src/jtag/startup.tcl

   1 # Defines basic Tcl procs for OpenOCD JTAG module
   2
   3 # Executed during "init". Can be overridden
   4 # by board/target/... scripts
   5 proc jtag_init {} {
   6         if {[catch {jtag arp_init} err]!=0} {
   7                 # try resetting additionally
   8                 init_reset startup
   9         }
  10 }
  11
  12 # This reset logic may be overridden by board/target/... scripts as needed
  13 # to provide a reset that, if possible, is close to a power-up reset.
  14 #
  15 # Exit requirements include:  (a) JTAG must be working, (b) the scan
  16 # chain was validated with "jtag arp_init" (or equivalent), (c) nothing
  17 # stays in reset.  No TAP-specific scans were performed.  It's OK if
  18 # some targets haven't been reset yet; they may need TAP-specific scans.
  19 #
  20 # The "mode" values include:  halt, init, run (from "reset" command);
  21 # startup (at OpenOCD server startup, when JTAG may not yet work); and
  22 # potentially more (for reset types like cold, warm, etc)
  23 proc init_reset { mode } {
  24         if {[using_jtag]} {
  25                 jtag arp_init-reset
  26         }
  27 }
  28
  29 #########
  30
  31 # TODO: power_restore and power_dropout are currently neither
  32 # documented nor supported.
  33
  34 proc power_restore {} {
  35         echo "Sensed power restore, running reset init and halting GDB."
  36         reset init
  37
  38         # Halt GDB so user can deal with a detected power restore.
  39         #
  40         # After GDB is halted, then output is no longer forwarded
  41         # to the GDB console.
  42         set targets [target names]
  43         foreach t $targets {
  44                 # New event script.
  45                 $t invoke-event arp_halt_gdb
  46         }
  47 }
  48
  49 add_help_text power_restore "Overridable procedure run when power restore is detected. Runs 'reset init' by default."
  50
  51 proc power_dropout {} {
  52         echo "Sensed power dropout."
  53 }
  54
  55 #########
  56
  57 # TODO: srst_deasserted and srst_asserted are currently neither
  58 # documented nor supported.
  59
  60 proc srst_deasserted {} {
  61         echo "Sensed nSRST deasserted, running reset init and halting GDB."
  62         reset init
  63
  64         # Halt GDB so user can deal with a detected reset.
  65         #
  66         # After GDB is halted, then output is no longer forwarded
  67         # to the GDB console.
  68         set targets [target names]
  69         foreach t $targets {
  70                 # New event script.
  71                 $t invoke-event arp_halt_gdb
  72         }
  73 }
  74
  75 add_help_text srst_deasserted "Overridable procedure run when srst deassert is detected. Runs 'reset init' by default."
  76
  77 proc srst_asserted {} {
  78         echo "Sensed nSRST asserted."
  79 }
  80
  81 # measure actual JTAG clock
  82 proc measure_clk {} {
  83         set start_time [ms];
  84         set iterations 10000000;
  85         runtest $iterations;
  86         set speed [expr "$iterations.0 / ([ms] - $start_time)"]
  87         echo "Running at more than $speed kHz";
  88 }
  89
  90 add_help_text measure_clk "Runs a test to measure the JTAG clk. Useful with RCLK / RTCK."
  91
  92 proc default_to_jtag { f args } {
  93         set current_transport [transport select]
  94         if {[using_jtag]} {
  95                 eval $f $args
  96         } {
  97                 error "session transport is \"$current_transport\" but your config requires JTAG"
  98         }
  99 }
 100
 101 proc jtag args {
 102         eval default_to_jtag jtag $args
 103 }
 104
 105 proc jtag_rclk args {
 106         eval default_to_jtag jtag_rclk $args
 107 }
 108
 109 proc jtag_ntrst_delay args {
 110         eval default_to_jtag jtag_ntrst_delay $args
 111 }
 112
 113 proc jtag_ntrst_assert_width args {
 114         eval default_to_jtag jtag_ntrst_assert_width $args
 115 }
 116
 117 # BEGIN MIGRATION AIDS ...  these adapter operations originally had
 118 # JTAG-specific names despite the fact that the operations were not
 119 # specific to JTAG, or otherwise had troublesome/misleading names.
