1 /* Register to Stack convert for GNU compiler.
2 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998,
3 1999, 2000, 2001 Free Software Foundation, Inc.
5 This file is part of GNU CC.
7 GNU CC is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2, or (at your option)
12 GNU CC is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with GNU CC; see the file COPYING. If not, write to
19 the Free Software Foundation, 59 Temple Place - Suite 330,
20 Boston, MA 02111-1307, USA. */
22 /* This pass converts stack-like registers from the "flat register
23 file" model that gcc uses, to a stack convention that the 387 uses.
25 * The form of the input:
27 On input, the function consists of insn that have had their
28 registers fully allocated to a set of "virtual" registers. Note that
29 the word "virtual" is used differently here than elsewhere in gcc: for
30 each virtual stack reg, there is a hard reg, but the mapping between
31 them is not known until this pass is run. On output, hard register
32 numbers have been substituted, and various pop and exchange insns have
33 been emitted. The hard register numbers and the virtual register
34 numbers completely overlap - before this pass, all stack register
35 numbers are virtual, and afterward they are all hard.
37 The virtual registers can be manipulated normally by gcc, and their
38 semantics are the same as for normal registers. After the hard
39 register numbers are substituted, the semantics of an insn containing
40 stack-like regs are not the same as for an insn with normal regs: for
41 instance, it is not safe to delete an insn that appears to be a no-op
42 move. In general, no insn containing hard regs should be changed
43 after this pass is done.
45 * The form of the output:
47 After this pass, hard register numbers represent the distance from
48 the current top of stack to the desired register. A reference to
49 FIRST_STACK_REG references the top of stack, FIRST_STACK_REG + 1,
50 represents the register just below that, and so forth. Also, REG_DEAD
51 notes indicate whether or not a stack register should be popped.
53 A "swap" insn looks like a parallel of two patterns, where each
54 pattern is a SET: one sets A to B, the other B to A.
56 A "push" or "load" insn is a SET whose SET_DEST is FIRST_STACK_REG
57 and whose SET_DEST is REG or MEM. Any other SET_DEST, such as PLUS,
58 will replace the existing stack top, not push a new value.
60 A store insn is a SET whose SET_DEST is FIRST_STACK_REG, and whose
61 SET_SRC is REG or MEM.
63 The case where the SET_SRC and SET_DEST are both FIRST_STACK_REG
64 appears ambiguous. As a special case, the presence of a REG_DEAD note
65 for FIRST_STACK_REG differentiates between a load insn and a pop.
67 If a REG_DEAD is present, the insn represents a "pop" that discards
68 the top of the register stack. If there is no REG_DEAD note, then the
69 insn represents a "dup" or a push of the current top of stack onto the
74 Existing REG_DEAD and REG_UNUSED notes for stack registers are
75 deleted and recreated from scratch. REG_DEAD is never created for a
76 SET_DEST, only REG_UNUSED.
80 There are several rules on the usage of stack-like regs in
81 asm_operands insns. These rules apply only to the operands that are
84 1. Given a set of input regs that die in an asm_operands, it is
85 necessary to know which are implicitly popped by the asm, and
86 which must be explicitly popped by gcc.
88 An input reg that is implicitly popped by the asm must be
89 explicitly clobbered, unless it is constrained to match an
92 2. For any input reg that is implicitly popped by an asm, it is
93 necessary to know how to adjust the stack to compensate for the pop.
94 If any non-popped input is closer to the top of the reg-stack than
95 the implicitly popped reg, it would not be possible to know what the
96 stack looked like - it's not clear how the rest of the stack "slides
99 All implicitly popped input regs must be closer to the top of
100 the reg-stack than any input that is not implicitly popped.
102 3. It is possible that if an input dies in an insn, reload might
103 use the input reg for an output reload. Consider this example:
105 asm ("foo" : "=t" (a) : "f" (b));
107 This asm says that input B is not popped by the asm, and that
108 the asm pushes a result onto the reg-stack, ie, the stack is one
109 deeper after the asm than it was before. But, it is possible that
110 reload will think that it can use the same reg for both the input and
111 the output, if input B dies in this insn.
113 If any input operand uses the "f" constraint, all output reg
114 constraints must use the "&" earlyclobber.
116 The asm above would be written as
118 asm ("foo" : "=&t" (a) : "f" (b));
120 4. Some operands need to be in particular places on the stack. All
121 output operands fall in this category - there is no other way to
122 know which regs the outputs appear in unless the user indicates
123 this in the constraints.
125 Output operands must specifically indicate which reg an output
126 appears in after an asm. "=f" is not allowed: the operand
127 constraints must select a class with a single reg.
129 5. Output operands may not be "inserted" between existing stack regs.
130 Since no 387 opcode uses a read/write operand, all output operands
131 are dead before the asm_operands, and are pushed by the asm_operands.
132 It makes no sense to push anywhere but the top of the reg-stack.
134 Output operands must start at the top of the reg-stack: output
135 operands may not "skip" a reg.
137 6. Some asm statements may need extra stack space for internal
138 calculations. This can be guaranteed by clobbering stack registers
139 unrelated to the inputs and outputs.
141 Here are a couple of reasonable asms to want to write. This asm
142 takes one input, which is internally popped, and produces two outputs.
144 asm ("fsincos" : "=t" (cos), "=u" (sin) : "0" (inp));
146 This asm takes two inputs, which are popped by the fyl2xp1 opcode,
147 and replaces them with one output. The user must code the "st(1)"
148 clobber for reg-stack.c to know that fyl2xp1 pops both inputs.
150 asm ("fyl2xp1" : "=t" (result) : "0" (x), "u" (y) : "st(1)");
159 #include "function.h"
160 #include "insn-config.h"
162 #include "hard-reg-set.h"
167 #include "basic-block.h"
173 #define REG_STACK_SIZE (LAST_STACK_REG - FIRST_STACK_REG + 1)
175 /* This is the basic stack record. TOP is an index into REG[] such
176 that REG[TOP] is the top of stack. If TOP is -1 the stack is empty.
178 If TOP is -2, REG[] is not yet initialized. Stack initialization
179 consists of placing each live reg in array `reg' and setting `top'
182 REG_SET indicates which registers are live. */
184 typedef struct stack_def
186 int top
; /* index to top stack element */
187 HARD_REG_SET reg_set
; /* set of live registers */
188 unsigned char reg
[REG_STACK_SIZE
];/* register - stack mapping */
191 /* This is used to carry information about basic blocks. It is
192 attached to the AUX field of the standard CFG block. */
194 typedef struct block_info_def
196 struct stack_def stack_in
; /* Input stack configuration. */
197 struct stack_def stack_out
; /* Output stack configuration. */
198 HARD_REG_SET out_reg_set
; /* Stack regs live on output. */
199 int done
; /* True if block already converted. */
200 int predecesors
; /* Number of predecesors that needs
204 #define BLOCK_INFO(B) ((block_info) (B)->aux)
206 /* Passed to change_stack to indicate where to emit insns. */
213 /* We use this array to cache info about insns, because otherwise we
214 spend too much time in stack_regs_mentioned_p.
216 Indexed by insn UIDs. A value of zero is uninitialized, one indicates
217 the insn uses stack registers, two indicates the insn does not use
219 static varray_type stack_regs_mentioned_data
;
221 /* The block we're currently working on. */
222 static basic_block current_block
;
224 /* This is the register file for all register after conversion */
226 FP_mode_reg
[LAST_STACK_REG
+1-FIRST_STACK_REG
][(int) MAX_MACHINE_MODE
];
228 #define FP_MODE_REG(regno,mode) \
229 (FP_mode_reg[(regno)-FIRST_STACK_REG][(int)(mode)])
231 /* Used to initialize uninitialized registers. */
234 /* Forward declarations */
236 static int stack_regs_mentioned_p
PARAMS ((rtx pat
));
237 static void straighten_stack
PARAMS ((rtx
, stack
));
238 static void pop_stack
PARAMS ((stack
, int));
239 static rtx
*get_true_reg
PARAMS ((rtx
*));
241 static int check_asm_stack_operands
PARAMS ((rtx
));
242 static int get_asm_operand_n_inputs
PARAMS ((rtx
));
243 static rtx stack_result
PARAMS ((tree
));
244 static void replace_reg
PARAMS ((rtx
*, int));
245 static void remove_regno_note
PARAMS ((rtx
, enum reg_note
,
247 static int get_hard_regnum
PARAMS ((stack
, rtx
));
248 static void delete_insn_for_stacker
PARAMS ((rtx
));
249 static rtx emit_pop_insn
PARAMS ((rtx
, stack
, rtx
,
251 static void emit_swap_insn
PARAMS ((rtx
, stack
, rtx
));
252 static void move_for_stack_reg
PARAMS ((rtx
, stack
, rtx
));
253 static int swap_rtx_condition_1
PARAMS ((rtx
));
254 static int swap_rtx_condition
PARAMS ((rtx
));
255 static void compare_for_stack_reg
PARAMS ((rtx
, stack
, rtx
));
256 static void subst_stack_regs_pat
PARAMS ((rtx
, stack
, rtx
));
257 static void subst_asm_stack_regs
PARAMS ((rtx
, stack
));
258 static void subst_stack_regs
PARAMS ((rtx
, stack
));
259 static void change_stack
PARAMS ((rtx
, stack
, stack
,
261 static int convert_regs_entry
PARAMS ((void));
262 static void convert_regs_exit
PARAMS ((void));
263 static int convert_regs_1
PARAMS ((FILE *, basic_block
));
264 static int convert_regs_2
PARAMS ((FILE *, basic_block
));
265 static int convert_regs
PARAMS ((FILE *));
266 static void print_stack
PARAMS ((FILE *, stack
));
267 static rtx next_flags_user
PARAMS ((rtx
));
268 static void record_label_references
PARAMS ((rtx
, rtx
));
269 static bool compensate_edge
PARAMS ((edge
, FILE *));
271 /* Return non-zero if any stack register is mentioned somewhere within PAT. */
274 stack_regs_mentioned_p (pat
)
277 register const char *fmt
;
280 if (STACK_REG_P (pat
))
283 fmt
= GET_RTX_FORMAT (GET_CODE (pat
));
284 for (i
= GET_RTX_LENGTH (GET_CODE (pat
)) - 1; i
>= 0; i
--)
290 for (j
= XVECLEN (pat
, i
) - 1; j
>= 0; j
--)
291 if (stack_regs_mentioned_p (XVECEXP (pat
, i
, j
)))
294 else if (fmt
[i
] == 'e' && stack_regs_mentioned_p (XEXP (pat
, i
)))
301 /* Return nonzero if INSN mentions stacked registers, else return zero. */
304 stack_regs_mentioned (insn
)
307 unsigned int uid
, max
;
310 if (! INSN_P (insn
) || !stack_regs_mentioned_data
)
313 uid
= INSN_UID (insn
);
314 max
= VARRAY_SIZE (stack_regs_mentioned_data
);
317 /* Allocate some extra size to avoid too many reallocs, but
318 do not grow too quickly. */
319 max
= uid
+ uid
/ 20;
320 VARRAY_GROW (stack_regs_mentioned_data
, max
);
323 test
= VARRAY_CHAR (stack_regs_mentioned_data
, uid
);
326 /* This insn has yet to be examined. Do so now. */
327 test
= stack_regs_mentioned_p (PATTERN (insn
)) ? 1 : 2;
328 VARRAY_CHAR (stack_regs_mentioned_data
, uid
) = test
;
334 static rtx ix86_flags_rtx
;
337 next_flags_user (insn
)
340 /* Search forward looking for the first use of this value.
