virtio: add back call to virtio_bus_device_unplugged
[qemu-kvm.git] / hw / arm / integratorcp.c
bloba759689b44bc62f0d8e096fd37360f46f35d4a4f
1 /*
2 * ARM Integrator CP System emulation.
4 * Copyright (c) 2005-2007 CodeSourcery.
5 * Written by Paul Brook
7 * This code is licensed under the GPL
8 */
10 #include "hw/sysbus.h"
11 #include "hw/devices.h"
12 #include "hw/boards.h"
13 #include "hw/arm/arm.h"
14 #include "hw/misc/arm_integrator_debug.h"
15 #include "net/net.h"
16 #include "exec/address-spaces.h"
17 #include "sysemu/sysemu.h"
19 #define TYPE_INTEGRATOR_CM "integrator_core"
20 #define INTEGRATOR_CM(obj) \
21 OBJECT_CHECK(IntegratorCMState, (obj), TYPE_INTEGRATOR_CM)
23 typedef struct IntegratorCMState {
24 /*< private >*/
25 SysBusDevice parent_obj;
26 /*< public >*/
28 MemoryRegion iomem;
29 uint32_t memsz;
30 MemoryRegion flash;
31 uint32_t cm_osc;
32 uint32_t cm_ctrl;
33 uint32_t cm_lock;
34 uint32_t cm_auxosc;
35 uint32_t cm_sdram;
36 uint32_t cm_init;
37 uint32_t cm_flags;
38 uint32_t cm_nvflags;
39 uint32_t cm_refcnt_offset;
40 uint32_t int_level;
41 uint32_t irq_enabled;
42 uint32_t fiq_enabled;
43 } IntegratorCMState;
45 static uint8_t integrator_spd[128] = {
46 128, 8, 4, 11, 9, 1, 64, 0, 2, 0xa0, 0xa0, 0, 0, 8, 0, 1,
47 0xe, 4, 0x1c, 1, 2, 0x20, 0xc0, 0, 0, 0, 0, 0x30, 0x28, 0x30, 0x28, 0x40
50 static uint64_t integratorcm_read(void *opaque, hwaddr offset,
51 unsigned size)
53 IntegratorCMState *s = opaque;
54 if (offset >= 0x100 && offset < 0x200) {
55 /* CM_SPD */
56 if (offset >= 0x180)
57 return 0;
58 return integrator_spd[offset >> 2];
60 switch (offset >> 2) {
61 case 0: /* CM_ID */
62 return 0x411a3001;
63 case 1: /* CM_PROC */
64 return 0;
65 case 2: /* CM_OSC */
66 return s->cm_osc;
67 case 3: /* CM_CTRL */
68 return s->cm_ctrl;
69 case 4: /* CM_STAT */
70 return 0x00100000;
71 case 5: /* CM_LOCK */
72 if (s->cm_lock == 0xa05f) {
73 return 0x1a05f;
74 } else {
75 return s->cm_lock;
77 case 6: /* CM_LMBUSCNT */
78 /* ??? High frequency timer. */
79 hw_error("integratorcm_read: CM_LMBUSCNT");
80 case 7: /* CM_AUXOSC */
81 return s->cm_auxosc;
82 case 8: /* CM_SDRAM */
83 return s->cm_sdram;
84 case 9: /* CM_INIT */
85 return s->cm_init;
86 case 10: /* CM_REFCNT */
87 /* This register, CM_REFCNT, provides a 32-bit count value.
88 * The count increments at the fixed reference clock frequency of 24MHz
89 * and can be used as a real-time counter.
