1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * Copyright (C) 2007-2010 Øyvind Harboe *
6 * oyvind.harboe@zylin.com *
8 * Copyright (C) 2008 by Spencer Oliver *
9 * spen@spen-soft.co.uk *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program; if not, write to the *
23 * Free Software Foundation, Inc., *
24 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
25 ***************************************************************************/
35 * This holds methods shared between all instances of a given target
36 * type. For example, all Cortex-M3 targets on a scan chain share
37 * the same method table.
41 * Name of this type of target. Do @b not access this
42 * field directly, use target_type_name() instead.
45 const char *deprecated_name
;
47 /* poll current target status */
48 int (*poll
)(struct target
*target
);
49 /* Invoked only from target_arch_state().
50 * Issue USER() w/architecture specific status. */
51 int (*arch_state
)(struct target
*target
);
53 /* target request support */
54 int (*target_request_data
)(struct target
*target
, uint32_t size
, uint8_t *buffer
);
56 /* halt will log a warning, but return ERROR_OK if the target is already halted. */
57 int (*halt
)(struct target
*target
);
58 int (*resume
)(struct target
*target
, int current
, uint32_t address
,
59 int handle_breakpoints
, int debug_execution
);
60 int (*step
)(struct target
*target
, int current
, uint32_t address
,
61 int handle_breakpoints
);
63 /* target reset control. assert reset can be invoked when OpenOCD and
64 * the target is out of sync.
66 * A typical example is that the target was power cycled while OpenOCD
67 * thought the target was halted or running.
69 * assert_reset() can therefore make no assumptions whatsoever about the
72 * Before assert_reset() for the target is invoked, a TRST/tms and
73 * chain validation is executed. TRST should not be asserted
74 * during target assert unless there is no way around it due to
75 * the way reset's are configured.
78 int (*assert_reset
)(struct target
*target
);
80 * The implementation is responsible for polling the
81 * target such that target->state reflects the
84 * Otherwise the following would fail, as there will not
85 * be any "poll" invoked inbetween the "reset run" and
90 int (*deassert_reset
)(struct target
*target
);
91 int (*soft_reset_halt
)(struct target
*target
);
94 * Target register access for GDB. Do @b not call this function
95 * directly, use target_get_gdb_reg_list() instead.
97 * Danger! this function will succeed even if the target is running
98 * and return a register list with dummy values.
100 * The reason is that GDB connection will fail without a valid register
101 * list, however it is after GDB is connected that monitor commands can
102 * be run to properly initialize the target
104 int (*get_gdb_reg_list
)(struct target
*target
, struct reg
**reg_list
[], int *reg_list_size
);
106 /* target memory access
107 * size: 1 = byte (8bit), 2 = half-word (16bit), 4 = word (32bit)
108 * count: number of items of <size>
112 * Target memory read callback. Do @b not call this function
113 * directly, use target_read_memory() instead.
115 int (*read_memory
)(struct target
*target
, uint32_t address
,
116 uint32_t size
, uint32_t count
, uint8_t *buffer
);
118 * Target memory write callback. Do @b not call this function
119 * directly, use target_write_memory() instead.
121 int (*write_memory
)(struct target
*target
, uint32_t address
,
122 uint32_t size
, uint32_t count
, const uint8_t *buffer
);
124 /* Default implementation will do some fancy alignment to improve performance, target can override */
125 int (*read_buffer
)(struct target
*target
, uint32_t address
,
126 uint32_t size
, uint8_t *buffer
);
128 /* Default implementation will do some fancy alignment to improve performance, target can override */
129 int (*write_buffer
)(struct target
*target
, uint32_t address
,
130 uint32_t size
, const uint8_t *buffer
);
133 * Write target memory in multiples of 4 bytes, optimized for
134 * writing large quantities of data. Do @b not call this
135 * function directly, use target_bulk_write_memory() instead.
137 int (*bulk_write_memory
)(struct target
*target
, uint32_t address
,
138 uint32_t count
, const uint8_t *buffer
);
140 int (*checksum_memory
)(struct target
*target
, uint32_t address
,
141 uint32_t count
, uint32_t *checksum
);
142 int (*blank_check_memory
)(struct target
*target
, uint32_t address
,
143 uint32_t count
, uint32_t *blank
);
146 * target break-/watchpoint control
147 * rw: 0 = write, 1 = read, 2 = access
149 * Target must be halted while this is invoked as this
150 * will actually set up breakpoints on target.
152 * The breakpoint hardware will be set up upon adding the
155 * Upon GDB connection all breakpoints/watchpoints are cleared.