 120 #
 121 # FIXME phase these aids out after some releases
 122 #
 123 lappend _telnet_autocomplete_skip jtag_reset
 124 proc jtag_reset args {
 125         echo "DEPRECATED! use 'adapter \[de\]assert' not 'jtag_reset'"
 126         switch $args {
 127                 "0 0"
 128                         {eval adapter deassert trst deassert srst}
 129                 "0 1"
 130                         {eval adapter deassert trst assert srst}
 131                 "1 0"
 132                         {eval adapter assert trst deassert srst}
 133                 "1 1"
 134                         {eval adapter assert trst assert srst}
 135                 default
 136                         {return -code 1 -level 1 "jtag_reset: syntax error"}
 137         }
 138 }
 139
 140 lappend _telnet_autocomplete_skip adapter_khz
 141 proc adapter_khz args {
 142         echo "DEPRECATED! use 'adapter speed' not 'adapter_khz'"
 143         eval adapter speed $args
 144 }
 145
 146 lappend _telnet_autocomplete_skip adapter_name
 147 proc adapter_name args {
 148         echo "DEPRECATED! use 'adapter name' not 'adapter_name'"
 149         eval adapter name $args
 150 }
 151
 152 lappend _telnet_autocomplete_skip adapter_nsrst_delay
 153 proc adapter_nsrst_delay args {
 154         echo "DEPRECATED! use 'adapter srst delay' not 'adapter_nsrst_delay'"
 155         eval adapter srst delay $args
 156 }
 157
 158 lappend _telnet_autocomplete_skip adapter_nsrst_assert_width
 159 proc adapter_nsrst_assert_width args {
 160         echo "DEPRECATED! use 'adapter srst pulse_width' not 'adapter_nsrst_assert_width'"
 161         eval adapter srst pulse_width $args
 162 }
 163
 164 lappend _telnet_autocomplete_skip interface
 165 proc interface args {
 166         echo "DEPRECATED! use 'adapter driver' not 'interface'"
 167         eval adapter driver $args
 168 }
 169
 170 lappend _telnet_autocomplete_skip interface_transports
 171 proc  interface_transports args {
 172         echo "DEPRECATED! use 'adapter transports' not 'interface_transports'"
 173         eval adapter transports $args
 174 }
 175
 176 lappend _telnet_autocomplete_skip interface_list
 177 proc  interface_list args {
 178         echo "DEPRECATED! use 'adapter list' not 'interface_list'"
 179         eval adapter list $args
 180 }
 181
 182 lappend _telnet_autocomplete_skip ftdi_location
 183 proc ftdi_location args {
 184         echo "DEPRECATED! use 'adapter usb location' not 'ftdi_location'"
 185         eval adapter usb location $args
 186 }
 187
 188 lappend _telnet_autocomplete_skip xds110_serial
 189 proc xds110_serial args {
 190         echo "DEPRECATED! use 'xds110 serial' not 'xds110_serial'"
 191         eval xds110 serial $args
 192 }
 193
 194 lappend _telnet_autocomplete_skip xds110_supply_voltage
 195 proc xds110_supply_voltage args {
 196         echo "DEPRECATED! use 'xds110 supply' not 'xds110_supply_voltage'"
 197         eval xds110 supply $args
 198 }
 199
 200 proc hla {cmd args} {
 201         tailcall "hla $cmd" {*}$args
 202 }
 203
 204 lappend _telnet_autocomplete_skip "hla newtap"
 205 proc "hla newtap" {args} {
 206         echo "DEPRECATED! use 'swj_newdap' not 'hla newtap'"
 207         eval swj_newdap $args
 208 }
 209
 210 lappend _telnet_autocomplete_skip ftdi_device_desc
 211 proc ftdi_device_desc args {
