classes/packaged-staging.bbclass

   1 #
   2 # Populate builds using prebuilt packages where possible to speed up builds
   3 # and allow staging to be reconstructed.
   4 #
   5 # To use it add that line to conf/local.conf:
   6 #
   7 # INHERIT += "packaged-staging"
   8 #
   9
  10
  11 #
  12 # bitbake.conf set PSTAGING_ACTIVE = "0", this class sets to "1" if we're active
  13 #
  14 PSTAGE_PKGVERSION = "${PV}-${PR}"
  15 PSTAGE_PKGARCH    = "${PACKAGE_ARCH}-${HOST_OS}"
  16 PSTAGE_EXTRAPATH  ?= "/${OELAYOUT_ABI}/${DISTRO_PR}/"
  17 PSTAGE_PKGPATH    = "${DISTRO}${PSTAGE_EXTRAPATH}"
  18 PSTAGE_PKGPN      = "${@bb.data.expand('staging-${PN}-${MULTIMACH_ARCH}${TARGET_VENDOR}-${TARGET_OS}', d).replace('_', '-')}"
  19 PSTAGE_PKGNAME    = "${PSTAGE_PKGPN}_${PSTAGE_PKGVERSION}_${PSTAGE_PKGARCH}.ipk"
  20 PSTAGE_PKG        = "${PSTAGE_DIR}/${PSTAGE_PKGPATH}/${PSTAGE_PKGNAME}"
  21 PSTAGE_WORKDIR   = "${TMPDIR}/pstage"
  22 PSTAGE_SCAN_CMD ?= "find ${PSTAGE_TMPDIR_STAGE} \( -name "*.la" -o -name "*-config" \) -type f"
  23
  24 PSTAGE_NATIVEDEPENDS = "\
  25     shasum-native \
  26     stagemanager-native \
  27     "
  28
  29 BB_STAMP_WHITELIST = "${PSTAGE_NATIVEDEPENDS}"
  30
  31 python __anonymous() {
  32     pstage_allowed = True
  33     pstage_host_mangle = False
  34     pstage_is_cross = False
  35
  36     # PSTAGE_NATIVEDEPENDS lists the packages we need before we can use
  37     # packaged staging. There will always be some packages we depend on.
  38     if bb.data.inherits_class('native', d):
  39         pn = bb.data.getVar('PN', d, True)
  40         nativedeps = bb.data.getVar('PSTAGE_NATIVEDEPENDS', d, True).split()
  41         if pn in nativedeps:
  42             pstage_allowed = False
  43
  44     # Images aren't of interest to us
  45     if bb.data.inherits_class('image', d):
  46         pstage_allowed = False
  47
  48     # We need OVERRIDES to be evaluated and applied.
  49     localdata = d.createCopy()
  50     bb.data.update_data(localdata)
  51     if localdata.getVar('PSTAGING_DISABLED', True) == "1":
  52         pstage_allowed = False
  53
  54     # libtool-cross does not inherit cross.
  55     if localdata.getVar('PN', True).startswith("libtool-cross"):
  56         pstage_host_mangle = True
  57         pstage_is_cross = True
  58
  59     # We need PSTAGE_PKGARCH to contain information about the target.
  60     if bb.data.inherits_class('cross', d):
  61         pstage_host_mangle = True
  62
  63     if pstage_host_mangle:
  64         bb.data.setVar('PSTAGE_PKGARCH', "${HOST_SYS}-${PACKAGE_ARCH}-${TARGET_OS}", d)
  65
  66     # These classes encode staging paths data files so we must mangle them
  67     # for reuse.
  68     if bb.data.inherits_class('native', d) or bb.data.inherits_class('nativesdk', d) or bb.data.inherits_class('cross', d) or bb.data.inherits_class('crosssdk', d) or bb.data.inherits_class('sdk', d):
  69         pstage_is_cross = True
  70
  71     if pstage_is_cross:
  72         scan_cmd = "grep -Irl ${TMPDIR} ${PSTAGE_TMPDIR_STAGE}"
  73         bb.data.setVar('PSTAGE_SCAN_CMD', scan_cmd, d)
  74
  75     # Add task dependencies if we're active, otherwise mark packaged staging
  76     # as inactive.
