1 /***************************************************************************
2 * Copyright (C) 2009 Zachary T Welch *
3 * zw@superlucidity.net *
5 * Copyright (C) 2007,2008,2009 Øyvind Harboe *
6 * oyvind.harboe@zylin.com *
8 * Copyright (C) 2009 SoftPLC Corporation *
12 * Copyright (C) 2005 by Dominic Rath *
13 * Dominic.Rath@gmx.de *
15 * This program is free software; you can redistribute it and/or modify *
16 * it under the terms of the GNU General Public License as published by *
17 * the Free Software Foundation; either version 2 of the License, or *
18 * (at your option) any later version. *
20 * This program is distributed in the hope that it will be useful, *
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
23 * GNU General Public License for more details. *
25 * You should have received a copy of the GNU General Public License *
26 * along with this program; if not, write to the *
27 * Free Software Foundation, Inc., *
28 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
29 ***************************************************************************/
37 #include "interface.h"
38 #include <transport/transport.h>
44 /* SVF and XSVF are higher level JTAG command sets (for boundary scan) */
46 #include "xsvf/xsvf.h"
48 /** The number of JTAG queue flushes (for profiling and debugging purposes). */
49 static int jtag_flush_queue_count
;
51 /* Sleep this # of ms after flushing the queue */
52 static int jtag_flush_queue_sleep
;
54 static void jtag_add_scan_check(struct jtag_tap
*active
,
55 void (*jtag_add_scan
)(struct jtag_tap
*active
,
57 const struct scan_field
*in_fields
,
59 int in_num_fields
, struct scan_field
*in_fields
, tap_state_t state
);
62 * The jtag_error variable is set when an error occurs while executing
63 * the queue. Application code may set this using jtag_set_error(),
64 * when an error occurs during processing that should be reported during
65 * jtag_execute_queue().
67 * The value is set and cleared, but never read by normal application code.
69 * This value is returned (and cleared) by jtag_execute_queue().
71 static int jtag_error
= ERROR_OK
;
73 static const char *jtag_event_strings
[] = {
74 [JTAG_TRST_ASSERTED
] = "TAP reset",
75 [JTAG_TAP_EVENT_SETUP
] = "TAP setup",
76 [JTAG_TAP_EVENT_ENABLE
] = "TAP enabled",
77 [JTAG_TAP_EVENT_DISABLE
] = "TAP disabled",
81 * JTAG adapters must initialize with TRST and SRST de-asserted
82 * (they're negative logic, so that means *high*). But some
83 * hardware doesn't necessarily work that way ... so set things
84 * up so that jtag_init() always forces that state.
86 static int jtag_trst
= -1;
87 static int jtag_srst
= -1;
90 * List all TAPs that have been created.
92 static struct jtag_tap
*__jtag_all_taps
;
94 * The number of TAPs in the __jtag_all_taps list, used to track the
95 * assigned chain position to new TAPs
97 static unsigned jtag_num_taps
;
99 static enum reset_types jtag_reset_config
= RESET_NONE
;
100 tap_state_t cmd_queue_cur_state
= TAP_RESET
;
102 static bool jtag_verify_capture_ir
= true;
103 static int jtag_verify
= 1;
105 /* how long the OpenOCD should wait before attempting JTAG communication after reset lines
106 *deasserted (in ms) */
107 static int adapter_nsrst_delay
; /* default to no nSRST delay */
108 static int jtag_ntrst_delay
;/* default to no nTRST delay */
109 static int adapter_nsrst_assert_width
; /* width of assertion */
110 static int jtag_ntrst_assert_width
; /* width of assertion */
113 * Contains a single callback along with a pointer that will be passed
114 * when an event occurs.
116 struct jtag_event_callback
{
117 /** a event callback */
118 jtag_event_handler_t callback
;
119 /** the private data to pass to the callback */
121 /** the next callback */
122 struct jtag_event_callback
*next
;
125 /* callbacks to inform high-level handlers about JTAG state changes */
126 static struct jtag_event_callback
*jtag_event_callbacks
;
129 static int speed_khz
;
130 /* speed to fallback to when RCLK is requested but not supported */
131 static int rclk_fallback_speed_khz
;
132 static enum {CLOCK_MODE_UNSELECTED
, CLOCK_MODE_KHZ
, CLOCK_MODE_RCLK
} clock_mode
;
133 static int jtag_speed
;
135 static struct jtag_interface
*jtag
;
137 const struct swd_driver
*swd
;
140 struct jtag_interface
*jtag_interface
;
142 void jtag_set_flush_queue_sleep(int ms
)
144 jtag_flush_queue_sleep
= ms
;
147 void jtag_set_error(int error
)
149 if ((error
== ERROR_OK
) || (jtag_error
!= ERROR_OK
))
154 int jtag_error_clear(void)
156 int temp
= jtag_error
;
157 jtag_error
= ERROR_OK
;
163 static bool jtag_poll
= 1;
165 bool is_jtag_poll_safe(void)
167 /* Polling can be disabled explicitly with set_enabled(false).
168 * It is also implicitly disabled while TRST is active and
169 * while SRST is gating the JTAG clock.
171 if (!jtag_poll
|| jtag_trst
!= 0)
173 return jtag_srst
== 0 || (jtag_reset_config
& RESET_SRST_NO_GATING
);
176 bool jtag_poll_get_enabled(void)
181 void jtag_poll_set_enabled(bool value
)
188 struct jtag_tap
*jtag_all_taps(void)
190 return __jtag_all_taps
;
193 unsigned jtag_tap_count(void)
195 return jtag_num_taps
;
198 unsigned jtag_tap_count_enabled(void)
200 struct jtag_tap
*t
= jtag_all_taps();
210 /** Append a new TAP to the chain of all taps. */
211 void jtag_tap_add(struct jtag_tap
*t
)
213 t
->abs_chain_position
= jtag_num_taps
++;
215 struct jtag_tap
**tap
= &__jtag_all_taps
;
217 tap
= &(*tap
)->next_tap
;
221 /* returns a pointer to the n-th device in the scan chain */
222 struct jtag_tap
*jtag_tap_by_position(unsigned n
)
224 struct jtag_tap
*t
= jtag_all_taps();
232 struct jtag_tap
*jtag_tap_by_string(const char *s
)
234 /* try by name first */
235 struct jtag_tap
*t
= jtag_all_taps();
238 if (0 == strcmp(t
->dotted_name
, s
))
243 /* no tap found by name, so try to parse the name as a number */
245 if (parse_uint(s
, &n
) != ERROR_OK
)
248 /* FIXME remove this numeric fallback code late June 2010, along
249 * with all info in the User's Guide that TAPs have numeric IDs.
250 * Also update "scan_chain" output to not display the numbers.
