1 # Makefile for GNU C compiler.
2 # Copyright (C) 1987, 88, 90-98, 1999 Free Software Foundation, Inc.
4 #This file is part of GNU CC.
6 #GNU CC is free software; you can redistribute it and/or modify
7 #it under the terms of the GNU General Public License as published by
8 #the Free Software Foundation; either version 2, or (at your option)
11 #GNU CC is distributed in the hope that it will be useful,
12 #but WITHOUT ANY WARRANTY; without even the implied warranty of
13 #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 #GNU General Public License for more details.
16 #You should have received a copy of the GNU General Public License
17 #along with GNU CC; see the file COPYING. If not, write to
18 #the Free Software Foundation, 59 Temple Place - Suite 330,
19 #Boston MA 02111-1307, USA.
21 # The targets for external use include:
22 # all, doc, proto, install, install-cross, install-cross-rest,
23 # uninstall, TAGS, mostlyclean, clean, distclean, maintainer-clean,
24 # stage1, stage2, stage3, stage4.
26 # Suppress smart makes who think they know how to automake Yacc files
29 # Directory where sources are, from where we are.
33 # Variables that exist for you to override.
34 # See below for how to change them for certain systems.
36 # List of language subdirectories.
37 # This is overridden by configure.
40 # Selection of languages to be made.
41 # This is overridden by configure.
42 CONFIG_LANGUAGES
= @all_languages@
43 LANGUAGES
= c proto gcov
$(exeext
) $(CONFIG_LANGUAGES
)
45 # Languages should create dependencies of $(INTL_TARGETS) on generated
46 # sources in Make-lang.in. Example:
47 # $(INTL_TARGETS): $(srcdir)/cp/parse.c
48 INTL_TARGETS
= intl.
all intl.
install intl.distdir
50 # Selection of languages to be made during stage1 build.
51 # This is overridden by configure.
52 BOOT_LANGUAGES
= c @all_boot_languages@
58 # Various ways of specifying flags for compilations:
59 # CFLAGS is for the user to override to, e.g., do a bootstrap with -O2.
60 # BOOT_CFLAGS is the value of CFLAGS to pass
61 # to the stage2 and stage3 compilations
62 # WARN_CFLAGS are the warning flags to pass to stage2 and stage3.
63 # (And for stage 1 if the native compiler is GCC.) It is
64 # separate from BOOT_CFLAGS because people tend to override optimization
65 # flags and we'd like them to still have warnings turned on. They are free
66 # to explicitly turn warnings off if they wish.
67 # XCFLAGS is used for most compilations but not when using the GCC just built.
68 # TCFLAGS is used for compilations with the GCC just built.
71 CFLAGS
= -g @stage1_warn_cflags@
72 BOOT_CFLAGS
= -O2
$(CFLAGS
)
73 WARN_CFLAGS
= -W
-Wall
74 # These exists to be overridden by the x-* and t-* files, respectively.
83 # srcdir might be a relative pathname which won't be valid in a subdirectory,
84 # so we must use objdir/srcdir instead to make it safe. objdir is always
86 BISON
= `if [ -f $(objdir)/../bison/bison ] ; then case $(srcdir) in \
87 /*) echo $(objdir)/../bison/bison -L $(srcdir)/../bison/ ;; \
88 *) echo $(objdir)/../bison/bison -L $(objdir)/$(srcdir)/../bison/ ;; \
89 esac; else echo bison ; fi`
91 LEX
= `if [ -f $(objdir)/../flex/flex ] ; then echo $(objdir)/../flex/flex ; else echo flex ; fi`
98 # on sysV, define this as cp.
100 # Some systems may be missing symbolic links, regular links, or both.
101 # Allow configure to check this and use "ln -s", "ln", or "cp" as appropriate.
104 # These permit overriding just for certain files.
105 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
106 INSTALL_DATA
= @INSTALL_DATA@
107 MAKEINFO
= `if [ -f $(objdir)/../texinfo/makeinfo/Makefile ] ; \
108 then echo $(objdir)/../texinfo/makeinfo/makeinfo ; \
109 else echo makeinfo ; fi`
112 # For GNUmake: let us decide what gets passed to recursive makes.
116 # Define this as & to perform parallel make on a Sequent.
117 # Note that this has some bugs, and it seems currently necessary
118 # to compile all the gen* files first by hand to avoid erroneous results.
121 # How to invoke ranlib.
123 # Test to use to see whether ranlib exists on the system.
126 ||
[ -f
/usr
/bin
/ranlib
-o
-f
/bin
/ranlib
]
128 # Compiler to use for compiling libgcc1.a.
129 # OLDCC should not be the GNU C compiler,
130 # since that would compile typical libgcc1.a functions such as mulsi3
131 # into infinite recursions.
134 # CFLAGS for use with OLDCC, for compiling libgcc1.a.
135 # NOTE: -O does not work on some Unix systems!
138 # Version of ar to use when compiling libgcc1.a.
142 # Target to use when installing include directory. Either
143 # install-headers-tar or install-headers-cpio.
144 INSTALL_HEADERS_DIR
= @build_install_headers_dir@
146 # Header files that are made available under the same name
147 # to programs compiled with GCC.
148 USER_H
= $(srcdir)/ginclude
/stdarg.h
$(srcdir)/ginclude
/stddef.h \
149 $(srcdir)/ginclude
/varargs.h
$(srcdir)/ginclude
/va-alpha.h \
150 $(srcdir)/ginclude
/va-h8300.h
$(srcdir)/ginclude
/va-i860.h \
151 $(srcdir)/ginclude
/va-i960.h
$(srcdir)/ginclude
/va-mips.h \
152 $(srcdir)/ginclude
/va-m88k.h
$(srcdir)/ginclude
/va-mn10200.h \
153 $(srcdir)/ginclude
/va-mn10300.h
$(srcdir)/ginclude
/va-pa.h \
154 $(srcdir)/ginclude
/va-pyr.h
$(srcdir)/ginclude
/va-sparc.h \
155 $(srcdir)/ginclude
/va-clipper.h
$(srcdir)/ginclude
/va-spur.h \
156 $(srcdir)/ginclude
/va-m32r.h
$(srcdir)/ginclude
/va-sh.h \
157 $(srcdir)/ginclude
/va-v850.h
$(srcdir)/ginclude
/va-arc.h \
158 $(srcdir)/ginclude
/iso646.h
$(srcdir)/ginclude
/va-ppc.h \
159 $(srcdir)/ginclude
/va-c4x.h
$(EXTRA_HEADERS
) $(LANG_EXTRA_HEADERS
) \
160 $(srcdir)/ginclude
/proto.h
$(srcdir)/ginclude
/stdbool.h
162 # Target to use whe installing assert.h. Some systems may
163 # want to set this empty.
164 INSTALL_ASSERT_H
= install-assert-h
166 # The GCC to use for compiling libgcc2.a, enquire, and libgcc1-test.
167 # Usually the one we just built.
168 # Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
169 GCC_FOR_TARGET
= .
/xgcc
-B
$(build_tooldir
)/bin
/ -B.
/ -I
$(build_tooldir
)/include
171 # This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
172 # It omits XCFLAGS, and specifies -B./.
173 # It also specifies -I./include to find, e.g., stddef.h.
174 GCC_CFLAGS
=$(INTERNAL_CFLAGS
) $(X_CFLAGS
) $(T_CFLAGS
) $(CFLAGS
) -I.
/include $(TCFLAGS
)
176 # Sed command to transform gcc to installed name. Overwritten by configure.
177 program_transform_name
= @program_transform_name@
178 program_transform_cross_name
= s
,^
,$(target_alias
)-,
180 build_canonical
= @build_canonical@
181 host_canonical
= @host_canonical@
183 # Tools to use when building a cross-compiler.
184 # These are used because `configure' appends `cross-make'
185 # to the makefile when making a cross-compiler.
187 # Use the tools from the build tree, if they are available.
189 # objdir is set by configure.
193 if [ -f $(objdir)/../binutils/ar ] ; then \
194 echo $(objdir)/../binutils/ar ; \
196 if [ "$(host_canonical)" = "$(target)" ] ; then \
199 t='$(program_transform_name)'; echo ar | sed -e $$t ; \
202 AR_FLAGS_FOR_TARGET
= rc
203 RANLIB_FOR_TARGET
= ` \
204 if [ -f $(objdir)/../binutils/ranlib ] ; then \
205 echo $(objdir)/../binutils/ranlib ; \
207 if [ "$(host_canonical)" = "$(target)" ] ; then \
210 t='$(program_transform_name)'; echo ranlib | sed -e $$t ; \
213 RANLIB_TEST_FOR_TARGET
= \
214 [ -f
$(RANLIB_FOR_TARGET
) ] \
215 ||
( [ "$(host_canonical)" = "$(target)" ] \
216 && [ -f
/usr
/bin
/ranlib
-o
-f
/bin
/ranlib
] )
218 # Dir to search for system headers. Overridden by cross-make.
219 SYSTEM_HEADER_DIR
= /usr
/include
221 # Control whether to run fixproto.
222 STMP_FIXPROTO
= stmp-fixproto
224 # Test to see whether <limits.h> exists in the system header files.
225 LIMITS_H_TEST
= [ -f
$(SYSTEM_HEADER_DIR
)/limits.h
]
228 target_alias
=@target_alias@
229 xmake_file
=@dep_host_xmake_file@
230 tmake_file
=@dep_tmake_file@
231 out_file
=$(srcdir)/config
/@out_file@
232 out_object_file
=@out_object_file@
233 md_file
=$(srcdir)/config
/@md_file@
234 tm_file
=@tm_file_list@
235 build_xm_file
=@build_xm_file_list@
236 host_xm_file
=@host_xm_file_list@
237 lang_specs_files
=@lang_specs_files@
238 lang_options_files
=@lang_options_files@
239 lang_tree_files
=@lang_tree_files@
240 GCC_THREAD_FILE
=@thread_file@
241 OBJC_BOEHM_GC
=@objc_boehm_gc@
242 GTHREAD_FLAGS
=@gthread_flags@
243 # Be prepared for gcc2 merges.
244 gcc_version
=@gcc_version@
245 gcc_version_trigger
=@gcc_version_trigger@
246 version
=$(gcc_version
)
247 mainversion
=`sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/' < $(srcdir)/version.c`
249 # Common prefix for installation directories.
250 # NOTE: This directory must exist when you start installation.
252 # Directory in which to put localized header files. On the systems with
253 # gcc as the native cc, `local_prefix' may not be `prefix' which is
255 # NOTE: local_prefix *should not* default from prefix.
256 local_prefix
= @local_prefix@
257 # Directory in which to put host dependent programs and libraries
258 exec_prefix = @
exec_prefix@
259 # Directory in which to put the executable for the command `gcc'
261 # Directory in which to put the directories used by the compiler.
263 # Directory in which the compiler finds executables, libraries, etc.
264 libsubdir
= $(libdir)/gcc-lib
/$(target_alias
)/$(version
)
265 # Used to produce a relative $(gcc_tooldir) in gcc.o
266 unlibsubdir
= ..
/..
/..
267 # Directory in which to find other cross-compilation tools and headers.
269 # Used in install-cross.
270 gcc_tooldir
= @gcc_tooldir@
271 # Since tooldir does not exist at build-time, use -B$(build_tooldir)/bin/
272 build_tooldir
= $(exec_prefix)/$(target_alias
)
273 # Directory in which the compiler finds g++ includes.
274 gcc_gxx_include_dir
= @gcc_gxx_include_dir@
275 # Directory to search for site-specific includes.
276 includedir = $(local_prefix
)/include
277 # assertdir is overridden in cross-make.
278 # (But this currently agrees with what is in cross-make.)
279 assertdir
= $(gcc_tooldir
)/include
280 # where the info files go
282 # Where cpp should go besides $prefix/bin if necessary
283 cpp_install_dir
= @cpp_install_dir@
284 # where the locale files go
285 datadir = $(prefix)/@DATADIRNAME@
286 localedir
= $(datadir)/locale
287 # Extension (if any) to put in installed man-page filename.
290 exeext
= @host_exeext@
291 build_exeext
= @build_exeext@
293 # Directory in which to put man pages.
295 man1dir = $(mandir)/man1
296 # Dir for temp files.
299 # Top build directory, relative to here.
302 # Whether we were configured with NLS.
305 # Internationalization library.
306 INTLLIBS
= @INTLLIBS@
308 # List of internationalization subdirectories.
310 INTL_SUBDIRS
= intl
$(POSUB
)
312 # Additional system libraries to link with.
315 # Change this to a null string if obstacks are installed in the
319 # Configure will set these if you need vfprintf and possibly _doprnt support.
323 # Specify the rule for actually making libgcc.a,
325 # and the rule for installing it.
326 INSTALL_LIBGCC
= install-libgcc
328 # Specify the rule for actually making libgcc1.a.
329 # The value may be empty; that means to do absolutely nothing
330 # with or for libgcc1.a.
333 # Specify the rule for making libgcc1.a for a cross-compiler.
334 # The default rule assumes that libgcc1.a is supplied by the user.
335 CROSS_LIBGCC1
= libgcc1.cross
337 # Specify the rule for actually making libgcc2.a.
340 # Options to use when compiling libgcc2.a.
341 # -g1 causes output of debug info only for file-scope entities.
342 # we use this here because that should be enough, and also
343 # so that -g1 will be tested.
345 LIBGCC2_DEBUG_CFLAGS
= -g1
346 LIBGCC2_CFLAGS
= -O2
$(LIBGCC2_INCLUDES
) $(GCC_CFLAGS
) $(TARGET_LIBGCC2_CFLAGS
) $(LIBGCC2_DEBUG_CFLAGS
) $(GTHREAD_FLAGS
) -DIN_LIBGCC2
-D__GCC_FLOAT_NOT_NEEDED @inhibit_libc@
348 # Additional options to use when compiling libgcc2.a.
349 # Some targets override this to -Iinclude
352 # Additional target-dependent options for compiling libgcc2.a.
353 TARGET_LIBGCC2_CFLAGS
=
355 # Things which must be built before building libgcc2.a.
356 # Some targets override this to stmp-int-hdrs
359 # libgcc1-test target (must also be overridable for a target)
360 LIBGCC1_TEST
= libgcc1-test
362 # List of extra executables that should be compiled for this target machine
363 # that are used for compiling from source code to object code.
364 # The rules for compiling them should be in the t-* file for the machine.
365 EXTRA_PASSES
=@extra_passes@
367 # Like EXTRA_PASSES, but these are used when linking.
368 EXTRA_PROGRAMS
= @extra_programs@
370 # List of extra object files that should be compiled for this target machine.
371 # The rules for compiling them should be in the t-* file for the machine.
372 EXTRA_PARTS
= @extra_parts@
374 # List of extra object files that should be compiled and linked with
375 # compiler proper (cc1, cc1obj, cc1plus).
376 EXTRA_OBJS
= @extra_objs@
378 # List of extra object files that should be compiled and linked with
380 EXTRA_GCC_OBJS
=@host_extra_gcc_objs@
382 # List of additional header files to install.
383 # Often this is edited directly by `configure'.
384 EXTRA_HEADERS
=@extra_headers_list@
386 # Set this to `collect2' to enable use of collect2.
387 USE_COLLECT2
= @will_use_collect2@
388 # If we might be using collect2, then this variable will be set to
389 # -DUSE_COLLECT2. toplev.c, collect2.c and libgcc2.c all need to
390 # if we may be using collect2.
391 MAYBE_USE_COLLECT2
= @maybe_use_collect2@
392 # It is convenient for configure to add the assignment at the beginning,
393 # so don't override it here.
394 USE_COLLECT2
= collect2
$(exeext
)
396 # List of extra C and assembler files to add to libgcc1.a.
397 # Assembler files should have names ending in `.asm'.
400 # List of extra C and assembler files to add to libgcc2.a.
401 # Assembler files should have names ending in `.asm'.
404 # Handle cpp installation.
408 # We do not try to build float.h anymore. Let configure select the
409 # appropriate pre-built float.h file for the target.
410 FLOAT_H
=@float_h_file@
412 # Program to convert libraries.
415 # Control whether header files are installed.
416 INSTALL_HEADERS
=install-headers
418 # Additional directories of header files to run fixincludes on.
419 # These should be directories searched automatically by default
420 # just as /usr/include is.
421 # *Do not* use this for directories that happen to contain
422 # header files, but are not searched automatically by default.
423 # On most systems, this is empty.
424 OTHER_FIXINCLUDES_DIRS
=
426 # A list of all the language-specific executables.
427 # This is overridden by configure.
428 COMPILERS
= cc1
$(exeext
) @all_compilers@
430 # List of things which should already be built whenever we try to use xgcc
431 # to compile anything (without linking).
432 GCC_PASSES
=xgcc
$(exeext
) cc1
$(exeext
) cpp$(exeext
) $(EXTRA_PASSES
)
434 # List of things which should already be built whenever we try to use xgcc
436 GCC_PARTS
=$(GCC_PASSES
) $(LIBGCC
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
) $(EXTRA_PARTS
)
438 # Directory to link to, when using the target `maketest'.
441 # Guaranteed to not exist when not passing md through cpp.
442 # This value is overridden directly by configure.
443 MD_FILE
= md-cpp-not-used
445 # Flags to use when cross-building GCC.
446 # Prefix to apply to names of object files when using them
447 # to run on the machine we are compiling on.
449 # Prefix to apply to names of object files when compiling them
450 # to run on the machine we are compiling on.
451 # The default for this variable is chosen to keep these rules
452 # out of the way of the other rules for compiling the same source files.
