src/jtag/startup.tcl

   1 # SPDX-License-Identifier: GPL-2.0-or-later
   2
   3 # Defines basic Tcl procs for OpenOCD JTAG module
   4
   5 # Executed during "init". Can be overridden
   6 # by board/target/... scripts
   7 proc jtag_init {} {
   8         if {[catch {jtag arp_init} err]!=0} {
   9                 # try resetting additionally
  10                 init_reset startup
  11         }
  12 }
  13
  14 # This reset logic may be overridden by board/target/... scripts as needed
  15 # to provide a reset that, if possible, is close to a power-up reset.
  16 #
  17 # Exit requirements include:  (a) JTAG must be working, (b) the scan
  18 # chain was validated with "jtag arp_init" (or equivalent), (c) nothing
  19 # stays in reset.  No TAP-specific scans were performed.  It's OK if
  20 # some targets haven't been reset yet; they may need TAP-specific scans.
  21 #
  22 # The "mode" values include:  halt, init, run (from "reset" command);
  23 # startup (at OpenOCD server startup, when JTAG may not yet work); and
  24 # potentially more (for reset types like cold, warm, etc)
  25 proc init_reset { mode } {
  26         if {[using_jtag]} {
  27                 jtag arp_init-reset
  28         }
  29 }
  30
  31 #########
  32
  33 # TODO: power_restore and power_dropout are currently neither
  34 # documented nor supported.
  35
  36 proc power_restore {} {
  37         echo "Sensed power restore, running reset init and halting GDB."
  38         reset init
  39
  40         # Halt GDB so user can deal with a detected power restore.
  41         #
  42         # After GDB is halted, then output is no longer forwarded
  43         # to the GDB console.
  44         set targets [target names]
  45         foreach t $targets {
  46                 # New event script.
  47                 $t invoke-event arp_halt_gdb
  48         }
  49 }
  50
  51 add_help_text power_restore "Overridable procedure run when power restore is detected. Runs 'reset init' by default."
  52
  53 proc power_dropout {} {
  54         echo "Sensed power dropout."
  55 }
  56
  57 #########
  58
  59 # TODO: srst_deasserted and srst_asserted are currently neither
  60 # documented nor supported.
  61
  62 proc srst_deasserted {} {
  63         echo "Sensed nSRST deasserted, running reset init and halting GDB."
  64         reset init
  65
  66         # Halt GDB so user can deal with a detected reset.
  67         #
  68         # After GDB is halted, then output is no longer forwarded
  69         # to the GDB console.
  70         set targets [target names]
  71         foreach t $targets {
  72                 # New event script.
  73                 $t invoke-event arp_halt_gdb
  74         }
  75 }
  76
  77 add_help_text srst_deasserted "Overridable procedure run when srst deassert is detected. Runs 'reset init' by default."
  78
  79 proc srst_asserted {} {
  80         echo "Sensed nSRST asserted."
  81 }
  82
  83 # measure actual JTAG clock
  84 proc measure_clk {} {
  85         set start_time [ms];
  86         set iterations 10000000;
  87         runtest $iterations;
  88         set speed [expr "$iterations.0 / ([ms] - $start_time)"]
  89         echo "Running at more than $speed kHz";
  90 }
  91
  92 add_help_text measure_clk "Runs a test to measure the JTAG clk. Useful with RCLK / RTCK."
  93
  94 proc default_to_jtag { f args } {
  95         set current_transport [transport select]
  96         if {[using_jtag]} {
  97                 eval $f $args
  98         } {
  99                 error "session transport is \"$current_transport\" but your config requires JTAG"
 100         }
 101 }
 102
 103 proc jtag args {
 104         eval default_to_jtag jtag $args
 105 }
 106
 107 proc jtag_rclk args {
 108         eval default_to_jtag jtag_rclk $args
 109 }
 110
 111 proc jtag_ntrst_delay args {
 112         eval default_to_jtag jtag_ntrst_delay $args
 113 }
 114
 115 proc jtag_ntrst_assert_width args {
 116         eval default_to_jtag jtag_ntrst_assert_width $args
 117 }
 118
 119 # BEGIN MIGRATION AIDS ...  these adapter operations originally had
 120 # JTAG-specific names despite the fact that the operations were not
 121 # specific to JTAG, or otherwise had troublesome/misleading names.
