 0x74: /* PLDCTL */
 158     case 0x80: /* BUSID */
 159     case 0x8c: /* OSCRESET0 */
 160     case 0x90: /* OSCRESET1 */
 161     case 0x94: /* OSCRESET2 */
 162     case 0x98: /* OSCRESET3 */
 163     case 0x9c: /* OSCRESET4 */
 164     case 0xc0: /* SYS_TEST_OSC0 */
 165     case 0xc4: /* SYS_TEST_OSC1 */
 166     case 0xc8: /* SYS_TEST_OSC2 */
 167     case 0xcc: /* SYS_TEST_OSC3 */
 168     case 0xd0: /* SYS_TEST_OSC4 */
 169         return 0;
 170     case 0xa0: /* SYS_CFGDATA */
 171         if (board_id(s) != BOARD_ID_VEXPRESS) {
 172             goto bad_reg;
 173         }
 174         return s->sys_cfgdata;
 175     case 0xa4: /* SYS_CFGCTRL */
 176         if (board_id(s) != BOARD_ID_VEXPRESS) {
 177             goto bad_reg;
 178         }
 179         return s->sys_cfgctrl;
 180     case 0xa8: /* SYS_CFGSTAT */
 181         if (board_id(s) != BOARD_ID_VEXPRESS) {
 182             goto bad_reg;
 183         }
 184         return s->sys_cfgstat;
 185     default:
 186     bad_reg:
 187         printf ("arm_sysctl_read: Bad register offset 0x%x\n", (int)offset);
 188         return 0;
 189     }
 190 }
 191
 192 static void arm_sysctl_write(void *opaque, target_phys_addr_t offset,
 193                              uint64_t val, unsigned size)
 194 {
 195     arm_sysctl_state *s = (arm_sysctl_state *)opaque;
 196
 197     switch (offset) {
 198     case 0x08: /* LED */
 199         s->leds = val;
 200     case 0x0c: /* OSC0 */
 201     case 0x10: /* OSC1 */
 202     case 0x14: /* OSC2 */
 203     case 0x18: /* OSC3 */
 204     case 0x1c: /* OSC4 */
 205         /* ??? */
 206         break;
 207     case 0x20: /* LOCK */
 208         if (val == LOCK_VALUE)
 209             s->lockval = val;
 210         else
 211             s->lockval = val & 0x7fff;
 212         break;
 213     case 0x28: /* CFGDATA1 */
 214         /* ??? Need to implement this.  */
 215         s->cfgdata1 = val;
 216         break;
 217     case 0x2c: /* CFGDATA2 */
 218         /* ??? Need to implement this.  */
 219         s->cfgdata2 = val;
 220         break;
 221     case 0x30: /* FLAGSSET */
 222         s->flags |= val;
 223         break;
 224     case 0x34: /* FLAGSCLR */
 225         s->flags &= ~val;
 226         break;
 227     case 0x38: /* NVFLAGSSET */
 228         s->nvflags |= val;
 229         break;
 230     case 0x3c: /* NVFLAGSCLR */
 231         s->nvflags &= ~val;
 232         break;
 233     case 0x40: /* RESETCTL */
 234         switch (board_id(s)) {
 235         case BOARD_ID_PB926:
 236             if (s->lockval == LOCK_VALUE) {
 237                 s->resetlevel = val;
 238                 if (val & 0x100) {
 239                     qemu_system_reset_request();
 240                 }
 241             }
 242             break;
 243         case BOARD_ID_PBX:
 244         case BOARD_ID_PBA8:
 245             if (s->lockval == LOCK_VALUE) {
 246                 s->resetlevel = val;
 247                 if (val & 0x04) {
 248                     qemu_system_reset_request();
 249                 }
 250             }
 251             break;
 252         case BOARD_ID_VEXPRESS:
 253         case BOARD_ID_EB:
 254         default:
 255             /* reserved: RAZ/WI */
 256             break;
 257         }
 258         break;
 259     case 0x44: /* PCICTL */
 260         /* nothing to do.  */
 261         break;
 262     case 0x4c: /* FLASH */
 263         break;
 264     case 0x50: /* CLCD */
 265         switch (board_id(s)) {
 266         case BOARD_ID_PB926:
 267             /* On 926 bits 13:8 are R/O, bits 1:0 control
 268              * the mux that defines how to interpret the PL110
 269              * graphics format, and other bits are r/w but we
 270              * don't implement them to do anything.
 271              */
 272             s->sys_clcd &= 0x3f00;
 273             s->sys_clcd |= val & ~0x3f00;
 274             qemu_set_irq(s->pl110_mux_ctrl, val & 3);
 275             break;
 276         case BOARD_ID_EB:
 277             /* The EB is the same except that there is no mux since
 278              * the EB has a PL111.
 279              */
 280             s->sys_clcd &= 0x3f00;
 281             s->sys_clcd |= val & ~0x3f00;
 282             break;
 283         case BOARD_ID_PBA8:
 284         case BOARD_ID_PBX:
 285             /* On PBA8 and PBX bit 7 is r/w and all other bits
 286              * are either r/o or RAZ/WI.
