gcc/

[official-gcc.git] / gcc / config / pa / pa64-regs.h

/* Configuration for GCC-compiler for PA-RISC.
   Copyright (C) 1999, 2000, 2003, 2004, 2007, 2008, 2010
   Free Software Foundation, Inc.

This file is part of GCC.

GCC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3, or (at your option)
any later version.

GCC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING3.  If not see
<http://www.gnu.org/licenses/>.  */

/* Standard register usage.

   It is safe to refer to actual register numbers in this file.  */

/* Number of actual hardware registers.
   The hardware registers are assigned numbers for the compiler
   from 0 to just below FIRST_PSEUDO_REGISTER.
   All registers that the compiler knows about must be given numbers,
   even those that are not normally considered general registers.

   HP-PA 2.0w has 32 fullword registers and 32 floating point
   registers. However, the floating point registers behave
   differently: the left and right halves of registers are addressable
   as 32-bit registers.

   Due to limitations within GCC itself, we do not expose the left/right
   half addressability when in wide mode.  This is not a major performance
   issue as using the halves independently triggers false dependency stalls
   anyway.  */

#define FIRST_PSEUDO_REGISTER 62  /* 32 general regs + 28 fp regs +
                                     + 1 shift reg + frame pointer */

/* 1 for registers that have pervasive standard uses
   and are not available for the register allocator.

   On the HP-PA, these are:
   Reg 0        = 0 (hardware). However, 0 is used for condition code,
                  so is not fixed.
   Reg 1        = ADDIL target/Temporary (hardware).
   Reg 2        = Return Pointer
   Reg 3        = Frame Pointer
   Reg 4        = Frame Pointer (>8k varying frame with HP compilers only)
   Reg 4-18     = Preserved Registers
   Reg 19       = Linkage Table Register in HPUX 8.0 shared library scheme.
   Reg 20-22    = Temporary Registers
   Reg 23-26    = Temporary/Parameter Registers
   Reg 27       = Global Data Pointer (hp)
   Reg 28       = Temporary/Return Value register
   Reg 29       = Temporary/Static Chain/Return Value register #2
   Reg 30       = stack pointer
   Reg 31       = Temporary/Millicode Return Pointer (hp)

   Freg 0-3     = Status Registers      -- Not known to the compiler.
   Freg 4-7     = Arguments/Return Value
   Freg 8-11    = Temporary Registers
   Freg 12-21   = Preserved Registers
   Freg 22-31 = Temporary Registers

*/

#define FIXED_REGISTERS  \
 {0, 0, 0, 0, 0, 0, 0, 0, \
  0, 0, 0, 0, 0, 0, 0, 0, \
  0, 0, 0, 0, 0, 0, 0, 0, \
  0, 0, 0, 1, 0, 0, 1, 0, \
  /* fp registers */      \
  0, 0, 0, 0, 0, 0, 0, 0, \
  0, 0, 0, 0, 0, 0, 0, 0, \
  0, 0, 0, 0, 0, 0, 0, 0, \
  0, 0, 0, 0,             \
  /* shift register and soft frame pointer */     \
  0, 1}

/* 1 for registers not available across function calls.
   These must include the FIXED_REGISTERS and also any
   registers that can be used without being saved.
   The latter must include the registers where values are returned
   and the register where structure-value addresses are passed.
   Aside from that, you can include as many other registers as you like.  */
#define CALL_USED_REGISTERS  \
 {1, 1, 1, 0, 0, 0, 0, 0, \
  0, 0, 0, 0, 0, 0, 0, 0, \
  0, 0, 0, 1, 1, 1, 1, 1, \
  1, 1, 1, 1, 1, 1, 1, 1, \
  /* fp registers */      \
  1, 1, 1, 1, 1, 1, 1, 1, \
  0, 0, 0, 0, 0, 0, 0, 0, \
  0, 0, 1, 1, 1, 1, 1, 1, \
  1, 1, 1, 1,             \
  /* shift register and soft frame pointer */    \
  1, 1}

/* Allocate the call used registers first.  This should minimize
   the number of registers that need to be saved (as call used
   registers will generally not be allocated across a call).