455 HOST_CFLAGS
=$(ALL_CFLAGS
)
457 HOST_INTLLIBS
=$(INTLLIBS
)
458 HOST_LDFLAGS
=$(LDFLAGS
)
459 HOST_CPPFLAGS
=$(ALL_CPPFLAGS
)
460 HOST_ALLOCA
=$(ALLOCA
)
461 HOST_MALLOC
=$(MALLOC
)
462 HOST_OBSTACK
=$(OBSTACK
)
463 HOST_VFPRINTF
=$(VFPRINTF
)
464 HOST_DOPRINT
=$(DOPRINT
)
466 # Actual name to use when installing a native compiler.
467 GCC_INSTALL_NAME
= `t='$(program_transform_name)'; echo gcc | sed -e $$t`
468 CPP_INSTALL_NAME
= `t='$(program_transform_name)'; echo cpp | sed -e $$t`
469 PROTOIZE_INSTALL_NAME
= `t='$(program_transform_name)'; echo protoize | sed -e $$t`
470 UNPROTOIZE_INSTALL_NAME
= `t='$(program_transform_name)'; echo unprotoize | sed -e $$t`
471 GCOV_INSTALL_NAME
= `t='$(program_transform_name)'; echo gcov | sed -e $$t`
473 # Actual name to use when installing a cross-compiler.
474 GCC_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo gcc | sed -e $$t`
475 PROTOIZE_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo protoize | sed -e $$t`
476 UNPROTOIZE_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo unprotoize | sed -e $$t`
478 # Choose the real default target.
481 # Choose the real install target.
482 INSTALL_TARGET
=install-normal
484 # Setup the testing framework, if you have one
485 EXPECT
= `if [ -f $${rootme}/../expect/expect ] ; then \
486 echo $${rootme}/../expect/expect ; \
487 else echo expect ; fi`
489 RUNTEST
= `if [ -f $${srcdir}/../dejagnu/runtest ] ; then \
490 echo $${srcdir}/../dejagnu/runtest ; \
491 else echo runtest; fi`
494 # Extra symbols for fixproto to define when parsing headers.
497 # Extra flags to use when compiling crt{begin,end}.o.
500 # Extra flags to use when compiling [m]crt0.o.
503 # "t" or nothing, for building multilibbed versions of, say, crtbegin.o.
506 # End of variables for you to override.
508 # Definition of `all' is here so that new rules inserted by sed
509 # do not specify the default target.
510 # The real definition is under `all.internal' (for native compilers)
511 # or `all.cross' (for cross compilers).
514 # This tells GNU Make version 3 not to put all variables in the environment.
517 # sed inserts variable overrides after the following line.
531 # Now figure out from those variables how to compile and link.
535 # IN_GCC tells various files that system.h, toplev.c, etc are available.
536 INTERNAL_CFLAGS
= $(CROSS
) -DIN_GCC @extra_c_flags@
538 # This is the variable actually used when we compile.
539 # If you change this line, you probably also need to change the definition
540 # of HOST_CFLAGS in build-make to match.
541 ALL_CFLAGS
= $(INTERNAL_CFLAGS
) $(X_CFLAGS
) $(T_CFLAGS
) $(CFLAGS
) $(XCFLAGS
) \
545 ALL_CPPFLAGS
= $(CPPFLAGS
) $(X_CPPFLAGS
) $(T_CPPFLAGS
)
547 # Even if ALLOCA is set, don't use it if compiling with GCC.
548 USE_ALLOCA
= ${ALLOCA}
549 USE_HOST_ALLOCA
= ` case "${HOST_ALLOCA}" in ?*) echo ${HOST_PREFIX}${HOST_ALLOCA} ;; esac `
550 USE_HOST_MALLOC
= ` case "${HOST_MALLOC}" in ?*) echo ${HOST_PREFIX}${HOST_MALLOC} ;; esac `
551 USE_HOST_OBSTACK
= ` case "${HOST_OBSTACK}" in ?*) echo ${HOST_PREFIX}${HOST_OBSTACK} ;; esac `
552 USE_HOST_VFPRINTF
= ` case "${HOST_VFPRINTF}" in ?*) echo ${HOST_PREFIX}${HOST_VFPRINTF} ;; esac `
553 USE_HOST_DOPRINT
= ` case "${HOST_DOPRINT}" in ?*) echo ${HOST_PREFIX}${HOST_DOPRINT} ;; esac `
555 # Dependency on obstack, alloca, malloc or whatever library facilities
556 # are not installed in the system libraries.
557 # We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
558 LIBDEPS
= $(INTLLIBS
) $(OBSTACK
) $(ALLOCA
) $(MALLOC
) $(VFPRINTF
) $(DOPRINT
)
560 # Likewise, for use in the tools that must run on this machine
561 # even if we are cross-building GCC.
562 # We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
563 HOST_LIBDEPS
= $(HOST_PREFIX
)$(HOST_INTLLIBS
) $(HOST_PREFIX
)$(HOST_OBSTACK
) $(HOST_PREFIX
)$(HOST_ALLOCA
) $(HOST_PREFIX
)$(HOST_MALLOC
) $(HOST_PREFIX
)$(HOST_VFPRINTF
) $(HOST_PREFIX
)$(HOST_DOPRINT
)
565 # How to link with both our special library facilities
566 # and the system's installed libraries.
567 LIBS
= $(OBSTACK
) $(USE_ALLOCA
) $(MALLOC
) $(INTLLIBS
) @LIBS@
$(VFPRINTF
) $(DOPRINT
) $(CLIB
) ..
/libiberty
/libiberty.a
569 # Likewise, for use in the tools that must run on this machine
570 # even if we are cross-building GCC.
571 HOST_LIBS
= $(USE_HOST_OBSTACK
) $(USE_HOST_ALLOCA
) $(USE_HOST_MALLOC
) \
572 $(HOST_INTLLIBS
) $(USE_HOST_VFPRINTF
) $(USE_HOST_DOPRINT
) \
575 HOST_RTL
= $(HOST_PREFIX
)rtl.o
$(HOST_PREFIX
)bitmap.o
576 HOST_RTLANAL
= $(HOST_PREFIX
)rtlanal.o
577 HOST_PRINT
= $(HOST_PREFIX
)print-rtl.o
578 HOST_ERRORS
= $(HOST_PREFIX
)errors.o
580 # Specify the directories to be searched for header files.
581 # Both . and srcdir are used, in that order,
582 # so that tm.h and config.h will be found in the compilation
583 # subdirectory rather than in the source directory.
584 INCLUDES
= -I.
-I
$(srcdir) -I
$(srcdir)/config
-I
$(srcdir)/..
/include
586 # Always use -I$(srcdir)/config when compiling.
588 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $<
590 # This tells GNU make version 3 not to export all the variables
591 # defined in this file into the environment.
594 # Support for additional languages (other than c and objc).
595 # ??? objc can be supported this way too (leave for later).
597 # These next lines are overridden by configure.
598 LANG_MAKEFILES
= @all_lang_makefiles@
599 LANG_STAGESTUFF
= @all_stagestuff@
600 LANG_DIFF_EXCLUDES
= @all_diff_excludes@
601 LANG_LIB2FUNCS
= @all_lib2funcs@
602 LANG_EXTRA_HEADERS
= @all_headers@
604 # Flags to pass to recursive makes.
605 # CC is set by configure. Hosts without symlinks need special handling
606 # because we need CC="stage1/xgcc -Bstage1/" to work in the language
608 # ??? The choices here will need some experimenting with.
609 ORDINARY_FLAGS_TO_PASS
= \
610 "AR_FLAGS_FOR_TARGET=$(AR_FLAGS_FOR_TARGET)" \
611 "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
613 "BISONFLAGS=$(BISONFLAGS)" \
616 "GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
617 "LDFLAGS=$(LDFLAGS)" \
619 "LEXFLAGS=$(LEXFLAGS)" \
622 "MAKEINFO=$(MAKEINFO)" \
623 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
624 "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
625 "RANLIB_TEST_FOR_TARGET=$(RANLIB_TEST_FOR_TARGET)" \
627 "STAGE_PREFIX=@stage_prefix_set_by_configure@" \
629 "build_exeext=$(build_exeext)" \
631 "exec_prefix=$(exec_prefix)" \
633 "local_prefix=$(local_prefix)" \
634 "gxx_include_dir=$(gcc_gxx_include_dir)" \
635 "tooldir=$(tooldir)" \
636 "gcc_tooldir=$(gcc_tooldir)" \
638 "libsubdir=$(libsubdir)" \
639 "datadir=$(datadir)" \
640 "distdir=../tmp/\$$(subdir)" \
641 "localedir=$(localedir)"
642 FLAGS_TO_PASS
= $(ORDINARY_FLAGS_TO_PASS
) "CC=@cc_set_by_configure@"
643 PREPEND_DOTDOT_TO_RELATIVE_PATHS
= sed \
644 -e
's|^ *[^ /][^ /]*/|%&|' \
646 -e
's|% *[^- /]|%&|g' \
649 SUBDIR_FLAGS_TO_PASS
= $(ORDINARY_FLAGS_TO_PASS
) \
650 "CC=`echo @quoted_cc_set_by_configure@ | $(PREPEND_DOTDOT_TO_RELATIVE_PATHS)`"
652 # Lists of files for various purposes.
654 # Language-specific object files for C and Objective C.
655 C_AND_OBJC_OBJS
= c-lex.o c-pragma.o c-decl.o c-typeck.o c-convert.o \
656 c-aux-info.o c-common.o c-iterate.o @extra_c_objs@
658 # Language-specific object files for C.
659 C_OBJS
= c-parse.o c-lang.o
$(C_AND_OBJC_OBJS
)
661 # Language-independent object files.
662 OBJS
= toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
663 function.o stmt.o except.o expr.o calls.o expmed.o explow.o optabs.o real.o \
664 builtins.o intl.o varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o genrtl.o \
665 dbxout.o sdbout.o dwarfout.o dwarf2out.o xcoffout.o bitmap.o alias.o gcse.o \
666 integrate.o jump.o cse.o loop.o unroll.o flow.o stupid.o combine.o varray.o \
667 regclass.o regmove.o local-alloc.o global.o reload.o reload1.o caller-save.o \
668 insn-peep.o reorg.o haifa-sched.o final.o recog.o reg-stack.o \
669 insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o lcm.o \
670 profile.o insn-attrtab.o
$(out_object_file
) $(EXTRA_OBJS
) convert.o \
671 mbchar.o dyn-string.o splay-tree.o graph.o sbitmap.o resource.o hash.o lists.o
673 # GEN files are listed separately, so they can be built before doing parallel
674 # makes for cc1 or cc1plus. Otherwise sequent parallel make attempts to load
675 # them before rtl.o is compiled.
676 GEN
= genemit genoutput genrecog genextract genflags gencodes genconfig \
677 genpeep gengenrtl gencheck
681 # Files to be copied away after each stage in building.
682 STAGESTUFF
= *$(objext
) insn-flags.h insn-config.h insn-codes.h \
683 insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
684 insn-attr.h insn-attrtab.c insn-opinit.c tree-check.h \
685 s-flags s-config s-codes s-mlib s-under\
686 s-output s-recog s-emit s-extract s-peep s-check \
687 s-attr s-attrtab s-opinit s-crt s-crtS s-crt0 \
688 genemit
$(build_exeext
) genoutput
$(build_exeext
) genrecog
$(build_exeext
) \
689 genextract
$(build_exeext
) genflags
$(build_exeext
) gencodes
$(build_exeext
) \
690 genconfig
$(build_exeext
) genpeep
$(build_exeext
) genattrtab
$(build_exeext
) \
691 genattr
$(build_exeext
) genopinit
$(build_exeext
) gengenrtl
$(build_exeext
) \
692 gencheck
$(build_exeext
) \
693 xgcc
$(exeext
) xcpp
$(exeext
) cc1
$(exeext
) cpp$(exeext
) $(EXTRA_PASSES
) \
694 $(EXTRA_PARTS
) $(EXTRA_PROGRAMS
) gcc-cross
$(exeext
) \
695 $(CCCP
)$(exeext
) cc1obj
$(exeext
) enquire
$(exeext
) \
696 protoize
$(exeext
) unprotoize
$(exeext
) \
697 specs collect2
$(exeext
) $(USE_COLLECT2
) underscore.c \
699 *.greg
*.lreg
*.combine
*.flow
*.cse
*.jump
*.rtl
*.tree
*.loop \
700 *.dbr
*.jump2
*.sched
*.cse2
*.sched2
*.stack
*.gcse
*.flow2
*.peephole2 \
704 # Members of libgcc1.a.
705 LIB1FUNCS
= _mulsi3 _udivsi3 _divsi3 _umodsi3 _modsi3 \
706 _lshrsi3 _ashrsi3 _ashlsi3 \
707 _divdf3 _muldf3 _negdf2 _adddf3 _subdf3 \
708 _fixdfsi _fixsfsi _floatsidf _floatsisf _truncdfsf2 _extendsfdf2 \
709 _addsf3 _negsf2 _subsf3 _mulsf3 _divsf3 \
710 _eqdf2 _nedf2 _gtdf2 _gedf2 _ltdf2 _ledf2 \
711 _eqsf2 _nesf2 _gtsf2 _gesf2 _ltsf2 _lesf2
713 # Library members defined in libgcc2.c.
714 LIB2FUNCS
= _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 \
715 _lshrdi3 _ashldi3 _ashrdi3 _ffsdi2 \
716 _udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf \
717 _fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi \
718 _fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi \
719 _fixtfdi _fixunstfdi _floatditf \
720 __gcc_bcmp _varargs __dummy _eprintf \
721 _bb _shtab _clear_cache _trampoline __main _exit \
726 FPBIT_FUNCS
= _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \
727 _fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \
728 _lt_sf _le_sf _si_to_sf _sf_to_si _negate_sf _make_sf \
731 DPBIT_FUNCS
= _pack_df _unpack_df _addsub_df _mul_df _div_df \
732 _fpcmp_parts_df _compare_df _eq_df _ne_df _gt_df _ge_df \
733 _lt_df _le_df _si_to_df _df_to_si _negate_df _make_df \
736 # The files that "belong" in CONFIG_H are deliberately omitted
737 # because having them there would not be useful in actual practice.
738 # All they would do is cause complete recompilation every time
739 # one of the machine description files is edited.
740 # That may or may not be what one wants to do.
741 # If it is, rm *.o is an easy way to do it.
742 # CONFIG_H = $(host_xm_file) $(tm_file)
744 RTL_BASE_H
= rtl.h rtl.def machmode.h machmode.def
745 RTL_H
= $(RTL_BASE_H
) genrtl.h
746 TREE_H
= tree.h real.h tree.def machmode.h machmode.def tree-check.h
747 BASIC_BLOCK_H
= basic-block.h bitmap.h sbitmap.h
748 DEMANGLE_H
= $(srcdir)/..
/include/demangle.h
750 EXPR_H
= expr.h insn-codes.h
751 REGS_H
= regs.h varray.h machmode.h machmode.def
753 # Language makefile fragments.
755 # The following targets define the interface between us and the languages.
757 # all.build, all.cross, start.encap, rest.encap,
759 # install-normal, install-common, install-info, install-man,
760 # uninstall, distdir,
761 # mostlyclean, clean, distclean, extraclean, maintainer-clean,
762 # stage1, stage2, stage3, stage4
764 # Each language is linked in with a series of hooks (since we can't use `::'
765 # targets). The name of each hooked is "lang.${target_name}" (eg: lang.info).
766 # Configure computes and adds these here.
771 # sed inserts language fragments after the following line.
772 ####language fragments
775 # End of language makefile fragments.
777 # The only suffixes we want for implicit rules are .c and .o, so clear
778 # the list and add them. This speeds up GNU Make, and allows -r to work.
782 Makefile
: $(srcdir)/Makefile.in config.status
$(srcdir)/version.c \
783 $(xmake_file
) $(tmake_file
) $(LANG_MAKEFILES
)
784 $(SHELL
) $(srcdir)/configure.frag
$(srcdir) "$(SUBDIRS)" \
785 "$(xmake_file)" "$(tmake_file)"
786 cp config.status config.run
787 LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.run
790 $(srcdir)/configure
: $(srcdir)/configure.in
791 cd
$(srcdir); autoconf
793 # cstamp-h.in controls rebuilding of config.in.
794 # It is named cstamp-h.in and not stamp-h.in so the mostlyclean rule doesn't
795 # delete it. A stamp file is needed as autoheader won't update the file if
796 # nothing has changed.
797 # It remains in the source directory and is part of the distribution.
798 # This follows what is done in shellutils, fileutils, etc.
799 # "echo timestamp" is used instead of touch to be consistent with other
800 # packages that use autoconf (??? perhaps also to avoid problems with patch?).
801 # ??? Newer versions have a maintainer mode that may be useful here.
802 $(srcdir)/config.in
: $(srcdir)/cstamp-h.in
803 $(srcdir)/cstamp-h.in
: $(srcdir)/configure.in
$(srcdir)/acconfig.h
804 cd
$(srcdir) && autoheader
805 @
rm -f
$(srcdir)/cstamp-h.in
806 echo timestamp
> $(srcdir)/cstamp-h.in
807 auto-host.h
: cstamp-h
; @true
808 cstamp-h
: config.in config.status
809 CONFIG_HEADERS
=auto-host.h
:config.in LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.status
811 # Really, really stupid make features, such as SUN's KEEP_STATE, may force
812 # a target to build even if it is up-to-date. So we must verify that
813 # config.status does not exist before failing.
814 config.status
: configure version.c
815 @if
[ ! -f config.status
] ; then \
816 echo You must configure gcc. Look at the INSTALL file for details.
; \
819 LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.status
--recheck
; \
822 all.internal
: start.encap rest.encap doc
823 # This is what to compile if making a cross-compiler.