 212         echo "DEPRECATED! use 'ftdi device_desc' not 'ftdi_device_desc'"
 213         eval ftdi device_desc $args
 214 }
 215
 216 lappend _telnet_autocomplete_skip ftdi_serial
 217 proc ftdi_serial args {
 218         echo "DEPRECATED! use 'ftdi serial' not 'ftdi_serial'"
 219         eval ftdi serial $args
 220 }
 221
 222 lappend _telnet_autocomplete_skip ftdi_channel
 223 proc ftdi_channel args {
 224         echo "DEPRECATED! use 'ftdi channel' not 'ftdi_channel'"
 225         eval ftdi channel $args
 226 }
 227
 228 lappend _telnet_autocomplete_skip ftdi_layout_init
 229 proc ftdi_layout_init args {
 230         echo "DEPRECATED! use 'ftdi layout_init' not 'ftdi_layout_init'"
 231         eval ftdi layout_init $args
 232 }
 233
 234 lappend _telnet_autocomplete_skip ftdi_layout_signal
 235 proc ftdi_layout_signal args {
 236         echo "DEPRECATED! use 'ftdi layout_signal' not 'ftdi_layout_signal'"
 237         eval ftdi layout_signal $args
 238 }
 239
 240 lappend _telnet_autocomplete_skip ftdi_set_signal
 241 proc ftdi_set_signal args {
 242         echo "DEPRECATED! use 'ftdi set_signal' not 'ftdi_set_signal'"
 243         eval ftdi set_signal $args
 244 }
 245
 246 lappend _telnet_autocomplete_skip ftdi_get_signal
 247 proc ftdi_get_signal args {
 248         echo "DEPRECATED! use 'ftdi get_signal' not 'ftdi_get_signal'"
 249         eval ftdi get_signal $args
 250 }
 251
 252 lappend _telnet_autocomplete_skip ftdi_vid_pid
 253 proc ftdi_vid_pid args {
 254         echo "DEPRECATED! use 'ftdi vid_pid' not 'ftdi_vid_pid'"
 255         eval ftdi vid_pid $args
 256 }
 257
 258 lappend _telnet_autocomplete_skip ftdi_tdo_sample_edge
 259 proc ftdi_tdo_sample_edge args {
 260         echo "DEPRECATED! use 'ftdi tdo_sample_edge' not 'ftdi_tdo_sample_edge'"
 261         eval ftdi tdo_sample_edge $args
 262 }
 263
 264 lappend _telnet_autocomplete_skip remote_bitbang_host
 265 proc remote_bitbang_host args {
 266         echo "DEPRECATED! use 'remote_bitbang host' not 'remote_bitbang_host'"
 267         eval remote_bitbang host $args
 268 }
 269
 270 lappend _telnet_autocomplete_skip remote_bitbang_port
 271 proc remote_bitbang_port args {
 272         echo "DEPRECATED! use 'remote_bitbang port' not 'remote_bitbang_port'"
 273         eval remote_bitbang port $args
 274 }
 275
 276 lappend _telnet_autocomplete_skip openjtag_device_desc
 277 proc openjtag_device_desc args {
 278         echo "DEPRECATED! use 'openjtag device_desc' not 'openjtag_device_desc'"
 279         eval openjtag device_desc $args
 280 }
 281
 282 lappend _telnet_autocomplete_skip openjtag_variant
 283 proc openjtag_variant args {
 284         echo "DEPRECATED! use 'openjtag variant' not 'openjtag_variant'"
 285         eval openjtag variant $args
 286 }
 287
 288 lappend _telnet_autocomplete_skip parport_port
 289 proc parport_port args {
 290         echo "DEPRECATED! use 'parport port' not 'parport_port'"
 291         eval parport port $args
 292 }
 293
 294 lappend _telnet_autocomplete_skip parport_cable
 295 proc parport_cable args {
 296         echo "DEPRECATED! use 'parport cable' not 'parport_cable'"
 297         eval parport cable $args
 298 }
 299
 300 lappend _telnet_autocomplete_skip parport_write_on_exit
 301 proc parport_write_on_exit args {
 302         echo "DEPRECATED! use 'parport write_on_exit' not 'parport_write_on_exit'"
