Merge from mainline (167278:168000).
[official-gcc/graphite-test-results.git] / gcc / ada / s-taskin.ads
blob4841d0b8b1dd3f122b6037819096a15f81ca7218
1 ------------------------------------------------------------------------------
2 -- --
3 -- GNAT RUN-TIME LIBRARY (GNARL) COMPONENTS --
4 -- --
5 -- S Y S T E M . T A S K I N G --
6 -- --
7 -- S p e c --
8 -- --
9 -- Copyright (C) 1992-2010, Free Software Foundation, Inc. --
10 -- --
11 -- GNARL is free software; you can redistribute it and/or modify it under --
12 -- terms of the GNU General Public License as published by the Free Soft- --
13 -- ware Foundation; either version 3, or (at your option) any later ver- --
14 -- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
15 -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
16 -- or FITNESS FOR A PARTICULAR PURPOSE. --
17 -- --
18 -- As a special exception under Section 7 of GPL version 3, you are granted --
19 -- additional permissions described in the GCC Runtime Library Exception, --
20 -- version 3.1, as published by the Free Software Foundation. --
21 -- --
22 -- You should have received a copy of the GNU General Public License and --
23 -- a copy of the GCC Runtime Library Exception along with this program; --
24 -- see the files COPYING3 and COPYING.RUNTIME respectively. If not, see --
25 -- <http://www.gnu.org/licenses/>. --
26 -- --
27 -- GNARL was developed by the GNARL team at Florida State University. --
28 -- Extensive contributions were provided by Ada Core Technologies, Inc. --
29 -- --
30 ------------------------------------------------------------------------------
32 -- This package provides necessary type definitions for compiler interface
34 -- Note: the compiler generates direct calls to this interface, via Rtsfind.
35 -- Any changes to this interface may require corresponding compiler changes.
37 with Ada.Exceptions;
38 with Ada.Unchecked_Conversion;
40 with System.Parameters;
41 with System.Task_Info;
42 with System.Soft_Links;
43 with System.Task_Primitives;
44 with System.Stack_Usage;
45 with System.Multiprocessors;
47 package System.Tasking is
48 pragma Preelaborate;
50 -------------------
51 -- Locking Rules --
52 -------------------
54 -- The following rules must be followed at all times, to prevent
55 -- deadlock and generally ensure correct operation of locking.
57 -- Never lock a lock unless abort is deferred
59 -- Never undefer abort while holding a lock
61 -- Overlapping critical sections must be properly nested, and locks must
62 -- be released in LIFO order. E.g., the following is not allowed:
64 -- Lock (X);
65 -- ...
66 -- Lock (Y);
67 -- ...
68 -- Unlock (X);
69 -- ...
70 -- Unlock (Y);
72 -- Locks with lower (smaller) level number cannot be locked
73 -- while holding a lock with a higher level number. (The level
75 -- 1. System.Tasking.PO_Simple.Protection.L (any PO lock)
76 -- 2. System.Tasking.Initialization.Global_Task_Lock (in body)
77 -- 3. System.Task_Primitives.Operations.Single_RTS_Lock
78 -- 4. System.Tasking.Ada_Task_Control_Block.LL.L (any TCB lock)
80 -- Clearly, there can be no circular chain of hold-and-wait
81 -- relationships involving locks in different ordering levels.
83 -- We used to have Global_Task_Lock before Protection.L but this was
84 -- clearly wrong since there can be calls to "new" inside protected
85 -- operations. The new ordering prevents these failures.
87 -- Sometimes we need to hold two ATCB locks at the same time. To allow us
88 -- to order the locking, each ATCB is given a unique serial number. If one
89 -- needs to hold locks on several ATCBs at once, the locks with lower
90 -- serial numbers must be locked first.
92 -- We don't always need to check the serial numbers, since the serial
93 -- numbers are assigned sequentially, and so:
95 -- . The parent of a task always has a lower serial number.
96 -- . The activator of a task always has a lower serial number.
97 -- . The environment task has a lower serial number than any other task.
98 -- . If the activator of a task is different from the task's parent,
99 -- the parent always has a lower serial number than the activator.
101 ---------------------------------
102 -- Task_Id related definitions --
103 ---------------------------------
105 type Ada_Task_Control_Block;
107 type Task_Id is access all Ada_Task_Control_Block;
108 for Task_Id'Size use System.Task_Primitives.Task_Address_Size;
110 Null_Task : constant Task_Id;
112 type Task_List is array (Positive range <>) of Task_Id;
114 function Self return Task_Id;
115 pragma Inline (Self);
116 -- This is the compiler interface version of this function. Do not call
117 -- from the run-time system.
119 function To_Task_Id is
120 new Ada.Unchecked_Conversion
121 (System.Task_Primitives.Task_Address, Task_Id);
122 function To_Address is
123 new Ada.Unchecked_Conversion
124 (Task_Id, System.Task_Primitives.Task_Address);
126 -----------------------
127 -- Enumeration types --
128 -----------------------
130 type Task_States is
131 (Unactivated,
132 -- TCB initialized but not task has not been created.
133 -- It cannot be executing.
135 -- Activating,
136 -- -- ??? Temporarily at end of list for GDB compatibility
137 -- -- Task has been created and is being made Runnable.