824 # Note that we can compile enquire using the cross-compiler just built,
825 # although we can't run it on this machine.
826 all.cross
: native gcc-cross specs stmp-headers
$(STMP_FIXPROTO
) $(LIBGCC
) \
827 $(LIBGCC1_TEST
) $(EXTRA_PARTS
) lang.
all.cross doc
828 # This is what to compile if making gcc with a cross-compiler.
829 all.build
: native xgcc
$(exeext
) xcpp
$(exeext
) $(EXTRA_PARTS
) lang.
all.build
830 # This is what must be made before installing GCC and converting libraries.
831 start.encap
: native xgcc
$(exeext
) xcpp
$(exeext
) specs
$(LIBGCC1
) \
832 xlimits.h lang.start.encap
833 # These can't be made until after GCC can run.
834 rest.encap
: stmp-headers
$(STMP_FIXPROTO
) $(LIBGCC
) $(EXTRA_PARTS
) lang.rest.encap
835 # This is what is made with the host's compiler
836 # whether making a cross compiler or not.
837 native
: config.status auto-host.h
cpp$(exeext
) intl.
all $(LANGUAGES
) \
838 $(EXTRA_PASSES
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
)
840 # Define the names for selecting languages in LANGUAGES.
844 # Tell GNU make these are phony targets.
845 .PHONY
: C c PROTO proto
847 # On the target machine, finish building a cross compiler.
848 # This does the things that can't be done on the host machine.
849 rest.cross
: $(LIBGCC
) specs
851 # Verify that it works to compile and link libgcc1-test.
852 # If it does, then there are sufficient replacements for libgcc1.a.
853 libgcc1-test
: libgcc1-test.o native
$(GCC_PARTS
)
854 @echo
"Testing libgcc1. Ignore linker warning messages."
855 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) libgcc1-test.o
-o libgcc1-test \
856 -nostartfiles
-nostdlib
`$(GCC_FOR_TARGET) --print-libgcc-file-name`
857 libgcc1-test.o
: libgcc1-test.c native xgcc
$(exeext
)
858 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) -c
$(srcdir)/libgcc1-test.c
860 # Recompile all the language-independent object files.
861 # This is used only if the user explicitly asks for it.
862 compilations
: ${OBJS}
864 # Create a list of the language-independent object files so the language
865 # subdirectories needn't mention their names explicitly.
866 stamp-objlist
: $(OBJS
)
867 echo
" $(OBJS)" | sed
-e
's, \([a-z0-9]\), ../\1,g' -e
's/\.o/$(objext)/g' >stamp-objlist
869 # We call this executable `xgcc' rather than `gcc'
870 # to avoid confusion if the current directory is in the path
871 # and CC is `gcc'. It is renamed to `gcc' when it is installed.
872 xgcc
$(exeext
): gcc.o gccspec.o version.o intl.o
prefix.o \
873 version.o
$(LIBDEPS
) $(EXTRA_GCC_OBJS
)
874 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ gcc.o gccspec.o intl.o \
875 prefix.o version.o
$(EXTRA_GCC_OBJS
) $(LIBS
)
877 # We call this executable `xcpp' rather than `cpp'
878 # since the real preprocessor is named `cpp'. It too is renamed
879 # when it is installed.
880 # The only difference from xgcc is that it's linked with cppspec.o
881 # instead of gccspec.o.
882 xcpp
$(exeext
): gcc.o cppspec.o version.o intl.o
prefix.o \
883 version.o
$(LIBDEPS
) $(EXTRA_GCC_OBJS
)
884 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ gcc.o cppspec.o intl.o \
885 prefix.o version.o
$(EXTRA_GCC_OBJS
) $(LIBS
)
887 # Dump a specs file to make -B./ read these specs over installed ones.
889 $(GCC_FOR_TARGET
) -dumpspecs
> tmp-specs
892 # We do want to create an executable named `xgcc', so we can use it to
894 # Also create gcc-cross, so that install-common will install properly.
895 gcc-cross
: xgcc
$(exeext
)
896 cp xgcc
$(exeext
) gcc-cross
$(exeext
)
898 cc1
$(exeext
): $(P
) $(OBJS
) $(C_OBJS
) $(LIBDEPS
)
899 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(OBJS
) $(C_OBJS
) $(LIBS
)
901 # Build the version of limits.h that we will install.
902 xlimits.h
: glimits.h limitx.h limity.h
903 if
$(LIMITS_H_TEST
) ; then \
904 cat
$(srcdir)/limitx.h
$(srcdir)/glimits.h
$(srcdir)/limity.h
> tmp-xlimits.h
; \
906 cat
$(srcdir)/glimits.h
> tmp-xlimits.h
; \
908 mv tmp-xlimits.h xlimits.h
911 # This is done in two parts because some functions, in libgcc1.c,
912 # must be compiled with something other than GCC,
913 # while the rest, in libgcc2.c, must be compiled with xgcc.
914 # That means we can't do libgcc2.c until after xgcc, cc1, etc.
916 # Use this as value of LIBGCC1 to cause conversion to GNU library format.
917 # LIBCONVERT should put its output in libgcc1.conv.
918 libgcc1.conv
: libgcc1.a
919 $(LIBCONVERT
) libgcc1.a libgcc1.conv
921 # Use this as value of LIBGCC1 to inhibit use of libgcc1.c entirely.
922 # Make an empty file instead.
923 libgcc1.null
: $(GCC_PASSES
)
924 echo
"void __foo () {}" > dummy.c
925 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) -c dummy.c
926 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) libgcc1.null dummy
$(objext
)
927 rm -f dummy
$(objext
) dummy.c
929 # This is $(LIBGCC1) for a cross-compiler.
930 # We have no automatic way of building libgcc1.a,
931 # so it's up to the installer to find a way to do that.
932 # This rule deliberately does not depend on libgcc1.a
933 # so that it will fail if the installer hasn't provided it.
935 mv libgcc1.a libgcc1.cross ||
(echo You must find a way to make libgcc1.a
; false
)
937 # Compile the library of arithmetic subroutines with the native compiler.
938 # Don't compile it with GCC!
939 # (That would cause most arithmetic functions to call themselves.)
941 # NOTE: If you modify these rules substantially, please be sure to
942 # check at least config/i386/t-sco5 and possibly other makefile
944 libgcc1.a
: libgcc1.c
$(CONFIG_H
) $(LIB1FUNCS_EXTRA
) config.status
946 # Actually build it in tmplibgcc1.a, then rename at end,
947 # so that libgcc1.a itself remains nonexistent if compilation is aborted.
948 # -e causes any failing command to make this rule fail.
949 # -e doesn't work in certain shells, so we test $$? as well.
950 # lynx has a broken ar, it always complains when the initial library is
951 # empty, thus this command works only if we don't do -e
952 # There is a trailing backslash (\) deleted from the following line.
954 for name in
$(LIB1FUNCS
); \
957 rm -f
$${name}$(objext
); \
958 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -c
-DL
$${name} $(srcdir)/libgcc1.c
; \
959 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
960 mv libgcc1
$(objext
) $${name}$(objext
); \
961 $(OLDAR
) $(OLDAR_FLAGS
) tmplibgcc1.a
$${name}$(objext
); \
962 rm -f
$${name}$(objext
); \
964 # Some shells crash when a loop has no items.
965 # So make sure there is always at least one--`..'.
967 # We don't use -e here because there are if statements
968 # that should not make the command give up when the if condition is false.
969 # Instead, we test for failure after each command where it matters.
970 for file in ..
$(LIB1FUNCS_EXTRA
); \
972 if
[ x
$${file} != x..
]; then \
973 name
=`echo $${file} | sed -e 's/[.][cS]$$//' -e 's/[.]asm$$//'`; \
975 if
[ $${name}.asm
= $${file} ]; then \
976 cp
$${file} $${name}.s || exit
1; file
=$${name}.s
; \
978 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -c
$${file}; \
979 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
980 $(OLDAR
) $(OLDAR_FLAGS
) tmplibgcc1.a
$${name}$(objext
); \
981 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
982 rm -f
$${name}.s
$${name}$(objext
); \
986 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
987 $(RANLIB_FOR_TARGET
) tmplibgcc1.a
; \
989 mv tmplibgcc1.a libgcc1.a
991 # Build libgcc1.a from assembler source. LIB1ASMFUNCS is the list of
992 # functions. LIB1ASMSRC is the name of the source file in the config
994 libgcc1-asm.a
: libgcc2.ready config.status
$(srcdir)/config
/$(LIB1ASMSRC
)
995 -rm -f tmplibgcc1.a libgcc1.S
996 cp
$(srcdir)/config
/$(LIB1ASMSRC
) libgcc1.S
997 # Actually build it in tmplibgcc1.a, then rename at end,
998 # so that libgcc1-asm.a itself remains nonexistent if compilation is aborted.
999 # -e causes any failing command to make this rule fail.
1000 # -e doesn't work in certain shells, so we test $$? as well.
1001 # lynx has a broken ar, it always complains when the initial library is
1002 # empty, thus this command works only if we don't do -e
1003 # There is a trailing backslash (\) deleted from the following line.
1005 for name in
$(LIB1ASMFUNCS
); \
1008 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} libgcc1.S
; \
1009 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1010 mv libgcc1
$(objext
) $${name}$(objext
); \
1011 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc1.a
$${name}$(objext
); \
1012 rm -f
$${name}$(objext
); \
1015 mv tmplibgcc1.a libgcc1-asm.a
1017 # Generate assembly versions of the functions required for libgcc1.
1018 # You'll still need to massage the code by hand (possibly hacking
1019 # underscores and local labels) but this will get you started.
1020 libgcc1.S
: libgcc1.c
$(CONFIG_H
) config.status
1023 for name in
$(LIB1FUNCS
); \
1026 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -S
-DL
$${name} $(srcdir)/libgcc1.c
; \
1027 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1028 echo
'#ifdef ' L
$${name} >> libgcc1.S
; \
1029 cat libgcc1.s
>> libgcc1.S
; \
1030 echo
'#endif /*' L
$${name} '*/' >> libgcc1.S
; \
1031 echo
"" >> libgcc1.S
; \
1034 # Compiling libgcc2.a requires making sure that cc1, etc. have been compiled.
1035 # But recompiling cc1 should not force recompilation of libgcc2.a.
1036 # If you want to force recompilation, delete libgcc2.a.
1037 libgcc2.ready
: $(GCC_PASSES
) $(LIBGCC2_DEPS
) stmp-int-hdrs
$(STMP_FIXPROTO
)
1038 -if
[ -f libgcc2.ready
] ; then \
1041 touch libgcc2.ready
; \
1044 LIB2ADD
= $(srcdir)/frame.c
$(LIB2FUNCS_EXTRA
) $(LANG_LIB2FUNCS
)
1045 libgcc2.a
: libgcc2.c libgcc2.ready
$(CONFIG_H
) $(FPBIT
) $(DPBIT
) $(LIB2ADD
) \
1046 machmode.h longlong.h frame.h gbl-ctors.h config.status
1047 # Actually build it in tmplibgcc2.a, then rename at end,
1048 # so that libgcc2.a itself remains nonexistent if compilation is aborted.
1050 # -e causes any failing command to make this rule fail.
1051 # -e doesn't work in certain shells, so we test $$? as well.
1052 # lynx has a broken ar, it always complains when the initial library is
1053 # empty, thus this command works only if we don't do -e
1054 # There is a trailing backslash (\) deleted from the following line.
1056 for name in
$(LIB2FUNCS
); \
1059 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1060 $(MAYBE_USE_COLLECT2
) $(srcdir)/libgcc2.c
-o
$${name}$(objext
); \
1061 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1062 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1063 rm -f
$${name}$(objext
); \
1065 for name in
$(LIB2FUNCS_EH
); \
1068 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) -fexceptions
$(INCLUDES
) -c \
1069 -DL
$${name} $(srcdir)/libgcc2.c
-o
$${name}$(objext
); \
1070 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1071 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1072 rm -f
$${name}$(objext
); \
1074 if
[ x
$(FPBIT
) != x
]; then \
1075 for name in
$(FPBIT_FUNCS
); \
1078 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1079 -DFINE_GRAINED_LIBRARIES
$(FPBIT
) -o
$${name}$(objext
); \
1080 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1081 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1082 rm -f
$${name}$(objext
); \
1085 if
[ x
$(DPBIT
) != x
]; then \
1086 for name in
$(DPBIT_FUNCS
); \
1089 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1090 -DFINE_GRAINED_LIBRARIES
$(DPBIT
) -o
$${name}$(objext
); \
1091 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1092 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1093 rm -f
$${name}$(objext
); \
1096 # Some shells crash when a loop has no items.
1097 # So make sure there is always at least one--`..'.
1099 # We don't use -e here because there are if statements
1100 # that should not make the command give up when the if condition is false.
1101 # Instead, we test for failure after each command where it matters.
1102 for file in
$(LIB2ADD
); do \
1103 name
=`echo $${file} | sed -e 's/[.][cSo]$$//' -e 's/[.]asm$$//' -e 's/[.]txt$$//'`; \
1104 oname
=` echo $${name} | sed -e 's,.*/,,'`; \
1105 if
[ $${name}.txt
= $${file} ]; then \
1106 for f in ..
`cat $${file}`; do if
[ x
$${f} != x..
]; then \
1107 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1108 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1109 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" CC
="$(CC)" \
1110 CFLAGS
="$(CFLAGS)" HOST_PREFIX
="$(HOST_PREFIX)" \
1111 HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1112 LANGUAGES
="$(LANGUAGES)" \
1113 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $${f}; \
1114 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1115 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${f}; \
1121 if
[ $${name}.asm
= $${file} ]; then \
1122 cp
$${file} $${name}.s || exit
1; file
=$${name}.s
; \
1124 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
$${file}; \
1125 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1126 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${oname}$(objext
); \
1127 rm -f
$${name}.s
$${oname}$(objext
); \
1130 mv tmplibgcc2.a libgcc2.a
1131 # These lines were deleted from above the mv command
1132 # because ranlibing libgcc.a itself should suffice.
1133 # -if [ x${HPUX_GAS} = x ] ; then \
1134 # if $(RANLIB_TEST_FOR_TARGET) ; then \
1135 # $(RANLIB_FOR_TARGET) tmplibgcc2.a;
1139 # Combine the various libraries into a single library, libgcc.a.
1140 libgcc.a
: $(LIBGCC1
) $(LIBGCC2
)
1141 -rm -rf tmplibgcc.a libgcc.a tmpcopy
1143 -if
[ x
$(LIBGCC1
) != x
]; \
1144 then
(cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC1
)); \
1147 # Some versions of ar (specifically the one in RISC/os 5.x), create an
1148 # unwritable table of contents file, and then print an error message when
1149 # the second ar command tries to overwrite this file. To avoid the error
1150 # message from ar, we make sure all files are writable.
1151 -(cd tmpcopy
; chmod
+w
* > /dev
/null
2>&1)
1152 (cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC2
))
1153 (cd tmpcopy
; $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) ..
/tmplibgcc.a
*$(objext
))
1155 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
1156 $(RANLIB_FOR_TARGET
) tmplibgcc.a
; \
1158 # Actually build it in tmplibgcc.a, then rename at end,
1159 # so that libgcc.a itself remains nonexistent if compilation is aborted.
1160 mv tmplibgcc.a libgcc.a
1162 # Use the genmultilib shell script to generate the information the gcc
1163 # driver program needs to select the library directory based on the
1165 multilib.h
: s-mlib
; @true
1166 s-mlib
: $(srcdir)/genmultilib Makefile
1167 $(SHELL
) $(srcdir)/genmultilib \
1168 "$(MULTILIB_OPTIONS)" \
1169 "$(MULTILIB_DIRNAMES)" \
1170 "$(MULTILIB_MATCHES)" \
1171 "$(MULTILIB_EXCEPTIONS)" \
1172 "$(MULTILIB_EXTRA_OPTS)" > tmp-mlib.h
1173 $(srcdir)/move-if-change tmp-mlib.h multilib.h
1176 # Build multiple copies of libgcc.a, one for each target switch.
1177 stmp-multilib
: $(LIBGCC1
) libgcc2.c libgcc2.ready
$(CONFIG_H
) \
1179 $(LIB2ADD
) machmode.h longlong.h gbl-ctors.h config.status
1180 for i in
`$(GCC_FOR_TARGET) --print-multi-lib`; do \
1181 dir=`echo $$i | sed -e 's/;.*$$//'`; \
1182 flags
=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
1183 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1184 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1185 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1186 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1187 RANLIB_FOR_TARGET
="$(RANLIB_FOR_TARGET)" \
1188 RANLIB_TEST_FOR_TARGET
="$(RANLIB_TEST_FOR_TARGET)" \
1189 LANGUAGES
="$(LANGUAGES)" \
1190 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1191 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS) $${flags}" \
1192 MULTILIB_CFLAGS
="$${flags}" \
1193 LIBGCC1
="$(LIBGCC1)" LIBGCC2
="$(LIBGCC2)" \
1194 dir="$${dir}" stmp-multilib-sub
; \
1195 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1199 # Subroutine of stmp-multilib so make -n works.
1202 if
[ -d
$(dir) ]; then \
1204 rm -f libgcc.a
$(EXTRA_MULTILIB_PARTS
); \
1207 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1208 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1209 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1210 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1211 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1212 LANGUAGES
="$(LANGUAGES)" \
1213 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $(LIBGCC2
)
1214 if
[ x
$(LIBGCC1
) != xlibgcc1-asm.a
]; \
1216 else rm -f
$(LIBGCC1
); \
1218 if
[ x
$(LIBGCC1
) != xlibgcc1-asm.a
]; \
1221 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1222 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1223 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1224 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1225 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1226 LANGUAGES
="$(LANGUAGES)" \
1227 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $(LIBGCC1
); \
1229 rm -rf tmplibgcc.a tmpcopy
1231 if
[ x
$(LIBGCC1
) != x
]; \
1232 then
(cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC1
)); \
1235 # Some versions of ar (specifically the one in RISC/os 5.x), create an
1236 # unwritable table of contents file, and then print an error message when
1237 # the second ar command tries to overwrite this file. To avoid the error
1238 # message from ar, we make sure all files are writable.
