conf/bitbake.conf

   1 ##################################################################
   2 # Recipe Parsing
   3 ##################################################################
   4 BBMASK = "/(nonworking|obsolete)/"
   5 BBMASK[type] = "regex"
   6
   7 ##################################################################
   8 # Standard target filesystem layout.
   9 ##################################################################
  10
  11 # Path prefixes
  12 layout_prefix = "${prefix}"
  13 layout_exec_prefix = "${exec_prefix}"
  14 layout_base_prefix = "${base_prefix}"
  15
  16 # Base paths
  17 layout_base_bindir = "${base_bindir}"
  18 layout_base_sbindir = "${base_sbindir}"
  19 layout_base_libdir = "${base_libdir}"
  20
  21 # Architecture independent paths
  22 layout_sysconfdir = "${sysconfdir}"
  23 layout_localstatedir = "${localstatedir}"
  24 layout_servicedir = "${servicedir}"
  25 layout_sharedstatedir = "${sharedstatedir}"
  26 layout_datadir = "${datadir}"
  27 layout_infodir = "${infodir}"
  28 layout_mandir = "${mandir}"
  29 layout_docdir = "${docdir}"
  30
  31 # Architecture dependent paths
  32 layout_bindir = "${bindir}"
  33 layout_sbindir = "${sbindir}"
  34 layout_libdir = "${libdir}"
  35 layout_includedir = "${includedir}"
  36 layout_libexecdir = "${libexecdir}"
  37
  38 ##################################################################
  39 # Standard target filesystem paths.
  40 ##################################################################
  41
  42 # Path prefixes
  43 export base_prefix = ""
  44 export prefix = "/usr"
  45 export exec_prefix = "/usr"
  46
  47 # Base paths
  48 export base_bindir = "${base_prefix}/bin"
  49 export base_sbindir = "${base_prefix}/sbin"
  50 export base_libdir = "${base_prefix}/lib"
  51
  52 # Architecture independent paths
  53 export datadir = "${prefix}/share"
  54 export sysconfdir = "${base_prefix}/etc"
  55 export servicedir = "${base_prefix}/srv"
  56 export sharedstatedir = "${base_prefix}/com"
  57 export localstatedir = "${base_prefix}/var"
  58 export infodir = "${datadir}/info"
  59 export mandir = "${datadir}/man"
  60 export docdir = "${datadir}/doc"
  61
  62 # Architecture dependent paths
  63 export bindir = "${exec_prefix}/bin"
  64 export sbindir = "${exec_prefix}/sbin"
  65 export libexecdir = "${exec_prefix}/libexec"
  66 export libdir = "${exec_prefix}/lib"
  67 export includedir = "${exec_prefix}/include"
  68 export oldincludedir = "${exec_prefix}/include"
  69
  70 #
  71 # These must match the various bbclass layout definitions
  72 #
  73 base_bindir_native = "/bin"
  74 base_sbindir_native = "/sbin"
  75 sysconfdir_native = "/etc"
  76 base_libdir_native = "/lib"
  77 prefix_native = "/usr"
  78 bindir_native = "${prefix_native}/bin"
  79 sbindir_native = "${prefix_native}/sbin"
  80 includedir_native = "${prefix_native}/include"
  81 libdir_native = "${prefix_native}/lib"
  82 datadir_native = "${prefix_native}/share"
  83 bindir_cross = "/bin"
  84
  85 #
  86 # Cross recipes need to know about the target layout
  87 # := is used carefully here
  88 #
  89 target_datadir := "${datadir}"
  90
  91 ##################################################################
  92 # Architecture-dependent build variables.
  93 ##################################################################
  94
  95 BUILD_ARCH := "${@os.uname()[4]}"
  96 BUILD_OS := "${@os.uname()[0].lower()}"
  97 BUILD_VENDOR = ""
  98 BUILD_SYS = "${BUILD_ARCH}${BUILD_VENDOR}-${BUILD_OS}"
  99 BUILD_PREFIX = ""
 100 BUILD_CC_ARCH = ""
 101 BUILD_EXEEXT = ""
 102
 103 HOST_ARCH = "${TARGET_ARCH}"
 104 HOST_OS = "${TARGET_OS}"
 105 HOST_VENDOR = "${TARGET_VENDOR}"
 106 HOST_SYS = "${HOST_ARCH}${HOST_VENDOR}-${HOST_OS}"
 107 HOST_PREFIX = "${TARGET_PREFIX}"
 108 HOST_CC_ARCH = "${TARGET_CC_ARCH}"
 109 HOST_EXEEXT = ""
 110
 111 TARGET_ARCH ?= "INVALID"
 112 TARGET_OS = "INVALID"
 113 TARGET_VENDOR = "${BUILD_VENDOR}"
 114 TARGET_SYS = "${TARGET_ARCH}${TARGET_VENDOR}${@['-' + bb.data.getVar('TARGET_OS', d, 1), ''][bb.data.getVar('TARGET_OS', d, 1) in ('', 'custom')]}"
 115 TARGET_PREFIX = "${TARGET_SYS}-"
 116 TARGET_CC_ARCH = ""
 117 TARGET_EXEEXT = ""
 118
 119 SDK_ARCH ?= "${BUILD_ARCH}"
 120 SDK_OS ?= "${BUILD_OS}"
 121 SDK_VENDOR ?= "${BUILD_VENDOR}"
 122 SDK_SYS = "${SDK_ARCH}${SDK_VENDOR}${@['-' + bb.data.getVar('SDK_OS', d, 1), ''][bb.data.getVar('SDK_OS', d, 1) in ('', 'custom')]}"
 123 SDK_PREFIX = "${SDK_SYS}-"
 124 SDK_CC_ARCH ?= "${BUILD_CC_ARCH}"
 125 SDK_EXEEXT = ""
 126
 127 # A shortcut for the commonly used value
 128 EXEEXT = "${HOST_EXEEXT}"
 129
 130 BASE_PACKAGE_ARCH = "${HOST_ARCH}"
 131 PACKAGE_ARCH = "${BASE_PACKAGE_ARCH}"
 132 PACKAGE_EXTRA_ARCHS ?= ""
 133 MACHINE_ARCH = "${@oe.utils.ifelse(bool(d.getVar('MACHINE', True)), '${MACHINE}', \
 134                                    'BASE_PACKAGE_ARCH')}"
 135 PACKAGE_ARCHS = "all any noarch ${TARGET_ARCH} ${PACKAGE_EXTRA_ARCHS} ${MACHINE}"
 136
 137 MULTIMACH_ARCH = "${PACKAGE_ARCH}"
 138 MULTIMACH_TARGET_SYS = "${MULTIMACH_ARCH}${TARGET_VENDOR}-${TARGET_OS}"
 139 MULTIMACH_HOST_SYS = "${MULTIMACH_ARCH}${HOST_VENDOR}-${HOST_OS}"
 140 BASEPKG_HOST_SYS = "${BASE_PACKAGE_ARCH}${HOST_VENDOR}-${HOST_OS}"
 141 BASEPKG_TARGET_SYS = "${BASE_PACKAGE_ARCH}${TARGET_VENDOR}-${TARGET_OS}"
 142
 143 # select proper CPU to get binary locales generated
 144 QEMU_OPTIONS = ""
 145 QEMU_OPTIONS_iwmmxt  = "-cpu pxa270-c5"
 146 QEMU_OPTIONS_armv6   = "-cpu arm1136"
 147 QEMU_OPTIONS_armv6-novfp = "-cpu arm1136"
 148 QEMU_OPTIONS_armv7a   = "-cpu cortex-a8"
 149
 150 # default compression levels
 151 XZ_COMPRESSION_LEVEL ?= "-e -9"
 152 LZMA_COMPRESSION_LEVEL ?= "-e -9"
 153
 154 # default integrity check
 155 XZ_INTEGRITY_CHECK ?= "crc32"
 156
 157 ##################################################################
 158 # Date/time variables.