139 -- Active states
140 -- For all states from here down, the task has been activated.
141 -- For all states from here down, except for Terminated, the task
142 -- may be executing.
143 -- Activator = null iff it has not yet completed activating.
145 Runnable,
146 -- Task is not blocked for any reason known to Ada.
147 -- (It may be waiting for a mutex, though.)
148 -- It is conceptually "executing" in normal mode.
150 Terminated,
151 -- The task is terminated, in the sense of ARM 9.3 (5).
152 -- Any dependents that were waiting on terminate
153 -- alternatives have been awakened and have terminated themselves.
155 Activator_Sleep,
156 -- Task is waiting for created tasks to complete activation
158 Acceptor_Sleep,
159 -- Task is waiting on an accept or select with terminate
161 -- Acceptor_Delay_Sleep,
162 -- -- ??? Temporarily at end of list for GDB compatibility
163 -- -- Task is waiting on an selective wait statement
165 Entry_Caller_Sleep,
166 -- Task is waiting on an entry call
168 Async_Select_Sleep,
169 -- Task is waiting to start the abortable part of an
170 -- asynchronous select statement.
172 Delay_Sleep,
173 -- Task is waiting on a select statement with only a delay
174 -- alternative open.
176 Master_Completion_Sleep,
177 -- Master completion has two phases.
178 -- In Phase 1 the task is sleeping in Complete_Master
179 -- having completed a master within itself,
180 -- and is waiting for the tasks dependent on that master to become
181 -- terminated or waiting on a terminate Phase.
183 Master_Phase_2_Sleep,
184 -- In Phase 2 the task is sleeping in Complete_Master
185 -- waiting for tasks on terminate alternatives to finish
186 -- terminating.
188 -- The following are special uses of sleep, for server tasks
189 -- within the run-time system.
191 Interrupt_Server_Idle_Sleep,
192 Interrupt_Server_Blocked_Interrupt_Sleep,
193 Timer_Server_Sleep,
194 AST_Server_Sleep,
196 Asynchronous_Hold,
197 -- The task has been held by Asynchronous_Task_Control.Hold_Task
199 Interrupt_Server_Blocked_On_Event_Flag,
200 -- The task has been blocked on a system call waiting for a
201 -- completion event/signal to occur.
203 Activating,
204 -- Task has been created and is being made Runnable
206 Acceptor_Delay_Sleep
207 -- Task is waiting on an selective wait statement
210 type Call_Modes is
211 (Simple_Call, Conditional_Call, Asynchronous_Call, Timed_Call);
213 type Select_Modes is (Simple_Mode, Else_Mode, Terminate_Mode, Delay_Mode);
215 subtype Delay_Modes is Integer;
217 -------------------------------
218 -- Entry related definitions --
219 -------------------------------
221 Null_Entry : constant := 0;
223 Max_Entry : constant := Integer'Last;
225 Interrupt_Entry : constant := -2;
227 Cancelled_Entry : constant := -1;
229 type Entry_Index is range Interrupt_Entry .. Max_Entry;
231 Null_Task_Entry : constant := Null_Entry;
233 Max_Task_Entry : constant := Max_Entry;
235 type Task_Entry_Index is new Entry_Index
236 range Null_Task_Entry .. Max_Task_Entry;
238 type Entry_Call_Record;
240 type Entry_Call_Link is access all Entry_Call_Record;
242 type Entry_Queue is record
243 Head : Entry_Call_Link;
244 Tail : Entry_Call_Link;
245 end record;
247 type Task_Entry_Queue_Array is
248 array (Task_Entry_Index range <>) of Entry_Queue;
250 -- A data structure which contains the string names of entries and entry
251 -- family members.
253 type String_Access is access all String;
255 type Entry_Names_Array is
256 array (Entry_Index range <>) of String_Access;
258 type Entry_Names_Array_Access is access all Entry_Names_Array;
260 procedure Free_Entry_Names_Array (Obj : in out Entry_Names_Array);
261 -- Deallocate all string names contained in an entry names array
263 ----------------------------------
264 -- Entry_Call_Record definition --
265 ----------------------------------
267 type Entry_Call_State is
268 (Never_Abortable,
269 -- the call is not abortable, and never can be
271 Not_Yet_Abortable,
272 -- the call is not abortable, but may become so
274 Was_Abortable,
275 -- the call is not abortable, but once was
277 Now_Abortable,
278 -- the call is abortable
280 Done,
281 -- the call has been completed
283 Cancelled
284 -- the call was asynchronous, and was cancelled
286 pragma Ordered (Entry_Call_State);
288 -- Never_Abortable is used for calls that are made in a abort deferred
289 -- region (see ARM 9.8(5-11), 9.8 (20)). Such a call is never abortable.
291 -- The Was_ vs. Not_Yet_ distinction is needed to decide whether it is OK
292 -- to advance into the abortable part of an async. select stmt. That is
293 -- allowed iff the mode is Now_ or Was_.
295 -- Done indicates the call has been completed, without cancellation, or no
296 -- call has been made yet at this ATC nesting level, and so aborting the
297 -- call is no longer an issue. Completion of the call does not necessarily
298 -- indicate "success"; the call may be returning an exception if
299 -- Exception_To_Raise is non-null.