341 Stop at block boundaries. */
343 while (insn
!= current_block
->end
)
345 insn
= NEXT_INSN (insn
);
347 if (INSN_P (insn
) && reg_mentioned_p (ix86_flags_rtx
, PATTERN (insn
)))
350 if (GET_CODE (insn
) == CALL_INSN
)
356 /* Reorganise the stack into ascending numbers,
360 straighten_stack (insn
, regstack
)
364 struct stack_def temp_stack
;
367 /* If there is only a single register on the stack, then the stack is
368 already in increasing order and no reorganization is needed.
370 Similarly if the stack is empty. */
371 if (regstack
->top
<= 0)
374 COPY_HARD_REG_SET (temp_stack
.reg_set
, regstack
->reg_set
);
376 for (top
= temp_stack
.top
= regstack
->top
; top
>= 0; top
--)
377 temp_stack
.reg
[top
] = FIRST_STACK_REG
+ temp_stack
.top
- top
;
379 change_stack (insn
, regstack
, &temp_stack
, EMIT_AFTER
);
382 /* Pop a register from the stack */
385 pop_stack (regstack
, regno
)
389 int top
= regstack
->top
;
391 CLEAR_HARD_REG_BIT (regstack
->reg_set
, regno
);
393 /* If regno was not at the top of stack then adjust stack */
394 if (regstack
->reg
[top
] != regno
)
397 for (i
= regstack
->top
; i
>= 0; i
--)
398 if (regstack
->reg
[i
] == regno
)
401 for (j
= i
; j
< top
; j
++)
402 regstack
->reg
[j
] = regstack
->reg
[j
+ 1];
408 /* Convert register usage from "flat" register file usage to a "stack
409 register file. FIRST is the first insn in the function, FILE is the
412 Construct a CFG and run life analysis. Then convert each insn one
413 by one. Run a last cleanup_cfg pass, if optimizing, to eliminate
414 code duplication created when the converter inserts pop insns on
418 reg_to_stack (first
, file
)
426 /* Clean up previous run. */
427 if (stack_regs_mentioned_data
)
429 VARRAY_FREE (stack_regs_mentioned_data
);
430 stack_regs_mentioned_data
= 0;
436 /* See if there is something to do. Flow analysis is quite
437 expensive so we might save some compilation time. */
438 for (i
= FIRST_STACK_REG
; i
<= LAST_STACK_REG
; i
++)
439 if (regs_ever_live
[i
])
441 if (i
> LAST_STACK_REG
)
444 /* Ok, floating point instructions exist. If not optimizing,
445 build the CFG and run life analysis. */
447 find_basic_blocks (first
, max_reg_num (), file
);
448 count_or_remove_death_notes (NULL
, 1);
449 life_analysis (first
, file
, PROP_DEATH_NOTES
);
450 mark_dfs_back_edges ();
452 /* Set up block info for each basic block. */
453 bi
= (block_info
) xcalloc ((n_basic_blocks
+ 1), sizeof (*bi
));
454 for (i
= n_basic_blocks
- 1; i
>= 0; --i
)
457 basic_block bb
= BASIC_BLOCK (i
);
459 for (e
= bb
->pred
; e
; e
=e
->pred_next
)
460 if (!(e
->flags
& EDGE_DFS_BACK
)
461 && e
->src
!= ENTRY_BLOCK_PTR
)
462 BLOCK_INFO (bb
)->predecesors
++;
464 EXIT_BLOCK_PTR
->aux
= bi
+ n_basic_blocks
;
466 /* Create the replacement registers up front. */
467 for (i
= FIRST_STACK_REG
; i
<= LAST_STACK_REG
; i
++)
469 enum machine_mode mode
;
470 for (mode
= GET_CLASS_NARROWEST_MODE (MODE_FLOAT
);
472 mode
= GET_MODE_WIDER_MODE (mode
))
473 FP_MODE_REG (i
, mode
) = gen_rtx_REG (mode
, i
);
474 for (mode
= GET_CLASS_NARROWEST_MODE (MODE_COMPLEX_FLOAT
);
476 mode
= GET_MODE_WIDER_MODE (mode
))
477 FP_MODE_REG (i
, mode
) = gen_rtx_REG (mode
, i
);
480 ix86_flags_rtx
= gen_rtx_REG (CCmode
, FLAGS_REG
);
482 /* A QNaN for initializing uninitialized variables.
484 ??? We can't load from constant memory in PIC mode, because
485 we're insertting these instructions before the prologue and
486 the PIC register hasn't been set up. In that case, fall back
487 on zero, which we can get from `ldz'. */
490 nan
= CONST0_RTX (SFmode
);
493 nan
= gen_lowpart (SFmode
, GEN_INT (0x7fc00000));
494 nan
= force_const_mem (SFmode
, nan
);
497 /* Allocate a cache for stack_regs_mentioned. */
498 max_uid
= get_max_uid ();
499 VARRAY_CHAR_INIT (stack_regs_mentioned_data
, max_uid
+ 1,
500 "stack_regs_mentioned cache");
507 /* Check PAT, which is in INSN, for LABEL_REFs. Add INSN to the
508 label's chain of references, and note which insn contains each
512 record_label_references (insn
, pat
)
515 register enum rtx_code code
= GET_CODE (pat
);
517 register const char *fmt
;
519 if (code
== LABEL_REF
)
521 register rtx label
= XEXP (pat
, 0);
524 if (GET_CODE (label
) != CODE_LABEL
)
527 /* If this is an undefined label, LABEL_REFS (label) contains
529 if (INSN_UID (label
) == 0)
532 /* Don't make a duplicate in the code_label's chain. */
534 for (ref
= LABEL_REFS (label
);
536 ref
= LABEL_NEXTREF (ref
))
537 if (CONTAINING_INSN (ref
) == insn
)
540 CONTAINING_INSN (pat
) = insn
;
541 LABEL_NEXTREF (pat
) = LABEL_REFS (label
);
542 LABEL_REFS (label
) = pat
;
547 fmt
= GET_RTX_FORMAT (code
);
548 for (i
= GET_RTX_LENGTH (code
) - 1; i
>= 0; i
--)
551 record_label_references (insn
, XEXP (pat
, i
));
555 for (j
= 0; j
< XVECLEN (pat
, i
); j
++)
556 record_label_references (insn
, XVECEXP (pat
, i
, j
));
561 /* Return a pointer to the REG expression within PAT. If PAT is not a
562 REG, possible enclosed by a conversion rtx, return the inner part of
563 PAT that stopped the search. */
570 switch (GET_CODE (*pat
))
573 /* Eliminate FP subregister accesses in favour of the
574 actual FP register in use. */
577 if (FP_REG_P (subreg
= SUBREG_REG (*pat
)))
579 int regno_off
= subreg_regno_offset (REGNO (subreg
),
583 *pat
= FP_MODE_REG (REGNO (subreg
) + regno_off
,
592 pat
= & XEXP (*pat
, 0);
596 /* There are many rules that an asm statement for stack-like regs must
597 follow. Those rules are explained at the top of this file: the rule
598 numbers below refer to that explanation. */
601 check_asm_stack_operands (insn
)
606 int malformed_asm
= 0;
607 rtx body
= PATTERN (insn
);
609 char reg_used_as_output
[FIRST_PSEUDO_REGISTER
];
610 char implicitly_dies
[FIRST_PSEUDO_REGISTER
];
613 rtx
*clobber_reg
= 0;
614 int n_inputs
, n_outputs
;
616 /* Find out what the constraints require. If no constraint
617 alternative matches, this asm is malformed. */
619 constrain_operands (1);
620 alt
= which_alternative
;
622 preprocess_constraints ();
624 n_inputs
= get_asm_operand_n_inputs (body
);
625 n_outputs
= recog_data
.n_operands
- n_inputs
;
630 /* Avoid further trouble with this insn. */
631 PATTERN (insn
) = gen_rtx_USE (VOIDmode
, const0_rtx
);
635 /* Strip SUBREGs here to make the following code simpler. */
636 for (i
= 0; i
< recog_data
.n_operands
; i
++)
637 if (GET_CODE (recog_data
.operand
[i
]) == SUBREG
638 && GET_CODE (SUBREG_REG (recog_data
.operand
[i
])) == REG
)
639 recog_data
.operand
[i
] = SUBREG_REG (recog_data
.operand
[i
]);
641 /* Set up CLOBBER_REG. */
645 if (GET_CODE (body
) == PARALLEL
)
647 clobber_reg
= (rtx
*) alloca (XVECLEN (body
, 0) * sizeof (rtx
));
649 for (i
= 0; i
< XVECLEN (body
, 0); i
++)
650 if (GET_CODE (XVECEXP (body
, 0, i
)) == CLOBBER
)
652 rtx clobber
= XVECEXP (body
, 0, i
);
653 rtx reg
= XEXP (clobber
, 0);
655 if (GET_CODE (reg
) == SUBREG
&& GET_CODE (SUBREG_REG (reg
)) == REG
)
656 reg
= SUBREG_REG (reg
);
658 if (STACK_REG_P (reg
))
660 clobber_reg
[n_clobbers
] = reg
;
666 /* Enforce rule #4: Output operands must specifically indicate which
667 reg an output appears in after an asm. "=f" is not allowed: the
668 operand constraints must select a class with a single reg.
670 Also enforce rule #5: Output operands must start at the top of
671 the reg-stack: output operands may not "skip" a reg. */
673 memset (reg_used_as_output
, 0, sizeof (reg_used_as_output
));
674 for (i
= 0; i
< n_outputs
; i
++)
675 if (STACK_REG_P (recog_data
.operand
[i
]))
677 if (reg_class_size
[(int) recog_op_alt
[i
][alt
].class] != 1)
679 error_for_asm (insn
, "Output constraint %d must specify a single register", i
);
686 for (j
= 0; j
< n_clobbers
; j
++)
687 if (REGNO (recog_data
.operand
[i
]) == REGNO (clobber_reg
[j
]))
689 error_for_asm (insn
, "Output constraint %d cannot be specified together with \"%s\" clobber",
690 i
, reg_names
[REGNO (clobber_reg
[j
])]);
695 reg_used_as_output
[REGNO (recog_data
.operand
[i
])] = 1;
700 /* Search for first non-popped reg. */
701 for (i
= FIRST_STACK_REG
; i
< LAST_STACK_REG
+ 1; i
++)
702 if (! reg_used_as_output
[i
])
705 /* If there are any other popped regs, that's an error. */
706 for (; i
< LAST_STACK_REG
+ 1; i
++)
707 if (reg_used_as_output
[i
])
710 if (i
!= LAST_STACK_REG
+ 1)
712 error_for_asm (insn
, "Output regs must be grouped at top of stack");
716 /* Enforce rule #2: All implicitly popped input regs must be closer
717 to the top of the reg-stack than any input that is not implicitly
720 memset (implicitly_dies
, 0, sizeof (implicitly_dies
));
721 for (i
= n_outputs
; i
< n_outputs
+ n_inputs
; i
++)
722 if (STACK_REG_P (recog_data
.operand
[i
]))
724 /* An input reg is implicitly popped if it is tied to an
725 output, or if there is a CLOBBER for it. */
728 for (j
= 0; j
< n_clobbers
; j
++)
729 if (operands_match_p (clobber_reg
[j
], recog_data
.operand
[i
]))
732 if (j
< n_clobbers
|| recog_op_alt
[i
][alt
].matches
>= 0)
733 implicitly_dies
[REGNO (recog_data
.operand
[i
])] = 1;
736 /* Search for first non-popped reg. */
737 for (i
= FIRST_STACK_REG
; i
< LAST_STACK_REG
+ 1; i
++)
738 if (! implicitly_dies
[i
])
741 /* If there are any other popped regs, that's an error. */
742 for (; i
< LAST_STACK_REG
+ 1; i
++)
743 if (implicitly_dies
[i
])
746 if (i
!= LAST_STACK_REG
+ 1)
749 "Implicitly popped regs must be grouped at top of stack");
753 /* Enfore rule #3: If any input operand uses the "f" constraint, all
754 output constraints must use the "&" earlyclobber.
