1 /* Compute register class preferences for pseudo-registers.
2 Copyright (C) 1987, 1988, 1991, 1992, 1993, 1994, 1995, 1996
3 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
4 Free Software Foundation, Inc.
6 This file is part of GCC.
8 GCC is free software; you can redistribute it and/or modify it under
9 the terms of the GNU General Public License as published by the Free
10 Software Foundation; either version 2, or (at your option) any later
13 GCC is distributed in the hope that it will be useful, but WITHOUT ANY
14 WARRANTY; without even the implied warranty of MERCHANTABILITY or
15 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
18 You should have received a copy of the GNU General Public License
19 along with GCC; see the file COPYING. If not, write to the Free
20 Software Foundation, 59 Temple Place - Suite 330, Boston, MA
24 /* This file contains two passes of the compiler: reg_scan and reg_class.
25 It also defines some tables of information about the hardware registers
26 and a function init_reg_sets to initialize the tables. */
30 #include "coretypes.h"
32 #include "hard-reg-set.h"
37 #include "basic-block.h"
40 #include "insn-config.h"
50 static void init_reg_sets_1 (void);
51 static void init_reg_autoinc (void);
53 /* If we have auto-increment or auto-decrement and we can have secondary
54 reloads, we are not allowed to use classes requiring secondary
55 reloads for pseudos auto-incremented since reload can't handle it. */
58 #if defined(SECONDARY_INPUT_RELOAD_CLASS) || defined(SECONDARY_OUTPUT_RELOAD_CLASS)
59 #define FORBIDDEN_INC_DEC_CLASSES
63 /* Register tables used by many passes. */
65 /* Indexed by hard register number, contains 1 for registers
66 that are fixed use (stack pointer, pc, frame pointer, etc.).
67 These are the registers that cannot be used to allocate
68 a pseudo reg for general use. */
70 char fixed_regs
[FIRST_PSEUDO_REGISTER
];
72 /* Same info as a HARD_REG_SET. */
74 HARD_REG_SET fixed_reg_set
;
76 /* Data for initializing the above. */
78 static const char initial_fixed_regs
[] = FIXED_REGISTERS
;
80 /* Indexed by hard register number, contains 1 for registers
81 that are fixed use or are clobbered by function calls.
82 These are the registers that cannot be used to allocate
83 a pseudo reg whose life crosses calls unless we are able
84 to save/restore them across the calls. */
86 char call_used_regs
[FIRST_PSEUDO_REGISTER
];
88 /* Same info as a HARD_REG_SET. */
90 HARD_REG_SET call_used_reg_set
;
92 /* HARD_REG_SET of registers we want to avoid caller saving. */
93 HARD_REG_SET losing_caller_save_reg_set
;
95 /* Data for initializing the above. */
97 static const char initial_call_used_regs
[] = CALL_USED_REGISTERS
;
99 /* This is much like call_used_regs, except it doesn't have to
100 be a superset of FIXED_REGISTERS. This vector indicates
101 what is really call clobbered, and is used when defining
102 regs_invalidated_by_call. */
104 #ifdef CALL_REALLY_USED_REGISTERS
105 char call_really_used_regs
[] = CALL_REALLY_USED_REGISTERS
;
108 #ifdef CALL_REALLY_USED_REGISTERS
109 #define CALL_REALLY_USED_REGNO_P(X) call_really_used_regs[X]
111 #define CALL_REALLY_USED_REGNO_P(X) call_used_regs[X]
115 /* Indexed by hard register number, contains 1 for registers that are
116 fixed use or call used registers that cannot hold quantities across
117 calls even if we are willing to save and restore them. call fixed
118 registers are a subset of call used registers. */
120 char call_fixed_regs
[FIRST_PSEUDO_REGISTER
];
122 /* The same info as a HARD_REG_SET. */
124 HARD_REG_SET call_fixed_reg_set
;
126 /* Number of non-fixed registers. */
128 int n_non_fixed_regs
;
130 /* Indexed by hard register number, contains 1 for registers
131 that are being used for global register decls.
132 These must be exempt from ordinary flow analysis
133 and are also considered fixed. */
135 char global_regs
[FIRST_PSEUDO_REGISTER
];
137 /* Contains 1 for registers that are set or clobbered by calls. */
138 /* ??? Ideally, this would be just call_used_regs plus global_regs, but
139 for someone's bright idea to have call_used_regs strictly include
140 fixed_regs. Which leaves us guessing as to the set of fixed_regs
141 that are actually preserved. We know for sure that those associated
142 with the local stack frame are safe, but scant others. */
144 HARD_REG_SET regs_invalidated_by_call
;
146 /* Table of register numbers in the order in which to try to use them. */
147 #ifdef REG_ALLOC_ORDER
148 int reg_alloc_order
[FIRST_PSEUDO_REGISTER
] = REG_ALLOC_ORDER
;
150 /* The inverse of reg_alloc_order. */
151 int inv_reg_alloc_order
[FIRST_PSEUDO_REGISTER
];
154 /* For each reg class, a HARD_REG_SET saying which registers are in it. */
156 HARD_REG_SET reg_class_contents
[N_REG_CLASSES
];
158 /* The same information, but as an array of unsigned ints. We copy from
159 these unsigned ints to the table above. We do this so the tm.h files
160 do not have to be aware of the wordsize for machines with <= 64 regs.
161 Note that we hard-code 32 here, not HOST_BITS_PER_INT. */
164 ((FIRST_PSEUDO_REGISTER + (32 - 1)) / 32)
166 static const unsigned int_reg_class_contents
[N_REG_CLASSES
][N_REG_INTS
]
167 = REG_CLASS_CONTENTS
;
169 /* For each reg class, number of regs it contains. */
171 unsigned int reg_class_size
[N_REG_CLASSES
];
173 /* For each reg class, table listing all the containing classes. */
175 enum reg_class reg_class_superclasses
[N_REG_CLASSES
][N_REG_CLASSES
];
177 /* For each reg class, table listing all the classes contained in it. */
179 enum reg_class reg_class_subclasses
[N_REG_CLASSES
][N_REG_CLASSES
];
181 /* For each pair of reg classes,
182 a largest reg class contained in their union. */
184 enum reg_class reg_class_subunion
[N_REG_CLASSES
][N_REG_CLASSES
];
186 /* For each pair of reg classes,
187 the smallest reg class containing their union. */
189 enum reg_class reg_class_superunion
[N_REG_CLASSES
][N_REG_CLASSES
];
191 /* Array containing all of the register names. */
193 const char * reg_names
[] = REGISTER_NAMES
;
195 /* For each hard register, the widest mode object that it can contain.
196 This will be a MODE_INT mode if the register can hold integers. Otherwise
197 it will be a MODE_FLOAT or a MODE_CC mode, whichever is valid for the
200 enum machine_mode reg_raw_mode
[FIRST_PSEUDO_REGISTER
];
202 /* 1 if there is a register of given mode. */
204 bool have_regs_of_mode
[MAX_MACHINE_MODE
];
206 /* 1 if class does contain register of given mode. */
208 static char contains_reg_of_mode
[N_REG_CLASSES
] [MAX_MACHINE_MODE
];
210 /* Maximum cost of moving from a register in one class to a register in
211 another class. Based on REGISTER_MOVE_COST. */
213 static int move_cost
[MAX_MACHINE_MODE
][N_REG_CLASSES
][N_REG_CLASSES
];
215 /* Similar, but here we don't have to move if the first index is a subset
216 of the second so in that case the cost is zero. */
218 static int may_move_in_cost
[MAX_MACHINE_MODE
][N_REG_CLASSES
][N_REG_CLASSES
];
220 /* Similar, but here we don't have to move if the first index is a superset
221 of the second so in that case the cost is zero. */
223 static int may_move_out_cost
[MAX_MACHINE_MODE
][N_REG_CLASSES
][N_REG_CLASSES
];
225 #ifdef FORBIDDEN_INC_DEC_CLASSES
227 /* These are the classes that regs which are auto-incremented or decremented
230 static int forbidden_inc_dec_class
[N_REG_CLASSES
];
232 /* Indexed by n, is nonzero if (REG n) is used in an auto-inc or auto-dec
235 static char *in_inc_dec
;
237 #endif /* FORBIDDEN_INC_DEC_CLASSES */
239 /* Sample MEM values for use by memory_move_secondary_cost. */
241 static GTY(()) rtx top_of_stack
[MAX_MACHINE_MODE
];
243 /* Linked list of reg_info structures allocated for reg_n_info array.
244 Grouping all of the allocated structures together in one lump
245 means only one call to bzero to clear them, rather than n smaller
247 struct reg_info_data
{
248 struct reg_info_data
*next
; /* next set of reg_info structures */
249 size_t min_index
; /* minimum index # */
250 size_t max_index
; /* maximum index # */
251 char used_p
; /* nonzero if this has been used previously */
252 reg_info data
[1]; /* beginning of the reg_info data */
255 static struct reg_info_data
*reg_info_head
;
257 /* No more global register variables may be declared; true once
258 regclass has been initialized. */
260 static int no_global_reg_vars
= 0;
262 /* Specify number of hard registers given machine mode occupy. */
263 unsigned char hard_regno_nregs
[FIRST_PSEUDO_REGISTER
][MAX_MACHINE_MODE
];
265 /* Function called only once to initialize the above data on reg usage.
266 Once this is done, various switches may override. */
273 /* First copy the register information from the initial int form into
276 for (i
= 0; i
< N_REG_CLASSES
; i
++)
278 CLEAR_HARD_REG_SET (reg_class_contents
[i
]);
280 /* Note that we hard-code 32 here, not HOST_BITS_PER_INT. */
281 for (j
= 0; j
< FIRST_PSEUDO_REGISTER
; j
++)
282 if (int_reg_class_contents
[i
][j
/ 32]
283 & ((unsigned) 1 << (j
% 32)))
284 SET_HARD_REG_BIT (reg_class_contents
[i
], j
);
287 /* Sanity check: make sure the target macros FIXED_REGISTERS and
288 CALL_USED_REGISTERS had the right number of initializers. */
289 gcc_assert (sizeof fixed_regs
== sizeof initial_fixed_regs
);
290 gcc_assert (sizeof call_used_regs
== sizeof initial_call_used_regs
);
292 memcpy (fixed_regs
, initial_fixed_regs
, sizeof fixed_regs
);
293 memcpy (call_used_regs
, initial_call_used_regs
, sizeof call_used_regs
);
294 memset (global_regs
, 0, sizeof global_regs
);
296 /* Do any additional initialization regsets may need. */
297 INIT_ONCE_REG_SET ();
299 #ifdef REG_ALLOC_ORDER
300 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
301 inv_reg_alloc_order
[reg_alloc_order
[i
]] = i
;
305 /* After switches have been processed, which perhaps alter
306 `fixed_regs' and `call_used_regs', convert them to HARD_REG_SETs. */
309 init_reg_sets_1 (void)
312 unsigned int /* enum machine_mode */ m
;
314 /* This macro allows the fixed or call-used registers
315 and the register classes to depend on target flags. */
317 #ifdef CONDITIONAL_REGISTER_USAGE
318 CONDITIONAL_REGISTER_USAGE
;
321 /* Compute number of hard regs in each class. */
323 memset (reg_class_size
, 0, sizeof reg_class_size
);
324 for (i
= 0; i
< N_REG_CLASSES
; i
++)
325 for (j
= 0; j
< FIRST_PSEUDO_REGISTER
; j
++)
326 if (TEST_HARD_REG_BIT (reg_class_contents
[i
], j
))
329 /* Initialize the table of subunions.
