?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
propagate return status of set_breakpoint() up call chain
[openocd/jflash.git] / src / target / cortex_m3.c
blob3011b59771652a061b1c58666628c569c6f72e80
1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
4 * *
5 * Copyright (C) 2006 by Magnus Lundin *
6 * lundin@mlu.mine.nu *
7 * *
8 * Copyright (C) 2008 by Spencer Oliver *
9 * spen@spen-soft.co.uk *
10 * *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
15 * *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
20 * *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program; if not, write to the *
23 * Free Software Foundation, Inc., *
24 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
25 * *
26 * *
27 * Cortex-M3(tm) TRM, ARM DDI 0337E (r1p1) and 0337G (r2p0) *
28 * *
29 ***************************************************************************/
30 #ifdef HAVE_CONFIG_H
31 #include "config.h"
32 #endif
33
34 #include "breakpoints.h"
35 #include "cortex_m3.h"
36 #include "target_request.h"
37 #include "target_type.h"
38 #include "arm_disassembler.h"
39 #include "register.h"
40 #include "arm_opcodes.h"
41 #include "arm_semihosting.h"
42
43 /* NOTE: most of this should work fine for the Cortex-M1 and
44 * Cortex-M0 cores too, although they're ARMv6-M not ARMv7-M.
45 * Some differences: M0/M1 doesn't have FBP remapping or the
46 * DWT tracing/profiling support. (So the cycle counter will
47 * not be usable; the other stuff isn't currently used here.)
48 *
49 * Although there are some workarounds for errata seen only in r0p0
50 * silicon, such old parts are hard to find and thus not much tested
51 * any longer.
52 */
53
54
55 /* forward declarations */
56 static int cortex_m3_set_breakpoint(struct target *target, struct breakpoint *breakpoint);
57 static int cortex_m3_unset_breakpoint(struct target *target, struct breakpoint *breakpoint);
58 static void cortex_m3_enable_watchpoints(struct target *target);
59 static int cortex_m3_store_core_reg_u32(struct target *target,
60 enum armv7m_regtype type, uint32_t num, uint32_t value);
61
62 static int cortexm3_dap_read_coreregister_u32(struct adiv5_dap *swjdp,
63 uint32_t *value, int regnum)
64 {
65 int retval;
66 uint32_t dcrdr;
67
68 /* because the DCB_DCRDR is used for the emulated dcc channel
69 * we have to save/restore the DCB_DCRDR when used */
70
71 retval = mem_ap_read_u32(swjdp, DCB_DCRDR, &dcrdr);
72 if (retval != ERROR_OK)
73 return retval;
74
75 /* mem_ap_write_u32(swjdp, DCB_DCRSR, regnum); */
76 retval = dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_OFF, DCB_DCRSR & 0xFFFFFFF0);
77 if (retval != ERROR_OK)
78 return retval;
79 retval = dap_queue_ap_write(swjdp, AP_REG_BD0 | (DCB_DCRSR & 0xC), regnum);
80 if (retval != ERROR_OK)
81 return retval;
82
83 /* mem_ap_read_u32(swjdp, DCB_DCRDR, value); */
84 retval = dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_OFF, DCB_DCRDR & 0xFFFFFFF0);
85 if (retval != ERROR_OK)
86 return retval;
87 retval = dap_queue_ap_read(swjdp, AP_REG_BD0 | (DCB_DCRDR & 0xC), value);
88 if (retval != ERROR_OK)
89 return retval;
90
91 retval = dap_run(swjdp);
92 if (retval != ERROR_OK)
93 return retval;
94
95 /* restore DCB_DCRDR - this needs to be in a seperate
96 * transaction otherwise the emulated DCC channel breaks */
97 if (retval == ERROR_OK)
98 retval = mem_ap_write_atomic_u32(swjdp, DCB_DCRDR, dcrdr);
99
100 return retval;
101 }
102
103 static int cortexm3_dap_write_coreregister_u32(struct adiv5_dap *swjdp,
104 uint32_t value, int regnum)
105 {
106 int retval;
107 uint32_t dcrdr;
108
109 /* because the DCB_DCRDR is used for the emulated dcc channel
110 * we have to save/restore the DCB_DCRDR when used */
111
112 retval = mem_ap_read_u32(swjdp, DCB_DCRDR, &dcrdr);
113 if (retval != ERROR_OK)
114 return retval;
115
116 /* mem_ap_write_u32(swjdp, DCB_DCRDR, core_regs[i]); */
117 retval = dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_OFF, DCB_DCRDR & 0xFFFFFFF0);
118 if (retval != ERROR_OK)
119 return retval;
120 retval = dap_queue_ap_write(swjdp, AP_REG_BD0 | (DCB_DCRDR & 0xC), value);
121 // XXX check retval
122
123 /* mem_ap_write_u32(swjdp, DCB_DCRSR, i | DCRSR_WnR); */
124 retval = dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_OFF, DCB_DCRSR & 0xFFFFFFF0);
125 if (retval != ERROR_OK)
126 return retval;
127 retval = dap_queue_ap_write(swjdp, AP_REG_BD0 | (DCB_DCRSR & 0xC), regnum | DCRSR_WnR);
128 // XXX check retval
129
130 retval = dap_run(swjdp);
131
132 /* restore DCB_DCRDR - this needs to be in a seperate
133 * transaction otherwise the emulated DCC channel breaks */
134 if (retval == ERROR_OK)
135 retval = mem_ap_write_atomic_u32(swjdp, DCB_DCRDR, dcrdr);
136
137 return retval;
138 }
139
140 static int cortex_m3_write_debug_halt_mask(struct target *target,
141 uint32_t mask_on, uint32_t mask_off)
142 {
143 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
144 struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
145
146 /* mask off status bits */
147 cortex_m3->dcb_dhcsr &= ~((0xFFFF << 16) | mask_off);
148 /* create new register mask */
149 cortex_m3->dcb_dhcsr |= DBGKEY | C_DEBUGEN | mask_on;
150
151 return mem_ap_write_atomic_u32(swjdp, DCB_DHCSR, cortex_m3->dcb_dhcsr);
152 }
153
154 static int cortex_m3_clear_halt(struct target *target)
155 {
156 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
157 struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
158 int retval;
159
160 /* clear step if any */
161 cortex_m3_write_debug_halt_mask(target, C_HALT, C_STEP);
162
163 /* Read Debug Fault Status Register */
164 retval = mem_ap_read_atomic_u32(swjdp, NVIC_DFSR, &cortex_m3->nvic_dfsr);
165 if (retval != ERROR_OK)
166 return retval;
167
168 /* Clear Debug Fault Status */
169 retval = mem_ap_write_atomic_u32(swjdp, NVIC_DFSR, cortex_m3->nvic_dfsr);
170 if (retval != ERROR_OK)
171 return retval;
172 LOG_DEBUG(" NVIC_DFSR 0x%" PRIx32 "", cortex_m3->nvic_dfsr);
173
174 return ERROR_OK;
175 }
176
177 static int cortex_m3_single_step_core(struct target *target)
178 {
179 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
180 struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
181 uint32_t dhcsr_save;
182 int retval;
183
184 /* backup dhcsr reg */
185 dhcsr_save = cortex_m3->dcb_dhcsr;
186
187 /* Mask interrupts before clearing halt, if done already. This avoids
188 * Erratum 377497 (fixed in r1p0) where setting MASKINTS while clearing
189 * HALT can put the core into an unknown state.
190 */
191 if (!(cortex_m3->dcb_dhcsr & C_MASKINTS))
192 {
193 retval = mem_ap_write_atomic_u32(swjdp, DCB_DHCSR,
194 DBGKEY | C_MASKINTS | C_HALT | C_DEBUGEN);
195 if (retval != ERROR_OK)
196 return retval;
197 }
198 retval = mem_ap_write_atomic_u32(swjdp, DCB_DHCSR,
199 DBGKEY | C_MASKINTS | C_STEP | C_DEBUGEN);
200 if (retval != ERROR_OK)
201 return retval;
202 LOG_DEBUG(" ");
203
204 /* restore dhcsr reg */
205 cortex_m3->dcb_dhcsr = dhcsr_save;
206 cortex_m3_clear_halt(target);
207
208 return ERROR_OK;
209 }
210
211 static int cortex_m3_endreset_event(struct target *target)
212 {
213 int i;
214 int retval;
215 uint32_t dcb_demcr;
216 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
217 struct armv7m_common *armv7m = &cortex_m3->armv7m;
218 struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
219 struct cortex_m3_fp_comparator *fp_list = cortex_m3->fp_comparator_list;
220 struct cortex_m3_dwt_comparator *dwt_list = cortex_m3->dwt_comparator_list;
221
222 /* REVISIT The four debug monitor bits are currently ignored... */
223 retval = mem_ap_read_atomic_u32(swjdp, DCB_DEMCR, &dcb_demcr);
224 if (retval != ERROR_OK)
225 return retval;
226 LOG_DEBUG("DCB_DEMCR = 0x%8.8" PRIx32 "",dcb_demcr);
227
228 /* this register is used for emulated dcc channel */
229 retval = mem_ap_write_u32(swjdp, DCB_DCRDR, 0);
230 if (retval != ERROR_OK)
231 return retval;
232
233 /* Enable debug requests */
234 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
235 if (retval != ERROR_OK)
236 return retval;
237 if (!(cortex_m3->dcb_dhcsr & C_DEBUGEN))
238 {
239 retval = mem_ap_write_u32(swjdp, DCB_DHCSR, DBGKEY | C_DEBUGEN);
240 if (retval != ERROR_OK)
241 return retval;
242 }
243
244 /* clear any interrupt masking */
245 cortex_m3_write_debug_halt_mask(target, 0, C_MASKINTS);
246
247 /* Enable features controlled by ITM and DWT blocks, and catch only
248 * the vectors we were told to pay attention to.
249 *
250 * Target firmware is responsible for all fault handling policy
251 * choices *EXCEPT* explicitly scripted overrides like "vector_catch"
252 * or manual updates to the NVIC SHCSR and CCR registers.
253 */
254 retval = mem_ap_write_u32(swjdp, DCB_DEMCR, TRCENA | armv7m->demcr);
255 if (retval != ERROR_OK)
256 return retval;
257
258 /* Paranoia: evidently some (early?) chips don't preserve all the
259 * debug state (including FBP, DWT, etc) across reset...