756 ??? Detect this more deterministically by having constrain_asm_operands
757 record any earlyclobber. */
759 for (i
= n_outputs
; i
< n_outputs
+ n_inputs
; i
++)
760 if (recog_op_alt
[i
][alt
].matches
== -1)
764 for (j
= 0; j
< n_outputs
; j
++)
765 if (operands_match_p (recog_data
.operand
[j
], recog_data
.operand
[i
]))
768 "Output operand %d must use `&' constraint", j
);
775 /* Avoid further trouble with this insn. */
776 PATTERN (insn
) = gen_rtx_USE (VOIDmode
, const0_rtx
);
783 /* Calculate the number of inputs and outputs in BODY, an
784 asm_operands. N_OPERANDS is the total number of operands, and
785 N_INPUTS and N_OUTPUTS are pointers to ints into which the results are
789 get_asm_operand_n_inputs (body
)
792 if (GET_CODE (body
) == SET
&& GET_CODE (SET_SRC (body
)) == ASM_OPERANDS
)
793 return ASM_OPERANDS_INPUT_LENGTH (SET_SRC (body
));
795 else if (GET_CODE (body
) == ASM_OPERANDS
)
796 return ASM_OPERANDS_INPUT_LENGTH (body
);
798 else if (GET_CODE (body
) == PARALLEL
799 && GET_CODE (XVECEXP (body
, 0, 0)) == SET
)
800 return ASM_OPERANDS_INPUT_LENGTH (SET_SRC (XVECEXP (body
, 0, 0)));
802 else if (GET_CODE (body
) == PARALLEL
803 && GET_CODE (XVECEXP (body
, 0, 0)) == ASM_OPERANDS
)
804 return ASM_OPERANDS_INPUT_LENGTH (XVECEXP (body
, 0, 0));
809 /* If current function returns its result in an fp stack register,
810 return the REG. Otherwise, return 0. */
818 /* If the value is supposed to be returned in memory, then clearly
819 it is not returned in a stack register. */
820 if (aggregate_value_p (DECL_RESULT (decl
)))
823 result
= DECL_RTL_IF_SET (DECL_RESULT (decl
));
826 #ifdef FUNCTION_OUTGOING_VALUE
828 = FUNCTION_OUTGOING_VALUE (TREE_TYPE (DECL_RESULT (decl
)), decl
);
830 result
= FUNCTION_VALUE (TREE_TYPE (DECL_RESULT (decl
)), decl
);
834 return result
!= 0 && STACK_REG_P (result
) ? result
: 0;
839 * This section deals with stack register substitution, and forms the second
843 /* Replace REG, which is a pointer to a stack reg RTX, with an RTX for
844 the desired hard REGNO. */
847 replace_reg (reg
, regno
)
851 if (regno
< FIRST_STACK_REG
|| regno
> LAST_STACK_REG
852 || ! STACK_REG_P (*reg
))
855 switch (GET_MODE_CLASS (GET_MODE (*reg
)))
859 case MODE_COMPLEX_FLOAT
:;
862 *reg
= FP_MODE_REG (regno
, GET_MODE (*reg
));
865 /* Remove a note of type NOTE, which must be found, for register
866 number REGNO from INSN. Remove only one such note. */
869 remove_regno_note (insn
, note
, regno
)
874 register rtx
*note_link
, this;
876 note_link
= ®_NOTES(insn
);
877 for (this = *note_link
; this; this = XEXP (this, 1))
878 if (REG_NOTE_KIND (this) == note
879 && REG_P (XEXP (this, 0)) && REGNO (XEXP (this, 0)) == regno
)
881 *note_link
= XEXP (this, 1);
885 note_link
= &XEXP (this, 1);
890 /* Find the hard register number of virtual register REG in REGSTACK.
891 The hard register number is relative to the top of the stack. -1 is
892 returned if the register is not found. */
895 get_hard_regnum (regstack
, reg
)
901 if (! STACK_REG_P (reg
))
904 for (i
= regstack
->top
; i
>= 0; i
--)
905 if (regstack
->reg
[i
] == REGNO (reg
))
908 return i
>= 0 ? (FIRST_STACK_REG
+ regstack
->top
- i
) : -1;
911 /* Delete INSN from the RTL. Mark the insn, but don't remove it from
912 the chain of insns. Doing so could confuse block_begin and block_end
913 if this were the only insn in the block. */
916 delete_insn_for_stacker (insn
)
919 PUT_CODE (insn
, NOTE
);
920 NOTE_LINE_NUMBER (insn
) = NOTE_INSN_DELETED
;
921 NOTE_SOURCE_FILE (insn
) = 0;
924 /* Emit an insn to pop virtual register REG before or after INSN.
925 REGSTACK is the stack state after INSN and is updated to reflect this
926 pop. WHEN is either emit_insn_before or emit_insn_after. A pop insn
927 is represented as a SET whose destination is the register to be popped
928 and source is the top of stack. A death note for the top of stack
929 cases the movdf pattern to pop. */
932 emit_pop_insn (insn
, regstack
, reg
, where
)
936 enum emit_where where
;
938 rtx pop_insn
, pop_rtx
;
941 /* For complex types take care to pop both halves. These may survive in
942 CLOBBER and USE expressions. */
943 if (COMPLEX_MODE_P (GET_MODE (reg
)))
945 rtx reg1
= FP_MODE_REG (REGNO (reg
), DFmode
);
946 rtx reg2
= FP_MODE_REG (REGNO (reg
) + 1, DFmode
);
949 if (get_hard_regnum (regstack
, reg1
) >= 0)
950 pop_insn
= emit_pop_insn (insn
, regstack
, reg1
, where
);
951 if (get_hard_regnum (regstack
, reg2
) >= 0)
952 pop_insn
= emit_pop_insn (insn
, regstack
, reg2
, where
);
958 hard_regno
= get_hard_regnum (regstack
, reg
);
960 if (hard_regno
< FIRST_STACK_REG
)
963 pop_rtx
= gen_rtx_SET (VOIDmode
, FP_MODE_REG (hard_regno
, DFmode
),
964 FP_MODE_REG (FIRST_STACK_REG
, DFmode
));
966 if (where
== EMIT_AFTER
)
967 pop_insn
= emit_block_insn_after (pop_rtx
, insn
, current_block
);
969 pop_insn
= emit_block_insn_before (pop_rtx
, insn
, current_block
);
972 = gen_rtx_EXPR_LIST (REG_DEAD
, FP_MODE_REG (FIRST_STACK_REG
, DFmode
),
973 REG_NOTES (pop_insn
));
975 regstack
->reg
[regstack
->top
- (hard_regno
- FIRST_STACK_REG
)]
976 = regstack
->reg
[regstack
->top
];
978 CLEAR_HARD_REG_BIT (regstack
->reg_set
, REGNO (reg
));
983 /* Emit an insn before or after INSN to swap virtual register REG with
984 the top of stack. REGSTACK is the stack state before the swap, and
985 is updated to reflect the swap. A swap insn is represented as a
986 PARALLEL of two patterns: each pattern moves one reg to the other.
988 If REG is already at the top of the stack, no insn is emitted. */
991 emit_swap_insn (insn
, regstack
, reg
)
998 int tmp
, other_reg
; /* swap regno temps */
999 rtx i1
; /* the stack-reg insn prior to INSN */
1000 rtx i1set
= NULL_RTX
; /* the SET rtx within I1 */
1002 hard_regno
= get_hard_regnum (regstack
, reg
);
1004 if (hard_regno
< FIRST_STACK_REG
)
1006 if (hard_regno
== FIRST_STACK_REG
)
1009 other_reg
= regstack
->top
- (hard_regno
- FIRST_STACK_REG
);
1011 tmp
= regstack
->reg
[other_reg
];
1012 regstack
->reg
[other_reg
] = regstack
->reg
[regstack
->top
];
1013 regstack
->reg
[regstack
->top
] = tmp
;
1015 /* Find the previous insn involving stack regs, but don't pass a
1018 if (current_block
&& insn
!= current_block
->head
)
1020 rtx tmp
= PREV_INSN (insn
);
1021 rtx limit
= PREV_INSN (current_block
->head
);
1022 while (tmp
!= limit
)
1024 if (GET_CODE (tmp
) == CODE_LABEL
1025 || GET_CODE (tmp
) == CALL_INSN
1026 || NOTE_INSN_BASIC_BLOCK_P (tmp
)
1027 || (GET_CODE (tmp
) == INSN
1028 && stack_regs_mentioned (tmp
)))
1033 tmp
= PREV_INSN (tmp
);
1038 && (i1set
= single_set (i1
)) != NULL_RTX
)
1040 rtx i1src
= *get_true_reg (&SET_SRC (i1set
));
1041 rtx i1dest
= *get_true_reg (&SET_DEST (i1set
));
1043 /* If the previous register stack push was from the reg we are to
1044 swap with, omit the swap. */
1046 if (GET_CODE (i1dest
) == REG
&& REGNO (i1dest
) == FIRST_STACK_REG
1047 && GET_CODE (i1src
) == REG
1048 && REGNO (i1src
) == (unsigned) hard_regno
- 1
1049 && find_regno_note (i1
, REG_DEAD
, FIRST_STACK_REG
) == NULL_RTX
)
1052 /* If the previous insn wrote to the reg we are to swap with,
1055 if (GET_CODE (i1dest
) == REG
&& REGNO (i1dest
) == (unsigned) hard_regno
1056 && GET_CODE (i1src
) == REG
&& REGNO (i1src
) == FIRST_STACK_REG
1057 && find_regno_note (i1
, REG_DEAD
, FIRST_STACK_REG
) == NULL_RTX
)
1061 swap_rtx
= gen_swapxf (FP_MODE_REG (hard_regno
, XFmode
),
1062 FP_MODE_REG (FIRST_STACK_REG
, XFmode
));
1065 emit_block_insn_after (swap_rtx
, i1
, current_block
);
1066 else if (current_block
)
1067 emit_block_insn_before (swap_rtx
, current_block
->head
, current_block
);
1069 emit_insn_before (swap_rtx
, insn
);
1072 /* Handle a move to or from a stack register in PAT, which is in INSN.