 303         eval parport write_on_exit $args
 304 }
 305
 306 lappend _telnet_autocomplete_skip parport_toggling_time
 307 proc parport_toggling_time args {
 308         echo "DEPRECATED! use 'parport toggling_time' not 'parport_toggling_time'"
 309         eval parport toggling_time $args
 310 }
 311
 312 lappend _telnet_autocomplete_skip jtag_dpi_set_port
 313 proc jtag_dpi_set_port args {
 314         echo "DEPRECATED! use 'jtag_dpi set_port' not 'jtag_dpi_set_port'"
 315         eval jtag_dpi set_port $args
 316 }
 317
 318 lappend _telnet_autocomplete_skip jtag_dpi_set_address
 319 proc jtag_dpi_set_address args {
 320         echo "DEPRECATED! use 'jtag_dpi set_address' not 'jtag_dpi_set_address'"
 321         eval jtag_dpi set_address $args
 322 }
 323
 324 lappend _telnet_autocomplete_skip jtag_vpi_set_port
 325 proc jtag_vpi_set_port args {
 326         echo "DEPRECATED! use 'jtag_vpi set_port' not 'jtag_vpi_set_port'"
 327         eval jtag_vpi set_port $args
 328 }
 329
 330 lappend _telnet_autocomplete_skip jtag_vpi_set_address
 331 proc jtag_vpi_set_address args {
 332         echo "DEPRECATED! use 'jtag_vpi set_address' not 'jtag_vpi_set_address'"
 333         eval jtag_vpi set_address $args
 334 }
 335
 336 lappend _telnet_autocomplete_skip jtag_vpi_stop_sim_on_exit
 337 proc jtag_vpi_stop_sim_on_exit args {
 338         echo "DEPRECATED! use 'jtag_vpi stop_sim_on_exit' not 'jtag_vpi_stop_sim_on_exit'"
 339         eval jtag_vpi stop_sim_on_exit $args
 340 }
 341
 342 lappend _telnet_autocomplete_skip presto_serial
 343 proc presto_serial args {
 344         echo "DEPRECATED! use 'presto serial' not 'presto_serial'"
 345         eval presto serial $args
 346 }
 347
 348 lappend _telnet_autocomplete_skip xlnx_pcie_xvc_config
 349 proc xlnx_pcie_xvc_config args {
 350         echo "DEPRECATED! use 'xlnx_pcie_xvc config' not 'xlnx_pcie_xvc_config'"
 351         eval xlnx_pcie_xvc config $args
 352 }
 353
 354 lappend _telnet_autocomplete_skip ulink_download_firmware
 355 proc ulink_download_firmware args {
 356         echo "DEPRECATED! use 'ulink download_firmware' not 'ulink_download_firmware'"
 357         eval ulink download_firmware $args
 358 }
 359
 360 lappend _telnet_autocomplete_skip vsllink_usb_vid
 361 proc vsllink_usb_vid args {
 362         echo "DEPRECATED! use 'vsllink usb_vid' not 'vsllink_usb_vid'"
 363         eval vsllink usb_vid $args
 364 }
 365
 366 lappend _telnet_autocomplete_skip vsllink_usb_pid
 367 proc vsllink_usb_pid args {
 368         echo "DEPRECATED! use 'vsllink usb_pid' not 'vsllink_usb_pid'"
 369         eval vsllink usb_pid $args
 370 }
 371
 372 lappend _telnet_autocomplete_skip vsllink_usb_serial
 373 proc vsllink_usb_serial args {
 374         echo "DEPRECATED! use 'vsllink usb_serial' not 'vsllink_usb_serial'"
 375         eval vsllink usb_serial $args
 376 }
 377
 378 lappend _telnet_autocomplete_skip vsllink_usb_bulkin
 379 proc vsllink_usb_bulkin args {
 380         echo "DEPRECATED! use 'vsllink usb_bulkin' not 'vsllink_usb_bulkin'"
 381         eval vsllink usb_bulkin $args
 382 }
 383
 384 lappend _telnet_autocomplete_skip vsllink_usb_bulkout
 385 proc vsllink_usb_bulkout args {
 386         echo "DEPRECATED! use 'vsllink usb_bulkout' not 'vsllink_usb_bulkout'"
 387         eval vsllink usb_bulkout $args
 388 }
 389
 390 lappend _telnet_autocomplete_skip vsllink_usb_interface
