scripts/create.sh

   1 #!/usr/bin/env bash
   2 #-
   3 # Copyright © 2010, 2011, 2012
   4 #       Thorsten Glaser <tg@mirbsd.org>
   5 # Copyright © 2010-2014
   6 #       Waldemar Brodkorb <wbx@openadk.org>
   7 #
   8 # Provided that these terms and disclaimer and all copyright notices
   9 # are retained or reproduced in an accompanying document, permission
  10 # is granted to deal in this work without restriction, including un‐
  11 # limited rights to use, publicly perform, distribute, sell, modify,
  12 # merge, give away, or sublicence.
  13 #
  14 # This work is provided “AS IS” and WITHOUT WARRANTY of any kind, to
  15 # the utmost extent permitted by applicable law, neither express nor
  16 # implied; without malicious intent or gross negligence. In no event
  17 # may a licensor, author or contributor be held liable for indirect,
  18 # direct, other damage, loss, or other issues arising in any way out
  19 # of dealing in the work, even if advised of the possibility of such
  20 # damage or existence of a defect, except proven that it results out
  21 # of said person’s immediate fault when using the work as intended.
  22 #
  23 # Alternatively, this work may be distributed under the Terms of the
  24 # General Public License, any version as published by the Free Soft‐
  25 # ware Foundation.
  26 #-
  27 # Create a hard disc image, bootable using GNU GRUB2, with an ext2fs
  28 # root partition and an OpenADK cfgfs partition.
  29
  30 ADK_TOPDIR=$(pwd)
  31 HOST=$(gcc -dumpmachine)
  32 me=$0
  33
  34 case :$PATH: in
  35 (*:$ADK_TOPDIR/host_$HOST/usr/bin:*) ;;
  36 (*) export PATH=$PATH:$ADK_TOPDIR/host_$HOST/usr/bin ;;
  37 esac
  38
  39 test -n "$KSH_VERSION" || exec mksh "$me" "$@"
  40 if test -z "$KSH_VERSION"; then
  41         echo >&2 Fatal error: could not run myself with mksh!
  42         exit 255
  43 fi
  44
  45 ### run with mksh from here onwards ###
  46
  47 me=${me##*/}
  48
  49 ADK_TOPDIR=$(realpath .)
  50 ostype=$(uname -s)
  51
  52 function usage {
  53         cat >&2 <<EOF
  54 Syntax: $me [-c cfgfssize] [+g] [-i imagesize] [-p panictime]
  55     [-s serialspeed] [-t] [-T imagetype] [+U] target.ima source.tgz
  56 Explanation/Defaults:
  57         -c: minimum 0, maximum 5, default 1 (MiB)
  58         -g: enable installing GNU GRUB 2
  59         -i: total image, default 512 (MiB; max. approx. 2 TiB)
  60         -p: default 10 (seconds; 0 disables; max. 300)
  61         -s: default 115200 (bps, others: 9600 19200 38400 57600)
  62         -t: enable serial console (+t disables it, default)
  63         -T: image type (default raw, others: vdi)
  64 EOF
  65         exit ${1:-1}
  66 }
  67
  68 cfgfs=1
  69 usegrub=0
  70 tgtmib=512
  71 panicreboot=10
  72 speed=115200
  73 serial=0
  74 tgttype=raw
  75
  76 while getopts "c:ghi:p:s:tT:" ch; do
  77         case $ch {
  78         (c)     if (( (cfgfs = OPTARG) < 0 || cfgfs > 5 )); then
  79                         print -u2 "$me: -c $OPTARG out of bounds"
  80                         usage
  81                 fi ;;
  82         (g)     usegrub=1 ;;
  83         (h)     usage 0 ;;
  84         (i)     if (( (tgtmib = OPTARG) < 7 || tgtmib > 2097150 )); then
  85                         print -u2 "$me: -i $OPTARG out of bounds"
  86                         usage
  87                 fi ;;
  88         (p)     if (( (panicreboot = OPTARG) < 0 || panicreboot > 300 )); then
  89                         print -u2 "$me: -p $OPTARG out of bounds"
  90                         usage
  91                 fi ;;
  92         (s)     if [[ $OPTARG != @(96|192|384|576|1152)00 ]]; then
  93                         print -u2 "$me: serial speed $OPTARG invalid"
  94                         usage
  95                 fi
  96                 speed=$OPTARG ;;
  97         (t)     serial=1 ;;
  98         (+t)    serial=0 ;;
  99         (T)     if [[ $OPTARG != @(raw|vdi) ]]; then
 100                         print -u2 "$me: image type $OPTARG invalid"
 101                         usage
 102                 fi
 103                 tgttype=$OPTARG ;;
 104         (*)     usage 1 ;;
 105         }
 106 done
 107 shift $((OPTIND - 1))
 108
 109 (( $# == 2 )) || usage 1
 110
 111 f=0
 112 tools='bc genext2fs'
 113 [[ $tgttype = vdi ]] && tools="$tools VBoxManage"
 114 for tool in $tools; do
 115         print -n Checking if $tool is installed...