1073 REGSTACK is the current stack. */
1076 move_for_stack_reg (insn
, regstack
, pat
)
1081 rtx
*psrc
= get_true_reg (&SET_SRC (pat
));
1082 rtx
*pdest
= get_true_reg (&SET_DEST (pat
));
1086 src
= *psrc
; dest
= *pdest
;
1088 if (STACK_REG_P (src
) && STACK_REG_P (dest
))
1090 /* Write from one stack reg to another. If SRC dies here, then
1091 just change the register mapping and delete the insn. */
1093 note
= find_regno_note (insn
, REG_DEAD
, REGNO (src
));
1098 /* If this is a no-op move, there must not be a REG_DEAD note. */
1099 if (REGNO (src
) == REGNO (dest
))
1102 for (i
= regstack
->top
; i
>= 0; i
--)
1103 if (regstack
->reg
[i
] == REGNO (src
))
1106 /* The source must be live, and the dest must be dead. */
1107 if (i
< 0 || get_hard_regnum (regstack
, dest
) >= FIRST_STACK_REG
)
1110 /* It is possible that the dest is unused after this insn.
1111 If so, just pop the src. */
1113 if (find_regno_note (insn
, REG_UNUSED
, REGNO (dest
)))
1115 emit_pop_insn (insn
, regstack
, src
, EMIT_AFTER
);
1117 delete_insn_for_stacker (insn
);
1121 regstack
->reg
[i
] = REGNO (dest
);
1123 SET_HARD_REG_BIT (regstack
->reg_set
, REGNO (dest
));
1124 CLEAR_HARD_REG_BIT (regstack
->reg_set
, REGNO (src
));
1126 delete_insn_for_stacker (insn
);
1131 /* The source reg does not die. */
1133 /* If this appears to be a no-op move, delete it, or else it
1134 will confuse the machine description output patterns. But if
1135 it is REG_UNUSED, we must pop the reg now, as per-insn processing
1136 for REG_UNUSED will not work for deleted insns. */
1138 if (REGNO (src
) == REGNO (dest
))
1140 if (find_regno_note (insn
, REG_UNUSED
, REGNO (dest
)))
1141 emit_pop_insn (insn
, regstack
, dest
, EMIT_AFTER
);
1143 delete_insn_for_stacker (insn
);
1147 /* The destination ought to be dead */
1148 if (get_hard_regnum (regstack
, dest
) >= FIRST_STACK_REG
)
1151 replace_reg (psrc
, get_hard_regnum (regstack
, src
));
1153 regstack
->reg
[++regstack
->top
] = REGNO (dest
);
1154 SET_HARD_REG_BIT (regstack
->reg_set
, REGNO (dest
));
1155 replace_reg (pdest
, FIRST_STACK_REG
);
1157 else if (STACK_REG_P (src
))
1159 /* Save from a stack reg to MEM, or possibly integer reg. Since
1160 only top of stack may be saved, emit an exchange first if
1163 emit_swap_insn (insn
, regstack
, src
);
1165 note
= find_regno_note (insn
, REG_DEAD
, REGNO (src
));
1168 replace_reg (&XEXP (note
, 0), FIRST_STACK_REG
);
1170 CLEAR_HARD_REG_BIT (regstack
->reg_set
, REGNO (src
));
1172 else if ((GET_MODE (src
) == XFmode
|| GET_MODE (src
) == TFmode
)
1173 && regstack
->top
< REG_STACK_SIZE
- 1)
1175 /* A 387 cannot write an XFmode value to a MEM without
1176 clobbering the source reg. The output code can handle
1177 this by reading back the value from the MEM.
1178 But it is more efficient to use a temp register if one is
1179 available. Push the source value here if the register
1180 stack is not full, and then write the value to memory via
1182 rtx push_rtx
, push_insn
;
1183 rtx top_stack_reg
= FP_MODE_REG (FIRST_STACK_REG
, GET_MODE (src
));
1185 if (GET_MODE (src
) == TFmode
)
1186 push_rtx
= gen_movtf (top_stack_reg
, top_stack_reg
);
1188 push_rtx
= gen_movxf (top_stack_reg
, top_stack_reg
);
1189 push_insn
= emit_insn_before (push_rtx
, insn
);
1190 REG_NOTES (insn
) = gen_rtx_EXPR_LIST (REG_DEAD
, top_stack_reg
,
1194 replace_reg (psrc
, FIRST_STACK_REG
);
1196 else if (STACK_REG_P (dest
))
1198 /* Load from MEM, or possibly integer REG or constant, into the
1199 stack regs. The actual target is always the top of the
1200 stack. The stack mapping is changed to reflect that DEST is
1201 now at top of stack. */
1203 /* The destination ought to be dead */
1204 if (get_hard_regnum (regstack
, dest
) >= FIRST_STACK_REG
)
1207 if (regstack
->top
>= REG_STACK_SIZE
)
1210 regstack
->reg
[++regstack
->top
] = REGNO (dest
);
1211 SET_HARD_REG_BIT (regstack
->reg_set
, REGNO (dest
));
1212 replace_reg (pdest
, FIRST_STACK_REG
);
1218 /* Swap the condition on a branch, if there is one. Return true if we
1219 found a condition to swap. False if the condition was not used as
1223 swap_rtx_condition_1 (pat
)
1226 register const char *fmt
;
1227 register int i
, r
= 0;
1229 if (GET_RTX_CLASS (GET_CODE (pat
)) == '<')
1231 PUT_CODE (pat
, swap_condition (GET_CODE (pat
)));
1236 fmt
= GET_RTX_FORMAT (GET_CODE (pat
));
1237 for (i
= GET_RTX_LENGTH (GET_CODE (pat
)) - 1; i
>= 0; i
--)
1243 for (j
= XVECLEN (pat
, i
) - 1; j
>= 0; j
--)
1244 r
|= swap_rtx_condition_1 (XVECEXP (pat
, i
, j
));
1246 else if (fmt
[i
] == 'e')
1247 r
|= swap_rtx_condition_1 (XEXP (pat
, i
));
1255 swap_rtx_condition (insn
)
1258 rtx pat
= PATTERN (insn
);
1260 /* We're looking for a single set to cc0 or an HImode temporary. */
1262 if (GET_CODE (pat
) == SET
1263 && GET_CODE (SET_DEST (pat
)) == REG
1264 && REGNO (SET_DEST (pat
)) == FLAGS_REG
)
1266 insn
= next_flags_user (insn
);
1267 if (insn
== NULL_RTX
)
1269 pat
= PATTERN (insn
);
1272 /* See if this is, or ends in, a fnstsw, aka unspec 9. If so, we're
1273 not doing anything with the cc value right now. We may be able to
1274 search for one though. */
1276 if (GET_CODE (pat
) == SET
1277 && GET_CODE (SET_SRC (pat
)) == UNSPEC
1278 && XINT (SET_SRC (pat
), 1) == 9)
1280 rtx dest
= SET_DEST (pat
);
1282 /* Search forward looking for the first use of this value.
1283 Stop at block boundaries. */
1284 while (insn
!= current_block
->end
)
1286 insn
= NEXT_INSN (insn
);
1287 if (INSN_P (insn
) && reg_mentioned_p (dest
, insn
))
1289 if (GET_CODE (insn
) == CALL_INSN
)
1293 /* So we've found the insn using this value. If it is anything
1294 other than sahf, aka unspec 10, or the value does not die
1295 (meaning we'd have to search further), then we must give up. */
1296 pat
= PATTERN (insn
);
1297 if (GET_CODE (pat
) != SET
1298 || GET_CODE (SET_SRC (pat
)) != UNSPEC
1299 || XINT (SET_SRC (pat
), 1) != 10
1300 || ! dead_or_set_p (insn
, dest
))
1303 /* Now we are prepared to handle this as a normal cc0 setter. */
1304 insn
= next_flags_user (insn
);
1305 if (insn
== NULL_RTX
)
1307 pat
= PATTERN (insn
);
1310 if (swap_rtx_condition_1 (pat
))
1313 INSN_CODE (insn
) = -1;
1314 if (recog_memoized (insn
) == -1)
1316 /* In case the flags don't die here, recurse to try fix
1317 following user too. */
1318 else if (! dead_or_set_p (insn
, ix86_flags_rtx
))
1320 insn
= next_flags_user (insn
);
1321 if (!insn
|| !swap_rtx_condition (insn
))
1326 swap_rtx_condition_1 (pat
);
1334 /* Handle a comparison. Special care needs to be taken to avoid
1335 causing comparisons that a 387 cannot do correctly, such as EQ.
1337 Also, a pop insn may need to be emitted. The 387 does have an
1338 `fcompp' insn that can pop two regs, but it is sometimes too expensive
1339 to do this - a `fcomp' followed by a `fstpl %st(0)' may be easier to
1343 compare_for_stack_reg (insn
, regstack
, pat_src
)
1349 rtx src1_note
, src2_note
;
1352 src1
= get_true_reg (&XEXP (pat_src
, 0));
1353 src2
= get_true_reg (&XEXP (pat_src
, 1));
1354 flags_user
= next_flags_user (insn
);
1356 /* ??? If fxch turns out to be cheaper than fstp, give priority to
1357 registers that die in this insn - move those to stack top first. */
1358 if ((! STACK_REG_P (*src1
)
1359 || (STACK_REG_P (*src2
)
1360 && get_hard_regnum (regstack
, *src2
) == FIRST_STACK_REG
))
1361 && swap_rtx_condition (insn
))
1364 temp
= XEXP (pat_src
, 0);
1365 XEXP (pat_src
, 0) = XEXP (pat_src
, 1);
1366 XEXP (pat_src
, 1) = temp
;
1368 src1
= get_true_reg (&XEXP (pat_src
, 0));
1369 src2
= get_true_reg (&XEXP (pat_src
, 1));
1371 INSN_CODE (insn
) = -1;
1374 /* We will fix any death note later. */
1376 src1_note
= find_regno_note (insn
, REG_DEAD
, REGNO (*src1
));
1378 if (STACK_REG_P (*src2
))
1379 src2_note
= find_regno_note (insn
, REG_DEAD
, REGNO (*src2
));
1381 src2_note
= NULL_RTX
;
1383 emit_swap_insn (insn
, regstack
, *src1
);
1385 replace_reg (src1
, FIRST_STACK_REG
);
1387 if (STACK_REG_P (*src2
))
1388 replace_reg (src2
, get_hard_regnum (regstack
, *src2
));
1392 pop_stack (regstack
, REGNO (XEXP (src1_note
, 0)));
1393 replace_reg (&XEXP (src1_note
, 0), FIRST_STACK_REG
);
1396 /* If the second operand dies, handle that. But if the operands are
1397 the same stack register, don't bother, because only one death is
1398 needed, and it was just handled. */
1401 && ! (STACK_REG_P (*src1
) && STACK_REG_P (*src2
)
1402 && REGNO (*src1
) == REGNO (*src2
)))
1404 /* As a special case, two regs may die in this insn if src2 is
1405 next to top of stack and the top of stack also dies. Since
1406 we have already popped src1, "next to top of stack" is really
1407 at top (FIRST_STACK_REG) now. */
1409 if (get_hard_regnum (regstack
, XEXP (src2_note
, 0)) == FIRST_STACK_REG
1412 pop_stack (regstack
, REGNO (XEXP (src2_note
, 0)));
1413 replace_reg (&XEXP (src2_note
, 0), FIRST_STACK_REG
+ 1);
1417 /* The 386 can only represent death of the first operand in
1418 the case handled above. In all other cases, emit a separate
1419 pop and remove the death note from here. */
1421 /* link_cc0_insns (insn); */
1423 remove_regno_note (insn
, REG_DEAD
, REGNO (XEXP (src2_note
, 0)));
1425 emit_pop_insn (insn
, regstack
, XEXP (src2_note
, 0),
1431 /* Substitute new registers in PAT, which is part of INSN. REGSTACK
1432 is the current register layout. */
1435 subst_stack_regs_pat (insn
, regstack
, pat
)
1442 switch (GET_CODE (pat
))
1445 /* Deaths in USE insns can happen in non optimizing compilation.
