hw/imx_timer.c

   1 /*
   2  * IMX31 Timer
   3  *
   4  * Copyright (c) 2008 OK Labs
   5  * Copyright (c) 2011 NICTA Pty Ltd
   6  * Originally Written by Hans Jiang
   7  * Updated by Peter Chubb
   8  *
   9  * This code is licenced under GPL version 2 or later.  See
  10  * the COPYING file in the top-level directory.
  11  *
  12  */
  13
  14 #include "hw.h"
  15 #include "qemu-timer.h"
  16 #include "ptimer.h"
  17 #include "sysbus.h"
  18 #include "imx.h"
  19
  20 //#define DEBUG_TIMER 1
  21 #ifdef DEBUG_TIMER
  22 #  define DPRINTF(fmt, args...) \
  23       do { printf("imx_timer: " fmt , ##args); } while (0)
  24 #else
  25 #  define DPRINTF(fmt, args...) do {} while (0)
  26 #endif
  27
  28 /*
  29  * Define to 1 for messages about attempts to
  30  * access unimplemented registers or similar.
  31  */
  32 #define DEBUG_IMPLEMENTATION 1
  33 #if DEBUG_IMPLEMENTATION
  34 #  define IPRINTF(fmt, args...)                                         \
  35     do  { fprintf(stderr, "imx_timer: " fmt, ##args); } while (0)
  36 #else
  37 #  define IPRINTF(fmt, args...) do {} while (0)
  38 #endif
  39
  40 /*
  41  * GPT : General purpose timer
  42  *
  43  * This timer counts up continuously while it is enabled, resetting itself
  44  * to 0 when it reaches TIMER_MAX (in freerun mode) or when it
  45  * reaches the value of ocr1 (in periodic mode).  WE simulate this using a
  46  * QEMU ptimer counting down from ocr1 and reloading from ocr1 in
  47  * periodic mode, or counting from ocr1 to zero, then TIMER_MAX - ocr1.
  48  * waiting_rov is set when counting from TIMER_MAX.
  49  *
  50  * In the real hardware, there are three comparison registers that can
  51  * trigger interrupts, and compare channel 1 can be used to
  52  * force-reset the timer. However, this is a `bare-bones'
  53  * implementation: only what Linux 3.x uses has been implemented
  54  * (free-running timer from 0 to OCR1 or TIMER_MAX) .
  55  */
  56
  57
  58 #define TIMER_MAX  0XFFFFFFFFUL
  59
  60 /* Control register.  Not all of these bits have any effect (yet) */
  61 #define GPT_CR_EN     (1 << 0)  /* GPT Enable */
  62 #define GPT_CR_ENMOD  (1 << 1)  /* GPT Enable Mode */
  63 #define GPT_CR_DBGEN  (1 << 2)  /* GPT Debug mode enable */
  64 #define GPT_CR_WAITEN (1 << 3)  /* GPT Wait Mode Enable  */
  65 #define GPT_CR_DOZEN  (1 << 4)  /* GPT Doze mode enable */
  66 #define GPT_CR_STOPEN (1 << 5)  /* GPT Stop Mode Enable */
  67 #define GPT_CR_CLKSRC_SHIFT (6)
  68 #define GPT_CR_CLKSRC_MASK  (0x7)
  69
  70 #define GPT_CR_FRR    (1 << 9)  /* Freerun or Restart */
  71 #define GPT_CR_SWR    (1 << 15) /* Software Reset */
  72 #define GPT_CR_IM1    (3 << 16) /* Input capture channel 1 mode (2 bits) */
  73 #define GPT_CR_IM2    (3 << 18) /* Input capture channel 2 mode (2 bits) */
  74 #define GPT_CR_OM1    (7 << 20) /* Output Compare Channel 1 Mode (3 bits) */
  75 #define GPT_CR_OM2    (7 << 23) /* Output Compare Channel 2 Mode (3 bits) */
  76 #define GPT_CR_OM3    (7 << 26) /* Output Compare Channel 3 Mode (3 bits) */
  77 #define GPT_CR_FO1    (1 << 29) /* Force Output Compare Channel 1 */
  78 #define GPT_CR_FO2    (1 << 30) /* Force Output Compare Channel 2 */