301 -- Cancelled indicates the call was cancelled, and so aborting the call is
302 -- no longer an issue.
304 -- The call is on an entry queue unless State >= Done, in which case it may
305 -- or may not be still Onqueue.
307 -- Please do not modify the order of the values, without checking all uses
308 -- of this type. We rely on partial "monotonicity" of
309 -- Entry_Call_Record.State to avoid locking when we access this value for
310 -- certain tests. In particular:
312 -- 1) Once State >= Done, we can rely that the call has been
313 -- completed. If State >= Done, it will not
314 -- change until the task does another entry call at this level.
316 -- 2) Once State >= Was_Abortable, we can rely that the call has
317 -- been queued abortably at least once, and so the check for
318 -- whether it is OK to advance to the abortable part of an
319 -- async. select statement does not need to lock anything.
321 type Restricted_Entry_Call_Record is record
322 Self : Task_Id;
323 -- ID of the caller
325 Mode : Call_Modes;
327 State : Entry_Call_State;
328 pragma Atomic (State);
329 -- Indicates part of the state of the call.
331 -- Protection: If the call is not on a queue, it should only be
332 -- accessed by Self, and Self does not need any lock to modify this
333 -- field.
335 -- Once the call is on a queue, the value should be something other
336 -- than Done unless it is cancelled, and access is controller by the
337 -- "server" of the queue -- i.e., the lock of Checked_To_Protection
338 -- (Call_Target) if the call record is on the queue of a PO, or the
339 -- lock of Called_Target if the call is on the queue of a task. See
340 -- comments on type declaration for more details.
342 Uninterpreted_Data : System.Address;
343 -- Data passed by the compiler
345 Exception_To_Raise : Ada.Exceptions.Exception_Id;
346 -- The exception to raise once this call has been completed without
347 -- being aborted.
348 end record;
349 pragma Suppress_Initialization (Restricted_Entry_Call_Record);
351 -------------------------------------------
352 -- Task termination procedure definition --
353 -------------------------------------------
355 -- We need to redefine here these types (already defined in
356 -- Ada.Task_Termination) for avoiding circular dependencies.
358 type Cause_Of_Termination is (Normal, Abnormal, Unhandled_Exception);
359 -- Possible causes for task termination:
361 -- Normal means that the task terminates due to completing the
362 -- last sentence of its body, or as a result of waiting on a
363 -- terminate alternative.
365 -- Abnormal means that the task terminates because it is being aborted
367 -- handled_Exception means that the task terminates because of exception
368 -- raised by the execution of its task_body.
370 type Termination_Handler is access protected procedure
371 (Cause : Cause_Of_Termination;
372 T : Task_Id;
373 X : Ada.Exceptions.Exception_Occurrence);
374 -- Used to represent protected procedures to be executed when task
375 -- terminates.
377 ------------------------------------
378 -- Task related other definitions --
379 ------------------------------------
381 type Activation_Chain is limited private;
382 -- Linked list of to-be-activated tasks, linked through
383 -- Activation_Link. The order of tasks on the list is irrelevant, because
384 -- the priority rules will ensure that they actually start activating in
385 -- priority order.
387 type Activation_Chain_Access is access all Activation_Chain;
389 type Task_Procedure_Access is access procedure (Arg : System.Address);
391 type Access_Boolean is access all Boolean;
393 function Detect_Blocking return Boolean;
394 pragma Inline (Detect_Blocking);
395 -- Return whether the Detect_Blocking pragma is enabled
397 function Storage_Size (T : Task_Id) return System.Parameters.Size_Type;
398 -- Retrieve from the TCB of the task the allocated size of its stack,
399 -- either the system default or the size specified by a pragma. This
400 -- is in general a non-static value that can depend on discriminants
401 -- of the task.
403 type Bit_Array is array (Integer range <>) of Boolean;
404 pragma Pack (Bit_Array);
406 subtype Debug_Event_Array is Bit_Array (1 .. 16);
408 Global_Task_Debug_Event_Set : Boolean := False;
409 -- Set True when running under debugger control and a task debug
410 -- event signal has been requested.
412 ----------------------------------------------
413 -- Ada_Task_Control_Block (ATCB) definition --
414 ----------------------------------------------
416 -- Notes on protection (synchronization) of TRTS data structures
418 -- Any field of the TCB can be written by the activator of a task when the
419 -- task is created, since no other task can access the new task's
420 -- state until creation is complete.
422 -- The protection for each field is described in a comment starting with
423 -- "Protection:".
425 -- When a lock is used to protect an ATCB field, this lock is simply named
427 -- Some protection is described in terms of tasks related to the
428 -- ATCB being protected. These are:
430 -- Self: The task which is controlled by this ATCB
431 -- Acceptor: A task accepting a call from Self
432 -- Caller: A task calling an entry of Self
433 -- Parent: The task executing the master on which Self depends
434 -- Dependent: A task dependent on Self
435 -- Activator: The task that created Self and initiated its activation
436 -- Created: A task created and activated by Self
438 -- Note: The order of the fields is important to implement efficiently
439 -- tasking support under gdb.
