arm_adi_v5: check for calloc() return value
[openocd.git] / src / svf / svf.c
blob3021dcb669acaf39b24824000892371d9d66a6f5
1 /***************************************************************************
2 * Copyright (C) 2009 by Simon Qian *
3 * SimonQian@SimonQian.com *
4 * *
5 * This program is free software; you can redistribute it and/or modify *
6 * it under the terms of the GNU General Public License as published by *
7 * the Free Software Foundation; either version 2 of the License, or *
8 * (at your option) any later version. *
9 * *
10 * This program is distributed in the hope that it will be useful, *
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
13 * GNU General Public License for more details. *
14 * *
15 * You should have received a copy of the GNU General Public License *
16 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
17 ***************************************************************************/
19 /* The specification for SVF is available here:
20 * http://www.asset-intertech.com/support/svf.pdf
21 * Below, this document is referred to as the "SVF spec".
23 * The specification for XSVF is available here:
24 * http://www.xilinx.com/support/documentation/application_notes/xapp503.pdf
25 * Below, this document is referred to as the "XSVF spec".
28 #ifdef HAVE_CONFIG_H
29 #include "config.h"
30 #endif
32 #include <jtag/jtag.h>
33 #include "svf.h"
34 #include "helper/system.h"
35 #include <helper/time_support.h>
37 /* SVF command */
38 enum svf_command {
39 ENDDR,
40 ENDIR,
41 FREQUENCY,
42 HDR,
43 HIR,
44 PIO,
45 PIOMAP,
46 RUNTEST,
47 SDR,
48 SIR,
49 STATE,
50 TDR,
51 TIR,
52 TRST,
55 static const char *svf_command_name[14] = {
56 "ENDDR",
57 "ENDIR",
58 "FREQUENCY",
59 "HDR",
60 "HIR",
61 "PIO",
62 "PIOMAP",
63 "RUNTEST",
64 "SDR",
65 "SIR",
66 "STATE",
67 "TDR",
68 "TIR",
69 "TRST"
72 enum trst_mode {
73 TRST_ON,
74 TRST_OFF,
75 TRST_Z,
76 TRST_ABSENT
79 static const char *svf_trst_mode_name[4] = {
80 "ON",
81 "OFF",
82 "Z",
83 "ABSENT"
86 struct svf_statemove {
87 tap_state_t from;
88 tap_state_t to;
89 uint32_t num_of_moves;
90 tap_state_t paths[8];
94 * These paths are from the SVF specification for the STATE command, to be
95 * used when the STATE command only includes the final state. The first
96 * element of the path is the "from" (current) state, and the last one is
97 * the "to" (target) state.
99 * All specified paths are the shortest ones in the JTAG spec, and are thus
100 * not (!!) exact matches for the paths used elsewhere in OpenOCD. Note
101 * that PAUSE-to-PAUSE transitions all go through UPDATE and then CAPTURE,
102 * which has specific effects on the various registers; they are not NOPs.
104 * Paths to RESET are disabled here. As elsewhere in OpenOCD, and in XSVF
105 * and many SVF implementations, we don't want to risk missing that state.
106 * To get to RESET, always we ignore the current state.
108 static const struct svf_statemove svf_statemoves[] = {
109 /* from to num_of_moves, paths[8] */
110 /* {TAP_RESET, TAP_RESET, 1, {TAP_RESET}}, */
111 {TAP_RESET, TAP_IDLE, 2, {TAP_RESET, TAP_IDLE} },
112 {TAP_RESET, TAP_DRPAUSE, 6, {TAP_RESET, TAP_IDLE, TAP_DRSELECT,
113 TAP_DRCAPTURE, TAP_DREXIT1, TAP_DRPAUSE} },
114 {TAP_RESET, TAP_IRPAUSE, 7, {TAP_RESET, TAP_IDLE, TAP_DRSELECT,
115 TAP_IRSELECT, TAP_IRCAPTURE,
116 TAP_IREXIT1, TAP_IRPAUSE} },
118 /* {TAP_IDLE, TAP_RESET, 4, {TAP_IDLE,
119 * TAP_DRSELECT, TAP_IRSELECT, TAP_RESET}}, */
120 {TAP_IDLE, TAP_IDLE, 1, {TAP_IDLE} },
121 {TAP_IDLE, TAP_DRPAUSE, 5, {TAP_IDLE, TAP_DRSELECT, TAP_DRCAPTURE,
122 TAP_DREXIT1, TAP_DRPAUSE} },
123 {TAP_IDLE, TAP_IRPAUSE, 6, {TAP_IDLE, TAP_DRSELECT, TAP_IRSELECT,
124 TAP_IRCAPTURE, TAP_IREXIT1, TAP_IRPAUSE} },
126 /* {TAP_DRPAUSE, TAP_RESET, 6, {TAP_DRPAUSE,
127 * TAP_DREXIT2, TAP_DRUPDATE, TAP_DRSELECT, TAP_IRSELECT, TAP_RESET}}, */
128 {TAP_DRPAUSE, TAP_IDLE, 4, {TAP_DRPAUSE, TAP_DREXIT2, TAP_DRUPDATE,
129 TAP_IDLE} },
130 {TAP_DRPAUSE, TAP_DRPAUSE, 7, {TAP_DRPAUSE, TAP_DREXIT2, TAP_DRUPDATE,
131 TAP_DRSELECT, TAP_DRCAPTURE,
132 TAP_DREXIT1, TAP_DRPAUSE} },
133 {TAP_DRPAUSE, TAP_IRPAUSE, 8, {TAP_DRPAUSE, TAP_DREXIT2, TAP_DRUPDATE,
134 TAP_DRSELECT, TAP_IRSELECT,
135 TAP_IRCAPTURE, TAP_IREXIT1, TAP_IRPAUSE} },
137 /* {TAP_IRPAUSE, TAP_RESET, 6, {TAP_IRPAUSE,
138 * TAP_IREXIT2, TAP_IRUPDATE, TAP_DRSELECT, TAP_IRSELECT, TAP_RESET}}, */
139 {TAP_IRPAUSE, TAP_IDLE, 4, {TAP_IRPAUSE, TAP_IREXIT2, TAP_IRUPDATE,
140 TAP_IDLE} },
141 {TAP_IRPAUSE, TAP_DRPAUSE, 7, {TAP_IRPAUSE, TAP_IREXIT2, TAP_IRUPDATE,
142 TAP_DRSELECT, TAP_DRCAPTURE,
143 TAP_DREXIT1, TAP_DRPAUSE} },
144 {TAP_IRPAUSE, TAP_IRPAUSE, 8, {TAP_IRPAUSE, TAP_IREXIT2, TAP_IRUPDATE,
145 TAP_DRSELECT, TAP_IRSELECT,
146 TAP_IRCAPTURE, TAP_IREXIT1, TAP_IRPAUSE} }
149 #define XXR_TDI (1 << 0)
150 #define XXR_TDO (1 << 1)
151 #define XXR_MASK (1 << 2)
152 #define XXR_SMASK (1 << 3)
153 struct svf_xxr_para {
154 int len;
155 int data_mask;
156 uint8_t *tdi;
157 uint8_t *tdo;
158 uint8_t *mask;
159 uint8_t *smask;
162 struct svf_para {
163 float frequency;
164 tap_state_t ir_end_state;
165 tap_state_t dr_end_state;
166 tap_state_t runtest_run_state;
167 tap_state_t runtest_end_state;
168 enum trst_mode trst_mode;
170 struct svf_xxr_para hir_para;
171 struct svf_xxr_para hdr_para;
172 struct svf_xxr_para tir_para;
173 struct svf_xxr_para tdr_para;
174 struct svf_xxr_para sir_para;
175 struct svf_xxr_para sdr_para;
178 static struct svf_para svf_para;
179 static const struct svf_para svf_para_init = {
180 /* frequency, ir_end_state, dr_end_state, runtest_run_state, runtest_end_state, trst_mode */
181 0, TAP_IDLE, TAP_IDLE, TAP_IDLE, TAP_IDLE, TRST_Z,