330 reg_class_subunion[I][J] gets the largest-numbered reg-class
331 that is contained in the union of classes I and J. */
333 for (i
= 0; i
< N_REG_CLASSES
; i
++)
335 for (j
= 0; j
< N_REG_CLASSES
; j
++)
340 COPY_HARD_REG_SET (c
, reg_class_contents
[i
]);
341 IOR_HARD_REG_SET (c
, reg_class_contents
[j
]);
342 for (k
= 0; k
< N_REG_CLASSES
; k
++)
344 GO_IF_HARD_REG_SUBSET (reg_class_contents
[k
], c
,
349 /* Keep the largest subclass. */ /* SPEE 900308 */
350 GO_IF_HARD_REG_SUBSET (reg_class_contents
[k
],
351 reg_class_contents
[(int) reg_class_subunion
[i
][j
]],
353 reg_class_subunion
[i
][j
] = (enum reg_class
) k
;
360 /* Initialize the table of superunions.
361 reg_class_superunion[I][J] gets the smallest-numbered reg-class
362 containing the union of classes I and J. */
364 for (i
= 0; i
< N_REG_CLASSES
; i
++)
366 for (j
= 0; j
< N_REG_CLASSES
; j
++)
371 COPY_HARD_REG_SET (c
, reg_class_contents
[i
]);
372 IOR_HARD_REG_SET (c
, reg_class_contents
[j
]);
373 for (k
= 0; k
< N_REG_CLASSES
; k
++)
374 GO_IF_HARD_REG_SUBSET (c
, reg_class_contents
[k
], superclass
);
377 reg_class_superunion
[i
][j
] = (enum reg_class
) k
;
381 /* Initialize the tables of subclasses and superclasses of each reg class.
382 First clear the whole table, then add the elements as they are found. */
384 for (i
= 0; i
< N_REG_CLASSES
; i
++)
386 for (j
= 0; j
< N_REG_CLASSES
; j
++)
388 reg_class_superclasses
[i
][j
] = LIM_REG_CLASSES
;
389 reg_class_subclasses
[i
][j
] = LIM_REG_CLASSES
;
393 for (i
= 0; i
< N_REG_CLASSES
; i
++)
395 if (i
== (int) NO_REGS
)
398 for (j
= i
+ 1; j
< N_REG_CLASSES
; j
++)
402 GO_IF_HARD_REG_SUBSET (reg_class_contents
[i
], reg_class_contents
[j
],
406 /* Reg class I is a subclass of J.
407 Add J to the table of superclasses of I. */
408 p
= ®_class_superclasses
[i
][0];
409 while (*p
!= LIM_REG_CLASSES
) p
++;
410 *p
= (enum reg_class
) j
;
411 /* Add I to the table of superclasses of J. */
412 p
= ®_class_subclasses
[j
][0];
413 while (*p
!= LIM_REG_CLASSES
) p
++;
414 *p
= (enum reg_class
) i
;
418 /* Initialize "constant" tables. */
420 CLEAR_HARD_REG_SET (fixed_reg_set
);
421 CLEAR_HARD_REG_SET (call_used_reg_set
);
422 CLEAR_HARD_REG_SET (call_fixed_reg_set
);
423 CLEAR_HARD_REG_SET (regs_invalidated_by_call
);
425 memcpy (call_fixed_regs
, fixed_regs
, sizeof call_fixed_regs
);
427 n_non_fixed_regs
= 0;
429 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
431 /* call_used_regs must include fixed_regs. */
432 gcc_assert (!fixed_regs
[i
] || call_used_regs
[i
]);
433 #ifdef CALL_REALLY_USED_REGISTERS
434 /* call_used_regs must include call_really_used_regs. */
435 gcc_assert (!call_really_used_regs
[i
] || call_used_regs
[i
]);
439 SET_HARD_REG_BIT (fixed_reg_set
, i
);
443 if (call_used_regs
[i
])
444 SET_HARD_REG_BIT (call_used_reg_set
, i
);
445 if (call_fixed_regs
[i
])
446 SET_HARD_REG_BIT (call_fixed_reg_set
, i
);
447 if (CLASS_LIKELY_SPILLED_P (REGNO_REG_CLASS (i
)))
448 SET_HARD_REG_BIT (losing_caller_save_reg_set
, i
);
450 /* There are a couple of fixed registers that we know are safe to
451 exclude from being clobbered by calls:
453 The frame pointer is always preserved across calls. The arg pointer
454 is if it is fixed. The stack pointer usually is, unless
455 RETURN_POPS_ARGS, in which case an explicit CLOBBER will be present.
456 If we are generating PIC code, the PIC offset table register is
457 preserved across calls, though the target can override that. */
459 if (i
== STACK_POINTER_REGNUM
)
461 else if (global_regs
[i
])
462 SET_HARD_REG_BIT (regs_invalidated_by_call
, i
);
463 else if (i
== FRAME_POINTER_REGNUM
)
465 #if HARD_FRAME_POINTER_REGNUM != FRAME_POINTER_REGNUM
466 else if (i
== HARD_FRAME_POINTER_REGNUM
)
469 #if ARG_POINTER_REGNUM != FRAME_POINTER_REGNUM
470 else if (i
== ARG_POINTER_REGNUM
&& fixed_regs
[i
])
473 #ifndef PIC_OFFSET_TABLE_REG_CALL_CLOBBERED
474 else if (i
== (unsigned) PIC_OFFSET_TABLE_REGNUM
&& fixed_regs
[i
])
477 else if (CALL_REALLY_USED_REGNO_P (i
))
478 SET_HARD_REG_BIT (regs_invalidated_by_call
, i
);
481 memset (have_regs_of_mode
, 0, sizeof (have_regs_of_mode
));
482 memset (contains_reg_of_mode
, 0, sizeof (contains_reg_of_mode
));
483 for (m
= 0; m
< (unsigned int) MAX_MACHINE_MODE
; m
++)
484 for (i
= 0; i
< N_REG_CLASSES
; i
++)
485 if ((unsigned) CLASS_MAX_NREGS (i
, m
) <= reg_class_size
[i
])
486 for (j
= 0; j
< FIRST_PSEUDO_REGISTER
; j
++)
487 if (!fixed_regs
[j
] && TEST_HARD_REG_BIT (reg_class_contents
[i
], j
)
488 && HARD_REGNO_MODE_OK (j
, m
))
490 contains_reg_of_mode
[i
][m
] = 1;
491 have_regs_of_mode
[m
] = 1;
495 /* Initialize the move cost table. Find every subset of each class
496 and take the maximum cost of moving any subset to any other. */
498 for (m
= 0; m
< (unsigned int) MAX_MACHINE_MODE
; m
++)
499 if (have_regs_of_mode
[m
])
501 for (i
= 0; i
< N_REG_CLASSES
; i
++)
502 if (contains_reg_of_mode
[i
][m
])
503 for (j
= 0; j
< N_REG_CLASSES
; j
++)
506 enum reg_class
*p1
, *p2
;
508 if (!contains_reg_of_mode
[j
][m
])
510 move_cost
[m
][i
][j
] = 65536;
511 may_move_in_cost
[m
][i
][j
] = 65536;
512 may_move_out_cost
[m
][i
][j
] = 65536;
516 cost
= REGISTER_MOVE_COST (m
, i
, j
);
518 for (p2
= ®_class_subclasses
[j
][0];
519 *p2
!= LIM_REG_CLASSES
;
521 if (*p2
!= i
&& contains_reg_of_mode
[*p2
][m
])
522 cost
= MAX (cost
, move_cost
[m
][i
][*p2
]);
524 for (p1
= ®_class_subclasses
[i
][0];
525 *p1
!= LIM_REG_CLASSES
;
527 if (*p1
!= j
&& contains_reg_of_mode
[*p1
][m
])
528 cost
= MAX (cost
, move_cost
[m
][*p1
][j
]);
530 move_cost
[m
][i
][j
] = cost
;
532 if (reg_class_subset_p (i
, j
))
533 may_move_in_cost
[m
][i
][j
] = 0;
535 may_move_in_cost
[m
][i
][j
] = cost
;
537 if (reg_class_subset_p (j
, i
))
538 may_move_out_cost
[m
][i
][j
] = 0;
540 may_move_out_cost
[m
][i
][j
] = cost
;
544 for (j
= 0; j
< N_REG_CLASSES
; j
++)
546 move_cost
[m
][i
][j
] = 65536;
547 may_move_in_cost
[m
][i
][j
] = 65536;
548 may_move_out_cost
[m
][i
][j
] = 65536;
553 /* Compute the table of register modes.
554 These values are used to record death information for individual registers
555 (as opposed to a multi-register mode). */
558 init_reg_modes_once (void)
562 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
563 for (j
= 0; j
< MAX_MACHINE_MODE
; j
++)
564 hard_regno_nregs
[i
][j
] = HARD_REGNO_NREGS(i
, (enum machine_mode
)j
);
566 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
568 reg_raw_mode
[i
] = choose_hard_reg_mode (i
, 1, false);
570 /* If we couldn't find a valid mode, just use the previous mode.
571 ??? One situation in which we need to do this is on the mips where
572 HARD_REGNO_NREGS (fpreg, [SD]Fmode) returns 2. Ideally we'd like
573 to use DF mode for the even registers and VOIDmode for the odd
574 (for the cpu models where the odd ones are inaccessible). */
575 if (reg_raw_mode
[i
] == VOIDmode
)
576 reg_raw_mode
[i
] = i
== 0 ? word_mode
: reg_raw_mode
[i
-1];
580 /* Finish initializing the register sets and
581 initialize the register modes. */
586 /* This finishes what was started by init_reg_sets, but couldn't be done
587 until after register usage was specified. */
593 /* Initialize some fake stack-frame MEM references for use in
594 memory_move_secondary_cost. */
597 init_fake_stack_mems (void)
599 #ifdef HAVE_SECONDARY_RELOADS
603 for (i
= 0; i
< MAX_MACHINE_MODE
; i
++)
604 top_of_stack
[i
] = gen_rtx_MEM (i
, stack_pointer_rtx
);
609 #ifdef HAVE_SECONDARY_RELOADS
611 /* Compute extra cost of moving registers to/from memory due to reloads.
612 Only needed if secondary reloads are required for memory moves. */
615 memory_move_secondary_cost (enum machine_mode mode
, enum reg_class
class, int in
)
617 enum reg_class altclass
;
618 int partial_cost
= 0;
619 /* We need a memory reference to feed to SECONDARY... macros. */
620 /* mem may be unused even if the SECONDARY_ macros are defined. */
621 rtx mem ATTRIBUTE_UNUSED
= top_of_stack
[(int) mode
];
626 #ifdef SECONDARY_INPUT_RELOAD_CLASS
627 altclass
= SECONDARY_INPUT_RELOAD_CLASS (class, mode
, mem
);
634 #ifdef SECONDARY_OUTPUT_RELOAD_CLASS
635 altclass
= SECONDARY_OUTPUT_RELOAD_CLASS (class, mode
, mem
);
641 if (altclass
== NO_REGS
)
645 partial_cost
= REGISTER_MOVE_COST (mode
, altclass
, class);
647 partial_cost
= REGISTER_MOVE_COST (mode
, class, altclass
);
649 if (class == altclass
)
650 /* This isn't simply a copy-to-temporary situation. Can't guess
651 what it is, so MEMORY_MOVE_COST really ought not to be calling
654 I'm tempted to put in an assert here, but returning this will
655 probably only give poor estimates, which is what we would've
656 had before this code anyways. */
659 /* Check if the secondary reload register will also need a
661 return memory_move_secondary_cost (mode
, altclass
, in
) + partial_cost
;
665 /* Return a machine mode that is legitimate for hard reg REGNO and large
666 enough to save nregs. If we can't find one, return VOIDmode.