260 */
261
262 /* Enable FPB */
263 retval = target_write_u32(target, FP_CTRL, 3);
264 if (retval != ERROR_OK)
265 return retval;
266
267 cortex_m3->fpb_enabled = 1;
268
269 /* Restore FPB registers */
270 for (i = 0; i < cortex_m3->fp_num_code + cortex_m3->fp_num_lit; i++)
271 {
272 retval = target_write_u32(target, fp_list[i].fpcr_address, fp_list[i].fpcr_value);
273 if (retval != ERROR_OK)
274 return retval;
275 }
276
277 /* Restore DWT registers */
278 for (i = 0; i < cortex_m3->dwt_num_comp; i++)
279 {
280 retval = target_write_u32(target, dwt_list[i].dwt_comparator_address + 0,
281 dwt_list[i].comp);
282 if (retval != ERROR_OK)
283 return retval;
284 retval = target_write_u32(target, dwt_list[i].dwt_comparator_address + 4,
285 dwt_list[i].mask);
286 if (retval != ERROR_OK)
287 return retval;
288 retval = target_write_u32(target, dwt_list[i].dwt_comparator_address + 8,
289 dwt_list[i].function);
290 if (retval != ERROR_OK)
291 return retval;
292 }
293 retval = dap_run(swjdp);
294 if (retval != ERROR_OK)
295 return retval;
296
297 register_cache_invalidate(cortex_m3->armv7m.core_cache);
298
299 /* make sure we have latest dhcsr flags */
300 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
301
302 return retval;
303 }
304
305 static int cortex_m3_examine_debug_reason(struct target *target)
306 {
307 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
308
309 /* THIS IS NOT GOOD, TODO - better logic for detection of debug state reason */
310 /* only check the debug reason if we don't know it already */
311
312 if ((target->debug_reason != DBG_REASON_DBGRQ)
313 && (target->debug_reason != DBG_REASON_SINGLESTEP))
314 {
315 if (cortex_m3->nvic_dfsr & DFSR_BKPT)
316 {
317 target->debug_reason = DBG_REASON_BREAKPOINT;
318 if (cortex_m3->nvic_dfsr & DFSR_DWTTRAP)
319 target->debug_reason = DBG_REASON_WPTANDBKPT;
320 }
321 else if (cortex_m3->nvic_dfsr & DFSR_DWTTRAP)
322 target->debug_reason = DBG_REASON_WATCHPOINT;
323 else if (cortex_m3->nvic_dfsr & DFSR_VCATCH)
324 target->debug_reason = DBG_REASON_BREAKPOINT;
325 else /* EXTERNAL, HALTED */
326 target->debug_reason = DBG_REASON_UNDEFINED;
327 }
328
329 return ERROR_OK;
330 }
331
332 static int cortex_m3_examine_exception_reason(struct target *target)
333 {
334 uint32_t shcsr, except_sr, cfsr = -1, except_ar = -1;
335 struct armv7m_common *armv7m = target_to_armv7m(target);
336 struct adiv5_dap *swjdp = &armv7m->dap;
337 int retval;
338
339 retval = mem_ap_read_u32(swjdp, NVIC_SHCSR, &shcsr);
340 if (retval != ERROR_OK)
341 return retval;
342 switch (armv7m->exception_number)
343 {
344 case 2: /* NMI */
345 break;
346 case 3: /* Hard Fault */
347 retval = mem_ap_read_atomic_u32(swjdp, NVIC_HFSR, &except_sr);
348 if (retval != ERROR_OK)
349 return retval;
350 if (except_sr & 0x40000000)
351 {
352 retval = mem_ap_read_u32(swjdp, NVIC_CFSR, &cfsr);
353 if (retval != ERROR_OK)
354 return retval;
355 }
356 break;
357 case 4: /* Memory Management */
358 retval = mem_ap_read_u32(swjdp, NVIC_CFSR, &except_sr);
359 if (retval != ERROR_OK)
360 return retval;
361 retval = mem_ap_read_u32(swjdp, NVIC_MMFAR, &except_ar);
362 if (retval != ERROR_OK)
363 return retval;
364 break;
365 case 5: /* Bus Fault */
366 retval = mem_ap_read_u32(swjdp, NVIC_CFSR, &except_sr);
367 if (retval != ERROR_OK)
368 return retval;
369 retval = mem_ap_read_u32(swjdp, NVIC_BFAR, &except_ar);
370 if (retval != ERROR_OK)
371 return retval;
372 break;
373 case 6: /* Usage Fault */
374 retval = mem_ap_read_u32(swjdp, NVIC_CFSR, &except_sr);
375 if (retval != ERROR_OK)
376 return retval;
377 break;
378 case 11: /* SVCall */
379 break;
380 case 12: /* Debug Monitor */
381 retval = mem_ap_read_u32(swjdp, NVIC_DFSR, &except_sr);
382 if (retval != ERROR_OK)
383 return retval;
384 break;
385 case 14: /* PendSV */
386 break;
387 case 15: /* SysTick */
388 break;
389 default:
390 except_sr = 0;
391 break;
392 }
393 retval = dap_run(swjdp);
394 if (retval == ERROR_OK)
395 LOG_DEBUG("%s SHCSR 0x%" PRIx32 ", SR 0x%" PRIx32
396 ", CFSR 0x%" PRIx32 ", AR 0x%" PRIx32,
397 armv7m_exception_string(armv7m->exception_number),
398 shcsr, except_sr, cfsr, except_ar);
399 return retval;
400 }
401
402 /* PSP is used in some thread modes */
403 static const int armv7m_psp_reg_map[17] = {
404 ARMV7M_R0, ARMV7M_R1, ARMV7M_R2, ARMV7M_R3,
405 ARMV7M_R4, ARMV7M_R5, ARMV7M_R6, ARMV7M_R7,
406 ARMV7M_R8, ARMV7M_R9, ARMV7M_R10, ARMV7M_R11,
407 ARMV7M_R12, ARMV7M_PSP, ARMV7M_R14, ARMV7M_PC,
408 ARMV7M_xPSR,
409 };
410
411 /* MSP is used in handler and some thread modes */
412 static const int armv7m_msp_reg_map[17] = {
413 ARMV7M_R0, ARMV7M_R1, ARMV7M_R2, ARMV7M_R3,
414 ARMV7M_R4, ARMV7M_R5, ARMV7M_R6, ARMV7M_R7,
415 ARMV7M_R8, ARMV7M_R9, ARMV7M_R10, ARMV7M_R11,
416 ARMV7M_R12, ARMV7M_MSP, ARMV7M_R14, ARMV7M_PC,
417 ARMV7M_xPSR,
418 };
419
420 static int cortex_m3_debug_entry(struct target *target)
421 {
422 int i;
423 uint32_t xPSR;
424 int retval;
425 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
426 struct armv7m_common *armv7m = &cortex_m3->armv7m;
427 struct arm *arm = &armv7m->arm;
428 struct adiv5_dap *swjdp = &armv7m->dap;
429 struct reg *r;
430
431 LOG_DEBUG(" ");
432
433 cortex_m3_clear_halt(target);
434 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
435 if (retval != ERROR_OK)
436 return retval;
437
438 if ((retval = armv7m->examine_debug_reason(target)) != ERROR_OK)
439 return retval;
440
441 /* Examine target state and mode */
442 /* First load register acessible through core debug port*/
443 int num_regs = armv7m->core_cache->num_regs;
444
445 for (i = 0; i < num_regs; i++)
446 {
447 if (!armv7m->core_cache->reg_list[i].valid)
448 armv7m->read_core_reg(target, i);
449 }
450
451 r = armv7m->core_cache->reg_list + ARMV7M_xPSR;
452 xPSR = buf_get_u32(r->value, 0, 32);
453
454 #ifdef ARMV7_GDB_HACKS
455 /* FIXME this breaks on scan chains with more than one Cortex-M3.
456 * Instead, each CM3 should have its own dummy value...
457 */
458 /* copy real xpsr reg for gdb, setting thumb bit */
459 buf_set_u32(armv7m_gdb_dummy_cpsr_value, 0, 32, xPSR);
460 buf_set_u32(armv7m_gdb_dummy_cpsr_value, 5, 1, 1);
461 armv7m_gdb_dummy_cpsr_reg.valid = r->valid;
462 armv7m_gdb_dummy_cpsr_reg.dirty = r->dirty;
463 #endif
464
465 /* For IT instructions xPSR must be reloaded on resume and clear on debug exec */
466 if (xPSR & 0xf00)
467 {
468 r->dirty = r->valid;
469 cortex_m3_store_core_reg_u32(target, ARMV7M_REGISTER_CORE_GP, 16, xPSR &~ 0xff);
470 }
471
472 /* Are we in an exception handler */
473 if (xPSR & 0x1FF)
474 {
475 armv7m->core_mode = ARMV7M_MODE_HANDLER;
476 armv7m->exception_number = (xPSR & 0x1FF);
477
478 arm->core_mode = ARM_MODE_HANDLER;
479 arm->map = armv7m_msp_reg_map;
480 }
481 else
482 {
483 unsigned control = buf_get_u32(armv7m->core_cache
484 ->reg_list[ARMV7M_CONTROL].value, 0, 2);
485
486 /* is this thread privileged? */
487 armv7m->core_mode = control & 1;
488 arm->core_mode = armv7m->core_mode
489 ? ARM_MODE_USER_THREAD
490 : ARM_MODE_THREAD;
491
492 /* which stack is it using? */
493 if (control & 2)
494 arm->map = armv7m_psp_reg_map;
495 else
496 arm->map = armv7m_msp_reg_map;
497
498 armv7m->exception_number = 0;
499 }
500
501 if (armv7m->exception_number)
502 {
503 cortex_m3_examine_exception_reason(target);
504 }
505
506 LOG_DEBUG("entered debug state in core mode: %s at PC 0x%" PRIx32 ", target->state: %s",
507 armv7m_mode_strings[armv7m->core_mode],
508 *(uint32_t*)(arm->pc->value),
509 target_state_name(target));
510
511 if (armv7m->post_debug_entry)
512 {
513 retval = armv7m->post_debug_entry(target);
514 if (retval != ERROR_OK)
515 return retval;
516 }
517
518 return ERROR_OK;
519 }
520
521 static int cortex_m3_poll(struct target *target)
522 {
523 int retval;
524 enum target_state prev_target_state = target->state;
525 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
526 struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
527
528 /* Read from Debug Halting Control and Status Register */
529 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
530 if (retval != ERROR_OK)
531 {
532 target->state = TARGET_UNKNOWN;
533 return retval;
534 }
535
536 /* Recover from lockup. See ARMv7-M architecture spec,
537 * section B1.5.15 "Unrecoverable exception cases".
538 *
539 * REVISIT Is there a better way to report and handle this?