 122 #
 123 # FIXME phase these aids out after some releases
 124 #
 125 lappend _telnet_autocomplete_skip jtag_reset
 126 proc jtag_reset args {
 127         echo "DEPRECATED! use 'adapter \[de\]assert' not 'jtag_reset'"
 128         switch $args {
 129                 "0 0"
 130                         {eval adapter deassert trst deassert srst}
 131                 "0 1"
 132                         {eval adapter deassert trst assert srst}
 133                 "1 0"
 134                         {eval adapter assert trst deassert srst}
 135                 "1 1"
 136                         {eval adapter assert trst assert srst}
 137                 default
 138                         {return -code 1 -level 1 "jtag_reset: syntax error"}
 139         }
 140 }
 141
 142 lappend _telnet_autocomplete_skip adapter_khz
 143 proc adapter_khz args {
 144         echo "DEPRECATED! use 'adapter speed' not 'adapter_khz'"
 145         eval adapter speed $args
 146 }
 147
 148 lappend _telnet_autocomplete_skip adapter_name
 149 proc adapter_name args {
 150         echo "DEPRECATED! use 'adapter name' not 'adapter_name'"
 151         eval adapter name $args
 152 }
 153
 154 lappend _telnet_autocomplete_skip adapter_nsrst_delay
 155 proc adapter_nsrst_delay args {
 156         echo "DEPRECATED! use 'adapter srst delay' not 'adapter_nsrst_delay'"
 157         eval adapter srst delay $args
 158 }
 159
 160 lappend _telnet_autocomplete_skip adapter_nsrst_assert_width
 161 proc adapter_nsrst_assert_width args {
 162         echo "DEPRECATED! use 'adapter srst pulse_width' not 'adapter_nsrst_assert_width'"
 163         eval adapter srst pulse_width $args
 164 }
 165
 166 lappend _telnet_autocomplete_skip interface
 167 proc interface args {
 168         echo "DEPRECATED! use 'adapter driver' not 'interface'"
 169         eval adapter driver $args
 170 }
 171
 172 lappend _telnet_autocomplete_skip interface_transports
 173 proc  interface_transports args {
 174         echo "DEPRECATED! use 'adapter transports' not 'interface_transports'"
 175         eval adapter transports $args
 176 }
 177
 178 lappend _telnet_autocomplete_skip interface_list
 179 proc  interface_list args {
 180         echo "DEPRECATED! use 'adapter list' not 'interface_list'"
 181         eval adapter list $args
 182 }
 183
 184 lappend _telnet_autocomplete_skip ftdi_location
 185 proc ftdi_location args {
 186         echo "DEPRECATED! use 'adapter usb location' not 'ftdi_location'"
 187         eval adapter usb location $args
 188 }
 189
 190 lappend _telnet_autocomplete_skip xds110_serial
 191 proc xds110_serial args {
 192         echo "DEPRECATED! use 'adapter serial' not 'xds110_serial'"
 193         eval adapter serial $args
 194 }
 195
 196 lappend _telnet_autocomplete_skip xds110_supply_voltage
 197 proc xds110_supply_voltage args {
 198         echo "DEPRECATED! use 'xds110 supply' not 'xds110_supply_voltage'"
 199         eval xds110 supply $args
 200 }
 201
 202 proc hla {cmd args} {
 203         tailcall "hla $cmd" {*}$args
 204 }
 205
 206 lappend _telnet_autocomplete_skip "hla newtap"
 207 proc "hla newtap" {args} {
 208         echo "DEPRECATED! use 'swj_newdap' not 'hla newtap'"
 209         eval swj_newdap $args
 210 }
 211
 212 lappend _telnet_autocomplete_skip ftdi_device_desc
 213 proc ftdi_device_desc args {
 214         echo "DEPRECATED! use 'ftdi device_desc' not 'ftdi_device_desc'"
 215         eval ftdi device_desc $args
 216 }
 217
 218 lappend _telnet_autocomplete_skip ftdi_serial
 219 proc ftdi_serial args {
 220         echo "DEPRECATED! use 'adapter serial' not 'ftdi_serial'"
 221         eval adapter serial $args
 222 }
 223
