2 # Process this file with autoconf to generate a configuration script.
4 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
5 # 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
7 #This file is part of GCC.
9 #GCC is free software; you can redistribute it and/or modify it under
10 #the terms of the GNU General Public License as published by the Free
11 #Software Foundation; either version 3, or (at your option) any later
14 #GCC is distributed in the hope that it will be useful, but WITHOUT
15 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
16 #FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
19 #You should have received a copy of the GNU General Public License
20 #along with GCC; see the file COPYING3. If not see
21 #<http://www.gnu.org/licenses/>.
23 # --------------------------------
24 # Initialization and sanity checks
25 # --------------------------------
29 AC_CONFIG_SRCDIR(tree.c)
30 AC_CONFIG_HEADER(auto-host.h:config.in)
32 gcc_version=`cat $srcdir/BASE-VER`
34 # Determine the host, build, and target systems
39 # Determine the noncanonical target name, for directory use.
40 ACX_NONCANONICAL_TARGET
42 # Determine the target- and build-specific subdirectories
45 # Set program_transform_name
48 # Check for bogus environment variables.
49 # Test if LIBRARY_PATH contains the notation for the current directory
50 # since this would lead to problems installing/building glibc.
51 # LIBRARY_PATH contains the current directory if one of the following
53 # - one of the terminals (":" and ";") is the first or last sign
54 # - two terminals occur directly after each other
55 # - the path contains an element with a dot in it
56 AC_MSG_CHECKING(LIBRARY_PATH variable)
58 case ${LIBRARY_PATH} in
59 [:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
60 library_path_setting="contains current directory"
63 library_path_setting="ok"
67 AC_MSG_RESULT($library_path_setting)
68 if test "$library_path_setting" != "ok"; then
70 *** LIBRARY_PATH shouldn't contain the current directory when
71 *** building gcc. Please change the environment variable
72 *** and run configure again.])
75 # Test if GCC_EXEC_PREFIX contains the notation for the current directory
76 # since this would lead to problems installing/building glibc.
77 # GCC_EXEC_PREFIX contains the current directory if one of the following
79 # - one of the terminals (":" and ";") is the first or last sign
80 # - two terminals occur directly after each other
81 # - the path contains an element with a dot in it
82 AC_MSG_CHECKING(GCC_EXEC_PREFIX variable)
84 case ${GCC_EXEC_PREFIX} in
85 [:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
86 gcc_exec_prefix_setting="contains current directory"
89 gcc_exec_prefix_setting="ok"
93 AC_MSG_RESULT($gcc_exec_prefix_setting)
94 if test "$gcc_exec_prefix_setting" != "ok"; then
96 *** GCC_EXEC_PREFIX shouldn't contain the current directory when
97 *** building gcc. Please change the environment variable
98 *** and run configure again.])
105 # Specify the local prefix
107 AC_ARG_WITH(local-prefix,
108 [ --with-local-prefix=DIR specifies directory to put local include],
109 [case "${withval}" in
110 yes) AC_MSG_ERROR(bad value ${withval} given for local include directory prefix) ;;
112 *) local_prefix=$with_local_prefix ;;
115 # Default local prefix if it is empty
116 if test x$local_prefix = x; then
117 local_prefix=/usr/local
120 # Don't set gcc_gxx_include_dir to gxx_include_dir since that's only
121 # passed in by the toplevel make and thus we'd get different behavior
122 # depending on where we built the sources.
124 # Specify the g++ header file directory
125 AC_ARG_WITH(gxx-include-dir,
126 [ --with-gxx-include-dir=DIR
127 specifies directory to put g++ header files],
128 [case "${withval}" in
129 yes) AC_MSG_ERROR(bad value ${withval} given for g++ include directory) ;;
131 *) gcc_gxx_include_dir=$with_gxx_include_dir ;;
134 # This logic must match libstdc++-v3/acinclude.m4:GLIBCXX_EXPORT_INSTALL_INFO.
135 if test x${gcc_gxx_include_dir} = x; then
136 if test x${enable_version_specific_runtime_libs} = xyes; then
137 gcc_gxx_include_dir='${libsubdir}/include/c++'
139 libstdcxx_incdir='include/c++/$(version)'
140 if test x$host != x$target; then
141 libstdcxx_incdir="$target_alias/$libstdcxx_incdir"
143 gcc_gxx_include_dir="\$(libsubdir)/\$(libsubdir_to_prefix)$libstdcxx_incdir"
147 AC_ARG_WITH(cpp_install_dir,
148 [ --with-cpp-install-dir=DIR
149 install the user visible C preprocessor in DIR
150 (relative to PREFIX) as well as PREFIX/bin],
151 [if test x$withval = xyes; then
152 AC_MSG_ERROR([option --with-cpp-install-dir requires an argument])
153 elif test x$withval != xno; then
154 cpp_install_dir=$withval
157 # We would like to our source tree to be readonly. However when releases or
158 # pre-releases are generated, the flex/bison generated files as well as the
159 # various formats of manuals need to be included along with the rest of the
160 # sources. Therefore we have --enable-generated-files-in-srcdir to do
163 AC_MSG_CHECKING([whether to place generated files in the source directory])
164 dnl generated-files-in-srcdir is disabled by default
165 AC_ARG_ENABLE(generated-files-in-srcdir,
166 [ --enable-generated-files-in-srcdir
167 put copies of generated files in source dir
168 intended for creating source tarballs for users
169 without texinfo bison or flex.],
170 generated_files_in_srcdir=$enableval,
171 generated_files_in_srcdir=no)
173 AC_MSG_RESULT($generated_files_in_srcdir)
175 if test "$generated_files_in_srcdir" = "yes"; then
182 # -------------------
183 # Find default linker
184 # -------------------
188 [ --with-gnu-ld arrange to work with GNU ld.],
189 gnu_ld_flag="$with_gnu_ld",
192 # With pre-defined ld
194 [ --with-ld arrange to use the specified ld (full pathname)],
195 DEFAULT_LINKER="$with_ld")
196 if test x"${DEFAULT_LINKER+set}" = x"set"; then
197 if test ! -x "$DEFAULT_LINKER"; then
198 AC_MSG_ERROR([cannot execute: $DEFAULT_LINKER: check --with-ld or env. var. DEFAULT_LINKER])
199 elif $DEFAULT_LINKER -v < /dev/null 2>&1 | grep GNU > /dev/null; then
202 AC_DEFINE_UNQUOTED(DEFAULT_LINKER,"$DEFAULT_LINKER",
203 [Define to enable the use of a default linker.])
206 gnu_ld=`if test x"$gnu_ld_flag" = x"yes"; then echo 1; else echo 0; fi`
207 AC_DEFINE_UNQUOTED(HAVE_GNU_LD, $gnu_ld, [Define if using GNU ld.])
209 AC_MSG_CHECKING([whether a default linker was specified])
210 if test x"${DEFAULT_LINKER+set}" = x"set"; then
211 if test x"$gnu_ld_flag" = x"no"; then
212 AC_MSG_RESULT([yes ($DEFAULT_LINKER)])
214 AC_MSG_RESULT([yes ($DEFAULT_LINKER - GNU ld)])
220 # With demangler in GNU ld
221 AC_ARG_WITH(demangler-in-ld,
222 [ --with-demangler-in-ld try to use demangler in GNU ld.],
223 demangler_in_ld="$with_demangler_in_ld",
226 # ----------------------
227 # Find default assembler
228 # ----------------------
232 [ --with-gnu-as arrange to work with GNU as],
233 gas_flag="$with_gnu_as",
237 [ --with-as arrange to use the specified as (full pathname)],
238 DEFAULT_ASSEMBLER="$with_as")
239 if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
240 if test ! -x "$DEFAULT_ASSEMBLER"; then
241 AC_MSG_ERROR([cannot execute: $DEFAULT_ASSEMBLER: check --with-as or env. var. DEFAULT_ASSEMBLER])
242 elif $DEFAULT_ASSEMBLER -v < /dev/null 2>&1 | grep GNU > /dev/null; then
245 AC_DEFINE_UNQUOTED(DEFAULT_ASSEMBLER,"$DEFAULT_ASSEMBLER",
246 [Define to enable the use of a default assembler.])
249 gnu_as=`if test x"$gas_flag" = x"yes"; then echo 1; else echo 0; fi`
250 AC_DEFINE_UNQUOTED(HAVE_GNU_AS, $gnu_as, [Define if using GNU as.])
252 AC_MSG_CHECKING([whether a default assembler was specified])
253 if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
254 if test x"$gas_flag" = x"no"; then
255 AC_MSG_RESULT([yes ($DEFAULT_ASSEMBLER)])
257 AC_MSG_RESULT([yes ($DEFAULT_ASSEMBLER - GNU as)])
267 # If a non-executable a.out is present (e.g. created by GNU as above even if
268 # invoked with -v only), the IRIX 6 native ld just overwrites the existing
269 # file, even when creating an executable, so an execution test fails.
270 # Remove possible default executable files to avoid this.
272 # FIXME: This really belongs into AC_PROG_CC and can be removed once
273 # Autoconf includes it.
274 rm -f a.out a.exe b.out
276 # Find the native compiler
280 ACX_PROG_GNAT([-I"$srcdir"/ada])
282 # autoconf is lame and doesn't give us any substitution variable for this.
283 if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = no"; then
284 NO_MINUS_C_MINUS_O=yes
286 OUTPUT_OPTION='-o $@'
288 AC_SUBST(NO_MINUS_C_MINUS_O)
289 AC_SUBST(OUTPUT_OPTION)
291 # Remove the -O2: for historical reasons, unless bootstrapping we prefer
292 # optimizations to be activated explicitly by the toplevel.
295 *) CFLAGS=`echo $CFLAGS | sed "s/-O[[s0-9]]* *//" ` ;;
299 # -------------------------
300 # Check C compiler features
301 # -------------------------
303 AC_USE_SYSTEM_EXTENSIONS
309 # sizeof(char) is 1 by definition.
310 AC_CHECK_SIZEOF(void *)
311 AC_CHECK_SIZEOF(short)
313 AC_CHECK_SIZEOF(long)
314 AC_CHECK_TYPES([long long], [AC_CHECK_SIZEOF(long long)])
315 AC_CHECK_TYPES([__int64], [AC_CHECK_SIZEOF(__int64)])
318 # ---------------------
319 # Warnings and checking
320 # ---------------------
322 # Check $CC warning features (if it's GCC).
323 # We want to use -pedantic, but we don't want warnings about
327 # So, we only use -pedantic if we can disable those warnings.
329 ACX_PROG_CC_WARNING_OPTS(
330 m4_quote(m4_do([-W -Wall -Wwrite-strings -Wcast-qual])), [loose_warn])
331 ACX_PROG_CC_WARNING_OPTS(
332 m4_quote(m4_do([-Wstrict-prototypes -Wmissing-prototypes])),
334 ACX_PROG_CC_WARNING_OPTS(
335 m4_quote(m4_do([-Wmissing-format-attribute])), [strict_warn])
336 ACX_PROG_CC_WARNING_OPTS(
337 m4_quote(m4_do([-Wold-style-definition -Wc++-compat])), [c_strict_warn])
338 ACX_PROG_CC_WARNING_ALMOST_PEDANTIC(
339 m4_quote(m4_do([-Wno-long-long -Wno-variadic-macros ],
340 [-Wno-overlength-strings])), [strict_warn])
341 ACX_PROG_CC_WARNINGS_ARE_ERRORS([manual], [strict_warn])
343 # The above macros do nothing if the compiler is not GCC. However, the
344 # Makefile has more goo to add other flags, so these variables are used
345 # to enable warnings only for GCC.
348 if test "x$GCC" = "xyes"; then
349 warn_cflags='$(GCC_WARN_CFLAGS)'
350 warn_cxxflags='$(GCC_WARN_CXXFLAGS)'
352 AC_SUBST(warn_cflags)
353 AC_SUBST(warn_cxxflags)
355 # Enable expensive internal checks
357 if test x"`cat $srcdir/DEV-PHASE`" != xexperimental; then
361 AC_ARG_ENABLE(checking,
362 [ --enable-checking[=LIST]
363 enable expensive run-time checks. With LIST,
364 enable only specific categories of checks.
365 Categories are: yes,no,all,none,release.
366 Flags are: assert,df,fold,gc,gcac,gimple,misc,
367 rtlflag,rtl,runtime,tree,valgrind,types.],
368 [ac_checking_flags="${enableval}"],[
369 # Determine the default checks.
370 if test x$is_release = x ; then
371 ac_checking_flags=yes
373 ac_checking_flags=release
375 IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="$IFS,"
376 for check in release $ac_checking_flags
379 # these set all the flags to specific states
380 yes) ac_assert_checking=1 ; ac_checking=1 ; ac_df_checking= ;
381 ac_fold_checking= ; ac_gc_checking=1 ;
382 ac_gc_always_collect= ; ac_gimple_checking=1 ; ac_rtl_checking= ;
383 ac_rtlflag_checking=1 ; ac_runtime_checking=1 ;
384 ac_tree_checking=1 ; ac_valgrind_checking= ;
385 ac_types_checking=1 ;;
386 no|none) ac_assert_checking= ; ac_checking= ; ac_df_checking= ;
387 ac_fold_checking= ; ac_gc_checking= ;
388 ac_gc_always_collect= ; ac_gimple_checking= ; ac_rtl_checking= ;
389 ac_rtlflag_checking= ; ac_runtime_checking= ;
390 ac_tree_checking= ; ac_valgrind_checking= ;
391 ac_types_checking= ;;
392 all) ac_assert_checking=1 ; ac_checking=1 ; ac_df_checking=1 ;
393 ac_fold_checking=1 ; ac_gc_checking=1 ;
394 ac_gc_always_collect=1 ; ac_gimple_checking=1 ; ac_rtl_checking=1 ;
395 ac_rtlflag_checking=1 ; ac_runtime_checking=1 ;
396 ac_tree_checking=1 ; ac_valgrind_checking= ;
397 ac_types_checking=1 ;;
398 release) ac_assert_checking=1 ; ac_checking= ; ac_df_checking= ;
399 ac_fold_checking= ; ac_gc_checking= ;
400 ac_gc_always_collect= ; ac_gimple_checking= ; ac_rtl_checking= ;
401 ac_rtlflag_checking= ; ac_runtime_checking=1 ;
402 ac_tree_checking= ; ac_valgrind_checking= ;
403 ac_types_checking= ;;
404 # these enable particular checks
405 assert) ac_assert_checking=1 ;;
406 df) ac_df_checking=1 ;;
407 fold) ac_fold_checking=1 ;;
408 gc) ac_gc_checking=1 ;;
409 gcac) ac_gc_always_collect=1 ;;
410 gimple) ac_gimple_checking=1 ;;
411 misc) ac_checking=1 ;;
412 rtl) ac_rtl_checking=1 ;;
413 rtlflag) ac_rtlflag_checking=1 ;;
414 runtime) ac_runtime_checking=1 ;;
415 tree) ac_tree_checking=1 ;;
416 types) ac_types_checking=1 ;;
417 valgrind) ac_valgrind_checking=1 ;;
418 *) AC_MSG_ERROR(unknown check category $check) ;;
424 if test x$ac_checking != x ; then
425 AC_DEFINE(ENABLE_CHECKING, 1,
426 [Define if you want more run-time sanity checks. This one gets a grab
427 bag of miscellaneous but relatively cheap checks.])
428 nocommon_flag=-fno-common
430 AC_SUBST(nocommon_flag)
431 if test x$ac_df_checking != x ; then
432 AC_DEFINE(ENABLE_DF_CHECKING, 1,
433 [Define if you want more run-time sanity checks for dataflow.])
435 if test x$ac_assert_checking != x ; then
436 AC_DEFINE(ENABLE_ASSERT_CHECKING, 1,
437 [Define if you want assertions enabled. This is a cheap check.])
439 if test x$ac_gimple_checking != x ; then
440 AC_DEFINE(ENABLE_GIMPLE_CHECKING, 1,
441 [Define if you want operations on GIMPLE (the basic data structure of
442 the high-level optimizers) to be checked for dynamic type safety at
443 runtime. This is moderately expensive.])
445 GCC_TARGET_TEMPLATE(ENABLE_RUNTIME_CHECKING)
446 if test x$ac_runtime_checking != x ; then
447 AC_DEFINE(ENABLE_RUNTIME_CHECKING, 1,
448 [Define if you want runtime assertions enabled. This is a cheap check.])
450 if test x$ac_tree_checking != x ; then
451 AC_DEFINE(ENABLE_TREE_CHECKING, 1,
452 [Define if you want all operations on trees (the basic data
453 structure of the front ends) to be checked for dynamic type safety
454 at runtime. This is moderately expensive. The tree browser debugging
455 routines will also be enabled by this option.
457 TREEBROWSER=tree-browser.o
459 if test x$ac_types_checking != x ; then
460 AC_DEFINE(ENABLE_TYPES_CHECKING, 1,
461 [Define if you want all gimple types to be verified after gimplifiation.
465 AC_SUBST(TREEBROWSER)
466 if test x$ac_rtl_checking != x ; then
467 AC_DEFINE(ENABLE_RTL_CHECKING, 1,
468 [Define if you want all operations on RTL (the basic data structure
469 of the optimizer and back end) to be checked for dynamic type safety
470 at runtime. This is quite expensive.])
472 if test x$ac_rtlflag_checking != x ; then
473 AC_DEFINE(ENABLE_RTL_FLAG_CHECKING, 1,
474 [Define if you want RTL flag accesses to be checked against the RTL
475 codes that are supported for each access macro. This is relatively
478 if test x$ac_gc_checking != x ; then
479 AC_DEFINE(ENABLE_GC_CHECKING, 1,
480 [Define if you want the garbage collector to do object poisoning and
481 other memory allocation checks. This is quite expensive.])
483 if test x$ac_gc_always_collect != x ; then
484 AC_DEFINE(ENABLE_GC_ALWAYS_COLLECT, 1,
485 [Define if you want the garbage collector to operate in maximally
486 paranoid mode, validating the entire heap and collecting garbage at
487 every opportunity. This is extremely expensive.])
489 if test x$ac_fold_checking != x ; then
490 AC_DEFINE(ENABLE_FOLD_CHECKING, 1,
491 [Define if you want fold checked that it never destructs its argument.
492 This is quite expensive.])
494 valgrind_path_defines=
497 dnl # This check AC_REQUIREs various stuff, so it *must not* be inside
498 dnl # an if statement. This was the source of very frustrating bugs
499 dnl # in converting to autoconf 2.5x!
500 AC_CHECK_HEADER(valgrind.h, have_valgrind_h=yes, have_valgrind_h=no)
502 if test x$ac_valgrind_checking != x ; then
503 # It is certainly possible that there's valgrind but no valgrind.h.
504 # GCC relies on making annotations so we must have both.
505 AC_MSG_CHECKING(for VALGRIND_DISCARD in <valgrind/memcheck.h>)
506 AC_PREPROC_IFELSE([AC_LANG_SOURCE(
507 [[#include <valgrind/memcheck.h>
508 #ifndef VALGRIND_DISCARD
509 #error VALGRIND_DISCARD not defined
511 [gcc_cv_header_valgrind_memcheck_h=yes],
512 [gcc_cv_header_valgrind_memcheck_h=no])
513 AC_MSG_RESULT($gcc_cv_header_valgrind_memcheck_h)
514 AC_MSG_CHECKING(for VALGRIND_DISCARD in <memcheck.h>)
515 AC_PREPROC_IFELSE([AC_LANG_SOURCE(
516 [[#include <memcheck.h>
517 #ifndef VALGRIND_DISCARD
518 #error VALGRIND_DISCARD not defined
520 [gcc_cv_header_memcheck_h=yes],
521 [gcc_cv_header_memcheck_h=no])
522 AC_MSG_RESULT($gcc_cv_header_memcheck_h)
523 AM_PATH_PROG_WITH_TEST(valgrind_path, valgrind,
524 [$ac_dir/$ac_word --version | grep valgrind- >/dev/null 2>&1])
525 if test "x$valgrind_path" = "x" \
526 || (test $have_valgrind_h = no \
527 && test $gcc_cv_header_memcheck_h = no \
528 && test $gcc_cv_header_valgrind_memcheck_h = no); then
529 AC_MSG_ERROR([*** Can't find both valgrind and valgrind/memcheck.h, memcheck.h or valgrind.h])
531 valgrind_path_defines=-DVALGRIND_PATH='\"'$valgrind_path'\"'
532 valgrind_command="$valgrind_path -q"
533 AC_DEFINE(ENABLE_VALGRIND_CHECKING, 1,
534 [Define if you want to run subprograms and generated programs
535 through valgrind (a memory checker). This is extremely expensive.])
536 if test $gcc_cv_header_valgrind_memcheck_h = yes; then
537 AC_DEFINE(HAVE_VALGRIND_MEMCHECK_H, 1,
538 [Define if valgrind's valgrind/memcheck.h header is installed.])
540 if test $gcc_cv_header_memcheck_h = yes; then
541 AC_DEFINE(HAVE_MEMCHECK_H, 1,
542 [Define if valgrind's memcheck.h header is installed.])
545 AC_SUBST(valgrind_path_defines)
546 AC_SUBST(valgrind_command)
548 # Enable code coverage collection
549 AC_ARG_ENABLE(coverage,
550 [ --enable-coverage[=LEVEL]
551 enable compiler's code coverage collection.
552 Use to measure compiler performance and locate
553 unused parts of the compiler. With LEVEL, specify
554 optimization. Values are opt, noopt,
556 [case "${enableval}" in
558 coverage_flags="-fprofile-arcs -ftest-coverage -frandom-seed=\$@ -O0"
561 coverage_flags="-fprofile-arcs -ftest-coverage -frandom-seed=\$@ -O2"
564 # a.k.a. --disable-coverage
568 AC_MSG_ERROR(unknown coverage setting $enableval)
572 AC_SUBST(coverage_flags)
574 AC_ARG_ENABLE(gather-detailed-mem-stats,
575 [ --enable-gather-detailed-mem-stats enable detailed memory allocation stats gathering], [],
576 [enable_gather_detailed_mem_stats=no])
577 if test x$enable_gather_detailed_mem_stats = xyes ; then
578 AC_DEFINE(GATHER_STATISTICS, 1,
579 [Define to enable detailed memory allocation stats gathering.])
