qmp-commands.hx

   1 HXCOMM QMP dispatch table and documentation
   2 HXCOMM Text between SQMP and EQMP is copied to the QMP documention file and
   3 HXCOMM does not show up in the other formats.
   4
   5 SQMP
   6                         QMP Supported Commands
   7                         ----------------------
   8
   9 This document describes all commands currently supported by QMP.
  10
  11 Most of the time their usage is exactly the same as in the user Monitor, this
  12 means that any other document which also describe commands (the manpage,
  13 QEMU's manual, etc) can and should be consulted.
  14
  15 QMP has two types of commands: regular and query commands. Regular commands
  16 usually change the Virtual Machine's state someway, while query commands just
  17 return information. The sections below are divided accordingly.
  18
  19 It's important to observe that all communication examples are formatted in
  20 a reader-friendly way, so that they're easier to understand. However, in real
  21 protocol usage, they're emitted as a single line.
  22
  23 Also, the following notation is used to denote data flow:
  24
  25 -> data issued by the Client
  26 <- Server data response
  27
  28 Please, refer to the QMP specification (QMP/qmp-spec.txt) for detailed
  29 information on the Server command and response formats.
  30
  31 NOTE: This document is temporary and will be replaced soon.
  32
  33 1. Stability Considerations
  34 ===========================
  35
  36 The current QMP command set (described in this file) may be useful for a
  37 number of use cases, however it's limited and several commands have bad
  38 defined semantics, specially with regard to command completion.
  39
  40 These problems are going to be solved incrementally in the next QEMU releases
  41 and we're going to establish a deprecation policy for badly defined commands.
  42
  43 If you're planning to adopt QMP, please observe the following:
  44
  45     1. The deprecation policy will take effect and be documented soon, please
  46        check the documentation of each used command as soon as a new release of
  47        QEMU is available
  48
  49     2. DO NOT rely on anything which is not explicit documented
  50
  51     3. Errors, in special, are not documented. Applications should NOT check
  52        for specific errors classes or data (it's strongly recommended to only
  53        check for the "error" key)
  54
  55 2. Regular Commands
  56 ===================
  57
  58 Server's responses in the examples below are always a success response, please
  59 refer to the QMP specification for more details on error responses.
  60
  61 EQMP
  62
  63     {
  64         .name       = "quit",
  65         .args_type  = "",
  66         .mhandler.cmd_new = qmp_marshal_input_quit,
  67     },
  68
  69 SQMP
  70 quit
  71 ----
  72
  73 Quit the emulator.
  74
  75 Arguments: None.
  76
  77 Example:
  78
  79 -> { "execute": "quit" }
  80 <- { "return": {} }
  81
  82 EQMP
  83
  84     {
  85         .name       = "eject",
  86         .args_type  = "force:-f,device:B",
  87         .mhandler.cmd_new = qmp_marshal_input_eject,
  88     },
  89
  90 SQMP
  91 eject
  92 -----
  93
  94 Eject a removable medium.
  95
  96 Arguments:
  97
  98 - force: force ejection (json-bool, optional)
  99 - device: device name (json-string)
 100
 101 Example:
 102
 103 -> { "execute": "eject", "arguments": { "device": "ide1-cd0" } }
 104 <- { "return": {} }
 105
 106 Note: The "force" argument defaults to false.
 107
 108 EQMP
 109
 110     {
 111         .name       = "change",
 112         .args_type  = "device:B,target:F,arg:s?",
 113         .mhandler.cmd_new = qmp_marshal_input_change,
 114     },
 115
 116 SQMP
 117 change
 118 ------
 119
 120 Change a removable medium or VNC configuration.
 121
 122 Arguments:
 123
 124 - "device": device name (json-string)
 125 - "target": filename or item (json-string)
 126 - "arg": additional argument (json-string, optional)
 127
 128 Examples:
 129
 130 1. Change a removable medium
 131
 132 -> { "execute": "change",
 133              "arguments": { "device": "ide1-cd0",
 134                             "target": "/srv/images/Fedora-12-x86_64-DVD.iso" } }
 135 <- { "return": {} }
 136
 137 2. Change VNC password
 138
 139 -> { "execute": "change",
 140              "arguments": { "device": "vnc", "target": "password",
 141                             "arg": "foobar1" } }
 142 <- { "return": {} }
 143
 144 EQMP
 145
 146     {
 147         .name       = "screendump",
 148         .args_type  = "filename:F",
 149         .mhandler.cmd_new = qmp_marshal_input_screendump,
 150     },
 151
 152 SQMP
 153 screendump
 154 ----------
 155
 156 Save screen into PPM image.
 157
 158 Arguments:
 159
 160 - "filename": file path (json-string)
 161
 162 Example:
 163
 164 -> { "execute": "screendump", "arguments": { "filename": "/tmp/image" } }
 165 <- { "return": {} }
 166
 167 EQMP
 168
 169     {
 170         .name       = "stop",
 171         .args_type  = "",
 172         .mhandler.cmd_new = qmp_marshal_input_stop,
 173     },
 174
 175 SQMP
 176 stop
 177 ----
 178
 179 Stop the emulator.
 180
 181 Arguments: None.
 182
 183 Example:
 184
 185 -> { "execute": "stop" }
 186 <- { "return": {} }
 187
 188 EQMP
 189
 190     {
 191         .name       = "cont",
 192         .args_type  = "",
 193         .mhandler.cmd_new = qmp_marshal_input_cont,
 194     },
 195
 196 SQMP
 197 cont
 198 ----
 199
 200 Resume emulation.
 201
 202 Arguments: None.
 203
 204 Example:
 205
 206 -> { "execute": "cont" }
 207 <- { "return": {} }
 208
 209 EQMP
 210
 211     {
 212         .name       = "system_wakeup",
 213         .args_type  = "",
 214         .mhandler.cmd_new = qmp_marshal_input_system_wakeup,
 215     },
 216
 217 SQMP
 218 system_wakeup
 219 -------------
 220
 221 Wakeup guest from suspend.
 222
 223 Arguments: None.
 224
 225 Example:
 226
 227 -> { "execute": "system_wakeup" }
 228 <- { "return": {} }
 229
 230 EQMP
 231
 232     {
 233         .name       = "system_reset",
 234         .args_type  = "",
 235         .mhandler.cmd_new = qmp_marshal_input_system_reset,
 236     },
 237
 238 SQMP
 239 system_reset
 240 ------------
 241
 242 Reset the system.
 243
 244 Arguments: None.
 245
 246 Example:
 247
 248 -> { "execute": "system_reset" }
 249 <- { "return": {} }
 250
 251 EQMP
 252
 253     {
 254         .name       = "system_powerdown",
 255         .args_type  = "",
 256         .mhandler.cmd_new = qmp_marshal_input_system_powerdown,
 257     },
 258
 259 SQMP
 260 system_powerdown
 261 ----------------
 262
 263 Send system power down event.
 264
 265 Arguments: None.
 266
 267 Example:
 268
 269 -> { "execute": "system_powerdown" }
 270 <- { "return": {} }
 271
 272 EQMP
 273
 274     {
 275         .name       = "device_add",
 276         .args_type  = "device:O",
 277         .params     = "driver[,prop=value][,...]",
 278         .help       = "add device, like -device on the command line",
 279         .user_print = monitor_user_noop,
 280         .mhandler.cmd_new = do_device_add,
 281     },
 282
 283 SQMP
 284 device_add
 285 ----------
 286
 287 Add a device.
 288
 289 Arguments:
 290
 291 - "driver": the name of the new device's driver (json-string)
 292 - "bus": the device's parent bus (device tree path, json-string, optional)
 293 - "id": the device's ID, must be unique (json-string)
 294 - device properties
 295
 296 Example:
 297
 298 -> { "execute": "device_add", "arguments": { "driver": "e1000", "id": "net1" } }
 299 <- { "return": {} }
 300
 301 Notes:
 302
 303 (1) For detailed information about this command, please refer to the
 304     'docs/qdev-device-use.txt' file.
 305
 306 (2) It's possible to list device properties by running QEMU with the
 307     "-device DEVICE,\?" command-line argument, where DEVICE is the device's name
 308
 309 EQMP
 310
 311     {
 312         .name       = "device_del",
 313         .args_type  = "id:s",
 314         .mhandler.cmd_new = qmp_marshal_input_device_del,
 315     },
 316
 317 SQMP
 318 device_del
 319 ----------
 320
 321 Remove a device.
 322
 323 Arguments:
 324
 325 - "id": the device's ID (json-string)
 326
 327 Example:
 328
 329 -> { "execute": "device_del", "arguments": { "id": "net1" } }
 330 <- { "return": {} }
 331
 332 EQMP
 333
 334     {
 335         .name       = "send-key",
 336         .args_type  = "keys:O,hold-time:i?",
 337         .mhandler.cmd_new = qmp_marshal_input_send_key,
 338     },
 339
 340 SQMP
 341 send-key
 342 ----------
 343
 344 Send keys to VM.
 345
 346 Arguments:
 347
 348 keys array:
 349     - "key": key sequence (a json-array of key union values,
 350              union can be number or qcode enum)
 351
 352 - hold-time: time to delay key up events, milliseconds. Defaults to 100
 353              (json-int, optional)
 354
 355 Example:
 356
 357 -> { "execute": "send-key",
 358      "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" },
 359                               { "type": "qcode", "data": "alt" },
 360                               { "type": "qcode", "data": "delete" } ] } }
 361 <- { "return": {} }
 362
 363 EQMP
 364
 365     {
 366         .name       = "cpu",
 367         .args_type  = "index:i",
 368         .mhandler.cmd_new = qmp_marshal_input_cpu,
 369     },
 370
 371 SQMP
 372 cpu
 373 ---
 374
 375 Set the default CPU.
 376
 377 Arguments:
 378
 379 - "index": the CPU's index (json-int)
 380
 381 Example:
 382
 383 -> { "execute": "cpu", "arguments": { "index": 0 } }
 384 <- { "return": {} }
 385
 386 Note: CPUs' indexes are obtained with the 'query-cpus' command.
 387
 388 EQMP
 389
 390     {
 391         .name       = "cpu-add",
 392         .args_type  = "id:i",
 393         .mhandler.cmd_new = qmp_marshal_input_cpu_add,
 394     },
 395
 396 SQMP
 397 cpu-add
 398 -------
 399
 400 Adds virtual cpu
 401
 402 Arguments:
 403
 404 - "id": cpu id (json-int)
 405
 406 Example:
 407
 408 -> { "execute": "cpu-add", "arguments": { "id": 2 } }
 409 <- { "return": {} }
 410
 411 EQMP
 412
 413     {
 414         .name       = "memsave",
 415         .args_type  = "val:l,size:i,filename:s,cpu:i?",
 416         .mhandler.cmd_new = qmp_marshal_input_memsave,
 417     },
 418
 419 SQMP
 420 memsave
 421 -------
 422
 423 Save to disk virtual memory dump starting at 'val' of size 'size'.
 424
 425 Arguments:
 426
 427 - "val": the starting address (json-int)
 428 - "size": the memory size, in bytes (json-int)
 429 - "filename": file path (json-string)
 430 - "cpu": virtual CPU index (json-int, optional)
 431
 432 Example:
 433
 434 -> { "execute": "memsave",
 435              "arguments": { "val": 10,
 436                             "size": 100,
 437                             "filename": "/tmp/virtual-mem-dump" } }
 438 <- { "return": {} }
 439
 440 EQMP
 441
 442     {
 443         .name       = "pmemsave",
 444         .args_type  = "val:l,size:i,filename:s",
 445         .mhandler.cmd_new = qmp_marshal_input_pmemsave,
 446     },
 447
 448 SQMP
 449 pmemsave
 450 --------
 451
 452 Save to disk physical memory dump starting at 'val' of size 'size'.
 453
 454 Arguments:
 455
 456 - "val": the starting address (json-int)
 457 - "size": the memory size, in bytes (json-int)
 458 - "filename": file path (json-string)
 459
 460 Example:
 461
 462 -> { "execute": "pmemsave",
 463              "arguments": { "val": 10,
 464                             "size": 100,
 465                             "filename": "/tmp/physical-mem-dump" } }
 466 <- { "return": {} }
 467
 468 EQMP
 469
 470     {
 471         .name       = "inject-nmi",
 472         .args_type  = "",
 473         .mhandler.cmd_new = qmp_marshal_input_inject_nmi,
 474     },
 475
 476 SQMP
 477 inject-nmi
 478 ----------
 479
 480 Inject an NMI on guest's CPUs.
 481
 482 Arguments: None.
 483
 484 Example:
 485
 486 -> { "execute": "inject-nmi" }
 487 <- { "return": {} }
 488
 489 Note: inject-nmi fails when the guest doesn't support injecting.
 490       Currently, only x86 (NMI) and s390x (RESTART) guests do.
 491
 492 EQMP
 493
 494     {
 495         .name       = "ringbuf-write",
 496         .args_type  = "device:s,data:s,format:s?",
 497         .mhandler.cmd_new = qmp_marshal_input_ringbuf_write,
 498     },
 499
 500 SQMP
 501 ringbuf-write
 502 -------------
 503
 504 Write to a ring buffer character device.
 505
 506 Arguments:
 507
 508 - "device": ring buffer character device name (json-string)
 509 - "data": data to write (json-string)
 510 - "format": data format (json-string, optional)
 511           - Possible values: "utf8" (default), "base64"
 512             Bug: invalid base64 is currently not rejected.
 513             Whitespace *is* invalid.
 514
 515 Example:
 516
 517 -> { "execute": "ringbuf-write",
 518                 "arguments": { "device": "foo",
 519                                "data": "abcdefgh",
 520                                "format": "utf8" } }
 521 <- { "return": {} }
 522
 523 EQMP
 524
 525     {
 526         .name       = "ringbuf-read",
 527         .args_type  = "device:s,size:i,format:s?",
 528         .mhandler.cmd_new = qmp_marshal_input_ringbuf_read,
 529     },
 530
 531 SQMP
 532 ringbuf-read
 533 -------------
 534
 535 Read from a ring buffer character device.
 536
 537 Arguments:
 538
 539 - "device": ring buffer character device name (json-string)
 540 - "size": how many bytes to read at most (json-int)
 541           - Number of data bytes, not number of characters in encoded data
 542 - "format": data format (json-string, optional)
 543           - Possible values: "utf8" (default), "base64"
 544           - Naturally, format "utf8" works only when the ring buffer
 545             contains valid UTF-8 text.  Invalid UTF-8 sequences get
 546             replaced.  Bug: replacement doesn't work.  Bug: can screw
 547             up on encountering NUL characters, after the ring buffer
 548             lost data, and when reading stops because the size limit
 549             is reached.
