1 # Makefile for GNU C compiler.
2 # Copyright (C) 1987, 88, 90-98, 1999 Free Software Foundation, Inc.
4 #This file is part of GNU CC.
6 #GNU CC is free software; you can redistribute it and/or modify
7 #it under the terms of the GNU General Public License as published by
8 #the Free Software Foundation; either version 2, or (at your option)
11 #GNU CC is distributed in the hope that it will be useful,
12 #but WITHOUT ANY WARRANTY; without even the implied warranty of
13 #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 #GNU General Public License for more details.
16 #You should have received a copy of the GNU General Public License
17 #along with GNU CC; see the file COPYING. If not, write to
18 #the Free Software Foundation, 59 Temple Place - Suite 330,
19 #Boston MA 02111-1307, USA.
21 # The targets for external use include:
22 # all, doc, proto, install, install-cross, install-cross-rest,
23 # uninstall, TAGS, mostlyclean, clean, distclean, maintainer-clean,
24 # stage1, stage2, stage3, stage4.
26 # Suppress smart makes who think they know how to automake Yacc files
29 # Directory where sources are, from where we are.
33 # Variables that exist for you to override.
34 # See below for how to change them for certain systems.
36 # List of language subdirectories.
37 # This is overridden by configure.
40 # Selection of languages to be made.
41 # This is overridden by configure.
42 CONFIG_LANGUAGES
= @all_languages@
43 LANGUAGES
= c proto gcov
$(exeext
) $(CONFIG_LANGUAGES
)
45 # Languages should create dependencies of $(INTL_TARGETS) on generated
46 # sources in Make-lang.in. Example:
47 # $(INTL_TARGETS): $(srcdir)/cp/parse.c
48 INTL_TARGETS
= intl.
all intl.
install intl.distdir
50 # Selection of languages to be made during stage1 build.
51 # This is overridden by configure.
52 BOOT_LANGUAGES
= c @all_boot_languages@
58 # Various ways of specifying flags for compilations:
59 # CFLAGS is for the user to override to, e.g., do a bootstrap with -O2.
60 # BOOT_CFLAGS is the value of CFLAGS to pass
61 # to the stage2 and stage3 compilations
62 # WARN_CFLAGS are the warning flags to pass to stage2 and stage3.
63 # (And for stage 1 if the native compiler is GCC.) It is
64 # separate from BOOT_CFLAGS because people tend to override optimization
65 # flags and we'd like them to still have warnings turned on. They are free
66 # to explicitly turn warnings off if they wish.
67 # XCFLAGS is used for most compilations but not when using the GCC just built.
68 # TCFLAGS is used for compilations with the GCC just built.
71 CFLAGS
= -g @stage1_warn_cflags@
72 BOOT_CFLAGS
= -O2
$(CFLAGS
)
73 WARN_CFLAGS
= -W
-Wall
74 # These exists to be overridden by the x-* and t-* files, respectively.
83 # srcdir might be a relative pathname which won't be valid in a subdirectory,
84 # so we must use objdir/srcdir instead to make it safe. objdir is always
86 BISON
= `if [ -f $(objdir)/../bison/bison ] ; then case $(srcdir) in \
87 /*) echo $(objdir)/../bison/bison -L $(srcdir)/../bison/ ;; \
88 *) echo $(objdir)/../bison/bison -L $(objdir)/$(srcdir)/../bison/ ;; \
89 esac; else echo bison ; fi`
91 LEX
= `if [ -f $(objdir)/../flex/flex ] ; then echo $(objdir)/../flex/flex ; else echo flex ; fi`
98 # on sysV, define this as cp.
100 # Some systems may be missing symbolic links, regular links, or both.
101 # Allow configure to check this and use "ln -s", "ln", or "cp" as appropriate.
104 # These permit overriding just for certain files.
105 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
106 INSTALL_DATA
= @INSTALL_DATA@
107 MAKEINFO
= `if [ -f $(objdir)/../texinfo/makeinfo/Makefile ] ; \
108 then echo $(objdir)/../texinfo/makeinfo/makeinfo ; \
109 else echo makeinfo ; fi`
112 # For GNUmake: let us decide what gets passed to recursive makes.
116 # Define this as & to perform parallel make on a Sequent.
117 # Note that this has some bugs, and it seems currently necessary
118 # to compile all the gen* files first by hand to avoid erroneous results.
121 # How to invoke ranlib.
123 # Test to use to see whether ranlib exists on the system.
126 ||
[ -f
/usr
/bin
/ranlib
-o
-f
/bin
/ranlib
]
128 # Compiler to use for compiling libgcc1.a.
129 # OLDCC should not be the GNU C compiler,
130 # since that would compile typical libgcc1.a functions such as mulsi3
131 # into infinite recursions.
134 # CFLAGS for use with OLDCC, for compiling libgcc1.a.
135 # NOTE: -O does not work on some Unix systems!
138 # Version of ar to use when compiling libgcc1.a.
142 # Target to use when installing include directory. Either
143 # install-headers-tar or install-headers-cpio.
144 INSTALL_HEADERS_DIR
= @build_install_headers_dir@
146 # Header files that are made available under the same name
147 # to programs compiled with GCC.
148 USER_H
= $(srcdir)/ginclude
/stdarg.h
$(srcdir)/ginclude
/stddef.h \
149 $(srcdir)/ginclude
/varargs.h
$(srcdir)/ginclude
/va-alpha.h \
150 $(srcdir)/ginclude
/va-h8300.h
$(srcdir)/ginclude
/va-i860.h \
151 $(srcdir)/ginclude
/va-i960.h
$(srcdir)/ginclude
/va-mips.h \
152 $(srcdir)/ginclude
/va-m88k.h
$(srcdir)/ginclude
/va-mn10200.h \
153 $(srcdir)/ginclude
/va-mn10300.h
$(srcdir)/ginclude
/va-pa.h \
154 $(srcdir)/ginclude
/va-pyr.h
$(srcdir)/ginclude
/va-sparc.h \
155 $(srcdir)/ginclude
/va-clipper.h
$(srcdir)/ginclude
/va-spur.h \
156 $(srcdir)/ginclude
/va-m32r.h
$(srcdir)/ginclude
/va-sh.h \
157 $(srcdir)/ginclude
/va-v850.h
$(srcdir)/ginclude
/va-arc.h \
158 $(srcdir)/ginclude
/iso646.h
$(srcdir)/ginclude
/va-ppc.h \
159 $(srcdir)/ginclude
/va-c4x.h
$(EXTRA_HEADERS
) $(LANG_EXTRA_HEADERS
) \
160 $(srcdir)/ginclude
/proto.h
$(srcdir)/ginclude
/stdbool.h
162 # Target to use whe installing assert.h. Some systems may
163 # want to set this empty.
164 INSTALL_ASSERT_H
= install-assert-h
166 # The GCC to use for compiling libgcc2.a, enquire, and libgcc1-test.
167 # Usually the one we just built.
168 # Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
169 GCC_FOR_TARGET
= .
/xgcc
-B.
/ -B
$(build_tooldir
)/bin
/ -I
$(build_tooldir
)/include
171 # This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
172 # It omits XCFLAGS, and specifies -B./.
173 # It also specifies -I./include to find, e.g., stddef.h.
174 GCC_CFLAGS
=$(INTERNAL_CFLAGS
) $(X_CFLAGS
) $(T_CFLAGS
) $(CFLAGS
) -I.
/include $(TCFLAGS
)
176 # Sed command to transform gcc to installed name. Overwritten by configure.
177 program_transform_name
= @program_transform_name@
178 program_transform_cross_name
= s
,^
,$(target_alias
)-,
180 build_canonical
= @build_canonical@
181 host_canonical
= @host_canonical@
183 # Tools to use when building a cross-compiler.
184 # These are used because `configure' appends `cross-make'
185 # to the makefile when making a cross-compiler.
187 # Use the tools from the build tree, if they are available.
189 # objdir is set by configure.
193 if [ -f $(objdir)/../binutils/ar ] ; then \
194 echo $(objdir)/../binutils/ar ; \
196 if [ "$(host_canonical)" = "$(target)" ] ; then \
199 t='$(program_transform_name)'; echo ar | sed -e $$t ; \
202 AR_FLAGS_FOR_TARGET
= rc
203 RANLIB_FOR_TARGET
= ` \
204 if [ -f $(objdir)/../binutils/ranlib ] ; then \
205 echo $(objdir)/../binutils/ranlib ; \
207 if [ "$(host_canonical)" = "$(target)" ] ; then \
210 t='$(program_transform_name)'; echo ranlib | sed -e $$t ; \
213 RANLIB_TEST_FOR_TARGET
= \
214 [ -f
$(RANLIB_FOR_TARGET
) ] \
215 ||
( [ "$(host_canonical)" = "$(target)" ] \
216 && [ -f
/usr
/bin
/ranlib
-o
-f
/bin
/ranlib
] )
218 # Dir to search for system headers. Overridden by cross-make.
219 SYSTEM_HEADER_DIR
= /usr
/include
221 # Control whether to run fixproto.
222 STMP_FIXPROTO
= stmp-fixproto
224 # Test to see whether <limits.h> exists in the system header files.
225 LIMITS_H_TEST
= [ -f
$(SYSTEM_HEADER_DIR
)/limits.h
]
227 # There may be a premade insn-attrtab.c for this machine.
228 # (You could rebuild it with genattrtab as usual, but it takes a long time.)
229 # PREMADE_ATTRTAB is the file name of the file to use.
230 # PREMADE_ATTRTAB_MD is the md file it corresponds to.
231 PREMADE_ATTRTAB_MD
= Makefile
# Guaranteed not to cmp equal to md.
235 target_alias
=@target_alias@
236 xmake_file
=@dep_host_xmake_file@
237 tmake_file
=@dep_tmake_file@
238 out_file
=$(srcdir)/config
/@out_file@
239 out_object_file
=@out_object_file@
240 md_file
=$(srcdir)/config
/@md_file@
241 tm_file
=@tm_file_list@
242 build_xm_file
=@build_xm_file_list@
243 host_xm_file
=@host_xm_file_list@
244 lang_specs_files
=@lang_specs_files@
245 lang_options_files
=@lang_options_files@
246 lang_tree_files
=@lang_tree_files@
247 GCC_THREAD_FILE
=@thread_file@
248 OBJC_BOEHM_GC
=@objc_boehm_gc@
250 GTHREAD_FLAGS
=@gthread_flags@
251 # Be prepared for gcc2 merges.
252 gcc_version
=@gcc_version@
253 gcc_version_trigger
=@gcc_version_trigger@
254 version
=$(gcc_version
)
255 mainversion
=`sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/' < $(srcdir)/version.c`
257 # Common prefix for installation directories.
258 # NOTE: This directory must exist when you start installation.
260 # Directory in which to put localized header files. On the systems with
261 # gcc as the native cc, `local_prefix' may not be `prefix' which is
263 # NOTE: local_prefix *should not* default from prefix.
264 local_prefix
= @local_prefix@
265 # Directory in which to put host dependent programs and libraries
266 exec_prefix = @
exec_prefix@
267 # Directory in which to put the executable for the command `gcc'
269 # Directory in which to put the directories used by the compiler.
271 # Directory in which the compiler finds executables, libraries, etc.
272 libsubdir
= $(libdir)/gcc-lib
/$(target_alias
)/$(version
)
273 # Used to produce a relative $(gcc_tooldir) in gcc.o
274 unlibsubdir
= ..
/..
/..
275 # Directory in which to find other cross-compilation tools and headers.
277 # Used in install-cross.
278 gcc_tooldir
= @gcc_tooldir@
279 # Since tooldir does not exist at build-time, use -B$(build_tooldir)/bin/
280 build_tooldir
= $(exec_prefix)/$(target_alias
)
281 # Directory in which the compiler finds g++ includes.
282 gcc_gxx_include_dir
= @gcc_gxx_include_dir@
283 # Directory to search for site-specific includes.
284 includedir = $(local_prefix
)/include
285 # assertdir is overridden in cross-make.
286 # (But this currently agrees with what is in cross-make.)
287 assertdir
= $(gcc_tooldir
)/include
288 # where the info files go
290 # Where cpp should go besides $prefix/bin if necessary
291 cpp_install_dir
= @cpp_install_dir@
292 # where the locale files go
293 datadir = $(prefix)/@DATADIRNAME@
294 localedir
= $(datadir)/locale
295 # Extension (if any) to put in installed man-page filename.
298 exeext
= @host_exeext@
299 build_exeext
= @build_exeext@
301 # Directory in which to put man pages.
303 man1dir = $(mandir)/man1
304 # Dir for temp files.
307 # Top build directory, relative to here.
310 # Whether we were configured with NLS.
313 # Internationalization library.
314 INTLLIBS
= @INTLLIBS@
316 # List of internationalization subdirectories.
318 INTL_SUBDIRS
= intl
$(POSUB
)
320 # Additional system libraries to link with.
323 # Change this to a null string if obstacks are installed in the
327 # Configure will set these if you need vfprintf and possibly _doprnt support.
331 # Specify the rule for actually making libgcc.a,
333 # and the rule for installing it.
334 INSTALL_LIBGCC
= install-libgcc
336 # Specify the rule for actually making libgcc1.a.
337 # The value may be empty; that means to do absolutely nothing
338 # with or for libgcc1.a.
341 # Specify the rule for making libgcc1.a for a cross-compiler.
342 # The default rule assumes that libgcc1.a is supplied by the user.
343 CROSS_LIBGCC1
= libgcc1.cross
345 # Specify the rule for actually making libgcc2.a.
348 # Options to use when compiling libgcc2.a.
349 # -g1 causes output of debug info only for file-scope entities.
350 # we use this here because that should be enough, and also
351 # so that -g1 will be tested.
353 LIBGCC2_DEBUG_CFLAGS
= -g1
354 LIBGCC2_CFLAGS
= -O2
$(LIBGCC2_INCLUDES
) $(GCC_CFLAGS
) $(TARGET_LIBGCC2_CFLAGS
) $(LIBGCC2_DEBUG_CFLAGS
) $(GTHREAD_FLAGS
) -DIN_LIBGCC2
-D__GCC_FLOAT_NOT_NEEDED @inhibit_libc@
356 # Additional options to use when compiling libgcc2.a.
357 # Some targets override this to -Iinclude
360 # Additional target-dependent options for compiling libgcc2.a.
361 TARGET_LIBGCC2_CFLAGS
=
363 # Things which must be built before building libgcc2.a.
364 # Some targets override this to stmp-int-hdrs
367 # libgcc1-test target (must also be overridable for a target)
368 LIBGCC1_TEST
= libgcc1-test
370 # List of extra executables that should be compiled for this target machine
371 # that are used for compiling from source code to object code.
372 # The rules for compiling them should be in the t-* file for the machine.
373 EXTRA_PASSES
=@extra_passes@
375 # Like EXTRA_PASSES, but these are used when linking.
376 EXTRA_PROGRAMS
= @extra_programs@
378 # List of extra object files that should be compiled for this target machine.
379 # The rules for compiling them should be in the t-* file for the machine.
380 EXTRA_PARTS
= @extra_parts@
382 # List of extra object files that should be compiled and linked with
383 # compiler proper (cc1, cc1obj, cc1plus).
384 EXTRA_OBJS
= @extra_objs@
386 # List of extra object files that should be compiled and linked with
388 EXTRA_GCC_OBJS
=@host_extra_gcc_objs@
390 # List of additional header files to install.
391 # Often this is edited directly by `configure'.
392 EXTRA_HEADERS
=@extra_headers_list@
394 # Set this to `collect2' to enable use of collect2.
395 USE_COLLECT2
= @will_use_collect2@
396 # If we might be using collect2, then this variable will be set to
397 # -DUSE_COLLECT2. toplev.c, collect2.c and libgcc2.c all need to
398 # if we may be using collect2.
399 MAYBE_USE_COLLECT2
= @maybe_use_collect2@
400 # It is convenient for configure to add the assignment at the beginning,
401 # so don't override it here.
402 USE_COLLECT2
= collect2
$(exeext
)
404 # List of extra C and assembler files to add to libgcc1.a.
405 # Assembler files should have names ending in `.asm'.
408 # List of extra C and assembler files to add to libgcc2.a.
409 # Assembler files should have names ending in `.asm'.
412 # Handle cpp installation.
416 # We do not try to build float.h anymore. Let configure select the
417 # appropriate pre-built float.h file for the target.
418 FLOAT_H
=@float_h_file@
420 # Program to convert libraries.
423 # Control whether header files are installed.
424 INSTALL_HEADERS
=install-headers
426 # Options for tar when copying trees. So HPUX can override it.
429 # Additional directories of header files to run fixincludes on.
430 # These should be directories searched automatically by default
431 # just as /usr/include is.
432 # *Do not* use this for directories that happen to contain
433 # header files, but are not searched automatically by default.
434 # On most systems, this is empty.
435 OTHER_FIXINCLUDES_DIRS
=
437 # A list of all the language-specific executables.
438 # This is overridden by configure.
439 COMPILERS
= cc1
$(exeext
) @all_compilers@
441 # List of things which should already be built whenever we try to use xgcc
442 # to compile anything (without linking).
443 GCC_PASSES
=xgcc
$(exeext
) cc1
$(exeext
) cpp$(exeext
) $(EXTRA_PASSES
)
445 # List of things which should already be built whenever we try to use xgcc
447 GCC_PARTS
=$(GCC_PASSES
) $(LIBGCC
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
) $(EXTRA_PARTS
)
449 # Directory to link to, when using the target `maketest'.
452 # Guaranteed to not exist when not passing md through cpp.
453 # This value is overridden directly by configure.
454 MD_FILE
= md-cpp-not-used
456 # Flags to use when cross-building GCC.
457 # Prefix to apply to names of object files when using them
458 # to run on the machine we are compiling on.
460 # Prefix to apply to names of object files when compiling them
461 # to run on the machine we are compiling on.
462 # The default for this variable is chosen to keep these rules
463 # out of the way of the other rules for compiling the same source files.
466 HOST_CFLAGS
=$(ALL_CFLAGS
)
468 HOST_INTLLIBS
=$(INTLLIBS
)
469 HOST_LDFLAGS
=$(LDFLAGS
)
470 HOST_CPPFLAGS
=$(ALL_CPPFLAGS
)
471 HOST_ALLOCA
=$(ALLOCA
)
472 HOST_MALLOC
=$(MALLOC
)
473 HOST_OBSTACK
=$(OBSTACK
)
474 HOST_VFPRINTF
=$(VFPRINTF
)
475 HOST_DOPRINT
=$(DOPRINT
)
477 # Actual name to use when installing a native compiler.
478 GCC_INSTALL_NAME
= `t='$(program_transform_name)'; echo gcc | sed -e $$t`
479 CPP_INSTALL_NAME
= `t='$(program_transform_name)'; echo cpp | sed -e $$t`
480 PROTOIZE_INSTALL_NAME
= `t='$(program_transform_name)'; echo protoize | sed -e $$t`
481 UNPROTOIZE_INSTALL_NAME
= `t='$(program_transform_name)'; echo unprotoize | sed -e $$t`
482 GCOV_INSTALL_NAME
= `t='$(program_transform_name)'; echo gcov | sed -e $$t`
484 # Actual name to use when installing a cross-compiler.