252 t
= jtag_tap_by_position(n
);
254 LOG_WARNING("Specify TAP '%s' by name, not number %u",
260 struct jtag_tap
*jtag_tap_next_enabled(struct jtag_tap
*p
)
262 p
= p
? p
->next_tap
: jtag_all_taps();
271 const char *jtag_tap_name(const struct jtag_tap
*tap
)
273 return (tap
== NULL
) ? "(unknown)" : tap
->dotted_name
;
277 int jtag_register_event_callback(jtag_event_handler_t callback
, void *priv
)
279 struct jtag_event_callback
**callbacks_p
= &jtag_event_callbacks
;
281 if (callback
== NULL
)
282 return ERROR_COMMAND_SYNTAX_ERROR
;
285 while ((*callbacks_p
)->next
)
286 callbacks_p
= &((*callbacks_p
)->next
);
287 callbacks_p
= &((*callbacks_p
)->next
);
290 (*callbacks_p
) = malloc(sizeof(struct jtag_event_callback
));
291 (*callbacks_p
)->callback
= callback
;
292 (*callbacks_p
)->priv
= priv
;
293 (*callbacks_p
)->next
= NULL
;
298 int jtag_unregister_event_callback(jtag_event_handler_t callback
, void *priv
)
300 struct jtag_event_callback
**p
= &jtag_event_callbacks
, *temp
;
302 if (callback
== NULL
)
303 return ERROR_COMMAND_SYNTAX_ERROR
;
306 if (((*p
)->priv
!= priv
) || ((*p
)->callback
!= callback
)) {
319 int jtag_call_event_callbacks(enum jtag_event event
)
321 struct jtag_event_callback
*callback
= jtag_event_callbacks
;
323 LOG_DEBUG("jtag event: %s", jtag_event_strings
[event
]);
326 struct jtag_event_callback
*next
;
328 /* callback may remove itself */
329 next
= callback
->next
;
330 callback
->callback(event
, callback
->priv
);
337 static void jtag_checks(void)
339 assert(jtag_trst
== 0);
342 static void jtag_prelude(tap_state_t state
)
346 assert(state
!= TAP_INVALID
);
348 cmd_queue_cur_state
= state
;
351 void jtag_add_ir_scan_noverify(struct jtag_tap
*active
, const struct scan_field
*in_fields
,
356 int retval
= interface_jtag_add_ir_scan(active
, in_fields
, state
);
357 jtag_set_error(retval
);
360 static void jtag_add_ir_scan_noverify_callback(struct jtag_tap
*active
,
362 const struct scan_field
*in_fields
,
365 jtag_add_ir_scan_noverify(active
, in_fields
, state
);
368 /* If fields->in_value is filled out, then the captured IR value will be checked */
369 void jtag_add_ir_scan(struct jtag_tap
*active
, struct scan_field
*in_fields
, tap_state_t state
)
371 assert(state
!= TAP_RESET
);
373 if (jtag_verify
&& jtag_verify_capture_ir
) {
374 /* 8 x 32 bit id's is enough for all invocations */
376 /* if we are to run a verification of the ir scan, we need to get the input back.
377 * We may have to allocate space if the caller didn't ask for the input back.
379 in_fields
->check_value
= active
->expected
;
380 in_fields
->check_mask
= active
->expected_mask
;
381 jtag_add_scan_check(active
, jtag_add_ir_scan_noverify_callback
, 1, in_fields
,
384 jtag_add_ir_scan_noverify(active
, in_fields
, state
);
387 void jtag_add_plain_ir_scan(int num_bits
, const uint8_t *out_bits
, uint8_t *in_bits
,
390 assert(out_bits
!= NULL
);
391 assert(state
!= TAP_RESET
);
395 int retval
= interface_jtag_add_plain_ir_scan(
396 num_bits
, out_bits
, in_bits
, state
);
397 jtag_set_error(retval
);
400 static int jtag_check_value_inner(uint8_t *captured
, uint8_t *in_check_value
,
401 uint8_t *in_check_mask
, int num_bits
);
403 static int jtag_check_value_mask_callback(jtag_callback_data_t data0
,
404 jtag_callback_data_t data1
,
405 jtag_callback_data_t data2
,
406 jtag_callback_data_t data3
)
408 return jtag_check_value_inner((uint8_t *)data0
,
414 static void jtag_add_scan_check(struct jtag_tap
*active
, void (*jtag_add_scan
)(
415 struct jtag_tap
*active
,
417 const struct scan_field
*in_fields
,
419 int in_num_fields
, struct scan_field
*in_fields
, tap_state_t state
)
421 jtag_add_scan(active
, in_num_fields
, in_fields
, state
);
423 for (int i
= 0; i
< in_num_fields
; i
++) {
424 if ((in_fields
[i
].check_value
!= NULL
) && (in_fields
[i
].in_value
!= NULL
)) {
425 /* this is synchronous for a minidriver */
426 jtag_add_callback4(jtag_check_value_mask_callback
,
427 (jtag_callback_data_t
)in_fields
[i
].in_value
,
428 (jtag_callback_data_t
)in_fields
[i
].check_value
,
429 (jtag_callback_data_t
)in_fields
[i
].check_mask
,
430 (jtag_callback_data_t
)in_fields
[i
].num_bits
);
435 void jtag_add_dr_scan_check(struct jtag_tap
*active
,
437 struct scan_field
*in_fields
,
441 jtag_add_scan_check(active
, jtag_add_dr_scan
, in_num_fields
, in_fields
, state
);
443 jtag_add_dr_scan(active
, in_num_fields
, in_fields
, state
);
447 void jtag_add_dr_scan(struct jtag_tap
*active
,
449 const struct scan_field
*in_fields
,
452 assert(state
!= TAP_RESET
);
457 retval
= interface_jtag_add_dr_scan(active
, in_num_fields
, in_fields
, state
);
458 jtag_set_error(retval
);
461 void jtag_add_plain_dr_scan(int num_bits
, const uint8_t *out_bits
, uint8_t *in_bits
,
464 assert(out_bits
!= NULL
);
465 assert(state
!= TAP_RESET
);
470 retval
= interface_jtag_add_plain_dr_scan(num_bits
, out_bits
, in_bits
, state
);
471 jtag_set_error(retval
);
474 void jtag_add_tlr(void)
476 jtag_prelude(TAP_RESET
);
477 jtag_set_error(interface_jtag_add_tlr());
479 /* NOTE: order here matches TRST path in jtag_add_reset() */
480 jtag_call_event_callbacks(JTAG_TRST_ASSERTED
);
481 jtag_notify_event(JTAG_TRST_ASSERTED
);
485 * If supported by the underlying adapter, this clocks a raw bit sequence
486 * onto TMS for switching betwen JTAG and SWD modes.
488 * DO NOT use this to bypass the integrity checks and logging provided
489 * by the jtag_add_pathmove() and jtag_add_statemove() calls.
491 * @param nbits How many bits to clock out.
492 * @param seq The bit sequence. The LSB is bit 0 of seq[0].
493 * @param state The JTAG tap state to record on completion. Use
494 * TAP_INVALID to represent being in in SWD mode.
496 * @todo Update naming conventions to stop assuming everything is JTAG.