 116         if whence -p $tool >/dev/null; then
 117                 print " okay"
 118         else
 119                 print " failed"
 120                 f=1
 121         fi
 122 done
 123 (( f )) && exit 1
 124 if bc --help >/dev/null 2>&1; then
 125         # GNU bc shows a “welcome message” which irritates scripts
 126         bc='bc -q'
 127 else
 128         bc=bc
 129 fi
 130
 131 tgt=$1
 132 [[ $tgt = /* ]] || tgt=$PWD/$tgt
 133 src=$2
 134
 135 if [[ ! -f $src ]]; then
 136         print -u2 "'$src' is not a file, exiting"
 137         exit 1
 138 fi
 139 if ! T=$(mktemp -d /tmp/openadk.XXXXXXXXXX); then
 140         print -u2 Error creating temporary directory.
 141         exit 1
 142 fi
 143 print "Installing $src on $tgt."
 144
 145 cyls=$tgtmib
 146 heads=64
 147 secs=32
 148 if stat -qs .>/dev/null 2>&1; then
 149         statcmd='stat -f %z'    # BSD stat (or so we assume)
 150 else
 151         statcmd='stat -c %s'    # GNU stat
 152 fi
 153
 154 if (( usegrub )); then
 155         tar -xOzf "$src" boot/grub/core.img >"$T/core.img"
 156         integer coreimgsz=$($statcmd "$T/core.img")
 157         if (( coreimgsz < 1024 )); then
 158                 print -u2 core.img is probably too small: $coreimgsz
 159                 rm -rf "$T"
 160                 exit 1
 161         fi
 162         if (( coreimgsz > 65024 )); then
 163                 print -u2 core.img is larger than 64K-512: $coreimgsz
 164                 rm -rf "$T"
 165                 exit 1
 166         fi
 167 else
 168         # fake it
 169         integer coreimgsz=1
 170 fi
 171 (( coreendsec = (coreimgsz + 511) / 512 ))
 172 corestartsec=1
 173 corepatchofs=$((0x414))
 174 # partition offset: at least coreendsec+1 but aligned on a multiple of secs
 175 (( partofs = ((coreendsec / secs) + 1) * secs ))
 176 # calculate size of ext2fs in KiB as image size minus cfgfs minus firsttrack
 177 ((# partfssz = ((cyls - cfgfs) * 64 * 32 - partofs) / 2 ))
 178
 179 if (( usegrub )); then
 180         print Preparing MBR and GRUB2...
 181 else
 182         print Preparing partition table...
 183 fi
 184 dd if=/dev/zero of="$T/firsttrack" count=$partofs 2>/dev/null
 185 echo $corestartsec $coreendsec | mksh "$ADK_TOPDIR/scripts/bootgrub.mksh" \
 186     -A -g $((cyls - cfgfs)):$heads:$secs -M 1:0x83 -O $partofs | \
 187     dd of="$T/firsttrack" conv=notrunc 2>/dev/null
 188 if (( usegrub )); then
 189         dd if="$T/core.img" of="$T/firsttrack" conv=notrunc \
 190             seek=$corestartsec 2>/dev/null
 191         # set partition where it can find /boot/grub
 192         print -n '\0\0\0\0' | \
 193             dd of="$T/firsttrack" conv=notrunc bs=1 seek=$corepatchofs \
 194             2>/dev/null
 195 fi
 196
 197 # create cfgfs partition (mostly taken from bootgrub.mksh)
 198 set -A thecode
 199 typeset -Uui8 thecode
 200 mbrpno=0
 201 set -A g_code $cyls $heads $secs
 202 (( pssz = cfgfs * g_code[1] * g_code[2] ))
 203 (( pofs = (cyls - cfgfs) * g_code[1] * g_code[2] ))
 204 set -A o_code   # g_code equivalent for partition offset
 205 (( o_code[2] = pofs % g_code[2] + 1 ))
 206 (( o_code[1] = pofs / g_code[2] ))
 207 (( o_code[0] = o_code[1] / g_code[1] + 1 ))
 208 (( o_code[1] = o_code[1] % g_code[1] + 1 ))
 209 # boot flag; C/H/S offset
 210 thecode[mbrpno++]=0x00
 211 (( thecode[mbrpno++] = o_code[1] - 1 ))
 212 (( cylno = o_code[0] > 1024 ? 1023 : o_code[0] - 1 ))
 213 (( thecode[mbrpno++] = o_code[2] | ((cylno & 0x0300) >> 2) ))
 214 (( thecode[mbrpno++] = cylno & 0x00FF ))
 215 # partition type; C/H/S end
 216 (( thecode[mbrpno++] = 0x88 ))
 217 (( thecode[mbrpno++] = g_code[1] - 1 ))
 218 (( cylno = g_code[0] > 1024 ? 1023 : g_code[0] - 1 ))
 219 (( thecode[mbrpno++] = g_code[2] | ((cylno & 0x0300) >> 2) ))
 220 (( thecode[mbrpno++] = cylno & 0x00FF ))
 221 # partition offset, size (LBA)
 222 (( thecode[mbrpno++] = pofs & 0xFF ))
 223 (( thecode[mbrpno++] = (pofs >> 8) & 0xFF ))
 224 (( thecode[mbrpno++] = (pofs >> 16) & 0xFF ))
 225 (( thecode[mbrpno++] = (pofs >> 24) & 0xFF ))
 226 (( thecode[mbrpno++] = pssz & 0xFF ))
 227 (( thecode[mbrpno++] = (pssz >> 8) & 0xFF ))
 228 (( thecode[mbrpno++] = (pssz >> 16) & 0xFF ))
 229 (( thecode[mbrpno++] = (pssz >> 24) & 0xFF ))
 230 # write partition table entry
 231 ostr=
 232 curptr=0
 233 while (( curptr < 16 )); do
 234         ostr=$ostr\\0${thecode[curptr++]#8#}
 235 done
 236 print -n "$ostr" | \
 237     dd of="$T/firsttrack" conv=notrunc bs=1 seek=$((0x1CE)) 2>/dev/null
 238
 239 print Extracting installation archive...
