Add support for large prefixed address in adjusting a vector address.
[official-gcc.git] / gcc / ChangeLog
blobb2e6d8504b565cd98e34e89d9514b727f2d415fe
1 2020-01-06  Michael Meissner  <meissner@linux.ibm.com>
3         * config/rs6000/rs6000.c (rs6000_adjust_vec_address): Add support
4         for the offset being 34-bits when -mcpu=future is used.
6 2020-01-06  John David Anglin  <danglin@gcc.gnu.org>
8         * config/pa/pa.md: Revert change to use ordered_comparison_operator
9         instead of cmpib_comparison_operator in cmpib patterns.
10         * config/pa/predicates.md (cmpib_comparison_operator): Revert removal
11         of cmpib_comparison_operator.  Revise comment.
13 2020-01-06  Richard Sandiford  <richard.sandiford@arm.com>
15         * tree-vect-slp.c (vect_build_slp_tree_1): Require all shifts
16         in an IFN_DIV_POW2 node to be equal.
18 2020-01-06  Richard Sandiford  <richard.sandiford@arm.com>
20         * tree-vect-stmts.c (vect_check_load_store_mask): Rename to...
21         (vect_check_scalar_mask): ...this.
22         (vectorizable_store, vectorizable_load): Update call accordingly.
23         (vectorizable_call): Use vect_check_scalar_mask to check the mask
24         argument in calls to conditional internal functions.
26 2020-01-06  Andrew Stubbs  <ams@codesourcery.com>
28         * config/gcn/gcn-valu.md (subv64di3): Use separate alternatives for
29         '0' matching inputs.
30         (subv64di3_exec): Likewise.
32 2020-01-06  Bryan Stenson  <bryan@siliconvortex.com>
34         * config/mips/mips.c (vr4130_align_insns): Fix typo.
35         * doc/md.texi (movstr): Likewise.
37 2020-01-06  Andrew Stubbs  <ams@codesourcery.com>
39         * config/gcn/gcn-valu.md (vec_extract<mode><scalar_mode>): Add early
40         clobber.
42 2020-01-06  Richard Sandiford  <richard.sandiford@arm.com>
44         * config/aarch64/t-aarch64 ($(srcdir)/config/aarch64/aarch64-tune.md):
45         Depend on...
46         (s-aarch64-tune-md): ...this new stamp file.  Pipe the new contents
47         to a temporary file and use move-if-change to update the real
48         file where necessary.
50 2020-01-06  Richard Sandiford  <richard.sandiford@arm.com>
52         * config/aarch64/aarch64-sve.md (@aarch64_sel_dup<mode>): Use Upl
53         rather than Upa for CPY /M.
55 2020-01-06  Andrew Stubbs  <ams@codesourcery.com>
57         * config/gcn/gcn.c (gcn_inline_constant_p): Allow 64 as an inline
58         immediate.
60 2020-01-06  Martin Liska  <mliska@suse.cz>
62     PR tree-optimization/92860
63     * params.opt: Mark param_max_combine_insns with Optimization
64     keyword. 
66 2020-01-05  Jakub Jelinek  <jakub@redhat.com>
68         PR target/93141
69         * config/i386/i386.md (SWIDWI): New mode iterator.
70         (DWI, dwi): Add TImode variants.
71         (addv<mode>4): Use SWIDWI iterator instead of SWI.  Use
72         <general_hilo_operand> instead of <general_operand>.  Use
73         CONST_SCALAR_INT_P instead of CONST_INT_P.
74         (*addv<mode>4_1): Rename to ...
75         (addv<mode>4_1): ... this.
76         (QWI): New mode attribute.
77         (*addv<dwi>4_doubleword, *addv<dwi>4_doubleword_1): New
78         define_insn_and_split patterns.
79         (*addv<mode>4_overflow_1, *addv<mode>4_overflow_2): New define_insn
80         patterns.
81         (uaddv<mode>4): Use SWIDWI iterator instead of SWI.  Use
82         <general_hilo_operand> instead of <general_operand>.
83         (*addcarry<mode>_1): New define_insn.
84         (*add<dwi>3_doubleword_cc_overflow_1): New define_insn_and_split.
86 2020-01-03  Konstantin Kharlamov  <Hi-Angel@yandex.ru>
88         * gdbinit.in (pr, prl, pt, pct, pgg, pgq, pgs, pge, pmz, pdd, pbs, pbm):
89         Use "call" instead of "set".
91 2020-01-03  Martin Jambor  <mjambor@suse.cz>
93         PR ipa/92917
94         * ipa-cp.c (print_all_lattices): Skip functions without info.
96 2020-01-03  Jakub Jelinek  <jakub@redhat.com>
98         PR target/93089
99         * config/i386/i386-options.c (ix86_simd_clone_adjust): If
100         TARGET_PREFER_AVX128, use prefer-vector-width=256 for 'c' and 'd'
101         simd clones.  If TARGET_PREFER_AVX256, use prefer-vector-width=512
102         for 'e' simd clones.
104         PR target/93089
105         * config/i386/i386.opt (x_prefer_vector_width_type): Remove TargetSave
106         entry.