498 int jtag_add_tms_seq(unsigned nbits
, const uint8_t *seq
, enum tap_state state
)
502 if (!(jtag
->supported
& DEBUG_CAP_TMS_SEQ
))
503 return ERROR_JTAG_NOT_IMPLEMENTED
;
506 cmd_queue_cur_state
= state
;
508 retval
= interface_add_tms_seq(nbits
, seq
, state
);
509 jtag_set_error(retval
);
513 void jtag_add_pathmove(int num_states
, const tap_state_t
*path
)
515 tap_state_t cur_state
= cmd_queue_cur_state
;
517 /* the last state has to be a stable state */
518 if (!tap_is_state_stable(path
[num_states
- 1])) {
519 LOG_ERROR("BUG: TAP path doesn't finish in a stable state");
520 jtag_set_error(ERROR_JTAG_NOT_STABLE_STATE
);
524 for (int i
= 0; i
< num_states
; i
++) {
525 if (path
[i
] == TAP_RESET
) {
526 LOG_ERROR("BUG: TAP_RESET is not a valid state for pathmove sequences");
527 jtag_set_error(ERROR_JTAG_STATE_INVALID
);
531 if (tap_state_transition(cur_state
, true) != path
[i
] &&
532 tap_state_transition(cur_state
, false) != path
[i
]) {
533 LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition",
534 tap_state_name(cur_state
), tap_state_name(path
[i
]));
535 jtag_set_error(ERROR_JTAG_TRANSITION_INVALID
);
543 jtag_set_error(interface_jtag_add_pathmove(num_states
, path
));
544 cmd_queue_cur_state
= path
[num_states
- 1];
547 int jtag_add_statemove(tap_state_t goal_state
)
549 tap_state_t cur_state
= cmd_queue_cur_state
;
551 if (goal_state
!= cur_state
) {
552 LOG_DEBUG("cur_state=%s goal_state=%s",
553 tap_state_name(cur_state
),
554 tap_state_name(goal_state
));
557 /* If goal is RESET, be paranoid and force that that transition
558 * (e.g. five TCK cycles, TMS high). Else trust "cur_state".
560 if (goal_state
== TAP_RESET
)
562 else if (goal_state
== cur_state
)
565 else if (tap_is_state_stable(cur_state
) && tap_is_state_stable(goal_state
)) {
566 unsigned tms_bits
= tap_get_tms_path(cur_state
, goal_state
);
567 unsigned tms_count
= tap_get_tms_path_len(cur_state
, goal_state
);
568 tap_state_t moves
[8];
569 assert(tms_count
< ARRAY_SIZE(moves
));
571 for (unsigned i
= 0; i
< tms_count
; i
++, tms_bits
>>= 1) {
572 bool bit
= tms_bits
& 1;
574 cur_state
= tap_state_transition(cur_state
, bit
);
575 moves
[i
] = cur_state
;
578 jtag_add_pathmove(tms_count
, moves
);
579 } else if (tap_state_transition(cur_state
, true) == goal_state
580 || tap_state_transition(cur_state
, false) == goal_state
)
581 jtag_add_pathmove(1, &goal_state
);
588 void jtag_add_runtest(int num_cycles
, tap_state_t state
)
591 jtag_set_error(interface_jtag_add_runtest(num_cycles
, state
));
595 void jtag_add_clocks(int num_cycles
)
597 if (!tap_is_state_stable(cmd_queue_cur_state
)) {
598 LOG_ERROR("jtag_add_clocks() called with TAP in unstable state \"%s\"",
599 tap_state_name(cmd_queue_cur_state
));
600 jtag_set_error(ERROR_JTAG_NOT_STABLE_STATE
);
604 if (num_cycles
> 0) {
606 jtag_set_error(interface_jtag_add_clocks(num_cycles
));
610 void swd_add_reset(int req_srst
)
613 if (!(jtag_reset_config
& RESET_HAS_SRST
)) {
614 LOG_ERROR("BUG: can't assert SRST");
615 jtag_set_error(ERROR_FAIL
);
621 /* Maybe change SRST signal state */
622 if (jtag_srst
!= req_srst
) {
625 retval
= interface_jtag_add_reset(0, req_srst
);
626 if (retval
!= ERROR_OK
)
627 jtag_set_error(retval
);
629 retval
= jtag_execute_queue();
631 if (retval
!= ERROR_OK
) {
632 LOG_ERROR("TRST/SRST error");
636 /* SRST resets everything hooked up to that signal */
637 jtag_srst
= req_srst
;
639 LOG_DEBUG("SRST line asserted");
640 if (adapter_nsrst_assert_width
)
641 jtag_add_sleep(adapter_nsrst_assert_width
* 1000);
643 LOG_DEBUG("SRST line released");
644 if (adapter_nsrst_delay
)
645 jtag_add_sleep(adapter_nsrst_delay
* 1000);
650 void jtag_add_reset(int req_tlr_or_trst
, int req_srst
)
652 int trst_with_tlr
= 0;
656 /* Without SRST, we must use target-specific JTAG operations
657 * on each target; callers should not be requesting SRST when
658 * that signal doesn't exist.
660 * RESET_SRST_PULLS_TRST is a board or chip level quirk, which
661 * can kick in even if the JTAG adapter can't drive TRST.
664 if (!(jtag_reset_config
& RESET_HAS_SRST
)) {
665 LOG_ERROR("BUG: can't assert SRST");
666 jtag_set_error(ERROR_FAIL
);
669 if ((jtag_reset_config
& RESET_SRST_PULLS_TRST
) != 0
670 && !req_tlr_or_trst
) {
671 LOG_ERROR("BUG: can't assert only SRST");
672 jtag_set_error(ERROR_FAIL
);
678 /* JTAG reset (entry to TAP_RESET state) can always be achieved
679 * using TCK and TMS; that may go through a TAP_{IR,DR}UPDATE
680 * state first. TRST accelerates it, and bypasses those states.
682 * RESET_TRST_PULLS_SRST is a board or chip level quirk, which
683 * can kick in even if the JTAG adapter can't drive SRST.
685 if (req_tlr_or_trst
) {
686 if (!(jtag_reset_config
& RESET_HAS_TRST
))
688 else if ((jtag_reset_config
& RESET_TRST_PULLS_SRST
) != 0
695 /* Maybe change TRST and/or SRST signal state */
696 if (jtag_srst
!= new_srst
|| jtag_trst
!= new_trst
) {
699 retval
= interface_jtag_add_reset(new_trst
, new_srst
);
700 if (retval
!= ERROR_OK
)
701 jtag_set_error(retval
);
703 retval
= jtag_execute_queue();
705 if (retval
!= ERROR_OK
) {
706 LOG_ERROR("TRST/SRST error");
711 /* SRST resets everything hooked up to that signal */
712 if (jtag_srst
!= new_srst
) {
713 jtag_srst
= new_srst
;
715 LOG_DEBUG("SRST line asserted");
716 if (adapter_nsrst_assert_width
)
717 jtag_add_sleep(adapter_nsrst_assert_width
* 1000);
719 LOG_DEBUG("SRST line released");
720 if (adapter_nsrst_delay
)
721 jtag_add_sleep(adapter_nsrst_delay
* 1000);
725 /* Maybe enter the JTAG TAP_RESET state ...
726 * - using only TMS, TCK, and the JTAG state machine
727 * - or else more directly, using TRST
729 * TAP_RESET should be invisible to non-debug parts of the system.