1239 -(cd tmpcopy
; chmod
+w
* > /dev
/null
2>&1)
1240 (cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC2
))
1241 (cd tmpcopy
; $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) ..
/tmplibgcc.a
*$(objext
))
1242 rm -rf libgcc2.a tmpcopy
1243 if
$(RANLIB_TEST_FOR_TARGET
) ; then \
1244 $(RANLIB_FOR_TARGET
) tmplibgcc.a
; \
1246 if
[ -d
$(dir) ]; then true
; else mkdir
$(dir); fi
1247 mv tmplibgcc.a
$(dir)/libgcc.a
1248 for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
1249 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1250 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1251 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1252 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1253 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1254 LANGUAGES
="$(LANGUAGES)" \
1255 MULTILIB_CFLAGS
="$(MULTILIB_CFLAGS)" T
="t" t
$${f}; \
1256 mv t
$${f} $(dir)/$${f}; \
1260 # Compile two additional files that are linked with every program
1261 # linked using GCC on systems using COFF or ELF, for the sake of C++
1263 $(T
)crtbegin.o
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1264 defaults.h frame.h gbl-ctors.h
1265 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(MULTILIB_CFLAGS
) -g0 \
1266 -finhibit-size-directive
-fno-inline-functions
-fno-exceptions
$(CRTSTUFF_T_CFLAGS
) \
1267 -c
$(srcdir)/crtstuff.c
-DCRT_BEGIN
-o
$(T
)crtbegin
$(objext
)
1269 $(T
)crtend.o
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1270 defaults.h frame.h gbl-ctors.h
1271 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(MULTILIB_CFLAGS
) -g0 \
1272 -finhibit-size-directive
-fno-inline-functions
-fno-exceptions
$(CRTSTUFF_T_CFLAGS
) \
1273 -c
$(srcdir)/crtstuff.c
-DCRT_END
-o
$(T
)crtend
$(objext
)
1275 # On some systems we also want to install versions of these files
1276 # compiled using PIC for use in shared libraries.
1277 crtbeginS.o crtendS.o
: s-crtS
; @true
1279 s-crtS
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1280 defaults.h frame.h gbl-ctors.h
1281 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(CRTSTUFF_T_CFLAGS_S
) \
1282 -DCRT_BEGIN
-DCRTSTUFFS_O
-finhibit-size-directive
-fno-inline-functions \
1283 -fno-exceptions
-g0
-c
$(srcdir)/crtstuff.c
1284 mv crtstuff
$(objext
) crtbeginS
$(objext
)
1285 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(CRTSTUFF_T_CFLAGS_S
) \
1286 -DCRT_END
-DCRTSTUFFS_O
-finhibit-size-directive
-fno-inline-functions \
1287 -fno-exceptions
-g0
-c
$(srcdir)/crtstuff.c
-o crtendS
$(objext
)
1290 # Compile the start modules crt0.o and mcrt0.o that are linked with every program
1291 crt0.o
: s-crt0
; @true
1292 mcrt0.o
: s-crt0
; @true
1294 s-crt0
: $(CRT0_S
) $(MCRT0_S
) $(GCC_PASSES
) $(CONFIG_H
)
1295 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(CRT0STUFF_T_CFLAGS
) \
1296 -o crt0.o
-c
$(CRT0_S
)
1297 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(CRT0STUFF_T_CFLAGS
) \
1298 -o mcrt0.o
-c
$(MCRT0_S
)
1301 # Compiling object files from source files.
1303 # Note that dependencies on obstack.h are not written
1304 # because that file is not part of GCC.
1306 # C language specific files.
1308 c-parse.o
: $(srcdir)/c-parse.c
$(CONFIG_H
) $(TREE_H
) c-lex.h \
1309 $(srcdir)/c-parse.h c-tree.h c-common.h input.h flags.h system.h toplev.h
1310 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c
$(srcdir)/c-parse.c
1311 $(srcdir)/c-parse.h
: $(srcdir)/c-parse.c
1312 $(srcdir)/c-parse.c
: $(srcdir)/c-parse.y
1313 cd
$(srcdir); $(BISON
) $(BISONFLAGS
) -d
-o c-parse.c c-parse.y
1314 $(srcdir)/c-parse.y
: c-parse.in
1315 echo
'/*WARNING: This file is automatically generated!*/' >tmp-c-parse.y
1316 sed
-e
"/^ifobjc$$/,/^end ifobjc$$/d" \
1317 -e
"/^ifc$$/d" -e
"/^end ifc$$/d" \
1318 $(srcdir)/c-parse.in
>>tmp-c-parse.y
1319 $(srcdir)/move-if-change tmp-c-parse.y
$(srcdir)/c-parse.y
1321 $(srcdir)/c-gperf.h
: c-parse.gperf
1322 gperf
-L C
-F
', 0, 0' -p
-j1
-i
1 -g
-o
-t
-G
-N is_reserved_word \
1323 -k1
,3,$$ $(srcdir)/c-parse.gperf
>tmp-gperf.h
1324 $(srcdir)/move-if-change tmp-gperf.h
$(srcdir)/c-gperf.h
1326 c-decl.o
: c-decl.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-common.h \
1327 c-lex.h flags.h function.h output.h toplev.h defaults.h
1328 c-typeck.o
: c-typeck.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-common.h \
1329 flags.h intl.h output.h
$(EXPR_H
) $(RTL_H
) toplev.h
1330 c-lang.o
: c-lang.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-common.h \
1331 c-lex.h toplev.h output.h
1332 c-lex.o
: c-lex.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) c-lex.h c-tree.h \
1333 c-common.h
$(srcdir)/c-parse.h
$(srcdir)/c-gperf.h c-pragma.h input.h \
1334 intl.h flags.h toplev.h output.h mbchar.h
1335 c-aux-info.o
: c-aux-info.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h \
1336 c-common.h flags.h toplev.h
1337 c-convert.o
: c-convert.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h toplev.h
1338 c-pragma.o
: c-pragma.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) function.h \
1339 defaults.h c-pragma.h toplev.h
1340 c-iterate.o
: c-iterate.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) c-tree.h \
1341 c-common.h flags.h toplev.h
$(EXPR_H
)
1342 mbchar.o
: mbchar.c
$(CONFIG_H
) system.h mbchar.h
1343 graph.o
: graph.c
$(CONFIG_H
) system.h toplev.h flags.h output.h
$(RTL_H
) \
1344 function.h hard-reg-set.h
$(BASIC_BLOCK_H
)
1345 sbitmap.o
: sbitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h
$(BASIC_BLOCK_H
)
1347 COLLECT2_OBJS
= collect2.o tlink.o hash.o intl.o underscore.o version.o
1348 collect2
$(exeext
): $(COLLECT2_OBJS
) $(LIBDEPS
)
1349 # Don't try modifying collect2 (aka ld) in place--it might be linking this.
1350 -rm -f collect2
$(exeext
)
1351 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(COLLECT2_OBJS
) $(LIBS
)
1353 collect2.o
: collect2.c
$(CONFIG_H
) system.h gstab.h intl.h \
1354 $(srcdir)/..
/include/obstack.h
$(DEMANGLE_H
) collect2.h
1355 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1356 -DTARGET_MACHINE
=\"$(target_alias
)\" $(MAYBE_USE_COLLECT2
) \
1357 -c
`echo $(srcdir)/collect2.c | sed 's,^\./,,'`
1359 tlink.o
: tlink.c
$(DEMANGLE_H
) hash.h
$(CONFIG_H
) system.h toplev.h collect2.h
1360 hash.o
: hash.c hash.h system.h toplev.h
1362 vfprintf.o
: $(srcdir)/..
/libiberty
/vfprintf.c
$(CONFIG_H
) system.h
1364 $(LN_S
) $(srcdir)/..
/libiberty
/vfprintf.c vfprintf.c
1365 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) vfprintf.c
1367 splay-tree.o
: $(srcdir)/..
/libiberty
/splay-tree.c \
1368 $(srcdir)/..
/include/splay-tree.h
$(srcdir)/..
/include/libiberty.h
1370 $(LN_S
) $(srcdir)/..
/libiberty
/splay-tree.c splay-tree.c
1371 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) splay-tree.c
1373 underscore.c
: s-under
; @true
1375 s-under
: $(GCC_PASSES
)
1376 echo
"int xxy_us_dummy;" >tmp-dum.c
1377 $(GCC_FOR_TARGET
) -S tmp-dum.c
1378 echo
'/*WARNING: This file is automatically generated!*/' >tmp-under.c
1379 if grep _xxy_us_dummy tmp-dum.s
> /dev
/null
; then \
1380 echo
"int prepends_underscore = 1;" >>tmp-under.c
; \
1382 echo
"int prepends_underscore = 0;" >>tmp-under.c
; \
1384 $(srcdir)/move-if-change tmp-under.c underscore.c
1385 -rm -f tmp-dum.c tmp-dum.s
1388 # A file used by all variants of C.
1390 c-common.o
: c-common.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-lex.h \
1391 c-common.h flags.h toplev.h output.h c-pragma.h
$(RTL_H
)
1393 # Language-independent files.
1396 -DSTANDARD_STARTFILE_PREFIX
=\"$(libdir)/\" \
1397 -DSTANDARD_EXEC_PREFIX
=\"$(libdir)/gcc-lib
/\" \
1398 -DDEFAULT_TARGET_VERSION
=\"$(version
)\" \
1399 -DDEFAULT_TARGET_MACHINE
=\"$(target_alias
)\" \
1400 -DTOOLDIR_BASE_PREFIX
=\"$(exec_prefix)/\"
1401 gcc.o
: gcc.c
$(CONFIG_H
) system.h intl.h multilib.h \
1402 Makefile
$(lang_specs_files
) prefix.h
1403 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1405 -c
`echo $(srcdir)/gcc.c | sed 's,^\./,,'`
1407 gccspec.o
: gccspec.c
$(CONFIG_H
) system.h
1408 cppspec.o
: cppspec.c
$(CONFIG_H
) system.h
1410 tree-check.h
: s-check
; @true
1411 s-check
: gencheck
$(srcdir)/move-if-change
1412 .
/gencheck
> tmp-check.h
1413 $(srcdir)/move-if-change tmp-check.h tree-check.h
1416 gencheck
: gencheck.o
$(lang_tree_files
) $(HOST_LIBDEPS
)
1417 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1418 gencheck.o
$(HOST_LIBS
)
1420 gencheck.o
: gencheck.c tree.def
$(CONFIG_H
) hconfig.h system.h
1421 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) \
1422 $(srcdir)/gencheck.c
1424 dumpvers
: dumpvers.c
1426 version.o
: version.c
1427 obstack.o
: $(srcdir)/..
/libiberty
/obstack.c
$(CONFIG_H
)
1429 $(LN_S
) $(srcdir)/..
/libiberty
/obstack.c obstack.c
1430 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) obstack.c
1432 prefix.o
: prefix.c
$(CONFIG_H
) system.h Makefile
prefix.h
1433 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1434 -DPREFIX
=\"$(prefix)\" \
1435 -c
`echo $(srcdir)/prefix.c | sed 's,^\./,,'`
1437 convert.o
: convert.c
$(CONFIG_H
) $(TREE_H
) flags.h convert.h toplev.h
1439 tree.o
: tree.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h function.h toplev.h
1440 print-tree.o
: print-tree.c
$(CONFIG_H
) system.h
$(TREE_H
)
1441 stor-layout.o
: stor-layout.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h \
1442 function.h
$(EXPR_H
) $(RTL_H
) toplev.h
1443 fold-const.o
: fold-const.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h toplev.h \
1445 toplev.o
: toplev.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) function.h \
1446 flags.h input.h insn-attr.h xcoffout.h defaults.h output.h \
1447 insn-codes.h insn-config.h intl.h
$(RECOG_H
) Makefile toplev.h dwarfout.h \
1448 dwarf2out.h sdbout.h dbxout.h
$(EXPR_H
) $(BASIC_BLOCK_H
) \
1449 $(lang_options_files
)
1450 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(MAYBE_USE_COLLECT2
) \
1451 -DTARGET_NAME
=\"$(target_alias
)\" \
1452 -c
`echo $(srcdir)/toplev.c | sed 's,^\./,,'`
1454 rtl.o
: rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h
1456 print-rtl.o
: print-rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h basic-block.h
1457 rtlanal.o
: rtlanal.c
$(CONFIG_H
) system.h
$(RTL_H
)
1458 errors.o
: errors.c
$(CONFIG_H
) system.h errors.h
1460 varasm.o
: varasm.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h \
1461 function.h defaults.h
$(EXPR_H
) hard-reg-set.h
$(REGS_H
) \
1462 xcoffout.h output.h c-pragma.h toplev.h dbxout.h sdbout.h
1463 function.o
: function.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1464 function.h insn-flags.h insn-codes.h
$(EXPR_H
) $(REGS_H
) hard-reg-set.h \
1465 insn-config.h
$(RECOG_H
) output.h toplev.h except.h hash.h
1466 stmt.o
: stmt.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h function.h \
1467 insn-flags.h insn-config.h insn-codes.h hard-reg-set.h
$(EXPR_H
) except.h \
1468 loop.h
$(RECOG_H
) toplev.h output.h varray.h
1469 except.o
: except.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1470 function.h insn-flags.h
$(EXPR_H
) $(REGS_H
) hard-reg-set.h \
1471 insn-config.h
$(RECOG_H
) output.h except.h toplev.h intl.h
1472 expr.o
: expr.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h function.h \
1473 $(REGS_H
) insn-flags.h insn-codes.h
$(EXPR_H
) insn-config.h
$(RECOG_H
) \
1474 output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h except.h
1475 builtins.o
: builtins.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1476 function.h
$(REGS_H
) insn-flags.h insn-codes.h
$(EXPR_H
) insn-config.h \
1477 $(RECOG_H
) output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h \
1479 calls.o
: calls.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h
$(EXPR_H
) \
1480 insn-flags.h
$(REGS_H
) toplev.h output.h
1481 expmed.o
: expmed.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1482 insn-flags.h insn-config.h insn-codes.h
$(EXPR_H
) $(RECOG_H
) real.h toplev.h
1483 explow.o
: explow.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1484 hard-reg-set.h insn-config.h
$(EXPR_H
) $(RECOG_H
) insn-flags.h \
1485 insn-codes.h toplev.h
1486 optabs.o
: optabs.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1487 insn-flags.h insn-config.h insn-codes.h
$(EXPR_H
) $(RECOG_H
) reload.h \
1489 dbxout.o
: dbxout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h
$(REGS_H
) \
1490 insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h dbxout.h \
1492 sdbout.o
: sdbout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h except.h \
1493 function.h
$(EXPR_H
) output.h hard-reg-set.h
$(REGS_H
) defaults.h real.h \
1494 insn-config.h
$(srcdir)/..
/include/obstack.h xcoffout.h c-pragma.h \
1496 dwarfout.o
: dwarfout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) dwarf.h \
1497 flags.h insn-config.h reload.h output.h defaults.h toplev.h dwarfout.h
1498 dwarf2out.o
: dwarf2out.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) dwarf2.h \
1499 flags.h insn-config.h reload.h output.h defaults.h \
1500 hard-reg-set.h
$(REGS_H
) $(EXPR_H
) toplev.h dwarf2out.h dyn-string.h
1501 xcoffout.o
: xcoffout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) xcoffout.h \
1502 flags.h toplev.h output.h dbxout.h
1503 emit-rtl.o
: emit-rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1504 function.h
$(REGS_H
) insn-config.h
$(RECOG_H
) real.h \
1505 $(EXPR_H
) $(srcdir)/..
/include/obstack.h hard-reg-set.h bitmap.h toplev.h
1506 real.o
: real.c
$(CONFIG_H
) system.h
$(TREE_H
) toplev.h
1508 integrate.o
: integrate.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1509 integrate.h insn-flags.h insn-config.h
$(EXPR_H
) real.h
$(REGS_H
) \
1510 intl.h function.h output.h
$(RECOG_H
) except.h toplev.h
1512 jump.o
: jump.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h hard-reg-set.h
$(REGS_H
) \
1513 insn-config.h insn-flags.h
$(RECOG_H
) $(EXPR_H
) real.h except.h function.h \
1514 toplev.h insn-attr.h
1515 stupid.o
: stupid.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h \
1516 $(BASIC_BLOCK_H
) insn-config.h reload.h flags.h function.h toplev.h
1518 cse.o
: cse.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h flags.h \
1519 real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) toplev.h output.h function.h \
1520 $(srcdir)/..