440 -- Currently gdb relies on the order of the State, Parent, Base_Priority,
441 -- Task_Image, Task_Image_Len, Call and LL fields.
443 -------------------------
444 -- Common ATCB section --
445 -------------------------
447 -- Section used by all GNARL implementations (regular and restricted)
449 type Common_ATCB is record
450 State : Task_States;
451 pragma Atomic (State);
452 -- Encodes some basic information about the state of a task,
453 -- including whether it has been activated, whether it is sleeping,
454 -- and whether it is terminated.
456 -- Protection: Self.L
458 Parent : Task_Id;
459 -- The task on which this task depends.
460 -- See also Master_Level and Master_Within.
462 Base_Priority : System.Any_Priority;
463 -- Base priority, not changed during entry calls, only changed
464 -- via dynamic priorities package.
466 -- Protection: Only written by Self, accessed by anyone
468 Base_CPU : System.Multiprocessors.CPU_Range;
469 -- Base CPU, only changed via dispatching domains package.
471 -- Protection: Self.L
473 Current_Priority : System.Any_Priority;
474 -- Active priority, except that the effects of protected object
475 -- priority ceilings are not reflected. This only reflects explicit
476 -- priority changes and priority inherited through task activation
477 -- and rendezvous.
479 -- Ada 95 notes: In Ada 95, this field will be transferred to the
480 -- Priority field of an Entry_Calls component when an entry call is
481 -- initiated. The Priority of the Entry_Calls component will not change
482 -- for the duration of the call. The accepting task can use it to boost
483 -- its own priority without fear of its changing in the meantime.
485 -- This can safely be used in the priority ordering of entry queues.
486 -- Once a call is queued, its priority does not change.
488 -- Since an entry call cannot be made while executing a protected
489 -- action, the priority of a task will never reflect a priority ceiling
490 -- change at the point of an entry call.
492 -- Protection: Only written by Self, and only accessed when Acceptor
493 -- accepts an entry or when Created activates, at which points Self is
494 -- suspended.
496 Protected_Action_Nesting : Natural;
497 pragma Atomic (Protected_Action_Nesting);
498 -- The dynamic level of protected action nesting for this task. This
499 -- field is needed for checking whether potentially blocking operations
500 -- are invoked from protected actions. pragma Atomic is used because it
501 -- can be read/written from protected interrupt handlers.
503 Task_Image : String (1 .. System.Parameters.Max_Task_Image_Length);
504 -- Hold a string that provides a readable id for task, built from the
505 -- variable of which it is a value or component.
507 Task_Image_Len : Natural;
508 -- Actual length of Task_Image
510 Call : Entry_Call_Link;
511 -- The entry call that has been accepted by this task.
513 -- Protection: Self.L. Self will modify this field when Self.Accepting
514 -- is False, and will not need the mutex to do so. Once a task sets
515 -- Pending_ATC_Level = 0, no other task can access this field.
517 LL : aliased Task_Primitives.Private_Data;
518 -- Control block used by the underlying low-level tasking service
519 -- (GNULLI).
521 -- Protection: This is used only by the GNULLI implementation, which
522 -- takes care of all of its synchronization.
524 Task_Arg : System.Address;
525 -- The argument to task procedure. Provide a handle for discriminant
526 -- information.
528 -- Protection: Part of the synchronization between Self and Activator.
529 -- Activator writes it, once, before Self starts executing. Thereafter,
530 -- Self only reads it.
532 Task_Alternate_Stack : System.Address;
533 -- The address of the alternate signal stack for this task, if any
535 -- Protection: Only accessed by Self
537 Task_Entry_Point : Task_Procedure_Access;
538 -- Information needed to call the procedure containing the code for
539 -- the body of this task.
541 -- Protection: Part of the synchronization between Self and Activator.
542 -- Activator writes it, once, before Self starts executing. Self reads
543 -- it, once, as part of its execution.
545 Compiler_Data : System.Soft_Links.TSD;
546 -- Task-specific data needed by the compiler to store per-task
547 -- structures.
549 -- Protection: Only accessed by Self
551 All_Tasks_Link : Task_Id;
552 -- Used to link this task to the list of all tasks in the system
554 -- Protection: RTS_Lock
556 Activation_Link : Task_Id;
557 -- Used to link this task to a list of tasks to be activated
559 -- Protection: Only used by Activator
561 Activator : Task_Id;
562 -- The task that created this task, either by declaring it as a task
563 -- object or by executing a task allocator. The value is null iff Self
564 -- has completed activation.
566 -- Protection: Set by Activator before Self is activated, and only read
567 -- and modified by Self after that.
569 Wait_Count : Integer;
570 -- This count is used by a task that is waiting for other tasks. At all
571 -- other times, the value should be zero. It is used differently in
572 -- several different states. Since a task cannot be in more than one of
573 -- these states at the same time, a single counter suffices.
575 -- Protection: Self.L
577 -- Activator_Sleep
579 -- This is the number of tasks that this task is activating, i.e. the
580 -- children that have started activation but have not completed it.
582 -- Protection: Self.L and Created.L. Both mutexes must be locked, since
583 -- Self.Activation_Count and Created.State must be synchronized.