732 LOG_DEBUG("JTAG reset with TLR instead of TRST");
735 } else if (jtag_trst
!= new_trst
) {
736 jtag_trst
= new_trst
;
738 LOG_DEBUG("TRST line asserted");
739 tap_set_state(TAP_RESET
);
740 if (jtag_ntrst_assert_width
)
741 jtag_add_sleep(jtag_ntrst_assert_width
* 1000);
743 LOG_DEBUG("TRST line released");
744 if (jtag_ntrst_delay
)
745 jtag_add_sleep(jtag_ntrst_delay
* 1000);
747 /* We just asserted nTRST, so we're now in TAP_RESET.
748 * Inform possible listeners about this, now that
749 * JTAG instructions and data can be shifted. This
750 * sequence must match jtag_add_tlr().
752 jtag_call_event_callbacks(JTAG_TRST_ASSERTED
);
753 jtag_notify_event(JTAG_TRST_ASSERTED
);
758 void jtag_add_sleep(uint32_t us
)
760 /** @todo Here, keep_alive() appears to be a layering violation!!! */
762 jtag_set_error(interface_jtag_add_sleep(us
));
765 static int jtag_check_value_inner(uint8_t *captured
, uint8_t *in_check_value
,
766 uint8_t *in_check_mask
, int num_bits
)
768 int retval
= ERROR_OK
;
772 compare_failed
= buf_cmp_mask(captured
, in_check_value
, in_check_mask
, num_bits
);
774 compare_failed
= buf_cmp(captured
, in_check_value
, num_bits
);
776 if (compare_failed
) {
777 char *captured_str
, *in_check_value_str
;
778 int bits
= (num_bits
> DEBUG_JTAG_IOZ
) ? DEBUG_JTAG_IOZ
: num_bits
;
780 /* NOTE: we've lost diagnostic context here -- 'which tap' */
782 captured_str
= buf_to_str(captured
, bits
, 16);
783 in_check_value_str
= buf_to_str(in_check_value
, bits
, 16);
785 LOG_WARNING("Bad value '%s' captured during DR or IR scan:",
787 LOG_WARNING(" check_value: 0x%s", in_check_value_str
);
790 free(in_check_value_str
);
793 char *in_check_mask_str
;
795 in_check_mask_str
= buf_to_str(in_check_mask
, bits
, 16);
796 LOG_WARNING(" check_mask: 0x%s", in_check_mask_str
);
797 free(in_check_mask_str
);
800 retval
= ERROR_JTAG_QUEUE_FAILED
;
805 void jtag_check_value_mask(struct scan_field
*field
, uint8_t *value
, uint8_t *mask
)
807 assert(field
->in_value
!= NULL
);
810 /* no checking to do */
814 jtag_execute_queue_noclear();
816 int retval
= jtag_check_value_inner(field
->in_value
, value
, mask
, field
->num_bits
);
817 jtag_set_error(retval
);
820 int default_interface_jtag_execute_queue(void)
823 LOG_ERROR("No JTAG interface configured yet. "
824 "Issue 'init' command in startup scripts "
825 "before communicating with targets.");
829 return jtag
->execute_queue();
832 void jtag_execute_queue_noclear(void)
834 jtag_flush_queue_count
++;
835 jtag_set_error(interface_jtag_execute_queue());
837 if (jtag_flush_queue_sleep
> 0) {
838 /* For debug purposes it can be useful to test performance
839 * or behavior when delaying after flushing the queue,
840 * e.g. to simulate long roundtrip times.
842 usleep(jtag_flush_queue_sleep
* 1000);
846 int jtag_get_flush_queue_count(void)
848 return jtag_flush_queue_count
;
851 int jtag_execute_queue(void)
853 jtag_execute_queue_noclear();
854 return jtag_error_clear();
857 static int jtag_reset_callback(enum jtag_event event
, void *priv
)
859 struct jtag_tap
*tap
= priv
;
861 if (event
== JTAG_TRST_ASSERTED
) {
862 tap
->enabled
= !tap
->disabled_after_reset
;
864 /* current instruction is either BYPASS or IDCODE */
865 buf_set_ones(tap
->cur_instr
, tap
->ir_length
);
872 /* sleep at least us microseconds. When we sleep more than 1000ms we
873 * do an alive sleep, i.e. keep GDB alive. Note that we could starve
874 * GDB if we slept for <1000ms many times.
876 void jtag_sleep(uint32_t us
)
881 alive_sleep((us
+999)/1000);
884 /* Maximum number of enabled JTAG devices we expect in the scan chain,
885 * plus one (to detect garbage at the end). Devices that don't support
886 * IDCODE take up fewer bits, possibly allowing a few more devices.
888 #define JTAG_MAX_CHAIN_SIZE 20
890 #define EXTRACT_MFG(X) (((X) & 0xffe) >> 1)
891 #define EXTRACT_PART(X) (((X) & 0xffff000) >> 12)
892 #define EXTRACT_VER(X) (((X) & 0xf0000000) >> 28)
894 /* A reserved manufacturer ID is used in END_OF_CHAIN_FLAG, so we
895 * know that no valid TAP will have it as an IDCODE value.
897 #define END_OF_CHAIN_FLAG 0xffffffff
899 /* a larger IR length than we ever expect to autoprobe */
900 #define JTAG_IRLEN_MAX 60
902 static int jtag_examine_chain_execute(uint8_t *idcode_buffer
, unsigned num_idcode
)
904 struct scan_field field
= {
905 .num_bits
= num_idcode
* 32,
906 .out_value
= idcode_buffer
,
907 .in_value
= idcode_buffer
,
910 /* initialize to the end of chain ID value */
911 for (unsigned i
= 0; i
< JTAG_MAX_CHAIN_SIZE
; i
++)
912 buf_set_u32(idcode_buffer
, i
* 32, 32, END_OF_CHAIN_FLAG
);
914 jtag_add_plain_dr_scan(field
.num_bits
, field
.out_value
, field
.in_value
, TAP_DRPAUSE
);
916 return jtag_execute_queue();
919 static bool jtag_examine_chain_check(uint8_t *idcodes
, unsigned count
)
921 uint8_t zero_check
= 0x0;
922 uint8_t one_check
= 0xff;
924 for (unsigned i
= 0; i
< count
* 4; i
++) {
925 zero_check
|= idcodes
[i
];
926 one_check
&= idcodes
[i
];
929 /* if there wasn't a single non-zero bit or if all bits were one,
930 * the scan is not valid. We wrote a mix of both values; either
932 * - There's a hardware issue (almost certainly):
933 * + all-zeroes can mean a target stuck in JTAG reset
934 * + all-ones tends to mean no target
935 * - The scan chain is WAY longer than we can handle, *AND* either
936 * + there are several hundreds of TAPs in bypass, or
937 * + at least a few dozen TAPs all have an all-ones IDCODE
939 if (zero_check
== 0x00 || one_check
== 0xff) {
940 LOG_ERROR("JTAG scan chain interrogation failed: all %s",
941 (zero_check
== 0x00) ? "zeroes" : "ones");
942 LOG_ERROR("Check JTAG interface, timings, target power, etc.");
948 static void jtag_examine_chain_display(enum log_levels level
, const char *msg
,
949 const char *name
, uint32_t idcode
)
951 log_printf_lf(level
, __FILE__
, __LINE__
, __func__
,
952 "JTAG tap: %s %16.16s: 0x%08x "
953 "(mfg: 0x%3.3x, part: 0x%4.4x, ver: 0x%1.1x)",
955 (unsigned int)idcode
,
956 (unsigned int)EXTRACT_MFG(idcode
),
957 (unsigned int)EXTRACT_PART(idcode
),
958 (unsigned int)EXTRACT_VER(idcode
));
961 static bool jtag_idcode_is_final(uint32_t idcode
)
964 * Some devices, such as AVR8, will output all 1's instead
965 * of TDI input value at end of chain. Allow those values
966 * instead of failing.