  77     if pstage_allowed:
  78         deps = bb.data.getVarFlag('do_setscene', 'depends', d) or ""
  79         deps += " stagemanager-native:do_populate_sysroot"
  80         bb.data.setVarFlag('do_setscene', 'depends', deps, d)
  81
  82         policy = bb.data.getVar("BB_STAMP_POLICY", d, True)
  83         if policy == "whitelist" or policy == "full":
  84            deps = bb.data.getVarFlag('do_setscene', 'recrdeptask', d) or ""
  85            deps += " do_setscene"
  86            bb.data.setVarFlag('do_setscene', 'recrdeptask', deps, d)
  87
  88         bb.data.setVar("PSTAGING_ACTIVE", "1", d)
  89     else:
  90         bb.data.setVar("PSTAGING_ACTIVE", "0", d)
  91 }
  92
  93 PSTAGE_MACHCONFIG   = "${PSTAGE_WORKDIR}/opkg.conf"
  94
  95 PSTAGE_PKGMANAGER = "stage-manager-ipkg"
  96
  97 PSTAGE_BUILD_CMD        = "stage-manager-ipkg-build -o 0 -g 0"
  98 PSTAGE_INSTALL_CMD      = "${PSTAGE_PKGMANAGER} -f ${PSTAGE_MACHCONFIG} -force-depends -o ${TMPDIR} install"
  99 PSTAGE_UPDATE_CMD       = "${PSTAGE_PKGMANAGER} -f ${PSTAGE_MACHCONFIG} -o ${TMPDIR} update"
 100 PSTAGE_REMOVE_CMD       = "${PSTAGE_PKGMANAGER} -f ${PSTAGE_MACHCONFIG} -force-depends -o ${TMPDIR} remove"
 101 PSTAGE_LIST_CMD         = "${PSTAGE_PKGMANAGER} -f ${PSTAGE_MACHCONFIG} -o ${TMPDIR} list_installed"
 102
 103 PSTAGE_TMPDIR_STAGE     = "${WORKDIR}/staging-pkg"
 104
 105 def pstage_manualclean(srcname, destvarname, d):
 106         src = os.path.join(bb.data.getVar('PSTAGE_TMPDIR_STAGE', d, True), srcname)
 107         dest = bb.data.getVar(destvarname, d, True)
 108
 109         for walkroot, dirs, files in os.walk(src):
 110                 bb.debug(2, "rm %s" % walkroot)
 111                 for file in files:
 112                         # Avoid breaking the held lock
 113                         if (file == "staging.lock"):
 114                                 continue
 115                         filepath = os.path.join(walkroot, file).replace(src, dest)
 116                         oe.path.remove(filepath)
 117
 118 def pstage_set_pkgmanager(d):
 119     path = bb.data.getVar("PATH", d, 1)
 120     pkgmanager = bb.which(path, 'opkg-cl')
 121     if pkgmanager == "":
 122         pkgmanager = bb.which(path, 'ipkg-cl')
 123     if pkgmanager != "":
 124         bb.data.setVar("PSTAGE_PKGMANAGER", pkgmanager, d)
 125
 126
 127 def pstage_cleanpackage(pkgname, d):
 128     pstage_set_pkgmanager(d)
 129     list_cmd = bb.data.getVar("PSTAGE_LIST_CMD", d, True)
 130
 131     bb.debug(2, "Checking if staging package installed")
 132     lf = bb.utils.lockfile(bb.data.expand("${SYSROOT_LOCK}", d))
 133     try:
 134         oe_run(d, "%s | grep %s" % (list_cmd, pkgname))
 135     except RuntimeError:
 136         bb.debug(1, "Manually removing any installed files from staging...")