585 -- Master_Completion_Sleep (phase 1)
587 -- This is the number dependent tasks of a master being completed by
588 -- Self that are not activated, not terminated, and not waiting on a
589 -- terminate alternative.
591 -- Master_Completion_2_Sleep (phase 2)
593 -- This is the count of tasks dependent on a master being completed by
594 -- Self which are waiting on a terminate alternative.
596 Elaborated : Access_Boolean;
597 -- Pointer to a flag indicating that this task's body has been
598 -- elaborated. The flag is created and managed by the
599 -- compiler-generated code.
601 -- Protection: The field itself is only accessed by Activator. The flag
602 -- that it points to is updated by Master and read by Activator; access
603 -- is assumed to be atomic.
605 Activation_Failed : Boolean;
606 -- Set to True if activation of a chain of tasks fails,
607 -- so that the activator should raise Tasking_Error.
609 Task_Info : System.Task_Info.Task_Info_Type;
610 -- System-specific attributes of the task as specified by the
611 -- Task_Info pragma.
613 Analyzer : System.Stack_Usage.Stack_Analyzer;
614 -- For storing informations used to measure the stack usage
616 Global_Task_Lock_Nesting : Natural;
617 -- This is the current nesting level of calls to
618 -- System.Tasking.Initialization.Lock_Task. This allows a task to call
619 -- Lock_Task multiple times without deadlocking. A task only locks
620 -- Global_Task_Lock when its Global_Task_Lock_Nesting goes from 0 to 1,
621 -- and only unlocked when it goes from 1 to 0.
623 -- Protection: Only accessed by Self
625 Fall_Back_Handler : Termination_Handler;
626 -- This is the fall-back handler that applies to the dependent tasks of
627 -- the task.
629 -- Protection: Self.L
631 Specific_Handler : Termination_Handler;
632 -- This is the specific handler that applies only to this task, and not
633 -- any of its dependent tasks.
635 -- Protection: Self.L
637 Debug_Events : Debug_Event_Array;
638 -- Word length array of per task debug events, of which 11 kinds are
639 -- currently defined in System.Tasking.Debugging package.
640 end record;
642 ---------------------------------------
643 -- Restricted_Ada_Task_Control_Block --
644 ---------------------------------------
646 -- This type should only be used by the restricted GNARLI and by restricted
647 -- GNULL implementations to allocate an ATCB (see System.Task_Primitives.
648 -- Operations.New_ATCB) that will take significantly less memory.
650 -- Note that the restricted GNARLI should only access fields that are
651 -- present in the Restricted_Ada_Task_Control_Block structure.
653 type Restricted_Ada_Task_Control_Block (Entry_Num : Task_Entry_Index) is
654 record
655 Common : Common_ATCB;
656 -- The common part between various tasking implementations
658 Entry_Call : aliased Restricted_Entry_Call_Record;
659 -- Protection: This field is used on entry call "queues" associated
660 -- with protected objects, and is protected by the protected object
661 -- lock.
662 end record;
663 pragma Suppress_Initialization (Restricted_Ada_Task_Control_Block);
665 Interrupt_Manager_ID : Task_Id;
666 -- This task ID is declared here to break circular dependencies.
667 -- Also declare Interrupt_Manager_ID after Task_Id is known, to avoid
668 -- generating unneeded finalization code.
670 -----------------------
671 -- List of all Tasks --
672 -----------------------
674 All_Tasks_List : Task_Id;
675 -- Global linked list of all tasks
677 ------------------------------------------
678 -- Regular (non restricted) definitions --
679 ------------------------------------------
681 --------------------------------
682 -- Master Related Definitions --
683 --------------------------------
685 subtype Master_Level is Integer;
686 subtype Master_ID is Master_Level;
688 -- Normally, a task starts out with internal master nesting level one
689 -- larger than external master nesting level. It is incremented to one by
690 -- Enter_Master, which is called in the task body only if the compiler
691 -- thinks the task may have dependent tasks. It is set to 1 for the
692 -- environment task, the level 2 is reserved for server tasks of the
693 -- run-time system (the so called "independent tasks"), and the level 3 is
694 -- for the library level tasks. Foreign threads which are detected by
695 -- the run-time have a level of 0, allowing these tasks to be easily
696 -- distinguished if needed.
