tcl: add ASUS RT-N66U config
[openocd.git] / src / svf / svf.c
blobac7c2c68d01256cdedee8a412018bcd2bfc20795
1 /***************************************************************************
2 * Copyright (C) 2009 by Simon Qian *
3 * SimonQian@SimonQian.com *
4 * *
5 * This program is free software; you can redistribute it and/or modify *
6 * it under the terms of the GNU General Public License as published by *
7 * the Free Software Foundation; either version 2 of the License, or *
8 * (at your option) any later version. *
9 * *
10 * This program is distributed in the hope that it will be useful, *
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
13 * GNU General Public License for more details. *
14 * *
15 * You should have received a copy of the GNU General Public License *
16 * along with this program; if not, write to the *
17 * Free Software Foundation, Inc., *
18 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
19 ***************************************************************************/
21 /* The specification for SVF is available here:
22 * http://www.asset-intertech.com/support/svf.pdf
23 * Below, this document is refered to as the "SVF spec".
25 * The specification for XSVF is available here:
26 * http://www.xilinx.com/support/documentation/application_notes/xapp503.pdf
27 * Below, this document is refered to as the "XSVF spec".
30 #ifdef HAVE_CONFIG_H
31 #include "config.h"
32 #endif
34 #include <jtag/jtag.h>
35 #include "svf.h"
36 #include <helper/time_support.h>
38 /* SVF command */
39 enum svf_command {
40 ENDDR,
41 ENDIR,
42 FREQUENCY,
43 HDR,
44 HIR,
45 PIO,
46 PIOMAP,
47 RUNTEST,
48 SDR,
49 SIR,
50 STATE,
51 TDR,
52 TIR,
53 TRST,
56 static const char *svf_command_name[14] = {
57 "ENDDR",
58 "ENDIR",
59 "FREQUENCY",
60 "HDR",
61 "HIR",
62 "PIO",
63 "PIOMAP",
64 "RUNTEST",
65 "SDR",
66 "SIR",
67 "STATE",
68 "TDR",
69 "TIR",
70 "TRST"
73 enum trst_mode {
74 TRST_ON,
75 TRST_OFF,
76 TRST_Z,
77 TRST_ABSENT
80 static const char *svf_trst_mode_name[4] = {
81 "ON",
82 "OFF",
83 "Z",
84 "ABSENT"
87 struct svf_statemove {
88 tap_state_t from;
89 tap_state_t to;
90 uint32_t num_of_moves;
91 tap_state_t paths[8];
95 * These paths are from the SVF specification for the STATE command, to be
96 * used when the STATE command only includes the final state. The first
97 * element of the path is the "from" (current) state, and the last one is
98 * the "to" (target) state.
100 * All specified paths are the shortest ones in the JTAG spec, and are thus
101 * not (!!) exact matches for the paths used elsewhere in OpenOCD. Note
102 * that PAUSE-to-PAUSE transitions all go through UPDATE and then CAPTURE,
103 * which has specific effects on the various registers; they are not NOPs.
105 * Paths to RESET are disabled here. As elsewhere in OpenOCD, and in XSVF
106 * and many SVF implementations, we don't want to risk missing that state.
107 * To get to RESET, always we ignore the current state.
109 static const struct svf_statemove svf_statemoves[] = {
110 /* from to num_of_moves, paths[8] */
111 /* {TAP_RESET, TAP_RESET, 1, {TAP_RESET}}, */
112 {TAP_RESET, TAP_IDLE, 2, {TAP_RESET, TAP_IDLE} },
113 {TAP_RESET, TAP_DRPAUSE, 6, {TAP_RESET, TAP_IDLE, TAP_DRSELECT,
114 TAP_DRCAPTURE, TAP_DREXIT1, TAP_DRPAUSE} },
115 {TAP_RESET, TAP_IRPAUSE, 7, {TAP_RESET, TAP_IDLE, TAP_DRSELECT,
116 TAP_IRSELECT, TAP_IRCAPTURE,
117 TAP_IREXIT1, TAP_IRPAUSE} },
119 /* {TAP_IDLE, TAP_RESET, 4, {TAP_IDLE,
120 * TAP_DRSELECT, TAP_IRSELECT, TAP_RESET}}, */
121 {TAP_IDLE, TAP_IDLE, 1, {TAP_IDLE} },
122 {TAP_IDLE, TAP_DRPAUSE, 5, {TAP_IDLE, TAP_DRSELECT, TAP_DRCAPTURE,
123 TAP_DREXIT1, TAP_DRPAUSE} },
124 {TAP_IDLE, TAP_IRPAUSE, 6, {TAP_IDLE, TAP_DRSELECT, TAP_IRSELECT,
125 TAP_IRCAPTURE, TAP_IREXIT1, TAP_IRPAUSE} },
127 /* {TAP_DRPAUSE, TAP_RESET, 6, {TAP_DRPAUSE,
128 * TAP_DREXIT2, TAP_DRUPDATE, TAP_DRSELECT, TAP_IRSELECT, TAP_RESET}}, */
129 {TAP_DRPAUSE, TAP_IDLE, 4, {TAP_DRPAUSE, TAP_DREXIT2, TAP_DRUPDATE,
130 TAP_IDLE} },
131 {TAP_DRPAUSE, TAP_DRPAUSE, 7, {TAP_DRPAUSE, TAP_DREXIT2, TAP_DRUPDATE,
132 TAP_DRSELECT, TAP_DRCAPTURE,
133 TAP_DREXIT1, TAP_DRPAUSE} },
134 {TAP_DRPAUSE, TAP_IRPAUSE, 8, {TAP_DRPAUSE, TAP_DREXIT2, TAP_DRUPDATE,
135 TAP_DRSELECT, TAP_IRSELECT,
136 TAP_IRCAPTURE, TAP_IREXIT1, TAP_IRPAUSE} },
138 /* {TAP_IRPAUSE, TAP_RESET, 6, {TAP_IRPAUSE,
139 * TAP_IREXIT2, TAP_IRUPDATE, TAP_DRSELECT, TAP_IRSELECT, TAP_RESET}}, */
140 {TAP_IRPAUSE, TAP_IDLE, 4, {TAP_IRPAUSE, TAP_IREXIT2, TAP_IRUPDATE,
141 TAP_IDLE} },
142 {TAP_IRPAUSE, TAP_DRPAUSE, 7, {TAP_IRPAUSE, TAP_IREXIT2, TAP_IRUPDATE,
143 TAP_DRSELECT, TAP_DRCAPTURE,
144 TAP_DREXIT1, TAP_DRPAUSE} },
145 {TAP_IRPAUSE, TAP_IRPAUSE, 8, {TAP_IRPAUSE, TAP_IREXIT2, TAP_IRUPDATE,
146 TAP_DRSELECT, TAP_IRSELECT,
147 TAP_IRCAPTURE, TAP_IREXIT1, TAP_IRPAUSE} }
150 #define XXR_TDI (1 << 0)
151 #define XXR_TDO (1 << 1)
152 #define XXR_MASK (1 << 2)
153 #define XXR_SMASK (1 << 3)
154 struct svf_xxr_para {
155 int len;
156 int data_mask;
157 uint8_t *tdi;
158 uint8_t *tdo;
159 uint8_t *mask;
160 uint8_t *smask;
163 struct svf_para {
164 float frequency;
165 tap_state_t ir_end_state;
166 tap_state_t dr_end_state;
167 tap_state_t runtest_run_state;
168 tap_state_t runtest_end_state;
169 enum trst_mode trst_mode;
171 struct svf_xxr_para hir_para;
172 struct svf_xxr_para hdr_para;
173 struct svf_xxr_para tir_para;
174 struct svf_xxr_para tdr_para;
175 struct svf_xxr_para sir_para;
176 struct svf_xxr_para sdr_para;
179 static struct svf_para svf_para;
180 static const struct svf_para svf_para_init = {
181 /* frequency, ir_end_state, dr_end_state, runtest_run_state, runtest_end_state, trst_mode */