182 /* hir_para */
183 /* {len, data_mask, tdi, tdo, mask, smask}, */
184 {0, 0, NULL, NULL, NULL, NULL},
185 /* hdr_para */
186 /* {len, data_mask, tdi, tdo, mask, smask}, */
187 {0, 0, NULL, NULL, NULL, NULL},
188 /* tir_para */
189 /* {len, data_mask, tdi, tdo, mask, smask}, */
190 {0, 0, NULL, NULL, NULL, NULL},
191 /* tdr_para */
192 /* {len, data_mask, tdi, tdo, mask, smask}, */
193 {0, 0, NULL, NULL, NULL, NULL},
194 /* sir_para */
195 /* {len, data_mask, tdi, tdo, mask, smask}, */
196 {0, 0, NULL, NULL, NULL, NULL},
197 /* sdr_para */
198 /* {len, data_mask, tdi, tdo, mask, smask}, */
199 {0, 0, NULL, NULL, NULL, NULL},
202 struct svf_check_tdo_para {
203 int line_num; /* used to record line number of the check operation */
204 /* so more information could be printed */
205 int enabled; /* check is enabled or not */
206 int buffer_offset; /* buffer_offset to buffers */
207 int bit_len; /* bit length to check */
210 #define SVF_CHECK_TDO_PARA_SIZE 1024
211 static struct svf_check_tdo_para *svf_check_tdo_para;
212 static int svf_check_tdo_para_index;
214 static int svf_read_command_from_file(FILE *fd);
215 static int svf_check_tdo(void);
216 static int svf_add_check_para(uint8_t enabled, int buffer_offset, int bit_len);
217 static int svf_run_command(struct command_context *cmd_ctx, char *cmd_str);
218 static int svf_execute_tap(void);
220 static FILE *svf_fd;
221 static char *svf_read_line;
222 static size_t svf_read_line_size;
223 static char *svf_command_buffer;
224 static size_t svf_command_buffer_size;
225 static int svf_line_number;
226 static int svf_getline(char **lineptr, size_t *n, FILE *stream);
228 #define SVF_MAX_BUFFER_SIZE_TO_COMMIT (1024 * 1024)
229 static uint8_t *svf_tdi_buffer, *svf_tdo_buffer, *svf_mask_buffer;
230 static int svf_buffer_index, svf_buffer_size;
231 static int svf_quiet;
232 static int svf_nil;
233 static int svf_ignore_error;
235 /* Targeting particular tap */
236 static int svf_tap_is_specified;
237 static int svf_set_padding(struct svf_xxr_para *para, int len, unsigned char tdi);
239 /* Progress Indicator */
240 static int svf_progress_enabled;
241 static long svf_total_lines;
242 static int svf_percentage;
243 static int svf_last_printed_percentage = -1;
246 * macro is used to print the svf hex buffer at desired debug level
247 * DEBUG, INFO, ERROR, USER
249 #define SVF_BUF_LOG(_lvl, _buf, _nbits, _desc) \
250 svf_hexbuf_print(LOG_LVL_##_lvl, __FILE__, __LINE__, __func__, _buf, _nbits, _desc)
252 static void svf_hexbuf_print(int dbg_lvl, const char *file, unsigned line,
253 const char *function, const uint8_t *buf,
254 int bit_len, const char *desc)
256 int j, len = 0;
257 int byte_len = DIV_ROUND_UP(bit_len, 8);
258 int msbits = bit_len % 8;
260 /* allocate 2 bytes per hex digit */
261 char *prbuf = malloc((byte_len * 2) + 2 + 1);
262 if (!prbuf)
263 return;
265 /* print correct number of bytes, mask excess bits where applicable */
266 uint8_t msb = buf[byte_len - 1] & (msbits ? (1 << msbits) - 1 : 0xff);
267 len = sprintf(prbuf, msbits <= 4 ? "0x%01"PRIx8 : "0x%02"PRIx8, msb);
268 for (j = byte_len - 2; j >= 0; j--)
269 len += sprintf(prbuf + len, "%02"PRIx8, buf[j]);
271 log_printf_lf(dbg_lvl, file, line, function, "%8s = %s", desc ? desc : " ", prbuf);
273 free(prbuf);
276 static int svf_realloc_buffers(size_t len)
278 void *ptr;
280 if (svf_execute_tap() != ERROR_OK)
281 return ERROR_FAIL;
283 ptr = realloc(svf_tdi_buffer, len);
284 if (!ptr)
285 return ERROR_FAIL;
286 svf_tdi_buffer = ptr;
288 ptr = realloc(svf_tdo_buffer, len);
289 if (!ptr)
290 return ERROR_FAIL;
291 svf_tdo_buffer = ptr;
293 ptr = realloc(svf_mask_buffer, len);
294 if (!ptr)
295 return ERROR_FAIL;
296 svf_mask_buffer = ptr;
298 svf_buffer_size = len;
300 return ERROR_OK;
303 static void svf_free_xxd_para(struct svf_xxr_para *para)
305 if (para) {
306 free(para->tdi);
307 para->tdi = NULL;
309 free(para->tdo);
310 para->tdo = NULL;
312 free(para->mask);
313 para->mask = NULL;
315 free(para->smask);
316 para->smask = NULL;
320 int svf_add_statemove(tap_state_t state_to)
322 tap_state_t state_from = cmd_queue_cur_state;
323 unsigned index_var;
325 /* when resetting, be paranoid and ignore current state */
326 if (state_to == TAP_RESET) {
327 if (svf_nil)
328 return ERROR_OK;
330 jtag_add_tlr();
331 return ERROR_OK;
334 for (index_var = 0; index_var < ARRAY_SIZE(svf_statemoves); index_var++) {
335 if ((svf_statemoves[index_var].from == state_from)
336 && (svf_statemoves[index_var].to == state_to)) {
337 if (svf_nil)
338 continue;
339 /* recorded path includes current state ... avoid
340 *extra TCKs! */
341 if (svf_statemoves[index_var].num_of_moves > 1)
342 jtag_add_pathmove(svf_statemoves[index_var].num_of_moves - 1,
343 svf_statemoves[index_var].paths + 1);
344 else
345 jtag_add_pathmove(svf_statemoves[index_var].num_of_moves,
346 svf_statemoves[index_var].paths);
347 return ERROR_OK;
350 LOG_ERROR("SVF: can not move to %s", tap_state_name(state_to));
351 return ERROR_FAIL;
354 COMMAND_HANDLER(handle_svf_command)
356 #define SVF_MIN_NUM_OF_OPTIONS 1
357 #define SVF_MAX_NUM_OF_OPTIONS 5
358 int command_num = 0;
359 int ret = ERROR_OK;
360 int64_t time_measure_ms;
361 int time_measure_s, time_measure_m;
363 /* use NULL to indicate a "plain" svf file which accounts for
364 * any additional devices in the scan chain, otherwise the device
365 * that should be affected
367 struct jtag_tap *tap = NULL;
369 if ((CMD_ARGC < SVF_MIN_NUM_OF_OPTIONS) || (CMD_ARGC > SVF_MAX_NUM_OF_OPTIONS))
370 return ERROR_COMMAND_SYNTAX_ERROR;
372 /* parse command line */
373 svf_quiet = 0;
374 svf_nil = 0;
375 svf_progress_enabled = 0;