   Experimentation has shown slightly better results by allocating
   FP registers first.  We allocate the caller-saved registers more
   or less in reverse order to their allocation as arguments.  */

#define REG_ALLOC_ORDER \
 {                                      \
  /* caller-saved fp regs.  */          \
  50, 51, 52, 53, 54, 55, 56, 57,       \
  58, 59, 39, 38, 37, 36, 35, 34,       \
  33, 32,                               \
  /* caller-saved general regs.  */     \
  28, 31, 19, 20, 21, 22, 23, 24,       \
  25, 26, 29,  2,                       \
  /* callee-saved fp regs.  */          \
  40, 41, 42, 43, 44, 45, 46, 47,       \
  48, 49,                               \
  /* callee-saved general regs.  */     \
   3,  4,  5,  6,  7,  8,  9, 10,       \
  11, 12, 13, 14, 15, 16, 17, 18,       \
  /* special registers.  */             \
   1, 27, 30,  0, 60, 61}


/* Return number of consecutive hard regs needed starting at reg REGNO
   to hold something of mode MODE.
   This is ordinarily the length in words of a value of mode MODE
   but can be less for certain modes in special long registers.

   For PA64, GPRs and FPRs hold 64 bits worth.  We ignore the 32-bit
   addressability of the FPRs and pretend each register holds precisely
   WORD_SIZE bits.  Note that SCmode values are placed in a single FPR.
   Thus, any patterns defined to operate on these values would have to
   use the 32-bit addressability of the FPR registers.  */
#define HARD_REGNO_NREGS(REGNO, MODE)                                   \
  ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)

/* These are the valid FP modes.  */
#define VALID_FP_MODE_P(MODE)                                           \
  ((MODE) == SFmode || (MODE) == DFmode                                 \
   || (MODE) == SCmode || (MODE) == DCmode                              \
   || (MODE) == SImode || (MODE) == DImode)

/* Value is 1 if hard register REGNO can hold a value of machine-mode MODE.
   On the HP-PA, the cpu registers can hold any mode.  We
   force this to be an even register if it cannot hold the full mode.  */
#define HARD_REGNO_MODE_OK(REGNO, MODE) \
  ((REGNO) == 0                                                         \
   ? (MODE) == CCmode || (MODE) == CCFPmode                             \
   : (REGNO) == 60 ? SCALAR_INT_MODE_P (MODE)                           \
   /* Make wide modes be in aligned registers.  */                      \
   : FP_REGNO_P (REGNO)                                                 \
     ? (VALID_FP_MODE_P (MODE)                                          \
        && (GET_MODE_SIZE (MODE) <= 8                                   \
            || (GET_MODE_SIZE (MODE) == 16 && ((REGNO) & 1) == 0)       \
            || (GET_MODE_SIZE (MODE) == 32 && ((REGNO) & 3) == 0)))     \
   : (GET_MODE_SIZE (MODE) <= UNITS_PER_WORD                            \
      || (GET_MODE_SIZE (MODE) == 2 * UNITS_PER_WORD                    \
          && ((((REGNO) & 1) == 1 && (REGNO) <= 25) || (REGNO) == 28))  \
      || (GET_MODE_SIZE (MODE) == 4 * UNITS_PER_WORD                    \
          && ((REGNO) & 3) == 3 && (REGNO) <= 23)))

/* How to renumber registers for dbx and gdb.

   Registers 0  - 31 remain unchanged.

   Registers 32 - 59 are mapped to 72, 74, 76 ...

   Register 60 is mapped to 32.  */
#define DBX_REGISTER_NUMBER(REGNO) \
  ((REGNO) <= 31 ? (REGNO) : ((REGNO) < 60 ? (REGNO - 32) * 2 + 72 : 32))

/* We must not use the DBX register numbers for the DWARF 2 CFA column
   numbers because that maps to numbers beyond FIRST_PSEUDO_REGISTER.
   Instead use the identity mapping.  */
#define DWARF_FRAME_REGNUM(REG) REG

/* Define the classes of registers for register constraints in the
   machine description.  Also define ranges of constants.

   One of the classes must always be named ALL_REGS and include all hard regs.
   If there is more than one class, another class must be named NO_REGS
   and contain no registers.

   The name GENERAL_REGS must be the name of a class (or an alias for
   another name such as ALL_REGS).  This is the class of registers
   that is allowed by "g" or "r" in a register constraint.
   Also, registers outside this class are allocated only when
   instructions express preferences for them.

   The classes must be numbered in nondecreasing order; that is,
   a larger-numbered class must never be contained completely
   in a smaller-numbered class.