182 0, TAP_IDLE, TAP_IDLE, TAP_IDLE, TAP_IDLE, TRST_Z,
183 /* hir_para */
184 /* {len, data_mask, tdi, tdo, mask, smask}, */
185 {0, 0, NULL, NULL, NULL, NULL},
186 /* hdr_para */
187 /* {len, data_mask, tdi, tdo, mask, smask}, */
188 {0, 0, NULL, NULL, NULL, NULL},
189 /* tir_para */
190 /* {len, data_mask, tdi, tdo, mask, smask}, */
191 {0, 0, NULL, NULL, NULL, NULL},
192 /* tdr_para */
193 /* {len, data_mask, tdi, tdo, mask, smask}, */
194 {0, 0, NULL, NULL, NULL, NULL},
195 /* sir_para */
196 /* {len, data_mask, tdi, tdo, mask, smask}, */
197 {0, 0, NULL, NULL, NULL, NULL},
198 /* sdr_para */
199 /* {len, data_mask, tdi, tdo, mask, smask}, */
200 {0, 0, NULL, NULL, NULL, NULL},
203 struct svf_check_tdo_para {
204 int line_num; /* used to record line number of the check operation */
205 /* so more information could be printed */
206 int enabled; /* check is enabled or not */
207 int buffer_offset; /* buffer_offset to buffers */
208 int bit_len; /* bit length to check */
211 #define SVF_CHECK_TDO_PARA_SIZE 1024
212 static struct svf_check_tdo_para *svf_check_tdo_para;
213 static int svf_check_tdo_para_index;
215 static int svf_read_command_from_file(FILE *fd);
216 static int svf_check_tdo(void);
217 static int svf_add_check_para(uint8_t enabled, int buffer_offset, int bit_len);
218 static int svf_run_command(struct command_context *cmd_ctx, char *cmd_str);
220 static FILE *svf_fd;
221 static char *svf_read_line;
222 static size_t svf_read_line_size;
223 static char *svf_command_buffer;
224 static size_t svf_command_buffer_size;
225 static int svf_line_number = 1;
226 static int svf_getline(char **lineptr, size_t *n, FILE *stream);
228 #define SVF_MAX_BUFFER_SIZE_TO_COMMIT (1024 * 1024)
229 static uint8_t *svf_tdi_buffer, *svf_tdo_buffer, *svf_mask_buffer;
230 static int svf_buffer_index, svf_buffer_size ;
231 static int svf_quiet;
232 static int svf_nil;
234 /* Targetting particular tap */
235 static int svf_tap_is_specified;
236 static int svf_set_padding(struct svf_xxr_para *para, int len, unsigned char tdi);
238 /* Progress Indicator */
239 static int svf_progress_enabled;
240 static long svf_total_lines;
241 static int svf_percentage;
242 static int svf_last_printed_percentage = -1;
245 * macro is used to print the svf hex buffer at desired debug level
246 * DEBUG, INFO, ERROR, USER
248 #define SVF_BUF_LOG(_lvl, _buf, _nbits, _desc) \
249 svf_hexbuf_print(LOG_LVL_##_lvl , __FILE__, __LINE__, __func__, _buf, _nbits, _desc)
251 static void svf_hexbuf_print(int dbg_lvl, const char *file, unsigned line,
252 const char *function, const uint8_t *buf,
253 int bit_len, const char *desc)
255 int j, len = 0;
256 int byte_len = DIV_ROUND_UP(bit_len, 8);
257 int msbits = bit_len % 8;
259 /* allocate 2 bytes per hex digit */
260 char *prbuf = malloc((byte_len * 2) + 1);
261 if (!prbuf)
262 return;
264 /* print correct number of bytes, mask excess bits where applicable */
265 uint8_t msb = buf[byte_len - 1] & (msbits ? (1 << msbits) - 1 : 0xff);
266 len = sprintf(prbuf, msbits <= 4 ? "0x%01"PRIx8 : "0x%02"PRIx8, msb);
267 for (j = byte_len - 2; j >= 0; j--)
268 len += sprintf(prbuf + len, "%02"PRIx8, buf[j]);
270 log_printf_lf(dbg_lvl, file, line, function, "%8s = %s", desc ? desc : " ", prbuf);
272 free(prbuf);
275 static int svf_realloc_buffers(size_t len)
277 void *ptr;
279 ptr = realloc(svf_tdi_buffer, len);
280 if (!ptr)
281 return ERROR_FAIL;
282 svf_tdi_buffer = ptr;
284 ptr = realloc(svf_tdo_buffer, len);
285 if (!ptr)
286 return ERROR_FAIL;
287 svf_tdo_buffer = ptr;
289 ptr = realloc(svf_mask_buffer, len);
290 if (!ptr)
291 return ERROR_FAIL;
292 svf_mask_buffer = ptr;
294 svf_buffer_size = len;
296 return ERROR_OK;
299 static void svf_free_xxd_para(struct svf_xxr_para *para)
301 if (NULL != para) {
302 if (para->tdi != NULL) {
303 free(para->tdi);
304 para->tdi = NULL;
306 if (para->tdo != NULL) {
307 free(para->tdo);
308 para->tdo = NULL;
310 if (para->mask != NULL) {
311 free(para->mask);
312 para->mask = NULL;
314 if (para->smask != NULL) {
315 free(para->smask);
316 para->smask = NULL;
321 int svf_add_statemove(tap_state_t state_to)
323 tap_state_t state_from = cmd_queue_cur_state;
324 unsigned index_var;
326 /* when resetting, be paranoid and ignore current state */
327 if (state_to == TAP_RESET) {
328 if (svf_nil)
329 return ERROR_OK;
331 jtag_add_tlr();
332 return ERROR_OK;
335 for (index_var = 0; index_var < ARRAY_SIZE(svf_statemoves); index_var++) {
336 if ((svf_statemoves[index_var].from == state_from)
337 && (svf_statemoves[index_var].to == state_to)) {
338 if (svf_nil)
339 continue;
340 /* recorded path includes current state ... avoid
341 *extra TCKs! */
342 if (svf_statemoves[index_var].num_of_moves > 1)
343 jtag_add_pathmove(svf_statemoves[index_var].num_of_moves - 1,
344 svf_statemoves[index_var].paths + 1);
345 else
346 jtag_add_pathmove(svf_statemoves[index_var].num_of_moves,
347 svf_statemoves[index_var].paths);
348 return ERROR_OK;
351 LOG_ERROR("SVF: can not move to %s", tap_state_name(state_to));
352 return ERROR_FAIL;
355 COMMAND_HANDLER(handle_svf_command)
357 #define SVF_MIN_NUM_OF_OPTIONS 1
358 #define SVF_MAX_NUM_OF_OPTIONS 5
359 int command_num = 0;
360 int ret = ERROR_OK;
361 long long time_measure_ms;
362 int time_measure_s, time_measure_m;
364 /* use NULL to indicate a "plain" svf file which accounts for
365 * any additional devices in the scan chain, otherwise the device
366 * that should be affected
368 struct jtag_tap *tap = NULL;
370 if ((CMD_ARGC < SVF_MIN_NUM_OF_OPTIONS) || (CMD_ARGC > SVF_MAX_NUM_OF_OPTIONS))
371 return ERROR_COMMAND_SYNTAX_ERROR;