376 svf_ignore_error = 0;
377 for (unsigned int i = 0; i < CMD_ARGC; i++) {
378 if (strcmp(CMD_ARGV[i], "-tap") == 0) {
379 tap = jtag_tap_by_string(CMD_ARGV[i+1]);
380 if (!tap) {
381 command_print(CMD, "Tap: %s unknown", CMD_ARGV[i+1]);
382 return ERROR_FAIL;
384 i++;
385 } else if ((strcmp(CMD_ARGV[i],
386 "quiet") == 0) || (strcmp(CMD_ARGV[i], "-quiet") == 0))
387 svf_quiet = 1;
388 else if ((strcmp(CMD_ARGV[i], "nil") == 0) || (strcmp(CMD_ARGV[i], "-nil") == 0))
389 svf_nil = 1;
390 else if ((strcmp(CMD_ARGV[i],
391 "progress") == 0) || (strcmp(CMD_ARGV[i], "-progress") == 0))
392 svf_progress_enabled = 1;
393 else if ((strcmp(CMD_ARGV[i],
394 "ignore_error") == 0) || (strcmp(CMD_ARGV[i], "-ignore_error") == 0))
395 svf_ignore_error = 1;
396 else {
397 svf_fd = fopen(CMD_ARGV[i], "r");
398 if (!svf_fd) {
399 int err = errno;
400 command_print(CMD, "open(\"%s\"): %s", CMD_ARGV[i], strerror(err));
401 /* no need to free anything now */
402 return ERROR_COMMAND_SYNTAX_ERROR;
403 } else
404 LOG_USER("svf processing file: \"%s\"", CMD_ARGV[i]);
408 if (!svf_fd)
409 return ERROR_COMMAND_SYNTAX_ERROR;
411 /* get time */
412 time_measure_ms = timeval_ms();
414 /* init */
415 svf_line_number = 0;
416 svf_command_buffer_size = 0;
418 svf_check_tdo_para_index = 0;
419 svf_check_tdo_para = malloc(sizeof(struct svf_check_tdo_para) * SVF_CHECK_TDO_PARA_SIZE);
420 if (!svf_check_tdo_para) {
421 LOG_ERROR("not enough memory");
422 ret = ERROR_FAIL;
423 goto free_all;
426 svf_buffer_index = 0;
427 /* double the buffer size */
428 /* in case current command cannot be committed, and next command is a bit scan command */
429 /* here is 32K bits for this big scan command, it should be enough */
430 /* buffer will be reallocated if buffer size is not enough */
431 if (svf_realloc_buffers(2 * SVF_MAX_BUFFER_SIZE_TO_COMMIT) != ERROR_OK) {
432 ret = ERROR_FAIL;
433 goto free_all;
436 memcpy(&svf_para, &svf_para_init, sizeof(svf_para));
438 if (!svf_nil) {
439 /* TAP_RESET */
440 jtag_add_tlr();
443 if (tap) {
444 /* Tap is specified, set header/trailer paddings */
445 int header_ir_len = 0, header_dr_len = 0, trailer_ir_len = 0, trailer_dr_len = 0;
446 struct jtag_tap *check_tap;
448 svf_tap_is_specified = 1;
450 for (check_tap = jtag_all_taps(); check_tap; check_tap = check_tap->next_tap) {
451 if (check_tap->abs_chain_position < tap->abs_chain_position) {
452 /* Header */
453 header_ir_len += check_tap->ir_length;
454 header_dr_len++;
455 } else if (check_tap->abs_chain_position > tap->abs_chain_position) {
456 /* Trailer */
457 trailer_ir_len += check_tap->ir_length;
458 trailer_dr_len++;
462 /* HDR %d TDI (0) */
463 if (svf_set_padding(&svf_para.hdr_para, header_dr_len, 0) != ERROR_OK) {
464 LOG_ERROR("failed to set data header");
465 return ERROR_FAIL;
468 /* HIR %d TDI (0xFF) */
469 if (svf_set_padding(&svf_para.hir_para, header_ir_len, 0xFF) != ERROR_OK) {
470 LOG_ERROR("failed to set instruction header");
471 return ERROR_FAIL;
474 /* TDR %d TDI (0) */
475 if (svf_set_padding(&svf_para.tdr_para, trailer_dr_len, 0) != ERROR_OK) {
476 LOG_ERROR("failed to set data trailer");
477 return ERROR_FAIL;
480 /* TIR %d TDI (0xFF) */
481 if (svf_set_padding(&svf_para.tir_para, trailer_ir_len, 0xFF) != ERROR_OK) {
482 LOG_ERROR("failed to set instruction trailer");
483 return ERROR_FAIL;
487 if (svf_progress_enabled) {
488 /* Count total lines in file. */
489 while (!feof(svf_fd)) {
490 svf_getline(&svf_command_buffer, &svf_command_buffer_size, svf_fd);
491 svf_total_lines++;
493 rewind(svf_fd);
495 while (svf_read_command_from_file(svf_fd) == ERROR_OK) {
496 /* Log Output */
497 if (svf_quiet) {
498 if (svf_progress_enabled) {
499 svf_percentage = ((svf_line_number * 20) / svf_total_lines) * 5;
500 if (svf_last_printed_percentage != svf_percentage) {
501 LOG_USER_N("\r%d%% ", svf_percentage);
502 svf_last_printed_percentage = svf_percentage;
505 } else {
506 if (svf_progress_enabled) {
507 svf_percentage = ((svf_line_number * 20) / svf_total_lines) * 5;
508 LOG_USER_N("%3d%% %s", svf_percentage, svf_read_line);
509 } else
510 LOG_USER_N("%s", svf_read_line);
512 /* Run Command */
513 if (svf_run_command(CMD_CTX, svf_command_buffer) != ERROR_OK) {
514 LOG_ERROR("fail to run command at line %d", svf_line_number);
515 ret = ERROR_FAIL;
516 break;
518 command_num++;
521 if ((!svf_nil) && (jtag_execute_queue() != ERROR_OK))
522 ret = ERROR_FAIL;
523 else if (svf_check_tdo() != ERROR_OK)
524 ret = ERROR_FAIL;
526 /* print time */
527 time_measure_ms = timeval_ms() - time_measure_ms;
528 time_measure_s = time_measure_ms / 1000;
529 time_measure_ms %= 1000;
530 time_measure_m = time_measure_s / 60;
531 time_measure_s %= 60;
532 if (time_measure_ms < 1000)
533 command_print(CMD,
534 "\r\nTime used: %dm%ds%" PRId64 "ms ",
535 time_measure_m,
536 time_measure_s,
537 time_measure_ms);
539 free_all:
541 fclose(svf_fd);
542 svf_fd = 0;
544 /* free buffers */
545 free(svf_command_buffer);
546 svf_command_buffer = NULL;
547 svf_command_buffer_size = 0;
549 free(svf_check_tdo_para);
550 svf_check_tdo_para = NULL;
551 svf_check_tdo_para_index = 0;
553 free(svf_tdi_buffer);
554 svf_tdi_buffer = NULL;
556 free(svf_tdo_buffer);
557 svf_tdo_buffer = NULL;
559 free(svf_mask_buffer);
560 svf_mask_buffer = NULL;
562 svf_buffer_index = 0;
563 svf_buffer_size = 0;
565 svf_free_xxd_para(&svf_para.hdr_para);
566 svf_free_xxd_para(&svf_para.hir_para);
567 svf_free_xxd_para(&svf_para.tdr_para);
568 svf_free_xxd_para(&svf_para.tir_para);
569 svf_free_xxd_para(&svf_para.sdr_para);
570 svf_free_xxd_para(&svf_para.sir_para);
572 if (ret == ERROR_OK)
573 command_print(CMD,
