jtag/core, target: unregister JTAG events

[openocd.git] / src / target / adi_v5_swd.c

/***************************************************************************
 *
 *   Copyright (C) 2010 by David Brownell
 *
 *   This program is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU General Public License as published by
 *   the Free Software Foundation; either version 2 of the License, or
 *   (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU General Public License for more details.
 *
 *   You should have received a copy of the GNU General Public License
 *   along with this program.  If not, see <http://www.gnu.org/licenses/>.
 ***************************************************************************/

/**
 * @file
 * Utilities to support ARM "Serial Wire Debug" (SWD), a low pin-count debug
 * link protocol used in cases where JTAG is not wanted.  This is coupled to
 * recent versions of ARM's "CoreSight" debug framework.  This specific code
 * is a transport level interface, with "target/arm_adi_v5.[hc]" code
 * understanding operation semantics, shared with the JTAG transport.
 *
 * Single-DAP support only.
 *
 * for details, see "ARM IHI 0031A"
 * ARM Debug Interface v5 Architecture Specification
 * especially section 5.3 for SWD protocol
 *
 * On many chips (most current Cortex-M3 parts) SWD is a run-time alternative
 * to JTAG.  Boards may support one or both.  There are also SWD-only chips,
 * (using SW-DP not SWJ-DP).
 *
 * Even boards that also support JTAG can benefit from SWD support, because
 * usually there's no way to access the SWO trace view mechanism in JTAG mode.
 * That is, trace access may require SWD support.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include "arm.h"
#include "arm_adi_v5.h"
#include <helper/time_support.h>

#include <transport/transport.h>
#include <jtag/interface.h>

#include <jtag/swd.h>

static bool do_sync;

static void swd_finish_read(struct adiv5_dap *dap)
{
        const struct swd_driver *swd = adiv5_dap_swd_driver(dap);
        if (dap->last_read != NULL) {
                swd->read_reg(swd_cmd(true, false, DP_RDBUFF), dap->last_read, 0);
                dap->last_read = NULL;
        }
}

static int swd_queue_dp_write(struct adiv5_dap *dap, unsigned reg,
                uint32_t data);
static int swd_queue_dp_read(struct adiv5_dap *dap, unsigned reg,
                uint32_t *data);

static void swd_clear_sticky_errors(struct adiv5_dap *dap)
{
        const struct swd_driver *swd = adiv5_dap_swd_driver(dap);
        assert(swd);

        swd->write_reg(swd_cmd(false,  false, DP_ABORT),
                STKCMPCLR | STKERRCLR | WDERRCLR | ORUNERRCLR, 0);
}

static int swd_run_inner(struct adiv5_dap *dap)
{
        const struct swd_driver *swd = adiv5_dap_swd_driver(dap);
        int retval;

        retval = swd->run();

        if (retval != ERROR_OK) {
                /* fault response */
                dap->do_reconnect = true;
        }

        return retval;
}

static int swd_connect(struct adiv5_dap *dap)
{
        const struct swd_driver *swd = adiv5_dap_swd_driver(dap);
        uint32_t dpidr;
        int status;

        /* FIXME validate transport config ... is the
         * configured DAP present (check IDCODE)?
         * Is *only* one DAP configured?
         *
         * MUST READ DPIDR
         */

        /* Check if we should reset srst already when connecting, but not if reconnecting. */
        if (!dap->do_reconnect) {
                enum reset_types jtag_reset_config = jtag_get_reset_config();

                if (jtag_reset_config & RESET_CNCT_UNDER_SRST) {
                        if (jtag_reset_config & RESET_SRST_NO_GATING)
                                swd_add_reset(1);
                        else
                                LOG_WARNING("\'srst_nogate\' reset_config option is required");
                }
        }

        /* Note, debugport_init() does setup too */
        swd->switch_seq(JTAG_TO_SWD);

        /* Clear link state, including the SELECT cache. */
        dap->do_reconnect = false;
        dap_invalidate_cache(dap);

        swd_queue_dp_read(dap, DP_DPIDR, &dpidr);

