1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * Copyright (C) 2008 by Spencer Oliver *
6 * spen@spen-soft.co.uk *
8 * Copyright (C) 2011 by Clement Burin des Roziers *
9 * clement.burin-des-roziers@hikob.com *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program; if not, write to the *
23 * Free Software Foundation, Inc., *
24 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
25 ***************************************************************************/
31 #include <helper/binarybuffer.h>
32 #include <target/algorithm.h>
33 #include <target/armv7m.h>
35 /* stm32lx flash register locations */
37 #define FLASH_BASE 0x40023C00
38 #define FLASH_ACR 0x40023C00
39 #define FLASH_PECR 0x40023C04
40 #define FLASH_PDKEYR 0x40023C08
41 #define FLASH_PEKEYR 0x40023C0C
42 #define FLASH_PRGKEYR 0x40023C10
43 #define FLASH_OPTKEYR 0x40023C14
44 #define FLASH_SR 0x40023C18
45 #define FLASH_OBR 0x40023C1C
46 #define FLASH_WRPR 0x40023C20
49 #define FLASH_ACR__LATENCY (1<<0)
50 #define FLASH_ACR__PRFTEN (1<<1)
51 #define FLASH_ACR__ACC64 (1<<2)
52 #define FLASH_ACR__SLEEP_PD (1<<3)
53 #define FLASH_ACR__RUN_PD (1<<4)
56 #define FLASH_PECR__PELOCK (1<<0)
57 #define FLASH_PECR__PRGLOCK (1<<1)
58 #define FLASH_PECR__OPTLOCK (1<<2)
59 #define FLASH_PECR__PROG (1<<3)
60 #define FLASH_PECR__DATA (1<<4)
61 #define FLASH_PECR__FTDW (1<<8)
62 #define FLASH_PECR__ERASE (1<<9)
63 #define FLASH_PECR__FPRG (1<<10)
64 #define FLASH_PECR__EOPIE (1<<16)
65 #define FLASH_PECR__ERRIE (1<<17)
66 #define FLASH_PECR__OBL_LAUNCH (1<<18)
69 #define FLASH_SR__BSY (1<<0)
70 #define FLASH_SR__EOP (1<<1)
71 #define FLASH_SR__ENDHV (1<<2)
72 #define FLASH_SR__READY (1<<3)
73 #define FLASH_SR__WRPERR (1<<8)
74 #define FLASH_SR__PGAERR (1<<9)
75 #define FLASH_SR__SIZERR (1<<10)
76 #define FLASH_SR__OPTVERR (1<<11)
79 #define PEKEY1 0x89ABCDEF
80 #define PEKEY2 0x02030405
81 #define PRGKEY1 0x8C9DAEBF
82 #define PRGKEY2 0x13141516
83 #define OPTKEY1 0xFBEAD9C8
84 #define OPTKEY2 0x24252627
87 #define DBGMCU_IDCODE 0xE0042000
88 #define F_SIZE 0x1FF8004C
91 #define FLASH_PAGE_SIZE 256
92 #define FLASH_SECTOR_SIZE 4096
93 #define FLASH_PAGES_PER_SECTOR 16
94 #define FLASH_BANK0_ADDRESS 0x08000000
96 /* stm32lx option byte register location */
97 #define OB_RDP 0x1FF80000
98 #define OB_USER 0x1FF80004
99 #define OB_WRP0_1 0x1FF80008
100 #define OB_WRP2_3 0x1FF8000C
103 #define OB_RDP__LEVEL0 0xFF5500AA
104 #define OB_RDP__LEVEL1 0xFFFF0000
106 /* stm32lx RCC register locations */
107 #define RCC_CR 0x40023800
108 #define RCC_ICSCR 0x40023804
109 #define RCC_CFGR 0x40023808
112 #define RCC_ICSCR__MSIRANGE_MASK (7<<13)
114 static int stm32lx_unlock_program_memory(struct flash_bank
*bank
);
115 static int stm32lx_lock_program_memory(struct flash_bank
*bank
);
116 static int stm32lx_enable_write_half_page(struct flash_bank
*bank
);
117 static int stm32lx_erase_sector(struct flash_bank
*bank
, int sector
);
118 static int stm32lx_wait_until_bsy_clear(struct flash_bank
*bank
);
120 struct stm32lx_flash_bank
122 struct working_area
*write_algorithm
;
126 /* flash bank stm32lx <base> <size> 0 0 <target#>