 391 proc vsllink_usb_interface args {
 392         echo "DEPRECATED! use 'vsllink usb_interface' not 'vsllink_usb_interface'"
 393         eval vsllink usb_interface $args
 394 }
 395
 396 lappend _telnet_autocomplete_skip bcm2835gpio_jtag_nums
 397 proc bcm2835gpio_jtag_nums args {
 398         echo "DEPRECATED! use 'bcm2835gpio jtag_nums' not 'bcm2835gpio_jtag_nums'"
 399         eval bcm2835gpio jtag_nums $args
 400 }
 401
 402 lappend _telnet_autocomplete_skip bcm2835gpio_tck_num
 403 proc bcm2835gpio_tck_num args {
 404         echo "DEPRECATED! use 'bcm2835gpio tck_num' not 'bcm2835gpio_tck_num'"
 405         eval bcm2835gpio tck_num $args
 406 }
 407
 408 lappend _telnet_autocomplete_skip bcm2835gpio_tms_num
 409 proc bcm2835gpio_tms_num args {
 410         echo "DEPRECATED! use 'bcm2835gpio tms_num' not 'bcm2835gpio_tms_num'"
 411         eval bcm2835gpio tms_num $args
 412 }
 413
 414 lappend _telnet_autocomplete_skip bcm2835gpio_tdo_num
 415 proc bcm2835gpio_tdo_num args {
 416         echo "DEPRECATED! use 'bcm2835gpio tdo_num' not 'bcm2835gpio_tdo_num'"
 417         eval bcm2835gpio tdo_num $args
 418 }
 419
 420 lappend _telnet_autocomplete_skip bcm2835gpio_tdi_num
 421 proc bcm2835gpio_tdi_num args {
 422         echo "DEPRECATED! use 'bcm2835gpio tdi_num' not 'bcm2835gpio_tdi_num'"
 423         eval bcm2835gpio tdi_num $args
 424 }
 425
 426 lappend _telnet_autocomplete_skip bcm2835gpio_swd_nums
 427 proc bcm2835gpio_swd_nums args {
 428         echo "DEPRECATED! use 'bcm2835gpio swd_nums' not 'bcm2835gpio_swd_nums'"
 429         eval bcm2835gpio swd_nums $args
 430 }
 431
 432 lappend _telnet_autocomplete_skip bcm2835gpio_swclk_num
 433 proc bcm2835gpio_swclk_num args {
 434         echo "DEPRECATED! use 'bcm2835gpio swclk_num' not 'bcm2835gpio_swclk_num'"
 435         eval bcm2835gpio swclk_num $args
 436 }
 437
 438 lappend _telnet_autocomplete_skip bcm2835gpio_swdio_num
 439 proc bcm2835gpio_swdio_num args {
 440         echo "DEPRECATED! use 'bcm2835gpio swdio_num' not 'bcm2835gpio_swdio_num'"
 441         eval bcm2835gpio swdio_num $args
 442 }
 443
 444 lappend _telnet_autocomplete_skip bcm2835gpio_swdio_dir_num
 445 proc bcm2835gpio_swdio_dir_num args {
 446         echo "DEPRECATED! use 'bcm2835gpio swdio_dir_num' not 'bcm2835gpio_swdio_dir_num'"
 447         eval bcm2835gpio swdio_dir_num $args
 448 }
 449
 450 lappend _telnet_autocomplete_skip bcm2835gpio_srst_num
 451 proc bcm2835gpio_srst_num args {
 452         echo "DEPRECATED! use 'bcm2835gpio srst_num' not 'bcm2835gpio_srst_num'"
 453         eval bcm2835gpio srst_num $args
 454 }
 455
 456 lappend _telnet_autocomplete_skip bcm2835gpio_trst_num
 457 proc bcm2835gpio_trst_num args {
 458         echo "DEPRECATED! use 'bcm2835gpio trst_num' not 'bcm2835gpio_trst_num'"
 459         eval bcm2835gpio trst_num $args
 460 }
 461
 462 lappend _telnet_autocomplete_skip bcm2835gpio_speed_coeffs
 463 proc bcm2835gpio_speed_coeffs args {
 464         echo "DEPRECATED! use 'bcm2835gpio speed_coeffs' not 'bcm2835gpio_speed_coeffs'"
 465         eval bcm2835gpio speed_coeffs $args
 466 }
 467
 468 lappend _telnet_autocomplete_skip bcm2835gpio_peripheral_base
 469 proc bcm2835gpio_peripheral_base args {
 470         echo "DEPRECATED! use 'bcm2835gpio peripheral_base' not 'bcm2835gpio_peripheral_base'"