 137         pstage_manualclean("sysroots", "STAGING_DIR", d)
 138         pstage_manualclean("deploy", "DEPLOY_DIR", d)
 139     else:
 140         bb.debug(1, "Uninstalling package from staging...")
 141         removecmd = bb.data.getVar("PSTAGE_REMOVE_CMD", d, 1)
 142         try:
 143             oe_run(d, "%s %s" % (removecmd, pkgname))
 144         except RuntimeError:
 145             bb.note("Failure removing staging package")
 146
 147     bb.utils.unlockfile(lf)
 148
 149 do_clean_prepend() {
 150         """
 151         Clear the build and temp directories
 152         """
 153
 154         removepkg = bb.data.expand("${PSTAGE_PKGPN}", d)
 155         pstage_cleanpackage(removepkg, d)
 156
 157         stagepkg = bb.data.expand("${PSTAGE_PKG}", d)
 158         if os.path.exists(stagepkg):
 159                 bb.note("Removing staging package %s" % base_path_out(stagepkg, d))
 160         oe.path.remove(stagepkg)
 161         oe.path.remove(stagepkg + ".md5")
 162 }
 163
 164 staging_helper () {
 165         # Assemble appropriate opkg.conf
 166         conffile=${PSTAGE_MACHCONFIG}
 167         mkdir -p ${PSTAGE_WORKDIR}/pstaging_lists
 168         arch="${PSTAGE_PKGARCH}"
 169         if [ ! -e $conffile ]; then
 170                 echo "arch $arch 1" > $conffile
 171                 echo "dest root /" >> $conffile
 172         elif [ `grep -c " $arch " $conffile` -eq 0 ]; then
 173                 priority=$(expr `grep -cE "^arch" $conffile` + 1)
 174                 sed -i -e "/dest/iarch $arch $priority" $conffile
 175         fi
 176         if [ ! -e ${TMPDIR}${libdir_native}/opkg/info/ ]; then
 177                 mkdir -p ${TMPDIR}${libdir_native}/opkg/info/
 178         fi
 179         if [ ! -e ${TMPDIR}${libdir_native}/ipkg/ ]; then
 180                 ln -sf opkg/ ${TMPDIR}${libdir_native}/ipkg || true
 181         fi
 182 }
 183
 184 def staging_fetch(stagepkg, d):
 185     import bb.fetch
 186
 187     # only try and fetch if the user has configured a mirror
 188     if bb.data.getVar('PSTAGE_MIRROR', d) != "":
 189         # Copy the data object and override DL_DIR and SRC_URI
 190         pd = d.createCopy()
 191         dldir = bb.data.expand("${PSTAGE_DIR}/${PSTAGE_PKGPATH}", pd)
 192         mirror = bb.data.expand("${PSTAGE_MIRROR}/${PSTAGE_PKGPATH}/", pd)
 193         srcuri = mirror + os.path.basename(stagepkg)
 194         bb.data.setVar('DL_DIR', dldir, pd)
 195         bb.data.setVar('SRC_URI', srcuri, pd)
 196
 197         # Try a fetch from the pstage mirror, if it fails just return and
 198         # we will build the package
 199         try:
 200             bb.fetch.init([srcuri], pd)
 201             bb.fetch.go(pd, [srcuri])
 202         except:
 203             return
 204
 205 PSTAGE_TASKS_COVERED = "fetch unpack munge patch configure qa_configure rig_locales compile sizecheck install deploy package populate_sysroot package_write_deb package_write_ipk package_write package_stage qa_staging"
 206
 207 SCENEFUNCS += "packagestage_scenefunc"
 208
 209 python packagestage_scenefunc () {
 210     import glob
 211     if bb.data.getVar("PSTAGING_ACTIVE", d, 1) == "0":
 212         return
 213
 214     bb.build.exec_func("staging_helper", d)
 215
 216     removepkg = bb.data.expand("${PSTAGE_PKGPN}", d)
 217
 218     pstage_cleanpackage(removepkg, d)
 219
 220     stagepkg = bb.data.expand("${PSTAGE_PKG}", d)
 221     if not os.path.exists(stagepkg):
 222         staging_fetch(stagepkg, d)
 223
 224     if os.path.exists(stagepkg):
 225         pstage_set_pkgmanager(d)
 226         file = bb.data.getVar("FILE", d, True)
 227         bb.debug(2, "Packaged staging active for %s\n" % file)
 228
 229         #
 230         # Install the staging package somewhere temporarily so we can extract the stamp files
 231         #
 232         bb.mkdirhier(bb.data.expand("${WORKDIR}/tstage/${libdir_native}/opkg/info/ ", d))
