1 /***************************************************************************
2 * Copyright (C) 2009 by Øyvind Harboe *
3 * Øyvind Harboe <oyvind.harboe@zylin.com> *
5 * Copyright (C) 2009 by SoftPLC Corporation. http://softplc.com *
6 * Dick Hollenbeck <dick@softplc.com> *
8 * Copyright (C) 2004, 2006 by Dominic Rath *
9 * Dominic.Rath@gmx.de *
11 * Copyright (C) 2008 by Spencer Oliver *
12 * spen@spen-soft.co.uk *
14 * This program is free software; you can redistribute it and/or modify *
15 * it under the terms of the GNU General Public License as published by *
16 * the Free Software Foundation; either version 2 of the License, or *
17 * (at your option) any later version. *
19 * This program is distributed in the hope that it will be useful, *
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
22 * GNU General Public License for more details. *
24 * You should have received a copy of the GNU General Public License *
25 * along with this program; if not, write to the *
26 * Free Software Foundation, Inc., *
27 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
28 ***************************************************************************/
32 * JTAG adapters based on the FT2232 full and high speed USB parts are
33 * popular low cost JTAG debug solutions. Many FT2232 based JTAG adapters
34 * are discrete, but development boards may integrate them as alternatives
35 * to more capable (and expensive) third party JTAG pods.
37 * JTAG uses only one of the two communications channels ("MPSSE engines")
38 * on these devices. Adapters based on FT4232 parts have four ports/channels
39 * (A/B/C/D), instead of just two (A/B).
41 * Especially on development boards integrating one of these chips (as
42 * opposed to discrete pods/dongles), the additional channels can be used
43 * for a variety of purposes, but OpenOCD only uses one channel at a time.
45 * - As a USB-to-serial adapter for the target's console UART ...
46 * which may be able to support ROM boot loaders that load initial
47 * firmware images to flash (or SRAM).
49 * - On systems which support ARM's SWD in addition to JTAG, or instead
50 * of it, that second port can be used for reading SWV/SWO trace data.
52 * - Additional JTAG links, e.g. to a CPLD or * FPGA.
54 * FT2232 based JTAG adapters are "dumb" not "smart", because most JTAG
55 * request/response interactions involve round trips over the USB link.
56 * A "smart" JTAG adapter has intelligence close to the scan chain, so it
57 * can for example poll quickly for a status change (usually taking on the
58 * order of microseconds not milliseconds) before beginning a queued
59 * transaction which require the previous one to have completed.
61 * There are dozens of adapters of this type, differing in details which
62 * this driver needs to understand. Those "layout" details are required
63 * as part of FT2232 driver configuration.
65 * This code uses information contained in the MPSSE specification which was
67 * http://www.ftdichip.com/Documents/AppNotes/AN2232C-01_MPSSE_Cmnd.pdf
68 * Hereafter this is called the "MPSSE Spec".
70 * The datasheet for the ftdichip.com's FT2232D part is here:
71 * http://www.ftdichip.com/Documents/DataSheets/DS_FT2232D.pdf
73 * Also note the issue with code 0x4b (clock data to TMS) noted in
74 * http://developer.intra2net.com/mailarchive/html/libftdi/2009/msg00292.html
75 * which can affect longer JTAG state paths.
82 /* project specific includes */
83 #include <jtag/interface.h>
84 #include <transport/transport.h>
85 #include <helper/time_support.h>
93 #if (BUILD_FT2232_FTD2XX == 1 && BUILD_FT2232_LIBFTDI == 1)
94 #error "BUILD_FT2232_FTD2XX && BUILD_FT2232_LIBFTDI are mutually exclusive"
95 #elif (BUILD_FT2232_FTD2XX != 1 && BUILD_FT2232_LIBFTDI != 1)
96 #error "BUILD_FT2232_FTD2XX || BUILD_FT2232_LIBFTDI must be chosen"
99 /* FT2232 access library includes */
100 #if BUILD_FT2232_FTD2XX == 1
102 #include "ftd2xx_common.h"
104 enum ftdi_interface
{
112 #elif BUILD_FT2232_LIBFTDI == 1
116 /* max TCK for the high speed devices 30000 kHz */
117 #define FTDI_x232H_MAX_TCK 30000
118 /* max TCK for the full speed devices 6000 kHz */
119 #define FTDI_2232C_MAX_TCK 6000
120 /* this speed value tells that RTCK is requested */
121 #define RTCK_SPEED -1
124 * On my Athlon XP 1900+ EHCI host with FT2232H JTAG dongle I get read timeout
125 * errors with a retry count of 100. Increasing it solves the problem for me.
128 * FIXME There's likely an issue with the usb_read_timeout from libftdi.
129 * Fix that (libusb? kernel? libftdi? here?) and restore the retry count
132 #define LIBFTDI_READ_RETRY_COUNT 2000
134 #ifndef BUILD_FT2232_HIGHSPEED
135 #if BUILD_FT2232_FTD2XX == 1
136 enum { FT_DEVICE_2232H
= 6, FT_DEVICE_4232H
, FT_DEVICE_232H
};
137 #elif BUILD_FT2232_LIBFTDI == 1
138 enum ftdi_chip_type
{ TYPE_2232H
= 4, TYPE_4232H
= 5, TYPE_232H
= 6 };
143 * Send out \a num_cycles on the TCK line while the TAP(s) are in a
144 * stable state. Calling code must ensure that current state is stable,
145 * that verification is not done in here.
147 * @param num_cycles The number of clocks cycles to send.
148 * @param cmd The command to send.
150 * @returns ERROR_OK on success, or ERROR_JTAG_QUEUE_FAILED on failure.
152 static int ft2232_stableclocks(int num_cycles
, struct jtag_command
*cmd
);
154 static char *ft2232_device_desc_A
;
155 static char *ft2232_device_desc
;
156 static char *ft2232_serial
;
157 static uint8_t ft2232_latency
= 2;
158 static unsigned ft2232_max_tck
= FTDI_2232C_MAX_TCK
;
159 static int ft2232_channel
= INTERFACE_ANY
;
161 #define MAX_USB_IDS 8
162 /* vid = pid = 0 marks the end of the list */
163 static uint16_t ft2232_vid
[MAX_USB_IDS
+ 1] = { 0x0403, 0 };
164 static uint16_t ft2232_pid
[MAX_USB_IDS
+ 1] = { 0x6010, 0 };
166 struct ft2232_layout
{
169 void (*reset
)(int trst
, int srst
);
174 /* init procedures for supported layouts */
175 static int usbjtag_init(void);
176 static int jtagkey_init(void);
177 static int lm3s811_jtag_init(void);
178 static int icdi_jtag_init(void);
179 static int olimex_jtag_init(void);
180 static int flyswatter1_init(void);
181 static int flyswatter2_init(void);
182 static int minimodule_init(void);
183 static int turtle_init(void);
184 static int comstick_init(void);
185 static int stm32stick_init(void);
186 static int axm0432_jtag_init(void);
187 static int sheevaplug_init(void);
188 static int icebear_jtag_init(void);
189 static int cortino_jtag_init(void);
190 static int signalyzer_init(void);
191 static int signalyzer_h_init(void);
192 static int ktlink_init(void);
193 static int redbee_init(void);
194 static int lisa_l_init(void);
195 static int flossjtag_init(void);
196 static int xds100v2_init(void);
197 static int digilent_hs1_init(void);
199 /* reset procedures for supported layouts */
200 static void ftx23_reset(int trst
, int srst
);
201 static void jtagkey_reset(int trst
, int srst
);
202 static void olimex_jtag_reset(int trst
, int srst
);
203 static void flyswatter1_reset(int trst
, int srst
);
204 static void flyswatter2_reset(int trst
, int srst
);
205 static void minimodule_reset(int trst
, int srst
);
206 static void turtle_reset(int trst
, int srst
);
207 static void comstick_reset(int trst
, int srst
);
208 static void stm32stick_reset(int trst
, int srst
);
209 static void axm0432_jtag_reset(int trst
, int srst
);
210 static void sheevaplug_reset(int trst
, int srst
);
211 static void icebear_jtag_reset(int trst
, int srst
);
212 static void signalyzer_h_reset(int trst
, int srst
);
213 static void ktlink_reset(int trst
, int srst
);
214 static void redbee_reset(int trst
, int srst
);
215 static void xds100v2_reset(int trst
, int srst
);
216 static void digilent_hs1_reset(int trst
, int srst
);
218 /* blink procedures for layouts that support a blinking led */
219 static void olimex_jtag_blink(void);
220 static void flyswatter1_jtag_blink(void);
221 static void flyswatter2_jtag_blink(void);
222 static void turtle_jtag_blink(void);
223 static void signalyzer_h_blink(void);
224 static void ktlink_blink(void);
225 static void lisa_l_blink(void);
226 static void flossjtag_blink(void);
228 /* common transport support options */
230 /* static const char *jtag_and_swd[] = { "jtag", "swd", NULL }; */
232 static const struct ft2232_layout ft2232_layouts
[] = {
234 .init
= usbjtag_init
,
235 .reset
= ftx23_reset
,
238 .init
= jtagkey_init
,
239 .reset
= jtagkey_reset
,
241 { .name
= "jtagkey_prototype_v1",
242 .init
= jtagkey_init
,
243 .reset
= jtagkey_reset
,
245 { .name
= "oocdlink",
246 .init
= jtagkey_init
,
247 .reset
= jtagkey_reset
,
249 { .name
= "signalyzer",
250 .init
= signalyzer_init
,
251 .reset
= ftx23_reset
,
253 { .name
= "evb_lm3s811",
254 .init
= lm3s811_jtag_init
,
255 .reset
= ftx23_reset
,
257 { .name
= "luminary_icdi",
258 .init
= icdi_jtag_init
,
259 .reset
= ftx23_reset
,
261 { .name
= "olimex-jtag",
262 .init
= olimex_jtag_init
,
263 .reset
= olimex_jtag_reset
,
264 .blink
= olimex_jtag_blink
266 { .name
= "flyswatter",
267 .init
= flyswatter1_init
,
268 .reset
= flyswatter1_reset
,
269 .blink
= flyswatter1_jtag_blink
271 { .name
= "flyswatter2",
272 .init
= flyswatter2_init
,
273 .reset
= flyswatter2_reset
,
274 .blink
= flyswatter2_jtag_blink
276 { .name
= "minimodule",
277 .init
= minimodule_init
,
278 .reset
= minimodule_reset
,
280 { .name
= "turtelizer2",
282 .reset
= turtle_reset
,
283 .blink
= turtle_jtag_blink
285 { .name
= "comstick",
286 .init
= comstick_init
,
287 .reset
= comstick_reset
,
289 { .name
= "stm32stick",
290 .init
= stm32stick_init
,
291 .reset
= stm32stick_reset
,
293 { .name
= "axm0432_jtag",
294 .init
= axm0432_jtag_init
,
295 .reset
= axm0432_jtag_reset
,
297 { .name
= "sheevaplug",
298 .init
= sheevaplug_init
,
299 .reset
= sheevaplug_reset
,
302 .init
= icebear_jtag_init
,
303 .reset
= icebear_jtag_reset
,
306 .init
= cortino_jtag_init
,
307 .reset
= comstick_reset
,
309 { .name
= "signalyzer-h",
310 .init
= signalyzer_h_init
,
311 .reset
= signalyzer_h_reset
,
312 .blink
= signalyzer_h_blink
316 .reset
= ktlink_reset
,
317 .blink
= ktlink_blink
319 { .name
= "redbee-econotag",
321 .reset
= redbee_reset
,
323 { .name
= "redbee-usb",
325 .reset
= redbee_reset
,
326 .channel
= INTERFACE_B
,
330 .reset
= ftx23_reset
,
331 .blink
= lisa_l_blink
,
332 .channel
= INTERFACE_B
,
334 { .name
= "flossjtag",
335 .init
= flossjtag_init
,
336 .reset
= ftx23_reset
,
337 .blink
= flossjtag_blink
,
339 { .name
= "xds100v2",
340 .init
= xds100v2_init
,
341 .reset
= xds100v2_reset
,
343 { .name
= "digilent-hs1",
344 .init
= digilent_hs1_init
,
345 .reset
= digilent_hs1_reset
,
346 .channel
= INTERFACE_A
,
348 { .name
= NULL
, /* END OF TABLE */ },
351 /* bitmask used to drive nTRST; usually a GPIOLx signal */
352 static uint8_t nTRST
;
353 static uint8_t nTRSTnOE
;
354 /* bitmask used to drive nSRST; usually a GPIOLx signal */
355 static uint8_t nSRST
;
356 static uint8_t nSRSTnOE
;
358 /** the layout being used with this debug session */
359 static const struct ft2232_layout
*layout
;
361 /** default bitmask values driven on DBUS: TCK/TDI/TDO/TMS and GPIOL(0..4) */
362 static uint8_t low_output
;
364 /* note that direction bit == 1 means that signal is an output */
366 /** default direction bitmask for DBUS: TCK/TDI/TDO/TMS and GPIOL(0..4) */
367 static uint8_t low_direction
;
368 /** default value bitmask for CBUS GPIOH(0..4) */
369 static uint8_t high_output
;
370 /** default direction bitmask for CBUS GPIOH(0..4) */
371 static uint8_t high_direction
;
373 #if BUILD_FT2232_FTD2XX == 1
374 static FT_HANDLE ftdih
;
375 static FT_DEVICE ftdi_device
;
376 #elif BUILD_FT2232_LIBFTDI == 1
377 static struct ftdi_context ftdic
;
378 static enum ftdi_chip_type ftdi_device
;
381 static struct jtag_command
*first_unsent
; /* next command that has to be sent */
382 static int require_send
;
384 /* http://urjtag.wiki.sourceforge.net/Cable + FT2232 says:
386 "There is a significant difference between libftdi and libftd2xx. The latter
387 one allows to schedule up to 64*64 bytes of result data while libftdi fails
388 with more than 4*64. As a consequence, the FT2232 driver is forced to
389 perform around 16x more USB transactions for long command streams with TDO
390 capture when running with libftdi."
393 #define FT2232_BUFFER_SIZE 131072
394 a comment would have been nice.
397 #if BUILD_FT2232_FTD2XX == 1
398 #define FT2232_BUFFER_READ_QUEUE_SIZE (64*64)
400 #define FT2232_BUFFER_READ_QUEUE_SIZE (64*4)
403 #define FT2232_BUFFER_SIZE 131072
405 static uint8_t *ft2232_buffer
;
406 static int ft2232_buffer_size
;
407 static int ft2232_read_pointer
;
408 static int ft2232_expect_read
;
411 * Function buffer_write
412 * writes a byte into the byte buffer, "ft2232_buffer", which must be sent later.
413 * @param val is the byte to send.
415 static inline void buffer_write(uint8_t val
)
417 assert(ft2232_buffer
);
418 assert((unsigned) ft2232_buffer_size
< (unsigned) FT2232_BUFFER_SIZE
);
419 ft2232_buffer
[ft2232_buffer_size
++] = val
;
423 * Function buffer_read
424 * returns a byte from the byte buffer.
426 static inline uint8_t buffer_read(void)
428 assert(ft2232_buffer
);
429 assert(ft2232_read_pointer
< ft2232_buffer_size
);
430 return ft2232_buffer
[ft2232_read_pointer
++];
434 * Clocks out \a bit_count bits on the TMS line, starting with the least
435 * significant bit of tms_bits and progressing to more significant bits.
436 * Rigorous state transition logging is done here via tap_set_state().
438 * @param mpsse_cmd One of the MPSSE TMS oriented commands such as
439 * 0x4b or 0x6b. See the MPSSE spec referenced above for their
440 * functionality. The MPSSE command "Clock Data to TMS/CS Pin (no Read)"
441 * is often used for this, 0x4b.
443 * @param tms_bits Holds the sequence of bits to send.
444 * @param tms_count Tells how many bits in the sequence.
445 * @param tdi_bit A single bit to pass on to TDI before the first TCK
446 * cycle and held static for the duration of TMS clocking.
448 * See the MPSSE spec referenced above.
450 static void clock_tms(uint8_t mpsse_cmd
, int tms_bits
, int tms_count
, bool tdi_bit
)
454 int tms_ndx
; /* bit index into tms_byte */
456 assert(tms_count
> 0);
458 DEBUG_JTAG_IO("mpsse cmd=%02x, tms_bits = 0x%08x, bit_count=%d",
459 mpsse_cmd
, tms_bits
, tms_count
);
461 for (tms_byte
= tms_ndx
= i
= 0; i
< tms_count
; ++i
, tms_bits
>>= 1) {
462 bool bit
= tms_bits
& 1;
465 tms_byte
|= (1 << tms_ndx
);
467 /* always do state transitions in public view */
468 tap_set_state(tap_state_transition(tap_get_state(), bit
));
470 /* we wrote a bit to tms_byte just above, increment bit index. if bit was zero
475 if (tms_ndx
== 7 || i
== tms_count
-1) {
476 buffer_write(mpsse_cmd
);
477 buffer_write(tms_ndx
- 1);
479 /* Bit 7 of the byte is passed on to TDI/DO before the first TCK/SK of
480 * TMS/CS and is held static for the duration of TMS/CS clocking.