485 GCC_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo gcc | sed -e $$t`
486 PROTOIZE_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo protoize | sed -e $$t`
487 UNPROTOIZE_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo unprotoize | sed -e $$t`
489 # Choose the real default target.
492 # Choose the real install target.
493 INSTALL_TARGET
=install-normal
495 # Setup the testing framework, if you have one
496 EXPECT
= `if [ -f $${rootme}/../expect/expect ] ; then \
497 echo $${rootme}/../expect/expect ; \
498 else echo expect ; fi`
500 RUNTEST
= `if [ -f $${srcdir}/../dejagnu/runtest ] ; then \
501 echo $${srcdir}/../dejagnu/runtest ; \
502 else echo runtest; fi`
505 # Extra symbols for fixproto to define when parsing headers.
508 # Extra flags to use when compiling crt{begin,end}.o.
511 # Extra flags to use when compiling [m]crt0.o.
514 # "t" or nothing, for building multilibbed versions of, say, crtbegin.o.
517 # End of variables for you to override.
519 # Definition of `all' is here so that new rules inserted by sed
520 # do not specify the default target.
521 # The real definition is under `all.internal' (for native compilers)
522 # or `all.cross' (for cross compilers).
525 # This tells GNU Make version 3 not to put all variables in the environment.
528 # sed inserts variable overrides after the following line.
542 # Now figure out from those variables how to compile and link.
546 # IN_GCC tells various files that system.h, toplev.c, etc are available.
547 INTERNAL_CFLAGS
= $(CROSS
) -DIN_GCC
$(SCHED_CFLAGS
) @extra_c_flags@
549 # This is the variable actually used when we compile.
550 # If you change this line, you probably also need to change the definition
551 # of HOST_CFLAGS in build-make to match.
552 ALL_CFLAGS
= $(INTERNAL_CFLAGS
) $(X_CFLAGS
) $(T_CFLAGS
) $(CFLAGS
) $(XCFLAGS
) \
556 ALL_CPPFLAGS
= $(CPPFLAGS
) $(X_CPPFLAGS
) $(T_CPPFLAGS
)
558 # Even if ALLOCA is set, don't use it if compiling with GCC.
559 USE_ALLOCA
= ${ALLOCA}
560 USE_HOST_ALLOCA
= ` case "${HOST_ALLOCA}" in ?*) echo ${HOST_PREFIX}${HOST_ALLOCA} ;; esac `
561 USE_HOST_MALLOC
= ` case "${HOST_MALLOC}" in ?*) echo ${HOST_PREFIX}${HOST_MALLOC} ;; esac `
562 USE_HOST_OBSTACK
= ` case "${HOST_OBSTACK}" in ?*) echo ${HOST_PREFIX}${HOST_OBSTACK} ;; esac `
563 USE_HOST_VFPRINTF
= ` case "${HOST_VFPRINTF}" in ?*) echo ${HOST_PREFIX}${HOST_VFPRINTF} ;; esac `
564 USE_HOST_DOPRINT
= ` case "${HOST_DOPRINT}" in ?*) echo ${HOST_PREFIX}${HOST_DOPRINT} ;; esac `
566 # Dependency on obstack, alloca, malloc or whatever library facilities
567 # are not installed in the system libraries.
568 # We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
569 LIBDEPS
= $(INTLLIBS
) $(OBSTACK
) $(ALLOCA
) $(MALLOC
) $(VFPRINTF
) $(DOPRINT
)
571 # Likewise, for use in the tools that must run on this machine
572 # even if we are cross-building GCC.
573 # We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
574 HOST_LIBDEPS
= $(HOST_PREFIX
)$(HOST_INTLLIBS
) $(HOST_PREFIX
)$(HOST_OBSTACK
) $(HOST_PREFIX
)$(HOST_ALLOCA
) $(HOST_PREFIX
)$(HOST_MALLOC
) $(HOST_PREFIX
)$(HOST_VFPRINTF
) $(HOST_PREFIX
)$(HOST_DOPRINT
)
576 # How to link with both our special library facilities
577 # and the system's installed libraries.
578 LIBS
= $(OBSTACK
) $(USE_ALLOCA
) $(MALLOC
) $(INTLLIBS
) @LIBS@
$(VFPRINTF
) $(DOPRINT
) $(CLIB
) ..
/libiberty
/libiberty.a
580 # Likewise, for use in the tools that must run on this machine
581 # even if we are cross-building GCC.
582 HOST_LIBS
= $(USE_HOST_OBSTACK
) $(USE_HOST_ALLOCA
) $(USE_HOST_MALLOC
) \
583 $(HOST_INTLLIBS
) $(USE_HOST_VFPRINTF
) $(USE_HOST_DOPRINT
) \
586 HOST_RTL
= $(HOST_PREFIX
)rtl.o
$(HOST_PREFIX
)bitmap.o
587 HOST_RTLANAL
= $(HOST_PREFIX
)rtlanal.o
588 HOST_PRINT
= $(HOST_PREFIX
)print-rtl.o
590 # Specify the directories to be searched for header files.
591 # Both . and srcdir are used, in that order,
592 # so that tm.h and config.h will be found in the compilation
593 # subdirectory rather than in the source directory.
594 INCLUDES
= -I.
-I
$(srcdir) -I
$(srcdir)/config
-I
$(srcdir)/..
/include
596 # Always use -I$(srcdir)/config when compiling.
598 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $<
600 # This tells GNU make version 3 not to export all the variables
601 # defined in this file into the environment.
604 # Support for additional languages (other than c and objc).
605 # ??? objc can be supported this way too (leave for later).
607 # These next lines are overridden by configure.
608 LANG_MAKEFILES
= @all_lang_makefiles@
609 LANG_STAGESTUFF
= @all_stagestuff@
610 LANG_DIFF_EXCLUDES
= @all_diff_excludes@
611 LANG_LIB2FUNCS
= @all_lib2funcs@
612 LANG_EXTRA_HEADERS
= @all_headers@
614 # Flags to pass to recursive makes.
615 # CC is set by configure. Hosts without symlinks need special handling
616 # because we need CC="stage1/xgcc -Bstage1/" to work in the language
618 # ??? The choices here will need some experimenting with.
619 ORDINARY_FLAGS_TO_PASS
= \
620 "AR_FLAGS_FOR_TARGET=$(AR_FLAGS_FOR_TARGET)" \
621 "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
623 "BISONFLAGS=$(BISONFLAGS)" \
626 "GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
627 "LDFLAGS=$(LDFLAGS)" \
629 "LEXFLAGS=$(LEXFLAGS)" \
632 "MAKEINFO=$(MAKEINFO)" \
633 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
634 "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
635 "RANLIB_TEST_FOR_TARGET=$(RANLIB_TEST_FOR_TARGET)" \
637 "STAGE_PREFIX=@stage_prefix_set_by_configure@" \
639 "build_exeext=$(build_exeext)" \
641 "exec_prefix=$(exec_prefix)" \
643 "local_prefix=$(local_prefix)" \
644 "gxx_include_dir=$(gcc_gxx_include_dir)" \
645 "tooldir=$(tooldir)" \
646 "gcc_tooldir=$(gcc_tooldir)" \
648 "libsubdir=$(libsubdir)" \
649 "datadir=$(datadir)" \
650 "distdir=../tmp/\$$(subdir)" \
651 "localedir=$(localedir)"
652 FLAGS_TO_PASS
= $(ORDINARY_FLAGS_TO_PASS
) "CC=@cc_set_by_configure@"
653 PREPEND_DOTDOT_TO_RELATIVE_PATHS
= sed \
654 -e
's|^ *[^ /][^ /]*/|%&|' \
656 -e
's|% *[^- /]|%&|g' \
659 SUBDIR_FLAGS_TO_PASS
= $(ORDINARY_FLAGS_TO_PASS
) \
660 "CC=`echo @quoted_cc_set_by_configure@ | $(PREPEND_DOTDOT_TO_RELATIVE_PATHS)`"
662 # Lists of files for various purposes.
664 # Language-specific object files for C and Objective C.
665 C_AND_OBJC_OBJS
= c-lex.o c-pragma.o c-decl.o c-typeck.o c-convert.o \
666 c-aux-info.o c-common.o c-iterate.o @extra_c_objs@
668 # Language-specific object files for C.
669 C_OBJS
= c-parse.o c-lang.o
$(C_AND_OBJC_OBJS
)
671 SCHED_PREFIX
= @sched_prefix@
672 SCHED_CFLAGS
= @sched_cflags@
674 # Language-independent object files.
675 OBJS
= toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
676 function.o stmt.o except.o expr.o calls.o expmed.o explow.o optabs.o \
677 intl.o varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o genrtl.o real.o \
678 dbxout.o sdbout.o dwarfout.o dwarf2out.o xcoffout.o bitmap.o alias.o gcse.o \
679 integrate.o jump.o cse.o loop.o unroll.o flow.o stupid.o combine.o varray.o \
680 regclass.o regmove.o local-alloc.o global.o reload.o reload1.o caller-save.o \
681 insn-peep.o reorg.o
$(SCHED_PREFIX
)sched.o final.o recog.o reg-stack.o \
682 insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o lcm.o \
683 profile.o insn-attrtab.o
$(out_object_file
) getpwd.o
$(EXTRA_OBJS
) convert.o \
684 mbchar.o dyn-string.o splay-tree.o graph.o sbitmap.o resource.o hash.o
686 # GEN files are listed separately, so they can be built before doing parallel
687 # makes for cc1 or cc1plus. Otherwise sequent parallel make attempts to load
688 # them before rtl.o is compiled.
689 GEN
= genemit genoutput genrecog genextract genflags gencodes genconfig \
690 genpeep gengenrtl gencheck
694 # Files to be copied away after each stage in building.
695 STAGESTUFF
= *$(objext
) insn-flags.h insn-config.h insn-codes.h \
696 insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
697 insn-attr.h insn-attrtab.c insn-opinit.c tree-check.h \
698 s-flags s-config s-codes s-mlib s-under\
699 s-output s-recog s-emit s-extract s-peep s-check \
700 s-attr s-attrtab s-opinit s-crt s-crtS s-crt0 \
701 genemit
$(build_exeext
) genoutput
$(build_exeext
) genrecog
$(build_exeext
) \
702 genextract
$(build_exeext
) genflags
$(build_exeext
) gencodes
$(build_exeext
) \
703 genconfig
$(build_exeext
) genpeep
$(build_exeext
) genattrtab
$(build_exeext
) \
704 genattr
$(build_exeext
) genopinit
$(build_exeext
) gengenrtl
$(build_exeext
) \
705 gencheck
$(build_exeext
) \
706 xgcc
$(exeext
) xcpp
$(exeext
) cc1
$(exeext
) cpp$(exeext
) $(EXTRA_PASSES
) \
707 $(EXTRA_PARTS
) $(EXTRA_PROGRAMS
) gcc-cross
$(exeext
) \
708 $(CCCP
)$(exeext
) cc1obj
$(exeext
) enquire
$(exeext
) \
709 protoize
$(exeext
) unprotoize
$(exeext
) \
710 specs collect2
$(exeext
) $(USE_COLLECT2
) underscore.c \
712 *.greg
*.lreg
*.combine
*.flow
*.cse
*.jump
*.rtl
*.tree
*.loop \
713 *.dbr
*.jump2
*.sched
*.cse2
*.sched2
*.stack
*.gcse
*.flow2 \
717 # Members of libgcc1.a.
718 LIB1FUNCS
= _mulsi3 _udivsi3 _divsi3 _umodsi3 _modsi3 \
719 _lshrsi3 _ashrsi3 _ashlsi3 \
720 _divdf3 _muldf3 _negdf2 _adddf3 _subdf3 \
721 _fixdfsi _fixsfsi _floatsidf _floatsisf _truncdfsf2 _extendsfdf2 \
722 _addsf3 _negsf2 _subsf3 _mulsf3 _divsf3 \
723 _eqdf2 _nedf2 _gtdf2 _gedf2 _ltdf2 _ledf2 \
724 _eqsf2 _nesf2 _gtsf2 _gesf2 _ltsf2 _lesf2
726 # Library members defined in libgcc2.c.
727 LIB2FUNCS
= _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 \
728 _lshrdi3 _ashldi3 _ashrdi3 _ffsdi2 \
729 _udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf \
730 _fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi \
731 _fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi \
732 _fixtfdi _fixunstfdi _floatditf \
733 __gcc_bcmp _varargs __dummy _eprintf \
734 _bb _shtab _clear_cache _trampoline __main _exit \
739 FPBIT_FUNCS
= _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \
740 _fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \
741 _lt_sf _le_sf _si_to_sf _sf_to_si _negate_sf _make_sf \
744 DPBIT_FUNCS
= _pack_df _unpack_df _addsub_df _mul_df _div_df \
745 _fpcmp_parts_df _compare_df _eq_df _ne_df _gt_df _ge_df \
746 _lt_df _le_df _si_to_df _df_to_si _negate_df _make_df \
749 # The files that "belong" in CONFIG_H are deliberately omitted
750 # because having them there would not be useful in actual practice.
751 # All they would do is cause complete recompilation every time
752 # one of the machine description files is edited.
753 # That may or may not be what one wants to do.
754 # If it is, rm *.o is an easy way to do it.
755 # CONFIG_H = $(host_xm_file) $(tm_file)
757 RTL_BASE_H
= rtl.h rtl.def machmode.h machmode.def
758 RTL_H
= $(RTL_BASE_H
) genrtl.h
759 TREE_H
= tree.h real.h tree.def machmode.h machmode.def tree-check.h
760 BASIC_BLOCK_H
= basic-block.h bitmap.h sbitmap.h
761 DEMANGLE_H
= $(srcdir)/..
/include/demangle.h
763 EXPR_H
= expr.h insn-codes.h
764 REGS_H
= regs.h varray.h machmode.h machmode.def
766 # Language makefile fragments.
768 # The following targets define the interface between us and the languages.
770 # all.build, all.cross, start.encap, rest.encap,
772 # install-normal, install-common, install-info, install-man,
773 # uninstall, distdir,
774 # mostlyclean, clean, distclean, extraclean, maintainer-clean,
775 # stage1, stage2, stage3, stage4
777 # Each language is linked in with a series of hooks (since we can't use `::'
778 # targets). The name of each hooked is "lang.${target_name}" (eg: lang.info).
779 # Configure computes and adds these here.
784 # sed inserts language fragments after the following line.
785 ####language fragments
788 # End of language makefile fragments.
790 # The only suffixes we want for implicit rules are .c and .o, so clear
791 # the list and add them. This speeds up GNU Make, and allows -r to work.
795 Makefile
: $(srcdir)/Makefile.in config.status
$(srcdir)/version.c \
796 $(xmake_file
) $(tmake_file
) $(LANG_MAKEFILES
)
797 $(SHELL
) $(srcdir)/configure.frag
$(srcdir) "$(SUBDIRS)" \
798 "$(xmake_file)" "$(tmake_file)"
799 cp config.status config.run
800 LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.run
803 $(srcdir)/configure
: $(srcdir)/configure.in
804 cd
$(srcdir); autoconf
806 # cstamp-h.in controls rebuilding of config.in.
807 # It is named cstamp-h.in and not stamp-h.in so the mostlyclean rule doesn't
808 # delete it. A stamp file is needed as autoheader won't update the file if
809 # nothing has changed.
810 # It remains in the source directory and is part of the distribution.
811 # This follows what is done in shellutils, fileutils, etc.
812 # "echo timestamp" is used instead of touch to be consistent with other
813 # packages that use autoconf (??? perhaps also to avoid problems with patch?).
814 # ??? Newer versions have a maintainer mode that may be useful here.
815 $(srcdir)/config.in
: $(srcdir)/cstamp-h.in
816 $(srcdir)/cstamp-h.in
: $(srcdir)/configure.in
$(srcdir)/acconfig.h
817 cd
$(srcdir) && autoheader
818 @
rm -f
$(srcdir)/cstamp-h.in
819 echo timestamp
> $(srcdir)/cstamp-h.in
820 auto-host.h
: cstamp-h
; @true
821 cstamp-h
: config.in config.status
822 CONFIG_HEADERS
=auto-host.h
:config.in LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.status
824 # Really, really stupid make features, such as SUN's KEEP_STATE, may force
825 # a target to build even if it is up-to-date. So we must verify that
826 # config.status does not exist before failing.
827 config.status
: configure version.c
828 @if
[ ! -f config.status
] ; then \
829 echo You must configure gcc. Look at the INSTALL file for details.
; \
832 LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.status
--recheck
; \
835 all.internal
: start.encap rest.encap doc
836 # This is what to compile if making a cross-compiler.
837 # Note that we can compile enquire using the cross-compiler just built,
838 # although we can't run it on this machine.
839 all.cross
: native gcc-cross specs stmp-headers
$(STMP_FIXPROTO
) $(LIBGCC
) \
840 $(LIBGCC1_TEST
) $(EXTRA_PARTS
) lang.
all.cross doc
841 # This is what to compile if making gcc with a cross-compiler.
842 all.build
: native xgcc
$(exeext
) xcpp
$(exeext
) $(EXTRA_PARTS
) lang.
all.build
843 # This is what must be made before installing GCC and converting libraries.
844 start.encap
: native xgcc
$(exeext
) xcpp
$(exeext
) specs
$(LIBGCC1
) \
845 xlimits.h lang.start.encap
846 # These can't be made until after GCC can run.
847 rest.encap
: stmp-headers
$(STMP_FIXPROTO
) $(LIBGCC
) $(EXTRA_PARTS
) lang.rest.encap
848 # This is what is made with the host's compiler
849 # whether making a cross compiler or not.
850 native
: config.status auto-host.h
cpp$(exeext
) intl.
all $(LANGUAGES
) \
851 $(EXTRA_PASSES
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
)
853 # Define the names for selecting languages in LANGUAGES.
857 # Tell GNU make these are phony targets.
858 .PHONY
: C c PROTO proto
860 # On the target machine, finish building a cross compiler.
861 # This does the things that can't be done on the host machine.
862 rest.cross
: $(LIBGCC
) specs
864 # Verify that it works to compile and link libgcc1-test.
865 # If it does, then there are sufficient replacements for libgcc1.a.
866 libgcc1-test
: libgcc1-test.o native
$(GCC_PARTS
)
867 @echo
"Testing libgcc1. Ignore linker warning messages."
868 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) libgcc1-test.o
-o libgcc1-test \
869 -nostartfiles
-nostdlib
`$(GCC_FOR_TARGET) --print-libgcc-file-name`
870 libgcc1-test.o
: libgcc1-test.c native xgcc
$(exeext
)
871 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) -c
$(srcdir)/libgcc1-test.c
873 # Recompile all the language-independent object files.
874 # This is used only if the user explicitly asks for it.
875 compilations
: ${OBJS}
877 # Create a list of the language-independent object files so the language
878 # subdirectories needn't mention their names explicitly.
879 stamp-objlist
: $(OBJS
)
880 echo
" $(OBJS)" | sed
-e
's, \([a-z0-9]\), ../\1,g' -e
's/\.o/$(objext)/g' >stamp-objlist
882 # We call this executable `xgcc' rather than `gcc'
883 # to avoid confusion if the current directory is in the path
884 # and CC is `gcc'. It is renamed to `gcc' when it is installed.