  79 #define GPT_CR_FO3    (1 << 31) /* Force Output Compare Channel 3 */
  80
  81 #define GPT_SR_OF1  (1 << 0)
  82 #define GPT_SR_ROV  (1 << 5)
  83
  84 #define GPT_IR_OF1IE  (1 << 0)
  85 #define GPT_IR_ROVIE  (1 << 5)
  86
  87 typedef struct {
  88     SysBusDevice busdev;
  89     ptimer_state *timer;
  90     MemoryRegion iomem;
  91     DeviceState *ccm;
  92
  93     uint32_t cr;
  94     uint32_t pr;
  95     uint32_t sr;
  96     uint32_t ir;
  97     uint32_t ocr1;
  98     uint32_t cnt;
  99
 100     uint32_t waiting_rov;
 101     qemu_irq irq;
 102 } IMXTimerGState;
 103
 104 static const VMStateDescription vmstate_imx_timerg = {
 105     .name = "imx-timerg",
 106     .version_id = 1,
 107     .minimum_version_id = 1,
 108     .minimum_version_id_old = 1,
 109     .fields      = (VMStateField[]) {
 110         VMSTATE_UINT32(cr, IMXTimerGState),
 111         VMSTATE_UINT32(pr, IMXTimerGState),
 112         VMSTATE_UINT32(sr, IMXTimerGState),
 113         VMSTATE_UINT32(ir, IMXTimerGState),
 114         VMSTATE_UINT32(ocr1, IMXTimerGState),
 115         VMSTATE_UINT32(cnt, IMXTimerGState),
 116         VMSTATE_UINT32(waiting_rov, IMXTimerGState),
 117         VMSTATE_PTIMER(timer, IMXTimerGState),
 118         VMSTATE_END_OF_LIST()
 119     }
 120 };
 121
 122 static const IMXClk imx_timerg_clocks[] = {
 123     NOCLK,    /* 000 No clock source */
 124     IPG,      /* 001 ipg_clk, 532MHz*/
 125     IPG,      /* 010 ipg_clk_highfreq */
 126     NOCLK,    /* 011 not defined */
 127     CLK_32k,  /* 100 ipg_clk_32k */
 128     NOCLK,    /* 101 not defined */
 129     NOCLK,    /* 110 not defined */
 130     NOCLK,    /* 111 not defined */
 131 };
 132
 133
 134 static void imx_timerg_set_freq(IMXTimerGState *s)
 135 {
 136     int clksrc;
 137     uint32_t freq;
 138
 139     clksrc = (s->cr >> GPT_CR_CLKSRC_SHIFT) & GPT_CR_CLKSRC_MASK;
 140     freq = imx_clock_frequency(s->ccm, imx_timerg_clocks[clksrc]) / (1 + s->pr);
 141
 142     DPRINTF("Setting gtimer clksrc %d to frequency %d\n", clksrc, freq);
 143     if (freq) {
 144         ptimer_set_freq(s->timer, freq);
 145     }
 146 }
 147
 148 static void imx_timerg_update(IMXTimerGState *s)
 149 {
 150     uint32_t flags = s->sr & s->ir & (GPT_SR_OF1 | GPT_SR_ROV);
 151
 152     DPRINTF("g-timer SR: %s %s IR=%s %s, %s\n",
 153             s->sr & GPT_SR_OF1 ? "OF1" : "",
 154             s->sr & GPT_SR_ROV ? "ROV" : "",
 155             s->ir & GPT_SR_OF1 ? "OF1" : "",
 156             s->ir & GPT_SR_ROV ? "ROV" : "",
 157             s->cr & GPT_CR_EN ? "CR_EN" : "Not Enabled");
 158
 159
 160     qemu_set_irq(s->irq, (s->cr & GPT_CR_EN) && flags);
 161 }
 162
 163 static uint32_t imx_timerg_update_counts(IMXTimerGState *s)
 164 {
 165     uint64_t target = s->waiting_rov ? TIMER_MAX : s->ocr1;
 166     uint64_t cnt = ptimer_get_count(s->timer);
 167     s->cnt = target - cnt;
 168     return s->cnt;
 169 }
 170
 171 static void imx_timerg_reload(IMXTimerGState *s, uint32_t timeout)
 172 {
 173     uint64_t diff_cnt;
 174
 175     if (!(s->cr & GPT_CR_FRR)) {
 176         IPRINTF("IMX_timerg_reload --- called in reset-mode\n");
 177         return;
 178     }
 179
 180     /*
 181      * For small timeouts, qemu sometimes runs too slow.