482 buffer_write(tms_byte
| (tdi_bit
<< 7));
488 * Function get_tms_buffer_requirements
489 * returns what clock_tms() will consume if called with
492 static inline int get_tms_buffer_requirements(int bit_count
)
494 return ((bit_count
+ 6)/7) * 3;
498 * Function move_to_state
499 * moves the TAP controller from the current state to a
500 * \a goal_state through a path given by tap_get_tms_path(). State transition
501 * logging is performed by delegation to clock_tms().
503 * @param goal_state is the destination state for the move.
505 static void move_to_state(tap_state_t goal_state
)
507 tap_state_t start_state
= tap_get_state();
509 /* goal_state is 1/2 of a tuple/pair of states which allow convenient
510 * lookup of the required TMS pattern to move to this state from the start state.
513 /* do the 2 lookups */
514 int tms_bits
= tap_get_tms_path(start_state
, goal_state
);
515 int tms_count
= tap_get_tms_path_len(start_state
, goal_state
);
517 DEBUG_JTAG_IO("start=%s goal=%s", tap_state_name(start_state
), tap_state_name(goal_state
));
519 clock_tms(0x4b, tms_bits
, tms_count
, 0);
522 static int ft2232_write(uint8_t *buf
, int size
, uint32_t *bytes_written
)
524 #if BUILD_FT2232_FTD2XX == 1
526 DWORD dw_bytes_written
= 0;
527 status
= FT_Write(ftdih
, buf
, size
, &dw_bytes_written
);
528 if (status
!= FT_OK
) {
529 *bytes_written
= dw_bytes_written
;
530 LOG_ERROR("FT_Write returned: %s", ftd2xx_status_string(status
));
531 return ERROR_JTAG_DEVICE_ERROR
;
533 *bytes_written
= dw_bytes_written
;
535 #elif BUILD_FT2232_LIBFTDI == 1
536 int retval
= ftdi_write_data(&ftdic
, buf
, size
);
539 LOG_ERROR("ftdi_write_data: %s", ftdi_get_error_string(&ftdic
));
540 return ERROR_JTAG_DEVICE_ERROR
;
542 *bytes_written
= retval
;
546 if (*bytes_written
!= (uint32_t)size
)
547 return ERROR_JTAG_DEVICE_ERROR
;
552 static int ft2232_read(uint8_t *buf
, uint32_t size
, uint32_t *bytes_read
)
554 #if BUILD_FT2232_FTD2XX == 1
560 while ((*bytes_read
< size
) && timeout
--) {
561 status
= FT_Read(ftdih
, buf
+ *bytes_read
, size
-
562 *bytes_read
, &dw_bytes_read
);
563 if (status
!= FT_OK
) {
565 LOG_ERROR("FT_Read returned: %s", ftd2xx_status_string(status
));
566 return ERROR_JTAG_DEVICE_ERROR
;
568 *bytes_read
+= dw_bytes_read
;
571 #elif BUILD_FT2232_LIBFTDI == 1
573 int timeout
= LIBFTDI_READ_RETRY_COUNT
;
576 while ((*bytes_read
< size
) && timeout
--) {
577 retval
= ftdi_read_data(&ftdic
, buf
+ *bytes_read
, size
- *bytes_read
);
580 LOG_ERROR("ftdi_read_data: %s", ftdi_get_error_string(&ftdic
));
581 return ERROR_JTAG_DEVICE_ERROR
;
583 *bytes_read
+= retval
;
588 if (*bytes_read
< size
) {
589 LOG_ERROR("couldn't read enough bytes from "
590 "FT2232 device (%i < %i)",
591 (unsigned)*bytes_read
,
593 return ERROR_JTAG_DEVICE_ERROR
;
599 static bool ft2232_device_is_highspeed(void)
601 #if BUILD_FT2232_FTD2XX == 1
602 return (ftdi_device
== FT_DEVICE_2232H
) || (ftdi_device
== FT_DEVICE_4232H
)
603 #ifdef HAS_ENUM_FT232H
604 || (ftdi_device
== FT_DEVICE_232H
)
607 #elif BUILD_FT2232_LIBFTDI == 1
608 return (ftdi_device
== TYPE_2232H
|| ftdi_device
== TYPE_4232H
609 #ifdef HAS_ENUM_FT232H
610 || ftdi_device
== TYPE_232H
617 * Commands that only apply to the highspeed FTx232H devices (FT2232H, FT4232H, FT232H).
618 * See chapter 6 in http://www.ftdichip.com/Documents/AppNotes/
619 * AN_108_Command_Processor_for_MPSSE_and_MCU_Host_Bus_Emulation_Modes.pdf
622 static int ftx232h_adaptive_clocking(bool enable
)
624 uint8_t buf
= enable
? 0x96 : 0x97;
625 LOG_DEBUG("%2.2x", buf
);
627 uint32_t bytes_written
;
630 retval
= ft2232_write(&buf
, sizeof(buf
), &bytes_written
);
631 if (retval
!= ERROR_OK
) {
632 LOG_ERROR("couldn't write command to %s adaptive clocking"
633 , enable
? "enable" : "disable");
641 * Enable/disable the clk divide by 5 of the 60MHz master clock.
642 * This result in a JTAG clock speed range of 91.553Hz-6MHz
643 * respective 457.763Hz-30MHz.
645 static int ftx232h_clk_divide_by_5(bool enable
)
647 uint32_t bytes_written
;
648 uint8_t buf
= enable
? 0x8b : 0x8a;
650 if (ft2232_write(&buf
, sizeof(buf
), &bytes_written
) != ERROR_OK
) {
651 LOG_ERROR("couldn't write command to %s clk divide by 5"
652 , enable
? "enable" : "disable");
653 return ERROR_JTAG_INIT_FAILED
;
655 ft2232_max_tck
= enable
? FTDI_2232C_MAX_TCK
: FTDI_x232H_MAX_TCK
;
656 LOG_INFO("max TCK change to: %u kHz", ft2232_max_tck
);
661 static int ft2232_speed(int speed
)
665 uint32_t bytes_written
;
668 bool enable_adaptive_clocking
= (RTCK_SPEED
== speed
);
669 if (ft2232_device_is_highspeed())
670 retval
= ftx232h_adaptive_clocking(enable_adaptive_clocking
);
671 else if (enable_adaptive_clocking
) {
672 LOG_ERROR("ft2232 device %lu does not support RTCK"
673 , (long unsigned int)ftdi_device
);
677 if ((enable_adaptive_clocking
) || (ERROR_OK
!= retval
))
680 buf
[0] = 0x86; /* command "set divisor" */
681 buf
[1] = speed
& 0xff; /* valueL (0 = 6MHz, 1 = 3MHz, 2 = 2.0MHz, ...*/
682 buf
[2] = (speed
>> 8) & 0xff; /* valueH */
684 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
685 retval
= ft2232_write(buf
, sizeof(buf
), &bytes_written
);
686 if (retval
!= ERROR_OK
) {
687 LOG_ERROR("couldn't set FT2232 TCK speed");
694 static int ft2232_speed_div(int speed
, int *khz
)
696 /* Take a look in the FT2232 manual,
697 * AN2232C-01 Command Processor for
698 * MPSSE and MCU Host Bus. Chapter 3.8 */
700 *khz
= (RTCK_SPEED
== speed
) ? 0 : ft2232_max_tck
/ (1 + speed
);
705 static int ft2232_khz(int khz
, int *jtag_speed
)
708 if (ft2232_device_is_highspeed()) {
709 *jtag_speed
= RTCK_SPEED
;
712 LOG_DEBUG("RCLK not supported");
717 /* Take a look in the FT2232 manual,
718 * AN2232C-01 Command Processor for
719 * MPSSE and MCU Host Bus. Chapter 3.8
721 * We will calc here with a multiplier
722 * of 10 for better rounding later. */
724 /* Calc speed, (ft2232_max_tck / khz) - 1
725 * Use 65000 for better rounding */
726 *jtag_speed
= ((ft2232_max_tck
*10) / khz
) - 10;
728 /* Add 0.9 for rounding */
731 /* Calc real speed */
732 *jtag_speed
= *jtag_speed
/ 10;
734 /* Check if speed is greater than 0 */
738 /* Check max value */
739 if (*jtag_speed
> 0xFFFF)
740 *jtag_speed
= 0xFFFF;
745 static void ft2232_end_state(tap_state_t state
)
747 if (tap_is_state_stable(state
))
748 tap_set_end_state(state
);
750 LOG_ERROR("BUG: %s is not a stable end state", tap_state_name(state
));
755 static void ft2232_read_scan(enum scan_type type
, uint8_t *buffer
, int scan_size
)
757 int num_bytes
= (scan_size
+ 7) / 8;
758 int bits_left
= scan_size
;
761 while (num_bytes
-- > 1) {
762 buffer
[cur_byte
++] = buffer_read();
766 buffer
[cur_byte
] = 0x0;
768 /* There is one more partial byte left from the clock data in/out instructions */
770 buffer
[cur_byte
] = buffer_read() >> 1;
771 /* This shift depends on the length of the
772 *clock data to tms instruction, insterted
773 *at end of the scan, now fixed to a two
774 *step transition in ft2232_add_scan */
775 buffer
[cur_byte
] = (buffer
[cur_byte
] | (((buffer_read()) << 1) & 0x80)) >> (8 - bits_left
);
778 static void ft2232_debug_dump_buffer(void)
784 for (i
= 0; i
< ft2232_buffer_size
; i
++) {
785 line_p
+= snprintf(line_p
,
786 sizeof(line
) - (line_p
- line
),
790 LOG_DEBUG("%s", line
);
796 LOG_DEBUG("%s", line
);
799 static int ft2232_send_and_recv(struct jtag_command
*first
, struct jtag_command
*last
)
801 struct jtag_command
*cmd
;
806 uint32_t bytes_written
= 0;
807 uint32_t bytes_read
= 0;
809 #ifdef _DEBUG_USB_IO_
810 struct timeval start
, inter
, inter2
, end
;
811 struct timeval d_inter
, d_inter2
, d_end
;
814 #ifdef _DEBUG_USB_COMMS_
815 LOG_DEBUG("write buffer (size %i):", ft2232_buffer_size
);
816 ft2232_debug_dump_buffer();
819 #ifdef _DEBUG_USB_IO_
820 gettimeofday(&start
, NULL
);
823 retval
= ft2232_write(ft2232_buffer
, ft2232_buffer_size
, &bytes_written
);
824 if (retval
!= ERROR_OK
) {
825 LOG_ERROR("couldn't write MPSSE commands to FT2232");
829 #ifdef _DEBUG_USB_IO_
830 gettimeofday(&inter
, NULL
);
833 if (ft2232_expect_read
) {
834 /* FIXME this "timeout" is never changed ... */
835 int timeout
= LIBFTDI_READ_RETRY_COUNT
;
836 ft2232_buffer_size
= 0;
838 #ifdef _DEBUG_USB_IO_
839 gettimeofday(&inter2
, NULL
);
842 retval
= ft2232_read(ft2232_buffer
, ft2232_expect_read
, &bytes_read
);
843 if (retval
!= ERROR_OK
) {
844 LOG_ERROR("couldn't read from FT2232");
848 #ifdef _DEBUG_USB_IO_
849 gettimeofday(&end
, NULL
);
851 timeval_subtract(&d_inter
, &inter
, &start
);
852 timeval_subtract(&d_inter2
, &inter2
, &start
);
853 timeval_subtract(&d_end
, &end
, &start
);
855 LOG_INFO("inter: %u.%06u, inter2: %u.%06u end: %u.%06u",
856 (unsigned)d_inter
.tv_sec
, (unsigned)d_inter
.tv_usec
,
857 (unsigned)d_inter2
.tv_sec
, (unsigned)d_inter2
.tv_usec
,
858 (unsigned)d_end
.tv_sec
, (unsigned)d_end
.tv_usec
);
861 ft2232_buffer_size
= bytes_read
;
863 if (ft2232_expect_read
!= ft2232_buffer_size
) {
864 LOG_ERROR("ft2232_expect_read (%i) != "
865 "ft2232_buffer_size (%i) "
869 LIBFTDI_READ_RETRY_COUNT
- timeout
);
870 ft2232_debug_dump_buffer();
875 #ifdef _DEBUG_USB_COMMS_
876 LOG_DEBUG("read buffer (%i retries): %i bytes",
877 LIBFTDI_READ_RETRY_COUNT
- timeout
,
879 ft2232_debug_dump_buffer();
883 ft2232_expect_read
= 0;
884 ft2232_read_pointer
= 0;
886 /* return ERROR_OK, unless a jtag_read_buffer returns a failed check
887 * that wasn't handled by a caller-provided error handler
892 while (cmd
!= last
) {
895 type
= jtag_scan_type(cmd
->cmd
.scan
);
896 if (type
!= SCAN_OUT
) {
897 scan_size
= jtag_scan_size(cmd
->cmd
.scan
);
898 buffer
= calloc(DIV_ROUND_UP(scan_size
, 8), 1);
899 ft2232_read_scan(type
, buffer
, scan_size
);
900 if (jtag_read_buffer(buffer
, cmd
->cmd
.scan
) != ERROR_OK
)
901 retval
= ERROR_JTAG_QUEUE_FAILED
;
913 ft2232_buffer_size
= 0;
919 * Function ft2232_add_pathmove
920 * moves the TAP controller from the current state to a new state through the
921 * given path, where path is an array of tap_state_t's.
