GDB fileIO stdout support
[openocd.git] / src / target / arm_semihosting.c
blob31ca7792f26248baa45c18e2f40824209908a561
1 /***************************************************************************
2 * Copyright (C) 2009 by Marvell Technology Group Ltd. *
3 * Written by Nicolas Pitre <nico@marvell.com> *
4 * *
5 * Copyright (C) 2010 by Spencer Oliver *
6 * spen@spen-soft.co.uk *
7 * *
8 * Copyright (C) 2016 by Square, Inc. *
9 * Steven Stallion <stallion@squareup.com> *
10 * *
11 * Copyright (C) 2018 by Liviu Ionescu *
12 * <ilg@livius.net> *
13 * *
14 * This program is free software; you can redistribute it and/or modify *
15 * it under the terms of the GNU General Public License as published by *
16 * the Free Software Foundation; either version 2 of the License, or *
17 * (at your option) any later version. *
18 * *
19 * This program is distributed in the hope that it will be useful, *
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
22 * GNU General Public License for more details. *
23 * *
24 * You should have received a copy of the GNU General Public License *
25 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
26 ***************************************************************************/
28 /**
29 * @file
30 * Hold ARM semihosting support.
32 * Semihosting enables code running on an ARM target to use the I/O
33 * facilities on the host computer. The target application must be linked
34 * against a library that forwards operation requests by using the SVC
35 * instruction trapped at the Supervisor Call vector by the debugger.
36 * Details can be found in chapter 8 of DUI0203I_rvct_developer_guide.pdf
37 * from ARM Ltd.
40 #ifdef HAVE_CONFIG_H
41 #include "config.h"
42 #endif
44 #include "arm.h"
45 #include "armv4_5.h"
46 #include "arm7_9_common.h"
47 #include "armv7m.h"
48 #include "armv7a.h"
49 #include "armv8.h"
50 #include "cortex_m.h"
51 #include "register.h"
52 #include "arm_opcodes.h"
53 #include "target_type.h"
54 #include "arm_semihosting.h"
55 #include <helper/binarybuffer.h>
56 #include <helper/log.h>
57 #include <sys/stat.h>
59 static int arm_semihosting_resume(struct target *target, int *retval)
61 if (is_armv8(target_to_armv8(target))) {
62 struct armv8_common *armv8 = target_to_armv8(target);
63 if (armv8->last_run_control_op == ARMV8_RUNCONTROL_RESUME) {
64 *retval = target_resume(target, 1, 0, 0, 0);
65 if (*retval != ERROR_OK) {
66 LOG_ERROR("Failed to resume target");
67 return 0;
69 } else if (armv8->last_run_control_op == ARMV8_RUNCONTROL_STEP)
70 target->debug_reason = DBG_REASON_SINGLESTEP;
71 } else {
72 *retval = target_resume(target, 1, 0, 0, 0);
73 if (*retval != ERROR_OK) {
74 LOG_ERROR("Failed to resume target");
75 return 0;
78 return 1;
81 static int post_result(struct target *target)
83 struct arm *arm = target_to_arm(target);
85 /* REVISIT this looks wrong ... ARM11 and Cortex-A8
86 * should work this way at least sometimes.
88 if (is_arm7_9(target_to_arm7_9(target)) ||
89 is_armv7a(target_to_armv7a(target))) {
90 uint32_t spsr;
92 /* return value in R0 */
93 buf_set_u32(arm->core_cache->reg_list[0].value, 0, 32, target->semihosting->result);
94 arm->core_cache->reg_list[0].dirty = 1;
96 /* LR --> PC */
97 buf_set_u32(arm->core_cache->reg_list[15].value, 0, 32,
98 buf_get_u32(arm_reg_current(arm, 14)->value, 0, 32));
99 arm->core_cache->reg_list[15].dirty = 1;
101 /* saved PSR --> current PSR */
102 spsr = buf_get_u32(arm->spsr->value, 0, 32);
104 /* REVISIT should this be arm_set_cpsr(arm, spsr)
105 * instead of a partially unrolled version?