667 If CALL_SAVED is true, only consider modes that are call saved. */
670 choose_hard_reg_mode (unsigned int regno ATTRIBUTE_UNUSED
,
671 unsigned int nregs
, bool call_saved
)
673 unsigned int /* enum machine_mode */ m
;
674 enum machine_mode found_mode
= VOIDmode
, mode
;
676 /* We first look for the largest integer mode that can be validly
677 held in REGNO. If none, we look for the largest floating-point mode.
678 If we still didn't find a valid mode, try CCmode. */
680 for (mode
= GET_CLASS_NARROWEST_MODE (MODE_INT
);
682 mode
= GET_MODE_WIDER_MODE (mode
))
683 if ((unsigned) hard_regno_nregs
[regno
][mode
] == nregs
684 && HARD_REGNO_MODE_OK (regno
, mode
)
685 && (! call_saved
|| ! HARD_REGNO_CALL_PART_CLOBBERED (regno
, mode
)))
688 if (found_mode
!= VOIDmode
)
691 for (mode
= GET_CLASS_NARROWEST_MODE (MODE_FLOAT
);
693 mode
= GET_MODE_WIDER_MODE (mode
))
694 if ((unsigned) hard_regno_nregs
[regno
][mode
] == nregs
695 && HARD_REGNO_MODE_OK (regno
, mode
)
696 && (! call_saved
|| ! HARD_REGNO_CALL_PART_CLOBBERED (regno
, mode
)))
699 if (found_mode
!= VOIDmode
)
702 for (mode
= GET_CLASS_NARROWEST_MODE (MODE_VECTOR_FLOAT
);
704 mode
= GET_MODE_WIDER_MODE (mode
))
705 if ((unsigned) hard_regno_nregs
[regno
][mode
] == nregs
706 && HARD_REGNO_MODE_OK (regno
, mode
)
707 && (! call_saved
|| ! HARD_REGNO_CALL_PART_CLOBBERED (regno
, mode
)))
710 if (found_mode
!= VOIDmode
)
713 for (mode
= GET_CLASS_NARROWEST_MODE (MODE_VECTOR_INT
);
715 mode
= GET_MODE_WIDER_MODE (mode
))
716 if ((unsigned) hard_regno_nregs
[regno
][mode
] == nregs
717 && HARD_REGNO_MODE_OK (regno
, mode
)
718 && (! call_saved
|| ! HARD_REGNO_CALL_PART_CLOBBERED (regno
, mode
)))
721 if (found_mode
!= VOIDmode
)
724 /* Iterate over all of the CCmodes. */
725 for (m
= (unsigned int) CCmode
; m
< (unsigned int) NUM_MACHINE_MODES
; ++m
)
727 mode
= (enum machine_mode
) m
;
728 if ((unsigned) hard_regno_nregs
[regno
][mode
] == nregs
729 && HARD_REGNO_MODE_OK (regno
, mode
)
730 && (! call_saved
|| ! HARD_REGNO_CALL_PART_CLOBBERED (regno
, mode
)))
734 /* We can't find a mode valid for this register. */
738 /* Specify the usage characteristics of the register named NAME.
739 It should be a fixed register if FIXED and a
740 call-used register if CALL_USED. */
743 fix_register (const char *name
, int fixed
, int call_used
)
747 /* Decode the name and update the primary form of
748 the register info. */
750 if ((i
= decode_reg_name (name
)) >= 0)
752 if ((i
== STACK_POINTER_REGNUM
753 #ifdef HARD_FRAME_POINTER_REGNUM
754 || i
== HARD_FRAME_POINTER_REGNUM
756 || i
== FRAME_POINTER_REGNUM
759 && (fixed
== 0 || call_used
== 0))
761 static const char * const what_option
[2][2] = {
762 { "call-saved", "call-used" },
763 { "no-such-option", "fixed" }};
765 error ("can't use '%s' as a %s register", name
,
766 what_option
[fixed
][call_used
]);
770 fixed_regs
[i
] = fixed
;
771 call_used_regs
[i
] = call_used
;
772 #ifdef CALL_REALLY_USED_REGISTERS
774 call_really_used_regs
[i
] = call_used
;
780 warning ("unknown register name: %s", name
);
784 /* Mark register number I as global. */
787 globalize_reg (int i
)
789 if (fixed_regs
[i
] == 0 && no_global_reg_vars
)
790 error ("global register variable follows a function definition");
794 warning ("register used for two global register variables");
798 if (call_used_regs
[i
] && ! fixed_regs
[i
])
799 warning ("call-clobbered register used for global register variable");
803 /* If we're globalizing the frame pointer, we need to set the
804 appropriate regs_invalidated_by_call bit, even if it's already
805 set in fixed_regs. */
806 if (i
!= STACK_POINTER_REGNUM
)
807 SET_HARD_REG_BIT (regs_invalidated_by_call
, i
);
809 /* If already fixed, nothing else to do. */
813 fixed_regs
[i
] = call_used_regs
[i
] = call_fixed_regs
[i
] = 1;
814 #ifdef CALL_REALLY_USED_REGISTERS
815 call_really_used_regs
[i
] = 1;
819 SET_HARD_REG_BIT (fixed_reg_set
, i
);
820 SET_HARD_REG_BIT (call_used_reg_set
, i
);
821 SET_HARD_REG_BIT (call_fixed_reg_set
, i
);
824 /* Now the data and code for the `regclass' pass, which happens
825 just before local-alloc. */
827 /* The `costs' struct records the cost of using a hard register of each class
828 and of using memory for each pseudo. We use this data to set up
829 register class preferences. */
833 int cost
[N_REG_CLASSES
];
837 /* Structure used to record preferences of given pseudo. */
840 /* (enum reg_class) prefclass is the preferred class. */
843 /* altclass is a register class that we should use for allocating
844 pseudo if no register in the preferred class is available.
845 If no register in this class is available, memory is preferred.
847 It might appear to be more general to have a bitmask of classes here,
848 but since it is recommended that there be a class corresponding to the
849 union of most major pair of classes, that generality is not required. */
853 /* Record the cost of each class for each pseudo. */
855 static struct costs
*costs
;
857 /* Initialized once, and used to initialize cost values for each insn. */
859 static struct costs init_cost
;
861 /* Record preferences of each pseudo.
862 This is available after `regclass' is run. */
864 static struct reg_pref
*reg_pref
;
866 /* Allocated buffers for reg_pref. */
868 static struct reg_pref
*reg_pref_buffer
;
870 /* Frequency of executions of current insn. */
872 static int frequency
;
874 static rtx
scan_one_insn (rtx
, int);
875 static void record_operand_costs (rtx
, struct costs
*, struct reg_pref
*);
876 static void dump_regclass (FILE *);
877 static void record_reg_classes (int, int, rtx
*, enum machine_mode
*,
878 const char **, rtx
, struct costs
*,
880 static int copy_cost (rtx
, enum machine_mode
, enum reg_class
, int);
881 static void record_address_regs (rtx
, enum reg_class
, int);
882 #ifdef FORBIDDEN_INC_DEC_CLASSES
883 static int auto_inc_dec_reg_p (rtx
, enum machine_mode
);
885 static void reg_scan_mark_refs (rtx
, rtx
, int, unsigned int);
887 /* Return the reg_class in which pseudo reg number REGNO is best allocated.
888 This function is sometimes called before the info has been computed.
889 When that happens, just return GENERAL_REGS, which is innocuous. */
892 reg_preferred_class (int regno
)
896 return (enum reg_class
) reg_pref
[regno
].prefclass
;
900 reg_alternate_class (int regno
)
905 return (enum reg_class
) reg_pref
[regno
].altclass
;
908 /* Initialize some global data for this pass. */
915 init_cost
.mem_cost
= 10000;
916 for (i
= 0; i
< N_REG_CLASSES
; i
++)
917 init_cost
.cost
[i
] = 10000;
919 /* This prevents dump_flow_info from losing if called
920 before regclass is run. */
923 /* No more global register variables may be declared. */
924 no_global_reg_vars
= 1;
927 /* Dump register costs. */
929 dump_regclass (FILE *dump
)
931 static const char *const reg_class_names
[] = REG_CLASS_NAMES
;
933 for (i
= FIRST_PSEUDO_REGISTER
; i
< max_regno
; i
++)
935 int /* enum reg_class */ class;
938 fprintf (dump
, " Register %i costs:", i
);
939 for (class = 0; class < (int) N_REG_CLASSES
; class++)
940 if (contains_reg_of_mode
[(enum reg_class
) class][PSEUDO_REGNO_MODE (i
)]
941 #ifdef FORBIDDEN_INC_DEC_CLASSES
943 || !forbidden_inc_dec_class
[(enum reg_class
) class])
945 #ifdef CANNOT_CHANGE_MODE_CLASS
946 && ! invalid_mode_change_p (i
, (enum reg_class
) class,
947 PSEUDO_REGNO_MODE (i
))
950 fprintf (dump
, " %s:%i", reg_class_names
[class],
951 costs
[i
].cost
[(enum reg_class
) class]);
952 fprintf (dump
, " MEM:%i\n", costs
[i
].mem_cost
);
958 /* Calculate the costs of insn operands. */
961 record_operand_costs (rtx insn
, struct costs
*op_costs
,
962 struct reg_pref
*reg_pref
)
964 const char *constraints
[MAX_RECOG_OPERANDS
];
965 enum machine_mode modes
[MAX_RECOG_OPERANDS
];
968 for (i
= 0; i
< recog_data
.n_operands
; i
++)
970 constraints
[i
] = recog_data
.constraints
[i
];
971 modes
[i
] = recog_data
.operand_mode
[i
];
974 /* If we get here, we are set up to record the costs of all the
975 operands for this insn. Start by initializing the costs.
976 Then handle any address registers. Finally record the desired
977 classes for any pseudos, doing it twice if some pair of
978 operands are commutative. */
980 for (i
= 0; i
< recog_data
.n_operands
; i
++)
982 op_costs
[i
] = init_cost
;
984 if (GET_CODE (recog_data
.operand
[i
]) == SUBREG
)
985 recog_data
.operand
[i
] = SUBREG_REG (recog_data
.operand
[i
]);
987 if (MEM_P (recog_data
.operand
[i
]))
988 record_address_regs (XEXP (recog_data
.operand
[i
], 0),
989 MODE_BASE_REG_CLASS (modes
[i
]), frequency
* 2);
990 else if (constraints
[i
][0] == 'p'
991 || EXTRA_ADDRESS_CONSTRAINT (constraints
[i
][0], constraints
[i
]))
992 record_address_regs (recog_data
.operand
[i
],
993 MODE_BASE_REG_CLASS (modes
[i
]), frequency
* 2);
996 /* Check for commutative in a separate loop so everything will
997 have been initialized. We must do this even if one operand
998 is a constant--see addsi3 in m68k.md. */
1000 for (i
= 0; i
< (int) recog_data
.n_operands
- 1; i
++)
1001 if (constraints
[i
][0] == '%')
1003 const char *xconstraints
[MAX_RECOG_OPERANDS
];
1006 /* Handle commutative operands by swapping the constraints.