128 FLASH_BANK_COMMAND_HANDLER(stm32lx_flash_bank_command
)
130 struct stm32lx_flash_bank
*stm32lx_info
;
133 return ERROR_COMMAND_SYNTAX_ERROR
;
136 // Create the bank structure
137 stm32lx_info
= malloc(sizeof(struct stm32lx_flash_bank
));
140 if (stm32lx_info
== NULL
)
142 LOG_ERROR("failed to allocate bank structure");
146 bank
->driver_priv
= stm32lx_info
;
148 stm32lx_info
->write_algorithm
= NULL
;
149 stm32lx_info
->probed
= 0;
154 static int stm32lx_protect_check(struct flash_bank
*bank
)
157 struct target
*target
= bank
->target
;
161 if (target
->state
!= TARGET_HALTED
)
163 LOG_ERROR("Target not halted");
164 return ERROR_TARGET_NOT_HALTED
;
168 * Read the WRPR word, and check each bit (corresponding to each
171 retval
= target_read_u32(target
, FLASH_WRPR
, &wrpr
);
172 if (retval
!= ERROR_OK
)
175 for (int i
= 0; i
< 32; i
++)
179 bank
->sectors
[i
].is_protected
= 1;
183 bank
->sectors
[i
].is_protected
= 0;
189 static int stm32lx_erase(struct flash_bank
*bank
, int first
, int last
)
194 * It could be possible to do a mass erase if all sectors must be
195 * erased, but it is not implemented yet.
198 if (bank
->target
->state
!= TARGET_HALTED
)
200 LOG_ERROR("Target not halted");
201 return ERROR_TARGET_NOT_HALTED
;
205 * Loop over the selected sectors and erase them
207 for (int i
= first
; i
<= last
; i
++)
209 retval
= stm32lx_erase_sector(bank
, i
);
210 if (retval
!= ERROR_OK
)
212 bank
->sectors
[i
].is_erased
= 1;
217 static int stm32lx_protect(struct flash_bank
*bank
, int set
, int first
,
220 LOG_WARNING("protection of the STM32L flash is not implemented");
224 static int stm32lx_write_half_pages(struct flash_bank
*bank
, uint8_t *buffer
,
225 uint32_t offset
, uint32_t count
)
227 struct stm32lx_flash_bank
*stm32lx_info
= bank
->driver_priv
;
228 struct target
*target
= bank
->target
;
229 uint32_t buffer_size
= 4096 * 4;
230 struct working_area
*source
;
231 uint32_t address
= bank
->base
+ offset
;
233 struct reg_param reg_params
[5];
234 struct armv7m_algorithm armv7m_info
;
236 int retval
= ERROR_OK
;
239 /* see contib/loaders/flash/stm32lx.s for src */
241 static const uint16_t stm32lx_flash_write_code_16
[] =
243 // 00000000 <write_word-0x4>:
244 0x2300, // 0: 2300 movs r3, #0
245 0xe004, // 2: e004 b.n e <test_done>
247 // 00000004 <write_word>:
248 0xf851, 0xcb04, // 4: f851 cb04 ldr.w ip, [r1], #4
249 0xf840, 0xcb04, // 8: f840 cb04 str.w ip, [r0], #4
250 0x3301, // c: 3301 adds r3, #1
252 // 0000000e <test_done>:
253 0x4293, // e: 4293 cmp r3, r2
254 0xd3f8, // 10: d3f8 bcc.n 4 <write_word>
255 0xbe00, // 12: be00 bkpt 0x0000
260 uint8_t stm32lx_flash_write_code
[sizeof(stm32lx_flash_write_code_16
)];
261 for (unsigned int i
= 0; i
< sizeof(stm32lx_flash_write_code_16
) / 2; i
++)
263 stm32lx_flash_write_code
[i
* 2 + 0] = stm32lx_flash_write_code_16
[i
]
265 stm32lx_flash_write_code
[i
* 2 + 1] = (stm32lx_flash_write_code_16
[i
]
268 // Check if there is an even number of half pages (128bytes)
271 LOG_ERROR("there should be an even number "
272 "of half pages = 128 bytes (count = %" PRIi32