 550
 551 Example:
 552
 553 -> { "execute": "ringbuf-read",
 554                 "arguments": { "device": "foo",
 555                                "size": 1000,
 556                                "format": "utf8" } }
 557 <- {"return": "abcdefgh"}
 558
 559 EQMP
 560
 561     {
 562         .name       = "xen-save-devices-state",
 563         .args_type  = "filename:F",
 564     .mhandler.cmd_new = qmp_marshal_input_xen_save_devices_state,
 565     },
 566
 567 SQMP
 568 xen-save-devices-state
 569 -------
 570
 571 Save the state of all devices to file. The RAM and the block devices
 572 of the VM are not saved by this command.
 573
 574 Arguments:
 575
 576 - "filename": the file to save the state of the devices to as binary
 577 data. See xen-save-devices-state.txt for a description of the binary
 578 format.
 579
 580 Example:
 581
 582 -> { "execute": "xen-save-devices-state",
 583      "arguments": { "filename": "/tmp/save" } }
 584 <- { "return": {} }
 585
 586 EQMP
 587
 588     {
 589         .name       = "xen-set-global-dirty-log",
 590         .args_type  = "enable:b",
 591         .mhandler.cmd_new = qmp_marshal_input_xen_set_global_dirty_log,
 592     },
 593
 594 SQMP
 595 xen-set-global-dirty-log
 596 -------
 597
 598 Enable or disable the global dirty log mode.
 599
 600 Arguments:
 601
 602 - "enable": Enable it or disable it.
 603
 604 Example:
 605
 606 -> { "execute": "xen-set-global-dirty-log",
 607      "arguments": { "enable": true } }
 608 <- { "return": {} }
 609
 610 EQMP
 611
 612     {
 613         .name       = "migrate",
 614         .args_type  = "detach:-d,blk:-b,inc:-i,uri:s",
 615         .mhandler.cmd_new = qmp_marshal_input_migrate,
 616     },
 617
 618 SQMP
 619 migrate
 620 -------
 621
 622 Migrate to URI.
 623
 624 Arguments:
 625
 626 - "blk": block migration, full disk copy (json-bool, optional)
 627 - "inc": incremental disk copy (json-bool, optional)
 628 - "uri": Destination URI (json-string)
 629
 630 Example:
 631
 632 -> { "execute": "migrate", "arguments": { "uri": "tcp:0:4446" } }
 633 <- { "return": {} }
 634
 635 Notes:
 636
 637 (1) The 'query-migrate' command should be used to check migration's progress
 638     and final result (this information is provided by the 'status' member)
 639 (2) All boolean arguments default to false
 640 (3) The user Monitor's "detach" argument is invalid in QMP and should not
 641     be used
 642
 643 EQMP
 644
 645     {
 646         .name       = "migrate_cancel",
 647         .args_type  = "",
 648         .mhandler.cmd_new = qmp_marshal_input_migrate_cancel,
 649     },
 650
 651 SQMP
 652 migrate_cancel
 653 --------------
 654
 655 Cancel the current migration.
 656
 657 Arguments: None.
 658
 659 Example:
 660
 661 -> { "execute": "migrate_cancel" }
 662 <- { "return": {} }
 663
 664 EQMP
 665 {
 666         .name       = "migrate-set-cache-size",
 667         .args_type  = "value:o",
 668         .mhandler.cmd_new = qmp_marshal_input_migrate_set_cache_size,
 669     },
 670
 671 SQMP
 672 migrate-set-cache-size
 673 ----------------------
 674
 675 Set cache size to be used by XBZRLE migration, the cache size will be rounded
 676 down to the nearest power of 2
 677
 678 Arguments:
 679
 680 - "value": cache size in bytes (json-int)
 681
 682 Example:
 683
 684 -> { "execute": "migrate-set-cache-size", "arguments": { "value": 536870912 } }
 685 <- { "return": {} }
 686
 687 EQMP
 688     {
 689         .name       = "query-migrate-cache-size",
 690         .args_type  = "",
 691         .mhandler.cmd_new = qmp_marshal_input_query_migrate_cache_size,
 692     },
 693
 694 SQMP
 695 query-migrate-cache-size
 696 ------------------------
 697
 698 Show cache size to be used by XBZRLE migration
 699
 700 returns a json-object with the following information:
 701 - "size" : json-int
 702
 703 Example:
 704
 705 -> { "execute": "query-migrate-cache-size" }
 706 <- { "return": 67108864 }
 707
 708 EQMP
 709
 710     {
 711         .name       = "migrate_set_speed",
 712         .args_type  = "value:o",
 713         .mhandler.cmd_new = qmp_marshal_input_migrate_set_speed,
 714     },
 715
 716 SQMP
 717 migrate_set_speed
 718 -----------------
 719
 720 Set maximum speed for migrations.
 721
 722 Arguments:
 723
 724 - "value": maximum speed, in bytes per second (json-int)
 725
 726 Example:
 727
 728 -> { "execute": "migrate_set_speed", "arguments": { "value": 1024 } }
 729 <- { "return": {} }
 730
 731 EQMP
 732
 733     {
 734         .name       = "migrate_set_downtime",
 735         .args_type  = "value:T",
 736         .mhandler.cmd_new = qmp_marshal_input_migrate_set_downtime,
 737     },
 738
 739 SQMP
 740 migrate_set_downtime
 741 --------------------
 742
 743 Set maximum tolerated downtime (in seconds) for migrations.
 744
 745 Arguments:
 746
 747 - "value": maximum downtime (json-number)
 748
 749 Example:
 750
 751 -> { "execute": "migrate_set_downtime", "arguments": { "value": 0.1 } }
 752 <- { "return": {} }
 753
 754 EQMP
 755
 756     {
 757         .name       = "client_migrate_info",
 758         .args_type  = "protocol:s,hostname:s,port:i?,tls-port:i?,cert-subject:s?",
 759         .params     = "protocol hostname port tls-port cert-subject",
 760         .help       = "send migration info to spice/vnc client",
 761         .user_print = monitor_user_noop,
 762         .mhandler.cmd_async = client_migrate_info,
 763         .flags      = MONITOR_CMD_ASYNC,
 764     },
 765
 766 SQMP
 767 client_migrate_info
 768 ------------------
 769
 770 Set the spice/vnc connection info for the migration target.  The spice/vnc
 771 server will ask the spice/vnc client to automatically reconnect using the
 772 new parameters (if specified) once the vm migration finished successfully.
 773
 774 Arguments:
 775
 776 - "protocol":     protocol: "spice" or "vnc" (json-string)
 777 - "hostname":     migration target hostname (json-string)
 778 - "port":         spice/vnc tcp port for plaintext channels (json-int, optional)
 779 - "tls-port":     spice tcp port for tls-secured channels (json-int, optional)
 780 - "cert-subject": server certificate subject (json-string, optional)
 781
 782 Example:
 783
 784 -> { "execute": "client_migrate_info",
 785      "arguments": { "protocol": "spice",
 786                     "hostname": "virt42.lab.kraxel.org",
 787                     "port": 1234 } }
 788 <- { "return": {} }
 789
 790 EQMP
 791
 792     {
 793         .name       = "dump-guest-memory",
 794         .args_type  = "paging:b,protocol:s,begin:i?,end:i?,format:s?",
 795         .params     = "-p protocol [begin] [length] [format]",
 796         .help       = "dump guest memory to file",
 797         .user_print = monitor_user_noop,
 798         .mhandler.cmd_new = qmp_marshal_input_dump_guest_memory,
 799     },
 800
 801 SQMP
 802 dump
 803
 804
 805 Dump guest memory to file. The file can be processed with crash or gdb.
 806
 807 Arguments:
 808
 809 - "paging": do paging to get guest's memory mapping (json-bool)
 810 - "protocol": destination file(started with "file:") or destination file
 811               descriptor (started with "fd:") (json-string)
 812 - "begin": the starting physical address. It's optional, and should be specified
 813            with length together (json-int)
 814 - "length": the memory size, in bytes. It's optional, and should be specified
 815             with begin together (json-int)
 816 - "format": the format of guest memory dump. It's optional, and can be
 817             elf|kdump-zlib|kdump-lzo|kdump-snappy, but non-elf formats will
 818             conflict with paging and filter, ie. begin and length (json-string)
 819
 820 Example:
 821
 822 -> { "execute": "dump-guest-memory", "arguments": { "protocol": "fd:dump" } }
 823 <- { "return": {} }
 824
 825 Notes:
 826
 827 (1) All boolean arguments default to false
 828
 829 EQMP
 830
 831     {
 832         .name       = "query-dump-guest-memory-capability",
 833         .args_type  = "",
 834     .mhandler.cmd_new = qmp_marshal_input_query_dump_guest_memory_capability,
 835     },
 836
 837 SQMP
 838 query-dump-guest-memory-capability
 839 ----------
 840
 841 Show available formats for 'dump-guest-memory'
 842
 843 Example:
 844
 845 -> { "execute": "query-dump-guest-memory-capability" }
 846 <- { "return": { "formats":
 847                     ["elf", "kdump-zlib", "kdump-lzo", "kdump-snappy"] }
 848
 849 EQMP
 850
 851     {
 852         .name       = "netdev_add",
 853         .args_type  = "netdev:O",
 854         .mhandler.cmd_new = qmp_netdev_add,
 855     },
 856
 857 SQMP
 858 netdev_add
 859 ----------
 860
 861 Add host network device.
 862
 863 Arguments:
 864
 865 - "type": the device type, "tap", "user", ... (json-string)
 866 - "id": the device's ID, must be unique (json-string)
 867 - device options
 868
 869 Example:
 870
 871 -> { "execute": "netdev_add", "arguments": { "type": "user", "id": "netdev1" } }
 872 <- { "return": {} }
 873
 874 Note: The supported device options are the same ones supported by the '-netdev'
 875       command-line argument, which are listed in the '-help' output or QEMU's
 876       manual
 877
 878 EQMP
 879
 880     {
 881         .name       = "netdev_del",
 882         .args_type  = "id:s",
 883         .mhandler.cmd_new = qmp_marshal_input_netdev_del,
 884     },
 885
 886 SQMP
 887 netdev_del
 888 ----------
 889
 890 Remove host network device.
 891
 892 Arguments:
 893
 894 - "id": the device's ID, must be unique (json-string)
 895
 896 Example:
 897
 898 -> { "execute": "netdev_del", "arguments": { "id": "netdev1" } }
 899 <- { "return": {} }
 900
 901
 902 EQMP
 903
 904     {
 905         .name       = "object-add",
 906         .args_type  = "qom-type:s,id:s,props:q?",
 907         .mhandler.cmd_new = qmp_object_add,
 908     },
 909
 910 SQMP
 911 object-add
 912 ----------
 913
 914 Create QOM object.
 915
 916 Arguments:
 917
 918 - "qom-type": the object's QOM type, i.e. the class name (json-string)
 919 - "id": the object's ID, must be unique (json-string)
 920 - "props": a dictionary of object property values (optional, json-dict)
 921
 922 Example:
 923
 924 -> { "execute": "object-add", "arguments": { "qom-type": "rng-random", "id": "rng1",
 925      "props": { "filename": "/dev/hwrng" } } }
 926 <- { "return": {} }
 927
 928 EQMP
 929
 930     {
 931         .name       = "object-del",
 932         .args_type  = "id:s",
 933         .mhandler.cmd_new = qmp_marshal_input_object_del,
 934     },
 935
 936 SQMP
 937 object-del
 938 ----------
 939
 940 Remove QOM object.
 941
 942 Arguments:
 943
 944 - "id": the object's ID (json-string)
 945
 946 Example:
 947
 948 -> { "execute": "object-del", "arguments": { "id": "rng1" } }
 949 <- { "return": {} }
 950
 951
 952 EQMP
 953
 954
 955     {
 956         .name       = "block_resize",
 957         .args_type  = "device:s?,node-name:s?,size:o",
 958         .mhandler.cmd_new = qmp_marshal_input_block_resize,
 959     },
 960
 961 SQMP
 962 block_resize
 963 ------------
 964
 965 Resize a block image while a guest is running.
 966
 967 Arguments:
 968
 969 - "device": the device's ID, must be unique (json-string)
 970 - "node-name": the node name in the block driver state graph (json-string)
 971 - "size": new size
 972
 973 Example:
 974
 975 -> { "execute": "block_resize", "arguments": { "device": "scratch", "size": 1073741824 } }
 976 <- { "return": {} }
 977
 978 EQMP
 979
 980     {
 981         .name       = "block-stream",
 982         .args_type  = "device:B,base:s?,speed:o?,on-error:s?",
 983         .mhandler.cmd_new = qmp_marshal_input_block_stream,
 984     },
 985
 986     {
 987         .name       = "block-commit",
 988         .args_type  = "device:B,base:s?,top:s,speed:o?",
 989         .mhandler.cmd_new = qmp_marshal_input_block_commit,
 990     },
 991
 992 SQMP
 993 block-commit
 994 ------------
 995
 996 Live commit of data from overlay image nodes into backing nodes - i.e., writes
 997 data between 'top' and 'base' into 'base'.