582 # -------------------------------
583 # Miscenalleous configure options
584 # -------------------------------
586 # See if we are building gcc with C++.
587 AC_ARG_ENABLE(build-with-cxx,
588 [ --enable-build-with-cxx build with C++ compiler instead of C compiler],
589 ENABLE_BUILD_WITH_CXX=$enableval,
590 ENABLE_BUILD_WITH_CXX=no)
591 AC_SUBST(ENABLE_BUILD_WITH_CXX)
592 if test "$ENABLE_BUILD_WITH_CXX" = "yes"; then
593 AC_DEFINE(ENABLE_BUILD_WITH_CXX, 1,
594 [Define if building with C++.])
599 [ --with-stabs arrange to use stabs instead of host debug format],
603 # Determine whether or not multilibs are enabled.
604 AC_ARG_ENABLE(multilib,
605 [ --enable-multilib enable library support for multiple ABIs],
606 [], [enable_multilib=yes])
607 AC_SUBST(enable_multilib)
609 # Enable __cxa_atexit for C++.
610 AC_ARG_ENABLE(__cxa_atexit,
611 [ --enable-__cxa_atexit enable __cxa_atexit for C++],
614 # Enable C extension for decimal float if target supports it.
615 GCC_AC_ENABLE_DECIMAL_FLOAT([$target])
617 dfp=`if test $enable_decimal_float != no; then echo 1; else echo 0; fi`
618 AC_DEFINE_UNQUOTED(ENABLE_DECIMAL_FLOAT, $dfp,
619 [Define to 1 to enable decimal float extension to C.])
621 # Use default_decimal_float for dependency.
622 enable_decimal_float=$default_decimal_float
624 bid=`if test $enable_decimal_float = bid; then echo 1; else echo 0; fi`
625 AC_DEFINE_UNQUOTED(ENABLE_DECIMAL_BID_FORMAT, $bid,
626 [Define to 1 to specify that we are using the BID decimal floating
627 point format instead of DPD])
629 # Enable C extension for fixed-point arithmetic.
630 AC_ARG_ENABLE(fixed-point,
631 [ --enable-fixed-point enable fixed-point arithmetic extension to C],
639 AC_MSG_WARN([fixed-point is not supported on IRIX, ignored])
640 enable_fixed_point=no
643 enable_fixed_point=yes
648 AC_MSG_WARN([fixed-point is not supported for this target, ignored])
649 enable_fixed_point=no
653 AC_SUBST(enable_fixed_point)
655 fixedpoint=`if test $enable_fixed_point = yes; then echo 1; else echo 0; fi`
656 AC_DEFINE_UNQUOTED(ENABLE_FIXED_POINT, $fixedpoint,
657 [Define to 1 to enable fixed-point arithmetic extension to C.])
660 # Pass with no value to take the default
661 # Pass with a value to specify a thread package
662 AC_ARG_ENABLE(threads,
663 [ --enable-threads enable thread usage for target GCC
664 --enable-threads=LIB use LIB thread package for target GCC],,
668 [ --enable-tls enable or disable generation of tls code
669 overriding the assembler check for tls support],
673 *) AC_MSG_ERROR(['$enable_tls' is an invalid value for --enable-tls.
674 Valid choices are 'yes' and 'no'.]) ;;
678 AC_ARG_ENABLE(objc-gc,
679 [ --enable-objc-gc enable the use of Boehm's garbage collector with
680 the GNU Objective-C runtime],
681 if test x$enable_objc_gc = xno; then
689 [ --with-dwarf2 force the default debug format to be DWARF 2],
690 dwarf2="$with_dwarf2",
693 AC_ARG_ENABLE(shared,
694 [ --disable-shared don't provide a shared libgcc],
696 case $enable_shared in
700 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
701 for pkg in $enableval; do
702 if test "X$pkg" = "Xgcc" || test "X$pkg" = "Xlibgcc"; then
709 ], [enable_shared=yes])
710 AC_SUBST(enable_shared)
712 AC_ARG_WITH(build-sysroot,
713 [ --with-build-sysroot=sysroot
714 use sysroot as the system root during the build])
717 [ --with-sysroot[=DIR] Search for usr/lib, usr/include, et al, within DIR.],
719 case ${with_sysroot} in
720 yes) TARGET_SYSTEM_ROOT='${exec_prefix}/${target_noncanonical}/sys-root' ;;
721 *) TARGET_SYSTEM_ROOT=$with_sysroot ;;
724 TARGET_SYSTEM_ROOT_DEFINE='-DTARGET_SYSTEM_ROOT=\"$(TARGET_SYSTEM_ROOT)\"'
725 CROSS_SYSTEM_HEADER_DIR='$(TARGET_SYSTEM_ROOT)$${sysroot_headers_suffix}$(NATIVE_SYSTEM_HEADER_DIR)'
727 if test "x$prefix" = xNONE; then
728 test_prefix=/usr/local
732 if test "x$exec_prefix" = xNONE; then
733 test_exec_prefix=$test_prefix
735 test_exec_prefix=$exec_prefix
737 case ${TARGET_SYSTEM_ROOT} in
738 "${test_prefix}"|"${test_prefix}/"*|\
739 "${test_exec_prefix}"|"${test_exec_prefix}/"*|\
740 '${prefix}'|'${prefix}/'*|\
741 '${exec_prefix}'|'${exec_prefix}/'*)
742 t="$TARGET_SYSTEM_ROOT_DEFINE -DTARGET_SYSTEM_ROOT_RELOCATABLE"
743 TARGET_SYSTEM_ROOT_DEFINE="$t"
748 TARGET_SYSTEM_ROOT_DEFINE=
749 CROSS_SYSTEM_HEADER_DIR='$(gcc_tooldir)/sys-include'
751 AC_SUBST(TARGET_SYSTEM_ROOT)
752 AC_SUBST(TARGET_SYSTEM_ROOT_DEFINE)
753 AC_SUBST(CROSS_SYSTEM_HEADER_DIR)
756 [AS_HELP_STRING([--with-specs=SPECS],
757 [add SPECS to driver command-line processing])],
758 [CONFIGURE_SPECS=$withval],
761 AC_SUBST(CONFIGURE_SPECS)
763 ACX_PKGVERSION([GCC])
764 ACX_BUGURL([http://gcc.gnu.org/bugs.html])
766 # Sanity check enable_languages in case someone does not run the toplevel
767 # configure # script.
768 AC_ARG_ENABLE(languages,
769 [ --enable-languages=LIST specify which front-ends to build],
770 [case ,${enable_languages}, in
772 # go safe -- we cannot be much sure without the toplevel
774 # analysis of which target libs are present and usable
778 AC_MSG_ERROR([only the toplevel supports --enable-languages=all])
783 enable_languages=c,${enable_languages}
786 [enable_languages=c])
788 AC_ARG_WITH(multilib-list,
789 [ --with-multilib-list Select multilibs (SH only)],
791 with_multilib_list=default)
793 # -------------------------
794 # Checks for other programs
795 # -------------------------
799 # Find some useful tools
801 # We need awk to create options.c and options.h.
802 # Bail out if it's missing.
804 "") AC_MSG_ERROR([can't build without awk, bailing out]) ;;
812 # By default, the Darwin ranlib will not treat common symbols as
813 # definitions when building the archive table of contents. Other
814 # ranlibs do that; pass an option to the Darwin ranlib that makes
815 # it behave similarly.
821 AC_SUBST(ranlib_flags)
825 # See if cmp has --ignore-initial.
826 gcc_AC_PROG_CMP_IGNORE_INITIAL
828 # See if we have the mktemp command.
829 AC_CHECK_PROG(have_mktemp_command, mktemp, yes, no)
831 # See if makeinfo has been installed and is modern enough
832 # that we can use it.
833 ACX_CHECK_PROG_VER(MAKEINFO, makeinfo, --version,
834 [GNU texinfo.* \([0-9][0-9.]*\)],
835 [4.[7-9]*|4.[1-9][0-9]*|[5-9]*|[1-9][0-9]*])
836 if test $gcc_cv_prog_makeinfo_modern = no; then
838 *** Makeinfo is missing or too old.
839 *** Info documentation will not be built.])
846 # Is pod2man recent enough to regenerate manpages?
847 AC_MSG_CHECKING([for recent Pod::Man])
848 if (perl -e 'use 1.10 Pod::Man') >/dev/null 2>&1; then
850 GENERATED_MANPAGES=generated-manpages
855 AC_SUBST(GENERATED_MANPAGES)
857 MISSING="${CONFIG_SHELL-/bin/sh} $ac_aux_dir/missing"
860 dnl Don't use AC_PROG_LEX; we insist on flex.
861 dnl LEXLIB is not useful in gcc.
862 AC_CHECK_PROGS([FLEX], flex, [$MISSING flex])
865 AC_CHECK_PROGS([BISON], bison, [$MISSING bison])
867 # Binutils are not build modules, unlike bison/flex/makeinfo. So we
868 # check for build == host before using them.
871 if test x${build} = x${host} && test -f $srcdir/../binutils/nm.c \
872 && test -d ../binutils ; then
873 NM='${objdir}/../binutils/nm-new'
875 AC_CHECK_PROG(NM, nm, nm, ${CONFIG_SHELL-/bin/sh} ${srcdir}/../missing nm)
879 if test x${build} = x${host} && test -f $srcdir/../binutils/ar.c \
880 && test -d ../binutils ; then
881 AR='${objdir}/../binutils/ar'
883 AC_CHECK_PROG(AR, ar, ar, ${CONFIG_SHELL-/bin/sh} ${srcdir}/../missing ar)
887 # --------------------
888 # Checks for C headers
889 # --------------------
891 # Need to reject headers which give warnings, so that the -Werror bootstrap
892 # works later. *sigh* This needs to come before all header checks.
899 AC_CHECK_HEADERS(limits.h stddef.h string.h strings.h stdlib.h time.h iconv.h \
900 fcntl.h unistd.h sys/file.h sys/time.h sys/mman.h \
901 sys/resource.h sys/param.h sys/times.h sys/stat.h \
902 direct.h malloc.h langinfo.h ldfcn.h locale.h wchar.h)
904 # Check for thread headers.
905 AC_CHECK_HEADER(thread.h, [have_thread_h=yes], [have_thread_h=])
906 AC_CHECK_HEADER(pthread.h, [have_pthread_h=yes], [have_pthread_h=])
908 # These tests can't be done till we know if we have limits.h.
912 # ----------------------
913 # Checks for C++ headers
914 # ----------------------
916 dnl Autoconf will give an error in the configure script if there is no
917 dnl C++ preprocessor. Hack to prevent that.
918 m4_pushdef([AC_MSG_ERROR], m4_defn([AC_MSG_WARN]))[]dnl
920 m4_popdef([AC_MSG_ERROR])[]dnl
924 AC_CHECK_HEADERS(unordered_map)
925 AC_CHECK_HEADERS(tr1/unordered_map)
926 AC_CHECK_HEADERS(ext/hash_map)
935 # These libraries may be used by collect2.
936 # We may need a special search path to get them linked.
937 AC_CACHE_CHECK(for collect2 libraries, gcc_cv_collect2_libs,
939 for libs in '' -lld -lmld \
940 '-L/usr/lib/cmplrs/cc2.11 -lmld' \
941 '-L/usr/lib/cmplrs/cc3.11 -lmld'
944 AC_TRY_LINK_FUNC(ldopen,
945 [gcc_cv_collect2_libs="$libs"; break])
948 test -z "$gcc_cv_collect2_libs" && gcc_cv_collect2_libs='none required'])
949 case $gcc_cv_collect2_libs in
951 *) COLLECT2_LIBS=$gcc_cv_collect2_libs ;;
953 AC_SUBST(COLLECT2_LIBS)
955 # When building Ada code on Alpha, we need exc_resume which is usually in
956 # -lexc. So test for it.
959 AC_SEARCH_LIBS(exc_resume, exc)
962 AC_SUBST(GNAT_LIBEXC)
964 # Some systems put ldexp and frexp in libm instead of libc; assume
965 # they're both in the same place. jcf-dump needs them.
968 AC_SEARCH_LIBS(ldexp, m)
973 # Use <inttypes.h> only if it exists,
974 # doesn't clash with <sys/types.h>, and declares intmax_t.
975 AC_MSG_CHECKING(for inttypes.h)
976 AC_CACHE_VAL(gcc_cv_header_inttypes_h,
977 [AC_COMPILE_IFELSE([AC_LANG_PROGRAM(
978 [[#include <sys/types.h>
979 #include <inttypes.h>]],
980 [[intmax_t i = -1;]])],
981 [gcc_cv_header_inttypes_h=yes],
982 [gcc_cv_header_inttypes_h=no])])
983 AC_MSG_RESULT($gcc_cv_header_inttypes_h)
984 if test $gcc_cv_header_inttypes_h = yes; then
985 AC_DEFINE(HAVE_INTTYPES_H, 1,
986 [Define if you have a working <inttypes.h> header file.])
989 dnl Disabled until we have a complete test for buggy enum bitfields.
990 dnl gcc_AC_C_ENUM_BF_UNSIGNED
992 define(gcc_UNLOCKED_FUNCS, clearerr_unlocked feof_unlocked dnl
993 ferror_unlocked fflush_unlocked fgetc_unlocked fgets_unlocked dnl
994 fileno_unlocked fprintf_unlocked fputc_unlocked fputs_unlocked dnl
995 fread_unlocked fwrite_unlocked getchar_unlocked getc_unlocked dnl
996 putchar_unlocked putc_unlocked)
997 AC_CHECK_FUNCS(times clock kill getrlimit setrlimit atoll atoq \
998 sysconf strsignal getrusage nl_langinfo \
999 gettimeofday mbstowcs wcswidth mmap setlocale \
1002 if test x$ac_cv_func_mbstowcs = xyes; then
1003 AC_CACHE_CHECK(whether mbstowcs works, gcc_cv_func_mbstowcs_works,
1004 [ AC_RUN_IFELSE([AC_LANG_SOURCE([[#include <stdlib.h>
1010 [gcc_cv_func_mbstowcs_works=yes],
1011 [gcc_cv_func_mbstowcs_works=no],
1012 [gcc_cv_func_mbstowcs_works=yes])])
1013 if test x$gcc_cv_func_mbstowcs_works = xyes; then
1014 AC_DEFINE(HAVE_WORKING_MBSTOWCS, 1,
1015 [Define this macro if mbstowcs does not crash when its
1016 first argument is NULL.])
1020 AC_CHECK_TYPE(ssize_t, int)
1021 AC_CHECK_TYPE(caddr_t, char *)
1023 gcc_AC_FUNC_MMAP_BLACKLIST
1027 # Under VMS, vfork works very differently than on Unix. The standard test
1028 # won't work, and it isn't easily adaptable. It makes more sense to
1030 ac_cv_func_vfork_works=yes
1036 # Until we have in-tree GNU iconv:
1038 AC_SUBST(LIBICONV_DEP)
1044 # We will need to find libiberty.h and ansidecl.h
1045 saved_CFLAGS="$CFLAGS"
1046 CFLAGS="$CFLAGS -I${srcdir} -I${srcdir}/../include"
1047 gcc_AC_CHECK_DECLS(getenv atol asprintf sbrk abort atof getcwd getwd \
1048 strsignal strstr strverscmp \
1049 errno snprintf vsnprintf vasprintf malloc realloc calloc \
1050 free basename getopt clock getpagesize gcc_UNLOCKED_FUNCS, , ,[
1051 #include "ansidecl.h"
1052 #include "system.h"])
1054 gcc_AC_CHECK_DECLS(getrlimit setrlimit getrusage, , ,[
1055 #include "ansidecl.h"
1057 #ifdef HAVE_SYS_RESOURCE_H
1058 #include <sys/resource.h>
1062 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
1063 #include "ansidecl.h"
1065 #ifdef HAVE_SYS_RESOURCE_H
1066 #include <sys/resource.h>
1068 ]], [[rlim_t l = 0;]])],[],[AC_DEFINE([rlim_t],[long],
1069 [Define to `long' if <sys/resource.h> doesn't define.])])
1071 # On AIX 5.2, <ldfcn.h> conflicts with <fcntl.h>, as both define incompatible
1072 # FREAD and FWRITE macros. Fortunately, for GCC's single usage of ldgetname
1073 # in collect2.c, <fcntl.h> isn't visible, but the configure test below needs
1074 # to undef these macros to get the correct value for HAVE_DECL_LDGETNAME.
1075 gcc_AC_CHECK_DECLS(ldgetname, , ,[
1076 #include "ansidecl.h"
1085 gcc_AC_CHECK_DECLS(times, , ,[
1086 #include "ansidecl.h"
1088 #ifdef HAVE_SYS_TIMES_H
1089 #include <sys/times.h>
1093 gcc_AC_CHECK_DECLS(sigaltstack, , ,[
1094 #include "ansidecl.h"
1099 # More time-related stuff.
1100 AC_CACHE_CHECK(for struct tms, ac_cv_struct_tms, [
1101 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
1102 #include "ansidecl.h"
1104 #ifdef HAVE_SYS_TIMES_H
1105 #include <sys/times.h>
1107 ]], [[struct tms tms;]])],[ac_cv_struct_tms=yes],[ac_cv_struct_tms=no])])
1108 if test $ac_cv_struct_tms = yes; then
1109 AC_DEFINE(HAVE_STRUCT_TMS, 1,
1110 [Define if <sys/times.h> defines struct tms.])
1113 # use gcc_cv_* here because this doesn't match the behavior of AC_CHECK_TYPE.
1114 # revisit after autoconf 2.50.
1115 AC_CACHE_CHECK(for clock_t, gcc_cv_type_clock_t, [
1116 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
1117 #include "ansidecl.h"
1119 ]], [[clock_t x;]])],[gcc_cv_type_clock_t=yes],[gcc_cv_type_clock_t=no])])
1120 if test $gcc_cv_type_clock_t = yes; then
1121 AC_DEFINE(HAVE_CLOCK_T, 1,
1122 [Define if <time.h> defines clock_t.])
1125 # Restore CFLAGS from before the gcc_AC_NEED_DECLARATIONS tests.
1126 CFLAGS="$saved_CFLAGS"
1128 gcc_AC_INITFINI_ARRAY
1130 # mkdir takes a single argument on some systems.
1131 gcc_AC_FUNC_MKDIR_TAKES_ONE_ARG
1139 # With Setjmp/Longjmp based exception handling.
1140 AC_ARG_ENABLE(sjlj-exceptions,
1141 [ --enable-sjlj-exceptions
1142 arrange to use setjmp/longjmp exception handling],
1145 if test $enableval != yes; then
1146 AC_MSG_WARN([dwarf2 exceptions not supported, sjlj exceptions forced])
1151 force_sjlj_exceptions=yes],
1154 force_sjlj_exceptions=yes
1158 force_sjlj_exceptions=no
1161 if test $force_sjlj_exceptions = yes; then
1162 sjlj=`if test $enableval = yes; then echo 1; else echo 0; fi`
1163 AC_DEFINE_UNQUOTED(CONFIG_SJLJ_EXCEPTIONS, $sjlj,
1164 [Define 0/1 to force the choice for exception handling model.])
1167 # For platforms with the unwind ABI which includes an unwind library,
1168 # libunwind, we can choose to use the system libunwind.
1169 # config.gcc also contains tests of with_system_libunwind.
1170 GCC_CHECK_UNWIND_GETIPINFO
1172 # --------------------------------------------------------
1173 # Build, host, and target specific configuration fragments
1174 # --------------------------------------------------------
1176 # Collect build-machine-specific information.
1177 . ${srcdir}/config.build
1179 # Collect host-machine-specific information.
1180 . ${srcdir}/config.host
1184 # Collect target-machine-specific information.
1185 . ${srcdir}/config.gcc
1187 extra_objs="${host_extra_objs} ${extra_objs}"
1188 extra_gcc_objs="${host_extra_gcc_objs} ${extra_gcc_objs}"
1190 # Default the target-machine variables that were not explicitly set.
1191 if test x"$tm_file" = x
1192 then tm_file=$cpu_type/$cpu_type.h; fi
1194 if test x"$extra_headers" = x
1195 then extra_headers=; fi
1197 if test x$md_file = x
1198 then md_file=$cpu_type/$cpu_type.md; fi
1200 if test x$out_file = x
1201 then out_file=$cpu_type/$cpu_type.c; fi
1203 if test x"$tmake_file" = x
1204 then tmake_file=$cpu_type/t-$cpu_type
1207 if test x"$dwarf2" = xyes
1208 then tm_file="$tm_file tm-dwarf2.h"
1211 # Say what files are being used for the output code and MD file.
1212 echo "Using \`$srcdir/config/$out_file' for machine-specific logic."
1213 echo "Using \`$srcdir/config/$md_file' as machine description file."
1215 # If any of the xm_file variables contain nonexistent files, warn
1216 # about them and drop them.
1219 for x in $build_xm_file; do
1220 if test -f $srcdir/config/$x
1222 else AC_MSG_WARN($srcdir/config/$x does not exist.)
1228 for x in $host_xm_file; do
1229 if test -f $srcdir/config/$x
1231 else AC_MSG_WARN($srcdir/config/$x does not exist.)
1237 for x in $xm_file; do
1238 if test -f $srcdir/config/$x
1240 else AC_MSG_WARN($srcdir/config/$x does not exist.)
1246 for f in $tm_file; do
1249 if test $count = ax; then
1250 echo "Using \`$srcdir/config/$tm_file' as target machine macro file."
1252 echo "Using the following target machine macro files:"
1253 for f in $tm_file; do
1254 echo " $srcdir/config/$f"
1258 if test x$need_64bit_hwint = xyes; then
1259 AC_DEFINE(NEED_64BIT_HOST_WIDE_INT, 1,
1260 [Define to 1 if HOST_WIDE_INT must be 64 bits wide (see hwint.h).])
1263 if test x$use_long_long_for_widest_fast_int = xyes; then
1264 AC_DEFINE(USE_LONG_LONG_FOR_WIDEST_FAST_INT, 1,
1265 [Define to 1 if the 'long long' (or '__int64') is wider than 'long' but still
1266 efficiently supported by the host hardware.])