968 return idcode
== END_OF_CHAIN_FLAG
;
972 * This helper checks that remaining bits in the examined chain data are
973 * all as expected, but a single JTAG device requires only 64 bits to be
974 * read back correctly. This can help identify and diagnose problems
975 * with the JTAG chain earlier, gives more helpful/explicit error messages.
976 * Returns TRUE iff garbage was found.
978 static bool jtag_examine_chain_end(uint8_t *idcodes
, unsigned count
, unsigned max
)
980 bool triggered
= false;
981 for (; count
< max
- 31; count
+= 32) {
982 uint32_t idcode
= buf_get_u32(idcodes
, count
, 32);
984 /* do not trigger the warning if the data looks good */
985 if (jtag_idcode_is_final(idcode
))
987 LOG_WARNING("Unexpected idcode after end of chain: %d 0x%08x",
988 count
, (unsigned int)idcode
);
994 static bool jtag_examine_chain_match_tap(const struct jtag_tap
*tap
)
996 uint32_t idcode
= tap
->idcode
;
998 /* ignore expected BYPASS codes; warn otherwise */
999 if (0 == tap
->expected_ids_cnt
&& !idcode
)
1002 /* optionally ignore the JTAG version field - bits 28-31 of IDCODE */
1003 uint32_t mask
= tap
->ignore_version
? ~(0xf << 28) : ~0;
1007 /* Loop over the expected identification codes and test for a match */
1008 unsigned ii
, limit
= tap
->expected_ids_cnt
;
1010 for (ii
= 0; ii
< limit
; ii
++) {
1011 uint32_t expected
= tap
->expected_ids
[ii
] & mask
;
1013 if (idcode
== expected
)
1016 /* treat "-expected-id 0" as a "don't-warn" wildcard */
1017 if (0 == tap
->expected_ids
[ii
])
1021 /* If none of the expected ids matched, warn */
1022 jtag_examine_chain_display(LOG_LVL_WARNING
, "UNEXPECTED",
1023 tap
->dotted_name
, tap
->idcode
);
1024 for (ii
= 0; ii
< limit
; ii
++) {
1027 snprintf(msg
, sizeof(msg
), "expected %u of %u", ii
+ 1, limit
);
1028 jtag_examine_chain_display(LOG_LVL_ERROR
, msg
,
1029 tap
->dotted_name
, tap
->expected_ids
[ii
]);
1034 /* Try to examine chain layout according to IEEE 1149.1 §12
1035 * This is called a "blind interrogation" of the scan chain.
1037 static int jtag_examine_chain(void)
1039 uint8_t idcode_buffer
[JTAG_MAX_CHAIN_SIZE
* 4];
1043 bool autoprobe
= false;
1045 /* DR scan to collect BYPASS or IDCODE register contents.
1046 * Then make sure the scan data has both ones and zeroes.
1048 LOG_DEBUG("DR scan interrogation for IDCODE/BYPASS");
1049 retval
= jtag_examine_chain_execute(idcode_buffer
, JTAG_MAX_CHAIN_SIZE
);
1050 if (retval
!= ERROR_OK
)
1052 if (!jtag_examine_chain_check(idcode_buffer
, JTAG_MAX_CHAIN_SIZE
))
1053 return ERROR_JTAG_INIT_FAILED
;
1055 /* point at the 1st tap */
1056 struct jtag_tap
*tap
= jtag_tap_next_enabled(NULL
);
1062 tap
&& bit_count
< (JTAG_MAX_CHAIN_SIZE
* 32) - 31;
1063 tap
= jtag_tap_next_enabled(tap
)) {
1064 uint32_t idcode
= buf_get_u32(idcode_buffer
, bit_count
, 32);
1066 if ((idcode
& 1) == 0) {
1067 /* Zero for LSB indicates a device in bypass */
1068 LOG_INFO("TAP %s does not have IDCODE",
1071 tap
->hasidcode
= false;
1075 /* Friendly devices support IDCODE */
1076 tap
->hasidcode
= true;
1077 jtag_examine_chain_display(LOG_LVL_INFO
,
1079 tap
->dotted_name
, idcode
);
1083 tap
->idcode
= idcode
;
1085 /* ensure the TAP ID matches what was expected */
1086 if (!jtag_examine_chain_match_tap(tap
))
1087 retval
= ERROR_JTAG_INIT_SOFT_FAIL
;
1090 /* Fail if too many TAPs were enabled for us to verify them all. */
1092 LOG_ERROR("Too many TAPs enabled; '%s' ignored.",
1094 return ERROR_JTAG_INIT_FAILED
;
1097 /* if autoprobing, the tap list is still empty ... populate it! */
1098 while (autoprobe
&& bit_count
< (JTAG_MAX_CHAIN_SIZE
* 32) - 31) {
1102 /* Is there another TAP? */
1103 idcode
= buf_get_u32(idcode_buffer
, bit_count
, 32);
1104 if (jtag_idcode_is_final(idcode
))
1107 /* Default everything in this TAP except IR length.
1109 * REVISIT create a jtag_alloc(chip, tap) routine, and
1110 * share it with jim_newtap_cmd().
1112 tap
= calloc(1, sizeof *tap
);
1116 sprintf(buf
, "auto%d", tapcount
++);
1117 tap
->chip
= strdup(buf
);
1118 tap
->tapname
= strdup("tap");
1120 sprintf(buf
, "%s.%s", tap
->chip
, tap
->tapname
);
1121 tap
->dotted_name
= strdup(buf
);
1123 /* tap->ir_length == 0 ... signifying irlen autoprobe */
1124 tap
->ir_capture_mask
= 0x03;
1125 tap
->ir_capture_value
= 0x01;
1127 tap
->enabled
= true;
1129 if ((idcode
& 1) == 0) {
1131 tap
->hasidcode
= false;
1134 tap
->hasidcode
= true;
1135 tap
->idcode
= idcode
;
1137 tap
->expected_ids_cnt
= 1;
1138 tap
->expected_ids
= malloc(sizeof(uint32_t));
1139 tap
->expected_ids
[0] = idcode
;
1142 LOG_WARNING("AUTO %s - use \"jtag newtap "
1143 "%s %s -expected-id 0x%8.8" PRIx32
" ...\"",
1144 tap
->dotted_name
, tap
->chip
, tap
->tapname
,
1150 /* After those IDCODE or BYPASS register values should be
1151 * only the data we fed into the scan chain.
