gcc/reload.h

   1 /* Communication between reload.c and reload1.c.
   2    Copyright (C) 1987, 1991, 1992, 1993, 1994, 1995, 1997, 1998,
   3    1999, 2000 Free Software Foundation, Inc.
   4
   5 This file is part of GNU CC.
   6
   7 GNU CC is free software; you can redistribute it and/or modify
   8 it under the terms of the GNU General Public License as published by
   9 the Free Software Foundation; either version 2, or (at your option)
  10 any later version.
  11
  12 GNU CC is distributed in the hope that it will be useful,
  13 but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 GNU General Public License for more details.
  16
  17 You should have received a copy of the GNU General Public License
  18 along with GNU CC; see the file COPYING.  If not, write to
  19 the Free Software Foundation, 59 Temple Place - Suite 330,
  20 Boston, MA 02111-1307, USA.  */
  21
  22
  23 /* If secondary reloads are the same for inputs and outputs, define those
  24    macros here.  */
  25
  26 #ifdef SECONDARY_RELOAD_CLASS
  27 #define SECONDARY_INPUT_RELOAD_CLASS(CLASS, MODE, X) \
  28   SECONDARY_RELOAD_CLASS (CLASS, MODE, X)
  29 #define SECONDARY_OUTPUT_RELOAD_CLASS(CLASS, MODE, X) \
  30   SECONDARY_RELOAD_CLASS (CLASS, MODE, X)
  31 #endif
  32
  33 /* If either macro is defined, show that we need secondary reloads.  */
  34 #if defined(SECONDARY_INPUT_RELOAD_CLASS) || defined(SECONDARY_OUTPUT_RELOAD_CLASS)
  35 #define HAVE_SECONDARY_RELOADS
  36 #endif
  37
  38 /* If MEMORY_MOVE_COST isn't defined, give it a default here.  */
  39 #ifndef MEMORY_MOVE_COST
  40 #ifdef HAVE_SECONDARY_RELOADS
  41 #define MEMORY_MOVE_COST(MODE,CLASS,IN) \
  42   (4 + memory_move_secondary_cost ((MODE), (CLASS), (IN)))
  43 #else
  44 #define MEMORY_MOVE_COST(MODE,CLASS,IN) 4
  45 #endif
  46 #endif
  47 extern int memory_move_secondary_cost PARAMS ((enum machine_mode, enum reg_class, int));
  48
  49 /* Maximum number of reloads we can need.  */
  50 #define MAX_RELOADS (2 * MAX_RECOG_OPERANDS * (MAX_REGS_PER_ADDRESS + 1))
  51
  52 /* Encode the usage of a reload.  The following codes are supported:
  53
  54    RELOAD_FOR_INPUT             reload of an input operand
  55    RELOAD_FOR_OUTPUT            likewise, for output
  56    RELOAD_FOR_INSN              a reload that must not conflict with anything
  57                                 used in the insn, but may conflict with
  58                                 something used before or after the insn
  59    RELOAD_FOR_INPUT_ADDRESS     reload for parts of the address of an object
  60                                 that is an input reload
  61    RELOAD_FOR_INPADDR_ADDRESS   reload needed for RELOAD_FOR_INPUT_ADDRESS
  62    RELOAD_FOR_OUTPUT_ADDRESS    like RELOAD_FOR INPUT_ADDRESS, for output
  63    RELOAD_FOR_OUTADDR_ADDRESS   reload needed for RELOAD_FOR_OUTPUT_ADDRESS
  64    RELOAD_FOR_OPERAND_ADDRESS   reload for the address of a non-reloaded
  65                                 operand; these don't conflict with
  66                                 any other addresses.
  67    RELOAD_FOR_OPADDR_ADDR       reload needed for RELOAD_FOR_OPERAND_ADDRESS
  68                                 reloads; usually secondary reloads
  69    RELOAD_OTHER                 none of the above, usually multiple uses
  70    RELOAD_FOR_OTHER_ADDRESS     reload for part of the address of an input
  71                                 that is marked RELOAD_OTHER.