 159 ##################################################################
 160
 161 DATE := "${@time.strftime('%Y%m%d',time.gmtime())}"
 162 TIME := "${@time.strftime('%H%M%S',time.gmtime())}"
 163 DATETIME = "${DATE}${TIME}"
 164
 165 ##################################################################
 166 # Openembedded Software Prerequisites.
 167 ##################################################################
 168
 169 # python-native should be here but python relies on building
 170 # its own in staging
 171 ASSUME_PROVIDED = "\
 172     bc-native \
 173     bzip2-native \
 174     cvs-native \
 175     diffstat-native \
 176     patch-native \
 177     python-native-runtime \
 178     svn-native \
 179     texinfo-native \
 180     util-linux-native \
 181     "
 182 ASSUME_PROVIDED[type] = "list"
 183
 184 ##################################################################
 185 # Package default variables.
 186 ##################################################################
 187 PN = "${@bb.parse.BBHandler.vars_from_file('${FILE}', d)[0] or 'defaultpkgname'}"
 188 PV = "${@bb.parse.BBHandler.vars_from_file('${FILE}', d)[1] or '1.0'}"
 189 PR = "${@bb.parse.BBHandler.vars_from_file('${FILE}', d)[2] or 'r0'}"
 190 PF = "${PN}-${EXTENDPE}${PV}-${PR}"
 191 PE ?= "0"
 192 EXTENDPE = "${@int('${PE}') and '${PE}_' or ''}"
 193 EXTENDPEVER = "${@int('${PE}') and '${PE}:' or ''}"
 194 EXTENDPV = "${EXTENDPEVER}${PV}-${PR}${DISTRO_PR}"
 195 P = "${PN}-${PV}"
 196
 197 # Define a PR for kernels that machines can override so things like
 198 # modules get rebuilt
 199 MACHINE_KERNEL_PR = ""
 200
 201 # Base package name
 202 # Automatically derives "foo" from "foo-native", "foo-cross" or "foo-initial"
 203 # otherwise it is the same as PN and P
 204 SPECIAL_PKGSUFFIX = "-native -cross -initial -intermediate -nativesdk -crosssdk -cross-canadian -sdk"
 205 BPN = "${@base_prune_suffix('${PN}', '${SPECIAL_PKGSUFFIX}'.split(), d)}"
 206 BP = "${BPN}-${PV}"
 207
 208 # Package info.
 209
 210 SECTION = "base"
 211 PRIORITY = "optional"
 212 DESCRIPTION = "Version ${PV}-${PR} of package ${PN}"
 213 LICENSE = "unknown"
 214 MAINTAINER = "OpenEmbedded Team <openembedded-devel@lists.openembedded.org>"
 215 HOMEPAGE = "unknown"
 216
 217 # Package dependencies and provides.
 218
 219 # Ensure that -dev packages recommend the corresponding -dev packages of their
 220 # deps, and the same for -dbg.
 221 DEPCHAIN_PRE  = ""
 222 DEPCHAIN_PRE[type] = "list"
 223 DEPCHAIN_POST = "-dev -dbg"
 224 DEPCHAIN_POST[type] = "list"
 225
 226 DEPENDS = ""
 227 RDEPENDS = ""
 228 PROVIDES = ""
 229 PROVIDES_prepend = "${P} ${PF} ${PN} "
 230 RPROVIDES = ""
 231
 232 MULTI_PROVIDER_WHITELIST = "virtual/libintl"
 233
 234 SOLIBS = ".so.*"
 235 SOLIBS_darwin = ".*.dylib"
 236 SOLIBS_darwin8 = ".*.dylib"
 237 SOLIBS_darwin9 = ".*.dylib"
 238
 239 SOLIBSDEV = ".so"
 240 SOLIBSDEV_darwin = ".dylib"
 241 SOLIBSDEV_darwin8 = ".dylib"
 242 SOLIBSDEV_darwin9 = ".dylib"
 243
 244 PACKAGES = "${PN}-dbg ${PN} ${PN}-doc ${PN}-dev ${PN}-static ${PN}-locale"
 245 PACKAGES[type] = "list"
 246 #enable this when bitbake is upgraded to cope with ++ values in the field
 247 PACKAGES_DYNAMIC = "${PN}-locale-*"
 248 PACKAGES_DYNAMIC[type] = "list"
 249 FILES = ""
 250
 251 FILES_${PN} = "${bindir}/* ${sbindir}/* ${libexecdir}/* ${libdir}/lib*${SOLIBS} \
 252             ${sysconfdir} ${sharedstatedir} ${localstatedir} \
 253             ${base_bindir}/* ${base_sbindir}/* \
 254             ${base_libdir}/*${SOLIBS} \
 255             ${datadir}/${PN} ${libdir}/${PN}/* \
 256             ${datadir}/pixmaps ${datadir}/applications \
 257             ${datadir}/idl ${datadir}/omf ${datadir}/sounds \
 258             ${libdir}/bonobo/servers"
 259
 260 FILES_${PN}-doc = "${docdir} ${mandir} ${infodir} ${datadir}/gtk-doc \
 261             ${datadir}/gnome/help"
 262 SECTION_${PN}-doc = "doc"
 263
 264 FILES_${PN}-static = "${libdir}/*.a ${base_libdir}/*.a"
 265
 266 FILES_${PN}-dev = "${includedir} ${libdir}/lib*${SOLIBSDEV} ${libdir}/*.la \
 267                 ${libdir}/*.o ${libdir}/pkgconfig \
 268                 ${base_libdir}/*.o ${datadir}/aclocal ${datadir}/pkgconfig"
 269 SECTION_${PN}-dev = "devel"
 270 ALLOW_EMPTY_${PN}-dev = "1"
 271 RDEPENDS_${PN}-dev = "${PN} (= ${EXTENDPV})"
 272
 273 FILES_${PN}-dbg = "${bindir}/.debug ${sbindir}/.debug ${libexecdir}/.debug ${libdir}/.debug \
 274             ${base_bindir}/.debug ${base_sbindir}/.debug ${base_libdir}/.debug ${libdir}/${PN}/.debug \
 275             ${libdir}/matchbox-panel/.debug ${datadir}/gdb/autoload"
 276 SECTION_${PN}-dbg = "devel"
 277 ALLOW_EMPTY_${PN}-dbg = "1"
 278 RRECOMMENDS_${PN}-dbg = "${PN} (= ${EXTENDPV})"
 279
 280 FILES_${PN}-locale = "${datadir}/locale"
 281
 282 # file:// search paths
 283 FILE_DIRNAME = "${@os.path.dirname(bb.data.getVar('FILE', d))}"
 284 FILESPATHBASE = "${FILE_DIRNAME}"
 285 FILESPATHBASE[type] = "list"
 286 FILESPATHBASE[separator] = ":"
 287 FILESPATHPKG = "${PF}:${P}:${PN}:${BP}:${BPN}:files:."
 288 FILESPATHPKG[type] = "list"
 289 FILESPATHPKG[separator] = ":"
 290 FILESPATH = "${@':'.join(uniq(os.path.normpath(os.path.join(fp, p, o)) for fp in '${FILESPATHBASE}'.split(':') for p in '${FILESPATHPKG}'.split(':') for o in reversed([''] + filter(None, '${OVERRIDES}'.split(':')))))}"
 291 FILESPATH[type] = "list"
 292 FILESPATH[separator] = ":"
 293 FILESDIR = "${@bb.which(d.getVar('FILESPATH', 1), '.')}"
 294
 295 ##################################################################
 296 # General work and output directories for the build system.