91 return (uint32_t)muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL), 24,
92 1000) - s->cm_refcnt_offset;
93 case 12: /* CM_FLAGS */
94 return s->cm_flags;
95 case 14: /* CM_NVFLAGS */
96 return s->cm_nvflags;
97 case 16: /* CM_IRQ_STAT */
98 return s->int_level & s->irq_enabled;
99 case 17: /* CM_IRQ_RSTAT */
100 return s->int_level;
101 case 18: /* CM_IRQ_ENSET */
102 return s->irq_enabled;
103 case 20: /* CM_SOFT_INTSET */
104 return s->int_level & 1;
105 case 24: /* CM_FIQ_STAT */
106 return s->int_level & s->fiq_enabled;
107 case 25: /* CM_FIQ_RSTAT */
108 return s->int_level;
109 case 26: /* CM_FIQ_ENSET */
110 return s->fiq_enabled;
111 case 32: /* CM_VOLTAGE_CTL0 */
112 case 33: /* CM_VOLTAGE_CTL1 */
113 case 34: /* CM_VOLTAGE_CTL2 */
114 case 35: /* CM_VOLTAGE_CTL3 */
115 /* ??? Voltage control unimplemented. */
116 return 0;
117 default:
118 hw_error("integratorcm_read: Unimplemented offset 0x%x\n",
119 (int)offset);
120 return 0;
124 static void integratorcm_do_remap(IntegratorCMState *s)
126 /* Sync memory region state with CM_CTRL REMAP bit:
127 * bit 0 => flash at address 0; bit 1 => RAM
129 memory_region_set_enabled(&s->flash, !(s->cm_ctrl & 4));
132 static void integratorcm_set_ctrl(IntegratorCMState *s, uint32_t value)
134 if (value & 8) {
135 qemu_system_reset_request();
137 if ((s->cm_ctrl ^ value) & 1) {
138 /* (value & 1) != 0 means the green "MISC LED" is lit.
139 * We don't have any nice place to display LEDs. printf is a bad
140 * idea because Linux uses the LED as a heartbeat and the output
141 * will swamp anything else on the terminal.
144 /* Note that the RESET bit [3] always reads as zero */
145 s->cm_ctrl = (s->cm_ctrl & ~5) | (value & 5);
146 integratorcm_do_remap(s);
149 static void integratorcm_update(IntegratorCMState *s)
151 /* ??? The CPU irq/fiq is raised when either the core module or base PIC
152 are active. */
153 if (s->int_level & (s->irq_enabled | s->fiq_enabled))
154 hw_error("Core module interrupt\n");
157 static void integratorcm_write(void *opaque, hwaddr offset,
158 uint64_t value, unsigned size)
160 IntegratorCMState *s = opaque;
161 switch (offset >> 2) {
162 case 2: /* CM_OSC */
163 if (s->cm_lock == 0xa05f)
164 s->cm_osc = value;
165 break;
166 case 3: /* CM_CTRL */
167 integratorcm_set_ctrl(s, value);
168 break;
169 case 5: /* CM_LOCK */
170 s->cm_lock = value & 0xffff;
171 break;
172 case 7: /* CM_AUXOSC */
173 if (s->cm_lock == 0xa05f)
174 s->cm_auxosc = value;
175 break;
176 case 8: /* CM_SDRAM */
177 s->cm_sdram = value;
178 break;
179 case 9: /* CM_INIT */
180 /* ??? This can change the memory bus frequency. */
181 s->cm_init = value;
182 break;
183 case 12: /* CM_FLAGSS */
184 s->cm_flags |= value;
185 break;
186 case 13: /* CM_FLAGSC */
187 s->cm_flags &= ~value;
188 break;
189 case 14: /* CM_NVFLAGSS */
190 s->cm_nvflags |= value;
191 break;
192 case 15: /* CM_NVFLAGSS */
193 s->cm_nvflags &= ~value;
194 break;
195 case 18: /* CM_IRQ_ENSET */
196 s->irq_enabled |= value;
197 integratorcm_update(s);
198 break;
199 case 19: /* CM_IRQ_ENCLR */
200 s->irq_enabled &= ~value;
201 integratorcm_update(s);
202 break;
203 case 20: /* CM_SOFT_INTSET */
204 s->int_level |= (value & 1);
205 integratorcm_update(s);
206 break;
207 case 21: /* CM_SOFT_INTCLR */
208 s->int_level &= ~(value & 1);
209 integratorcm_update(s);
210 break;
211 case 26: /* CM_FIQ_ENSET */
212 s->fiq_enabled |= value;
213 integratorcm_update(s);
214 break;