1270 for f in $host_xm_file; do
1273 if test $count = a; then
1275 elif test $count = ax; then
1276 echo "Using \`$srcdir/config/$host_xm_file' as host machine macro file."
1278 echo "Using the following host machine macro files:"
1279 for f in $host_xm_file; do
1280 echo " $srcdir/config/$f"
1283 echo "Using ${out_host_hook_obj} for host machine hooks."
1285 if test "$host_xm_file" != "$build_xm_file"; then
1287 for f in $build_xm_file; do
1290 if test $count = a; then
1292 elif test $count = ax; then
1293 echo "Using \`$srcdir/config/$build_xm_file' as build machine macro file."
1295 echo "Using the following build machine macro files:"
1296 for f in $build_xm_file; do
1297 echo " $srcdir/config/$f"
1304 AC_CACHE_CHECK([whether mcontext_t fields have underscores],
1305 gcc_cv_mcontext_underscores,
1307 #include <sys/cdefs.h>
1308 #include <sys/signal.h>
1309 #include <ucontext.h>
1310 int main() { mcontext_t m; if (m->ss.srr0) return 0; return 0; }
1312 gcc_cv_mcontext_underscores=no, gcc_cv_mcontext_underscores=yes))
1313 if test $gcc_cv_mcontext_underscores = yes; then
1314 AC_DEFINE(HAS_MCONTEXT_T_UNDERSCORES,,dnl
1315 [mcontext_t fields start with __])
1324 # Check if a valid thread package
1325 case ${enable_threads} in
1328 target_thread_file='single'
1332 target_thread_file='single'
1334 aix | dce | gnat | irix | posix | posix95 | rtems | \
1335 single | solaris | vxworks | win32 | mipssde)
1336 target_thread_file=${enable_threads}
1339 echo "${enable_threads} is an unknown thread package" 1>&2
1344 if test x${thread_file} = x; then
1345 # No thread file set by target-specific clauses in config.gcc,
1346 # so use file chosen by default logic above
1347 thread_file=${target_thread_file}
1350 # Make gthr-default.h if we have a thread file.
1352 if test $thread_file != single; then
1353 echo "#include \"gthr-${thread_file}.h\"" > gthr-default.h-t
1354 if diff gthr-default.h-t gthr-default.h 2>/dev/null; then
1355 rm -f gthr-default.h-t
1357 mv -f gthr-default.h-t gthr-default.h
1359 gthread_flags=-DHAVE_GTHR_DEFAULT
1361 AC_SUBST(gthread_flags)
1368 if test x$enable___cxa_atexit = xyes || \
1369 test x$enable___cxa_atexit = x -a x$default_use_cxa_atexit = xyes; then
1370 if test x$host = x$target; then
1372 # mingw32 doesn't have __cxa_atexit but uses atexit registration
1373 # keyed to flag_use_cxa_atexit
1378 AC_CHECK_FUNC(__cxa_atexit,[use_cxa_atexit=yes],
1379 [echo "__cxa_atexit can't be enabled on this target"])
1383 # We can't check for __cxa_atexit when building a cross, so assume
1387 if test x$use_cxa_atexit = xyes; then
1388 AC_DEFINE(DEFAULT_USE_CXA_ATEXIT, 2,
1389 [Define if you want to use __cxa_atexit, rather than atexit, to
1390 register C++ destructors for local statics and global objects.
1391 This is essential for fully standards-compliant handling of
1392 destructors, but requires __cxa_atexit in libc.])
1396 # Look for a file containing extra machine modes.
1397 if test -n "$extra_modes" && test -f $srcdir/config/$extra_modes; then
1398 extra_modes_file='$(srcdir)'/config/${extra_modes}
1399 AC_SUBST(extra_modes_file)
1400 AC_DEFINE_UNQUOTED(EXTRA_MODES_FILE, "config/$extra_modes",
1401 [Define to the name of a file containing a list of extra machine modes
1402 for this architecture.])
1405 # Convert extra_options into a form suitable for Makefile use.
1408 for f in $extra_options; do
1409 extra_opt_files="$extra_opt_files \$(srcdir)/config/$f"
1410 all_opt_files="$all_opt_files $srcdir/config/$f"
1412 AC_SUBST(extra_opt_files)
1414 # auto-host.h is the file containing items generated by autoconf and is
1415 # the first file included by config.h.
1416 # If host=build, it is correct to have bconfig include auto-host.h
1417 # as well. If host!=build, we are in error and need to do more
1418 # work to find out the build config parameters.
1419 if test x$host = x$build
1421 build_auto=auto-host.h
1423 # We create a subdir, then run autoconf in the subdir.
1424 # To prevent recursion we set host and build for the new
1425 # invocation of configure to the build for this invocation
1432 /* | [A-Za-z]:[\\/]* ) realsrcdir=${srcdir};;
1433 *) realsrcdir=../${srcdir};;
1435 saved_CFLAGS="${CFLAGS}"
1436 CC="${CC_FOR_BUILD}" CFLAGS="${CFLAGS_FOR_BUILD}" \
1437 LDFLAGS="${LDFLAGS_FOR_BUILD}" \
1438 ${realsrcdir}/configure \
1439 --enable-languages=${enable_languages-all} \
1440 --target=$target_alias --host=$build_alias --build=$build_alias
1441 CFLAGS="${saved_CFLAGS}"
1443 # We just finished tests for the build machine, so rename
1444 # the file auto-build.h in the gcc directory.
1445 mv auto-host.h ../auto-build.h
1448 build_auto=auto-build.h
1450 AC_SUBST(build_subdir)
1452 tm_file="${tm_file} defaults.h"
1453 tm_p_file="${tm_p_file} tm-preds.h"
1454 host_xm_file="auto-host.h ansidecl.h ${host_xm_file}"
1455 build_xm_file="${build_auto} ansidecl.h ${build_xm_file}"
1456 # We don't want ansidecl.h in target files, write code there in ISO/GNU C.
1457 # put this back in temporarily.
1458 xm_file="auto-host.h ansidecl.h ${xm_file}"
1465 # Compile in configure arguments.
1466 if test -f configargs.h ; then
1467 # Being re-configured.
1468 gcc_config_arguments=`grep configuration_arguments configargs.h | sed -e 's/.*"\([^"]*\)".*/\1/'`
1469 gcc_config_arguments="$gcc_config_arguments : (reconfigured) $TOPLEVEL_CONFIGURE_ARGUMENTS"
1471 gcc_config_arguments="$TOPLEVEL_CONFIGURE_ARGUMENTS"
1474 # Double all backslashes and backslash all quotes to turn
1475 # gcc_config_arguments into a C string.
1476 sed -e 's/\\/\\\\/g; s/"/\\"/g' <<EOF >conftest.out
1477 $gcc_config_arguments
1479 gcc_config_arguments_str=`cat conftest.out`
1482 cat > configargs.h <<EOF
1483 /* Generated automatically. */
1484 static const char configuration_arguments[] = "$gcc_config_arguments_str";
1485 static const char thread_model[] = "$thread_file";
1487 static const struct {
1488 const char *name, *value;
1489 } configure_default_options[] = $configure_default_options;
1494 gcc_BASEVER=`cat $srcdir/BASE-VER`
1495 gcc_DEVPHASE=`cat $srcdir/DEV-PHASE`
1496 gcc_DATESTAMP=`cat $srcdir/DATESTAMP`
1497 if test -f $srcdir/REVISION ; then
1498 gcc_REVISION=`cat $srcdir/REVISION`
1502 cat > plugin-version.h <<EOF
1503 #include "configargs.h"
1505 static char basever[] = "$gcc_BASEVER";
1506 static char datestamp[] = "$gcc_DATESTAMP";
1507 static char devphase[] = "$gcc_DEVPHASE";
1508 static char revision[] = "$gcc_REVISION";
1510 /* FIXME plugins: We should make the version information more precise.
1511 One way to do is to add a checksum. */
1513 static struct plugin_gcc_version gcc_version = {basever, datestamp,
1515 configuration_arguments};
1519 # Internationalization
1520 ZW_GNU_GETTEXT_SISTER_DIR
1522 # If LIBINTL contains LIBICONV, then clear LIBICONV so we don't get
1523 # -liconv on the link line twice.
1524 case "$LIBINTL" in *$LIBICONV*)
1528 AC_ARG_ENABLE(secureplt,
1529 [ --enable-secureplt enable -msecure-plt by default for PowerPC],
1532 AC_ARG_ENABLE(leading-mingw64-underscores,
1533 AS_HELP_STRING([--enable-leading-mingw64-underscores],
1534 [Enable leading underscores on 64 bit mingw targets]),
1536 AS_IF([ test x"$enable_leading_mingw64_underscores" = xyes ],
1537 [AC_DEFINE(USE_MINGW64_LEADING_UNDERSCORES, 1,
1538 [Define if we should use leading underscore on 64 bit mingw targets])])
1541 [ --enable-cld enable -mcld by default for 32bit x86], [],
1544 AC_ARG_ENABLE(frame-pointer,
1545 [ --enable-frame-pointer enable -fno-omit-frame-pointer by default for 32bit x86], [],
1548 linux* | darwin[[8912]]*)
1549 # Enable -fomit-frame-pointer by default for Linux and Darwin with
1551 enable_frame_pointer=no
1554 enable_frame_pointer=yes
1559 # Windows32 Registry support for specifying GCC installation paths.
1560 AC_ARG_ENABLE(win32-registry,
1561 [ --disable-win32-registry
1562 disable lookup of installation paths in the
1563 Registry on Windows hosts
1564 --enable-win32-registry enable registry lookup (default)
1565 --enable-win32-registry=KEY
1566 use KEY instead of GCC version as the last portion
1567 of the registry key],,)
1570 win32 | pe | cygwin* | mingw32* | uwin*)
1571 if test "x$enable_win32_registry" != xno; then
1572 AC_SEARCH_LIBS(RegOpenKeyExA, advapi32,, [enable_win32_registry=no])
1575 if test "x$enable_win32_registry" != xno; then
1576 AC_DEFINE(ENABLE_WIN32_REGISTRY, 1,
1577 [Define to 1 if installation paths should be looked up in the Windows
1578 Registry. Ignored on non-Windows hosts.])
1580 if test "x$enable_win32_registry" != xyes \
1581 && test "x$enable_win32_registry" != x; then
1582 AC_DEFINE_UNQUOTED(WIN32_REGISTRY_KEY, "$enable_win32_registry",
1583 [Define to be the last component of the Windows registry key under which
1584 to look for installation paths. The full key used will be
1585 HKEY_LOCAL_MACHINE/SOFTWARE/Free Software Foundation/{WIN32_REGISTRY_KEY}.
1586 The default is the GCC version number.])
1592 # Get an absolute path to the GCC top-level source directory
1593 holddir=`${PWDCMD-pwd}`
1595 topdir=`${PWDCMD-pwd}`
1598 # Conditionalize the makefile for this host machine.
1600 for f in ${host_xmake_file}
1602 if test -f ${srcdir}/config/$f
1604 xmake_file="${xmake_file} \$(srcdir)/config/$f"
1608 # Conditionalize the makefile for this target machine.
1610 for f in ${tmake_file}
1612 if test -f ${srcdir}/config/$f
1614 tmake_file_="${tmake_file_} \$(srcdir)/config/$f"
1617 tmake_file="${tmake_file_}"
1619 out_object_file=`basename $out_file .c`.o
1621 tm_file_list="options.h"
1622 tm_include_list="options.h insn-constants.h"
1623 for f in $tm_file; do
1626 f=`echo $f | sed 's/^..//'`
1627 tm_file_list="${tm_file_list} $f"
1628 tm_include_list="${tm_include_list} $f"
1631 tm_file_list="${tm_file_list} \$(srcdir)/$f"
1632 tm_include_list="${tm_include_list} $f"
1635 tm_file_list="${tm_file_list} \$(srcdir)/config/$f"
1636 tm_include_list="${tm_include_list} config/$f"
1643 for f in $tm_p_file; do
1646 tm_p_file_list="${tm_p_file_list} $f"
1647 tm_p_include_list="${tm_p_include_list} $f"
1650 tm_p_file_list="${tm_p_file_list} \$(srcdir)/config/$f"
1651 tm_p_include_list="${tm_p_include_list} config/$f"
1657 for f in $xm_file; do
1660 xm_file_list="${xm_file_list} \$(srcdir)/../include/$f"
1661 xm_include_list="${xm_include_list} $f"
1664 xm_file_list="${xm_file_list} $f"
1665 xm_include_list="${xm_include_list} $f"
1668 xm_file_list="${xm_file_list} \$(srcdir)/config/$f"
1669 xm_include_list="${xm_include_list} config/$f"
1675 host_xm_include_list=
1676 for f in $host_xm_file; do
1679 host_xm_file_list="${host_xm_file_list} \$(srcdir)/../include/$f"
1680 host_xm_include_list="${host_xm_include_list} $f"
1683 host_xm_file_list="${host_xm_file_list} $f"
1684 host_xm_include_list="${host_xm_include_list} $f"
1687 host_xm_file_list="${host_xm_file_list} \$(srcdir)/config/$f"
1688 host_xm_include_list="${host_xm_include_list} config/$f"
1694 for f in $build_xm_file; do
1697 build_xm_file_list="${build_xm_file_list} \$(srcdir)/../include/$f"
1698 build_xm_include_list="${build_xm_include_list} $f"
1700 auto-build.h | auto-host.h )
1701 build_xm_file_list="${build_xm_file_list} $f"
1702 build_xm_include_list="${build_xm_include_list} $f"
1705 build_xm_file_list="${build_xm_file_list} \$(srcdir)/config/$f"
1706 build_xm_include_list="${build_xm_include_list} config/$f"
1711 # Define macro CROSS_DIRECTORY_STRUCTURE in compilation if this is a
1712 # cross-compiler which does not use the native headers and libraries.
1713 # Also use all.cross instead of all.internal and adjust SYSTEM_HEADER_DIR.
1714 CROSS= AC_SUBST(CROSS)
1715 ALL=all.internal AC_SUBST(ALL)
1716 SYSTEM_HEADER_DIR='$(NATIVE_SYSTEM_HEADER_DIR)' AC_SUBST(SYSTEM_HEADER_DIR)
1718 if test "x$with_build_sysroot" != x; then
1719 build_system_header_dir=$with_build_sysroot'$${sysroot_headers_suffix}$(NATIVE_SYSTEM_HEADER_DIR)'
1721 # This value is used, even on a native system, because
1722 # CROSS_SYSTEM_HEADER_DIR is just
1723 # $(TARGET_SYSTEM_ROOT)$(NATIVE_SYSTEM_HEADER_DIR).
1724 build_system_header_dir='$(CROSS_SYSTEM_HEADER_DIR)'
1727 if test x$host != x$target
1729 CROSS="-DCROSS_DIRECTORY_STRUCTURE"
1731 SYSTEM_HEADER_DIR=$build_system_header_dir
1732 case "$host","$target" in
1733 # Darwin crosses can use the host system's libraries and headers,
1734 # because of the fat library support. Of course, it must be the
1735 # same version of Darwin on both sides. Allow the user to
1736 # just say --target=foo-darwin without a version number to mean
1737 # "the version on this system".
1738 *-*-darwin*,*-*-darwin*)
1739 hostos=`echo $host | sed 's/.*-darwin/darwin/'`
1740 targetos=`echo $target | sed 's/.*-darwin/darwin/'`
1741 if test $hostos = $targetos -o $targetos = darwin ; then
1743 SYSTEM_HEADER_DIR='$(NATIVE_SYSTEM_HEADER_DIR)'
1748 i?86-*-*,x86_64-*-* \
1749 | powerpc*-*-*,powerpc64*-*-*)
1750 CROSS="$CROSS -DNATIVE_CROSS" ;;
1755 if test "x$with_headers" = x; then
1762 elif test "x$TARGET_SYSTEM_ROOT" != x; then
1763 SYSTEM_HEADER_DIR=$build_system_header_dir
1766 # If this is a cross-compiler that does not
1767 # have its own set of headers then define
1770 # If this is using newlib, without having the headers available now,
1771 # then define inhibit_libc in LIBGCC2_CFLAGS.
1772 # This prevents libgcc2 from containing any code which requires libc
1774 : ${inhibit_libc=false}
1775 if { { test x$host != x$target && test "x$with_sysroot" = x ; } ||
1776 test x$with_newlib = xyes ; } &&
1777 { test "x$with_headers" = x || test "x$with_headers" = xno ; } ; then
1780 AC_SUBST(inhibit_libc)
1782 # When building gcc with a cross-compiler, we need to adjust things so
1783 # that the generator programs are still built with the native compiler.
1784 # Also, we cannot run fixincludes.
1786 # These are the normal (build=host) settings:
1787 CC_FOR_BUILD='$(CC)' AC_SUBST(CC_FOR_BUILD)
1788 BUILD_CFLAGS='$(ALL_CFLAGS)' AC_SUBST(BUILD_CFLAGS)
1789 BUILD_LDFLAGS='$(LDFLAGS)' AC_SUBST(BUILD_LDFLAGS)
1790 STMP_FIXINC=stmp-fixinc AC_SUBST(STMP_FIXINC)
1792 # And these apply if build != host, or we are generating coverage data
1793 if test x$build != x$host || test "x$coverage_flags" != x
1795 BUILD_CFLAGS='$(INTERNAL_CFLAGS) $(T_CFLAGS) $(CFLAGS_FOR_BUILD)'
1796 BUILD_LDFLAGS='$(LDFLAGS_FOR_BUILD)'
1799 # Expand extra_headers to include complete path.
1800 # This substitutes for lots of t-* files.
1802 # Prepend $(srcdir)/config/${cpu_type}/ to every entry in extra_headers.
1803 for file in ${extra_headers} ; do
1804 extra_headers_list="${extra_headers_list} \$(srcdir)/config/${cpu_type}/${file}"
1807 # If use_gcc_tgmath is set, append ginclude/tgmath.h.
1808 if test x"$use_gcc_tgmath" = xyes
1809 then extra_headers_list="${extra_headers_list} \$(srcdir)/ginclude/tgmath.h"
1812 # Define collect2 in Makefile.
1813 case $host_can_use_collect2 in
1815 *) collect2='collect2$(exeext)' ;;
1817 AC_SUBST([collect2])
1819 # Add a definition of USE_COLLECT2 if system wants one.
1820 case $use_collect2 in
1821 no) use_collect2= ;;
1824 host_xm_defines="${host_xm_defines} USE_COLLECT2"
1825 xm_defines="${xm_defines} USE_COLLECT2"
1826 case $host_can_use_collect2 in
1828 AC_MSG_ERROR([collect2 is required but cannot be built on this system])
1834 AC_DEFINE_UNQUOTED(LTOPLUGINSONAME,"${host_lto_plugin_soname}",
1835 [Define to the name of the LTO plugin DSO that must be
1836 passed to the linker's -plugin=LIB option.])
1838 # ---------------------------
1839 # Assembler & linker features
1840 # ---------------------------
1842 # During stage 2, ld is actually gcc/collect-ld, which is a small script to
1843 # discern between when to use prev-ld/ld-new and when to use ld/ld-new.
1844 # However when ld-new is first executed from the build tree, libtool will
1845 # relink it as .libs/lt-ld-new, so that it can give it an RPATH that refers
1846 # to the build tree. While doing this we need to use the previous-stage
1847 # linker, or we have an infinite loop. The presence of a shell script as
1848 # ld/ld-new, and the fact that the script *uses ld itself*, is what confuses
1849 # the gcc/collect-ld script. So we need to know how libtool works, or
1850 # exec-tool will fail.
1852 m4_defun([_LT_CONFIG_COMMANDS], [])
1855 AC_SUBST(enable_fast_install)
1857 # Identify the assembler which will work hand-in-glove with the newly
1858 # built GCC, so that we can examine its features. This is the assembler
1859 # which will be driven by the driver program.
1861 # If build != host, and we aren't building gas in-tree, we identify a
1862 # build->target assembler and hope that it will have the same features
1863 # as the host->target assembler we'll be using.
1864 gcc_cv_gas_major_version=
1865 gcc_cv_gas_minor_version=
1866 gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gas
1868 m4_pattern_allow([AS_FOR_TARGET])dnl
1869 AS_VAR_SET_IF(gcc_cv_as,, [
1870 if test -x "$DEFAULT_ASSEMBLER"; then
1871 gcc_cv_as="$DEFAULT_ASSEMBLER"
1872 elif test -f $gcc_cv_as_gas_srcdir/configure.in \
1873 && test -f ../gas/Makefile \
1874 && test x$build = x$host; then
1875 gcc_cv_as=../gas/as-new$build_exeext
1876 elif test -x as$build_exeext; then
1877 # Build using assembler in the current directory.
1878 gcc_cv_as=./as$build_exeext
1879 elif ( set dummy $AS_FOR_TARGET; test -x $[2] ); then
1880 gcc_cv_as="$AS_FOR_TARGET"
1882 AC_PATH_PROG(gcc_cv_as, $AS_FOR_TARGET)
1885 ORIGINAL_AS_FOR_TARGET=$gcc_cv_as
1886 AC_SUBST(ORIGINAL_AS_FOR_TARGET)
1887 case "$ORIGINAL_AS_FOR_TARGET" in
1888 ./as | ./as$build_exeext) ;;
1889 *) AC_CONFIG_FILES(as:exec-tool.in, [chmod +x as]) ;;
1892 AC_MSG_CHECKING(what assembler to use)
1893 if test "$gcc_cv_as" = ../gas/as-new$build_exeext; then
1894 # Single tree build which includes gas. We want to prefer it
1895 # over whatever linker top-level may have detected, since
1896 # we'll use what we're building after installation anyway.
1897 AC_MSG_RESULT(newly built gas)
1899 _gcc_COMPUTE_GAS_VERSION
1900 in_tree_gas_is_elf=no
1901 if grep 'obj_format = elf' ../gas/Makefile > /dev/null \
1902 || (grep 'obj_format = multi' ../gas/Makefile \
1903 && grep 'extra_objects =.* obj-elf' ../gas/Makefile) > /dev/null
1905 in_tree_gas_is_elf=yes
1908 AC_MSG_RESULT($gcc_cv_as)
1912 # Identify the linker which will work hand-in-glove with the newly
1913 # built GCC, so that we can examine its features. This is the linker
1914 # which will be driven by the driver program.