923 * @param path is an array of tap_stat_t which gives the states to traverse through
924 * ending with the last state at path[num_states-1]
925 * @param num_states is the count of state steps to move through
927 static void ft2232_add_pathmove(tap_state_t
*path
, int num_states
)
931 assert((unsigned) num_states
<= 32u); /* tms_bits only holds 32 bits */
935 /* this loop verifies that the path is legal and logs each state in the path */
937 unsigned char tms_byte
= 0; /* zero this on each MPSSE batch */
939 int num_states_batch
= num_states
> 7 ? 7 : num_states
;
941 /* command "Clock Data to TMS/CS Pin (no Read)" */
944 /* number of states remaining */
945 buffer_write(num_states_batch
- 1);
947 while (num_states_batch
--) {
948 /* either TMS=0 or TMS=1 must work ... */
949 if (tap_state_transition(tap_get_state(), false) == path
[state_count
])
950 buf_set_u32(&tms_byte
, bit_count
++, 1, 0x0);
951 else if (tap_state_transition(tap_get_state(), true) == path
[state_count
])
952 buf_set_u32(&tms_byte
, bit_count
++, 1, 0x1);
954 /* ... or else the caller goofed BADLY */
956 LOG_ERROR("BUG: %s -> %s isn't a valid "
957 "TAP state transition",
958 tap_state_name(tap_get_state()),
959 tap_state_name(path
[state_count
]));
963 tap_set_state(path
[state_count
]);
968 buffer_write(tms_byte
);
970 tap_set_end_state(tap_get_state());
973 static void ft2232_add_scan(bool ir_scan
, enum scan_type type
, uint8_t *buffer
, int scan_size
)
975 int num_bytes
= (scan_size
+ 7) / 8;
976 int bits_left
= scan_size
;
981 if (tap_get_state() != TAP_DRSHIFT
)
982 move_to_state(TAP_DRSHIFT
);
984 if (tap_get_state() != TAP_IRSHIFT
)
985 move_to_state(TAP_IRSHIFT
);
988 /* add command for complete bytes */
989 while (num_bytes
> 1) {
991 if (type
== SCAN_IO
) {
992 /* Clock Data Bytes In and Out LSB First */
994 /* LOG_DEBUG("added TDI bytes (io %i)", num_bytes); */
995 } else if (type
== SCAN_OUT
) {
996 /* Clock Data Bytes Out on -ve Clock Edge LSB First (no Read) */
998 /* LOG_DEBUG("added TDI bytes (o)"); */
999 } else if (type
== SCAN_IN
) {
1000 /* Clock Data Bytes In on +ve Clock Edge LSB First (no Write) */
1002 /* LOG_DEBUG("added TDI bytes (i %i)", num_bytes); */
1005 thisrun_bytes
= (num_bytes
> 65537) ? 65536 : (num_bytes
- 1);
1006 num_bytes
-= thisrun_bytes
;
1008 buffer_write((uint8_t) (thisrun_bytes
- 1));
1009 buffer_write((uint8_t) ((thisrun_bytes
- 1) >> 8));
1011 if (type
!= SCAN_IN
) {
1012 /* add complete bytes */
1013 while (thisrun_bytes
-- > 0) {
1014 buffer_write(buffer
[cur_byte
++]);
1017 } else /* (type == SCAN_IN) */
1018 bits_left
-= 8 * (thisrun_bytes
);
1021 /* the most signifcant bit is scanned during TAP movement */
1022 if (type
!= SCAN_IN
)
1023 last_bit
= (buffer
[cur_byte
] >> (bits_left
- 1)) & 0x1;
1027 /* process remaining bits but the last one */
1028 if (bits_left
> 1) {
1029 if (type
== SCAN_IO
) {
1030 /* Clock Data Bits In and Out LSB First */
1032 /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
1033 } else if (type
== SCAN_OUT
) {
1034 /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
1036 /* LOG_DEBUG("added TDI bits (o)"); */
1037 } else if (type
== SCAN_IN
) {
1038 /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
1040 /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
1043 buffer_write(bits_left
- 2);
1044 if (type
!= SCAN_IN
)
1045 buffer_write(buffer
[cur_byte
]);
1048 if ((ir_scan
&& (tap_get_end_state() == TAP_IRSHIFT
))
1049 || (!ir_scan
&& (tap_get_end_state() == TAP_DRSHIFT
))) {
1050 if (type
== SCAN_IO
) {
1051 /* Clock Data Bits In and Out LSB First */
1053 /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
1054 } else if (type
== SCAN_OUT
) {
1055 /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
1057 /* LOG_DEBUG("added TDI bits (o)"); */
1058 } else if (type
== SCAN_IN
) {
1059 /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
1061 /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
1064 buffer_write(last_bit
);
1070 /* move from Shift-IR/DR to end state */
1071 if (type
!= SCAN_OUT
) {
1072 /* We always go to the PAUSE state in two step at the end of an IN or IO
1074 * This must be coordinated with the bit shifts in ft2232_read_scan */
1077 /* Clock Data to TMS/CS Pin with Read */
1080 tms_bits
= tap_get_tms_path(tap_get_state(), tap_get_end_state());
1081 tms_count
= tap_get_tms_path_len(tap_get_state(), tap_get_end_state());
1082 /* Clock Data to TMS/CS Pin (no Read) */
1086 DEBUG_JTAG_IO("finish %s", (type
== SCAN_OUT
) ? "without read" : "via PAUSE");
1087 clock_tms(mpsse_cmd
, tms_bits
, tms_count
, last_bit
);
1090 if (tap_get_state() != tap_get_end_state())
1091 move_to_state(tap_get_end_state());
1094 static int ft2232_large_scan(struct scan_command
*cmd
,
1095 enum scan_type type
,
1099 int num_bytes
= (scan_size
+ 7) / 8;
1100 int bits_left
= scan_size
;
1103 uint8_t *receive_buffer
= malloc(DIV_ROUND_UP(scan_size
, 8));
1104 uint8_t *receive_pointer
= receive_buffer
;
1105 uint32_t bytes_written
;
1106 uint32_t bytes_read
;
1108 int thisrun_read
= 0;
1111 LOG_ERROR("BUG: large IR scans are not supported");
1115 if (tap_get_state() != TAP_DRSHIFT
)
1116 move_to_state(TAP_DRSHIFT
);
1118 retval
= ft2232_write(ft2232_buffer
, ft2232_buffer_size
, &bytes_written
);
1119 if (retval
!= ERROR_OK
) {
1120 LOG_ERROR("couldn't write MPSSE commands to FT2232");
1123 LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i",
1124 ft2232_buffer_size
, (int)bytes_written
);
1125 ft2232_buffer_size
= 0;
1127 /* add command for complete bytes */
1128 while (num_bytes
> 1) {
1131 if (type
== SCAN_IO
) {
1132 /* Clock Data Bytes In and Out LSB First */
1134 /* LOG_DEBUG("added TDI bytes (io %i)", num_bytes); */
1135 } else if (type
== SCAN_OUT
) {
1136 /* Clock Data Bytes Out on -ve Clock Edge LSB First (no Read) */
1138 /* LOG_DEBUG("added TDI bytes (o)"); */
1139 } else if (type
== SCAN_IN
) {
1140 /* Clock Data Bytes In on +ve Clock Edge LSB First (no Write) */
1142 /* LOG_DEBUG("added TDI bytes (i %i)", num_bytes); */
1145 thisrun_bytes
= (num_bytes
> 65537) ? 65536 : (num_bytes
- 1);
1146 thisrun_read
= thisrun_bytes
;
1147 num_bytes
-= thisrun_bytes
;
1148 buffer_write((uint8_t) (thisrun_bytes
- 1));
1149 buffer_write((uint8_t) ((thisrun_bytes
- 1) >> 8));
1151 if (type
!= SCAN_IN
) {
1152 /* add complete bytes */
1153 while (thisrun_bytes
-- > 0) {
1154 buffer_write(buffer
[cur_byte
]);
1158 } else /* (type == SCAN_IN) */
1159 bits_left
-= 8 * (thisrun_bytes
);
1161 retval
= ft2232_write(ft2232_buffer
, ft2232_buffer_size
, &bytes_written
);
1162 if (retval
!= ERROR_OK
) {
1163 LOG_ERROR("couldn't write MPSSE commands to FT2232");
1166 LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i",
1168 (int)bytes_written
);
1169 ft2232_buffer_size
= 0;
1171 if (type
!= SCAN_OUT
) {
1172 retval
= ft2232_read(receive_pointer
, thisrun_read
, &bytes_read
);
1173 if (retval
!= ERROR_OK
) {
1174 LOG_ERROR("couldn't read from FT2232");
1177 LOG_DEBUG("thisrun_read: %i, bytes_read: %i",
1180 receive_pointer
+= bytes_read
;
1186 /* the most signifcant bit is scanned during TAP movement */
1187 if (type
!= SCAN_IN
)
1188 last_bit
= (buffer
[cur_byte
] >> (bits_left
- 1)) & 0x1;
1192 /* process remaining bits but the last one */
1193 if (bits_left
> 1) {
1194 if (type
== SCAN_IO
) {
1195 /* Clock Data Bits In and Out LSB First */
1197 /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
1198 } else if (type
== SCAN_OUT
) {
1199 /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
1201 /* LOG_DEBUG("added TDI bits (o)"); */
1202 } else if (type
== SCAN_IN
) {
1203 /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
1205 /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
1207 buffer_write(bits_left
- 2);
1208 if (type
!= SCAN_IN
)
1209 buffer_write(buffer
[cur_byte
]);
1211 if (type
!= SCAN_OUT
)
1215 if (tap_get_end_state() == TAP_DRSHIFT
) {
1216 if (type
== SCAN_IO
) {
1217 /* Clock Data Bits In and Out LSB First */
1219 /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
1220 } else if (type
== SCAN_OUT
) {
1221 /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
1223 /* LOG_DEBUG("added TDI bits (o)"); */
1224 } else if (type
== SCAN_IN
) {
1225 /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
1227 /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
1230 buffer_write(last_bit
);
1232 int tms_bits
= tap_get_tms_path(tap_get_state(), tap_get_end_state());
1233 int tms_count
= tap_get_tms_path_len(tap_get_state(), tap_get_end_state());
1236 /* move from Shift-IR/DR to end state */
1237 if (type
!= SCAN_OUT
) {
1238 /* Clock Data to TMS/CS Pin with Read */
1240 /* LOG_DEBUG("added TMS scan (read)"); */
1242 /* Clock Data to TMS/CS Pin (no Read) */
1244 /* LOG_DEBUG("added TMS scan (no read)"); */
1247 DEBUG_JTAG_IO("finish, %s", (type
== SCAN_OUT
) ? "no read" : "read");
1248 clock_tms(mpsse_cmd
, tms_bits
, tms_count
, last_bit
);
1251 if (type
!= SCAN_OUT
)
1254 retval
= ft2232_write(ft2232_buffer
, ft2232_buffer_size
, &bytes_written
);
1255 if (retval
!= ERROR_OK
) {
1256 LOG_ERROR("couldn't write MPSSE commands to FT2232");
1259 LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i",
1261 (int)bytes_written
);
1262 ft2232_buffer_size
= 0;
1264 if (type
!= SCAN_OUT
) {
1265 retval
= ft2232_read(receive_pointer
, thisrun_read
, &bytes_read
);
1266 if (retval
!= ERROR_OK
) {
1267 LOG_ERROR("couldn't read from FT2232");
1270 LOG_DEBUG("thisrun_read: %i, bytes_read: %i",
1278 static int ft2232_predict_scan_out(int scan_size
, enum scan_type type
)
1280 int predicted_size
= 3;
1281 int num_bytes
= (scan_size
- 1) / 8;
1283 if (tap_get_state() != TAP_DRSHIFT
)
1284 predicted_size
+= get_tms_buffer_requirements(
1285 tap_get_tms_path_len(tap_get_state(), TAP_DRSHIFT
));
1287 if (type
== SCAN_IN
) { /* only from device to host */
1288 /* complete bytes */
1289 predicted_size
+= DIV_ROUND_UP(num_bytes
, 65536) * 3;
1291 /* remaining bits - 1 (up to 7) */
1292 predicted_size
+= ((scan_size
- 1) % 8) ? 2 : 0;
1293 } else {/* host to device, or bidirectional
1295 predicted_size
+= num_bytes
+ DIV_ROUND_UP(num_bytes
, 65536) * 3;
1297 /* remaining bits -1 (up to 7) */
1298 predicted_size
+= ((scan_size
- 1) % 8) ? 3 : 0;
1301 return predicted_size
;
1304 static int ft2232_predict_scan_in(int scan_size
, enum scan_type type
)
1306 int predicted_size
= 0;
1308 if (type
!= SCAN_OUT
) {
1309 /* complete bytes */
1311 (DIV_ROUND_UP(scan_size
, 8) > 1) ? (DIV_ROUND_UP(scan_size
, 8) - 1) : 0;
1313 /* remaining bits - 1 */
1314 predicted_size
+= ((scan_size
- 1) % 8) ? 1 : 0;
1316 /* last bit (from TMS scan) */
1317 predicted_size
+= 1;
1320 /* LOG_DEBUG("scan_size: %i, predicted_size: %i", scan_size, predicted_size); */
1322 return predicted_size
;
1325 /* semi-generic FT2232/FT4232 reset code */
1326 static void ftx23_reset(int trst
, int srst
)
1328 enum reset_types jtag_reset_config
= jtag_get_reset_config();
1330 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
1331 low_direction
|= nTRSTnOE
; /* switch to output pin (output is low) */
1333 low_output
&= ~nTRST
; /* switch output low */
1334 } else if (trst
== 0) {
1335 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
1336 low_direction
&= ~nTRSTnOE
; /* switch to input pin (high-Z + internal
1337 *and external pullup) */
1339 low_output
|= nTRST
; /* switch output high */
1343 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
1344 low_output
&= ~nSRST
; /* switch output low */
1346 low_direction
|= nSRSTnOE
; /* switch to output pin (output is low) */
1347 } else if (srst
== 0) {
1348 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
1349 low_output
|= nSRST
; /* switch output high */
1351 low_direction
&= ~nSRSTnOE
; /* switch to input pin (high-Z) */
1354 /* command "set data bits low byte" */
1356 buffer_write(low_output
);
1357 buffer_write(low_direction
);
1360 static void jtagkey_reset(int trst
, int srst
)
1362 enum reset_types jtag_reset_config
= jtag_get_reset_config();
1364 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
1365 high_output
&= ~nTRSTnOE
;
1367 high_output
&= ~nTRST
;
1368 } else if (trst
== 0) {
1369 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
1370 high_output
|= nTRSTnOE
;
1372 high_output
|= nTRST
;
1376 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
1377 high_output
&= ~nSRST
;
1379 high_output
&= ~nSRSTnOE
;
1380 } else if (srst
== 0) {
1381 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
1382 high_output
|= nSRST
;
1384 high_output
|= nSRSTnOE
;
1387 /* command "set data bits high byte" */
1389 buffer_write(high_output
);
1390 buffer_write(high_direction
);
1391 LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x",
1398 static void olimex_jtag_reset(int trst
, int srst
)
1400 enum reset_types jtag_reset_config
= jtag_get_reset_config();
1402 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
1403 high_output
&= ~nTRSTnOE
;
1405 high_output
&= ~nTRST
;
1406 } else if (trst
== 0) {
1407 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
1408 high_output
|= nTRSTnOE
;
1410 high_output
|= nTRST
;
1414 high_output
|= nSRST
;
1416 high_output
&= ~nSRST
;
1418 /* command "set data bits high byte" */
1420 buffer_write(high_output
);
1421 buffer_write(high_direction
);
1422 LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x",
1429 static void axm0432_jtag_reset(int trst
, int srst
)
1432 tap_set_state(TAP_RESET
);
1433 high_output
&= ~nTRST
;
1434 } else if (trst
== 0)
1435 high_output
|= nTRST
;
1438 high_output
&= ~nSRST
;
1440 high_output
|= nSRST
;
1442 /* command "set data bits low byte" */
1444 buffer_write(high_output
);
1445 buffer_write(high_direction
);
1446 LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x",
1453 static void flyswatter_reset(int trst
, int srst
)
1456 low_output
&= ~nTRST
;
1458 low_output
|= nTRST
;
1461 low_output
|= nSRST
;
1463 low_output
&= ~nSRST
;
1465 /* command "set data bits low byte" */
1467 buffer_write(low_output
);
1468 buffer_write(low_direction
);
1469 LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x",
1476 static void flyswatter1_reset(int trst
, int srst
)
1478 flyswatter_reset(trst
, srst
);
1481 static void flyswatter2_reset(int trst
, int srst
)
1483 flyswatter_reset(trst
, !srst
);
1486 static void minimodule_reset(int trst
, int srst
)
1489 low_output
&= ~nSRST
;
1491 low_output
|= nSRST
;
1493 /* command "set data bits low byte" */
1495 buffer_write(low_output
);
1496 buffer_write(low_direction
);
1497 LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x",
1504 static void turtle_reset(int trst
, int srst
)
1509 low_output
|= nSRST
;
1511 low_output
&= ~nSRST
;
1513 /* command "set data bits low byte" */
1515 buffer_write(low_output
);
1516 buffer_write(low_direction
);
1517 LOG_DEBUG("srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x",
1523 static void comstick_reset(int trst
, int srst
)
1526 high_output
&= ~nTRST
;
1528 high_output
|= nTRST
;
1531 high_output
&= ~nSRST
;
1533 high_output
|= nSRST
;
1535 /* command "set data bits high byte" */
1537 buffer_write(high_output
);
1538 buffer_write(high_direction
);
1539 LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x",
1546 static void stm32stick_reset(int trst
, int srst
)
1549 high_output
&= ~nTRST
;
1551 high_output
|= nTRST
;
1554 low_output
&= ~nSRST
;
1556 low_output
|= nSRST
;
1558 /* command "set data bits low byte" */
1560 buffer_write(low_output
);
1561 buffer_write(low_direction
);
1563 /* command "set data bits high byte" */
1565 buffer_write(high_output
);
1566 buffer_write(high_direction
);
1567 LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x",
1574 static void sheevaplug_reset(int trst
, int srst
)
1577 high_output
&= ~nTRST
;
1579 high_output
|= nTRST
;
1582 high_output
&= ~nSRSTnOE
;
1584 high_output
|= nSRSTnOE
;
1586 /* command "set data bits high byte" */
1588 buffer_write(high_output
);
1589 buffer_write(high_direction
);
1590 LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x",
1597 static void redbee_reset(int trst
, int srst
)
1600 tap_set_state(TAP_RESET
);
1601 high_output
&= ~nTRST
;
1602 } else if (trst
== 0)
1603 high_output
|= nTRST
;
1606 high_output
&= ~nSRST
;
1608 high_output
|= nSRST
;
1610 /* command "set data bits low byte" */
1612 buffer_write(high_output
);
1613 buffer_write(high_direction
);
1614 LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, "
1615 "high_direction: 0x%2.2x", trst
, srst
, high_output
,
1619 static void xds100v2_reset(int trst
, int srst
)
1622 tap_set_state(TAP_RESET
);
1623 high_output
&= ~nTRST
;
1624 } else if (trst
== 0)
1625 high_output
|= nTRST
;
1628 high_output
|= nSRST
;
1630 high_output
&= ~nSRST
;
1632 /* command "set data bits low byte" */
1634 buffer_write(high_output
);
1635 buffer_write(high_direction
);
1636 LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, "
1637 "high_direction: 0x%2.2x", trst
, srst
, high_output
,
1641 static int ft2232_execute_runtest(struct jtag_command
*cmd
)
1645 int predicted_size
= 0;
1648 DEBUG_JTAG_IO("runtest %i cycles, end in %s",
1649 cmd
->cmd
.runtest
->num_cycles
,
1650 tap_state_name(cmd
->cmd
.runtest
->end_state
));
1652 /* only send the maximum buffer size that FT2232C can handle */
1654 if (tap_get_state() != TAP_IDLE
)
1655 predicted_size
+= 3;
1656 predicted_size
+= 3 * DIV_ROUND_UP(cmd
->cmd
.runtest
->num_cycles
, 7);
1657 if (cmd
->cmd
.runtest
->end_state
!= TAP_IDLE
)
1658 predicted_size
+= 3;
1659 if (tap_get_end_state() != TAP_IDLE
)
1660 predicted_size
+= 3;
1661 if (ft2232_buffer_size
+ predicted_size
+ 1 > FT2232_BUFFER_SIZE
) {
1662 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1663 retval
= ERROR_JTAG_QUEUE_FAILED
;
1667 if (tap_get_state() != TAP_IDLE
) {
1668 move_to_state(TAP_IDLE
);
1671 i
= cmd
->cmd
.runtest
->num_cycles
;
1673 /* there are no state transitions in this code, so omit state tracking */
1675 /* command "Clock Data to TMS/CS Pin (no Read)" */
1679 buffer_write((i
> 7) ? 6 : (i
- 1));
1684 i
-= (i
> 7) ? 7 : i
;
1685 /* LOG_DEBUG("added TMS scan (no read)"); */
1688 ft2232_end_state(cmd
->cmd
.runtest
->end_state
);
1690 if (tap_get_state() != tap_get_end_state())
1691 move_to_state(tap_get_end_state());
1694 DEBUG_JTAG_IO("runtest: %i, end in %s",
1695 cmd
->cmd
.runtest
->num_cycles
,
1696 tap_state_name(tap_get_end_state()));
1700 static int ft2232_execute_statemove(struct jtag_command
*cmd
)
1702 int predicted_size
= 0;
1703 int retval
= ERROR_OK
;
1705 DEBUG_JTAG_IO("statemove end in %s",
1706 tap_state_name(cmd
->cmd
.statemove
->end_state
));
1708 /* only send the maximum buffer size that FT2232C can handle */
1710 if (ft2232_buffer_size
+ predicted_size
+ 1 > FT2232_BUFFER_SIZE
) {
1711 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1712 retval
= ERROR_JTAG_QUEUE_FAILED
;
1716 ft2232_end_state(cmd
->cmd
.statemove
->end_state
);
1718 /* For TAP_RESET, ignore the current recorded state. It's often
1719 * wrong at server startup, and this transation is critical whenever
1722 if (tap_get_end_state() == TAP_RESET
) {
1723 clock_tms(0x4b, 0xff, 5, 0);
1726 /* shortest-path move to desired end state */
1727 } else if (tap_get_state() != tap_get_end_state()) {
1728 move_to_state(tap_get_end_state());
1736 * Clock a bunch of TMS (or SWDIO) transitions, to change the JTAG
1737 * (or SWD) state machine.