 297 ##################################################################
 298
 299 TMPDIR = "${TOPDIR}/tmp"
 300 CACHE = "${TMPDIR}/cache${@['', '/' + str(bb.data.getVar('MACHINE', d, 1))][bool(bb.data.getVar('MACHINE', d, 1))]}"
 301 # The persistent cache should be shared by all builds
 302 PERSISTENT_DIR = "${TMPDIR}/cache"
 303 CO_DIR = "${DL_DIR}"
 304 CVSDIR = "${CO_DIR}/cvs"
 305 SVNDIR = "${CO_DIR}/svn"
 306 GITDIR = "${CO_DIR}/git"
 307 BZRDIR = "${CO_DIR}/bzr"
 308 HGDIR = "${CO_DIR}/hg"
 309
 310 STAMP = "${TMPDIR}/stamps/${MULTIMACH_TARGET_SYS}/${PF}"
 311 WORKDIR = "${TMPDIR}/work/${MULTIMACH_TARGET_SYS}/${PF}"
 312 T = "${WORKDIR}/temp"
 313 D = "${WORKDIR}/image"
 314 S = "${WORKDIR}/${BP}"
 315 B = "${S}"
 316
 317 STAGING_DIR = "${TMPDIR}/sysroots"
 318
 319 STAGING_DIR_NATIVE = "${STAGING_DIR}/${BUILD_SYS}"
 320 STAGING_BINDIR_NATIVE = "${STAGING_DIR_NATIVE}${bindir_native}"
 321 STAGING_SBINDIR_NATIVE = "${STAGING_DIR_NATIVE}${sbindir_native}"
 322 STAGING_BINDIR_CROSS  = "${STAGING_DIR_NATIVE}${prefix_native}/${BASE_PACKAGE_ARCH}${base_bindir_native}"
 323 STAGING_LIBDIR_NATIVE = "${STAGING_DIR_NATIVE}${libdir_native}"
 324 STAGING_INCDIR_NATIVE = "${STAGING_DIR_NATIVE}${includedir_native}"
 325 STAGING_ETCDIR_NATIVE = "${STAGING_DIR_NATIVE}${sysconfdir_native}"
 326 STAGING_DATADIR_NATIVE = "${STAGING_DIR_NATIVE}${datadir_native}"
 327
 328 # This should really be MULTIMACH_HOST_SYS but that breaks "all" and machine
 329 # specific packages - hack around it for now.
 330 STAGING_DIR_HOST = "${STAGING_DIR}/${BASEPKG_HOST_SYS}"
 331 STAGING_BINDIR = "${STAGING_DIR_HOST}${bindir}"
 332 STAGING_LIBDIR = "${STAGING_DIR_HOST}${libdir}"
 333 STAGING_INCDIR = "${STAGING_DIR_HOST}${includedir}"
 334 STAGING_ETCDIR = "${STAGING_DIR_HOST}${sysconfdir}"
 335 STAGING_DATADIR = "${STAGING_DIR_HOST}${datadir}"
 336 STAGING_EXECPREFIXDIR = "${STAGING_DIR_HOST}${exec_prefix}"
 337 STAGING_LOADER_DIR = "${STAGING_DIR_HOST}/loader"
 338 STAGING_FIRMWARE_DIR = "${STAGING_DIR_HOST}/firmware"
 339 STAGING_PYDIR = "${STAGING_DIR}/lib/python2.4"
 340
 341 # This should really be MULTIMACH_TARGET_SYS but that breaks "all" and machine
 342 # specific packages - hack around it for now.
 343 STAGING_DIR_TARGET = "${STAGING_DIR}/${BASEPKG_TARGET_SYS}"
 344 STAGING_DIR_JAVA = "${STAGING_DATADIR}/java"
 345
 346 STAGING_DIR_SDK = "${STAGING_DIR}/${SDK_SYS}"
 347
 348 # Setting DEPLOY_DIR outside of TMPDIR is helpful, when you are using
 349 # packaged staging and/or multimachine.
 350 DEPLOY_DIR ?= "${TMPDIR}/deploy"
 351 DEPLOY_DIR_TAR = "${DEPLOY_DIR}/tar"
 352 DEPLOY_DIR_IPK = "${DEPLOY_DIR}/ipk"
 353 DEPLOY_DIR_RPM = "${DEPLOY_DIR}/rpm"
 354 DEPLOY_DIR_DEB = "${DEPLOY_DIR}/deb"
 355 DEPLOY_DIR_IMAGE = "${DEPLOY_DIR}/images"
 356 DEPLOY_DIR_TOOLS = "${DEPLOY_DIR}/tools"
 357
 358 PKGDATA_DIR = "${TMPDIR}/pkgdata/${MULTIMACH_TARGET_SYS}"
 359
 360 SDK_NAME = "${DISTRO}/${TARGET_ARCH}"
 361 SDK_PATH = "/usr/local/${SDK_NAME}"
 362 SDKPATH = "${SDK_PATH}"
 363
 364 ##################################################################
 365 # Kernel info.
 366 ##################################################################
 367
 368 STAGING_KERNEL_DIR = "${STAGING_DIR}/${MULTIMACH_TARGET_SYS}/kernel"
 369
 370 ##################################################################
 371 # Specific image creation and rootfs population info.