 182      * Better deliver a late interrupt than none.
 183      *
 184      * In Reset mode (FRR bit clear)
 185      * the ptimer reloads itself from OCR1;
 186      * in free-running mode we need to fake
 187      * running from 0 to ocr1 to TIMER_MAX
 188      */
 189     if (timeout > s->cnt) {
 190         diff_cnt = timeout - s->cnt;
 191     } else {
 192         diff_cnt = 0;
 193     }
 194     ptimer_set_count(s->timer, diff_cnt);
 195 }
 196
 197 static uint64_t imx_timerg_read(void *opaque, target_phys_addr_t offset,
 198                                 unsigned size)
 199 {
 200     IMXTimerGState *s = (IMXTimerGState *)opaque;
 201
 202     DPRINTF("g-read(offset=%x)", offset >> 2);
 203     switch (offset >> 2) {
 204     case 0: /* Control Register */
 205         DPRINTF(" cr = %x\n", s->cr);
 206         return s->cr;
 207
 208     case 1: /* prescaler */
 209         DPRINTF(" pr = %x\n", s->pr);
 210         return s->pr;
 211
 212     case 2: /* Status Register */
 213         DPRINTF(" sr = %x\n", s->sr);
 214         return s->sr;
 215
 216     case 3: /* Interrupt Register */
 217         DPRINTF(" ir = %x\n", s->ir);
 218         return s->ir;
 219
 220     case 4: /* Output Compare Register 1 */
 221         DPRINTF(" ocr1 = %x\n", s->ocr1);
 222         return s->ocr1;
 223
 224
 225     case 9: /* cnt */
 226         imx_timerg_update_counts(s);
 227         DPRINTF(" cnt = %x\n", s->cnt);
 228         return s->cnt;
 229     }
 230
 231     IPRINTF("imx_timerg_read: Bad offset %x\n",
 232             (int)offset >> 2);
 233     return 0;
 234 }
 235
 236 static void imx_timerg_reset(DeviceState *dev)
 237 {
 238     IMXTimerGState *s = container_of(dev, IMXTimerGState, busdev.qdev);
 239
 240     /*
 241      * Soft reset doesn't touch some bits; hard reset clears them
 242      */
 243     s->cr &= ~(GPT_CR_EN|GPT_CR_DOZEN|GPT_CR_WAITEN|GPT_CR_DBGEN);
 244     s->sr = 0;
 245     s->pr = 0;
 246     s->ir = 0;
 247     s->cnt = 0;
 248     s->ocr1 = TIMER_MAX;
 249     ptimer_stop(s->timer);
 250     ptimer_set_limit(s->timer, TIMER_MAX, 1);
 251     imx_timerg_set_freq(s);
 252 }
 253
 254 static void imx_timerg_write(void *opaque, target_phys_addr_t offset,
 255                              uint64_t value, unsigned size)
 256 {
 257     IMXTimerGState *s = (IMXTimerGState *)opaque;
 258     DPRINTF("g-write(offset=%x, value = 0x%x)\n", (unsigned int)offset >> 2,
 259             (unsigned int)value);
 260
 261     switch (offset >> 2) {
 262     case 0: {
 263         uint32_t oldcr = s->cr;
 264         /* CR */
 265         if (value & GPT_CR_SWR) { /* force reset */