1007 We assume the modes are the same. */
1009 for (j
= 0; j
< recog_data
.n_operands
; j
++)
1010 xconstraints
[j
] = constraints
[j
];
1012 xconstraints
[i
] = constraints
[i
+1];
1013 xconstraints
[i
+1] = constraints
[i
];
1014 record_reg_classes (recog_data
.n_alternatives
, recog_data
.n_operands
,
1015 recog_data
.operand
, modes
,
1016 xconstraints
, insn
, op_costs
, reg_pref
);
1019 record_reg_classes (recog_data
.n_alternatives
, recog_data
.n_operands
,
1020 recog_data
.operand
, modes
,
1021 constraints
, insn
, op_costs
, reg_pref
);
1024 /* Subroutine of regclass, processes one insn INSN. Scan it and record each
1025 time it would save code to put a certain register in a certain class.
1026 PASS, when nonzero, inhibits some optimizations which need only be done
1028 Return the last insn processed, so that the scan can be continued from
1032 scan_one_insn (rtx insn
, int pass
)
1034 enum rtx_code pat_code
;
1037 struct costs op_costs
[MAX_RECOG_OPERANDS
];
1042 pat_code
= GET_CODE (PATTERN (insn
));
1044 || pat_code
== CLOBBER
1045 || pat_code
== ASM_INPUT
1046 || pat_code
== ADDR_VEC
1047 || pat_code
== ADDR_DIFF_VEC
)
1050 set
= single_set (insn
);
1051 extract_insn (insn
);
1053 /* If this insn loads a parameter from its stack slot, then
1054 it represents a savings, rather than a cost, if the
1055 parameter is stored in memory. Record this fact. */
1057 if (set
!= 0 && REG_P (SET_DEST (set
))
1058 && MEM_P (SET_SRC (set
))
1059 && (note
= find_reg_note (insn
, REG_EQUIV
,
1061 && MEM_P (XEXP (note
, 0)))
1063 costs
[REGNO (SET_DEST (set
))].mem_cost
1064 -= (MEMORY_MOVE_COST (GET_MODE (SET_DEST (set
)),
1067 record_address_regs (XEXP (SET_SRC (set
), 0),
1068 MODE_BASE_REG_CLASS (VOIDmode
), frequency
* 2);
1072 /* Improve handling of two-address insns such as
1073 (set X (ashift CONST Y)) where CONST must be made to
1074 match X. Change it into two insns: (set X CONST)
1075 (set X (ashift X Y)). If we left this for reloading, it
1076 would probably get three insns because X and Y might go
1077 in the same place. This prevents X and Y from receiving
1080 We can only do this if the modes of operands 0 and 1
1081 (which might not be the same) are tieable and we only need
1082 do this during our first pass. */
1084 if (pass
== 0 && optimize
1085 && recog_data
.n_operands
>= 3
1086 && recog_data
.constraints
[1][0] == '0'
1087 && recog_data
.constraints
[1][1] == 0
1088 && CONSTANT_P (recog_data
.operand
[1])
1089 && ! rtx_equal_p (recog_data
.operand
[0], recog_data
.operand
[1])
1090 && ! rtx_equal_p (recog_data
.operand
[0], recog_data
.operand
[2])
1091 && REG_P (recog_data
.operand
[0])
1092 && MODES_TIEABLE_P (GET_MODE (recog_data
.operand
[0]),
1093 recog_data
.operand_mode
[1]))
1095 rtx previnsn
= prev_real_insn (insn
);
1097 = gen_lowpart (recog_data
.operand_mode
[1],
1098 recog_data
.operand
[0]);
1100 = emit_insn_before (gen_move_insn (dest
, recog_data
.operand
[1]), insn
);
1102 /* If this insn was the start of a basic block,
1103 include the new insn in that block.
1104 We need not check for code_label here;
1105 while a basic block can start with a code_label,
1106 INSN could not be at the beginning of that block. */
1107 if (previnsn
== 0 || JUMP_P (previnsn
))
1111 if (insn
== BB_HEAD (b
))
1112 BB_HEAD (b
) = newinsn
;
1115 /* This makes one more setting of new insns's dest. */
1116 REG_N_SETS (REGNO (recog_data
.operand
[0]))++;
1117 REG_N_REFS (REGNO (recog_data
.operand
[0]))++;
1118 REG_FREQ (REGNO (recog_data
.operand
[0])) += frequency
;
1120 *recog_data
.operand_loc
[1] = recog_data
.operand
[0];
1121 REG_N_REFS (REGNO (recog_data
.operand
[0]))++;
1122 REG_FREQ (REGNO (recog_data
.operand
[0])) += frequency
;
1123 for (i
= recog_data
.n_dups
- 1; i
>= 0; i
--)
1124 if (recog_data
.dup_num
[i
] == 1)
1126 *recog_data
.dup_loc
[i
] = recog_data
.operand
[0];
1127 REG_N_REFS (REGNO (recog_data
.operand
[0]))++;
1128 REG_FREQ (REGNO (recog_data
.operand
[0])) += frequency
;
1131 return PREV_INSN (newinsn
);
1134 record_operand_costs (insn
, op_costs
, reg_pref
);
1136 /* Now add the cost for each operand to the total costs for
1139 for (i
= 0; i
< recog_data
.n_operands
; i
++)
1140 if (REG_P (recog_data
.operand
[i
])
1141 && REGNO (recog_data
.operand
[i
]) >= FIRST_PSEUDO_REGISTER
)
1143 int regno
= REGNO (recog_data
.operand
[i
]);
1144 struct costs
*p
= &costs
[regno
], *q
= &op_costs
[i
];
1146 p
->mem_cost
+= q
->mem_cost
* frequency
;
1147 for (j
= 0; j
< N_REG_CLASSES
; j
++)
1148 p
->cost
[j
] += q
->cost
[j
] * frequency
;
1154 /* Initialize information about which register classes can be used for
1155 pseudos that are auto-incremented or auto-decremented. */
1158 init_reg_autoinc (void)
1160 #ifdef FORBIDDEN_INC_DEC_CLASSES
1163 for (i
= 0; i
< N_REG_CLASSES
; i
++)
1165 rtx r
= gen_rtx_raw_REG (VOIDmode
, 0);
1166 enum machine_mode m
;
1169 for (j
= 0; j
< FIRST_PSEUDO_REGISTER
; j
++)
1170 if (TEST_HARD_REG_BIT (reg_class_contents
[i
], j
))
1174 for (m
= VOIDmode
; (int) m
< (int) MAX_MACHINE_MODE
;
1175 m
= (enum machine_mode
) ((int) m
+ 1))
1176 if (HARD_REGNO_MODE_OK (j
, m
))
1180 /* If a register is not directly suitable for an
1181 auto-increment or decrement addressing mode and
1182 requires secondary reloads, disallow its class from
1183 being used in such addresses. */
1186 #ifdef SECONDARY_RELOAD_CLASS
1187 || (SECONDARY_RELOAD_CLASS (MODE_BASE_REG_CLASS (VOIDmode
), m
, r
)
1190 #ifdef SECONDARY_INPUT_RELOAD_CLASS
1191 || (SECONDARY_INPUT_RELOAD_CLASS (MODE_BASE_REG_CLASS (VOIDmode
), m
, r
)
1194 #ifdef SECONDARY_OUTPUT_RELOAD_CLASS
1195 || (SECONDARY_OUTPUT_RELOAD_CLASS (MODE_BASE_REG_CLASS (VOIDmode
), m
, r
)
1200 && ! auto_inc_dec_reg_p (r
, m
))
1201 forbidden_inc_dec_class
[i
] = 1;
1205 #endif /* FORBIDDEN_INC_DEC_CLASSES */
1208 /* This is a pass of the compiler that scans all instructions
1209 and calculates the preferred class for each pseudo-register.
1210 This information can be accessed later by calling `reg_preferred_class'.
1211 This pass comes just before local register allocation. */
1214 regclass (rtx f
, int nregs
, FILE *dump
)
1222 costs
= xmalloc (nregs
* sizeof (struct costs
));
1224 #ifdef FORBIDDEN_INC_DEC_CLASSES
1226 in_inc_dec
= xmalloc (nregs
);
1228 #endif /* FORBIDDEN_INC_DEC_CLASSES */
1230 /* Normally we scan the insns once and determine the best class to use for
1231 each register. However, if -fexpensive_optimizations are on, we do so
1232 twice, the second time using the tentative best classes to guide the
1235 for (pass
= 0; pass
<= flag_expensive_optimizations
; pass
++)
1240 fprintf (dump
, "\n\nPass %i\n\n",pass
);
1241 /* Zero out our accumulation of the cost of each class for each reg. */
1243 memset (costs
, 0, nregs
* sizeof (struct costs
));
1245 #ifdef FORBIDDEN_INC_DEC_CLASSES
1246 memset (in_inc_dec
, 0, nregs
);
1249 /* Scan the instructions and record each time it would
1250 save code to put a certain register in a certain class. */
1254 frequency
= REG_FREQ_MAX
;
1255 for (insn
= f
; insn
; insn
= NEXT_INSN (insn
))
1256 insn
= scan_one_insn (insn
, pass
);
1261 /* Show that an insn inside a loop is likely to be executed three
1262 times more than insns outside a loop. This is much more
1263 aggressive than the assumptions made elsewhere and is being
1264 tried as an experiment. */
1265 frequency
= REG_FREQ_FROM_BB (bb
);
1266 for (insn
= BB_HEAD (bb
); ; insn
= NEXT_INSN (insn
))
1268 insn
= scan_one_insn (insn
, pass
);
1269 if (insn
== BB_END (bb
))
1274 /* Now for each register look at how desirable each class is
1275 and find which class is preferred. Store that in
1276 `prefclass'. Record in `altclass' the largest register
1277 class any of whose registers is better than memory. */
1280 reg_pref
= reg_pref_buffer
;
1284 dump_regclass (dump
);
1285 fprintf (dump
,"\n");
1287 for (i
= FIRST_PSEUDO_REGISTER
; i
< nregs
; i
++)
1289 int best_cost
= (1 << (HOST_BITS_PER_INT
- 2)) - 1;
1290 enum reg_class best
= ALL_REGS
, alt
= NO_REGS
;
1291 /* This is an enum reg_class, but we call it an int
1292 to save lots of casts. */
1294 struct costs
*p
= &costs
[i
];
1296 /* In non-optimizing compilation REG_N_REFS is not initialized
1298 if (optimize
&& !REG_N_REFS (i
) && !REG_N_SETS (i
))
1301 for (class = (int) ALL_REGS
- 1; class > 0; class--)
1303 /* Ignore classes that are too small for this operand or
1304 invalid for an operand that was auto-incremented. */
1305 if (!contains_reg_of_mode
[class][PSEUDO_REGNO_MODE (i
)]
1306 #ifdef FORBIDDEN_INC_DEC_CLASSES
1307 || (in_inc_dec
[i
] && forbidden_inc_dec_class
[class])
1309 #ifdef CANNOT_CHANGE_MODE_CLASS
1310 || invalid_mode_change_p (i
, (enum reg_class
) class,
1311 PSEUDO_REGNO_MODE (i
))
1315 else if (p
->cost
[class] < best_cost
)
1317 best_cost
= p
->cost
[class];
1318 best
= (enum reg_class
) class;
1320 else if (p
->cost
[class] == best_cost
)
1321 best
= reg_class_subunion
[(int) best
][class];
1324 /* Record the alternate register class; i.e., a class for which
1325 every register in it is better than using memory. If adding a
1326 class would make a smaller class (i.e., no union of just those
1327 classes exists), skip that class. The major unions of classes
1328 should be provided as a register class. Don't do this if we
1329 will be doing it again later. */
1331 if ((pass
== 1 || dump
) || ! flag_expensive_optimizations
)
1332 for (class = 0; class < N_REG_CLASSES
; class++)
1333 if (p
->cost
[class] < p
->mem_cost
1334 && (reg_class_size
[(int) reg_class_subunion
[(int) alt
][class]]
1335 > reg_class_size
[(int) alt
])
1336 #ifdef FORBIDDEN_INC_DEC_CLASSES
1337 && ! (in_inc_dec
[i
] && forbidden_inc_dec_class
[class])
1339 #ifdef CANNOT_CHANGE_MODE_CLASS
1340 && ! invalid_mode_change_p (i
, (enum reg_class
) class,
1341 PSEUDO_REGNO_MODE (i
))
1344 alt
= reg_class_subunion
[(int) alt
][class];
1346 /* If we don't add any classes, nothing to try. */
1351 && (reg_pref
[i
].prefclass
!= (int) best
1352 || reg_pref
[i
].altclass
!= (int) alt
))
1354 static const char *const reg_class_names
[] = REG_CLASS_NAMES
;
1355 fprintf (dump
, " Register %i", i
);
1356 if (alt
== ALL_REGS
|| best
== ALL_REGS
)
1357 fprintf (dump
, " pref %s\n", reg_class_names
[(int) best
]);
1358 else if (alt
== NO_REGS
)
1359 fprintf (dump
, " pref %s or none\n", reg_class_names
[(int) best
]);
1361 fprintf (dump
, " pref %s, else %s\n",
1362 reg_class_names
[(int) best
],
1363 reg_class_names
[(int) alt
]);
1366 /* We cast to (int) because (char) hits bugs in some compilers. */
1367 reg_pref
[i
].prefclass
= (int) best
;
1368 reg_pref
[i
].altclass
= (int) alt
;
1372 #ifdef FORBIDDEN_INC_DEC_CLASSES
1378 /* Record the cost of using memory or registers of various classes for
1379 the operands in INSN.