1916 # If build != host, and we aren't building gas in-tree, we identify a
1917 # build->target linker and hope that it will have the same features
1918 # as the host->target linker we'll be using.
1919 gcc_cv_gld_major_version=
1920 gcc_cv_gld_minor_version=
1921 gcc_cv_ld_gld_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/ld
1922 gcc_cv_ld_bfd_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/bfd
1924 AS_VAR_SET_IF(gcc_cv_ld,, [
1925 if test -x "$DEFAULT_LINKER"; then
1926 gcc_cv_ld="$DEFAULT_LINKER"
1927 elif test -f $gcc_cv_ld_gld_srcdir/configure.in \
1928 && test -f ../ld/Makefile \
1929 && test x$build = x$host; then
1930 gcc_cv_ld=../ld/ld-new$build_exeext
1931 elif test -x collect-ld$build_exeext; then
1932 # Build using linker in the current directory.
1933 gcc_cv_ld=./collect-ld$build_exeext
1934 elif ( set dummy $LD_FOR_TARGET; test -x $[2] ); then
1935 gcc_cv_ld="$LD_FOR_TARGET"
1937 AC_PATH_PROG(gcc_cv_ld, $LD_FOR_TARGET)
1940 ORIGINAL_PLUGIN_LD_FOR_TARGET=$gcc_cv_ld
1941 PLUGIN_LD=`basename $gcc_cv_ld`
1942 AC_ARG_WITH(plugin-ld,
1943 [ --with-plugin-ld=[[ARG]] specify the plugin linker],
1944 [if test x"$withval" != x; then
1945 ORIGINAL_PLUGIN_LD_FOR_TARGET="$withval"
1946 PLUGIN_LD="$withval"
1948 AC_SUBST(ORIGINAL_PLUGIN_LD_FOR_TARGET)
1949 AC_DEFINE_UNQUOTED(PLUGIN_LD, "$PLUGIN_LD", [Specify plugin linker])
1951 # Check to see if we are using gold instead of ld
1952 AC_MSG_CHECKING(whether we are using gold)
1954 if test x$gcc_cv_ld != x; then
1955 if $gcc_cv_ld --version 2>/dev/null | sed 1q \
1956 | grep "GNU gold" > /dev/null; then
1960 AC_MSG_RESULT($ld_is_gold)
1962 ORIGINAL_LD_FOR_TARGET=$gcc_cv_ld
1963 AC_SUBST(ORIGINAL_LD_FOR_TARGET)
1964 case "$ORIGINAL_LD_FOR_TARGET" in
1965 ./collect-ld | ./collect-ld$build_exeext) ;;
1966 *) AC_CONFIG_FILES(collect-ld:exec-tool.in, [chmod +x collect-ld]) ;;
1969 AC_MSG_CHECKING(what linker to use)
1970 if test "$gcc_cv_ld" = ../ld/ld-new$build_exeext; then
1971 # Single tree build which includes ld. We want to prefer it
1972 # over whatever linker top-level may have detected, since
1973 # we'll use what we're building after installation anyway.
1974 AC_MSG_RESULT(newly built ld)
1976 in_tree_ld_is_elf=no
1977 if (grep 'EMUL = .*elf' ../ld/Makefile \
1978 || grep 'EMUL = .*linux' ../ld/Makefile \
1979 || grep 'EMUL = .*lynx' ../ld/Makefile) > /dev/null; then
1980 in_tree_ld_is_elf=yes
1982 for f in $gcc_cv_ld_bfd_srcdir/configure $gcc_cv_ld_gld_srcdir/configure $gcc_cv_ld_gld_srcdir/configure.in $gcc_cv_ld_gld_srcdir/Makefile.in
1985 gcc_cv_gld_version=`sed -n -e 's/^[ ]*\(VERSION=[0-9]*\.[0-9]*.*\)/\1/p' < $f`
1986 if test x$gcc_cv_gld_version != x; then
1990 gcc_cv_gld_major_version=`expr "$gcc_cv_gld_version" : "VERSION=\([0-9]*\)"`
1991 gcc_cv_gld_minor_version=`expr "$gcc_cv_gld_version" : "VERSION=[0-9]*\.\([0-9]*\)"`
1994 AC_MSG_RESULT($gcc_cv_ld)
1998 # Figure out what nm we will be using.
1999 gcc_cv_binutils_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/binutils
2000 AS_VAR_SET_IF(gcc_cv_nm,, [
2001 if test -f $gcc_cv_binutils_srcdir/configure.in \
2002 && test -f ../binutils/Makefile \
2003 && test x$build = x$host; then
2004 gcc_cv_nm=../binutils/nm-new$build_exeext
2005 elif test -x nm$build_exeext; then
2006 gcc_cv_nm=./nm$build_exeext
2007 elif ( set dummy $NM_FOR_TARGET; test -x $[2] ); then
2008 gcc_cv_nm="$NM_FOR_TARGET"
2010 AC_PATH_PROG(gcc_cv_nm, $NM_FOR_TARGET)
2013 AC_MSG_CHECKING(what nm to use)
2014 if test "$gcc_cv_nm" = ../binutils/nm-new$build_exeext; then
2015 # Single tree build which includes binutils.
2016 AC_MSG_RESULT(newly built nm)
2019 AC_MSG_RESULT($gcc_cv_nm)
2023 ORIGINAL_NM_FOR_TARGET=$gcc_cv_nm
2024 AC_SUBST(ORIGINAL_NM_FOR_TARGET)
2025 case "$ORIGINAL_NM_FOR_TARGET" in
2026 ./nm | ./nm$build_exeext) ;;
2027 *) AC_CONFIG_FILES(nm:exec-tool.in, [chmod +x nm]) ;;
2031 # Figure out what objdump we will be using.
2032 AS_VAR_SET_IF(gcc_cv_objdump,, [
2033 if test -f $gcc_cv_binutils_srcdir/configure.in \
2034 && test -f ../binutils/Makefile \
2035 && test x$build = x$host; then
2036 # Single tree build which includes binutils.
2037 gcc_cv_objdump=../binutils/objdump$build_exeext
2038 elif test -x objdump$build_exeext; then
2039 gcc_cv_objdump=./objdump$build_exeext
2040 elif ( set dummy $OBJDUMP_FOR_TARGET; test -x $[2] ); then
2041 gcc_cv_objdump="$OBJDUMP_FOR_TARGET"
2043 AC_PATH_PROG(gcc_cv_objdump, $OBJDUMP_FOR_TARGET)
2046 AC_MSG_CHECKING(what objdump to use)
2047 if test "$gcc_cv_objdump" = ../binutils/objdump$build_exeext; then
2048 # Single tree build which includes binutils.
2049 AC_MSG_RESULT(newly built objdump)
2050 elif test x$gcc_cv_objdump = x; then
2051 AC_MSG_RESULT(not found)
2053 AC_MSG_RESULT($gcc_cv_objdump)
2056 # Figure out what readelf we will be using.
2057 AS_VAR_SET_IF(gcc_cv_readelf,, [
2058 if test -f $gcc_cv_binutils_srcdir/configure.in \
2059 && test -f ../binutils/Makefile \
2060 && test x$build = x$host; then
2061 # Single tree build which includes binutils.
2062 gcc_cv_readelf=../binutils/readelf$build_exeext
2063 elif test -x readelf$build_exeext; then
2064 gcc_cv_readelf=./readelf$build_exeext
2066 AC_PATH_PROG(gcc_cv_readelf, readelf)
2069 AC_MSG_CHECKING(what readelf to use)
2070 if test "$gcc_cv_readelf" = ../binutils/readelf$build_exeext; then
2071 # Single tree build which includes binutils.
2072 AC_MSG_RESULT(newly built readelf)
2073 elif test x$gcc_cv_readelf = x; then
2074 AC_MSG_RESULT(not found)
2076 AC_MSG_RESULT($gcc_cv_readelf)
2079 # Figure out what assembler alignment features are present.
2080 gcc_GAS_CHECK_FEATURE([.balign and .p2align], gcc_cv_as_balign_and_p2align,
2084 [AC_DEFINE(HAVE_GAS_BALIGN_AND_P2ALIGN, 1,
2085 [Define if your assembler supports .balign and .p2align.])])
2087 gcc_GAS_CHECK_FEATURE([.p2align with maximum skip], gcc_cv_as_max_skip_p2align,
2090 [AC_DEFINE(HAVE_GAS_MAX_SKIP_P2ALIGN, 1,
2091 [Define if your assembler supports specifying the maximum number
2092 of bytes to skip when using the GAS .p2align command.])])
2094 gcc_GAS_CHECK_FEATURE([.literal16], gcc_cv_as_literal16,
2097 [AC_DEFINE(HAVE_GAS_LITERAL16, 1,
2098 [Define if your assembler supports .literal16.])])
2100 gcc_GAS_CHECK_FEATURE([working .subsection -1], gcc_cv_as_subsection_m1,
2102 [conftest_label1: .word 0
2104 conftest_label2: .word 0
2106 [if test x$gcc_cv_nm != x; then
2107 $gcc_cv_nm conftest.o | grep conftest_label1 > conftest.nm1
2108 $gcc_cv_nm conftest.o | grep conftest_label2 | sed -e 's/label2/label1/' > conftest.nm2
2109 if cmp conftest.nm1 conftest.nm2 > /dev/null 2>&1
2111 else gcc_cv_as_subsection_m1=yes
2113 rm -f conftest.nm1 conftest.nm2
2115 [AC_DEFINE(HAVE_GAS_SUBSECTION_ORDERING, 1,
2116 [Define if your assembler supports .subsection and .subsection -1 starts
2117 emitting at the beginning of your section.])])
2119 gcc_GAS_CHECK_FEATURE([.weak], gcc_cv_as_weak,
2122 [AC_DEFINE(HAVE_GAS_WEAK, 1, [Define if your assembler supports .weak.])])
2124 gcc_GAS_CHECK_FEATURE([.weakref], gcc_cv_as_weakref,
2126 [ .weakref foobar, barfnot],,
2127 [AC_DEFINE(HAVE_GAS_WEAKREF, 1, [Define if your assembler supports .weakref.])])
2129 gcc_GAS_CHECK_FEATURE([.nsubspa comdat], gcc_cv_as_nsubspa_comdat,
2132 .NSUBSPA $CODE$,COMDAT],,
2133 [AC_DEFINE(HAVE_GAS_NSUBSPA_COMDAT, 1, [Define if your assembler supports .nsubspa comdat option.])])
2135 # .hidden needs to be supported in both the assembler and the linker,
2136 # because GNU LD versions before 2.12.1 have buggy support for STV_HIDDEN.
2137 # This is irritatingly difficult to feature test for; we have to check the
2138 # date string after the version number. If we've got an in-tree
2139 # ld, we don't know its patchlevel version, so we set the baseline at 2.13
2141 # The gcc_GAS_CHECK_FEATURE call just sets a cache variable.
2142 gcc_GAS_CHECK_FEATURE([.hidden], gcc_cv_as_hidden,
2146 # Solaris 9/x86 as incorrectly emits an alias for a hidden symbol with
2147 # STV_HIDDEN, so disable .hidden support if so.
2150 if test x$gcc_cv_as != x && test x$gcc_cv_objdump != x; then
2151 cat > conftest.s <<EOF
2158 if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1 \
2159 && $gcc_cv_objdump -t conftest.o 2>/dev/null | \
2160 grep '\.hidden default' > /dev/null; then
2163 gcc_cv_as_hidden=yes
2166 # Assume bug is present if objdump is missing.
2171 gcc_cv_as_hidden=yes
2175 # gnu_indirect_function type is an extension proposed at
2176 # http://groups.google/com/group/generic-abi/files. It allows dynamic runtime
2177 # selection of function implementation
2178 AC_ARG_ENABLE(gnu-indirect-function,
2179 [AS_HELP_STRING([--enable-gnu-indirect-function],
2180 [enable the use of the @gnu_indirect_function to glibc systems])],
2181 [case $enable_gnu_indirect_function in
2183 *) AC_MSG_ERROR(['$enable_gnu_indirect_function' is an invalid value for --enable-gnu-indirect-function.
2184 Valid choices are 'yes' and 'no'.]) ;;
2186 [enable_gnu_indirect_function="$default_gnu_indirect_function"])
2187 if test x$enable_gnu_indirect_function = xyes; then
2188 AC_DEFINE(HAVE_GNU_INDIRECT_FUNCTION, 1,
2189 [Define if your system supports gnu indirect functions.])
2193 if test $in_tree_ld != yes ; then
2194 ld_ver=`$gcc_cv_ld --version 2>/dev/null | sed 1q`
2195 if test x"$ld_is_gold" = xyes; then
2196 gcc_cv_ld_hidden=yes
2197 elif echo "$ld_ver" | grep GNU > /dev/null; then
2198 ld_vers=`echo $ld_ver | sed -n \
2199 -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*.*\)$,\1,p'`
2200 ld_date=`echo $ld_ver | sed -n 's,^.*\([2-9][0-9][0-9][0-9]\)[-]*\([01][0-9]\)[-]*\([0-3][0-9]\).*$,\1\2\3,p'`
2201 ld_vers_major=`expr "$ld_vers" : '\([0-9]*\)'`
2202 ld_vers_minor=`expr "$ld_vers" : '[0-9]*\.\([0-9]*\)'`
2203 ld_vers_patch=`expr "$ld_vers" : '[0-9]*\.[0-9]*\.\([0-9]*\)'`
2208 # Solaris 2 ld -V output looks like this for a regular version:
2210 # ld: Software Generation Utilities - Solaris Link Editors: 5.11-1.1699
2212 # but test versions add stuff at the end:
2214 # ld: Software Generation Utilities - Solaris Link Editors: 5.11-1.1701:onnv-ab196087-6931056-03/25/10
2216 ld_ver=`$gcc_cv_ld -V 2>&1`
2217 if echo "$ld_ver" | grep 'Solaris Link Editors' > /dev/null; then
2218 ld_vers=`echo $ld_ver | sed -n \
2219 -e 's,^.*: 5\.[0-9][0-9]*-\([0-9]\.[0-9][0-9]*\).*$,\1,p'`
2220 ld_vers_major=`expr "$ld_vers" : '\([0-9]*\)'`
2221 ld_vers_minor=`expr "$ld_vers" : '[0-9]*\.\([0-9]*\)'`
2229 AC_CACHE_CHECK(linker for .hidden support, gcc_cv_ld_hidden,
2230 [[if test $in_tree_ld = yes ; then
2232 if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 13 -o "$gcc_cv_gld_major_version" -gt 2 \
2233 && test $in_tree_ld_is_elf = yes; then
2234 gcc_cv_ld_hidden=yes
2237 gcc_cv_ld_hidden=yes
2238 if echo "$ld_ver" | grep GNU > /dev/null; then
2239 if test 0"$ld_date" -lt 20020404; then
2240 if test -n "$ld_date"; then
2241 # If there was date string, but was earlier than 2002-04-04, fail
2243 elif test -z "$ld_vers"; then
2244 # If there was no date string nor ld version number, something is wrong
2247 test -z "$ld_vers_patch" && ld_vers_patch=0
2248 if test "$ld_vers_major" -lt 2; then
2250 elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -lt 12; then
2251 gcc_cv_ld_hidden="no"
2252 elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -eq 12 -a "$ld_vers_patch" -eq 0; then
2259 hppa64*-*-hpux* | ia64*-*-hpux*)
2260 gcc_cv_ld_hidden=yes
2263 # .hidden support was backported to Solaris 8, starting with ld
2265 if test "$ld_vers_minor" -ge 276; then
2266 gcc_cv_ld_hidden=yes
2271 *-*-solaris2.9* | *-*-solaris2.1[0-9]*)
2272 # Support for .hidden in Sun ld appeared in Solaris 9 FCS, but
2273 # .symbolic was only added in Solaris 9 12/02.
2274 gcc_cv_ld_hidden=yes
2282 libgcc_visibility=no
2283 AC_SUBST(libgcc_visibility)
2284 GCC_TARGET_TEMPLATE([HAVE_GAS_HIDDEN])
2285 if test $gcc_cv_as_hidden = yes && test $gcc_cv_ld_hidden = yes; then
2286 libgcc_visibility=yes
2287 AC_DEFINE(HAVE_GAS_HIDDEN, 1,
2288 [Define if your assembler and linker support .hidden.])
2291 AC_MSG_CHECKING(linker read-only and read-write section mixing)
2292 gcc_cv_ld_ro_rw_mix=unknown
2293 if test $in_tree_ld = yes ; then
2294 if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 10 -o "$gcc_cv_gld_major_version" -gt 2 \
2295 && test $in_tree_ld_is_elf = yes; then
2296 gcc_cv_ld_ro_rw_mix=read-write
2298 elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x -a x$gcc_cv_objdump != x ; then
2299 echo '.section myfoosect, "a"' > conftest1.s
2300 echo '.section myfoosect, "aw"' > conftest2.s
2301 echo '.byte 1' >> conftest2.s
2302 echo '.section myfoosect, "a"' > conftest3.s
2303 echo '.byte 0' >> conftest3.s
2304 if $gcc_cv_as -o conftest1.o conftest1.s > /dev/null 2>&1 \
2305 && $gcc_cv_as -o conftest2.o conftest2.s > /dev/null 2>&1 \
2306 && $gcc_cv_as -o conftest3.o conftest3.s > /dev/null 2>&1 \
2307 && $gcc_cv_ld -shared -o conftest1.so conftest1.o \
2308 conftest2.o conftest3.o > /dev/null 2>&1; then
2309 gcc_cv_ld_ro_rw_mix=`$gcc_cv_objdump -h conftest1.so \
2310 | sed -e '/myfoosect/!d' -e N`
2311 if echo "$gcc_cv_ld_ro_rw_mix" | grep CONTENTS > /dev/null; then
2312 if echo "$gcc_cv_ld_ro_rw_mix" | grep READONLY > /dev/null; then
2313 gcc_cv_ld_ro_rw_mix=read-only
2315 gcc_cv_ld_ro_rw_mix=read-write
2320 rm -f conftest.* conftest[123].*
2323 if test x$gcc_cv_ld_ro_rw_mix = xread-write; then
2324 AC_DEFINE(HAVE_LD_RO_RW_SECTION_MIXING, 1,
2325 [Define if your linker links a mix of read-only
2326 and read-write sections into a read-write section.])
2328 AC_MSG_RESULT($gcc_cv_ld_ro_rw_mix)
2330 # Check if we have .[us]leb128, and support symbol arithmetic with it.
2331 gcc_GAS_CHECK_FEATURE([.sleb128 and .uleb128], gcc_cv_as_leb128,
2339 [[# GAS versions before 2.11 do not support uleb128,
2340 # despite appearing to.
2341 # ??? There exists an elf-specific test that will crash
2342 # the assembler. Perhaps it's better to figure out whether
2343 # arbitrary sections are supported and try the test.
2344 as_ver=`$gcc_cv_as --version 2>/dev/null | sed 1q`
2345 if echo "$as_ver" | grep GNU > /dev/null; then
2346 as_vers=`echo $as_ver | sed -n \
2347 -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*.*\)$,\1,p'`
2348 as_major=`expr "$as_vers" : '\([0-9]*\)'`
2349 as_minor=`expr "$as_vers" : '[0-9]*\.\([0-9]*\)'`
2350 if test $as_major -eq 2 && test $as_minor -lt 11
2352 else gcc_cv_as_leb128=yes
2355 [AC_DEFINE(HAVE_AS_LEB128, 1,
2356 [Define if your assembler supports .sleb128 and .uleb128.])])
2358 # Check if we have assembler support for unwind directives.
2359 gcc_GAS_CHECK_FEATURE([cfi directives], gcc_cv_as_cfi_directive,
2366 .cfi_escape 1, 2, 3, 4, 5
2370 # If the linker used on Solaris (like Sun ld) isn't capable of merging
2371 # read-only and read-write sections, we need to make sure that the
2372 # assembler used emits read-write .eh_frame sections.
2373 if test "x$gcc_cv_ld_ro_rw_mix" != xread-write; then
2374 if test "x$gcc_cv_objdump" != x; then
2375 if $gcc_cv_objdump -h conftest.o 2>/dev/null | \
2376 sed -e /.eh_frame/!d -e N | grep READONLY > /dev/null; then
2377 gcc_cv_as_cfi_directive=no
2380 i?86-*-solaris2.1[[0-9]]*)
2381 # On Solaris/x86, make sure that GCC and gas agree on using
2382 # read-only .eh_frame sections for 64-bit.
2383 if $gcc_cv_as --64 -o conftest.o conftest.s > /dev/null 2>&1 && \
2384 $gcc_cv_objdump -h conftest.o 2>/dev/null | \
2385 sed -e /.eh_frame/!d -e N | \
2386 grep READONLY > /dev/null; then
2387 gcc_cv_as_cfi_directive=yes
2389 gcc_cv_as_cfi_directive=no
2393 gcc_cv_as_cfi_directive=yes
2398 # no objdump, err on the side of caution
2399 gcc_cv_as_cfi_directive=no
2402 gcc_cv_as_cfi_directive=yes
2406 gcc_cv_as_cfi_directive=yes
2409 if test $gcc_cv_as_cfi_directive = yes && test x$gcc_cv_objdump != x; then
2410 gcc_GAS_CHECK_FEATURE([working cfi advance], gcc_cv_as_cfi_advance_working,
2414 .cfi_adjust_cfa_offset 64
2416 .cfi_adjust_cfa_offset 128
2419 if $gcc_cv_objdump -Wf conftest.o 2>/dev/null \
2420 | grep 'DW_CFA_advance_loc[24]:[ ][ ]*75040[ ]' >/dev/null; then
2421 gcc_cv_as_cfi_advance_working=yes
2425 # no objdump, err on the side of caution
2426 gcc_cv_as_cfi_advance_working=no
2428 GCC_TARGET_TEMPLATE(HAVE_GAS_CFI_DIRECTIVE)
2429 AC_DEFINE_UNQUOTED(HAVE_GAS_CFI_DIRECTIVE,
2430 [`if test $gcc_cv_as_cfi_directive = yes \
2431 && test $gcc_cv_as_cfi_advance_working = yes; then echo 1; else echo 0; fi`],
2432 [Define 0/1 if your assembler supports CFI directives.])