 266             value &= ~GPT_CR_SWR;
 267             imx_timerg_reset(&s->busdev.qdev);
 268             imx_timerg_update(s);
 269         }
 270
 271         s->cr = value & ~0x7c00;
 272         imx_timerg_set_freq(s);
 273         if ((oldcr ^ value) & GPT_CR_EN) {
 274             if (value & GPT_CR_EN) {
 275                 if (value & GPT_CR_ENMOD) {
 276                     ptimer_set_count(s->timer, s->ocr1);
 277                     s->cnt = 0;
 278                 }
 279                 ptimer_run(s->timer,
 280                            (value & GPT_CR_FRR) && (s->ocr1 != TIMER_MAX));
 281             } else {
 282                 ptimer_stop(s->timer);
 283             };
 284         }
 285         return;
 286     }
 287
 288     case 1: /* Prescaler */
 289         s->pr = value & 0xfff;
 290         imx_timerg_set_freq(s);
 291         return;
 292
 293     case 2: /* SR */
 294         /*
 295          * No point in implementing the status register bits to do with
 296          * external interrupt sources.
 297          */
 298         value &= GPT_SR_OF1 | GPT_SR_ROV;
 299         s->sr &= ~value;
 300         imx_timerg_update(s);
 301         return;
 302
 303     case 3: /* IR -- interrupt register */
 304         s->ir = value & 0x3f;
 305         imx_timerg_update(s);
 306         return;
 307
 308     case 4: /* OCR1 -- output compare register */
 309         /* In non-freerun mode, reset count when this register is written */
 310         if (!(s->cr & GPT_CR_FRR)) {
 311             s->waiting_rov = 0;
 312             ptimer_set_limit(s->timer, value, 1);
 313         } else {
 314             imx_timerg_update_counts(s);
 315             if (value > s->cnt) {
 316                 s->waiting_rov = 0;
 317                 imx_timerg_reload(s, value);
 318             } else {
 319                 s->waiting_rov = 1;
 320                 imx_timerg_reload(s, TIMER_MAX - s->cnt);
 321             }
 322         }
 323         s->ocr1 = value;
 324         return;
 325
 326     default:
 327         IPRINTF("imx_timerg_write: Bad offset %x\n",
 328                 (int)offset >> 2);
 329     }
 330 }
 331
 332 static void imx_timerg_timeout(void *opaque)
 333 {
 334     IMXTimerGState *s = (IMXTimerGState *)opaque;
 335
 336     DPRINTF("imx_timerg_timeout, waiting rov=%d\n", s->waiting_rov);
 337     if (s->cr & GPT_CR_FRR) {
 338         /*
 339          * Free running timer from 0 -> TIMERMAX
 340          * Generates interrupt at TIMER_MAX and at cnt==ocr1
 341          * If ocr1 == TIMER_MAX, then no need to reload timer.