 372 ##################################################################
 373
 374 IMAGE_ROOTFS = "${TMPDIR}/rootfs/${PN}"
 375 IMAGE_BASENAME = "${PN}"
 376 IMAGE_NAME = "${IMAGE_BASENAME}-${MACHINE}-${DATETIME}"
 377 IMAGE_LINK_NAME = "${IMAGE_BASENAME}-${MACHINE}"
 378 IMAGE_EXTRA_SPACE = 10240
 379
 380 UBI_VOLNAME ?= "${MACHINE}-rootfs"
 381
 382 IMAGE_CMD = ""
 383 IMAGE_CMD_jffs2 = "mkfs.jffs2 -x lzo --root=${IMAGE_ROOTFS} --faketime --output=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2 ${EXTRA_IMAGECMD}"
 384 IMAGE_CMD_yaffs2 = "mkyaffs2image ${EXTRA_IMAGECMD} ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.yaffs2"
 385 IMAGE_CMD_cramfs = "mkcramfs ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cramfs ${EXTRA_IMAGECMD}"
 386 IMAGE_CMD_ext2 = "genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext2 ${EXTRA_IMAGECMD}"
 387 IMAGE_CMD_ext2.gz = "install -d ${DEPLOY_DIR_IMAGE}/tmp.gz ; genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext2 ${EXTRA_IMAGECMD}; gzip -f -9 ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext2; mv ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext2.gz ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext2.gz"
 388 IMAGE_CMD_ext2.bz2 = "install -d ${DEPLOY_DIR_IMAGE}/tmp.bz2 ; genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext2 ${EXTRA_IMAGECMD}; bzip2 -f -9 ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext2; mv ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext2.bz2 ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext2.bz2"
 389 IMAGE_CMD_ext3 = "genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3 ${EXTRA_IMAGECMD}; tune2fs -j ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3"
 390 IMAGE_CMD_ext3.gz = "install -d ${DEPLOY_DIR_IMAGE}/tmp.gz ; genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext3 ${EXTRA_IMAGECMD}; tune2fs -j ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext3; gzip -f -9 ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext3; mv ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext3.gz ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3.gz"
 391 IMAGE_CMD_ext3.bz2 = "install -d ${DEPLOY_DIR_IMAGE}/tmp.bz2 ; genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext3 ${EXTRA_IMAGECMD}; tune2fs -j ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext3; bzip2 -f -9 ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext3; mv ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext3.bz2 ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3.bz2"
 392 IMAGE_CMD_ext4 = "genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext4 ${EXTRA_IMAGECMD}; tune2fs -O extents,uninit_bg,dir_index,has_journal ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext4; set +e; e2fsck -yfDC0 ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext4;chk=$?; set -e; case $chk in 0|1|2);;*)exit $chk;;esac;"
 393 IMAGE_CMD_ext4.gz = "install -d ${DEPLOY_DIR_IMAGE}/tmp.gz ; genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext4 ${EXTRA_IMAGECMD}; tune2fs -O extents,uninit_bg,dir_index,has_journal ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext4; set +e;e2fsck -yfDC0 ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext4;chk=$?; set -e; case $chk in 0|1|2);;*)exit $chk;;esac; gzip -f -9 ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext4; mv ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext4.gz ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext4.gz"
 394 IMAGE_CMD_ext4.bz2 = "install -d ${DEPLOY_DIR_IMAGE}/tmp.bz2 ; genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext4 ${EXTRA_IMAGECMD}; tune2fs -O extents,uninit_bg,dir_index,has_journal ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext4; set +e; e2fsck -yfDC0 ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext4;chk=$?; set -e; case $chk in 0|1|2);;*)exit $chk;;esac; bzip2 -f -9 ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext4; mv ${DEPLOY_DIR_IMAGE}/tmp.bz2/${IMAGE_NAME}.rootfs.ext4.bz2 ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext4.bz2"
 395 IMAGE_CMD_ext4.xz = "install -d ${DEPLOY_DIR_IMAGE}/tmp.xz; genext2fs -i 4096 -b ${ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/tmp.xz/${IMAGE_NAME}.rootfs.ext4 ${EXTRA_IMAGECMD}; tune2fs -O extents,uninit_bg,dir_index,has_journal ${DEPLOY_DIR_IMAGE}/tmp.xz/${IMAGE_NAME}.rootfs.ext4; set +e; e2fsck -yfDC0 ${DEPLOY_DIR_IMAGE}/tmp.xz/${IMAGE_NAME}.rootfs.ext4;chk=$?; set -e; case $chk in 0|1|2);;*)exit $chk;;esac; xz -c ${XZ_COMPRESSION_LEVEL} --check=${XZ_INTEGRITY_CHECK} ${DEPLOY_DIR_IMAGE}/tmp.xz/${IMAGE_NAME}.rootfs.ext4 > ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext4.xz ; rm -f ${DEPLOY_DIR_IMAGE}/tmp.xz/${IMAGE_NAME}.rootfs.ext4 ; rmdir ${DEPLOY_DIR_IMAGE}/tmp.xz"
 396
 397 IMAGE_CMD_squashfs = "mksquashfs ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.squashfs ${EXTRA_IMAGECMD} -noappend"
 398 IMAGE_CMD_squashfs-lzma = "mksquashfs ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.squashfs-lzma ${EXTRA_IMAGECMD} -noappend -comp lzma"
 399 IMAGE_CMD_tar = "cd ${IMAGE_ROOTFS} && tar -cvf ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.tar ."
 400 IMAGE_CMD_tar.gz = "cd ${IMAGE_ROOTFS} && tar -zcvf ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.tar.gz ."
 401 IMAGE_CMD_tar.bz2 = "cd ${IMAGE_ROOTFS} && tar -jcvf ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.tar.bz2 ."
 402 IMAGE_CMD_tar.xz = "cd ${IMAGE_ROOTFS} && tar --xz -cvf ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.tar.xz ."
 403 IMAGE_CMD_cpio = "cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio) ${EXTRA_IMAGECMD}"
 404 IMAGE_CMD_cpio.gz = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | gzip -c -9 >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz) ${EXTRA_IMAGECMD}"