  72
  73    This used to be "enum reload_when_needed" but some debuggers have trouble
  74    with an enum tag and variable of the same name.  */
  75
  76 enum reload_type
  77 {
  78   RELOAD_FOR_INPUT, RELOAD_FOR_OUTPUT, RELOAD_FOR_INSN,
  79   RELOAD_FOR_INPUT_ADDRESS, RELOAD_FOR_INPADDR_ADDRESS,
  80   RELOAD_FOR_OUTPUT_ADDRESS, RELOAD_FOR_OUTADDR_ADDRESS,
  81   RELOAD_FOR_OPERAND_ADDRESS, RELOAD_FOR_OPADDR_ADDR,
  82   RELOAD_OTHER, RELOAD_FOR_OTHER_ADDRESS
  83 };
  84
  85 #ifdef MAX_INSN_CODE
  86 /* Each reload is recorded with a structure like this.  */
  87 struct reload
  88 {
  89   /* The value to reload from */
  90   rtx in;
  91   /* Where to store reload-reg afterward if nec (often the same as
  92      reload_in)  */
  93   rtx out;
  94
  95   /* The class of registers to reload into.  */
  96   enum reg_class class;
  97
  98   /* The mode this operand should have when reloaded, on input.  */
  99   enum machine_mode inmode;
 100   /* The mode this operand should have when reloaded, on output.  */
 101   enum machine_mode outmode;
 102
 103   /* The mode of the reload register.  */
 104   enum machine_mode mode;
 105
 106   /* the largest number of registers this reload will require.  */
 107   unsigned int nregs;
 108
 109   /* Positive amount to increment or decrement by if
 110      reload_in is a PRE_DEC, PRE_INC, POST_DEC, POST_INC.
 111      Ignored otherwise (don't assume it is zero).  */
 112   int inc;
 113   /* A reg for which reload_in is the equivalent.
 114      If reload_in is a symbol_ref which came from
 115      reg_equiv_constant, then this is the pseudo
 116      which has that symbol_ref as equivalent.  */
 117   rtx in_reg;
 118   rtx out_reg;
 119
 120   /* Used in find_reload_regs to record the allocated register.  */
 121   int regno;
 122   /* This is the register to reload into.  If it is zero when `find_reloads'
 123      returns, you must find a suitable register in the class specified by
 124      reload_reg_class, and store here an rtx for that register with mode from
 125      reload_inmode or reload_outmode.  */
 126   rtx reg_rtx;
 127   /* The operand number being reloaded.  This is used to group related reloads
 128      and need not always be equal to the actual operand number in the insn,
 129      though it current will be; for in-out operands, it is one of the two
 130      operand numbers.  */
 131   int opnum;
 132
 133   /* Gives the reload number of a secondary input reload, when needed;
 134      otherwise -1.  */
 135   int secondary_in_reload;
 136   /* Gives the reload number of a secondary output reload, when needed;
 137      otherwise -1.  */
 138   int secondary_out_reload;
 139   /* If a secondary input reload is required, gives the INSN_CODE that uses the
 140      secondary reload as a scratch register, or CODE_FOR_nothing if the
 141      secondary reload register is to be an intermediate register.  */
 142   enum insn_code secondary_in_icode;
 143   /* Likewise, for a secondary output reload.  */
 144   enum insn_code secondary_out_icode;
 145
 146   /* Classifies reload as needed either for addressing an input reload,
 147      addressing an output, for addressing a non-reloaded mem ref, or for
 148      unspecified purposes (i.e., more than one of the above).  */
 149   enum reload_type when_needed;
 150
 151   /* Nonzero for an optional reload.  Optional reloads are ignored unless the
 152      value is already sitting in a register.  */
 153   unsigned int optional:1;
 154   /* nonzero if this reload shouldn't be combined with another reload.  */
 155   unsigned int nocombine:1;
 156   /* Nonzero if this is a secondary register for one or more reloads.  */
 157   unsigned int secondary_p:1;
 158   /* Nonzero if this reload must use a register not already allocated to a
 159      group.  */
 160   unsigned int nongroup:1;
 161 };
 162
 163 extern struct reload rld[MAX_RELOADS];
 164 extern int n_reloads;
 165 #endif
 166
 167 extern rtx *reg_equiv_constant;
 168 extern rtx *reg_equiv_memory_loc;
 169 extern rtx *reg_equiv_address;
 170 extern rtx *reg_equiv_mem;
 171
 172 /* All the "earlyclobber" operands of the current insn
 173    are recorded here.  */
 174 extern int n_earlyclobbers;
 175 extern rtx reload_earlyclobbers[MAX_RECOG_OPERANDS];
 176
 177 /* Save the number of operands.  */
 178 extern int reload_n_operands;
 179
 180 /* First uid used by insns created by reload in this function.