 233         cmd = bb.data.expand("${PSTAGE_PKGMANAGER} -f ${PSTAGE_MACHCONFIG} -force-depends -o ${WORKDIR}/tstage install", d)
 234         try:
 235             oe_run(d, "%s %s" % (cmd, stagepkg))
 236         except RuntimeError:
 237             bb.fatal("Couldn't install the staging package to a temp directory")
 238
 239         #
 240         # Grab the staging lock now so that we don't have other threads try and
 241         # validate or install based on these stamps being valid.  This is a
 242         # potential issue for certain BB_STAMP_POLICY values and enough
 243         # concurrent threads.
 244         #
 245         lf = bb.utils.lockfile(bb.data.expand("${SYSROOT_LOCK}", d))
 246
 247         #
 248         # Copy the stamp files into the main stamps directoy
 249         #
 250         cmd = bb.data.expand("cp -PpR ${WORKDIR}/tstage/stamps/* ${TMPDIR}/stamps/", d)
 251         try:
 252             ret = oe_run(d, cmd)
 253         except RuntimeError:
 254             bb.utils.unlockfile(lf)
 255             bb.fatal("Couldn't copy the staging package stamp files")
 256
 257         #
 258         # Iterate over the stamps seeing if they're valid. If we find any that
 259         # are invalid or the task wasn't in the taskgraph, assume caution and
 260         # do a rebuild.
 261         #
 262         # FIXME - some tasks are safe to ignore in the task graph. e.g. package_write_*
 263         stageok = True
 264         taskscovered = bb.data.getVar("PSTAGE_TASKS_COVERED", d, True).split()
 265         stamp = bb.data.getVar("STAMP", d, True)
 266         for task in taskscovered:
 267             task = 'do_' + task
 268             stampfn = "%s.%s" % (stamp, task)
 269             bb.debug(1, "Checking %s" % (stampfn))
 270             if os.path.exists(stampfn):
 271                 stageok = bb.runqueue.check_stamp_fn(file, task, d)
 272                 bb.debug(1, "Result %s" % (stageok))
 273                 if not stageok:
 274                     bb.utils.unlockfile(lf)
 275                     break
 276
 277         # Remove the stamps and files we added above
 278         # FIXME - we should really only remove the stamps we added
 279         for fname in glob.glob(stamp + '.*'):
 280             oe.path.remove(fname)
 281
 282         oe.path.remove(bb.data.expand("${WORKDIR}/tstage", d))
 283         if stageok:
 284             bb.note("Staging package found, using it for %s." % file)
 285             installcmd = bb.data.getVar("PSTAGE_INSTALL_CMD", d, 1)
 286             try:
 287                 ret = oe_run(d, "%s %s" % (installcmd, stagepkg))
 288             except RuntimeError:
 289                 bb.note("Failure installing prestage package")
 290             finally:
 291                 bb.utils.unlockfile(lf)
 292
 293             bb.build.exec_func("staging_package_libtoolhack", d)
 294
 295             bb.build.make_stamp("do_stage_package_populated", d)
 296         else:
 297             bb.note("Staging package found but invalid for %s" % file)
 298
 299 }
 300 packagestage_scenefunc[cleandirs] = "${PSTAGE_TMPDIR_STAGE}"
 301 packagestage_scenefunc[dirs] = "${STAGING_DIR}"
 302
 303 addhandler packagedstage_stampfixing_eventhandler
 304 python packagedstage_stampfixing_eventhandler() {
 305     if bb.event.getName(e) == "StampUpdate":
 306         taskscovered = bb.data.getVar("PSTAGE_TASKS_COVERED", e.data, 1).split()
 307         for (fn, task) in e.targets:
 308             # strip off 'do_'
 309             task = task[3:]
 310             if task in taskscovered:
 311                 stamp = "%s.do_stage_package_populated" % e.stampPrefix[fn]
 312                 if os.path.exists(stamp):
 313                     # We're targetting a task which was skipped with packaged staging
 314                     # so we need to remove the autogenerated stamps.