373 /* parse command line */
374 svf_quiet = 0;
375 svf_nil = 0;
376 for (unsigned int i = 0; i < CMD_ARGC; i++) {
377 if (strcmp(CMD_ARGV[i], "-tap") == 0) {
378 tap = jtag_tap_by_string(CMD_ARGV[i+1]);
379 if (!tap) {
380 command_print(CMD_CTX, "Tap: %s unknown", CMD_ARGV[i+1]);
381 return ERROR_FAIL;
383 i++;
384 } else if ((strcmp(CMD_ARGV[i],
385 "quiet") == 0) || (strcmp(CMD_ARGV[i], "-quiet") == 0))
386 svf_quiet = 1;
387 else if ((strcmp(CMD_ARGV[i], "nil") == 0) || (strcmp(CMD_ARGV[i], "-nil") == 0))
388 svf_nil = 1;
389 else if ((strcmp(CMD_ARGV[i],
390 "progress") == 0) || (strcmp(CMD_ARGV[i], "-progress") == 0))
391 svf_progress_enabled = 1;
392 else {
393 svf_fd = fopen(CMD_ARGV[i], "r");
394 if (svf_fd == NULL) {
395 int err = errno;
396 command_print(CMD_CTX, "open(\"%s\"): %s", CMD_ARGV[i], strerror(err));
397 /* no need to free anything now */
398 return ERROR_COMMAND_SYNTAX_ERROR;
399 } else
400 LOG_USER("svf processing file: \"%s\"", CMD_ARGV[i]);
404 if (svf_fd == NULL)
405 return ERROR_COMMAND_SYNTAX_ERROR;
407 /* get time */
408 time_measure_ms = timeval_ms();
410 /* init */
411 svf_line_number = 1;
412 svf_command_buffer_size = 0;
414 svf_check_tdo_para_index = 0;
415 svf_check_tdo_para = malloc(sizeof(struct svf_check_tdo_para) * SVF_CHECK_TDO_PARA_SIZE);
416 if (NULL == svf_check_tdo_para) {
417 LOG_ERROR("not enough memory");
418 ret = ERROR_FAIL;
419 goto free_all;
422 svf_buffer_index = 0;
423 /* double the buffer size */
424 /* in case current command cannot be committed, and next command is a bit scan command */
425 /* here is 32K bits for this big scan command, it should be enough */
426 /* buffer will be reallocated if buffer size is not enough */
427 if (svf_realloc_buffers(2 * SVF_MAX_BUFFER_SIZE_TO_COMMIT) != ERROR_OK) {
428 ret = ERROR_FAIL;
429 goto free_all;
432 memcpy(&svf_para, &svf_para_init, sizeof(svf_para));
434 if (!svf_nil) {
435 /* TAP_RESET */
436 jtag_add_tlr();
439 if (tap) {
440 /* Tap is specified, set header/trailer paddings */
441 int header_ir_len = 0, header_dr_len = 0, trailer_ir_len = 0, trailer_dr_len = 0;
442 struct jtag_tap *check_tap;
444 svf_tap_is_specified = 1;
446 for (check_tap = jtag_all_taps(); check_tap; check_tap = check_tap->next_tap) {
447 if (check_tap->abs_chain_position < tap->abs_chain_position) {
448 /* Header */
449 header_ir_len += check_tap->ir_length;
450 header_dr_len++;
451 } else if (check_tap->abs_chain_position > tap->abs_chain_position) {
452 /* Trailer */
453 trailer_ir_len += check_tap->ir_length;
454 trailer_dr_len++;
458 /* HDR %d TDI (0) */
459 if (ERROR_OK != svf_set_padding(&svf_para.hdr_para, header_dr_len, 0)) {
460 LOG_ERROR("failed to set data header");
461 return ERROR_FAIL;
464 /* HIR %d TDI (0xFF) */
465 if (ERROR_OK != svf_set_padding(&svf_para.hir_para, header_ir_len, 0xFF)) {
466 LOG_ERROR("failed to set instruction header");
467 return ERROR_FAIL;
470 /* TDR %d TDI (0) */
471 if (ERROR_OK != svf_set_padding(&svf_para.tdr_para, trailer_dr_len, 0)) {
472 LOG_ERROR("failed to set data trailer");
473 return ERROR_FAIL;
476 /* TIR %d TDI (0xFF) */
477 if (ERROR_OK != svf_set_padding(&svf_para.tir_para, trailer_ir_len, 0xFF)) {
478 LOG_ERROR("failed to set instruction trailer");
479 return ERROR_FAIL;
483 if (svf_progress_enabled) {
484 /* Count total lines in file. */
485 while (!feof(svf_fd)) {
486 svf_getline(&svf_command_buffer, &svf_command_buffer_size, svf_fd);
487 svf_total_lines++;
489 rewind(svf_fd);
491 while (ERROR_OK == svf_read_command_from_file(svf_fd)) {
492 /* Log Output */
493 if (svf_quiet) {
494 if (svf_progress_enabled) {
495 svf_percentage = ((svf_line_number * 20) / svf_total_lines) * 5;
496 if (svf_last_printed_percentage != svf_percentage) {
497 LOG_USER_N("\r%d%% ", svf_percentage);
498 svf_last_printed_percentage = svf_percentage;
501 } else {
502 if (svf_progress_enabled) {
503 svf_percentage = ((svf_line_number * 20) / svf_total_lines) * 5;
504 LOG_USER_N("%3d%% %s", svf_percentage, svf_read_line);
505 } else
506 LOG_USER_N("%s", svf_read_line);
508 /* Run Command */
509 if (ERROR_OK != svf_run_command(CMD_CTX, svf_command_buffer)) {
510 LOG_ERROR("fail to run command at line %d", svf_line_number);
511 ret = ERROR_FAIL;
512 break;
514 command_num++;
517 if ((!svf_nil) && (ERROR_OK != jtag_execute_queue()))
518 ret = ERROR_FAIL;
519 else if (ERROR_OK != svf_check_tdo())
520 ret = ERROR_FAIL;
522 /* print time */
523 time_measure_ms = timeval_ms() - time_measure_ms;
524 time_measure_s = time_measure_ms / 1000;
525 time_measure_ms %= 1000;
526 time_measure_m = time_measure_s / 60;
527 time_measure_s %= 60;
528 if (time_measure_ms < 1000)
529 command_print(CMD_CTX,
530 "\r\nTime used: %dm%ds%lldms ",
531 time_measure_m,
532 time_measure_s,
533 time_measure_ms);
535 free_all:
537 fclose(svf_fd);
538 svf_fd = 0;
540 /* free buffers */
541 if (svf_command_buffer) {
542 free(svf_command_buffer);
543 svf_command_buffer = NULL;
544 svf_command_buffer_size = 0;
546 if (svf_check_tdo_para) {
547 free(svf_check_tdo_para);
548 svf_check_tdo_para = NULL;
549 svf_check_tdo_para_index = 0;
551 if (svf_tdi_buffer) {
552 free(svf_tdi_buffer);
553 svf_tdi_buffer = NULL;
555 if (svf_tdo_buffer) {
556 free(svf_tdo_buffer);
557 svf_tdo_buffer = NULL;
559 if (svf_mask_buffer) {
560 free(svf_mask_buffer);
561 svf_mask_buffer = NULL;
563 svf_buffer_index = 0;
564 svf_buffer_size = 0;
566 svf_free_xxd_para(&svf_para.hdr_para);
567 svf_free_xxd_para(&svf_para.hir_para);
568 svf_free_xxd_para(&svf_para.tdr_para);
569 svf_free_xxd_para(&svf_para.tir_para);
570 svf_free_xxd_para(&svf_para.sdr_para);