 405 IMAGE_CMD_cpio.xz = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | xz -c ${XZ_COMPRESSION_LEVEL} --check=${XZ_INTEGRITY_CHECK} > ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.xz) ${EXTRA_IMAGECMD}"
 406 IMAGE_CMD_cpio.gz.u-boot = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | gzip -c -9 >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz) ${EXTRA_IMAGECMD}; mkimage -A ${UBOOT_ARCH} -O linux -T ramdisk -C gzip -n ${IMAGE_NAME} -d ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz.u-boot"
 407 IMAGE_CMD_cpio.lzma = "type cpio >/dev/null; cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | lzma -c ${LZMA_COMPRESSION_LEVEL} >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.lzma) ${EXTRA_IMAGECMD}"
 408 IMAGE_CMD_ubi = "echo \[ubifs\] > ubinize.cfg ; echo mode=ubi >> ubinize.cfg ; echo image=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubifs.img >> ubinize.cfg ; echo vol_id=0 >> ubinize.cfg ; echo vol_type=dynamic >> ubinize.cfg ; echo vol_name=${UBI_VOLNAME} >> ubinize.cfg ; echo vol_flags=autoresize >> ubinize.cfg;mkfs.ubifs -r ${IMAGE_ROOTFS} -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubifs.img ${MKUBIFS_ARGS} && ubinize -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubi ${UBINIZE_ARGS} ubinize.cfg"
 409 IMAGE_CMD_ubifs = "mkfs.ubifs -r ${IMAGE_ROOTFS} -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubifs.img ${MKUBIFS_ARGS}"
 410
 411 EXTRA_IMAGECMD = ""
 412 EXTRA_IMAGECMD_jffs2 = ""
 413 EXTRA_IMAGECMD_yaffs2 = "1"
 414 EXTRA_IMAGECMD_squashfs = ""
 415 EXTRA_IMAGECMD_squashfs-lzma = ""
 416 EXTRA_IMAGECMD_cpio = ""
 417 EXTRA_IMAGECMD_cpio.gz = ""
 418 EXTRA_IMAGECMD_cpio.lzma = ""
 419 EXTRA_IMAGECMD_ubi = ""
 420 EXTRA_IMAGECMD_ubifs = ""
 421
 422 IMAGE_DEPENDS = ""
 423 IMAGE_DEPENDS_tar.xz = "tar-native xz-native"
 424 IMAGE_DEPENDS_jffs2 = "mtd-utils-native"
 425 IMAGE_DEPENDS_yaffs2 = "yaffs2-utils-native"
 426 IMAGE_DEPENDS_cramfs = "cramfs-native"
 427 IMAGE_DEPENDS_ext2 = "genext2fs-native"
 428 IMAGE_DEPENDS_ext2.gz = "genext2fs-native"
 429 IMAGE_DEPENDS_ext2.bz2 = "genext2fs-native"
 430 IMAGE_DEPENDS_ext3 = "genext2fs-native e2fsprogs-native"
 431 IMAGE_DEPENDS_ext3.gz = "genext2fs-native e2fsprogs-native"
 432 IMAGE_DEPENDS_ext3.bz2 = "genext2fs-native e2fsprogs-native"
 433 IMAGE_DEPENDS_ext4 = "genext2fs-native e2fsprogs-native"
 434 IMAGE_DEPENDS_ext4.gz = "genext2fs-native e2fsprogs-native"
 435 IMAGE_DEPENDS_ext4.bz2 = "genext2fs-native e2fsprogs-native"
 436 IMAGE_DEPENDS_ext4.xz = "genext2fs-native e2fsprogs-native xz-native"
 437 IMAGE_DEPENDS_cpio.gz.u-boot = "u-boot-mkimage-native"
 438 IMAGE_DEPENDS_cpio.lzma = "lzma-native"
 439 IMAGE_DEPENDS_cpio.xz = "xz-native"
 440 IMAGE_DEPENDS_squashfs = "squashfs-tools-native"
 441 IMAGE_DEPENDS_squashfs-lzma = "squashfs-tools-native"
 442 IMAGE_DEPENDS_ubi = "mtd-utils-native"
 443 IMAGE_DEPENDS_ubifs = "mtd-utils-native"
 444
 445 EXTRA_IMAGEDEPENDS = ""
 446
 447 ##################################################################
 448 # Toolchain info.
 449 ##################################################################
 450
 451 # This variable is needed to set to 'yes' in conjuction with
 452 # PREFERRED_VERSION for libtool when choosing libtool >= 2.4
 453 # by default this is unset and should be so for libtools < 2.4
 454
 455 LIBTOOL_HAS_SYSROOT ?= "no"
 456 LIBTOOL_HAS_SYSROOT[type] = "boolean"
 457
 458 BBPATH_BIN = "${@':'.join('%s/bin' % path for path in '${BBPATH}'.split(':'))}"
 459 PATH_prepend = "${BBPATH_BIN}:${STAGING_BINDIR_CROSS}:${STAGING_DIR_NATIVE}${sbindir_native}:${STAGING_BINDIR_NATIVE}:${STAGING_DIR_NATIVE}${base_sbindir_native}:${STAGING_DIR_NATIVE}/${base_bindir_native}:"
 460 PATH[type] = "list"
 461 PATH[separator] = ":"
 462 export PATH
 463
 464 ##################################################################
 465 # Build utility info.
 466 ##################################################################
 467
 468 CCACHE ?= ""
 469 TOOLCHAIN_OPTIONS = " --sysroot=${STAGING_DIR_TARGET}"
 470 TOOLCHAIN_PATH ?= "${STAGING_DIR_NATIVE}${prefix_native}/${BASE_PACKAGE_ARCH}"
 471 TOOLCHAIN_SYSPATH ?= "${TOOLCHAIN_PATH}/${TARGET_SYS}"
 472
 473 export CC = "${CCACHE}${HOST_PREFIX}gcc ${HOST_CC_ARCH}${TOOLCHAIN_OPTIONS}"
 474 export CXX = "${CCACHE}${HOST_PREFIX}g++ ${HOST_CC_ARCH}${TOOLCHAIN_OPTIONS}"
 475 export F77 = "${CCACHE}${HOST_PREFIX}g77 ${HOST_CC_ARCH}${TOOLCHAIN_OPTIONS}"
 476 export CPP = "${HOST_PREFIX}gcc -E${TOOLCHAIN_OPTIONS}"
 477 export LD = "${HOST_PREFIX}ld${TOOLCHAIN_OPTIONS}"
 478 export CCLD = "${CC}"
 479 export AR = "${HOST_PREFIX}ar"
 480 export AS = "${HOST_PREFIX}as"
 481 export RANLIB = "${HOST_PREFIX}ranlib"
 482 export STRIP = "${HOST_PREFIX}strip"
 483 export OBJCOPY = "${HOST_PREFIX}objcopy"
 484 export OBJDUMP = "${HOST_PREFIX}objdump"
 485 export NM = "${HOST_PREFIX}nm"
 486 PYTHON = "${@sys.executable}"
 487
 488 export BUILD_CC = "${CCACHE}${BUILD_PREFIX}gcc ${BUILD_CC_ARCH}"
 489 export BUILD_CXX = "${CCACHE}${BUILD_PREFIX}g++ ${BUILD_CC_ARCH}"
 490 export BUILD_F77 = "${CCACHE}${BUILD_PREFIX}g77 ${BUILD_CC_ARCH}"
 491 export BUILD_CPP = "${BUILD_PREFIX}cpp"
 492 export BUILD_LD = "${BUILD_PREFIX}ld"
 493 export BUILD_CCLD = "${BUILD_PREFIX}gcc"
 494 export BUILD_AR = "${BUILD_PREFIX}ar"
 495 export BUILD_RANLIB = "${BUILD_PREFIX}ranlib"
 496 export BUILD_STRIP = "${BUILD_PREFIX}strip"
 497
 498 export MAKE = "make"
 499 EXTRA_OEMAKE = "-e MAKEFLAGS="
 500
 501 ##################################################################
 502 # Patch handling.
 503 ##################################################################
 504 PATCHTOOL = 'quilt'
 505 PATCHRESOLVE = 'noop'
 506
 507 ##################################################################
 508 # Build flags and options.