" bytes)", count
);
276 // Allocate working area
277 reg32
= sizeof(stm32lx_flash_write_code
);
278 // Add bytes to make 4byte aligned
279 reg32
+= (4 - (reg32
% 4)) % 4;
280 retval
= target_alloc_working_area(target
, reg32
,
281 &stm32lx_info
->write_algorithm
);
282 if (retval
!= ERROR_OK
)
285 // Write the flashing code
286 retval
= target_write_buffer(target
,
287 stm32lx_info
->write_algorithm
->address
,
288 sizeof(stm32lx_flash_write_code
),
289 (uint8_t*) stm32lx_flash_write_code
);
290 if (retval
!= ERROR_OK
)
292 target_free_working_area(target
, stm32lx_info
->write_algorithm
);
296 // Allocate half pages memory
297 while (target_alloc_working_area_try(target
, buffer_size
, &source
)
300 if (buffer_size
> 1024)
305 if (buffer_size
<= 256)
307 /* if we already allocated the writing code, but failed to get a
308 * buffer, free the algorithm */
309 if (stm32lx_info
->write_algorithm
)
310 target_free_working_area(target
, stm32lx_info
->write_algorithm
);
312 LOG_WARNING("no large enough working area available, can't do block memory writes");
313 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
316 LOG_DEBUG("allocated working area for data (%" PRIx32
" bytes)", buffer_size
);
318 armv7m_info
.common_magic
= ARMV7M_COMMON_MAGIC
;
319 armv7m_info
.core_mode
= ARMV7M_MODE_ANY
;
320 init_reg_param(®_params
[0], "r0", 32, PARAM_OUT
);
321 init_reg_param(®_params
[1], "r1", 32, PARAM_OUT
);
322 init_reg_param(®_params
[2], "r2", 32, PARAM_OUT
);
323 init_reg_param(®_params
[3], "r3", 32, PARAM_IN_OUT
);
324 init_reg_param(®_params
[4], "r4", 32, PARAM_OUT
);
326 // Enable half-page write
327 retval
= stm32lx_enable_write_half_page(bank
);
328 if (retval
!= ERROR_OK
)
331 target_free_working_area(target
, source
);
332 target_free_working_area(target
, stm32lx_info
->write_algorithm
);
334 destroy_reg_param(®_params
[0]);
335 destroy_reg_param(®_params
[1]);
336 destroy_reg_param(®_params
[2]);
337 destroy_reg_param(®_params
[3]);
342 // Loop while there are bytes to write
346 this_count
= (count
> buffer_size
) ? buffer_size
: count
;
348 // Write the next half pages
349 retval
= target_write_buffer(target
, source
->address
, this_count
,
351 if (retval
!= ERROR_OK
)
354 // 4: Store useful information in the registers
355 // the destination address of the copy (R0)
356 buf_set_u32(reg_params
[0].value
, 0, 32, address
);
357 // The source address of the copy (R1)
358 buf_set_u32(reg_params
[1].value
, 0, 32, source
->address
);
359 // The length of the copy (R2)
360 buf_set_u32(reg_params
[2].value
, 0, 32, this_count
/ 4);
362 // 5: Execute the bunch of code
363 retval
= target_run_algorithm(target
, 0, NULL
, sizeof(reg_params
)
364 / sizeof(*reg_params
), reg_params
,
365 stm32lx_info
->write_algorithm
->address
, 0, 20000, &armv7m_info
);
366 if (retval
!= ERROR_OK
)
369 // 6: Wait while busy
370 retval
= stm32lx_wait_until_bsy_clear(bank
);
371 if (retval
!= ERROR_OK
)
374 buffer
+= this_count
;
375 address
+= this_count
;
379 if (retval
== ERROR_OK
)
380 retval
= stm32lx_lock_program_memory(bank
);