157 int (*add_breakpoint
)(struct target
*target
, struct breakpoint
*breakpoint
);
158 int (*add_context_breakpoint
)(struct target
*target
, struct breakpoint
*breakpoint
);
159 int (*add_hybrid_breakpoint
)(struct target
*target
, struct breakpoint
*breakpoint
);
161 /* remove breakpoint. hw will only be updated if the target
162 * is currently halted.
163 * However, this method can be invoked on unresponsive targets.
165 int (*remove_breakpoint
)(struct target
*target
, struct breakpoint
*breakpoint
);
167 /* add watchpoint ... see add_breakpoint() comment above. */
168 int (*add_watchpoint
)(struct target
*target
, struct watchpoint
*watchpoint
);
170 /* remove watchpoint. hw will only be updated if the target
171 * is currently halted.
172 * However, this method can be invoked on unresponsive targets.
174 int (*remove_watchpoint
)(struct target
*target
, struct watchpoint
*watchpoint
);
177 * Target algorithm support. Do @b not call this method directly,
178 * use target_run_algorithm() instead.
180 int (*run_algorithm
)(struct target
*target
, int num_mem_params
,
181 struct mem_param
*mem_params
, int num_reg_params
,
182 struct reg_param
*reg_param
, uint32_t entry_point
,
183 uint32_t exit_point
, int timeout_ms
, void *arch_info
);
184 int (*start_algorithm
)(struct target
*target
, int num_mem_params
,
185 struct mem_param
*mem_params
, int num_reg_params
,
186 struct reg_param
*reg_param
, uint32_t entry_point
,
187 uint32_t exit_point
, void *arch_info
);
188 int (*wait_algorithm
)(struct target
*target
, int num_mem_params
,
189 struct mem_param
*mem_params
, int num_reg_params
,
190 struct reg_param
*reg_param
, uint32_t exit_point
,
191 int timeout_ms
, void *arch_info
);
193 const struct command_registration
*commands
;
195 /* called when target is created */
196 int (*target_create
)(struct target
*target
, Jim_Interp
*interp
);
198 /* called for various config parameters */
199 /* returns JIM_CONTINUE - if option not understood */
200 /* otherwise: JIM_OK, or JIM_ERR, */
201 int (*target_jim_configure
)(struct target
*target
, Jim_GetOptInfo
*goi
);
203 /* target commands specifically handled by the target */
204 /* returns JIM_OK, or JIM_ERR, or JIM_CONTINUE - if option not understood */
205 int (*target_jim_commands
)(struct target
*target
, Jim_GetOptInfo
*goi
);
208 * This method is used to perform target setup that requires
211 * This may be called multiple times. It is called after the
212 * scan chain is initially validated, or later after the target
213 * is enabled by a JRC. It may also be called during some
214 * parts of the reset sequence.
216 * For one-time initialization tasks, use target_was_examined()
217 * and target_set_examined(). For example, probe the hardware
218 * before setting up chip-specific state, and then set that
219 * flag so you don't do that again.
221 int (*examine
)(struct target
*target
);
223 /* Set up structures for target.
225 * It is illegal to talk to the target at this stage as this fn is invoked
226 * before the JTAG chain has been examined/verified
228 int (*init_target
)(struct command_context
*cmd_ctx
, struct target
*target
);
230 /* translate from virtual to physical address. Default implementation is successful
231 * no-op(i.e. virtual==physical).
233 int (*virt2phys
)(struct target
*target
, uint32_t address
, uint32_t *physical
);
235 /* read directly from physical memory. caches are bypassed and untouched.
237 * If the target does not support disabling caches, leaving them untouched,
238 * then minimally the actual physical memory location will be read even
239 * if cache states are unchanged, flushed, etc.
241 * Default implementation is to call read_memory.
243 int (*read_phys_memory
)(struct target
*target
, uint32_t phys_address
,
244 uint32_t size
, uint32_t count
, uint8_t *buffer
);
247 * same as read_phys_memory, except that it writes...
249 int (*write_phys_memory
)(struct target
*target
, uint32_t phys_address
,
250 uint32_t size
, uint32_t count
, const uint8_t *buffer
);
252 int (*mmu
)(struct target
*target
, int *enabled
);
254 /* after reset is complete, the target can check if things are properly set up.
256 * This can be used to check if e.g. DCC memory writes have been enabled for
257 * arm7/9 targets, which they really should except in the most contrived
260 int (*check_reset
)(struct target
*target
);
263 #endif /* TARGET_TYPE_H */