1381 N_ALTS is the number of alternatives.
1383 N_OPS is the number of operands.
1385 OPS is an array of the operands.
1387 MODES are the modes of the operands, in case any are VOIDmode.
1389 CONSTRAINTS are the constraints to use for the operands. This array
1390 is modified by this procedure.
1392 This procedure works alternative by alternative. For each alternative
1393 we assume that we will be able to allocate all pseudos to their ideal
1394 register class and calculate the cost of using that alternative. Then
1395 we compute for each operand that is a pseudo-register, the cost of
1396 having the pseudo allocated to each register class and using it in that
1397 alternative. To this cost is added the cost of the alternative.
1399 The cost of each class for this insn is its lowest cost among all the
1403 record_reg_classes (int n_alts
, int n_ops
, rtx
*ops
,
1404 enum machine_mode
*modes
, const char **constraints
,
1405 rtx insn
, struct costs
*op_costs
,
1406 struct reg_pref
*reg_pref
)
1412 /* Process each alternative, each time minimizing an operand's cost with
1413 the cost for each operand in that alternative. */
1415 for (alt
= 0; alt
< n_alts
; alt
++)
1417 struct costs this_op_costs
[MAX_RECOG_OPERANDS
];
1420 enum reg_class classes
[MAX_RECOG_OPERANDS
];
1421 int allows_mem
[MAX_RECOG_OPERANDS
];
1424 for (i
= 0; i
< n_ops
; i
++)
1426 const char *p
= constraints
[i
];
1428 enum machine_mode mode
= modes
[i
];
1429 int allows_addr
= 0;
1433 /* Initially show we know nothing about the register class. */
1434 classes
[i
] = NO_REGS
;
1437 /* If this operand has no constraints at all, we can conclude
1438 nothing about it since anything is valid. */
1442 if (REG_P (op
) && REGNO (op
) >= FIRST_PSEUDO_REGISTER
)
1443 memset (&this_op_costs
[i
], 0, sizeof this_op_costs
[i
]);
1448 /* If this alternative is only relevant when this operand
1449 matches a previous operand, we do different things depending
1450 on whether this operand is a pseudo-reg or not. We must process
1451 any modifiers for the operand before we can make this test. */
1453 while (*p
== '%' || *p
== '=' || *p
== '+' || *p
== '&')
1456 if (p
[0] >= '0' && p
[0] <= '0' + i
&& (p
[1] == ',' || p
[1] == 0))
1458 /* Copy class and whether memory is allowed from the matching
1459 alternative. Then perform any needed cost computations
1460 and/or adjustments. */
1462 classes
[i
] = classes
[j
];
1463 allows_mem
[i
] = allows_mem
[j
];
1465 if (!REG_P (op
) || REGNO (op
) < FIRST_PSEUDO_REGISTER
)
1467 /* If this matches the other operand, we have no added
1469 if (rtx_equal_p (ops
[j
], op
))
1472 /* If we can put the other operand into a register, add to
1473 the cost of this alternative the cost to copy this
1474 operand to the register used for the other operand. */
1476 else if (classes
[j
] != NO_REGS
)
1477 alt_cost
+= copy_cost (op
, mode
, classes
[j
], 1), win
= 1;
1479 else if (!REG_P (ops
[j
])
1480 || REGNO (ops
[j
]) < FIRST_PSEUDO_REGISTER
)
1482 /* This op is a pseudo but the one it matches is not. */
1484 /* If we can't put the other operand into a register, this
1485 alternative can't be used. */
1487 if (classes
[j
] == NO_REGS
)
1490 /* Otherwise, add to the cost of this alternative the cost
1491 to copy the other operand to the register used for this
1495 alt_cost
+= copy_cost (ops
[j
], mode
, classes
[j
], 1);
1499 /* The costs of this operand are not the same as the other
1500 operand since move costs are not symmetric. Moreover,
1501 if we cannot tie them, this alternative needs to do a
1502 copy, which is one instruction. */
1504 struct costs
*pp
= &this_op_costs
[i
];
1506 for (class = 0; class < N_REG_CLASSES
; class++)
1508 = ((recog_data
.operand_type
[i
] != OP_OUT
1509 ? may_move_in_cost
[mode
][class][(int) classes
[i
]]
1511 + (recog_data
.operand_type
[i
] != OP_IN
1512 ? may_move_out_cost
[mode
][(int) classes
[i
]][class]
1515 /* If the alternative actually allows memory, make things
1516 a bit cheaper since we won't need an extra insn to
1520 = ((recog_data
.operand_type
[i
] != OP_IN
1521 ? MEMORY_MOVE_COST (mode
, classes
[i
], 0)
1523 + (recog_data
.operand_type
[i
] != OP_OUT
1524 ? MEMORY_MOVE_COST (mode
, classes
[i
], 1)
1525 : 0) - allows_mem
[i
]);
1527 /* If we have assigned a class to this register in our
1528 first pass, add a cost to this alternative corresponding
1529 to what we would add if this register were not in the
1530 appropriate class. */
1534 += (may_move_in_cost
[mode
]
1535 [(unsigned char) reg_pref
[REGNO (op
)].prefclass
]
1536 [(int) classes
[i
]]);
1538 if (REGNO (ops
[i
]) != REGNO (ops
[j
])
1539 && ! find_reg_note (insn
, REG_DEAD
, op
))
1542 /* This is in place of ordinary cost computation
1543 for this operand, so skip to the end of the
1544 alternative (should be just one character). */
1545 while (*p
&& *p
++ != ',')
1553 /* Scan all the constraint letters. See if the operand matches
1554 any of the constraints. Collect the valid register classes
1555 and see if this operand accepts memory. */
1564 /* Ignore the next letter for this pass. */
1570 case '!': case '#': case '&':
1571 case '0': case '1': case '2': case '3': case '4':
1572 case '5': case '6': case '7': case '8': case '9':
1577 win
= address_operand (op
, GET_MODE (op
));
1578 /* We know this operand is an address, so we want it to be
1579 allocated to a register that can be the base of an
1580 address, i.e. BASE_REG_CLASS. */
1582 = reg_class_subunion
[(int) classes
[i
]]
1583 [(int) MODE_BASE_REG_CLASS (VOIDmode
)];
1586 case 'm': case 'o': case 'V':
1587 /* It doesn't seem worth distinguishing between offsettable
1588 and non-offsettable addresses here. */
1596 && (GET_CODE (XEXP (op
, 0)) == PRE_DEC
1597 || GET_CODE (XEXP (op
, 0)) == POST_DEC
))
1603 && (GET_CODE (XEXP (op
, 0)) == PRE_INC
1604 || GET_CODE (XEXP (op
, 0)) == POST_INC
))
1610 if (GET_CODE (op
) == CONST_DOUBLE
1611 || (GET_CODE (op
) == CONST_VECTOR
1612 && (GET_MODE_CLASS (GET_MODE (op
))
1613 == MODE_VECTOR_FLOAT
)))
1619 if (GET_CODE (op
) == CONST_DOUBLE
1620 && CONST_DOUBLE_OK_FOR_CONSTRAINT_P (op
, c
, p
))
1625 if (GET_CODE (op
) == CONST_INT
1626 || (GET_CODE (op
) == CONST_DOUBLE
1627 && GET_MODE (op
) == VOIDmode
))
1631 && (! flag_pic
|| LEGITIMATE_PIC_OPERAND_P (op
)))
1636 if (GET_CODE (op
) == CONST_INT
1637 || (GET_CODE (op
) == CONST_DOUBLE
1638 && GET_MODE (op
) == VOIDmode
))
1650 if (GET_CODE (op
) == CONST_INT
1651 && CONST_OK_FOR_CONSTRAINT_P (INTVAL (op
), c
, p
))
1662 && (! flag_pic
|| LEGITIMATE_PIC_OPERAND_P (op
))))
1667 = reg_class_subunion
[(int) classes
[i
]][(int) GENERAL_REGS
];
1671 if (REG_CLASS_FROM_CONSTRAINT (c
, p
) != NO_REGS
)
1673 = reg_class_subunion
[(int) classes
[i
]]
1674 [(int) REG_CLASS_FROM_CONSTRAINT (c
, p
)];
1675 #ifdef EXTRA_CONSTRAINT_STR
1676 else if (EXTRA_CONSTRAINT_STR (op
, c
, p
))
1679 if (EXTRA_MEMORY_CONSTRAINT (c
, p
))
1681 /* Every MEM can be reloaded to fit. */
1686 if (EXTRA_ADDRESS_CONSTRAINT (c
, p
))
1688 /* Every address can be reloaded to fit. */
1690 if (address_operand (op
, GET_MODE (op
)))
1692 /* We know this operand is an address, so we want it to
1693 be allocated to a register that can be the base of an
1694 address, i.e. BASE_REG_CLASS. */
1696 = reg_class_subunion
[(int) classes
[i
]]
1697 [(int) MODE_BASE_REG_CLASS (VOIDmode
)];
1702 p
+= CONSTRAINT_LEN (c
, p
);
1709 /* How we account for this operand now depends on whether it is a
1710 pseudo register or not. If it is, we first check if any
1711 register classes are valid. If not, we ignore this alternative,
1712 since we want to assume that all pseudos get allocated for
1713 register preferencing. If some register class is valid, compute
1714 the costs of moving the pseudo into that class. */
1716 if (REG_P (op
) && REGNO (op
) >= FIRST_PSEUDO_REGISTER
)
1718 if (classes
[i
] == NO_REGS
)
1720 /* We must always fail if the operand is a REG, but
1721 we did not find a suitable class.