382 target_free_working_area(target
, source
);
383 target_free_working_area(target
, stm32lx_info
->write_algorithm
);
385 destroy_reg_param(®_params
[0]);
386 destroy_reg_param(®_params
[1]);
387 destroy_reg_param(®_params
[2]);
388 destroy_reg_param(®_params
[3]);
392 static int stm32lx_write(struct flash_bank
*bank
, uint8_t *buffer
,
393 uint32_t offset
, uint32_t count
)
395 struct target
*target
= bank
->target
;
397 uint32_t halfpages_number
;
398 uint32_t words_remaining
;
399 uint32_t bytes_remaining
;
400 uint32_t address
= bank
->base
+ offset
;
401 uint32_t bytes_written
= 0;
404 if (bank
->target
->state
!= TARGET_HALTED
)
406 LOG_ERROR("Target not halted");
407 return ERROR_TARGET_NOT_HALTED
;
412 LOG_ERROR("offset 0x%" PRIx32
" breaks required 2-byte alignment", offset
);
413 return ERROR_FLASH_DST_BREAKS_ALIGNMENT
;
416 // Check if there are some full half pages
417 if (((offset
% 128) == 0) && (count
>= 128))
419 halfpages_number
= count
/ 128;
420 words_remaining
= (count
- 128 * halfpages_number
) / 4;
421 bytes_remaining
= (count
& 0x3);
425 halfpages_number
= 0;
426 words_remaining
= (count
/ 4);
427 bytes_remaining
= (count
& 0x3);
430 if (halfpages_number
)
432 retval
= stm32lx_write_half_pages(bank
, buffer
, offset
, 128
434 if (retval
!= ERROR_OK
)
438 bytes_written
= 128 * halfpages_number
;
440 retval
= stm32lx_unlock_program_memory(bank
);
441 if (retval
!= ERROR_OK
)
444 while (words_remaining
> 0)
447 uint8_t* p
= buffer
+ bytes_written
;
449 // Prepare the word, Little endian conversion
450 value
= p
[0] + (p
[1] << 8) + (p
[2] << 16) + (p
[3] << 24);
452 retval
= target_write_u32(target
, address
, value
);
453 if (retval
!= ERROR_OK
)
460 retval
= stm32lx_wait_until_bsy_clear(bank
);
461 if (retval
!= ERROR_OK
)
467 uint8_t last_word
[4] = {0xff, 0xff, 0xff, 0xff};
469 /* copy the last remaining bytes into the write buffer */
470 memcpy(last_word
, buffer
+bytes_written
, bytes_remaining
);
472 retval
= target_write_buffer(target
, address
, 4, last_word
);
473 if (retval
!= ERROR_OK
)
476 retval
= stm32lx_wait_until_bsy_clear(bank
);
477 if (retval
!= ERROR_OK
)
481 retval
= stm32lx_lock_program_memory(bank
);
482 if (retval
!= ERROR_OK
)
488 static int stm32lx_probe(struct flash_bank
*bank
)
490 struct target
*target
= bank
->target
;
491 struct stm32lx_flash_bank
*stm32lx_info
= bank
->driver_priv
;
497 stm32lx_info
->probed
= 0;
499 /* read stm32 device id register */
500 int retval
= target_read_u32(target
, DBGMCU_IDCODE
, &device_id
);
501 if (retval
!= ERROR_OK
)
504 LOG_DEBUG("device id = 0x%08" PRIx32
"", device_id
);
506 if ((device_id
& 0xfff) != 0x416) {
507 LOG_WARNING("Cannot identify target as a STM32L family.");
511 // Read the RDP byte and check if it is 0xAA
513 retval
= target_read_u32(target
, FLASH_OBR
, ®32
);
514 if (retval
!= ERROR_OK
)
520 * Unlocking the option byte is done by unlocking the PECR, then
521 * by writing the 2 option byte keys to OPTKEYR
524 /* To unlock the PECR write the 2 PEKEY to the PEKEYR register */
525 retval
= target_write_u32(target
, FLASH_PEKEYR
, PEKEY1
);
526 if (retval