698 Foreign_Task_Level : constant Master_Level := 0;
699 Environment_Task_Level : constant Master_Level := 1;
700 Independent_Task_Level : constant Master_Level := 2;
701 Library_Task_Level : constant Master_Level := 3;
703 -------------------
704 -- Priority info --
705 -------------------
707 Unspecified_Priority : constant Integer := System.Priority'First - 1;
709 Priority_Not_Boosted : constant Integer := System.Priority'First - 1;
710 -- Definition of Priority actually has to come from the RTS configuration
712 subtype Rendezvous_Priority is Integer
713 range Priority_Not_Boosted .. System.Any_Priority'Last;
715 -------------------
716 -- Affinity info --
717 -------------------
719 Unspecified_CPU : constant := -1;
720 -- No affinity specified
722 ------------------------------------
723 -- Rendezvous related definitions --
724 ------------------------------------
726 No_Rendezvous : constant := 0;
728 Max_Select : constant Integer := Integer'Last;
729 -- RTS-defined
731 subtype Select_Index is Integer range No_Rendezvous .. Max_Select;
732 -- type Select_Index is range No_Rendezvous .. Max_Select;
734 subtype Positive_Select_Index is
735 Select_Index range 1 .. Select_Index'Last;
737 type Accept_Alternative is record
738 Null_Body : Boolean;
739 S : Task_Entry_Index;
740 end record;
742 type Accept_List is
743 array (Positive_Select_Index range <>) of Accept_Alternative;
745 type Accept_List_Access is access constant Accept_List;
747 -----------------------------------
748 -- ATC_Level related definitions --
749 -----------------------------------
751 Max_ATC_Nesting : constant Natural := 20;
753 subtype ATC_Level_Base is Integer range 0 .. Max_ATC_Nesting;
755 ATC_Level_Infinity : constant ATC_Level_Base := ATC_Level_Base'Last;
757 subtype ATC_Level is ATC_Level_Base range 0 .. ATC_Level_Base'Last - 1;
759 subtype ATC_Level_Index is ATC_Level range 1 .. ATC_Level'Last;
761 ----------------------------------
762 -- Entry_Call_Record definition --
763 ----------------------------------
765 type Entry_Call_Record is record
766 Self : Task_Id;
767 -- ID of the caller
769 Mode : Call_Modes;
771 State : Entry_Call_State;
772 pragma Atomic (State);
773 -- Indicates part of the state of the call
775 -- Protection: If the call is not on a queue, it should only be
776 -- accessed by Self, and Self does not need any lock to modify this
777 -- field. Once the call is on a queue, the value should be something
778 -- other than Done unless it is cancelled, and access is controller by
779 -- the "server" of the queue -- i.e., the lock of Checked_To_Protection
780 -- (Call_Target) if the call record is on the queue of a PO, or the
781 -- lock of Called_Target if the call is on the queue of a task. See
782 -- comments on type declaration for more details.
784 Uninterpreted_Data : System.Address;
785 -- Data passed by the compiler
787 Exception_To_Raise : Ada.Exceptions.Exception_Id;
788 -- The exception to raise once this call has been completed without
789 -- being aborted.
791 Prev : Entry_Call_Link;
793 Next : Entry_Call_Link;
795 Level : ATC_Level;
796 -- One of Self and Level are redundant in this implementation, since
797 -- each Entry_Call_Record is at Self.Entry_Calls (Level). Since we must
798 -- have access to the entry call record to be reading this, we could
799 -- get Self from Level, or Level from Self. However, this requires
800 -- non-portable address arithmetic.
802 E : Entry_Index;
804 Prio : System.Any_Priority;
806 -- The above fields are those that there may be some hope of packing.
807 -- They are gathered together to allow for compilers that lay records
808 -- out contiguously, to allow for such packing.
810 Called_Task : Task_Id;
811 pragma Atomic (Called_Task);
812 -- Use for task entry calls. The value is null if the call record is
813 -- not in use. Conversely, unless State is Done and Onqueue is false,
814 -- Called_Task points to an ATCB.
816 -- Protection: Called_Task.L
818 Called_PO : System.Address;
819 pragma Atomic (Called_PO);
820 -- Similar to Called_Task but for protected objects
822 -- Note that the previous implementation tried to merge both
823 -- Called_Task and Called_PO but this ended up in many unexpected
824 -- complications (e.g having to add a magic number in the ATCB, which
825 -- caused gdb lots of confusion) with no real gain since the
826 -- Lock_Server implementation still need to loop around chasing for
827 -- pointer changes even with a single pointer.
829 Acceptor_Prev_Call : Entry_Call_Link;
830 -- For task entry calls only
832 Acceptor_Prev_Priority : Rendezvous_Priority := Priority_Not_Boosted;
833 -- For task entry calls only. The priority of the most recent prior
834 -- call being serviced. For protected entry calls, this function should
835 -- be performed by GNULLI ceiling locking.
837 Cancellation_Attempted : Boolean := False;
838 pragma Atomic (Cancellation_Attempted);
839 -- Cancellation of the call has been attempted.
840 -- Consider merging this into State???
842 With_Abort : Boolean := False;
843 -- Tell caller whether the call may be aborted
844 -- ??? consider merging this with Was_Abortable state
846 Needs_Requeue : Boolean := False;
847 -- Temporary to tell acceptor of task entry call that
848 -- Exceptional_Complete_Rendezvous needs to do requeue.
849 end record;
851 ------------------------------------
852 -- Task related other definitions --
853 ------------------------------------
855 type Access_Address is access all System.Address;
856 -- Anonymous pointer used to implement task attributes (see s-tataat.adb
857 -- and a-tasatt.adb)
859 pragma No_Strict_Aliasing (Access_Address);
860 -- This type is used in contexts where aliasing may be an issue (see
861 -- for example s-tataat.adb), so we avoid any incorrect aliasing
862 -- assumptions.
864 ----------------------------------------------
865 -- Ada_Task_Control_Block (ATCB) definition --
866 ----------------------------------------------
868 type Entry_Call_Array is array (ATC_Level_Index) of
869 aliased Entry_Call_Record;
871 type Direct_Index is range 0 .. Parameters.Default_Attribute_Count;
872 subtype Direct_Index_Range is Direct_Index range 1 .. Direct_Index'Last;
873 -- Attributes with indexes in this range are stored directly in the task
874 -- control block. Such attributes must be Address-sized. Other attributes
875 -- will be held in dynamically allocated records chained off of the task
876 -- control block.
