drivers/usb/host/ehci-au1xxx.c

   1 /*
   2  * EHCI HCD (Host Controller Driver) for USB.
   3  *
   4  * Bus Glue for AMD Alchemy Au1xxx
   5  *
   6  * Based on "ohci-au1xxx.c" by Matt Porter <mporter@kernel.crashing.org>
   7  *
   8  * Modified for AMD Alchemy Au1200 EHC
   9  *  by K.Boge <karsten.boge@amd.com>
  10  *
  11  * This file is licenced under the GPL.
  12  */
  13
  14 #include <linux/platform_device.h>
  15 #include <asm/mach-au1x00/au1000.h>
  16
  17 #define USB_HOST_CONFIG   (USB_MSR_BASE + USB_MSR_MCFG)
  18 #define USB_MCFG_PFEN     (1<<31)
  19 #define USB_MCFG_RDCOMB   (1<<30)
  20 #define USB_MCFG_SSDEN    (1<<23)
  21 #define USB_MCFG_PHYPLLEN (1<<19)
  22 #define USB_MCFG_EHCCLKEN (1<<17)
  23 #define USB_MCFG_UCAM     (1<<7)
  24 #define USB_MCFG_EBMEN    (1<<3)
  25 #define USB_MCFG_EMEMEN   (1<<2)
  26
  27 #define USBH_ENABLE_CE    (USB_MCFG_PHYPLLEN | USB_MCFG_EHCCLKEN)
  28
  29 #ifdef CONFIG_DMA_COHERENT
  30 #define USBH_ENABLE_INIT  (USBH_ENABLE_CE \
  31                          | USB_MCFG_PFEN | USB_MCFG_RDCOMB \
  32                          | USB_MCFG_SSDEN | USB_MCFG_UCAM \
  33                          | USB_MCFG_EBMEN | USB_MCFG_EMEMEN)
  34 #else
  35 #define USBH_ENABLE_INIT  (USBH_ENABLE_CE \
  36                          | USB_MCFG_PFEN | USB_MCFG_RDCOMB \
  37                          | USB_MCFG_SSDEN \
  38                          | USB_MCFG_EBMEN | USB_MCFG_EMEMEN)
  39 #endif
  40 #define USBH_DISABLE      (USB_MCFG_EBMEN | USB_MCFG_EMEMEN)
  41
  42 extern int usb_disabled(void);
  43
  44 /*-------------------------------------------------------------------------*/
  45
  46 static void au1xxx_start_ehc(struct platform_device *dev)
  47 {
  48         pr_debug(__FILE__ ": starting Au1xxx EHCI USB Controller\n");
  49
  50         /* write HW defaults again in case Yamon cleared them */
  51         if (au_readl(USB_HOST_CONFIG) == 0) {
  52                 au_writel(0x00d02000, USB_HOST_CONFIG);
  53                 au_readl(USB_HOST_CONFIG);
  54                 udelay(1000);
  55         }
  56         /* enable host controller */
  57         au_writel(USBH_ENABLE_CE | au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
  58         au_readl(USB_HOST_CONFIG);
  59         udelay(1000);
  60         au_writel(USBH_ENABLE_INIT | au_readl(USB_HOST_CONFIG),
  61                   USB_HOST_CONFIG);
  62         au_readl(USB_HOST_CONFIG);
  63         udelay(1000);
  64
  65         pr_debug(__FILE__ ": Clock to USB host has been enabled\n");
  66 }
  67
  68 static void au1xxx_stop_ehc(struct platform_device *dev)
  69 {
  70         pr_debug(__FILE__ ": stopping Au1xxx EHCI USB Controller\n");
  71
  72         /* Disable mem */
  73         au_writel(~USBH_DISABLE & au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
  74         udelay(1000);
  75         /* Disable clock */
  76         au_writel(~USB_MCFG_EHCCLKEN & au_readl(USB_HOST_CONFIG),
  77                   USB_HOST_CONFIG);
  78         au_readl(USB_HOST_CONFIG);
  79 }
  80
  81 /*-------------------------------------------------------------------------*/
  82
  83 /* configure so an HC device and id are always provided */
  84 /* always called with process context; sleeping is OK */
  85
  86 /**
  87  * usb_ehci_au1xxx_probe - initialize Au1xxx-based HCDs
  88  * Context: !in_interrupt()
  89  *
  90  * Allocates basic resources for this USB host controller, and
  91  * then invokes the start() method for the HCD associated with it
  92  * through the hotplug entry's driver_data.