1739 static int ft2232_execute_tms(struct jtag_command
*cmd
)
1741 int retval
= ERROR_OK
;
1742 unsigned num_bits
= cmd
->cmd
.tms
->num_bits
;
1743 const uint8_t *bits
= cmd
->cmd
.tms
->bits
;
1746 DEBUG_JTAG_IO("TMS: %d bits", num_bits
);
1748 /* only send the maximum buffer size that FT2232C can handle */
1749 count
= 3 * DIV_ROUND_UP(num_bits
, 4);
1750 if (ft2232_buffer_size
+ 3*count
+ 1 > FT2232_BUFFER_SIZE
) {
1751 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1752 retval
= ERROR_JTAG_QUEUE_FAILED
;
1758 /* Shift out in batches of at most 6 bits; there's a report of an
1759 * FT2232 bug in this area, where shifting exactly 7 bits can make
1760 * problems with TMS signaling for the last clock cycle:
1762 * http://developer.intra2net.com/mailarchive/html/
1763 * libftdi/2009/msg00292.html
1765 * Command 0x4b is: "Clock Data to TMS/CS Pin (no Read)"
1767 * Note that pathmoves in JTAG are not often seven bits, so that
1768 * isn't a particularly likely situation outside of "special"
1769 * signaling such as switching between JTAG and SWD modes.
1772 if (num_bits
<= 6) {
1774 buffer_write(num_bits
- 1);
1775 buffer_write(*bits
& 0x3f);
1779 /* Yes, this is lazy ... we COULD shift out more data
1780 * bits per operation, but doing it in nybbles is easy
1784 buffer_write(*bits
& 0xf);
1787 count
= (num_bits
> 4) ? 4 : num_bits
;
1790 buffer_write(count
- 1);
1791 buffer_write((*bits
>> 4) & 0xf);
1801 static int ft2232_execute_pathmove(struct jtag_command
*cmd
)
1803 int predicted_size
= 0;
1804 int retval
= ERROR_OK
;
1806 tap_state_t
*path
= cmd
->cmd
.pathmove
->path
;
1807 int num_states
= cmd
->cmd
.pathmove
->num_states
;
1809 DEBUG_JTAG_IO("pathmove: %i states, current: %s end: %s", num_states
,
1810 tap_state_name(tap_get_state()),
1811 tap_state_name(path
[num_states
-1]));
1813 /* only send the maximum buffer size that FT2232C can handle */
1814 predicted_size
= 3 * DIV_ROUND_UP(num_states
, 7);
1815 if (ft2232_buffer_size
+ predicted_size
+ 1 > FT2232_BUFFER_SIZE
) {
1816 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1817 retval
= ERROR_JTAG_QUEUE_FAILED
;
1823 ft2232_add_pathmove(path
, num_states
);
1829 static int ft2232_execute_scan(struct jtag_command
*cmd
)
1832 int scan_size
; /* size of IR or DR scan */
1833 int predicted_size
= 0;
1834 int retval
= ERROR_OK
;
1836 enum scan_type type
= jtag_scan_type(cmd
->cmd
.scan
);
1838 DEBUG_JTAG_IO("%s type:%d", cmd
->cmd
.scan
->ir_scan
? "IRSCAN" : "DRSCAN", type
);
1840 scan_size
= jtag_build_buffer(cmd
->cmd
.scan
, &buffer
);
1842 predicted_size
= ft2232_predict_scan_out(scan_size
, type
);
1843 if ((predicted_size
+ 1) > FT2232_BUFFER_SIZE
) {
1844 LOG_DEBUG("oversized ft2232 scan (predicted_size > FT2232_BUFFER_SIZE)");
1845 /* unsent commands before this */
1846 if (first_unsent
!= cmd
)
1847 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1848 retval
= ERROR_JTAG_QUEUE_FAILED
;
1850 /* current command */
1851 ft2232_end_state(cmd
->cmd
.scan
->end_state
);
1852 ft2232_large_scan(cmd
->cmd
.scan
, type
, buffer
, scan_size
);
1854 first_unsent
= cmd
->next
;
1858 } else if (ft2232_buffer_size
+ predicted_size
+ 1 > FT2232_BUFFER_SIZE
) {
1860 "ft2232 buffer size reached, sending queued commands (first_unsent: %p, cmd: %p)",
1863 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1864 retval
= ERROR_JTAG_QUEUE_FAILED
;
1868 ft2232_expect_read
+= ft2232_predict_scan_in(scan_size
, type
);
1869 /* LOG_DEBUG("new read size: %i", ft2232_expect_read); */
1870 ft2232_end_state(cmd
->cmd
.scan
->end_state
);
1871 ft2232_add_scan(cmd
->cmd
.scan
->ir_scan
, type
, buffer
, scan_size
);
1875 DEBUG_JTAG_IO("%s scan, %i bits, end in %s",
1876 (cmd
->cmd
.scan
->ir_scan
) ? "IR" : "DR", scan_size
,
1877 tap_state_name(tap_get_end_state()));
1882 static int ft2232_execute_reset(struct jtag_command
*cmd
)
1885 int predicted_size
= 0;
1888 DEBUG_JTAG_IO("reset trst: %i srst %i",
1889 cmd
->cmd
.reset
->trst
, cmd
->cmd
.reset
->srst
);
1891 /* only send the maximum buffer size that FT2232C can handle */
1893 if (ft2232_buffer_size
+ predicted_size
+ 1 > FT2232_BUFFER_SIZE
) {
1894 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1895 retval
= ERROR_JTAG_QUEUE_FAILED
;
1900 if ((cmd
->cmd
.reset
->trst
== 1) ||
1901 (cmd
->cmd
.reset
->srst
&& (jtag_get_reset_config() & RESET_SRST_PULLS_TRST
)))
1902 tap_set_state(TAP_RESET
);
1904 layout
->reset(cmd
->cmd
.reset
->trst
, cmd
->cmd
.reset
->srst
);
1907 DEBUG_JTAG_IO("trst: %i, srst: %i",
1908 cmd
->cmd
.reset
->trst
, cmd
->cmd
.reset
->srst
);
1912 static int ft2232_execute_sleep(struct jtag_command
*cmd
)
1917 DEBUG_JTAG_IO("sleep %" PRIi32
, cmd
->cmd
.sleep
->us
);
1919 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1920 retval
= ERROR_JTAG_QUEUE_FAILED
;
1921 first_unsent
= cmd
->next
;
1922 jtag_sleep(cmd
->cmd
.sleep
->us
);
1923 DEBUG_JTAG_IO("sleep %" PRIi32
" usec while in %s",
1925 tap_state_name(tap_get_state()));
1929 static int ft2232_execute_stableclocks(struct jtag_command
*cmd
)
1934 /* this is only allowed while in a stable state. A check for a stable
1935 * state was done in jtag_add_clocks()
1937 if (ft2232_stableclocks(cmd
->cmd
.stableclocks
->num_cycles
, cmd
) != ERROR_OK
)
1938 retval
= ERROR_JTAG_QUEUE_FAILED
;
1939 DEBUG_JTAG_IO("clocks %i while in %s",
1940 cmd
->cmd
.stableclocks
->num_cycles
,
1941 tap_state_name(tap_get_state()));
1945 static int ft2232_execute_command(struct jtag_command
*cmd
)
1949 switch (cmd
->type
) {
1951 retval
= ft2232_execute_reset(cmd
);
1954 retval
= ft2232_execute_runtest(cmd
);
1956 case JTAG_TLR_RESET
:
1957 retval
= ft2232_execute_statemove(cmd
);
1960 retval
= ft2232_execute_pathmove(cmd
);
1963 retval
= ft2232_execute_scan(cmd
);
1966 retval
= ft2232_execute_sleep(cmd
);
1968 case JTAG_STABLECLOCKS
:
1969 retval
= ft2232_execute_stableclocks(cmd
);
1972 retval
= ft2232_execute_tms(cmd
);
1975 LOG_ERROR("BUG: unknown JTAG command type encountered");
1976 retval
= ERROR_JTAG_QUEUE_FAILED
;
1982 static int ft2232_execute_queue(void)
1984 struct jtag_command
*cmd
= jtag_command_queue
; /* currently processed command */
1987 first_unsent
= cmd
; /* next command that has to be sent */
1990 /* return ERROR_OK, unless ft2232_send_and_recv reports a failed check
1991 * that wasn't handled by a caller-provided error handler
1995 ft2232_buffer_size
= 0;
1996 ft2232_expect_read
= 0;
1998 /* blink, if the current layout has that feature */
2003 /* fill the write buffer with the desired command */
2004 if (ft2232_execute_command(cmd
) != ERROR_OK
)
2005 retval
= ERROR_JTAG_QUEUE_FAILED
;
2006 /* Start reading input before FT2232 TX buffer fills up.
2007 * Sometimes this happens because we don't know the
2008 * length of the last command before we execute it. So
2009 * we simple inform the user.
2013 if (ft2232_expect_read
>= FT2232_BUFFER_READ_QUEUE_SIZE
) {
2014 if (ft2232_expect_read
> (FT2232_BUFFER_READ_QUEUE_SIZE
+1))
2015 LOG_DEBUG("read buffer size looks too high %d/%d",
2017 (FT2232_BUFFER_READ_QUEUE_SIZE
+1));
2018 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
2019 retval
= ERROR_JTAG_QUEUE_FAILED
;
2024 if (require_send
> 0)
2025 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
2026 retval
= ERROR_JTAG_QUEUE_FAILED
;
2031 #if BUILD_FT2232_FTD2XX == 1
2032 static int ft2232_init_ftd2xx(uint16_t vid
, uint16_t pid
, int more
, int *try_more
)
2036 char SerialNumber
[16];
2037 char Description
[64];
2038 DWORD openex_flags
= 0;
2039 char *openex_string
= NULL
;
2040 uint8_t latency_timer
;
2042 if (layout
== NULL
) {
2043 LOG_WARNING("No ft2232 layout specified'");
2044 return ERROR_JTAG_INIT_FAILED
;
2047 LOG_DEBUG("'ft2232' interface using FTD2XX with '%s' layout (%4.4x:%4.4x)",
2048 layout
->name
, vid
, pid
);
2051 /* Add non-standard Vid/Pid to the linux driver */
2052 status
= FT_SetVIDPID(vid
, pid
);
2053 if (status
!= FT_OK
)
2054 LOG_WARNING("couldn't add %4.4x:%4.4x", vid
, pid
);
2058 if (ft2232_device_desc
&& ft2232_serial
) {
2060 "can't open by device description and serial number, giving precedence to serial");
2061 ft2232_device_desc
= NULL
;
2064 if (ft2232_device_desc
) {
2065 openex_string
= ft2232_device_desc
;
2066 openex_flags
= FT_OPEN_BY_DESCRIPTION
;
2067 } else if (ft2232_serial
) {
2068 openex_string
= ft2232_serial
;
2069 openex_flags
= FT_OPEN_BY_SERIAL_NUMBER
;
2071 LOG_ERROR("neither device description nor serial number specified");
2073 "please add \"ft2232_device_desc <string>\" or \"ft2232_serial <string>\" to your .cfg file");
2075 return ERROR_JTAG_INIT_FAILED
;
2078 status
= FT_OpenEx(openex_string
, openex_flags
, &ftdih
);
2079 if (status
!= FT_OK
) {
2080 /* under Win32, the FTD2XX driver appends an "A" to the end
2081 * of the description, if we tried by the desc, then
2082 * try by the alternate "A" description. */
2083 if (openex_string
== ft2232_device_desc
) {
2084 /* Try the alternate method. */
2085 openex_string
= ft2232_device_desc_A
;
2086 status
= FT_OpenEx(openex_string
, openex_flags
, &ftdih
);
2087 if (status
== FT_OK
) {
2088 /* yea, the "alternate" method worked! */
2090 /* drat, give the user a meaningfull message.