215 case 27: /* CM_FIQ_ENCLR */
216 s->fiq_enabled &= ~value;
217 integratorcm_update(s);
218 break;
219 case 32: /* CM_VOLTAGE_CTL0 */
220 case 33: /* CM_VOLTAGE_CTL1 */
221 case 34: /* CM_VOLTAGE_CTL2 */
222 case 35: /* CM_VOLTAGE_CTL3 */
223 /* ??? Voltage control unimplemented. */
224 break;
225 default:
226 hw_error("integratorcm_write: Unimplemented offset 0x%x\n",
227 (int)offset);
228 break;
232 /* Integrator/CM control registers. */
234 static const MemoryRegionOps integratorcm_ops = {
235 .read = integratorcm_read,
236 .write = integratorcm_write,
237 .endianness = DEVICE_NATIVE_ENDIAN,
240 static int integratorcm_init(SysBusDevice *dev)
242 IntegratorCMState *s = INTEGRATOR_CM(dev);
244 s->cm_osc = 0x01000048;
245 /* ??? What should the high bits of this value be? */
246 s->cm_auxosc = 0x0007feff;
247 s->cm_sdram = 0x00011122;
248 if (s->memsz >= 256) {
249 integrator_spd[31] = 64;
250 s->cm_sdram |= 0x10;
251 } else if (s->memsz >= 128) {
252 integrator_spd[31] = 32;
253 s->cm_sdram |= 0x0c;
254 } else if (s->memsz >= 64) {
255 integrator_spd[31] = 16;
256 s->cm_sdram |= 0x08;
257 } else if (s->memsz >= 32) {
258 integrator_spd[31] = 4;
259 s->cm_sdram |= 0x04;
260 } else {
261 integrator_spd[31] = 2;
263 memcpy(integrator_spd + 73, "QEMU-MEMORY", 11);
264 s->cm_init = 0x00000112;
265 s->cm_refcnt_offset = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL), 24,
266 1000);
267 memory_region_init_ram(&s->flash, OBJECT(s), "integrator.flash", 0x100000);
268 vmstate_register_ram_global(&s->flash);
270 memory_region_init_io(&s->iomem, OBJECT(s), &integratorcm_ops, s,
271 "integratorcm", 0x00800000);
272 sysbus_init_mmio(dev, &s->iomem);
274 integratorcm_do_remap(s);
275 /* ??? Save/restore. */
276 return 0;
279 /* Integrator/CP hardware emulation. */
280 /* Primary interrupt controller. */
282 #define TYPE_INTEGRATOR_PIC "integrator_pic"
283 #define INTEGRATOR_PIC(obj) \
284 OBJECT_CHECK(icp_pic_state, (obj), TYPE_INTEGRATOR_PIC)
286 typedef struct icp_pic_state {
287 /*< private >*/
288 SysBusDevice parent_obj;
289 /*< public >*/
291 MemoryRegion iomem;
292 uint32_t level;
293 uint32_t irq_enabled;
294 uint32_t fiq_enabled;
295 qemu_irq parent_irq;
296 qemu_irq parent_fiq;
297 } icp_pic_state;
299 static void icp_pic_update(icp_pic_state *s)
301 uint32_t flags;
303 flags = (s->level & s->irq_enabled);
304 qemu_set_irq(s->parent_irq, flags != 0);
305 flags = (s->level & s->fiq_enabled);
306 qemu_set_irq(s->parent_fiq, flags != 0);
309 static void icp_pic_set_irq(void *opaque, int irq, int level)
311 icp_pic_state *s = (icp_pic_state *)opaque;
312 if (level)
313 s->level |= 1 << irq;
314 else
315 s->level &= ~(1 << irq);
316 icp_pic_update(s);
319 static uint64_t icp_pic_read(void *opaque, hwaddr offset,
320 unsigned size)
322 icp_pic_state *s = (icp_pic_state *)opaque;
324 switch (offset >> 2) {
325 case 0: /* IRQ_STATUS */
326 return s->level & s->irq_enabled;
327 case 1: /* IRQ_RAWSTAT */
328 return s->level;
329 case 2: /* IRQ_ENABLESET */
330 return s->irq_enabled;
331 case 4: /* INT_SOFTSET */
332 return s->level & 1;
333 case 8: /* FRQ_STATUS */
334 return s->level & s->fiq_enabled;
335 case 9: /* FRQ_RAWSTAT */
336 return s->level;
337 case 10: /* FRQ_ENABLESET */
338 return s->fiq_enabled;
339 case 3: /* IRQ_ENABLECLR */
340 case 5: /* INT_SOFTCLR */
341 case 11: /* FRQ_ENABLECLR */
342 default:
343 printf ("icp_pic_read: Bad register offset 0x%x\n", (int)offset);