878 type Direct_Attribute_Element is mod Memory_Size;
879 pragma Atomic (Direct_Attribute_Element);
881 type Direct_Attribute_Array is
882 array (Direct_Index_Range) of aliased Direct_Attribute_Element;
884 type Direct_Index_Vector is mod 2 ** Parameters.Default_Attribute_Count;
885 -- This is a bit-vector type, used to store information about
886 -- the usage of the direct attribute fields.
888 type Task_Serial_Number is mod 2 ** 64;
889 -- Used to give each task a unique serial number
891 type Ada_Task_Control_Block (Entry_Num : Task_Entry_Index) is record
892 Common : Common_ATCB;
893 -- The common part between various tasking implementations
895 Entry_Calls : Entry_Call_Array;
896 -- An array of entry calls
898 -- Protection: The elements of this array are on entry call queues
899 -- associated with protected objects or task entries, and are protected
900 -- by the protected object lock or Acceptor.L, respectively.
902 Entry_Names : Entry_Names_Array_Access := null;
903 -- An array of string names which denotes entry [family member] names.
904 -- The structure is indexed by task entry index and contains Entry_Num
905 -- components.
907 New_Base_Priority : System.Any_Priority;
908 -- New value for Base_Priority (for dynamic priorities package)
910 -- Protection: Self.L
912 Open_Accepts : Accept_List_Access;
913 -- This points to the Open_Accepts array of accept alternatives passed
914 -- to the RTS by the compiler-generated code to Selective_Wait. It is
915 -- non-null iff this task is ready to accept an entry call.
917 -- Protection: Self.L
919 Chosen_Index : Select_Index;
920 -- The index in Open_Accepts of the entry call accepted by a selective
921 -- wait executed by this task.
923 -- Protection: Written by both Self and Caller. Usually protected by
924 -- Self.L. However, once the selection is known to have been written it
925 -- can be accessed without protection. This happens after Self has
926 -- updated it itself using information from a suspended Caller, or
927 -- after Caller has updated it and awakened Self.
929 Master_of_Task : Master_Level;
930 -- The task executing the master of this task, and the ID of this task's
931 -- master (unique only among masters currently active within Parent).
933 -- Protection: Set by Activator before Self is activated, and read
934 -- after Self is activated.
936 Master_Within : Master_Level;
937 -- The ID of the master currently executing within this task; that is,
938 -- the most deeply nested currently active master.
940 -- Protection: Only written by Self, and only read by Self or by
941 -- dependents when Self is attempting to exit a master. Since Self will
942 -- not write this field until the master is complete, the
943 -- synchronization should be adequate to prevent races.
945 Alive_Count : Integer := 0;
946 -- Number of tasks directly dependent on this task (including itself)
947 -- that are still "alive", i.e. not terminated.
949 -- Protection: Self.L
951 Awake_Count : Integer := 0;
952 -- Number of tasks directly dependent on this task (including itself)
953 -- still "awake", i.e., are not terminated and not waiting on a
954 -- terminate alternative.
956 -- Invariant: Awake_Count <= Alive_Count
958 -- Protection: Self.L
960 -- Beginning of flags
962 Aborting : Boolean := False;
963 pragma Atomic (Aborting);
964 -- Self is in the process of aborting. While set, prevents multiple
965 -- abort signals from being sent by different aborter while abort
966 -- is acted upon. This is essential since an aborter which calls
967 -- Abort_To_Level could set the Pending_ATC_Level to yet a lower level
968 -- (than the current level), may be preempted and would send the
969 -- abort signal when resuming execution. At this point, the abortee
970 -- may have completed abort to the proper level such that the
971 -- signal (and resulting abort exception) are not handled any more.
972 -- In other words, the flag prevents a race between multiple aborters
974 -- Protection: protected by atomic access.
976 ATC_Hack : Boolean := False;
977 pragma Atomic (ATC_Hack);
978 -- ?????
979 -- Temporary fix, to allow Undefer_Abort to reset Aborting in the
980 -- handler for Abort_Signal that encloses an async. entry call.
981 -- For the longer term, this should be done via code in the
982 -- handler itself.
984 Callable : Boolean := True;
985 -- It is OK to call entries of this task
987 Dependents_Aborted : Boolean := False;
988 -- This is set to True by whichever task takes responsibility for
989 -- aborting the dependents of this task.
991 -- Protection: Self.L
993 Interrupt_Entry : Boolean := False;
994 -- Indicates if one or more Interrupt Entries are attached to the task.
995 -- This flag is needed for cleaning up the Interrupt Entry bindings.
997 Pending_Action : Boolean := False;
998 -- Unified flag indicating some action needs to be take when abort
999 -- next becomes undeferred. Currently set if:
1000 -- . Pending_Priority_Change is set
1001 -- . Pending_ATC_Level is changed
1002 -- . Requeue involving POs
1003 -- (Abortable field may have changed and the Wait_Until_Abortable
1004 -- has to recheck the abortable status of the call.)