 287              */
 288             s->sys_clcd &= (1 << 7);
 289             s->sys_clcd |= val & ~(1 << 7);
 290             break;
 291         case BOARD_ID_VEXPRESS:
 292         default:
 293             /* On VExpress this register is unimplemented and will RAZ/WI */
 294             break;
 295         }
 296     case 0x54: /* CLCDSER */
 297     case 0x64: /* DMAPSR0 */
 298     case 0x68: /* DMAPSR1 */
 299     case 0x6c: /* DMAPSR2 */
 300     case 0x70: /* IOSEL */
 301     case 0x74: /* PLDCTL */
 302     case 0x80: /* BUSID */
 303     case 0x84: /* PROCID0 */
 304     case 0x88: /* PROCID1 */
 305     case 0x8c: /* OSCRESET0 */
 306     case 0x90: /* OSCRESET1 */
 307     case 0x94: /* OSCRESET2 */
 308     case 0x98: /* OSCRESET3 */
 309     case 0x9c: /* OSCRESET4 */
 310         break;
 311     case 0xa0: /* SYS_CFGDATA */
 312         if (board_id(s) != BOARD_ID_VEXPRESS) {
 313             goto bad_reg;
 314         }
 315         s->sys_cfgdata = val;
 316         return;
 317     case 0xa4: /* SYS_CFGCTRL */
 318         if (board_id(s) != BOARD_ID_VEXPRESS) {
 319             goto bad_reg;
 320         }
 321         s->sys_cfgctrl = val & ~(3 << 18);
 322         s->sys_cfgstat = 1;            /* complete */
 323         switch (s->sys_cfgctrl) {
 324         case 0xc0800000:            /* SYS_CFG_SHUTDOWN to motherboard */
 325             qemu_system_shutdown_request();
 326             break;
 327         case 0xc0900000:            /* SYS_CFG_REBOOT to motherboard */
 328             qemu_system_reset_request();
 329             break;
 330         default:
 331             s->sys_cfgstat |= 2;        /* error */
 332         }
 333         return;
 334     case 0xa8: /* SYS_CFGSTAT */
 335         if (board_id(s) != BOARD_ID_VEXPRESS) {
 336             goto bad_reg;
 337         }
 338         s->sys_cfgstat = val & 3;
 339         return;
 340     default:
 341     bad_reg:
 342         printf ("arm_sysctl_write: Bad register offset 0x%x\n", (int)offset);
 343         return;
 344     }
 345 }
 346
 347 static const MemoryRegionOps arm_sysctl_ops = {
 348     .read = arm_sysctl_read,
 349     .write = arm_sysctl_write,
 350     .endianness = DEVICE_NATIVE_ENDIAN,
 351 };
 352
 353 static void arm_sysctl_gpio_set(void *opaque, int line, int level)
 354 {
 355     arm_sysctl_state *s = (arm_sysctl_state *)opaque;
 356     switch (line) {
 357     case ARM_SYSCTL_GPIO_MMC_WPROT:
 358     {
 359         /* For PB926 and EB write-protect is bit 2 of SYS_MCI;
 360          * for all later boards it is bit 1.
 361          */
 362         int bit = 2;
 363         if ((board_id(s) == BOARD_ID_PB926) || (board_id(s) == BOARD_ID_EB)) {
 364             bit = 4;
 365         }
 366         s->sys_mci &= ~bit;
 367         if (level) {
 368             s->sys_mci |= bit;
 369         }
 370         break;
 371     }
 372     case ARM_SYSCTL_GPIO_MMC_CARDIN:
 373         s->sys_mci &= ~1;
 374         if (level) {
 375             s->sys_mci |= 1;
 376         }
 377         break;
 378     }
 379 }
 380
 381 static int arm_sysctl_init(SysBusDevice *dev)
 382 {
 383     arm_sysctl_state *s = FROM_SYSBUS(arm_sysctl_state, dev);
 384
 385     memory_region_init_io(&s->iomem, &arm_sysctl_ops, s, "arm-sysctl", 0x1000);
 386     sysbus_init_mmio(dev, &s->iomem);
 387     qdev_init_gpio_in(&s->busdev.qdev, arm_sysctl_gpio_set, 2);
 388     qdev_init_gpio_out(&s->busdev.qdev, &s->pl110_mux_ctrl, 1);
 389     return 0;
 390 }
 391
 392 static Property arm_sysctl_properties[] = {
 393     DEFINE_PROP_UINT32("sys_id", arm_sysctl_state, sys_id, 0),
 394     DEFINE_PROP_UINT32("proc_id", arm_sysctl_state, proc_id, 0),
 395     DEFINE_PROP_END_OF_LIST(),
 396 };
 397
 398 static void arm_sysctl_class_init(ObjectClass *klass, void *data)
 399 {
 400     DeviceClass *dc = DEVICE_CLASS(klass);
 401     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
 402
 403     k->init = arm_sysctl_init;
 404     dc->reset = arm_sysctl_reset;
 405     dc->vmsd = &vmstate_arm_sysctl;
 406     dc->props = arm_sysctl_properties;
 407 }
 408
 409 static TypeInfo arm_sysctl_info = {
 410     .name          = "realview_sysctl",
 411     .parent        = TYPE_SYS_BUS_DEVICE,
 412     .instance_size = sizeof(arm_sysctl_state),
 413     .class_init    = arm_sysctl_class_init,
 414 };
 415
 416 static void arm_sysctl_register_types(void)
 417 {
 418     type_register_static(&arm_sysctl_info);
 419 }
 420
 421 type_init(arm_sysctl_register_types)