2091 * telling the use we tried *BOTH* methods. */
2092 LOG_WARNING("Unable to open FTDI Device tried: '%s' and '%s'",
2094 ft2232_device_desc_A
);
2099 if (status
!= FT_OK
) {
2103 LOG_WARNING("unable to open ftdi device (trying more): %s",
2104 ftd2xx_status_string(status
));
2106 return ERROR_JTAG_INIT_FAILED
;
2108 LOG_ERROR("unable to open ftdi device: %s",
2109 ftd2xx_status_string(status
));
2110 status
= FT_ListDevices(&num_devices
, NULL
, FT_LIST_NUMBER_ONLY
);
2111 if (status
== FT_OK
) {
2112 char **desc_array
= malloc(sizeof(char *) * (num_devices
+ 1));
2115 for (i
= 0; i
< num_devices
; i
++)
2116 desc_array
[i
] = malloc(64);
2118 desc_array
[num_devices
] = NULL
;
2120 status
= FT_ListDevices(desc_array
, &num_devices
, FT_LIST_ALL
| openex_flags
);
2122 if (status
== FT_OK
) {
2123 LOG_ERROR("ListDevices: %" PRIu32
, (uint32_t)num_devices
);
2124 for (i
= 0; i
< num_devices
; i
++)
2125 LOG_ERROR("%" PRIu32
": \"%s\"", i
, desc_array
[i
]);
2128 for (i
= 0; i
< num_devices
; i
++)
2129 free(desc_array
[i
]);
2133 LOG_ERROR("ListDevices: NONE");
2134 return ERROR_JTAG_INIT_FAILED
;
2137 status
= FT_SetLatencyTimer(ftdih
, ft2232_latency
);
2138 if (status
!= FT_OK
) {
2139 LOG_ERROR("unable to set latency timer: %s",
2140 ftd2xx_status_string(status
));
2141 return ERROR_JTAG_INIT_FAILED
;
2144 status
= FT_GetLatencyTimer(ftdih
, &latency_timer
);
2145 if (status
!= FT_OK
) {
2146 /* ftd2xx 1.04 (linux) has a bug when calling FT_GetLatencyTimer
2147 * so ignore errors if using this driver version */
2150 status
= FT_GetDriverVersion(ftdih
, &dw_version
);
2151 LOG_ERROR("unable to get latency timer: %s",
2152 ftd2xx_status_string(status
));
2154 if ((status
== FT_OK
) && (dw_version
== 0x10004)) {
2155 LOG_ERROR("ftd2xx 1.04 detected - this has known issues " \
2156 "with FT_GetLatencyTimer, upgrade to a newer version");
2158 return ERROR_JTAG_INIT_FAILED
;
2160 LOG_DEBUG("current latency timer: %i", latency_timer
);
2162 status
= FT_SetTimeouts(ftdih
, 5000, 5000);
2163 if (status
!= FT_OK
) {
2164 LOG_ERROR("unable to set timeouts: %s",
2165 ftd2xx_status_string(status
));
2166 return ERROR_JTAG_INIT_FAILED
;
2169 status
= FT_SetBitMode(ftdih
, 0x0b, 2);
2170 if (status
!= FT_OK
) {
2171 LOG_ERROR("unable to enable bit i/o mode: %s",
2172 ftd2xx_status_string(status
));
2173 return ERROR_JTAG_INIT_FAILED
;
2176 status
= FT_GetDeviceInfo(ftdih
, &ftdi_device
, &deviceID
,
2177 SerialNumber
, Description
, NULL
);
2178 if (status
!= FT_OK
) {
2179 LOG_ERROR("unable to get FT_GetDeviceInfo: %s",
2180 ftd2xx_status_string(status
));
2181 return ERROR_JTAG_INIT_FAILED
;
2183 static const char *type_str
[] = {
2184 "BM", "AM", "100AX", "UNKNOWN", "2232C", "232R", "2232H", "4232H", "232H"
2186 unsigned no_of_known_types
= ARRAY_SIZE(type_str
) - 1;
2187 unsigned type_index
= ((unsigned)ftdi_device
<= no_of_known_types
)
2188 ? ftdi_device
: FT_DEVICE_UNKNOWN
;
2189 LOG_INFO("device: %" PRIu32
" \"%s\"", (uint32_t)ftdi_device
, type_str
[type_index
]);
2190 LOG_INFO("deviceID: %" PRIu32
, (uint32_t)deviceID
);
2191 LOG_INFO("SerialNumber: %s", SerialNumber
);
2192 LOG_INFO("Description: %s", Description
);
2198 static int ft2232_purge_ftd2xx(void)
2202 status
= FT_Purge(ftdih
, FT_PURGE_RX
| FT_PURGE_TX
);
2203 if (status
!= FT_OK
) {
2204 LOG_ERROR("error purging ftd2xx device: %s",
2205 ftd2xx_status_string(status
));
2206 return ERROR_JTAG_INIT_FAILED
;
2212 #endif /* BUILD_FT2232_FTD2XX == 1 */
2214 #if BUILD_FT2232_LIBFTDI == 1
2215 static int ft2232_init_libftdi(uint16_t vid
, uint16_t pid
, int more
, int *try_more
, int channel
)
2217 uint8_t latency_timer
;
2219 if (layout
== NULL
) {
2220 LOG_WARNING("No ft2232 layout specified'");
2221 return ERROR_JTAG_INIT_FAILED
;
2224 LOG_DEBUG("'ft2232' interface using libftdi with '%s' layout (%4.4x:%4.4x)",
2225 layout
->name
, vid
, pid
);
2227 if (ftdi_init(&ftdic
) < 0)
2228 return ERROR_JTAG_INIT_FAILED
;
2230 /* default to INTERFACE_A */
2231 if (channel
== INTERFACE_ANY
)
2232 channel
= INTERFACE_A
;
2233 if (ftdi_set_interface(&ftdic
, channel
) < 0) {
2234 LOG_ERROR("unable to select FT2232 channel A: %s", ftdic
.error_str
);
2235 return ERROR_JTAG_INIT_FAILED
;
2238 /* context, vendor id, product id */
2239 if (ftdi_usb_open_desc(&ftdic
, vid
, pid
, ft2232_device_desc
, ft2232_serial
) < 0) {
2241 LOG_WARNING("unable to open ftdi device (trying more): %s",
2244 LOG_ERROR("unable to open ftdi device: %s", ftdic
.error_str
);
2246 return ERROR_JTAG_INIT_FAILED
;
2249 /* There is already a reset in ftdi_usb_open_desc, this should be redundant */
2250 if (ftdi_usb_reset(&ftdic
) < 0) {
2251 LOG_ERROR("unable to reset ftdi device");
2252 return ERROR_JTAG_INIT_FAILED
;
2255 if (ftdi_set_latency_timer(&ftdic
, ft2232_latency
) < 0) {
2256 LOG_ERROR("unable to set latency timer");
2257 return ERROR_JTAG_INIT_FAILED
;
2260 if (ftdi_get_latency_timer(&ftdic
, &latency_timer
) < 0) {
2261 LOG_ERROR("unable to get latency timer");
2262 return ERROR_JTAG_INIT_FAILED
;
2264 LOG_DEBUG("current latency timer: %i", latency_timer
);
2266 ftdi_set_bitmode(&ftdic
, 0x0b, 2); /* ctx, JTAG I/O mask */
2268 ftdi_device
= ftdic
.type
;
2269 static const char *type_str
[] = {
2270 "AM", "BM", "2232C", "R", "2232H", "4232H", "232H", "Unknown"
2272 unsigned no_of_known_types
= ARRAY_SIZE(type_str
) - 1;
2273 unsigned type_index
= ((unsigned)ftdi_device
< no_of_known_types
)
2274 ? ftdi_device
: no_of_known_types
;
2275 LOG_DEBUG("FTDI chip type: %i \"%s\"", (int)ftdi_device
, type_str
[type_index
]);
2279 static int ft2232_purge_libftdi(void)
2281 if (ftdi_usb_purge_buffers(&ftdic
) < 0) {
2282 LOG_ERROR("ftdi_purge_buffers: %s", ftdic
.error_str
);
2283 return ERROR_JTAG_INIT_FAILED
;
2289 #endif /* BUILD_FT2232_LIBFTDI == 1 */
2291 static int ft2232_set_data_bits_low_byte(uint8_t value
, uint8_t direction
)
2294 uint32_t bytes_written
;
2296 buf
[0] = 0x80; /* command "set data bits low byte" */
2297 buf
[1] = value
; /* value */
2298 buf
[2] = direction
; /* direction */
2300 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2302 if (ft2232_write(buf
, sizeof(buf
), &bytes_written
) != ERROR_OK
) {
2303 LOG_ERROR("couldn't initialize data bits low byte");
2304 return ERROR_JTAG_INIT_FAILED
;
2310 static int ft2232_set_data_bits_high_byte(uint8_t value
, uint8_t direction
)
2313 uint32_t bytes_written
;
2315 buf
[0] = 0x82; /* command "set data bits high byte" */
2316 buf
[1] = value
; /* value */
2317 buf
[2] = direction
; /* direction */
2319 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2321 if (ft2232_write(buf
, sizeof(buf
), &bytes_written
) != ERROR_OK
) {
2322 LOG_ERROR("couldn't initialize data bits high byte");
2323 return ERROR_JTAG_INIT_FAILED
;
2329 static int ft2232_init(void)
2333 uint32_t bytes_written
;
2335 if (tap_get_tms_path_len(TAP_IRPAUSE
, TAP_IRPAUSE
) == 7)
2336 LOG_DEBUG("ft2232 interface using 7 step jtag state transitions");
2338 LOG_DEBUG("ft2232 interface using shortest path jtag state transitions");
2339 if (layout
== NULL
) {
2340 LOG_WARNING("No ft2232 layout specified'");
2341 return ERROR_JTAG_INIT_FAILED
;
2344 for (int i
= 0; 1; i
++) {
2346 * "more indicates that there are more IDs to try, so we should
2347 * not print an error for an ID mismatch (but for anything
2350 * try_more indicates that the error code returned indicates an
2351 * ID mismatch (and nothing else) and that we should proceeed
2352 * with the next ID pair.
2354 int more
= ft2232_vid
[i
+ 1] || ft2232_pid
[i
+ 1];
2357 #if BUILD_FT2232_FTD2XX == 1
2358 retval
= ft2232_init_ftd2xx(ft2232_vid
[i
], ft2232_pid
[i
],
2360 #elif BUILD_FT2232_LIBFTDI == 1
2361 retval
= ft2232_init_libftdi(ft2232_vid
[i
], ft2232_pid
[i
],
2362 more
, &try_more
, ft2232_channel
);
2366 if (!more
|| !try_more
)
2370 ft2232_buffer_size
= 0;
2371 ft2232_buffer
= malloc(FT2232_BUFFER_SIZE
);
2373 if (layout
->init() != ERROR_OK
)
2374 return ERROR_JTAG_INIT_FAILED
;
2376 if (ft2232_device_is_highspeed()) {
2377 #ifndef BUILD_FT2232_HIGHSPEED
2378 #if BUILD_FT2232_FTD2XX == 1
2380 "High Speed device found - You need a newer FTD2XX driver (version 2.04.16 or later)");
2381 #elif BUILD_FT2232_LIBFTDI == 1
2383 "High Speed device found - You need a newer libftdi version (0.16 or later)");
2386 /* make sure the legacy mode is disabled */
2387 if (ftx232h_clk_divide_by_5(false) != ERROR_OK
)
2388 return ERROR_JTAG_INIT_FAILED
;
2391 buf
[0] = 0x85; /* Disconnect TDI/DO to TDO/DI for Loopback */
2392 retval
= ft2232_write(buf
, 1, &bytes_written
);
2393 if (retval
!= ERROR_OK
) {
2394 LOG_ERROR("couldn't write to FT2232 to disable loopback");
2395 return ERROR_JTAG_INIT_FAILED
;
2398 #if BUILD_FT2232_FTD2XX == 1
2399 return ft2232_purge_ftd2xx();
2400 #elif BUILD_FT2232_LIBFTDI == 1
2401 return ft2232_purge_libftdi();
2407 /** Updates defaults for DBUS signals: the four JTAG signals
2408 * (TCK, TDI, TDO, TMS) and * the four GPIOL signals.
2410 static inline void ftx232_dbus_init(void)
2413 low_direction
= 0x0b;
2416 /** Initializes DBUS signals: the four JTAG signals (TCK, TDI, TDO, TMS),
2417 * the four GPIOL signals. Initialization covers value and direction,
2418 * as customized for each layout.
2420 static int ftx232_dbus_write(void)
2422 enum reset_types jtag_reset_config
= jtag_get_reset_config();
2423 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
) {
2424 low_direction
&= ~nTRSTnOE
; /* nTRST input */
2425 low_output
&= ~nTRST
; /* nTRST = 0 */
2427 low_direction
|= nTRSTnOE
; /* nTRST output */
2428 low_output
|= nTRST
; /* nTRST = 1 */
2431 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
) {
2432 low_direction
|= nSRSTnOE
; /* nSRST output */
2433 low_output
|= nSRST
; /* nSRST = 1 */
2435 low_direction
&= ~nSRSTnOE
; /* nSRST input */
2436 low_output
&= ~nSRST
; /* nSRST = 0 */
2439 /* initialize low byte for jtag */
2440 if (ft2232_set_data_bits_low_byte(low_output
, low_direction
) != ERROR_OK
) {
2441 LOG_ERROR("couldn't initialize FT2232 DBUS");
2442 return ERROR_JTAG_INIT_FAILED
;
2448 static int usbjtag_init(void)
2451 * NOTE: This is now _specific_ to the "usbjtag" layout.
2452 * Don't try cram any more layouts into this.
2461 return ftx232_dbus_write();
2464 static int lm3s811_jtag_init(void)
2468 /* There are multiple revisions of LM3S811 eval boards:
2469 * - Rev B (and older?) boards have no SWO trace support.
2470 * - Rev C boards add ADBUS_6 DBG_ENn and BDBUS_4 SWO_EN;
2471 * they should use the "luminary_icdi" layout instead.
2478 low_direction
= 0x8b;
2480 return ftx232_dbus_write();
2483 static int icdi_jtag_init(void)
2487 /* Most Luminary eval boards support SWO trace output,
2488 * and should use this "luminary_icdi" layout.
2490 * ADBUS 0..3 are used for JTAG as usual. GPIOs are used
2491 * to switch between JTAG and SWD, or switch the ft2232 UART
2492 * on the second MPSSE channel/interface (BDBUS)
2493 * between (i) the stellaris UART (on Luminary boards)
2494 * or (ii) SWO trace data (generic).
2496 * We come up in JTAG mode and may switch to SWD later (with
2497 * SWO/trace option if SWD is active).
2504 #define ICDI_JTAG_EN (1 << 7) /* ADBUS 7 (a.k.a. DBGMOD) */
2505 #define ICDI_DBG_ENn (1 << 6) /* ADBUS 6 */
2506 #define ICDI_SRST (1 << 5) /* ADBUS 5 */
2509 /* GPIOs on second channel/interface (UART) ... */
2510 #define ICDI_SWO_EN (1 << 4) /* BDBUS 4 */
2511 #define ICDI_TX_SWO (1 << 1) /* BDBUS 1 */
2512 #define ICDI_VCP_RX (1 << 0) /* BDBUS 0 (to stellaris UART) */
2517 nSRSTnOE
= ICDI_SRST
;
2519 low_direction
|= ICDI_JTAG_EN
| ICDI_DBG_ENn
;
2520 low_output
|= ICDI_JTAG_EN
;
2521 low_output
&= ~ICDI_DBG_ENn
;
2523 return ftx232_dbus_write();
2526 static int signalyzer_init(void)
2534 return ftx232_dbus_write();
2537 static int axm0432_jtag_init(void)
2540 low_direction
= 0x2b;
2542 /* initialize low byte for jtag */
2543 if (ft2232_set_data_bits_low_byte(low_output
, low_direction
) != ERROR_OK
) {
2544 LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
2545 return ERROR_JTAG_INIT_FAILED
;
2548 if (strcmp(layout
->name
, "axm0432_jtag") == 0) {
2550 nTRSTnOE
= 0x0; /* No output enable for TRST*/
2552 nSRSTnOE
= 0x0; /* No output enable for SRST*/
2554 LOG_ERROR("BUG: axm0432_jtag_init called for non axm0432 layout");
2559 high_direction
= 0x0c;
2561 enum reset_types jtag_reset_config
= jtag_get_reset_config();
2562 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
2563 LOG_ERROR("can't set nTRSTOE to push-pull on the Dicarlo jtag");
2565 high_output
|= nTRST
;
2567 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
2568 LOG_ERROR("can't set nSRST to push-pull on the Dicarlo jtag");
2570 high_output
|= nSRST
;
2572 /* initialize high byte for jtag */
2573 if (ft2232_set_data_bits_high_byte(high_output
, high_direction
) != ERROR_OK
) {
2574 LOG_ERROR("couldn't initialize FT2232 with 'Dicarlo' layout");
2575 return ERROR_JTAG_INIT_FAILED
;
2581 static int redbee_init(void)
2584 low_direction
= 0x2b;
2586 /* initialize low byte for jtag */
2587 if (ft2232_set_data_bits_low_byte(low_output
, low_direction
) != ERROR_OK
) {
2588 LOG_ERROR("couldn't initialize FT2232 with 'redbee' layout");
2589 return ERROR_JTAG_INIT_FAILED
;
2593 nTRSTnOE
= 0x0; /* No output enable for TRST*/
2595 nSRSTnOE
= 0x0; /* No output enable for SRST*/
2598 high_direction
= 0x0c;
2600 enum reset_types jtag_reset_config
= jtag_get_reset_config();
2601 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
2602 LOG_ERROR("can't set nTRSTOE to push-pull on redbee");
2604 high_output
|= nTRST
;
2606 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
2607 LOG_ERROR("can't set nSRST to push-pull on redbee");
2609 high_output
|= nSRST
;
2611 /* initialize high byte for jtag */
2612 if (ft2232_set_data_bits_high_byte(high_output
, high_direction
) != ERROR_OK
) {
2613 LOG_ERROR("couldn't initialize FT2232 with 'redbee' layout");
2614 return ERROR_JTAG_INIT_FAILED
;
2620 static int jtagkey_init(void)
2623 low_direction
= 0x1b;
2625 /* initialize low byte for jtag */
2626 if (ft2232_set_data_bits_low_byte(low_output
, low_direction
) != ERROR_OK
) {
2627 LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
2628 return ERROR_JTAG_INIT_FAILED
;
2631 if (strcmp(layout
->name
, "jtagkey") == 0) {
2636 } else if ((strcmp(layout
->name
, "jtagkey_prototype_v1") == 0)
2637 || (strcmp(layout
->name
, "oocdlink") == 0)) {
2643 LOG_ERROR("BUG: jtagkey_init called for non jtagkey layout");
2648 high_direction
= 0x0f;
2650 enum reset_types jtag_reset_config
= jtag_get_reset_config();
2651 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
) {