107         (mprefer-vector-width=): Add Save.
108         * config/i386/i386-options.c (ix86_target_string): Add PVW argument, print
109         -mprefer-vector-width= if non-zero.  Fix up -mfpmath= comment.
110         (ix86_debug_options, ix86_function_specific_print): Adjust
111         ix86_target_string callers.
112         (ix86_valid_target_attribute_inner_p): Handle prefer-vector-width=.
113         (ix86_valid_target_attribute_tree): Likewise.
114         * config/i386/i386-options.h (ix86_target_string): Add PVW argument.
115         * config/i386/i386-expand.c (ix86_expand_builtin): Adjust
116         ix86_target_string caller.
118         PR target/93110
119         * config/i386/i386.md (abs<mode>2): Use expand_simple_binop instead of
120         emitting ASHIFTRT, XOR and MINUS by hand.  Use gen_int_mode with QImode
121         instead of gen_int_shift_amount + convert_modes.
123         PR rtl-optimization/93088
124         * loop-iv.c (find_single_def_src): Punt after looking through
125         128 reg copies for regs with single definitions.  Move definitions
126         to first uses.
128 2020-01-02  Dennis Zhang  <dennis.zhang@arm.com>
130         * config/arm/arm-c.c (arm_cpu_builtins): Define
131         __ARM_FEATURE_MATMUL_INT8, __ARM_FEATURE_BF16_VECTOR_ARITHMETIC,
132         __ARM_FEATURE_BF16_SCALAR_ARITHMETIC, and
133         __ARM_BF16_FORMAT_ALTERNATIVE when enabled.
134         * config/arm/arm-cpus.in (armv8_6, i8mm, bf16): New features.
135         * config/arm/arm-tables.opt: Regenerated.
136         * config/arm/arm.c (arm_option_reconfigure_globals): Initialize
137         arm_arch_i8mm and arm_arch_bf16 when enabled.
138         * config/arm/arm.h (TARGET_I8MM): New macro.
139         (TARGET_BF16_FP, TARGET_BF16_SIMD): Likewise.
140         * config/arm/t-aprofile: Add matching rules for -march=armv8.6-a.
141         * config/arm/t-arm-elf (all_v8_archs): Add armv8.6-a.
142         * config/arm/t-multilib: Add matching rules for -march=armv8.6-a.
143         (v8_6_a_simd_variants): New.
144         (v8_*_a_simd_variants): Add i8mm and bf16.
145         * doc/invoke.texi (armv8.6-a, i8mm, bf16): Document new options.
147 2020-01-02  Jakub Jelinek  <jakub@redhat.com>
149         PR ipa/93087
150         * predict.c (compute_function_frequency): Don't call
151         warn_function_cold on functions that already have cold attribute.
153 2020-01-01  John David Anglin  <danglin@gcc.gnu.org>
155         PR target/67834
156         * config/pa/pa.c (pa_elf_select_rtx_section): New.  Put references to
157         COMDAT group function labels in .data.rel.ro.local section.
158         * config/pa/pa32-linux.h (TARGET_ASM_SELECT_RTX_SECTION): Define.
160         PR target/93111
161         * config/pa/pa.md (scc): Use ordered_comparison_operator instead of
162         comparison_operator in B and S integer comparisons.  Likewise, use
163         ordered_comparison_operator instead of cmpib_comparison_operator in
164         cmpib patterns.
165         * config/pa/predicates.md (cmpib_comparison_operator): Remove.
167 2020-01-01  Jakub Jelinek  <jakub@redhat.com>
169         Update copyright years.
171         * gcc.c (process_command): Update copyright notice dates.
172         * gcov-dump.c (print_version): Ditto.
173         * gcov.c (print_version): Ditto.
174         * gcov-tool.c (print_version): Ditto.
175         * gengtype.c (create_file): Ditto.
176         * doc/cpp.texi: Bump @copying's copyright year.
177         * doc/cppinternals.texi: Ditto.
178         * doc/gcc.texi: Ditto.
179         * doc/gccint.texi: Ditto.
180         * doc/gcov.texi: Ditto.
181         * doc/install.texi: Ditto.
182         * doc/invoke.texi: Ditto.
184 2020-01-01  Jan Hubicka  <hubicka@ucw.cz>
186         * ipa.c (walk_polymorphic_call_targets): Fix updating of overall
187         summary.
189 2020-01-01  Jakub Jelinek  <jakub@redhat.com>
191         PR tree-optimization/93098
192         * match.pd (popcount): For shift amounts, use integer_onep
193         or wi::to_widest () == cst instead of tree_to_uhwi () == cst
194         tests.  Make sure that precision is power of two larger than or equal
195         to 16.  Ensure shift is never negative.  Use HOST_WIDE_INT_UC macro
196         instead of ULL suffixed constants.  Formatting fixes.
198 Copyright (C) 2020 Free Software Foundation, Inc.
200 Copying and distribution of this file, with or without modification,
201 are permitted in any medium without royalty provided the copyright
202 notice and this notice are preserved.