540 */
541 if (cortex_m3->dcb_dhcsr & S_LOCKUP) {
542 LOG_WARNING("%s -- clearing lockup after double fault",
543 target_name(target));
544 cortex_m3_write_debug_halt_mask(target, C_HALT, 0);
545 target->debug_reason = DBG_REASON_DBGRQ;
546
547 /* refresh status bits */
548 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
549 if (retval != ERROR_OK)
550 return retval;
551 }
552
553 if (cortex_m3->dcb_dhcsr & S_RESET_ST)
554 {
555 /* check if still in reset */
556 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
557 if (retval != ERROR_OK)
558 return retval;
559
560 if (cortex_m3->dcb_dhcsr & S_RESET_ST)
561 {
562 target->state = TARGET_RESET;
563 return ERROR_OK;
564 }
565 }
566
567 if (target->state == TARGET_RESET)
568 {
569 /* Cannot switch context while running so endreset is
570 * called with target->state == TARGET_RESET
571 */
572 LOG_DEBUG("Exit from reset with dcb_dhcsr 0x%" PRIx32,
573 cortex_m3->dcb_dhcsr);
574 cortex_m3_endreset_event(target);
575 target->state = TARGET_RUNNING;
576 prev_target_state = TARGET_RUNNING;
577 }
578
579 if (cortex_m3->dcb_dhcsr & S_HALT)
580 {
581 target->state = TARGET_HALTED;
582
583 if ((prev_target_state == TARGET_RUNNING) || (prev_target_state == TARGET_RESET))
584 {
585 if ((retval = cortex_m3_debug_entry(target)) != ERROR_OK)
586 return retval;
587
588 if (arm_semihosting(target, &retval) != 0)
589 return retval;
590
591 target_call_event_callbacks(target, TARGET_EVENT_HALTED);
592 }
593 if (prev_target_state == TARGET_DEBUG_RUNNING)
594 {
595 LOG_DEBUG(" ");
596 if ((retval = cortex_m3_debug_entry(target)) != ERROR_OK)
597 return retval;
598
599 target_call_event_callbacks(target, TARGET_EVENT_DEBUG_HALTED);
600 }
601 }
602
603 /* REVISIT when S_SLEEP is set, it's in a Sleep or DeepSleep state.
604 * How best to model low power modes?
605 */
606
607 if (target->state == TARGET_UNKNOWN)
608 {
609 /* check if processor is retiring instructions */
610 if (cortex_m3->dcb_dhcsr & S_RETIRE_ST)
611 {
612 target->state = TARGET_RUNNING;
613 return ERROR_OK;
614 }
615 }
616
617 return ERROR_OK;
618 }
619
620 static int cortex_m3_halt(struct target *target)
621 {
622 LOG_DEBUG("target->state: %s",
623 target_state_name(target));
624
625 if (target->state == TARGET_HALTED)
626 {
627 LOG_DEBUG("target was already halted");
628 return ERROR_OK;
629 }
630
631 if (target->state == TARGET_UNKNOWN)
632 {
633 LOG_WARNING("target was in unknown state when halt was requested");
634 }
635
636 if (target->state == TARGET_RESET)
637 {
638 if ((jtag_get_reset_config() & RESET_SRST_PULLS_TRST) && jtag_get_srst())
639 {
640 LOG_ERROR("can't request a halt while in reset if nSRST pulls nTRST");
641 return ERROR_TARGET_FAILURE;
642 }
643 else
644 {
645 /* we came here in a reset_halt or reset_init sequence
646 * debug entry was already prepared in cortex_m3_prepare_reset_halt()
647 */
648 target->debug_reason = DBG_REASON_DBGRQ;
649
650 return ERROR_OK;
651 }
652 }
653
654 /* Write to Debug Halting Control and Status Register */
655 cortex_m3_write_debug_halt_mask(target, C_HALT, 0);
656
657 target->debug_reason = DBG_REASON_DBGRQ;
658
659 return ERROR_OK;
660 }
661
662 static int cortex_m3_soft_reset_halt(struct target *target)
663 {
664 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
665 struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
666 uint32_t dcb_dhcsr = 0;
667 int retval, timeout = 0;
668
669 /* Enter debug state on reset; restore DEMCR in endreset_event() */
670 retval = mem_ap_write_u32(swjdp, DCB_DEMCR,
671 TRCENA | VC_HARDERR | VC_BUSERR | VC_CORERESET);
672 if (retval != ERROR_OK)
673 return retval;
674
675 /* Request a core-only reset */
676 retval = mem_ap_write_atomic_u32(swjdp, NVIC_AIRCR,
677 AIRCR_VECTKEY | AIRCR_VECTRESET);
678 if (retval != ERROR_OK)
679 return retval;
680 target->state = TARGET_RESET;
681
682 /* registers are now invalid */
683 register_cache_invalidate(cortex_m3->armv7m.core_cache);
684
685 while (timeout < 100)
686 {
687 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &dcb_dhcsr);
688 if (retval == ERROR_OK)
689 {
690 retval = mem_ap_read_atomic_u32(swjdp, NVIC_DFSR,
691 &cortex_m3->nvic_dfsr);
692 if (retval != ERROR_OK)
693 return retval;
694 if ((dcb_dhcsr & S_HALT)
695 && (cortex_m3->nvic_dfsr & DFSR_VCATCH))
696 {
697 LOG_DEBUG("system reset-halted, DHCSR 0x%08x, "
698 "DFSR 0x%08x",
699 (unsigned) dcb_dhcsr,
700 (unsigned) cortex_m3->nvic_dfsr);
701 cortex_m3_poll(target);
702 /* FIXME restore user's vector catch config */
703 return ERROR_OK;
704 }
705 else
706 LOG_DEBUG("waiting for system reset-halt, "
707 "DHCSR 0x%08x, %d ms",
708 (unsigned) dcb_dhcsr, timeout);
709 }
710 timeout++;
711 alive_sleep(1);
712 }
713
714 return ERROR_OK;
715 }
716
717 static void cortex_m3_enable_breakpoints(struct target *target)
718 {
719 struct breakpoint *breakpoint = target->breakpoints;
720
721 /* set any pending breakpoints */
722 while (breakpoint)
723 {
724 if (!breakpoint->set)
725 cortex_m3_set_breakpoint(target, breakpoint);
726 breakpoint = breakpoint->next;
727 }
728 }
729
730 static int cortex_m3_resume(struct target *target, int current,
731 uint32_t address, int handle_breakpoints, int debug_execution)
732 {
733 struct armv7m_common *armv7m = target_to_armv7m(target);
734 struct breakpoint *breakpoint = NULL;
735 uint32_t resume_pc;
736 struct reg *r;
737
738 if (target->state != TARGET_HALTED)
739 {
740 LOG_WARNING("target not halted");
741 return ERROR_TARGET_NOT_HALTED;
742 }
743
744 if (!debug_execution)
745 {
746 target_free_all_working_areas(target);
747 cortex_m3_enable_breakpoints(target);
748 cortex_m3_enable_watchpoints(target);
749 }
750
751 if (debug_execution)
752 {
753 r = armv7m->core_cache->reg_list + ARMV7M_PRIMASK;
754
755 /* Disable interrupts */
756 /* We disable interrupts in the PRIMASK register instead of
757 * masking with C_MASKINTS. This is probably the same issue
758 * as Cortex-M3 Erratum 377493 (fixed in r1p0): C_MASKINTS
759 * in parallel with disabled interrupts can cause local faults
760 * to not be taken.
761 *
762 * REVISIT this clearly breaks non-debug execution, since the
763 * PRIMASK register state isn't saved/restored... workaround
764 * by never resuming app code after debug execution.
765 */
766 buf_set_u32(r->value, 0, 1, 1);
767 r->dirty = true;
768 r->valid = true;
769
770 /* Make sure we are in Thumb mode */
771 r = armv7m->core_cache->reg_list + ARMV7M_xPSR;
772 buf_set_u32(r->value, 24, 1, 1);
773 r->dirty = true;
774 r->valid = true;
775 }
776
777 /* current = 1: continue on current pc, otherwise continue at <address> */
778 r = armv7m->arm.pc;
779 if (!current)
780 {
781 buf_set_u32(r->value, 0, 32, address);
782 r->dirty = true;
783 r->valid = true;
784 }
785
786 /* if we halted last time due to a bkpt instruction
787 * then we have to manually step over it, otherwise
788 * the core will break again */
789
790 if (!breakpoint_find(target, buf_get_u32(r->value, 0, 32))
791 && !debug_execution)
792 {
793 armv7m_maybe_skip_bkpt_inst(target, NULL);
794 }
795
796 resume_pc = buf_get_u32(r->value, 0, 32);
797
798 armv7m_restore_context(target);
799
800 /* the front-end may request us not to handle breakpoints */
801 if (handle_breakpoints)
802 {
803 /* Single step past breakpoint at current address */
804 if ((breakpoint = breakpoint_find(target, resume_pc)))
805 {
806 LOG_DEBUG("unset breakpoint at 0x%8.8" PRIx32 " (ID: %d)",
807 breakpoint->address,
808 breakpoint->unique_id);
809 cortex_m3_unset_breakpoint(target, breakpoint);
810 cortex_m3_single_step_core(target);
811 cortex_m3_set_breakpoint(target, breakpoint);
812 }
813 }
814
815 /* Restart core */
816 cortex_m3_write_debug_halt_mask(target, 0, C_HALT);
817
818 target->debug_reason = DBG_REASON_NOTHALTED;
819
820 /* registers are now invalid */
821 register_cache_invalidate(armv7m->core_cache);
822
823 if (!debug_execution)
824 {
825 target->state = TARGET_RUNNING;
826 target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
827 LOG_DEBUG("target resumed at 0x%" PRIx32 "", resume_pc);
828 }
829 else
830 {
831 target->state = TARGET_DEBUG_RUNNING;
832 target_call_event_callbacks(target, TARGET_EVENT_DEBUG_RESUMED);
833 LOG_DEBUG("target debug resumed at 0x%" PRIx32 "", resume_pc);
834 }
835
836 return ERROR_OK;
837 }
838
839 /* int irqstepcount = 0; */
840 static int cortex_m3_step(struct target *target, int current,
841 uint32_t address, int handle_breakpoints)
842 {
843 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
844 struct armv7m_common *armv7m = &cortex_m3->armv7m;
845 struct adiv5_dap *swjdp = &armv7m->dap;
846 struct breakpoint *breakpoint = NULL;
847 struct reg *pc = armv7m->arm.pc;
848 bool bkpt_inst_found = false;
849
850 if (target->state != TARGET_HALTED)
851 {
852 LOG_WARNING("target not halted");
853 return ERROR_TARGET_NOT_HALTED;
854 }
855
856 /* current = 1: continue on current pc, otherwise continue at <address> */
857 if (!current)
858 buf_set_u32(pc->value, 0, 32, address);
859
860 /* the front-end may request us not to handle breakpoints */
861 if (handle_breakpoints) {
862 breakpoint = breakpoint_find(target,
863 buf_get_u32(pc->value, 0, 32));
864 if (breakpoint)
865 cortex_m3_unset_breakpoint(target, breakpoint);
866 }
867
868 armv7m_maybe_skip_bkpt_inst(target, &bkpt_inst_found);
869
870 target->debug_reason = DBG_REASON_SINGLESTEP;
871
872 armv7m_restore_context(target);
873
874 target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
875
876 /* if no bkpt instruction is found at pc then we can perform
877 * a normal step, otherwise we have to manually step over the bkpt
878 * instruction - as such simulate a step */
879 if (bkpt_inst_found == false)
880 {
881 /* set step and clear halt */
882 cortex_m3_write_debug_halt_mask(target, C_STEP, C_HALT);
883 }
884
885 int retval;
886 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
887 if (retval != ERROR_OK)
888 return retval;
889
890 /* registers are now invalid */
891 register_cache_invalidate(cortex_m3->armv7m.core_cache);
892
893 if (breakpoint)
894 cortex_m3_set_breakpoint(target, breakpoint);
895
896 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
897 " nvic_icsr = 0x%" PRIx32,
898 cortex_m3->dcb_dhcsr, cortex_m3->nvic_icsr);
899
900 retval = cortex_m3_debug_entry(target);
901 if (retval != ERROR_OK)
902 return retval;
903 target_call_event_callbacks(target, TARGET_EVENT_HALTED);
904
905 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
906 " nvic_icsr = 0x%" PRIx32,
907 cortex_m3->dcb_dhcsr, cortex_m3->nvic_icsr);
908
909 return ERROR_OK;
910 }
911
912 static int cortex_m3_assert_reset(struct target *target)
913 {
914 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
915 struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
916 enum cortex_m3_soft_reset_config reset_config = cortex_m3->soft_reset_config;
917
918 LOG_DEBUG("target->state: %s",
919 target_state_name(target));
920
921 enum reset_types jtag_reset_config = jtag_get_reset_config();
922
923 /*
924 * We can reset Cortex-M3 targets using just the NVIC without
925 * requiring SRST, getting a SoC reset (or a core-only reset)
926 * instead of a system reset.