 224 lappend _telnet_autocomplete_skip ftdi_channel
 225 proc ftdi_channel args {
 226         echo "DEPRECATED! use 'ftdi channel' not 'ftdi_channel'"
 227         eval ftdi channel $args
 228 }
 229
 230 lappend _telnet_autocomplete_skip ftdi_layout_init
 231 proc ftdi_layout_init args {
 232         echo "DEPRECATED! use 'ftdi layout_init' not 'ftdi_layout_init'"
 233         eval ftdi layout_init $args
 234 }
 235
 236 lappend _telnet_autocomplete_skip ftdi_layout_signal
 237 proc ftdi_layout_signal args {
 238         echo "DEPRECATED! use 'ftdi layout_signal' not 'ftdi_layout_signal'"
 239         eval ftdi layout_signal $args
 240 }
 241
 242 lappend _telnet_autocomplete_skip ftdi_set_signal
 243 proc ftdi_set_signal args {
 244         echo "DEPRECATED! use 'ftdi set_signal' not 'ftdi_set_signal'"
 245         eval ftdi set_signal $args
 246 }
 247
 248 lappend _telnet_autocomplete_skip ftdi_get_signal
 249 proc ftdi_get_signal args {
 250         echo "DEPRECATED! use 'ftdi get_signal' not 'ftdi_get_signal'"
 251         eval ftdi get_signal $args
 252 }
 253
 254 lappend _telnet_autocomplete_skip ftdi_vid_pid
 255 proc ftdi_vid_pid args {
 256         echo "DEPRECATED! use 'ftdi vid_pid' not 'ftdi_vid_pid'"
 257         eval ftdi vid_pid $args
 258 }
 259
 260 lappend _telnet_autocomplete_skip ftdi_tdo_sample_edge
 261 proc ftdi_tdo_sample_edge args {
 262         echo "DEPRECATED! use 'ftdi tdo_sample_edge' not 'ftdi_tdo_sample_edge'"
 263         eval ftdi tdo_sample_edge $args
 264 }
 265
 266 lappend _telnet_autocomplete_skip remote_bitbang_host
 267 proc remote_bitbang_host args {
 268         echo "DEPRECATED! use 'remote_bitbang host' not 'remote_bitbang_host'"
 269         eval remote_bitbang host $args
 270 }
 271
 272 lappend _telnet_autocomplete_skip remote_bitbang_port
 273 proc remote_bitbang_port args {
 274         echo "DEPRECATED! use 'remote_bitbang port' not 'remote_bitbang_port'"
 275         eval remote_bitbang port $args
 276 }
 277
 278 lappend _telnet_autocomplete_skip openjtag_device_desc
 279 proc openjtag_device_desc args {
 280         echo "DEPRECATED! use 'openjtag device_desc' not 'openjtag_device_desc'"
 281         eval openjtag device_desc $args
 282 }
 283
 284 lappend _telnet_autocomplete_skip openjtag_variant
 285 proc openjtag_variant args {
 286         echo "DEPRECATED! use 'openjtag variant' not 'openjtag_variant'"
 287         eval openjtag variant $args
 288 }
 289
 290 lappend _telnet_autocomplete_skip parport_port
 291 proc parport_port args {
 292         echo "DEPRECATED! use 'parport port' not 'parport_port'"
 293         eval parport port $args
 294 }
 295
 296 lappend _telnet_autocomplete_skip parport_cable
 297 proc parport_cable args {
 298         echo "DEPRECATED! use 'parport cable' not 'parport_cable'"
 299         eval parport cable $args
 300 }
 301
 302 lappend _telnet_autocomplete_skip parport_write_on_exit
 303 proc parport_write_on_exit args {
 304         echo "DEPRECATED! use 'parport write_on_exit' not 'parport_write_on_exit'"
 305         eval parport write_on_exit $args
 306 }
 307
 308 lappend _telnet_autocomplete_skip parport_toggling_time
 309 proc parport_toggling_time args {
 310         echo "DEPRECATED! use 'parport toggling_time' not 'parport_toggling_time'"
 311         eval parport toggling_time $args
 312 }
 313
 314 lappend _telnet_autocomplete_skip jtag_dpi_set_port
 315 proc jtag_dpi_set_port args {
 316         echo "DEPRECATED! use 'jtag_dpi set_port' not 'jtag_dpi_set_port'"
 317         eval jtag_dpi set_port $args
 318 }
 319
 320 lappend _telnet_autocomplete_skip jtag_dpi_set_address
 321 proc jtag_dpi_set_address args {