108 buf_set_u32(arm->cpsr->value, 0, 32, spsr);
109 arm->cpsr->dirty = 1;
110 arm->core_mode = spsr & 0x1f;
111 if (spsr & 0x20)
112 arm->core_state = ARM_STATE_THUMB;
114 } else if (is_armv8(target_to_armv8(target))) {
115 if (arm->core_state == ARM_STATE_AARCH64) {
116 /* return value in R0 */
117 buf_set_u64(arm->core_cache->reg_list[0].value, 0, 64, target->semihosting->result);
118 arm->core_cache->reg_list[0].dirty = 1;
120 uint64_t pc = buf_get_u64(arm->core_cache->reg_list[32].value, 0, 64);
121 buf_set_u64(arm->pc->value, 0, 64, pc + 4);
122 arm->pc->dirty = 1;
124 } else {
125 /* resume execution, this will be pc+2 to skip over the
126 * bkpt instruction */
128 /* return result in R0 */
129 buf_set_u32(arm->core_cache->reg_list[0].value, 0, 32, target->semihosting->result);
130 arm->core_cache->reg_list[0].dirty = 1;
133 return ERROR_OK;
137 * Initialize ARM semihosting support.
139 * @param target Pointer to the ARM target to initialize.
140 * @return An error status if there is a problem during initialization.
142 int arm_semihosting_init(struct target *target)
144 struct arm *arm = target_to_arm(target);
145 assert(arm->setup_semihosting);
146 semihosting_common_init(target, arm->setup_semihosting, post_result);
148 return ERROR_OK;
152 * Checks for and processes an ARM semihosting request. This is meant
153 * to be called when the target is stopped due to a debug mode entry.
154 * If the value 0 is returned then there was nothing to process. A non-zero
155 * return value signifies that a request was processed and the target resumed,
156 * or an error was encountered, in which case the caller must return
157 * immediately.
159 * @param target Pointer to the ARM target to process. This target must
160 * not represent an ARMv6-M or ARMv7-M processor.
161 * @param retval Pointer to a location where the return code will be stored
162 * @return non-zero value if a request was processed or an error encountered
164 int arm_semihosting(struct target *target, int *retval)
166 struct arm *arm = target_to_arm(target);
167 struct armv7a_common *armv7a = target_to_armv7a(target);
168 uint32_t pc, lr, spsr;
169 struct reg *r;
171 struct semihosting *semihosting = target->semihosting;
172 if (!semihosting)
173 return 0;
175 if (!semihosting->is_active)
176 return 0;
178 if (is_arm7_9(target_to_arm7_9(target)) ||
179 is_armv7a(armv7a)) {
180 uint32_t vbar = 0x00000000;
182 if (arm->core_mode != ARM_MODE_SVC)
183 return 0;
185 if (is_armv7a(armv7a)) {
186 struct arm_dpm *dpm = armv7a->arm.dpm;
188 *retval = dpm->prepare(dpm);
189 if (*retval == ERROR_OK) {
190 *retval = dpm->instr_read_data_r0(dpm,
191 ARMV4_5_MRC(15, 0, 0, 12, 0, 0),
192 &vbar);
194 dpm->finish(dpm);
196 if (*retval != ERROR_OK)
197 return 1;
198 } else {
199 return 1;
203 /* Check for PC == 0x00000008 or 0xffff0008: Supervisor Call vector. */
204 r = arm->pc;
205 pc = buf_get_u32(r->value, 0, 32);
206 if (pc != (vbar + 0x00000008) && pc != 0xffff0008)
207 return 0;
209 r = arm_reg_current(arm, 14);
210 lr = buf_get_u32(r->value, 0, 32);
212 /* Core-specific code should make sure SPSR is retrieved
213 * when the above checks pass...