927 */
928 if (!(jtag_reset_config & RESET_HAS_SRST) &&
929 (cortex_m3->soft_reset_config == CORTEX_M3_RESET_SRST)) {
930 reset_config = CORTEX_M3_RESET_VECTRESET;
931 }
932
933 /* Enable debug requests */
934 int retval;
935 retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
936 if (retval != ERROR_OK)
937 return retval;
938 if (!(cortex_m3->dcb_dhcsr & C_DEBUGEN))
939 {
940 retval = mem_ap_write_u32(swjdp, DCB_DHCSR, DBGKEY | C_DEBUGEN);
941 if (retval != ERROR_OK)
942 return retval;
943 }
944
945 retval = mem_ap_write_u32(swjdp, DCB_DCRDR, 0);
946 if (retval != ERROR_OK)
947 return retval;
948
949 if (!target->reset_halt)
950 {
951 /* Set/Clear C_MASKINTS in a separate operation */
952 if (cortex_m3->dcb_dhcsr & C_MASKINTS)
953 {
954 retval = mem_ap_write_atomic_u32(swjdp, DCB_DHCSR,
955 DBGKEY | C_DEBUGEN | C_HALT);
956 if (retval != ERROR_OK)
957 return retval;
958 }
959
960 /* clear any debug flags before resuming */
961 cortex_m3_clear_halt(target);
962
963 /* clear C_HALT in dhcsr reg */
964 cortex_m3_write_debug_halt_mask(target, 0, C_HALT);
965 }
966 else
967 {
968 /* Halt in debug on reset; endreset_event() restores DEMCR.
969 *
970 * REVISIT catching BUSERR presumably helps to defend against
971 * bad vector table entries. Should this include MMERR or
972 * other flags too?
973 */
974 retval = mem_ap_write_atomic_u32(swjdp, DCB_DEMCR,
975 TRCENA | VC_HARDERR | VC_BUSERR | VC_CORERESET);
976 if (retval != ERROR_OK)
977 return retval;
978 }
979
980 if (reset_config == CORTEX_M3_RESET_SRST)
981 {
982 /* default to asserting srst */
983 if (jtag_reset_config & RESET_SRST_PULLS_TRST)
984 {
985 jtag_add_reset(1, 1);
986 }
987 else
988 {
989 jtag_add_reset(0, 1);
990 }
991 }
992 else
993 {
994 /* Use a standard Cortex-M3 software reset mechanism.
995 * We default to using VECRESET as it is supported on all current cores.
996 * This has the disadvantage of not resetting the peripherals, so a
997 * reset-init event handler is needed to perform any peripheral resets.
998 */
999 retval = mem_ap_write_atomic_u32(swjdp, NVIC_AIRCR,
1000 AIRCR_VECTKEY | ((reset_config == CORTEX_M3_RESET_SYSRESETREQ)
1001 ? AIRCR_SYSRESETREQ : AIRCR_VECTRESET));
1002 if (retval != ERROR_OK)
1003 return retval;
1004
1005 LOG_DEBUG("Using Cortex-M3 %s", (reset_config == CORTEX_M3_RESET_SYSRESETREQ)
1006 ? "SYSRESETREQ" : "VECTRESET");
1007
1008 if (reset_config == CORTEX_M3_RESET_VECTRESET) {
1009 LOG_WARNING("Only resetting the Cortex-M3 core, use a reset-init event "
1010 "handler to reset any peripherals");
1011 }
1012
1013 {
1014 /* I do not know why this is necessary, but it
1015 * fixes strange effects (step/resume cause NMI
1016 * after reset) on LM3S6918 -- Michael Schwingen
1017 */
1018 uint32_t tmp;
1019 retval = mem_ap_read_atomic_u32(swjdp, NVIC_AIRCR, &tmp);
1020 if (retval != ERROR_OK)
1021 return retval;
1022 }
1023 }
1024
1025 target->state = TARGET_RESET;
1026 jtag_add_sleep(50000);
1027
1028 register_cache_invalidate(cortex_m3->armv7m.core_cache);
1029
1030 if (target->reset_halt)
1031 {
1032 if ((retval = target_halt(target)) != ERROR_OK)
1033 return retval;
1034 }
1035
1036 return ERROR_OK;
1037 }
1038
1039 static int cortex_m3_deassert_reset(struct target *target)
1040 {
1041 LOG_DEBUG("target->state: %s",
1042 target_state_name(target));
1043
1044 /* deassert reset lines */
1045 jtag_add_reset(0, 0);
1046
1047 return ERROR_OK;
1048 }
1049
1050 static int
1051 cortex_m3_set_breakpoint(struct target *target, struct breakpoint *breakpoint)
1052 {
1053 int retval;
1054 int fp_num = 0;
1055 uint32_t hilo;
1056 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
1057 struct cortex_m3_fp_comparator *comparator_list = cortex_m3->fp_comparator_list;
1058
1059 if (breakpoint->set)
1060 {
1061 LOG_WARNING("breakpoint (BPID: %d) already set", breakpoint->unique_id);
1062 return ERROR_OK;
1063 }
1064
1065 if (cortex_m3->auto_bp_type)
1066 {
1067 breakpoint->type = (breakpoint->address < 0x20000000) ? BKPT_HARD : BKPT_SOFT;
1068 }
1069
1070 if (breakpoint->type == BKPT_HARD)
1071 {
1072 while (comparator_list[fp_num].used && (fp_num < cortex_m3->fp_num_code))
1073 fp_num++;
1074 if (fp_num >= cortex_m3->fp_num_code)
1075 {
1076 LOG_ERROR("Can not find free FPB Comparator!");
1077 return ERROR_FAIL;
1078 }
1079 breakpoint->set = fp_num + 1;
1080 hilo = (breakpoint->address & 0x2) ? FPCR_REPLACE_BKPT_HIGH : FPCR_REPLACE_BKPT_LOW;
1081 comparator_list[fp_num].used = 1;
1082 comparator_list[fp_num].fpcr_value = (breakpoint->address & 0x1FFFFFFC) | hilo | 1;
1083 target_write_u32(target, comparator_list[fp_num].fpcr_address, comparator_list[fp_num].fpcr_value);
1084 LOG_DEBUG("fpc_num %i fpcr_value 0x%" PRIx32 "", fp_num, comparator_list[fp_num].fpcr_value);
1085 if (!cortex_m3->fpb_enabled)
1086 {
1087 LOG_DEBUG("FPB wasn't enabled, do it now");
1088 target_write_u32(target, FP_CTRL, 3);
1089 }
1090 }
1091 else if (breakpoint->type == BKPT_SOFT)
1092 {
1093 uint8_t code[4];
1094
1095 /* NOTE: on ARMv6-M and ARMv7-M, BKPT(0xab) is used for
1096 * semihosting; don't use that. Otherwise the BKPT
1097 * parameter is arbitrary.