!= ERROR_OK
)
529 retval
= target_write_u32(target
, FLASH_PEKEYR
, PEKEY2
);
530 if (retval
!= ERROR_OK
)
533 /* Make sure it worked */
534 retval
= target_read_u32(target
, FLASH_PECR
, ®32
);
535 if (retval
!= ERROR_OK
)
538 if (reg32
& FLASH_PECR__PELOCK
)
539 return ERROR_FLASH_OPERATION_FAILED
;
541 retval
= target_write_u32(target
, FLASH_OPTKEYR
, OPTKEY1
);
542 if (retval
!= ERROR_OK
)
544 retval
= target_write_u32(target
, FLASH_OPTKEYR
, OPTKEY2
);
545 if (retval
!= ERROR_OK
)
548 retval
= target_read_u32(target
, FLASH_PECR
, ®32
);
549 if (retval
!= ERROR_OK
)
552 if (reg32
& FLASH_PECR__OPTLOCK
)
554 LOG_ERROR("OPTLOCK is not cleared");
555 return ERROR_FLASH_OPERATION_FAILED
;
558 // Then, write RDP to 0x00 to set level 1
559 reg32
= ((~0xAA) << 16) | (0xAA);
560 retval
= target_write_u32(target
, OB_RDP
, reg32
);
561 if (retval
!= ERROR_OK
)
564 // Set Automatic update of the option byte, by setting OBL_LAUNCH in FLASH_PECR
565 reg32
= FLASH_PECR__OBL_LAUNCH
;
566 retval
= target_write_u32(target
, FLASH_PECR
, reg32
);
567 if (retval
!= ERROR_OK
)
571 /* get flash size from target. */
572 retval
= target_read_u16(target
, F_SIZE
, &flash_size
);
573 if (retval
!= ERROR_OK
)
576 /* check for valid flash size */
577 if (flash_size
== 0xffff)
579 /* number of sectors incorrect on revA */
580 LOG_ERROR("STM32 flash size failed, probe inaccurate");
584 /* STM32L - we have 32 sectors, 16 pages per sector -> 512 pages
585 * 16 pages for a protection area */
587 /* calculate numbers of sectors (4kB per sector) */
588 int num_sectors
= (flash_size
* 1024) / FLASH_SECTOR_SIZE
;
589 LOG_INFO("flash size = %dkbytes", flash_size
);
594 bank
->sectors
= NULL
;
597 bank
->base
= FLASH_BANK0_ADDRESS
;
598 bank
->size
= flash_size
* 1024;
599 bank
->num_sectors
= num_sectors
;
600 bank
->sectors
= malloc(sizeof(struct flash_sector
) * num_sectors
);
601 if (bank
->sectors
== NULL
)
603 LOG_ERROR("failed to allocate bank sectors");
607 for (i
= 0; i
< num_sectors
; i
++)
609 bank
->sectors
[i
].offset
= i
* FLASH_SECTOR_SIZE
;
610 bank
->sectors
[i
].size
= FLASH_SECTOR_SIZE
;
611 bank
->sectors
[i
].is_erased
= -1;
612 bank
->sectors
[i
].is_protected
= 1;
615 stm32lx_info
->probed
= 1;
620 static int stm32lx_auto_probe(struct flash_bank
*bank
)
622 struct stm32lx_flash_bank
*stm32lx_info
= bank
->driver_priv
;
624 if (stm32lx_info
->probed
)
629 return stm32lx_probe(bank
);
632 static int stm32lx_erase_check(struct flash_bank
*bank
)
634 struct target
*target
= bank
->target
;
635 const int buffer_size
= 4096;
638 int retval
= ERROR_OK
;
640 if (bank
->target
->state
!= TARGET_HALTED
)
642 LOG_ERROR("Target not halted");
643 return ERROR_TARGET_NOT_HALTED
;
646 uint8_t *buffer
= malloc(buffer_size
);
649 LOG_ERROR("failed to allocate read buffer");
653 for (i
= 0; i
< bank
->num_sectors
; i
++)
656 bank
->sectors
[i
].is_erased
= 1;
658 // Loop chunk by chunk over the sector
659 for (j
= 0; j
< bank
->sectors
[i
].size
; j
+= buffer_size
)
663 if (chunk
> (j
- bank
->sectors
[i
].size
))
665 chunk
= (j
- bank
->sectors
[i
].size
);
668 retval