1446 Handle them by popping the dying register. */
1447 src
= get_true_reg (&XEXP (pat
, 0));
1448 if (STACK_REG_P (*src
)
1449 && find_regno_note (insn
, REG_DEAD
, REGNO (*src
)))
1451 emit_pop_insn (insn
, regstack
, *src
, EMIT_AFTER
);
1454 /* ??? Uninitialized USE should not happen. */
1455 else if (get_hard_regnum (regstack
, *src
) == -1)
1463 dest
= get_true_reg (&XEXP (pat
, 0));
1464 if (STACK_REG_P (*dest
))
1466 note
= find_reg_note (insn
, REG_DEAD
, *dest
);
1468 if (pat
!= PATTERN (insn
))
1470 /* The fix_truncdi_1 pattern wants to be able to allocate
1471 it's own scratch register. It does this by clobbering
1472 an fp reg so that it is assured of an empty reg-stack
1473 register. If the register is live, kill it now.
1474 Remove the DEAD/UNUSED note so we don't try to kill it
1478 emit_pop_insn (insn
, regstack
, *dest
, EMIT_BEFORE
);
1481 note
= find_reg_note (insn
, REG_UNUSED
, *dest
);
1485 remove_note (insn
, note
);
1486 replace_reg (dest
, LAST_STACK_REG
);
1490 /* A top-level clobber with no REG_DEAD, and no hard-regnum
1491 indicates an uninitialized value. Because reload removed
1492 all other clobbers, this must be due to a function
1493 returning without a value. Load up a NaN. */
1496 && get_hard_regnum (regstack
, *dest
) == -1)
1498 pat
= gen_rtx_SET (VOIDmode
,
1499 FP_MODE_REG (REGNO (*dest
), SFmode
),
1501 PATTERN (insn
) = pat
;
1502 move_for_stack_reg (insn
, regstack
, pat
);
1504 if (! note
&& COMPLEX_MODE_P (GET_MODE (*dest
))
1505 && get_hard_regnum (regstack
, FP_MODE_REG (REGNO (*dest
), DFmode
)) == -1)
1507 pat
= gen_rtx_SET (VOIDmode
,
1508 FP_MODE_REG (REGNO (*dest
) + 1, SFmode
),
1510 PATTERN (insn
) = pat
;
1511 move_for_stack_reg (insn
, regstack
, pat
);
1520 rtx
*src1
= (rtx
*) 0, *src2
;
1521 rtx src1_note
, src2_note
;
1524 dest
= get_true_reg (&SET_DEST (pat
));
1525 src
= get_true_reg (&SET_SRC (pat
));
1526 pat_src
= SET_SRC (pat
);
1528 /* See if this is a `movM' pattern, and handle elsewhere if so. */
1529 if (STACK_REG_P (*src
)
1530 || (STACK_REG_P (*dest
)
1531 && (GET_CODE (*src
) == REG
|| GET_CODE (*src
) == MEM
1532 || GET_CODE (*src
) == CONST_DOUBLE
)))
1534 move_for_stack_reg (insn
, regstack
, pat
);
1538 switch (GET_CODE (pat_src
))
1541 compare_for_stack_reg (insn
, regstack
, pat_src
);
1547 for (count
= HARD_REGNO_NREGS (REGNO (*dest
), GET_MODE (*dest
));
1550 regstack
->reg
[++regstack
->top
] = REGNO (*dest
) + count
;
1551 SET_HARD_REG_BIT (regstack
->reg_set
, REGNO (*dest
) + count
);
1554 replace_reg (dest
, FIRST_STACK_REG
);
1558 /* This is a `tstM2' case. */
1559 if (*dest
!= cc0_rtx
)
1565 case FLOAT_TRUNCATE
:
1569 /* These insns only operate on the top of the stack. DEST might
1570 be cc0_rtx if we're processing a tstM pattern. Also, it's
1571 possible that the tstM case results in a REG_DEAD note on the
1575 src1
= get_true_reg (&XEXP (pat_src
, 0));
1577 emit_swap_insn (insn
, regstack
, *src1
);
1579 src1_note
= find_regno_note (insn
, REG_DEAD
, REGNO (*src1
));
1581 if (STACK_REG_P (*dest
))
1582 replace_reg (dest
, FIRST_STACK_REG
);
1586 replace_reg (&XEXP (src1_note
, 0), FIRST_STACK_REG
);
1588 CLEAR_HARD_REG_BIT (regstack
->reg_set
, REGNO (*src1
));
1591 replace_reg (src1
, FIRST_STACK_REG
);
1596 /* On i386, reversed forms of subM3 and divM3 exist for
1597 MODE_FLOAT, so the same code that works for addM3 and mulM3
1601 /* These insns can accept the top of stack as a destination
1602 from a stack reg or mem, or can use the top of stack as a
1603 source and some other stack register (possibly top of stack)
1604 as a destination. */
1606 src1
= get_true_reg (&XEXP (pat_src
, 0));
1607 src2
= get_true_reg (&XEXP (pat_src
, 1));
1609 /* We will fix any death note later. */
1611 if (STACK_REG_P (*src1
))
1612 src1_note
= find_regno_note (insn
, REG_DEAD
, REGNO (*src1
));
1614 src1_note
= NULL_RTX
;
1615 if (STACK_REG_P (*src2
))
1616 src2_note
= find_regno_note (insn
, REG_DEAD
, REGNO (*src2
));
1618 src2_note
= NULL_RTX
;
1620 /* If either operand is not a stack register, then the dest
1621 must be top of stack. */
1623 if (! STACK_REG_P (*src1
) || ! STACK_REG_P (*src2
))
1624 emit_swap_insn (insn
, regstack
, *dest
);
1627 /* Both operands are REG. If neither operand is already
1628 at the top of stack, choose to make the one that is the dest
1629 the new top of stack. */
1631 int src1_hard_regnum
, src2_hard_regnum
;
1633 src1_hard_regnum
= get_hard_regnum (regstack
, *src1
);
1634 src2_hard_regnum
= get_hard_regnum (regstack
, *src2
);
1635 if (src1_hard_regnum
== -1 || src2_hard_regnum
== -1)
1638 if (src1_hard_regnum
!= FIRST_STACK_REG
1639 && src2_hard_regnum
!= FIRST_STACK_REG
)
1640 emit_swap_insn (insn
, regstack
, *dest
);
1643 if (STACK_REG_P (*src1
))
1644 replace_reg (src1
, get_hard_regnum (regstack
, *src1
));
1645 if (STACK_REG_P (*src2
))
1646 replace_reg (src2
, get_hard_regnum (regstack
, *src2
));
1650 rtx src1_reg
= XEXP (src1_note
, 0);
1652 /* If the register that dies is at the top of stack, then
1653 the destination is somewhere else - merely substitute it.
1654 But if the reg that dies is not at top of stack, then
1655 move the top of stack to the dead reg, as though we had
1656 done the insn and then a store-with-pop. */
1658 if (REGNO (src1_reg
) == regstack
->reg
[regstack
->top
])
1660 SET_HARD_REG_BIT (regstack
->reg_set
, REGNO (*dest
));
1661 replace_reg (dest
, get_hard_regnum (regstack
, *dest
));
1665 int regno
= get_hard_regnum (regstack
, src1_reg
);
1667 SET_HARD_REG_BIT (regstack
->reg_set
, REGNO (*dest
));
1668 replace_reg (dest
, regno
);
1670 regstack
->reg
[regstack
->top
- (regno
- FIRST_STACK_REG
)]
1671 = regstack
->reg
[regstack
->top
];
1674 CLEAR_HARD_REG_BIT (regstack
->reg_set
,
1675 REGNO (XEXP (src1_note
, 0)));
1676 replace_reg (&XEXP (src1_note
, 0), FIRST_STACK_REG
);
1681 rtx src2_reg
= XEXP (src2_note
, 0);
1682 if (REGNO (src2_reg
) == regstack
->reg
[regstack
->top
])
1684 SET_HARD_REG_BIT (regstack
->reg_set
, REGNO (*dest
));
1685 replace_reg (dest
, get_hard_regnum (regstack
, *dest
));
1689 int regno
= get_hard_regnum (regstack
, src2_reg
);
1691 SET_HARD_REG_BIT (regstack
->reg_set
, REGNO (*dest
));
1692 replace_reg (dest
, regno
);
1694 regstack
->reg
[regstack
->top
- (regno
- FIRST_STACK_REG
)]
1695 = regstack
->reg
[regstack
->top
];
1698 CLEAR_HARD_REG_BIT (regstack
->reg_set
,
1699 REGNO (XEXP (src2_note
, 0)));
1700 replace_reg (&XEXP (src2_note
, 0), FIRST_STACK_REG
);
1705 SET_HARD_REG_BIT (regstack
->reg_set
, REGNO (*dest
));
1706 replace_reg (dest
, get_hard_regnum (regstack
, *dest
));
1709 /* Keep operand 1 maching with destination. */
1710 if (GET_RTX_CLASS (GET_CODE (pat_src
)) == 'c'
1711 && REG_P (*src1
) && REG_P (*src2
)
1712 && REGNO (*src1
) != REGNO (*dest
))
1714 int tmp
= REGNO (*src1
);
1715 replace_reg (src1
, REGNO (*src2
));
1716 replace_reg (src2
, tmp
);
1721 switch (XINT (pat_src
, 1))
1725 /* These insns only operate on the top of the stack. */
1727 src1
= get_true_reg (&XVECEXP (pat_src
, 0, 0));
1729 emit_swap_insn (insn
, regstack
, *src1
);
1731 src1_note
= find_regno_note (insn
, REG_DEAD
, REGNO (*src1
));
1733 if (STACK_REG_P (*dest
))
1734 replace_reg (dest
, FIRST_STACK_REG
);
1738 replace_reg (&XEXP (src1_note
, 0), FIRST_STACK_REG
);
1740 CLEAR_HARD_REG_BIT (regstack
->reg_set
, REGNO (*src1
));
1743 replace_reg (src1
, FIRST_STACK_REG
);
1747 /* (unspec [(unspec [(compare ..)] 9)] 10)
1748 Unspec 9 is fnstsw; unspec 10 is sahf. The combination
1749 matches the PPRO fcomi instruction. */
1751 pat_src
= XVECEXP (pat_src
, 0, 0);
1752 if (GET_CODE (pat_src
) != UNSPEC
1753 || XINT (pat_src
, 1) != 9)
1758 /* (unspec [(compare ..)] 9) */
1759 /* Combined fcomp+fnstsw generated for doing well with
1760 CSE. When optimizing this would have been broken
1763 pat_src
= XVECEXP (pat_src
, 0, 0);
1764 if (GET_CODE (pat_src
) != COMPARE
)
1767 compare_for_stack_reg (insn
, regstack
, pat_src
);
1776 /* This insn requires the top of stack to be the destination. */
1778 /* If the comparison operator is an FP comparison operator,
1779 it is handled correctly by compare_for_stack_reg () who
1780 will move the destination to the top of stack. But if the
1781 comparison operator is not an FP comparison operator, we
1782 have to handle it here. */
1783 if (get_hard_regnum (regstack
, *dest
) >= FIRST_STACK_REG
1784 && REGNO (*dest
) != regstack
->reg
[regstack
->top
])
1785 emit_swap_insn (insn
, regstack
, *dest
);
1787 src1
= get_true_reg (&XEXP (pat_src
, 1));
1788 src2
= get_true_reg (&XEXP (pat_src
, 2));
1790 src1_note
= find_regno_note (insn
, REG_DEAD
, REGNO (*src1
));
1791 src2_note
= find_regno_note (insn
, REG_DEAD
, REGNO (*src2
));
1798 src_note
[1] = src1_note
;
1799 src_note
[2] = src2_note
;
1801 if (STACK_REG_P (*src1
))
1802 replace_reg (src1
, get_hard_regnum (regstack
, *src1
));
1803 if (STACK_REG_P (*src2
))
1804 replace_reg (src2
, get_hard_regnum (regstack
, *src2
));
1806 for (i
= 1; i
<= 2; i
++)
1809 int regno
= REGNO (XEXP (src_note
[i
], 0));
1811 /* If the register that dies is not at the top of
1812 stack, then move the top of stack to the dead reg */
1813 if (regno
!= regstack
->reg
[regstack
->top
])
1815 remove_regno_note (insn
, REG_DEAD
, regno
);
1816 emit_pop_insn (insn
, regstack
, XEXP (src_note
[i
], 0),
1821 CLEAR_HARD_REG_BIT (regstack
->reg_set
, regno
);
1822 replace_reg (&XEXP (src_note
[i
], 0), FIRST_STACK_REG
);
1828 /* Make dest the top of stack. Add dest to regstack if
1830 if (get_hard_regnum (regstack
, *dest
) < FIRST_STACK_REG
)
1831 regstack
->reg
[++regstack
->top
] = REGNO (*dest
);
1832 SET_HARD_REG_BIT (regstack
->reg_set
, REGNO (*dest
));
1833 replace_reg (dest
, FIRST_STACK_REG
);
1847 /* Substitute hard regnums for any stack regs in INSN, which has
1848 N_INPUTS inputs and N_OUTPUTS outputs. REGSTACK is the stack info
1849 before the insn, and is updated with changes made here.