 322         echo "DEPRECATED! use 'jtag_dpi set_address' not 'jtag_dpi_set_address'"
 323         eval jtag_dpi set_address $args
 324 }
 325
 326 lappend _telnet_autocomplete_skip jtag_vpi_set_port
 327 proc jtag_vpi_set_port args {
 328         echo "DEPRECATED! use 'jtag_vpi set_port' not 'jtag_vpi_set_port'"
 329         eval jtag_vpi set_port $args
 330 }
 331
 332 lappend _telnet_autocomplete_skip jtag_vpi_set_address
 333 proc jtag_vpi_set_address args {
 334         echo "DEPRECATED! use 'jtag_vpi set_address' not 'jtag_vpi_set_address'"
 335         eval jtag_vpi set_address $args
 336 }
 337
 338 lappend _telnet_autocomplete_skip jtag_vpi_stop_sim_on_exit
 339 proc jtag_vpi_stop_sim_on_exit args {
 340         echo "DEPRECATED! use 'jtag_vpi stop_sim_on_exit' not 'jtag_vpi_stop_sim_on_exit'"
 341         eval jtag_vpi stop_sim_on_exit $args
 342 }
 343
 344 lappend _telnet_autocomplete_skip presto_serial
 345 proc presto_serial args {
 346         echo "DEPRECATED! use 'presto serial' not 'presto_serial'"
 347         eval presto serial $args
 348 }
 349
 350 lappend _telnet_autocomplete_skip xlnx_pcie_xvc_config
 351 proc xlnx_pcie_xvc_config args {
 352         echo "DEPRECATED! use 'xlnx_pcie_xvc config' not 'xlnx_pcie_xvc_config'"
 353         eval xlnx_pcie_xvc config $args
 354 }
 355
 356 lappend _telnet_autocomplete_skip ulink_download_firmware
 357 proc ulink_download_firmware args {
 358         echo "DEPRECATED! use 'ulink download_firmware' not 'ulink_download_firmware'"
 359         eval ulink download_firmware $args
 360 }
 361
 362 lappend _telnet_autocomplete_skip vsllink_usb_vid
 363 proc vsllink_usb_vid args {
 364         echo "DEPRECATED! use 'vsllink usb_vid' not 'vsllink_usb_vid'"
 365         eval vsllink usb_vid $args
 366 }
 367
 368 lappend _telnet_autocomplete_skip vsllink_usb_pid
 369 proc vsllink_usb_pid args {
 370         echo "DEPRECATED! use 'vsllink usb_pid' not 'vsllink_usb_pid'"
 371         eval vsllink usb_pid $args
 372 }
 373
 374 lappend _telnet_autocomplete_skip vsllink_usb_serial
 375 proc vsllink_usb_serial args {
 376         echo "DEPRECATED! use 'adapter serial' not 'vsllink_usb_serial'"
 377         eval adapter serial $args
 378 }
 379
 380 lappend _telnet_autocomplete_skip vsllink_usb_bulkin
 381 proc vsllink_usb_bulkin args {
 382         echo "DEPRECATED! use 'vsllink usb_bulkin' not 'vsllink_usb_bulkin'"
 383         eval vsllink usb_bulkin $args
 384 }
 385
 386 lappend _telnet_autocomplete_skip vsllink_usb_bulkout
 387 proc vsllink_usb_bulkout args {
 388         echo "DEPRECATED! use 'vsllink usb_bulkout' not 'vsllink_usb_bulkout'"
 389         eval vsllink usb_bulkout $args
 390 }
 391
 392 lappend _telnet_autocomplete_skip vsllink_usb_interface
 393 proc vsllink_usb_interface args {
 394         echo "DEPRECATED! use 'vsllink usb_interface' not 'vsllink_usb_interface'"
 395         eval vsllink usb_interface $args
 396 }
 397
 398 lappend _telnet_autocomplete_skip bcm2835gpio_jtag_nums
 399 proc bcm2835gpio_jtag_nums args {
 400         echo "DEPRECATED! use 'bcm2835gpio jtag_nums' not 'bcm2835gpio_jtag_nums'"
 401         eval bcm2835gpio jtag_nums $args
 402 }
 403
 404 lappend _telnet_autocomplete_skip bcm2835gpio_tck_num
 405 proc bcm2835gpio_tck_num args {
 406         echo "DEPRECATED! use 'bcm2835gpio tck_num' not 'bcm2835gpio_tck_num'"
 407         eval bcm2835gpio tck_num $args
 408 }
 409
 410 lappend _telnet_autocomplete_skip bcm2835gpio_tms_num
 411 proc bcm2835gpio_tms_num args {
 412         echo "DEPRECATED! use 'bcm2835gpio tms_num' not 'bcm2835gpio_tms_num'"
 413         eval bcm2835gpio tms_num $args
 414 }
 415
 416 lappend _telnet_autocomplete_skip bcm2835gpio_tdo_num
 417 proc bcm2835gpio_tdo_num args {