 471         eval bcm2835gpio peripheral_base $args
 472 }
 473
 474 lappend _telnet_autocomplete_skip linuxgpiod_jtag_nums
 475 proc linuxgpiod_jtag_nums args {
 476         echo "DEPRECATED! use 'linuxgpiod jtag_nums' not 'linuxgpiod_jtag_nums'"
 477         eval linuxgpiod jtag_nums $args
 478 }
 479
 480 lappend _telnet_autocomplete_skip linuxgpiod_tck_num
 481 proc linuxgpiod_tck_num args {
 482         echo "DEPRECATED! use 'linuxgpiod tck_num' not 'linuxgpiod_tck_num'"
 483         eval linuxgpiod tck_num $args
 484 }
 485
 486 lappend _telnet_autocomplete_skip linuxgpiod_tms_num
 487 proc linuxgpiod_tms_num args {
 488         echo "DEPRECATED! use 'linuxgpiod tms_num' not 'linuxgpiod_tms_num'"
 489         eval linuxgpiod tms_num $args
 490 }
 491
 492 lappend _telnet_autocomplete_skip linuxgpiod_tdo_num
 493 proc linuxgpiod_tdo_num args {
 494         echo "DEPRECATED! use 'linuxgpiod tdo_num' not 'linuxgpiod_tdo_num'"
 495         eval linuxgpiod tdo_num $args
 496 }
 497
 498 lappend _telnet_autocomplete_skip linuxgpiod_tdi_num
 499 proc linuxgpiod_tdi_num args {
 500         echo "DEPRECATED! use 'linuxgpiod tdi_num' not 'linuxgpiod_tdi_num'"
 501         eval linuxgpiod tdi_num $args
 502 }
 503
 504 lappend _telnet_autocomplete_skip linuxgpiod_srst_num
 505 proc linuxgpiod_srst_num args {
 506         echo "DEPRECATED! use 'linuxgpiod srst_num' not 'linuxgpiod_srst_num'"
 507         eval linuxgpiod srst_num $args
 508 }
 509
 510 lappend _telnet_autocomplete_skip linuxgpiod_trst_num
 511 proc linuxgpiod_trst_num args {
 512         echo "DEPRECATED! use 'linuxgpiod trst_num' not 'linuxgpiod_trst_num'"
 513         eval linuxgpiod trst_num $args
 514 }
 515
 516 lappend _telnet_autocomplete_skip linuxgpiod_swd_nums
 517 proc linuxgpiod_swd_nums args {
 518         echo "DEPRECATED! use 'linuxgpiod swd_nums' not 'linuxgpiod_swd_nums'"
 519         eval linuxgpiod swd_nums $args
 520 }
 521
 522 lappend _telnet_autocomplete_skip linuxgpiod_swclk_num
 523 proc linuxgpiod_swclk_num args {
 524         echo "DEPRECATED! use 'linuxgpiod swclk_num' not 'linuxgpiod_swclk_num'"
 525         eval linuxgpiod swclk_num $args
 526 }
 527
 528 lappend _telnet_autocomplete_skip linuxgpiod_swdio_num
 529 proc linuxgpiod_swdio_num args {
 530         echo "DEPRECATED! use 'linuxgpiod swdio_num' not 'linuxgpiod_swdio_num'"
 531         eval linuxgpiod swdio_num $args
 532 }
 533
 534 lappend _telnet_autocomplete_skip linuxgpiod_led_num
 535 proc linuxgpiod_led_num args {
 536         echo "DEPRECATED! use 'linuxgpiod led_num' not 'linuxgpiod_led_num'"
 537         eval linuxgpiod led_num $args
 538 }
 539
 540 lappend _telnet_autocomplete_skip linuxgpiod_gpiochip
 541 proc linuxgpiod_gpiochip args {
 542         echo "DEPRECATED! use 'linuxgpiod gpiochip' not 'linuxgpiod_gpiochip'"
 543         eval linuxgpiod gpiochip $args
 544 }
 545
 546 lappend _telnet_autocomplete_skip sysfsgpio_jtag_nums
 547 proc sysfsgpio_jtag_nums args {
 548         echo "DEPRECATED! use 'sysfsgpio jtag_nums' not 'sysfsgpio_jtag_nums'"
 549         eval sysfsgpio jtag_nums $args
 550 }
 551
 552 lappend _telnet_autocomplete_skip sysfsgpio_tck_num
 553 proc sysfsgpio_tck_num args {
 554         echo "DEPRECATED! use 'sysfsgpio tck_num' not 'sysfsgpio_tck_num'"
 555         eval sysfsgpio tck_num $args
 556 }
 557