2434 GCC_TARGET_TEMPLATE(HAVE_GAS_CFI_PERSONALITY_DIRECTIVE)
2435 gcc_GAS_CHECK_FEATURE([cfi personality directive],
2436 gcc_cv_as_cfi_personality_directive, ,,
2439 .cfi_personality 0, symbol
2441 AC_DEFINE_UNQUOTED(HAVE_GAS_CFI_PERSONALITY_DIRECTIVE,
2442 [`if test $gcc_cv_as_cfi_personality_directive = yes;
2443 then echo 1; else echo 0; fi`],
2444 [Define 0/1 if your assembler supports .cfi_personality.])
2446 gcc_GAS_CHECK_FEATURE([cfi sections directive],
2447 gcc_cv_as_cfi_sections_directive, ,,
2449 .cfi_sections .debug_frame, .eh_frame
2453 win32 | pe | cygwin* | mingw32* | uwin*)
2454 # Need to check that we generated the correct relocation for the
2455 # .debug_frame section. This was fixed for binutils 2.21.
2456 gcc_cv_as_cfi_sections_directive=no
2457 if test "x$gcc_cv_objdump" != x; then
2458 if $gcc_cv_objdump -j .debug_frame -r conftest.o 2>/dev/null | \
2459 grep secrel > /dev/null; then
2460 gcc_cv_as_cfi_sections_directive=yes
2465 gcc_cv_as_cfi_sections_directive=yes
2468 GCC_TARGET_TEMPLATE(HAVE_GAS_CFI_SECTIONS_DIRECTIVE)
2469 AC_DEFINE_UNQUOTED(HAVE_GAS_CFI_SECTIONS_DIRECTIVE,
2470 [`if test $gcc_cv_as_cfi_sections_directive = yes;
2471 then echo 1; else echo 0; fi`],
2472 [Define 0/1 if your assembler supports .cfi_sections.])
2474 # GAS versions up to and including 2.11.0 may mis-optimize
2476 gcc_GAS_CHECK_FEATURE(eh_frame optimization, gcc_cv_as_eh_frame,
2484 .section .eh_frame,"aw",@progbits
2486 .4byte .LECIE1-.LSCIE1
2500 .4byte .LEFDE1-.LASFDE1
2502 .4byte .LASFDE1-__FRAME_BEGIN__
2510 [ dnl # For autoconf 2.5x, must protect trailing spaces with @&t@.
2511 cat > conftest.lit <<EOF
2512 0000 10000000 00000000 017a0001 781a0004 .........z..x...
2513 0010 01000000 12000000 18000000 00000000 ................
2514 0020 08000000 04080000 0044 .........D @&t@
2516 cat > conftest.big <<EOF
2517 0000 00000010 00000000 017a0001 781a0004 .........z..x...
2518 0010 00000001 00000012 00000018 00000000 ................
2519 0020 00000008 04000000 0844 .........D @&t@
2521 # If the assembler didn't choke, and we can objdump,
2522 # and we got the correct data, then succeed.
2523 # The text in the here-document typically retains its unix-style line
2524 # endings, while the output of objdump will use host line endings.
2525 # Therefore, use diff -b for the comparisons.
2526 if test x$gcc_cv_objdump != x \
2527 && $gcc_cv_objdump -s -j .eh_frame conftest.o 2>/dev/null \
2528 | tail -3 > conftest.got \
2529 && { diff -b conftest.lit conftest.got > /dev/null 2>&1 \
2530 || diff -b conftest.big conftest.got > /dev/null 2>&1; }
2532 gcc_cv_as_eh_frame=yes
2533 elif AC_TRY_COMMAND($gcc_cv_as -o conftest.o --traditional-format /dev/null); then
2534 gcc_cv_as_eh_frame=buggy
2536 # Uh oh, what do we do now?
2537 gcc_cv_as_eh_frame=no
2540 if test $gcc_cv_as_eh_frame = buggy; then
2541 AC_DEFINE(USE_AS_TRADITIONAL_FORMAT, 1,
2542 [Define if your assembler mis-optimizes .eh_frame data.])
2545 gcc_GAS_CHECK_FEATURE(section merging support, gcc_cv_as_shf_merge,
2546 [elf,2,12,0], [--fatal-warnings],
2547 [.section .rodata.str, "aMS", @progbits, 1])
2548 if test $gcc_cv_as_shf_merge = no; then
2549 gcc_GAS_CHECK_FEATURE(section merging support, gcc_cv_as_shf_merge,
2550 [elf,2,12,0], [--fatal-warnings],
2551 [.section .rodata.str, "aMS", %progbits, 1])
2553 AC_DEFINE_UNQUOTED(HAVE_GAS_SHF_MERGE,
2554 [`if test $gcc_cv_as_shf_merge = yes; then echo 1; else echo 0; fi`],
2555 [Define 0/1 if your assembler supports marking sections with SHF_MERGE flag.])
2557 gcc_GAS_CHECK_FEATURE(COMDAT group support, gcc_cv_as_comdat_group,
2558 [elf,2,16,0], [--fatal-warnings],
2559 [.section .text,"axG",@progbits,.foo,comdat])
2560 if test $gcc_cv_as_comdat_group = yes; then
2561 gcc_cv_as_comdat_group_percent=no
2563 gcc_GAS_CHECK_FEATURE(COMDAT group support, gcc_cv_as_comdat_group_percent,
2564 [elf,2,16,0], [--fatal-warnings],
2565 [.section .text,"axG",%progbits,.foo,comdat])
2567 if test x"$ld_is_gold" = xyes; then
2569 elif test $in_tree_ld = yes ; then
2571 if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 16 -o "$gcc_cv_gld_major_version" -gt 2 \
2572 && test $in_tree_ld_is_elf = yes; then
2575 elif echo "$ld_ver" | grep GNU > /dev/null; then
2577 if test 0"$ld_date" -lt 20050308; then
2578 if test -n "$ld_date"; then
2579 # If there was date string, but was earlier than 2005-03-08, fail
2581 elif test "$ld_vers_major" -lt 2; then
2583 elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -lt 16; then
2590 *-*-solaris2.1[1-9]*)
2591 # Sun ld has COMDAT group support since Solaris 9, but it doesn't
2592 # interoperate with GNU as until Solaris 11 build 130, i.e. ld
2595 # FIXME: Maybe need to refine later when COMDAT group support with
2596 # Sun as is implemented.
2597 if test "$ld_vers_major" -gt 1 || test "$ld_vers_minor" -ge 1688; then
2604 # Assume linkers other than GNU ld don't support COMDAT group.
2610 # Allow overriding the automatic COMDAT group tests above.
2611 AC_ARG_ENABLE(comdat,
2612 [AS_HELP_STRING([--enable-comdat], [enable COMDAT group support])],
2613 [comdat_group="$enable_comdat"])
2614 if test $comdat_group = no; then
2615 gcc_cv_as_comdat_group=no
2616 gcc_cv_as_comdat_group_percent=no
2618 AC_DEFINE_UNQUOTED(HAVE_COMDAT_GROUP,
2619 [`if test $gcc_cv_as_comdat_group = yes || test $gcc_cv_as_comdat_group_percent = yes; then echo 1; else echo 0; fi`],
2620 [Define 0/1 if your assembler and linker support COMDAT groups.])
2622 gcc_GAS_CHECK_FEATURE([line table discriminator support],
2623 gcc_cv_as_discriminator,
2627 .loc 1 1 0 discriminator 1],,
2628 [AC_DEFINE(HAVE_GAS_DISCRIMINATOR, 1,
2629 [Define if your assembler supports the .loc discriminator sub-directive.])])
2631 # Thread-local storage - the check is heavily parameterized.
2640 .section ".tdata","awT",@progbits
2643 ldq $27,__tls_get_addr($29) !literal!1
2644 lda $16,foo($29) !tlsgd!1
2645 jsr $26,($27),__tls_get_addr !lituse_tlsgd!1
2646 ldq $27,__tls_get_addr($29) !literal!2
2647 lda $16,foo($29) !tlsldm!2
2648 jsr $26,($27),__tls_get_addr !lituse_tlsldm!2
2649 ldq $1,foo($29) !gotdtprel
2650 ldah $2,foo($29) !dtprelhi
2651 lda $3,foo($2) !dtprello
2652 lda $4,foo($29) !dtprel
2653 ldq $1,foo($29) !gottprel
2654 ldah $2,foo($29) !tprelhi
2655 lda $3,foo($2) !tprello
2656 lda $4,foo($29) !tprel'
2659 tls_as_opt=--fatal-warnings
2661 cris-*-*|crisv32-*-*)
2663 .section ".tdata","awT",@progbits
2670 tls_as_opt=--fatal-warnings
2674 .section ".tdata","awT",@progbits
2686 .section ".tdata","awT",@progbits
2690 addil LT%foo-$tls_gdidx$,gp
2691 ldo RT%foo-$tls_gdidx$(%r1),%arg0
2694 addil LT%foo-$tls_ldidx$,gp
2696 ldo RT%foo-$tls_ldidx$(%r1),%arg0
2697 addil LR%foo-$tls_dtpoff$,%ret0
2698 ldo RR%foo-$tls_dtpoff$(%r1),%t1
2700 addil LT%foo-$tls_ieoff$,gp
2701 ldw RT%foo-$tls_ieoff$(%r1),%t2
2704 addil LR%foo-$tls_leoff$,%t1
2705 ldo RR%foo-$tls_leoff$(%r1),%t2'
2708 tls_as_opt=--fatal-warnings
2712 .section ".tdata","awT",%progbits
2725 i[34567]86-*-solaris2.*)
2727 tga_func=___tls_get_addr
2733 if test x$on_solaris = xyes && test x$gas_flag = xno; then
2735 .section .tdata,"awt",@progbits'
2739 AC_DEFINE(TLS_SECTION_ASM_FLAG, 't',
2740 [Define to the flag used to mark TLS sections if the default (`T') doesn't work.])
2744 .section ".tdata","awT",@progbits'
2747 tls_as_opt="--fatal-warnings"
2749 conftest_s="$conftest_s
2753 leal foo@tlsgd(,%ebx,1), %eax
2754 leal foo@tlsldm(%ebx), %eax
2755 leal foo@dtpoff(%eax), %edx
2756 movl foo@gottpoff(%ebx), %eax
2757 subl foo@gottpoff(%ebx), %eax
2758 addl foo@gotntpoff(%ebx), %eax
2759 movl foo@indntpoff, %eax
2760 movl \$foo@tpoff, %eax
2761 subl \$foo@tpoff, %eax
2762 leal foo@ntpoff(%ecx), %eax"
2766 .section ".tdata","awT",@progbits
2770 leaq foo@TLSGD(%rip), %rdi
2771 leaq foo@TLSLD(%rip), %rdi
2772 leaq foo@DTPOFF(%rax), %rdx
2773 movq foo@GOTTPOFF(%rip), %rax
2774 movq $foo@TPOFF, %rax'
2777 tls_as_opt=--fatal-warnings
2781 .section ".tdata","awT",@progbits
2784 addl r16 = @ltoff(@dtpmod(foo#)), gp
2785 addl r17 = @ltoff(@dtprel(foo#)), gp
2786 addl r18 = @ltoff(@tprel(foo#)), gp
2787 addl r19 = @dtprel(foo#), gp
2788 adds r21 = @dtprel(foo#), r13
2789 movl r23 = @dtprel(foo#)
2790 addl r20 = @tprel(foo#), gp
2791 adds r22 = @tprel(foo#), r13
2792 movl r24 = @tprel(foo#)'
2795 tls_as_opt=--fatal-warnings
2799 .section .tdata,"awT",@progbits
2803 addiu $4, $28, %tlsgd(x)
2804 addiu $4, $28, %tlsldm(x)
2805 lui $4, %dtprel_hi(x)
2806 addiu $4, $4, %dtprel_lo(x)
2807 lw $4, %gottprel(x)($28)
2808 lui $4, %tprel_hi(x)
2809 addiu $4, $4, %tprel_lo(x)'
2812 tls_as_opt='-32 --fatal-warnings'
2816 .section .tdata,"awT",@progbits
2821 move.l x@TLSGD(%a5),%a0
2822 move.l x@TLSLDM(%a5),%a0
2823 move.l x@TLSLDO(%a5),%a0
2824 move.l x@TLSIE(%a5),%a0
2825 move.l x@TLSLE(%a5),%a0'
2828 tls_as_opt='--fatal-warnings'
2832 .section ".tdata","awT",@progbits
2840 addi 3,31,ld0@got@tlsgd
2842 addi 3,31,x1@got@tlsld
2845 addis 9,3,x2@dtprel@ha
2846 addi 9,9,x2@dtprel@l
2847 lwz 9,x3@got@tprel(31)
2850 addis 9,2,x2@tprel@ha
2851 addi 9,9,x2@tprel@l'
2854 tls_as_opt="-a32 --fatal-warnings"
2858 .section ".tdata","awT",@progbits
2866 addi 3,2,ld0@got@tlsgd
2872 addi 3,2,x1@got@tlsld
2878 addis 9,3,x2@dtprel@ha
2879 addi 9,9,x2@dtprel@l
2882 ld 9,x3@got@dtprel(2)
2888 tls_as_opt="-a64 --fatal-warnings"
2892 .section ".tdata","awT",@progbits
2901 l %r1,foo@GOTNTPOFF(%r12)
2902 l %r1,0(%r1):tls_load:foo
2903 bas %r14,0(%r1,%r13):tls_gdcall:foo
2904 bas %r14,0(%r1,%r13):tls_ldcall:foo'
2907 tls_as_opt="-m31 --fatal-warnings"
2911 .section ".tdata","awT",@progbits
2919 lg %r1,foo@GOTNTPOFF(%r12)
2920 larl %r1,foo@INDNTPOFF
2921 brasl %r14,__tls_get_offset@PLT:tls_gdcall:foo
2922 brasl %r14,__tls_get_offset@PLT:tls_ldcall:foo'
2925 tls_as_opt="-m64 -Aesame --fatal-warnings"
2927 sh-*-* | sh[34]-*-*)
2929 .section ".tdata","awT",@progbits
2939 tls_as_opt=--fatal-warnings
2943 sparc*-sun-solaris2.*)
2945 tga_func=__tls_get_addr
2951 if test x$on_solaris = xyes && test x$gas_flag = xno; then
2953 .section ".tdata",#alloc,#write,#tls'
2958 .section ".tdata","awT",@progbits'
2961 tls_as_opt="-32 --fatal-warnings"
2963 conftest_s="$conftest_s
2966 sethi %tgd_hi22(foo), %o0
2967 add %o0, %tgd_lo10(foo), %o1
2968 add %l7, %o1, %o0, %tgd_add(foo)
2969 call __tls_get_addr, %tgd_call(foo)
2970 sethi %tldm_hi22(foo), %l1
2971 add %l1, %tldm_lo10(foo), %l2
2972 add %l7, %l2, %o0, %tldm_add(foo)
2973 call __tls_get_addr, %tldm_call(foo)
2974 sethi %tldo_hix22(foo), %l3
2975 xor %l3, %tldo_lox10(foo), %l4
2976 add %o0, %l4, %l5, %tldo_add(foo)
2977 sethi %tie_hi22(foo), %o3
2978 add %o3, %tie_lo10(foo), %o3
2979 ld [%l7 + %o3], %o2, %tie_ld(foo)
2980 add %g7, %o2, %o4, %tie_add(foo)
2981 sethi %tle_hix22(foo), %l1
2982 xor %l1, %tle_lox10(foo), %o5
2983 ld [%g7 + %o5], %o1"
2987 .section ".tdata","awT",@progbits
2990 movi a8, foo@TLSFUNC
2991 movi a10, foo@TLSARG
2992 callx8.tls a8, foo@TLSCALL'
2999 if test "x$enable_tls" = xno ; then
3000 : # TLS explicitly disabled.
3001 elif test "x$enable_tls" = xyes ; then
3002 set_have_as_tls=yes # TLS explicitly enabled.
3003 elif test -z "$tls_first_major"; then
3004 : # If we don't have a check, assume no support.
3006 gcc_GAS_CHECK_FEATURE(thread-local storage support, gcc_cv_as_tls,
3007 [$tls_first_major,$tls_first_minor,0], [$tls_as_opt], [$conftest_s],,
3008 [set_have_as_tls=yes])
3012 # IRIX 6.5 rld and libc.so lack TLS support, so even if gas and gld
3013 # with TLS support are in use, native TLS cannot work.
3017 # Tru64 UNIX loader and libc.so lack TLS support, so even if gas and
3018 # gld with TLS support are in use, native TLS cannot work.
3021 # TLS was introduced in the Solaris 9 FCS release and backported to
3022 # Solaris 8 patches. Support for GNU-style TLS on x86 was only
3023 # introduced in Solaris 9 4/04, replacing the earlier Sun style that Sun
3024 # ld and GCC don't support any longer.
3026 AC_MSG_CHECKING(linker and ld.so.1 TLS support)
3028 # Check ld and ld.so.1 TLS support.
3029 if echo "$ld_ver" | grep GNU > /dev/null; then
3030 # Assume all interesting versions of GNU ld have TLS support.
3031 # FIXME: still need ld.so.1 support, i.e. ld version checks below.
3035 # Solaris 8/x86 ld has GNU style TLS support since version 1.280.
3037 min_tls_ld_vers_minor=280
3039 # Solaris 8/SPARC ld has TLS support since version 1.272.
3040 sparc*-*-solaris2.8)
3041 min_tls_ld_vers_minor=272
3043 # Solaris 9/x86 ld has GNU style TLS support since version 1.374.
3045 min_tls_ld_vers_minor=374
3047 # Solaris 9/SPARC and Solaris 10+ ld have TLS support since FCS.
3048 sparc*-*-solaris2.9 | *-*-solaris2.1[[0-9]]*)
3049 min_tls_ld_vers_minor=343
3052 if test "$ld_vers_major" -gt 1 || \
3053 test "$ld_vers_minor" -ge "$min_tls_ld_vers_minor"; then
3059 AC_MSG_RESULT($ld_tls_support)
3062 save_LDFLAGS="$LDFLAGS"
3066 AC_MSG_CHECKING(alternate thread library)
3068 # TLS support was backported to Solaris 8 patches, but only lives in
3069 # the alternate thread library which became the default in Solaris 9.
3070 # We want to always use that, irrespective of TLS support.
3072 # Take multilib subdir into account. There's no spec to handle
3073 # this. The 64 symlink exists since Solaris 8.
3074 lwp_dir=/usr/lib/lwp
3075 lwp_spec="-L$lwp_dir%{m64:/64} -R$lwp_dir%{m64:/64}"
3076 LDFLAGS="-L$lwp_dir -R$lwp_dir"
3083 # Always define LIB_THREAD_LDFLAGS_SPEC, even without TLS support.
3084 AC_DEFINE_UNQUOTED(LIB_THREAD_LDFLAGS_SPEC, "$lwp_spec",
3085 [Define to the linker flags to use for -pthread.])
3086 AC_MSG_RESULT($lwp_dir)
3088 AC_MSG_CHECKING(library containing $tga_func)
3089 # Before Solaris 10, __tls_get_addr (SPARC/x64) resp. ___tls_get_addr
3090 # (32-bit x86) only lived in libthread, so check for that. Keep
3091 # set_have_as_tls if found, disable if not.
3092 AC_SEARCH_LIBS([$tga_func], [thread],, [set_have_as_tls=no])
3093 # Clear LIBS if we cannot support TLS.
3094 if test $set_have_as_tls = no; then
3097 # Always define LIB_TLS_SPEC, even without TLS support.
3098 AC_DEFINE_UNQUOTED(LIB_TLS_SPEC, "$LIBS",
3099 [Define to the library containing __tls_get_addr/___tls_get_addr.])
3100 AC_MSG_RESULT($LIBS)
3103 LDFLAGS="$save_LDFLAGS"
3106 if test $set_have_as_tls = yes ; then
3107 AC_DEFINE(HAVE_AS_TLS, 1,
3108 [Define if your assembler and linker support thread-local storage.])
3111 # Target-specific assembler checks.
3113 AC_MSG_CHECKING(linker -Bstatic/-Bdynamic option)
3114 gcc_cv_ld_static_dynamic=no
3115 gcc_cv_ld_static_option='-Bstatic'
3116 gcc_cv_ld_dynamic_option='-Bdynamic'
3117 if test $in_tree_ld = yes ; then
3118 if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 10 -o "$gcc_cv_gld_major_version" -gt 2; then
3119 gcc_cv_ld_static_dynamic=yes
3121 elif test x$gcc_cv_ld != x; then
3122 # Check if linker supports -Bstatic/-Bdynamic option
3123 if $gcc_cv_ld --help 2>/dev/null | grep -- -Bstatic > /dev/null \
3124 && $gcc_cv_ld --help 2>/dev/null | grep -- -Bdynamic > /dev/null; then
3125 gcc_cv_ld_static_dynamic=yes
3128 # Tru64 UNIX support -noso/-so_archive instead of -Bstatic/-Bdynamic.
3130 gcc_cv_ld_static_dynamic=yes
3131 gcc_cv_ld_static_option="-noso"
3132 gcc_cv_ld_dynamic_option="-so_archive"
3134 # IRIX 6 ld supports -Bstatic/-Bdynamic.
3136 gcc_cv_ld_static_dynamic=yes
3138 # Solaris 2 ld always supports -Bstatic/-Bdynamic.
3140 gcc_cv_ld_static_dynamic=yes
3145 if test x"$gcc_cv_ld_static_dynamic" = xyes; then
3146 AC_DEFINE(HAVE_LD_STATIC_DYNAMIC, 1,
3147 [Define if your linker supports -Bstatic/-Bdynamic or equivalent options.])
3148 AC_DEFINE_UNQUOTED(LD_STATIC_OPTION, "$gcc_cv_ld_static_option",
3149 [Define to the linker option to disable use of shared objects.])
3150 AC_DEFINE_UNQUOTED(LD_DYNAMIC_OPTION, "$gcc_cv_ld_dynamic_option",
3151 [Define to the linker option to enable use of shared objects.])