571 svf_free_xxd_para(&svf_para.sir_para);
573 if (ERROR_OK == ret)
574 command_print(CMD_CTX,
575 "svf file programmed successfully for %d commands",
576 command_num);
577 else
578 command_print(CMD_CTX, "svf file programmed failed");
580 return ret;
583 static int svf_getline(char **lineptr, size_t *n, FILE *stream)
585 #define MIN_CHUNK 16 /* Buffer is increased by this size each time as required */
586 size_t i = 0;
588 if (*lineptr == NULL) {
589 *n = MIN_CHUNK;
590 *lineptr = malloc(*n);
591 if (!*lineptr)
592 return -1;
595 (*lineptr)[0] = fgetc(stream);
596 while ((*lineptr)[i] != '\n') {
597 (*lineptr)[++i] = fgetc(stream);
598 if (feof(stream)) {
599 (*lineptr)[0] = 0;
600 return -1;
602 if ((i + 2) > *n) {
603 *n += MIN_CHUNK;
604 *lineptr = realloc(*lineptr, *n);
608 (*lineptr)[++i] = 0;
610 return sizeof(*lineptr);
613 #define SVFP_CMD_INC_CNT 1024
614 static int svf_read_command_from_file(FILE *fd)
616 unsigned char ch;
617 int i = 0;
618 size_t cmd_pos = 0;
619 int cmd_ok = 0, slash = 0;
621 if (svf_getline(&svf_read_line, &svf_read_line_size, svf_fd) <= 0)
622 return ERROR_FAIL;
623 svf_line_number++;
624 ch = svf_read_line[0];
625 while (!cmd_ok && (ch != 0)) {
626 switch (ch) {
627 case '!':
628 slash = 0;
629 if (svf_getline(&svf_read_line, &svf_read_line_size, svf_fd) <= 0)
630 return ERROR_FAIL;
631 svf_line_number++;
632 i = -1;
633 break;
634 case '/':
635 if (++slash == 2) {
636 slash = 0;
637 if (svf_getline(&svf_read_line, &svf_read_line_size,
638 svf_fd) <= 0)
639 return ERROR_FAIL;
640 svf_line_number++;
641 i = -1;
643 break;
644 case ';':
645 slash = 0;
646 cmd_ok = 1;
647 break;
648 case '\n':
649 svf_line_number++;
650 if (svf_getline(&svf_read_line, &svf_read_line_size, svf_fd) <= 0)
651 return ERROR_FAIL;
652 i = -1;
653 case '\r':
654 slash = 0;
655 /* Don't save '\r' and '\n' if no data is parsed */
656 if (!cmd_pos)
657 break;
658 default:
659 /* The parsing code currently expects a space
660 * before parentheses -- "TDI (123)". Also a
661 * space afterwards -- "TDI (123) TDO(456)".
662 * But such spaces are optional... instead of
663 * parser updates, cope with that by adding the
664 * spaces as needed.
666 * Ensure there are 3 bytes available, for:
667 * - current character
668 * - added space.
669 * - terminating NUL ('\0')
671 if (cmd_pos + 3 > svf_command_buffer_size) {
672 svf_command_buffer = realloc(svf_command_buffer, cmd_pos + 3);
673 svf_command_buffer_size = cmd_pos + 3;
674 if (svf_command_buffer == NULL) {
675 LOG_ERROR("not enough memory");
676 return ERROR_FAIL;
680 /* insert a space before '(' */
681 if ('(' == ch)
682 svf_command_buffer[cmd_pos++] = ' ';
684 svf_command_buffer[cmd_pos++] = (char)toupper(ch);
686 /* insert a space after ')' */
687 if (')' == ch)
688 svf_command_buffer[cmd_pos++] = ' ';
689 break;
691 ch = svf_read_line[++i];
694 if (cmd_ok) {
695 svf_command_buffer[cmd_pos] = '\0';
696 return ERROR_OK;
697 } else
698 return ERROR_FAIL;
701 static int svf_parse_cmd_string(char *str, int len, char **argus, int *num_of_argu)
703 int pos = 0, num = 0, space_found = 1, in_bracket = 0;
705 while (pos < len) {
706 switch (str[pos]) {
707 case '!':
708 case '/':
709 LOG_ERROR("fail to parse svf command");
710 return ERROR_FAIL;
711 case '(':
712 in_bracket = 1;
713 goto parse_char;
714 case ')':
715 in_bracket = 0;
716 goto parse_char;
717 default:
718 parse_char:
719 if (!in_bracket && isspace((int) str[pos])) {
720 space_found = 1;
721 str[pos] = '\0';
722 } else if (space_found) {
723 argus[num++] = &str[pos];
724 space_found = 0;
726 break;
728 pos++;
731 *num_of_argu = num;
733 return ERROR_OK;
736 bool svf_tap_state_is_stable(tap_state_t state)
738 return (TAP_RESET == state) || (TAP_IDLE == state)
739 || (TAP_DRPAUSE == state) || (TAP_IRPAUSE == state);
742 static int svf_find_string_in_array(char *str, char **strs, int num_of_element)
744 int i;
746 for (i = 0; i < num_of_element; i++) {
747 if (!strcmp(str, strs[i]))
748 return i;
750 return 0xFF;
753 static int svf_adjust_array_length(uint8_t **arr, int orig_bit_len, int new_bit_len)
755 int new_byte_len = (new_bit_len + 7) >> 3;
757 if ((NULL == *arr) || (((orig_bit_len + 7) >> 3) < ((new_bit_len + 7) >> 3))) {
758 if (*arr != NULL) {
759 free(*arr);
760 *arr = NULL;
762 *arr = malloc(new_byte_len);
763 if (NULL == *arr) {
764 LOG_ERROR("not enough memory");
765 return ERROR_FAIL;
767 memset(*arr, 0, new_byte_len);
769 return ERROR_OK;
772 static int svf_set_padding(struct svf_xxr_para *para, int len, unsigned char tdi)
774 int error = ERROR_OK;
775 error |= svf_adjust_array_length(&para->tdi, para->len, len);
776 memset(para->tdi, tdi, (len + 7) >> 3);
777 error |= svf_adjust_array_length(&para->tdo, para->len, len);
778 error |= svf_adjust_array_length(&para->mask, para->len, len);
779 para->len = len;
780 para->data_mask = XXR_TDI;
782 return error;
785 static int svf_copy_hexstring_to_binary(char *str, uint8_t **bin, int orig_bit_len, int bit_len)
787 int i, str_len = strlen(str), str_hbyte_len = (bit_len + 3) >> 2;
788 uint8_t ch = 0;
790 if (ERROR_OK != svf_adjust_array_length(bin, orig_bit_len, bit_len)) {
791 LOG_ERROR("fail to adjust length of array");
792 return ERROR_FAIL;
795 /* fill from LSB (end of str) to MSB (beginning of str) */
796 for (i = 0; i < str_hbyte_len; i++) {
797 ch = 0;
798 while (str_len > 0) {
799 ch = str[--str_len];
801 /* Skip whitespace. The SVF specification (rev E) is
802 * deficient in terms of basic lexical issues like
803 * where whitespace is allowed. Long bitstrings may
804 * require line ends for correctness, since there is
805 * a hard limit on line length.