 181    Used in find_equiv_reg.  */
 182 extern int reload_first_uid;
 183
 184 /* Nonzero if indirect addressing is supported when the innermost MEM is
 185    of the form (MEM (SYMBOL_REF sym)).  It is assumed that the level to
 186    which these are valid is the same as spill_indirect_levels, above.   */
 187
 188 extern char indirect_symref_ok;
 189
 190 /* Nonzero if an address (plus (reg frame_pointer) (reg ...)) is valid.  */
 191 extern char double_reg_address_ok;
 192
 193 extern int num_not_at_initial_offset;
 194
 195 #ifdef MAX_INSN_CODE
 196 /* These arrays record the insn_code of insns that may be needed to
 197    perform input and output reloads of special objects.  They provide a
 198    place to pass a scratch register.  */
 199 extern enum insn_code reload_in_optab[];
 200 extern enum insn_code reload_out_optab[];
 201 #endif
 202
 203 struct needs
 204 {
 205   /* [0] is normal, [1] is nongroup.  */
 206   short regs[2][N_REG_CLASSES];
 207   short groups[N_REG_CLASSES];
 208 };
 209
 210 #if defined SET_HARD_REG_BIT && defined CLEAR_REG_SET
 211 /* This structure describes instructions which are relevant for reload.
 212    Apart from all regular insns, this also includes CODE_LABELs, since they
 213    must be examined for register elimination.  */
 214 struct insn_chain
 215 {
 216   /* Links to the neighbour instructions.  */
 217   struct insn_chain *next, *prev;
 218
 219   /* Link through a chains set up by calculate_needs_all_insns, containing
 220      all insns that need reloading.  */
 221   struct insn_chain *next_need_reload;
 222
 223   /* The basic block this insn is in.  */
 224   int block;
 225   /* The rtx of the insn.  */
 226   rtx insn;
 227   /* Register life information: record all live hard registers, and all
 228      live pseudos that have a hard register.  */
 229   regset_head live_throughout;
 230   regset_head dead_or_set;
 231
 232   /* Copies of the global variables computed by find_reloads.  */
 233   struct reload *rld;
 234   int n_reloads;
 235
 236   /* Indicates which registers have already been used for spills.  */
 237   HARD_REG_SET used_spill_regs;
 238
 239   /* Describe the needs for reload registers of this insn.  */
 240   struct needs need;
 241
 242   /* Nonzero if find_reloads said the insn requires reloading.  */
 243   unsigned int need_reload:1;
 244   /* Nonzero if find_reloads needs to be run during reload_as_needed to
 245      perform modifications on any operands.  */
 246   unsigned int need_operand_change:1;
 247   /* Nonzero if eliminate_regs_in_insn said it requires eliminations.  */
 248   unsigned int need_elim:1;
 249   /* Nonzero if this insn was inserted by perform_caller_saves.  */
 250   unsigned int is_caller_save_insn:1;
 251 };
 252
 253 /* A chain of insn_chain structures to describe all non-note insns in
 254    a function.  */
 255 extern struct insn_chain *reload_insn_chain;
 256
 257 /* Allocate a new insn_chain structure.  */
 258 extern struct insn_chain *new_insn_chain        PARAMS ((void));
 259
 260 extern void compute_use_by_pseudos              PARAMS ((HARD_REG_SET *, regset));
 261 #endif
 262
 263 /* Functions from reload.c:  */
 264
 265 /* Return a memory location that will be used to copy X in mode MODE.
 266    If we haven't already made a location for this mode in this insn,
 267    call find_reloads_address on the location being returned.  */
 268 extern rtx get_secondary_mem PARAMS ((rtx, enum machine_mode,
 269                                     int, enum reload_type));
 270
 271 /* Clear any secondary memory locations we've made.  */
 272 extern void clear_secondary_mem PARAMS ((void));
 273
 274 /* Transfer all replacements that used to be in reload FROM to be in
 275    reload TO.  */
 276 extern void transfer_replacements PARAMS ((int, int));
 277
 278 /* IN_RTX is the value loaded by a reload that we now decided to inherit,
 279    or a subpart of it.  If we have any replacements registered for IN_RTX,
 280    chancel the reloads that were supposed to load them.