2652 high_output
|= nTRSTnOE
;
2653 high_output
&= ~nTRST
;
2655 high_output
&= ~nTRSTnOE
;
2656 high_output
|= nTRST
;
2659 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
) {
2660 high_output
&= ~nSRSTnOE
;
2661 high_output
|= nSRST
;
2663 high_output
|= nSRSTnOE
;
2664 high_output
&= ~nSRST
;
2667 /* initialize high byte for jtag */
2668 if (ft2232_set_data_bits_high_byte(high_output
, high_direction
) != ERROR_OK
) {
2669 LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
2670 return ERROR_JTAG_INIT_FAILED
;
2676 static int olimex_jtag_init(void)
2679 low_direction
= 0x1b;
2681 /* initialize low byte for jtag */
2682 if (ft2232_set_data_bits_low_byte(low_output
, low_direction
) != ERROR_OK
) {
2683 LOG_ERROR("couldn't initialize FT2232 with 'Olimex' layout");
2684 return ERROR_JTAG_INIT_FAILED
;
2690 nSRSTnOE
= 0x00;/* no output enable for nSRST */
2693 high_direction
= 0x0f;
2695 enum reset_types jtag_reset_config
= jtag_get_reset_config();
2696 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
) {
2697 high_output
|= nTRSTnOE
;
2698 high_output
&= ~nTRST
;
2700 high_output
&= ~nTRSTnOE
;
2701 high_output
|= nTRST
;
2704 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
2705 LOG_ERROR("can't set nSRST to push-pull on the Olimex ARM-USB-OCD");
2707 high_output
&= ~nSRST
;
2709 /* turn red LED on */
2710 high_output
|= 0x08;
2712 /* initialize high byte for jtag */
2713 if (ft2232_set_data_bits_high_byte(high_output
, high_direction
) != ERROR_OK
) {
2714 LOG_ERROR("couldn't initialize FT2232 with 'Olimex' layout");
2715 return ERROR_JTAG_INIT_FAILED
;
2721 static int flyswatter_init(int rev
)
2724 low_direction
= 0x7b;
2726 if ((rev
< 0) || (rev
> 3)) {
2727 LOG_ERROR("bogus 'flyswatter' revision supplied (%i)", rev
);
2728 return ERROR_JTAG_INIT_FAILED
;
2732 low_direction
|= 1 << 7;
2734 /* initialize low byte for jtag */
2735 if (ft2232_set_data_bits_low_byte(low_output
, low_direction
) != ERROR_OK
) {
2736 LOG_ERROR("couldn't initialize FT2232 with 'flyswatter' layout");
2737 return ERROR_JTAG_INIT_FAILED
;
2741 nTRSTnOE
= 0x0; /* not output enable for nTRST */
2743 nSRSTnOE
= 0x00; /* no output enable for nSRST */
2748 high_direction
= 0x0c;
2750 high_direction
= 0x01;
2752 /* turn red LED3 on, LED2 off */
2753 high_output
|= 0x08;
2755 /* initialize high byte for jtag */
2756 if (ft2232_set_data_bits_high_byte(high_output
, high_direction
) != ERROR_OK
) {
2757 LOG_ERROR("couldn't initialize FT2232 with 'flyswatter' layout");
2758 return ERROR_JTAG_INIT_FAILED
;
2764 static int flyswatter1_init(void)
2766 return flyswatter_init(1);
2769 static int flyswatter2_init(void)
2771 return flyswatter_init(2);
2774 static int minimodule_init(void)
2776 low_output
= 0x18; /* check if srst should be 1 or 0 initially. (0x08) (flyswatter was
2778 low_direction
= 0xfb; /* 0xfb; */
2780 /* initialize low byte for jtag */
2781 if (ft2232_set_data_bits_low_byte(low_output
, low_direction
) != ERROR_OK
) {
2782 LOG_ERROR("couldn't initialize FT2232 with 'minimodule' layout");
2783 return ERROR_JTAG_INIT_FAILED
;
2790 high_direction
= 0x05;
2792 /* turn red LED3 on, LED2 off */
2793 /* high_output |= 0x08; */
2795 /* initialize high byte for jtag */
2796 if (ft2232_set_data_bits_high_byte(high_output
, high_direction
) != ERROR_OK
) {
2797 LOG_ERROR("couldn't initialize FT2232 with 'minimodule' layout");
2798 return ERROR_JTAG_INIT_FAILED
;
2804 static int turtle_init(void)
2807 low_direction
= 0x5b;
2809 /* initialize low byte for jtag */
2810 if (ft2232_set_data_bits_low_byte(low_output
, low_direction
) != ERROR_OK
) {
2811 LOG_ERROR("couldn't initialize FT2232 with 'turtelizer2' layout");
2812 return ERROR_JTAG_INIT_FAILED
;
2818 high_direction
= 0x0C;
2820 /* initialize high byte for jtag */
2821 if (ft2232_set_data_bits_high_byte(high_output
, high_direction
) != ERROR_OK
) {
2822 LOG_ERROR("couldn't initialize FT2232 with 'turtelizer2' layout");
2823 return ERROR_JTAG_INIT_FAILED
;
2829 static int comstick_init(void)
2832 low_direction
= 0x0b;
2834 /* initialize low byte for jtag */
2835 if (ft2232_set_data_bits_low_byte(low_output
, low_direction
) != ERROR_OK
) {
2836 LOG_ERROR("couldn't initialize FT2232 with 'comstick' layout");
2837 return ERROR_JTAG_INIT_FAILED
;
2841 nTRSTnOE
= 0x00; /* no output enable for nTRST */
2843 nSRSTnOE
= 0x00; /* no output enable for nSRST */
2846 high_direction
= 0x03;
2848 /* initialize high byte for jtag */
2849 if (ft2232_set_data_bits_high_byte(high_output
, high_direction
) != ERROR_OK
) {
2850 LOG_ERROR("couldn't initialize FT2232 with 'comstick' layout");
2851 return ERROR_JTAG_INIT_FAILED
;
2857 static int stm32stick_init(void)
2860 low_direction
= 0x8b;
2862 /* initialize low byte for jtag */
2863 if (ft2232_set_data_bits_low_byte(low_output
, low_direction
) != ERROR_OK
) {
2864 LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout");
2865 return ERROR_JTAG_INIT_FAILED
;
2869 nTRSTnOE
= 0x00; /* no output enable for nTRST */
2871 nSRSTnOE
= 0x00; /* no output enable for nSRST */
2874 high_direction
= 0x03;
2876 /* initialize high byte for jtag */
2877 if (ft2232_set_data_bits_high_byte(high_output
, high_direction
) != ERROR_OK
) {
2878 LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout");
2879 return ERROR_JTAG_INIT_FAILED
;
2885 static int sheevaplug_init(void)
2888 low_direction
= 0x1b;
2890 /* initialize low byte for jtag */
2891 if (ft2232_set_data_bits_low_byte(low_output
, low_direction
) != ERROR_OK
) {
2892 LOG_ERROR("couldn't initialize FT2232 with 'sheevaplug' layout");
2893 return ERROR_JTAG_INIT_FAILED
;
2902 high_direction
= 0x0f;
2904 /* nTRST is always push-pull */
2905 high_output
&= ~nTRSTnOE
;
2906 high_output
|= nTRST
;
2908 /* nSRST is always open-drain */
2909 high_output
|= nSRSTnOE
;
2910 high_output
&= ~nSRST
;
2912 /* initialize high byte for jtag */
2913 if (ft2232_set_data_bits_high_byte(high_output
, high_direction
) != ERROR_OK
) {
2914 LOG_ERROR("couldn't initialize FT2232 with 'sheevaplug' layout");
2915 return ERROR_JTAG_INIT_FAILED
;
2921 static int cortino_jtag_init(void)
2924 low_direction
= 0x1b;
2926 /* initialize low byte for jtag */
2927 if (ft2232_set_data_bits_low_byte(low_output
, low_direction
) != ERROR_OK
) {
2928 LOG_ERROR("couldn't initialize FT2232 with 'cortino' layout");
2929 return ERROR_JTAG_INIT_FAILED
;
2933 nTRSTnOE
= 0x00; /* no output enable for nTRST */
2935 nSRSTnOE
= 0x00; /* no output enable for nSRST */
2938 high_direction
= 0x03;
2940 /* initialize high byte for jtag */
2941 if (ft2232_set_data_bits_high_byte(high_output
, high_direction
) != ERROR_OK
) {
2942 LOG_ERROR("couldn't initialize FT2232 with 'cortino' layout");
2943 return ERROR_JTAG_INIT_FAILED
;
2949 static int lisa_l_init(void)
2959 high_direction
= 0x18;
2961 /* initialize high byte for jtag */
2962 if (ft2232_set_data_bits_high_byte(high_output
, high_direction
) != ERROR_OK
) {
2963 LOG_ERROR("couldn't initialize FT2232 with 'lisa_l' layout");
2964 return ERROR_JTAG_INIT_FAILED
;
2967 return ftx232_dbus_write();
2970 static int flossjtag_init(void)
2980 high_direction
= 0x18;
2982 /* initialize high byte for jtag */
2983 if (ft2232_set_data_bits_high_byte(high_output
, high_direction
) != ERROR_OK
) {
2984 LOG_ERROR("couldn't initialize FT2232 with 'Floss-JTAG' layout");
2985 return ERROR_JTAG_INIT_FAILED
;
2988 return ftx232_dbus_write();
2992 * The reference schematic from TI for the XDS100v2 has a CPLD on which opens
2993 * the door for a number of different configurations
2995 * Known Implementations:
2996 * http://processors.wiki.ti.com/images/9/93/TMS570LS20216_USB_STICK_Schematic.pdf
2998 * http://processors.wiki.ti.com/index.php/XDS100 (rev2)
2999 * * CLPD logic: Rising edge to enable outputs (XDS100_PWR_RST)
3000 * * ACBUS3 to transition 0->1 (OE rising edge)
3001 * * CPLD logic: Put the EMU0/1 pins in Hi-Z:
3002 * * ADBUS5/GPIOL1 = EMU_EN = 1
3003 * * ADBUS6/GPIOL2 = EMU0 = 0
3004 * * ACBUS4/SPARE0 = EMU1 = 0
3005 * * CPLD logic: Disable loopback
3006 * * ACBUS6/SPARE2 = LOOPBACK = 0
3008 #define XDS100_nEMU_EN (1<<5)
3009 #define XDS100_nEMU0 (1<<6)
3011 #define XDS100_PWR_RST (1<<3)
3012 #define XDS100_nEMU1 (1<<4)
3013 #define XDS100_LOOPBACK (1<<6)
3014 static int xds100v2_init(void)
3016 /* These are in the lower byte */
3020 /* These aren't actually used on 14 pin connectors
3021 * These are in the upper byte */
3025 low_output
= 0x08 | nTRST
| XDS100_nEMU_EN
;
3026 low_direction
= 0x0b | nTRSTnOE
| XDS100_nEMU_EN
| XDS100_nEMU0
;
3028 if (ft2232_set_data_bits_low_byte(low_output
, low_direction
) != ERROR_OK
) {
3029 LOG_ERROR("couldn't initialize FT2232 with 'xds100v2' layout");
3030 return ERROR_JTAG_INIT_FAILED
;
3034 high_direction
= nSRSTnOE
| XDS100_LOOPBACK
| XDS100_PWR_RST
| XDS100_nEMU1
;
3036 /* initialize high byte for jtag */
3037 if (ft2232_set_data_bits_high_byte(high_output
, high_direction
) != ERROR_OK
) {
3038 LOG_ERROR("couldn't put CPLD in to reset with 'xds100v2' layout");
3039 return ERROR_JTAG_INIT_FAILED
;
3042 high_output
|= XDS100_PWR_RST
;
3044 /* initialize high byte for jtag */
3045 if (ft2232_set_data_bits_high_byte(high_output
, high_direction
) != ERROR_OK
) {
3046 LOG_ERROR("couldn't bring CPLD out of reset with 'xds100v2' layout");
3047 return ERROR_JTAG_INIT_FAILED
;
3053 static void olimex_jtag_blink(void)
3055 /* Olimex ARM-USB-OCD has a LED connected to ACBUS3
3056 * ACBUS3 is bit 3 of the GPIOH port
3058 high_output
^= 0x08;
3061 buffer_write(high_output
);
3062 buffer_write(high_direction
);
3065 static void flyswatter_jtag_blink(unsigned char led
)
3068 buffer_write(high_output
^ led
);
3069 buffer_write(high_direction
);
3072 static void flyswatter1_jtag_blink(void)
3075 * Flyswatter has two LEDs connected to ACBUS2 and ACBUS3
3077 flyswatter_jtag_blink(0xc);
3080 static void flyswatter2_jtag_blink(void)
3083 * Flyswatter2 only has one LED connected to ACBUS2
3085 flyswatter_jtag_blink(0x4);
3088 static void turtle_jtag_blink(void)
3091 * Turtelizer2 has two LEDs connected to ACBUS2 and ACBUS3
3093 if (high_output
& 0x08)
3099 buffer_write(high_output
);
3100 buffer_write(high_direction
);
3103 static void lisa_l_blink(void)
3106 * Lisa/L has two LEDs connected to BCBUS3 and BCBUS4
3108 if (high_output
& 0x10)
3114 buffer_write(high_output
);
3115 buffer_write(high_direction
);
3118 static void flossjtag_blink(void)
3121 * Floss-JTAG has two LEDs connected to ACBUS3 and ACBUS4
3123 if (high_output
& 0x10)
3129 buffer_write(high_output
);
3130 buffer_write(high_direction
);
3133 static int ft2232_quit(void)
3135 #if BUILD_FT2232_FTD2XX == 1
3138 status
= FT_Close(ftdih
);
3139 #elif BUILD_FT2232_LIBFTDI == 1
3140 ftdi_usb_close(&ftdic
);
3142 ftdi_deinit(&ftdic
);
3145 free(ft2232_buffer
);
3146 ft2232_buffer
= NULL
;
3151 COMMAND_HANDLER(ft2232_handle_device_desc_command
)
3155 if (CMD_ARGC
== 1) {
3156 ft2232_device_desc
= strdup(CMD_ARGV
[0]);
3157 cp
= strchr(ft2232_device_desc
, 0);
3158 /* under Win32, the FTD2XX driver appends an "A" to the end
3159 * of the description, this examines the given desc
3160 * and creates the 'missing' _A or non_A variable. */
3161 if ((cp
[-1] == 'A') && (cp
[-2] == ' ')) {
3162 /* it was, so make this the "A" version. */
3163 ft2232_device_desc_A
= ft2232_device_desc
;
3164 /* and *CREATE* the non-A version. */
3165 strcpy(buf
, ft2232_device_desc
);
3166 cp
= strchr(buf
, 0);
3168 ft2232_device_desc
= strdup(buf
);
3170 /* <space > A not defined
3172 sprintf(buf
, "%s A", ft2232_device_desc
);
3173 ft2232_device_desc_A
= strdup(buf
);
3176 LOG_ERROR("expected exactly one argument to ft2232_device_desc <description>");
3181 COMMAND_HANDLER(ft2232_handle_serial_command
)
3184 ft2232_serial
= strdup(CMD_ARGV
[0]);
3186 return ERROR_COMMAND_SYNTAX_ERROR
;
3191 COMMAND_HANDLER(ft2232_handle_layout_command
)
3194 return ERROR_COMMAND_SYNTAX_ERROR
;
3197 LOG_ERROR("already specified ft2232_layout %s",
3199 return (strcmp(layout
->name
, CMD_ARGV
[0]) != 0)
3204 for (const struct ft2232_layout
*l
= ft2232_layouts
; l
->name
; l
++) {
3205 if (strcmp(l
->name
, CMD_ARGV
[0]) == 0) {
3207 ft2232_channel
= l
->channel
;
3212 LOG_ERROR("No FT2232 layout '%s' found", CMD_ARGV
[0]);
3216 COMMAND_HANDLER(ft2232_handle_vid_pid_command
)
3218 if (CMD_ARGC
> MAX_USB_IDS
* 2) {
3219 LOG_WARNING("ignoring extra IDs in ft2232_vid_pid "
3220 "(maximum is %d pairs)", MAX_USB_IDS
);
3221 CMD_ARGC
= MAX_USB_IDS
* 2;
3223 if (CMD_ARGC
< 2 || (CMD_ARGC
& 1)) {
3224 LOG_WARNING("incomplete ft2232_vid_pid configuration directive");
3226 return ERROR_COMMAND_SYNTAX_ERROR
;
3227 /* remove the incomplete trailing id */
3232 for (i
= 0; i
< CMD_ARGC
; i
+= 2) {
3233 COMMAND_PARSE_NUMBER(u16
, CMD_ARGV
[i
], ft2232_vid
[i
>> 1]);
3234 COMMAND_PARSE_NUMBER(u16
, CMD_ARGV
[i
+ 1], ft2232_pid
[i
>> 1]);
3238 * Explicitly terminate, in case there are multiples instances of
3241 ft2232_vid
[i
>> 1] = ft2232_pid
[i
>> 1] = 0;
3246 COMMAND_HANDLER(ft2232_handle_latency_command
)
3249 ft2232_latency
= atoi(CMD_ARGV
[0]);
3251 return ERROR_COMMAND_SYNTAX_ERROR
;
3256 COMMAND_HANDLER(ft2232_handle_channel_command
)
3258 if (CMD_ARGC
== 1) {
3259 ft2232_channel
= atoi(CMD_ARGV
[0]);
3260 if (ft2232_channel
< 0 || ft2232_channel
> 4)
3261 LOG_ERROR("ft2232_channel must be in the 0 to 4 range");
3263 LOG_ERROR("expected exactly one argument to ft2232_channel <ch>");
3268 static int ft2232_stableclocks(int num_cycles
, struct jtag_command
*cmd
)
3272 /* 7 bits of either ones or zeros. */
3273 uint8_t tms
= (tap_get_state() == TAP_RESET
? 0x7F : 0x00);
3275 while (num_cycles
> 0) {
3276 /* the command 0x4b, "Clock Data to TMS/CS Pin (no Read)" handles
3277 * at most 7 bits per invocation. Here we invoke it potentially
3280 int bitcount_per_command
= (num_cycles
> 7) ? 7 : num_cycles
;
3282 if (ft2232_buffer_size
+ 3 >= FT2232_BUFFER_SIZE
) {
3283 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
3284 retval
= ERROR_JTAG_QUEUE_FAILED
;
3289 /* there are no state transitions in this code, so omit state tracking */
3291 /* command "Clock Data to TMS/CS Pin (no Read)" */
3295 buffer_write(bitcount_per_command
- 1);
3297 /* TMS data bits are either all zeros or ones to stay in the current stable state */
3302 num_cycles
-= bitcount_per_command
;
3308 /* ---------------------------------------------------------------------
3309 * Support for IceBear JTAG adapter from Section5:
3310 * http://section5.ch/icebear
3312 * Author: Sten, debian@sansys-electronic.com
3315 /* Icebear pin layout
3317 * ADBUS5 (nEMU) nSRST | 2 1| GND (10k->VCC)
3318 * GND GND | 4 3| n.c.