 998
 999 Arguments:
1000
1001 - "device": The device's ID, must be unique (json-string)
1002 - "base": The file name of the backing image to write data into.
1003           If not specified, this is the deepest backing image
1004           (json-string, optional)
1005 - "top":  The file name of the backing image within the image chain,
1006           which contains the topmost data to be committed down.
1007
1008           If top == base, that is an error.
1009           If top == active, the job will not be completed by itself,
1010           user needs to complete the job with the block-job-complete
1011           command after getting the ready event. (Since 2.0)
1012
1013           If the base image is smaller than top, then the base image
1014           will be resized to be the same size as top.  If top is
1015           smaller than the base image, the base will not be
1016           truncated.  If you want the base image size to match the
1017           size of the smaller top, you can safely truncate it
1018           yourself once the commit operation successfully completes.
1019           (json-string)
1020 - "speed":  the maximum speed, in bytes per second (json-int, optional)
1021
1022
1023 Example:
1024
1025 -> { "execute": "block-commit", "arguments": { "device": "virtio0",
1026                                               "top": "/tmp/snap1.qcow2" } }
1027 <- { "return": {} }
1028
1029 EQMP
1030
1031     {
1032         .name       = "drive-backup",
1033         .args_type  = "sync:s,device:B,target:s,speed:i?,mode:s?,format:s?,"
1034                       "on-source-error:s?,on-target-error:s?",
1035         .mhandler.cmd_new = qmp_marshal_input_drive_backup,
1036     },
1037
1038 SQMP
1039 drive-backup
1040 ------------
1041
1042 Start a point-in-time copy of a block device to a new destination.  The
1043 status of ongoing drive-backup operations can be checked with
1044 query-block-jobs where the BlockJobInfo.type field has the value 'backup'.
1045 The operation can be stopped before it has completed using the
1046 block-job-cancel command.
1047
1048 Arguments:
1049
1050 - "device": the name of the device which should be copied.
1051             (json-string)
1052 - "target": the target of the new image. If the file exists, or if it is a
1053             device, the existing file/device will be used as the new
1054             destination.  If it does not exist, a new file will be created.
1055             (json-string)
1056 - "format": the format of the new destination, default is to probe if 'mode' is
1057             'existing', else the format of the source
1058             (json-string, optional)
1059 - "sync": what parts of the disk image should be copied to the destination;
1060   possibilities include "full" for all the disk, "top" for only the sectors
1061   allocated in the topmost image, or "none" to only replicate new I/O
1062   (MirrorSyncMode).
1063 - "mode": whether and how QEMU should create a new image
1064           (NewImageMode, optional, default 'absolute-paths')
1065 - "speed": the maximum speed, in bytes per second (json-int, optional)
1066 - "on-source-error": the action to take on an error on the source, default
1067                      'report'.  'stop' and 'enospc' can only be used
1068                      if the block device supports io-status.
1069                      (BlockdevOnError, optional)
1070 - "on-target-error": the action to take on an error on the target, default
1071                      'report' (no limitations, since this applies to
1072                      a different block device than device).
1073                      (BlockdevOnError, optional)
1074
1075 Example:
1076 -> { "execute": "drive-backup", "arguments": { "device": "drive0",
1077                                                "sync": "full",
1078                                                "target": "backup.img" } }
1079 <- { "return": {} }
1080 EQMP
1081
1082     {
1083         .name       = "block-job-set-speed",
1084         .args_type  = "device:B,speed:o",
1085         .mhandler.cmd_new = qmp_marshal_input_block_job_set_speed,
1086     },
1087
1088     {
1089         .name       = "block-job-cancel",
1090         .args_type  = "device:B,force:b?",
1091         .mhandler.cmd_new = qmp_marshal_input_block_job_cancel,
1092     },
1093     {
1094         .name       = "block-job-pause",
1095         .args_type  = "device:B",
1096         .mhandler.cmd_new = qmp_marshal_input_block_job_pause,
1097     },
1098     {
1099         .name       = "block-job-resume",
1100         .args_type  = "device:B",
1101         .mhandler.cmd_new = qmp_marshal_input_block_job_resume,
1102     },
1103     {
1104         .name       = "block-job-complete",
1105         .args_type  = "device:B",
1106         .mhandler.cmd_new = qmp_marshal_input_block_job_complete,
1107     },
1108     {
1109         .name       = "transaction",
1110         .args_type  = "actions:q",
1111         .mhandler.cmd_new = qmp_marshal_input_transaction,
1112     },
1113
1114 SQMP
1115 transaction
1116 -----------
1117
1118 Atomically operate on one or more block devices.  The only supported operations
1119 for now are drive-backup, internal and external snapshotting.  A list of
1120 dictionaries is accepted, that contains the actions to be performed.
1121 If there is any failure performing any of the operations, all operations
1122 for the group are abandoned.
1123
1124 For external snapshots, the dictionary contains the device, the file to use for
1125 the new snapshot, and the format.  The default format, if not specified, is
1126 qcow2.
1127
1128 Each new snapshot defaults to being created by QEMU (wiping any
1129 contents if the file already exists), but it is also possible to reuse
1130 an externally-created file.  In the latter case, you should ensure that
1131 the new image file has the same contents as the current one; QEMU cannot
1132 perform any meaningful check.  Typically this is achieved by using the
1133 current image file as the backing file for the new image.
1134
1135 On failure, the original disks pre-snapshot attempt will be used.
1136
1137 For internal snapshots, the dictionary contains the device and the snapshot's
1138 name.  If an internal snapshot matching name already exists, the request will
1139 be rejected.  Only some image formats support it, for example, qcow2, rbd,
1140 and sheepdog.
1141
1142 On failure, qemu will try delete the newly created internal snapshot in the
1143 transaction.  When an I/O error occurs during deletion, the user needs to fix
1144 it later with qemu-img or other command.
1145
1146 Arguments:
1147
1148 actions array:
1149     - "type": the operation to perform.  The only supported
1150       value is "blockdev-snapshot-sync". (json-string)
1151     - "data": a dictionary.  The contents depend on the value
1152       of "type".  When "type" is "blockdev-snapshot-sync":
1153       - "device": device name to snapshot (json-string)
1154       - "node-name": graph node name to snapshot (json-string)
1155       - "snapshot-file": name of new image file (json-string)
1156       - "snapshot-node-name": graph node name of the new snapshot (json-string)
1157       - "format": format of new image (json-string, optional)
1158       - "mode": whether and how QEMU should create the snapshot file
1159         (NewImageMode, optional, default "absolute-paths")
1160       When "type" is "blockdev-snapshot-internal-sync":
1161       - "device": device name to snapshot (json-string)
1162       - "name": name of the new snapshot (json-string)
1163
1164 Example:
1165
1166 -> { "execute": "transaction",
1167      "arguments": { "actions": [
1168          { "type": "blockdev-snapshot-sync", "data" : { "device": "ide-hd0",
1169                                          "snapshot-file": "/some/place/my-image",
1170                                          "format": "qcow2" } },
1171          { "type": "blockdev-snapshot-sync", "data" : { "node-name": "myfile",
1172                                          "snapshot-file": "/some/place/my-image2",
1173                                          "snapshot-node-name": "node3432",
1174                                          "mode": "existing",
1175                                          "format": "qcow2" } },
1176          { "type": "blockdev-snapshot-sync", "data" : { "device": "ide-hd1",
1177                                          "snapshot-file": "/some/place/my-image2",
1178                                          "mode": "existing",
1179                                          "format": "qcow2" } },
1180          { "type": "blockdev-snapshot-internal-sync", "data" : {
1181                                          "device": "ide-hd2",
1182                                          "name": "snapshot0" } } ] } }
1183 <- { "return": {} }
1184
1185 EQMP
1186
1187     {
1188         .name       = "blockdev-snapshot-sync",
1189         .args_type  = "device:s?,node-name:s?,snapshot-file:s,snapshot-node-name:s?,format:s?,mode:s?",
1190         .mhandler.cmd_new = qmp_marshal_input_blockdev_snapshot_sync,
1191     },
1192
1193 SQMP
1194 blockdev-snapshot-sync
1195 ----------------------
1196
1197 Synchronous snapshot of a block device. snapshot-file specifies the
1198 target of the new image. If the file exists, or if it is a device, the
1199 snapshot will be created in the existing file/device. If does not
1200 exist, a new file will be created. format specifies the format of the
1201 snapshot image, default is qcow2.
1202
1203 Arguments:
1204
1205 - "device": device name to snapshot (json-string)
1206 - "node-name": graph node name to snapshot (json-string)
1207 - "snapshot-file": name of new image file (json-string)
1208 - "snapshot-node-name": graph node name of the new snapshot (json-string)
1209 - "mode": whether and how QEMU should create the snapshot file
1210   (NewImageMode, optional, default "absolute-paths")
1211 - "format": format of new image (json-string, optional)
1212
1213 Example:
1214
1215 -> { "execute": "blockdev-snapshot-sync", "arguments": { "device": "ide-hd0",
1216                                                          "snapshot-file":
1217                                                         "/some/place/my-image",
1218                                                         "format": "qcow2" } }
1219 <- { "return": {} }
1220
1221 EQMP
1222
1223     {
1224         .name       = "blockdev-snapshot-internal-sync",
1225         .args_type  = "device:B,name:s",
1226         .mhandler.cmd_new = qmp_marshal_input_blockdev_snapshot_internal_sync,
1227     },
1228
1229 SQMP
1230 blockdev-snapshot-internal-sync
1231 -------------------------------
1232
1233 Synchronously take an internal snapshot of a block device when the format of
1234 image used supports it.  If the name is an empty string, or a snapshot with
1235 name already exists, the operation will fail.
1236
1237 Arguments:
1238
1239 - "device": device name to snapshot (json-string)
1240 - "name": name of the new snapshot (json-string)
1241
1242 Example:
1243
1244 -> { "execute": "blockdev-snapshot-internal-sync",
1245                 "arguments": { "device": "ide-hd0",
1246                                "name": "snapshot0" }
1247    }
1248 <- { "return": {} }
1249
1250 EQMP
1251
1252     {
1253         .name       = "blockdev-snapshot-delete-internal-sync",
1254         .args_type  = "device:B,id:s?,name:s?",
1255         .mhandler.cmd_new =
1256                       qmp_marshal_input_blockdev_snapshot_delete_internal_sync,
1257     },
1258
1259 SQMP
1260 blockdev-snapshot-delete-internal-sync
1261 --------------------------------------
1262
1263 Synchronously delete an internal snapshot of a block device when the format of
1264 image used supports it.  The snapshot is identified by name or id or both.  One
1265 of name or id is required.  If the snapshot is not found, the operation will
1266 fail.
1267
1268 Arguments:
1269
1270 - "device": device name (json-string)
1271 - "id": ID of the snapshot (json-string, optional)
1272 - "name": name of the snapshot (json-string, optional)
1273
1274 Example:
1275
1276 -> { "execute": "blockdev-snapshot-delete-internal-sync",
1277                 "arguments": { "device": "ide-hd0",
1278                                "name": "snapshot0" }
1279    }
1280 <- { "return": {
1281                    "id": "1",
1282                    "name": "snapshot0",
1283                    "vm-state-size": 0,
1284                    "date-sec": 1000012,
1285                    "date-nsec": 10,
1286                    "vm-clock-sec": 100,
1287                    "vm-clock-nsec": 20
1288      }
1289    }
1290
1291 EQMP
1292
1293     {
1294         .name       = "drive-mirror",
1295         .args_type  = "sync:s,device:B,target:s,speed:i?,mode:s?,format:s?,"
1296                       "on-source-error:s?,on-target-error:s?,"
1297                       "granularity:i?,buf-size:i?",
1298         .mhandler.cmd_new = qmp_marshal_input_drive_mirror,
1299     },
1300
1301 SQMP
1302 drive-mirror
1303 ------------
1304
1305 Start mirroring a block device's writes to a new destination. target
1306 specifies the target of the new image. If the file exists, or if it is
1307 a device, it will be used as the new destination for writes. If it does not
1308 exist, a new file will be created. format specifies the format of the
1309 mirror image, default is to probe if mode='existing', else the format
1310 of the source.
1311
1312 Arguments:
1313
1314 - "device": device name to operate on (json-string)
1315 - "target": name of new image file (json-string)
1316 - "format": format of new image (json-string, optional)
1317 - "mode": how an image file should be created into the target
1318   file/device (NewImageMode, optional, default 'absolute-paths')
1319 - "speed": maximum speed of the streaming job, in bytes per second
1320   (json-int)
1321 - "granularity": granularity of the dirty bitmap, in bytes (json-int, optional)
1322 - "buf_size": maximum amount of data in flight from source to target, in bytes
1323   (json-int, default 10M)
1324 - "sync": what parts of the disk image should be copied to the destination;
1325   possibilities include "full" for all the disk, "top" for only the sectors
1326   allocated in the topmost image, or "none" to only replicate new I/O
1327   (MirrorSyncMode).
