tcl/board/linksys-wag200g.cfg

   1 # SPDX-License-Identifier: GPL-2.0-or-later
   2
   3 #
   4 # Linksys WAG200G Router
   5 #
   6 # The stock firmware Flash layout is organized as follow:
   7 #
   8 #   Start       End         Device
   9 #   0x90000000  0x90020000  /dev/mtdblock/2
  10 #   0x90020000  0x900d0000  /dev/mtdblock/1
  11 #   0x900d0000  0x903a0000  /dev/mtdblock/0
  12 #   0x903a0000  0x903e0000  /dev/mtdblock/5
  13 #   0x903e0000  0x903f0000  /dev/mtdblock/3
  14 #   0x903f0000  0x90400000  /dev/mtdblock/4
  15
  16 set partition_list {
  17     adam2       { "Adam2 bootloader"            0x90000000 0x00020000 }
  18     kernel      { "Kernel"                      0x90020000 0x000b0000 }
  19     rootfs      { "Root FS"                     0x900d0000 0x002d0000 }
  20     lang        { "Minix language part"         0x903a0000 0x00040000 }
  21     config      { "Firmware config"             0x903e0000 0x00010000 }
  22     adam2env    { "Adam2 environment"           0x903f0000 0x00010000 }
  23 }
  24
  25 source [find target/ti-ar7.cfg]
  26
  27 # External 4MB MXIC 29LV320MBTC Flash (Manufacturer/Device: 0x00c2 0x227e)
  28 set _FLASHNAME $_CHIPNAME.flash
  29 flash bank $_FLASHNAME cfi 0x90000000 0x00400000 2 2 $_TARGETNAME