3319 * ADBUS3 TMS | 6 5| ADBUS6 VCC
3320 * ADBUS0 TCK | 8 7| ADBUS7 (GND)
3321 * ADBUS4 nTRST |10 9| ACBUS0 (GND)
3322 * ADBUS1 TDI |12 11| ACBUS1 (GND)
3323 * ADBUS2 TDO |14 13| GND GND
3325 * ADBUS0 O L TCK ACBUS0 GND
3326 * ADBUS1 O L TDI ACBUS1 GND
3327 * ADBUS2 I TDO ACBUS2 n.c.
3328 * ADBUS3 O H TMS ACBUS3 n.c.
3334 static int icebear_jtag_init(void)
3336 low_direction
= 0x0b; /* output: TCK TDI TMS; input: TDO */
3337 low_output
= 0x08; /* high: TMS; low: TCK TDI */
3341 enum reset_types jtag_reset_config
= jtag_get_reset_config();
3342 if ((jtag_reset_config
& RESET_TRST_OPEN_DRAIN
) != 0)
3343 low_direction
&= ~nTRST
; /* nTRST high impedance */
3345 low_direction
|= nTRST
;
3346 low_output
|= nTRST
;
3349 low_direction
|= nSRST
;
3350 low_output
|= nSRST
;
3352 /* initialize low byte for jtag */
3353 if (ft2232_set_data_bits_low_byte(low_output
, low_direction
) != ERROR_OK
) {
3354 LOG_ERROR("couldn't initialize FT2232 with 'IceBear' layout (low)");
3355 return ERROR_JTAG_INIT_FAILED
;
3359 high_direction
= 0x00;
3361 /* initialize high byte for jtag */
3362 if (ft2232_set_data_bits_high_byte(high_output
, high_direction
) != ERROR_OK
) {
3363 LOG_ERROR("couldn't initialize FT2232 with 'IceBear' layout (high)");
3364 return ERROR_JTAG_INIT_FAILED
;
3370 static void icebear_jtag_reset(int trst
, int srst
)
3373 low_direction
|= nTRST
;
3374 low_output
&= ~nTRST
;
3375 } else if (trst
== 0) {
3376 enum reset_types jtag_reset_config
= jtag_get_reset_config();
3377 if ((jtag_reset_config
& RESET_TRST_OPEN_DRAIN
) != 0)
3378 low_direction
&= ~nTRST
;
3380 low_output
|= nTRST
;
3384 low_output
&= ~nSRST
;
3386 low_output
|= nSRST
;
3388 /* command "set data bits low byte" */
3390 buffer_write(low_output
);
3391 buffer_write(low_direction
);
3393 LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x",
3400 /* ---------------------------------------------------------------------
3401 * Support for Signalyzer H2 and Signalyzer H4
3402 * JTAG adapter from Xverve Technologies Inc.
3403 * http://www.signalyzer.com or http://www.xverve.com
3405 * Author: Oleg Seiljus, oleg@signalyzer.com
3407 static unsigned char signalyzer_h_side
;
3408 static unsigned int signalyzer_h_adapter_type
;
3410 static int signalyzer_h_ctrl_write(int address
, unsigned short value
);
3412 #if BUILD_FT2232_FTD2XX == 1
3413 static int signalyzer_h_ctrl_read(int address
, unsigned short *value
);
3416 #define SIGNALYZER_COMMAND_ADDR 128
3417 #define SIGNALYZER_DATA_BUFFER_ADDR 129
3419 #define SIGNALYZER_COMMAND_VERSION 0x41
3420 #define SIGNALYZER_COMMAND_RESET 0x42
3421 #define SIGNALYZER_COMMAND_POWERCONTROL_GET 0x50
3422 #define SIGNALYZER_COMMAND_POWERCONTROL_SET 0x51
3423 #define SIGNALYZER_COMMAND_PWM_SET 0x52
3424 #define SIGNALYZER_COMMAND_LED_SET 0x53
3425 #define SIGNALYZER_COMMAND_ADC 0x54
3426 #define SIGNALYZER_COMMAND_GPIO_STATE 0x55
3427 #define SIGNALYZER_COMMAND_GPIO_MODE 0x56
3428 #define SIGNALYZER_COMMAND_GPIO_PORT 0x57
3429 #define SIGNALYZER_COMMAND_I2C 0x58
3431 #define SIGNALYZER_CHAN_A 1
3432 #define SIGNALYZER_CHAN_B 2
3433 /* LEDS use channel C */
3434 #define SIGNALYZER_CHAN_C 4
3436 #define SIGNALYZER_LED_GREEN 1
3437 #define SIGNALYZER_LED_RED 2
3439 #define SIGNALYZER_MODULE_TYPE_EM_LT16_A 0x0301
3440 #define SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG 0x0302
3441 #define SIGNALYZER_MODULE_TYPE_EM_JTAG 0x0303
3442 #define SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG_P 0x0304
3443 #define SIGNALYZER_MODULE_TYPE_EM_JTAG_P 0x0305
3446 static int signalyzer_h_ctrl_write(int address
, unsigned short value
)
3448 #if BUILD_FT2232_FTD2XX == 1
3449 return FT_WriteEE(ftdih
, address
, value
);
3450 #elif BUILD_FT2232_LIBFTDI == 1
3455 #if BUILD_FT2232_FTD2XX == 1
3456 static int signalyzer_h_ctrl_read(int address
, unsigned short *value
)
3458 return FT_ReadEE(ftdih
, address
, value
);
3462 static int signalyzer_h_led_set(unsigned char channel
, unsigned char led
,
3463 int on_time_ms
, int off_time_ms
, unsigned char cycles
)
3465 unsigned char on_time
;
3466 unsigned char off_time
;
3468 if (on_time_ms
< 0xFFFF)
3469 on_time
= (unsigned char)(on_time_ms
/ 62);
3473 off_time
= (unsigned char)(off_time_ms
/ 62);
3475 #if BUILD_FT2232_FTD2XX == 1
3478 status
= signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR
,
3479 ((uint32_t)(channel
<< 8) | led
));
3480 if (status
!= FT_OK
) {
3481 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3482 ftd2xx_status_string(status
));
3483 return ERROR_JTAG_DEVICE_ERROR
;
3486 status
= signalyzer_h_ctrl_write((SIGNALYZER_DATA_BUFFER_ADDR
+ 1),
3487 ((uint32_t)(on_time
<< 8) | off_time
));
3488 if (status
!= FT_OK
) {
3489 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3490 ftd2xx_status_string(status
));
3491 return ERROR_JTAG_DEVICE_ERROR
;
3494 status
= signalyzer_h_ctrl_write((SIGNALYZER_DATA_BUFFER_ADDR
+ 2),
3495 ((uint32_t)cycles
));
3496 if (status
!= FT_OK
) {
3497 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3498 ftd2xx_status_string(status
));
3499 return ERROR_JTAG_DEVICE_ERROR
;
3502 status
= signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR
,
3503 SIGNALYZER_COMMAND_LED_SET
);
3504 if (status
!= FT_OK
) {
3505 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3506 ftd2xx_status_string(status
));
3507 return ERROR_JTAG_DEVICE_ERROR
;
3511 #elif BUILD_FT2232_LIBFTDI == 1
3514 retval
= signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR
,
3515 ((uint32_t)(channel
<< 8) | led
));
3517 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3518 ftdi_get_error_string(&ftdic
));
3519 return ERROR_JTAG_DEVICE_ERROR
;
3522 retval
= signalyzer_h_ctrl_write((SIGNALYZER_DATA_BUFFER_ADDR
+ 1),
3523 ((uint32_t)(on_time
<< 8) | off_time
));
3525 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3526 ftdi_get_error_string(&ftdic
));
3527 return ERROR_JTAG_DEVICE_ERROR
;
3530 retval
= signalyzer_h_ctrl_write((SIGNALYZER_DATA_BUFFER_ADDR
+ 2),
3533 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3534 ftdi_get_error_string(&ftdic
));
3535 return ERROR_JTAG_DEVICE_ERROR
;
3538 retval
= signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR
,
3539 SIGNALYZER_COMMAND_LED_SET
);
3541 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3542 ftdi_get_error_string(&ftdic
));
3543 return ERROR_JTAG_DEVICE_ERROR
;
3550 static int signalyzer_h_init(void)
3552 #if BUILD_FT2232_FTD2XX == 1
3559 uint16_t read_buf
[12] = { 0 };
3561 /* turn on center green led */
3562 signalyzer_h_led_set(SIGNALYZER_CHAN_C
, SIGNALYZER_LED_GREEN
,
3563 0xFFFF, 0x00, 0x00);
3565 /* determine what channel config wants to open
3566 * TODO: change me... current implementation is made to work
3567 * with openocd description parsing.
3569 end_of_desc
= strrchr(ft2232_device_desc
, 0x00);
3572 signalyzer_h_side
= *(end_of_desc
- 1);
3573 if (signalyzer_h_side
== 'B')
3574 signalyzer_h_side
= SIGNALYZER_CHAN_B
;
3576 signalyzer_h_side
= SIGNALYZER_CHAN_A
;
3578 LOG_ERROR("No Channel was specified");
3582 signalyzer_h_led_set(signalyzer_h_side
, SIGNALYZER_LED_GREEN
,
3585 #if BUILD_FT2232_FTD2XX == 1
3586 /* read signalyzer versionining information */
3587 status
= signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR
,
3588 SIGNALYZER_COMMAND_VERSION
);
3589 if (status
!= FT_OK
) {
3590 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3591 ftd2xx_status_string(status
));
3592 return ERROR_JTAG_DEVICE_ERROR
;
3595 for (i
= 0; i
< 10; i
++) {
3596 status
= signalyzer_h_ctrl_read((SIGNALYZER_DATA_BUFFER_ADDR
+ i
),
3598 if (status
!= FT_OK
) {
3599 LOG_ERROR("signalyzer_h_ctrl_read returned: %s",
3600 ftd2xx_status_string(status
));
3601 return ERROR_JTAG_DEVICE_ERROR
;
3605 LOG_INFO("Signalyzer: ID info: { %.4x %.4x %.4x %.4x %.4x %.4x %.4x }",
3606 read_buf
[0], read_buf
[1], read_buf
[2], read_buf
[3],
3607 read_buf
[4], read_buf
[5], read_buf
[6]);
3609 /* set gpio register */
3610 status
= signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR
,
3611 (uint32_t)(signalyzer_h_side
<< 8));
3612 if (status
!= FT_OK
) {
3613 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3614 ftd2xx_status_string(status
));
3615 return ERROR_JTAG_DEVICE_ERROR
;
3618 status
= signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR
+ 1, 0x0404);
3619 if (status
!= FT_OK
) {
3620 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3621 ftd2xx_status_string(status
));
3622 return ERROR_JTAG_DEVICE_ERROR
;
3625 status
= signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR
,
3626 SIGNALYZER_COMMAND_GPIO_STATE
);
3627 if (status
!= FT_OK
) {
3628 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3629 ftd2xx_status_string(status
));
3630 return ERROR_JTAG_DEVICE_ERROR
;
3633 /* read adapter type information */
3634 status
= signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR
,
3635 ((uint32_t)(signalyzer_h_side
<< 8) | 0x01));
3636 if (status
!= FT_OK
) {
3637 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3638 ftd2xx_status_string(status
));
3639 return ERROR_JTAG_DEVICE_ERROR
;
3642 status
= signalyzer_h_ctrl_write(
3643 (SIGNALYZER_DATA_BUFFER_ADDR
+ 1), 0xA000);
3644 if (status
!= FT_OK
) {
3645 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3646 ftd2xx_status_string(status
));
3647 return ERROR_JTAG_DEVICE_ERROR
;
3650 status
= signalyzer_h_ctrl_write(
3651 (SIGNALYZER_DATA_BUFFER_ADDR
+ 2), 0x0008);
3652 if (status
!= FT_OK
) {
3653 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3654 ftd2xx_status_string(status
));
3655 return ERROR_JTAG_DEVICE_ERROR
;
3658 status
= signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR
,
3659 SIGNALYZER_COMMAND_I2C
);
3660 if (status
!= FT_OK
) {
3661 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3662 ftd2xx_status_string(status
));
3663 return ERROR_JTAG_DEVICE_ERROR
;
3668 status
= signalyzer_h_ctrl_read(SIGNALYZER_COMMAND_ADDR
, &read_buf
[0]);
3669 if (status
!= FT_OK
) {
3670 LOG_ERROR("signalyzer_h_ctrl_read returned: %s",
3671 ftd2xx_status_string(status
));
3672 return ERROR_JTAG_DEVICE_ERROR
;
3675 if (read_buf
[0] != 0x0498)
3676 signalyzer_h_adapter_type
= 0x0000;
3678 for (i
= 0; i
< 4; i
++) {
3679 status
= signalyzer_h_ctrl_read((SIGNALYZER_DATA_BUFFER_ADDR
+ i
), &read_buf
[i
]);
3680 if (status
!= FT_OK
) {
3681 LOG_ERROR("signalyzer_h_ctrl_read returned: %s",
3682 ftd2xx_status_string(status
));
3683 return ERROR_JTAG_DEVICE_ERROR
;
3687 signalyzer_h_adapter_type
= read_buf
[0];
3690 #elif BUILD_FT2232_LIBFTDI == 1
3691 /* currently libftdi does not allow reading individual eeprom
3692 * locations, therefore adapter type cannot be detected.