1328 - "on-source-error": the action to take on an error on the source
1329   (BlockdevOnError, default 'report')
1330 - "on-target-error": the action to take on an error on the target
1331   (BlockdevOnError, default 'report')
1332
1333 The default value of the granularity is the image cluster size clamped
1334 between 4096 and 65536, if the image format defines one.  If the format
1335 does not define a cluster size, the default value of the granularity
1336 is 65536.
1337
1338
1339 Example:
1340
1341 -> { "execute": "drive-mirror", "arguments": { "device": "ide-hd0",
1342                                                "target": "/some/place/my-image",
1343                                                "sync": "full",
1344                                                "format": "qcow2" } }
1345 <- { "return": {} }
1346
1347 EQMP
1348
1349     {
1350         .name       = "balloon",
1351         .args_type  = "value:M",
1352         .mhandler.cmd_new = qmp_marshal_input_balloon,
1353     },
1354
1355 SQMP
1356 balloon
1357 -------
1358
1359 Request VM to change its memory allocation (in bytes).
1360
1361 Arguments:
1362
1363 - "value": New memory allocation (json-int)
1364
1365 Example:
1366
1367 -> { "execute": "balloon", "arguments": { "value": 536870912 } }
1368 <- { "return": {} }
1369
1370 EQMP
1371
1372     {
1373         .name       = "set_link",
1374         .args_type  = "name:s,up:b",
1375         .mhandler.cmd_new = qmp_marshal_input_set_link,
1376     },
1377
1378 SQMP
1379 set_link
1380 --------
1381
1382 Change the link status of a network adapter.
1383
1384 Arguments:
1385
1386 - "name": network device name (json-string)
1387 - "up": status is up (json-bool)
1388
1389 Example:
1390
1391 -> { "execute": "set_link", "arguments": { "name": "e1000.0", "up": false } }
1392 <- { "return": {} }
1393
1394 EQMP
1395
1396     {
1397         .name       = "getfd",
1398         .args_type  = "fdname:s",
1399         .params     = "getfd name",
1400         .help       = "receive a file descriptor via SCM rights and assign it a name",
1401         .mhandler.cmd_new = qmp_marshal_input_getfd,
1402     },
1403
1404 SQMP
1405 getfd
1406 -----
1407
1408 Receive a file descriptor via SCM rights and assign it a name.
1409
1410 Arguments:
1411
1412 - "fdname": file descriptor name (json-string)
1413
1414 Example:
1415
1416 -> { "execute": "getfd", "arguments": { "fdname": "fd1" } }
1417 <- { "return": {} }
1418
1419 Notes:
1420
1421 (1) If the name specified by the "fdname" argument already exists,
1422     the file descriptor assigned to it will be closed and replaced
1423     by the received file descriptor.
1424 (2) The 'closefd' command can be used to explicitly close the file
1425     descriptor when it is no longer needed.
1426
1427 EQMP
1428
1429     {
1430         .name       = "closefd",
1431         .args_type  = "fdname:s",
1432         .params     = "closefd name",
1433         .help       = "close a file descriptor previously passed via SCM rights",
1434         .mhandler.cmd_new = qmp_marshal_input_closefd,
1435     },
1436
1437 SQMP
1438 closefd
1439 -------
1440
1441 Close a file descriptor previously passed via SCM rights.
1442
1443 Arguments:
1444
1445 - "fdname": file descriptor name (json-string)
1446
1447 Example:
1448
1449 -> { "execute": "closefd", "arguments": { "fdname": "fd1" } }
1450 <- { "return": {} }
1451
1452 EQMP
1453
1454      {
1455         .name       = "add-fd",
1456         .args_type  = "fdset-id:i?,opaque:s?",
1457         .params     = "add-fd fdset-id opaque",
1458         .help       = "Add a file descriptor, that was passed via SCM rights, to an fd set",
1459         .mhandler.cmd_new = qmp_marshal_input_add_fd,
1460     },
1461
1462 SQMP
1463 add-fd
1464 -------
1465
1466 Add a file descriptor, that was passed via SCM rights, to an fd set.
1467
1468 Arguments:
1469
1470 - "fdset-id": The ID of the fd set to add the file descriptor to.
1471               (json-int, optional)
1472 - "opaque": A free-form string that can be used to describe the fd.
1473             (json-string, optional)
1474
1475 Return a json-object with the following information:
1476
1477 - "fdset-id": The ID of the fd set that the fd was added to. (json-int)
1478 - "fd": The file descriptor that was received via SCM rights and added to the
1479         fd set. (json-int)
1480
1481 Example:
1482
1483 -> { "execute": "add-fd", "arguments": { "fdset-id": 1 } }
1484 <- { "return": { "fdset-id": 1, "fd": 3 } }
1485
1486 Notes:
1487
1488 (1) The list of fd sets is shared by all monitor connections.
1489 (2) If "fdset-id" is not specified, a new fd set will be created.
1490
1491 EQMP
1492
1493      {
1494         .name       = "remove-fd",
1495         .args_type  = "fdset-id:i,fd:i?",
1496         .params     = "remove-fd fdset-id fd",
1497         .help       = "Remove a file descriptor from an fd set",
1498         .mhandler.cmd_new = qmp_marshal_input_remove_fd,
1499     },
1500
1501 SQMP
1502 remove-fd
1503 ---------
1504
1505 Remove a file descriptor from an fd set.
1506
1507 Arguments:
1508
1509 - "fdset-id": The ID of the fd set that the file descriptor belongs to.
1510               (json-int)
1511 - "fd": The file descriptor that is to be removed. (json-int, optional)
1512
1513 Example:
1514
1515 -> { "execute": "remove-fd", "arguments": { "fdset-id": 1, "fd": 3 } }
1516 <- { "return": {} }
1517
1518 Notes:
1519
1520 (1) The list of fd sets is shared by all monitor connections.
1521 (2) If "fd" is not specified, all file descriptors in "fdset-id" will be
1522     removed.
1523
1524 EQMP
1525
1526     {
1527         .name       = "query-fdsets",
1528         .args_type  = "",
1529         .help       = "Return information describing all fd sets",
1530         .mhandler.cmd_new = qmp_marshal_input_query_fdsets,
1531     },
1532
1533 SQMP
1534 query-fdsets
1535 -------------
1536
1537 Return information describing all fd sets.
1538
1539 Arguments: None
1540
1541 Example:
1542
1543 -> { "execute": "query-fdsets" }
1544 <- { "return": [
1545        {
1546          "fds": [
1547            {
1548              "fd": 30,
1549              "opaque": "rdonly:/path/to/file"
1550            },
1551            {
1552              "fd": 24,
1553              "opaque": "rdwr:/path/to/file"
1554            }
1555          ],
1556          "fdset-id": 1
1557        },
1558        {
1559          "fds": [
1560            {
1561              "fd": 28
1562            },
1563            {
1564              "fd": 29
1565            }
1566          ],
1567          "fdset-id": 0
1568        }
1569      ]
1570    }
1571
1572 Note: The list of fd sets is shared by all monitor connections.
1573
1574 EQMP
1575
1576     {
1577         .name       = "block_passwd",
1578         .args_type  = "device:s?,node-name:s?,password:s",
1579         .mhandler.cmd_new = qmp_marshal_input_block_passwd,
1580     },
1581
1582 SQMP
1583 block_passwd
1584 ------------
1585
1586 Set the password of encrypted block devices.
1587
1588 Arguments:
1589
1590 - "device": device name (json-string)
1591 - "node-name": name in the block driver state graph (json-string)
1592 - "password": password (json-string)
1593
1594 Example:
1595
1596 -> { "execute": "block_passwd", "arguments": { "device": "ide0-hd0",
1597                                                "password": "12345" } }
1598 <- { "return": {} }
1599
1600 EQMP
1601
1602     {
1603         .name       = "block_set_io_throttle",
1604         .args_type  = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l,bps_max:l?,bps_rd_max:l?,bps_wr_max:l?,iops_max:l?,iops_rd_max:l?,iops_wr_max:l?,iops_size:l?",
1605         .mhandler.cmd_new = qmp_marshal_input_block_set_io_throttle,
1606     },
1607
1608 SQMP
1609 block_set_io_throttle
1610 ------------
1611
1612 Change I/O throttle limits for a block drive.
1613
1614 Arguments:
1615
1616 - "device": device name (json-string)
1617 - "bps": total throughput limit in bytes per second (json-int)
1618 - "bps_rd": read throughput limit in bytes per second (json-int)
1619 - "bps_wr": write throughput limit in bytes per second (json-int)
1620 - "iops": total I/O operations per second (json-int)
1621 - "iops_rd": read I/O operations per second (json-int)
1622 - "iops_wr": write I/O operations per second (json-int)
1623 - "bps_max":  total max in bytes (json-int)
1624 - "bps_rd_max":  read max in bytes (json-int)
1625 - "bps_wr_max":  write max in bytes (json-int)
1626 - "iops_max":  total I/O operations max (json-int)
1627 - "iops_rd_max":  read I/O operations max (json-int)
1628 - "iops_wr_max":  write I/O operations max (json-int)
1629 - "iops_size":  I/O size in bytes when limiting (json-int)
1630
1631 Example:
1632
1633 -> { "execute": "block_set_io_throttle", "arguments": { "device": "virtio0",
1634                                                "bps": 1000000,
1635                                                "bps_rd": 0,
1636                                                "bps_wr": 0,
1637                                                "iops": 0,
1638                                                "iops_rd": 0,
1639                                                "iops_wr": 0,
1640                                                "bps_max": 8000000,
1641                                                "bps_rd_max": 0,
1642                                                "bps_wr_max": 0,
1643                                                "iops_max": 0,
1644                                                "iops_rd_max": 0,
1645                                                "iops_wr_max": 0,
1646                                                "iops_size": 0 } }
1647 <- { "return": {} }
1648
1649 EQMP
1650
1651     {
1652         .name       = "set_password",
1653         .args_type  = "protocol:s,password:s,connected:s?",
1654         .mhandler.cmd_new = qmp_marshal_input_set_password,
1655     },
1656
1657 SQMP
1658 set_password
1659 ------------
1660
1661 Set the password for vnc/spice protocols.
1662
1663 Arguments:
1664
1665 - "protocol": protocol name (json-string)
1666 - "password": password (json-string)
1667 - "connected": [ keep | disconnect | fail ] (josn-string, optional)
1668
1669 Example:
1670
1671 -> { "execute": "set_password", "arguments": { "protocol": "vnc",
1672                                                "password": "secret" } }
1673 <- { "return": {} }
1674
1675 EQMP
1676
1677     {
1678         .name       = "expire_password",
1679         .args_type  = "protocol:s,time:s",
1680         .mhandler.cmd_new = qmp_marshal_input_expire_password,
1681     },
1682
1683 SQMP
1684 expire_password
1685 ---------------
1686
1687 Set the password expire time for vnc/spice protocols.
1688
1689 Arguments:
1690
1691 - "protocol": protocol name (json-string)
1692 - "time": [ now | never | +secs | secs ] (json-string)
1693
1694 Example:
1695
1696 -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
1697                                                   "time": "+60" } }
1698 <- { "return": {} }
1699
1700 EQMP
1701
1702     {
1703         .name       = "add_client",
1704         .args_type  = "protocol:s,fdname:s,skipauth:b?,tls:b?",
1705         .mhandler.cmd_new = qmp_marshal_input_add_client,
1706     },
1707
1708 SQMP
1709 add_client
1710 ----------
1711
1712 Add a graphics client
1713
1714 Arguments:
1715
1716 - "protocol": protocol name (json-string)
1717 - "fdname": file descriptor name (json-string)
1718 - "skipauth": whether to skip authentication (json-bool, optional)
1719 - "tls": whether to perform TLS (json-bool, optional)
1720
1721 Example:
1722
1723 -> { "execute": "add_client", "arguments": { "protocol": "vnc",
1724                                              "fdname": "myclient" } }
1725 <- { "return": {} }
1726
1727 EQMP
1728     {
1729         .name       = "qmp_capabilities",
1730         .args_type  = "",
1731         .params     = "",
1732         .help       = "enable QMP capabilities",
1733         .user_print = monitor_user_noop,
1734         .mhandler.cmd_new = do_qmp_capabilities,
1735     },
1736
1737 SQMP
1738 qmp_capabilities
1739 ----------------
1740
1741 Enable QMP capabilities.
1742
1743 Arguments: None.
1744
1745 Example:
1746
1747 -> { "execute": "qmp_capabilities" }
1748 <- { "return": {} }
1749
1750 Note: This command must be issued before issuing any other command.
1751
1752 EQMP
1753
1754     {
1755         .name       = "human-monitor-command",
1756         .args_type  = "command-line:s,cpu-index:i?",
1757         .mhandler.cmd_new = qmp_marshal_input_human_monitor_command,
1758     },
1759
1760 SQMP
1761 human-monitor-command
1762 ---------------------
1763
1764 Execute a Human Monitor command.
1765
1766 Arguments:
1767
1768 - command-line: the command name and its arguments, just like the
1769                 Human Monitor's shell (json-string)
1770 - cpu-index: select the CPU number to be used by commands which access CPU
1771              data, like 'info registers'. The Monitor selects CPU 0 if this
1772              argument is not provided (json-int, optional)
1773
1774 Example:
1775
1776 -> { "execute": "human-monitor-command", "arguments": { "command-line": "info kvm" } }
1777 <- { "return": "kvm support: enabled\r\n" }
1778
1779 Notes:
1780
1781 (1) The Human Monitor is NOT an stable interface, this means that command
1782     names, arguments and responses can change or be removed at ANY time.