 509 ##################################################################
 510
 511 export BUILD_CPPFLAGS = "-isystem${STAGING_INCDIR_NATIVE}"
 512 export CPPFLAGS = "${TARGET_CPPFLAGS}"
 513 export TARGET_CPPFLAGS = ""
 514 export SDK_CPPFLAGS = "-isystem${STAGING_DIR_SDK}${includedir} -isystem${STAGING_DIR_HOST}${includedir}"
 515
 516 export BUILD_CFLAGS = "${BUILD_CPPFLAGS} ${BUILD_OPTIMIZATION}"
 517 export CFLAGS = "${TARGET_CFLAGS}"
 518 export TARGET_CFLAGS = "${TARGET_CPPFLAGS} ${SELECTED_OPTIMIZATION}"
 519 export SDK_CFLAGS = "${SDK_CPPFLAGS} ${SELECTED_OPTIMIZATION}"
 520
 521 export BUILD_CXXFLAGS = "${BUILD_CFLAGS} -fpermissive"
 522 export CXXFLAGS = "${TARGET_CXXFLAGS}"
 523 export TARGET_CXXFLAGS = "${TARGET_CFLAGS} -fpermissive"
 524 export SDK_CXXFLAGS = "${SDK_CFLAGS} -fpermissive"
 525
 526 export BUILD_LDFLAGS = "-L${STAGING_LIBDIR_NATIVE} \
 527                         -Wl,-rpath-link,${STAGING_LIBDIR_NATIVE} \
 528                         -Wl,-rpath,${STAGING_LIBDIR_NATIVE} -Wl,-O1"
 529
 530 export LDFLAGS = "${TARGET_LDFLAGS}"
 531 export TARGET_LDFLAGS = "-Wl,-O1 ${TARGET_LINK_HASH_STYLE}"
 532
 533 export SDK_LDFLAGS = "-L${STAGING_DIR_SDK}${libdir} \
 534                          -Wl,-rpath-link,${STAGING_DIR_SDK}${libdir} \
 535                          -Wl,-O1"
 536
 537 export LC_ALL = "C"
 538
 539 # Which flags to leave by strip-flags() in bin/build/oebuild.sh ?
 540 ALLOWED_FLAGS = "-O -mcpu -march -pipe"
 541
 542 # Pass parallel make options to the compile task only
 543 EXTRA_OEMAKE_prepend_task_do_compile = "${PARALLEL_MAKE} "
 544 EXTRA_OEMAKE_prepend_task-compile = "${PARALLEL_MAKE} "
 545
 546 ##################################################################
 547 # Optimization flags.
 548 ##################################################################
 549
 550 DEBUG_FLAGS = "-g"
 551 FULL_OPTIMIZATION = "-fexpensive-optimizations -fomit-frame-pointer -frename-registers -O2"
 552 DEBUG_OPTIMIZATION = "-O -fno-omit-frame-pointer ${DEBUG_FLAGS}"
 553 SELECTED_OPTIMIZATION = "${@bb.data.getVar(['FULL_OPTIMIZATION', 'DEBUG_OPTIMIZATION'][bb.data.getVar('DEBUG_BUILD', d, 1) == '1'], d, 1)}"
 554 BUILD_OPTIMIZATION = "-O2 ${DEBUG_FLAGS}"
 555
 556 ##################################################################
 557 # Bootstrap stuff.
 558 ##################################################################
 559
 560 BOOTSTRAP_EXTRA_RDEPENDS = ""
 561 BOOTSTRAP_EXTRA_RRECOMMENDS = ""
 562
 563 ##################################################################
 564 # Palmtop stuff.
 565 ##################################################################
 566
 567 export QTDIR = "${STAGING_DIR_HOST}/qt2"
 568 export QPEDIR = "${STAGING_DIR_HOST}"
 569 export OPIEDIR = "${STAGING_DIR_HOST}"
 570 export palmtopdir = "${libdir}/opie"
 571 export palmqtdir = "${palmtopdir}"
 572
 573 ##################################################################
 574 # Download locations and utilities.
 575 ##################################################################
 576
 577 OE_STRICT_CHECKSUMS ?= "1"
 578
 579 ADOBE_MIRROR = "http://fpdownload.macromedia.com/get/flashplayer/current/"
 580 APACHE_MIRROR = "http://archive.apache.org/dist"
 581 DEBIAN_MIRROR = "ftp://ftp.debian.org/debian/pool"
 582 E_MIRROR = "http://download.enlightenment.org/releases"
 583 E_SVN = "svn://svn.enlightenment.org/svn/e"
 584 FREEBSD_MIRROR = "ftp://ftp.freebsd.org/pub/FreeBSD/"
 585 FREEDESKTOP_CVS = "cvs://anoncvs:anoncvs@anoncvs.freedesktop.org/cvs"
 586 FREESMARTPHONE_GIT = "git://git.freesmartphone.org"
 587 GENTOO_MIRROR = "http://distfiles.gentoo.org/distfiles"
 588 GNOME_GIT = "git://git.gnome.org"
 589 GNOME_MIRROR = "http://ftp.gnome.org/pub/GNOME/sources"
 590 GNU_MIRROR = "ftp://ftp.gnu.org/gnu"
 591 GPE_MIRROR = "http://gpe.linuxtogo.org/download/source"
 592 GPE_EXTRA_SVN = "svn://projects.linuxtogo.org/svn/gpe/trunk/extra;module=${PN}"
 593 GPE_SVN = "svn://projects.linuxtogo.org/svn/gpe/trunk/base;module=${PN}"
 594 GPEPHONE_MIRROR = "http://gpephone.linuxtogo.org/download/gpephone"
 595 GPEPHONE_SVN = "svn://projects.linuxtogo.org/svn/gpephone/trunk/source;module=${PN}"
 596 HANDHELDS_CVS = "cvs://anoncvs:anoncvs@anoncvs.handhelds.org/cvs"
 597 KERNELORG_MIRROR = "http://kernel.org"
 598 OPIE_GIT = "git://gitorious.org/opie/opie.git"
 599 SAVANNAH_MIRROR = "http://download.savannah.gnu.org/"
 600 SOURCEFORGE_MIRROR = "http://downloads.sourceforge.net"
 601 XLIBS_MIRROR = "http://xlibs.freedesktop.org/release"
 602 XORG_MIRROR = "http://xorg.freedesktop.org/releases"
 603
 604 # You can use the mirror of your country to get faster downloads by putting
 605 #  export DEBIAN_MIRROR = "ftp://ftp.de.debian.org/debian/pool"
 606 #     into your local.conf
 607
 608 FETCHCMD_svn = "/usr/bin/env svn --non-interactive"
 609 FETCHCMD_cvs = "/usr/bin/env cvs"
 610 FETCHCMD_wget = "/usr/bin/env wget -t 5 --no-check-certificate"
 611 FETCHCMD_bzr = "/usr/bin/env bzr"
 612 FETCHCMD_hg = "/usr/bin/env hg"
 613
 614 FETCHCOMMAND = "ERROR, this must be a BitBake bug"
 615 FETCHCOMMAND_wget = "/usr/bin/env 'PATH=${PATH}' wget -t 5 --passive-ftp --no-check-certificate -P ${DL_DIR} '${URI}'"
 616 FETCHCOMMAND_cvs = "/usr/bin/env 'PATH=${PATH}' cvs '-d${CVSROOT}' co ${CVSCOOPTS} ${CVSMODULE}"
 617 FETCHCOMMAND_svn = "/usr/bin/env svn co --non-interactive ${SVNCOOPTS} ${SVNROOT} ${SVNMODULE}"
 618 RESUMECOMMAND = "ERROR, this must be a BitBake bug"
 619 RESUMECOMMAND_wget = "/usr/bin/env 'PATH=${PATH}' wget -c -t 5 --passive-ftp --no-check-certificate -P ${DL_DIR} '${URI}'"
 620 UPDATECOMMAND = "ERROR, this must be a BitBake bug"
 621 UPDATECOMMAND_cvs = "/usr/bin/env 'PATH=${PATH}' cvs -d${CVSROOT} update -d -P ${CVSCOOPTS}"
 622 UPDATECOMMAND_svn = "/usr/bin/env svn update --non-interactive --force --accept theirs-full ${SVNCOOPTS}"
 623 SRCDATE = "${DATE}"
 624 SRCREV = "1"
 625 SRCPV = "${@bb.fetch.get_srcrev(d)}"
 626 AUTOREV = "${SRCPV}"
 627
 628 # For now disable autoincrement of revision counter in SRCPV, whoever wants it, should enable it in local.conf or distro config
 629 # Revision counter is incremented only locally (bad for multiple builders filling shared feeds), LOCALCOUNT can be used to maintain
 630 # counter globally in OE metadata (LOCALCOUNT value set in recipe).