3153 AC_MSG_RESULT($gcc_cv_ld_static_dynamic)
3155 if test x"$demangler_in_ld" = xyes; then
3156 AC_MSG_CHECKING(linker --demangle support)
3157 gcc_cv_ld_demangle=no
3158 if test $in_tree_ld = yes; then
3159 if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 14 -o "$gcc_cv_gld_major_version" -gt 2; then \
3160 gcc_cv_ld_demangle=yes
3162 elif test x$gcc_cv_ld != x -a x"$gnu_ld" = xyes; then
3163 # Check if the GNU linker supports --demangle option
3164 if $gcc_cv_ld --help 2>/dev/null | grep no-demangle > /dev/null; then
3165 gcc_cv_ld_demangle=yes
3168 if test x"$gcc_cv_ld_demangle" = xyes; then
3169 AC_DEFINE(HAVE_LD_DEMANGLE, 1,
3170 [Define if your linker supports --demangle option.])
3172 AC_MSG_RESULT($gcc_cv_ld_demangle)
3175 AC_MSG_CHECKING(linker plugin support)
3176 gcc_cv_lto_plugin=no
3177 if test -f liblto_plugin.la; then
3178 if test $in_tree_ld = yes -a x"$ORIGINAL_PLUGIN_LD_FOR_TARGET=" = x"$gcc_cv_ld"; then
3179 if test x"$ld_is_gold" = xyes; then
3180 gcc_cv_lto_plugin=yes
3181 elif test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 21 -o "$gcc_cv_gld_major_version" -gt 2; then \
3182 gcc_cv_lto_plugin=yes
3184 # Check if the linker supports --plugin-opt option
3185 elif $ORIGINAL_PLUGIN_LD_FOR_TARGET --help 2>/dev/null | grep plugin-opt > /dev/null; then
3186 gcc_cv_lto_plugin=yes
3189 if test x"$gcc_cv_lto_plugin" = xyes; then
3190 AC_DEFINE(HAVE_LTO_PLUGIN, 1,
3191 [Define if your linker supports plugin.])
3193 AC_MSG_RESULT($gcc_cv_lto_plugin)
3196 # All TARGET_ABI_OSF targets.
3197 alpha*-*-osf* | alpha*-*-linux* | alpha*-*-*bsd*)
3198 gcc_GAS_CHECK_FEATURE([explicit relocation support],
3199 gcc_cv_as_alpha_explicit_relocs, [2,12,0],,
3202 extbl $3, $2, $3 !lituse_bytoff!1
3203 ldq $2, a($29) !literal!1
3204 ldq $4, b($29) !literal!2
3205 ldq_u $3, 0($2) !lituse_base!1
3206 ldq $27, f($29) !literal!5
3207 jsr $26, ($27), f !lituse_jsr!5
3208 ldah $29, 0($26) !gpdisp!3
3209 lda $0, c($29) !gprel
3210 ldah $1, d($29) !gprelhigh
3211 lda $1, d($1) !gprellow
3212 lda $29, 0($29) !gpdisp!3],,
3213 [AC_DEFINE(HAVE_AS_EXPLICIT_RELOCS, 1,
3214 [Define if your assembler supports explicit relocations.])])
3215 gcc_GAS_CHECK_FEATURE([jsrdirect relocation support],
3216 gcc_cv_as_alpha_jsrdirect_relocs, [2,16,90],,
3219 ldq $27, a($29) !literal!1
3220 jsr $26, ($27), a !lituse_jsrdirect!1],,
3221 [AC_DEFINE(HAVE_AS_JSRDIRECT_RELOCS, 1,
3222 [Define if your assembler supports the lituse_jsrdirect relocation.])])
3226 gcc_GAS_CHECK_FEATURE([-no-mul-bug-abort option],
3227 gcc_cv_as_cris_no_mul_bug,[2,15,91],
3228 [-no-mul-bug-abort], [.text],,
3229 [AC_DEFINE(HAVE_AS_NO_MUL_BUG_ABORT_OPTION, 1,
3230 [Define if your assembler supports the -no-mul-bug-abort option.])])
3234 gcc_GAS_CHECK_FEATURE([.register], gcc_cv_as_sparc_register_op,,,
3235 [.register %g2, #scratch],,
3236 [AC_DEFINE(HAVE_AS_REGISTER_PSEUDO_OP, 1,
3237 [Define if your assembler supports .register.])])
3239 gcc_GAS_CHECK_FEATURE([-relax option], gcc_cv_as_sparc_relax,,
3241 [AC_DEFINE(HAVE_AS_RELAX_OPTION, 1,
3242 [Define if your assembler supports -relax option.])])
3244 gcc_GAS_CHECK_FEATURE([GOTDATA_OP relocs],
3245 gcc_cv_as_sparc_gotdata_op,,
3251 sethi %gdop_hix22(foo), %g1
3252 xor %g1, %gdop_lox10(foo), %g1
3253 ld [[%l7 + %g1]], %g2, %gdop(foo)],
3254 [if test x$gcc_cv_ld != x \
3255 && $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1; then
3256 if $gcc_cv_ld -v | grep GNU >/dev/null 2>&1; then
3257 if test x$gcc_cv_objdump != x; then
3258 if $gcc_cv_objdump -s -j .text conftest 2> /dev/null \
3259 | grep ' 03000004 82186004 c405c001'> /dev/null 2>&1; then
3260 gcc_cv_as_sparc_gotdata_op=no
3262 gcc_cv_as_sparc_gotdata_op=yes
3266 gcc_cv_as_sparc_gotdata_op=yes
3270 [AC_DEFINE(HAVE_AS_SPARC_GOTDATA_OP, 1,
3271 [Define if your assembler and linker support GOTDATA_OP relocs.])])
3273 gcc_GAS_CHECK_FEATURE([unaligned pcrel relocs],
3274 gcc_cv_as_sparc_ua_pcrel,,
3282 .uaword %r_disp32(foo)],
3283 [if test x$gcc_cv_ld != x \
3284 && $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1; then
3285 gcc_cv_as_sparc_ua_pcrel=yes
3288 [AC_DEFINE(HAVE_AS_SPARC_UA_PCREL, 1,
3289 [Define if your assembler and linker support unaligned PC relative relocs.])
3291 gcc_GAS_CHECK_FEATURE([unaligned pcrel relocs against hidden symbols],
3292 gcc_cv_as_sparc_ua_pcrel_hidden,,
3297 .uaword %r_disp32(foo)
3298 .byte 0x32, 0x33, 0x34
3303 [if test x$gcc_cv_ld != x && test x$gcc_cv_objdump != x \
3304 && $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1 \
3305 && $gcc_cv_objdump -s -j .data conftest 2> /dev/null \
3306 | grep ' 31000000 07323334' > /dev/null 2>&1; then
3307 if $gcc_cv_objdump -R conftest 2> /dev/null \
3308 | grep 'DISP32' > /dev/null 2>&1; then
3311 gcc_cv_as_sparc_ua_pcrel_hidden=yes
3315 [AC_DEFINE(HAVE_AS_SPARC_UA_PCREL_HIDDEN, 1,
3316 [Define if your assembler and linker support unaligned PC relative relocs against hidden symbols.])])
3317 ]) # unaligned pcrel relocs
3319 gcc_GAS_CHECK_FEATURE([offsetable %lo()],
3320 gcc_cv_as_sparc_offsetable_lo10,,
3323 or %g1, %lo(ab) + 12, %g1
3324 or %g1, %lo(ab + 12), %g1],
3325 [if test x$gcc_cv_objdump != x \
3326 && $gcc_cv_objdump -s -j .text conftest.o 2> /dev/null \
3327 | grep ' 82106000 82106000' > /dev/null 2>&1; then
3328 gcc_cv_as_sparc_offsetable_lo10=yes
3330 [AC_DEFINE(HAVE_AS_OFFSETABLE_LO10, 1,
3331 [Define if your assembler supports offsetable %lo().])])
3335 i[34567]86-*-* | x86_64-*-*)
3339 # Full C++ conformance when using a shared libstdc++-v3 requires some
3340 # support from the Cygwin DLL, which in more recent versions exports
3341 # wrappers to aid in interposing and redirecting operators new, delete,
3342 # etc., as per n2800 #17.6.4.6 [replacement.functions]. Check if we
3343 # are configuring for a version of Cygwin that exports the wrappers.
3344 if test x$host = x$target; then
3345 AC_CHECK_FUNC([__wrap__Znaj],[gcc_ac_cygwin_dll_wrappers=yes],[gcc_ac_cygwin_dll_wrappers=no])
3347 # Can't check presence of libc functions during cross-compile, so
3348 # we just have to assume we're building for an up-to-date target.
3349 gcc_ac_cygwin_dll_wrappers=yes
3351 AC_DEFINE_UNQUOTED(USE_CYGWIN_LIBSTDCXX_WRAPPERS,
3352 [`if test $gcc_ac_cygwin_dll_wrappers = yes; then echo 1; else echo 0; fi`],
3353 [Define if you want to generate code by default that assumes that the
3354 Cygwin DLL exports wrappers to support libstdc++ function replacement.])
3357 cygwin* | pe | mingw32*)
3358 # Recent binutils allows the three-operand form of ".comm" on PE. This
3359 # definition is used unconditionally to initialise the default state of
3360 # the target option variable that governs usage of the feature.
3361 gcc_GAS_CHECK_FEATURE([.comm with alignment], gcc_cv_as_comm_has_align,
3362 [2,19,52],,[.comm foo,1,32])
3363 AC_DEFINE_UNQUOTED(HAVE_GAS_ALIGNED_COMM,
3364 [`if test $gcc_cv_as_comm_has_align = yes; then echo 1; else echo 0; fi`],
3365 [Define if your assembler supports specifying the alignment
3366 of objects allocated using the GAS .comm command.])
3367 # Used for DWARF 2 in PE
3368 gcc_GAS_CHECK_FEATURE([.secrel32 relocs],
3369 gcc_cv_as_ix86_pe_secrel32,
3375 [if test x$gcc_cv_ld != x \
3376 && $gcc_cv_ld -o conftest conftest.o > /dev/null 2>&1; then
3377 gcc_cv_as_ix86_pe_secrel32=yes
3380 [AC_DEFINE(HAVE_GAS_PE_SECREL32_RELOC, 1,
3381 [Define if your assembler and linker support 32-bit section relative relocs via '.secrel32 label'.])])
3382 # Test if the assembler supports the extended form of the .section
3383 # directive that specifies section alignment. LTO support uses this,
3384 # but normally only after installation, so we warn but don't fail the
3385 # configure if LTO is enabled but the assembler does not support it.
3386 gcc_GAS_CHECK_FEATURE([.section with alignment], gcc_cv_as_section_has_align,
3387 [2,20,1],-fatal-warnings,[.section lto_test,"dr0"])
3388 if test x$gcc_cv_as_section_has_align != xyes; then
3389 case ",$enable_languages," in
3391 AC_MSG_WARN([LTO for $target requires binutils >= 2.20.1, but version found appears insufficient; LTO will not work until binutils is upgraded.])
3398 gcc_GAS_CHECK_FEATURE([filds and fists mnemonics],
3399 gcc_cv_as_ix86_filds,,,
3400 [filds mem; fists mem],,
3401 [AC_DEFINE(HAVE_AS_IX86_FILDS, 1,
3402 [Define if your assembler uses filds and fists mnemonics.])])
3404 gcc_GAS_CHECK_FEATURE([fildq and fistpq mnemonics],
3405 gcc_cv_as_ix86_fildq,,,
3406 [fildq mem; fistpq mem],,
3407 [AC_DEFINE(HAVE_AS_IX86_FILDQ, 1,
3408 [Define if your assembler uses fildq and fistq mnemonics.])])
3410 gcc_GAS_CHECK_FEATURE([cmov syntax],
3411 gcc_cv_as_ix86_cmov_sun_syntax,,,
3412 [cmovl.l %edx, %eax],,
3413 [AC_DEFINE(HAVE_AS_IX86_CMOV_SUN_SYNTAX, 1,
3414 [Define if your assembler supports the Sun syntax for cmov.])])
3416 gcc_GAS_CHECK_FEATURE([ffreep mnemonic],
3417 gcc_cv_as_ix86_ffreep,,,
3419 [AC_DEFINE(HAVE_AS_IX86_FFREEP, 1,
3420 [Define if your assembler supports the ffreep mnemonic.])])
3422 gcc_GAS_CHECK_FEATURE([.quad directive],
3423 gcc_cv_as_ix86_quad,,,
3425 [AC_DEFINE(HAVE_AS_IX86_QUAD, 1,
3426 [Define if your assembler supports the .quad directive.])])
3428 gcc_GAS_CHECK_FEATURE([sahf mnemonic],
3429 gcc_cv_as_ix86_sahf,,,
3432 [AC_DEFINE(HAVE_AS_IX86_SAHF, 1,
3433 [Define if your assembler supports the sahf mnemonic in 64bit mode.])])
3435 gcc_GAS_CHECK_FEATURE([swap suffix],
3436 gcc_cv_as_ix86_swap,,,
3437 [movl.s %esp, %ebp],,
3438 [AC_DEFINE(HAVE_AS_IX86_SWAP, 1,
3439 [Define if your assembler supports the swap suffix.])])
3441 gcc_GAS_CHECK_FEATURE([different section symbol subtraction],
3442 gcc_cv_as_ix86_diff_sect_delta,,,
3450 [AC_DEFINE(HAVE_AS_IX86_DIFF_SECT_DELTA, 1,
3451 [Define if your assembler supports the subtraction of symbols in different sections.])])
3453 # These two are used unconditionally by i386.[ch]; it is to be defined
3454 # to 1 if the feature is present, 0 otherwise.
3455 gcc_GAS_CHECK_FEATURE([GOTOFF in data],
3456 gcc_cv_as_ix86_gotoff_in_data, [2,11,0],,
3462 AC_DEFINE_UNQUOTED(HAVE_AS_GOTOFF_IN_DATA,
3463 [`if test $gcc_cv_as_ix86_gotoff_in_data = yes; then echo 1; else echo 0; fi`],
3464 [Define true if the assembler supports '.long foo@GOTOFF'.])
3466 gcc_GAS_CHECK_FEATURE([rep and lock prefix],
3467 gcc_cv_as_ix86_rep_lock_prefix,,,
3469 lock addl %edi, (%eax,%esi)
3470 lock orl $0, (%esp)],,
3471 [AC_DEFINE(HAVE_AS_IX86_REP_LOCK_PREFIX, 1,
3472 [Define if the assembler supports 'rep <insn>, lock <insn>'.])])
3477 gcc_GAS_CHECK_FEATURE([ltoffx and ldxmov relocs],
3478 gcc_cv_as_ia64_ltoffx_ldxmov_relocs, [2,14,0],,
3480 addl r15 = @ltoffx(x#), gp
3482 ld8.mov r16 = [[r15]], x#],,
3483 [AC_DEFINE(HAVE_AS_LTOFFX_LDXMOV_RELOCS, 1,
3484 [Define if your assembler supports ltoffx and ldxmov relocations.])])
3490 *-*-aix*) conftest_s=' .machine "pwr5"
3494 gcc_GAS_CHECK_FEATURE([.machine directive support],
3495 gcc_cv_as_machine_directive,,,
3496 [ .machine ppc7400])
3497 if test x$gcc_cv_as_machine_directive != xyes; then
3498 echo "*** This target requires an assembler supporting \".machine\"" >&2
3499 echo you can get it from: ftp://gcc.gnu.org/pub/gcc/infrastructure/cctools-528.5.dmg >&2
3500 test x$build = x$target && exit 1
3504 *) conftest_s=' .machine power4
3509 gcc_GAS_CHECK_FEATURE([mfcr field support],
3510 gcc_cv_as_powerpc_mfcrf, [2,14,0],,
3512 [AC_DEFINE(HAVE_AS_MFCRF, 1,
3513 [Define if your assembler supports mfcr field.])])
3516 *-*-aix*) conftest_s=' .machine "pwr5"
3519 *) conftest_s=' .machine power5
3524 gcc_GAS_CHECK_FEATURE([popcntb support],
3525 gcc_cv_as_powerpc_popcntb, [2,17,0],,
3527 [AC_DEFINE(HAVE_AS_POPCNTB, 1,
3528 [Define if your assembler supports popcntb field.])])
3531 *-*-aix*) conftest_s=' .machine "pwr5x"
3534 *) conftest_s=' .machine power5
3539 gcc_GAS_CHECK_FEATURE([fp round support],
3540 gcc_cv_as_powerpc_fprnd, [2,17,0],,
3542 [AC_DEFINE(HAVE_AS_FPRND, 1,
3543 [Define if your assembler supports fprnd.])])
3546 *-*-aix*) conftest_s=' .machine "pwr6"
3549 *) conftest_s=' .machine power6
3554 gcc_GAS_CHECK_FEATURE([move fp gpr support],
3555 gcc_cv_as_powerpc_mfpgpr, [2,19,2],,
3557 [AC_DEFINE(HAVE_AS_MFPGPR, 1,
3558 [Define if your assembler supports mffgpr and mftgpr.])])
3561 *-*-aix*) conftest_s=' .csect .text[[PR]]
3563 addis 11,30,_GLOBAL_OFFSET_TABLE_-LCF..0@ha';;
3567 addis r11,r30,_GLOBAL_OFFSET_TABLE_-LCF0@ha';;
3568 *) conftest_s=' .text
3570 addis 11,30,_GLOBAL_OFFSET_TABLE_-.LCF0@ha';;
3573 gcc_GAS_CHECK_FEATURE([rel16 relocs],
3574 gcc_cv_as_powerpc_rel16, [2,17,0], -a32,
3576 [AC_DEFINE(HAVE_AS_REL16, 1,
3577 [Define if your assembler supports R_PPC_REL16 relocs.])])
3580 *-*-aix*) conftest_s=' .machine "pwr6"
3583 *) conftest_s=' .machine power6
3588 gcc_GAS_CHECK_FEATURE([compare bytes support],
3589 gcc_cv_as_powerpc_cmpb, [2,19,2], -a32,
3591 [AC_DEFINE(HAVE_AS_CMPB, 1,
3592 [Define if your assembler supports cmpb.])])
3595 *-*-aix*) conftest_s=' .machine "pwr6"
3598 *) conftest_s=' .machine power6
3603 gcc_GAS_CHECK_FEATURE([decimal float support],
3604 gcc_cv_as_powerpc_dfp, [2,19,2], -a32,
3606 [AC_DEFINE(HAVE_AS_DFP, 1,
3607 [Define if your assembler supports DFP instructions.])])
3610 *-*-aix*) conftest_s=' .machine "pwr7"
3613 *) conftest_s=' .machine power7
3618 gcc_GAS_CHECK_FEATURE([vector-scalar support],
3619 gcc_cv_as_powerpc_vsx, [2,19,2], -a32,
3621 [AC_DEFINE(HAVE_AS_VSX, 1,
3622 [Define if your assembler supports VSX instructions.])])
3625 *-*-aix*) conftest_s=' .machine "pwr7"
3628 *) conftest_s=' .machine power7
3633 gcc_GAS_CHECK_FEATURE([popcntd support],
3634 gcc_cv_as_powerpc_popcntd, [2,19,2], -a32,
3636 [AC_DEFINE(HAVE_AS_POPCNTD, 1,
3637 [Define if your assembler supports POPCNTD instructions.])])
3640 *-*-aix*) conftest_s=' .csect .text[[PR]]
3642 *) conftest_s=' .text
3646 gcc_GAS_CHECK_FEATURE([lwsync support],
3647 gcc_cv_as_powerpc_lwsync, [2,19,2], -a32,
3649 [AC_DEFINE(HAVE_AS_LWSYNC, 1,
3650 [Define if your assembler supports LWSYNC instructions.])])
3653 *-*-aix*) conftest_s=' .machine "476"
3656 *) conftest_s=' .machine "476"
3661 gcc_GAS_CHECK_FEATURE([data cache invalidate support],
3662 gcc_cv_as_powerpc_dci, [9,99,0], -a32,
3664 [AC_DEFINE(HAVE_AS_DCI, 1,
3665 [Define if your assembler supports the DCI/ICI instructions.])])
3667 gcc_GAS_CHECK_FEATURE([.gnu_attribute support],
3668 gcc_cv_as_powerpc_gnu_attribute, [2,18,0],,
3669 [.gnu_attribute 4,1],,
3670 [AC_DEFINE(HAVE_AS_GNU_ATTRIBUTE, 1,
3671 [Define if your assembler supports .gnu_attribute.])])
3673 gcc_GAS_CHECK_FEATURE([tls marker support],
3674 gcc_cv_as_powerpc_tls_markers, [2,20,0],,
3675 [ bl __tls_get_addr(x@tlsgd)],,
3676 [AC_DEFINE(HAVE_AS_TLS_MARKERS, 1,
3677 [Define if your assembler supports arg info for __tls_get_addr.])])
3681 gcc_GAS_CHECK_FEATURE([.ref support],
3682 gcc_cv_as_aix_ref, [2.21.0],,
3683 [ .csect stuff[[rw]]
3689 [AC_DEFINE(HAVE_AS_REF, 1,
3690 [Define if your assembler supports .ref])])
3696 gcc_GAS_CHECK_FEATURE([explicit relocation support],
3697 gcc_cv_as_mips_explicit_relocs, [2,14,0],,
3698 [ lw $4,%gp_rel(foo)($4)],,
3699 [if test x$target_cpu_default = x
3700 then target_cpu_default=MASK_EXPLICIT_RELOCS
3701 else target_cpu_default="($target_cpu_default)|MASK_EXPLICIT_RELOCS"
3703 gcc_GAS_CHECK_FEATURE([-mno-shared support],
3704 gcc_cv_as_mips_no_shared, [2,16,0], [-mno-shared], [nop],,
3705 [AC_DEFINE(HAVE_AS_NO_SHARED, 1,
3706 [Define if the assembler understands -mno-shared.])])
3708 gcc_GAS_CHECK_FEATURE([.gnu_attribute support],
3709 gcc_cv_as_mips_gnu_attribute, [2,18,0],,
3710 [.gnu_attribute 4,1],,
3711 [AC_DEFINE(HAVE_AS_GNU_ATTRIBUTE, 1,
3712 [Define if your assembler supports .gnu_attribute.])])