 418         echo "DEPRECATED! use 'bcm2835gpio tdo_num' not 'bcm2835gpio_tdo_num'"
 419         eval bcm2835gpio tdo_num $args
 420 }
 421
 422 lappend _telnet_autocomplete_skip bcm2835gpio_tdi_num
 423 proc bcm2835gpio_tdi_num args {
 424         echo "DEPRECATED! use 'bcm2835gpio tdi_num' not 'bcm2835gpio_tdi_num'"
 425         eval bcm2835gpio tdi_num $args
 426 }
 427
 428 lappend _telnet_autocomplete_skip bcm2835gpio_swd_nums
 429 proc bcm2835gpio_swd_nums args {
 430         echo "DEPRECATED! use 'bcm2835gpio swd_nums' not 'bcm2835gpio_swd_nums'"
 431         eval bcm2835gpio swd_nums $args
 432 }
 433
 434 lappend _telnet_autocomplete_skip bcm2835gpio_swclk_num
 435 proc bcm2835gpio_swclk_num args {
 436         echo "DEPRECATED! use 'bcm2835gpio swclk_num' not 'bcm2835gpio_swclk_num'"
 437         eval bcm2835gpio swclk_num $args
 438 }
 439
 440 lappend _telnet_autocomplete_skip bcm2835gpio_swdio_num
 441 proc bcm2835gpio_swdio_num args {
 442         echo "DEPRECATED! use 'bcm2835gpio swdio_num' not 'bcm2835gpio_swdio_num'"
 443         eval bcm2835gpio swdio_num $args
 444 }
 445
 446 lappend _telnet_autocomplete_skip bcm2835gpio_swdio_dir_num
 447 proc bcm2835gpio_swdio_dir_num args {
 448         echo "DEPRECATED! use 'bcm2835gpio swdio_dir_num' not 'bcm2835gpio_swdio_dir_num'"
 449         eval bcm2835gpio swdio_dir_num $args
 450 }
 451
 452 lappend _telnet_autocomplete_skip bcm2835gpio_srst_num
 453 proc bcm2835gpio_srst_num args {
 454         echo "DEPRECATED! use 'bcm2835gpio srst_num' not 'bcm2835gpio_srst_num'"
 455         eval bcm2835gpio srst_num $args
 456 }
 457
 458 lappend _telnet_autocomplete_skip bcm2835gpio_trst_num
 459 proc bcm2835gpio_trst_num args {
 460         echo "DEPRECATED! use 'bcm2835gpio trst_num' not 'bcm2835gpio_trst_num'"
 461         eval bcm2835gpio trst_num $args
 462 }
 463
 464 lappend _telnet_autocomplete_skip bcm2835gpio_speed_coeffs
 465 proc bcm2835gpio_speed_coeffs args {
 466         echo "DEPRECATED! use 'bcm2835gpio speed_coeffs' not 'bcm2835gpio_speed_coeffs'"
 467         eval bcm2835gpio speed_coeffs $args
 468 }
 469
 470 lappend _telnet_autocomplete_skip bcm2835gpio_peripheral_base
 471 proc bcm2835gpio_peripheral_base args {
 472         echo "DEPRECATED! use 'bcm2835gpio peripheral_base' not 'bcm2835gpio_peripheral_base'"
 473         eval bcm2835gpio peripheral_base $args
 474 }
 475
 476 lappend _telnet_autocomplete_skip linuxgpiod_jtag_nums
 477 proc linuxgpiod_jtag_nums args {
 478         echo "DEPRECATED! use 'linuxgpiod jtag_nums' not 'linuxgpiod_jtag_nums'"
 479         eval linuxgpiod jtag_nums $args
 480 }
 481
 482 lappend _telnet_autocomplete_skip linuxgpiod_tck_num
 483 proc linuxgpiod_tck_num args {
 484         echo "DEPRECATED! use 'linuxgpiod tck_num' not 'linuxgpiod_tck_num'"
 485         eval linuxgpiod tck_num $args
 486 }
 487
 488 lappend _telnet_autocomplete_skip linuxgpiod_tms_num
 489 proc linuxgpiod_tms_num args {
 490         echo "DEPRECATED! use 'linuxgpiod tms_num' not 'linuxgpiod_tms_num'"
 491         eval linuxgpiod tms_num $args
 492 }
 493
 494 lappend _telnet_autocomplete_skip linuxgpiod_tdo_num
 495 proc linuxgpiod_tdo_num args {
 496         echo "DEPRECATED! use 'linuxgpiod tdo_num' not 'linuxgpiod_tdo_num'"
 497         eval linuxgpiod tdo_num $args
 498 }
 499
 500 lappend _telnet_autocomplete_skip linuxgpiod_tdi_num
 501 proc linuxgpiod_tdi_num args {
 502         echo "DEPRECATED! use 'linuxgpiod tdi_num' not 'linuxgpiod_tdi_num'"
 503         eval linuxgpiod tdi_num $args
 504 }
 505
 506 lappend _telnet_autocomplete_skip linuxgpiod_srst_num
 507 proc linuxgpiod_srst_num args {