= target_read_memory(target
, bank
->base
669 + bank
->sectors
[i
].offset
+ j
, 4, chunk
/ 4, buffer
);
670 if (retval
!= ERROR_OK
)
673 for (nBytes
= 0; nBytes
< chunk
; nBytes
++)
675 if (buffer
[nBytes
] != 0x00)
677 bank
->sectors
[i
].is_erased
= 0;
682 if (retval
!= ERROR_OK
)
691 static int stm32lx_get_info(struct flash_bank
*bank
, char *buf
, int buf_size
)
693 // This method must return a string displaying information about the bank
695 struct target
*target
= bank
->target
;
699 /* read stm32 device id register */
700 int retval
= target_read_u32(target
, DBGMCU_IDCODE
, &device_id
);
701 if (retval
!= ERROR_OK
)
704 if ((device_id
& 0xfff) == 0x416) {
705 printed
= snprintf(buf
, buf_size
, "stm32lx - Rev: ");
709 switch (device_id
>> 16)
712 snprintf(buf
, buf_size
, "A");
716 snprintf(buf
, buf_size
, "Y");
719 snprintf(buf
, buf_size
, "unknown");
725 snprintf(buf
, buf_size
, "Cannot identify target as a stm32lx");
732 static const struct command_registration stm32lx_exec_command_handlers
[] =
734 COMMAND_REGISTRATION_DONE
737 static const struct command_registration stm32lx_command_handlers
[] =
742 .help
= "stm32lx flash command group",
743 .chain
= stm32lx_exec_command_handlers
,
745 COMMAND_REGISTRATION_DONE
748 struct flash_driver stm32lx_flash
=
751 .commands
= stm32lx_command_handlers
,
752 .flash_bank_command
= stm32lx_flash_bank_command
,
753 .erase
= stm32lx_erase
,
754 .protect
= stm32lx_protect
,
755 .write
= stm32lx_write
,
756 .read
= default_flash_read
,
757 .probe
= stm32lx_probe
,
758 .auto_probe
= stm32lx_auto_probe
,
759 .erase_check
= stm32lx_erase_check
,
760 .protect_check
= stm32lx_protect_check
,
761 .info
= stm32lx_get_info
,
764 // Static methods implementation
766 static int stm32lx_unlock_program_memory(struct flash_bank
*bank
)
768 struct target
*target
= bank
->target
;
773 * Unlocking the program memory is done by unlocking the PECR,
774 * then by writing the 2 PRGKEY to the PRGKEYR register
777 /* To unlock the PECR write the 2 PEKEY to the PEKEYR register */
778 retval
= target_write_u32(target
, FLASH_PEKEYR
, PEKEY1
);
779 if (retval
!= ERROR_OK
)
782 retval
= target_write_u32(target
, FLASH_PEKEYR
, PEKEY2
);
783 if (retval
!= ERROR_OK
)
786 /* Make sure it worked */
787 retval
= target_read_u32(target
, FLASH_PECR
, ®32
);
788 if (retval
!= ERROR_OK
)
791 if (reg32
& FLASH_PECR__PELOCK
)
793 LOG_ERROR("PELOCK is not cleared :(");
794 return ERROR_FLASH_OPERATION_FAILED
;
797 retval
= target_write_u32(target
, FLASH_PRGKEYR
, PRGKEY1
);
798 if (retval
!= ERROR_OK
)
800 retval
= target_write_u32(target
, FLASH_PRGKEYR
, PRGKEY2
);
801 if (retval
!= ERROR_OK
)
804 /* Make sure it worked */
805 retval
= target_read_u32(target
, FLASH_PECR
, ®32
);
806 if (retval
!= ERROR_OK
)
809 if (reg32
& FLASH_PECR__PRGLOCK
)
811 LOG_ERROR("PRGLOCK is not cleared :(");
812 return ERROR_FLASH_OPERATION_FAILED
;
817 static int stm32lx_enable_write_half_page(struct flash_bank
*bank
)
819 struct target
*target
= bank
->target
;
824 * Unlock the program memory, then set the FPRG bit in the PECR register.