885 xgcc
$(exeext
): gcc.o gccspec.o version.o intl.o
prefix.o \
886 version.o
$(LIBDEPS
) $(EXTRA_GCC_OBJS
)
887 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ gcc.o gccspec.o intl.o \
888 prefix.o version.o
$(EXTRA_GCC_OBJS
) $(LIBS
)
890 # We call this executable `xcpp' rather than `cpp'
891 # since the real preprocessor is named `cpp'. It too is renamed
892 # when it is installed.
893 # The only difference from xgcc is that it's linked with cppspec.o
894 # instead of gccspec.o.
895 xcpp
$(exeext
): gcc.o cppspec.o version.o intl.o
prefix.o \
896 version.o
$(LIBDEPS
) $(EXTRA_GCC_OBJS
)
897 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ gcc.o cppspec.o intl.o \
898 prefix.o version.o
$(EXTRA_GCC_OBJS
) $(LIBS
)
900 # Dump a specs file to make -B./ read these specs over installed ones.
902 $(GCC_FOR_TARGET
) -dumpspecs
> tmp-specs
905 # We do want to create an executable named `xgcc', so we can use it to
907 # Also create gcc-cross, so that install-common will install properly.
908 gcc-cross
: xgcc
$(exeext
)
909 cp xgcc
$(exeext
) gcc-cross
$(exeext
)
911 cc1
$(exeext
): $(P
) $(OBJS
) $(C_OBJS
) $(LIBDEPS
)
912 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(OBJS
) $(C_OBJS
) $(LIBS
)
914 # Build the version of limits.h that we will install.
915 xlimits.h
: glimits.h limitx.h limity.h
916 if
$(LIMITS_H_TEST
) ; then \
917 cat
$(srcdir)/limitx.h
$(srcdir)/glimits.h
$(srcdir)/limity.h
> tmp-xlimits.h
; \
919 cat
$(srcdir)/glimits.h
> tmp-xlimits.h
; \
921 mv tmp-xlimits.h xlimits.h
924 # This is done in two parts because some functions, in libgcc1.c,
925 # must be compiled with something other than GCC,
926 # while the rest, in libgcc2.c, must be compiled with xgcc.
927 # That means we can't do libgcc2.c until after xgcc, cc1, etc.
929 # Use this as value of LIBGCC1 to cause conversion to GNU library format.
930 # LIBCONVERT should put its output in libgcc1.conv.
931 libgcc1.conv
: libgcc1.a
932 $(LIBCONVERT
) libgcc1.a libgcc1.conv
934 # Use this as value of LIBGCC1 to inhibit use of libgcc1.c entirely.
935 # Make an empty file instead.
936 libgcc1.null
: $(GCC_PASSES
)
937 echo
"void __foo () {}" > dummy.c
938 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) -c dummy.c
939 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) libgcc1.null dummy
$(objext
)
940 rm -f dummy
$(objext
) dummy.c
942 # This is $(LIBGCC1) for a cross-compiler.
943 # We have no automatic way of building libgcc1.a,
944 # so it's up to the installer to find a way to do that.
945 # This rule deliberately does not depend on libgcc1.a
946 # so that it will fail if the installer hasn't provided it.
948 mv libgcc1.a libgcc1.cross ||
(echo You must find a way to make libgcc1.a
; false
)
950 # Compile the library of arithmetic subroutines with the native compiler.
951 # Don't compile it with GCC!
952 # (That would cause most arithmetic functions to call themselves.)
954 # NOTE: If you modify these rules substantially, please be sure to
955 # check at least config/i386/t-sco5 and possibly other makefile
957 libgcc1.a
: libgcc1.c
$(CONFIG_H
) $(LIB1FUNCS_EXTRA
) config.status
959 # Actually build it in tmplibgcc1.a, then rename at end,
960 # so that libgcc1.a itself remains nonexistent if compilation is aborted.
961 # -e causes any failing command to make this rule fail.
962 # -e doesn't work in certain shells, so we test $$? as well.
963 # lynx has a broken ar, it always complains when the initial library is
964 # empty, thus this command works only if we don't do -e
965 # There is a trailing backslash (\) deleted from the following line.
967 for name in
$(LIB1FUNCS
); \
970 rm -f
$${name}$(objext
); \
971 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -c
-DL
$${name} $(srcdir)/libgcc1.c
; \
972 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
973 mv libgcc1
$(objext
) $${name}$(objext
); \
974 $(OLDAR
) $(OLDAR_FLAGS
) tmplibgcc1.a
$${name}$(objext
); \
975 rm -f
$${name}$(objext
); \
977 # Some shells crash when a loop has no items.
978 # So make sure there is always at least one--`..'.
980 # We don't use -e here because there are if statements
981 # that should not make the command give up when the if condition is false.
982 # Instead, we test for failure after each command where it matters.
983 for file in ..
$(LIB1FUNCS_EXTRA
); \
985 if
[ x
$${file} != x..
]; then \
986 name
=`echo $${file} | sed -e 's/[.][cS]$$//' -e 's/[.]asm$$//'`; \
988 if
[ $${name}.asm
= $${file} ]; then \
989 cp
$${file} $${name}.s || exit
1; file
=$${name}.s
; \
991 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -c
$${file}; \
992 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
993 $(OLDAR
) $(OLDAR_FLAGS
) tmplibgcc1.a
$${name}$(objext
); \
994 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
995 rm -f
$${name}.s
$${name}$(objext
); \
999 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
1000 $(RANLIB_FOR_TARGET
) tmplibgcc1.a
; \
1002 mv tmplibgcc1.a libgcc1.a
1004 # Build libgcc1.a from assembler source. LIB1ASMFUNCS is the list of
1005 # functions. LIB1ASMSRC is the name of the source file in the config
1007 libgcc1-asm.a
: libgcc2.ready config.status
$(srcdir)/config
/$(LIB1ASMSRC
)
1008 -rm -f tmplibgcc1.a libgcc1.S
1009 cp
$(srcdir)/config
/$(LIB1ASMSRC
) libgcc1.S
1010 # Actually build it in tmplibgcc1.a, then rename at end,
1011 # so that libgcc1-asm.a itself remains nonexistent if compilation is aborted.
1012 # -e causes any failing command to make this rule fail.
1013 # -e doesn't work in certain shells, so we test $$? as well.
1014 # lynx has a broken ar, it always complains when the initial library is
1015 # empty, thus this command works only if we don't do -e
1016 # There is a trailing backslash (\) deleted from the following line.
1018 for name in
$(LIB1ASMFUNCS
); \
1021 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} libgcc1.S
; \
1022 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1023 mv libgcc1
$(objext
) $${name}$(objext
); \
1024 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc1.a
$${name}$(objext
); \
1025 rm -f
$${name}$(objext
); \
1028 mv tmplibgcc1.a libgcc1-asm.a
1030 # Generate assembly versions of the functions required for libgcc1.
1031 # You'll still need to massage the code by hand (possibly hacking
1032 # underscores and local labels) but this will get you started.
1033 libgcc1.S
: libgcc1.c
$(CONFIG_H
) config.status
1036 for name in
$(LIB1FUNCS
); \
1039 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -S
-DL
$${name} $(srcdir)/libgcc1.c
; \
1040 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1041 echo
'#ifdef ' L
$${name} >> libgcc1.S
; \
1042 cat libgcc1.s
>> libgcc1.S
; \
1043 echo
'#endif /*' L
$${name} '*/' >> libgcc1.S
; \
1044 echo
"" >> libgcc1.S
; \
1047 # Compiling libgcc2.a requires making sure that cc1, etc. have been compiled.
1048 # But recompiling cc1 should not force recompilation of libgcc2.a.
1049 # If you want to force recompilation, delete libgcc2.a.
1050 libgcc2.ready
: $(GCC_PASSES
) $(LIBGCC2_DEPS
) stmp-int-hdrs
$(STMP_FIXPROTO
)
1051 -if
[ -f libgcc2.ready
] ; then \
1054 touch libgcc2.ready
; \
1057 LIB2ADD
= $(srcdir)/frame.c
$(LIB2FUNCS_EXTRA
) $(LANG_LIB2FUNCS
)
1058 libgcc2.a
: libgcc2.c libgcc2.ready
$(CONFIG_H
) $(FPBIT
) $(DPBIT
) $(LIB2ADD
) \
1059 machmode.h longlong.h frame.h gbl-ctors.h config.status
1060 # Actually build it in tmplibgcc2.a, then rename at end,
1061 # so that libgcc2.a itself remains nonexistent if compilation is aborted.
1063 # -e causes any failing command to make this rule fail.
1064 # -e doesn't work in certain shells, so we test $$? as well.
1065 # lynx has a broken ar, it always complains when the initial library is
1066 # empty, thus this command works only if we don't do -e
1067 # There is a trailing backslash (\) deleted from the following line.
1069 for name in
$(LIB2FUNCS
); \
1072 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1073 $(MAYBE_USE_COLLECT2
) $(srcdir)/libgcc2.c
-o
$${name}$(objext
); \
1074 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1075 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1076 rm -f
$${name}$(objext
); \
1078 for name in
$(LIB2FUNCS_EH
); \
1081 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) -fexceptions
$(INCLUDES
) -c \
1082 -DL
$${name} $(srcdir)/libgcc2.c
-o
$${name}$(objext
); \
1083 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1084 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1085 rm -f
$${name}$(objext
); \
1087 if
[ x
$(FPBIT
) != x
]; then \
1088 for name in
$(FPBIT_FUNCS
); \
1091 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1092 -DFINE_GRAINED_LIBRARIES
$(FPBIT
) -o
$${name}$(objext
); \
1093 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1094 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1095 rm -f
$${name}$(objext
); \
1098 if
[ x
$(DPBIT
) != x
]; then \
1099 for name in
$(DPBIT_FUNCS
); \
1102 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1103 -DFINE_GRAINED_LIBRARIES
$(DPBIT
) -o
$${name}$(objext
); \
1104 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1105 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1106 rm -f
$${name}$(objext
); \
1109 # Some shells crash when a loop has no items.
1110 # So make sure there is always at least one--`..'.
1112 # We don't use -e here because there are if statements
1113 # that should not make the command give up when the if condition is false.
1114 # Instead, we test for failure after each command where it matters.
1115 for file in
$(LIB2ADD
); do \
1116 name
=`echo $${file} | sed -e 's/[.][cSo]$$//' -e 's/[.]asm$$//' -e 's/[.]txt$$//'`; \
1117 oname
=` echo $${name} | sed -e 's,.*/,,'`; \
1118 if
[ $${name}.txt
= $${file} ]; then \
1119 for f in ..
`cat $${file}`; do if
[ x
$${f} != x..
]; then \
1120 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1121 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1122 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" CC
="$(CC)" \
1123 CFLAGS
="$(CFLAGS)" HOST_PREFIX
="$(HOST_PREFIX)" \
1124 HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1125 LANGUAGES
="$(LANGUAGES)" \
1126 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $${f}; \
1127 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1128 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${f}; \
1134 if
[ $${name}.asm
= $${file} ]; then \
1135 cp
$${file} $${name}.s || exit
1; file
=$${name}.s
; \
1137 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
$${file}; \
1138 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1139 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${oname}$(objext
); \
1140 rm -f
$${name}.s
$${oname}$(objext
); \
1143 mv tmplibgcc2.a libgcc2.a
1144 # These lines were deleted from above the mv command
1145 # because ranlibing libgcc.a itself should suffice.
1146 # -if [ x${HPUX_GAS} = x ] ; then \
1147 # if $(RANLIB_TEST_FOR_TARGET) ; then \
1148 # $(RANLIB_FOR_TARGET) tmplibgcc2.a;
1152 # Combine the various libraries into a single library, libgcc.a.
1153 libgcc.a
: $(LIBGCC1
) $(LIBGCC2
)
1154 -rm -rf tmplibgcc.a libgcc.a tmpcopy
1156 -if
[ x
$(LIBGCC1
) != x
]; \
1157 then
(cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC1
)); \
1160 # Some versions of ar (specifically the one in RISC/os 5.x), create an
1161 # unwritable table of contents file, and then print an error message when
1162 # the second ar command tries to overwrite this file. To avoid the error
1163 # message from ar, we make sure all files are writable.
1164 -(cd tmpcopy
; chmod
+w
* > /dev
/null
2>&1)
1165 (cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC2
))
1166 (cd tmpcopy
; $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) ..
/tmplibgcc.a
*$(objext
))
1168 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
1169 $(RANLIB_FOR_TARGET
) tmplibgcc.a
; \
1171 # Actually build it in tmplibgcc.a, then rename at end,
1172 # so that libgcc.a itself remains nonexistent if compilation is aborted.
1173 mv tmplibgcc.a libgcc.a
1175 # Use the genmultilib shell script to generate the information the gcc
1176 # driver program needs to select the library directory based on the
1178 multilib.h
: s-mlib
; @true
1179 s-mlib
: $(srcdir)/genmultilib Makefile
1180 $(SHELL
) $(srcdir)/genmultilib \
1181 "$(MULTILIB_OPTIONS)" \
1182 "$(MULTILIB_DIRNAMES)" \
1183 "$(MULTILIB_MATCHES)" \
1184 "$(MULTILIB_EXCEPTIONS)" \
1185 "$(MULTILIB_EXTRA_OPTS)" > tmp-mlib.h
1186 $(srcdir)/move-if-change tmp-mlib.h multilib.h
1189 # Build multiple copies of libgcc.a, one for each target switch.
1190 stmp-multilib
: $(LIBGCC1
) libgcc2.c libgcc2.ready
$(CONFIG_H
) \
1192 $(LIB2ADD
) machmode.h longlong.h gbl-ctors.h config.status
1193 for i in
`$(GCC_FOR_TARGET) --print-multi-lib`; do \
1194 dir=`echo $$i | sed -e 's/;.*$$//'`; \
1195 flags
=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
1196 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1197 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1198 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1199 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1200 RANLIB_FOR_TARGET
="$(RANLIB_FOR_TARGET)" \
1201 RANLIB_TEST_FOR_TARGET
="$(RANLIB_TEST_FOR_TARGET)" \
1202 LANGUAGES
="$(LANGUAGES)" \
1203 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1204 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS) $${flags}" \
1205 MULTILIB_CFLAGS
="$${flags}" \
1206 LIBGCC1
="$(LIBGCC1)" LIBGCC2
="$(LIBGCC2)" \
1207 dir="$${dir}" stmp-multilib-sub
; \
1208 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1212 # Subroutine of stmp-multilib so make -n works.
1215 if
[ -d
$(dir) ]; then \
1217 rm -f libgcc.a
$(EXTRA_MULTILIB_PARTS
); \
1220 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1221 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1222 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1223 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1224 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1225 LANGUAGES
="$(LANGUAGES)" \
1226 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $(LIBGCC2
)
1227 if
[ x
$(LIBGCC1
) != xlibgcc1-asm.a
]; \
1229 else rm -f
$(LIBGCC1
); \
1231 if
[ x
$(LIBGCC1
) != xlibgcc1-asm.a
]; \
1234 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1235 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1236 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1237 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1238 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1239 LANGUAGES
="$(LANGUAGES)" \
1240 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $(LIBGCC1
); \
1242 rm -rf tmplibgcc.a tmpcopy
1244 if
[ x
$(LIBGCC1
) != x
]; \
1245 then
(cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC1
)); \
1248 (cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC2
))
1249 (cd tmpcopy
; $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) ..
/tmplibgcc.a
*$(objext
))
1250 rm -rf libgcc2.a tmpcopy
1251 if
$(RANLIB_TEST_FOR_TARGET
) ; then \
1252 $(RANLIB_FOR_TARGET
) tmplibgcc.a
; \
1254 if
[ -d
$(dir) ]; then true
; else mkdir
$(dir); fi
1255 mv tmplibgcc.a
$(dir)/libgcc.a
1256 for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
1257 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1258 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1259 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1260 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1261 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1262 LANGUAGES
="$(LANGUAGES)" \
1263 MULTILIB_CFLAGS
="$(MULTILIB_CFLAGS)" T
="t" t
$${f}; \
1264 mv t
$${f} $(dir)/$${f}; \
1268 # Compile two additional files that are linked with every program
1269 # linked using GCC on systems using COFF or ELF, for the sake of C++
1271 $(T
)crtbegin.o
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1272 defaults.h frame.h gbl-ctors.h
1273 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(MULTILIB_CFLAGS
) -g0 \
1274 -finhibit-size-directive
-fno-inline-functions
-fno-exceptions
$(CRTSTUFF_T_CFLAGS
) \
1275 -c
$(srcdir)/crtstuff.c
-DCRT_BEGIN
-o
$(T
)crtbegin
$(objext
)
1277 $(T
)crtend.o
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1278 defaults.h frame.h gbl-ctors.h
1279 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(MULTILIB_CFLAGS
) -g0 \
1280 -finhibit-size-directive
-fno-inline-functions
-fno-exceptions
$(CRTSTUFF_T_CFLAGS
) \
1281 -c
$(srcdir)/crtstuff.c
-DCRT_END
-o
$(T
)crtend
$(objext
)
1283 # On some systems we also want to install versions of these files
1284 # compiled using PIC for use in shared libraries.
1285 crtbeginS.o crtendS.o
: s-crtS
; @true
1287 s-crtS
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1288 defaults.h frame.h gbl-ctors.h
1289 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(CRTSTUFF_T_CFLAGS_S
) \
1290 -DCRT_BEGIN
-DCRTSTUFFS_O
-finhibit-size-directive
-fno-inline-functions \
1291 -fno-exceptions
-g0
-c
$(srcdir)/crtstuff.c
1292 mv crtstuff
$(objext
) crtbeginS
$(objext
)
1293 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(CRTSTUFF_T_CFLAGS_S
) \
1294 -DCRT_END
-DCRTSTUFFS_O
-finhibit-size-directive
-fno-inline-functions \
1295 -fno-exceptions
-g0
-c
$(srcdir)/crtstuff.c
-o crtendS
$(objext
)
1298 # Compile the start modules crt0.o and mcrt0.o that are linked with every program
1299 crt0.o
: s-crt0
; @true
1300 mcrt0.o
: s-crt0
; @true
1302 s-crt0
: $(CRT0_S
) $(MCRT0_S
) $(GCC_PASSES
) $(CONFIG_H
)
1303 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(CRT0STUFF_T_CFLAGS
) \
1304 -o crt0.o
-c
$(CRT0_S
)
1305 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(CRT0STUFF_T_CFLAGS
) \
1306 -o mcrt0.o
-c
$(MCRT0_S
)
1309 # Compiling object files from source files.
1311 # Note that dependencies on obstack.h are not written
1312 # because that file is not part of GCC.
1314 # C language specific files.