 508         echo "DEPRECATED! use 'linuxgpiod srst_num' not 'linuxgpiod_srst_num'"
 509         eval linuxgpiod srst_num $args
 510 }
 511
 512 lappend _telnet_autocomplete_skip linuxgpiod_trst_num
 513 proc linuxgpiod_trst_num args {
 514         echo "DEPRECATED! use 'linuxgpiod trst_num' not 'linuxgpiod_trst_num'"
 515         eval linuxgpiod trst_num $args
 516 }
 517
 518 lappend _telnet_autocomplete_skip linuxgpiod_swd_nums
 519 proc linuxgpiod_swd_nums args {
 520         echo "DEPRECATED! use 'linuxgpiod swd_nums' not 'linuxgpiod_swd_nums'"
 521         eval linuxgpiod swd_nums $args
 522 }
 523
 524 lappend _telnet_autocomplete_skip linuxgpiod_swclk_num
 525 proc linuxgpiod_swclk_num args {
 526         echo "DEPRECATED! use 'linuxgpiod swclk_num' not 'linuxgpiod_swclk_num'"
 527         eval linuxgpiod swclk_num $args
 528 }
 529
 530 lappend _telnet_autocomplete_skip linuxgpiod_swdio_num
 531 proc linuxgpiod_swdio_num args {
 532         echo "DEPRECATED! use 'linuxgpiod swdio_num' not 'linuxgpiod_swdio_num'"
 533         eval linuxgpiod swdio_num $args
 534 }
 535
 536 lappend _telnet_autocomplete_skip linuxgpiod_led_num
 537 proc linuxgpiod_led_num args {
 538         echo "DEPRECATED! use 'linuxgpiod led_num' not 'linuxgpiod_led_num'"
 539         eval linuxgpiod led_num $args
 540 }
 541
 542 lappend _telnet_autocomplete_skip linuxgpiod_gpiochip
 543 proc linuxgpiod_gpiochip args {
 544         echo "DEPRECATED! use 'linuxgpiod gpiochip' not 'linuxgpiod_gpiochip'"
 545         eval linuxgpiod gpiochip $args
 546 }
 547
 548 lappend _telnet_autocomplete_skip sysfsgpio_jtag_nums
 549 proc sysfsgpio_jtag_nums args {
 550         echo "DEPRECATED! use 'sysfsgpio jtag_nums' not 'sysfsgpio_jtag_nums'"
 551         eval sysfsgpio jtag_nums $args
 552 }
 553
 554 lappend _telnet_autocomplete_skip sysfsgpio_tck_num
 555 proc sysfsgpio_tck_num args {
 556         echo "DEPRECATED! use 'sysfsgpio tck_num' not 'sysfsgpio_tck_num'"
 557         eval sysfsgpio tck_num $args
 558 }
 559
 560 lappend _telnet_autocomplete_skip sysfsgpio_tms_num
 561 proc sysfsgpio_tms_num args {
 562         echo "DEPRECATED! use 'sysfsgpio tms_num' not 'sysfsgpio_tms_num'"
 563         eval sysfsgpio tms_num $args
 564 }
 565
 566 lappend _telnet_autocomplete_skip sysfsgpio_tdo_num
 567 proc sysfsgpio_tdo_num args {
 568         echo "DEPRECATED! use 'sysfsgpio tdo_num' not 'sysfsgpio_tdo_num'"
 569         eval sysfsgpio tdo_num $args
 570 }
 571
 572 lappend _telnet_autocomplete_skip sysfsgpio_tdi_num
 573 proc sysfsgpio_tdi_num args {
 574         echo "DEPRECATED! use 'sysfsgpio tdi_num' not 'sysfsgpio_tdi_num'"
 575         eval sysfsgpio tdi_num $args
 576 }
 577
 578 lappend _telnet_autocomplete_skip sysfsgpio_srst_num
 579 proc sysfsgpio_srst_num args {
 580         echo "DEPRECATED! use 'sysfsgpio srst_num' not 'sysfsgpio_srst_num'"
 581         eval sysfsgpio srst_num $args
 582 }
 583
 584 lappend _telnet_autocomplete_skip sysfsgpio_trst_num
 585 proc sysfsgpio_trst_num args {
 586         echo "DEPRECATED! use 'sysfsgpio trst_num' not 'sysfsgpio_trst_num'"
 587         eval sysfsgpio trst_num $args
 588 }
 589
 590 lappend _telnet_autocomplete_skip sysfsgpio_swd_nums
 591 proc sysfsgpio_swd_nums args {
 592         echo "DEPRECATED! use 'sysfsgpio swd_nums' not 'sysfsgpio_swd_nums'"
 593         eval sysfsgpio swd_nums $args
 594 }
 595
 596 lappend _telnet_autocomplete_skip sysfsgpio_swclk_num
 597 proc sysfsgpio_swclk_num args {
 598         echo "DEPRECATED! use 'sysfsgpio swclk_num' not 'sysfsgpio_swclk_num'"
 599         eval sysfsgpio swclk_num $args
 600 }
 601
 602 lappend _telnet_autocomplete_skip sysfsgpio_swdio_num
 603 proc sysfsgpio_swdio_num args {