/include/splay-tree.h
1521 gcse.o
: gcse.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h \
1522 flags.h real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) $(BASIC_BLOCK_H
) \
1523 function.h output.h toplev.h
1524 resource.o
: resource.c
$(CONFIG_H
) $(RTL_H
) hard-reg-set.h system.h \
1525 $(BASIC_BLOCK_H
) $(REGS_H
) flags.h output.h resource.h function.h toplev.h
1526 lcm.o
: lcm.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h flags.h \
1527 real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) $(BASIC_BLOCK_H
)
1528 profile.o
: profile.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h insn-flags.h \
1529 gcov-io.h
$(TREE_H
) output.h
$(REGS_H
) toplev.h function.h insn-config.h
1530 loop.o
: loop.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h loop.h insn-config.h \
1531 insn-flags.h
$(REGS_H
) hard-reg-set.h
$(RECOG_H
) $(EXPR_H
) real.h \
1532 function.h toplev.h varray.h
1533 unroll.o
: unroll.c
$(CONFIG_H
) system.h
$(RTL_H
) insn-config.h function.h \
1534 integrate.h
$(REGS_H
) $(RECOG_H
) flags.h
$(EXPR_H
) loop.h toplev.h varray.h
1535 flow.o
: flow.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h insn-config.h \
1536 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h output.h toplev.h recog.h \
1537 insn-flags.h function.h
1538 combine.o
: combine.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h function.h \
1539 insn-config.h insn-flags.h insn-codes.h insn-attr.h
$(REGS_H
) $(EXPR_H
) \
1540 $(BASIC_BLOCK_H
) $(RECOG_H
) real.h hard-reg-set.h toplev.h
1541 regclass.o
: regclass.c
$(CONFIG_H
) system.h
$(RTL_H
) hard-reg-set.h flags.h \
1542 $(BASIC_BLOCK_H
) $(REGS_H
) insn-config.h
$(RECOG_H
) reload.h real.h \
1543 toplev.h function.h output.h
1544 local-alloc.o
: local-alloc.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1545 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h insn-config.h
$(RECOG_H
) \
1546 output.h function.h insn-attr.h toplev.h
1547 bitmap.o
: bitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h
$(BASIC_BLOCK_H
) \
1549 global.o
: global.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h reload.h function.h \
1550 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h insn-config.h output.h toplev.h
1551 varray.o
: varray.c
$(CONFIG_H
) system.h varray.h
$(RTL_H
) $(TREE_H
) bitmap.h
1553 reload.o
: reload.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h output.h
$(EXPR_H
) \
1554 reload.h
$(RECOG_H
) hard-reg-set.h insn-config.h insn-codes.h
$(REGS_H
) \
1555 function.h real.h toplev.h
1556 reload1.o
: reload1.c
$(CONFIG_H
) system.h
$(RTL_H
) real.h flags.h
$(EXPR_H
) \
1557 reload.h
$(REGS_H
) hard-reg-set.h insn-config.h insn-flags.h insn-codes.h \
1558 $(BASIC_BLOCK_H
) $(RECOG_H
) output.h function.h toplev.h
1559 caller-save.o
: caller-save.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1560 $(REGS_H
) hard-reg-set.h insn-config.h
$(BASIC_BLOCK_H
) function.h \
1561 $(RECOG_H
) reload.h
$(EXPR_H
) toplev.h
1562 reorg.o
: reorg.c
$(CONFIG_H
) system.h
$(RTL_H
) conditions.h hard-reg-set.h \
1563 $(BASIC_BLOCK_H
) $(REGS_H
) insn-config.h insn-attr.h insn-flags.h \
1564 $(RECOG_H
) function.h flags.h output.h
$(EXPR_H
) toplev.h
1565 alias.o
: alias.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h hard-reg-set.h \
1566 $(REGS_H
) toplev.h output.h
$(EXPR_H
)
1567 regmove.o
: regmove.c
$(CONFIG_H
) system.h
$(RTL_H
) insn-config.h \
1568 $(RECOG_H
) output.h reload.h
$(REGS_H
) hard-reg-set.h flags.h function.h \
1569 $(EXPR_H
) insn-flags.h
$(BASIC_BLOCK_H
) toplev.h
1570 haifa-sched.o
: haifa-sched.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1571 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h flags.h insn-config.h function.h \
1572 insn-attr.h toplev.h recog.h
1573 final.o
: final.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h intl.h \
1574 $(REGS_H
) $(RECOG_H
) conditions.h insn-config.h insn-attr.h function.h \
1575 real.h output.h hard-reg-set.h insn-flags.h insn-codes.h gstab.h except.h \
1576 xcoffout.h defaults.h toplev.h reload.h dwarfout.h dwarf2out.h sdbout.h \
1578 recog.o
: recog.c
$(CONFIG_H
) system.h
$(RTL_H
) function.h \
1579 $(REGS_H
) $(RECOG_H
) hard-reg-set.h flags.h insn-config.h insn-attr.h \
1580 insn-flags.h insn-codes.h real.h toplev.h output.h resource.h
1581 reg-stack.o
: reg-stack.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) recog.h \
1582 $(REGS_H
) hard-reg-set.h flags.h insn-config.h insn-flags.h toplev.h \
1584 dyn-string.o
: dyn-string.c dyn-string.h
$(CONFIG_H
) system.h
1585 lists.o
: lists.c
$(CONFIG_H
) system.h toplev.h
$(RTL_H
)
1587 $(out_object_file
): $(out_file
) $(CONFIG_H
) $(TREE_H
) \
1588 $(RTL_H
) $(REGS_H
) hard-reg-set.h real.h insn-config.h conditions.h \
1589 insn-flags.h output.h insn-attr.h insn-codes.h system.h toplev.h function.h
1590 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(out_file
)
1592 # Build auxiliary files that support ecoff format.
1593 mips-tfile
: mips-tfile.o version.o
$(LIBDEPS
)
1594 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ mips-tfile.o version.o
$(LIBS
)
1596 mips-tfile.o
: mips-tfile.c
$(CONFIG_H
) $(RTL_H
) system.h machmode.h
1598 mips-tdump
: mips-tdump.o version.o
$(LIBDEPS
)
1599 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ mips-tdump.o version.o
$(LIBS
)
1601 mips-tdump.o
: mips-tdump.c
$(CONFIG_H
) $(RTL_H
) system.h
1603 # Build file to support OSF/rose half-pic format.
1604 halfpic.o
: halfpic.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) system.h
1606 # Normally this target is not used; but it is used if you
1607 # define ALLOCA=alloca.o. In that case, you must get a suitable alloca.c
1608 # from the GNU Emacs distribution.
1609 alloca.o
: $(srcdir)/..
/libiberty
/alloca.c
1611 $(LN_S
) $(srcdir)/..
/libiberty
/alloca.c alloca.c
1612 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(ALLOCA_FLAGS
) \
1613 -c
`echo alloca.c | sed 's,^\./,,'`
1616 # Generate header and source files from the machine description,
1619 .PRECIOUS
: insn-config.h insn-flags.h insn-codes.h \
1620 insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c \
1621 insn-attr.h insn-attrtab.c
1623 # The following pair of rules has this effect:
1624 # genconfig is run only if the md has changed since genconfig was last run;
1625 # but the file insn-config.h is touched only when its contents actually change.
1627 # Each of the other insn-* files is handled by a similar pair of rules.
1629 # This causes an anomaly in the results of make -n
1630 # because insn-* is older than s-*
1631 # and thus make -n thinks that insn-* will be updated
1632 # and force recompilation of things that depend on it.
1633 # We use move-if-change precisely to avoid such recompilation.
1634 # But there is no way to teach make -n that it will be avoided.
1636 # Each of the insn-*.[ch] rules has a semicolon at the end,
1637 # for otherwise the system Make on SunOS 4.1 never tries
1638 # to recompile insn-*.o. To avoid problems and extra noise from
1639 # versions of make which don't like empty commands (nothing after the
1640 # trailing `;'), we call true for each.
1642 insn-config.h
: s-config
; @true
1643 s-config
: $(md_file
) genconfig
$(srcdir)/move-if-change
1644 .
/genconfig
$(md_file
) > tmp-config.h
1645 $(srcdir)/move-if-change tmp-config.h insn-config.h
1648 insn-flags.h
: s-flags
; @true
1649 s-flags
: $(md_file
) genflags
$(srcdir)/move-if-change
1650 .
/genflags
$(md_file
) > tmp-flags.h
1651 $(srcdir)/move-if-change tmp-flags.h insn-flags.h
1654 insn-codes.h
: s-codes
; @true
1655 s-codes
: $(md_file
) gencodes
$(srcdir)/move-if-change
1656 .
/gencodes
$(md_file
) > tmp-codes.h
1657 $(srcdir)/move-if-change tmp-codes.h insn-codes.h
1660 insn-emit.o
: insn-emit.c
$(CONFIG_H
) $(RTL_H
) $(EXPR_H
) real.h output.h \
1661 insn-config.h insn-flags.h insn-codes.h system.h reload.h recog.h function.h
1662 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-emit.c
1664 insn-emit.c
: s-emit
; @true
1665 s-emit
: $(md_file
) genemit
$(srcdir)/move-if-change
1666 .
/genemit
$(md_file
) > tmp-emit.c
1667 $(srcdir)/move-if-change tmp-emit.c insn-emit.c
1670 insn-recog.o
: insn-recog.c
$(CONFIG_H
) $(RTL_H
) insn-config.h
$(RECOG_H
) \
1671 real.h output.h flags.h system.h function.h
1672 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-recog.c
1674 insn-recog.c
: s-recog
; @true
1675 s-recog
: $(md_file
) genrecog
$(srcdir)/move-if-change
1676 .
/genrecog
$(md_file
) > tmp-recog.c
1677 $(srcdir)/move-if-change tmp-recog.c insn-recog.c
1680 insn-opinit.o
: insn-opinit.c
$(CONFIG_H
) $(RTL_H
) insn-codes.h insn-flags.h \
1681 insn-config.h flags.h
$(RECOG_H
) $(EXPR_H
) reload.h system.h
1682 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-opinit.c
1684 insn-opinit.c
: s-opinit
; @true
1685 s-opinit
: $(md_file
) genopinit
$(srcdir)/move-if-change
1686 .
/genopinit
$(md_file
) > tmp-opinit.c
1687 $(srcdir)/move-if-change tmp-opinit.c insn-opinit.c
1690 insn-extract.o
: insn-extract.c
$(CONFIG_H
) $(RTL_H
) system.h toplev.h \
1691 insn-config.h recog.h
1692 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-extract.c
1694 insn-extract.c
: s-extract
; @true
1695 s-extract
: $(md_file
) genextract
$(srcdir)/move-if-change
1696 .
/genextract
$(md_file
) > tmp-extract.c
1697 $(srcdir)/move-if-change tmp-extract.c insn-extract.c
1700 insn-peep.o
: insn-peep.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) output.h real.h \
1701 system.h insn-config.h recog.h
1702 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-peep.c
1704 insn-peep.c
: s-peep
; @true
1705 s-peep
: $(md_file
) genpeep
$(srcdir)/move-if-change
1706 .
/genpeep
$(md_file
) > tmp-peep.c
1707 $(srcdir)/move-if-change tmp-peep.c insn-peep.c
1710 insn-attrtab.o
: insn-attrtab.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) real.h \
1711 output.h insn-attr.h insn-config.h system.h toplev.h
1712 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-attrtab.c
1714 insn-attr.h
: s-attr
; @true
1715 s-attr
: $(md_file
) genattr
$(srcdir)/move-if-change
1716 .
/genattr
$(md_file
) > tmp-attr.h
1717 $(srcdir)/move-if-change tmp-attr.h insn-attr.h
1720 insn-attrtab.c
: s-attrtab
; @true
1721 s-attrtab
: $(md_file
) genattrtab
$(srcdir)/move-if-change
1722 .
/genattrtab
$(md_file
) > tmp-attrtab.c
1723 $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c
1726 insn-output.o
: insn-output.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) real.h conditions.h \
1727 hard-reg-set.h insn-config.h insn-flags.h insn-attr.h output.h
$(RECOG_H
) \
1728 function.h insn-codes.h system.h
1729 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-output.c
1731 insn-output.c
: s-output
; @true
1732 s-output
: $(md_file
) genoutput
$(srcdir)/move-if-change
1733 .
/genoutput
$(md_file
) > tmp-output.c
1734 $(srcdir)/move-if-change tmp-output.c insn-output.c
1737 genrtl.o
: genrtl.c
$(CONFIG_H
) $(RTL_H
) system.h
1738 genrtl.c genrtl.h
: s-genrtl
1739 @true
# force gnu make to recheck modification times.
1741 s-genrtl
: gengenrtl
$(srcdir)/move-if-change
$(RTL_BASE_H
)
1742 .
/gengenrtl tmp-genrtl.h tmp-genrtl.c
1743 $(srcdir)/move-if-change tmp-genrtl.h genrtl.h
1744 $(srcdir)/move-if-change tmp-genrtl.c genrtl.c
1748 # Compile the programs that generate insn-* from the machine description.
1749 # They are compiled with $(HOST_CC), and associated libraries,
1750 # since they need to run on this machine
1751 # even if GCC is being compiled to run on some other machine.
1753 # $(CONFIG_H) is omitted from the deps of the gen*.o
1754 # because these programs don't really depend on anything
1755 # about the target machine. They do depend on config.h itself,
1756 # since that describes the host machine.
1758 # Pass the md file through cpp if the target requests it.
1759 $(MD_FILE
): $(MD_DEPS
)
1761 $(MD_CPP
) $(MD_CPPFLAGS
) $(md_file
) | sed
's/^# /; /g' > tmp-
$@
1764 genconfig
: genconfig.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1765 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1766 genconfig.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1768 genconfig.o
: genconfig.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1769 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genconfig.c
1771 genflags
: genflags.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1772 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1773 genflags.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1775 genflags.o
: genflags.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1776 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genflags.c
1778 gencodes
: gencodes.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1779 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1780 gencodes.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1782 gencodes.o
: gencodes.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1783 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gencodes.c
1785 genemit
: genemit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1786 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1787 genemit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1789 genemit.o
: genemit.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1790 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genemit.c
1792 genopinit
: genopinit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1793 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1794 genopinit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1796 genopinit.o
: genopinit.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1797 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genopinit.c
1799 genrecog
: genrecog.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1800 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1801 genrecog.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1803 genrecog.o
: genrecog.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1804 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genrecog.c
1806 genextract
: genextract.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1807 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1808 genextract.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1810 genextract.o
: genextract.c
$(RTL_H
) $(build_xm_file
) system.h insn-config.h errors.h
1811 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genextract.c
1813 genpeep
: genpeep.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1814 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1815 genpeep.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1817 genpeep.o
: genpeep.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1818 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genpeep.c
1820 genattr
: genattr.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1821 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1822 genattr.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1824 genattr.o
: genattr.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1825 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genattr.c
1827 genattrtab
: genattrtab.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_RTLANAL
) $(HOST_LIBDEPS
)
1828 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1829 genattrtab.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_RTLANAL
) $(HOST_LIBS
)
1831 genattrtab.o
: genattrtab.c
$(RTL_H
) $(build_xm_file
) system.h insn-config.h errors.h
1832 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genattrtab.c
1834 genoutput
: genoutput.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1835 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1836 genoutput.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1838 genoutput.o
: genoutput.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1839 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genoutput.c
1841 gengenrtl
: gengenrtl.o
$(HOST_LIBDEPS
)
1842 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1843 gengenrtl.o
$(HOST_LIBS
)
1845 gengenrtl.o
: gengenrtl.c
$(RTL_BASE_H
) system.h
1846 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gengenrtl.c
1849 # Compile the libraries to be used by gen*.
1850 # If we are not cross-building, gen* use the same .o's that cc1 will use,
1851 # and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict
1852 # with the rules for rtl.o, alloca.o, etc.
1853 $(HOST_PREFIX_1
)rtl.o
: $(srcdir)/rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h
1854 rm -f
$(HOST_PREFIX
)rtl.c
1855 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/rtl.c
> $(HOST_PREFIX
)rtl.c
1856 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)rtl.c
1858 $(HOST_PREFIX_1
)print-rtl.o
: $(srcdir)/print-rtl.c
$(CONFIG_H
) $(RTL_H
) \
1859 bitmap.h basic-block.h
1860 rm -f
$(HOST_PREFIX
)print-rtl.c
1861 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/print-rtl.c
> $(HOST_PREFIX
)print-rtl.c
1862 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)print-rtl.c
1864 $(HOST_PREFIX_1
)bitmap.o
: $(srcdir)/bitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1865 flags.h
$(BASIC_BLOCK_H
) $(REGS_H
)
1866 rm -f
$(HOST_PREFIX
)bitmap.c
1867 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/bitmap.c
> $(HOST_PREFIX
)bitmap.c
1868 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)bitmap.c
1870 $(HOST_PREFIX_1
)rtlanal.o
: $(srcdir)/rtlanal.c
$(CONFIG_H
) $(RTL_H
)
1871 rm -f
$(HOST_PREFIX
)rtlanal.c
1872 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/rtlanal.c
> $(HOST_PREFIX
)rtlanal.c
1873 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)rtlanal.c
1875 $(HOST_PREFIX_1
)alloca.o
: $(srcdir)/..
/libiberty
/alloca.c
1876 rm -f
$(HOST_PREFIX
)alloca.c
1877 $(LN_S
) $(srcdir)/..
/libiberty
/alloca.c
$(HOST_PREFIX
)alloca.c
1878 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)alloca.c
1880 $(HOST_PREFIX_1
)obstack.o
: $(srcdir)/..
/libiberty
/obstack.c
1881 rm -f
$(HOST_PREFIX
)obstack.c
1882 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/..
/libiberty
/obstack.c
> $(HOST_PREFIX
)obstack.c
1883 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)obstack.c
1885 $(HOST_PREFIX_1
)vfprintf.o
: $(srcdir)/..
/libiberty
/vfprintf.c
1886 rm -f
$(HOST_PREFIX
)vfprintf.c
1887 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/..