574 "svf file programmed %s for %d commands with %d errors",
575 (svf_ignore_error > 1) ? "unsuccessfully" : "successfully",
576 command_num,
577 (svf_ignore_error > 1) ? (svf_ignore_error - 1) : 0);
578 else
579 command_print(CMD, "svf file programmed failed");
581 svf_ignore_error = 0;
582 return ret;
585 static int svf_getline(char **lineptr, size_t *n, FILE *stream)
587 #define MIN_CHUNK 16 /* Buffer is increased by this size each time as required */
588 size_t i = 0;
590 if (!*lineptr) {
591 *n = MIN_CHUNK;
592 *lineptr = malloc(*n);
593 if (!*lineptr)
594 return -1;
597 (*lineptr)[0] = fgetc(stream);
598 while ((*lineptr)[i] != '\n') {
599 (*lineptr)[++i] = fgetc(stream);
600 if (feof(stream)) {
601 (*lineptr)[0] = 0;
602 return -1;
604 if ((i + 2) > *n) {
605 *n += MIN_CHUNK;
606 *lineptr = realloc(*lineptr, *n);
610 (*lineptr)[++i] = 0;
612 return sizeof(*lineptr);
615 #define SVFP_CMD_INC_CNT 1024
616 static int svf_read_command_from_file(FILE *fd)
618 unsigned char ch;
619 int i = 0;
620 size_t cmd_pos = 0;
621 int cmd_ok = 0, slash = 0;
623 if (svf_getline(&svf_read_line, &svf_read_line_size, svf_fd) <= 0)
624 return ERROR_FAIL;
625 svf_line_number++;
626 ch = svf_read_line[0];
627 while (!cmd_ok && (ch != 0)) {
628 switch (ch) {
629 case '!':
630 slash = 0;
631 if (svf_getline(&svf_read_line, &svf_read_line_size, svf_fd) <= 0)
632 return ERROR_FAIL;
633 svf_line_number++;
634 i = -1;
635 break;
636 case '/':
637 if (++slash == 2) {
638 slash = 0;
639 if (svf_getline(&svf_read_line, &svf_read_line_size,
640 svf_fd) <= 0)
641 return ERROR_FAIL;
642 svf_line_number++;
643 i = -1;
645 break;
646 case ';':
647 slash = 0;
648 cmd_ok = 1;
649 break;
650 case '\n':
651 svf_line_number++;
652 if (svf_getline(&svf_read_line, &svf_read_line_size, svf_fd) <= 0)
653 return ERROR_FAIL;
654 i = -1;
655 /* fallthrough */
656 case '\r':
657 slash = 0;
658 /* Don't save '\r' and '\n' if no data is parsed */
659 if (!cmd_pos)
660 break;
661 /* fallthrough */
662 default:
663 /* The parsing code currently expects a space
664 * before parentheses -- "TDI (123)". Also a
665 * space afterwards -- "TDI (123) TDO(456)".
666 * But such spaces are optional... instead of
667 * parser updates, cope with that by adding the
668 * spaces as needed.
670 * Ensure there are 3 bytes available, for:
671 * - current character
672 * - added space.
673 * - terminating NUL ('\0')
675 if (cmd_pos + 3 > svf_command_buffer_size) {
676 svf_command_buffer = realloc(svf_command_buffer, cmd_pos + 3);
677 svf_command_buffer_size = cmd_pos + 3;
678 if (!svf_command_buffer) {
679 LOG_ERROR("not enough memory");
680 return ERROR_FAIL;
684 /* insert a space before '(' */
685 if ('(' == ch)
686 svf_command_buffer[cmd_pos++] = ' ';
688 svf_command_buffer[cmd_pos++] = (char)toupper(ch);
690 /* insert a space after ')' */
691 if (')' == ch)
692 svf_command_buffer[cmd_pos++] = ' ';
693 break;
695 ch = svf_read_line[++i];
698 if (cmd_ok) {
699 svf_command_buffer[cmd_pos] = '\0';
700 return ERROR_OK;
701 } else
702 return ERROR_FAIL;
705 static int svf_parse_cmd_string(char *str, int len, char **argus, int *num_of_argu)
707 int pos = 0, num = 0, space_found = 1, in_bracket = 0;
709 while (pos < len) {
710 switch (str[pos]) {
711 case '!':
712 case '/':
713 LOG_ERROR("fail to parse svf command");
714 return ERROR_FAIL;
715 case '(':
716 in_bracket = 1;
717 goto parse_char;
718 case ')':
719 in_bracket = 0;
720 goto parse_char;
721 default:
722 parse_char:
723 if (!in_bracket && isspace((int) str[pos])) {
724 space_found = 1;
725 str[pos] = '\0';
726 } else if (space_found) {
727 argus[num++] = &str[pos];
728 space_found = 0;
730 break;
732 pos++;
735 if (num == 0)
736 return ERROR_FAIL;
738 *num_of_argu = num;
740 return ERROR_OK;
743 bool svf_tap_state_is_stable(tap_state_t state)
745 return (state == TAP_RESET) || (state == TAP_IDLE)
746 || (state == TAP_DRPAUSE) || (state == TAP_IRPAUSE);
749 static int svf_find_string_in_array(char *str, char **strs, int num_of_element)
751 int i;
753 for (i = 0; i < num_of_element; i++) {
754 if (!strcmp(str, strs[i]))
755 return i;
757 return 0xFF;
760 static int svf_adjust_array_length(uint8_t **arr, int orig_bit_len, int new_bit_len)
762 int new_byte_len = (new_bit_len + 7) >> 3;
764 if ((!*arr) || (((orig_bit_len + 7) >> 3) < ((new_bit_len + 7) >> 3))) {
765 free(*arr);
766 *arr = calloc(1, new_byte_len);
767 if (!*arr) {
768 LOG_ERROR("not enough memory");
769 return ERROR_FAIL;
772 return ERROR_OK;
775 static int svf_set_padding(struct svf_xxr_para *para, int len, unsigned char tdi)
777 int error = ERROR_OK;
778 error |= svf_adjust_array_length(&para->tdi, para->len, len);
779 memset(para->tdi, tdi, (len + 7) >> 3);
780 error |= svf_adjust_array_length(&para->tdo, para->len, len);
781 error |= svf_adjust_array_length(&para->mask, para->len, len);
782 para->len = len;
783 para->data_mask = XXR_TDI;
785 return error;
788 static int svf_copy_hexstring_to_binary(char *str, uint8_t **bin, int orig_bit_len, int bit_len)
790 int i, str_len = strlen(str), str_hbyte_len = (bit_len + 3) >> 2;
791 uint8_t ch = 0;
793 if (svf_adjust_array_length(bin, orig_bit_len, bit_len) != ERROR_OK) {
794 LOG_ERROR("fail to adjust length of array");
795 return ERROR_FAIL;
798 /* fill from LSB (end of str) to MSB (beginning of str) */
799 for (i = 0; i < str_hbyte_len; i++) {
800 ch = 0;
801 while (str_len > 0) {
802 ch = str[--str_len];
804 /* Skip whitespace. The SVF specification (rev E) is
805 * deficient in terms of basic lexical issues like
806 * where whitespace is allowed. Long bitstrings may
807 * require line ends for correctness, since there is
808 * a hard limit on line length.