 342          */
 343         if (s->ocr1 == TIMER_MAX) {
 344             DPRINTF("s->ocr1 == TIMER_MAX, FRR\n");
 345             s->sr |= GPT_SR_OF1 | GPT_SR_ROV;
 346             imx_timerg_update(s);
 347             return;
 348         }
 349
 350         if (s->waiting_rov) {
 351             /*
 352              * We were waiting for cnt==TIMER_MAX
 353              */
 354             s->sr |= GPT_SR_ROV;
 355             s->waiting_rov = 0;
 356             s->cnt = 0;
 357             imx_timerg_reload(s, s->ocr1);
 358         } else {
 359             /* Must have got a cnt==ocr1 timeout. */
 360             s->sr |= GPT_SR_OF1;
 361             s->cnt = s->ocr1;
 362             s->waiting_rov = 1;
 363             imx_timerg_reload(s, TIMER_MAX);
 364         }
 365         imx_timerg_update(s);
 366         return;
 367     }
 368
 369     s->sr |= GPT_SR_OF1;
 370     imx_timerg_update(s);
 371 }
 372
 373 static const MemoryRegionOps imx_timerg_ops = {
 374     .read = imx_timerg_read,
 375     .write = imx_timerg_write,
 376     .endianness = DEVICE_NATIVE_ENDIAN,
 377 };
 378
 379
 380 static int imx_timerg_init(SysBusDevice *dev)
 381 {
 382     IMXTimerGState *s = FROM_SYSBUS(IMXTimerGState, dev);
 383     QEMUBH *bh;
 384
 385     sysbus_init_irq(dev, &s->irq);
 386     memory_region_init_io(&s->iomem, &imx_timerg_ops,
 387                           s, "imxg-timer",
 388                           0x00001000);
 389     sysbus_init_mmio(dev, &s->iomem);
 390
 391     bh = qemu_bh_new(imx_timerg_timeout, s);
 392     s->timer = ptimer_init(bh);
 393
 394     /* Hard reset resets extra bits in CR */
 395     s->cr = 0;
 396     return 0;
 397 }
 398
 399
 400
 401 /*
 402  * EPIT: Enhanced periodic interrupt timer
 403  */
 404
 405 #define CR_EN       (1 << 0)
 406 #define CR_ENMOD    (1 << 1)
 407 #define CR_OCIEN    (1 << 2)
 408 #define CR_RLD      (1 << 3)
 409 #define CR_PRESCALE_SHIFT (4)
 410 #define CR_PRESCALE_MASK  (0xfff)
 411 #define CR_SWR      (1 << 16)
 412 #define CR_IOVW     (1 << 17)
 413 #define CR_DBGEN    (1 << 18)
 414 #define CR_EPIT     (1 << 19)
 415 #define CR_DOZEN    (1 << 20)
 416 #define CR_STOPEN   (1 << 21)
 417 #define CR_CLKSRC_SHIFT (24)
 418 #define CR_CLKSRC_MASK  (0x3 << CR_CLKSRC_SHIFT)
 419
 420
 421 /*
 422  * Exact clock frequencies vary from board to board.
 423  * These are typical.
 424  */
 425 static const IMXClk imx_timerp_clocks[] =  {
 426     0,        /* disabled */
 427     IPG, /* ipg_clk, ~532MHz */
 428     IPG, /* ipg_clk_highfreq */
 429     CLK_32k,    /* ipg_clk_32k -- ~32kHz */
 430 };
 431
 432 typedef struct {
 433     SysBusDevice busdev;
 434     ptimer_state *timer;
 435     MemoryRegion iomem;
 436     DeviceState *ccm;
 437
 438     uint32_t cr;
 439     uint32_t lr;
 440     uint32_t cmp;
 441
 442     uint32_t freq;
 443     int int_level;
 444     qemu_irq irq;
 445 } IMXTimerPState;
 446
 447 /*
 448  * Update interrupt status
 449  */
 450 static void imx_timerp_update(IMXTimerPState *s)
 451 {
 452     if (s->int_level && (s->cr & CR_OCIEN)) {
 453         qemu_irq_raise(s->irq);
 454     } else {
 455         qemu_irq_lower(s->irq);
 456     }
 457 }
 458
 459 static void imx_timerp_reset(DeviceState *dev)
 460 {
 461     IMXTimerPState *s = container_of(dev, IMXTimerPState, busdev.qdev);
 462
 463     s->cr = 0;
 464     s->lr = TIMER_MAX;
 465     s->int_level = 0;
 466     s->cmp = 0;
 467     ptimer_stop(s->timer);