1098 */
1099 buf_set_u32(code, 0, 32, ARMV5_T_BKPT(0x11));
1100 retval = target_read_memory(target,
1101 breakpoint->address & 0xFFFFFFFE,
1102 breakpoint->length, 1,
1103 breakpoint->orig_instr);
1104 if (retval != ERROR_OK)
1105 return retval;
1106 retval = target_write_memory(target,
1107 breakpoint->address & 0xFFFFFFFE,
1108 breakpoint->length, 1,
1109 code);
1110 if (retval != ERROR_OK)
1111 return retval;
1112 breakpoint->set = true;
1113 }
1114
1115 LOG_DEBUG("BPID: %d, Type: %d, Address: 0x%08" PRIx32 " Length: %d (set=%d)",
1116 breakpoint->unique_id,
1117 (int)(breakpoint->type),
1118 breakpoint->address,
1119 breakpoint->length,
1120 breakpoint->set);
1121
1122 return ERROR_OK;
1123 }
1124
1125 static int
1126 cortex_m3_unset_breakpoint(struct target *target, struct breakpoint *breakpoint)
1127 {
1128 int retval;
1129 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
1130 struct cortex_m3_fp_comparator * comparator_list = cortex_m3->fp_comparator_list;
1131
1132 if (!breakpoint->set)
1133 {
1134 LOG_WARNING("breakpoint not set");
1135 return ERROR_OK;
1136 }
1137
1138 LOG_DEBUG("BPID: %d, Type: %d, Address: 0x%08" PRIx32 " Length: %d (set=%d)",
1139 breakpoint->unique_id,
1140 (int)(breakpoint->type),
1141 breakpoint->address,
1142 breakpoint->length,
1143 breakpoint->set);
1144
1145 if (breakpoint->type == BKPT_HARD)
1146 {
1147 int fp_num = breakpoint->set - 1;
1148 if ((fp_num < 0) || (fp_num >= cortex_m3->fp_num_code))
1149 {
1150 LOG_DEBUG("Invalid FP Comparator number in breakpoint");
1151 return ERROR_OK;
1152 }
1153 comparator_list[fp_num].used = 0;
1154 comparator_list[fp_num].fpcr_value = 0;
1155 target_write_u32(target, comparator_list[fp_num].fpcr_address, comparator_list[fp_num].fpcr_value);
1156 }
1157 else
1158 {
1159 /* restore original instruction (kept in target endianness) */
1160 if (breakpoint->length == 4)
1161 {
1162 if ((retval = target_write_memory(target, breakpoint->address & 0xFFFFFFFE, 4, 1, breakpoint->orig_instr)) != ERROR_OK)
1163 {
1164 return retval;
1165 }
1166 }
1167 else
1168 {
1169 if ((retval = target_write_memory(target, breakpoint->address & 0xFFFFFFFE, 2, 1, breakpoint->orig_instr)) != ERROR_OK)
1170 {
1171 return retval;
1172 }
1173 }
1174 }
1175 breakpoint->set = false;
1176
1177 return ERROR_OK;
1178 }
1179
1180 static int
1181 cortex_m3_add_breakpoint(struct target *target, struct breakpoint *breakpoint)
1182 {
1183 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
1184
1185 if (cortex_m3->auto_bp_type)
1186 {
1187 breakpoint->type = (breakpoint->address < 0x20000000) ? BKPT_HARD : BKPT_SOFT;
1188 #ifdef ARMV7_GDB_HACKS
1189 if (breakpoint->length != 2) {
1190 /* XXX Hack: Replace all breakpoints with length != 2 with
1191 * a hardware breakpoint. */
1192 breakpoint->type = BKPT_HARD;
1193 breakpoint->length = 2;
1194 }
1195 #endif
1196 }
1197
1198 if ((breakpoint->type == BKPT_HARD) && (breakpoint->address >= 0x20000000))
1199 {
1200 LOG_INFO("flash patch comparator requested outside code memory region");
1201 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1202 }
1203
1204 if ((breakpoint->type == BKPT_SOFT) && (breakpoint->address < 0x20000000))
1205 {
1206 LOG_INFO("soft breakpoint requested in code (flash) memory region");
1207 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1208 }
1209
1210 if ((breakpoint->type == BKPT_HARD) && (cortex_m3->fp_code_available < 1))
1211 {
1212 LOG_INFO("no flash patch comparator unit available for hardware breakpoint");
1213 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1214 }
1215
1216 if ((breakpoint->length != 2))
1217 {
1218 LOG_INFO("only breakpoints of two bytes length supported");
1219 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1220 }
1221
1222 if (breakpoint->type == BKPT_HARD)
1223 cortex_m3->fp_code_available--;
1224
1225 return cortex_m3_set_breakpoint(target, breakpoint);
1226 }
1227
1228 static int
1229 cortex_m3_remove_breakpoint(struct target *target, struct breakpoint *breakpoint)
1230 {
1231 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
1232
1233 /* REVISIT why check? FBP can be updated with core running ... */
1234 if (target->state != TARGET_HALTED)
1235 {
1236 LOG_WARNING("target not halted");
1237 return ERROR_TARGET_NOT_HALTED;
1238 }
1239
1240 if (cortex_m3->auto_bp_type)
1241 {
1242 breakpoint->type = (breakpoint->address < 0x20000000) ? BKPT_HARD : BKPT_SOFT;
1243 }
1244
1245 if (breakpoint->set)
1246 {
1247 cortex_m3_unset_breakpoint(target, breakpoint);
1248 }
1249
1250 if (breakpoint->type == BKPT_HARD)
1251 cortex_m3->fp_code_available++;
1252
1253 return ERROR_OK;
1254 }
1255
1256 static int
1257 cortex_m3_set_watchpoint(struct target *target, struct watchpoint *watchpoint)
1258 {
1259 int dwt_num = 0;
1260 uint32_t mask, temp;
1261 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
1262
1263 /* watchpoint params were validated earlier */
1264 mask = 0;
1265 temp = watchpoint->length;
1266 while (temp) {
1267 temp >>= 1;
1268 mask++;
1269 }
1270 mask--;
1271
1272 /* REVISIT Don't fully trust these "not used" records ... users
1273 * may set up breakpoints by hand, e.g. dual-address data value
1274 * watchpoint using comparator #1; comparator #0 matching cycle
1275 * count; send data trace info through ITM and TPIU; etc
1276 */
1277 struct cortex_m3_dwt_comparator *comparator;
1278
1279 for (comparator = cortex_m3->dwt_comparator_list;
1280 comparator->used && dwt_num < cortex_m3->dwt_num_comp;
1281 comparator++, dwt_num++)
1282 continue;
1283 if (dwt_num >= cortex_m3->dwt_num_comp)
1284 {
1285 LOG_ERROR("Can not find free DWT Comparator");
1286 return ERROR_FAIL;
1287 }
1288 comparator->used = 1;
1289 watchpoint->set = dwt_num + 1;
1290
1291 comparator->comp = watchpoint->address;
1292 target_write_u32(target, comparator->dwt_comparator_address + 0,
1293 comparator->comp);
1294
1295 comparator->mask = mask;
1296 target_write_u32(target, comparator->dwt_comparator_address + 4,
1297 comparator->mask);
1298
1299 switch (watchpoint->rw) {
1300 case WPT_READ:
1301 comparator->function = 5;
1302 break;
1303 case WPT_WRITE:
1304 comparator->function = 6;
1305 break;
1306 case WPT_ACCESS:
1307 comparator->function = 7;
1308 break;
1309 }
1310 target_write_u32(target, comparator->dwt_comparator_address + 8,
1311 comparator->function);
1312
1313 LOG_DEBUG("Watchpoint (ID %d) DWT%d 0x%08x 0x%x 0x%05x",
1314 watchpoint->unique_id, dwt_num,
1315 (unsigned) comparator->comp,
1316 (unsigned) comparator->mask,
1317 (unsigned) comparator->function);
1318 return ERROR_OK;
1319 }
1320
1321 static int
1322 cortex_m3_unset_watchpoint(struct target *target, struct watchpoint *watchpoint)
1323 {
1324 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
1325 struct cortex_m3_dwt_comparator *comparator;
1326 int dwt_num;
1327
1328 if (!watchpoint->set)
1329 {
1330 LOG_WARNING("watchpoint (wpid: %d) not set",
1331 watchpoint->unique_id);
1332 return ERROR_OK;
1333 }
1334
1335 dwt_num = watchpoint->set - 1;
1336
1337 LOG_DEBUG("Watchpoint (ID %d) DWT%d address: 0x%08x clear",
1338 watchpoint->unique_id, dwt_num,
1339 (unsigned) watchpoint->address);
1340
1341 if ((dwt_num < 0) || (dwt_num >= cortex_m3->dwt_num_comp))
1342 {
1343 LOG_DEBUG("Invalid DWT Comparator number in watchpoint");
1344 return ERROR_OK;
1345 }
1346
1347 comparator = cortex_m3->dwt_comparator_list + dwt_num;
1348 comparator->used = 0;
1349 comparator->function = 0;
1350 target_write_u32(target, comparator->dwt_comparator_address + 8,
1351 comparator->function);
1352
1353 watchpoint->set = false;
1354
1355 return ERROR_OK;
1356 }
1357
1358 static int
1359 cortex_m3_add_watchpoint(struct target *target, struct watchpoint *watchpoint)
1360 {
1361 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
1362
1363 if (cortex_m3->dwt_comp_available < 1)
1364 {
1365 LOG_DEBUG("no comparators?");
1366 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1367 }
1368
1369 /* hardware doesn't support data value masking */
1370 if (watchpoint->mask != ~(uint32_t)0) {
1371 LOG_DEBUG("watchpoint value masks not supported");
1372 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1373 }
1374
1375 /* hardware allows address masks of up to 32K */
1376 unsigned mask;
1377
1378 for (mask = 0; mask < 16; mask++) {
1379 if ((1u << mask) == watchpoint->length)
1380 break;
1381 }
1382 if (mask == 16) {
1383 LOG_DEBUG("unsupported watchpoint length");
1384 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1385 }
1386 if (watchpoint->address & ((1 << mask) - 1)) {
1387 LOG_DEBUG("watchpoint address is unaligned");
1388 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1389 }
1390
1391 /* Caller doesn't seem to be able to describe watching for data
1392 * values of zero; that flags "no value".
1393 *
1394 * REVISIT This DWT may well be able to watch for specific data
1395 * values. Requires comparator #1 to set DATAVMATCH and match
1396 * the data, and another comparator (DATAVADDR0) matching addr.
1397 */
1398 if (watchpoint->value) {
1399 LOG_DEBUG("data value watchpoint not YET supported");
1400 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1401 }
1402
1403 cortex_m3->dwt_comp_available--;
1404 LOG_DEBUG("dwt_comp_available: %d", cortex_m3->dwt_comp_available);
1405
1406 return ERROR_OK;
1407 }
1408
1409 static int
1410 cortex_m3_remove_watchpoint(struct target *target, struct watchpoint *watchpoint)
1411 {
1412 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
1413
1414 /* REVISIT why check? DWT can be updated with core running ... */
1415 if (target->state != TARGET_HALTED)
1416 {
1417 LOG_WARNING("target not halted");
1418 return ERROR_TARGET_NOT_HALTED;
1419 }
1420
1421 if (watchpoint->set)
1422 {
1423 cortex_m3_unset_watchpoint(target, watchpoint);
1424 }
1425
1426 cortex_m3->dwt_comp_available++;
1427 LOG_DEBUG("dwt_comp_available: %d", cortex_m3->dwt_comp_available);
1428
1429 return ERROR_OK;
1430 }
1431
1432 static void cortex_m3_enable_watchpoints(struct target *target)
1433 {
1434 struct watchpoint *watchpoint = target->watchpoints;
1435
1436 /* set any pending watchpoints */
1437 while (watchpoint)
1438 {
1439 if (!watchpoint->set)
1440 cortex_m3_set_watchpoint(target, watchpoint);
1441 watchpoint = watchpoint->next;
1442 }
1443 }
1444
1445 static int cortex_m3_load_core_reg_u32(struct target *target,
1446 enum armv7m_regtype type, uint32_t num, uint32_t * value)
1447 {
1448 int retval;
1449 struct armv7m_common *armv7m = target_to_armv7m(target);
1450 struct adiv5_dap *swjdp = &armv7m->dap;
1451
1452 /* NOTE: we "know" here that the register identifiers used
1453 * in the v7m header match the Cortex-M3 Debug Core Register
1454 * Selector values for R0..R15, xPSR, MSP, and PSP.