810 if (!isspace(ch)) {
811 if ((ch >= '0') && (ch <= '9')) {
812 ch = ch - '0';
813 break;
814 } else if ((ch >= 'A') && (ch <= 'F')) {
815 ch = ch - 'A' + 10;
816 break;
817 } else {
818 LOG_ERROR("invalid hex string");
819 return ERROR_FAIL;
823 ch = 0;
826 /* write bin */
827 if (i % 2) {
828 /* MSB */
829 (*bin)[i / 2] |= ch << 4;
830 } else {
831 /* LSB */
832 (*bin)[i / 2] = 0;
833 (*bin)[i / 2] |= ch;
837 /* consume optional leading '0' MSBs or whitespace */
838 while (str_len > 0 && ((str[str_len - 1] == '0')
839 || isspace((int) str[str_len - 1])))
840 str_len--;
842 /* check validity: we must have consumed everything */
843 if (str_len > 0 || (ch & ~((2 << ((bit_len - 1) % 4)) - 1)) != 0) {
844 LOG_ERROR("value exceeds length");
845 return ERROR_FAIL;
848 return ERROR_OK;
851 static int svf_check_tdo(void)
853 int i, len, index_var;
855 for (i = 0; i < svf_check_tdo_para_index; i++) {
856 index_var = svf_check_tdo_para[i].buffer_offset;
857 len = svf_check_tdo_para[i].bit_len;
858 if ((svf_check_tdo_para[i].enabled)
859 && buf_cmp_mask(&svf_tdi_buffer[index_var], &svf_tdo_buffer[index_var],
860 &svf_mask_buffer[index_var], len)) {
861 LOG_ERROR("tdo check error at line %d",
862 svf_check_tdo_para[i].line_num);
863 SVF_BUF_LOG(ERROR, &svf_tdi_buffer[index_var], len, "READ");
864 SVF_BUF_LOG(ERROR, &svf_tdo_buffer[index_var], len, "WANT");
865 SVF_BUF_LOG(ERROR, &svf_mask_buffer[index_var], len, "MASK");
867 if (svf_ignore_error == 0)
868 return ERROR_FAIL;
869 else
870 svf_ignore_error++;
873 svf_check_tdo_para_index = 0;
875 return ERROR_OK;
878 static int svf_add_check_para(uint8_t enabled, int buffer_offset, int bit_len)
880 if (svf_check_tdo_para_index >= SVF_CHECK_TDO_PARA_SIZE) {
881 LOG_ERROR("toooooo many operation undone");
882 return ERROR_FAIL;
885 svf_check_tdo_para[svf_check_tdo_para_index].line_num = svf_line_number;
886 svf_check_tdo_para[svf_check_tdo_para_index].bit_len = bit_len;
887 svf_check_tdo_para[svf_check_tdo_para_index].enabled = enabled;
888 svf_check_tdo_para[svf_check_tdo_para_index].buffer_offset = buffer_offset;
889 svf_check_tdo_para_index++;
891 return ERROR_OK;
894 static int svf_execute_tap(void)
896 if ((!svf_nil) && (jtag_execute_queue() != ERROR_OK))
897 return ERROR_FAIL;
898 else if (svf_check_tdo() != ERROR_OK)
899 return ERROR_FAIL;
901 svf_buffer_index = 0;
903 return ERROR_OK;
906 static int svf_run_command(struct command_context *cmd_ctx, char *cmd_str)
908 char *argus[256], command;
909 int num_of_argu = 0, i;
911 /* tmp variable */
912 int i_tmp;
914 /* for RUNTEST */
915 int run_count;
916 float min_time;
917 /* for XXR */
918 struct svf_xxr_para *xxr_para_tmp;
919 uint8_t **pbuffer_tmp;
920 struct scan_field field;
921 /* for STATE */
922 tap_state_t *path = NULL, state;
923 /* flag padding commands skipped due to -tap command */
924 int padding_command_skipped = 0;
926 if (svf_parse_cmd_string(cmd_str, strlen(cmd_str), argus, &num_of_argu) != ERROR_OK)
927 return ERROR_FAIL;
929 /* NOTE: we're a bit loose here, because we ignore case in
930 * TAP state names (instead of insisting on uppercase).
933 command = svf_find_string_in_array(argus[0],
934 (char **)svf_command_name, ARRAY_SIZE(svf_command_name));
935 switch (command) {
936 case ENDDR:
937 case ENDIR:
938 if (num_of_argu != 2) {
939 LOG_ERROR("invalid parameter of %s", argus[0]);
940 return ERROR_FAIL;
943 i_tmp = tap_state_by_name(argus[1]);
945 if (svf_tap_state_is_stable(i_tmp)) {
946 if (command == ENDIR) {
947 svf_para.ir_end_state = i_tmp;
948 LOG_DEBUG("\tIR end_state = %s",
949 tap_state_name(i_tmp));
950 } else {
951 svf_para.dr_end_state = i_tmp;
952 LOG_DEBUG("\tDR end_state = %s",
953 tap_state_name(i_tmp));
955 } else {
956 LOG_ERROR("%s: %s is not a stable state",
957 argus[0], argus[1]);
958 return ERROR_FAIL;
960 break;
961 case FREQUENCY:
962 if ((num_of_argu != 1) && (num_of_argu != 3)) {
963 LOG_ERROR("invalid parameter of %s", argus[0]);
964 return ERROR_FAIL;
966 if (num_of_argu == 1) {
967 /* TODO: set jtag speed to full speed */
968 svf_para.frequency = 0;
969 } else {
970 if (strcmp(argus[2], "HZ")) {
971 LOG_ERROR("HZ not found in FREQUENCY command");
972 return ERROR_FAIL;
974 if (svf_execute_tap() != ERROR_OK)
975 return ERROR_FAIL;
976 svf_para.frequency = atof(argus[1]);
977 /* TODO: set jtag speed to */
978 if (svf_para.frequency > 0) {
979 command_run_linef(cmd_ctx,
980 "adapter speed %d",
981 (int)svf_para.frequency / 1000);
982 LOG_DEBUG("\tfrequency = %f", svf_para.frequency);
985 break;
986 case HDR:
987 if (svf_tap_is_specified) {
988 padding_command_skipped = 1;
989 break;
991 xxr_para_tmp = &svf_para.hdr_para;
992 goto xxr_common;