1153 if (jtag_examine_chain_end(idcode_buffer
, bit_count
,
1154 8 * sizeof(idcode_buffer
))) {
1155 LOG_ERROR("double-check your JTAG setup (interface, "
1156 "speed, missing TAPs, ...)");
1157 return ERROR_JTAG_INIT_FAILED
;
1160 /* Return success or, for backwards compatibility if only
1161 * some IDCODE values mismatched, a soft/continuable fault.
1167 * Validate the date loaded by entry to the Capture-IR state, to help
1168 * find errors related to scan chain configuration (wrong IR lengths)
1171 * Entry state can be anything. On non-error exit, all TAPs are in
1172 * bypass mode. On error exits, the scan chain is reset.
1174 static int jtag_validate_ircapture(void)
1176 struct jtag_tap
*tap
;
1177 int total_ir_length
= 0;
1178 uint8_t *ir_test
= NULL
;
1179 struct scan_field field
;
1184 /* when autoprobing, accomodate huge IR lengths */
1185 for (tap
= NULL
, total_ir_length
= 0;
1186 (tap
= jtag_tap_next_enabled(tap
)) != NULL
;
1187 total_ir_length
+= tap
->ir_length
) {
1188 if (tap
->ir_length
== 0)
1189 total_ir_length
+= JTAG_IRLEN_MAX
;
1192 /* increase length to add 2 bit sentinel after scan */
1193 total_ir_length
+= 2;
1195 ir_test
= malloc(DIV_ROUND_UP(total_ir_length
, 8));
1196 if (ir_test
== NULL
)
1199 /* after this scan, all TAPs will capture BYPASS instructions */
1200 buf_set_ones(ir_test
, total_ir_length
);
1202 field
.num_bits
= total_ir_length
;
1203 field
.out_value
= ir_test
;
1204 field
.in_value
= ir_test
;
1206 jtag_add_plain_ir_scan(field
.num_bits
, field
.out_value
, field
.in_value
, TAP_IDLE
);
1208 LOG_DEBUG("IR capture validation scan");
1209 retval
= jtag_execute_queue();
1210 if (retval
!= ERROR_OK
)
1217 tap
= jtag_tap_next_enabled(tap
);
1221 /* If we're autoprobing, guess IR lengths. They must be at
1222 * least two bits. Guessing will fail if (a) any TAP does
1223 * not conform to the JTAG spec; or (b) when the upper bits
1224 * captured from some conforming TAP are nonzero. Or if
1225 * (c) an IR length is longer than 32 bits -- which is only
1226 * an implementation limit, which could someday be raised.
1228 * REVISIT optimization: if there's a *single* TAP we can
1229 * lift restrictions (a) and (b) by scanning a recognizable
1230 * pattern before the all-ones BYPASS. Check for where the
1231 * pattern starts in the result, instead of an 0...01 value.
1233 * REVISIT alternative approach: escape to some tcl code
1234 * which could provide more knowledge, based on IDCODE; and
1235 * only guess when that has no success.
1237 if (tap
->ir_length
== 0) {
1239 while ((val
= buf_get_u32(ir_test
, chain_pos
, tap
->ir_length
+ 1)) == 1
1240 && tap
->ir_length
<= 32) {
1243 LOG_WARNING("AUTO %s - use \"... -irlen %d\"",
1244 jtag_tap_name(tap
), tap
->ir_length
);
1247 /* Validate the two LSBs, which must be 01 per JTAG spec.
1249 * Or ... more bits could be provided by TAP declaration.
1250 * Plus, some taps (notably in i.MX series chips) violate
1251 * this part of the JTAG spec, so their capture mask/value
1252 * attributes might disable this test.
1254 val
= buf_get_u32(ir_test
, chain_pos
, tap
->ir_length
);
1255 if ((val
& tap
->ir_capture_mask
) != tap
->ir_capture_value
) {
1256 LOG_ERROR("%s: IR capture error; saw 0x%0*x not 0x%0*x",
1258 (tap
->ir_length
+ 7) / tap
->ir_length
,
1260 (tap
->ir_length
+ 7) / tap
->ir_length
,
1261 (unsigned) tap
->ir_capture_value
);
1263 retval
= ERROR_JTAG_INIT_FAILED
;
1266 LOG_DEBUG("%s: IR capture 0x%0*x", jtag_tap_name(tap
),
1267 (tap
->ir_length
+ 7) / tap
->ir_length
, val
);
1268 chain_pos
+= tap
->ir_length
;
1271 /* verify the '11' sentinel we wrote is returned at the end */
1272 val
= buf_get_u32(ir_test
, chain_pos
, 2);
1274 char *cbuf
= buf_to_str(ir_test
, total_ir_length
, 16);
1276 LOG_ERROR("IR capture error at bit %d, saw 0x%s not 0x...3",
1279 retval
= ERROR_JTAG_INIT_FAILED
;
1284 if (retval
!= ERROR_OK
) {
1286 jtag_execute_queue();
1291 void jtag_tap_init(struct jtag_tap
*tap
)
1293 unsigned ir_len_bits
;
1294 unsigned ir_len_bytes
;
1296 /* if we're autoprobing, cope with potentially huge ir_length */
1297 ir_len_bits
= tap
->ir_length
? : JTAG_IRLEN_MAX
;
1298 ir_len_bytes
= DIV_ROUND_UP(ir_len_bits
, 8);
1300 tap
->expected
= calloc(1, ir_len_bytes
);
1301 tap
->expected_mask
= calloc(1, ir_len_bytes
);
1302 tap
->cur_instr
= malloc(ir_len_bytes
);
1304 /** @todo cope better with ir_length bigger than 32 bits */
1305 if (ir_len_bits
> 32)
1308 buf_set_u32(tap
->expected
, 0, ir_len_bits
, tap
->ir_capture_value
);
1309 buf_set_u32(tap
->expected_mask
, 0, ir_len_bits
, tap
->ir_capture_mask
);
1311 /* TAP will be in bypass mode after jtag_validate_ircapture() */
1313 buf_set_ones(tap
->cur_instr
, tap
->ir_length
);
1315 /* register the reset callback for the TAP */
1316 jtag_register_event_callback(&jtag_reset_callback
, tap
);
1319 LOG_DEBUG("Created Tap: %s @ abs position %d, "
1320 "irlen %d, capture: 0x%x mask: 0x%x", tap
->dotted_name
,
1321 tap
->abs_chain_position
, tap
->ir_length
,
1322 (unsigned) tap
->ir_capture_value
,
1323 (unsigned) tap
->ir_capture_mask
);
1326 void jtag_tap_free(struct jtag_tap
*tap
)
1328 jtag_unregister_event_callback(&jtag_reset_callback
, tap
);
1330 /** @todo is anything missing? no memory leaks please */
1331 free((void *)tap
->expected
);
1332 free((void *)tap
->expected_ids
);
1333 free((void *)tap
->chip
);
1334 free((void *)tap
->tapname
);
1335 free((void *)tap
->dotted_name
);
1340 * Do low-level setup like initializing registers, output signals,
1343 int adapter_init(struct command_context
*cmd_ctx
)
1348 if (!jtag_interface
) {
1349 /* nothing was previously specified by "interface" command */
1350 LOG_ERROR("Debug Adapter has to be specified, "
1351 "see \"interface\" command");
1352 return ERROR_JTAG_INVALID_INTERFACE
;
1356 retval
= jtag_interface
->init();
1357 if (retval
!= ERROR_OK
)
1359 jtag
= jtag_interface
;
1361 /* LEGACY SUPPORT ... adapter drivers must declare what
1362 * transports they allow. Until they all do so, assume
1363 * the legacy drivers are JTAG-only
1365 if (!transports_are_declared()) {
1366 LOG_ERROR("Adapter driver '%s' did not declare "
1367 "which transports it allows; assuming "
1368 "JTAG-only", jtag
->name
);
1369 retval
= allow_transports(cmd_ctx
, jtag_only
);
1370 if (retval
!= ERROR_OK
)
