1 ------------------------------------------------------------------------------
3 -- GNAT RUN-TIME COMPONENTS --
5 -- A D A . E X C E P T I O N S --
9 -- Copyright (C) 1992-2013, Free Software Foundation, Inc. --
11 -- This specification is derived from the Ada Reference Manual for use with --
12 -- GNAT. The copyright notice above, and the license provisions that follow --
13 -- apply solely to the contents of the part following the private keyword. --
15 -- GNAT is free software; you can redistribute it and/or modify it under --
16 -- terms of the GNU General Public License as published by the Free Soft- --
17 -- ware Foundation; either version 3, or (at your option) any later ver- --
18 -- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
19 -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
20 -- or FITNESS FOR A PARTICULAR PURPOSE. --
22 -- As a special exception under Section 7 of GPL version 3, you are granted --
23 -- additional permissions described in the GCC Runtime Library Exception, --
24 -- version 3.1, as published by the Free Software Foundation. --
26 -- You should have received a copy of the GNU General Public License and --
27 -- a copy of the GCC Runtime Library Exception along with this program; --
28 -- see the files COPYING3 and COPYING.RUNTIME respectively. If not, see --
29 -- <http://www.gnu.org/licenses/>. --
31 -- GNAT was originally developed by the GNAT team at New York University. --
32 -- Extensive contributions were provided by Ada Core Technologies Inc. --
34 ------------------------------------------------------------------------------
36 -- This version of Ada.Exceptions is a full Ada 95 version. It omits Ada 2005
37 -- features such as the additional definitions of Exception_Name returning
38 -- Wide_[Wide_]String. It differs from the Ada 95 version only in that it is
39 -- declared Preelaborate (see declaration below for why this is done).
41 -- It is used for building the compiler and the basic tools, since these
42 -- builds may be done with bootstrap compilers that cannot handle these
43 -- additions. The full version of Ada.Exceptions can be found in the files
44 -- a-except-2005.ads/adb, and is used for all other builds where full Ada
45 -- 2005 functionality is required. In particular, it is used for building
46 -- run times on all targets.
48 pragma Compiler_Unit_Warning
;
51 -- We must turn polling off for this unit, because otherwise we get
52 -- elaboration circularities with ourself.
55 with System
.Parameters
;
56 with System
.Standard_Library
;
57 with System
.Traceback_Entries
;
59 package Ada
.Exceptions
is
61 -- We make this preelaborable. If we did not do this, then run time units
62 -- used by the compiler (e.g. s-soflin.ads) would run into trouble.
63 -- Conformance with Ada 95 is not an issue, since this version is used
64 -- only by the compiler.
66 type Exception_Id
is private;
68 Null_Id
: constant Exception_Id
;
70 type Exception_Occurrence
is limited private;
72 type Exception_Occurrence_Access
is access all Exception_Occurrence
;
74 Null_Occurrence
: constant Exception_Occurrence
;
76 function Exception_Name
(X
: Exception_Occurrence
) return String;
77 -- Same as Exception_Name (Exception_Identity (X))
79 function Exception_Name
(Id
: Exception_Id
) return String;
81 procedure Raise_Exception
(E
: Exception_Id
; Message
: String := "");
82 pragma No_Return
(Raise_Exception
);
83 -- Note: In accordance with AI-466, CE is raised if E = Null_Id
85 function Exception_Message
(X
: Exception_Occurrence
) return String;
87 procedure Reraise_Occurrence
(X
: Exception_Occurrence
);
88 -- Note: it would be really nice to give a pragma No_Return for this
89 -- procedure, but it would be wrong, since Reraise_Occurrence does return
90 -- if the argument is the null exception occurrence. See also procedure
91 -- Reraise_Occurrence_Always in the private part of this package.
93 function Exception_Identity
(X
: Exception_Occurrence
) return Exception_Id
;
95 function Exception_Information
(X
: Exception_Occurrence
) return String;
96 -- The format of the exception information is as follows:
98 -- exception name (as in Exception_Name)
99 -- message (or a null line if no message)
101 -- 0xyyyyyyyy 0xyyyyyyyy ...
103 -- The lines are separated by a ASCII.LF character
104 -- The nnnn is the partition Id given as decimal digits.
105 -- The 0x... line represents traceback program counter locations,
106 -- in order with the first one being the exception location.
108 -- Note on ordering: the compiler uses the Save_Occurrence procedure, but
109 -- not the function from Rtsfind, so it is important that the procedure
110 -- come first, since Rtsfind finds the first matching entity.