3714 gcc_GAS_CHECK_FEATURE([.dtprelword support],
3715 gcc_cv_as_mips_dtprelword, [2,18,0],,
3716 [.section .tdata,"awT",@progbits
3720 .dtprelword x+0x8000],,
3721 [AC_DEFINE(HAVE_AS_DTPRELWORD, 1,
3722 [Define if your assembler supports .dtprelword.])])
3724 gcc_GAS_CHECK_FEATURE([DSPR1 mult with four accumulators support],
3725 gcc_cv_as_mips_dspr1_mult,,,
3735 [AC_DEFINE(HAVE_AS_DSPR1_MULT, 1,
3736 [Define if your assembler supports DSPR1 mult.])])
3738 AC_MSG_CHECKING(assembler and linker for explicit JALR relocation)
3739 gcc_cv_as_ld_jalr_reloc=no
3740 if test $gcc_cv_as_mips_explicit_relocs = yes; then
3741 if test $in_tree_ld = yes ; then
3742 if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 20 -o "$gcc_cv_gld_major_version" -gt 2 \
3743 && test $in_tree_ld_is_elf = yes; then
3744 gcc_cv_as_ld_jalr_reloc=yes
3746 elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x -a x$gcc_cv_objdump != x; then
3747 echo ' .ent x' > conftest.s
3748 echo 'x: ld $2,%got_disp(y)($3)' >> conftest.s
3749 echo ' ld $25,%call16(y)($28)' >> conftest.s
3750 echo ' .reloc 1f,R_MIPS_JALR,y' >> conftest.s
3751 echo '1: jalr $25' >> conftest.s
3752 echo ' .reloc 1f,R_MIPS_JALR,x' >> conftest.s
3753 echo '1: jalr $25' >> conftest.s
3754 echo ' .end x' >> conftest.s
3755 if $gcc_cv_as -o conftest.o conftest.s >/dev/null 2>&AS_MESSAGE_LOG_FD \
3756 && $gcc_cv_ld -shared -o conftest.so conftest.o >/dev/null 2>&AS_MESSAGE_LOG_FD; then
3757 if $gcc_cv_objdump -d conftest.so | grep jalr >/dev/null 2>&1 \
3758 && $gcc_cv_objdump -d conftest.so | grep "bal.*<x>" >/dev/null 2>&1; then
3759 gcc_cv_as_ld_jalr_reloc=yes
3765 if test $gcc_cv_as_ld_jalr_reloc = yes; then
3766 if test x$target_cpu_default = x; then
3767 target_cpu_default=MASK_RELAX_PIC_CALLS
3769 target_cpu_default="($target_cpu_default)|MASK_RELAX_PIC_CALLS"
3772 AC_MSG_RESULT($gcc_cv_as_ld_jalr_reloc)
3774 AC_CACHE_CHECK([linker for .eh_frame personality relaxation],
3775 [gcc_cv_ld_mips_personality_relaxation],
3776 [gcc_cv_ld_mips_personality_relaxation=no
3777 if test $in_tree_ld = yes ; then
3778 if test "$gcc_cv_gld_major_version" -eq 2 \
3779 -a "$gcc_cv_gld_minor_version" -ge 21 \
3780 -o "$gcc_cv_gld_major_version" -gt 2; then
3781 gcc_cv_ld_mips_personality_relaxation=yes
3783 elif test x$gcc_cv_as != x \
3784 -a x$gcc_cv_ld != x \
3785 -a x$gcc_cv_readelf != x ; then
3786 cat > conftest.s <<EOF
3788 .cfi_personality 0x80,indirect_ptr
3795 .section .data,"aw",@progbits
3799 if $gcc_cv_as -KPIC -o conftest.o conftest.s > /dev/null 2>&1 \
3800 && $gcc_cv_ld -o conftest conftest.o -shared > /dev/null 2>&1; then
3801 if $gcc_cv_readelf -d conftest 2>&1 \
3802 | grep TEXTREL > /dev/null 2>&1; then
3804 elif $gcc_cv_readelf --relocs conftest 2>&1 \
3805 | grep 'R_MIPS_REL32 *$' > /dev/null 2>&1; then
3808 gcc_cv_ld_mips_personality_relaxation=yes
3812 rm -f conftest.s conftest.o conftest])
3813 if test x$gcc_cv_ld_mips_personality_relaxation = xyes; then
3814 AC_DEFINE(HAVE_LD_PERSONALITY_RELAXATION, 1,
3815 [Define if your linker can relax absolute .eh_frame personality
3816 pointers into PC-relative form.])
3821 # Mips and HP-UX need the GNU assembler.
3822 # Linux on IA64 might be able to use the Intel assembler.
3825 mips*-*-* | *-*-hpux* )
3826 if test x$gas_flag = xyes \
3827 || test x"$host" != x"$build" \
3828 || test ! -x "$gcc_cv_as" \
3829 || "$gcc_cv_as" -v < /dev/null 2>&1 | grep GNU > /dev/null; then
3832 echo "*** This configuration requires the GNU assembler" >&2
3838 # ??? Not all targets support dwarf2 debug_line, even within a version
3839 # of gas. Moreover, we need to emit a valid instruction to trigger any
3840 # info to the output file. So, as supported targets are added to gas 2.11,
3841 # add some instruction here to (also) show we expect this might work.
3842 # ??? Once 2.11 is released, probably need to add first known working
3843 # version to the per-target configury.
3845 alpha | arm | avr | bfin | cris | i386 | m32c | m68k | microblaze | mips \
3846 | pa | rs6000 | score | sparc | spu | xstormy16 | xtensa)
3856 if test x"$insn" != x; then
3858 .file 1 \"conftest.s\"
3861 gcc_GAS_CHECK_FEATURE([dwarf2 debug_line support],
3862 gcc_cv_as_dwarf2_debug_line,
3863 [elf,2,11,0],, [$conftest_s],
3864 [if test x$gcc_cv_objdump != x \
3865 && $gcc_cv_objdump -h conftest.o 2> /dev/null \
3866 | grep debug_line > /dev/null 2>&1; then
3867 gcc_cv_as_dwarf2_debug_line=yes
3870 # The .debug_line file table must be in the exact order that
3871 # we specified the files, since these indices are also used
3872 # by DW_AT_decl_file. Approximate this test by testing if
3873 # the assembler bitches if the same index is assigned twice.
3874 gcc_GAS_CHECK_FEATURE([buggy dwarf2 .file directive],
3875 gcc_cv_as_dwarf2_file_buggy,,,
3879 if test $gcc_cv_as_dwarf2_debug_line = yes \
3880 && test $gcc_cv_as_dwarf2_file_buggy = no; then
3881 AC_DEFINE(HAVE_AS_DWARF2_DEBUG_LINE, 1,
3882 [Define if your assembler supports dwarf2 .file/.loc directives,
3883 and preserves file table indices exactly as given.])
3886 gcc_GAS_CHECK_FEATURE([--gdwarf2 option],
3887 gcc_cv_as_gdwarf2_flag,
3888 [elf,2,11,0], [--gdwarf2], [$insn],,
3889 [AC_DEFINE(HAVE_AS_GDWARF2_DEBUG_FLAG, 1,
3890 [Define if your assembler supports the --gdwarf2 option.])])
3892 gcc_GAS_CHECK_FEATURE([--gstabs option],
3893 gcc_cv_as_gstabs_flag,
3894 [elf,2,11,0], [--gstabs], [$insn],
3895 [# The native Solaris 9/Intel assembler doesn't understand --gstabs
3896 # and warns about it, but still exits successfully. So check for
3898 if AC_TRY_COMMAND([$gcc_cv_as --gstabs -o conftest.o conftest.s 2>&1 | grep -i warning > /dev/null])
3900 else gcc_cv_as_gstabs_flag=yes
3902 [AC_DEFINE(HAVE_AS_GSTABS_DEBUG_FLAG, 1,
3903 [Define if your assembler supports the --gstabs option.])])
3905 gcc_GAS_CHECK_FEATURE([--debug-prefix-map option],
3906 gcc_cv_as_debug_prefix_map_flag,
3907 [2,18,0], [--debug-prefix-map /a=/b], [$insn],,
3908 [AC_DEFINE(HAVE_AS_DEBUG_PREFIX_MAP, 1,
3909 [Define if your assembler supports the --debug-prefix-map option.])])
3912 gcc_GAS_CHECK_FEATURE([.lcomm with alignment], gcc_cv_as_lcomm_with_alignment,
3915 [AC_DEFINE(HAVE_GAS_LCOMM_WITH_ALIGNMENT, 1,
3916 [Define if your assembler supports .lcomm with an alignment field.])])
3918 AC_ARG_ENABLE(gnu-unique-object,
3919 [AS_HELP_STRING([--enable-gnu-unique-object],
3920 [enable the use of the @gnu_unique_object ELF extension on glibc systems])],
3921 [case $enable_gnu_unique_object in
3923 *) AC_MSG_ERROR(['$enable_gnu_unique_object' is an invalid value for --enable-gnu-unique-object.
3924 Valid choices are 'yes' and 'no'.]) ;;
3926 [gcc_GAS_CHECK_FEATURE([gnu_unique_object], gcc_cv_as_gnu_unique_object,
3928 [.type foo, @gnu_unique_object],,
3929 # Also check for ld.so support, i.e. glibc 2.11 or higher.
3930 [[if test x$host = x$build -a x$host = x$target &&
3931 ldd --version 2>/dev/null &&
3932 glibcver=`ldd --version 2>/dev/null | sed 's/.* //;q'`; then
3933 glibcmajor=`expr "$glibcver" : "\([0-9]*\)"`
3934 glibcminor=`expr "$glibcver" : "[2-9]*\.\([0-9]*\)"`
3935 glibcnum=`expr $glibcmajor \* 1000 + $glibcminor`
3936 if test "$glibcnum" -ge 2011 ; then
3937 enable_gnu_unique_object=yes
3940 if test x$enable_gnu_unique_object = xyes; then
3941 AC_DEFINE(HAVE_GAS_GNU_UNIQUE_OBJECT, 1,
3942 [Define if your assembler supports @gnu_unique_object.])
3945 AC_CACHE_CHECK([assembler for tolerance to line number 0],
3946 [gcc_cv_as_line_zero],
3947 [gcc_cv_as_line_zero=no
3948 if test $in_tree_gas = yes; then
3949 gcc_GAS_VERSION_GTE_IFELSE(2, 16, 91, [gcc_cv_as_line_zero=yes])
3950 elif test "x$gcc_cv_as" != x; then
3951 { echo '# 1 "test.s" 1'; echo '# 0 "" 2'; } > conftest.s
3952 if AC_TRY_COMMAND([$gcc_cv_as -o conftest.o conftest.s >&AS_MESSAGE_LOG_FD 2>conftest.out]) &&
3953 test "x`cat conftest.out`" = x
3955 gcc_cv_as_line_zero=yes
3957 echo "configure: failed program was" >&AS_MESSAGE_LOG_FD
3958 cat conftest.s >&AS_MESSAGE_LOG_FD
3959 echo "configure: error output was" >&AS_MESSAGE_LOG_FD
3960 cat conftest.out >&AS_MESSAGE_LOG_FD
3962 rm -f conftest.o conftest.s conftest.out
3964 if test "x$gcc_cv_as_line_zero" = xyes; then
3965 AC_DEFINE([HAVE_AS_LINE_ZERO], 1,
3966 [Define if the assembler won't complain about a line such as # 0 "" 2.])
3969 AC_MSG_CHECKING(linker PT_GNU_EH_FRAME support)
3970 gcc_cv_ld_eh_frame_hdr=no
3971 if test $in_tree_ld = yes ; then
3972 if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 12 -o "$gcc_cv_gld_major_version" -gt 2 \
3973 && test $in_tree_ld_is_elf = yes; then
3974 gcc_cv_ld_eh_frame_hdr=yes
3976 elif test x$gcc_cv_ld != x; then
3977 if echo "$ld_ver" | grep GNU > /dev/null; then
3978 # Check if linker supports --eh-frame-hdr option
3979 if $gcc_cv_ld --help 2>/dev/null | grep eh-frame-hdr > /dev/null; then
3980 gcc_cv_ld_eh_frame_hdr=yes
3985 # Sun ld has various bugs in .eh_frame_hdr support before version 1.2251.
3986 if test "$ld_vers_major" -gt 1 || test "$ld_vers_minor" -ge 2251; then
3987 gcc_cv_ld_eh_frame_hdr=yes
3993 GCC_TARGET_TEMPLATE([HAVE_LD_EH_FRAME_HDR])
3994 if test x"$gcc_cv_ld_eh_frame_hdr" = xyes; then
3995 AC_DEFINE(HAVE_LD_EH_FRAME_HDR, 1,
3996 [Define if your linker supports .eh_frame_hdr.])
3998 AC_MSG_RESULT($gcc_cv_ld_eh_frame_hdr)
4000 AC_MSG_CHECKING(linker position independent executable support)
4002 if test $in_tree_ld = yes ; then
4003 if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 15 -o "$gcc_cv_gld_major_version" -gt 2 \
4004 && test $in_tree_ld_is_elf = yes; then
4007 elif test x$gcc_cv_ld != x; then
4008 # Check if linker supports -pie option
4009 if $gcc_cv_ld --help 2>/dev/null | grep -- -pie > /dev/null; then
4013 if test x"$gcc_cv_ld_pie" = xyes; then
4014 AC_DEFINE(HAVE_LD_PIE, 1,
4015 [Define if your linker supports -pie option.])
4017 AC_MSG_RESULT($gcc_cv_ld_pie)
4019 AC_MSG_CHECKING(linker EH-compatible garbage collection of sections)
4020 gcc_cv_ld_eh_gc_sections=no
4021 if test $in_tree_ld = yes ; then
4022 if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 17 -o "$gcc_cv_gld_major_version" -gt 2 \
4023 && test $in_tree_ld_is_elf = yes; then
4024 gcc_cv_ld_eh_gc_sections=yes
4026 elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x -a x$gcc_cv_objdump != x ; then
4027 cat > conftest.s <<EOF
4030 .type _start, @function
4033 .size _start, .-_start
4034 .section .text.foo,"ax",@progbits
4035 .type foo, @function
4039 .section .gcc_except_table.foo,"a",@progbits
4042 .section .eh_frame,"a",@progbits
4045 if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
4046 if $gcc_cv_ld -o conftest conftest.o --entry=_start --gc-sections 2>&1 \
4047 | grep "gc-sections option ignored" > /dev/null; then
4048 gcc_cv_ld_eh_gc_sections=no
4049 elif $gcc_cv_objdump -h conftest 2> /dev/null \
4050 | grep gcc_except_table > /dev/null; then
4051 gcc_cv_ld_eh_gc_sections=yes
4052 # If no COMDAT groups, the compiler will emit .gnu.linkonce.t. sections.
4053 if test x$gcc_cv_as_comdat_group != xyes; then
4054 gcc_cv_ld_eh_gc_sections=no
4055 cat > conftest.s <<EOF
4058 .type _start, @function
4061 .size _start, .-_start
4062 .section .gnu.linkonce.t.foo,"ax",@progbits
4063 .type foo, @function
4067 .section .gcc_except_table.foo,"a",@progbits
4070 .section .eh_frame,"a",@progbits
4073 if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
4074 if $gcc_cv_ld -o conftest conftest.o --entry=_start --gc-sections 2>&1 \
4075 | grep "gc-sections option ignored" > /dev/null; then
4076 gcc_cv_ld_eh_gc_sections=no
4077 elif $gcc_cv_objdump -h conftest 2> /dev/null \
4078 | grep gcc_except_table > /dev/null; then
4079 gcc_cv_ld_eh_gc_sections=yes
4085 rm -f conftest.s conftest.o conftest
4089 # ??? This apparently exposes a binutils bug with PC-relative relocations.
4090 gcc_cv_ld_eh_gc_sections=no
4093 if test x$gcc_cv_ld_eh_gc_sections = xyes; then
4094 AC_DEFINE(HAVE_LD_EH_GC_SECTIONS, 1,
4095 [Define if your linker supports garbage collection of
4096 sections in presence of EH frames.])
4098 AC_MSG_RESULT($gcc_cv_ld_eh_gc_sections)
4104 AC_CACHE_CHECK(linker --as-needed support,
4105 gcc_cv_ld_as_needed,
4106 [gcc_cv_ld_as_needed=no
4107 if test $in_tree_ld = yes ; then
4108 if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 16 -o "$gcc_cv_gld_major_version" -gt 2 \
4109 && test $in_tree_ld_is_elf = yes; then
4110 gcc_cv_ld_as_needed=yes
4112 elif test x$gcc_cv_ld != x; then
4113 # Check if linker supports --as-needed and --no-as-needed options
4114 if $gcc_cv_ld --help 2>/dev/null | grep as-needed > /dev/null; then
4115 gcc_cv_ld_as_needed=yes
4119 if test x"$gcc_cv_ld_as_needed" = xyes; then
4120 AC_DEFINE(HAVE_LD_AS_NEEDED, 1,
4121 [Define if your linker supports --as-needed and --no-as-needed options.])
4124 case "$target:$tm_file" in
4125 powerpc64*-*-linux* | powerpc*-*-linux*rs6000/biarch64.h*)
4126 AC_CACHE_CHECK(linker support for omitting dot symbols,
4127 gcc_cv_ld_no_dot_syms,
4128 [gcc_cv_ld_no_dot_syms=no
4129 if test $in_tree_ld = yes ; then
4130 if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 16 -o "$gcc_cv_gld_major_version" -gt 2; then
4131 gcc_cv_ld_no_dot_syms=yes
4133 elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x ; then
4134 cat > conftest1.s <<EOF
4138 cat > conftest2.s <<EOF
4139 .section ".opd","aw"
4144 .quad .LEfoo,.TOC.@tocbase,0
4150 if $gcc_cv_as -a64 -o conftest1.o conftest1.s > /dev/null 2>&1 \
4151 && $gcc_cv_as -a64 -o conftest2.o conftest2.s > /dev/null 2>&1 \
4152 && $gcc_cv_ld -melf64ppc -o conftest conftest1.o conftest2.o > /dev/null 2>&1; then
4153 gcc_cv_ld_no_dot_syms=yes
4155 rm -f conftest conftest1.o conftest2.o conftest1.s conftest2.s
4158 if test x"$gcc_cv_ld_no_dot_syms" = xyes; then
4159 AC_DEFINE(HAVE_LD_NO_DOT_SYMS, 1,
4160 [Define if your PowerPC64 linker only needs function descriptor syms.])
4163 AC_CACHE_CHECK(linker large toc support,
4164 gcc_cv_ld_large_toc,
4165 [gcc_cv_ld_large_toc=no
4166 if test $in_tree_ld = yes ; then
4167 if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 21 -o "$gcc_cv_gld_major_version" -gt 2; then
4168 gcc_cv_ld_large_toc=yes
4170 elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x ; then
4171 cat > conftest.s <<EOF
4172 .section ".tbss","awT",@nobits
4178 addis 9,13,ie0@got@tprel@ha
4179 ld 9,ie0@got@tprel@l(9)
4181 if $gcc_cv_as -a64 -o conftest.o conftest.s > /dev/null 2>&1 \
4182 && $gcc_cv_ld -melf64ppc --no-toc-sort -o conftest conftest.o > /dev/null 2>&1; then
4183 gcc_cv_ld_large_toc=yes
4185 rm -f conftest conftest.o conftest.s
4188 if test x"$gcc_cv_ld_large_toc" = xyes; then
4189 AC_DEFINE(HAVE_LD_LARGE_TOC, 1,
4190 [Define if your PowerPC64 linker supports a large TOC.])
4195 AC_CACHE_CHECK(linker --build-id support,
4197 [gcc_cv_ld_buildid=no
4198 if test $in_tree_ld = yes ; then
4199 if test "$gcc_cv_gld_major_version" -eq 2 -a \
4200 "$gcc_cv_gld_minor_version" -ge 18 -o \
4201 "$gcc_cv_gld_major_version" -gt 2 \
4202 && test $in_tree_ld_is_elf = yes; then
4203 gcc_cv_ld_buildid=yes
4205 elif test x$gcc_cv_ld != x; then
4206 if $gcc_cv_ld --help 2>/dev/null | grep build-id > /dev/null; then
4207 gcc_cv_ld_buildid=yes
4210 if test x"$gcc_cv_ld_buildid" = xyes; then
4211 AC_DEFINE(HAVE_LD_BUILDID, 1,
4212 [Define if your linker supports --build-id.])
4215 AC_ARG_ENABLE(linker-build-id,
4216 [ --enable-linker-build-id
4217 compiler will always pass --build-id to linker],
4219 enable_linker_build_id=no)
4221 if test x"$enable_linker_build_id" = xyes; then
4222 if test x"$gcc_cv_ld_buildid" = xyes; then
4223 AC_DEFINE(ENABLE_LD_BUILDID, 1,
4224 [Define if gcc should always pass --build-id to linker.])
4226 AC_MSG_WARN(--build-id is not supported by your linker; --enable-linker-build-id ignored)
4230 # In binutils 2.21, GNU ld gained support for new emulations fully
4231 # supporting the Solaris 2 ABI. Detect their presence in the linker used.
4232 AC_CACHE_CHECK(linker *_sol2 emulation support,
4233 gcc_cv_ld_sol2_emulation,
4234 [gcc_cv_ld_sol2_emulation=no
4235 if test $in_tree_ld = yes ; then
4236 if test "$gcc_cv_gld_major_version" -eq 2 -a \
4237 "$gcc_cv_gld_minor_version" -ge 21 -o \
4238 "$gcc_cv_gld_major_version" -gt 2 \
4239 && test $in_tree_ld_is_elf = yes; then
4240 gcc_cv_ld_sol2_emulation=yes
4242 elif test x$gcc_cv_ld != x; then
4243 if $gcc_cv_ld -V 2>/dev/null | sed -e '1,/Supported emulations/d;q' | \
4244 grep _sol2 > /dev/null; then
4245 gcc_cv_ld_sol2_emulation=yes
4248 if test x"$gcc_cv_ld_sol2_emulation" = xyes; then
4249 AC_DEFINE(HAVE_LD_SOL2_EMULATION, 1,
4250 [Define if your linker supports the *_sol2 emulations.])