1374 if (CLOCK_MODE_UNSELECTED
== clock_mode
) {
1375 LOG_ERROR("An adapter speed is not selected in the init script."
1376 " Insert a call to adapter_khz or jtag_rclk to proceed.");
1377 return ERROR_JTAG_INIT_FAILED
;
1380 int requested_khz
= jtag_get_speed_khz();
1381 int actual_khz
= requested_khz
;
1382 int jtag_speed_var
= 0;
1383 retval
= jtag_get_speed(&jtag_speed_var
);
1384 if (retval
!= ERROR_OK
)
1386 retval
= jtag
->speed(jtag_speed_var
);
1387 if (retval
!= ERROR_OK
)
1389 retval
= jtag_get_speed_readable(&actual_khz
);
1390 if (ERROR_OK
!= retval
)
1391 LOG_INFO("adapter-specific clock speed value %d", jtag_speed_var
);
1392 else if (actual_khz
) {
1393 /* Adaptive clocking -- JTAG-specific */
1394 if ((CLOCK_MODE_RCLK
== clock_mode
)
1395 || ((CLOCK_MODE_KHZ
== clock_mode
) && !requested_khz
)) {
1396 LOG_INFO("RCLK (adaptive clock speed) not supported - fallback to %d kHz"
1399 LOG_INFO("clock speed %d kHz", actual_khz
);
1401 LOG_INFO("RCLK (adaptive clock speed)");
1406 int jtag_init_inner(struct command_context
*cmd_ctx
)
1408 struct jtag_tap
*tap
;
1410 bool issue_setup
= true;
1412 LOG_DEBUG("Init JTAG chain");
1414 tap
= jtag_tap_next_enabled(NULL
);
1416 /* Once JTAG itself is properly set up, and the scan chain
1417 * isn't absurdly large, IDCODE autoprobe should work fine.
1419 * But ... IRLEN autoprobe can fail even on systems which
1420 * are fully conformant to JTAG. Also, JTAG setup can be
1421 * quite finicky on some systems.
1423 * REVISIT: if TAP autoprobe works OK, then in many cases
1424 * we could escape to tcl code and set up targets based on
1425 * the TAP's IDCODE values.
1427 LOG_WARNING("There are no enabled taps. "
1428 "AUTO PROBING MIGHT NOT WORK!!");
1430 /* REVISIT default clock will often be too fast ... */
1434 retval
= jtag_execute_queue();
1435 if (retval
!= ERROR_OK
)
1438 /* Examine DR values first. This discovers problems which will
1439 * prevent communication ... hardware issues like TDO stuck, or
1440 * configuring the wrong number of (enabled) TAPs.
1442 retval
= jtag_examine_chain();
1445 /* complete success */
1448 /* For backward compatibility reasons, try coping with
1449 * configuration errors involving only ID mismatches.
1450 * We might be able to talk to the devices.
1452 * Also the device might be powered down during startup.
1454 * After OpenOCD starts, we can try to power on the device
1457 LOG_ERROR("Trying to use configured scan chain anyway...");
1458 issue_setup
= false;
1462 /* Now look at IR values. Problems here will prevent real
1463 * communication. They mostly mean that the IR length is
1464 * wrong ... or that the IR capture value is wrong. (The
1465 * latter is uncommon, but easily worked around: provide
1466 * ircapture/irmask values during TAP setup.)
1468 retval
= jtag_validate_ircapture();
1469 if (retval
!= ERROR_OK
) {
1470 /* The target might be powered down. The user
1471 * can power it up and reset it after firing
1474 issue_setup
= false;
1478 jtag_notify_event(JTAG_TAP_EVENT_SETUP
);
1480 LOG_WARNING("Bypassing JTAG setup events due to errors");
1486 int adapter_quit(void)
1488 if (!jtag
|| !jtag
->quit
)
1491 /* close the JTAG interface */
1492 int result
= jtag
->quit();
1493 if (ERROR_OK
!= result
)
1494 LOG_ERROR("failed: %d", result
);
1499 int swd_init_reset(struct command_context
*cmd_ctx
)
1501 int retval
= adapter_init(cmd_ctx
);
1502 if (retval
!= ERROR_OK
)
1505 LOG_DEBUG("Initializing with hard SRST reset");
1507 if (jtag_reset_config
& RESET_HAS_SRST
)
1510 retval
= jtag_execute_queue();
1514 int jtag_init_reset(struct command_context
*cmd_ctx
)
1516 int retval
= adapter_init(cmd_ctx
);
1517 if (retval
!= ERROR_OK
)
1520 LOG_DEBUG("Initializing with hard TRST+SRST reset");
1523 * This procedure is used by default when OpenOCD triggers a reset.
1524 * It's now done through an overridable Tcl "init_reset" wrapper.
1526 * This started out as a more powerful "get JTAG working" reset than
1527 * jtag_init_inner(), applying TRST because some chips won't activate
1528 * JTAG without a TRST cycle (presumed to be async, though some of
1529 * those chips synchronize JTAG activation using TCK).
1531 * But some chips only activate JTAG as part of an SRST cycle; SRST
1532 * got mixed in. So it became a hard reset routine, which got used
1533 * in more places, and which coped with JTAG reset being forced as
1534 * part of SRST (srst_pulls_trst).
1536 * And even more corner cases started to surface: TRST and/or SRST
1537 * assertion timings matter; some chips need other JTAG operations;
1538 * TRST/SRST sequences can need to be different from these, etc.
1540 * Systems should override that wrapper to support system-specific
1541 * requirements that this not-fully-generic code doesn't handle.
1543 * REVISIT once Tcl code can read the reset_config modes, this won't
1544 * need to be a C routine at all...