344 return 0;
348 static void icp_pic_write(void *opaque, hwaddr offset,
349 uint64_t value, unsigned size)
351 icp_pic_state *s = (icp_pic_state *)opaque;
353 switch (offset >> 2) {
354 case 2: /* IRQ_ENABLESET */
355 s->irq_enabled |= value;
356 break;
357 case 3: /* IRQ_ENABLECLR */
358 s->irq_enabled &= ~value;
359 break;
360 case 4: /* INT_SOFTSET */
361 if (value & 1)
362 icp_pic_set_irq(s, 0, 1);
363 break;
364 case 5: /* INT_SOFTCLR */
365 if (value & 1)
366 icp_pic_set_irq(s, 0, 0);
367 break;
368 case 10: /* FRQ_ENABLESET */
369 s->fiq_enabled |= value;
370 break;
371 case 11: /* FRQ_ENABLECLR */
372 s->fiq_enabled &= ~value;
373 break;
374 case 0: /* IRQ_STATUS */
375 case 1: /* IRQ_RAWSTAT */
376 case 8: /* FRQ_STATUS */
377 case 9: /* FRQ_RAWSTAT */
378 default:
379 printf ("icp_pic_write: Bad register offset 0x%x\n", (int)offset);
380 return;
382 icp_pic_update(s);
385 static const MemoryRegionOps icp_pic_ops = {
386 .read = icp_pic_read,
387 .write = icp_pic_write,
388 .endianness = DEVICE_NATIVE_ENDIAN,
391 static int icp_pic_init(SysBusDevice *sbd)
393 DeviceState *dev = DEVICE(sbd);
394 icp_pic_state *s = INTEGRATOR_PIC(dev);
396 qdev_init_gpio_in(dev, icp_pic_set_irq, 32);
397 sysbus_init_irq(sbd, &s->parent_irq);
398 sysbus_init_irq(sbd, &s->parent_fiq);
399 memory_region_init_io(&s->iomem, OBJECT(s), &icp_pic_ops, s,
400 "icp-pic", 0x00800000);
401 sysbus_init_mmio(sbd, &s->iomem);
402 return 0;
405 /* CP control registers. */
407 static uint64_t icp_control_read(void *opaque, hwaddr offset,
408 unsigned size)
410 switch (offset >> 2) {
411 case 0: /* CP_IDFIELD */
412 return 0x41034003;
413 case 1: /* CP_FLASHPROG */
414 return 0;
415 case 2: /* CP_INTREG */
416 return 0;
417 case 3: /* CP_DECODE */
418 return 0x11;
419 default:
420 hw_error("icp_control_read: Bad offset %x\n", (int)offset);
421 return 0;
425 static void icp_control_write(void *opaque, hwaddr offset,
426 uint64_t value, unsigned size)
428 switch (offset >> 2) {
429 case 1: /* CP_FLASHPROG */
430 case 2: /* CP_INTREG */
431 case 3: /* CP_DECODE */
432 /* Nothing interesting implemented yet. */
433 break;
434 default:
435 hw_error("icp_control_write: Bad offset %x\n", (int)offset);
439 static const MemoryRegionOps icp_control_ops = {
440 .read = icp_control_read,
441 .write = icp_control_write,
442 .endianness = DEVICE_NATIVE_ENDIAN,
445 static void icp_control_init(hwaddr base)
447 MemoryRegion *io;
449 io = (MemoryRegion *)g_malloc0(sizeof(MemoryRegion));
450 memory_region_init_io(io, NULL, &icp_control_ops, NULL,
451 "control", 0x00800000);
452 memory_region_add_subregion(get_system_memory(), base, io);
453 /* ??? Save/restore. */
457 /* Board init. */
459 static struct arm_boot_info integrator_binfo = {
460 .loader_start = 0x0,
461 .board_id = 0x113,
464 static void integratorcp_init(QEMUMachineInitArgs *args)
466 ram_addr_t ram_size = args->ram_size;
467 const char *cpu_model = args->cpu_model;
468 const char *kernel_filename = args->kernel_filename;
469 const char *kernel_cmdline = args->kernel_cmdline;
470 const char *initrd_filename = args->initrd_filename;
471 ARMCPU *cpu;
472 MemoryRegion *address_space_mem = get_system_memory();
473 MemoryRegion *ram = g_new(MemoryRegion, 1);
474 MemoryRegion *ram_alias = g_new(MemoryRegion, 1);
475 qemu_irq pic[32];
476 DeviceState *dev;
477 int i;
479 if (!cpu_model) {
480 cpu_model = "arm926";
482 cpu = cpu_arm_init(cpu_model);
483 if (!cpu) {