   For any two classes, it is very desirable that there be another
   class that represents their union.  */

  /* The HP-PA has four kinds of registers: general regs, 1.0 fp regs,
     1.1 fp regs, and the high 1.1 fp regs, to which the operands of
     fmpyadd and fmpysub are restricted.  */

enum reg_class { NO_REGS, R1_REGS, GENERAL_REGS, FPUPPER_REGS, FP_REGS,
                 GENERAL_OR_FP_REGS, SHIFT_REGS, ALL_REGS, LIM_REG_CLASSES};

#define N_REG_CLASSES (int) LIM_REG_CLASSES

/* Give names of register classes as strings for dump file.  */

#define REG_CLASS_NAMES \
  {"NO_REGS", "R1_REGS", "GENERAL_REGS", "FPUPPER_REGS", "FP_REGS", \
   "GENERAL_OR_FP_REGS", "SHIFT_REGS", "ALL_REGS"}

/* Define which registers fit in which classes.
   This is an initializer for a vector of HARD_REG_SET
   of length N_REG_CLASSES. Register 0, the "condition code" register,
   is in no class.  */

#define REG_CLASS_CONTENTS      \
 {{0x00000000, 0x00000000},     /* NO_REGS */                   \
  {0x00000002, 0x00000000},     /* R1_REGS */                   \
  {0xfffffffe, 0x20000000},     /* GENERAL_REGS */              \
  {0x00000000, 0x00000000},     /* FPUPPER_REGS */              \
  {0x00000000, 0x0fffffff},     /* FP_REGS */                   \
  {0xfffffffe, 0x2fffffff},     /* GENERAL_OR_FP_REGS */        \
  {0x00000000, 0x10000000},     /* SHIFT_REGS */                \
  {0xfffffffe, 0x3fffffff}}     /* ALL_REGS */

/* Defines invalid mode changes.  */

#define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
  pa_cannot_change_mode_class (FROM, TO, CLASS)

/* Return the class number of the smallest class containing
   reg number REGNO.  This could be a conditional expression
   or could index an array.  */

#define REGNO_REG_CLASS(REGNO)                                          \
  ((REGNO) == 0 ? NO_REGS                                               \
   : (REGNO) == 1 ? R1_REGS                                             \
   : (REGNO) < 32 || (REGNO) == 61 ? GENERAL_REGS                       \
   : (REGNO) < 60 ? FP_REGS                                             \
   : SHIFT_REGS)

/* Return the maximum number of consecutive registers
   needed to represent mode MODE in a register of class CLASS.  */
#define CLASS_MAX_NREGS(CLASS, MODE)                                    \
  ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)

/* 1 if N is a possible register number for function argument passing.  */

#define FUNCTION_ARG_REGNO_P(N) \
  ((((N) >= 19) && (N) <= 26) \
   || (! TARGET_SOFT_FLOAT && (N) >= 32 && (N) <= 39))

/* How to refer to registers in assembler output.
   This sequence is indexed by compiler's hard-register-number (see above).  */

#define REGISTER_NAMES \
{"%r0",   "%r1",    "%r2",   "%r3",    "%r4",   "%r5",    "%r6",   "%r7",    \
 "%r8",   "%r9",    "%r10",  "%r11",   "%r12",  "%r13",   "%r14",  "%r15",   \
 "%r16",  "%r17",   "%r18",  "%r19",   "%r20",  "%r21",   "%r22",  "%r23",   \
 "%r24",  "%r25",   "%r26",  "%r27",   "%r28",  "%r29",   "%r30",  "%r31",   \
 "%fr4",  "%fr5",   "%fr6",  "%fr7",   "%fr8",  "%fr9",   "%fr10", "%fr11",  \
 "%fr12", "%fr13",  "%fr14", "%fr15",  "%fr16", "%fr17",  "%fr18", "%fr19",  \
 "%fr20", "%fr21",  "%fr22", "%fr23",  "%fr24", "%fr25",  "%fr26", "%fr27",  \
 "%fr28", "%fr29",  "%fr30", "%fr31",  "SAR",   "sfp"}

#define ADDITIONAL_REGISTER_NAMES \
 {{"%cr11",60}}

#define FP_SAVED_REG_LAST 49
#define FP_SAVED_REG_FIRST 40
#define FP_REG_STEP 1
#define FP_REG_FIRST 32
#define FP_REG_LAST 59