1316 c-parse.o
: $(srcdir)/c-parse.c
$(CONFIG_H
) $(TREE_H
) c-lex.h \
1317 $(srcdir)/c-parse.h c-tree.h input.h flags.h system.h toplev.h
1318 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c
$(srcdir)/c-parse.c
1319 $(srcdir)/c-parse.h
: $(srcdir)/c-parse.c
1320 $(srcdir)/c-parse.c
: $(srcdir)/c-parse.y
1321 cd
$(srcdir); $(BISON
) $(BISONFLAGS
) -d
-o c-parse.c c-parse.y
1322 $(srcdir)/c-parse.y
: c-parse.in
1323 echo
'/*WARNING: This file is automatically generated!*/' >tmp-c-parse.y
1324 sed
-e
"/^ifobjc$$/,/^end ifobjc$$/d" \
1325 -e
"/^ifc$$/d" -e
"/^end ifc$$/d" \
1326 $(srcdir)/c-parse.in
>>tmp-c-parse.y
1327 $(srcdir)/move-if-change tmp-c-parse.y
$(srcdir)/c-parse.y
1329 $(srcdir)/c-gperf.h
: c-parse.gperf
1330 gperf
-L C
-F
', 0, 0' -p
-j1
-i
1 -g
-o
-t
-G
-N is_reserved_word \
1331 -k1
,3,$$ $(srcdir)/c-parse.gperf
>tmp-gperf.h
1332 $(srcdir)/move-if-change tmp-gperf.h
$(srcdir)/c-gperf.h
1334 c-decl.o
: c-decl.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-lex.h flags.h \
1336 c-typeck.o
: c-typeck.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h flags.h \
1337 intl.h output.h
$(EXPR_H
) $(RTL_H
) toplev.h
1338 c-lang.o
: c-lang.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-lex.h toplev.h \
1340 c-lex.o
: c-lex.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) c-lex.h c-tree.h \
1341 $(srcdir)/c-parse.h input.h intl.h flags.h
$(srcdir)/c-gperf.h c-pragma.h \
1342 toplev.h output.h mbchar.h
1343 c-aux-info.o
: c-aux-info.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h flags.h \
1345 c-convert.o
: c-convert.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h toplev.h
1346 c-pragma.o
: c-pragma.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) except.h \
1347 function.h defaults.h c-pragma.h toplev.h
1348 c-iterate.o
: c-iterate.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) c-tree.h \
1349 flags.h toplev.h
$(EXPR_H
)
1350 mbchar.o
: mbchar.c
$(CONFIG_H
) system.h mbchar.h
1351 graph.o
: graph.c
$(CONFIG_H
) system.h toplev.h flags.h output.h
$(RTL_H
) \
1352 hard-reg-set.h
$(BASIC_BLOCK_H
)
1353 sbitmap.o
: sbitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h
$(BASIC_BLOCK_H
)
1355 COLLECT2_OBJS
= collect2.o tlink.o hash.o intl.o underscore.o version.o
1356 collect2
$(exeext
): $(COLLECT2_OBJS
) $(LIBDEPS
)
1357 # Don't try modifying collect2 (aka ld) in place--it might be linking this.
1358 -rm -f collect2
$(exeext
)
1359 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(COLLECT2_OBJS
) $(LIBS
)
1361 collect2.o
: collect2.c
$(CONFIG_H
) system.h gstab.h intl.h \
1362 $(srcdir)/..
/include/obstack.h
$(DEMANGLE_H
) collect2.h
1363 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1364 -DTARGET_MACHINE
=\"$(target_alias
)\" $(MAYBE_USE_COLLECT2
) \
1365 -c
`echo $(srcdir)/collect2.c | sed 's,^\./,,'`
1367 tlink.o
: tlink.c
$(DEMANGLE_H
) hash.h
$(CONFIG_H
) system.h toplev.h collect2.h
1368 hash.o
: hash.c hash.h system.h toplev.h
1370 vfprintf.o
: $(srcdir)/..
/libiberty
/vfprintf.c
$(CONFIG_H
) system.h
1372 $(LN_S
) $(srcdir)/..
/libiberty
/vfprintf.c vfprintf.c
1373 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) vfprintf.c
1375 splay-tree.o
: $(srcdir)/..
/libiberty
/splay-tree.c \
1376 $(srcdir)/..
/include/splay-tree.h
$(srcdir)/..
/include/libiberty.h
1378 $(LN_S
) $(srcdir)/..
/libiberty
/splay-tree.c splay-tree.c
1379 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) splay-tree.c
1381 underscore.c
: s-under
; @true
1383 s-under
: $(GCC_PASSES
)
1384 echo
"int xxy_us_dummy;" >tmp-dum.c
1385 $(GCC_FOR_TARGET
) -S tmp-dum.c
1386 echo
'/*WARNING: This file is automatically generated!*/' >tmp-under.c
1387 if grep _xxy_us_dummy tmp-dum.s
> /dev
/null
; then \
1388 echo
"int prepends_underscore = 1;" >>tmp-under.c
; \
1390 echo
"int prepends_underscore = 0;" >>tmp-under.c
; \
1392 $(srcdir)/move-if-change tmp-under.c underscore.c
1393 -rm -f tmp-dum.c tmp-dum.s
1396 # A file used by all variants of C.
1398 c-common.o
: c-common.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-lex.h \
1399 flags.h toplev.h output.h c-pragma.h
$(RTL_H
)
1401 # Language-independent files.
1404 -DSTANDARD_STARTFILE_PREFIX
=\"$(libdir)/\" \
1405 -DSTANDARD_EXEC_PREFIX
=\"$(libdir)/gcc-lib
/\" \
1406 -DDEFAULT_TARGET_VERSION
=\"$(version
)\" \
1407 -DDEFAULT_TARGET_MACHINE
=\"$(target_alias
)\" \
1408 -DTOOLDIR_BASE_PREFIX
=\"$(exec_prefix)/\"
1409 gcc.o
: gcc.c
$(CONFIG_H
) system.h intl.h multilib.h \
1410 Makefile
$(lang_specs_files
) prefix.h
1411 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1413 -c
`echo $(srcdir)/gcc.c | sed 's,^\./,,'`
1415 gccspec.o
: gccspec.c
$(CONFIG_H
) system.h
1416 cppspec.o
: cppspec.c
$(CONFIG_H
) system.h
1418 tree-check.h
: s-check
; @true
1419 s-check
: gencheck
$(srcdir)/move-if-change
1420 .
/gencheck
> tmp-check.h
1421 $(srcdir)/move-if-change tmp-check.h tree-check.h
1424 gencheck
: gencheck.o
$(lang_tree_files
) $(HOST_LIBDEPS
)
1425 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1426 gencheck.o
$(HOST_LIBS
)
1428 gencheck.o
: gencheck.c tree.def
$(CONFIG_H
) hconfig.h system.h
1429 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) \
1430 $(srcdir)/gencheck.c
1432 dumpvers
: dumpvers.c
1434 version.o
: version.c
1435 obstack.o
: $(srcdir)/..
/libiberty
/obstack.c
$(CONFIG_H
)
1437 $(LN_S
) $(srcdir)/..
/libiberty
/obstack.c obstack.c
1438 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) obstack.c
1440 prefix.o
: prefix.c
$(CONFIG_H
) system.h Makefile
prefix.h
1441 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1442 -DPREFIX
=\"$(prefix)\" \
1443 -c
`echo $(srcdir)/prefix.c | sed 's,^\./,,'`
1445 convert.o
: convert.c
$(CONFIG_H
) $(TREE_H
) flags.h convert.h toplev.h
1447 tree.o
: tree.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h function.h toplev.h except.h
1448 print-tree.o
: print-tree.c
$(CONFIG_H
) system.h
$(TREE_H
)
1449 stor-layout.o
: stor-layout.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h \
1450 function.h
$(EXPR_H
) $(RTL_H
) toplev.h except.h
1451 fold-const.o
: fold-const.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h toplev.h \
1453 toplev.o
: toplev.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) \
1454 flags.h input.h insn-attr.h xcoffout.h defaults.h output.h \
1455 insn-codes.h insn-config.h intl.h
$(RECOG_H
) Makefile toplev.h dwarfout.h \
1456 dwarf2out.h sdbout.h dbxout.h
$(EXPR_H
) $(BASIC_BLOCK_H
) \
1457 $(lang_options_files
)
1458 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(MAYBE_USE_COLLECT2
) \
1459 -DTARGET_NAME
=\"$(target_alias
)\" \
1460 -c
`echo $(srcdir)/toplev.c | sed 's,^\./,,'`
1462 rtl.o
: rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h
1464 print-rtl.o
: print-rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h basic-block.h
1465 rtlanal.o
: rtlanal.c
$(CONFIG_H
) system.h
$(RTL_H
)
1467 varasm.o
: varasm.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h \
1468 function.h defaults.h
$(EXPR_H
) hard-reg-set.h
$(REGS_H
) \
1469 xcoffout.h output.h c-pragma.h toplev.h except.h dbxout.h sdbout.h
1470 function.o
: function.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1471 function.h insn-flags.h insn-codes.h
$(EXPR_H
) $(REGS_H
) hard-reg-set.h \
1472 insn-config.h
$(RECOG_H
) output.h toplev.h except.h hash.h
1473 stmt.o
: stmt.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h function.h \
1474 insn-flags.h insn-config.h insn-codes.h hard-reg-set.h
$(EXPR_H
) except.h \
1475 loop.h
$(RECOG_H
) toplev.h output.h varray.h
1476 except.o
: except.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1477 function.h insn-flags.h
$(EXPR_H
) $(REGS_H
) hard-reg-set.h \
1478 insn-config.h
$(RECOG_H
) output.h except.h toplev.h intl.h
1479 expr.o
: expr.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h function.h \
1480 $(REGS_H
) insn-flags.h insn-codes.h
$(EXPR_H
) insn-config.h
$(RECOG_H
) \
1481 output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h except.h
1482 calls.o
: calls.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h
$(EXPR_H
) \
1483 insn-flags.h
$(REGS_H
) toplev.h output.h
1484 expmed.o
: expmed.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1485 insn-flags.h insn-config.h insn-codes.h
$(EXPR_H
) $(RECOG_H
) real.h toplev.h
1486 explow.o
: explow.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1487 hard-reg-set.h insn-config.h
$(EXPR_H
) $(RECOG_H
) insn-flags.h \
1488 insn-codes.h toplev.h
1489 optabs.o
: optabs.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1490 insn-flags.h insn-config.h insn-codes.h
$(EXPR_H
) $(RECOG_H
) reload.h \
1492 dbxout.o
: dbxout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h
$(REGS_H
) \
1493 insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h dbxout.h \
1495 sdbout.o
: sdbout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h except.h \
1496 function.h
$(EXPR_H
) output.h hard-reg-set.h
$(REGS_H
) defaults.h real.h \
1497 insn-config.h
$(srcdir)/..
/include/obstack.h xcoffout.h c-pragma.h \
1499 dwarfout.o
: dwarfout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) dwarf.h \
1500 flags.h insn-config.h reload.h output.h defaults.h toplev.h dwarfout.h
1501 dwarf2out.o
: dwarf2out.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) dwarf2.h \
1502 flags.h insn-config.h reload.h output.h defaults.h \
1503 hard-reg-set.h
$(REGS_H
) $(EXPR_H
) toplev.h dwarf2out.h dyn-string.h
1504 xcoffout.o
: xcoffout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) xcoffout.h \
1505 flags.h toplev.h output.h dbxout.h
1506 emit-rtl.o
: emit-rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1507 except.h function.h
$(REGS_H
) insn-config.h
$(RECOG_H
) real.h \
1508 $(EXPR_H
) $(srcdir)/..
/include/obstack.h hard-reg-set.h bitmap.h toplev.h
1509 real.o
: real.c
$(CONFIG_H
) system.h
$(TREE_H
) toplev.h
1510 getpwd.o
: getpwd.c
$(CONFIG_H
) system.h
1512 integrate.o
: integrate.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1513 integrate.h insn-flags.h insn-config.h
$(EXPR_H
) real.h
$(REGS_H
) \
1514 intl.h function.h output.h
$(RECOG_H
) except.h toplev.h
1516 jump.o
: jump.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h hard-reg-set.h
$(REGS_H
) \
1517 insn-config.h insn-flags.h
$(RECOG_H
) $(EXPR_H
) real.h except.h \
1518 toplev.h insn-attr.h
1519 stupid.o
: stupid.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h \
1520 $(BASIC_BLOCK_H
) insn-config.h reload.h flags.h toplev.h
1522 cse.o
: cse.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h flags.h \
1523 real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) toplev.h output.h \
1524 $(srcdir)/..
/include/splay-tree.h
1525 gcse.o
: gcse.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h \
1526 flags.h real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) $(BASIC_BLOCK_H
) \
1528 resource.o
: resource.c
$(CONFIG_H
) $(RTL_H
) hard-reg-set.h system.h \
1529 $(BASIC_BLOCK_H
) $(REGS_H
) flags.h output.h resource.h toplev.h
1530 lcm.o
: lcm.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h flags.h \
1531 real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) $(BASIC_BLOCK_H
)
1532 profile.o
: profile.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h insn-flags.h \
1533 gcov-io.h
$(TREE_H
) output.h
$(REGS_H
) toplev.h insn-config.h
1534 loop.o
: loop.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h loop.h insn-config.h \
1535 insn-flags.h
$(REGS_H
) hard-reg-set.h
$(RECOG_H
) $(EXPR_H
) real.h \
1537 unroll.o
: unroll.c
$(CONFIG_H
) system.h
$(RTL_H
) insn-config.h \
1538 integrate.h
$(REGS_H
) $(RECOG_H
) flags.h
$(EXPR_H
) loop.h toplev.h varray.h
1539 flow.o
: flow.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h insn-config.h \
1540 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h output.h toplev.h recog.h \
1542 combine.o
: combine.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1543 insn-config.h insn-flags.h insn-codes.h insn-attr.h
$(REGS_H
) $(EXPR_H
) \
1544 $(BASIC_BLOCK_H
) $(RECOG_H
) real.h hard-reg-set.h toplev.h
1545 regclass.o
: regclass.c
$(CONFIG_H
) system.h
$(RTL_H
) hard-reg-set.h flags.h \
1546 $(BASIC_BLOCK_H
) $(REGS_H
) insn-config.h
$(RECOG_H
) reload.h real.h toplev.h \
1548 local-alloc.o
: local-alloc.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1549 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h insn-config.h
$(RECOG_H
) output.h \
1550 insn-attr.h toplev.h
1551 bitmap.o
: bitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h
$(BASIC_BLOCK_H
) \
1553 global.o
: global.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h reload.h \
1554 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h insn-config.h output.h toplev.h
1555 varray.o
: varray.c
$(CONFIG_H
) system.h varray.h
$(RTL_H
) $(TREE_H
) bitmap.h
1557 reload.o
: reload.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h output.h
$(EXPR_H
) \
1558 reload.h
$(RECOG_H
) hard-reg-set.h insn-config.h insn-codes.h
$(REGS_H
) \
1560 reload1.o
: reload1.c
$(CONFIG_H
) system.h
$(RTL_H
) real.h flags.h
$(EXPR_H
) \
1561 reload.h
$(REGS_H
) hard-reg-set.h insn-config.h insn-flags.h insn-codes.h \
1562 $(BASIC_BLOCK_H
) $(RECOG_H
) output.h toplev.h
1563 caller-save.o
: caller-save.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1564 $(REGS_H
) hard-reg-set.h insn-config.h
$(BASIC_BLOCK_H
) \
1565 $(RECOG_H
) reload.h
$(EXPR_H
) toplev.h
1566 reorg.o
: reorg.c
$(CONFIG_H
) system.h
$(RTL_H
) conditions.h hard-reg-set.h \
1567 $(BASIC_BLOCK_H
) $(REGS_H
) insn-config.h insn-attr.h insn-flags.h \
1568 $(RECOG_H
) flags.h output.h
$(EXPR_H
) toplev.h
1569 alias.o
: alias.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h hard-reg-set.h \
1570 $(REGS_H
) toplev.h output.h
$(EXPR_H
)
1571 regmove.o
: regmove.c
$(CONFIG_H
) system.h
$(RTL_H
) insn-config.h \
1572 $(RECOG_H
) output.h reload.h
$(REGS_H
) hard-reg-set.h flags.h \
1573 $(EXPR_H
) insn-flags.h
$(BASIC_BLOCK_H
) toplev.h
1574 $(SCHED_PREFIX
)sched.o
: $(SCHED_PREFIX
)sched.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1575 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h flags.h insn-config.h \
1576 insn-attr.h toplev.h recog.h
1577 final.o
: final.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h intl.h \
1578 $(REGS_H
) $(RECOG_H
) conditions.h insn-config.h insn-attr.h except.h real.h \
1579 output.h hard-reg-set.h insn-flags.h insn-codes.h gstab.h xcoffout.h \
1580 defaults.h toplev.h reload.h dwarfout.h dwarf2out.h sdbout.h dbxout.h
1581 recog.o
: recog.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1582 $(REGS_H
) $(RECOG_H
) hard-reg-set.h flags.h insn-config.h insn-attr.h \
1583 insn-flags.h insn-codes.h real.h toplev.h
1584 reg-stack.o
: reg-stack.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) recog.h \
1585 $(REGS_H
) hard-reg-set.h flags.h insn-config.h insn-flags.h toplev.h
1586 dyn-string.o
: dyn-string.c dyn-string.h
$(CONFIG_H
) system.h
1588 $(out_object_file
): $(out_file
) $(CONFIG_H
) $(TREE_H
) \
1589 $(RTL_H
) $(REGS_H
) hard-reg-set.h real.h insn-config.h conditions.h \
1590 insn-flags.h output.h insn-attr.h insn-codes.h system.h toplev.h
1591 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(out_file
)
1593 # Build auxiliary files that support ecoff format.
1594 mips-tfile
: mips-tfile.o version.o
$(LIBDEPS
)
1595 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ mips-tfile.o version.o
$(LIBS
)
1597 mips-tfile.o
: mips-tfile.c
$(CONFIG_H
) $(RTL_H
) system.h machmode.h
1599 mips-tdump
: mips-tdump.o version.o
$(LIBDEPS
)
1600 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ mips-tdump.o version.o
$(LIBS
)
1602 mips-tdump.o
: mips-tdump.c
$(CONFIG_H
) $(RTL_H
) system.h
1604 # Build file to support OSF/rose half-pic format.
1605 halfpic.o
: halfpic.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) system.h
1607 # Normally this target is not used; but it is used if you
1608 # define ALLOCA=alloca.o. In that case, you must get a suitable alloca.c
1609 # from the GNU Emacs distribution.
1610 alloca.o
: $(srcdir)/..
/libiberty
/alloca.c
1612 $(LN_S
) $(srcdir)/..
/libiberty
/alloca.c alloca.c
1613 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(ALLOCA_FLAGS
) \
1614 -c
`echo alloca.c | sed 's,^\./,,'`
1617 # Generate header and source files from the machine description,
1620 .PRECIOUS
: insn-config.h insn-flags.h insn-codes.h \
1621 insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c \
1622 insn-attr.h insn-attrtab.c
1624 # The following pair of rules has this effect:
1625 # genconfig is run only if the md has changed since genconfig was last run;
1626 # but the file insn-config.h is touched only when its contents actually change.
1628 # Each of the other insn-* files is handled by a similar pair of rules.
1630 # This causes an anomaly in the results of make -n
1631 # because insn-* is older than s-*
1632 # and thus make -n thinks that insn-* will be updated
1633 # and force recompilation of things that depend on it.
1634 # We use move-if-change precisely to avoid such recompilation.
1635 # But there is no way to teach make -n that it will be avoided.
1637 # Each of the insn-*.[ch] rules has a semicolon at the end,
1638 # for otherwise the system Make on SunOS 4.1 never tries
1639 # to recompile insn-*.o. To avoid problems and extra noise from
1640 # versions of make which don't like empty commands (nothing after the
1641 # trailing `;'), we call true for each.
1643 insn-config.h
: s-config
; @true
1644 s-config
: $(md_file
) genconfig
$(srcdir)/move-if-change
1645 .