        /* force clear all sticky faults */
        swd_clear_sticky_errors(dap);

        status = swd_run_inner(dap);

        if (status == ERROR_OK) {
                LOG_INFO("SWD DPIDR %#8.8" PRIx32, dpidr);
                dap->do_reconnect = false;
                status = dap_dp_init(dap);
        } else
                dap->do_reconnect = true;

        return status;
}

static inline int check_sync(struct adiv5_dap *dap)
{
        return do_sync ? swd_run_inner(dap) : ERROR_OK;
}

static int swd_check_reconnect(struct adiv5_dap *dap)
{
        if (dap->do_reconnect)
                return swd_connect(dap);

        return ERROR_OK;
}

static int swd_queue_ap_abort(struct adiv5_dap *dap, uint8_t *ack)
{
        const struct swd_driver *swd = adiv5_dap_swd_driver(dap);
        assert(swd);

        swd->write_reg(swd_cmd(false,  false, DP_ABORT),
                DAPABORT | STKCMPCLR | STKERRCLR | WDERRCLR | ORUNERRCLR, 0);
        return check_sync(dap);
}

/** Select the DP register bank matching bits 7:4 of reg. */
static void swd_queue_dp_bankselect(struct adiv5_dap *dap, unsigned reg)
{
        /* Only register address 4 is banked. */
        if ((reg & 0xf) != 4)
                return;

        uint32_t select_dp_bank = (reg & 0x000000F0) >> 4;
        uint32_t sel = select_dp_bank
                        | (dap->select & (DP_SELECT_APSEL | DP_SELECT_APBANK));

        if (sel == dap->select)
                return;

        dap->select = sel;

        swd_queue_dp_write(dap, DP_SELECT, sel);
}

static int swd_queue_dp_read(struct adiv5_dap *dap, unsigned reg,
                uint32_t *data)
{
        const struct swd_driver *swd = adiv5_dap_swd_driver(dap);
        assert(swd);

        int retval = swd_check_reconnect(dap);
        if (retval != ERROR_OK)
                return retval;

        swd_queue_dp_bankselect(dap, reg);
        swd->read_reg(swd_cmd(true,  false, reg), data, 0);

        return check_sync(dap);
}

static int swd_queue_dp_write(struct adiv5_dap *dap, unsigned reg,
                uint32_t data)
{
        const struct swd_driver *swd = adiv5_dap_swd_driver(dap);
        assert(swd);

        int retval = swd_check_reconnect(dap);
        if (retval != ERROR_OK)
                return retval;

        swd_finish_read(dap);
        swd_queue_dp_bankselect(dap, reg);
        swd->write_reg(swd_cmd(false,  false, reg), data, 0);

        return check_sync(dap);
}

/** Select the AP register bank matching bits 7:4 of reg. */
static void swd_queue_ap_bankselect(struct adiv5_ap *ap, unsigned reg)
{
        struct adiv5_dap *dap = ap->dap;
        uint32_t sel = ((uint32_t)ap->ap_num << 24)
                        | (reg & 0x000000F0)
                        | (dap->select & DP_SELECT_DPBANK);

        if (sel == dap->select)
                return;

        dap->select = sel;

        swd_queue_dp_write(dap, DP_SELECT, sel);
}

static int swd_queue_ap_read(struct adiv5_ap *ap, unsigned reg,
                uint32_t *data)
{
        struct adiv5_dap *dap = ap->dap;
        const struct swd_driver *swd = adiv5_dap_swd_driver(dap);
        assert(swd);

        int retval = swd_check_reconnect(dap);
        if (retval != ERROR_OK)
                return retval;

        swd_queue_ap_bankselect(ap, reg);
        swd->read_reg(swd_cmd(true,  true, reg), dap->last_read, ap->memaccess_tck);
        dap->last_read = data;

        return check_sync(dap);
}

static int swd_queue_ap_write(struct adiv5_ap *ap, unsigned reg,
                uint32_t data)
{
        struct adiv5_dap *dap = ap->dap;
        const struct swd_driver *swd = adiv5_dap_swd_driver(dap);
        assert(swd);

        int retval = swd_check_reconnect(dap);
        if (retval != ERROR_OK)
                return retval;

        swd_finish_read(dap);
        swd_queue_ap_bankselect(ap, reg);
        swd->write_reg(swd_cmd(false,  true, reg), data, ap->memaccess_tck);

        return check_sync(dap);
}

/** Executes all queued DAP operations. */
static int swd_run(struct adiv5_dap *dap)
{
        swd_finish_read(dap);
        return swd_run_inner(dap);
}

const struct dap_ops swd_dap_ops = {
        .connect = swd_connect,
        .queue_dp_read = swd_queue_dp_read,
        .queue_dp_write = swd_queue_dp_write,
        .queue_ap_read = swd_queue_ap_read,
        .queue_ap_write = swd_queue_ap_write,
        .queue_ap_abort = swd_queue_ap_abort,
        .run = swd_run,
};