3693 * override with most common type
3695 signalyzer_h_adapter_type
= SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG
;
3698 enum reset_types jtag_reset_config
= jtag_get_reset_config();
3700 /* ADAPTOR: EM_LT16_A */
3701 if (signalyzer_h_adapter_type
== SIGNALYZER_MODULE_TYPE_EM_LT16_A
) {
3702 LOG_INFO("Signalyzer: EM-LT (16-channel level translator) "
3703 "detected. (HW: %2x).", (read_buf
[1] >> 8));
3711 low_direction
= 0x1b;
3714 high_direction
= 0x0;
3716 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
) {
3717 low_direction
&= ~nTRSTnOE
; /* nTRST input */
3718 low_output
&= ~nTRST
; /* nTRST = 0 */
3720 low_direction
|= nTRSTnOE
; /* nTRST output */
3721 low_output
|= nTRST
; /* nTRST = 1 */
3724 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
) {
3725 low_direction
|= nSRSTnOE
; /* nSRST output */
3726 low_output
|= nSRST
; /* nSRST = 1 */
3728 low_direction
&= ~nSRSTnOE
; /* nSRST input */
3729 low_output
&= ~nSRST
; /* nSRST = 0 */
3732 #if BUILD_FT2232_FTD2XX == 1
3733 /* enable power to the module */
3734 status
= signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR
,
3735 ((uint32_t)(signalyzer_h_side
<< 8) | 0x01));
3736 if (status
!= FT_OK
) {
3737 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3738 ftd2xx_status_string(status
));
3739 return ERROR_JTAG_DEVICE_ERROR
;
3742 status
= signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR
,
3743 SIGNALYZER_COMMAND_POWERCONTROL_SET
);
3744 if (status
!= FT_OK
) {
3745 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3746 ftd2xx_status_string(status
));
3747 return ERROR_JTAG_DEVICE_ERROR
;
3750 /* set gpio mode register */
3751 status
= signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR
,
3752 (uint32_t)(signalyzer_h_side
<< 8));
3753 if (status
!= FT_OK
) {
3754 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3755 ftd2xx_status_string(status
));
3756 return ERROR_JTAG_DEVICE_ERROR
;
3759 status
= signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR
+ 1, 0x0000);
3760 if (status
!= FT_OK
) {
3761 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3762 ftd2xx_status_string(status
));
3763 return ERROR_JTAG_DEVICE_ERROR
;
3766 status
= signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR
, SIGNALYZER_COMMAND_GPIO_MODE
);
3767 if (status
!= FT_OK
) {
3768 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3769 ftd2xx_status_string(status
));
3770 return ERROR_JTAG_DEVICE_ERROR
;
3773 /* set gpio register */
3774 status
= signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR
,
3775 (uint32_t)(signalyzer_h_side
<< 8));
3776 if (status
!= FT_OK
) {
3777 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3778 ftd2xx_status_string(status
));
3779 return ERROR_JTAG_DEVICE_ERROR
;
3782 status
= signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR
+ 1, 0x4040);
3783 if (status
!= FT_OK
) {
3784 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3785 ftd2xx_status_string(status
));
3786 return ERROR_JTAG_DEVICE_ERROR
;
3789 status
= signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR
,
3790 SIGNALYZER_COMMAND_GPIO_STATE
);
3791 if (status
!= FT_OK
) {
3792 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3793 ftd2xx_status_string(status
));
3794 return ERROR_JTAG_DEVICE_ERROR
;
3798 /* ADAPTOR: EM_ARM_JTAG, EM_ARM_JTAG_P, EM_JTAG, EM_JTAG_P */
3799 else if ((signalyzer_h_adapter_type
== SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG
) ||
3800 (signalyzer_h_adapter_type
== SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG_P
) ||
3801 (signalyzer_h_adapter_type
== SIGNALYZER_MODULE_TYPE_EM_JTAG
) ||
3802 (signalyzer_h_adapter_type
== SIGNALYZER_MODULE_TYPE_EM_JTAG_P
)) {
3803 if (signalyzer_h_adapter_type
3804 == SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG
)
3805 LOG_INFO("Signalyzer: EM-ARM-JTAG (ARM JTAG) "
3806 "detected. (HW: %2x).", (read_buf
[1] >> 8));
3807 else if (signalyzer_h_adapter_type
3808 == SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG_P
)
3809 LOG_INFO("Signalyzer: EM-ARM-JTAG_P "
3810 "(ARM JTAG with PSU) detected. (HW: %2x).",
3811 (read_buf
[1] >> 8));
3812 else if (signalyzer_h_adapter_type
3813 == SIGNALYZER_MODULE_TYPE_EM_JTAG
)
3814 LOG_INFO("Signalyzer: EM-JTAG (Generic JTAG) "
3815 "detected. (HW: %2x).", (read_buf
[1] >> 8));
3816 else if (signalyzer_h_adapter_type
3817 == SIGNALYZER_MODULE_TYPE_EM_JTAG_P
)
3818 LOG_INFO("Signalyzer: EM-JTAG-P "
3819 "(Generic JTAG with PSU) detected. (HW: %2x).",
3820 (read_buf
[1] >> 8));
3828 low_direction
= 0x1b;
3831 high_direction
= 0x1f;
3833 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
) {
3834 high_output
|= nTRSTnOE
;
3835 high_output
&= ~nTRST
;
3837 high_output
&= ~nTRSTnOE
;
3838 high_output
|= nTRST
;
3841 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
) {
3842 high_output
&= ~nSRSTnOE
;
3843 high_output
|= nSRST
;
3845 high_output
|= nSRSTnOE
;
3846 high_output
&= ~nSRST
;
3849 #if BUILD_FT2232_FTD2XX == 1
3850 /* enable power to the module */
3851 status
= signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR
,
3852 ((uint32_t)(signalyzer_h_side
<< 8) | 0x01));
3853 if (status
!= FT_OK
) {
3854 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3855 ftd2xx_status_string(status
));
3856 return ERROR_JTAG_DEVICE_ERROR
;
3859 status
= signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR
,
3860 SIGNALYZER_COMMAND_POWERCONTROL_SET
);
3861 if (status
!= FT_OK
) {
3862 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3863 ftd2xx_status_string(status
));
3864 return ERROR_JTAG_DEVICE_ERROR
;
3867 /* set gpio mode register (IO_16 and IO_17 set as analog
3868 * inputs, other is gpio)
3870 status
= signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR
,
3871 (uint32_t)(signalyzer_h_side
<< 8));
3872 if (status
!= FT_OK
) {
3873 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3874 ftd2xx_status_string(status
));
3875 return ERROR_JTAG_DEVICE_ERROR
;
3878 status
= signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR
+ 1, 0x0060);
3879 if (status
!= FT_OK
) {
3880 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3881 ftd2xx_status_string(status
));
3882 return ERROR_JTAG_DEVICE_ERROR
;
3885 status
= signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR
, SIGNALYZER_COMMAND_GPIO_MODE
);
3886 if (status
!= FT_OK
) {
3887 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3888 ftd2xx_status_string(status
));
3889 return ERROR_JTAG_DEVICE_ERROR
;
3892 /* set gpio register (all inputs, for -P modules,
3893 * PSU will be turned off)
3895 status
= signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR
,
3896 (uint32_t)(signalyzer_h_side
<< 8));
3897 if (status
!= FT_OK
) {
3898 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3899 ftd2xx_status_string(status
));
3900 return ERROR_JTAG_DEVICE_ERROR
;
3903 status
= signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR
+ 1, 0x0000);
3904 if (status
!= FT_OK
) {
3905 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3906 ftd2xx_status_string(status
));
3907 return ERROR_JTAG_DEVICE_ERROR
;
3910 status
= signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR
, SIGNALYZER_COMMAND_GPIO_STATE
);
3911 if (status
!= FT_OK
) {
3912 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3913 ftd2xx_status_string(status
));
3914 return ERROR_JTAG_DEVICE_ERROR
;
3917 } else if (signalyzer_h_adapter_type
== 0x0000) {
3918 LOG_INFO("Signalyzer: No external modules were detected.");
3926 low_direction
= 0x1b;
3929 high_direction
= 0x0;
3931 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
) {
3932 low_direction
&= ~nTRSTnOE
; /* nTRST input */
3933 low_output
&= ~nTRST
; /* nTRST = 0 */
3935 low_direction
|= nTRSTnOE
; /* nTRST output */
3936 low_output
|= nTRST
; /* nTRST = 1 */
3939 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
) {
3940 low_direction
|= nSRSTnOE
; /* nSRST output */
3941 low_output
|= nSRST
; /* nSRST = 1 */
3943 low_direction
&= ~nSRSTnOE
; /* nSRST input */
3944 low_output
&= ~nSRST
; /* nSRST = 0 */
3947 LOG_ERROR("Unknown module type is detected: %.4x",
3948 signalyzer_h_adapter_type
);
3949 return ERROR_JTAG_DEVICE_ERROR
;
3952 /* initialize low byte of controller for jtag operation */
3953 if (ft2232_set_data_bits_low_byte(low_output
, low_direction
) != ERROR_OK
) {
3954 LOG_ERROR("couldn't initialize Signalyzer-H layout");
3955 return ERROR_JTAG_INIT_FAILED
;
3958 #if BUILD_FT2232_FTD2XX == 1
3959 if (ftdi_device
== FT_DEVICE_2232H
) {
3960 /* initialize high byte of controller for jtag operation */
3961 if (ft2232_set_data_bits_high_byte(high_output
, high_direction
) != ERROR_OK
) {
3962 LOG_ERROR("couldn't initialize Signalyzer-H layout");
3963 return ERROR_JTAG_INIT_FAILED
;
3966 #elif BUILD_FT2232_LIBFTDI == 1
3967 if (ftdi_device
== TYPE_2232H
) {
3968 /* initialize high byte of controller for jtag operation */
3969 if (ft2232_set_data_bits_high_byte(high_output
, high_direction
) != ERROR_OK
) {
3970 LOG_ERROR("couldn't initialize Signalyzer-H layout");
3971 return ERROR_JTAG_INIT_FAILED
;
3978 static void signalyzer_h_reset(int trst
, int srst
)
3980 enum reset_types jtag_reset_config
= jtag_get_reset_config();
3982 /* ADAPTOR: EM_LT16_A */
3983 if (signalyzer_h_adapter_type
== SIGNALYZER_MODULE_TYPE_EM_LT16_A
) {
3985 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
3986 /* switch to output pin (output is low) */
3987 low_direction
|= nTRSTnOE
;
3989 /* switch output low */
3990 low_output
&= ~nTRST
;
3991 } else if (trst
== 0) {
3992 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
3993 /* switch to input pin (high-Z + internal
3994 * and external pullup) */
3995 low_direction
&= ~nTRSTnOE
;
3997 /* switch output high */
3998 low_output
|= nTRST
;
4002 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
4003 /* switch output low */
4004 low_output
&= ~nSRST
;
4006 /* switch to output pin (output is low) */
4007 low_direction
|= nSRSTnOE
;
4008 } else if (srst
== 0) {
4009 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
4010 /* switch output high */
4011 low_output
|= nSRST
;
4013 /* switch to input pin (high-Z) */
4014 low_direction
&= ~nSRSTnOE
;
4017 /* command "set data bits low byte" */
4019 buffer_write(low_output
);
4020 buffer_write(low_direction
);
4021 LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, "
4022 "low_direction: 0x%2.2x",
4023 trst
, srst
, low_output
, low_direction
);
4025 /* ADAPTOR: EM_ARM_JTAG, EM_ARM_JTAG_P, EM_JTAG, EM_JTAG_P */
4026 else if ((signalyzer_h_adapter_type
== SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG
) ||
4027 (signalyzer_h_adapter_type
== SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG_P
) ||
4028 (signalyzer_h_adapter_type
== SIGNALYZER_MODULE_TYPE_EM_JTAG
) ||
4029 (signalyzer_h_adapter_type
== SIGNALYZER_MODULE_TYPE_EM_JTAG_P
)) {
4031 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
4032 high_output
&= ~nTRSTnOE
;
4034 high_output
&= ~nTRST
;
4035 } else if (trst
== 0) {
4036 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
4037 high_output
|= nTRSTnOE
;
4039 high_output
|= nTRST
;
4043 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
4044 high_output
&= ~nSRST
;
4046 high_output
&= ~nSRSTnOE
;
4047 } else if (srst
== 0) {
4048 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
4049 high_output
|= nSRST
;
4051 high_output
|= nSRSTnOE
;
4054 /* command "set data bits high byte" */
4056 buffer_write(high_output
);
4057 buffer_write(high_direction
);
4058 LOG_INFO("trst: %i, srst: %i, high_output: 0x%2.2x, "
4059 "high_direction: 0x%2.2x",
4060 trst
, srst
, high_output
, high_direction
);
4061 } else if (signalyzer_h_adapter_type
== 0x0000) {
4063 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
4064 /* switch to output pin (output is low) */
4065 low_direction
|= nTRSTnOE
;
4067 /* switch output low */
4068 low_output
&= ~nTRST
;
4069 } else if (trst
== 0) {
4070 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
4071 /* switch to input pin (high-Z + internal
4072 * and external pullup) */
4073 low_direction
&= ~nTRSTnOE
;
4075 /* switch output high */
4076 low_output
|= nTRST
;
4080 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
4081 /* switch output low */
4082 low_output
&= ~nSRST
;
4084 /* switch to output pin (output is low) */
4085 low_direction
|= nSRSTnOE
;
4086 } else if (srst
== 0) {
4087 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
4088 /* switch output high */
4089 low_output
|= nSRST
;
4091 /* switch to input pin (high-Z) */
4092 low_direction
&= ~nSRSTnOE
;
4095 /* command "set data bits low byte" */
4097 buffer_write(low_output
);
4098 buffer_write(low_direction
);
4099 LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, "
4100 "low_direction: 0x%2.2x",
4101 trst
, srst
, low_output
, low_direction
);
4105 static void signalyzer_h_blink(void)
4107 signalyzer_h_led_set(signalyzer_h_side
, SIGNALYZER_LED_RED
, 100, 0, 1);
4110 /********************************************************************
4111 * Support for KT-LINK
4112 * JTAG adapter from KRISTECH
4113 * http://www.kristech.eu
4114 *******************************************************************/
4115 static int ktlink_init(void)
4117 uint8_t swd_en
= 0x20; /* 0x20 SWD disable, 0x00 SWD enable (ADBUS5) */
4119 low_output
= 0x08 | swd_en
; /* value; TMS=1,TCK=0,TDI=0,SWD=swd_en */
4120 low_direction
= 0x3B; /* out=1; TCK/TDI/TMS=out,TDO=in,SWD=out,RTCK=in,SRSTIN=in */
4122 /* initialize low byte for jtag */
4123 if (ft2232_set_data_bits_low_byte(low_output
, low_direction
) != ERROR_OK
) {
4124 LOG_ERROR("couldn't initialize FT2232 with 'ktlink' layout");
4125 return ERROR_JTAG_INIT_FAILED
;
4133 high_output
= 0x80; /* turn LED on */
4134 high_direction
= 0xFF; /* all outputs */
4136 enum reset_types jtag_reset_config
= jtag_get_reset_config();
4138 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
) {
4139 high_output
|= nTRSTnOE
;
4140 high_output
&= ~nTRST
;
4142 high_output
&= ~nTRSTnOE
;
4143 high_output
|= nTRST
;
4146 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
) {
4147 high_output
&= ~nSRSTnOE
;
4148 high_output
|= nSRST
;
4150 high_output
|= nSRSTnOE
;
4151 high_output
&= ~nSRST
;
4154 /* initialize high byte for jtag */
4155 if (ft2232_set_data_bits_high_byte(high_output
, high_direction
) != ERROR_OK
) {
4156 LOG_ERROR("couldn't initialize FT2232 with 'ktlink' layout");
4157 return ERROR_JTAG_INIT_FAILED
;
4163 static void ktlink_reset(int trst
, int srst
)
4165 enum reset_types jtag_reset_config
= jtag_get_reset_config();
4168 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
4169 high_output
&= ~nTRSTnOE
;
4171 high_output
&= ~nTRST
;
4172 } else if (trst
== 0) {
4173 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
4174 high_output
|= nTRSTnOE
;
4176 high_output
|= nTRST
;
4180 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
4181 high_output
&= ~nSRST
;
4183 high_output
&= ~nSRSTnOE
;
4184 } else if (srst
== 0) {
4185 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
4186 high_output
|= nSRST
;
4188 high_output
|= nSRSTnOE
;
4191 buffer_write(0x82); /* command "set data bits high byte" */
4192 buffer_write(high_output
);
4193 buffer_write(high_direction
);
4194 LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x",
4201 static void ktlink_blink(void)
4203 /* LED connected to ACBUS7 */
4204 high_output
^= 0x80;
4206 buffer_write(0x82); /* command "set data bits high byte" */
4207 buffer_write(high_output
);
4208 buffer_write(high_direction
);
4211 /********************************************************************
4212 * Support for Digilent HS-1
4213 * JTAG adapter from Digilent
4214 * http://www.digilent.com
4215 * Author: Stephane Bonnet bonnetst@hds.utc.fr
4216 *******************************************************************/
4218 static int digilent_hs1_init(void)
4220 /* the adapter only supports the base JTAG signals, no nTRST
4223 low_direction
= 0x8b;
4225 /* initialize low byte for jtag */
4226 if (ft2232_set_data_bits_low_byte(low_output
, low_direction
) != ERROR_OK
) {
4227 LOG_ERROR("couldn't initialize FT2232 with 'digilent_hs1' layout");
4228 return ERROR_JTAG_INIT_FAILED
;
4233 static void digilent_hs1_reset(int trst
, int srst
)
4235 /* Dummy function, no reset signals supported. */
4238 static const struct command_registration ft2232_command_handlers
[] = {
4240 .name
= "ft2232_device_desc",
4241 .handler
= &ft2232_handle_device_desc_command
,
4242 .mode
= COMMAND_CONFIG
,
4243 .help
= "set the USB device description of the FTDI FT2232 device",
4244 .usage
= "description_string",
4247 .name
= "ft2232_serial",
4248 .handler
= &ft2232_handle_serial_command
,
4249 .mode
= COMMAND_CONFIG
,
4250 .help
= "set the serial number of the FTDI FT2232 device",
4251 .usage
= "serial_string",
4254 .name
= "ft2232_layout",
4255 .handler
= &ft2232_handle_layout_command
,
4256 .mode
= COMMAND_CONFIG
,
4257 .help
= "set the layout of the FT2232 GPIO signals used "
4258 "to control output-enables and reset signals",
4259 .usage
= "layout_name",
4262 .name
= "ft2232_vid_pid",
4263 .handler
= &ft2232_handle_vid_pid_command
,
4264 .mode
= COMMAND_CONFIG
,
4265 .help
= "the vendor ID and product ID of the FTDI FT2232 device",
4266 .usage
= "(vid pid)* ",
4269 .name
= "ft2232_latency",
4270 .handler
= &ft2232_handle_latency_command
,
4271 .mode
= COMMAND_CONFIG
,
4272 .help
= "set the FT2232 latency timer to a new value",
4276 .name
= "ft2232_channel",
4277 .handler
= &ft2232_handle_channel_command
,
4278 .mode
= COMMAND_CONFIG
,
4279 .help
= "set the FT2232 channel to a new value",
4282 COMMAND_REGISTRATION_DONE
4285 struct jtag_interface ft2232_interface
= {
4287 .supported
= DEBUG_CAP_TMS_SEQ
,
4288 .commands
= ft2232_command_handlers
,
4289 .transports
= jtag_only
,
4291 .init
= ft2232_init
,
4292 .quit
= ft2232_quit
,
4293 .speed
= ft2232_speed
,
4294 .speed_div
= ft2232_speed_div
,
4296 .execute_queue
= ft2232_execute_queue
,