/libiberty
/vfprintf.c
> $(HOST_PREFIX
)vfprintf.c
1888 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)vfprintf.c
1890 $(HOST_PREFIX_1
)doprint.o
: doprint.c
1891 rm -f
$(HOST_PREFIX
)doprint.c
1892 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/doprint.c
> $(HOST_PREFIX
)doprint.c
1893 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)doprint.c
1895 $(HOST_PREFIX_1
)malloc.o
: malloc.c
1896 rm -f
$(HOST_PREFIX
)malloc.c
1897 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/malloc.c
> $(HOST_PREFIX
)malloc.c
1898 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)malloc.c
1900 $(HOST_PREFIX_1
)errors.o
: errors.c
1901 rm -f
$(HOST_PREFIX
)errors.c
1902 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/errors.c
> $(HOST_PREFIX
)errors.c
1903 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)errors.c
1906 # This satisfies the dependency that we get if you cross-compile a compiler
1907 # that does not need to compile alloca, malloc or whatever.
1909 touch
$(HOST_PREFIX_1
)
1913 # Remake internationalization support.
1915 intl.o
: intl.c intl.h gansidecl.h Makefile
1916 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1917 -DLOCALEDIR
=\"$(localedir
)\" \
1918 -c
`echo $(srcdir)/intl.c | sed 's,^\./,,'`
1920 # This is needed to when doing a partial build after a `make clean'.
1921 # libintl.a does not depend on intl.all,
1922 # as that would force a lot of recompiling.
1923 $(top_builddir
)/intl
/libintl.a
:
1924 @echo
"$(MAKE) intl.all"
1925 @
$(MAKE
) $(FLAGS_TO_PASS
) intl.
all
1927 # Make sure all the headers are there for xgettext to scan.
1928 $(INTL_TARGETS
): $(srcdir)/c-gperf.h \
1929 $(srcdir)/c-parse.c
$(srcdir)/c-parse.h
$(srcdir)/cexp.c
1931 intl.
all intl.
install intl.
uninstall intl.distdir \
1932 intl.
mostlyclean intl.
clean intl.
distclean intl.maintainer-clean
:
1933 @for d in
$(INTL_SUBDIRS
); do \
1934 target
=`expr $@ : 'intl.\(.*\)'` && \
1935 echo
"(cd $$d && $(MAKE) $$target)" && \
1936 (cd
$$d && AWK
='$(AWK)' $(MAKE
) $(SUBDIR_FLAGS_TO_PASS
) $$target); \
1939 # intl.distdir doesn't copy the intl makefiles (since they aren't distributed),
1940 # but we need them for the `make extraclean' in distdir-finish.
1942 for d in
$(INTL_SUBDIRS
); do \
1943 ln
$$d/Makefile tmp
/$$d || cp
$$d/Makefile tmp
/$$d || exit
; \
1946 # Remake cpp and protoize.
1948 # Making the preprocessor
1949 cpp$(exeext
): $(CCCP
)$(exeext
)
1951 $(LN
) $(CCCP
)$(exeext
) cpp$(exeext
)
1952 CCCP_OBJS
= cccp.o cexp.o intl.o
prefix.o version.o @extra_cpp_objs@ mbchar.o
1953 cccp
$(exeext
): $(CCCP_OBJS
) $(LIBDEPS
)
1954 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(CCCP_OBJS
) $(LIBS
)
1955 cexp.o
: $(srcdir)/cexp.c
$(CONFIG_H
) system.h
1956 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c
$(srcdir)/cexp.c
1957 $(srcdir)/cexp.c
: $(srcdir)/cexp.y
1958 cd
$(srcdir); $(BISON
) -o cexp.c cexp.y
1960 PREPROCESSOR_DEFINES
= \
1961 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
1962 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gcc_gxx_include_dir
)\" \
1963 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
1964 -DCROSS_INCLUDE_DIR
=\"$(gcc_tooldir
)/sys-include
\" \
1965 -DTOOL_INCLUDE_DIR
=\"$(gcc_tooldir
)/include\"
1966 # We use $(libsubdir)/$(unlibsubdir) to match the
1967 # -iprefix argument which gcc will pass if GCC_EXEC_PREFIX is used.
1968 cccp.o
: cccp.c
$(CONFIG_H
) intl.h pcp.h version.c config.status system.h \
1969 mbchar.h
prefix.h Makefile.in
1970 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1971 $(PREPROCESSOR_DEFINES
) \
1972 -c
`echo $(srcdir)/cccp.c | sed 's,^\./,,'`
1974 LIBCPP_OBJS
= cpplib.o cpphash.o cppalloc.o cpperror.o cppexp.o cppfiles.o \
1975 cppinit.o cppulp.o
prefix.o version.o mbchar.o @extra_cpp_objs@
1977 # All the other archives built/used by this makefile are for targets. This
1978 # one is strictly for the host.
1980 libcpp.a
: $(LIBCPP_OBJS
)
1981 $(AR
) $(AR_FLAGS
) libcpp.a
$(LIBCPP_OBJS
)
1982 if
$(RANLIB_TEST
) ; then
$(RANLIB
) libcpp.a
; else true
; fi
1984 cppmain
$(exeext
): cppmain.o intl.o libcpp.a
$(LIBDEPS
)
1985 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o cppmain
$(exeext
) cppmain.o \
1986 intl.o libcpp.a
$(LIBS
)
1988 cppmain.o
: cppmain.c
$(CONFIG_H
) cpplib.h intl.h system.h
1990 cppulp.o
: cppulp.c
$(CONFIG_H
) system.h output.h
1991 cpplib.o
: cpplib.c
$(CONFIG_H
) cpplib.h intl.h system.h cpphash.h
1992 cpphash.o
: cpphash.c
$(CONFIG_H
) cpplib.h intl.h system.h cpphash.h
1993 cppalloc.o
: cppalloc.c
$(CONFIG_H
) cpplib.h intl.h system.h
1994 cpperror.o
: cpperror.c
$(CONFIG_H
) cpplib.h intl.h system.h
1995 cppexp.o
: cppexp.c
$(CONFIG_H
) cpplib.h intl.h system.h
1996 cppfiles.o
: cppfiles.c
$(CONFIG_H
) cpplib.h intl.h system.h
1998 cppinit.o
: cppinit.c
$(CONFIG_H
) cpplib.h intl.h system.h \
1999 cpphash.h
prefix.h output.h Makefile
2000 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2001 $(PREPROCESSOR_DEFINES
) \
2002 -c
`echo $(srcdir)/cppinit.c | sed 's,^\./,,'`
2004 # Note for the stamp targets, we run the program `true' instead of
2005 # having an empty command (nothing following the semicolon).
2007 proto
: config.status protoize
$(exeext
) unprotoize
$(exeext
) SYSCALLS.c.X
2009 PROTO_OBJS
= intl.o version.o
2011 protoize
$(exeext
): protoize.o
$(PROTO_OBJS
) $(LIBDEPS
)
2012 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ protoize.o
$(PROTO_OBJS
) $(LIBS
)
2014 unprotoize
$(exeext
): unprotoize.o
$(PROTO_OBJS
) $(LIBDEPS
)
2015 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ unprotoize.o
$(PROTO_OBJS
) $(LIBS
)
2017 protoize.o
: protoize.c
$(srcdir)/..
/include/getopt.h
$(CONFIG_H
) system.h \
2019 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2020 $(DRIVER_DEFINES
) $(PREPROCESSOR_DEFINES
) \
2021 $(srcdir)/protoize.c
2023 unprotoize.o
: unprotoize.c protoize.c
$(srcdir)/..
/include/getopt.h \
2024 $(CONFIG_H
) system.h Makefile
2025 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2026 $(DRIVER_DEFINES
) $(PREPROCESSOR_DEFINES
) \
2027 $(srcdir)/unprotoize.c
2029 # This info describes the target machine, so compile with GCC just built.
2030 SYSCALLS.c.X
: $(srcdir)/sys-types.h
$(srcdir)/sys-protos.h
$(GCC_PASSES
) \
2032 -rm -f SYSCALLS.c tmp-SYSCALLS.s
2033 cat
$(srcdir)/sys-types.h
$(srcdir)/sys-protos.h
> SYSCALLS.c
2034 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2035 -aux-info
$@
-S
-o tmp-SYSCALLS.s SYSCALLS.c
2036 -rm -f SYSCALLS.c tmp-SYSCALLS.s
2039 test-protoize-simple
: .
/protoize .
/unprotoize
$(GCC_PASSES
)
2040 -rm -f tmp-proto.
[cso
]
2041 cp
$(srcdir)/protoize.c tmp-proto.c
2042 chmod u
+w tmp-proto.c
2043 .
/protoize
-N
-B .
/ -x getopt.h
-c
"-B./ -Wall -Wwrite-strings \
2044 $(GCC_CFLAGS) $(INCLUDES) \
2045 -DGCC_INCLUDE_DIR=0 \
2046 -DGPLUSPLUS_INCLUDE_DIR=0 \
2047 -DCROSS_INCLUDE_DIR=0 \
2048 -DTOOL_INCLUDE_DIR=0 \
2049 -DSTANDARD_EXEC_PREFIX=0 \
2050 -DDEFAULT_TARGET_MACHINE=0 \
2051 -DDEFAULT_TARGET_VERSION=0" tmp-proto.c
2052 @echo
'**********' Expect
400 lines of differences.
2053 -diff
$(srcdir)/protoize.c tmp-proto.c
> tmp-proto.diff
2054 -wc
-l tmp-proto.diff
2055 .
/unprotoize
-N
-x getopt.h
-c
"-B./ -Wall -Wwrite-strings \
2056 $(GCC_CFLAGS) $(INCLUDES) \
2057 -DGCC_INCLUDE_DIR=0 \
2058 -DGPLUSPLUS_INCLUDE_DIR=0 \
2059 -DCROSS_INCLUDE_DIR=0 \
2060 -DTOOL_INCLUDE_DIR=0 \
2061 -DSTANDARD_EXEC_PREFIX=0 \
2062 -DDEFAULT_TARGET_MACHINE=0 \
2063 -DDEFAULT_TARGET_VERSION=0" tmp-proto.c
2064 @echo Expect zero differences.
2065 diff
$(srcdir)/protoize.c tmp-proto.c | cat
2066 -rm -f tmp-proto.
[cs
] tmp-proto
$(objext
)
2068 gcov.o
: gcov.c gcov-io.h intl.h system.h
2070 # Only one of 'gcov' or 'gcov.exe' is actually built, depending
2071 # upon whether $(exeext) is empty or not.
2072 GCOV_OBJS
= gcov.o intl.o
2073 gcov
$(exeext
): $(GCOV_OBJS
) $(LIBDEPS
)
2074 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) $(GCOV_OBJS
) $(LIBS
) -o
$@
2076 # Build the include directory. The stamp files are stmp-* rather than
2077 # s-* so that mostlyclean does not force the include directory to
2080 # Build the include directory including float.h (which no longer depends upon
2082 stmp-int-hdrs
: stmp-fixinc
$(USER_H
) xlimits.h
2083 # Copy in the headers provided with gcc.
2084 # The sed command gets just the last file name component;
2085 # this is necessary because VPATH could add a dirname.
2086 # Using basename would be simpler, but some systems don't have it.
2087 # The touch command is here to workaround an AIX/Linux NFS bug.
2088 for file in ..
$(USER_H
); do \
2089 if
[ X
$$file != X..
]; then \
2090 realfile
=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
2091 touch
include/$$realfile; \
2092 rm -f
include/$$realfile; \
2093 cp
$$file include; \
2094 chmod a
+r
include/$$realfile; \
2097 rm -f
include/limits.h
2098 cp xlimits.h
include/limits.h
2099 chmod a
+r
include/limits.h
2100 rm -f
include/float.h
2101 if
[ x
$(FLOAT_H
) != xMakefile.in
]; then \
2102 cp
$(srcdir)/config
/$(FLOAT_H
) include/float.h
&& \
2103 chmod a
+r
include/float.h
; \
2105 # Install the README
2106 rm -f
include/README
2107 cp
$(srcdir)/README-fixinc
include/README
2108 chmod a
+r
include/README
2111 # Now that float.h no longer depends upon enquire, this is actually a no-op.
2115 FIXINCSRCDIR
=$(srcdir)/fixinc
2116 fixinc.sh
: $(FIXINCSRCDIR
)/mkfixinc.sh
$(FIXINCSRCDIR
)/fixincl.c \
2117 $(FIXINCSRCDIR
)/procopen.c
$(FIXINCSRCDIR
)/gnu-regex.c \
2118 $(FIXINCSRCDIR
)/server.c
$(FIXINCSRCDIR
)/gnu-regex.h \
2119 $(FIXINCSRCDIR
)/server.h
$(FIXINCSRCDIR
)/inclhack.def
2120 MAKE
="$(MAKE)"; srcdir=`cd $(srcdir)/fixinc; pwd` ; \
2121 export MAKE
srcdir ; \
2122 cd .
/fixinc
; $(SHELL
) $${srcdir}/mkfixinc.sh
$(target
)
2124 ##stmp-fixinc: $(FIXINCLUDES) gsyslimits.h
2127 ## if [ x$(FIXINCLUDES) != xMakefile.in ]; \
2129 ## for dir in $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS); do \
2130 ## if [ -d $$dir ]; \
2132 ## $(SHELL) $(srcdir)/$(FIXINCLUDES) include $$dir; \
2135 ## if [ x$(INSTALL_ASSERT_H) != x ] ; \
2137 ## rm -f include/assert.h; \
2138 ## cp $(srcdir)/assert.h include/assert.h; \
2139 ## chmod a+r include/assert.h; \
2144 # Build fixed copies of system files.
2145 stmp-fixinc
: fixinc.sh gsyslimits.h
2146 rm -rf
include; mkdir
include
2147 TARGET_MACHINE
=$(target
); srcdir=`cd $(srcdir); pwd`; \
2148 INSTALL_ASSERT_H
=$(INSTALL_ASSERT_H
); SHELL
=$(SHELL
) ;\
2149 export TARGET_MACHINE
srcdir INSTALL_ASSERT_H SHELL
; \
2150 $(SHELL
) .
/fixinc.sh
`pwd`/include $(SYSTEM_HEADER_DIR
) $(OTHER_FIXINCLUDES_DIRS
)
2151 rm -f
include/syslimits.h
2152 if
[ -f
include/limits.h
]; then \
2153 mv
include/limits.h
include/syslimits.h
; \
2155 cp
$(srcdir)/gsyslimits.h
include/syslimits.h
; \
2157 chmod a
+r
include/syslimits.h
2158 # If $(SYSTEM_HEADER_DIR) is $(tooldir)/sys-include, and
2159 # that directory exists, then make sure that $(libsubdir) exists.
2160 # This is because cpp is compiled to find $(tooldir)/include via
2161 # $(libsubdir)/$(unlibsubdir), which will only work if $(libsubdir)
2163 # We deliberately use tooldir instead of gcc_tooldir here. gcc_tooldir
2164 # won't work because libsubdir doesn't exist yet.
2165 if
[ "$(SYSTEM_HEADER_DIR)" = "$(tooldir)/sys-include" ] \
2166 && [ -d
$(tooldir
)/sys-include
]; then \
2167 if
[ -d
$(libdir) ] ; then true
; else mkdir
$(libdir) ; fi
; \
2168 if
[ -d
$(libdir)/gcc-lib
] ; then true
; else mkdir
$(libdir)/gcc-lib
; fi
; \
2169 if
[ -d
$(libdir)/gcc-lib
/$(target_alias
) ] ; then true
; else mkdir
$(libdir)/gcc-lib
/$(target_alias
) ; fi
; \
2170 if
[ -d
$(libdir)/gcc-lib
/$(target_alias
)/$(version
) ] ; then true
; else mkdir
$(libdir)/gcc-lib
/$(target_alias
)/$(version
) ; fi
; \
2175 # Files related to the fixproto script.
2177 deduced.h
: $(GCC_PASSES
) $(srcdir)/scan-types.sh stmp-int-hdrs
2178 if
[ -d
$(SYSTEM_HEADER_DIR
) ]; \
2180 CC
="$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -I. -I$(srcdir) -Iinclude -I${SYSTEM_HEADER_DIR}"; \
2182 $(SHELL
) $(srcdir)/scan-types.sh
"$(srcdir)" >tmp-deduced.h
; \
2183 mv tmp-deduced.h deduced.h
; \
2188 GEN_PROTOS_OBJS
= gen-protos.o scan.o libcpp.a
2189 gen-protos
: $(GEN_PROTOS_OBJS
) $(HOST_LIBDEPS
)
2190 ${HOST_CC} $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o gen-protos \
2191 $(GEN_PROTOS_OBJS
) $(HOST_LIBS
)
2193 gen-protos.o
: gen-protos.c scan.h
$(build_xm_file
) system.h
2194 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gen-protos.c
2196 scan.o
: scan.c scan.h
$(build_xm_file
) system.h
2197 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/scan.c
2199 xsys-protos.h
: $(GCC_PASSES
) $(srcdir)/sys-protos.h deduced.h gen-protos Makefile
2200 cat deduced.h
$(srcdir)/sys-protos.h
> tmp-fixtmp.c
2201 mv tmp-fixtmp.c fixtmp.c
2202 $(GCC_FOR_TARGET
) fixtmp.c
-w
-U__SIZE_TYPE__
-U__PTRDIFF_TYPE__
-U__WCHAR_TYPE__
-E \
2203 | sed
-e
's/ / /g' -e
's/ *(/ (/g' -e
's/ [ ]*/ /g' -e
's/( )/()/' \
2204 | .
/gen-protos
>xsys-protos.hT
2205 mv xsys-protos.hT xsys-protos.h
2208 fix-header
: fix-header.o scan-decls.o scan.o xsys-protos.h
$(HOST_LIBDEPS
) \
2210 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ fix-header.o \
2211 scan-decls.o scan.o libcpp.a
$(HOST_LIBS
)
2213 fix-header.o
: fix-header.c
$(srcdir)/..