993 case HIR:
994 if (svf_tap_is_specified) {
995 padding_command_skipped = 1;
996 break;
998 xxr_para_tmp = &svf_para.hir_para;
999 goto xxr_common;
1000 case TDR:
1001 if (svf_tap_is_specified) {
1002 padding_command_skipped = 1;
1003 break;
1005 xxr_para_tmp = &svf_para.tdr_para;
1006 goto xxr_common;
1007 case TIR:
1008 if (svf_tap_is_specified) {
1009 padding_command_skipped = 1;
1010 break;
1012 xxr_para_tmp = &svf_para.tir_para;
1013 goto xxr_common;
1014 case SDR:
1015 xxr_para_tmp = &svf_para.sdr_para;
1016 goto xxr_common;
1017 case SIR:
1018 xxr_para_tmp = &svf_para.sir_para;
1019 goto xxr_common;
1020 xxr_common:
1021 /* XXR length [TDI (tdi)] [TDO (tdo)][MASK (mask)] [SMASK (smask)] */
1022 if ((num_of_argu > 10) || (num_of_argu % 2)) {
1023 LOG_ERROR("invalid parameter of %s", argus[0]);
1024 return ERROR_FAIL;
1026 i_tmp = xxr_para_tmp->len;
1027 xxr_para_tmp->len = atoi(argus[1]);
1028 /* If we are to enlarge the buffers, all parts of xxr_para_tmp
1029 * need to be freed */
1030 if (i_tmp < xxr_para_tmp->len) {
1031 free(xxr_para_tmp->tdi);
1032 xxr_para_tmp->tdi = NULL;
1033 free(xxr_para_tmp->tdo);
1034 xxr_para_tmp->tdo = NULL;
1035 free(xxr_para_tmp->mask);
1036 xxr_para_tmp->mask = NULL;
1037 free(xxr_para_tmp->smask);
1038 xxr_para_tmp->smask = NULL;
1041 LOG_DEBUG("\tlength = %d", xxr_para_tmp->len);
1042 xxr_para_tmp->data_mask = 0;
1043 for (i = 2; i < num_of_argu; i += 2) {
1044 if ((strlen(argus[i + 1]) < 3) || (argus[i + 1][0] != '(') ||
1045 (argus[i + 1][strlen(argus[i + 1]) - 1] != ')')) {
1046 LOG_ERROR("data section error");
1047 return ERROR_FAIL;
1049 argus[i + 1][strlen(argus[i + 1]) - 1] = '\0';
1050 /* TDI, TDO, MASK, SMASK */
1051 if (!strcmp(argus[i], "TDI")) {
1052 /* TDI */
1053 pbuffer_tmp = &xxr_para_tmp->tdi;
1054 xxr_para_tmp->data_mask |= XXR_TDI;
1055 } else if (!strcmp(argus[i], "TDO")) {
1056 /* TDO */
1057 pbuffer_tmp = &xxr_para_tmp->tdo;
1058 xxr_para_tmp->data_mask |= XXR_TDO;
1059 } else if (!strcmp(argus[i], "MASK")) {
1060 /* MASK */
1061 pbuffer_tmp = &xxr_para_tmp->mask;
1062 xxr_para_tmp->data_mask |= XXR_MASK;
1063 } else if (!strcmp(argus[i], "SMASK")) {
1064 /* SMASK */
1065 pbuffer_tmp = &xxr_para_tmp->smask;
1066 xxr_para_tmp->data_mask |= XXR_SMASK;
1067 } else {
1068 LOG_ERROR("unknown parameter: %s", argus[i]);
1069 return ERROR_FAIL;
1071 if (ERROR_OK !=
1072 svf_copy_hexstring_to_binary(&argus[i + 1][1], pbuffer_tmp, i_tmp,
1073 xxr_para_tmp->len)) {
1074 LOG_ERROR("fail to parse hex value");
1075 return ERROR_FAIL;
1077 SVF_BUF_LOG(DEBUG, *pbuffer_tmp, xxr_para_tmp->len, argus[i]);
1079 /* If a command changes the length of the last scan of the same type and the
1080 * MASK parameter is absent, */
1081 /* the mask pattern used is all cares */
1082 if (!(xxr_para_tmp->data_mask & XXR_MASK) && (i_tmp != xxr_para_tmp->len)) {
1083 /* MASK not defined and length changed */
1084 if (ERROR_OK !=
1085 svf_adjust_array_length(&xxr_para_tmp->mask, i_tmp,
1086 xxr_para_tmp->len)) {
1087 LOG_ERROR("fail to adjust length of array");
1088 return ERROR_FAIL;
1090 buf_set_ones(xxr_para_tmp->mask, xxr_para_tmp->len);
1092 /* If TDO is absent, no comparison is needed, set the mask to 0 */
1093 if (!(xxr_para_tmp->data_mask & XXR_TDO)) {
1094 if (!xxr_para_tmp->tdo) {
1095 if (ERROR_OK !=
1096 svf_adjust_array_length(&xxr_para_tmp->tdo, i_tmp,
1097 xxr_para_tmp->len)) {
1098 LOG_ERROR("fail to adjust length of array");
1099 return ERROR_FAIL;
1102 if (!xxr_para_tmp->mask) {
1103 if (ERROR_OK !=
1104 svf_adjust_array_length(&xxr_para_tmp->mask, i_tmp,
1105 xxr_para_tmp->len)) {
1106 LOG_ERROR("fail to adjust length of array");
1107 return ERROR_FAIL;
1110 memset(xxr_para_tmp->mask, 0, (xxr_para_tmp->len + 7) >> 3);
1112 /* do scan if necessary */
1113 if (command == SDR) {
1114 /* check buffer size first, reallocate if necessary */
1115 i = svf_para.hdr_para.len + svf_para.sdr_para.len +
1116 svf_para.tdr_para.len;
1117 if ((svf_buffer_size - svf_buffer_index) < ((i + 7) >> 3)) {
1118 /* reallocate buffer */
1119 if (svf_realloc_buffers(svf_buffer_index + ((i + 7) >> 3)) != ERROR_OK) {
1120 LOG_ERROR("not enough memory");
1121 return ERROR_FAIL;
1125 /* assemble dr data */
1126 i = 0;
1127 buf_set_buf(svf_para.hdr_para.tdi,
1129 &svf_tdi_buffer[svf_buffer_index],
1131 svf_para.hdr_para.len);
1132 i += svf_para.hdr_para.len;
1133 buf_set_buf(svf_para.sdr_para.tdi,
1135 &svf_tdi_buffer[svf_buffer_index],
1137 svf_para.sdr_para.len);
1138 i += svf_para.sdr_para.len;
1139 buf_set_buf(svf_para.tdr_para.tdi,
1141 &svf_tdi_buffer[svf_buffer_index],
1143 svf_para.tdr_para.len);
1144 i += svf_para.tdr_para.len;
1146 /* add check data */