 631 # Make sure you disable it, if you want always upgradable paths for git recipes without bumping LOCALCOUNT with every SRCREV change
 632 # or if you're using AUTOREV feature.
 633 BB_LOCALCOUNT_OVERRIDE = "1"
 634
 635 # Value for revision counter in GIT recipes (NNNN in PV="1.0+gitrNNNN+a7401084a72285c8d3485bacf4eed593f303b1b7-r4.4")
 636 LOCALCOUNT = "0"
 637 LOCALCOUNT[type] = "integer"
 638
 639 SRC_URI = "file://${FILE}"
 640 SRC_URI[type] = "list"
 641
 642 FAKEROOT = "fakeroot"
 643
 644 ##################################################################
 645 # UI/Interaction Configuration
 646 ##################################################################
 647
 648 SHELLRCCMD = "bash --rcfile $TERMRCFILE"
 649 export SHELLCMDS = "${SHELLRCCMD}"
 650 # Some common terminal programs to choose from
 651 GNOME_TERMCMD = 'gnome-terminal --disable-factory -t "$TERMWINDOWTITLE"'
 652 GNOME_TERMCMDRUN = '${GNOME_TERMCMD} -x $SHELLCMDS'
 653 SCREEN_TERMCMD = 'screen -D -m -t "$TERMWINDOWTITLE"'
 654 SCREEN_TERMCMDRUN = '${SCREEN_TERMCMD} $SHELLCMDS'
 655 XTERM_TERMCMD = 'xterm -T "$TERMWINDOWTITLE"'
 656 XTERM_TERMCMDRUN = '${XTERM_TERMCMD} -e $SHELLCMDS'
 657 KONSOLE_TERMCMD = 'konsole -T "$TERMWINDOWTITLE"'
 658 KONSOLE_TERMCMDRUN = '${KONSOLE_TERMCMD} -e $SHELLCMDS'
 659
 660 # Set a default
 661 TERMCMD ?= "${GNOME_TERMCMD}"
 662 TERMCMDRUN ?= "${GNOME_TERMCMDRUN}"
 663
 664 ##################################################################
 665 # Miscellaneous utilities.
 666 ##################################################################
 667
 668 MKTEMPDIRCMD = "mktemp -d -q ${TMPBASE}"
 669 MKTEMPCMD = "mktemp -q ${TMPBASE}"
 670
 671 # GNU patch tries to be intellgent about checking out read-only files from
 672 # a RCS, which freaks out those special folks with active Perforce clients
 673 # the following makes patch ignore RCS:
 674
 675 export PATCH_GET="0"
 676
 677 # Program to be used to build ipkg packages
 678
 679 OPKGBUILDCMD = "opkg-build -o 0 -g 0"
 680
 681 ##################################################################
 682 # Not sure about the rest of this yet.
 683 ##################################################################
 684
 685 # slot - currently unused by OE. portage remnants
 686 SLOT = "0"
 687
 688 # Other
 689 export HOSTNAME := "${@os.uname()[1]}"
 690
 691 PKG_CONFIG_DIR = "${STAGING_LIBDIR}/pkgconfig"
 692 export PKG_CONFIG_PATH = "${STAGING_LIBDIR}/pkgconfig:${STAGING_DATADIR}/pkgconfig"
 693 PKG_CONFIG_PATH .= ":${STAGING_LIBDIR_NATIVE}/pkgconfig:${STAGING_DATADIR_NATIVE}/pkgconfig"
 694 PKG_CONFIG_PATH[type] = "list"
 695 PKG_CONFIG_PATH[separator] = ":"
 696
 697 export PKG_CONFIG_SYSROOT_DIR = "${STAGING_DIR}/${BASE_PACKAGE_ARCH}${TARGET_VENDOR}-${TARGET_OS}"
 698 export PKG_CONFIG_DISABLE_UNINSTALLED = "yes"
 699
 700 export XDG_DATA_DIRS = "${STAGING_DATADIR}"
 701
 702 export QMAKE_MKSPEC_PATH = "${STAGING_DATADIR_NATIVE}/qmake"
 703 export STAGING_SIPDIR = "${STAGING_DATADIR_NATIVE}/sip"
 704 export STAGING_IDLDIR = "${STAGING_DATADIR}/idl"
 705
 706 # library package naming
 707 AUTO_LIBNAME_PKGS = "${PACKAGES}"
 708
 709 # Globally toggle certain dependencies
 710 ENTERPRISE_DISTRO ?= "0"
 711
 712 # Pre-build configuration output
 713
 714 BUILDCFG_HEADER = "Build Configuration:"
 715 BUILDCFG_VARS ?= "BB_VERSION METADATA_BRANCH METADATA_REVISION TARGET_ARCH TARGET_OS MACHINE DISTRO DISTRO_VERSION"
 716 BUILDCFG_VARS[type] = "list"
 717 BUILDCFG_VARS_append_arm = " TARGET_FPU"
 718 BUILDCFG_VARS_append_armeb = " TARGET_FPU"
 719 BUILDCFG_NEEDEDVARS ?= "TARGET_ARCH TARGET_OS"
 720 BUILDCFG_NEEDEDVARS[type] = "list"
 721
 722 ###
 723 ### Config file processing
 724 ###
 725
 726 # Overrides are processed left to right, so the ones that are named later take precedence.
 727 # You generally want them to go from least to most specific.
 728 MACHINE_OVERRIDES ?= ""
 729 OVERRIDES = "pn-${PN}:fail-fast:build-${BUILD_OS}:${TARGET_ARCH}:${TARGET_OS}:${DISTRO}:\
 730 ${@[':'.join(d.getVar('MACHINE_OVERRIDES', True).split())+':',''][d.getVar('MACHINE_OVERRIDES', True).strip() == '']}\
 731 ${MACHINE}:local"
 732 OVERRIDES[type] = "list"
 733 OVERRIDES[separator] = ":"
 734
 735 ##################################################################
 736 # Include the rest of the config files.