1851 There are several requirements and assumptions about the use of
1852 stack-like regs in asm statements. These rules are enforced by
1853 record_asm_stack_regs; see comments there for details. Any
1854 asm_operands left in the RTL at this point may be assume to meet the
1855 requirements, since record_asm_stack_regs removes any problem asm. */
1858 subst_asm_stack_regs (insn
, regstack
)
1862 rtx body
= PATTERN (insn
);
1865 rtx
*note_reg
; /* Array of note contents */
1866 rtx
**note_loc
; /* Address of REG field of each note */
1867 enum reg_note
*note_kind
; /* The type of each note */
1869 rtx
*clobber_reg
= 0;
1870 rtx
**clobber_loc
= 0;
1872 struct stack_def temp_stack
;
1877 int n_inputs
, n_outputs
;
1879 if (! check_asm_stack_operands (insn
))
1882 /* Find out what the constraints required. If no constraint
1883 alternative matches, that is a compiler bug: we should have caught
1884 such an insn in check_asm_stack_operands. */
1885 extract_insn (insn
);
1886 constrain_operands (1);
1887 alt
= which_alternative
;
1889 preprocess_constraints ();
1891 n_inputs
= get_asm_operand_n_inputs (body
);
1892 n_outputs
= recog_data
.n_operands
- n_inputs
;
1897 /* Strip SUBREGs here to make the following code simpler. */
1898 for (i
= 0; i
< recog_data
.n_operands
; i
++)
1899 if (GET_CODE (recog_data
.operand
[i
]) == SUBREG
1900 && GET_CODE (SUBREG_REG (recog_data
.operand
[i
])) == REG
)
1902 recog_data
.operand_loc
[i
] = & SUBREG_REG (recog_data
.operand
[i
]);
1903 recog_data
.operand
[i
] = SUBREG_REG (recog_data
.operand
[i
]);
1906 /* Set up NOTE_REG, NOTE_LOC and NOTE_KIND. */
1908 for (i
= 0, note
= REG_NOTES (insn
); note
; note
= XEXP (note
, 1))
1911 note_reg
= (rtx
*) alloca (i
* sizeof (rtx
));
1912 note_loc
= (rtx
**) alloca (i
* sizeof (rtx
*));
1913 note_kind
= (enum reg_note
*) alloca (i
* sizeof (enum reg_note
));
1916 for (note
= REG_NOTES (insn
); note
; note
= XEXP (note
, 1))
1918 rtx reg
= XEXP (note
, 0);
1919 rtx
*loc
= & XEXP (note
, 0);
1921 if (GET_CODE (reg
) == SUBREG
&& GET_CODE (SUBREG_REG (reg
)) == REG
)
1923 loc
= & SUBREG_REG (reg
);
1924 reg
= SUBREG_REG (reg
);
1927 if (STACK_REG_P (reg
)
1928 && (REG_NOTE_KIND (note
) == REG_DEAD
1929 || REG_NOTE_KIND (note
) == REG_UNUSED
))
1931 note_reg
[n_notes
] = reg
;
1932 note_loc
[n_notes
] = loc
;
1933 note_kind
[n_notes
] = REG_NOTE_KIND (note
);
1938 /* Set up CLOBBER_REG and CLOBBER_LOC. */
1942 if (GET_CODE (body
) == PARALLEL
)
1944 clobber_reg
= (rtx
*) alloca (XVECLEN (body
, 0) * sizeof (rtx
));
1945 clobber_loc
= (rtx
**) alloca (XVECLEN (body
, 0) * sizeof (rtx
*));
1947 for (i
= 0; i
< XVECLEN (body
, 0); i
++)
1948 if (GET_CODE (XVECEXP (body
, 0, i
)) == CLOBBER
)
1950 rtx clobber
= XVECEXP (body
, 0, i
);
1951 rtx reg
= XEXP (clobber
, 0);
1952 rtx
*loc
= & XEXP (clobber
, 0);
1954 if (GET_CODE (reg
) == SUBREG
&& GET_CODE (SUBREG_REG (reg
)) == REG
)
1956 loc
= & SUBREG_REG (reg
);
1957 reg
= SUBREG_REG (reg
);
1960 if (STACK_REG_P (reg
))
1962 clobber_reg
[n_clobbers
] = reg
;
1963 clobber_loc
[n_clobbers
] = loc
;
1969 temp_stack
= *regstack
;
1971 /* Put the input regs into the desired place in TEMP_STACK. */
1973 for (i
= n_outputs
; i
< n_outputs
+ n_inputs
; i
++)
1974 if (STACK_REG_P (recog_data
.operand
[i
])
1975 && reg_class_subset_p (recog_op_alt
[i
][alt
].class,
1977 && recog_op_alt
[i
][alt
].class != FLOAT_REGS
)
1979 /* If an operand needs to be in a particular reg in
1980 FLOAT_REGS, the constraint was either 't' or 'u'. Since
1981 these constraints are for single register classes, and
1982 reload guaranteed that operand[i] is already in that class,
1983 we can just use REGNO (recog_data.operand[i]) to know which
1984 actual reg this operand needs to be in. */
1986 int regno
= get_hard_regnum (&temp_stack
, recog_data
.operand
[i
]);
1991 if ((unsigned int) regno
!= REGNO (recog_data
.operand
[i
]))
1993 /* recog_data.operand[i] is not in the right place. Find
1994 it and swap it with whatever is already in I's place.
1995 K is where recog_data.operand[i] is now. J is where it
1999 k
= temp_stack
.top
- (regno
- FIRST_STACK_REG
);
2001 - (REGNO (recog_data
.operand
[i
]) - FIRST_STACK_REG
));
2003 temp
= temp_stack
.reg
[k
];
2004 temp_stack
.reg
[k
] = temp_stack
.reg
[j
];
2005 temp_stack
.reg
[j
] = temp
;
2009 /* Emit insns before INSN to make sure the reg-stack is in the right
2012 change_stack (insn
, regstack
, &temp_stack
, EMIT_BEFORE
);
2014 /* Make the needed input register substitutions. Do death notes and
2015 clobbers too, because these are for inputs, not outputs. */
2017 for (i
= n_outputs
; i
< n_outputs
+ n_inputs
; i
++)
2018 if (STACK_REG_P (recog_data
.operand
[i
]))
2020 int regnum
= get_hard_regnum (regstack
, recog_data
.operand
[i
]);
2025 replace_reg (recog_data
.operand_loc
[i
], regnum
);
2028 for (i
= 0; i
< n_notes
; i
++)
2029 if (note_kind
[i
] == REG_DEAD
)
2031 int regnum
= get_hard_regnum (regstack
, note_reg
[i
]);
2036 replace_reg (note_loc
[i
], regnum
);
2039 for (i
= 0; i
< n_clobbers
; i
++)
2041 /* It's OK for a CLOBBER to reference a reg that is not live.
2042 Don't try to replace it in that case. */
2043 int regnum
= get_hard_regnum (regstack
, clobber_reg
[i
]);
2047 /* Sigh - clobbers always have QImode. But replace_reg knows
2048 that these regs can't be MODE_INT and will abort. Just put
2049 the right reg there without calling replace_reg. */
2051 *clobber_loc
[i
] = FP_MODE_REG (regnum
, DFmode
);
2055 /* Now remove from REGSTACK any inputs that the asm implicitly popped. */
2057 for (i
= n_outputs
; i
< n_outputs
+ n_inputs
; i
++)
2058 if (STACK_REG_P (recog_data
.operand
[i
]))
2060 /* An input reg is implicitly popped if it is tied to an
2061 output, or if there is a CLOBBER for it. */
2064 for (j
= 0; j
< n_clobbers
; j
++)
2065 if (operands_match_p (clobber_reg
[j
], recog_data
.operand
[i
]))
2068 if (j
< n_clobbers
|| recog_op_alt
[i
][alt
].matches
>= 0)
2070 /* recog_data.operand[i] might not be at the top of stack.
2071 But that's OK, because all we need to do is pop the
2072 right number of regs off of the top of the reg-stack.
2073 record_asm_stack_regs guaranteed that all implicitly
2074 popped regs were grouped at the top of the reg-stack. */
2076 CLEAR_HARD_REG_BIT (regstack
->reg_set
,
2077 regstack
->reg
[regstack
->top
]);
2082 /* Now add to REGSTACK any outputs that the asm implicitly pushed.