1723 Otherwise we may perform an uninitialized read
1724 from this_op_costs after the `continue' statement
1730 struct costs
*pp
= &this_op_costs
[i
];
1732 for (class = 0; class < N_REG_CLASSES
; class++)
1734 = ((recog_data
.operand_type
[i
] != OP_OUT
1735 ? may_move_in_cost
[mode
][class][(int) classes
[i
]]
1737 + (recog_data
.operand_type
[i
] != OP_IN
1738 ? may_move_out_cost
[mode
][(int) classes
[i
]][class]
1741 /* If the alternative actually allows memory, make things
1742 a bit cheaper since we won't need an extra insn to
1746 = ((recog_data
.operand_type
[i
] != OP_IN
1747 ? MEMORY_MOVE_COST (mode
, classes
[i
], 0)
1749 + (recog_data
.operand_type
[i
] != OP_OUT
1750 ? MEMORY_MOVE_COST (mode
, classes
[i
], 1)
1751 : 0) - allows_mem
[i
]);
1753 /* If we have assigned a class to this register in our
1754 first pass, add a cost to this alternative corresponding
1755 to what we would add if this register were not in the
1756 appropriate class. */
1760 += (may_move_in_cost
[mode
]
1761 [(unsigned char) reg_pref
[REGNO (op
)].prefclass
]
1762 [(int) classes
[i
]]);
1766 /* Otherwise, if this alternative wins, either because we
1767 have already determined that or if we have a hard register of
1768 the proper class, there is no cost for this alternative. */
1772 && reg_fits_class_p (op
, classes
[i
], 0, GET_MODE (op
))))
1775 /* If registers are valid, the cost of this alternative includes
1776 copying the object to and/or from a register. */
1778 else if (classes
[i
] != NO_REGS
)
1780 if (recog_data
.operand_type
[i
] != OP_OUT
)
1781 alt_cost
+= copy_cost (op
, mode
, classes
[i
], 1);
1783 if (recog_data
.operand_type
[i
] != OP_IN
)
1784 alt_cost
+= copy_cost (op
, mode
, classes
[i
], 0);
1787 /* The only other way this alternative can be used is if this is a
1788 constant that could be placed into memory. */
1790 else if (CONSTANT_P (op
) && (allows_addr
|| allows_mem
[i
]))
1791 alt_cost
+= MEMORY_MOVE_COST (mode
, classes
[i
], 1);
1799 /* Finally, update the costs with the information we've calculated
1800 about this alternative. */
1802 for (i
= 0; i
< n_ops
; i
++)
1804 && REGNO (ops
[i
]) >= FIRST_PSEUDO_REGISTER
)
1806 struct costs
*pp
= &op_costs
[i
], *qq
= &this_op_costs
[i
];
1807 int scale
= 1 + (recog_data
.operand_type
[i
] == OP_INOUT
);
1809 pp
->mem_cost
= MIN (pp
->mem_cost
,
1810 (qq
->mem_cost
+ alt_cost
) * scale
);
1812 for (class = 0; class < N_REG_CLASSES
; class++)
1813 pp
->cost
[class] = MIN (pp
->cost
[class],
1814 (qq
->cost
[class] + alt_cost
) * scale
);
1818 /* If this insn is a single set copying operand 1 to operand 0
1819 and one operand is a pseudo with the other a hard reg or a pseudo
1820 that prefers a register that is in its own register class then
1821 we may want to adjust the cost of that register class to -1.
1823 Avoid the adjustment if the source does not die to avoid stressing of
1824 register allocator by preferrencing two colliding registers into single
1827 Also avoid the adjustment if a copy between registers of the class
1828 is expensive (ten times the cost of a default copy is considered
1829 arbitrarily expensive). This avoids losing when the preferred class
1830 is very expensive as the source of a copy instruction. */
1832 if ((set
= single_set (insn
)) != 0
1833 && ops
[0] == SET_DEST (set
) && ops
[1] == SET_SRC (set
)
1834 && REG_P (ops
[0]) && REG_P (ops
[1])
1835 && find_regno_note (insn
, REG_DEAD
, REGNO (ops
[1])))
1836 for (i
= 0; i
<= 1; i
++)
1837 if (REGNO (ops
[i
]) >= FIRST_PSEUDO_REGISTER
)
1839 unsigned int regno
= REGNO (ops
[!i
]);
1840 enum machine_mode mode
= GET_MODE (ops
[!i
]);
1844 if (regno
>= FIRST_PSEUDO_REGISTER
&& reg_pref
!= 0)
1846 enum reg_class pref
= reg_pref
[regno
].prefclass
;
1848 if ((reg_class_size
[(unsigned char) pref
]
1849 == (unsigned) CLASS_MAX_NREGS (pref
, mode
))
1850 && REGISTER_MOVE_COST (mode
, pref
, pref
) < 10 * 2)
1851 op_costs
[i
].cost
[(unsigned char) pref
] = -1;
1853 else if (regno
< FIRST_PSEUDO_REGISTER
)
1854 for (class = 0; class < N_REG_CLASSES
; class++)
1855 if (TEST_HARD_REG_BIT (reg_class_contents
[class], regno
)
1856 && reg_class_size
[class] == (unsigned) CLASS_MAX_NREGS (class, mode
))
1858 if (reg_class_size
[class] == 1)
1859 op_costs
[i
].cost
[class] = -1;
1862 for (nr
= 0; nr
< (unsigned) hard_regno_nregs
[regno
][mode
]; nr
++)
1864 if (! TEST_HARD_REG_BIT (reg_class_contents
[class],
1869 if (nr
== (unsigned) hard_regno_nregs
[regno
][mode
])
1870 op_costs
[i
].cost
[class] = -1;
1876 /* Compute the cost of loading X into (if TO_P is nonzero) or from (if
1877 TO_P is zero) a register of class CLASS in mode MODE.
1879 X must not be a pseudo. */
1882 copy_cost (rtx x
, enum machine_mode mode ATTRIBUTE_UNUSED
,
1883 enum reg_class
class, int to_p ATTRIBUTE_UNUSED
)
1885 #ifdef HAVE_SECONDARY_RELOADS
1886 enum reg_class secondary_class
= NO_REGS
;
1889 /* If X is a SCRATCH, there is actually nothing to move since we are
1890 assuming optimal allocation. */
1892 if (GET_CODE (x
) == SCRATCH
)
1895 /* Get the class we will actually use for a reload. */
1896 class = PREFERRED_RELOAD_CLASS (x
, class);
1898 #ifdef HAVE_SECONDARY_RELOADS
1899 /* If we need a secondary reload (we assume here that we are using
1900 the secondary reload as an intermediate, not a scratch register), the
1901 cost is that to load the input into the intermediate register, then
1902 to copy them. We use a special value of TO_P to avoid recursion. */
1904 #ifdef SECONDARY_INPUT_RELOAD_CLASS
1906 secondary_class
= SECONDARY_INPUT_RELOAD_CLASS (class, mode
, x
);
1909 #ifdef SECONDARY_OUTPUT_RELOAD_CLASS
1911 secondary_class
= SECONDARY_OUTPUT_RELOAD_CLASS (class, mode
, x
);
1914 if (secondary_class
!= NO_REGS
)
1915 return (move_cost
[mode
][(int) secondary_class
][(int) class]
1916 + copy_cost (x
, mode
, secondary_class
, 2));
1917 #endif /* HAVE_SECONDARY_RELOADS */
1919 /* For memory, use the memory move cost, for (hard) registers, use the
1920 cost to move between the register classes, and use 2 for everything
1921 else (constants). */
1923 if (MEM_P (x
) || class == NO_REGS
)
1924 return MEMORY_MOVE_COST (mode
, class, to_p
);
1927 return move_cost
[mode
][(int) REGNO_REG_CLASS (REGNO (x
))][(int) class];
1930 /* If this is a constant, we may eventually want to call rtx_cost here. */
1931 return COSTS_N_INSNS (1);
1934 /* Record the pseudo registers we must reload into hard registers
1935 in a subexpression of a memory address, X.
1937 CLASS is the class that the register needs to be in and is either
1938 BASE_REG_CLASS or INDEX_REG_CLASS.
1940 SCALE is twice the amount to multiply the cost by (it is twice so we
1941 can represent half-cost adjustments). */
1944 record_address_regs (rtx x
, enum reg_class
class, int scale
)
1946 enum rtx_code code
= GET_CODE (x
);
1959 /* When we have an address that is a sum,
1960 we must determine whether registers are "base" or "index" regs.
1961 If there is a sum of two registers, we must choose one to be
1962 the "base". Luckily, we can use the REG_POINTER to make a good
1963 choice most of the time. We only need to do this on machines
1964 that can have two registers in an address and where the base
1965 and index register classes are different.