807 if (!isspace(ch)) {
808 if ((ch >= '0') && (ch <= '9')) {
809 ch = ch - '0';
810 break;
811 } else if ((ch >= 'A') && (ch <= 'F')) {
812 ch = ch - 'A' + 10;
813 break;
814 } else {
815 LOG_ERROR("invalid hex string");
816 return ERROR_FAIL;
820 ch = 0;
823 /* write bin */
824 if (i % 2) {
825 /* MSB */
826 (*bin)[i / 2] |= ch << 4;
827 } else {
828 /* LSB */
829 (*bin)[i / 2] = 0;
830 (*bin)[i / 2] |= ch;
834 /* consume optional leading '0' MSBs or whitespace */
835 while (str_len > 0 && ((str[str_len - 1] == '0')
836 || isspace((int) str[str_len - 1])))
837 str_len--;
839 /* check validity: we must have consumed everything */
840 if (str_len > 0 || (ch & ~((2 << ((bit_len - 1) % 4)) - 1)) != 0) {
841 LOG_ERROR("value execeeds length");
842 return ERROR_FAIL;
845 return ERROR_OK;
848 static int svf_check_tdo(void)
850 int i, len, index_var;
852 for (i = 0; i < svf_check_tdo_para_index; i++) {
853 index_var = svf_check_tdo_para[i].buffer_offset;
854 len = svf_check_tdo_para[i].bit_len;
855 if ((svf_check_tdo_para[i].enabled)
856 && buf_cmp_mask(&svf_tdi_buffer[index_var], &svf_tdo_buffer[index_var],
857 &svf_mask_buffer[index_var], len)) {
858 LOG_ERROR("tdo check error at line %d",
859 svf_check_tdo_para[i].line_num);
860 SVF_BUF_LOG(ERROR, &svf_tdi_buffer[index_var], len, "READ");
861 SVF_BUF_LOG(ERROR, &svf_tdo_buffer[index_var], len, "WANT");
862 SVF_BUF_LOG(ERROR, &svf_mask_buffer[index_var], len, "MASK");
863 return ERROR_FAIL;
866 svf_check_tdo_para_index = 0;
868 return ERROR_OK;
871 static int svf_add_check_para(uint8_t enabled, int buffer_offset, int bit_len)
873 if (svf_check_tdo_para_index >= SVF_CHECK_TDO_PARA_SIZE) {
874 LOG_ERROR("toooooo many operation undone");
875 return ERROR_FAIL;
878 svf_check_tdo_para[svf_check_tdo_para_index].line_num = svf_line_number;
879 svf_check_tdo_para[svf_check_tdo_para_index].bit_len = bit_len;
880 svf_check_tdo_para[svf_check_tdo_para_index].enabled = enabled;
881 svf_check_tdo_para[svf_check_tdo_para_index].buffer_offset = buffer_offset;
882 svf_check_tdo_para_index++;
884 return ERROR_OK;
887 static int svf_execute_tap(void)
889 if ((!svf_nil) && (ERROR_OK != jtag_execute_queue()))
890 return ERROR_FAIL;
891 else if (ERROR_OK != svf_check_tdo())
892 return ERROR_FAIL;
894 svf_buffer_index = 0;
896 return ERROR_OK;
899 static int svf_run_command(struct command_context *cmd_ctx, char *cmd_str)
901 char *argus[256], command;
902 int num_of_argu = 0, i;
904 /* tmp variable */
905 int i_tmp;
907 /* for RUNTEST */
908 int run_count;
909 float min_time;
910 /* for XXR */
911 struct svf_xxr_para *xxr_para_tmp;
912 uint8_t **pbuffer_tmp;
913 struct scan_field field;
914 /* for STATE */
915 tap_state_t *path = NULL, state;
916 /* flag padding commands skipped due to -tap command */
917 int padding_command_skipped = 0;
919 if (ERROR_OK != svf_parse_cmd_string(cmd_str, strlen(cmd_str), argus, &num_of_argu))
920 return ERROR_FAIL;
922 /* NOTE: we're a bit loose here, because we ignore case in
923 * TAP state names (instead of insisting on uppercase).
926 command = svf_find_string_in_array(argus[0],
927 (char **)svf_command_name, ARRAY_SIZE(svf_command_name));
928 switch (command) {
929 case ENDDR:
930 case ENDIR:
931 if (num_of_argu != 2) {
932 LOG_ERROR("invalid parameter of %s", argus[0]);
933 return ERROR_FAIL;
936 i_tmp = tap_state_by_name(argus[1]);
938 if (svf_tap_state_is_stable(i_tmp)) {
939 if (command == ENDIR) {
940 svf_para.ir_end_state = i_tmp;
941 LOG_DEBUG("\tIR end_state = %s",
942 tap_state_name(i_tmp));
943 } else {
944 svf_para.dr_end_state = i_tmp;
945 LOG_DEBUG("\tDR end_state = %s",
946 tap_state_name(i_tmp));
948 } else {
949 LOG_ERROR("%s: %s is not a stable state",
950 argus[0], argus[1]);
951 return ERROR_FAIL;
953 break;
954 case FREQUENCY:
955 if ((num_of_argu != 1) && (num_of_argu != 3)) {
956 LOG_ERROR("invalid parameter of %s", argus[0]);
957 return ERROR_FAIL;
959 if (1 == num_of_argu) {
960 /* TODO: set jtag speed to full speed */
961 svf_para.frequency = 0;
962 } else {
963 if (strcmp(argus[2], "HZ")) {
964 LOG_ERROR("HZ not found in FREQUENCY command");
965 return ERROR_FAIL;
967 if (ERROR_OK != svf_execute_tap())
968 return ERROR_FAIL;
969 svf_para.frequency = atof(argus[1]);
970 /* TODO: set jtag speed to */
971 if (svf_para.frequency > 0) {
972 command_run_linef(cmd_ctx,
973 "adapter_khz %d",
974 (int)svf_para.frequency / 1000);
975 LOG_DEBUG("\tfrequency = %f", svf_para.frequency);
978 break;
979 case HDR:
980 if (svf_tap_is_specified) {