2083 Note that there isn't any need to substitute register numbers.
2084 ??? Explain why this is true. */
2086 for (i
= LAST_STACK_REG
; i
>= FIRST_STACK_REG
; i
--)
2088 /* See if there is an output for this hard reg. */
2091 for (j
= 0; j
< n_outputs
; j
++)
2092 if (STACK_REG_P (recog_data
.operand
[j
])
2093 && REGNO (recog_data
.operand
[j
]) == (unsigned) i
)
2095 regstack
->reg
[++regstack
->top
] = i
;
2096 SET_HARD_REG_BIT (regstack
->reg_set
, i
);
2101 /* Now emit a pop insn for any REG_UNUSED output, or any REG_DEAD
2102 input that the asm didn't implicitly pop. If the asm didn't
2103 implicitly pop an input reg, that reg will still be live.
2105 Note that we can't use find_regno_note here: the register numbers
2106 in the death notes have already been substituted. */
2108 for (i
= 0; i
< n_outputs
; i
++)
2109 if (STACK_REG_P (recog_data
.operand
[i
]))
2113 for (j
= 0; j
< n_notes
; j
++)
2114 if (REGNO (recog_data
.operand
[i
]) == REGNO (note_reg
[j
])
2115 && note_kind
[j
] == REG_UNUSED
)
2117 insn
= emit_pop_insn (insn
, regstack
, recog_data
.operand
[i
],
2123 for (i
= n_outputs
; i
< n_outputs
+ n_inputs
; i
++)
2124 if (STACK_REG_P (recog_data
.operand
[i
]))
2128 for (j
= 0; j
< n_notes
; j
++)
2129 if (REGNO (recog_data
.operand
[i
]) == REGNO (note_reg
[j
])
2130 && note_kind
[j
] == REG_DEAD
2131 && TEST_HARD_REG_BIT (regstack
->reg_set
,
2132 REGNO (recog_data
.operand
[i
])))
2134 insn
= emit_pop_insn (insn
, regstack
, recog_data
.operand
[i
],
2141 /* Substitute stack hard reg numbers for stack virtual registers in
2142 INSN. Non-stack register numbers are not changed. REGSTACK is the
2143 current stack content. Insns may be emitted as needed to arrange the
2144 stack for the 387 based on the contents of the insn. */
2147 subst_stack_regs (insn
, regstack
)
2151 register rtx
*note_link
, note
;
2154 if (GET_CODE (insn
) == CALL_INSN
)
2156 int top
= regstack
->top
;
2158 /* If there are any floating point parameters to be passed in
2159 registers for this call, make sure they are in the right
2164 straighten_stack (PREV_INSN (insn
), regstack
);
2166 /* Now mark the arguments as dead after the call. */
2168 while (regstack
->top
>= 0)
2170 CLEAR_HARD_REG_BIT (regstack
->reg_set
, FIRST_STACK_REG
+ regstack
->top
);
2176 /* Do the actual substitution if any stack regs are mentioned.
2177 Since we only record whether entire insn mentions stack regs, and
2178 subst_stack_regs_pat only works for patterns that contain stack regs,
2179 we must check each pattern in a parallel here. A call_value_pop could
2182 if (stack_regs_mentioned (insn
))
2184 int n_operands
= asm_noperands (PATTERN (insn
));
2185 if (n_operands
>= 0)
2187 /* This insn is an `asm' with operands. Decode the operands,
2188 decide how many are inputs, and do register substitution.
2189 Any REG_UNUSED notes will be handled by subst_asm_stack_regs. */
2191 subst_asm_stack_regs (insn
, regstack
);
2195 if (GET_CODE (PATTERN (insn
)) == PARALLEL
)
2196 for (i
= 0; i
< XVECLEN (PATTERN (insn
), 0); i
++)
2198 if (stack_regs_mentioned_p (XVECEXP (PATTERN (insn
), 0, i
)))
2199 subst_stack_regs_pat (insn
, regstack
,
2200 XVECEXP (PATTERN (insn
), 0, i
));
2203 subst_stack_regs_pat (insn
, regstack
, PATTERN (insn
));
2206 /* subst_stack_regs_pat may have deleted a no-op insn. If so, any
2207 REG_UNUSED will already have been dealt with, so just return. */
2209 if (GET_CODE (insn
) == NOTE
)
2212 /* If there is a REG_UNUSED note on a stack register on this insn,
2213 the indicated reg must be popped. The REG_UNUSED note is removed,
2214 since the form of the newly emitted pop insn references the reg,
2215 making it no longer `unset'. */
2217 note_link
= ®_NOTES(insn
);
2218 for (note
= *note_link
; note
; note
= XEXP (note
, 1))
2219 if (REG_NOTE_KIND (note
) == REG_UNUSED
&& STACK_REG_P (XEXP (note
, 0)))
2221 *note_link
= XEXP (note
, 1);
2222 insn
= emit_pop_insn (insn
, regstack
, XEXP (note
, 0), EMIT_AFTER
);
2225 note_link
= &XEXP (note
, 1);
2228 /* Change the organization of the stack so that it fits a new basic
2229 block. Some registers might have to be popped, but there can never be
2230 a register live in the new block that is not now live.
2232 Insert any needed insns before or after INSN, as indicated by
2233 WHERE. OLD is the original stack layout, and NEW is the desired
2234 form. OLD is updated to reflect the code emitted, ie, it will be
2235 the same as NEW upon return.
2237 This function will not preserve block_end[]. But that information
2238 is no longer needed once this has executed. */
2241 change_stack (insn
, old
, new, where
)
2245 enum emit_where where
;
2250 /* We will be inserting new insns "backwards". If we are to insert
2251 after INSN, find the next insn, and insert before it. */
2253 if (where
== EMIT_AFTER
)
2255 if (current_block
&& current_block
->end
== insn
)
2257 insn
= NEXT_INSN (insn
);
2260 /* Pop any registers that are not needed in the new block. */
2262 for (reg
= old
->top
; reg
>= 0; reg
--)
2263 if (! TEST_HARD_REG_BIT (new->reg_set
, old
->reg
[reg
]))
2264 emit_pop_insn (insn
, old
, FP_MODE_REG (old
->reg
[reg
], DFmode
),
2269 /* If the new block has never been processed, then it can inherit
2270 the old stack order. */
2272 new->top
= old
->top
;
2273 memcpy (new->reg
, old
->reg
, sizeof (new->reg
));
2277 /* This block has been entered before, and we must match the
2278 previously selected stack order. */
2280 /* By now, the only difference should be the order of the stack,
2281 not their depth or liveliness. */
2283 GO_IF_HARD_REG_EQUAL (old
->reg_set
, new->reg_set
, win
);
2286 if (old
->top
!= new->top
)
2289 /* If the stack is not empty (new->top != -1), loop here emitting
2290 swaps until the stack is correct.
2292 The worst case number of swaps emitted is N + 2, where N is the
2293 depth of the stack. In some cases, the reg at the top of
2294 stack may be correct, but swapped anyway in order to fix
2295 other regs. But since we never swap any other reg away from
2296 its correct slot, this algorithm will converge. */
2301 /* Swap the reg at top of stack into the position it is
2302 supposed to be in, until the correct top of stack appears. */
2304 while (old
->reg
[old
->top
] != new->reg
[new->top
])
2306 for (reg
= new->top
; reg
>= 0; reg
--)
2307 if (new->reg
[reg
] == old
->reg
[old
->top
])
2313 emit_swap_insn (insn
, old
,
2314 FP_MODE_REG (old
->reg
[reg
], DFmode
));
2317 /* See if any regs remain incorrect. If so, bring an
2318 incorrect reg to the top of stack, and let the while loop
2321 for (reg
= new->top
; reg
>= 0; reg
--)
2322 if (new->reg
[reg
] != old
->reg
[reg
])
2324 emit_swap_insn (insn
, old
,
2325 FP_MODE_REG (old
->reg
[reg
], DFmode
));
2330 /* At this point there must be no differences. */
2332 for (reg
= old
->top
; reg
>= 0; reg
--)
2333 if (old
->reg
[reg
] != new->reg
[reg
])
2338 current_block
->end
= PREV_INSN (insn
);
2341 /* Print stack configuration. */
2344 print_stack (file
, s
)
2352 fprintf (file
, "uninitialized\n");
2353 else if (s
->top
== -1)
2354 fprintf (file
, "empty\n");
2359 for (i
= 0; i
<= s
->top
; ++i
)
2360 fprintf (file
, "%d ", s
->reg
[i
]);
2361 fputs ("]\n", file
);
2365 /* This function was doing life analysis. We now let the regular live
2366 code do it's job, so we only need to check some extra invariants
2367 that reg-stack expects. Primary among these being that all registers
2368 are initialized before use.
2370 The function returns true when code was emitted to CFG edges and
2371 commit_edge_insertions needs to be called. */
2374 convert_regs_entry ()
2376 int inserted
= 0, i
;
2379 for (i
= n_basic_blocks
- 1; i
>= 0; --i
)
2381 basic_block block
= BASIC_BLOCK (i
);
2382 block_info bi
= BLOCK_INFO (block
);
2385 /* Set current register status at last instruction `uninitialized'. */
2386 bi
->stack_in
.top
= -2;
2388 /* Copy live_at_end and live_at_start into temporaries. */
2389 for (reg
= FIRST_STACK_REG
; reg
<= LAST_STACK_REG
; reg
++)
2391 if (REGNO_REG_SET_P (block
->global_live_at_end
, reg
))
2392 SET_HARD_REG_BIT (bi
->out_reg_set
, reg
);
2393 if (REGNO_REG_SET_P (block
->global_live_at_start
, reg
))
2394 SET_HARD_REG_BIT (bi
->stack_in
.reg_set
, reg
);
2398 /* Load something into each stack register live at function entry.
2399 Such live registers can be caused by uninitialized variables or
2400 functions not returning values on all paths. In order to keep
2401 the push/pop code happy, and to not scrog the register stack, we
2402 must put something in these registers. Use a QNaN.
2404 Note that we are insertting converted code here. This code is
2405 never seen by the convert_regs pass. */
2407 for (e
= ENTRY_BLOCK_PTR
->succ
; e
; e
= e
->succ_next
)
2409 basic_block block
= e
->dest
;
2410 block_info bi
= BLOCK_INFO (block
);
2413 for (reg
= LAST_STACK_REG
; reg
>= FIRST_STACK_REG
; --reg
)
2414 if (TEST_HARD_REG_BIT (bi
->stack_in
.reg_set
, reg
))
2418 bi
->stack_in
.reg
[++top
] = reg
;
2420 init
= gen_rtx_SET (VOIDmode
,
2421 FP_MODE_REG (FIRST_STACK_REG
, SFmode
),
2423 insert_insn_on_edge (init
, e
);
2427 bi
->stack_in
.top
= top
;
2433 /* Construct the desired stack for function exit. This will either
2434 be `empty', or the function return value at top-of-stack. */
2437 convert_regs_exit ()
2439 int value_reg_low
, value_reg_high
;
2443 retvalue
= stack_result (current_function_decl
);
2444 value_reg_low
= value_reg_high
= -1;
2447 value_reg_low
= REGNO (retvalue
);
2448 value_reg_high
= value_reg_low
2449 + HARD_REGNO_NREGS (value_reg_low
, GET_MODE (retvalue
)) - 1;
2452 output_stack
= &BLOCK_INFO (EXIT_BLOCK_PTR
)->stack_in
;
2453 if (value_reg_low
== -1)
2454 output_stack
->top
= -1;
2459 output_stack
->top
= value_reg_high
- value_reg_low
;
2460 for (reg
= value_reg_low
; reg
<= value_reg_high
; ++reg
)
2462 output_stack
->reg
[reg
- value_reg_low
] = reg
;
2463 SET_HARD_REG_BIT (output_stack
->reg_set
, reg
);
2468 /* Adjust the stack of this block on exit to match the stack of the
2469 target block, or copy stack info into the stack of the successor
2470 of the successor hasn't been processed yet. */
2472 compensate_edge (e
, file
)
2476 basic_block block
= e
->src
, target
= e
->dest
;
2477 block_info bi
= BLOCK_INFO (block
);
2478 struct stack_def regstack
, tmpstack
;
2479 stack target_stack
= &BLOCK_INFO (target
)->stack_in
;
2482 current_block
= block
;
2483 regstack
= bi
->stack_out
;
2485 fprintf (file
, "Edge %d->%d: ", block
->index
, target
->index
);
2487 if (target_stack
->top
== -2)
2489 /* The target block hasn't had a stack order selected.