/*
 * This represents the bits which must be sent out on TMS/SWDIO to
 * switch a DAP implemented using an SWJ-DP module into SWD mode.
 * These bits are stored (and transmitted) LSB-first.
 *
 * See the DAP-Lite specification, section 2.2.5 for information
 * about making the debug link select SWD or JTAG.  (Similar info
 * is in a few other ARM documents.)
 */
static const uint8_t jtag2swd_bitseq[] = {
        /* More than 50 TCK/SWCLK cycles with TMS/SWDIO high,
         * putting both JTAG and SWD logic into reset state.
         */
        0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
        /* Switching sequence enables SWD and disables JTAG
         * NOTE: bits in the DP's IDCODE may expose the need for
         * an old/obsolete/deprecated sequence (0xb6 0xed).
         */
        0x9e, 0xe7,
        /* More than 50 TCK/SWCLK cycles with TMS/SWDIO high,
         * putting both JTAG and SWD logic into reset state.
         */
        0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
};

/**
 * Put the debug link into SWD mode, if the target supports it.
 * The link's initial mode may be either JTAG (for example,
 * with SWJ-DP after reset) or SWD.
 *
 * @param target Enters SWD mode (if possible).
 *
 * Note that targets using the JTAG-DP do not support SWD, and that
 * some targets which could otherwise support it may have have been
 * configured to disable SWD signaling
 *
 * @return ERROR_OK or else a fault code.
 */
int dap_to_swd(struct target *target)
{
        struct arm *arm = target_to_arm(target);
        int retval;

        if (!arm->dap) {
                LOG_ERROR("SWD mode is not available");
                return ERROR_FAIL;
        }

        LOG_DEBUG("Enter SWD mode");

        /* REVISIT it's ugly to need to make calls to a "jtag"
         * subsystem if the link may not be in JTAG mode...
         */

        retval =  jtag_add_tms_seq(8 * sizeof(jtag2swd_bitseq),
                        jtag2swd_bitseq, TAP_INVALID);
        if (retval == ERROR_OK)
                retval = jtag_execute_queue();

        /* set up the DAP's ops vector for SWD mode. */
        arm->dap->ops = &swd_dap_ops;

        return retval;
}

static const struct command_registration swd_commands[] = {
        {
                /*
                 * Set up SWD and JTAG targets identically, unless/until
                 * infrastructure improves ...  meanwhile, ignore all
                 * JTAG-specific stuff like IR length for SWD.
                 *
                 * REVISIT can we verify "just one SWD DAP" here/early?
                 */
                .name = "newdap",
                .jim_handler = jim_jtag_newtap,
                .mode = COMMAND_CONFIG,
                .help = "declare a new SWD DAP"
        },
        COMMAND_REGISTRATION_DONE
};

static const struct command_registration swd_handlers[] = {
        {
                .name = "swd",
                .mode = COMMAND_ANY,
                .help = "SWD command group",
                .chain = swd_commands,
        },
        COMMAND_REGISTRATION_DONE
};

static int swd_select(struct command_context *ctx)
{
        /* FIXME: only place where global 'jtag_interface' is still needed */
        extern struct jtag_interface *jtag_interface;
        const struct swd_driver *swd = jtag_interface->swd;
        int retval;

        retval = register_commands(ctx, NULL, swd_handlers);
        if (retval != ERROR_OK)
                return retval;

         /* be sure driver is in SWD mode; start
          * with hardware default TRN (1), it can be changed later
          */
        if (!swd || !swd->read_reg || !swd->write_reg || !swd->init) {
                LOG_DEBUG("no SWD driver?");
                return ERROR_FAIL;
        }

        retval = swd->init();
        if (retval != ERROR_OK) {
                LOG_DEBUG("can't init SWD driver");
                return retval;
        }

        return retval;
}

static int swd_init(struct command_context *ctx)
{
        /* nothing done here, SWD is initialized
         * together with the DAP */
        return ERROR_OK;
}

static struct transport swd_transport = {
        .name = "swd",
        .select = swd_select,
        .init = swd_init,
};

static void swd_constructor(void) __attribute__((constructor));
static void swd_constructor(void)
{
        transport_register(&swd_transport);
}

/** Returns true if the current debug session
 * is using SWD as its transport.
 */
bool transport_is_swd(void)
{
        return get_current_transport() == &swd_transport;
}