981 padding_command_skipped = 1;
982 break;
984 xxr_para_tmp = &svf_para.hdr_para;
985 goto XXR_common;
986 case HIR:
987 if (svf_tap_is_specified) {
988 padding_command_skipped = 1;
989 break;
991 xxr_para_tmp = &svf_para.hir_para;
992 goto XXR_common;
993 case TDR:
994 if (svf_tap_is_specified) {
995 padding_command_skipped = 1;
996 break;
998 xxr_para_tmp = &svf_para.tdr_para;
999 goto XXR_common;
1000 case TIR:
1001 if (svf_tap_is_specified) {
1002 padding_command_skipped = 1;
1003 break;
1005 xxr_para_tmp = &svf_para.tir_para;
1006 goto XXR_common;
1007 case SDR:
1008 xxr_para_tmp = &svf_para.sdr_para;
1009 goto XXR_common;
1010 case SIR:
1011 xxr_para_tmp = &svf_para.sir_para;
1012 goto XXR_common;
1013 XXR_common:
1014 /* XXR length [TDI (tdi)] [TDO (tdo)][MASK (mask)] [SMASK (smask)] */
1015 if ((num_of_argu > 10) || (num_of_argu % 2)) {
1016 LOG_ERROR("invalid parameter of %s", argus[0]);
1017 return ERROR_FAIL;
1019 i_tmp = xxr_para_tmp->len;
1020 xxr_para_tmp->len = atoi(argus[1]);
1021 LOG_DEBUG("\tlength = %d", xxr_para_tmp->len);
1022 xxr_para_tmp->data_mask = 0;
1023 for (i = 2; i < num_of_argu; i += 2) {
1024 if ((strlen(argus[i + 1]) < 3) || (argus[i + 1][0] != '(') ||
1025 (argus[i + 1][strlen(argus[i + 1]) - 1] != ')')) {
1026 LOG_ERROR("data section error");
1027 return ERROR_FAIL;
1029 argus[i + 1][strlen(argus[i + 1]) - 1] = '\0';
1030 /* TDI, TDO, MASK, SMASK */
1031 if (!strcmp(argus[i], "TDI")) {
1032 /* TDI */
1033 pbuffer_tmp = &xxr_para_tmp->tdi;
1034 xxr_para_tmp->data_mask |= XXR_TDI;
1035 } else if (!strcmp(argus[i], "TDO")) {
1036 /* TDO */
1037 pbuffer_tmp = &xxr_para_tmp->tdo;
1038 xxr_para_tmp->data_mask |= XXR_TDO;
1039 } else if (!strcmp(argus[i], "MASK")) {
1040 /* MASK */
1041 pbuffer_tmp = &xxr_para_tmp->mask;
1042 xxr_para_tmp->data_mask |= XXR_MASK;
1043 } else if (!strcmp(argus[i], "SMASK")) {
1044 /* SMASK */
1045 pbuffer_tmp = &xxr_para_tmp->smask;
1046 xxr_para_tmp->data_mask |= XXR_SMASK;
1047 } else {
1048 LOG_ERROR("unknow parameter: %s", argus[i]);
1049 return ERROR_FAIL;
1051 if (ERROR_OK !=
1052 svf_copy_hexstring_to_binary(&argus[i + 1][1], pbuffer_tmp, i_tmp,
1053 xxr_para_tmp->len)) {
1054 LOG_ERROR("fail to parse hex value");
1055 return ERROR_FAIL;
1057 SVF_BUF_LOG(DEBUG, *pbuffer_tmp, xxr_para_tmp->len, argus[i]);
1059 /* If a command changes the length of the last scan of the same type and the
1060 * MASK parameter is absent, */
1061 /* the mask pattern used is all cares */
1062 if (!(xxr_para_tmp->data_mask & XXR_MASK) && (i_tmp != xxr_para_tmp->len)) {
1063 /* MASK not defined and length changed */
1064 if (ERROR_OK !=
1065 svf_adjust_array_length(&xxr_para_tmp->mask, i_tmp,
1066 xxr_para_tmp->len)) {
1067 LOG_ERROR("fail to adjust length of array");
1068 return ERROR_FAIL;
1070 buf_set_ones(xxr_para_tmp->mask, xxr_para_tmp->len);
1072 /* If TDO is absent, no comparison is needed, set the mask to 0 */
1073 if (!(xxr_para_tmp->data_mask & XXR_TDO)) {
1074 if (NULL == xxr_para_tmp->tdo) {
1075 if (ERROR_OK !=
1076 svf_adjust_array_length(&xxr_para_tmp->tdo, i_tmp,
1077 xxr_para_tmp->len)) {
1078 LOG_ERROR("fail to adjust length of array");
1079 return ERROR_FAIL;
1082 if (NULL == xxr_para_tmp->mask) {
1083 if (ERROR_OK !=
1084 svf_adjust_array_length(&xxr_para_tmp->mask, i_tmp,
1085 xxr_para_tmp->len)) {
1086 LOG_ERROR("fail to adjust length of array");
1087 return ERROR_FAIL;
1090 memset(xxr_para_tmp->mask, 0, (xxr_para_tmp->len + 7) >> 3);
1092 /* do scan if necessary */
1093 if (SDR == command) {
1094 /* check buffer size first, reallocate if necessary */
1095 i = svf_para.hdr_para.len + svf_para.sdr_para.len +
1096 svf_para.tdr_para.len;
1097 if ((svf_buffer_size - svf_buffer_index) < ((i + 7) >> 3)) {
1098 /* reallocate buffer */
1099 if (svf_realloc_buffers(svf_buffer_index + ((i + 7) >> 3)) != ERROR_OK) {
1100 LOG_ERROR("not enough memory");
1101 return ERROR_FAIL;
1105 /* assemble dr data */
1106 i = 0;
1107 buf_set_buf(svf_para.hdr_para.tdi,
1109 &svf_tdi_buffer[svf_buffer_index],
1111 svf_para.hdr_para.len);
1112 i += svf_para.hdr_para.len;
1113 buf_set_buf(svf_para.sdr_para.tdi,
1115 &svf_tdi_buffer[svf_buffer_index],
1117 svf_para.sdr_para.len);
1118 i += svf_para.sdr_para.len;
1119 buf_set_buf(svf_para.tdr_para.tdi,
1121 &svf_tdi_buffer[svf_buffer_index],
1123 svf_para.tdr_para.len);
1124 i += svf_para.tdr_para.len;
1126 /* add check data */
1127 if (svf_para.sdr_para.data_mask & XXR_TDO) {
1128 /* assemble dr mask data */
1129 i = 0;