/include/obstack.h scan.h \
2214 xsys-protos.h
$(build_xm_file
) system.h cpplib.h cpphash.h
2215 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/fix-header.c
2217 scan-decls.o
: scan-decls.c scan.h cpplib.h
$(build_xm_file
) system.h
2218 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/scan-decls.c
2220 # stmp-fixproto depends on this, not on fix-header directly.
2221 # The idea is to make sure fix-header gets built,
2222 # but not rerun fixproto after each stage
2223 # just because fix-header's mtime has changed.
2224 fixhdr.ready
: fix-header
2225 -if
[ -f fixhdr.ready
] ; then \
2228 touch fixhdr.ready
; \
2231 # stmp-headers is to make sure fixincludes has already finished.
2232 # The if statement is so that we don't run fixproto a second time
2233 # if it has already been run on the files in `include'.
2234 stmp-fixproto
: fixhdr.ready fixproto stmp-headers
2235 @echo
"Various warnings and error messages from fixproto are normal"
2236 -if
[ -d
include ] ; then true
; else mkdir
include; fi
2237 -if
[ -f
include/fixed
] ; then true
; \
2239 : This line works around a
'make' bug in BSDI
1.1.
; \
2240 FIXPROTO_DEFINES
="$(FIXPROTO_DEFINES)"; export FIXPROTO_DEFINES
; \
2241 mkinstalldirs
="$(SHELL) $(srcdir)/mkinstalldirs"; \
2242 export mkinstalldirs
; \
2243 if
[ -d
$(SYSTEM_HEADER_DIR
) ] ; then \
2244 $(SHELL
) ${srcdir}/fixproto
include include $(SYSTEM_HEADER_DIR
); \
2246 touch
include/fixed
; \
2250 # Remake the info files.
2253 info: cpp.
info gcc.
info lang.
info
2255 cpp.
info: $(srcdir)/cpp.texi
2256 $(MAKEINFO
) $(MAKEINFOFLAGS
) -I
$(srcdir) -o
cpp.
info $(srcdir)/cpp.texi
2258 gcc.
info: $(srcdir)/gcc.texi
$(srcdir)/extend.texi
$(srcdir)/install.texi \
2259 $(srcdir)/invoke.texi
$(srcdir)/md.texi
$(srcdir)/rtl.texi \
2260 $(srcdir)/tm.texi
$(srcdir)/gcov.texi
2261 $(MAKEINFO
) $(MAKEINFOFLAGS
) -I
$(srcdir) -o gcc.
info $(srcdir)/gcc.texi
2263 dvi: gcc.
dvi cpp.
dvi lang.
dvi
2265 # This works with GNU Make's default rule.
2266 gcc.
dvi: $(srcdir)/gcc.texi
$(srcdir)/extend.texi
$(srcdir)/install.texi \
2267 $(srcdir)/invoke.texi
$(srcdir)/md.texi
$(srcdir)/rtl.texi \
2268 $(srcdir)/tm.texi
$(srcdir)/gcov.texi
2269 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
2271 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
2273 cpp.
dvi: $(srcdir)/cpp.texi
2274 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
2276 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
2279 INSTALL
: $(srcdir)/install1.texi
$(srcdir)/install.texi
2280 cd
$(srcdir); $(MAKEINFO
) -D INSTALLONLY \
2281 --no-split
-o INSTALL install1.texi
2283 # Deletion of files made during compilation.
2284 # There are four levels of this:
2285 # `mostlyclean', `clean', `distclean' and `maintainer-clean'.
2286 # `mostlyclean' is useful while working on a particular type of machine.
2287 # It deletes most, but not all, of the files made by compilation.
2288 # It does not delete libgcc.a or its parts, so it won't have to be recompiled.
2289 # `clean' deletes everything made by running `make all'.
2290 # `distclean' also deletes the files made by config.
2291 # `maintainer-clean' also deletes everything that could be regenerated
2292 # automatically, except for `configure'.
2293 # We remove as much from the language subdirectories as we can
2294 # (less duplicated code).
2297 mostlyclean: intl.
mostlyclean lang.
mostlyclean
2298 -rm -f
$(STAGESTUFF
)
2299 # Delete the temporary source copies for cross compilation.
2300 -rm -f
$(HOST_PREFIX_1
)rtl.c
$(HOST_PREFIX_1
)rtlanal.c
2301 -rm -f
$(HOST_PREFIX_1
)alloca.c
$(HOST_PREFIX_1
)malloc.c
2302 -rm -f
$(HOST_PREFIX_1
)obstack.c
2303 # Delete the temp files made in the course of building libgcc.a.
2304 -rm -f tmplibgcc
* tmpcopy xlimits.h libgcc1-test
2305 for name in
$(LIB1FUNCS
); do
rm -f
$${name}.c
; done
2306 # Delete other built files.
2307 -rm -f t-float.h-cross xsys-protos.hT fp-bit.c dp-bit.c
2308 # Delete the stamp and temporary files.
2309 -rm -f s-
* tmp-
* stamp-
* stmp-
*
2310 -rm -f
*/stamp-
* */tmp-
*
2311 # Delete debugging dump files.
2312 -rm -f
*.greg
*.lreg
*.combine
*.flow
*.cse
*.jump
*.rtl
*.tree
*.loop
2313 -rm -f
*.dbr
*.jump2
*.sched
*.cse2
*.sched2
*.stack
*.addressof
2314 -rm -f
*.regmove
*.mach
*.bp
*.gcse
*.flow2
*.peephole2
2315 -rm -f
*/*.greg
*/*.lreg
*/*.combine
*/*.flow
*/*.cse
*/*.jump
*/*.rtl
2316 -rm -f
*/*.tree
*/*.loop
*/*.dbr
*/*.jump2
*/*.sched
*/*.cse2
2317 -rm -f
*/*.sched2
*/*.stack
*/*.regmove
*/*.gcse
*/*.flow2
2318 -rm -f
*/*.peephole2
2319 # Delete some files made during installation.
2320 -rm -f specs float.h-
* enquire SYSCALLS.c.X SYSCALLS.c
2321 -rm -f collect collect2 mips-tfile mips-tdump alloca.s
2322 # Delete files generated for fixproto
2323 -rm -rf fix-header xsys-protos.h deduced.h tmp-deduced.h \
2324 gen-protos fixproto.list fixtmp.
* fixhdr.ready
2325 # Delete unwanted output files from TeX.
2326 -rm -f
*.toc
*.log
*.vr
*.fn
*.cp
*.tp
*.ky
*.pg
2327 -rm -f
*/*.toc
*/*.log
*/*.vr
*/*.fn
*/*.cp
*/*.tp
*/*.ky
*/*.pg
2328 # Delete sorted indices we don't actually use.
2329 -rm -f gcc.vrs gcc.kys gcc.tps gcc.pgs gcc.fns
2330 # Delete core dumps.
2334 # Delete all files made by compilation
2335 # that don't exist in the distribution.
2336 clean: mostlyclean intl.
clean lang.
clean
2337 # It may not be quite desirable to delete unprotoize.c here,
2338 # but the spec for `make clean' requires it.
2339 # Using unprotoize.c is not quite right in the first place,
2340 # but what better way is there?
2341 -rm -f libgcc.a libgcc1.a libgcc1-asm.a libgcc2.a libgcc2.ready
2345 -if
[ -f md.pre-cpp
]; then \
2348 # Delete the include directory.
2350 # Delete files used by the "multilib" facility (including libgcc subdirs).
2351 -rm -f multilib.h tmpmultilib
*
2352 -if
[ "x$(MULTILIB_DIRNAMES)" != x
] ; then \
2353 rm -rf
$(MULTILIB_DIRNAMES
); \
2354 else if
[ "x$(MULTILIB_OPTIONS)" != x
] ; then \
2355 rm -rf
`echo $(MULTILIB_OPTIONS) | sed -e 's/\// /g'`; \
2357 -rm -fr stage1 stage2 stage3 stage4
2359 # Delete all files that users would normally create
2360 # while building and installing GCC.
2361 INTL_DISTCLEAN
= intl.
distclean
2362 distclean: clean $(INTL_DISTCLEAN
) lang.
distclean
2363 -rm -f tm.h config.h auto-host.h auto-build.h tconfig.h hconfig.h
2365 -rm -f config.status config.run config.cache config.bak
2366 -rm -f Make-lang Make-hooks Make-host Make-target
2367 -rm -f Makefile specs.h options.h gencheck.h
*.oaux
2368 -rm -f gthr-default.h
2369 -rm -f
*/stage1
*/stage2
*/stage3
*/stage4
*/include
2370 -rm -f c-parse.output
2373 -rm -f site.exp site.bak testsuite
/site.exp testsuite
/site.bak
2374 -rm -f testsuite
/{gcc
,g
++}.
{log
,sum
}
2375 -rm -f intl
/libintl.h libintl.h
2377 # Delete anything likely to be found in the source directory
2378 # that shouldn't be in the distribution.
2379 extraclean
: distclean lang.extraclean
2380 -rm -rf
=* .
/"#"* *~
* config
/=* config
/"#"* config
/*~
*
2381 -rm -f patch
* *.orig
*.rej config
/patch
* config
/*.orig config
/*.rej
2382 -rm -f config
/*/=* config
/*/"#"* config
/*/*~
*
2383 -rm -f config
/*/*.orig config
/*/*.rej
2384 -rm -f
*.
dvi *.ps
*.oaux
*.d
*.
[zZ
] *.gz
2385 -rm -f
*.
tar *.xtar
*diff
*.diff.
* *.
tar.
* *.xtar.
* *diffs
2386 -rm -f
*lose config
/*lose config
/*/*lose
2387 -rm -f
*.s
*.s
[0-9] *.i config
/ChangeLog
2388 -rm -f y.tab.c
yacc.
*
2389 -rm -f
*/=* */"#"* */*~
*
2390 -rm -f
*/patch
* */*.orig
*/*.rej
2391 -rm -f
*/*.
dvi */*.oaux
*/*.d
*/*.
[zZ
] */*.gz
2392 -rm -f
*/*.
tar */*.xtar
*/*diff
*/*.diff.
* */*.
tar.
* */*.xtar.
* */*diffs
2393 -rm -f
*/*lose
*/*.s
*/*.s
[0-9] */*.i
2395 # Get rid of every file that's generated from some other file, except for `configure'.
2396 # Most of these files ARE PRESENT in the GCC distribution.
2397 # We define INTL_DISTCLEAN to be empty in the submake, so that
2398 # we don't descend into intl after its makefile has been removed.
2400 @echo
'This command is intended for maintainers to use; it'
2401 @echo
'deletes files that may need special tools to rebuild.'
2402 $(MAKE
) INTL_DISTCLEAN
= distclean \
2403 intl.maintainer-clean lang.maintainer-clean
2404 -rm -f c-parse.y c-gperf.h
2405 -rm -f c-parse.c c-parse.h c-parse.output
2406 -rm -f cexp.c cexp.output TAGS
2407 -rm -f
cpp.
info* cpp.??s
cpp.
*aux
2408 -rm -f gcc.
info* gcc.??s gcc.
*aux
2410 # Entry points `install' and `uninstall'.
2411 # Also use `install-collect2' to install collect2 when the config files don't.
2413 # The semicolon is to prevent the install.sh -> install default rule
2414 # from doing anything. Having it run true helps avoid problems and
2415 # noise from versions of make which don't like to have null commands.
2416 install: $(INSTALL_TARGET
) ; @true
2418 # Copy the compiler files into directories where they will be run.
2419 # Install the driver last so that the window when things are
2421 install-normal
: install-common
$(INSTALL_HEADERS
) $(INSTALL_LIBGCC
) \
2422 $(INSTALL_CPP
) install-man install-info intl.
install lang.install-normal \
2425 # Do nothing while making gcc with a cross-compiler. The person who
2426 # makes gcc for the target machine has to know how to put a complete
2427 # gcc together by hand.
2428 install-build
: force
2429 @echo You have to
install gcc on your target machine by hand.
2431 # Run this on the target machine
2432 # to finish installation of cross compiler.
2433 # This is not used anymore now that float.h does not depend on enquire.
2434 install-cross-rest
: install-float-h-cross
2436 # Handle cpp installation.
2437 install-cpp
: xcpp
$(exeext
)
2438 -rm -f
$(bindir)/$(CPP_INSTALL_NAME
)$(exeext
)
2439 $(INSTALL_PROGRAM
) -m
755 xcpp
$(exeext
) $(bindir)/$(CPP_INSTALL_NAME
)$(exeext
)
2440 if
[ x
$(cpp_install_dir
) != x
]; then \
2441 rm -f
$(prefix)/$(cpp_install_dir
)/$(CPP_INSTALL_NAME
)$(exeext
); \
2442 $(INSTALL_PROGRAM
) -m
755 xcpp
$(exeext
) $(prefix)/$(cpp_install_dir
)/$(CPP_INSTALL_NAME
)$(exeext
); \
2446 -rm -f
$(bindir)/cpp
2447 -if
[ x
$(cpp_install_dir
) != x
]; then \
2448 rm -f
$(prefix)/$(cpp_install_dir
)/cpp; \
2451 # Install float.h for cross compiler.
2452 # Run this on the target machine!
2453 # This is not used anymore now that float.h does not depend on enquire.
2454 install-float-h-cross
: installdirs
2455 # if [ -f enquire ] ; then true; else false; fi
2456 # Note: don't use -. We should fail right away if enquire was not made.
2457 .
/enquire
-f
> $(tmpdir
)/float.h
2458 -rm -f
$(libsubdir
)/include/float.h
2459 $(INSTALL_DATA
) $(tmpdir
)/float.h
$(libsubdir
)/include/float.h
2460 -rm -f
$(tmpdir
)/float.h
2461 chmod a-x
$(libsubdir
)/include/float.h
2463 # Create the installation directories.
2465 -if
[ -d
$(prefix) ] ; then true
; else mkdir
$(prefix) ; chmod a
+rx
$(prefix) ; fi
2466 -if
[ -d
$(exec_prefix) ] ; then true
; else mkdir
$(exec_prefix) ; chmod a
+rx
$(exec_prefix) ; fi
2467 -if
[ -d
$(libdir) ] ; then true
; else mkdir
$(libdir) ; chmod a
+rx
$(libdir) ; fi
2468 -if
[ -d
$(libdir)/gcc-lib
] ; then true
; else mkdir
$(libdir)/gcc-lib
; chmod a
+rx
$(libdir)/gcc-lib
; fi
2469 # This dir isn't currently searched by cpp.
2470 # -if [ -d $(libdir)/gcc-lib/include ] ; then true ; else mkdir $(libdir)/gcc-lib/include ; chmod a+rx $(libdir)/gcc-lib/include ; fi
2471 -fdir
= ; for
dir in
`echo $(libsubdir) | tr '/' ' '`; do \
2472 fdir
=$${fdir}/$${dir}; \
2473 if
[ -d
$${fdir} ] ; then true
; else mkdir
$${fdir}; chmod a
+rx
$${fdir}; fi
; \
2475 -if
[ -d
$(bindir) ] ; then true
; else mkdir
$(bindir) ; chmod a
+rx
$(bindir) ; fi
2476 -if
[ -d
$(includedir) ] ; then true
; else mkdir
$(includedir) ; chmod a
+rx
$(includedir) ; fi
2477 -if
[ -d
$(gcc_tooldir
) ] ; then true
; else mkdir
$(gcc_tooldir
) ; chmod a
+rx
$(gcc_tooldir
) ; fi
2478 -if
[ -d
$(assertdir
) ] ; then true
; else mkdir
$(assertdir
) ; chmod a
+rx
$(assertdir
) ; fi
2479 -if
[ -d
$(infodir) ] ; then true
; else mkdir
$(infodir) ; chmod a
+rx
$(infodir) ; fi
2480 # We don't use mkdir -p to create the parents of man1dir,
2481 # because some systems don't support it.
2482 # Instead, we use this technique to create the immediate parent of man1dir.
2483 -parent
=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \
2484 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; chmod a
+rx
$$parent ; fi
2485 -if
[ -d
$(man1dir) ] ; then true
; else mkdir
$(man1dir) ; chmod a
+rx
$(man1dir) ; fi
2487 # Install the compiler executables built during cross compilation.
2488 install-common
: native
installdirs $(EXTRA_PARTS
) lang.install-common
2489 for file in
$(COMPILERS
); do \
2490 if
[ -f
$$file ] ; then \
2491 rm -f
$(libsubdir
)/$$file; \
2492 $(INSTALL_PROGRAM
) $$file $(libsubdir
)/$$file; \
2496 for file in
$(EXTRA_PASSES
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
) ..
; do \
2497 if
[ x
"$$file" != x..
]; then \
2498 rm -f
$(libsubdir
)/$$file; \
2499 $(INSTALL_PROGRAM
) $$file $(libsubdir
)/$$file; \
2502 for file in
$(EXTRA_PARTS
) ..
; do \
2503 if
[ x
"$$file" != x..
]; then \
2504 rm -f
$(libsubdir
)/$$file; \
2505 $(INSTALL_DATA
) $$file $(libsubdir
)/$$file; \
2506 chmod a-x
$(libsubdir
)/$$file; \
2509 # Don't mess with specs if it doesn't exist yet.
2510 -if
[ -f specs
] ; then \
2511 rm -f
$(libsubdir
)/specs
; \
2512 $(INSTALL_DATA
) specs
$(libsubdir
)/specs
; \
2513 chmod a-x
$(libsubdir
)/specs
; \
2515 # Install protoize if it was compiled.