1455 */
1456 switch (num) {
1457 case 0 ... 18:
1458 /* read a normal core register */
1459 retval = cortexm3_dap_read_coreregister_u32(swjdp, value, num);
1460
1461 if (retval != ERROR_OK)
1462 {
1463 LOG_ERROR("JTAG failure %i",retval);
1464 return ERROR_JTAG_DEVICE_ERROR;
1465 }
1466 LOG_DEBUG("load from core reg %i value 0x%" PRIx32 "",(int)num,*value);
1467 break;
1468
1469 case ARMV7M_PRIMASK:
1470 case ARMV7M_BASEPRI:
1471 case ARMV7M_FAULTMASK:
1472 case ARMV7M_CONTROL:
1473 /* Cortex-M3 packages these four registers as bitfields
1474 * in one Debug Core register. So say r0 and r2 docs;
1475 * it was removed from r1 docs, but still works.
1476 */
1477 cortexm3_dap_read_coreregister_u32(swjdp, value, 20);
1478
1479 switch (num)
1480 {
1481 case ARMV7M_PRIMASK:
1482 *value = buf_get_u32((uint8_t*)value, 0, 1);
1483 break;
1484
1485 case ARMV7M_BASEPRI:
1486 *value = buf_get_u32((uint8_t*)value, 8, 8);
1487 break;
1488
1489 case ARMV7M_FAULTMASK:
1490 *value = buf_get_u32((uint8_t*)value, 16, 1);
1491 break;
1492
1493 case ARMV7M_CONTROL:
1494 *value = buf_get_u32((uint8_t*)value, 24, 2);
1495 break;
1496 }
1497
1498 LOG_DEBUG("load from special reg %i value 0x%" PRIx32 "", (int)num, *value);
1499 break;
1500
1501 default:
1502 return ERROR_INVALID_ARGUMENTS;
1503 }
1504
1505 return ERROR_OK;
1506 }
1507
1508 static int cortex_m3_store_core_reg_u32(struct target *target,
1509 enum armv7m_regtype type, uint32_t num, uint32_t value)
1510 {
1511 int retval;
1512 uint32_t reg;
1513 struct armv7m_common *armv7m = target_to_armv7m(target);
1514 struct adiv5_dap *swjdp = &armv7m->dap;
1515
1516 #ifdef ARMV7_GDB_HACKS
1517 /* If the LR register is being modified, make sure it will put us
1518 * in "thumb" mode, or an INVSTATE exception will occur. This is a
1519 * hack to deal with the fact that gdb will sometimes "forge"
1520 * return addresses, and doesn't set the LSB correctly (i.e., when
1521 * printing expressions containing function calls, it sets LR = 0.)
1522 * Valid exception return codes have bit 0 set too.
1523 */
1524 if (num == ARMV7M_R14)
1525 value |= 0x01;
1526 #endif
1527
1528 /* NOTE: we "know" here that the register identifiers used
1529 * in the v7m header match the Cortex-M3 Debug Core Register
1530 * Selector values for R0..R15, xPSR, MSP, and PSP.
1531 */
1532 switch (num) {
1533 case 0 ... 18:
1534 retval = cortexm3_dap_write_coreregister_u32(swjdp, value, num);
1535 if (retval != ERROR_OK)
1536 {
1537 struct reg *r;
1538
1539 LOG_ERROR("JTAG failure %i", retval);
1540 r = armv7m->core_cache->reg_list + num;
1541 r->dirty = r->valid;
1542 return ERROR_JTAG_DEVICE_ERROR;
1543 }
1544 LOG_DEBUG("write core reg %i value 0x%" PRIx32 "", (int)num, value);
1545 break;
1546
1547 case ARMV7M_PRIMASK:
1548 case ARMV7M_BASEPRI:
1549 case ARMV7M_FAULTMASK:
1550 case ARMV7M_CONTROL:
1551 /* Cortex-M3 packages these four registers as bitfields
1552 * in one Debug Core register. So say r0 and r2 docs;
1553 * it was removed from r1 docs, but still works.
1554 */
1555 cortexm3_dap_read_coreregister_u32(swjdp, &reg, 20);
1556
1557 switch (num)
1558 {
1559 case ARMV7M_PRIMASK:
1560 buf_set_u32((uint8_t*)&reg, 0, 1, value);
1561 break;
1562
1563 case ARMV7M_BASEPRI:
1564 buf_set_u32((uint8_t*)&reg, 8, 8, value);
1565 break;
1566
1567 case ARMV7M_FAULTMASK:
1568 buf_set_u32((uint8_t*)&reg, 16, 1, value);
1569 break;
1570
1571 case ARMV7M_CONTROL:
1572 buf_set_u32((uint8_t*)&reg, 24, 2, value);
1573 break;
1574 }
1575
1576 cortexm3_dap_write_coreregister_u32(swjdp, reg, 20);
1577
1578 LOG_DEBUG("write special reg %i value 0x%" PRIx32 " ", (int)num, value);
1579 break;
1580
1581 default:
1582 return ERROR_INVALID_ARGUMENTS;
1583 }
1584
1585 return ERROR_OK;
1586 }
1587
1588 static int cortex_m3_read_memory(struct target *target, uint32_t address,
1589 uint32_t size, uint32_t count, uint8_t *buffer)
1590 {
1591 struct armv7m_common *armv7m = target_to_armv7m(target);
1592 struct adiv5_dap *swjdp = &armv7m->dap;
1593 int retval = ERROR_INVALID_ARGUMENTS;
1594
1595 /* cortex_m3 handles unaligned memory access */
1596 if (count && buffer) {
1597 switch (size) {
1598 case 4:
1599 retval = mem_ap_read_buf_u32(swjdp, buffer, 4 * count, address);
1600 break;
1601 case 2:
1602 retval = mem_ap_read_buf_u16(swjdp, buffer, 2 * count, address);
1603 break;
1604 case 1:
1605 retval = mem_ap_read_buf_u8(swjdp, buffer, count, address);
1606 break;
1607 }
1608 }
1609
1610 return retval;
1611 }
1612
1613 static int cortex_m3_write_memory(struct target *target, uint32_t address,
1614 uint32_t size, uint32_t count, uint8_t *buffer)
1615 {
1616 struct armv7m_common *armv7m = target_to_armv7m(target);
1617 struct adiv5_dap *swjdp = &armv7m->dap;
1618 int retval = ERROR_INVALID_ARGUMENTS;
1619
1620 if (count && buffer) {
1621 switch (size) {
1622 case 4:
1623 retval = mem_ap_write_buf_u32(swjdp, buffer, 4 * count, address);
1624 break;
1625 case 2:
1626 retval = mem_ap_write_buf_u16(swjdp, buffer, 2 * count, address);
1627 break;
1628 case 1:
1629 retval = mem_ap_write_buf_u8(swjdp, buffer, count, address);
1630 break;
1631 }
1632 }
1633
1634 return retval;
1635 }
1636
1637 static int cortex_m3_bulk_write_memory(struct target *target, uint32_t address,
1638 uint32_t count, uint8_t *buffer)
1639 {
1640 return cortex_m3_write_memory(target, address, 4, count, buffer);
1641 }
1642
1643 static int cortex_m3_init_target(struct command_context *cmd_ctx,
1644 struct target *target)
1645 {
1646 armv7m_build_reg_cache(target);
1647 return ERROR_OK;
1648 }
1649
1650 /* REVISIT cache valid/dirty bits are unmaintained. We could set "valid"
1651 * on r/w if the core is not running, and clear on resume or reset ... or
1652 * at least, in a post_restore_context() method.
1653 */
1654
1655 struct dwt_reg_state {
1656 struct target *target;
1657 uint32_t addr;
1658 uint32_t value; /* scratch/cache */
1659 };
1660
1661 static int cortex_m3_dwt_get_reg(struct reg *reg)
1662 {
1663 struct dwt_reg_state *state = reg->arch_info;
1664
1665 return target_read_u32(state->target, state->addr, &state->value);
1666 }
1667
1668 static int cortex_m3_dwt_set_reg(struct reg *reg, uint8_t *buf)
1669 {
1670 struct dwt_reg_state *state = reg->arch_info;
1671
1672 return target_write_u32(state->target, state->addr,
1673 buf_get_u32(buf, 0, reg->size));
1674 }
1675
1676 struct dwt_reg {
1677 uint32_t addr;
1678 char *name;
1679 unsigned size;
1680 };
1681
1682 static struct dwt_reg dwt_base_regs[] = {
1683 { DWT_CTRL, "dwt_ctrl", 32, },
1684 /* NOTE that Erratum 532314 (fixed r2p0) affects CYCCNT: it wrongly
1685 * increments while the core is asleep.