112 procedure Save_Occurrence
113 (Target
: out Exception_Occurrence
;
114 Source
: Exception_Occurrence
);
116 function Save_Occurrence
117 (Source
: Exception_Occurrence
)
118 return Exception_Occurrence_Access
;
121 package SSL
renames System
.Standard_Library
;
122 package SP
renames System
.Parameters
;
124 subtype EOA
is Exception_Occurrence_Access
;
126 Exception_Msg_Max_Length
: constant := SP
.Default_Exception_Msg_Max_Length
;
132 subtype Code_Loc
is System
.Address
;
133 -- Code location used in building exception tables and for call addresses
134 -- when propagating an exception. Values of this type are created by using
135 -- Label'Address or extracted from machine states using Get_Code_Loc.
137 Null_Loc
: constant Code_Loc
:= System
.Null_Address
;
138 -- Null code location, used to flag outer level frame
140 type Exception_Id
is new SSL
.Exception_Data_Ptr
;
142 function EId_To_String
(X
: Exception_Id
) return String;
143 function String_To_EId
(S
: String) return Exception_Id
;
144 pragma Stream_Convert
(Exception_Id
, String_To_EId
, EId_To_String
);
145 -- Functions for implementing Exception_Id stream attributes
147 Null_Id
: constant Exception_Id
:= null;
149 -------------------------
150 -- Private Subprograms --
151 -------------------------
153 function Current_Target_Exception
return Exception_Occurrence
;
155 (Ada
, Current_Target_Exception
,
156 "__gnat_current_target_exception");
157 -- This routine should return the current raised exception on targets
158 -- which have built-in exception handling such as the Java Virtual
159 -- Machine. For other targets this routine is simply ignored. Currently,
160 -- only JGNAT uses this. See 4jexcept.ads for details. The pragma Export
161 -- allows this routine to be accessed elsewhere in the run-time, even
162 -- though it is in the private part of this package (it is not allowed
163 -- to be in the visible part, since this is set by the reference manual).
165 function Exception_Name_Simple
(X
: Exception_Occurrence
) return String;
166 -- Like Exception_Name, but returns the simple non-qualified name of the
167 -- exception. This is used to implement the Exception_Name function in
168 -- Current_Exceptions (the DEC compatible unit). It is called from the
169 -- compiler generated code (using Rtsfind, which does not respect the
170 -- private barrier, so we can place this function in the private part
171 -- where the compiler can find it, but the spec is unchanged.)
173 procedure Raise_Exception_Always
(E
: Exception_Id
; Message
: String := "");
174 pragma No_Return
(Raise_Exception_Always
);
175 pragma Export
(Ada
, Raise_Exception_Always
, "__gnat_raise_exception");
176 -- This differs from Raise_Exception only in that the caller has determined
177 -- that for sure the parameter E is not null, and that therefore no check
178 -- for Null_Id is required. The expander converts Raise_Exception calls to
179 -- Raise_Exception_Always if it can determine this is the case. The Export
180 -- allows this routine to be accessed from Pure units.
182 procedure Raise_From_Signal_Handler
186 (Ada
, Raise_From_Signal_Handler
,
187 "ada__exceptions__raise_from_signal_handler");
188 pragma No_Return
(Raise_From_Signal_Handler
);
189 -- This routine is used to raise an exception from a signal handler. The
190 -- signal handler has already stored the machine state (i.e. the state that
191 -- corresponds to the location at which the signal was raised). E is the
192 -- Exception_Id specifying what exception is being raised, and M is a
193 -- pointer to a null-terminated string which is the message to be raised.
194 -- Note that this routine never returns, so it is permissible to simply
195 -- jump to this routine, rather than call it. This may be appropriate for
196 -- systems where the right way to get out of signal handler is to alter the
197 -- PC value in the machine state or in some other way ask the operating
198 -- system to return here rather than to the original location.
200 procedure Raise_From_Controlled_Operation
201 (X
: Ada
.Exceptions
.Exception_Occurrence
);
202 pragma No_Return
(Raise_From_Controlled_Operation
);
204 (Ada
, Raise_From_Controlled_Operation
,
205 "__gnat_raise_from_controlled_operation");
206 -- Raise Program_Error, providing information about X (an exception raised
207 -- during a controlled operation) in the exception message.