1130 buf_set_buf(svf_para.hdr_para.mask,
1132 &svf_mask_buffer[svf_buffer_index],
1134 svf_para.hdr_para.len);
1135 i += svf_para.hdr_para.len;
1136 buf_set_buf(svf_para.sdr_para.mask,
1138 &svf_mask_buffer[svf_buffer_index],
1140 svf_para.sdr_para.len);
1141 i += svf_para.sdr_para.len;
1142 buf_set_buf(svf_para.tdr_para.mask,
1144 &svf_mask_buffer[svf_buffer_index],
1146 svf_para.tdr_para.len);
1148 /* assemble dr check data */
1149 i = 0;
1150 buf_set_buf(svf_para.hdr_para.tdo,
1152 &svf_tdo_buffer[svf_buffer_index],
1154 svf_para.hdr_para.len);
1155 i += svf_para.hdr_para.len;
1156 buf_set_buf(svf_para.sdr_para.tdo,
1158 &svf_tdo_buffer[svf_buffer_index],
1160 svf_para.sdr_para.len);
1161 i += svf_para.sdr_para.len;
1162 buf_set_buf(svf_para.tdr_para.tdo,
1164 &svf_tdo_buffer[svf_buffer_index],
1166 svf_para.tdr_para.len);
1167 i += svf_para.tdr_para.len;
1169 svf_add_check_para(1, svf_buffer_index, i);
1170 } else
1171 svf_add_check_para(0, svf_buffer_index, i);
1172 field.num_bits = i;
1173 field.out_value = &svf_tdi_buffer[svf_buffer_index];
1174 field.in_value = &svf_tdi_buffer[svf_buffer_index];
1175 if (!svf_nil) {
1176 /* NOTE: doesn't use SVF-specified state paths */
1177 jtag_add_plain_dr_scan(field.num_bits,
1178 field.out_value,
1179 field.in_value,
1180 svf_para.dr_end_state);
1183 svf_buffer_index += (i + 7) >> 3;
1184 } else if (SIR == command) {
1185 /* check buffer size first, reallocate if necessary */
1186 i = svf_para.hir_para.len + svf_para.sir_para.len +
1187 svf_para.tir_para.len;
1188 if ((svf_buffer_size - svf_buffer_index) < ((i + 7) >> 3)) {
1189 if (svf_realloc_buffers(svf_buffer_index + ((i + 7) >> 3)) != ERROR_OK) {
1190 LOG_ERROR("not enough memory");
1191 return ERROR_FAIL;
1195 /* assemble ir data */
1196 i = 0;
1197 buf_set_buf(svf_para.hir_para.tdi,
1199 &svf_tdi_buffer[svf_buffer_index],
1201 svf_para.hir_para.len);
1202 i += svf_para.hir_para.len;
1203 buf_set_buf(svf_para.sir_para.tdi,
1205 &svf_tdi_buffer[svf_buffer_index],
1207 svf_para.sir_para.len);
1208 i += svf_para.sir_para.len;
1209 buf_set_buf(svf_para.tir_para.tdi,
1211 &svf_tdi_buffer[svf_buffer_index],
1213 svf_para.tir_para.len);
1214 i += svf_para.tir_para.len;
1216 /* add check data */
1217 if (svf_para.sir_para.data_mask & XXR_TDO) {
1218 /* assemble dr mask data */
1219 i = 0;
1220 buf_set_buf(svf_para.hir_para.mask,
1222 &svf_mask_buffer[svf_buffer_index],
1224 svf_para.hir_para.len);
1225 i += svf_para.hir_para.len;
1226 buf_set_buf(svf_para.sir_para.mask,
1228 &svf_mask_buffer[svf_buffer_index],
1230 svf_para.sir_para.len);
1231 i += svf_para.sir_para.len;
1232 buf_set_buf(svf_para.tir_para.mask,
1234 &svf_mask_buffer[svf_buffer_index],
1236 svf_para.tir_para.len);
1238 /* assemble dr check data */
1239 i = 0;
1240 buf_set_buf(svf_para.hir_para.tdo,
1242 &svf_tdo_buffer[svf_buffer_index],
1244 svf_para.hir_para.len);
1245 i += svf_para.hir_para.len;
1246 buf_set_buf(svf_para.sir_para.tdo,
1248 &svf_tdo_buffer[svf_buffer_index],
1250 svf_para.sir_para.len);
1251 i += svf_para.sir_para.len;
1252 buf_set_buf(svf_para.tir_para.tdo,
1254 &svf_tdo_buffer[svf_buffer_index],
1256 svf_para.tir_para.len);
1257 i += svf_para.tir_para.len;
1259 svf_add_check_para(1, svf_buffer_index, i);
1260 } else
1261 svf_add_check_para(0, svf_buffer_index, i);
1262 field.num_bits = i;
1263 field.out_value = &svf_tdi_buffer[svf_buffer_index];
1264 field.in_value = &svf_tdi_buffer[svf_buffer_index];
1265 if (!svf_nil) {
1266 /* NOTE: doesn't use SVF-specified state paths */
1267 jtag_add_plain_ir_scan(field.num_bits,
1268 field.out_value,
1269 field.in_value,
1270 svf_para.ir_end_state);
1273 svf_buffer_index += (i + 7) >> 3;
1275 break;
1276 case PIO:
1277 case PIOMAP:
1278 LOG_ERROR("PIO and PIOMAP are not supported");
1279 return ERROR_FAIL;
1280 break;
1281 case RUNTEST:
1282 /* RUNTEST [run_state] run_count run_clk [min_time SEC [MAXIMUM max_time
1283 * SEC]] [ENDSTATE end_state] */
1284 /* RUNTEST [run_state] min_time SEC [MAXIMUM max_time SEC] [ENDSTATE
1285 * end_state] */
1286 if ((num_of_argu < 3) && (num_of_argu > 11)) {
1287 LOG_ERROR("invalid parameter of %s", argus[0]);
1288 return ERROR_FAIL;
1290 /* init */
1291 run_count = 0;
1292 min_time = 0;
1293 i = 1;
1295 /* run_state */
1296 i_tmp = tap_state_by_name(argus[i]);
1297 if (i_tmp != TAP_INVALID) {
1298 if (svf_tap_state_is_stable(i_tmp)) {
1299 svf_para.runtest_run_state = i_tmp;
1301 /* When a run_state is specified, the new
1302 * run_state becomes the default end_state.