1546 jtag_add_reset(1, 0); /* TAP_RESET, using TMS+TCK or TRST */
1547 if (jtag_reset_config
& RESET_HAS_SRST
) {
1548 jtag_add_reset(1, 1);
1549 if ((jtag_reset_config
& RESET_SRST_PULLS_TRST
) == 0)
1550 jtag_add_reset(0, 1);
1552 jtag_add_reset(0, 0);
1553 retval
= jtag_execute_queue();
1554 if (retval
!= ERROR_OK
)
1557 /* Check that we can communication on the JTAG chain + eventually we want to
1558 * be able to perform enumeration only after OpenOCD has started
1559 * telnet and GDB server
1561 * That would allow users to more easily perform any magic they need to before
1564 return jtag_init_inner(cmd_ctx
);
1567 int jtag_init(struct command_context
*cmd_ctx
)
1569 int retval
= adapter_init(cmd_ctx
);
1570 if (retval
!= ERROR_OK
)
1573 /* guard against oddball hardware: force resets to be inactive */
1574 jtag_add_reset(0, 0);
1575 retval
= jtag_execute_queue();
1576 if (retval
!= ERROR_OK
)
1579 if (Jim_Eval_Named(cmd_ctx
->interp
, "jtag_init", __FILE__
, __LINE__
) != JIM_OK
)
1585 unsigned jtag_get_speed_khz(void)
1590 static int adapter_khz_to_speed(unsigned khz
, int *speed
)
1592 LOG_DEBUG("convert khz to interface specific speed value");
1595 LOG_DEBUG("have interface set up");
1597 int retval
= jtag
->khz(jtag_get_speed_khz(), &speed_div1
);
1598 if (ERROR_OK
!= retval
)
1600 *speed
= speed_div1
;
1605 static int jtag_rclk_to_speed(unsigned fallback_speed_khz
, int *speed
)
1607 int retval
= adapter_khz_to_speed(0, speed
);
1608 if ((ERROR_OK
!= retval
) && fallback_speed_khz
) {
1609 LOG_DEBUG("trying fallback speed...");
1610 retval
= adapter_khz_to_speed(fallback_speed_khz
, speed
);
1615 static int jtag_set_speed(int speed
)
1618 /* this command can be called during CONFIG,
1619 * in which case jtag isn't initialized */
1620 return jtag
? jtag
->speed(speed
) : ERROR_OK
;
1623 int jtag_config_khz(unsigned khz
)
1625 LOG_DEBUG("handle jtag khz");
1626 clock_mode
= CLOCK_MODE_KHZ
;
1628 int retval
= adapter_khz_to_speed(khz
, &speed
);
1629 return (ERROR_OK
!= retval
) ? retval
: jtag_set_speed(speed
);
1632 int jtag_config_rclk(unsigned fallback_speed_khz
)
1634 LOG_DEBUG("handle jtag rclk");
1635 clock_mode
= CLOCK_MODE_RCLK
;
1636 rclk_fallback_speed_khz
= fallback_speed_khz
;
1638 int retval
= jtag_rclk_to_speed(fallback_speed_khz
, &speed
);
1639 return (ERROR_OK
!= retval
) ? retval
: jtag_set_speed(speed
);
1642 int jtag_get_speed(int *speed
)
1644 switch (clock_mode
) {
1645 case CLOCK_MODE_KHZ
:
1646 adapter_khz_to_speed(jtag_get_speed_khz(), speed
);
1648 case CLOCK_MODE_RCLK
:
1649 jtag_rclk_to_speed(rclk_fallback_speed_khz
, speed
);
1652 LOG_ERROR("BUG: unknown jtag clock mode");
1658 int jtag_get_speed_readable(int *khz
)
1660 int jtag_speed_var
= 0;
1661 int retval
= jtag_get_speed(&jtag_speed_var
);
1662 if (retval
!= ERROR_OK
)
1664 return jtag
? jtag
->speed_div(jtag_speed_var
, khz
) : ERROR_OK
;
1667 void jtag_set_verify(bool enable
)
1669 jtag_verify
= enable
;
1672 bool jtag_will_verify()
1677 void jtag_set_verify_capture_ir(bool enable
)
1679 jtag_verify_capture_ir
= enable
;
1682 bool jtag_will_verify_capture_ir()
1684 return jtag_verify_capture_ir
;
1687 int jtag_power_dropout(int *dropout
)
1690 /* TODO: as the jtag interface is not valid all
1691 * we can do at the moment is exit OpenOCD */
1692 LOG_ERROR("No Valid JTAG Interface Configured.");
1695 return jtag
->power_dropout(dropout
);
1698 int jtag_srst_asserted(int *srst_asserted
)
1700 return jtag
->srst_asserted(srst_asserted
);
1703 enum reset_types
jtag_get_reset_config(void)
1705 return jtag_reset_config
;
1707 void jtag_set_reset_config(enum reset_types type
)
1709 jtag_reset_config
= type
;
1712 int jtag_get_trst(void)
1716 int jtag_get_srst(void)
1721 void jtag_set_nsrst_delay(unsigned delay
)
1723 adapter_nsrst_delay
= delay
;
1725 unsigned jtag_get_nsrst_delay(void)
1727 return adapter_nsrst_delay
;
1729 void jtag_set_ntrst_delay(unsigned delay
)
1731 jtag_ntrst_delay
= delay
;
1733 unsigned jtag_get_ntrst_delay(void)
1735 return jtag_ntrst_delay
;
1739 void jtag_set_nsrst_assert_width(unsigned delay
)
1741 adapter_nsrst_assert_width
= delay
;
1743 unsigned jtag_get_nsrst_assert_width(void)
1745 return adapter_nsrst_assert_width
;
1747 void jtag_set_ntrst_assert_width(unsigned delay
)
1749 jtag_ntrst_assert_width
= delay
;
1751 unsigned jtag_get_ntrst_assert_width(void)
1753 return jtag_ntrst_assert_width
;
1756 static int jtag_select(struct command_context
*ctx
)
1760 /* NOTE: interface init must already have been done.
1761 * That works with only C code ... no Tcl glue required.
1764 retval
= jtag_register_commands(ctx
);
1766 if (retval
!= ERROR_OK
)
1769 retval
= svf_register_commands(ctx
);
1771 if (retval
!= ERROR_OK
)
1774 return xsvf_register_commands(ctx
);
1777 static struct transport jtag_transport
= {
1779 .select
= jtag_select
,
1783 static void jtag_constructor(void) __attribute__((constructor
));
1784 static void jtag_constructor(void)
1786 transport_register(&jtag_transport
);
1789 /** Returns true if the current debug session
1790 * is using JTAG as its transport.
1792 bool transport_is_jtag(void)
1794 return get_current_transport() == &jtag_transport
;
1797 void adapter_assert_reset(void)
1799 if (transport_is_jtag()) {
1800 if (jtag_reset_config
& RESET_SRST_PULLS_TRST
)
1801 jtag_add_reset(1, 1);
1803 jtag_add_reset(0, 1);
1804 } else if (transport_is_swd())
1806 else if (get_current_transport() != NULL
)
1807 LOG_ERROR("reset is not supported on %s",
1808 get_current_transport()->name
);
1810 LOG_ERROR("transport is not selected");
1813 void adapter_deassert_reset(void)
1815 if (transport_is_jtag())
1816 jtag_add_reset(0, 0);
1817 else if (transport_is_swd())
1819 else if (get_current_transport() != NULL
)
1820 LOG_ERROR("reset is not supported on %s",
1821 get_current_transport()->name
);
1823 LOG_ERROR("transport is not selected");