1005 -- . Exception_To_Raise is non-null
1007 -- Protection: Self.L
1009 -- This should never be reset back to False outside of the procedure
1010 -- Do_Pending_Action, which is called by Undefer_Abort. It should only
1011 -- be set to True by Set_Priority and Abort_To_Level.
1013 Pending_Priority_Change : Boolean := False;
1014 -- Flag to indicate pending priority change (for dynamic priorities
1015 -- package). The base priority is updated on the next abort
1016 -- completion point (aka. synchronization point).
1018 -- Protection: Self.L
1020 Terminate_Alternative : Boolean := False;
1021 -- Task is accepting Select with Terminate Alternative
1023 -- Protection: Self.L
1025 -- End of flags
1027 -- Beginning of counts
1029 ATC_Nesting_Level : ATC_Level := 1;
1030 -- The dynamic level of ATC nesting (currently executing nested
1031 -- asynchronous select statements) in this task.
1033 -- Protection: Self_ID.L. Only Self reads or updates this field.
1034 -- Decrementing it deallocates an Entry_Calls component, and care must
1035 -- be taken that all references to that component are eliminated before
1036 -- doing the decrement. This in turn will require locking a protected
1037 -- object (for a protected entry call) or the Acceptor's lock (for a
1038 -- task entry call). No other task should attempt to read or modify
1039 -- this value.
1041 Deferral_Level : Natural := 1;
1042 -- This is the number of times that Defer_Abort has been called by
1043 -- this task without a matching Undefer_Abort call. Abortion is only
1044 -- allowed when this zero. It is initially 1, to protect the task at
1045 -- startup.
1047 -- Protection: Only updated by Self; access assumed to be atomic
1049 Pending_ATC_Level : ATC_Level_Base := ATC_Level_Infinity;
1050 -- The ATC level to which this task is currently being aborted. If the
1051 -- value is zero, the entire task has "completed". That may be via
1052 -- abort, exception propagation, or normal exit. If the value is
1053 -- ATC_Level_Infinity, the task is not being aborted to any level. If
1054 -- the value is positive, the task has not completed. This should ONLY
1055 -- be modified by Abort_To_Level and Exit_One_ATC_Level.
1057 -- Protection: Self.L
1059 Serial_Number : Task_Serial_Number;
1060 -- A growing number to provide some way to check locking rules/ordering
1062 Known_Tasks_Index : Integer := -1;
1063 -- Index in the System.Tasking.Debug.Known_Tasks array
1065 User_State : Long_Integer := 0;
1066 -- User-writeable location, for use in debugging tasks; also provides a
1067 -- simple task specific data.
1069 Direct_Attributes : Direct_Attribute_Array;
1070 -- For task attributes that have same size as Address
1072 Is_Defined : Direct_Index_Vector := 0;
1073 -- Bit I is 1 iff Direct_Attributes (I) is defined
1075 Indirect_Attributes : Access_Address;
1076 -- A pointer to chain of records for other attributes that are not
1077 -- address-sized, including all tagged types.
1079 Entry_Queues : Task_Entry_Queue_Array (1 .. Entry_Num);
1080 -- An array of task entry queues
1082 -- Protection: Self.L. Once a task has set Self.Stage to Completing, it
1083 -- has exclusive access to this field.
1084 end record;
1086 --------------------
1087 -- Initialization --
1088 --------------------
1090 procedure Initialize;
1091 -- This procedure constitutes the first part of the initialization of the
1092 -- GNARL. This includes creating data structures to make the initial thread
1093 -- into the environment task. The last part of the initialization is done
1094 -- in System.Tasking.Initialization or System.Tasking.Restricted.Stages.
1095 -- All the initializations used to be in Tasking.Initialization, but this
1096 -- is no longer possible with the run time simplification (including
1097 -- optimized PO and the restricted run time) since one cannot rely on
1098 -- System.Tasking.Initialization being present, as was done before.
1100 procedure Initialize_ATCB
1101 (Self_ID : Task_Id;
1102 Task_Entry_Point : Task_Procedure_Access;
1103 Task_Arg : System.Address;
1104 Parent : Task_Id;
1105 Elaborated : Access_Boolean;
1106 Base_Priority : System.Any_Priority;
1107 Base_CPU : System.Multiprocessors.CPU_Range;
1108 Task_Info : System.Task_Info.Task_Info_Type;
1109 Stack_Size : System.Parameters.Size_Type;
1110 T : Task_Id;
1111 Success : out Boolean);
1112 -- Initialize fields of a TCB and link into global TCB structures Call
1113 -- this only with abort deferred and holding RTS_Lock. Need more
1114 -- documentation, mention T, and describe Success ???
1116 private
1118 Null_Task : constant Task_Id := null;
1120 type Activation_Chain is limited record
1121 T_ID : Task_Id;
1122 end record;
1124 -- Activation_Chain is an in-out parameter of initialization procedures and
1125 -- it must be passed by reference because the init proc may terminate
1126 -- abnormally after creating task components, and these must be properly
1127 -- registered for removal (Expunge_Unactivated_Tasks). The "limited" forces
1128 -- Activation_Chain to be a by-reference type; see RM-6.2(4).
1130 end System.Tasking;