 737 ##################################################################
 738
 739 include conf/site.conf
 740 include conf/auto.conf
 741 include conf/local.conf
 742 # USERDISTRO should always contain original DISTRO value as set by user
 743 # If a distro config overrides DISTRO for whatever reason (e.g. to get
 744 # overrides like it wants), USERDISTRO must be reassigned with := first
 745 USERDISTRO = "${DISTRO}"
 746 include conf/build/${BUILD_SYS}.conf
 747 include conf/target/${TARGET_SYS}.conf
 748 include conf/machine/${MACHINE}.conf
 749 include conf/distro/${DISTRO}.conf
 750 include conf/documentation.conf
 751 require conf/sanity.conf
 752 require conf/abi_version.conf
 753 require conf/enterprise.conf
 754 require conf/compatibility-providers.conf
 755
 756 ##################################################################
 757 # Weak variables (usually to retain backwards compatibility)
 758 ##################################################################
 759
 760 DL_DIR ?= "${TMPDIR}/downloads"
 761 PSTAGE_DIR ?= "${TMPDIR}/pstage"
 762 IMAGE_FSTYPES ?= "tar.gz"
 763 PCMCIA_MANAGER ?= "pcmcia-cs"
 764 DEFAULT_TASK_PROVIDER ?= "task-base"
 765 MACHINE_TASK_PROVIDER ?= "${DEFAULT_TASK_PROVIDER}"
 766 IMAGE_ROOTFS_SIZE ?= "65536"
 767 IMAGE_ROOTFS_SIZE[type] = "integer"
 768 IMAGE_ROOTFS_SIZE_ext2 ?= "65536"
 769 IMAGE_ROOTFS_SIZE_ext2.gz ?= "65536"
 770 IMAGE_ROOTFS_SIZE_ext3 ?= "65536"
 771 IMAGE_ROOTFS_SIZE_ext3.gz ?= "65536"
 772 DISTRO_PR ?= ""
 773
 774 # Forcefully set CACHE now so future changes to things like
 775 # MACHINE don't change the path to the cache
 776 CACHE := "${CACHE}"
 777
 778 # Default to disabling packaged staging code
 779 export PSTAGING_ACTIVE = "0"
 780 PSTAGING_ACTIVE[type] = "boolean"
 781
 782 ##################################################################
 783 # Magic Cookie for SANITY CHECK
 784 ##################################################################
 785 OES_BITBAKE_CONF = "1"
 786
 787 ##################################################################
 788 # Machine properties and task-base stuff
 789 ##################################################################
 790
 791 MACHINE_FEATURES ?= "kernel26"
 792 DISTRO_FEATURES ?= ""
 793 # Add thumb-interwork to feature list if selected machine supports it.
 794 DISTRO_FEATURES += ' ${@["", "thumb-interwork"][bb.data.getVar('THUMB_INTERWORK', d, 1) == "yes"]}'
 795
 796 # This is used to limit what packages goes into images built, so set big by default
 797 ROOT_FLASH_SIZE ?= "256"
 798 ROOT_FLASH_SIZE[type] = "integer"
 799
 800 MACHINE_GUI_CLASS ?= "smallscreen"
 801 MACHINE_GUI_CLASS[type] = "choice"
 802 MACHINE_GUI_CLASS[choices] = "bigscreen smallscreen"
 803 # GUI_MACHINE_CLASS is deprecated, please use MACHINE_GUI_CLASS instead
 804 GUI_MACHINE_CLASS ?= "${MACHINE_GUI_CLASS}"
 805 MACHINE_DISPLAY_WIDTH_PIXELS ?= "240"
 806 MACHINE_DISPLAY_WIDTH_PIXELS[type] = "integer"
 807 MACHINE_DISPLAY_HEIGHT_PIXELS ?= "320"
 808 MACHINE_DISPLAY_HEIGHT_PIXELS[type] = "integer"
 809 MACHINE_DISPLAY_ORIENTATION ?= "0"
 810 MACHINE_DISPLAY_ORIENTATION[type] = "boolean"
 811 MACHINE_DISPLAY_BPP ?= "16"
 812 MACHINE_DISPLAY_BPP[type] = "integer"
 813
 814 DISTRO_EXTRA_RDEPENDS ?= ""
 815 DISTRO_EXTRA_RRECOMMENDS ?= ""
 816 MACHINE_EXTRA_RDEPENDS ?= ""
 817 MACHINE_EXTRA_RRECOMMENDS ?= ""
 818 MACHINE_ESSENTIAL_EXTRA_RDEPENDS ?= ""
 819 MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS ?= ""
 820
 821 DISTRO_FEATURES[type] = "list"
 822 MACHINE_FEATURES[type] = "list"
 823
 824 COMBINED_FEATURES = "\
 825     ${@base_both_contain('DISTRO_FEATURES', 'MACHINE_FEATURES', 'alsa', d)} \
 826     ${@base_both_contain('DISTRO_FEATURES', 'MACHINE_FEATURES', 'bluetooth', d)} \
 827     ${@base_both_contain('DISTRO_FEATURES', 'MACHINE_FEATURES', 'ext2', d)} \
 828     ${@base_both_contain('DISTRO_FEATURES', 'MACHINE_FEATURES', 'vfat', d)} \
 829     ${@base_both_contain('DISTRO_FEATURES', 'MACHINE_FEATURES', 'irda', d)} \
 830     ${@base_both_contain('DISTRO_FEATURES', 'MACHINE_FEATURES', 'pcmcia', d)} \
 831     ${@base_both_contain('DISTRO_FEATURES', 'MACHINE_FEATURES', 'pci', d)} \
 832     ${@base_both_contain('DISTRO_FEATURES', 'MACHINE_FEATURES', 'usbgadget', d)} \
 833     ${@base_both_contain('DISTRO_FEATURES', 'MACHINE_FEATURES', 'usbhost', d)} \
 834     ${@base_both_contain('DISTRO_FEATURES', 'MACHINE_FEATURES', 'wifi', d)}"
 835
 836 # We want madwifi if all of the following are true:
 837 # - distro has pci, wifi, and madwifi in its features
 838 # - machine has pci in its features
 839 COMBINED_FEATURES += "${@base_ifelse( \
 840     base_contains('DISTRO_FEATURES', ('pci', 'wifi', 'madwifi'), True, False, d) and \
 841     base_contains('MACHINE_FEATURES', 'pci', True, False, d), \
 842     'madwifi', '')}"
 843
 844 # We want hostap if all of the following are true:
 845 # - 'wifi' and 'hostap' are in distro features
 846 # - either 'pci' or 'pcmcia' are in both distro and machine features
 847 COMBINED_FEATURES += "${@base_ifelse( \
 848     base_contains('DISTRO_FEATURES', ('wifi', 'hostap'), True, False, d) and \
 849     ((base_contains('MACHINE_FEATURES', 'pci', True, False, d) and \
 850       base_contains('DISTRO_FEATURES', 'pci', True, False, d)) or \
 851      (base_contains('MACHINE_FEATURES', 'pcmcia', True, False, d) and \
 852       base_contains('DISTRO_FEATURES', 'pcmcia', True, False, d))), \
 853     'hostap', '')}"
 854 COMBINED_FEATURES[type] = "list"
 855
 856 # Make sure MACHINE isn't exported
 857 # (breaks binutils at least)
 858 MACHINE[unexport] = "1"
 859
 860 # Make sure TARGET_ARCH isn't exported
 861 # (breaks Makefiles using implicit rules, e.g. quilt, as GNU make has this
 862 # in them, undocumented)
 863 TARGET_ARCH[unexport] = "1"
 864
 865 # Make sure DISTRO isn't exported
 866 # (breaks sysvinit at least)
 867 DISTRO[unexport] = "1"
 868
 869 # Make sure that LIBC isn't exported
 870 # (breaks perl at least)
 871 LIBC[unexport] = "1"