 315                     for task in taskscovered:
 316                         covered = "%s.do_%s" % (e.stampPrefix[fn], task)
 317                         oe.path.remove(covered)
 318                     oe.path.remove(stamp)
 319 }
 320
 321 populate_sysroot_preamble () {
 322         if [ "$PSTAGING_ACTIVE" = "1" ]; then
 323                 stage-manager -p ${STAGING_DIR} -c ${PSTAGE_WORKDIR}/stamp-cache-staging -u || true
 324         fi
 325 }
 326
 327 populate_sysroot_postamble () {
 328         if [ "$PSTAGING_ACTIVE" = "1" ]; then
 329                 # list the packages currently installed in staging
 330                 # ${PSTAGE_LIST_CMD} | awk '{print $1}' > ${PSTAGE_WORKDIR}/installed-list
 331
 332                 # exitcode == 5 is ok, it means the files change
 333                 set +e
 334                 stage-manager -p ${STAGING_DIR} -c ${PSTAGE_WORKDIR}/stamp-cache-staging -u -d ${PSTAGE_TMPDIR_STAGE}/sysroots
 335                 exitcode=$?
 336                 if [ "$exitcode" != "5" -a "$exitcode" != "0" ]; then
 337                         exit $exitcode
 338                 fi
 339                 set -e
 340         fi
 341 }
 342
 343 packagedstaging_fastpath () {
 344         mkdir -p ${PSTAGE_TMPDIR_STAGE}/sysroots/
 345         cp -fpPR ${SYSROOT_DESTDIR}/${STAGING_DIR}/* ${PSTAGE_TMPDIR_STAGE}/sysroots/ || /bin/true
 346 }
 347
 348 do_populate_sysroot[dirs] =+ "${PSTAGE_DIR}"
 349 python populate_sysroot_prehook() {
 350     bb.build.exec_func("populate_sysroot_preamble", d)
 351 }
 352
 353 python populate_sysroot_posthook() {
 354     bb.build.exec_func("populate_sysroot_postamble", d)
 355 }
 356
 357
 358 staging_packager () {
 359
 360         mkdir -p ${PSTAGE_TMPDIR_STAGE}/CONTROL
 361         mkdir -p ${PSTAGE_DIR}/${PSTAGE_PKGPATH}
 362
 363         echo "Package: ${PSTAGE_PKGPN}"         >  ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
 364         echo "Version: ${PSTAGE_PKGVERSION}"    >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
 365         echo "Description: ${DESCRIPTION}"      >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
 366         echo "Section: ${SECTION}"              >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
 367         echo "Priority: Optional"               >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
 368         echo "Maintainer: ${MAINTAINER}"        >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
 369         echo "Architecture: ${PSTAGE_PKGARCH}"  >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
 370
 371         # Protect against empty SRC_URI
 372         srcuri="${SRC_URI}"
 373         if [ "$srcuri" = "" ]; then
 374                 srcuri="OpenEmbedded"
 375         fi
 376         echo "Source: $srcuri"               >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
 377
 378         # Deal with libtool not supporting sysroots
 379         # Need to remove hardcoded paths and fix these when we install the
 380         # staging packages.
 381         # Could someone please add sysroot support to libtool!