484 fprintf(stderr, "Unable to find CPU definition\n");
485 exit(1);
488 memory_region_init_ram(ram, NULL, "integrator.ram", ram_size);
489 vmstate_register_ram_global(ram);
490 /* ??? On a real system the first 1Mb is mapped as SSRAM or boot flash. */
491 /* ??? RAM should repeat to fill physical memory space. */
492 /* SDRAM at address zero*/
493 memory_region_add_subregion(address_space_mem, 0, ram);
494 /* And again at address 0x80000000 */
495 memory_region_init_alias(ram_alias, NULL, "ram.alias", ram, 0, ram_size);
496 memory_region_add_subregion(address_space_mem, 0x80000000, ram_alias);
498 dev = qdev_create(NULL, TYPE_INTEGRATOR_CM);
499 qdev_prop_set_uint32(dev, "memsz", ram_size >> 20);
500 qdev_init_nofail(dev);
501 sysbus_mmio_map((SysBusDevice *)dev, 0, 0x10000000);
503 dev = sysbus_create_varargs(TYPE_INTEGRATOR_PIC, 0x14000000,
504 qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ),
505 qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ),
506 NULL);
507 for (i = 0; i < 32; i++) {
508 pic[i] = qdev_get_gpio_in(dev, i);
510 sysbus_create_simple(TYPE_INTEGRATOR_PIC, 0xca000000, pic[26]);
511 sysbus_create_varargs("integrator_pit", 0x13000000,
512 pic[5], pic[6], pic[7], NULL);
513 sysbus_create_simple("pl031", 0x15000000, pic[8]);
514 sysbus_create_simple("pl011", 0x16000000, pic[1]);
515 sysbus_create_simple("pl011", 0x17000000, pic[2]);
516 icp_control_init(0xcb000000);
517 sysbus_create_simple("pl050_keyboard", 0x18000000, pic[3]);
518 sysbus_create_simple("pl050_mouse", 0x19000000, pic[4]);
519 sysbus_create_simple(TYPE_INTEGRATOR_DEBUG, 0x1a000000, 0);
520 sysbus_create_varargs("pl181", 0x1c000000, pic[23], pic[24], NULL);
521 if (nd_table[0].used)
522 smc91c111_init(&nd_table[0], 0xc8000000, pic[27]);
524 sysbus_create_simple("pl110", 0xc0000000, pic[22]);
526 integrator_binfo.ram_size = ram_size;
527 integrator_binfo.kernel_filename = kernel_filename;
528 integrator_binfo.kernel_cmdline = kernel_cmdline;
529 integrator_binfo.initrd_filename = initrd_filename;
530 arm_load_kernel(cpu, &integrator_binfo);
533 static QEMUMachine integratorcp_machine = {
534 .name = "integratorcp",
535 .desc = "ARM Integrator/CP (ARM926EJ-S)",
536 .init = integratorcp_init,
537 .is_default = 1,
540 static void integratorcp_machine_init(void)
542 qemu_register_machine(&integratorcp_machine);
545 machine_init(integratorcp_machine_init);
547 static Property core_properties[] = {
548 DEFINE_PROP_UINT32("memsz", IntegratorCMState, memsz, 0),
549 DEFINE_PROP_END_OF_LIST(),
552 static void core_class_init(ObjectClass *klass, void *data)
554 DeviceClass *dc = DEVICE_CLASS(klass);
555 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
557 k->init = integratorcm_init;
558 dc->props = core_properties;
561 static const TypeInfo core_info = {
562 .name = TYPE_INTEGRATOR_CM,
563 .parent = TYPE_SYS_BUS_DEVICE,
564 .instance_size = sizeof(IntegratorCMState),
565 .class_init = core_class_init,
568 static void icp_pic_class_init(ObjectClass *klass, void *data)
570 SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
572 sdc->init = icp_pic_init;
575 static const TypeInfo icp_pic_info = {
576 .name = TYPE_INTEGRATOR_PIC,
577 .parent = TYPE_SYS_BUS_DEVICE,
578 .instance_size = sizeof(icp_pic_state),
579 .class_init = icp_pic_class_init,
582 static void integratorcp_register_types(void)
584 type_register_static(&icp_pic_info);
585 type_register_static(&core_info);
588 type_init(integratorcp_register_types)