 240 mkdir "$T/src"
 241 xz -dc "$src" | (cd "$T/src"; tar -xpf -)
 242 cd "$T/src"
 243 rnddev=/dev/urandom
 244 [[ -c /dev/arandom ]] && rnddev=/dev/arandom
 245 dd if=$rnddev bs=16 count=1 >>etc/.rnd 2>/dev/null
 246 print Fixing up permissions...
 247 chmod 1777 tmp
 248 [[ -f usr/bin/sudo ]] && chmod 4755 usr/bin/sudo
 249
 250 if (( usegrub )); then
 251         print Configuring GRUB2 bootloader...
 252         mkdir -p boot/grub
 253         (
 254                 print set default=0
 255                 print set timeout=1
 256                 if (( serial )); then
 257                         print serial --unit=0 --speed=$speed
 258                         print terminal_output serial
 259                         print terminal_input serial
 260                         consargs="console=ttyS0,$speed console=tty0"
 261                 else
 262                         print terminal_output console
 263                         print terminal_input console
 264                         consargs="console=tty0"
 265                 fi
 266                 print
 267                 print 'menuentry "GNU/Linux (OpenADK)" {'
 268                 linuxargs="root=/dev/sda1 $consargs"
 269                 (( panicreboot )) && linuxargs="$linuxargs panic=$panicreboot"
 270                 print "\tlinux /boot/kernel $linuxargs"
 271                 print '}'
 272         ) >boot/grub/grub.cfg
 273 fi
 274
 275 print "Creating ext2fs filesystem image..."
 276 cd "$T"
 277 f=0
 278 genext2fs -U -N 32768 -b $((partfssz)) -d src fsimg || f=1
 279 if (( !f )); then
 280         # use bc(1): this may be over the shell’s 32-bit arithmetics
 281         wantsz=$($bc <<<"$((partfssz))*1024")
 282         gotsz=$($statcmd fsimg)
 283         if [[ $wantsz != "$gotsz" ]]; then
 284                 print -u2 "Error: want $wantsz bytes, got $gotsz bytes!"
 285                 f=1
 286         fi
 287 fi
 288 if (( f )); then
 289         print -u2 "Error creating ext2fs filesystem image"
 290         cd /
 291         rm -rf "$T"
 292         exit 1
 293 fi
 294 # delete source tree, to save disc space
 295 rm -rf src
 296
 297 if [[ $tgttype = raw ]]; then
 298         tgttmp=$tgt
 299 else
 300         tgttmp=$T/dst.ima
 301 fi
 302 print "Putting together raw output image $tgttmp..."
 303 dd if=/dev/zero bs=1048576 count=$cfgfs 2>/dev/null | \
 304     cat firsttrack fsimg - >"$tgttmp"
 305 # use bc(1): this may be over the shell’s 32-bit arithmetics
 306 wantsz=$($bc <<<"$tgtmib*1048576")
 307 gotsz=$($statcmd "$tgttmp")
 308 if [[ $wantsz != "$gotsz" ]]; then
 309         print -u2 "Error: want $wantsz bytes, got $gotsz bytes!"
 310         cd /
 311         rm -rf "$T"
 312         exit 1
 313 fi
 314
 315 case $tgttype {
 316 (raw)
 317         ;;
 318 (vdi)
 319         print "Converting raw image to VDI..."
 320         VBoxManage convertdd dst.ima dst.vdi
 321         rm dst.ima
 322         print "Moving VDI image to $tgt.vdi..."
 323         mv -f dst.vdi "$tgt".vdi
 324         ;;
 325 }
 326
 327 print Finishing up...
 328 cd "$ADK_TOPDIR"
 329 rm -rf "$T"
 330 exit 0