1686 */
1687 { DWT_CYCCNT, "dwt_cyccnt", 32, },
1688 /* plus some 8 bit counters, useful for profiling with TPIU */
1689 };
1690
1691 static struct dwt_reg dwt_comp[] = {
1692 #define DWT_COMPARATOR(i) \
1693 { DWT_COMP0 + 0x10 * (i), "dwt_" #i "_comp", 32, }, \
1694 { DWT_MASK0 + 0x10 * (i), "dwt_" #i "_mask", 4, }, \
1695 { DWT_FUNCTION0 + 0x10 * (i), "dwt_" #i "_function", 32, }
1696 DWT_COMPARATOR(0),
1697 DWT_COMPARATOR(1),
1698 DWT_COMPARATOR(2),
1699 DWT_COMPARATOR(3),
1700 #undef DWT_COMPARATOR
1701 };
1702
1703 static const struct reg_arch_type dwt_reg_type = {
1704 .get = cortex_m3_dwt_get_reg,
1705 .set = cortex_m3_dwt_set_reg,
1706 };
1707
1708 static void
1709 cortex_m3_dwt_addreg(struct target *t, struct reg *r, struct dwt_reg *d)
1710 {
1711 struct dwt_reg_state *state;
1712
1713 state = calloc(1, sizeof *state);
1714 if (!state)
1715 return;
1716 state->addr = d->addr;
1717 state->target = t;
1718
1719 r->name = d->name;
1720 r->size = d->size;
1721 r->value = &state->value;
1722 r->arch_info = state;
1723 r->type = &dwt_reg_type;
1724 }
1725
1726 static void
1727 cortex_m3_dwt_setup(struct cortex_m3_common *cm3, struct target *target)
1728 {
1729 uint32_t dwtcr;
1730 struct reg_cache *cache;
1731 struct cortex_m3_dwt_comparator *comparator;
1732 int reg, i;
1733
1734 target_read_u32(target, DWT_CTRL, &dwtcr);
1735 if (!dwtcr) {
1736 LOG_DEBUG("no DWT");
1737 return;
1738 }
1739
1740 cm3->dwt_num_comp = (dwtcr >> 28) & 0xF;
1741 cm3->dwt_comp_available = cm3->dwt_num_comp;
1742 cm3->dwt_comparator_list = calloc(cm3->dwt_num_comp,
1743 sizeof(struct cortex_m3_dwt_comparator));
1744 if (!cm3->dwt_comparator_list) {
1745 fail0:
1746 cm3->dwt_num_comp = 0;
1747 LOG_ERROR("out of mem");
1748 return;
1749 }
1750
1751 cache = calloc(1, sizeof *cache);
1752 if (!cache) {
1753 fail1:
1754 free(cm3->dwt_comparator_list);
1755 goto fail0;
1756 }
1757 cache->name = "cortex-m3 dwt registers";
1758 cache->num_regs = 2 + cm3->dwt_num_comp * 3;
1759 cache->reg_list = calloc(cache->num_regs, sizeof *cache->reg_list);
1760 if (!cache->reg_list) {
1761 free(cache);
1762 goto fail1;
1763 }
1764
1765 for (reg = 0; reg < 2; reg++)
1766 cortex_m3_dwt_addreg(target, cache->reg_list + reg,
1767 dwt_base_regs + reg);
1768
1769 comparator = cm3->dwt_comparator_list;
1770 for (i = 0; i < cm3->dwt_num_comp; i++, comparator++) {
1771 int j;
1772
1773 comparator->dwt_comparator_address = DWT_COMP0 + 0x10 * i;
1774 for (j = 0; j < 3; j++, reg++)
1775 cortex_m3_dwt_addreg(target, cache->reg_list + reg,
1776 dwt_comp + 3 * i + j);
1777 }
1778
1779 *register_get_last_cache_p(&target->reg_cache) = cache;
1780 cm3->dwt_cache = cache;
1781
1782 LOG_DEBUG("DWT dwtcr 0x%" PRIx32 ", comp %d, watch%s",
1783 dwtcr, cm3->dwt_num_comp,
1784 (dwtcr & (0xf << 24)) ? " only" : "/trigger");
1785
1786 /* REVISIT: if num_comp > 1, check whether comparator #1 can
1787 * implement single-address data value watchpoints ... so we
1788 * won't need to check it later, when asked to set one up.
1789 */
1790 }
1791
1792 static int cortex_m3_examine(struct target *target)
1793 {
1794 int retval;
1795 uint32_t cpuid, fpcr;
1796 int i;
1797 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
1798 struct adiv5_dap *swjdp = &cortex_m3->armv7m.dap;
1799
1800 if ((retval = ahbap_debugport_init(swjdp)) != ERROR_OK)
1801 return retval;
1802
1803 if (!target_was_examined(target))
1804 {
1805 target_set_examined(target);
1806
1807 /* Read from Device Identification Registers */
1808 retval = target_read_u32(target, CPUID, &cpuid);
1809 if (retval != ERROR_OK)
1810 return retval;
1811
1812 if (((cpuid >> 4) & 0xc3f) == 0xc23)
1813 LOG_DEBUG("Cortex-M3 r%" PRId8 "p%" PRId8 " processor detected",
1814 (uint8_t)((cpuid >> 20) & 0xf), (uint8_t)((cpuid >> 0) & 0xf));
1815 LOG_DEBUG("cpuid: 0x%8.8" PRIx32 "", cpuid);
1816
1817 /* NOTE: FPB and DWT are both optional. */
1818
1819 /* Setup FPB */
1820 target_read_u32(target, FP_CTRL, &fpcr);
1821 cortex_m3->auto_bp_type = 1;
1822 cortex_m3->fp_num_code = ((fpcr >> 8) & 0x70) | ((fpcr >> 4) & 0xF); /* bits [14:12] and [7:4] */
1823 cortex_m3->fp_num_lit = (fpcr >> 8) & 0xF;
1824 cortex_m3->fp_code_available = cortex_m3->fp_num_code;
1825 cortex_m3->fp_comparator_list = calloc(cortex_m3->fp_num_code + cortex_m3->fp_num_lit, sizeof(struct cortex_m3_fp_comparator));
1826 cortex_m3->fpb_enabled = fpcr & 1;
1827 for (i = 0; i < cortex_m3->fp_num_code + cortex_m3->fp_num_lit; i++)
1828 {
1829 cortex_m3->fp_comparator_list[i].type = (i < cortex_m3->fp_num_code) ? FPCR_CODE : FPCR_LITERAL;
1830 cortex_m3->fp_comparator_list[i].fpcr_address = FP_COMP0 + 4 * i;
1831 }
1832 LOG_DEBUG("FPB fpcr 0x%" PRIx32 ", numcode %i, numlit %i", fpcr, cortex_m3->fp_num_code, cortex_m3->fp_num_lit);
1833
1834 /* Setup DWT */
1835 cortex_m3_dwt_setup(cortex_m3, target);
1836
1837 /* These hardware breakpoints only work for code in flash! */
1838 LOG_INFO("%s: hardware has %d breakpoints, %d watchpoints",
1839 target_name(target),
1840 cortex_m3->fp_num_code,
1841 cortex_m3->dwt_num_comp);
1842 }
1843
1844 return ERROR_OK;
1845 }
1846
1847 static int cortex_m3_dcc_read(struct adiv5_dap *swjdp, uint8_t *value, uint8_t *ctrl)
1848 {
1849 uint16_t dcrdr;
1850 int retval;
1851
1852 mem_ap_read_buf_u16(swjdp, (uint8_t*)&dcrdr, 1, DCB_DCRDR);
1853 *ctrl = (uint8_t)dcrdr;
1854 *value = (uint8_t)(dcrdr >> 8);
1855
1856 LOG_DEBUG("data 0x%x ctrl 0x%x", *value, *ctrl);
1857
1858 /* write ack back to software dcc register
1859 * signify we have read data */
1860 if (dcrdr & (1 << 0))
1861 {
1862 dcrdr = 0;
1863 retval = mem_ap_write_buf_u16(swjdp, (uint8_t*)&dcrdr, 1, DCB_DCRDR);
1864 if (retval != ERROR_OK)
1865 return retval;
1866 }
1867
1868 return ERROR_OK;
1869 }
1870
1871 static int cortex_m3_target_request_data(struct target *target,
1872 uint32_t size, uint8_t *buffer)
1873 {
1874 struct armv7m_common *armv7m = target_to_armv7m(target);
1875 struct adiv5_dap *swjdp = &armv7m->dap;
1876 uint8_t data;
1877 uint8_t ctrl;
1878 uint32_t i;
1879
1880 for (i = 0; i < (size * 4); i++)
1881 {
1882 cortex_m3_dcc_read(swjdp, &data, &ctrl);
1883 buffer[i] = data;
1884 }
1885
1886 return ERROR_OK;
1887 }
1888
1889 static int cortex_m3_handle_target_request(void *priv)
1890 {
1891 struct target *target = priv;
1892 if (!target_was_examined(target))
1893 return ERROR_OK;
1894 struct armv7m_common *armv7m = target_to_armv7m(target);
1895 struct adiv5_dap *swjdp = &armv7m->dap;
1896
1897 if (!target->dbg_msg_enabled)
1898 return ERROR_OK;
1899
1900 if (target->state == TARGET_RUNNING)
1901 {
1902 uint8_t data;
1903 uint8_t ctrl;
1904
1905 cortex_m3_dcc_read(swjdp, &data, &ctrl);
1906
1907 /* check if we have data */
1908 if (ctrl & (1 << 0))
1909 {
1910 uint32_t request;
1911
1912 /* we assume target is quick enough */
1913 request = data;
1914 cortex_m3_dcc_read(swjdp, &data, &ctrl);
1915 request |= (data << 8);
1916 cortex_m3_dcc_read(swjdp, &data, &ctrl);
1917 request |= (data << 16);
1918 cortex_m3_dcc_read(swjdp, &data, &ctrl);
1919 request |= (data << 24);
1920 target_request(target, request);
1921 }
1922 }
1923
1924 return ERROR_OK;
1925 }
1926
1927 static int cortex_m3_init_arch_info(struct target *target,
1928 struct cortex_m3_common *cortex_m3, struct jtag_tap *tap)
1929 {
1930 int retval;
1931 struct armv7m_common *armv7m = &cortex_m3->armv7m;
1932
1933 armv7m_init_arch_info(target, armv7m);
1934
1935 /* prepare JTAG information for the new target */
1936 cortex_m3->jtag_info.tap = tap;
1937 cortex_m3->jtag_info.scann_size = 4;
1938
1939 /* default reset mode is to use srst if fitted
1940 * if not it will use CORTEX_M3_RESET_VECTRESET */
1941 cortex_m3->soft_reset_config = CORTEX_M3_RESET_SRST;
1942
1943 armv7m->arm.dap = &armv7m->dap;
1944
1945 /* Leave (only) generic DAP stuff for debugport_init(); */
1946 armv7m->dap.jtag_info = &cortex_m3->jtag_info;
1947 armv7m->dap.memaccess_tck = 8;
1948 /* Cortex-M3 has 4096 bytes autoincrement range */
1949 armv7m->dap.tar_autoincr_block = (1 << 12);
1950
1951 /* register arch-specific functions */
1952 armv7m->examine_debug_reason = cortex_m3_examine_debug_reason;
1953
1954 armv7m->post_debug_entry = NULL;
1955
1956 armv7m->pre_restore_context = NULL;
1957
1958 armv7m->load_core_reg_u32 = cortex_m3_load_core_reg_u32;
1959 armv7m->store_core_reg_u32 = cortex_m3_store_core_reg_u32;
1960
1961 target_register_timer_callback(cortex_m3_handle_target_request, 1, 1, target);
1962
1963 if ((retval = arm_jtag_setup_connection(&cortex_m3->jtag_info)) != ERROR_OK)
1964 {
1965 return retval;
1966 }
1967
1968 return ERROR_OK;
1969 }
1970
1971 static int cortex_m3_target_create(struct target *target, Jim_Interp *interp)
1972 {
1973 struct cortex_m3_common *cortex_m3 = calloc(1,sizeof(struct cortex_m3_common));
1974
1975 cortex_m3->common_magic = CORTEX_M3_COMMON_MAGIC;
1976 cortex_m3_init_arch_info(target, cortex_m3, target->tap);
1977
1978 return ERROR_OK;
1979 }
1980
1981 /*--------------------------------------------------------------------------*/
1982
1983 static int cortex_m3_verify_pointer(struct command_context *cmd_ctx,
1984 struct cortex_m3_common *cm3)
1985 {
1986 if (cm3->common_magic != CORTEX_M3_COMMON_MAGIC) {
1987 command_print(cmd_ctx, "target is not a Cortex-M3");
1988 return ERROR_TARGET_INVALID;
1989 }
1990 return ERROR_OK;
1991 }
1992
1993 /*
1994 * Only stuff below this line should need to verify that its target
1995 * is a Cortex-M3. Everything else should have indirected through the
1996 * cortexm3_target structure, which is only used with CM3 targets.