 604         echo "DEPRECATED! use 'sysfsgpio swdio_num' not 'sysfsgpio_swdio_num'"
 605         eval sysfsgpio swdio_num $args
 606 }
 607
 608 lappend _telnet_autocomplete_skip buspirate_adc
 609 proc buspirate_adc args {
 610         echo "DEPRECATED! use 'buspirate adc' not 'buspirate_adc'"
 611         eval buspirate adc $args
 612 }
 613
 614 lappend _telnet_autocomplete_skip buspirate_vreg
 615 proc buspirate_vreg args {
 616         echo "DEPRECATED! use 'buspirate vreg' not 'buspirate_vreg'"
 617         eval buspirate vreg $args
 618 }
 619
 620 lappend _telnet_autocomplete_skip buspirate_pullup
 621 proc buspirate_pullup args {
 622         echo "DEPRECATED! use 'buspirate pullup' not 'buspirate_pullup'"
 623         eval buspirate pullup $args
 624 }
 625
 626 lappend _telnet_autocomplete_skip buspirate_led
 627 proc buspirate_led args {
 628         echo "DEPRECATED! use 'buspirate led' not 'buspirate_led'"
 629         eval buspirate led $args
 630 }
 631
 632 lappend _telnet_autocomplete_skip buspirate_speed
 633 proc buspirate_speed args {
 634         echo "DEPRECATED! use 'buspirate speed' not 'buspirate_speed'"
 635         eval buspirate speed $args
 636 }
 637
 638 lappend _telnet_autocomplete_skip buspirate_mode
 639 proc buspirate_mode args {
 640         echo "DEPRECATED! use 'buspirate mode' not 'buspirate_mode'"
 641         eval buspirate mode $args
 642 }
 643
 644 lappend _telnet_autocomplete_skip buspirate_port
 645 proc buspirate_port args {
 646         echo "DEPRECATED! use 'buspirate port' not 'buspirate_port'"
 647         eval buspirate port $args
 648 }
 649
 650 lappend _telnet_autocomplete_skip usb_blaster_device_desc
 651 proc usb_blaster_device_desc args {
 652         echo "DEPRECATED! use 'usb_blaster device_desc' not 'usb_blaster_device_desc'"
 653         eval usb_blaster device_desc $args
 654 }
 655
 656 lappend _telnet_autocomplete_skip usb_blaster_vid_pid
 657 proc usb_blaster_vid_pid args {
 658         echo "DEPRECATED! use 'usb_blaster vid_pid' not 'usb_blaster_vid_pid'"
 659         eval usb_blaster vid_pid $args
 660 }
 661
 662 lappend _telnet_autocomplete_skip usb_blaster_lowlevel_driver
 663 proc usb_blaster_lowlevel_driver args {
 664         echo "DEPRECATED! use 'usb_blaster lowlevel_driver' not 'usb_blaster_lowlevel_driver'"
 665         eval usb_blaster lowlevel_driver $args
 666 }
 667
 668 lappend _telnet_autocomplete_skip usb_blaster_pin
 669 proc usb_blaster_pin args {
 670         echo "DEPRECATED! use 'usb_blaster pin' not 'usb_blaster_pin'"
 671         eval usb_blaster pin $args
 672 }
 673
 674 lappend _telnet_autocomplete_skip usb_blaster_firmware
 675 proc usb_blaster_firmware args {
 676         echo "DEPRECATED! use 'usb_blaster firmware' not 'usb_blaster_firmware'"
 677         eval usb_blaster firmware $args
 678 }
 679
 680 lappend _telnet_autocomplete_skip ft232r_serial_desc
 681 proc ft232r_serial_desc args {
 682         echo "DEPRECATED! use 'adapter serial_desc' not 'ft232r_serial_desc'"
 683         eval adapter serial_desc $args
 684 }
 685
 686 lappend _telnet_autocomplete_skip ft232r_vid_pid
 687 proc ft232r_vid_pid args {
 688         echo "DEPRECATED! use 'ft232r vid_pid' not 'ft232r_vid_pid'"
 689         eval ft232r vid_pid $args
 690 }
 691
 692 lappend _telnet_autocomplete_skip ft232r_jtag_nums
 693 proc ft232r_jtag_nums args {
 694         echo "DEPRECATED! use 'ft232r jtag_nums' not 'ft232r_jtag_nums'"
 695         eval ft232r jtag_nums $args
 696 }
 697
 698 lappend _telnet_autocomplete_skip ft232r_tck_num
 699 proc ft232r_tck_num args {
 700         echo "DEPRECATED! use 'ft232r tck_num' not 'ft232r_tck_num'"
 701         eval ft232r tck_num $args