/genconfig
$(md_file
) > tmp-config.h
1646 $(srcdir)/move-if-change tmp-config.h insn-config.h
1649 insn-flags.h
: s-flags
; @true
1650 s-flags
: $(md_file
) genflags
$(srcdir)/move-if-change
1651 .
/genflags
$(md_file
) > tmp-flags.h
1652 $(srcdir)/move-if-change tmp-flags.h insn-flags.h
1655 insn-codes.h
: s-codes
; @true
1656 s-codes
: $(md_file
) gencodes
$(srcdir)/move-if-change
1657 .
/gencodes
$(md_file
) > tmp-codes.h
1658 $(srcdir)/move-if-change tmp-codes.h insn-codes.h
1661 insn-emit.o
: insn-emit.c
$(CONFIG_H
) $(RTL_H
) $(EXPR_H
) real.h output.h \
1662 insn-config.h insn-flags.h insn-codes.h system.h reload.h recog.h
1663 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-emit.c
1665 insn-emit.c
: s-emit
; @true
1666 s-emit
: $(md_file
) genemit
$(srcdir)/move-if-change
1667 .
/genemit
$(md_file
) > tmp-emit.c
1668 $(srcdir)/move-if-change tmp-emit.c insn-emit.c
1671 insn-recog.o
: insn-recog.c
$(CONFIG_H
) $(RTL_H
) insn-config.h
$(RECOG_H
) \
1672 real.h output.h flags.h system.h
1673 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-recog.c
1675 insn-recog.c
: s-recog
; @true
1676 s-recog
: $(md_file
) genrecog
$(srcdir)/move-if-change
1677 .
/genrecog
$(md_file
) > tmp-recog.c
1678 $(srcdir)/move-if-change tmp-recog.c insn-recog.c
1681 insn-opinit.o
: insn-opinit.c
$(CONFIG_H
) $(RTL_H
) insn-codes.h insn-flags.h \
1682 insn-config.h flags.h
$(RECOG_H
) $(EXPR_H
) reload.h system.h
1683 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-opinit.c
1685 insn-opinit.c
: s-opinit
; @true
1686 s-opinit
: $(md_file
) genopinit
$(srcdir)/move-if-change
1687 .
/genopinit
$(md_file
) > tmp-opinit.c
1688 $(srcdir)/move-if-change tmp-opinit.c insn-opinit.c
1691 insn-extract.o
: insn-extract.c
$(CONFIG_H
) $(RTL_H
) system.h toplev.h \
1692 insn-config.h recog.h
1693 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-extract.c
1695 insn-extract.c
: s-extract
; @true
1696 s-extract
: $(md_file
) genextract
$(srcdir)/move-if-change
1697 .
/genextract
$(md_file
) > tmp-extract.c
1698 $(srcdir)/move-if-change tmp-extract.c insn-extract.c
1701 insn-peep.o
: insn-peep.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) output.h real.h \
1702 system.h insn-config.h recog.h
1703 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-peep.c
1705 insn-peep.c
: s-peep
; @true
1706 s-peep
: $(md_file
) genpeep
$(srcdir)/move-if-change
1707 .
/genpeep
$(md_file
) > tmp-peep.c
1708 $(srcdir)/move-if-change tmp-peep.c insn-peep.c
1711 insn-attrtab.o
: insn-attrtab.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) real.h \
1712 output.h insn-attr.h insn-config.h system.h toplev.h
1713 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-attrtab.c
1715 insn-attr.h
: s-attr
; @true
1716 s-attr
: $(md_file
) genattr
$(srcdir)/move-if-change
1717 .
/genattr
$(md_file
) > tmp-attr.h
1718 $(srcdir)/move-if-change tmp-attr.h insn-attr.h
1721 insn-attrtab.c
: s-attrtab
; @true
1722 s-attrtab
: $(md_file
) genattrtab
$(srcdir)/move-if-change
1723 if cmp
-s
$(PREMADE_ATTRTAB_MD
) $(md_file
); \
1725 echo Using
$(PREMADE_ATTRTAB
); \
1726 cp
$(PREMADE_ATTRTAB
) tmp-attrtab.c
; \
1728 .
/genattrtab
$(md_file
) > tmp-attrtab.c
; \
1730 $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c
1733 insn-output.o
: insn-output.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) real.h conditions.h \
1734 hard-reg-set.h insn-config.h insn-flags.h insn-attr.h output.h
$(RECOG_H
) \
1735 insn-codes.h system.h
1736 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-output.c
1738 insn-output.c
: s-output
; @true
1739 s-output
: $(md_file
) genoutput
$(srcdir)/move-if-change
1740 .
/genoutput
$(md_file
) > tmp-output.c
1741 $(srcdir)/move-if-change tmp-output.c insn-output.c
1744 genrtl.o
: genrtl.c
$(CONFIG_H
) $(RTL_H
) system.h
1745 genrtl.c genrtl.h
: s-genrtl
1746 @true
# force gnu make to recheck modification times.
1748 s-genrtl
: gengenrtl
$(srcdir)/move-if-change
$(RTL_BASE_H
)
1749 .
/gengenrtl tmp-genrtl.h tmp-genrtl.c
1750 $(srcdir)/move-if-change tmp-genrtl.h genrtl.h
1751 $(srcdir)/move-if-change tmp-genrtl.c genrtl.c
1755 # Compile the programs that generate insn-* from the machine description.
1756 # They are compiled with $(HOST_CC), and associated libraries,
1757 # since they need to run on this machine
1758 # even if GCC is being compiled to run on some other machine.
1760 # $(CONFIG_H) is omitted from the deps of the gen*.o
1761 # because these programs don't really depend on anything
1762 # about the target machine. They do depend on config.h itself,
1763 # since that describes the host machine.
1765 # Pass the md file through cpp if the target requests it.
1766 $(MD_FILE
): $(MD_DEPS
)
1768 $(MD_CPP
) $(MD_CPPFLAGS
) $(md_file
) | sed
's/^# /; /g' > tmp-
$@
1771 genconfig
: genconfig.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1772 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1773 genconfig.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1775 genconfig.o
: genconfig.c
$(RTL_H
) $(build_xm_file
) system.h
1776 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genconfig.c
1778 genflags
: genflags.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1779 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1780 genflags.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1782 genflags.o
: genflags.c
$(RTL_H
) $(build_xm_file
) system.h
1783 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genflags.c
1785 gencodes
: gencodes.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1786 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1787 gencodes.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1789 gencodes.o
: gencodes.c
$(RTL_H
) $(build_xm_file
) system.h
1790 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gencodes.c
1792 genemit
: genemit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1793 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1794 genemit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1796 genemit.o
: genemit.c
$(RTL_H
) $(build_xm_file
) system.h
1797 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genemit.c
1799 genopinit
: genopinit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1800 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1801 genopinit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1803 genopinit.o
: genopinit.c
$(RTL_H
) $(build_xm_file
) system.h
1804 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genopinit.c
1806 genrecog
: genrecog.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1807 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1808 genrecog.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1810 genrecog.o
: genrecog.c
$(RTL_H
) $(build_xm_file
) system.h
1811 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genrecog.c
1813 genextract
: genextract.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1814 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1815 genextract.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1817 genextract.o
: genextract.c
$(RTL_H
) $(build_xm_file
) system.h insn-config.h
1818 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genextract.c
1820 genpeep
: genpeep.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1821 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1822 genpeep.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1824 genpeep.o
: genpeep.c
$(RTL_H
) $(build_xm_file
) system.h
1825 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genpeep.c
1827 genattr
: genattr.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1828 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1829 genattr.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1831 genattr.o
: genattr.c
$(RTL_H
) $(build_xm_file
) system.h
1832 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genattr.c
1834 genattrtab
: genattrtab.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_RTLANAL
) $(HOST_LIBDEPS
)
1835 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1836 genattrtab.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_RTLANAL
) $(HOST_LIBS
)
1838 genattrtab.o
: genattrtab.c
$(RTL_H
) $(build_xm_file
) system.h insn-config.h
1839 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genattrtab.c
1841 genoutput
: genoutput.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1842 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1843 genoutput.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1845 genoutput.o
: genoutput.c
$(RTL_H
) $(build_xm_file
) system.h
1846 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genoutput.c
1848 gengenrtl
: gengenrtl.o
$(HOST_LIBDEPS
)
1849 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1850 gengenrtl.o
$(HOST_LIBS
)
1852 gengenrtl.o
: gengenrtl.c
$(RTL_BASE_H
) system.h
1853 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gengenrtl.c
1856 # Compile the libraries to be used by gen*.
1857 # If we are not cross-building, gen* use the same .o's that cc1 will use,
1858 # and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict
1859 # with the rules for rtl.o, alloca.o, etc.
1860 $(HOST_PREFIX_1
)rtl.o
: $(srcdir)/rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h
1861 rm -f
$(HOST_PREFIX
)rtl.c
1862 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/rtl.c
> $(HOST_PREFIX
)rtl.c
1863 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)rtl.c
1865 $(HOST_PREFIX_1
)print-rtl.o
: $(srcdir)/print-rtl.c
$(CONFIG_H
) $(RTL_H
) \
1866 bitmap.h basic-block.h
1867 rm -f
$(HOST_PREFIX
)print-rtl.c
1868 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/print-rtl.c
> $(HOST_PREFIX
)print-rtl.c
1869 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)print-rtl.c
1871 $(HOST_PREFIX_1
)bitmap.o
: $(srcdir)/bitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1872 flags.h
$(BASIC_BLOCK_H
) $(REGS_H
)
1873 rm -f
$(HOST_PREFIX
)bitmap.c
1874 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/bitmap.c
> $(HOST_PREFIX
)bitmap.c
1875 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)bitmap.c
1877 $(HOST_PREFIX_1
)rtlanal.o
: $(srcdir)/rtlanal.c
$(CONFIG_H
) $(RTL_H
)
1878 rm -f
$(HOST_PREFIX
)rtlanal.c
1879 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/rtlanal.c
> $(HOST_PREFIX
)rtlanal.c
1880 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)rtlanal.c
1882 $(HOST_PREFIX_1
)alloca.o
: $(srcdir)/..
/libiberty
/alloca.c
1883 rm -f
$(HOST_PREFIX
)alloca.c
1884 $(LN_S
) $(srcdir)/..
/libiberty
/alloca.c
$(HOST_PREFIX
)alloca.c
1885 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)alloca.c
1887 $(HOST_PREFIX_1
)obstack.o
: $(srcdir)/..
/libiberty
/obstack.c
1888 rm -f
$(HOST_PREFIX
)obstack.c
1889 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/..
/libiberty
/obstack.c
> $(HOST_PREFIX
)obstack.c
1890 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)obstack.c
1892 $(HOST_PREFIX_1
)vfprintf.o
: $(srcdir)/..
/libiberty
/vfprintf.c
1893 rm -f
$(HOST_PREFIX
)vfprintf.c
1894 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/..
/libiberty
/vfprintf.c
> $(HOST_PREFIX
)vfprintf.c
1895 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)vfprintf.c
1897 $(HOST_PREFIX_1
)doprint.o
: doprint.c
1898 rm -f
$(HOST_PREFIX
)doprint.c
1899 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/doprint.c
> $(HOST_PREFIX
)doprint.c
1900 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)doprint.c
1902 $(HOST_PREFIX_1
)malloc.o
: malloc.c
1903 rm -f
$(HOST_PREFIX
)malloc.c
1904 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/malloc.c
> $(HOST_PREFIX
)malloc.c
1905 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)malloc.c
1907 # This satisfies the dependency that we get if you cross-compile a compiler
1908 # that does not need to compile alloca, malloc or whatever.
1910 touch
$(HOST_PREFIX_1
)
1914 # Remake internationalization support.
1916 intl.o
: intl.c intl.h gansidecl.h Makefile
1917 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1918 -DLOCALEDIR
=\"$(localedir
)\" \
1919 -c
`echo $(srcdir)/intl.c | sed 's,^\./,,'`
1921 # This is needed to when doing a partial build after a `make clean'.
1922 # libintl.a does not depend on intl.all,
1923 # as that would force a lot of recompiling.
1924 $(top_builddir
)/intl
/libintl.a
:
1925 @echo
"$(MAKE) intl.all"
1926 @
$(MAKE
) $(FLAGS_TO_PASS
) intl.
all
1928 # Make sure all the headers are there for xgettext to scan.
1929 $(INTL_TARGETS
): $(srcdir)/c-gperf.h \
1930 $(srcdir)/c-parse.c
$(srcdir)/c-parse.h
$(srcdir)/cexp.c
1932 intl.
all intl.
install intl.
uninstall intl.distdir \
1933 intl.
mostlyclean intl.
clean intl.
distclean intl.maintainer-clean
:
1934 @for d in
$(INTL_SUBDIRS
); do \
1935 target
=`expr $@ : 'intl.\(.*\)'` && \
1936 echo
"(cd $$d && $(MAKE) $$target)" && \
1937 (cd
$$d && AWK
='$(AWK)' $(MAKE
) $(SUBDIR_FLAGS_TO_PASS
) $$target); \
1940 # intl.distdir doesn't copy the intl makefiles (since they aren't distributed),
1941 # but we need them for the `make extraclean' in distdir-finish.
1943 for d in
$(INTL_SUBDIRS
); do \
1944 ln
$$d/Makefile tmp
/$$d || cp
$$d/Makefile tmp
/$$d || exit
; \
1947 # Remake cpp and protoize.
1949 # Making the preprocessor
1950 cpp$(exeext
): $(CCCP
)$(exeext
)
1952 $(LN
) $(CCCP
)$(exeext
) cpp$(exeext
)
1953 CCCP_OBJS
= cccp.o cexp.o intl.o
prefix.o version.o @extra_cpp_objs@ mbchar.o
1954 cccp
$(exeext
): $(CCCP_OBJS
) $(LIBDEPS
)
1955 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(CCCP_OBJS
) $(LIBS
)
1956 cexp.o
: $(srcdir)/cexp.c
$(CONFIG_H
) system.h
1957 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c
$(srcdir)/cexp.c
1958 $(srcdir)/cexp.c
: $(srcdir)/cexp.y
1959 cd
$(srcdir); $(BISON
) -o cexp.c cexp.y
1961 # We use $(libsubdir)/$(unlibsubdir) to match the
1962 # -iprefix argument which gcc will pass if GCC_EXEC_PREFIX is used.
1963 cccp.o
: cccp.c
$(CONFIG_H
) intl.h pcp.h version.c config.status system.h \
1964 mbchar.h
prefix.h Makefile.in
1965 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1966 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
1967 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gcc_gxx_include_dir
)\" \
1968 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
1969 -DCROSS_INCLUDE_DIR
=\"$(gcc_tooldir
)/sys-include
\" \
1970 -DTOOL_INCLUDE_DIR
=\"$(gcc_tooldir
)/include\" \
1971 -c
`echo $(srcdir)/cccp.c | sed 's,^\./,,'`
1973 LIBCPP_OBJS
= cpplib.o cpphash.o cppalloc.o cpperror.o cppexp.o cppfiles.o \
1974 cppinit.o cppulp.o
prefix.o version.o mbchar.o @extra_cpp_objs@
1976 # All the other archives built/used by this makefile are for targets. This
1977 # one is strictly for the host.
1979 libcpp.a
: $(LIBCPP_OBJS
)
1980 $(AR
) $(AR_FLAGS
) libcpp.a
$(LIBCPP_OBJS
)
1981 if
$(RANLIB_TEST
) ; then
$(RANLIB
) libcpp.a
; else true
; fi
1983 cppmain
$(exeext
): cppmain.o intl.o libcpp.a
$(LIBDEPS
)
1984 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o cppmain
$(exeext
) cppmain.o \
1985 intl.o libcpp.a
$(LIBS
)
1987 cppmain.o
: cppmain.c
$(CONFIG_H
) cpplib.h intl.h system.h
1989 cppulp.o
: cppulp.c
$(CONFIG_H
) system.h output.h
1990 cpplib.o
: cpplib.c
$(CONFIG_H
) cpplib.h intl.h system.h cpphash.h
1991 cpphash.o
: cpphash.c
$(CONFIG_H
) cpplib.h intl.h system.h cpphash.h
1992 cppalloc.o
: cppalloc.c
$(CONFIG_H
) cpplib.h intl.h system.h
1993 cpperror.o
: cpperror.c
$(CONFIG_H
) cpplib.h intl.h system.h
1994 cppexp.o
: cppexp.c
$(CONFIG_H
) cpplib.h intl.h system.h
1995 cppfiles.o
: cppfiles.c
$(CONFIG_H
) cpplib.h intl.h system.h
1997 cppinit.o
: cppinit.c
$(CONFIG_H
) cpplib.h intl.h system.h \
1998 cpphash.h
prefix.h output.h Makefile
1999 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2000 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
2001 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gcc_gxx_include_dir
)\" \
2002 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
2003 -DCROSS_INCLUDE_DIR
=\"$(gcc_tooldir
)/sys-include
\" \
2004 -DTOOL_INCLUDE_DIR
=\"$(gcc_tooldir
)/include\" \
2005 -c
`echo $(srcdir)/cppinit.c | sed 's,^\./,,'`
2007 # Note for the stamp targets, we run the program `true' instead of
2008 # having an empty command (nothing following the semicolon).
2010 proto
: config.status protoize
$(exeext
) unprotoize
$(exeext
) SYSCALLS.c.X
2012 PROTO_OBJS
= getpwd.o intl.o version.o
2014 protoize
$(exeext
): protoize.o
$(PROTO_OBJS
) $(LIBDEPS
)
2015 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ protoize.o
$(PROTO_OBJS
) $(LIBS
)
2017 unprotoize
$(exeext
): unprotoize.o
$(PROTO_OBJS
) $(LIBDEPS
)
2018 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ unprotoize.o
$(PROTO_OBJS
) $(LIBS
)
2020 protoize.o
: protoize.c
$(srcdir)/..
/include/getopt.h
$(CONFIG_H
) system.h \
2022 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2023 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
2024 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gcc_gxx_include_dir
)\" \
2025 -DCROSS_INCLUDE_DIR
=\"$(gcc_tooldir
)/sys-include
\" \
2026 -DTOOL_INCLUDE_DIR
=\"$(gcc_tooldir
)/include\" \
2027 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
2028 -DSTD_PROTO_DIR
=\"$(libsubdir
)\" \
2029 $(srcdir)/protoize.c
2031 unprotoize.o
: unprotoize.c protoize.c
$(srcdir)/..
/include/getopt.h \
2032 $(CONFIG_H
) system.h Makefile
2033 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2034 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
2035 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gcc_gxx_include_dir
)\" \
2036 -DCROSS_INCLUDE_DIR
=\"$(gcc_tooldir
)/sys-include
\" \
2037 -DTOOL_INCLUDE_DIR
=\"$(gcc_tooldir
)/include\" \
2038 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
2039 -DSTD_PROTO_DIR
=\"$(libsubdir
)\" \
2040 $(srcdir)/unprotoize.c
2042 # This info describes the target machine, so compile with GCC just built.
2043 SYSCALLS.c.X
: $(srcdir)/sys-types.h
$(srcdir)/sys-protos.h
$(GCC_PASSES
) \
2045 -rm -f SYSCALLS.c tmp-SYSCALLS.s
2046 cat
$(srcdir)/sys-types.h
$(srcdir)/sys-protos.h
> SYSCALLS.c
2047 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2048 -aux-info
$@
-S
-o tmp-SYSCALLS.s SYSCALLS.c
2049 -rm -f SYSCALLS.c tmp-SYSCALLS.s
2052 test-protoize-simple
: .
