jtag/drivers/jlink: Use correct command errors
[openocd.git] / tcl / board / ti_am62a7evm.cfg
blobe40790950bb5ba2db9e43860d9fc742b9709a226
1 # SPDX-License-Identifier: GPL-2.0-or-later
2 # Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/
4 # Texas Instruments am62a7 EVM/SK
5 # Link: https://www.ti.com/tool/SK-AM62A-LP
8 # AM62a7 EVM/SK has an xds110 onboard.
9 source [find interface/xds110.cfg]
11 transport select jtag
13 # default JTAG configuration has only SRST and no TRST
14 reset_config srst_only srst_push_pull
16 # delay after SRST goes inactive
17 adapter srst delay 20
19 if { ![info exists SOC] } {
20         set SOC am62a7
23 source [find target/ti_k3.cfg]
25 adapter speed 2500