1967 ??? This code used to set REGNO_POINTER_FLAG in some cases, but
1968 that seems bogus since it should only be set when we are sure
1969 the register is being used as a pointer. */
1972 rtx arg0
= XEXP (x
, 0);
1973 rtx arg1
= XEXP (x
, 1);
1974 enum rtx_code code0
= GET_CODE (arg0
);
1975 enum rtx_code code1
= GET_CODE (arg1
);
1977 /* Look inside subregs. */
1978 if (code0
== SUBREG
)
1979 arg0
= SUBREG_REG (arg0
), code0
= GET_CODE (arg0
);
1980 if (code1
== SUBREG
)
1981 arg1
= SUBREG_REG (arg1
), code1
= GET_CODE (arg1
);
1983 /* If this machine only allows one register per address, it must
1984 be in the first operand. */
1986 if (MAX_REGS_PER_ADDRESS
== 1)
1987 record_address_regs (arg0
, class, scale
);
1989 /* If index and base registers are the same on this machine, just
1990 record registers in any non-constant operands. We assume here,
1991 as well as in the tests below, that all addresses are in
1994 else if (INDEX_REG_CLASS
== MODE_BASE_REG_CLASS (VOIDmode
))
1996 record_address_regs (arg0
, class, scale
);
1997 if (! CONSTANT_P (arg1
))
1998 record_address_regs (arg1
, class, scale
);
2001 /* If the second operand is a constant integer, it doesn't change
2002 what class the first operand must be. */
2004 else if (code1
== CONST_INT
|| code1
== CONST_DOUBLE
)
2005 record_address_regs (arg0
, class, scale
);
2007 /* If the second operand is a symbolic constant, the first operand
2008 must be an index register. */
2010 else if (code1
== SYMBOL_REF
|| code1
== CONST
|| code1
== LABEL_REF
)
2011 record_address_regs (arg0
, INDEX_REG_CLASS
, scale
);
2013 /* If both operands are registers but one is already a hard register
2014 of index or reg-base class, give the other the class that the
2015 hard register is not. */
2017 else if (code0
== REG
&& code1
== REG
2018 && REGNO (arg0
) < FIRST_PSEUDO_REGISTER
2019 && (REG_MODE_OK_FOR_REG_BASE_P (arg0
, VOIDmode
)
2020 || REG_OK_FOR_INDEX_P (arg0
)))
2021 record_address_regs (arg1
,
2022 REG_MODE_OK_FOR_REG_BASE_P (arg0
, VOIDmode
)
2024 : MODE_BASE_REG_REG_CLASS (VOIDmode
),
2026 else if (code0
== REG
&& code1
== REG
2027 && REGNO (arg1
) < FIRST_PSEUDO_REGISTER
2028 && (REG_MODE_OK_FOR_REG_BASE_P (arg1
, VOIDmode
)
2029 || REG_OK_FOR_INDEX_P (arg1
)))
2030 record_address_regs (arg0
,
2031 REG_MODE_OK_FOR_REG_BASE_P (arg1
, VOIDmode
)
2033 : MODE_BASE_REG_REG_CLASS (VOIDmode
),
2036 /* If one operand is known to be a pointer, it must be the base
2037 with the other operand the index. Likewise if the other operand
2040 else if ((code0
== REG
&& REG_POINTER (arg0
))
2043 record_address_regs (arg0
, MODE_BASE_REG_REG_CLASS (VOIDmode
),
2045 record_address_regs (arg1
, INDEX_REG_CLASS
, scale
);
2047 else if ((code1
== REG
&& REG_POINTER (arg1
))
2050 record_address_regs (arg0
, INDEX_REG_CLASS
, scale
);
2051 record_address_regs (arg1
, MODE_BASE_REG_REG_CLASS (VOIDmode
),
2055 /* Otherwise, count equal chances that each might be a base
2056 or index register. This case should be rare. */
2060 record_address_regs (arg0
, MODE_BASE_REG_REG_CLASS (VOIDmode
),
2062 record_address_regs (arg0
, INDEX_REG_CLASS
, scale
/ 2);
2063 record_address_regs (arg1
, MODE_BASE_REG_REG_CLASS (VOIDmode
),
2065 record_address_regs (arg1
, INDEX_REG_CLASS
, scale
/ 2);
2070 /* Double the importance of a pseudo register that is incremented
2071 or decremented, since it would take two extra insns
2072 if it ends up in the wrong place. */
2075 record_address_regs (XEXP (x
, 0), MODE_BASE_REG_CLASS (VOIDmode
),
2077 if (REG_P (XEXP (XEXP (x
, 1), 1)))
2078 record_address_regs (XEXP (XEXP (x
, 1), 1),
2079 INDEX_REG_CLASS
, 2 * scale
);
2086 /* Double the importance of a pseudo register that is incremented
2087 or decremented, since it would take two extra insns
2088 if it ends up in the wrong place. If the operand is a pseudo,
2089 show it is being used in an INC_DEC context. */
2091 #ifdef FORBIDDEN_INC_DEC_CLASSES
2092 if (REG_P (XEXP (x
, 0))
2093 && REGNO (XEXP (x
, 0)) >= FIRST_PSEUDO_REGISTER
)
2094 in_inc_dec
[REGNO (XEXP (x
, 0))] = 1;
2097 record_address_regs (XEXP (x
, 0), class, 2 * scale
);
2102 struct costs
*pp
= &costs
[REGNO (x
)];
2105 pp
->mem_cost
+= (MEMORY_MOVE_COST (Pmode
, class, 1) * scale
) / 2;
2107 for (i
= 0; i
< N_REG_CLASSES
; i
++)
2108 pp
->cost
[i
] += (may_move_in_cost
[Pmode
][i
][(int) class] * scale
) / 2;
2114 const char *fmt
= GET_RTX_FORMAT (code
);
2116 for (i
= GET_RTX_LENGTH (code
) - 1; i
>= 0; i
--)
2118 record_address_regs (XEXP (x
, i
), class, scale
);
2123 #ifdef FORBIDDEN_INC_DEC_CLASSES
2125 /* Return 1 if REG is valid as an auto-increment memory reference
2126 to an object of MODE. */
2129 auto_inc_dec_reg_p (rtx reg
, enum machine_mode mode
)
2131 if (HAVE_POST_INCREMENT
2132 && memory_address_p (mode
, gen_rtx_POST_INC (Pmode
, reg
)))
2135 if (HAVE_POST_DECREMENT
2136 && memory_address_p (mode
, gen_rtx_POST_DEC (Pmode
, reg
)))
2139 if (HAVE_PRE_INCREMENT
2140 && memory_address_p (mode
, gen_rtx_PRE_INC (Pmode
, reg
)))
2143 if (HAVE_PRE_DECREMENT
2144 && memory_address_p (mode
, gen_rtx_PRE_DEC (Pmode
, reg
)))
2151 static short *renumber
;
2152 static size_t regno_allocated
;
2153 static unsigned int reg_n_max
;
2155 /* Allocate enough space to hold NUM_REGS registers for the tables used for
2156 reg_scan and flow_analysis that are indexed by the register number. If
2157 NEW_P is nonzero, initialize all of the registers, otherwise only
2158 initialize the new registers allocated. The same table is kept from
2159 function to function, only reallocating it when we need more room. If
2160 RENUMBER_P is nonzero, allocate the reg_renumber array also. */
2163 allocate_reg_info (size_t num_regs
, int new_p
, int renumber_p
)
2166 size_t size_renumber
;
2167 size_t min
= (new_p
) ? 0 : reg_n_max
;
2168 struct reg_info_data
*reg_data
;
2170 if (num_regs
> regno_allocated
)
2172 size_t old_allocated
= regno_allocated
;
2174 regno_allocated
= num_regs
+ (num_regs
/ 20); /* Add some slop space. */
2175 size_renumber
= regno_allocated
* sizeof (short);
2179 VARRAY_REG_INIT (reg_n_info
, regno_allocated
, "reg_n_info");
2180 renumber
= xmalloc (size_renumber
);
2181 reg_pref_buffer
= xmalloc (regno_allocated
2182 * sizeof (struct reg_pref
));
2187 VARRAY_GROW (reg_n_info
, regno_allocated
);
2189 if (new_p
) /* If we're zapping everything, no need to realloc. */
2191 free ((char *) renumber
);
2192 free ((char *) reg_pref
);
2193 renumber
= xmalloc (size_renumber
);
2194 reg_pref_buffer
= xmalloc (regno_allocated
2195 * sizeof (struct reg_pref
));
2200 renumber
= xrealloc (renumber
, size_renumber
);
2201 reg_pref_buffer
= xrealloc (reg_pref_buffer
,
2203 * sizeof (struct reg_pref
));
2207 size_info
= (regno_allocated
- old_allocated
) * sizeof (reg_info
)
2208 + sizeof (struct reg_info_data
) - sizeof (reg_info
);
2209 reg_data
= xcalloc (size_info
, 1);
2210 reg_data
->min_index
= old_allocated
;
2211 reg_data
->max_index
= regno_allocated
- 1;
2212 reg_data
->next
= reg_info_head
;
2213 reg_info_head
= reg_data
;
2216 reg_n_max
= num_regs
;
2219 /* Loop through each of the segments allocated for the actual
2220 reg_info pages, and set up the pointers, zero the pages, etc. */
2221 for (reg_data
= reg_info_head
;
2222 reg_data
&& reg_data
->max_index
>= min
;
2223 reg_data
= reg_data
->next
)
2225 size_t min_index
= reg_data
->min_index
;
2226 size_t max_index
= reg_data
->max_index
;
2227 size_t max
= MIN (max_index
, num_regs
);
2228 size_t local_min
= min
- min_index
;
2231 if (reg_data
->min_index
> num_regs
)
2234 if (min
< min_index
)
2236 if (!reg_data
->used_p
) /* page just allocated with calloc */
2237 reg_data
->used_p
= 1; /* no need to zero */
2239 memset (®_data
->data
[local_min
], 0,
2240 sizeof (reg_info
) * (max
- min_index
- local_min
+ 1));
2242 for (i
= min_index
+local_min
; i
<= max
; i
++)
2244 VARRAY_REG (reg_n_info
, i
) = ®_data
->data
[i
-min_index
];
2245 REG_BASIC_BLOCK (i
) = REG_BLOCK_UNKNOWN
;
2247 reg_pref_buffer
[i
].prefclass
= (char) NO_REGS
;
2248 reg_pref_buffer
[i
].altclass
= (char) NO_REGS
;
2253 /* If {pref,alt}class have already been allocated, update the pointers to
2254 the newly realloced ones. */
2256 reg_pref
= reg_pref_buffer
;
2259 reg_renumber
= renumber
;
2261 /* Tell the regset code about the new number of registers. */
2262 MAX_REGNO_REG_SET (num_regs
, new_p
, renumber_p
);
2265 /* Free up the space allocated by allocate_reg_info. */
2267 free_reg_info (void)
2271 struct reg_info_data
*reg_data
;
2272 struct reg_info_data
*reg_next
;
2274 VARRAY_FREE (reg_n_info
);
2275 for (reg_data
= reg_info_head
; reg_data
; reg_data
= reg_next
)
2277 reg_next
= reg_data
->next
;
2278 free ((char *) reg_data
);
2281 free (reg_pref_buffer
);
2282 reg_pref_buffer
= (struct reg_pref
*) 0;
2283 reg_info_head
= (struct reg_info_data
*) 0;
2284 renumber
= (short *) 0;
2286 regno_allocated
= 0;
2290 /* This is the `regscan' pass of the compiler, run just before cse
2291 and again just before loop.
2293 It finds the first and last use of each pseudo-register
2294 and records them in the vectors regno_first_uid, regno_last_uid
2295 and counts the number of sets in the vector reg_n_sets.
2297 REPEAT is nonzero the second time this is called. */
2299 /* Maximum number of parallel sets and clobbers in any insn in this fn.
2300 Always at least 3, since the combiner could put that many together
2301 and we want this to remain correct for all the remaining passes.
2302 This corresponds to the maximum number of times note_stores will call
2303 a function for any insn. */
2307 /* Used as a temporary to record the largest number of registers in
2308 PARALLEL in a SET_DEST. This is added to max_parallel. */
2310 static int max_set_parallel
;
2313 reg_scan (rtx f
, unsigned int nregs
, int repeat ATTRIBUTE_UNUSED
)
2317 timevar_push (TV_REG_SCAN
);
2319 allocate_reg_info (nregs
, TRUE
, FALSE
);
2321 max_set_parallel
= 0;
2323 for (insn
= f
; insn
; insn
= NEXT_INSN (insn
))
2326 rtx pat
= PATTERN (insn
);
2327 if (GET_CODE (pat
) == PARALLEL
2328 && XVECLEN (pat
, 0) > max_parallel
)
2329 max_parallel
= XVECLEN (pat
, 0);
2330 reg_scan_mark_refs (pat
, insn
, 0, 0);
2332 if (REG_NOTES (insn
))
2333 reg_scan_mark_refs (REG_NOTES (insn
), insn
, 1, 0);
2336 max_parallel
+= max_set_parallel
;
2338 timevar_pop (TV_REG_SCAN
);
2341 /* Update 'regscan' information by looking at the insns
2342 from FIRST to LAST. Some new REGs have been created,
2343 and any REG with number greater than OLD_MAX_REGNO is
2344 such a REG. We only update information for those. */
2347 reg_scan_update (rtx first
, rtx last
, unsigned int old_max_regno
)
2351 allocate_reg_info (max_reg_num (), FALSE
, FALSE
);
2353 for (insn
= first
; insn
!= last
; insn
= NEXT_INSN (insn
))
2356 rtx pat
= PATTERN (insn
);
2357 if (GET_CODE (pat
) == PARALLEL
2358 && XVECLEN (pat
, 0) > max_parallel
)
2359 max_parallel
= XVECLEN (pat
, 0);
2360 reg_scan_mark_refs (pat
, insn
, 0, old_max_regno
);
2362 if (REG_NOTES (insn
))
2363 reg_scan_mark_refs (REG_NOTES (insn
), insn
, 1, old_max_regno
);
2367 /* X is the expression to scan. INSN is the insn it appears in.