/protoize .
/unprotoize
$(GCC_PASSES
)
2053 -rm -f tmp-proto.
[cso
]
2054 cp
$(srcdir)/protoize.c tmp-proto.c
2055 chmod u
+w tmp-proto.c
2056 .
/protoize
-N
-B .
/ -x getopt.h
-c
"-B./ -Wall -Wwrite-strings \
2057 $(CFLAGS) $(INCLUDES) \
2058 -DGCC_INCLUDE_DIR=0 \
2059 -DGPLUSPLUS_INCLUDE_DIR=0 \
2060 -DCROSS_INCLUDE_DIR=0 \
2061 -DTOOL_INCLUDE_DIR=0 \
2062 -DSTD_PROTO_DIR=0" tmp-proto.c
2063 @echo
'**********' Expect
400 lines of differences.
2064 -diff
$(srcdir)/protoize.c tmp-proto.c
> tmp-proto.diff
2065 -wc
-l tmp-proto.diff
2066 .
/unprotoize
-N
-x getopt.h
-c
"-B./ -Wall -Wwrite-strings \
2067 $(CFLAGS) $(INCLUDES) \
2068 -DGCC_INCLUDE_DIR=0 \
2069 -DGPLUSPLUS_INCLUDE_DIR=0 \
2070 -DCROSS_INCLUDE_DIR=0 \
2071 -DTOOL_INCLUDE_DIR=0 \
2072 -DSTD_PROTO_DIR=0" tmp-proto.c
2073 @echo Expect zero differences.
2074 diff
$(srcdir)/protoize.c tmp-proto.c | cat
2075 -rm -f tmp-proto.
[cs
] tmp-proto
$(objext
)
2077 gcov.o
: gcov.c gcov-io.h intl.h system.h
2079 # Only one of 'gcov' or 'gcov.exe' is actually built, depending
2080 # upon whether $(exeext) is empty or not.
2081 GCOV_OBJS
= gcov.o intl.o
2082 gcov
$(exeext
): $(GCOV_OBJS
) $(LIBDEPS
)
2083 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) $(GCOV_OBJS
) $(LIBS
) -o
$@
2085 # Build the include directory. The stamp files are stmp-* rather than
2086 # s-* so that mostlyclean does not force the include directory to
2089 # Build the include directory including float.h (which no longer depends upon
2091 stmp-int-hdrs
: stmp-fixinc
$(USER_H
) xlimits.h
2092 # Copy in the headers provided with gcc.
2093 # The sed command gets just the last file name component;
2094 # this is necessary because VPATH could add a dirname.
2095 # Using basename would be simpler, but some systems don't have it.
2096 # The touch command is here to workaround an AIX/Linux NFS bug.
2097 for file in ..
$(USER_H
); do \
2098 if
[ X
$$file != X..
]; then \
2099 realfile
=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
2100 touch
include/$$realfile; \
2101 rm -f
include/$$realfile; \
2102 cp
$$file include; \
2103 chmod a
+r
include/$$realfile; \
2106 rm -f
include/limits.h
2107 cp xlimits.h
include/limits.h
2108 chmod a
+r
include/limits.h
2109 rm -f
include/float.h
2110 if
[ x
$(FLOAT_H
) != xMakefile.in
]; then \
2111 cp
$(srcdir)/config
/$(FLOAT_H
) include/float.h
&& \
2112 chmod a
+r
include/float.h
; \
2114 # Install the README
2115 rm -f
include/README
2116 cp
$(srcdir)/README-fixinc
include/README
2117 chmod a
+r
include/README
2120 # Now that float.h no longer depends upon enquire, this is actually a no-op.
2124 FIXINCSRCDIR
=$(srcdir)/fixinc
2125 fixinc.sh
: $(FIXINCSRCDIR
)/mkfixinc.sh
$(FIXINCSRCDIR
)/fixincl.c \
2126 $(FIXINCSRCDIR
)/procopen.c
$(FIXINCSRCDIR
)/gnu-regex.c \
2127 $(FIXINCSRCDIR
)/server.c
$(FIXINCSRCDIR
)/gnu-regex.h \
2128 $(FIXINCSRCDIR
)/server.h
$(FIXINCSRCDIR
)/inclhack.def
2129 MAKE
="$(MAKE)"; srcdir=`cd $(srcdir)/fixinc; pwd` ; \
2130 export MAKE
srcdir ; \
2131 cd .
/fixinc
; $(SHELL
) $${srcdir}/mkfixinc.sh
$(target
)
2133 ##stmp-fixinc: $(FIXINCLUDES) gsyslimits.h
2136 ## if [ x$(FIXINCLUDES) != xMakefile.in ]; \
2138 ## for dir in $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS); do \
2139 ## if [ -d $$dir ]; \
2141 ## $(SHELL) $(srcdir)/$(FIXINCLUDES) include $$dir; \
2144 ## if [ x$(INSTALL_ASSERT_H) != x ] ; \
2146 ## rm -f include/assert.h; \
2147 ## cp $(srcdir)/assert.h include/assert.h; \
2148 ## chmod a+r include/assert.h; \
2153 # Build fixed copies of system files.
2154 stmp-fixinc
: fixinc.sh gsyslimits.h
2155 rm -rf
include; mkdir
include
2156 TARGET_MACHINE
=$(target
); srcdir=`cd $(srcdir); pwd`; \
2157 INSTALL_ASSERT_H
=$(INSTALL_ASSERT_H
); SHELL
=$(SHELL
) ;\
2158 export TARGET_MACHINE
srcdir INSTALL_ASSERT_H SHELL
; \
2159 $(SHELL
) .
/fixinc.sh
`pwd`/include $(SYSTEM_HEADER_DIR
) $(OTHER_FIXINCLUDES_DIRS
)
2160 rm -f
include/syslimits.h
2161 if
[ -f
include/limits.h
]; then \
2162 mv
include/limits.h
include/syslimits.h
; \
2164 cp
$(srcdir)/gsyslimits.h
include/syslimits.h
; \
2166 chmod a
+r
include/syslimits.h
2167 # If $(SYSTEM_HEADER_DIR) is $(tooldir)/sys-include, and
2168 # that directory exists, then make sure that $(libsubdir) exists.
2169 # This is because cpp is compiled to find $(tooldir)/include via
2170 # $(libsubdir)/$(unlibsubdir), which will only work if $(libsubdir)
2172 # We deliberately use tooldir instead of gcc_tooldir here. gcc_tooldir
2173 # won't work because libsubdir doesn't exist yet.
2174 if
[ "$(SYSTEM_HEADER_DIR)" = "$(tooldir)/sys-include" ] \
2175 && [ -d
$(tooldir
)/sys-include
]; then \
2176 if
[ -d
$(libdir) ] ; then true
; else mkdir
$(libdir) ; fi
; \
2177 if
[ -d
$(libdir)/gcc-lib
] ; then true
; else mkdir
$(libdir)/gcc-lib
; fi
; \
2178 if
[ -d
$(libdir)/gcc-lib
/$(target_alias
) ] ; then true
; else mkdir
$(libdir)/gcc-lib
/$(target_alias
) ; fi
; \
2179 if
[ -d
$(libdir)/gcc-lib
/$(target_alias
)/$(version
) ] ; then true
; else mkdir
$(libdir)/gcc-lib
/$(target_alias
)/$(version
) ; fi
; \
2184 # Files related to the fixproto script.
2186 deduced.h
: $(GCC_PASSES
) $(srcdir)/scan-types.sh stmp-int-hdrs
2187 if
[ -d
$(SYSTEM_HEADER_DIR
) ]; \
2189 CC
="$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -I. -I$(srcdir) -Iinclude -I${SYSTEM_HEADER_DIR}"; \
2191 $(SHELL
) $(srcdir)/scan-types.sh
"$(srcdir)" >tmp-deduced.h
; \
2192 mv tmp-deduced.h deduced.h
; \
2197 GEN_PROTOS_OBJS
= gen-protos.o scan.o libcpp.a
2198 gen-protos
: $(GEN_PROTOS_OBJS
) $(HOST_LIBDEPS
)
2199 ${HOST_CC} $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o gen-protos \
2200 $(GEN_PROTOS_OBJS
) $(HOST_LIBS
)
2202 gen-protos.o
: gen-protos.c scan.h
$(build_xm_file
) system.h
2203 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gen-protos.c
2205 scan.o
: scan.c scan.h
$(build_xm_file
) system.h
2206 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/scan.c
2208 xsys-protos.h
: $(GCC_PASSES
) $(srcdir)/sys-protos.h deduced.h gen-protos Makefile
2209 cat deduced.h
$(srcdir)/sys-protos.h
> tmp-fixtmp.c
2210 mv tmp-fixtmp.c fixtmp.c
2211 $(GCC_FOR_TARGET
) fixtmp.c
-w
-U__SIZE_TYPE__
-U__PTRDIFF_TYPE__
-U__WCHAR_TYPE__
-E \
2212 | sed
-e
's/ / /g' -e
's/ *(/ (/g' -e
's/ [ ]*/ /g' -e
's/( )/()/' \
2213 | .
/gen-protos
>xsys-protos.hT
2214 mv xsys-protos.hT xsys-protos.h
2217 fix-header
: fix-header.o scan-decls.o scan.o xsys-protos.h
$(HOST_LIBDEPS
) \
2219 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ fix-header.o \
2220 scan-decls.o scan.o libcpp.a
$(HOST_LIBS
)
2222 fix-header.o
: fix-header.c
$(srcdir)/..
/include/obstack.h scan.h \
2223 xsys-protos.h
$(build_xm_file
) system.h cpplib.h cpphash.h
2224 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/fix-header.c
2226 scan-decls.o
: scan-decls.c scan.h cpplib.h
$(build_xm_file
) system.h
2227 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/scan-decls.c
2229 # stmp-fixproto depends on this, not on fix-header directly.
2230 # The idea is to make sure fix-header gets built,
2231 # but not rerun fixproto after each stage
2232 # just because fix-header's mtime has changed.
2233 fixhdr.ready
: fix-header
2234 -if
[ -f fixhdr.ready
] ; then \
2237 touch fixhdr.ready
; \
2240 # stmp-headers is to make sure fixincludes has already finished.
2241 # The if statement is so that we don't run fixproto a second time
2242 # if it has already been run on the files in `include'.
2243 stmp-fixproto
: fixhdr.ready fixproto stmp-headers
2244 @echo
"Various warnings and error messages from fixproto are normal"
2245 -if
[ -d
include ] ; then true
; else mkdir
include; fi
2246 -if
[ -f
include/fixed
] ; then true
; \
2248 : This line works around a
'make' bug in BSDI
1.1.
; \
2249 FIXPROTO_DEFINES
="$(FIXPROTO_DEFINES)"; export FIXPROTO_DEFINES
; \
2250 mkinstalldirs
="$(SHELL) $(srcdir)/mkinstalldirs"; \
2251 export mkinstalldirs
; \
2252 if
[ -d
$(SYSTEM_HEADER_DIR
) ] ; then \
2253 $(SHELL
) ${srcdir}/fixproto
include include $(SYSTEM_HEADER_DIR
); \
2255 touch
include/fixed
; \
2259 # Remake the info files.
2262 info: cpp.
info gcc.
info lang.
info
2264 cpp.
info: $(srcdir)/cpp.texi
2265 $(MAKEINFO
) $(MAKEINFOFLAGS
) -I
$(srcdir) -o
cpp.
info $(srcdir)/cpp.texi
2267 gcc.
info: $(srcdir)/gcc.texi
$(srcdir)/extend.texi
$(srcdir)/install.texi \
2268 $(srcdir)/invoke.texi
$(srcdir)/md.texi
$(srcdir)/rtl.texi \
2269 $(srcdir)/tm.texi
$(srcdir)/gcov.texi
2270 $(MAKEINFO
) $(MAKEINFOFLAGS
) -I
$(srcdir) -o gcc.
info $(srcdir)/gcc.texi
2272 dvi: gcc.
dvi cpp.
dvi lang.
dvi
2274 # This works with GNU Make's default rule.
2275 gcc.
dvi: $(srcdir)/gcc.texi
$(srcdir)/extend.texi
$(srcdir)/install.texi \
2276 $(srcdir)/invoke.texi
$(srcdir)/md.texi
$(srcdir)/rtl.texi \
2277 $(srcdir)/tm.texi
$(srcdir)/gcov.texi
2278 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
2280 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
2282 cpp.
dvi: $(srcdir)/cpp.texi
2283 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
2285 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
2288 INSTALL
: $(srcdir)/install1.texi
$(srcdir)/install.texi
2289 cd
$(srcdir); $(MAKEINFO
) -D INSTALLONLY \
2290 --no-split
-o INSTALL install1.texi
2292 # Deletion of files made during compilation.
2293 # There are four levels of this:
2294 # `mostlyclean', `clean', `distclean' and `maintainer-clean'.
2295 # `mostlyclean' is useful while working on a particular type of machine.
2296 # It deletes most, but not all, of the files made by compilation.
2297 # It does not delete libgcc.a or its parts, so it won't have to be recompiled.
2298 # `clean' deletes everything made by running `make all'.
2299 # `distclean' also deletes the files made by config.
2300 # `maintainer-clean' also deletes everything that could be regenerated
2301 # automatically, except for `configure'.
2302 # We remove as much from the language subdirectories as we can
2303 # (less duplicated code).
2306 mostlyclean: intl.
mostlyclean lang.
mostlyclean
2307 -rm -f
$(STAGESTUFF
)
2308 # Delete the temporary source copies for cross compilation.
2309 -rm -f
$(HOST_PREFIX_1
)rtl.c
$(HOST_PREFIX_1
)rtlanal.c
2310 -rm -f
$(HOST_PREFIX_1
)alloca.c
$(HOST_PREFIX_1
)malloc.c
2311 -rm -f
$(HOST_PREFIX_1
)obstack.c
2312 # Delete the temp files made in the course of building libgcc.a.
2313 -rm -f tmplibgcc
* tmpcopy xlimits.h libgcc1-test
2314 for name in
$(LIB1FUNCS
); do
rm -f
$${name}.c
; done
2315 # Delete other built files.
2316 -rm -f t-float.h-cross xsys-protos.hT fp-bit.c dp-bit.c
2317 # Delete the stamp and temporary files.
2318 -rm -f s-
* tmp-
* stamp-
* stmp-
*
2319 -rm -f
*/stamp-
* */tmp-
*
2320 # Delete debugging dump files.
2321 -rm -f
*.greg
*.lreg
*.combine
*.flow
*.cse
*.jump
*.rtl
*.tree
*.loop
2322 -rm -f
*.dbr
*.jump2
*.sched
*.cse2
*.sched2
*.stack
*.addressof
2323 -rm -f
*.regmove
*.mach
*.bp
*.gcse
*.flow2
2324 -rm -f
*/*.greg
*/*.lreg
*/*.combine
*/*.flow
*/*.cse
*/*.jump
*/*.rtl
2325 -rm -f
*/*.tree
*/*.loop
*/*.dbr
*/*.jump2
*/*.sched
*/*.cse2
2326 -rm -f
*/*.sched2
*/*.stack
*/*.regmove
*/*.gcse
*/*.flow2
2327 # Delete some files made during installation.
2328 -rm -f specs float.h-
* enquire SYSCALLS.c.X SYSCALLS.c
2329 -rm -f collect collect2 mips-tfile mips-tdump alloca.s
2330 # Delete files generated for fixproto
2331 -rm -rf fix-header xsys-protos.h deduced.h tmp-deduced.h \
2332 gen-protos fixproto.list fixtmp.
* fixhdr.ready
2333 # Delete unwanted output files from TeX.
2334 -rm -f
*.toc
*.log
*.vr
*.fn
*.cp
*.tp
*.ky
*.pg
2335 -rm -f
*/*.toc
*/*.log
*/*.vr
*/*.fn
*/*.cp
*/*.tp
*/*.ky
*/*.pg
2336 # Delete sorted indices we don't actually use.
2337 -rm -f gcc.vrs gcc.kys gcc.tps gcc.pgs gcc.fns
2338 # Delete core dumps.
2342 # Delete all files made by compilation
2343 # that don't exist in the distribution.
2344 clean: mostlyclean intl.
clean lang.
clean
2345 # It may not be quite desirable to delete unprotoize.c here,
2346 # but the spec for `make clean' requires it.
2347 # Using unprotoize.c is not quite right in the first place,
2348 # but what better way is there?
2349 -rm -f libgcc.a libgcc1.a libgcc1-asm.a libgcc2.a libgcc2.ready
2353 -if
[ -f md.pre-cpp
]; then \
2356 # Delete the include directory.
2358 # Delete files used by the "multilib" facility (including libgcc subdirs).
2359 -rm -f multilib.h tmpmultilib
*
2360 -if
[ "x$(MULTILIB_DIRNAMES)" != x
] ; then \
2361 rm -rf
$(MULTILIB_DIRNAMES
); \
2362 else if
[ "x$(MULTILIB_OPTIONS)" != x
] ; then \
2363 rm -rf
`echo $(MULTILIB_OPTIONS) | sed -e 's/\// /g'`; \
2365 -rm -fr stage1 stage2 stage3 stage4
2367 # Delete all files that users would normally create
2368 # while building and installing GCC.
2369 INTL_DISTCLEAN
= intl.
distclean
2370 distclean: clean $(INTL_DISTCLEAN
) lang.
distclean
2371 -rm -f tm.h config.h auto-host.h auto-build.h tconfig.h hconfig.h
2373 -rm -f config.status config.run config.cache config.bak
2374 -rm -f Make-lang Make-hooks Make-host Make-target
2375 -rm -f Makefile specs.h options.h gencheck.h
*.oaux
2376 -rm -f gthr-default.h
2377 -rm -f
*/stage1
*/stage2
*/stage3
*/stage4
*/include
2378 -rm -f c-parse.output
2381 -rm -f site.exp site.bak testsuite
/site.exp testsuite
/site.bak
2382 -rm -f testsuite
/{gcc
,g
++}.
{log
,sum
}
2383 -rm -f intl
/libintl.h libintl.h
2385 # Delete anything likely to be found in the source directory
2386 # that shouldn't be in the distribution.
2387 extraclean
: distclean lang.extraclean
2388 -rm -rf
=* .
/"#"* *~
* config
/=* config
/"#"* config
/*~
*
2389 -rm -f patch
* *.orig
*.rej config
/patch
* config
/*.orig config
/*.rej
2390 -rm -f config
/*/=* config
/*/"#"* config
/*/*~
*
2391 -rm -f config
/*/*.orig config
/*/*.rej
2392 -rm -f
*.
dvi *.ps
*.oaux
*.d
*.
[zZ
] *.gz
2393 -rm -f
*.
tar *.xtar
*diff
*.diff.
* *.
tar.
* *.xtar.
* *diffs
2394 -rm -f
*lose config
/*lose config
/*/*lose
2395 -rm -f
*.s
*.s
[0-9] *.i config
/ChangeLog
2396 -rm -f y.tab.c
yacc.
*
2397 -rm -f
*/=* */"#"* */*~
*
2398 -rm -f
*/patch
* */*.orig
*/*.rej
2399 -rm -f
*/*.
dvi */*.oaux
*/*.d
*/*.