1783     Applications that rely on long term stability guarantees should NOT
1784     use this command
1785
1786 (2) Limitations:
1787
1788     o This command is stateless, this means that commands that depend
1789       on state information (such as getfd) might not work
1790
1791     o Commands that prompt the user for data (eg. 'cont' when the block
1792       device is encrypted) don't currently work
1793
1794 3. Query Commands
1795 =================
1796
1797 HXCOMM Each query command below is inside a SQMP/EQMP section, do NOT change
1798 HXCOMM this! We will possibly move query commands definitions inside those
1799 HXCOMM sections, just like regular commands.
1800
1801 EQMP
1802
1803 SQMP
1804 query-version
1805 -------------
1806
1807 Show QEMU version.
1808
1809 Return a json-object with the following information:
1810
1811 - "qemu": A json-object containing three integer values:
1812     - "major": QEMU's major version (json-int)
1813     - "minor": QEMU's minor version (json-int)
1814     - "micro": QEMU's micro version (json-int)
1815 - "package": package's version (json-string)
1816
1817 Example:
1818
1819 -> { "execute": "query-version" }
1820 <- {
1821       "return":{
1822          "qemu":{
1823             "major":0,
1824             "minor":11,
1825             "micro":5
1826          },
1827          "package":""
1828       }
1829    }
1830
1831 EQMP
1832
1833     {
1834         .name       = "query-version",
1835         .args_type  = "",
1836         .mhandler.cmd_new = qmp_marshal_input_query_version,
1837     },
1838
1839 SQMP
1840 query-commands
1841 --------------
1842
1843 List QMP available commands.
1844
1845 Each command is represented by a json-object, the returned value is a json-array
1846 of all commands.
1847
1848 Each json-object contain:
1849
1850 - "name": command's name (json-string)
1851
1852 Example:
1853
1854 -> { "execute": "query-commands" }
1855 <- {
1856       "return":[
1857          {
1858             "name":"query-balloon"
1859          },
1860          {
1861             "name":"system_powerdown"
1862          }
1863       ]
1864    }
1865
1866 Note: This example has been shortened as the real response is too long.
1867
1868 EQMP
1869
1870     {
1871         .name       = "query-commands",
1872         .args_type  = "",
1873         .mhandler.cmd_new = qmp_marshal_input_query_commands,
1874     },
1875
1876 SQMP
1877 query-events
1878 --------------
1879
1880 List QMP available events.
1881
1882 Each event is represented by a json-object, the returned value is a json-array
1883 of all events.
1884
1885 Each json-object contains:
1886
1887 - "name": event's name (json-string)
1888
1889 Example:
1890
1891 -> { "execute": "query-events" }
1892 <- {
1893       "return":[
1894          {
1895             "name":"SHUTDOWN"
1896          },
1897          {
1898             "name":"RESET"
1899          }
1900       ]
1901    }
1902
1903 Note: This example has been shortened as the real response is too long.
1904
1905 EQMP
1906
1907     {
1908         .name       = "query-events",
1909         .args_type  = "",
1910         .mhandler.cmd_new = qmp_marshal_input_query_events,
1911     },
1912
1913 SQMP
1914 query-chardev
1915 -------------
1916
1917 Each device is represented by a json-object. The returned value is a json-array
1918 of all devices.
1919
1920 Each json-object contain the following:
1921
1922 - "label": device's label (json-string)
1923 - "filename": device's file (json-string)
1924
1925 Example:
1926
1927 -> { "execute": "query-chardev" }
1928 <- {
1929       "return":[
1930          {
1931             "label":"monitor",
1932             "filename":"stdio"
1933          },
1934          {
1935             "label":"serial0",
1936             "filename":"vc"
1937          }
1938       ]
1939    }
1940
1941 EQMP
1942
1943     {
1944         .name       = "query-chardev",
1945         .args_type  = "",
1946         .mhandler.cmd_new = qmp_marshal_input_query_chardev,
1947     },
1948
1949 SQMP
1950 query-chardev-backends
1951 -------------
1952
1953 List available character device backends.
1954
1955 Each backend is represented by a json-object, the returned value is a json-array
1956 of all backends.
1957
1958 Each json-object contains:
1959
1960 - "name": backend name (json-string)
1961
1962 Example:
1963
1964 -> { "execute": "query-chardev-backends" }
1965 <- {
1966       "return":[
1967          {
1968             "name":"udp"
1969          },
1970          {
1971             "name":"tcp"
1972          },
1973          {
1974             "name":"unix"
1975          },
1976          {
1977             "name":"spiceport"
1978          }
1979       ]
1980    }
1981
1982 EQMP
1983
1984     {
1985         .name       = "query-chardev-backends",
1986         .args_type  = "",
1987         .mhandler.cmd_new = qmp_marshal_input_query_chardev_backends,
1988     },
1989
1990 SQMP
1991 query-block
1992 -----------
1993
1994 Show the block devices.
1995
1996 Each block device information is stored in a json-object and the returned value
1997 is a json-array of all devices.
1998
1999 Each json-object contain the following:
2000
2001 - "device": device name (json-string)
2002 - "type": device type (json-string)
2003          - deprecated, retained for backward compatibility
2004          - Possible values: "unknown"
2005 - "removable": true if the device is removable, false otherwise (json-bool)
2006 - "locked": true if the device is locked, false otherwise (json-bool)
2007 - "tray_open": only present if removable, true if the device has a tray,
2008                and it is open (json-bool)
2009 - "inserted": only present if the device is inserted, it is a json-object
2010    containing the following:
2011          - "file": device file name (json-string)
2012          - "ro": true if read-only, false otherwise (json-bool)
2013          - "drv": driver format name (json-string)
2014              - Possible values: "blkdebug", "bochs", "cloop", "cow", "dmg",
2015                                 "file", "file", "ftp", "ftps", "host_cdrom",
2016                                 "host_device", "host_floppy", "http", "https",
2017                                 "nbd", "parallels", "qcow", "qcow2", "raw",
2018                                 "tftp", "vdi", "vmdk", "vpc", "vvfat"
2019          - "backing_file": backing file name (json-string, optional)
2020          - "backing_file_depth": number of files in the backing file chain (json-int)
2021          - "encrypted": true if encrypted, false otherwise (json-bool)
2022          - "bps": limit total bytes per second (json-int)
2023          - "bps_rd": limit read bytes per second (json-int)
2024          - "bps_wr": limit write bytes per second (json-int)
2025          - "iops": limit total I/O operations per second (json-int)
2026          - "iops_rd": limit read operations per second (json-int)
2027          - "iops_wr": limit write operations per second (json-int)
2028          - "bps_max":  total max in bytes (json-int)
2029          - "bps_rd_max":  read max in bytes (json-int)
2030          - "bps_wr_max":  write max in bytes (json-int)
2031          - "iops_max":  total I/O operations max (json-int)
2032          - "iops_rd_max":  read I/O operations max (json-int)
2033          - "iops_wr_max":  write I/O operations max (json-int)
2034          - "iops_size": I/O size when limiting by iops (json-int)
2035          - "image": the detail of the image, it is a json-object containing
2036             the following:
2037              - "filename": image file name (json-string)
2038              - "format": image format (json-string)
2039              - "virtual-size": image capacity in bytes (json-int)
2040              - "dirty-flag": true if image is not cleanly closed, not present
2041                              means clean (json-bool, optional)
2042              - "actual-size": actual size on disk in bytes of the image, not
2043                               present when image does not support thin
2044                               provision (json-int, optional)
2045              - "cluster-size": size of a cluster in bytes, not present if image
2046                                format does not support it (json-int, optional)
2047              - "encrypted": true if the image is encrypted, not present means
2048                             false or the image format does not support
2049                             encryption (json-bool, optional)
2050              - "backing_file": backing file name, not present means no backing
2051                                file is used or the image format does not
2052                                support backing file chain
2053                                (json-string, optional)
2054              - "full-backing-filename": full path of the backing file, not
2055                                         present if it equals backing_file or no
2056                                         backing file is used
2057                                         (json-string, optional)
2058              - "backing-filename-format": the format of the backing file, not
2059                                           present means unknown or no backing
2060                                           file (json-string, optional)
2061              - "snapshots": the internal snapshot info, it is an optional list
2062                 of json-object containing the following:
2063                  - "id": unique snapshot id (json-string)
2064                  - "name": snapshot name (json-string)
2065                  - "vm-state-size": size of the VM state in bytes (json-int)
2066                  - "date-sec": UTC date of the snapshot in seconds (json-int)
2067                  - "date-nsec": fractional part in nanoseconds to be used with
2068                                 date-sec (json-int)
2069                  - "vm-clock-sec": VM clock relative to boot in seconds
2070                                    (json-int)
2071                  - "vm-clock-nsec": fractional part in nanoseconds to be used
2072                                     with vm-clock-sec (json-int)
2073              - "backing-image": the detail of the backing image, it is an
2074                                 optional json-object only present when a
2075                                 backing image present for this image
2076
2077 - "io-status": I/O operation status, only present if the device supports it
2078                and the VM is configured to stop on errors. It's always reset
2079                to "ok" when the "cont" command is issued (json_string, optional)
2080              - Possible values: "ok", "failed", "nospace"
2081
2082 Example:
2083
2084 -> { "execute": "query-block" }
2085 <- {
2086       "return":[
2087          {
2088             "io-status": "ok",
2089             "device":"ide0-hd0",
2090             "locked":false,
2091             "removable":false,
2092             "inserted":{
2093                "ro":false,
2094                "drv":"qcow2",
2095                "encrypted":false,
2096                "file":"disks/test.qcow2",
2097                "backing_file_depth":1,
2098                "bps":1000000,
2099                "bps_rd":0,
2100                "bps_wr":0,
2101                "iops":1000000,
2102                "iops_rd":0,
2103                "iops_wr":0,
2104                "bps_max": 8000000,
2105                "bps_rd_max": 0,
2106                "bps_wr_max": 0,
2107                "iops_max": 0,
2108                "iops_rd_max": 0,
2109                "iops_wr_max": 0,
2110                "iops_size": 0,
2111                "image":{
2112                   "filename":"disks/test.qcow2",
2113                   "format":"qcow2",
2114                   "virtual-size":2048000,
2115                   "backing_file":"base.qcow2",
2116                   "full-backing-filename":"disks/base.qcow2",
2117                   "backing-filename-format:"qcow2",
2118                   "snapshots":[
2119                      {
2120                         "id": "1",
2121                         "name": "snapshot1",
2122                         "vm-state-size": 0,
2123                         "date-sec": 10000200,
2124                         "date-nsec": 12,
2125                         "vm-clock-sec": 206,
2126                         "vm-clock-nsec": 30
2127                      }
2128                   ],
2129                   "backing-image":{
2130                       "filename":"disks/base.qcow2",
2131                       "format":"qcow2",
2132                       "virtual-size":2048000
2133                   }
2134                }
2135             },
2136             "type":"unknown"
2137          },
2138          {
2139             "io-status": "ok",
2140             "device":"ide1-cd0",
2141             "locked":false,
2142             "removable":true,
2143             "type":"unknown"
2144          },
2145          {
2146             "device":"floppy0",
2147             "locked":false,
2148             "removable":true,
2149             "type":"unknown"
2150          },
2151          {
2152             "device":"sd0",
2153             "locked":false,
2154             "removable":true,
2155             "type":"unknown"
2156          }
2157       ]
2158    }
2159
2160 EQMP
2161
2162     {
2163         .name       = "query-block",
2164         .args_type  = "",
2165         .mhandler.cmd_new = qmp_marshal_input_query_block,
2166     },
2167
2168 SQMP
2169 query-blockstats
2170 ----------------
2171
2172 Show block device statistics.
2173
2174 Each device statistic information is stored in a json-object and the returned
2175 value is a json-array of all devices.