2368 NOTE_FLAG is nonzero if X is from INSN's notes rather than its body.
2369 We should only record information for REGs with numbers
2370 greater than or equal to MIN_REGNO. */
2373 reg_scan_mark_refs (rtx x
, rtx insn
, int note_flag
, unsigned int min_regno
)
2381 code
= GET_CODE (x
);
2398 unsigned int regno
= REGNO (x
);
2400 if (regno
>= min_regno
)
2403 REGNO_LAST_UID (regno
) = INSN_UID (insn
);
2404 if (REGNO_FIRST_UID (regno
) == 0)
2405 REGNO_FIRST_UID (regno
) = INSN_UID (insn
);
2406 /* If we are called by reg_scan_update() (indicated by min_regno
2407 being set), we also need to update the reference count. */
2409 REG_N_REFS (regno
)++;
2416 reg_scan_mark_refs (XEXP (x
, 0), insn
, note_flag
, min_regno
);
2418 reg_scan_mark_refs (XEXP (x
, 1), insn
, note_flag
, min_regno
);
2423 reg_scan_mark_refs (XEXP (x
, 1), insn
, note_flag
, min_regno
);
2428 rtx reg
= XEXP (x
, 0);
2430 && REGNO (reg
) >= min_regno
)
2432 REG_N_SETS (REGNO (reg
))++;
2433 REG_N_REFS (REGNO (reg
))++;
2435 else if (MEM_P (reg
))
2436 reg_scan_mark_refs (XEXP (reg
, 0), insn
, note_flag
, min_regno
);
2441 /* Count a set of the destination if it is a register. */
2442 for (dest
= SET_DEST (x
);
2443 GET_CODE (dest
) == SUBREG
|| GET_CODE (dest
) == STRICT_LOW_PART
2444 || GET_CODE (dest
) == ZERO_EXTEND
;
2445 dest
= XEXP (dest
, 0))
2448 /* For a PARALLEL, record the number of things (less the usual one for a
2449 SET) that are set. */
2450 if (GET_CODE (dest
) == PARALLEL
)
2451 max_set_parallel
= MAX (max_set_parallel
, XVECLEN (dest
, 0) - 1);
2454 && REGNO (dest
) >= min_regno
)
2456 REG_N_SETS (REGNO (dest
))++;
2457 REG_N_REFS (REGNO (dest
))++;
2460 /* If this is setting a pseudo from another pseudo or the sum of a
2461 pseudo and a constant integer and the other pseudo is known to be
2462 a pointer, set the destination to be a pointer as well.
2464 Likewise if it is setting the destination from an address or from a
2465 value equivalent to an address or to the sum of an address and
2468 But don't do any of this if the pseudo corresponds to a user
2469 variable since it should have already been set as a pointer based
2472 if (REG_P (SET_DEST (x
))
2473 && REGNO (SET_DEST (x
)) >= FIRST_PSEUDO_REGISTER
2474 && REGNO (SET_DEST (x
)) >= min_regno
2475 /* If the destination pseudo is set more than once, then other
2476 sets might not be to a pointer value (consider access to a
2477 union in two threads of control in the presence of global
2478 optimizations). So only set REG_POINTER on the destination
2479 pseudo if this is the only set of that pseudo. */
2480 && REG_N_SETS (REGNO (SET_DEST (x
))) == 1
2481 && ! REG_USERVAR_P (SET_DEST (x
))
2482 && ! REG_POINTER (SET_DEST (x
))
2483 && ((REG_P (SET_SRC (x
))
2484 && REG_POINTER (SET_SRC (x
)))
2485 || ((GET_CODE (SET_SRC (x
)) == PLUS
2486 || GET_CODE (SET_SRC (x
)) == LO_SUM
)
2487 && GET_CODE (XEXP (SET_SRC (x
), 1)) == CONST_INT
2488 && REG_P (XEXP (SET_SRC (x
), 0))
2489 && REG_POINTER (XEXP (SET_SRC (x
), 0)))
2490 || GET_CODE (SET_SRC (x
)) == CONST
2491 || GET_CODE (SET_SRC (x
)) == SYMBOL_REF
2492 || GET_CODE (SET_SRC (x
)) == LABEL_REF
2493 || (GET_CODE (SET_SRC (x
)) == HIGH
2494 && (GET_CODE (XEXP (SET_SRC (x
), 0)) == CONST
2495 || GET_CODE (XEXP (SET_SRC (x
), 0)) == SYMBOL_REF
2496 || GET_CODE (XEXP (SET_SRC (x
), 0)) == LABEL_REF
))
2497 || ((GET_CODE (SET_SRC (x
)) == PLUS
2498 || GET_CODE (SET_SRC (x
)) == LO_SUM
)
2499 && (GET_CODE (XEXP (SET_SRC (x
), 1)) == CONST
2500 || GET_CODE (XEXP (SET_SRC (x
), 1)) == SYMBOL_REF
2501 || GET_CODE (XEXP (SET_SRC (x
), 1)) == LABEL_REF
))
2502 || ((note
= find_reg_note (insn
, REG_EQUAL
, 0)) != 0
2503 && (GET_CODE (XEXP (note
, 0)) == CONST
2504 || GET_CODE (XEXP (note
, 0)) == SYMBOL_REF
2505 || GET_CODE (XEXP (note
, 0)) == LABEL_REF
))))
2506 REG_POINTER (SET_DEST (x
)) = 1;
2508 /* If this is setting a register from a register or from a simple
2509 conversion of a register, propagate REG_EXPR. */
2512 rtx src
= SET_SRC (x
);
2514 while (GET_CODE (src
) == SIGN_EXTEND
2515 || GET_CODE (src
) == ZERO_EXTEND
2516 || GET_CODE (src
) == TRUNCATE
2517 || (GET_CODE (src
) == SUBREG
&& subreg_lowpart_p (src
)))
2518 src
= XEXP (src
, 0);
2520 if (!REG_ATTRS (dest
) && REG_P (src
))
2521 REG_ATTRS (dest
) = REG_ATTRS (src
);
2522 if (!REG_ATTRS (dest
) && MEM_P (src
))
2523 set_reg_attrs_from_mem (dest
, src
);
2526 /* ... fall through ... */
2530 const char *fmt
= GET_RTX_FORMAT (code
);
2532 for (i
= GET_RTX_LENGTH (code
) - 1; i
>= 0; i
--)
2535 reg_scan_mark_refs (XEXP (x
, i
), insn
, note_flag
, min_regno
);
2536 else if (fmt
[i
] == 'E' && XVEC (x
, i
) != 0)
2539 for (j
= XVECLEN (x
, i
) - 1; j
>= 0; j
--)
2540 reg_scan_mark_refs (XVECEXP (x
, i
, j
), insn
, note_flag
, min_regno
);
2547 /* Return nonzero if C1 is a subset of C2, i.e., if every register in C1
2551 reg_class_subset_p (enum reg_class c1
, enum reg_class c2
)
2553 if (c1
== c2
) return 1;
2558 GO_IF_HARD_REG_SUBSET (reg_class_contents
[(int) c1
],
2559 reg_class_contents
[(int) c2
],
2564 /* Return nonzero if there is a register that is in both C1 and C2. */
2567 reg_classes_intersect_p (enum reg_class c1
, enum reg_class c2
)
2571 if (c1
== c2
) return 1;
2573 if (c1
== ALL_REGS
|| c2
== ALL_REGS
)
2576 COPY_HARD_REG_SET (c
, reg_class_contents
[(int) c1
]);
2577 AND_HARD_REG_SET (c
, reg_class_contents
[(int) c2
]);
2579 GO_IF_HARD_REG_SUBSET (c
, reg_class_contents
[(int) NO_REGS
], lose
);
2586 /* Release any memory allocated by register sets. */
2589 regset_release_memory (void)
2591 bitmap_release_memory ();
2594 #ifdef CANNOT_CHANGE_MODE_CLASS
2596 struct subregs_of_mode_node
2599 unsigned char modes
[MAX_MACHINE_MODE
];
2602 static htab_t subregs_of_mode
;
2605 som_hash (const void *x
)
2607 const struct subregs_of_mode_node
*a
= x
;
2612 som_eq (const void *x
, const void *y
)
2614 const struct subregs_of_mode_node
*a
= x
;
2615 const struct subregs_of_mode_node
*b
= y
;
2616 return a
->block
== b
->block
;
2620 init_subregs_of_mode (void)
2622 if (subregs_of_mode
)
2623 htab_empty (subregs_of_mode
);
2625 subregs_of_mode
= htab_create (100, som_hash
, som_eq
, free
);
2629 record_subregs_of_mode (rtx subreg
)
2631 struct subregs_of_mode_node dummy
, *node
;
2632 enum machine_mode mode
;
2636 if (!REG_P (SUBREG_REG (subreg
)))
2639 regno
= REGNO (SUBREG_REG (subreg
));
2640 mode
= GET_MODE (subreg
);
2642 if (regno
< FIRST_PSEUDO_REGISTER
)
2645 dummy
.block
= regno
& -8;
2646 slot
= htab_find_slot_with_hash (subregs_of_mode
, &dummy
,
2647 dummy
.block
, INSERT
);
2651 node
= xcalloc (1, sizeof (*node
));
2652 node
->block
= regno
& -8;
2656 node
->modes
[mode
] |= 1 << (regno
& 7);
2659 /* Set bits in *USED which correspond to registers which can't change
2660 their mode from FROM to any mode in which REGNO was encountered. */
2663 cannot_change_mode_set_regs (HARD_REG_SET
*used
, enum machine_mode from
,
2666 struct subregs_of_mode_node dummy
, *node
;
2667 enum machine_mode to
;
2671 dummy
.block
= regno
& -8;
2672 node
= htab_find_with_hash (subregs_of_mode
, &dummy
, dummy
.block
);
2676 mask
= 1 << (regno
& 7);
2677 for (to
= VOIDmode
; to
< NUM_MACHINE_MODES
; to
++)
2678 if (node
->modes
[to
] & mask
)
2679 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
2680 if (!TEST_HARD_REG_BIT (*used
, i
)
2681 && REG_CANNOT_CHANGE_MODE_P (i
, from
, to
))
2682 SET_HARD_REG_BIT (*used
, i
);
2685 /* Return 1 if REGNO has had an invalid mode change in CLASS from FROM
2689 invalid_mode_change_p (unsigned int regno
, enum reg_class
class,
2690 enum machine_mode from
)
2692 struct subregs_of_mode_node dummy
, *node
;
2693 enum machine_mode to
;
2696 dummy
.block
= regno
& -8;
2697 node
= htab_find_with_hash (subregs_of_mode
, &dummy
, dummy
.block
);
2701 mask
= 1 << (regno
& 7);
2702 for (to
= VOIDmode
; to
< NUM_MACHINE_MODES
; to
++)
2703 if (node
->modes
[to
] & mask
)
2704 if (CANNOT_CHANGE_MODE_CLASS (from
, to
, class))
2709 #endif /* CANNOT_CHANGE_MODE_CLASS */
2711 #include "gt-regclass.h"