 382         for i in `${PSTAGE_SCAN_CMD}` ; do \
 383                 sed -i -e s:${STAGING_DIR}:FIXMESTAGINGDIR:g $i
 384                 echo $i | sed -e 's:${PSTAGE_TMPDIR_STAGE}/::' >> ${PSTAGE_TMPDIR_STAGE}/sysroots/fixmepath
 385         done
 386
 387         ${PSTAGE_BUILD_CMD} ${PSTAGE_TMPDIR_STAGE} ${PSTAGE_DIR}/${PSTAGE_PKGPATH}
 388 }
 389
 390 staging_package_installer () {
 391         #${PSTAGE_INSTALL_CMD} ${PSTAGE_PKG}
 392
 393         STATUSFILE=${TMPDIR}${libdir_native}/opkg/status
 394         echo "Package: ${PSTAGE_PKGPN}"        >> $STATUSFILE
 395         echo "Version: ${PSTAGE_PKGVERSION}"   >> $STATUSFILE
 396         echo "Status: install user installed"  >> $STATUSFILE
 397         echo "Architecture: ${PSTAGE_PKGARCH}" >> $STATUSFILE
 398         echo "" >> $STATUSFILE
 399
 400         CTRLFILE=${TMPDIR}${libdir_native}/opkg/info/${PSTAGE_PKGPN}.control
 401         echo "Package: ${PSTAGE_PKGPN}"        > $CTRLFILE
 402         echo "Version: ${PSTAGE_PKGVERSION}"   >> $CTRLFILE
 403         echo "Architecture: ${PSTAGE_PKGARCH}" >> $CTRLFILE
 404
 405         cd ${PSTAGE_TMPDIR_STAGE}
 406         find -type f | grep -v ./CONTROL | sed -e 's/^\.//' > ${TMPDIR}${libdir_native}/opkg/info/${PSTAGE_PKGPN}.list
 407 }
 408
 409 python staging_package_libtoolhack () {
 410         # Deal with libtool not supporting sysroots and add our new
 411         # staging location
 412         tmpdir = bb.data.getVar('TMPDIR', d, True)
 413         staging = bb.data.getVar('STAGING_DIR', d, True)
 414         fixmefn =  staging + "/fixmepath"
 415         try:
 416             fixmefd = open(fixmefn,"r")
 417             fixmefiles = fixmefd.readlines()
 418             fixmefd.close()
 419             oe.path.remove(fixmefn)
 420             for file in fixmefiles:
 421                 oe_run(d, "sed -i -e s:FIXMESTAGINGDIR:%s:g %s" % (staging, tmpdir + '/' + file))
 422         except IOError:
 423             pass
 424 }
 425
 426 python do_package_stage () {
 427     import oe.packagedata
 428
 429     if bb.data.getVar("PSTAGING_ACTIVE", d, 1) != "1":
 430         return
 431
 432     #
 433     # Handle deploy/ packages
 434     #
 435     bb.build.exec_func("read_subpackage_metadata", d)
 436     stagepath = bb.data.getVar("PSTAGE_TMPDIR_STAGE", d, 1)
 437     tmpdir = bb.data.getVar("TMPDIR", d, True)
 438     packages = (bb.data.getVar('PACKAGES', d, 1) or "").split()
 439     if len(packages) > 0:
 440         if bb.data.inherits_class('package_ipk', d):
 441             ipkpath = bb.data.getVar('DEPLOY_DIR_IPK', d, True).replace(tmpdir, stagepath)
 442         if bb.data.inherits_class('package_deb', d):
 443             debpath = bb.data.getVar('DEPLOY_DIR_DEB', d, True).replace(tmpdir, stagepath)
 444         if bb.data.inherits_class('package_rpm', d):
 445             rpmpath = bb.data.getVar('DEPLOY_DIR_RPM', d, True).replace(tmpdir, stagepath)
 446
 447         for pkg in packages:
 448             pkgname = bb.data.getVar('PKG_%s' % pkg, d, 1)
 449             if not pkgname:
 450                 pkgname = pkg
 451             arch = bb.data.getVar('PACKAGE_ARCH_%s' % pkg, d, 1)
 452             if not arch:
 453                 arch = bb.data.getVar('PACKAGE_ARCH', d, 1)