215 if (!arm->spsr->valid) {
216 LOG_ERROR("SPSR not valid!");
217 *retval = ERROR_FAIL;
218 return 1;
221 spsr = buf_get_u32(arm->spsr->value, 0, 32);
223 /* check instruction that triggered this trap */
224 if (spsr & (1 << 5)) {
225 /* was in Thumb (or ThumbEE) mode */
226 uint8_t insn_buf[2];
227 uint16_t insn;
229 *retval = target_read_memory(target, lr-2, 2, 1, insn_buf);
230 if (*retval != ERROR_OK)
231 return 1;
232 insn = target_buffer_get_u16(target, insn_buf);
234 /* SVC 0xab */
235 if (insn != 0xDFAB)
236 return 0;
237 } else if (spsr & (1 << 24)) {
238 /* was in Jazelle mode */
239 return 0;
240 } else {
241 /* was in ARM mode */
242 uint8_t insn_buf[4];
243 uint32_t insn;
245 *retval = target_read_memory(target, lr-4, 4, 1, insn_buf);
246 if (*retval != ERROR_OK)
247 return 1;
248 insn = target_buffer_get_u32(target, insn_buf);
250 /* SVC 0x123456 */
251 if (insn != 0xEF123456)
252 return 0;
254 } else if (is_armv7m(target_to_armv7m(target))) {
255 uint16_t insn;
257 if (target->debug_reason != DBG_REASON_BREAKPOINT)
258 return 0;
260 r = arm->pc;
261 pc = buf_get_u32(r->value, 0, 32);
263 pc &= ~1;
264 *retval = target_read_u16(target, pc, &insn);
265 if (*retval != ERROR_OK)
266 return 1;
268 /* bkpt 0xAB */
269 if (insn != 0xBEAB)
270 return 0;
271 } else if (is_armv8(target_to_armv8(target))) {
272 if (target->debug_reason != DBG_REASON_BREAKPOINT)
273 return 0;
275 if (arm->core_state == ARM_STATE_AARCH64) {
276 uint32_t insn = 0;
277 r = arm->pc;
278 uint64_t pc64 = buf_get_u64(r->value, 0, 64);
279 *retval = target_read_u32(target, pc64, &insn);
281 if (*retval != ERROR_OK)
282 return 1;
284 /* bkpt 0xAB */
285 if (insn != 0xD45E0000)
286 return 0;
287 } else
288 return 1;
289 } else {
290 LOG_ERROR("Unsupported semi-hosting Target");
291 return 0;
294 /* Perform semihosting if we are not waiting on a fileio
295 * operation to complete.
297 if (!semihosting->hit_fileio) {
298 if (is_armv8(target_to_armv8(target)) &&
299 arm->core_state == ARM_STATE_AARCH64) {
300 /* Read op and param from register x0 and x1 respectively. */
301 semihosting->op = buf_get_u64(arm->core_cache->reg_list[0].value, 0, 64);
302 semihosting->param = buf_get_u64(arm->core_cache->reg_list[1].value, 0, 64);
303 semihosting->word_size_bytes = 8;
304 } else {
305 /* Read op and param from register r0 and r1 respectively. */
306 semihosting->op = buf_get_u32(arm->core_cache->reg_list[0].value, 0, 32);
307 semihosting->param = buf_get_u32(arm->core_cache->reg_list[1].value, 0, 32);
308 semihosting->word_size_bytes = 4;
311 /* Check for ARM operation numbers. */
312 if (0 <= semihosting->op && semihosting->op <= 0x31) {
313 *retval = semihosting_common(target);
314 if (*retval != ERROR_OK) {
315 LOG_ERROR("Failed semihosting operation");
316 return 0;
318 } else {
319 /* Unknown operation number, not a semihosting call. */
320 return 0;
324 /* Resume if target it is resumable and we are not waiting on a fileio
325 * operation to complete:
327 if (semihosting->is_resumable && !semihosting->hit_fileio)
328 return arm_semihosting_resume(target, retval);
330 return 0;