2176
2177 Each json-object contain the following:
2178
2179 - "device": device name (json-string)
2180 - "stats": A json-object with the statistics information, it contains:
2181     - "rd_bytes": bytes read (json-int)
2182     - "wr_bytes": bytes written (json-int)
2183     - "rd_operations": read operations (json-int)
2184     - "wr_operations": write operations (json-int)
2185     - "flush_operations": cache flush operations (json-int)
2186     - "wr_total_time_ns": total time spend on writes in nano-seconds (json-int)
2187     - "rd_total_time_ns": total time spend on reads in nano-seconds (json-int)
2188     - "flush_total_time_ns": total time spend on cache flushes in nano-seconds (json-int)
2189     - "wr_highest_offset": Highest offset of a sector written since the
2190                            BlockDriverState has been opened (json-int)
2191 - "parent": Contains recursively the statistics of the underlying
2192             protocol (e.g. the host file for a qcow2 image). If there is
2193             no underlying protocol, this field is omitted
2194             (json-object, optional)
2195
2196 Example:
2197
2198 -> { "execute": "query-blockstats" }
2199 <- {
2200       "return":[
2201          {
2202             "device":"ide0-hd0",
2203             "parent":{
2204                "stats":{
2205                   "wr_highest_offset":3686448128,
2206                   "wr_bytes":9786368,
2207                   "wr_operations":751,
2208                   "rd_bytes":122567168,
2209                   "rd_operations":36772
2210                   "wr_total_times_ns":313253456
2211                   "rd_total_times_ns":3465673657
2212                   "flush_total_times_ns":49653
2213                   "flush_operations":61,
2214                }
2215             },
2216             "stats":{
2217                "wr_highest_offset":2821110784,
2218                "wr_bytes":9786368,
2219                "wr_operations":692,
2220                "rd_bytes":122739200,
2221                "rd_operations":36604
2222                "flush_operations":51,
2223                "wr_total_times_ns":313253456
2224                "rd_total_times_ns":3465673657
2225                "flush_total_times_ns":49653
2226             }
2227          },
2228          {
2229             "device":"ide1-cd0",
2230             "stats":{
2231                "wr_highest_offset":0,
2232                "wr_bytes":0,
2233                "wr_operations":0,
2234                "rd_bytes":0,
2235                "rd_operations":0
2236                "flush_operations":0,
2237                "wr_total_times_ns":0
2238                "rd_total_times_ns":0
2239                "flush_total_times_ns":0
2240             }
2241          },
2242          {
2243             "device":"floppy0",
2244             "stats":{
2245                "wr_highest_offset":0,
2246                "wr_bytes":0,
2247                "wr_operations":0,
2248                "rd_bytes":0,
2249                "rd_operations":0
2250                "flush_operations":0,
2251                "wr_total_times_ns":0
2252                "rd_total_times_ns":0
2253                "flush_total_times_ns":0
2254             }
2255          },
2256          {
2257             "device":"sd0",
2258             "stats":{
2259                "wr_highest_offset":0,
2260                "wr_bytes":0,
2261                "wr_operations":0,
2262                "rd_bytes":0,
2263                "rd_operations":0
2264                "flush_operations":0,
2265                "wr_total_times_ns":0
2266                "rd_total_times_ns":0
2267                "flush_total_times_ns":0
2268             }
2269          }
2270       ]
2271    }
2272
2273 EQMP
2274
2275     {
2276         .name       = "query-blockstats",
2277         .args_type  = "",
2278         .mhandler.cmd_new = qmp_marshal_input_query_blockstats,
2279     },
2280
2281 SQMP
2282 query-cpus
2283 ----------
2284
2285 Show CPU information.
2286
2287 Return a json-array. Each CPU is represented by a json-object, which contains:
2288
2289 - "CPU": CPU index (json-int)
2290 - "current": true if this is the current CPU, false otherwise (json-bool)
2291 - "halted": true if the cpu is halted, false otherwise (json-bool)
2292 - Current program counter. The key's name depends on the architecture:
2293      "pc": i386/x86_64 (json-int)
2294      "nip": PPC (json-int)
2295      "pc" and "npc": sparc (json-int)
2296      "PC": mips (json-int)
2297 - "thread_id": ID of the underlying host thread (json-int)
2298
2299 Example:
2300
2301 -> { "execute": "query-cpus" }
2302 <- {
2303       "return":[
2304          {
2305             "CPU":0,
2306             "current":true,
2307             "halted":false,
2308             "pc":3227107138
2309             "thread_id":3134
2310          },
2311          {
2312             "CPU":1,
2313             "current":false,
2314             "halted":true,
2315             "pc":7108165
2316             "thread_id":3135
2317          }
2318       ]
2319    }
2320
2321 EQMP
2322
2323     {
2324         .name       = "query-cpus",
2325         .args_type  = "",
2326         .mhandler.cmd_new = qmp_marshal_input_query_cpus,
2327     },
2328
2329 SQMP
2330 query-iothreads
2331 ---------------
2332
2333 Returns a list of information about each iothread.
2334
2335 Note this list excludes the QEMU main loop thread, which is not declared
2336 using the -object iothread command-line option.  It is always the main thread
2337 of the process.
2338
2339 Return a json-array. Each iothread is represented by a json-object, which contains:
2340
2341 - "id": name of iothread (json-str)
2342 - "thread-id": ID of the underlying host thread (json-int)
2343
2344 Example:
2345
2346 -> { "execute": "query-iothreads" }
2347 <- {
2348       "return":[
2349          {
2350             "id":"iothread0",
2351             "thread-id":3134
2352          },
2353          {
2354             "id":"iothread1",
2355             "thread-id":3135
2356          }
2357       ]
2358    }
2359
2360 EQMP
2361
2362     {
2363         .name       = "query-iothreads",
2364         .args_type  = "",
2365         .mhandler.cmd_new = qmp_marshal_input_query_iothreads,
2366     },
2367
2368 SQMP
2369 query-pci
2370 ---------
2371
2372 PCI buses and devices information.
2373
2374 The returned value is a json-array of all buses. Each bus is represented by
2375 a json-object, which has a key with a json-array of all PCI devices attached
2376 to it. Each device is represented by a json-object.
2377
2378 The bus json-object contains the following:
2379
2380 - "bus": bus number (json-int)
2381 - "devices": a json-array of json-objects, each json-object represents a
2382              PCI device
2383
2384 The PCI device json-object contains the following:
2385
2386 - "bus": identical to the parent's bus number (json-int)
2387 - "slot": slot number (json-int)
2388 - "function": function number (json-int)
2389 - "class_info": a json-object containing:
2390      - "desc": device class description (json-string, optional)
2391      - "class": device class number (json-int)
2392 - "id": a json-object containing:
2393      - "device": device ID (json-int)
2394      - "vendor": vendor ID (json-int)
2395 - "irq": device's IRQ if assigned (json-int, optional)
2396 - "qdev_id": qdev id string (json-string)
2397 - "pci_bridge": It's a json-object, only present if this device is a
2398                 PCI bridge, contains:
2399      - "bus": bus number (json-int)
2400      - "secondary": secondary bus number (json-int)
2401      - "subordinate": subordinate bus number (json-int)
2402      - "io_range": I/O memory range information, a json-object with the
2403                    following members:
2404                  - "base": base address, in bytes (json-int)
2405                  - "limit": limit address, in bytes (json-int)
2406      - "memory_range": memory range information, a json-object with the
2407                        following members:
2408                  - "base": base address, in bytes (json-int)
2409                  - "limit": limit address, in bytes (json-int)
2410      - "prefetchable_range": Prefetchable memory range information, a
2411                              json-object with the following members:
2412                  - "base": base address, in bytes (json-int)
2413                  - "limit": limit address, in bytes (json-int)
2414      - "devices": a json-array of PCI devices if there's any attached, each
2415                   each element is represented by a json-object, which contains
2416                   the same members of the 'PCI device json-object' described
2417                   above (optional)
2418 - "regions": a json-array of json-objects, each json-object represents a
2419              memory region of this device
2420
2421 The memory range json-object contains the following:
2422
2423 - "base": base memory address (json-int)
2424 - "limit": limit value (json-int)
2425
2426 The region json-object can be an I/O region or a memory region, an I/O region
2427 json-object contains the following:
2428
2429 - "type": "io" (json-string, fixed)
2430 - "bar": BAR number (json-int)
2431 - "address": memory address (json-int)
2432 - "size": memory size (json-int)
2433
2434 A memory region json-object contains the following:
2435
2436 - "type": "memory" (json-string, fixed)
2437 - "bar": BAR number (json-int)
2438 - "address": memory address (json-int)
2439 - "size": memory size (json-int)
2440 - "mem_type_64": true or false (json-bool)
2441 - "prefetch": true or false (json-bool)
2442
2443 Example:
2444
2445 -> { "execute": "query-pci" }
2446 <- {
2447       "return":[
2448          {
2449             "bus":0,
2450             "devices":[
2451                {
2452                   "bus":0,
2453                   "qdev_id":"",
2454                   "slot":0,
2455                   "class_info":{
2456                      "class":1536,
2457                      "desc":"Host bridge"
2458                   },
2459                   "id":{
2460                      "device":32902,
2461                      "vendor":4663
2462                   },
2463                   "function":0,
2464                   "regions":[
2465
2466                   ]
2467                },
2468                {
2469                   "bus":0,
2470                   "qdev_id":"",
2471                   "slot":1,
2472                   "class_info":{
2473                      "class":1537,
2474                      "desc":"ISA bridge"
2475                   },
2476                   "id":{
2477                      "device":32902,
2478                      "vendor":28672
2479                   },
2480                   "function":0,
2481                   "regions":[
2482
2483                   ]
2484                },
2485                {
2486                   "bus":0,
2487                   "qdev_id":"",
2488                   "slot":1,
2489                   "class_info":{
2490                      "class":257,
2491                      "desc":"IDE controller"
2492                   },
2493                   "id":{
2494                      "device":32902,
2495                      "vendor":28688
2496                   },
2497                   "function":1,
2498                   "regions":[
2499                      {
2500                         "bar":4,
2501                         "size":16,
2502                         "address":49152,
2503                         "type":"io"
2504                      }
2505                   ]
2506                },
2507                {
2508                   "bus":0,
2509                   "qdev_id":"",
2510                   "slot":2,
2511                   "class_info":{
2512                      "class":768,
2513                      "desc":"VGA controller"
2514                   },
2515                   "id":{
2516                      "device":4115,
2517                      "vendor":184
2518                   },
2519                   "function":0,
2520                   "regions":[
2521                      {
2522                         "prefetch":true,
2523                         "mem_type_64":false,
2524                         "bar":0,
2525                         "size":33554432,
2526                         "address":4026531840,
2527                         "type":"memory"
2528                      },
2529                      {
2530                         "prefetch":false,
2531                         "mem_type_64":false,
2532                         "bar":1,
2533                         "size":4096,
2534                         "address":4060086272,
2535                         "type":"memory"
2536                      },
2537                      {
2538                         "prefetch":false,
2539                         "mem_type_64":false,
2540                         "bar":6,
2541                         "size":65536,
2542                         "address":-1,
2543                         "type":"memory"
2544                      }
2545                   ]
2546                },
2547                {
2548                   "bus":0,
2549                   "qdev_id":"",
2550                   "irq":11,
2551                   "slot":4,
2552                   "class_info":{
2553                      "class":1280,
2554                      "desc":"RAM controller"
2555                   },
2556                   "id":{
2557                      "device":6900,
2558                      "vendor":4098
2559                   },
2560                   "function":0,
2561                   "regions":[
2562                      {
2563                         "bar":0,
2564                         "size":32,
2565                         "address":49280,
2566                         "type":"io"
2567                      }
2568                   ]
2569                }
2570             ]
2571          }
2572       ]
2573    }
2574
2575 Note: This example has been shortened as the real response is too long.
2576
2577 EQMP
2578
2579     {
2580         .name       = "query-pci",
2581         .args_type  = "",
2582         .mhandler.cmd_new = qmp_marshal_input_query_pci,
2583     },
2584
2585 SQMP
2586 query-kvm
2587 ---------
2588
2589 Show KVM information.
2590
2591 Return a json-object with the following information:
2592
2593 - "enabled": true if KVM support is enabled, false otherwise (json-bool)
2594 - "present": true if QEMU has KVM support, false otherwise (json-bool)
2595
2596 Example:
2597
2598 -> { "execute": "query-kvm" }
2599 <- { "return": { "enabled": true, "present": true } }
2600
2601 EQMP
2602
2603     {
2604         .name       = "query-kvm",
2605         .args_type  = "",
2606         .mhandler.cmd_new = qmp_marshal_input_query_kvm,
2607     },
2608
2609 SQMP
2610 query-status
2611 ------------
2612
2613 Return a json-object with the following information:
2614
2615 - "running": true if the VM is running, or false if it is paused (json-bool)
2616 - "singlestep": true if the VM is in single step mode,
2617                 false otherwise (json-bool)
2618 - "status": one of the following values (json-string)
2619     "debug" - QEMU is running on a debugger
2620     "inmigrate" - guest is paused waiting for an incoming migration
2621     "internal-error" - An internal error that prevents further guest
2622     execution has occurred
2623     "io-error" - the last IOP has failed and the device is configured
2624     to pause on I/O errors
2625     "paused" - guest has been paused via the 'stop' command
2626     "postmigrate" - guest is paused following a successful 'migrate'
2627     "prelaunch" - QEMU was started with -S and guest has not started
2628     "finish-migrate" - guest is paused to finish the migration process
2629     "restore-vm" - guest is paused to restore VM state
2630     "running" - guest is actively running
2631     "save-vm" - guest is paused to save the VM state
2632     "shutdown" - guest is shut down (and -no-shutdown is in use)
2633     "watchdog" - the watchdog action is configured to pause and
2634      has been triggered
2635
2636 Example:
2637
2638 -> { "execute": "query-status" }
2639 <- { "return": { "running": true, "singlestep": false, "status": "running" } }
2640
2641 EQMP
2642
2643     {
2644         .name       = "query-status",
2645         .args_type  = "",
2646         .mhandler.cmd_new = qmp_marshal_input_query_status,
2647     },
2648
2649 SQMP
2650 query-mice
2651 ----------
2652
2653 Show VM mice information.
2654
2655 Each mouse is represented by a json-object, the returned value is a json-array
2656 of all mice.
2657
2658 The mouse json-object contains the following:
2659
2660 - "name": mouse's name (json-string)
2661 - "index": mouse's index (json-int)
2662 - "current": true if this mouse is receiving events, false otherwise (json-bool)
2663 - "absolute": true if the mouse generates absolute input events (json-bool)
2664
2665 Example:
2666
2667 -> { "execute": "query-mice" }
2668 <- {
2669       "return":[
2670          {
2671             "name":"QEMU Microsoft Mouse",
2672             "index":0,
2673             "current":false,
2674             "absolute":false
2675          },
2676          {
2677             "name":"QEMU PS/2 Mouse",
2678             "index":1,
2679             "current":true,
2680             "absolute":true
2681          }
2682       ]
2683    }
2684
2685 EQMP
2686
2687     {
2688         .name       = "query-mice",
2689         .args_type  = "",
2690         .mhandler.cmd_new = qmp_marshal_input_query_mice,
2691     },
2692
2693 SQMP
2694 query-vnc
2695 ---------
2696
2697 Show VNC server information.
2698
2699 Return a json-object with server information. Connected clients are returned
2700 as a json-array of json-objects.