[zZ
] */*.gz
2400 -rm -f
*/*.
tar */*.xtar
*/*diff
*/*.diff.
* */*.
tar.
* */*.xtar.
* */*diffs
2401 -rm -f
*/*lose
*/*.s
*/*.s
[0-9] */*.i
2403 # Get rid of every file that's generated from some other file, except for `configure'.
2404 # Most of these files ARE PRESENT in the GCC distribution.
2405 # We define INTL_DISTCLEAN to be empty in the submake, so that
2406 # we don't descend into intl after its makefile has been removed.
2408 @echo
'This command is intended for maintainers to use; it'
2409 @echo
'deletes files that may need special tools to rebuild.'
2410 $(MAKE
) INTL_DISTCLEAN
= distclean \
2411 intl.maintainer-clean lang.maintainer-clean
2412 -rm -f c-parse.y c-gperf.h
2413 -rm -f c-parse.c c-parse.h c-parse.output
2414 -rm -f cexp.c cexp.output TAGS
2415 -rm -f
cpp.
info* cpp.??s
cpp.
*aux
2416 -rm -f gcc.
info* gcc.??s gcc.
*aux
2418 # Entry points `install' and `uninstall'.
2419 # Also use `install-collect2' to install collect2 when the config files don't.
2421 # The semicolon is to prevent the install.sh -> install default rule
2422 # from doing anything. Having it run true helps avoid problems and
2423 # noise from versions of make which don't like to have null commands.
2424 install: $(INSTALL_TARGET
) ; @true
2426 # Copy the compiler files into directories where they will be run.
2427 # Install the driver last so that the window when things are
2429 install-normal
: install-common
$(INSTALL_HEADERS
) $(INSTALL_LIBGCC
) \
2430 $(INSTALL_CPP
) install-man install-info intl.
install lang.install-normal \
2433 # Do nothing while making gcc with a cross-compiler. The person who
2434 # makes gcc for the target machine has to know how to put a complete
2435 # gcc together by hand.
2436 install-build
: force
2437 @echo You have to
install gcc on your target machine by hand.
2439 # Run this on the target machine
2440 # to finish installation of cross compiler.
2441 # This is not used anymore now that float.h does not depend on enquire.
2442 install-cross-rest
: install-float-h-cross
2444 # Handle cpp installation.
2445 install-cpp
: xcpp
$(exeext
)
2446 -rm -f
$(bindir)/$(CPP_INSTALL_NAME
)$(exeext
)
2447 $(INSTALL_PROGRAM
) -m
755 xcpp
$(exeext
) $(bindir)/$(CPP_INSTALL_NAME
)$(exeext
)
2448 if
[ x
$(cpp_install_dir
) != x
]; then \
2449 rm -f
$(prefix)/$(cpp_install_dir
)/$(CPP_INSTALL_NAME
)$(exeext
); \
2450 $(INSTALL_PROGRAM
) -m
755 xcpp
$(exeext
) $(prefix)/$(cpp_install_dir
)/$(CPP_INSTALL_NAME
)$(exeext
); \
2454 -rm -f
$(bindir)/cpp
2455 -if
[ x
$(cpp_install_dir
) != x
]; then \
2456 rm -f
$(prefix)/$(cpp_install_dir
)/cpp; \
2459 # Install float.h for cross compiler.
2460 # Run this on the target machine!
2461 # This is not used anymore now that float.h does not depend on enquire.
2462 install-float-h-cross
: installdirs
2463 # if [ -f enquire ] ; then true; else false; fi
2464 # Note: don't use -. We should fail right away if enquire was not made.
2465 .
/enquire
-f
> $(tmpdir
)/float.h
2466 -rm -f
$(libsubdir
)/include/float.h
2467 $(INSTALL_DATA
) $(tmpdir
)/float.h
$(libsubdir
)/include/float.h
2468 -rm -f
$(tmpdir
)/float.h
2469 chmod a-x
$(libsubdir
)/include/float.h
2471 # Create the installation directories.
2473 -if
[ -d
$(prefix) ] ; then true
; else mkdir
$(prefix) ; chmod a
+rx
$(prefix) ; fi
2474 -if
[ -d
$(exec_prefix) ] ; then true
; else mkdir
$(exec_prefix) ; chmod a
+rx
$(exec_prefix) ; fi
2475 -if
[ -d
$(libdir) ] ; then true
; else mkdir
$(libdir) ; chmod a
+rx
$(libdir) ; fi
2476 -if
[ -d
$(libdir)/gcc-lib
] ; then true
; else mkdir
$(libdir)/gcc-lib
; chmod a
+rx
$(libdir)/gcc-lib
; fi
2477 # This dir isn't currently searched by cpp.
2478 # -if [ -d $(libdir)/gcc-lib/include ] ; then true ; else mkdir $(libdir)/gcc-lib/include ; chmod a+rx $(libdir)/gcc-lib/include ; fi
2479 -fdir
= ; for
dir in
`echo $(libsubdir) | tr '/' ' '`; do \
2480 fdir
=$${fdir}/$${dir}; \
2481 if
[ -d
$${fdir} ] ; then true
; else mkdir
$${fdir}; chmod a
+rx
$${fdir}; fi
; \
2483 -if
[ -d
$(bindir) ] ; then true
; else mkdir
$(bindir) ; chmod a
+rx
$(bindir) ; fi
2484 -if
[ -d
$(includedir) ] ; then true
; else mkdir
$(includedir) ; chmod a
+rx
$(includedir) ; fi
2485 -if
[ -d
$(gcc_tooldir
) ] ; then true
; else mkdir
$(gcc_tooldir
) ; chmod a
+rx
$(gcc_tooldir
) ; fi
2486 -if
[ -d
$(assertdir
) ] ; then true
; else mkdir
$(assertdir
) ; chmod a
+rx
$(assertdir
) ; fi
2487 -if
[ -d
$(infodir) ] ; then true
; else mkdir
$(infodir) ; chmod a
+rx
$(infodir) ; fi
2488 # We don't use mkdir -p to create the parents of man1dir,
2489 # because some systems don't support it.
2490 # Instead, we use this technique to create the immediate parent of man1dir.
2491 -parent
=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \
2492 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; chmod a
+rx
$$parent ; fi
2493 -if
[ -d
$(man1dir) ] ; then true
; else mkdir
$(man1dir) ; chmod a
+rx
$(man1dir) ; fi
2495 # Install the compiler executables built during cross compilation.
2496 install-common
: native
installdirs $(EXTRA_PARTS
) lang.install-common
2497 for file in
$(COMPILERS
); do \
2498 if
[ -f
$$file ] ; then \
2499 rm -f
$(libsubdir
)/$$file; \
2500 $(INSTALL_PROGRAM
) $$file $(libsubdir
)/$$file; \
2504 for file in
$(EXTRA_PASSES
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
) ..
; do \
2505 if
[ x
"$$file" != x..
]; then \
2506 rm -f
$(libsubdir
)/$$file; \
2507 $(INSTALL_PROGRAM
) $$file $(libsubdir
)/$$file; \
2510 for file in
$(EXTRA_PARTS
) ..
; do \
2511 if
[ x
"$$file" != x..
]; then \
2512 rm -f
$(libsubdir
)/$$file; \
2513 $(INSTALL_DATA
) $$file $(libsubdir
)/$$file; \
2514 chmod a-x
$(libsubdir
)/$$file; \
2517 # Don't mess with specs if it doesn't exist yet.
2518 -if
[ -f specs
] ; then \
2519 rm -f
$(libsubdir
)/specs
; \
2520 $(INSTALL_DATA
) specs
$(libsubdir
)/specs
; \
2521 chmod a-x
$(libsubdir
)/specs
; \
2523 # Install protoize if it was compiled.
2524 -if
[ -f protoize
$(exeext
) ]; \
2526 if
[ -f gcc-cross
$(exeext
) ] ; then \
2527 rm -f
$(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
); \
2528 $(INSTALL_PROGRAM
) protoize
$(exeext
) $(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
); \
2529 rm -f
$(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
); \
2530 $(INSTALL_PROGRAM
) unprotoize
$(exeext
) $(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
); \
2532 rm -f
$(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
); \
2533 $(INSTALL_PROGRAM
) protoize
$(exeext
) $(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
); \
2534 rm -f
$(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
); \
2535 $(INSTALL_PROGRAM
) unprotoize
$(exeext
) $(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
); \
2537 rm -f
$(libsubdir
)/SYSCALLS.c.X
; \
2538 $(INSTALL_DATA
) SYSCALLS.c.X
$(libsubdir
)/SYSCALLS.c.X
; \
2539 chmod a-x
$(libsubdir
)/SYSCALLS.c.X
; \
2541 -rm -f
$(libsubdir
)/cpp$(exeext
)
2542 $(INSTALL_PROGRAM
) cpp$(exeext
) $(libsubdir
)/cpp$(exeext
)
2543 # Install gcov if it was compiled.
2544 -if
[ -f gcov
$(exeext
) ]; \
2546 rm -f
$(bindir)/gcov
$(exeext
); \
2547 $(INSTALL_PROGRAM
) gcov
$(exeext
) $(bindir)/$(GCOV_INSTALL_NAME
)$(exeext
); \
2550 # Install the driver program as $(target_alias)-gcc
2551 # and also as either gcc (if native) or $(gcc_tooldir)/bin/gcc.
2552 install-driver
: xgcc
$(exeext
)
2553 -if
[ -f gcc-cross
$(exeext
) ] ; then \
2554 rm -f
$(bindir)/$(GCC_CROSS_NAME
)$(exeext
); \
2555 $(INSTALL_PROGRAM
) gcc-cross
$(exeext
) $(bindir)/$(GCC_CROSS_NAME
)$(exeext
); \
2556 if
[ -d
$(gcc_tooldir
)/bin
/.
] ; then \
2557 rm -f
$(gcc_tooldir
)/bin
/gcc
$(exeext
); \
2558 $(INSTALL_PROGRAM
) gcc-cross
$(exeext
) $(gcc_tooldir
)/bin
/gcc
$(exeext
); \
2561 rm -f
$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
); \
2562 $(INSTALL_PROGRAM
) xgcc
$(exeext
) $(bindir)/$(GCC_INSTALL_NAME
)$(exeext
); \
2563 rm -f
$(bindir)/$(target_alias
)-gcc-1
$(exeext
); \
2564 $(LN
) $(bindir)/$(GCC_INSTALL_NAME
)$(exeext
) $(bindir)/$(target_alias
)-gcc-1
$(exeext
); \
2565 mv
$(bindir)/$(target_alias
)-gcc-1
$(exeext
) $(bindir)/$(target_alias
)-gcc
$(exeext
); \
2568 # Install the info files.
2569 # $(INSTALL_DATA) might be a relative pathname, so we can't cd into srcdir
2570 # to do the install.
2571 install-info
: doc
installdirs lang.install-info
2572 -rm -f
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2573 for f in
cpp.
info* gcc.
info*; do \
2574 $(INSTALL_DATA
) $$f $(infodir)/$$f; \
2576 -if
$(SHELL
) -c
'install-info --version' >/dev
/null
2>&1; then \
2577 if
[ -f
$(infodir)/dir ] ; then \
2578 for f in
cpp.
info gcc.
info; do \
2579 install-info
--dir-file
=$(infodir)/dir $(infodir)/$$f; \
2583 -chmod a-x
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2585 # Install the man pages.
2586 install-man
: installdirs $(srcdir)/gcc
.1 $(srcdir)/cccp
.1 lang.install-man
2587 -if
[ -f gcc-cross
$(exeext
) ] ; then \
2588 rm -f
$(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2589 $(INSTALL_DATA
) $(srcdir)/gcc
.1 $(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2590 chmod a-x
$(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2592 rm -f
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2593 $(INSTALL_DATA
) $(srcdir)/gcc
.1 $(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2594 chmod a-x
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2596 -rm -f
$(man1dir)/cccp
$(manext)
2597 -$(INSTALL_DATA
) $(srcdir)/cccp
.1 $(man1dir)/cccp
$(manext)
2598 -chmod a-x
$(man1dir)/cccp
$(manext)
2600 # Install the library.
2601 install-libgcc
: libgcc.a
installdirs
2602 -if
[ -f libgcc.a
] ; then \
2603 rm -f
$(libsubdir
)/libgcc.a
; \
2604 $(INSTALL_DATA
) libgcc.a
$(libsubdir
)/libgcc.a
; \
2605 if
$(RANLIB_TEST_FOR_TARGET
) ; then \
2606 (cd
$(libsubdir
); $(RANLIB_FOR_TARGET
) libgcc.a
); else true
; fi
; \
2607 chmod a-x
$(libsubdir
)/libgcc.a
; \
2610 # Install multiple versions of libgcc.a.
2611 install-multilib
: stmp-multilib
installdirs
2612 for i in
`$(GCC_FOR_TARGET) --print-multi-lib`; do \
2613 dir=`echo $$i | sed -e 's/;.*$$//'`; \
2614 if
[ -d
$(libsubdir
)/$${dir} ]; then true
; else mkdir
$(libsubdir
)/$${dir}; fi
; \
2615 for f in libgcc.a
$(EXTRA_MULTILIB_PARTS
); do \
2616 rm -f
$(libsubdir
)/$${dir}/$${f}; \
2617 $(INSTALL_DATA
) $${dir}/$${f} $(libsubdir
)/$${dir}/$${f}; \
2619 if
$(RANLIB_TEST_FOR_TARGET
); then \
2620 (cd
$(libsubdir
)/$${dir}; $(RANLIB_FOR_TARGET
) libgcc.a
); \
2622 chmod a-x
$(libsubdir
)/$${dir}/libgcc.a
; \
2625 # Install all the header files built in the include subdirectory.
2626 install-headers
: install-include-dir
$(INSTALL_HEADERS_DIR
) $(INSTALL_ASSERT_H
)
2627 # Fix symlinks to absolute paths in the installed include directory to
2628 # point to the installed directory, not the build directory.
2629 # Don't need to use LN_S here since we really do need ln -s and no substitutes.
2630 -files
=`cd $(libsubdir)/include; find . -type l -print 2>/dev/null`; \
2631 if
[ $$?
-eq
0 ]; then \
2632 dir=`cd include; pwd`; \
2633 for i in
$$files; do \
2634 dest
=`ls -ld $(libsubdir)/include/$$i | sed -n 's/.*-> //p'`; \
2635 if expr
"$$dest" : "$$dir.*" > /dev
/null
; then \
2636 rm -f
$(libsubdir
)/include/$$i; \
2637 ln
-s
`echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(libsubdir
)/include/$$i; \
2642 # Create or recreate the gcc private include file directory.
2643 install-include-dir
: installdirs
2644 -rm -rf
$(libsubdir
)/include
2645 mkdir
$(libsubdir
)/include
2646 -chmod a
+rx
$(libsubdir
)/include
2648 # Install the include directory using tar.
2649 install-headers-tar
: stmp-headers
$(STMP_FIXPROTO
) install-include-dir
2650 # We use `pwd`/include instead of just include to problems with CDPATH
2651 # Unless a full pathname is provided, some shells would print the new CWD,
2652 # found in CDPATH, corrupting the output. We could just redirect the
2653 # output of `cd', but some shells lose on redirection within `()'s
2654 (cd
`pwd`/include ; \
2655 tar -cf
- .
; exit
0) |
(cd
$(libsubdir
)/include; tar $(TAROUTOPTS
) - )
2656 # /bin/sh on some systems returns the status of the first tar,
2657 # and that can lose with GNU tar which always writes a full block.
2658 # So use `exit 0' to ignore its exit status.
2660 # Install the include directory using cpio.
2661 install-headers-cpio
: stmp-headers
$(STMP_FIXPROTO
) install-include-dir
2662 # See discussion about the use of `pwd` above
2663 cd
`pwd`/include ; \
2664 find .
-print | cpio
-pdum
$(libsubdir
)/include
2666 # Put assert.h where it won't override GNU libc's assert.h.
2667 # It goes in a dir that is searched after GNU libc's headers;
2668 # thus, the following conditionals are no longer needed.
2669 # But it's not worth deleting them now.
2670 ## Don't replace the assert.h already there if it is not from GCC.
2671 ## This code would be simpler if it tested for -f ... && ! grep ...
2672 ## but supposedly the ! operator is missing in sh on some systems.
2673 install-assert-h
: assert.h
installdirs
2674 if
[ -f
$(assertdir
)/assert.h
]; \
2676 if grep
"__eprintf" $(assertdir
)/assert.h
>/dev
/null
; \
2678 rm -f
$(assertdir
)/assert.h
; \
2679 $(INSTALL_DATA
) $(srcdir)/assert.h
$(assertdir
)/assert.h
; \
2680 chmod a-x
$(assertdir
)/assert.h
; \
2684 rm -f
$(assertdir
)/assert.h
; \
2685 $(INSTALL_DATA
) $(srcdir)/assert.h
$(assertdir
)/assert.h
; \
2686 chmod a-x
$(assertdir
)/assert.h
; \
2689 # Use this target to install the program `collect2' under the name `collect2'.
2690 install-collect2
: collect2
installdirs
2691 $(INSTALL_PROGRAM
) collect2
$(exeext
) $(libsubdir
)/collect2
$(exeext
)
2692 # Install the driver program as $(libsubdir)/gcc for collect2.
2693 $(INSTALL_PROGRAM
) xgcc
$(exeext
) $(libsubdir
)/gcc
$(exeext
)
2695 # Cancel installation by deleting the installed files.
2696 uninstall: intl.
uninstall lang.
uninstall $(UNINSTALL_CPP
)
2697 -rm -rf
$(libsubdir
)
2698 -rm -rf
$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
)
2699 -rm -rf
$(bindir)/$(GCC_CROSS_NAME
)$(exeext
)
2700 -rm -rf
$(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
)
2701 -rm -rf
$(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
)
2702 -rm -rf
$(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
)
2703 -rm -rf
$(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
)
2704 -rm -rf
$(bindir)/$(GCOV_INSTALL_NAME
)$(exeext
)
2705 -rm -rf
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext)
2706 -rm -rf
$(man1dir)/$(GCC_CROSS_NAME
)$(manext)
2707 -rm -rf
$(man1dir)/cccp
$(manext)
2708 -rm -rf
$(man1dir)/protoize
$(manext)
2709 -rm -rf
$(man1dir)/unprotoize
$(manext)
2710 -rm -f
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2712 # These targets are for the dejagnu testsuites. The file site.exp
2713 # contains global variables that all the testsuites will use.
2715 # Set to $(target_alias)/ for cross.
2716 target_subdir
= @target_subdir@
2718 site.exp
: .
/config.status Makefile
2719 @echo
"Making a new config file..."
2722 -@mv site.exp site.bak
2723 @echo
"## these variables are automatically generated by make ##" > .
/tmp0
2724 @echo
"# Do not edit here. If you wish to override these values" >> .
/tmp0
2725 @echo
"# add them to the last section" >> .
/tmp0
2726 @echo
"set rootme \"`pwd`\"" >> .
/tmp0
2727 @echo
"set srcdir \"`cd ${srcdir}; pwd`\"" >> .
/tmp0
2728 @echo
"set host_triplet $(host_canonical)" >> .
/tmp0
2729 @echo
"set build_triplet $(build_canonical)" >> .
/tmp0
2730 @echo
"set target_triplet $(target)" >> .