 702 }
 703
 704 lappend _telnet_autocomplete_skip ft232r_tms_num
 705 proc ft232r_tms_num args {
 706         echo "DEPRECATED! use 'ft232r tms_num' not 'ft232r_tms_num'"
 707         eval ft232r tms_num $args
 708 }
 709
 710 lappend _telnet_autocomplete_skip ft232r_tdo_num
 711 proc ft232r_tdo_num args {
 712         echo "DEPRECATED! use 'ft232r tdo_num' not 'ft232r_tdo_num'"
 713         eval ft232r tdo_num $args
 714 }
 715
 716 lappend _telnet_autocomplete_skip ft232r_tdi_num
 717 proc ft232r_tdi_num args {
 718         echo "DEPRECATED! use 'ft232r tdi_num' not 'ft232r_tdi_num'"
 719         eval ft232r tdi_num $args
 720 }
 721
 722 lappend _telnet_autocomplete_skip ft232r_srst_num
 723 proc ft232r_srst_num args {
 724         echo "DEPRECATED! use 'ft232r srst_num' not 'ft232r_srst_num'"
 725         eval ft232r srst_num $args
 726 }
 727
 728 lappend _telnet_autocomplete_skip ft232r_trst_num
 729 proc ft232r_trst_num args {
 730         echo "DEPRECATED! use 'ft232r trst_num' not 'ft232r_trst_num'"
 731         eval ft232r trst_num $args
 732 }
 733
 734 lappend _telnet_autocomplete_skip ft232r_restore_serial
 735 proc ft232r_restore_serial args {
 736         echo "DEPRECATED! use 'ft232r restore_serial' not 'ft232r_restore_serial'"
 737         eval ft232r restore_serial $args
 738 }
 739
 740 lappend _telnet_autocomplete_skip "aice serial"
 741 proc "aice serial" {args} {
 742         echo "DEPRECATED! use 'adapter serial' not 'aice serial'"
 743         eval adapter serial $args
 744 }
 745
 746 lappend _telnet_autocomplete_skip cmsis_dap_serial
 747 proc cmsis_dap_serial args {
 748         echo "DEPRECATED! use 'adapter serial' not 'cmsis_dap_serial'"
 749         eval adapter serial $args
 750 }
 751
 752 lappend _telnet_autocomplete_skip "ft232r serial_desc"
 753 proc "ft232r serial_desc" {args} {
 754         echo "DEPRECATED! use 'adapter serial' not 'ft232r serial_desc'"
 755         eval adapter serial $args
 756 }
 757
 758 lappend _telnet_autocomplete_skip "ftdi serial"
 759 proc "ftdi serial" {args} {
 760         echo "DEPRECATED! use 'adapter serial' not 'ftdi serial'"
 761         eval adapter serial $args
 762 }
 763
 764 lappend _telnet_autocomplete_skip hla_serial
 765 proc hla_serial args {
 766         echo "DEPRECATED! use 'adapter serial' not 'hla_serial'"
 767         eval adapter serial $args
 768 }
 769
 770 lappend _telnet_autocomplete_skip "jlink serial"
 771 proc "jlink serial" {args} {
 772         echo "DEPRECATED! use 'adapter serial' not 'jlink serial'"
 773         eval adapter serial $args
 774 }
 775
 776 lappend _telnet_autocomplete_skip kitprog_serial
 777 proc kitprog_serial args {
 778         echo "DEPRECATED! use 'adapter serial' not 'kitprog_serial'"
 779         eval adapter serial $args
 780 }
 781
 782 lappend _telnet_autocomplete_skip "presto serial"
 783 proc "presto serial" {args} {
 784         echo "DEPRECATED! use 'adapter serial' not 'presto serial'"
 785         eval adapter serial $args
 786 }
 787
 788 lappend _telnet_autocomplete_skip "st-link serial"
 789 proc "st-link serial" {args} {
 790         echo "DEPRECATED! use 'adapter serial' not 'st-link serial'"
 791         eval adapter serial $args
 792 }
 793
 794 lappend _telnet_autocomplete_skip "vsllink usb_serial"
 795 proc "vsllink usb_serial" {args} {
 796         echo "DEPRECATED! use 'adapter serial' not 'vsllink usb_serial'"
 797         eval adapter serial $args
 798 }
 799
 800 lappend _telnet_autocomplete_skip "xds110 serial"
 801 proc "xds110 serial" {args} {
 802         echo "DEPRECATED! use 'adapter serial' not 'xds110 serial'"
 803         eval adapter serial $args
 804 }
 805
 806 # END MIGRATION AIDS