2701
2702 The main json-object contains the following:
2703
2704 - "enabled": true or false (json-bool)
2705 - "host": server's IP address (json-string)
2706 - "family": address family (json-string)
2707          - Possible values: "ipv4", "ipv6", "unix", "unknown"
2708 - "service": server's port number (json-string)
2709 - "auth": authentication method (json-string)
2710          - Possible values: "invalid", "none", "ra2", "ra2ne", "sasl", "tight",
2711                             "tls", "ultra", "unknown", "vencrypt", "vencrypt",
2712                             "vencrypt+plain", "vencrypt+tls+none",
2713                             "vencrypt+tls+plain", "vencrypt+tls+sasl",
2714                             "vencrypt+tls+vnc", "vencrypt+x509+none",
2715                             "vencrypt+x509+plain", "vencrypt+x509+sasl",
2716                             "vencrypt+x509+vnc", "vnc"
2717 - "clients": a json-array of all connected clients
2718
2719 Clients are described by a json-object, each one contain the following:
2720
2721 - "host": client's IP address (json-string)
2722 - "family": address family (json-string)
2723          - Possible values: "ipv4", "ipv6", "unix", "unknown"
2724 - "service": client's port number (json-string)
2725 - "x509_dname": TLS dname (json-string, optional)
2726 - "sasl_username": SASL username (json-string, optional)
2727
2728 Example:
2729
2730 -> { "execute": "query-vnc" }
2731 <- {
2732       "return":{
2733          "enabled":true,
2734          "host":"0.0.0.0",
2735          "service":"50402",
2736          "auth":"vnc",
2737          "family":"ipv4",
2738          "clients":[
2739             {
2740                "host":"127.0.0.1",
2741                "service":"50401",
2742                "family":"ipv4"
2743             }
2744          ]
2745       }
2746    }
2747
2748 EQMP
2749
2750     {
2751         .name       = "query-vnc",
2752         .args_type  = "",
2753         .mhandler.cmd_new = qmp_marshal_input_query_vnc,
2754     },
2755
2756 SQMP
2757 query-spice
2758 -----------
2759
2760 Show SPICE server information.
2761
2762 Return a json-object with server information. Connected clients are returned
2763 as a json-array of json-objects.
2764
2765 The main json-object contains the following:
2766
2767 - "enabled": true or false (json-bool)
2768 - "host": server's IP address (json-string)
2769 - "port": server's port number (json-int, optional)
2770 - "tls-port": server's port number (json-int, optional)
2771 - "auth": authentication method (json-string)
2772          - Possible values: "none", "spice"
2773 - "channels": a json-array of all active channels clients
2774
2775 Channels are described by a json-object, each one contain the following:
2776
2777 - "host": client's IP address (json-string)
2778 - "family": address family (json-string)
2779          - Possible values: "ipv4", "ipv6", "unix", "unknown"
2780 - "port": client's port number (json-string)
2781 - "connection-id": spice connection id.  All channels with the same id
2782                    belong to the same spice session (json-int)
2783 - "channel-type": channel type.  "1" is the main control channel, filter for
2784                   this one if you want track spice sessions only (json-int)
2785 - "channel-id": channel id.  Usually "0", might be different needed when
2786                 multiple channels of the same type exist, such as multiple
2787                 display channels in a multihead setup (json-int)
2788 - "tls": whevener the channel is encrypted (json-bool)
2789
2790 Example:
2791
2792 -> { "execute": "query-spice" }
2793 <- {
2794       "return": {
2795          "enabled": true,
2796          "auth": "spice",
2797          "port": 5920,
2798          "tls-port": 5921,
2799          "host": "0.0.0.0",
2800          "channels": [
2801             {
2802                "port": "54924",
2803                "family": "ipv4",
2804                "channel-type": 1,
2805                "connection-id": 1804289383,
2806                "host": "127.0.0.1",
2807                "channel-id": 0,
2808                "tls": true
2809             },
2810             {
2811                "port": "36710",
2812                "family": "ipv4",
2813                "channel-type": 4,
2814                "connection-id": 1804289383,
2815                "host": "127.0.0.1",
2816                "channel-id": 0,
2817                "tls": false
2818             },
2819             [ ... more channels follow ... ]
2820          ]
2821       }
2822    }
2823
2824 EQMP
2825
2826 #if defined(CONFIG_SPICE)
2827     {
2828         .name       = "query-spice",
2829         .args_type  = "",
2830         .mhandler.cmd_new = qmp_marshal_input_query_spice,
2831     },
2832 #endif
2833
2834 SQMP
2835 query-name
2836 ----------
2837
2838 Show VM name.
2839
2840 Return a json-object with the following information:
2841
2842 - "name": VM's name (json-string, optional)
2843
2844 Example:
2845
2846 -> { "execute": "query-name" }
2847 <- { "return": { "name": "qemu-name" } }
2848
2849 EQMP
2850
2851     {
2852         .name       = "query-name",
2853         .args_type  = "",
2854         .mhandler.cmd_new = qmp_marshal_input_query_name,
2855     },
2856
2857 SQMP
2858 query-uuid
2859 ----------
2860
2861 Show VM UUID.
2862
2863 Return a json-object with the following information:
2864
2865 - "UUID": Universally Unique Identifier (json-string)
2866
2867 Example:
2868
2869 -> { "execute": "query-uuid" }
2870 <- { "return": { "UUID": "550e8400-e29b-41d4-a716-446655440000" } }
2871
2872 EQMP
2873
2874     {
2875         .name       = "query-uuid",
2876         .args_type  = "",
2877         .mhandler.cmd_new = qmp_marshal_input_query_uuid,
2878     },
2879
2880 SQMP
2881 query-command-line-options
2882 --------------------------
2883
2884 Show command line option schema.
2885
2886 Return a json-array of command line option schema for all options (or for
2887 the given option), returning an error if the given option doesn't exist.
2888
2889 Each array entry contains the following:
2890
2891 - "option": option name (json-string)
2892 - "parameters": a json-array describes all parameters of the option:
2893     - "name": parameter name (json-string)
2894     - "type": parameter type (one of 'string', 'boolean', 'number',
2895               or 'size')
2896     - "help": human readable description of the parameter
2897               (json-string, optional)
2898
2899 Example:
2900
2901 -> { "execute": "query-command-line-options", "arguments": { "option": "option-rom" } }
2902 <- { "return": [
2903         {
2904             "parameters": [
2905                 {
2906                     "name": "romfile",
2907                     "type": "string"
2908                 },
2909                 {
2910                     "name": "bootindex",
2911                     "type": "number"
2912                 }
2913             ],
2914             "option": "option-rom"
2915         }
2916      ]
2917    }
2918
2919 EQMP
2920
2921     {
2922         .name       = "query-command-line-options",
2923         .args_type  = "option:s?",
2924         .mhandler.cmd_new = qmp_marshal_input_query_command_line_options,
2925     },
2926
2927 SQMP
2928 query-migrate
2929 -------------
2930
2931 Migration status.
2932
2933 Return a json-object. If migration is active there will be another json-object
2934 with RAM migration status and if block migration is active another one with
2935 block migration status.
2936
2937 The main json-object contains the following:
2938
2939 - "status": migration status (json-string)
2940      - Possible values: "active", "completed", "failed", "cancelled"
2941 - "total-time": total amount of ms since migration started.  If
2942                 migration has ended, it returns the total migration
2943                 time (json-int)
2944 - "setup-time" amount of setup time in milliseconds _before_ the
2945                iterations begin but _after_ the QMP command is issued.
2946                This is designed to provide an accounting of any activities
2947                (such as RDMA pinning) which may be expensive, but do not
2948                actually occur during the iterative migration rounds
2949                themselves. (json-int)
2950 - "downtime": only present when migration has finished correctly
2951               total amount in ms for downtime that happened (json-int)
2952 - "expected-downtime": only present while migration is active
2953                 total amount in ms for downtime that was calculated on
2954                 the last bitmap round (json-int)
2955 - "ram": only present if "status" is "active", it is a json-object with the
2956   following RAM information:
2957          - "transferred": amount transferred in bytes (json-int)
2958          - "remaining": amount remaining to transfer in bytes (json-int)
2959          - "total": total amount of memory in bytes (json-int)
2960          - "duplicate": number of pages filled entirely with the same
2961             byte (json-int)
2962             These are sent over the wire much more efficiently.
2963          - "skipped": number of skipped zero pages (json-int)
2964          - "normal" : number of whole pages transferred.  I.e. they
2965             were not sent as duplicate or xbzrle pages (json-int)
2966          - "normal-bytes" : number of bytes transferred in whole
2967             pages. This is just normal pages times size of one page,
2968             but this way upper levels don't need to care about page
2969             size (json-int)
2970          - "dirty-sync-count": times that dirty ram was synchronized (json-int)
2971 - "disk": only present if "status" is "active" and it is a block migration,
2972   it is a json-object with the following disk information:
2973          - "transferred": amount transferred in bytes (json-int)
2974          - "remaining": amount remaining to transfer in bytes json-int)
2975          - "total": total disk size in bytes (json-int)
2976 - "xbzrle-cache": only present if XBZRLE is active.
2977   It is a json-object with the following XBZRLE information:
2978          - "cache-size": XBZRLE cache size in bytes
2979          - "bytes": number of bytes transferred for XBZRLE compressed pages
2980          - "pages": number of XBZRLE compressed pages
2981          - "cache-miss": number of XBRZRLE page cache misses
2982          - "cache-miss-rate": rate of XBRZRLE page cache misses
2983          - "overflow": number of times XBZRLE overflows.  This means
2984            that the XBZRLE encoding was bigger than just sent the
2985            whole page, and then we sent the whole page instead (as as
2986            normal page).
2987
2988 Examples:
2989
2990 1. Before the first migration
2991
2992 -> { "execute": "query-migrate" }
2993 <- { "return": {} }
2994
2995 2. Migration is done and has succeeded
2996
2997 -> { "execute": "query-migrate" }
2998 <- { "return": {
2999         "status": "completed",
3000         "ram":{
3001           "transferred":123,
3002           "remaining":123,
3003           "total":246,
3004           "total-time":12345,
3005           "setup-time":12345,
3006           "downtime":12345,
3007           "duplicate":123,
3008           "normal":123,
3009           "normal-bytes":123456,
3010           "dirty-sync-count":15
3011         }
3012      }
3013    }
3014
3015 3. Migration is done and has failed
3016
3017 -> { "execute": "query-migrate" }
3018 <- { "return": { "status": "failed" } }
3019
3020 4. Migration is being performed and is not a block migration:
3021
3022 -> { "execute": "query-migrate" }
3023 <- {
3024       "return":{
3025          "status":"active",
3026          "ram":{
3027             "transferred":123,
3028             "remaining":123,
3029             "total":246,
3030             "total-time":12345,
3031             "setup-time":12345,
3032             "expected-downtime":12345,
3033             "duplicate":123,
3034             "normal":123,
3035             "normal-bytes":123456,
3036             "dirty-sync-count":15
3037          }
3038       }
3039    }
3040
3041 5. Migration is being performed and is a block migration:
3042
3043 -> { "execute": "query-migrate" }
3044 <- {
3045       "return":{
3046          "status":"active",
3047          "ram":{
3048             "total":1057024,
3049             "remaining":1053304,
3050             "transferred":3720,
3051             "total-time":12345,
3052             "setup-time":12345,
3053             "expected-downtime":12345,
3054             "duplicate":123,
3055             "normal":123,
3056             "normal-bytes":123456,
3057             "dirty-sync-count":15
3058          },
3059          "disk":{
3060             "total":20971520,
3061             "remaining":20880384,
3062             "transferred":91136
3063          }
3064       }
3065    }
3066
3067 6. Migration is being performed and XBZRLE is active:
3068
3069 -> { "execute": "query-migrate" }
3070 <- {
3071       "return":{
3072          "status":"active",
3073          "capabilities" : [ { "capability": "xbzrle", "state" : true } ],
3074          "ram":{
3075             "total":1057024,
3076             "remaining":1053304,
3077             "transferred":3720,
3078             "total-time":12345,
3079             "setup-time":12345,
3080             "expected-downtime":12345,
3081             "duplicate":10,
3082             "normal":3333,
3083             "normal-bytes":3412992,
3084             "dirty-sync-count":15
3085          },
3086          "xbzrle-cache":{
3087             "cache-size":67108864,
3088             "bytes":20971520,
3089             "pages":2444343,
3090             "cache-miss":2244,
3091             "cache-miss-rate":0.123,
3092             "overflow":34434
3093          }
3094       }
3095    }
3096
3097 EQMP
3098
3099     {
3100         .name       = "query-migrate",
3101         .args_type  = "",
3102         .mhandler.cmd_new = qmp_marshal_input_query_migrate,
3103     },
3104
3105 SQMP
3106 migrate-set-capabilities
3107 ------------------------
3108
3109 Enable/Disable migration capabilities
3110
3111 - "xbzrle": XBZRLE support
3112
3113 Arguments:
3114
3115 Example:
3116
3117 -> { "execute": "migrate-set-capabilities" , "arguments":
3118      { "capabilities": [ { "capability": "xbzrle", "state": true } ] } }
3119
3120 EQMP
3121
3122     {
3123         .name       = "migrate-set-capabilities",
3124         .args_type  = "capabilities:O",
3125         .params     = "capability:s,state:b",
3126         .mhandler.cmd_new = qmp_marshal_input_migrate_set_capabilities,
3127     },
3128 SQMP
3129 query-migrate-capabilities
3130 --------------------------
3131
3132 Query current migration capabilities
3133
3134 - "capabilities": migration capabilities state
3135          - "xbzrle" : XBZRLE state (json-bool)