4253 AC_CACHE_CHECK(linker --sysroot support,
4255 [gcc_cv_ld_sysroot=no
4256 if test $in_tree_ld = yes ; then
4257 if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 16 -o "$gcc_cv_gld_major_version" -gt 2 ; then
4258 gcc_cv_ld_sysroot=yes
4260 elif test x$gcc_cv_ld != x; then
4261 if $gcc_cv_ld --help 2>/dev/null | grep sysroot > /dev/null; then
4262 gcc_cv_ld_sysroot=yes
4265 if test x"$gcc_cv_ld_sysroot" = xyes; then
4266 AC_DEFINE(HAVE_LD_SYSROOT, 1,
4267 [Define if your linker supports --sysroot.])
4270 if test x$with_sysroot = x && test x$host = x$target \
4271 && test "$prefix" != "/usr" && test "x$prefix" != "x$local_prefix" \
4272 && test "$prefix" != "NONE"; then
4273 AC_DEFINE_UNQUOTED(PREFIX_INCLUDE_DIR, "$prefix/include",
4274 [Define to PREFIX/include if cpp should also search that directory.])
4277 if test x$host != x$target || test "x$TARGET_SYSTEM_ROOT" != x; then
4278 if test "x$with_headers" != x; then
4279 target_header_dir=$with_headers
4280 elif test "x$with_sysroot" = x; then
4281 target_header_dir="${exec_prefix}/${target_noncanonical}/sys-include"
4282 elif test "x$with_build_sysroot" != "x"; then
4283 target_header_dir="${with_build_sysroot}/usr/include"
4284 elif test "x$with_sysroot" = xyes; then
4285 target_header_dir="${exec_prefix}/${target_noncanonical}/sys-root/usr/include"
4287 target_header_dir="${with_sysroot}/usr/include"
4290 target_header_dir=/usr/include
4293 # Test for stack protector support in target C library.
4294 AC_CACHE_CHECK(__stack_chk_fail in target C library,
4295 gcc_cv_libc_provides_ssp,
4296 [gcc_cv_libc_provides_ssp=no
4298 *-*-linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
4299 [# glibc 2.4 and later provides __stack_chk_fail and
4300 # either __stack_chk_guard, or TLS access to stack guard canary.
4301 if test -f $target_header_dir/features.h \
4302 && $EGREP '^[ ]*#[ ]*define[ ]+__GNU_LIBRARY__[ ]+([1-9][0-9]|[6-9])' \
4303 $target_header_dir/features.h > /dev/null; then
4304 if $EGREP '^[ ]*#[ ]*define[ ]+__GLIBC__[ ]+([1-9][0-9]|[3-9])' \
4305 $target_header_dir/features.h > /dev/null; then
4306 gcc_cv_libc_provides_ssp=yes
4307 elif $EGREP '^[ ]*#[ ]*define[ ]+__GLIBC__[ ]+2' \
4308 $target_header_dir/features.h > /dev/null \
4309 && $EGREP '^[ ]*#[ ]*define[ ]+__GLIBC_MINOR__[ ]+([1-9][0-9]|[4-9])' \
4310 $target_header_dir/features.h > /dev/null; then
4311 gcc_cv_libc_provides_ssp=yes
4312 elif $EGREP '^[ ]*#[ ]*define[ ]+__UCLIBC__[ ]+1' \
4313 $target_header_dir/features.h > /dev/null && \
4314 test -f $target_header_dir/bits/uClibc_config.h && \
4315 $EGREP '^[ ]*#[ ]*define[ ]+__UCLIBC_HAS_SSP__[ ]+1' \
4316 $target_header_dir/bits/uClibc_config.h > /dev/null; then
4317 gcc_cv_libc_provides_ssp=yes
4322 # Avoid complicated tests (see
4323 # <http://gcc.gnu.org/ml/gcc/2008-10/msg00130.html>) and for now
4324 # simply assert that glibc does provide this, which is true for all
4325 # realistically usable GNU/Hurd configurations.
4326 gcc_cv_libc_provides_ssp=yes;;
4327 *-*-darwin* | *-*-freebsd*)
4328 AC_CHECK_FUNC(__stack_chk_fail,[gcc_cv_libc_provides_ssp=yes],
4329 [echo "no __stack_chk_fail on this target"])
4331 *) gcc_cv_libc_provides_ssp=no ;;
4334 if test x$gcc_cv_libc_provides_ssp = xyes; then
4335 AC_DEFINE(TARGET_LIBC_PROVIDES_SSP, 1,
4336 [Define if your target C library provides stack protector support])
4339 # Check if TFmode long double should be used by default or not.
4340 # Some glibc targets used DFmode long double, but with glibc 2.4
4341 # and later they can use TFmode.
4343 powerpc*-*-linux* | \
4348 AC_ARG_WITH(long-double-128,
4349 [ --with-long-double-128 Use 128-bit long double by default.],
4350 gcc_cv_target_ldbl128="$with_long_double_128",
4351 [[gcc_cv_target_ldbl128=no
4352 grep '^[ ]*#[ ]*define[ ][ ]*__LONG_DOUBLE_MATH_OPTIONAL' \
4353 $target_header_dir/bits/wordsize.h > /dev/null 2>&1 \
4354 && gcc_cv_target_ldbl128=yes
4358 if test x$gcc_cv_target_ldbl128 = xyes; then
4359 AC_DEFINE(TARGET_DEFAULT_LONG_DOUBLE_128, 1,
4360 [Define if TFmode long double should be the default])
4363 AC_MSG_CHECKING(dl_iterate_phdr in target C library)
4364 gcc_cv_target_dl_iterate_phdr=unknown
4367 # <link.h> needs both a dl_iterate_phdr declaration and support for
4368 # compilation with largefile support.
4369 if grep dl_iterate_phdr $target_header_dir/link.h > /dev/null 2>&1 \
4370 && grep 'large file capable' $target_header_dir/link.h > /dev/null 2>&1; then
4371 gcc_cv_target_dl_iterate_phdr=yes
4373 gcc_cv_target_dl_iterate_phdr=no
4377 GCC_TARGET_TEMPLATE([TARGET_DL_ITERATE_PHDR])
4378 if test x$gcc_cv_target_dl_iterate_phdr = xyes; then
4379 AC_DEFINE(TARGET_DL_ITERATE_PHDR, 1,
4380 [Define if your target C library provides the `dl_iterate_phdr' function.])
4382 AC_MSG_RESULT($gcc_cv_target_dl_iterate_phdr)
4384 # Find out what GC implementation we want, or may, use.
4386 [ --with-gc={page,zone} choose the garbage collection mechanism to use
4394 AC_DEFINE(GGC_ZONE, 1, [Define if the zone collector is in use])
4397 AC_MSG_ERROR([$withval is an invalid option to --with-gc])
4402 echo "Using $GGC for garbage collection."
4404 # Libraries to use on the host. This will normally be set by the top
4405 # level Makefile. Here we simply capture the value for our Makefile.
4406 if test -z "${HOST_LIBS+set}"; then
4411 # Use the system's zlib library.
4413 zlibinc="-I\$(srcdir)/../zlib"
4414 AC_ARG_WITH(system-zlib,
4415 [ --with-system-zlib use installed libz],
4422 dnl Very limited version of automake's enable-maintainer-mode
4424 AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
4425 dnl maintainer-mode is disabled by default
4426 AC_ARG_ENABLE(maintainer-mode,
4427 [ --enable-maintainer-mode
4428 enable make rules and dependencies not useful
4429 (and sometimes confusing) to the casual installer],
4430 maintainer_mode=$enableval,
4433 AC_MSG_RESULT($maintainer_mode)
4435 if test "$maintainer_mode" = "yes"; then
4446 # Make empty files to contain the specs and options for each language.
4447 # Then add #include lines to for a compiler that has specs and/or options.
4453 # These (without "all_") are set in each config-lang.in.
4454 # `language' must be a single word so is spelled singularly.
4457 all_outputs='Makefile'
4458 # List of language makefile fragments.
4460 # Additional files for gengtype
4461 all_gtfiles="$target_gtfiles"
4463 # These are the languages that are set in --enable-languages,
4464 # and are available in the GCC tree.
4465 all_selected_languages=
4467 # Add the language fragments.
4468 # Languages are added via two mechanisms. Some information must be
4469 # recorded in makefile variables, these are defined in config-lang.in.
4470 # We accumulate them and plug them into the main Makefile.
4471 # The other mechanism is a set of hooks for each of the main targets
4472 # like `clean', `install', etc.
4474 language_hooks="Make-hooks"
4476 for lang in ${srcdir}/*/config-lang.in
4479 test "$lang" = "${srcdir}/*/config-lang.in" && continue
4481 lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
4482 if test "x$lang_alias" = x
4484 echo "$lang doesn't set \$language." 1>&2
4487 subdir="`echo $lang | sed -e 's,^.*/\([^/]*\)/config-lang.in$,\1,'`"
4488 subdirs="$subdirs $subdir"
4490 # $gcc_subdir is where the gcc integration files are to be found
4491 # for a language, both for internal compiler purposes (compiler
4492 # sources implementing front-end to GCC tree converters), and for
4493 # build infrastructure purposes (Make-lang.in, etc.)
4495 # This will be <subdir> (relative to $srcdir) if a line like
4496 # gcc_subdir="<subdir>" or gcc_subdir=<subdir>
4497 # is found in <langdir>/config-lang.in, and will remain <langdir>
4500 # Except for the language alias (fetched above), the regular
4501 # "config-lang.in" contents are always retrieved from $gcc_subdir,
4502 # so a <langdir>/config-lang.in setting gcc_subdir typically sets
4503 # only this and the language alias.
4505 gcc_subdir=`sed -n -e 's,^gcc_subdir=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^gcc_subdir=\([^ ]*\).*$,\1,p' $lang`
4506 if [ "$gcc_subdir" = "" ]; then
4507 gcc_subdir="$subdir"
4510 case ",$enable_languages," in
4512 all_selected_languages="$all_selected_languages $lang_alias"
4513 if test -f $srcdir/$gcc_subdir/lang-specs.h; then
4514 lang_specs_files="$lang_specs_files $srcdir/$gcc_subdir/lang-specs.h"
4526 . ${srcdir}/$gcc_subdir/config-lang.in
4527 if test "x$language" = x
4529 echo "${srcdir}/$gcc_subdir/config-lang.in doesn't set \$language." 1>&2
4534 case ",$enable_languages," in
4537 for i in $subdir_requires; do
4538 test -f "${srcdir}/$i/config-lang.in" && continue
4546 all_lang_makefrags="$all_lang_makefrags \$(srcdir)/$gcc_subdir/Make-lang.in"
4547 if test -f $srcdir/$gcc_subdir/lang.opt; then
4548 lang_opt_files="$lang_opt_files $srcdir/$gcc_subdir/lang.opt"
4549 all_opt_files="$all_opt_files $srcdir/$gcc_subdir/lang.opt"
4551 if test -f $srcdir/$gcc_subdir/$subdir-tree.def; then
4552 lang_tree_files="$lang_tree_files $srcdir/$gcc_subdir/$subdir-tree.def"
4554 all_languages="$all_languages $language"
4555 all_compilers="$all_compilers $compilers"
4556 all_outputs="$all_outputs $outputs"
4557 all_gtfiles="$all_gtfiles [[$subdir]] $gtfiles"
4558 case ",$enable_languages," in
4560 AC_DEFINE(ENABLE_LTO, 1, [Define to enable LTO support.])
4562 AC_SUBST(enable_lto)
4568 # Pick up gtfiles for c
4570 . ${srcdir}/c-config-lang.in
4571 all_gtfiles="$all_gtfiles [[c]] $gtfiles"
4574 for language in $all_selected_languages
4576 check_languages="$check_languages check-$language"
4579 # We link each language in with a set of hooks, reached indirectly via
4580 # lang.${target}. Only do so for selected languages.
4584 target_list="all.cross start.encap rest.encap tags \
4585 install-common install-man install-info install-pdf install-html dvi \
4586 pdf html uninstall info man srcextra srcman srcinfo \
4587 mostlyclean clean distclean maintainer-clean install-plugin"
4589 for t in $target_list
4592 for lang in $all_selected_languages
4596 echo "lang.$t: $x" >> Make-hooks
4600 # Option include files
4603 ${AWK} -f $srcdir/opt-include.awk $all_opt_files > option-includes.mk
4604 option_includes="option-includes.mk"
4605 AC_SUBST_FILE(option_includes)
4613 echo "dir ." > .gdbinit
4614 echo "dir ${srcdir}" >> .gdbinit
4615 if test x$gdb_needs_out_file_path = xyes
4617 echo "dir ${srcdir}/config/"`dirname ${out_file}` >> .gdbinit
4619 if test "x$subdirs" != x; then
4622 echo "dir ${srcdir}/$s" >> .gdbinit
4625 echo "source ${srcdir}/gdbinit.in" >> .gdbinit
4627 gcc_tooldir='$(libsubdir)/$(libsubdir_to_prefix)$(target_noncanonical)'
4628 AC_SUBST(gcc_tooldir)
4631 # Find a directory in which to install a shared libgcc.
4633 AC_ARG_ENABLE(version-specific-runtime-libs,
4634 [ --enable-version-specific-runtime-libs
4635 specify that runtime libraries should be
4636 installed in a compiler-specific directory])
4638 AC_ARG_WITH(slibdir,
4639 [ --with-slibdir=DIR shared libraries in DIR [[LIBDIR]]],
4640 slibdir="$with_slibdir",
4641 if test "${enable_version_specific_runtime_libs+set}" = set; then
4642 slibdir='$(libsubdir)'
4643 elif test "$host" != "$target"; then
4644 slibdir='$(build_tooldir)/lib'
4650 # Substitute configuration variables
4653 AC_SUBST(all_compilers)
4654 AC_SUBST(all_gtfiles)
4655 AC_SUBST(all_lang_makefrags)
4656 AC_SUBST(all_languages)
4657 AC_SUBST(all_selected_languages)
4658 AC_SUBST(build_exeext)
4659 AC_SUBST(build_install_headers_dir)
4660 AC_SUBST(build_xm_file_list)
4661 AC_SUBST(build_xm_include_list)
4662 AC_SUBST(build_xm_defines)
4663 AC_SUBST(build_file_translate)
4664 AC_SUBST(check_languages)
4665 AC_SUBST(cpp_install_dir)
4666 AC_SUBST(xmake_file)
4667 AC_SUBST(tmake_file)
4668 AC_SUBST(TM_ENDIAN_CONFIG)
4669 AC_SUBST(TM_MULTILIB_CONFIG)
4670 AC_SUBST(TM_MULTILIB_EXCEPTIONS_CONFIG)
4671 AC_SUBST(extra_gcc_objs)
4672 AC_SUBST(user_headers_inc_next_pre)
4673 AC_SUBST(user_headers_inc_next_post)
4674 AC_SUBST(extra_headers_list)
4675 AC_SUBST(extra_objs)
4676 AC_SUBST(extra_parts)
4677 AC_SUBST(extra_passes)
4678 AC_SUBST(extra_programs)
4679 AC_SUBST(float_h_file)
4680 AC_SUBST(gcc_config_arguments)
4681 AC_SUBST(gcc_gxx_include_dir)
4682 AC_SUBST(host_exeext)
4683 AC_SUBST(host_xm_file_list)
4684 AC_SUBST(host_xm_include_list)
4685 AC_SUBST(host_xm_defines)
4686 AC_SUBST(out_host_hook_obj)
4688 AC_SUBST(lang_opt_files)
4689 AC_SUBST(lang_specs_files)
4690 AC_SUBST(lang_tree_files)
4691 AC_SUBST(local_prefix)
4693 AC_SUBST(objc_boehm_gc)
4695 AC_SUBST(out_object_file)
4696 AC_SUBST(thread_file)
4697 AC_SUBST(tm_file_list)
4698 AC_SUBST(tm_include_list)
4699 AC_SUBST(tm_defines)
4700 AC_SUBST(tm_p_file_list)
4701 AC_SUBST(tm_p_include_list)
4702 AC_SUBST(xm_file_list)
4703 AC_SUBST(xm_include_list)
4704 AC_SUBST(xm_defines)
4705 AC_SUBST(use_gcc_stdint)
4706 AC_SUBST(c_target_objs)
4707 AC_SUBST(cxx_target_objs)
4708 AC_SUBST(fortran_target_objs)
4709 AC_SUBST(target_cpu_default)
4711 AC_SUBST_FILE(language_hooks)
4714 if test x${build} = x${host} ; then
4715 if test x${host} = x${target} ; then
4716 echo "Links are now set up to build a native compiler for ${target}." 1>&2
4718 echo "Links are now set up to build a cross-compiler" 1>&2
4719 echo " from ${host} to ${target}." 1>&2
4722 if test x${host} = x${target} ; then
4723 echo "Links are now set up to build (on ${build}) a native compiler" 1>&2
4724 echo " for ${target}." 1>&2
4726 echo "Links are now set up to build (on ${build}) a cross-compiler" 1>&2
4727 echo " from ${host} to ${target}." 1>&2
4731 AC_ARG_VAR(GMPLIBS,[How to link GMP])
4732 AC_ARG_VAR(GMPINC,[How to find GMP include files])
4734 AC_ARG_VAR(PPLLIBS,[How to link PPL])
4735 AC_ARG_VAR(PPLINC,[How to find PPL include files])
4737 AC_ARG_VAR(CLOOGLIBS,[How to link CLOOG])
4738 AC_ARG_VAR(CLOOGINC,[How to find CLOOG include files])
4739 if test "x${CLOOGLIBS}" != "x" ; then
4740 AC_DEFINE(HAVE_cloog, 1, [Define if cloog is in use.])
4743 # Check for plugin support
4744 AC_ARG_ENABLE(plugin,
4745 [ --enable-plugin enable plugin support],
4746 enable_plugin=$enableval,
4747 enable_plugin=yes; default_plugin=yes)
4753 if test x$build = x$host; then
4754 export_sym_check="nm${exeext} -g"
4755 elif test x$host = x$target; then
4756 export_sym_check="$gcc_cv_nm -g"
4762 if test x$build = x$host; then
4763 export_sym_check="objdump${exeext} -T"
4764 elif test x$host = x$target; then
4765 export_sym_check="$gcc_cv_objdump -T"
4772 if test x"$enable_plugin" = x"yes"; then
4774 AC_MSG_CHECKING([for exported symbols])
4775 if test "x$export_sym_check" != x; then
4776 echo "int main() {return 0;} int foobar() {return 0;}" > conftest.c
4777 ${CC} ${CFLAGS} ${LDFLAGS} conftest.c -o conftest > /dev/null 2>&1
4778 if $export_sym_check conftest | grep foobar > /dev/null; then
4779 : # No need to use a flag
4780 AC_MSG_RESULT([yes])
4782 AC_MSG_RESULT([yes])
4783 AC_MSG_CHECKING([for -rdynamic])
4784 ${CC} ${CFLAGS} ${LDFLAGS} -rdynamic conftest.c -o conftest > /dev/null 2>&1
4785 if $export_sym_check conftest | grep foobar > /dev/null; then
4787 pluginlibs="-rdynamic"
4792 AC_MSG_RESULT([$plugin_rdynamic])
4795 AC_MSG_RESULT([unable to check])
4800 AC_SEARCH_LIBS([dlopen], [dl])
4801 if test x"$ac_cv_search_dlopen" = x"-ldl"; then
4802 pluginlibs="$pluginlibs -ldl"
4806 # Check that we can build shared objects with -fPIC -shared
4807 saved_LDFLAGS="$LDFLAGS"
4808 saved_CFLAGS="$CFLAGS"
4811 CFLAGS=`echo $CFLAGS | sed s/-mdynamic-no-pic//g`
4812 CFLAGS="$CFLAGS -fPIC"
4813 LDFLAGS="$LDFLAGS -shared -undefined dynamic_lookup"
4816 CFLAGS="$CFLAGS -fPIC"
4817 LDFLAGS="$LDFLAGS -fPIC -shared"
4820 AC_MSG_CHECKING([for -fPIC -shared])
4822 [extern int X;],[return X == 0;],
4823 [AC_MSG_RESULT([yes]); have_pic_shared=yes],
4824 [AC_MSG_RESULT([no]); have_pic_shared=no])
4825 if test x"$have_pic_shared" != x"yes" -o x"$ac_cv_search_dlopen" = x"no"; then
4829 LDFLAGS="$saved_LDFLAGS"
4830 CFLAGS="$saved_CFLAGS"
4832 # If plugin support had been requested but not available, fail.
4833 if test x"$enable_plugin" = x"no" ; then
4834 if test x"$default_plugin" != x"yes"; then
4836 Building GCC with plugin support requires a host that supports
4837 -fPIC, -shared, -ldl and -rdynamic.])
4842 AC_SUBST(pluginlibs)
4843 AC_SUBST(enable_plugin)
4844 if test x"$enable_plugin" = x"yes"; then
4845 AC_DEFINE(ENABLE_PLUGIN, 1, [Define to enable plugin support.])
4849 AC_ARG_ENABLE(libquadmath-support,
4850 [AS_HELP_STRING([--disable-libquadmath-support],
4851 [disable libquadmath support for Fortran])],
4852 ENABLE_LIBQUADMATH_SUPPORT=$enableval,
4853 ENABLE_LIBQUADMATH_SUPPORT=yes)
4854 if test "${ENABLE_LIBQUADMATH_SUPPORT}" != "no" ; then
4855 AC_DEFINE(ENABLE_LIBQUADMATH_SUPPORT, 1,
4856 [Define to 1 to enable libquadmath support])
4860 # Configure the subdirectories
4861 # AC_CONFIG_SUBDIRS($subdirs)
4863 # Create the Makefile
4864 # and configure language subdirectories
4865 AC_CONFIG_FILES($all_outputs)
4867 AC_CONFIG_COMMANDS([default],
4869 case ${CONFIG_HEADERS} in
4870 *auto-host.h:config.in*)
4873 # Make sure all the subdirs exist.
4874 for d in $subdirs doc build c-family
4876 test -d $d || mkdir $d
4879 [subdirs='$subdirs'])