826 retval
= stm32lx_unlock_program_memory(bank
);
827 if (retval
!= ERROR_OK
)
830 retval
= target_read_u32(target
, FLASH_PECR
, ®32
);
831 if (retval
!= ERROR_OK
)
834 reg32
|= FLASH_PECR__FPRG
;
835 retval
= target_write_u32(target
, FLASH_PECR
, reg32
);
836 if (retval
!= ERROR_OK
)
839 retval
= target_read_u32(target
, FLASH_PECR
, ®32
);
840 if (retval
!= ERROR_OK
)
843 reg32
|= FLASH_PECR__PROG
;
844 retval
= target_write_u32(target
, FLASH_PECR
, reg32
);
849 static int stm32lx_lock_program_memory(struct flash_bank
*bank
)
851 struct target
*target
= bank
->target
;
855 /* To lock the program memory, simply set the lock bit and lock PECR */
857 retval
= target_read_u32(target
, FLASH_PECR
, ®32
);
858 if (retval
!= ERROR_OK
)
861 reg32
|= FLASH_PECR__PRGLOCK
;
862 retval
= target_write_u32(target
, FLASH_PECR
, reg32
);
863 if (retval
!= ERROR_OK
)
866 retval
= target_read_u32(target
, FLASH_PECR
, ®32
);
867 if (retval
!= ERROR_OK
)
870 reg32
|= FLASH_PECR__PELOCK
;
871 retval
= target_write_u32(target
, FLASH_PECR
, reg32
);
872 if (retval
!= ERROR_OK
)
878 static int stm32lx_erase_sector(struct flash_bank
*bank
, int sector
)
880 struct target
*target
= bank
->target
;
885 * To erase a sector (i.e. FLASH_PAGES_PER_SECTOR pages),
886 * first unlock the memory, loop over the pages of this sector
887 * and write 0x0 to its first word.
890 retval
= stm32lx_unlock_program_memory(bank
);
891 if (retval
!= ERROR_OK
)
894 for (int page
= 0; page
< FLASH_PAGES_PER_SECTOR
; page
++)
896 reg32
= FLASH_PECR__PROG
| FLASH_PECR__ERASE
;
897 retval
= target_write_u32(target
, FLASH_PECR
, reg32
);
898 if (retval
!= ERROR_OK
)
901 retval
= stm32lx_wait_until_bsy_clear(bank
);
902 if (retval
!= ERROR_OK
)
905 uint32_t addr
= bank
->base
+ bank
->sectors
[sector
].offset
+ (page
907 retval
= target_write_u32(target
, addr
, 0x0);
908 if (retval
!= ERROR_OK
)
911 retval
= stm32lx_wait_until_bsy_clear(bank
);
912 if (retval
!= ERROR_OK
)
916 retval
= stm32lx_lock_program_memory(bank
);
917 if (retval
!= ERROR_OK
)
923 static int stm32lx_wait_until_bsy_clear(struct flash_bank
*bank
)
925 struct target
*target
= bank
->target
;
927 int retval
= ERROR_OK
;
930 /* wait for busy to clear */
933 retval
= target_read_u32(target
, FLASH_SR
, &status
);
934 if (retval
!= ERROR_OK
)
937 if ((status
& FLASH_SR__BSY
) == 0)
943 LOG_ERROR("timed out waiting for flash");
949 if (status
& FLASH_SR__WRPERR
)
951 LOG_ERROR("access denied / write protected");
955 if (status
& FLASH_SR__PGAERR
)
957 LOG_ERROR("invalid program address");