2490 We need merely ensure that no pops are needed. */
2491 for (reg
= regstack
.top
; reg
>= 0; --reg
)
2492 if (!TEST_HARD_REG_BIT (target_stack
->reg_set
, regstack
.reg
[reg
]))
2498 fprintf (file
, "new block; copying stack position\n");
2500 /* change_stack kills values in regstack. */
2501 tmpstack
= regstack
;
2503 change_stack (block
->end
, &tmpstack
, target_stack
, EMIT_AFTER
);
2508 fprintf (file
, "new block; pops needed\n");
2512 if (target_stack
->top
== regstack
.top
)
2514 for (reg
= target_stack
->top
; reg
>= 0; --reg
)
2515 if (target_stack
->reg
[reg
] != regstack
.reg
[reg
])
2521 fprintf (file
, "no changes needed\n");
2528 fprintf (file
, "correcting stack to ");
2529 print_stack (file
, target_stack
);
2533 /* Care for non-call EH edges specially. The normal return path have
2534 values in registers. These will be popped en masse by the unwind
2536 if ((e
->flags
& (EDGE_EH
| EDGE_ABNORMAL_CALL
)) == EDGE_EH
)
2537 target_stack
->top
= -1;
2539 /* Other calls may appear to have values live in st(0), but the
2540 abnormal return path will not have actually loaded the values. */
2541 else if (e
->flags
& EDGE_ABNORMAL_CALL
)
2543 /* Assert that the lifetimes are as we expect -- one value
2544 live at st(0) on the end of the source block, and no
2545 values live at the beginning of the destination block. */
2548 CLEAR_HARD_REG_SET (tmp
);
2549 GO_IF_HARD_REG_EQUAL (target_stack
->reg_set
, tmp
, eh1
);
2553 SET_HARD_REG_BIT (tmp
, FIRST_STACK_REG
);
2554 GO_IF_HARD_REG_EQUAL (regstack
.reg_set
, tmp
, eh2
);
2558 target_stack
->top
= -1;
2561 /* It is better to output directly to the end of the block
2562 instead of to the edge, because emit_swap can do minimal
2563 insn scheduling. We can do this when there is only one
2564 edge out, and it is not abnormal. */
2565 else if (block
->succ
->succ_next
== NULL
&& !(e
->flags
& EDGE_ABNORMAL
))
2567 /* change_stack kills values in regstack. */
2568 tmpstack
= regstack
;
2570 change_stack (block
->end
, &tmpstack
, target_stack
,
2571 (GET_CODE (block
->end
) == JUMP_INSN
2572 ? EMIT_BEFORE
: EMIT_AFTER
));
2578 /* We don't support abnormal edges. Global takes care to
2579 avoid any live register across them, so we should never
2580 have to insert instructions on such edges. */
2581 if (e
->flags
& EDGE_ABNORMAL
)
2584 current_block
= NULL
;
2587 /* ??? change_stack needs some point to emit insns after.
2588 Also needed to keep gen_sequence from returning a
2589 pattern as opposed to a sequence, which would lose
2591 after
= emit_note (NULL
, NOTE_INSN_DELETED
);
2593 tmpstack
= regstack
;
2594 change_stack (after
, &tmpstack
, target_stack
, EMIT_BEFORE
);
2596 seq
= gen_sequence ();
2599 insert_insn_on_edge (seq
, e
);
2605 /* Convert stack register references in one block. */
2608 convert_regs_1 (file
, block
)
2612 struct stack_def regstack
;
2613 block_info bi
= BLOCK_INFO (block
);
2616 edge e
, beste
= NULL
;
2620 /* Find the edge we will copy stack from. It should be the most frequent
2621 one as it will get cheapest after compensation code is generated,
2622 if multiple such exists, take one with largest count, preffer critical
2623 one (as splitting critical edges is more expensive), or one with lowest
2624 index, to avoid random changes with different orders of the edges. */
2625 for (e
= block
->pred
; e
; e
= e
->pred_next
)
2627 if (e
->flags
& EDGE_DFS_BACK
)
2631 else if (EDGE_FREQUENCY (beste
) < EDGE_FREQUENCY (e
))
2633 else if (EDGE_FREQUENCY (beste
) > EDGE_FREQUENCY (e
))
2635 else if (beste
->count
< e
->count
)
2637 else if (beste
->count
> e
->count
)
2639 else if ((e
->flags
& EDGE_CRITICAL
) != (beste
->flags
& EDGE_CRITICAL
))
2641 if (e
->flags
& EDGE_CRITICAL
)
2644 else if (e
->src
->index
< beste
->src
->index
)
2648 /* Entry block does have stack already initialized. */
2649 if (bi
->stack_in
.top
== -2)
2650 inserted
|= compensate_edge (beste
, file
);
2654 current_block
= block
;
2658 fprintf (file
, "\nBasic block %d\nInput stack: ", block
->index
);
2659 print_stack (file
, &bi
->stack_in
);
2662 /* Process all insns in this block. Keep track of NEXT so that we
2663 don't process insns emitted while substituting in INSN. */
2665 regstack
= bi
->stack_in
;
2669 next
= NEXT_INSN (insn
);
2671 /* Ensure we have not missed a block boundary. */
2674 if (insn
== block
->end
)
2677 /* Don't bother processing unless there is a stack reg
2678 mentioned or if it's a CALL_INSN. */
2679 if (stack_regs_mentioned (insn
)
2680 || GET_CODE (insn
) == CALL_INSN
)
2684 fprintf (file
, " insn %d input stack: ",
2686 print_stack (file
, ®stack
);
2688 subst_stack_regs (insn
, ®stack
);
2695 fprintf (file
, "Expected live registers [");
2696 for (reg
= FIRST_STACK_REG
; reg
<= LAST_STACK_REG
; ++reg
)
2697 if (TEST_HARD_REG_BIT (bi
->out_reg_set
, reg
))
2698 fprintf (file
, " %d", reg
);
2699 fprintf (file
, " ]\nOutput stack: ");
2700 print_stack (file
, ®stack
);
2704 if (GET_CODE (insn
) == JUMP_INSN
)
2705 insn
= PREV_INSN (insn
);
2707 /* If the function is declared to return a value, but it returns one
2708 in only some cases, some registers might come live here. Emit
2709 necessary moves for them. */
2711 for (reg
= FIRST_STACK_REG
; reg
<= LAST_STACK_REG
; ++reg
)
2713 if (TEST_HARD_REG_BIT (bi
->out_reg_set
, reg
)
2714 && ! TEST_HARD_REG_BIT (regstack
.reg_set
, reg
))
2720 fprintf (file
, "Emitting insn initializing reg %d\n",
2724 set
= gen_rtx_SET (VOIDmode
, FP_MODE_REG (reg
, SFmode
),
2726 insn
= emit_block_insn_after (set
, insn
, block
);
2727 subst_stack_regs (insn
, ®stack
);
2731 /* Something failed if the stack lives don't match. */
2732 GO_IF_HARD_REG_EQUAL (regstack
.reg_set
, bi
->out_reg_set
, win
);
2735 bi
->stack_out
= regstack
;
2737 /* Compensate the back edges, as those wasn't visited yet. */
2738 for (e
= block
->succ
; e
; e
= e
->succ_next
)
2740 if (e
->flags
& EDGE_DFS_BACK
2741 || (e
->dest
== EXIT_BLOCK_PTR
))
2743 if (!BLOCK_INFO (e
->dest
)->done
2744 && e
->dest
!= block
)
2746 inserted
|= compensate_edge (e
, file
);
2749 for (e
= block
->pred
; e
; e
= e
->pred_next
)
2751 if (e
!= beste
&& !(e
->flags
& EDGE_DFS_BACK
)
2752 && e
->src
!= ENTRY_BLOCK_PTR
)
2754 if (!BLOCK_INFO (e
->src
)->done
)
2756 inserted
|= compensate_edge (e
, file
);
2763 /* Convert registers in all blocks reachable from BLOCK. */
2766 convert_regs_2 (file
, block
)
2770 basic_block
*stack
, *sp
;
2773 stack
= (basic_block
*) xmalloc (sizeof (*stack
) * n_basic_blocks
);
2784 inserted
|= convert_regs_1 (file
, block
);
2785 BLOCK_INFO (block
)->done
= 1;
2787 for (e
= block
->succ
; e
; e
= e
->succ_next
)
2788 if (! (e
->flags
& EDGE_DFS_BACK
))
2790 BLOCK_INFO (e
->dest
)->predecesors
--;
2791 if (!BLOCK_INFO (e
->dest
)->predecesors
)
2795 while (sp
!= stack
);
2800 /* Traverse all basic blocks in a function, converting the register
2801 references in each insn from the "flat" register file that gcc uses,
2802 to the stack-like registers the 387 uses. */
2811 /* Initialize uninitialized registers on function entry. */
2812 inserted
= convert_regs_entry ();
2814 /* Construct the desired stack for function exit. */
2815 convert_regs_exit ();
2816 BLOCK_INFO (EXIT_BLOCK_PTR
)->done
= 1;
2818 /* ??? Future: process inner loops first, and give them arbitrary
2819 initial stacks which emit_swap_insn can modify. This ought to
2820 prevent double fxch that aften appears at the head of a loop. */
2822 /* Process all blocks reachable from all entry points. */
2823 for (e
= ENTRY_BLOCK_PTR
->succ
; e
; e
= e
->succ_next
)
2824 inserted
|= convert_regs_2 (file
, e
->dest
);
2826 /* ??? Process all unreachable blocks. Though there's no excuse
2827 for keeping these even when not optimizing. */
2828 for (i
= 0; i
< n_basic_blocks
; ++i
)
2830 basic_block b
= BASIC_BLOCK (i
);
2831 block_info bi
= BLOCK_INFO (b
);
2837 /* Create an arbitrary input stack. */
2838 bi
->stack_in
.top
= -1;
2839 for (reg
= LAST_STACK_REG
; reg
>= FIRST_STACK_REG
; --reg
)
2840 if (TEST_HARD_REG_BIT (bi
->stack_in
.reg_set
, reg
))
2841 bi
->stack_in
.reg
[++bi
->stack_in
.top
] = reg
;
2843 inserted
|= convert_regs_2 (file
, b
);
2848 commit_edge_insertions ();
2855 #endif /* STACK_REGS */