 454             pr = bb.data.getVar('PR_%s' % pkg, d, 1)
 455             if not pr:
 456                 pr = bb.data.getVar('PR', d, 1)
 457             if not oe.packagedata.packaged(pkg, d):
 458                 continue
 459             if bb.data.inherits_class('package_ipk', d):
 460                 srcname = bb.data.expand(pkgname + "_${PKGV}-" + pr + "${DISTRO_PR}" + "_" + arch + ".ipk", d)
 461                 srcfile = bb.data.expand("${DEPLOY_DIR_IPK}/" + arch + "/" + srcname, d)
 462                 if os.path.exists(srcfile):
 463                     destpath = ipkpath + "/" + arch + "/"
 464                     bb.mkdirhier(destpath)
 465                     bb.copyfile(srcfile, destpath + srcname)
 466
 467             if bb.data.inherits_class('package_deb', d):
 468                 if arch == 'all':
 469                     srcname = bb.data.expand(pkgname + "_${PV}-" + pr + "${DISTRO_PR}" + "_all.deb", d)
 470                 else:
 471                     srcname = bb.data.expand(pkgname + "_${PV}-" + pr + "${DISTRO_PR}" + "_${DPKG_ARCH}.deb", d)
 472                 srcfile = bb.data.expand("${DEPLOY_DIR_DEB}/" + arch + "/" + srcname, d)
 473                 if os.path.exists(srcfile):
 474                     destpath = debpath + "/" + arch + "/"
 475                     bb.mkdirhier(destpath)
 476                     bb.copyfile(srcfile, destpath + srcname)
 477
 478             if bb.data.inherits_class('package_rpm', d):
 479                 version = bb.data.getVar('PV', d, 1)
 480                 version = version.replace('-', '+')
 481                 bb.data.setVar('RPMPV', version, d)
 482                 srcname = bb.data.expand(pkgname + "-${RPMPV}-" + pr + "${DISTRO_PR}" + ".${TARGET_ARCH}.rpm", d)
 483                 srcfile = bb.data.expand("${DEPLOY_DIR_RPM}/" + arch + "/" + srcname, d)
 484                 if os.path.exists(srcfile):
 485                     destpath = rpmpath + "/" + arch + "/"
 486                     bb.mkdirhier(destpath)
 487                     bb.copyfile(srcfile, destpath + srcname)
 488
 489
 490     #
 491     # Handle stamps/ files
 492     #
 493     stampfn = bb.data.getVar("STAMP", d, True)
 494     destdir = os.path.dirname(stampfn.replace(tmpdir, stagepath))
 495     bb.mkdirhier(destdir)
 496     # We need to include the package_stage stamp in the staging package so create one
 497     bb.build.make_stamp("do_package_stage", d)
 498     oe_run(d, "cp -PpR %s.do_* %s/" % (stampfn, destdir))
 499
 500     pstage_set_pkgmanager(d)
 501     bb.build.exec_func("staging_helper", d)
 502     bb.build.exec_func("staging_packager", d)
 503     lf = bb.utils.lockfile(bb.data.expand("${SYSROOT_LOCK}", d))
 504     bb.build.exec_func("staging_package_installer", d)
 505     bb.utils.unlockfile(lf)
 506 }
 507
 508 #
 509 # Note an assumption here is that do_deploy runs before do_package_write/do_populate_sysroot
 510 #
 511 addtask package_stage after do_package_write do_populate_sysroot before do_build
 512
 513 do_package_stage_all () {
 514         :
 515 }
 516 do_package_stage_all[recrdeptask] = "do_package_stage"
 517 addtask package_stage_all after do_package_stage before do_build