  93  *
  94  */
  95 int usb_ehci_au1xxx_probe(const struct hc_driver *driver,
  96                           struct usb_hcd **hcd_out, struct platform_device *dev)
  97 {
  98         int retval;
  99         struct usb_hcd *hcd;
 100         struct ehci_hcd *ehci;
 101
 102 #if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT)
 103
 104         /* Au1200 AB USB does not support coherent memory */
 105         if (!(read_c0_prid() & 0xff)) {
 106                 pr_info("%s: this is chip revision AB!\n", dev->name);
 107                 pr_info("%s: update your board or re-configure the kernel\n",
 108                         dev->name);
 109                 return -ENODEV;
 110         }
 111 #endif
 112
 113         au1xxx_start_ehc(dev);
 114
 115         if (dev->resource[1].flags != IORESOURCE_IRQ) {
 116                 pr_debug("resource[1] is not IORESOURCE_IRQ");
 117                 retval = -ENOMEM;
 118         }
 119         hcd = usb_create_hcd(driver, &dev->dev, "Au1xxx");
 120         if (!hcd)
 121                 return -ENOMEM;
 122         hcd->rsrc_start = dev->resource[0].start;
 123         hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
 124
 125         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 126                 pr_debug("request_mem_region failed");
 127                 retval = -EBUSY;
 128                 goto err1;
 129         }
 130
 131         hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 132         if (!hcd->regs) {
 133                 pr_debug("ioremap failed");
 134                 retval = -ENOMEM;
 135                 goto err2;
 136         }
 137
 138         ehci = hcd_to_ehci(hcd);
 139         ehci->caps = hcd->regs;
 140         ehci->regs = hcd->regs + HC_LENGTH(readl(&ehci->caps->hc_capbase));
 141         /* cache this readonly data; minimize chip reads */
 142         ehci->hcs_params = readl(&ehci->caps->hcs_params);
 143
 144         /* ehci_hcd_init(hcd_to_ehci(hcd)); */
 145
 146         retval =
 147             usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED | IRQF_SHARED);
 148         if (retval == 0)
 149                 return retval;
 150
 151         au1xxx_stop_ehc(dev);
 152         iounmap(hcd->regs);
 153 err2:
 154         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 155 err1:
 156         usb_put_hcd(hcd);
 157         return retval;
 158 }
 159
 160 /* may be called without controller electrically present */
 161 /* may be called with controller, bus, and devices active */
 162
 163 /**
 164  * usb_ehci_hcd_au1xxx_remove - shutdown processing for Au1xxx-based HCDs
 165  * @dev: USB Host Controller being removed
 166  * Context: !in_interrupt()
 167  *
 168  * Reverses the effect of usb_ehci_hcd_au1xxx_probe(), first invoking
 169  * the HCD's stop() method.  It is always called from a thread
 170  * context, normally "rmmod", "apmd", or something similar.
 171  *
 172  */
 173 void usb_ehci_au1xxx_remove(struct usb_hcd *hcd, struct platform_device *dev)
 174 {
 175         usb_remove_hcd(hcd);
 176         iounmap(hcd->regs);
 177         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 178         usb_put_hcd(hcd);
 179         au1xxx_stop_ehc(dev);
 180 }
 181
 182 /*-------------------------------------------------------------------------*/
 183
 184 static const struct hc_driver ehci_au1xxx_hc_driver = {
 185         .description = hcd_name,
 186         .product_desc = "Au1xxx EHCI",
 187         .hcd_priv_size = sizeof(struct ehci_hcd),
 188
 189         /*
 190          * generic hardware linkage
 191          */
 192         .irq = ehci_irq,
 193         .flags = HCD_MEMORY | HCD_USB2,
 194
 195         /*
 196          * basic lifecycle operations
 197          *
 198          * FIXME -- ehci_init() doesn't do enough here.
 199          * See ehci-ppc-soc for a complete implementation.
 200          */
 201         .reset = ehci_init,
 202         .start = ehci_run,
 203         .stop = ehci_stop,
 204         .shutdown = ehci_shutdown,
 205
 206         /*
 207          * managing i/o requests and associated device resources
 208          */
 209         .urb_enqueue = ehci_urb_enqueue,
 210         .urb_dequeue = ehci_urb_dequeue,
 211         .endpoint_disable = ehci_endpoint_disable,
 212
 213         /*
 214          * scheduling support
 215          */
 216         .get_frame_number = ehci_get_frame,
 217
 218         /*
 219          * root hub support
 220          */
 221         .hub_status_data = ehci_hub_status_data,
 222         .hub_control = ehci_hub_control,
 223 #ifdef  CONFIG_PM
 224         .hub_suspend = ehci_hub_suspend,
 225         .hub_resume = ehci_hub_resume,
 226 #endif
 227 };
 228
 229 /*-------------------------------------------------------------------------*/
 230
 231 static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 232 {
 233         struct usb_hcd *hcd = NULL;
 234         int ret;
 235
 236         pr_debug("In ehci_hcd_au1xxx_drv_probe\n");
 237
 238         if (usb_disabled())
 239                 return -ENODEV;
 240
 241         ret = usb_ehci_au1xxx_probe(&ehci_au1xxx_hc_driver, &hcd, pdev);
 242         return ret;
 243 }
 244
 245 static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
 246 {
 247         struct usb_hcd *hcd = platform_get_drvdata(pdev);
 248
 249         usb_ehci_au1xxx_remove(hcd, pdev);
 250         return 0;
 251 }
 252
 253  /*TBD*/
 254 /*static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
 255 {
 256         struct platform_device *pdev = to_platform_device(dev);
 257         struct usb_hcd *hcd = dev_get_drvdata(dev);
 258
 259         return 0;
 260 }
 261 static int ehci_hcd_au1xxx_drv_resume(struct device *dev)
 262 {
 263         struct platform_device *pdev = to_platform_device(dev);
 264         struct usb_hcd *hcd = dev_get_drvdata(dev);
 265
 266         return 0;
 267 }
 268 */
 269 MODULE_ALIAS("au1xxx-ehci");
 270 static struct platform_driver ehci_hcd_au1xxx_driver = {
 271         .probe = ehci_hcd_au1xxx_drv_probe,
 272         .remove = ehci_hcd_au1xxx_drv_remove,
 273         .shutdown = usb_hcd_platform_shutdown,
 274         /*.suspend      = ehci_hcd_au1xxx_drv_suspend, */
 275         /*.resume       = ehci_hcd_au1xxx_drv_resume, */
 276         .driver = {
 277                 .name = "au1xxx-ehci",
 278                 .bus = &platform_bus_type
 279         }
 280 };