3136
3137 Arguments:
3138
3139 Example:
3140
3141 -> { "execute": "query-migrate-capabilities" }
3142 <- { "return": [ { "state": false, "capability": "xbzrle" } ] }
3143
3144 EQMP
3145
3146     {
3147         .name       = "query-migrate-capabilities",
3148         .args_type  = "",
3149         .mhandler.cmd_new = qmp_marshal_input_query_migrate_capabilities,
3150     },
3151
3152 SQMP
3153 query-balloon
3154 -------------
3155
3156 Show balloon information.
3157
3158 Make an asynchronous request for balloon info. When the request completes a
3159 json-object will be returned containing the following data:
3160
3161 - "actual": current balloon value in bytes (json-int)
3162
3163 Example:
3164
3165 -> { "execute": "query-balloon" }
3166 <- {
3167       "return":{
3168          "actual":1073741824,
3169       }
3170    }
3171
3172 EQMP
3173
3174     {
3175         .name       = "query-balloon",
3176         .args_type  = "",
3177         .mhandler.cmd_new = qmp_marshal_input_query_balloon,
3178     },
3179
3180     {
3181         .name       = "query-block-jobs",
3182         .args_type  = "",
3183         .mhandler.cmd_new = qmp_marshal_input_query_block_jobs,
3184     },
3185
3186     {
3187         .name       = "qom-list",
3188         .args_type  = "path:s",
3189         .mhandler.cmd_new = qmp_marshal_input_qom_list,
3190     },
3191
3192     {
3193         .name       = "qom-set",
3194         .args_type  = "path:s,property:s,value:q",
3195         .mhandler.cmd_new = qmp_qom_set,
3196     },
3197
3198     {
3199         .name       = "qom-get",
3200         .args_type  = "path:s,property:s",
3201         .mhandler.cmd_new = qmp_qom_get,
3202     },
3203
3204     {
3205         .name       = "nbd-server-start",
3206         .args_type  = "addr:q",
3207         .mhandler.cmd_new = qmp_marshal_input_nbd_server_start,
3208     },
3209     {
3210         .name       = "nbd-server-add",
3211         .args_type  = "device:B,writable:b?",
3212         .mhandler.cmd_new = qmp_marshal_input_nbd_server_add,
3213     },
3214     {
3215         .name       = "nbd-server-stop",
3216         .args_type  = "",
3217         .mhandler.cmd_new = qmp_marshal_input_nbd_server_stop,
3218     },
3219
3220     {
3221         .name       = "change-vnc-password",
3222         .args_type  = "password:s",
3223         .mhandler.cmd_new = qmp_marshal_input_change_vnc_password,
3224     },
3225     {
3226         .name       = "qom-list-types",
3227         .args_type  = "implements:s?,abstract:b?",
3228         .mhandler.cmd_new = qmp_marshal_input_qom_list_types,
3229     },
3230
3231     {
3232         .name       = "device-list-properties",
3233         .args_type  = "typename:s",
3234         .mhandler.cmd_new = qmp_marshal_input_device_list_properties,
3235     },
3236
3237     {
3238         .name       = "query-machines",
3239         .args_type  = "",
3240         .mhandler.cmd_new = qmp_marshal_input_query_machines,
3241     },
3242
3243     {
3244         .name       = "query-cpu-definitions",
3245         .args_type  = "",
3246         .mhandler.cmd_new = qmp_marshal_input_query_cpu_definitions,
3247     },
3248
3249     {
3250         .name       = "query-target",
3251         .args_type  = "",
3252         .mhandler.cmd_new = qmp_marshal_input_query_target,
3253     },
3254
3255     {
3256         .name       = "query-tpm",
3257         .args_type  = "",
3258         .mhandler.cmd_new = qmp_marshal_input_query_tpm,
3259     },
3260
3261 SQMP
3262 query-tpm
3263 ---------
3264
3265 Return information about the TPM device.
3266
3267 Arguments: None
3268
3269 Example:
3270
3271 -> { "execute": "query-tpm" }
3272 <- { "return":
3273      [
3274        { "model": "tpm-tis",
3275          "options":
3276            { "type": "passthrough",
3277              "data":
3278                { "cancel-path": "/sys/class/misc/tpm0/device/cancel",
3279                  "path": "/dev/tpm0"
3280                }
3281            },
3282          "id": "tpm0"
3283        }
3284      ]
3285    }
3286
3287 EQMP
3288
3289     {
3290         .name       = "query-tpm-models",
3291         .args_type  = "",
3292         .mhandler.cmd_new = qmp_marshal_input_query_tpm_models,
3293     },
3294
3295 SQMP
3296 query-tpm-models
3297 ----------------
3298
3299 Return a list of supported TPM models.
3300
3301 Arguments: None
3302
3303 Example:
3304
3305 -> { "execute": "query-tpm-models" }
3306 <- { "return": [ "tpm-tis" ] }
3307
3308 EQMP
3309
3310     {
3311         .name       = "query-tpm-types",
3312         .args_type  = "",
3313         .mhandler.cmd_new = qmp_marshal_input_query_tpm_types,
3314     },
3315
3316 SQMP
3317 query-tpm-types
3318 ---------------
3319
3320 Return a list of supported TPM types.
3321
3322 Arguments: None
3323
3324 Example:
3325
3326 -> { "execute": "query-tpm-types" }
3327 <- { "return": [ "passthrough" ] }
3328
3329 EQMP
3330
3331     {
3332         .name       = "chardev-add",
3333         .args_type  = "id:s,backend:q",
3334         .mhandler.cmd_new = qmp_marshal_input_chardev_add,
3335     },
3336
3337 SQMP
3338 chardev-add
3339 ----------------
3340
3341 Add a chardev.
3342
3343 Arguments:
3344
3345 - "id": the chardev's ID, must be unique (json-string)
3346 - "backend": chardev backend type + parameters
3347
3348 Examples:
3349
3350 -> { "execute" : "chardev-add",
3351      "arguments" : { "id" : "foo",
3352                      "backend" : { "type" : "null", "data" : {} } } }
3353 <- { "return": {} }
3354
3355 -> { "execute" : "chardev-add",
3356      "arguments" : { "id" : "bar",
3357                      "backend" : { "type" : "file",
3358                                    "data" : { "out" : "/tmp/bar.log" } } } }
3359 <- { "return": {} }
3360
3361 -> { "execute" : "chardev-add",
3362      "arguments" : { "id" : "baz",
3363                      "backend" : { "type" : "pty", "data" : {} } } }
3364 <- { "return": { "pty" : "/dev/pty/42" } }
3365
3366 EQMP
3367
3368     {
3369         .name       = "chardev-remove",
3370         .args_type  = "id:s",
3371         .mhandler.cmd_new = qmp_marshal_input_chardev_remove,
3372     },
3373
3374
3375 SQMP
3376 chardev-remove
3377 --------------
3378
3379 Remove a chardev.
3380
3381 Arguments:
3382
3383 - "id": the chardev's ID, must exist and not be in use (json-string)
3384
3385 Example:
3386
3387 -> { "execute": "chardev-remove", "arguments": { "id" : "foo" } }
3388 <- { "return": {} }
3389
3390 EQMP
3391     {
3392         .name       = "query-rx-filter",
3393         .args_type  = "name:s?",
3394         .mhandler.cmd_new = qmp_marshal_input_query_rx_filter,
3395     },
3396
3397 SQMP
3398 query-rx-filter
3399 ---------------
3400
3401 Show rx-filter information.
3402
3403 Returns a json-array of rx-filter information for all NICs (or for the
3404 given NIC), returning an error if the given NIC doesn't exist, or
3405 given NIC doesn't support rx-filter querying, or given net client
3406 isn't a NIC.
3407
3408 The query will clear the event notification flag of each NIC, then qemu
3409 will start to emit event to QMP monitor.
3410
3411 Each array entry contains the following:
3412
3413 - "name": net client name (json-string)
3414 - "promiscuous": promiscuous mode is enabled (json-bool)
3415 - "multicast": multicast receive state (one of 'normal', 'none', 'all')
3416 - "unicast": unicast receive state  (one of 'normal', 'none', 'all')
3417 - "vlan": vlan receive state (one of 'normal', 'none', 'all') (Since 2.0)
3418 - "broadcast-allowed": allow to receive broadcast (json-bool)
3419 - "multicast-overflow": multicast table is overflowed (json-bool)
3420 - "unicast-overflow": unicast table is overflowed (json-bool)
3421 - "main-mac": main macaddr string (json-string)
3422 - "vlan-table": a json-array of active vlan id
3423 - "unicast-table": a json-array of unicast macaddr string
3424 - "multicast-table": a json-array of multicast macaddr string
3425
3426 Example:
3427
3428 -> { "execute": "query-rx-filter", "arguments": { "name": "vnet0" } }
3429 <- { "return": [
3430         {
3431             "promiscuous": true,
3432             "name": "vnet0",
3433             "main-mac": "52:54:00:12:34:56",
3434             "unicast": "normal",
3435             "vlan": "normal",
3436             "vlan-table": [
3437                 4,
3438                 0
3439             ],
3440             "unicast-table": [
3441             ],
3442             "multicast": "normal",
3443             "multicast-overflow": false,
3444             "unicast-overflow": false,
3445             "multicast-table": [
3446                 "01:00:5e:00:00:01",
3447                 "33:33:00:00:00:01",
3448                 "33:33:ff:12:34:56"
3449             ],
3450             "broadcast-allowed": false
3451         }
3452       ]
3453    }
3454
3455 EQMP
3456
3457     {
3458         .name       = "blockdev-add",
3459         .args_type  = "options:q",
3460         .mhandler.cmd_new = qmp_marshal_input_blockdev_add,
3461     },
3462
3463 SQMP
3464 blockdev-add
3465 ------------
3466
3467 Add a block device.
3468
3469 Arguments:
3470
3471 - "options": block driver options
3472
3473 Example (1):
3474
3475 -> { "execute": "blockdev-add",
3476     "arguments": { "options" : { "driver": "qcow2",
3477                                  "file": { "driver": "file",
3478                                            "filename": "test.qcow2" } } } }
3479 <- { "return": {} }
3480
3481 Example (2):
3482
3483 -> { "execute": "blockdev-add",
3484      "arguments": {
3485          "options": {
3486            "driver": "qcow2",
3487            "id": "my_disk",
3488            "discard": "unmap",
3489            "cache": {
3490                "direct": true,
3491                "writeback": true
3492            },
3493            "file": {
3494                "driver": "file",
3495                "filename": "/tmp/test.qcow2"
3496            },
3497            "backing": {
3498                "driver": "raw",
3499                "file": {
3500                    "driver": "file",
3501                    "filename": "/dev/fdset/4"
3502                }
3503            }
3504          }
3505        }
3506      }
3507
3508 <- { "return": {} }
3509
3510 EQMP
3511
3512     {
3513         .name       = "query-named-block-nodes",
3514         .args_type  = "",
3515         .mhandler.cmd_new = qmp_marshal_input_query_named_block_nodes,
3516     },
3517
3518 SQMP
3519 @query-named-block-nodes
3520 ------------------------
3521
3522 Return a list of BlockDeviceInfo for all the named block driver nodes
3523
3524 Example:
3525
3526 -> { "execute": "query-named-block-nodes" }
3527 <- { "return": [ { "ro":false,
3528                    "drv":"qcow2",
3529                    "encrypted":false,
3530                    "file":"disks/test.qcow2",
3531                    "node-name": "my-node",
3532                    "backing_file_depth":1,
3533                    "bps":1000000,
3534                    "bps_rd":0,
3535                    "bps_wr":0,
3536                    "iops":1000000,
3537                    "iops_rd":0,
3538                    "iops_wr":0,
3539                    "bps_max": 8000000,
3540                    "bps_rd_max": 0,
3541                    "bps_wr_max": 0,
3542                    "iops_max": 0,
3543                    "iops_rd_max": 0,
3544                    "iops_wr_max": 0,
3545                    "iops_size": 0,
3546                    "image":{
3547                       "filename":"disks/test.qcow2",
3548                       "format":"qcow2",
3549                       "virtual-size":2048000,
3550                       "backing_file":"base.qcow2",
3551                       "full-backing-filename":"disks/base.qcow2",
3552                       "backing-filename-format:"qcow2",
3553                       "snapshots":[
3554                          {
3555                             "id": "1",
3556                             "name": "snapshot1",
3557                             "vm-state-size": 0,
3558                             "date-sec": 10000200,
3559                             "date-nsec": 12,
3560                             "vm-clock-sec": 206,
3561                             "vm-clock-nsec": 30
3562                          }
3563                       ],
3564                       "backing-image":{
3565                           "filename":"disks/base.qcow2",
3566                           "format":"qcow2",
3567                           "virtual-size":2048000
3568                       }
3569                    } } ] }
3570
3571 EQMP