1147 if (svf_para.sdr_para.data_mask & XXR_TDO) {
1148 /* assemble dr mask data */
1149 i = 0;
1150 buf_set_buf(svf_para.hdr_para.mask,
1152 &svf_mask_buffer[svf_buffer_index],
1154 svf_para.hdr_para.len);
1155 i += svf_para.hdr_para.len;
1156 buf_set_buf(svf_para.sdr_para.mask,
1158 &svf_mask_buffer[svf_buffer_index],
1160 svf_para.sdr_para.len);
1161 i += svf_para.sdr_para.len;
1162 buf_set_buf(svf_para.tdr_para.mask,
1164 &svf_mask_buffer[svf_buffer_index],
1166 svf_para.tdr_para.len);
1168 /* assemble dr check data */
1169 i = 0;
1170 buf_set_buf(svf_para.hdr_para.tdo,
1172 &svf_tdo_buffer[svf_buffer_index],
1174 svf_para.hdr_para.len);
1175 i += svf_para.hdr_para.len;
1176 buf_set_buf(svf_para.sdr_para.tdo,
1178 &svf_tdo_buffer[svf_buffer_index],
1180 svf_para.sdr_para.len);
1181 i += svf_para.sdr_para.len;
1182 buf_set_buf(svf_para.tdr_para.tdo,
1184 &svf_tdo_buffer[svf_buffer_index],
1186 svf_para.tdr_para.len);
1187 i += svf_para.tdr_para.len;
1189 svf_add_check_para(1, svf_buffer_index, i);
1190 } else
1191 svf_add_check_para(0, svf_buffer_index, i);
1192 field.num_bits = i;
1193 field.out_value = &svf_tdi_buffer[svf_buffer_index];
1194 field.in_value = (xxr_para_tmp->data_mask & XXR_TDO) ? &svf_tdi_buffer[svf_buffer_index] : NULL;
1195 if (!svf_nil) {
1196 /* NOTE: doesn't use SVF-specified state paths */
1197 jtag_add_plain_dr_scan(field.num_bits,
1198 field.out_value,
1199 field.in_value,
1200 svf_para.dr_end_state);
1203 svf_buffer_index += (i + 7) >> 3;
1204 } else if (command == SIR) {
1205 /* check buffer size first, reallocate if necessary */
1206 i = svf_para.hir_para.len + svf_para.sir_para.len +
1207 svf_para.tir_para.len;
1208 if ((svf_buffer_size - svf_buffer_index) < ((i + 7) >> 3)) {
1209 if (svf_realloc_buffers(svf_buffer_index + ((i + 7) >> 3)) != ERROR_OK) {
1210 LOG_ERROR("not enough memory");
1211 return ERROR_FAIL;
1215 /* assemble ir data */
1216 i = 0;
1217 buf_set_buf(svf_para.hir_para.tdi,
1219 &svf_tdi_buffer[svf_buffer_index],
1221 svf_para.hir_para.len);
1222 i += svf_para.hir_para.len;
1223 buf_set_buf(svf_para.sir_para.tdi,
1225 &svf_tdi_buffer[svf_buffer_index],
1227 svf_para.sir_para.len);
1228 i += svf_para.sir_para.len;
1229 buf_set_buf(svf_para.tir_para.tdi,
1231 &svf_tdi_buffer[svf_buffer_index],
1233 svf_para.tir_para.len);
1234 i += svf_para.tir_para.len;
1236 /* add check data */
1237 if (svf_para.sir_para.data_mask & XXR_TDO) {
1238 /* assemble dr mask data */
1239 i = 0;
1240 buf_set_buf(svf_para.hir_para.mask,
1242 &svf_mask_buffer[svf_buffer_index],
1244 svf_para.hir_para.len);
1245 i += svf_para.hir_para.len;
1246 buf_set_buf(svf_para.sir_para.mask,
1248 &svf_mask_buffer[svf_buffer_index],
1250 svf_para.sir_para.len);
1251 i += svf_para.sir_para.len;
1252 buf_set_buf(svf_para.tir_para.mask,
1254 &svf_mask_buffer[svf_buffer_index],
1256 svf_para.tir_para.len);
1258 /* assemble dr check data */
1259 i = 0;
1260 buf_set_buf(svf_para.hir_para.tdo,
1262 &svf_tdo_buffer[svf_buffer_index],
1264 svf_para.hir_para.len);
1265 i += svf_para.hir_para.len;
1266 buf_set_buf(svf_para.sir_para.tdo,
1268 &svf_tdo_buffer[svf_buffer_index],
1270 svf_para.sir_para.len);
1271 i += svf_para.sir_para.len;
1272 buf_set_buf(svf_para.tir_para.tdo,
1274 &svf_tdo_buffer[svf_buffer_index],
1276 svf_para.tir_para.len);
1277 i += svf_para.tir_para.len;
1279 svf_add_check_para(1, svf_buffer_index, i);
1280 } else
1281 svf_add_check_para(0, svf_buffer_index, i);
1282 field.num_bits = i;
1283 field.out_value = &svf_tdi_buffer[svf_buffer_index];
1284 field.in_value = (xxr_para_tmp->data_mask & XXR_TDO) ? &svf_tdi_buffer[svf_buffer_index] : NULL;
1285 if (!svf_nil) {
1286 /* NOTE: doesn't use SVF-specified state paths */
1287 jtag_add_plain_ir_scan(field.num_bits,
1288 field.out_value,
1289 field.in_value,
1290 svf_para.ir_end_state);
1293 svf_buffer_index += (i + 7) >> 3;
1295 break;
1296 case PIO:
1297 case PIOMAP:
1298 LOG_ERROR("PIO and PIOMAP are not supported");
1299 return ERROR_FAIL;
1300 case RUNTEST:
1301 /* RUNTEST [run_state] run_count run_clk [min_time SEC [MAXIMUM max_time
1302 * SEC]] [ENDSTATE end_state] */
1303 /* RUNTEST [run_state] min_time SEC [MAXIMUM max_time SEC] [ENDSTATE
1304 * end_state] */
1305 if ((num_of_argu < 3) || (num_of_argu > 11)) {
1306 LOG_ERROR("invalid parameter of %s", argus[0]);
1307 return ERROR_FAIL;
1309 /* init */
1310 run_count = 0;
1311 min_time = 0;
1312 i = 1;
1314 /* run_state */
1315 i_tmp = tap_state_by_name(argus[i]);
1316 if (i_tmp != TAP_INVALID) {
1317 if (svf_tap_state_is_stable(i_tmp)) {
1318 svf_para.runtest_run_state = i_tmp;
1320 /* When a run_state is specified, the new
1321 * run_state becomes the default end_state.