 281    Return non-zero if we chanceled any reloads.  */
 282 extern int remove_address_replacements PARAMS ((rtx in_rtx));
 283
 284 /* Like rtx_equal_p except that it allows a REG and a SUBREG to match
 285    if they are the same hard reg, and has special hacks for
 286    autoincrement and autodecrement.  */
 287 extern int operands_match_p PARAMS ((rtx, rtx));
 288
 289 /* Return 1 if altering OP will not modify the value of CLOBBER. */
 290 extern int safe_from_earlyclobber PARAMS ((rtx, rtx));
 291
 292 /* Search the body of INSN for values that need reloading and record them
 293    with push_reload.  REPLACE nonzero means record also where the values occur
 294    so that subst_reloads can be used.  */
 295 extern int find_reloads PARAMS ((rtx, int, int, int, short *));
 296
 297 /* Compute the sum of X and Y, making canonicalizations assumed in an
 298    address, namely: sum constant integers, surround the sum of two
 299    constants with a CONST, put the constant as the second operand, and
 300    group the constant on the outermost sum.  */
 301 extern rtx form_sum PARAMS ((rtx, rtx));
 302
 303 /* Substitute into the current INSN the registers into which we have reloaded
 304    the things that need reloading.  */
 305 extern void subst_reloads PARAMS ((void));
 306
 307 /* Make a copy of any replacements being done into X and move those copies
 308    to locations in Y, a copy of X.  We only look at the highest level of
 309    the RTL.  */
 310 extern void copy_replacements PARAMS ((rtx, rtx));
 311
 312 /* Change any replacements being done to *X to be done to *Y */
 313 extern void move_replacements PARAMS ((rtx *x, rtx *y));
 314
 315 /* If LOC was scheduled to be replaced by something, return the replacement.
 316    Otherwise, return *LOC.  */
 317 extern rtx find_replacement PARAMS ((rtx *));
 318
 319 /* Return nonzero if register in range [REGNO, ENDREGNO)
 320    appears either explicitly or implicitly in X
 321    other than being stored into.  */
 322 extern int refers_to_regno_for_reload_p PARAMS ((unsigned int, unsigned int,
 323                                                  rtx, rtx *));
 324
 325 /* Nonzero if modifying X will affect IN.  */
 326 extern int reg_overlap_mentioned_for_reload_p PARAMS ((rtx, rtx));
 327
 328 /* Return nonzero if anything in X contains a MEM.  Look also for pseudo
 329    registers.  */
 330 extern int refers_to_mem_for_reload_p PARAMS ((rtx));
 331
 332 /* Check the insns before INSN to see if there is a suitable register
 333    containing the same value as GOAL.  */
 334 extern rtx find_equiv_reg PARAMS ((rtx, rtx, enum reg_class, int, short *,
 335                                  int, enum machine_mode));
 336
 337 /* Return 1 if register REGNO is the subject of a clobber in insn INSN.  */
 338 extern int regno_clobbered_p PARAMS ((unsigned int, rtx));
 339
 340 /* Return 1 if X is an operand of an insn that is being earlyclobbered.  */
 341 int earlyclobber_operand_p PARAMS ((rtx));
 342
 343 /* Functions in reload1.c:  */
 344
 345 extern int reloads_conflict             PARAMS ((int, int));
 346
 347 /* Initialize the reload pass once per compilation.  */
 348 extern void init_reload PARAMS ((void));
 349
 350 /* The reload pass itself.  */
 351 extern int reload PARAMS ((rtx, int, FILE *));
 352
 353 /* Mark the slots in regs_ever_live for the hard regs
 354    used by pseudo-reg number REGNO.  */
 355 extern void mark_home_live PARAMS ((int));
 356
 357 /* Scan X and replace any eliminable registers (such as fp) with a
 358    replacement (such as sp), plus an offset.  */
 359 extern rtx eliminate_regs PARAMS ((rtx, enum machine_mode, rtx));
 360
 361 /* Emit code to perform a reload from IN (which may be a reload register) to
 362    OUT (which may also be a reload register).  IN or OUT is from operand
 363    OPNUM with reload type TYPE.  */
 364 extern rtx gen_reload PARAMS ((rtx, rtx, int, enum reload_type));
 365
 366 /* Deallocate the reload register used by reload number R.  */
 367 extern void deallocate_reload_reg PARAMS ((int r));
 368
 369 /* Functions in caller-save.c:  */
 370
 371 /* Initialize for caller-save.  */
 372 extern void init_caller_save PARAMS ((void));
 373
 374 /* Initialize save areas by showing that we haven't allocated any yet.  */
 375 extern void init_save_areas PARAMS ((void));
 376
 377 /* Allocate save areas for any hard registers that might need saving.  */
 378 extern void setup_save_areas PARAMS ((void));
 379
 380 /* Find the places where hard regs are live across calls and save them.  */
 381 extern void save_call_clobbered_regs PARAMS ((void));
 382
 383 /* Replace (subreg (reg)) with the appropriate (reg) for any operands.  */
 384 extern void cleanup_subreg_operands PARAMS ((rtx));