 468     ptimer_set_count(s->timer, TIMER_MAX);
 469 }
 470
 471 static uint64_t imx_timerp_read(void *opaque, target_phys_addr_t offset,
 472                                 unsigned size)
 473 {
 474     IMXTimerPState *s = (IMXTimerPState *)opaque;
 475
 476     DPRINTF("p-read(offset=%x)", offset >> 2);
 477     switch (offset >> 2) {
 478     case 0: /* Control Register */
 479         DPRINTF("cr %x\n", s->cr);
 480         return s->cr;
 481
 482     case 1: /* Status Register */
 483         DPRINTF("int_level %x\n", s->int_level);
 484         return s->int_level;
 485
 486     case 2: /* LR - ticks*/
 487         DPRINTF("lr %x\n", s->lr);
 488         return s->lr;
 489
 490     case 3: /* CMP */
 491         DPRINTF("cmp %x\n", s->cmp);
 492         return s->cmp;
 493
 494     case 4: /* CNT */
 495         return ptimer_get_count(s->timer);
 496     }
 497     IPRINTF("imx_timerp_read: Bad offset %x\n",
 498             (int)offset >> 2);
 499     return 0;
 500 }
 501
 502 static void set_timerp_freq(IMXTimerPState *s)
 503 {
 504     int clksrc;
 505     unsigned prescaler;
 506     uint32_t freq;
 507
 508     clksrc = (s->cr & CR_CLKSRC_MASK) >> CR_CLKSRC_SHIFT;
 509     prescaler = 1 + ((s->cr >> CR_PRESCALE_SHIFT) & CR_PRESCALE_MASK);
 510     freq = imx_clock_frequency(s->ccm, imx_timerp_clocks[clksrc]) / prescaler;
 511
 512     s->freq = freq;
 513     DPRINTF("Setting ptimer frequency to %u\n", freq);
 514
 515     if (freq) {
 516         ptimer_set_freq(s->timer, freq);
 517     }
 518 }
 519
 520 static void imx_timerp_write(void *opaque, target_phys_addr_t offset,
 521                              uint64_t value, unsigned size)
 522 {
 523     IMXTimerPState *s = (IMXTimerPState *)opaque;
 524     DPRINTF("p-write(offset=%x, value = %x)\n", (unsigned int)offset >> 2,
 525             (unsigned int)value);
 526
 527     switch (offset >> 2) {
 528     case 0: /* CR */
 529         if (value & CR_SWR) {
 530             imx_timerp_reset(&s->busdev.qdev);
 531             value &= ~CR_SWR;
 532         }
 533         s->cr = value & 0x03ffffff;
 534         set_timerp_freq(s);
 535
 536         if (s->freq && (s->cr & CR_EN)) {
 537             if (!(s->cr & CR_ENMOD)) {
 538                 ptimer_set_count(s->timer, s->lr);
 539             }
 540             ptimer_run(s->timer, 0);
 541         } else {
 542             ptimer_stop(s->timer);
 543         }
 544         break;
 545
 546     case 1: /* SR - ACK*/
 547         s->int_level = 0;
 548         imx_timerp_update(s);
 549         break;
 550
 551     case 2: /* LR - set ticks */
 552         s->lr = value;
 553         ptimer_set_limit(s->timer, value, !!(s->cr & CR_IOVW));
 554         break;
 555
 556     case 3: /* CMP */
 557         s->cmp = value;
 558         if (value) {
 559             IPRINTF(
 560                 "Values for EPIT comparison other than zero not supported\n"
 561             );
 562         }
 563         break;
 564
 565     default:
 566         IPRINTF("imx_timerp_write: Bad offset %x\n",
 567                    (int)offset >> 2);
 568     }
 569 }
 570
 571 static void imx_timerp_tick(void *opaque)
 572 {
 573     IMXTimerPState *s = (IMXTimerPState *)opaque;
 574
 575    DPRINTF("imxp tick\n");
 576     if (!(s->cr & CR_RLD)) {
 577         ptimer_set_count(s->timer, TIMER_MAX);
 578     }
 579     s->int_level = 1;
 580     imx_timerp_update(s);
 581 }
 582