1304 svf_para.runtest_end_state = i_tmp;
1305 LOG_DEBUG("\trun_state = %s", tap_state_name(i_tmp));
1306 i++;
1307 } else {
1308 LOG_ERROR("%s: %s is not a stable state", argus[0], tap_state_name(i_tmp));
1309 return ERROR_FAIL;
1313 /* run_count run_clk */
1314 if (((i + 2) <= num_of_argu) && strcmp(argus[i + 1], "SEC")) {
1315 if (!strcmp(argus[i + 1], "TCK")) {
1316 /* clock source is TCK */
1317 run_count = atoi(argus[i]);
1318 LOG_DEBUG("\trun_count@TCK = %d", run_count);
1319 } else {
1320 LOG_ERROR("%s not supported for clock", argus[i + 1]);
1321 return ERROR_FAIL;
1323 i += 2;
1325 /* min_time SEC */
1326 if (((i + 2) <= num_of_argu) && !strcmp(argus[i + 1], "SEC")) {
1327 min_time = atof(argus[i]);
1328 LOG_DEBUG("\tmin_time = %fs", min_time);
1329 i += 2;
1331 /* MAXIMUM max_time SEC */
1332 if (((i + 3) <= num_of_argu) &&
1333 !strcmp(argus[i], "MAXIMUM") && !strcmp(argus[i + 2], "SEC")) {
1334 float max_time = 0;
1335 max_time = atof(argus[i + 1]);
1336 LOG_DEBUG("\tmax_time = %fs", max_time);
1337 i += 3;
1339 /* ENDSTATE end_state */
1340 if (((i + 2) <= num_of_argu) && !strcmp(argus[i], "ENDSTATE")) {
1341 i_tmp = tap_state_by_name(argus[i + 1]);
1343 if (svf_tap_state_is_stable(i_tmp)) {
1344 svf_para.runtest_end_state = i_tmp;
1345 LOG_DEBUG("\tend_state = %s", tap_state_name(i_tmp));
1346 } else {
1347 LOG_ERROR("%s: %s is not a stable state", argus[0], tap_state_name(i_tmp));
1348 return ERROR_FAIL;
1350 i += 2;
1353 /* all parameter should be parsed */
1354 if (i == num_of_argu) {
1355 #if 1
1356 /* FIXME handle statemove failures */
1357 uint32_t min_usec = 1000000 * min_time;
1359 /* enter into run_state if necessary */
1360 if (cmd_queue_cur_state != svf_para.runtest_run_state)
1361 svf_add_statemove(svf_para.runtest_run_state);
1363 /* add clocks and/or min wait */
1364 if (run_count > 0) {
1365 if (!svf_nil)
1366 jtag_add_clocks(run_count);
1369 if (min_usec > 0) {
1370 if (!svf_nil)
1371 jtag_add_sleep(min_usec);
1374 /* move to end_state if necessary */
1375 if (svf_para.runtest_end_state != svf_para.runtest_run_state)
1376 svf_add_statemove(svf_para.runtest_end_state);
1378 #else
1379 if (svf_para.runtest_run_state != TAP_IDLE) {
1380 LOG_ERROR("cannot runtest in %s state",
1381 tap_state_name(svf_para.runtest_run_state));
1382 return ERROR_FAIL;
1385 if (!svf_nil)
1386 jtag_add_runtest(run_count, svf_para.runtest_end_state);
1387 #endif
1388 } else {
1389 LOG_ERROR("fail to parse parameter of RUNTEST, %d out of %d is parsed",
1391 num_of_argu);
1392 return ERROR_FAIL;
1394 break;
1395 case STATE:
1396 /* STATE [pathstate1 [pathstate2 ...[pathstaten]]] stable_state */
1397 if (num_of_argu < 2) {
1398 LOG_ERROR("invalid parameter of %s", argus[0]);
1399 return ERROR_FAIL;
1401 if (num_of_argu > 2) {
1402 /* STATE pathstate1 ... stable_state */
1403 path = malloc((num_of_argu - 1) * sizeof(tap_state_t));
1404 if (NULL == path) {
1405 LOG_ERROR("not enough memory");
1406 return ERROR_FAIL;
1408 num_of_argu--; /* num of path */
1409 i_tmp = 1; /* path is from parameter 1 */
1410 for (i = 0; i < num_of_argu; i++, i_tmp++) {
1411 path[i] = tap_state_by_name(argus[i_tmp]);
1412 if (path[i] == TAP_INVALID) {
1413 LOG_ERROR("%s: %s is not a valid state", argus[0], argus[i_tmp]);
1414 free(path);
1415 return ERROR_FAIL;
1417 /* OpenOCD refuses paths containing TAP_RESET */
1418 if (TAP_RESET == path[i]) {
1419 /* FIXME last state MUST be stable! */
1420 if (i > 0) {
1421 if (!svf_nil)
1422 jtag_add_pathmove(i, path);
1424 if (!svf_nil)
1425 jtag_add_tlr();
1426 num_of_argu -= i + 1;
1427 i = -1;
1430 if (num_of_argu > 0) {
1431 /* execute last path if necessary */
1432 if (svf_tap_state_is_stable(path[num_of_argu - 1])) {
1433 /* last state MUST be stable state */
1434 if (!svf_nil)
1435 jtag_add_pathmove(num_of_argu, path);
1436 LOG_DEBUG("\tmove to %s by path_move",
1437 tap_state_name(path[num_of_argu - 1]));
1438 } else {
1439 LOG_ERROR("%s: %s is not a stable state",
1440 argus[0],
1441 tap_state_name(path[num_of_argu - 1]));
1442 free(path);
1443 return ERROR_FAIL;
1447 free(path);
1448 path = NULL;
1449 } else {
1450 /* STATE stable_state */
1451 state = tap_state_by_name(argus[1]);
1452 if (svf_tap_state_is_stable(state)) {
1453 LOG_DEBUG("\tmove to %s by svf_add_statemove",
1454 tap_state_name(state));
1455 /* FIXME handle statemove failures */
1456 svf_add_statemove(state);
1457 } else {
1458 LOG_ERROR("%s: %s is not a stable state",
1459 argus[0], tap_state_name(state));
1460 return ERROR_FAIL;
1463 break;
1464 case TRST:
1465 /* TRST trst_mode */
1466 if (num_of_argu != 2) {
1467 LOG_ERROR("invalid parameter of %s", argus[0]);
1468 return ERROR_FAIL;
1470 if (svf_para.trst_mode != TRST_ABSENT) {
1471 if (ERROR_OK != svf_execute_tap())
1472 return ERROR_FAIL;
1473 i_tmp = svf_find_string_in_array(argus[1],
1474 (char **)svf_trst_mode_name,
1475 ARRAY_SIZE(svf_trst_mode_name));
1476 switch (i_tmp) {
1477 case TRST_ON:
1478 if (!svf_nil)
1479 jtag_add_reset(1, 0);
1480 break;
1481 case TRST_Z:
1482 case TRST_OFF:
1483 if (!svf_nil)
1484 jtag_add_reset(0, 0);
1485 break;
1486 case TRST_ABSENT:
1487 break;
1488 default:
1489 LOG_ERROR("unknown TRST mode: %s", argus[1]);
1490 return ERROR_FAIL;
1492 svf_para.trst_mode = i_tmp;
1493 LOG_DEBUG("\ttrst_mode = %s", svf_trst_mode_name[svf_para.trst_mode]);
1494 } else {
1495 LOG_ERROR("can not accpet TRST command if trst_mode is ABSENT");
1496 return ERROR_FAIL;
1498 break;
1499 default:
1500 LOG_ERROR("invalid svf command: %s", argus[0]);
1501 return ERROR_FAIL;
1502 break;
1505 if (!svf_quiet) {
1506 if (padding_command_skipped)
1507 LOG_USER("(Above Padding command skipped, as per -tap argument)");
1510 if (debug_level >= LOG_LVL_DEBUG) {
1511 /* for convenient debugging, execute tap if possible */
1512 if ((svf_buffer_index > 0) && \
1513 (((command != STATE) && (command != RUNTEST)) || \
1514 ((command == STATE) && (num_of_argu == 2)))) {
1515 if (ERROR_OK != svf_execute_tap())
1516 return ERROR_FAIL;
1518 /* output debug info */
1519 if ((SIR == command) || (SDR == command)) {
1520 SVF_BUF_LOG(DEBUG, svf_tdi_buffer, svf_check_tdo_para[0].bit_len, "TDO read");
1523 } else {
1524 /* for fast executing, execute tap if necessary */
1525 /* half of the buffer is for the next command */
1526 if (((svf_buffer_index >= SVF_MAX_BUFFER_SIZE_TO_COMMIT) ||
1527 (svf_check_tdo_para_index >= SVF_CHECK_TDO_PARA_SIZE / 2)) && \
1528 (((command != STATE) && (command != RUNTEST)) || \
1529 ((command == STATE) && (num_of_argu == 2))))
1530 return svf_execute_tap();
1533 return ERROR_OK;
1536 static const struct command_registration svf_command_handlers[] = {
1538 .name = "svf",
1539 .handler = handle_svf_command,
1540 .mode = COMMAND_EXEC,
1541 .help = "Runs a SVF file.",
1542 .usage = "svf [-tap device.tap] <file> [quiet] [nil] [progress]",
1544 COMMAND_REGISTRATION_DONE
1547 int svf_register_commands(struct command_context *cmd_ctx)
1549 return register_commands(cmd_ctx, NULL, svf_command_handlers);