/tmp0
2731 @echo
"set target_alias $(target_alias)" >> .
/tmp0
2732 # CFLAGS is set even though it's empty to show we reserve the right to set it.
2733 @echo
"set CFLAGS \"\"" >> .
/tmp0
2734 @echo
"set CXXFLAGS \"-I$(objdir)/../$(target_subdir)libio -I\$$srcdir/../libg++/src -I\$$srcdir/../libio -I\$$srcdir/../libstdc++ -I\$$srcdir/../libstdc++/stl -L$(objdir)/../$(target_subdir)libg++ -L$(objdir)/../$(target_subdir)libstdc++\"" >> .
/tmp0
2735 # If newlib has been configured, we need to pass -B to gcc so it can find
2736 # newlib's crt0.o if it exists. This will cause a "path prefix not used"
2737 # message if it doesn't, but the testsuite is supposed to ignore the message -
2738 # it's too difficult to tell when to and when not to pass -B (not all targets
2739 # have crt0's). We could only add the -B if ../newlib/crt0.o exists, but that
2740 # seems like too selective a test.
2741 # ??? Another way to solve this might be to rely on linker scripts. Then
2742 # theoretically the -B won't be needed.
2743 # We also need to pass -L ../ld so that the linker can find ldscripts.
2744 @if
[ -d
$(objdir
)/..
/$(target_subdir
)newlib
] ; then \
2745 echo
"set newlib_cflags \"-I$(objdir)/../$(target_subdir)newlib/targ-include -I\$$srcdir/../newlib/libc/include\"" >> .
/tmp0
; \
2746 echo
"set newlib_ldflags \"-B$(objdir)/../$(target_subdir)newlib/\"" >> .
/tmp0
; \
2747 echo
"append CFLAGS \" \$$newlib_cflags\"" >> .
/tmp0
; \
2748 echo
"append CXXFLAGS \" \$$newlib_cflags\"" >> .
/tmp0
; \
2749 echo
"append LDFLAGS \" \$$newlib_ldflags\"" >> .
/tmp0
; \
2752 @if
[ -d
$(objdir
)/..
/ld ] ; then \
2753 echo
"append LDFLAGS \" -L$(objdir)/../ld\"" >> .
/tmp0
; \
2756 echo
"set tmpdir $(objdir)/testsuite" >> .
/tmp0
2757 @echo
"set srcdir \"\$${srcdir}/testsuite\"" >> .
/tmp0
2758 @echo
"## All variables above are generated by configure. Do Not Edit ##" >> .
/tmp0
2759 @cat .
/tmp0
> site.exp
2760 @cat site.bak | sed \
2761 -e
'1,/^## All variables above are.*##/ d' >> site.exp
2764 CHECK_TARGETS
= check-gcc check-g
++ check-g77 check-objc
2766 check: $(CHECK_TARGETS
)
2768 testsuite
/site.exp
: site.exp
2769 if
[ -d testsuite
]; then \
2774 rm -rf testsuite
/site.exp
2775 cp site.exp testsuite
/site.exp
2777 check-g
++: testsuite
/site.exp
2778 -rootme
=`pwd`; export rootme
; \
2779 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2781 EXPECT
=${EXPECT} ; export EXPECT
; \
2782 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2783 TCL_LIBRARY
=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
2784 export TCL_LIBRARY
; fi
; \
2785 $(RUNTEST
) --tool g
++ $(RUNTESTFLAGS
)
2787 check-gcc
: testsuite
/site.exp
2788 -rootme
=`pwd`; export rootme
; \
2789 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2791 EXPECT
=${EXPECT} ; export EXPECT
; \
2792 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2793 TCL_LIBRARY
=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
2794 export TCL_LIBRARY
; fi
; \
2795 $(RUNTEST
) --tool gcc
$(RUNTESTFLAGS
)
2797 check-g77
: testsuite
/site.exp
2798 -rootme
=`pwd`; export rootme
; \
2799 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2801 EXPECT
=${EXPECT} ; export EXPECT
; \
2802 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2803 TCL_LIBRARY
=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
2804 export TCL_LIBRARY
; fi
; \
2805 $(RUNTEST
) --tool g77
$(RUNTESTFLAGS
)
2807 check-objc
: testsuite
/site.exp
2808 -rootme
=`pwd`; export rootme
; \
2809 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2811 EXPECT
=${EXPECT} ; export EXPECT
; \
2812 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2813 TCL_LIBRARY
=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
2814 export TCL_LIBRARY
; fi
; \
2815 $(RUNTEST
) --tool objc
$(RUNTESTFLAGS
)
2817 # These exist for maintenance purposes.
2819 # Update the tags table.
2823 mv
-f c-parse.
[ch
] cexp.c
=*.
[chy
] tmp-tags
; \
2824 etags
*.y
*.h
*.c
; \
2828 # Create the distribution tar.gz file.
2830 gzip
--best
< tmp-gcc.xtar
> tmp-gcc.xtar.gz
2831 mv tmp-gcc.xtar.gz gcc-
$(version
).
tar.gz
2833 tmp-gcc.xtar
: distdir
2834 # Make the distribution.
2835 tar -chf tmp-gcc.xtar gcc-
$(version
)
2838 if
[ -d
$(srcdir)/CVS
]; then cd
$(srcdir) && cvs
-r update
; fi
2840 # This target exists to do the initial work before the language specific
2842 distdir-start
: doc
$(srcdir)/INSTALL
$(srcdir)/c-parse.y
$(srcdir)/c-gperf.h \
2843 $(srcdir)/c-parse.c
$(srcdir)/cexp.c
$(srcdir)/config.in \
2844 $(srcdir)/version.c TAGS
2845 @case
'$(USE_NLS)' in \
2847 *) echo
"configure with --enable-nls before making a distribution"; \
2850 @if grep
-s
"for version ${mainversion}" gcc.texi
> /dev
/null
; \
2852 else echo
"You must update the version number in \`gcc.texi'"; sleep
10;\
2854 # Update the version number in README
2855 $(AWK
) '$$1 " " $$2 " " $$3 == "This directory contains" \
2856 { $$6 = version; print $$0 } \
2857 $$1 " " $$2 " " $$3 != "This directory contains"' \
2858 version
=$(version
) $(srcdir)/README
> tmp.README
2859 mv tmp.README README
2860 -rm -rf gcc-
$(version
) tmp
2861 # Put all the files in a temporary subdirectory
2862 # which has the name that we want to have in the tar file.
2869 for file in
`(cd $(srcdir) && echo *[0-9a-zA-Z+])`; do \
2870 test -f
$(srcdir)/$$file && $(LN_S
) $(srcdir)/$$file tmp
; \
2872 if
test "$(srcdir)" != "." ; then \
2873 for file in c-parse.c cexp.c
; do \
2874 test -f .
/$$file && $(LN_S
) ..
/$$file tmp
; \
2877 for file in
`(cd $(srcdir)/config && echo *[0-9a-zA-Z+])`; do \
2878 if
test -d
$(srcdir)/config
/$$file \
2879 && test "$$file" != RCS
&& test "$$file" != CVS
; then \
2880 mkdir tmp
/config
/$$file; \
2881 for subfile in
`(cd $(srcdir)/config/$$file && echo *[0-9a-zA-Z+])`; do \
2882 $(LN_S
) $(srcdir)/config
/$$file/$$subfile tmp
/config
/$$file; \
2885 $(LN_S
) $(srcdir)/config
/$$file tmp
/config
; \
2888 for file in
`(cd $(srcdir)/ginclude && echo *[0-9a-zA-Z+])`; do \
2889 $(LN_S
) $(srcdir)/ginclude
/$$file tmp
/ginclude
; \
2891 for file in
`(cd $(srcdir)/objc && echo *[0-9a-zA-Z+])`; do \
2892 $(LN_S
) $(srcdir)/objc
/$$file tmp
/objc
; \
2894 $(LN_S
) .gdbinit tmp
2896 # Finish making `distdir', after the languages have done their thing.
2898 mv tmp gcc-
$(version
)
2899 # Get rid of everything we don't want in the distribution. We'd want
2900 # this to use Makefile.in, but it doesn't have the `lang.foo' targets
2902 cd gcc-
$(version
); make extraclean distdir-check VERSION_DEP
=
2905 ($(AWK
) '/^[^#]/{print} /^#[A-Za-z]/{print substr($$1, 2)}' |
sort) \
2906 < po
/POTFILES.in
> tmp.POTFILES
2907 ls
[A-Za-z
]*.
[ch
] [a-z
]*/[A-Za-z
]*.
[ch
] \
2908 [a-z
]*/[a-z
]*/[A-Za-z
]*.
[ch
] |
sort > tmp.src
2909 diff tmp.POTFILES tmp.src ||
{ \
2910 echo
"po/POTFILES.in and sources do not match -- please fix"; \
2915 distdir
: distdir-cvs distdir-start intl.distdir intl.distdir-fixup \
2916 lang.distdir distdir-finish
2918 # make diff oldversion=M.N
2919 # creates a diff file between an older distribution and this one.
2920 # The -P option assumes this is GNU diff.
2922 diff
-rc2P
-x c-parse.y
-x c-parse.c
-x c-parse.h
-x c-gperf.h \
2923 -x cexp.c
-x
-x TAGS
-x INSTALL \
2924 -x configure
-x config.in \
2925 -x
"gcc.??" -x
"gcc.??s" -x gcc.aux
-x
"gcc.info*" \
2926 -x
"cpp.??" -x
"cpp.??s" -x
cpp.aux
-x
"cpp.info*" \
2927 $(LANG_DIFF_EXCLUDES
) \
2928 gcc-
$(oldversion
) gcc-
$(version
) > gcc-
$(oldversion
)-$(version
).diff
2930 bootstrap bootstrap-lean
: force
2931 # Only build the C compiler for stage1, because that is the only one that
2932 # we can guarantee will build with the native compiler, and also it is the
2933 # only thing useful for building stage2.
2934 $(MAKE
) CC
="$(CC)" libdir=$(libdir) LANGUAGES
="$(BOOT_LANGUAGES)"
2936 # This used to define ALLOCA as empty, but that would lead to bad results
2937 # for a subsequent `make install' since that would not have ALLOCA empty.
2938 # To prevent `make install' from compiling alloca.o and then relinking cc1
2939 # because alloca.o is newer, we permit these recursive makes to compile
2940 # alloca.o. Then cc1 is newer, so it won't have to be relinked.
2941 $(MAKE
) CC
="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage1
/ LANGUAGES
="$(LANGUAGES)"
2943 -if
test $@
= bootstrap-lean
; then
rm -rf stage1
; else true
; fi
2944 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2946 bootstrap2 bootstrap2-lean
: force
2947 $(MAKE
) CC
="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage1
/ LANGUAGES
="$(LANGUAGES)"
2949 -if
test $@
= bootstrap2-lean
; then
rm -rf stage1
; else true
; fi
2950 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2952 bootstrap3 bootstrap3-lean
: force
2953 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2955 bootstrap4 bootstrap4-lean
: force
2956 $(MAKE
) CC
="stage3/xgcc$(exeext) -Bstage3/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage3
/ LANGUAGES
="$(LANGUAGES)"
2958 # Compare the object files in the current directory with those in the
2961 # ./ avoids bug in some versions of tail.
2962 compare compare3 compare4 compare-lean compare3-lean compare4-lean
: force
2964 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2965 for file in
*$(objext
); do \
2966 tail
+16c .
/$$file > tmp-foo1
; \
2967 tail
+16c stage
$$stage/$$file > tmp-foo2 \
2968 && (cmp tmp-foo1 tmp-foo2
> /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2970 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2971 for
dir in tmp-foo intl
$(SUBDIRS
); do \
2972 if
[ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2973 for file in
$$dir/*$(objext
); do \
2974 tail
+16c .
/$$file > tmp-foo1
; \
2975 tail
+16c stage
$$stage/$$file > tmp-foo2 \
2976 && (cmp tmp-foo1 tmp-foo2
> /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2981 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2982 if
[ -f .bad_compare
]; then \
2983 echo
"Bootstrap comparison failure!"; \
2988 *-lean
) rm -rf stage
$$stage ;; \
2993 # Compare the object files in the current directory with those in the
2994 # stage2 directory. Use gnu cmp (diffutils v2.4 or later) to avoid
2995 # running tail and the overhead of twice copying each object file.
2997 gnucompare gnucompare3 gnucompare4 gnucompare-lean gnucompare3-lean gnucompare4-lean
: force
2999 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
3000 for file in
*$(objext
); do \
3001 (cmp
--ignore-initial
=16 $$file stage
$$stage/$$file > /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
3003 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
3004 for
dir in tmp-foo intl
$(SUBDIRS
); do \
3005 if
[ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
3006 for file in
$$dir/*$(objext
); do \
3007 (cmp
--ignore-initial
=16 $$file stage
$$stage/$$file > /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
3011 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
3012 if
[ -f .bad_compare
]; then \
3013 echo
"Bootstrap comparison failure!"; \
3018 *-lean
) rm -rf stage
$$stage ;; \
3022 # Copy the object files from a particular stage into a subdirectory.
3024 -if
[ -d stage1
] ; then true
; else mkdir stage1
; fi
3025 -for
dir in intl
$(SUBDIRS
) ; \
3027 if
[ -d stage1
/$$dir ] ; then true
; else mkdir stage1
/$$dir ; fi
; \
3029 -mv
$(STAGESTUFF
) stage1
3030 -mv intl
/*$(objext
) stage1
/intl
3031 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3032 # dir will work properly.
3033 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage1
; else true
; fi
3034 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage1
; else true
; fi
3035 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage1
; else true
; fi
3036 -rm -f stage1
/libgcc.a
3038 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3039 $(RANLIB_FOR_TARGET
) stage1
/libgcc.a
; \
3041 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3042 cp stage1
/$${f} .
; \
3045 stage1
: force stage1-start lang.stage1
3048 -if
[ -d stage2
] ; then true
; else mkdir stage2
; fi
3049 -for
dir in intl
$(SUBDIRS
) ; \
3051 if
[ -d stage2
/$$dir ] ; then true
; else mkdir stage2
/$$dir ; fi
; \
3053 -mv
$(STAGESTUFF
) stage2
3054 -mv intl
/*$(objext
) stage2
/intl
3055 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3056 # dir will work properly.
3057 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage2
; else true
; fi
3058 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage2
; else true
; fi
3059 -if
[ -f collect-ld
] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage2
; else true
; fi
3060 -rm -f stage2
/libgcc.a
3062 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3063 $(RANLIB_FOR_TARGET
) stage2
/libgcc.a
; \
3065 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3066 cp stage2
/$${f} .
; \
3069 stage2
: force stage2-start lang.stage2
3072 -if
[ -d stage3
] ; then true
; else mkdir stage3
; fi
3073 -for
dir in intl
$(SUBDIRS
) ; \
3075 if
[ -d stage3
/$$dir ] ; then true
; else mkdir stage3
/$$dir ; fi
; \
3077 -mv
$(STAGESTUFF
) stage3
3078 -mv intl
/*$(objext
) stage3
/intl
3079 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3080 # dir will work properly.
3081 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage3
; else true
; fi
3082 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage3
; else true
; fi
3083 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage3
; else true
; fi
3084 -rm -f stage3
/libgcc.a
3086 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3087 $(RANLIB_FOR_TARGET
) stage3
/libgcc.a
; \
3089 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3090 cp stage3
/$${f} .
; \
3093 stage3
: force stage3-start lang.stage3
3096 -if
[ -d stage4
] ; then true
; else mkdir stage4
; fi
3097 -for
dir in intl
$(SUBDIRS
) ; \
3099 if
[ -d stage4
/$$dir ] ; then true
; else mkdir stage4
/$$dir ; fi
; \
3101 -mv
$(STAGESTUFF
) stage4
3102 -mv intl
/*$(objext
) stage4
/intl
3103 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3104 # dir will work properly.
3105 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage4
; else true
; fi
3106 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage4
; else true
; fi
3107 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage4
; else true
; fi
3108 -rm -f stage4
/libgcc.a
3110 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3111 $(RANLIB_FOR_TARGET
) stage4
/libgcc.a
; \
3113 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3114 cp stage4
/$${f} .
; \
3117 stage4
: force stage4-start lang.stage4
3119 # Copy just the executable files from a particular stage into a subdirectory,
3120 # and delete the object files. Use this if you're just verifying a version
3121 # that is pretty sure to work, and you are short of disk space.
3122 risky-stage1
: stage1
3125 risky-stage2
: stage2
3128 risky-stage3
: stage3
3131 risky-stage4
: stage4
3134 #In GNU Make, ignore whether `stage*' exists.
3135 .PHONY
: stage1 stage2 stage3 stage4
clean maintainer-clean TAGS bootstrap
3136 .PHONY
: risky-stage1 risky-stage2 risky-stage3 risky-stage4
3141 # The enquire rules are still useful for building new float-anything.h.
3142 # Special flags for compiling enquire.
3143 # We disable optimization to make floating point more reliable.
3144 ENQUIRE_CFLAGS
= -DNO_MEM
-DNO_LONG_DOUBLE_IO
-O0
3145 ENQUIRE_LDFLAGS
= $(LDFLAGS
)
3147 # Enquire target (This is a variable so that a target can choose not to
3151 # Test to see whether <float.h> exists in the system header files,
3152 # and is not derived from GCC.
3154 [ -f
$(SYSTEM_HEADER_DIR
)/float.h
] && \
3155 if grep
'ifndef _FLOAT_H___' $(SYSTEM_HEADER_DIR
)/float.h
>/dev
/null
; \
3158 # We pretend to not having a usable <float.h>, hence disable the FLOAT_H_TEST
3159 # to ensure, we're emitting a full blown <float.h> ourselves.
3160 FLOAT_H_TEST
= false
3162 # Used to compile enquire with standard cc, but have forgotten why.
3163 # Let's try with GCC.
3164 enquire
: enquire.o
$(GCC_PARTS
)
3165 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ENQUIRE_LDFLAGS
) enquire.o
-o
$@
3166 enquire.o
: $(srcdir)/enquire.c
$(GCC_PASSES
) stmp-int-hdrs
3167 if
$(FLOAT_H_TEST
); then \
3168 rm -f
include/float.h
; \
3169 SYS_FLOAT_H_WRAP
=1; \
3171 SYS_FLOAT_H_WRAP
=0; \
3173 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) $(ENQUIRE_CFLAGS
) \
3174 -DSYS_FLOAT_H_WRAP
=$$SYS_FLOAT_H_WRAP \
3175 -I.
-c
$(srcdir)/enquire.c
3177 # Create float.h source for the native machine.
3178 # Make it empty if we can use the system float.h without changes.
3179 float.h-nat
: enquire
3180 -.
/enquire
-f
> tmp-float.h
3181 grep
'#define [^_]' tmp-float.h
>/dev
/null || true
> tmp-float.h
3182 mv tmp-float.h float.h-nat
3184 # Create a dummy float.h source for a cross-compiler.
3185 # ??? This isn't used anymore. Should we create config/float-unkn.h
3186 # and make that the default float_format in configure?
3188 echo
"#ifndef __GCC_FLOAT_NOT_NEEDED" > t-float.h-cross
3189 echo
"#error float.h values not known for cross-compiler" >> t-float.h-cross
3190 echo
"#endif" >> t-float.h-cross
3191 mv t-float.h-cross float.h-cross