 583 void imx_timerp_create(const target_phys_addr_t addr,
 584                               qemu_irq irq,
 585                               DeviceState *ccm)
 586 {
 587     IMXTimerPState *pp;
 588     DeviceState *dev;
 589
 590     dev = sysbus_create_simple("imx_timerp", addr, irq);
 591     pp = container_of(dev, IMXTimerPState, busdev.qdev);
 592     pp->ccm = ccm;
 593 }
 594
 595 static const MemoryRegionOps imx_timerp_ops = {
 596   .read = imx_timerp_read,
 597   .write = imx_timerp_write,
 598   .endianness = DEVICE_NATIVE_ENDIAN,
 599 };
 600
 601 static const VMStateDescription vmstate_imx_timerp = {
 602     .name = "imx-timerp",
 603     .version_id = 1,
 604     .minimum_version_id = 1,
 605     .minimum_version_id_old = 1,
 606     .fields      = (VMStateField[]) {
 607         VMSTATE_UINT32(cr, IMXTimerPState),
 608         VMSTATE_UINT32(lr, IMXTimerPState),
 609         VMSTATE_UINT32(cmp, IMXTimerPState),
 610         VMSTATE_UINT32(freq, IMXTimerPState),
 611         VMSTATE_INT32(int_level, IMXTimerPState),
 612         VMSTATE_PTIMER(timer, IMXTimerPState),
 613         VMSTATE_END_OF_LIST()
 614     }
 615 };
 616
 617 static int imx_timerp_init(SysBusDevice *dev)
 618 {
 619     IMXTimerPState *s = FROM_SYSBUS(IMXTimerPState, dev);
 620     QEMUBH *bh;
 621
 622     DPRINTF("imx_timerp_init\n");
 623
 624     sysbus_init_irq(dev, &s->irq);
 625     memory_region_init_io(&s->iomem, &imx_timerp_ops,
 626                           s, "imxp-timer",
 627                           0x00001000);
 628     sysbus_init_mmio(dev, &s->iomem);
 629
 630     bh = qemu_bh_new(imx_timerp_tick, s);
 631     s->timer = ptimer_init(bh);
 632
 633     return 0;
 634 }
 635
 636
 637 void imx_timerg_create(const target_phys_addr_t addr,
 638                               qemu_irq irq,
 639                               DeviceState *ccm)
 640 {
 641     IMXTimerGState *pp;
 642     DeviceState *dev;
 643
 644     dev = sysbus_create_simple("imx_timerg", addr, irq);
 645     pp = container_of(dev, IMXTimerGState, busdev.qdev);
 646     pp->ccm = ccm;
 647 }
 648
 649 static void imx_timerg_class_init(ObjectClass *klass, void *data)
 650 {
 651     DeviceClass *dc  = DEVICE_CLASS(klass);
 652     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
 653     k->init = imx_timerg_init;
 654     dc->vmsd = &vmstate_imx_timerg;
 655     dc->reset = imx_timerg_reset;
 656     dc->desc = "i.MX general timer";
 657 }
 658
 659 static void imx_timerp_class_init(ObjectClass *klass, void *data)
 660 {
 661     DeviceClass *dc  = DEVICE_CLASS(klass);
 662     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
 663     k->init = imx_timerp_init;
 664     dc->vmsd = &vmstate_imx_timerp;
 665     dc->reset = imx_timerp_reset;
 666     dc->desc = "i.MX periodic timer";
 667 }
 668
 669 static const TypeInfo imx_timerp_info = {
 670     .name = "imx_timerp",
 671     .parent = TYPE_SYS_BUS_DEVICE,
 672     .instance_size = sizeof(IMXTimerPState),
 673     .class_init = imx_timerp_class_init,
 674 };
 675
 676 static const TypeInfo imx_timerg_info = {
 677     .name = "imx_timerg",
 678     .parent = TYPE_SYS_BUS_DEVICE,
 679     .instance_size = sizeof(IMXTimerGState),
 680     .class_init = imx_timerg_class_init,
 681 };
 682
 683 static void imx_timer_register_types(void)
 684 {
 685     type_register_static(&imx_timerp_info);
 686     type_register_static(&imx_timerg_info);
 687 }
 688
 689 type_init(imx_timer_register_types)