1997 */
1998
1999 static const struct {
2000 char name[10];
2001 unsigned mask;
2002 } vec_ids[] = {
2003 { "hard_err", VC_HARDERR, },
2004 { "int_err", VC_INTERR, },
2005 { "bus_err", VC_BUSERR, },
2006 { "state_err", VC_STATERR, },
2007 { "chk_err", VC_CHKERR, },
2008 { "nocp_err", VC_NOCPERR, },
2009 { "mm_err", VC_MMERR, },
2010 { "reset", VC_CORERESET, },
2011 };
2012
2013 COMMAND_HANDLER(handle_cortex_m3_vector_catch_command)
2014 {
2015 struct target *target = get_current_target(CMD_CTX);
2016 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
2017 struct armv7m_common *armv7m = &cortex_m3->armv7m;
2018 struct adiv5_dap *swjdp = &armv7m->dap;
2019 uint32_t demcr = 0;
2020 int retval;
2021
2022 retval = cortex_m3_verify_pointer(CMD_CTX, cortex_m3);
2023 if (retval != ERROR_OK)
2024 return retval;
2025
2026 retval = mem_ap_read_atomic_u32(swjdp, DCB_DEMCR, &demcr);
2027 if (retval != ERROR_OK)
2028 return retval;
2029
2030 if (CMD_ARGC > 0) {
2031 unsigned catch = 0;
2032
2033 if (CMD_ARGC == 1) {
2034 if (strcmp(CMD_ARGV[0], "all") == 0) {
2035 catch = VC_HARDERR | VC_INTERR | VC_BUSERR
2036 | VC_STATERR | VC_CHKERR | VC_NOCPERR
2037 | VC_MMERR | VC_CORERESET;
2038 goto write;
2039 } else if (strcmp(CMD_ARGV[0], "none") == 0) {
2040 goto write;
2041 }
2042 }
2043 while (CMD_ARGC-- > 0) {
2044 unsigned i;
2045 for (i = 0; i < ARRAY_SIZE(vec_ids); i++) {
2046 if (strcmp(CMD_ARGV[CMD_ARGC], vec_ids[i].name) != 0)
2047 continue;
2048 catch |= vec_ids[i].mask;
2049 break;
2050 }
2051 if (i == ARRAY_SIZE(vec_ids)) {
2052 LOG_ERROR("No CM3 vector '%s'", CMD_ARGV[CMD_ARGC]);
2053 return ERROR_INVALID_ARGUMENTS;
2054 }
2055 }
2056 write:
2057 /* For now, armv7m->demcr only stores vector catch flags. */
2058 armv7m->demcr = catch;
2059
2060 demcr &= ~0xffff;
2061 demcr |= catch;
2062
2063 /* write, but don't assume it stuck (why not??) */
2064 retval = mem_ap_write_u32(swjdp, DCB_DEMCR, demcr);
2065 if (retval != ERROR_OK)
2066 return retval;
2067 retval = mem_ap_read_atomic_u32(swjdp, DCB_DEMCR, &demcr);
2068 if (retval != ERROR_OK)
2069 return retval;
2070
2071 /* FIXME be sure to clear DEMCR on clean server shutdown.
2072 * Otherwise the vector catch hardware could fire when there's
2073 * no debugger hooked up, causing much confusion...
2074 */
2075 }
2076
2077 for (unsigned i = 0; i < ARRAY_SIZE(vec_ids); i++)
2078 {
2079 command_print(CMD_CTX, "%9s: %s", vec_ids[i].name,
2080 (demcr & vec_ids[i].mask) ? "catch" : "ignore");
2081 }
2082
2083 return ERROR_OK;
2084 }
2085
2086 COMMAND_HANDLER(handle_cortex_m3_mask_interrupts_command)
2087 {
2088 struct target *target = get_current_target(CMD_CTX);
2089 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
2090 int retval;
2091
2092 retval = cortex_m3_verify_pointer(CMD_CTX, cortex_m3);
2093 if (retval != ERROR_OK)
2094 return retval;
2095
2096 if (target->state != TARGET_HALTED)
2097 {
2098 command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME);
2099 return ERROR_OK;
2100 }
2101
2102 if (CMD_ARGC > 0)
2103 {
2104 bool enable;
2105 COMMAND_PARSE_ON_OFF(CMD_ARGV[0], enable);
2106 uint32_t mask_on = C_HALT | (enable ? C_MASKINTS : 0);
2107 uint32_t mask_off = enable ? 0 : C_MASKINTS;
2108 cortex_m3_write_debug_halt_mask(target, mask_on, mask_off);
2109 }
2110
2111 command_print(CMD_CTX, "cortex_m3 interrupt mask %s",
2112 (cortex_m3->dcb_dhcsr & C_MASKINTS) ? "on" : "off");
2113
2114 return ERROR_OK;
2115 }
2116
2117 COMMAND_HANDLER(handle_cortex_m3_reset_config_command)
2118 {
2119 struct target *target = get_current_target(CMD_CTX);
2120 struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
2121 int retval;
2122 char *reset_config;
2123
2124 retval = cortex_m3_verify_pointer(CMD_CTX, cortex_m3);
2125 if (retval != ERROR_OK)
2126 return retval;
2127
2128 if (CMD_ARGC > 0)
2129 {
2130 if (strcmp(*CMD_ARGV, "systesetreq") == 0)
2131 cortex_m3->soft_reset_config = CORTEX_M3_RESET_SYSRESETREQ;
2132 else if (strcmp(*CMD_ARGV, "vectreset") == 0)
2133 cortex_m3->soft_reset_config = CORTEX_M3_RESET_VECTRESET;
2134 else
2135 cortex_m3->soft_reset_config = CORTEX_M3_RESET_SRST;
2136 }
2137
2138 switch (cortex_m3->soft_reset_config)
2139 {
2140 case CORTEX_M3_RESET_SRST:
2141 reset_config = "srst";
2142 break;
2143
2144 case CORTEX_M3_RESET_SYSRESETREQ:
2145 reset_config = "sysresetreq";
2146 break;
2147
2148 case CORTEX_M3_RESET_VECTRESET:
2149 reset_config = "vectreset";
2150 break;
2151
2152 default:
2153 reset_config = "unknown";
2154 break;
2155 }
2156
2157 command_print(CMD_CTX, "cortex_m3 reset_config %s", reset_config);
2158
2159 return ERROR_OK;
2160 }
2161
2162 static const struct command_registration cortex_m3_exec_command_handlers[] = {
2163 {
2164 .name = "maskisr",
2165 .handler = handle_cortex_m3_mask_interrupts_command,
2166 .mode = COMMAND_EXEC,
2167 .help = "mask cortex_m3 interrupts",
2168 .usage = "['on'|'off']",
2169 },
2170 {
2171 .name = "vector_catch",
2172 .handler = handle_cortex_m3_vector_catch_command,
2173 .mode = COMMAND_EXEC,
2174 .help = "configure hardware vectors to trigger debug entry",
2175 .usage = "['all'|'none'|('bus_err'|'chk_err'|...)*]",
2176 },
2177 {
2178 .name = "reset_config",
2179 .handler = handle_cortex_m3_reset_config_command,
2180 .mode = COMMAND_ANY,
2181 .help = "configure software reset handling",
2182 .usage = "['srst'|'sysresetreq'|'vectreset']",
2183 },
2184 COMMAND_REGISTRATION_DONE
2185 };
2186 static const struct command_registration cortex_m3_command_handlers[] = {
2187 {
2188 .chain = armv7m_command_handlers,
2189 },
2190 {
2191 .name = "cortex_m3",
2192 .mode = COMMAND_EXEC,
2193 .help = "Cortex-M3 command group",
2194 .chain = cortex_m3_exec_command_handlers,
2195 },
2196 COMMAND_REGISTRATION_DONE
2197 };
2198
2199 struct target_type cortexm3_target =
2200 {
2201 .name = "cortex_m3",
2202
2203 .poll = cortex_m3_poll,
2204 .arch_state = armv7m_arch_state,
2205
2206 .target_request_data = cortex_m3_target_request_data,
2207
2208 .halt = cortex_m3_halt,
2209 .resume = cortex_m3_resume,
2210 .step = cortex_m3_step,
2211
2212 .assert_reset = cortex_m3_assert_reset,
2213 .deassert_reset = cortex_m3_deassert_reset,
2214 .soft_reset_halt = cortex_m3_soft_reset_halt,
2215
2216 .get_gdb_reg_list = armv7m_get_gdb_reg_list,
2217
2218 .read_memory = cortex_m3_read_memory,
2219 .write_memory = cortex_m3_write_memory,
2220 .bulk_write_memory = cortex_m3_bulk_write_memory,
2221 .checksum_memory = armv7m_checksum_memory,
2222 .blank_check_memory = armv7m_blank_check_memory,
2223
2224 .run_algorithm = armv7m_run_algorithm,
2225
2226 .add_breakpoint = cortex_m3_add_breakpoint,
2227 .remove_breakpoint = cortex_m3_remove_breakpoint,
2228 .add_watchpoint = cortex_m3_add_watchpoint,
2229 .remove_watchpoint = cortex_m3_remove_watchpoint,
2230
2231 .commands = cortex_m3_command_handlers,
2232 .target_create = cortex_m3_target_create,
2233 .init_target = cortex_m3_init_target,
2234 .examine = cortex_m3_examine,
2235 };
add intel's jflashmm functionality to openocd