 558 lappend _telnet_autocomplete_skip sysfsgpio_tms_num
 559 proc sysfsgpio_tms_num args {
 560         echo "DEPRECATED! use 'sysfsgpio tms_num' not 'sysfsgpio_tms_num'"
 561         eval sysfsgpio tms_num $args
 562 }
 563
 564 lappend _telnet_autocomplete_skip sysfsgpio_tdo_num
 565 proc sysfsgpio_tdo_num args {
 566         echo "DEPRECATED! use 'sysfsgpio tdo_num' not 'sysfsgpio_tdo_num'"
 567         eval sysfsgpio tdo_num $args
 568 }
 569
 570 lappend _telnet_autocomplete_skip sysfsgpio_tdi_num
 571 proc sysfsgpio_tdi_num args {
 572         echo "DEPRECATED! use 'sysfsgpio tdi_num' not 'sysfsgpio_tdi_num'"
 573         eval sysfsgpio tdi_num $args
 574 }
 575
 576 lappend _telnet_autocomplete_skip sysfsgpio_srst_num
 577 proc sysfsgpio_srst_num args {
 578         echo "DEPRECATED! use 'sysfsgpio srst_num' not 'sysfsgpio_srst_num'"
 579         eval sysfsgpio srst_num $args
 580 }
 581
 582 lappend _telnet_autocomplete_skip sysfsgpio_trst_num
 583 proc sysfsgpio_trst_num args {
 584         echo "DEPRECATED! use 'sysfsgpio trst_num' not 'sysfsgpio_trst_num'"
 585         eval sysfsgpio trst_num $args
 586 }
 587
 588 lappend _telnet_autocomplete_skip sysfsgpio_swd_nums
 589 proc sysfsgpio_swd_nums args {
 590         echo "DEPRECATED! use 'sysfsgpio swd_nums' not 'sysfsgpio_swd_nums'"
 591         eval sysfsgpio swd_nums $args
 592 }
 593
 594 lappend _telnet_autocomplete_skip sysfsgpio_swclk_num
 595 proc sysfsgpio_swclk_num args {
 596         echo "DEPRECATED! use 'sysfsgpio swclk_num' not 'sysfsgpio_swclk_num'"
 597         eval sysfsgpio swclk_num $args
 598 }
 599
 600 lappend _telnet_autocomplete_skip sysfsgpio_swdio_num
 601 proc sysfsgpio_swdio_num args {
 602         echo "DEPRECATED! use 'sysfsgpio swdio_num' not 'sysfsgpio_swdio_num'"
 603         eval sysfsgpio swdio_num $args
 604 }
 605
 606 lappend _telnet_autocomplete_skip buspirate_adc
 607 proc buspirate_adc args {
 608         echo "DEPRECATED! use 'buspirate adc' not 'buspirate_adc'"
 609         eval buspirate adc $args
 610 }
 611
 612 lappend _telnet_autocomplete_skip buspirate_vreg
 613 proc buspirate_vreg args {
 614         echo "DEPRECATED! use 'buspirate vreg' not 'buspirate_vreg'"
 615         eval buspirate vreg $args
 616 }
 617
 618 lappend _telnet_autocomplete_skip buspirate_pullup
 619 proc buspirate_pullup args {
 620         echo "DEPRECATED! use 'buspirate pullup' not 'buspirate_pullup'"
 621         eval buspirate pullup $args
 622 }
 623
 624 lappend _telnet_autocomplete_skip buspirate_led
 625 proc buspirate_led args {
 626         echo "DEPRECATED! use 'buspirate led' not 'buspirate_led'"
 627         eval buspirate led $args
 628 }
 629
 630 lappend _telnet_autocomplete_skip buspirate_speed
 631 proc buspirate_speed args {
 632         echo "DEPRECATED! use 'buspirate speed' not 'buspirate_speed'"
 633         eval buspirate speed $args
 634 }
 635
 636 lappend _telnet_autocomplete_skip buspirate_mode
 637 proc buspirate_mode args {
 638         echo "DEPRECATED! use 'buspirate mode' not 'buspirate_mode'"
 639         eval buspirate mode $args
 640 }
 641
 642 lappend _telnet_autocomplete_skip buspirate_port
 643 proc buspirate_port args {
 644         echo "DEPRECATED! use 'buspirate port' not 'buspirate_port'"
 645         eval buspirate port $args
 646 }
 647
 648 lappend _telnet_autocomplete_skip usb_blaster_device_desc