209 procedure Reraise_Library_Exception_If_Any
;
211 (Ada
, Reraise_Library_Exception_If_Any
,
212 "__gnat_reraise_library_exception_if_any");
213 -- If there was an exception raised during library-level finalization,
214 -- reraise the exception.
216 procedure Reraise_Occurrence_Always
(X
: Exception_Occurrence
);
217 pragma No_Return
(Reraise_Occurrence_Always
);
218 -- This differs from Raise_Occurrence only in that the caller guarantees
219 -- that for sure the parameter X is not the null occurrence, and that
220 -- therefore this procedure cannot return. The expander uses this routine
221 -- in the translation of a raise statement with no parameter (reraise).
223 procedure Reraise_Occurrence_No_Defer
(X
: Exception_Occurrence
);
224 pragma No_Return
(Reraise_Occurrence_No_Defer
);
225 -- Exactly like Reraise_Occurrence, except that abort is not deferred
226 -- before the call and the parameter X is known not to be the null
227 -- occurrence. This is used in generated code when it is known that
228 -- abort is already deferred.
230 function Triggered_By_Abort
return Boolean;
231 -- Determine whether the current exception (if it exists) is an instance of
232 -- Standard'Abort_Signal.
234 -----------------------
235 -- Polling Interface --
236 -----------------------
238 -- The GNAT compiler has an option to generate polling calls to the Poll
239 -- routine in this package. Specifying the -gnatP option for a compilation
240 -- causes a call to Ada.Exceptions.Poll to be generated on every subprogram
241 -- entry and on every iteration of a loop, thus avoiding the possibility of
242 -- a case of unbounded time between calls.
244 -- This polling interface may be used for instrumentation or debugging
245 -- purposes (e.g. implementing watchpoints in software or in the debugger).
247 -- In the GNAT technology itself, this interface is used to implement
248 -- immediate asynchronous transfer of control and immediate abort on
249 -- targets which do not provide for one thread interrupting another.
251 -- Note: this used to be in a separate unit called System.Poll, but that
252 -- caused horrible circular elaboration problems between System.Poll and
256 -- Check for asynchronous abort. Note that we do not inline the body.
257 -- This makes the interface more useful for debugging purposes.
259 --------------------------
260 -- Exception_Occurrence --
261 --------------------------
263 package TBE
renames System
.Traceback_Entries
;
265 Max_Tracebacks
: constant := 50;
266 -- Maximum number of trace backs stored in exception occurrence
268 type Tracebacks_Array
is array (1 .. Max_Tracebacks
) of TBE
.Traceback_Entry
;
269 -- Traceback array stored in exception occurrence
271 type Exception_Occurrence
is record
273 -- Exception_Identity for this exception occurrence
275 Msg_Length
: Natural := 0;
276 -- Length of message (zero = no message)
278 Msg
: String (1 .. Exception_Msg_Max_Length
);
279 -- Characters of message
281 Exception_Raised
: Boolean := False;
282 -- Set to true to indicate that this exception occurrence has actually
283 -- been raised. When an exception occurrence is first created, this is
284 -- set to False, then when it is processed by Raise_Current_Exception,
285 -- it is set to True. If Raise_Current_Exception is used to raise an
286 -- exception for which this flag is already True, then it knows that
287 -- it is dealing with the reraise case (which is useful to distinguish
288 -- for exception tracing purposes).
291 -- Partition_Id for partition raising exception
293 Num_Tracebacks
: Natural range 0 .. Max_Tracebacks
:= 0;
294 -- Number of traceback entries stored
296 Tracebacks
: Tracebacks_Array
;
297 -- Stored tracebacks (in Tracebacks (1 .. Num_Tracebacks))
300 function "=" (Left
, Right
: Exception_Occurrence
) return Boolean
302 -- Don't allow comparison on exception occurrences, we should not need
303 -- this, and it would not work right, because of the Msg and Tracebacks
304 -- fields which have unused entries not copied by Save_Occurrence.
306 function EO_To_String
(X
: Exception_Occurrence
) return String;
307 function String_To_EO
(S
: String) return Exception_Occurrence
;
308 pragma Stream_Convert
(Exception_Occurrence
, String_To_EO
, EO_To_String
);
309 -- Functions for implementing Exception_Occurrence stream attributes
311 Null_Occurrence
: constant Exception_Occurrence
:= (
314 Msg
=> (others => ' '),
315 Exception_Raised
=> False,
318 Tracebacks
=> (others => TBE
.Null_TB_Entry
));