1323 svf_para.runtest_end_state = i_tmp;
1324 LOG_DEBUG("\trun_state = %s", tap_state_name(i_tmp));
1325 i++;
1326 } else {
1327 LOG_ERROR("%s: %s is not a stable state", argus[0], tap_state_name(i_tmp));
1328 return ERROR_FAIL;
1332 /* run_count run_clk */
1333 if (((i + 2) <= num_of_argu) && strcmp(argus[i + 1], "SEC")) {
1334 if (!strcmp(argus[i + 1], "TCK")) {
1335 /* clock source is TCK */
1336 run_count = atoi(argus[i]);
1337 LOG_DEBUG("\trun_count@TCK = %d", run_count);
1338 } else {
1339 LOG_ERROR("%s not supported for clock", argus[i + 1]);
1340 return ERROR_FAIL;
1342 i += 2;
1344 /* min_time SEC */
1345 if (((i + 2) <= num_of_argu) && !strcmp(argus[i + 1], "SEC")) {
1346 min_time = atof(argus[i]);
1347 LOG_DEBUG("\tmin_time = %fs", min_time);
1348 i += 2;
1350 /* MAXIMUM max_time SEC */
1351 if (((i + 3) <= num_of_argu) &&
1352 !strcmp(argus[i], "MAXIMUM") && !strcmp(argus[i + 2], "SEC")) {
1353 float max_time = 0;
1354 max_time = atof(argus[i + 1]);
1355 LOG_DEBUG("\tmax_time = %fs", max_time);
1356 i += 3;
1358 /* ENDSTATE end_state */
1359 if (((i + 2) <= num_of_argu) && !strcmp(argus[i], "ENDSTATE")) {
1360 i_tmp = tap_state_by_name(argus[i + 1]);
1362 if (svf_tap_state_is_stable(i_tmp)) {
1363 svf_para.runtest_end_state = i_tmp;
1364 LOG_DEBUG("\tend_state = %s", tap_state_name(i_tmp));
1365 } else {
1366 LOG_ERROR("%s: %s is not a stable state", argus[0], tap_state_name(i_tmp));
1367 return ERROR_FAIL;
1369 i += 2;
1372 /* all parameter should be parsed */
1373 if (i == num_of_argu) {
1374 #if 1
1375 /* FIXME handle statemove failures */
1376 uint32_t min_usec = 1000000 * min_time;
1378 /* enter into run_state if necessary */
1379 if (cmd_queue_cur_state != svf_para.runtest_run_state)
1380 svf_add_statemove(svf_para.runtest_run_state);
1382 /* add clocks and/or min wait */
1383 if (run_count > 0) {
1384 if (!svf_nil)
1385 jtag_add_clocks(run_count);
1388 if (min_usec > 0) {
1389 if (!svf_nil)
1390 jtag_add_sleep(min_usec);
1393 /* move to end_state if necessary */
1394 if (svf_para.runtest_end_state != svf_para.runtest_run_state)
1395 svf_add_statemove(svf_para.runtest_end_state);
1397 #else
1398 if (svf_para.runtest_run_state != TAP_IDLE) {
1399 LOG_ERROR("cannot runtest in %s state",
1400 tap_state_name(svf_para.runtest_run_state));
1401 return ERROR_FAIL;
1404 if (!svf_nil)
1405 jtag_add_runtest(run_count, svf_para.runtest_end_state);
1406 #endif
1407 } else {
1408 LOG_ERROR("fail to parse parameter of RUNTEST, %d out of %d is parsed",
1410 num_of_argu);
1411 return ERROR_FAIL;
1413 break;
1414 case STATE:
1415 /* STATE [pathstate1 [pathstate2 ...[pathstaten]]] stable_state */
1416 if (num_of_argu < 2) {
1417 LOG_ERROR("invalid parameter of %s", argus[0]);
1418 return ERROR_FAIL;
1420 if (num_of_argu > 2) {
1421 /* STATE pathstate1 ... stable_state */
1422 path = malloc((num_of_argu - 1) * sizeof(tap_state_t));
1423 if (!path) {
1424 LOG_ERROR("not enough memory");
1425 return ERROR_FAIL;
1427 num_of_argu--; /* num of path */
1428 i_tmp = 1; /* path is from parameter 1 */
1429 for (i = 0; i < num_of_argu; i++, i_tmp++) {
1430 path[i] = tap_state_by_name(argus[i_tmp]);
1431 if (path[i] == TAP_INVALID) {
1432 LOG_ERROR("%s: %s is not a valid state", argus[0], argus[i_tmp]);
1433 free(path);
1434 return ERROR_FAIL;
1436 /* OpenOCD refuses paths containing TAP_RESET */
1437 if (path[i] == TAP_RESET) {
1438 /* FIXME last state MUST be stable! */
1439 if (i > 0) {
1440 if (!svf_nil)
1441 jtag_add_pathmove(i, path);
1443 if (!svf_nil)
1444 jtag_add_tlr();
1445 num_of_argu -= i + 1;
1446 i = -1;
1449 if (num_of_argu > 0) {
1450 /* execute last path if necessary */
1451 if (svf_tap_state_is_stable(path[num_of_argu - 1])) {
1452 /* last state MUST be stable state */
1453 if (!svf_nil)
1454 jtag_add_pathmove(num_of_argu, path);
1455 LOG_DEBUG("\tmove to %s by path_move",
1456 tap_state_name(path[num_of_argu - 1]));
1457 } else {
1458 LOG_ERROR("%s: %s is not a stable state",
1459 argus[0],
1460 tap_state_name(path[num_of_argu - 1]));
1461 free(path);
1462 return ERROR_FAIL;
1466 free(path);
1467 path = NULL;
1468 } else {
1469 /* STATE stable_state */
1470 state = tap_state_by_name(argus[1]);
1471 if (svf_tap_state_is_stable(state)) {
1472 LOG_DEBUG("\tmove to %s by svf_add_statemove",
1473 tap_state_name(state));
1474 /* FIXME handle statemove failures */
1475 svf_add_statemove(state);
1476 } else {
1477 LOG_ERROR("%s: %s is not a stable state",
1478 argus[0], tap_state_name(state));
1479 return ERROR_FAIL;
1482 break;
1483 case TRST:
1484 /* TRST trst_mode */
1485 if (num_of_argu != 2) {
1486 LOG_ERROR("invalid parameter of %s", argus[0]);
1487 return ERROR_FAIL;
1489 if (svf_para.trst_mode != TRST_ABSENT) {
1490 if (svf_execute_tap() != ERROR_OK)
1491 return ERROR_FAIL;
1492 i_tmp = svf_find_string_in_array(argus[1],
1493 (char **)svf_trst_mode_name,
1494 ARRAY_SIZE(svf_trst_mode_name));
1495 switch (i_tmp) {
1496 case TRST_ON:
1497 if (!svf_nil)
1498 jtag_add_reset(1, 0);
1499 break;
1500 case TRST_Z:
1501 case TRST_OFF:
1502 if (!svf_nil)
1503 jtag_add_reset(0, 0);
1504 break;
1505 case TRST_ABSENT:
1506 break;
1507 default:
1508 LOG_ERROR("unknown TRST mode: %s", argus[1]);
1509 return ERROR_FAIL;
1511 svf_para.trst_mode = i_tmp;
1512 LOG_DEBUG("\ttrst_mode = %s", svf_trst_mode_name[svf_para.trst_mode]);
1513 } else {
1514 LOG_ERROR("can not accept TRST command if trst_mode is ABSENT");
1515 return ERROR_FAIL;
1517 break;
1518 default:
1519 LOG_ERROR("invalid svf command: %s", argus[0]);
1520 return ERROR_FAIL;
1523 if (!svf_quiet) {
1524 if (padding_command_skipped)
1525 LOG_USER("(Above Padding command skipped, as per -tap argument)");
1528 if (debug_level >= LOG_LVL_DEBUG) {
1529 /* for convenient debugging, execute tap if possible */
1530 if ((svf_buffer_index > 0) &&
1531 (((command != STATE) && (command != RUNTEST)) ||
1532 ((command == STATE) && (num_of_argu == 2)))) {
1533 if (svf_execute_tap() != ERROR_OK)
1534 return ERROR_FAIL;
1536 /* output debug info */
1537 if ((command == SIR) || (command == SDR))
1538 SVF_BUF_LOG(DEBUG, svf_tdi_buffer, svf_check_tdo_para[0].bit_len, "TDO read");
1540 } else {
1541 /* for fast executing, execute tap if necessary */
1542 /* half of the buffer is for the next command */
1543 if (((svf_buffer_index >= SVF_MAX_BUFFER_SIZE_TO_COMMIT) ||
1544 (svf_check_tdo_para_index >= SVF_CHECK_TDO_PARA_SIZE / 2)) &&
1545 (((command != STATE) && (command != RUNTEST)) ||
1546 ((command == STATE) && (num_of_argu == 2))))
1547 return svf_execute_tap();
1550 return ERROR_OK;
1553 static const struct command_registration svf_command_handlers[] = {
1555 .name = "svf",
1556 .handler = handle_svf_command,
1557 .mode = COMMAND_EXEC,
1558 .help = "Runs a SVF file.",
1559 .usage = "[-tap device.tap] <file> [quiet] [nil] [progress] [ignore_error]",
1561 COMMAND_REGISTRATION_DONE
1564 int svf_register_commands(struct command_context *cmd_ctx)
1566 return register_commands(cmd_ctx, NULL, svf_command_handlers);