 649 proc usb_blaster_device_desc args {
 650         echo "DEPRECATED! use 'usb_blaster device_desc' not 'usb_blaster_device_desc'"
 651         eval usb_blaster device_desc $args
 652 }
 653
 654 lappend _telnet_autocomplete_skip usb_blaster_vid_pid
 655 proc usb_blaster_vid_pid args {
 656         echo "DEPRECATED! use 'usb_blaster vid_pid' not 'usb_blaster_vid_pid'"
 657         eval usb_blaster vid_pid $args
 658 }
 659
 660 lappend _telnet_autocomplete_skip usb_blaster_lowlevel_driver
 661 proc usb_blaster_lowlevel_driver args {
 662         echo "DEPRECATED! use 'usb_blaster lowlevel_driver' not 'usb_blaster_lowlevel_driver'"
 663         eval usb_blaster lowlevel_driver $args
 664 }
 665
 666 lappend _telnet_autocomplete_skip usb_blaster_pin
 667 proc usb_blaster_pin args {
 668         echo "DEPRECATED! use 'usb_blaster pin' not 'usb_blaster_pin'"
 669         eval usb_blaster pin $args
 670 }
 671
 672 lappend _telnet_autocomplete_skip usb_blaster_firmware
 673 proc usb_blaster_firmware args {
 674         echo "DEPRECATED! use 'usb_blaster firmware' not 'usb_blaster_firmware'"
 675         eval usb_blaster firmware $args
 676 }
 677
 678 lappend _telnet_autocomplete_skip ft232r_serial_desc
 679 proc ft232r_serial_desc args {
 680         echo "DEPRECATED! use 'ft232r serial_desc' not 'ft232r_serial_desc'"
 681         eval ft232r serial_desc $args
 682 }
 683
 684 lappend _telnet_autocomplete_skip ft232r_vid_pid
 685 proc ft232r_vid_pid args {
 686         echo "DEPRECATED! use 'ft232r vid_pid' not 'ft232r_vid_pid'"
 687         eval ft232r vid_pid $args
 688 }
 689
 690 lappend _telnet_autocomplete_skip ft232r_jtag_nums
 691 proc ft232r_jtag_nums args {
 692         echo "DEPRECATED! use 'ft232r jtag_nums' not 'ft232r_jtag_nums'"
 693         eval ft232r jtag_nums $args
 694 }
 695
 696 lappend _telnet_autocomplete_skip ft232r_tck_num
 697 proc ft232r_tck_num args {
 698         echo "DEPRECATED! use 'ft232r tck_num' not 'ft232r_tck_num'"
 699         eval ft232r tck_num $args
 700 }
 701
 702 lappend _telnet_autocomplete_skip ft232r_tms_num
 703 proc ft232r_tms_num args {
 704         echo "DEPRECATED! use 'ft232r tms_num' not 'ft232r_tms_num'"
 705         eval ft232r tms_num $args
 706 }
 707
 708 lappend _telnet_autocomplete_skip ft232r_tdo_num
 709 proc ft232r_tdo_num args {
 710         echo "DEPRECATED! use 'ft232r tdo_num' not 'ft232r_tdo_num'"
 711         eval ft232r tdo_num $args
 712 }
 713
 714 lappend _telnet_autocomplete_skip ft232r_tdi_num
 715 proc ft232r_tdi_num args {
 716         echo "DEPRECATED! use 'ft232r tdi_num' not 'ft232r_tdi_num'"
 717         eval ft232r tdi_num $args
 718 }
 719
 720 lappend _telnet_autocomplete_skip ft232r_srst_num
 721 proc ft232r_srst_num args {
 722         echo "DEPRECATED! use 'ft232r srst_num' not 'ft232r_srst_num'"
 723         eval ft232r srst_num $args
 724 }
 725
 726 lappend _telnet_autocomplete_skip ft232r_trst_num
 727 proc ft232r_trst_num args {
 728         echo "DEPRECATED! use 'ft232r trst_num' not 'ft232r_trst_num'"
 729         eval ft232r trst_num $args
 730 }
 731
 732 lappend _telnet_autocomplete_skip ft232r_restore_serial
 733 proc ft232r_restore_serial args {
 734         echo "DEPRECATED! use 'ft232r restore_serial' not 'ft232r_restore_serial'"
 735         eval ft232r restore_serial $args
 736 }
 737
 738 # END MIGRATION AIDS