2516 -if
[ -f protoize
$(exeext
) ]; \
2518 if
[ -f gcc-cross
$(exeext
) ] ; then \
2519 rm -f
$(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
); \
2520 $(INSTALL_PROGRAM
) protoize
$(exeext
) $(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
); \
2521 rm -f
$(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
); \
2522 $(INSTALL_PROGRAM
) unprotoize
$(exeext
) $(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
); \
2524 rm -f
$(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
); \
2525 $(INSTALL_PROGRAM
) protoize
$(exeext
) $(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
); \
2526 rm -f
$(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
); \
2527 $(INSTALL_PROGRAM
) unprotoize
$(exeext
) $(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
); \
2529 rm -f
$(libsubdir
)/SYSCALLS.c.X
; \
2530 $(INSTALL_DATA
) SYSCALLS.c.X
$(libsubdir
)/SYSCALLS.c.X
; \
2531 chmod a-x
$(libsubdir
)/SYSCALLS.c.X
; \
2533 -rm -f
$(libsubdir
)/cpp$(exeext
)
2534 $(INSTALL_PROGRAM
) cpp$(exeext
) $(libsubdir
)/cpp$(exeext
)
2535 # Install gcov if it was compiled.
2536 -if
[ -f gcov
$(exeext
) ]; \
2538 rm -f
$(bindir)/gcov
$(exeext
); \
2539 $(INSTALL_PROGRAM
) gcov
$(exeext
) $(bindir)/$(GCOV_INSTALL_NAME
)$(exeext
); \
2542 # Install the driver program as $(target_alias)-gcc
2543 # and also as either gcc (if native) or $(gcc_tooldir)/bin/gcc.
2544 install-driver
: xgcc
$(exeext
)
2545 -if
[ -f gcc-cross
$(exeext
) ] ; then \
2546 rm -f
$(bindir)/$(GCC_CROSS_NAME
)$(exeext
); \
2547 $(INSTALL_PROGRAM
) gcc-cross
$(exeext
) $(bindir)/$(GCC_CROSS_NAME
)$(exeext
); \
2548 if
[ -d
$(gcc_tooldir
)/bin
/.
] ; then \
2549 rm -f
$(gcc_tooldir
)/bin
/gcc
$(exeext
); \
2550 $(INSTALL_PROGRAM
) gcc-cross
$(exeext
) $(gcc_tooldir
)/bin
/gcc
$(exeext
); \
2553 rm -f
$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
); \
2554 $(INSTALL_PROGRAM
) xgcc
$(exeext
) $(bindir)/$(GCC_INSTALL_NAME
)$(exeext
); \
2555 rm -f
$(bindir)/$(target_alias
)-gcc-1
$(exeext
); \
2556 $(LN
) $(bindir)/$(GCC_INSTALL_NAME
)$(exeext
) $(bindir)/$(target_alias
)-gcc-1
$(exeext
); \
2557 mv
$(bindir)/$(target_alias
)-gcc-1
$(exeext
) $(bindir)/$(target_alias
)-gcc
$(exeext
); \
2560 # Install the info files.
2561 # $(INSTALL_DATA) might be a relative pathname, so we can't cd into srcdir
2562 # to do the install.
2563 install-info
: doc
installdirs lang.install-info
2564 -rm -f
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2565 for f in
cpp.
info* gcc.
info*; do \
2566 $(INSTALL_DATA
) $$f $(infodir)/$$f; \
2568 -if
$(SHELL
) -c
'install-info --version' >/dev
/null
2>&1; then \
2569 if
[ -f
$(infodir)/dir ] ; then \
2570 for f in
cpp.
info gcc.
info; do \
2571 install-info
--dir-file
=$(infodir)/dir $(infodir)/$$f; \
2575 -chmod a-x
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2577 # Install the man pages.
2578 install-man
: installdirs $(srcdir)/gcc
.1 $(srcdir)/cccp
.1 lang.install-man
2579 -if
[ -f gcc-cross
$(exeext
) ] ; then \
2580 rm -f
$(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2581 $(INSTALL_DATA
) $(srcdir)/gcc
.1 $(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2582 chmod a-x
$(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2584 rm -f
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2585 $(INSTALL_DATA
) $(srcdir)/gcc
.1 $(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2586 chmod a-x
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2588 -rm -f
$(man1dir)/cccp
$(manext)
2589 -$(INSTALL_DATA
) $(srcdir)/cccp
.1 $(man1dir)/cccp
$(manext)
2590 -chmod a-x
$(man1dir)/cccp
$(manext)
2592 # Install the library.
2593 install-libgcc
: libgcc.a
installdirs
2594 -if
[ -f libgcc.a
] ; then \
2595 rm -f
$(libsubdir
)/libgcc.a
; \
2596 $(INSTALL_DATA
) libgcc.a
$(libsubdir
)/libgcc.a
; \
2597 if
$(RANLIB_TEST_FOR_TARGET
) ; then \
2598 (cd
$(libsubdir
); $(RANLIB_FOR_TARGET
) libgcc.a
); else true
; fi
; \
2599 chmod a-x
$(libsubdir
)/libgcc.a
; \
2602 # Install multiple versions of libgcc.a.
2603 install-multilib
: stmp-multilib
installdirs
2604 for i in
`$(GCC_FOR_TARGET) --print-multi-lib`; do \
2605 dir=`echo $$i | sed -e 's/;.*$$//'`; \
2606 if
[ -d
$(libsubdir
)/$${dir} ]; then true
; else mkdir
$(libsubdir
)/$${dir}; fi
; \
2607 for f in libgcc.a
$(EXTRA_MULTILIB_PARTS
); do \
2608 rm -f
$(libsubdir
)/$${dir}/$${f}; \
2609 $(INSTALL_DATA
) $${dir}/$${f} $(libsubdir
)/$${dir}/$${f}; \
2611 if
$(RANLIB_TEST_FOR_TARGET
); then \
2612 (cd
$(libsubdir
)/$${dir}; $(RANLIB_FOR_TARGET
) libgcc.a
); \
2614 chmod a-x
$(libsubdir
)/$${dir}/libgcc.a
; \
2617 # Install all the header files built in the include subdirectory.
2618 install-headers
: install-include-dir
$(INSTALL_HEADERS_DIR
) $(INSTALL_ASSERT_H
)
2619 # Fix symlinks to absolute paths in the installed include directory to
2620 # point to the installed directory, not the build directory.
2621 # Don't need to use LN_S here since we really do need ln -s and no substitutes.
2622 -files
=`cd $(libsubdir)/include; find . -type l -print 2>/dev/null`; \
2623 if
[ $$?
-eq
0 ]; then \
2624 dir=`cd include; pwd`; \
2625 for i in
$$files; do \
2626 dest
=`ls -ld $(libsubdir)/include/$$i | sed -n 's/.*-> //p'`; \
2627 if expr
"$$dest" : "$$dir.*" > /dev
/null
; then \
2628 rm -f
$(libsubdir
)/include/$$i; \
2629 ln
-s
`echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(libsubdir
)/include/$$i; \
2634 # Create or recreate the gcc private include file directory.
2635 install-include-dir
: installdirs
2636 -rm -rf
$(libsubdir
)/include
2637 mkdir
$(libsubdir
)/include
2638 -chmod a
+rx
$(libsubdir
)/include
2640 # Install the include directory using tar.
2641 install-headers-tar
: stmp-headers
$(STMP_FIXPROTO
) install-include-dir
2642 # We use `pwd`/include instead of just include to problems with CDPATH
2643 # Unless a full pathname is provided, some shells would print the new CWD,
2644 # found in CDPATH, corrupting the output. We could just redirect the
2645 # output of `cd', but some shells lose on redirection within `()'s
2646 (cd
`pwd`/include ; \
2647 tar -cf
- .
; exit
0) |
(cd
$(libsubdir
)/include; tar xpf
- )
2648 # /bin/sh on some systems returns the status of the first tar,
2649 # and that can lose with GNU tar which always writes a full block.
2650 # So use `exit 0' to ignore its exit status.
2652 # Install the include directory using cpio.
2653 install-headers-cpio
: stmp-headers
$(STMP_FIXPROTO
) install-include-dir
2654 # See discussion about the use of `pwd` above
2655 cd
`pwd`/include ; \
2656 find .
-print | cpio
-pdum
$(libsubdir
)/include
2658 # Put assert.h where it won't override GNU libc's assert.h.
2659 # It goes in a dir that is searched after GNU libc's headers;
2660 # thus, the following conditionals are no longer needed.
2661 # But it's not worth deleting them now.
2662 ## Don't replace the assert.h already there if it is not from GCC.
2663 ## This code would be simpler if it tested for -f ... && ! grep ...
2664 ## but supposedly the ! operator is missing in sh on some systems.
2665 install-assert-h
: assert.h
installdirs
2666 if
[ -f
$(assertdir
)/assert.h
]; \
2668 if grep
"__eprintf" $(assertdir
)/assert.h
>/dev
/null
; \
2670 rm -f
$(assertdir
)/assert.h
; \
2671 $(INSTALL_DATA
) $(srcdir)/assert.h
$(assertdir
)/assert.h
; \
2672 chmod a-x
$(assertdir
)/assert.h
; \
2676 rm -f
$(assertdir
)/assert.h
; \
2677 $(INSTALL_DATA
) $(srcdir)/assert.h
$(assertdir
)/assert.h
; \
2678 chmod a-x
$(assertdir
)/assert.h
; \
2681 # Use this target to install the program `collect2' under the name `collect2'.
2682 install-collect2
: collect2
installdirs
2683 $(INSTALL_PROGRAM
) collect2
$(exeext
) $(libsubdir
)/collect2
$(exeext
)
2684 # Install the driver program as $(libsubdir)/gcc for collect2.
2685 $(INSTALL_PROGRAM
) xgcc
$(exeext
) $(libsubdir
)/gcc
$(exeext
)
2687 # Cancel installation by deleting the installed files.
2688 uninstall: intl.
uninstall lang.
uninstall $(UNINSTALL_CPP
)
2689 -rm -rf
$(libsubdir
)
2690 -rm -rf
$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
)
2691 -rm -rf
$(bindir)/$(GCC_CROSS_NAME
)$(exeext
)
2692 -rm -rf
$(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
)
2693 -rm -rf
$(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
)
2694 -rm -rf
$(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
)
2695 -rm -rf
$(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
)
2696 -rm -rf
$(bindir)/$(GCOV_INSTALL_NAME
)$(exeext
)
2697 -rm -rf
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext)
2698 -rm -rf
$(man1dir)/$(GCC_CROSS_NAME
)$(manext)
2699 -rm -rf
$(man1dir)/cccp
$(manext)
2700 -rm -rf
$(man1dir)/protoize
$(manext)
2701 -rm -rf
$(man1dir)/unprotoize
$(manext)
2702 -rm -f
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2704 # These targets are for the dejagnu testsuites. The file site.exp
2705 # contains global variables that all the testsuites will use.
2707 # Set to $(target_alias)/ for cross.
2708 target_subdir
= @target_subdir@
2710 site.exp
: .
/config.status Makefile
2711 @echo
"Making a new config file..."
2714 -@mv site.exp site.bak
2715 @echo
"## these variables are automatically generated by make ##" > .
/tmp0
2716 @echo
"# Do not edit here. If you wish to override these values" >> .
/tmp0
2717 @echo
"# add them to the last section" >> .
/tmp0
2718 @echo
"set rootme \"`pwd`\"" >> .
/tmp0
2719 @echo
"set srcdir \"`cd ${srcdir}; pwd`\"" >> .
/tmp0
2720 @echo
"set host_triplet $(host_canonical)" >> .
/tmp0
2721 @echo
"set build_triplet $(build_canonical)" >> .
/tmp0
2722 @echo
"set target_triplet $(target)" >> .
/tmp0
2723 @echo
"set target_alias $(target_alias)" >> .
/tmp0
2724 # CFLAGS is set even though it's empty to show we reserve the right to set it.
2725 @echo
"set CFLAGS \"\"" >> .
/tmp0
2726 @echo
"set CXXFLAGS \"-I$(objdir)/../$(target_subdir)libio -I\$$srcdir/../libg++/src -I\$$srcdir/../libio -I\$$srcdir/../libstdc++ -I\$$srcdir/../libstdc++/stl -L$(objdir)/../$(target_subdir)libg++ -L$(objdir)/../$(target_subdir)libstdc++\"" >> .
/tmp0
2727 # If newlib has been configured, we need to pass -B to gcc so it can find
2728 # newlib's crt0.o if it exists. This will cause a "path prefix not used"
2729 # message if it doesn't, but the testsuite is supposed to ignore the message -
2730 # it's too difficult to tell when to and when not to pass -B (not all targets
2731 # have crt0's). We could only add the -B if ../newlib/crt0.o exists, but that
2732 # seems like too selective a test.
2733 # ??? Another way to solve this might be to rely on linker scripts. Then
2734 # theoretically the -B won't be needed.
2735 # We also need to pass -L ../ld so that the linker can find ldscripts.
2736 @if
[ -d
$(objdir
)/..
/$(target_subdir
)newlib
] ; then \
2737 echo
"set newlib_cflags \"-I$(objdir)/../$(target_subdir)newlib/targ-include -I\$$srcdir/../newlib/libc/include\"" >> .
/tmp0
; \
2738 echo
"set newlib_ldflags \"-B$(objdir)/../$(target_subdir)newlib/\"" >> .
/tmp0
; \
2739 echo
"append CFLAGS \" \$$newlib_cflags\"" >> .
/tmp0
; \
2740 echo
"append CXXFLAGS \" \$$newlib_cflags\"" >> .
/tmp0
; \
2741 echo
"append LDFLAGS \" \$$newlib_ldflags\"" >> .
/tmp0
; \
2744 @if
[ -d
$(objdir
)/..
/ld ] ; then \
2745 echo
"append LDFLAGS \" -L$(objdir)/../ld\"" >> .
/tmp0
; \
2748 echo
"set tmpdir $(objdir)/testsuite" >> .
/tmp0
2749 @echo
"set srcdir \"\$${srcdir}/testsuite\"" >> .
/tmp0
2750 @echo
"## All variables above are generated by configure. Do Not Edit ##" >> .
/tmp0
2751 @cat .
/tmp0
> site.exp
2752 @cat site.bak | sed \
2753 -e
'1,/^## All variables above are.*##/ d' >> site.exp
2756 CHECK_TARGETS
= check-gcc check-g
++ check-g77 check-objc
2758 check: $(CHECK_TARGETS
)
2760 testsuite
/site.exp
: site.exp
2761 if
[ -d testsuite
]; then \
2766 rm -rf testsuite
/site.exp
2767 cp site.exp testsuite
/site.exp
2769 check-g
++: testsuite
/site.exp
2770 -rootme
=`pwd`; export rootme
; \
2771 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2773 EXPECT
=${EXPECT} ; export EXPECT
; \
2774 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2775 TCL_LIBRARY
=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
2776 export TCL_LIBRARY
; fi
; \
2777 $(RUNTEST
) --tool g
++ $(RUNTESTFLAGS
)
2779 check-gcc
: testsuite
/site.exp
2780 -rootme
=`pwd`; export rootme
; \
2781 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2783 EXPECT
=${EXPECT} ; export EXPECT
; \
2784 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2785 TCL_LIBRARY
=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
2786 export TCL_LIBRARY
; fi
; \
2787 $(RUNTEST
) --tool gcc
$(RUNTESTFLAGS
)
2789 check-g77
: testsuite
/site.exp
2790 -rootme
=`pwd`; export rootme
; \
2791 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2793 EXPECT
=${EXPECT} ; export EXPECT
; \
2794 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2795 TCL_LIBRARY
=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
2796 export TCL_LIBRARY
; fi
; \
2797 $(RUNTEST
) --tool g77
$(RUNTESTFLAGS
)
2799 check-objc
: testsuite
/site.exp
2800 -rootme
=`pwd`; export rootme
; \
2801 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2803 EXPECT
=${EXPECT} ; export EXPECT
; \
2804 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2805 TCL_LIBRARY
=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
2806 export TCL_LIBRARY
; fi
; \
2807 $(RUNTEST
) --tool objc
$(RUNTESTFLAGS
)
2809 # These exist for maintenance purposes.
2811 # Update the tags table.
2815 mv
-f c-parse.
[ch
] cexp.c
=*.
[chy
] tmp-tags
; \
2816 etags
*.y
*.h
*.c
; \
2820 # Create the distribution tar.gz file.
2822 gzip
--best
< tmp-gcc.xtar
> tmp-gcc.xtar.gz
2823 mv tmp-gcc.xtar.gz gcc-
$(version
).
tar.gz
2825 tmp-gcc.xtar
: distdir
2826 # Make the distribution.
2827 tar -chf tmp-gcc.xtar gcc-
$(version
)
2830 if
[ -d
$(srcdir)/CVS
]; then cd
$(srcdir) && cvs
-r update
; fi
2832 # This target exists to do the initial work before the language specific
2834 distdir-start
: doc
$(srcdir)/INSTALL
$(srcdir)/c-parse.y
$(srcdir)/c-gperf.h \
2835 $(srcdir)/c-parse.c
$(srcdir)/cexp.c
$(srcdir)/config.in \
2836 $(srcdir)/version.c TAGS
2837 @case
'$(USE_NLS)' in \
2839 *) echo
"configure with --enable-nls before making a distribution"; \
2842 @if grep
-s
"for version ${mainversion}" gcc.texi
> /dev
/null
; \
2844 else echo
"You must update the version number in \`gcc.texi'"; sleep
10;\
2846 # Update the version number in README
2847 $(AWK
) '$$1 " " $$2 " " $$3 == "This directory contains" \
2848 { $$6 = version; print $$0 } \
2849 $$1 " " $$2 " " $$3 != "This directory contains"' \
2850 version
=$(version
) $(srcdir)/README
> tmp.README
2851 mv tmp.README README
2852 -rm -rf gcc-
$(version
) tmp
2853 # Put all the files in a temporary subdirectory
2854 # which has the name that we want to have in the tar file.
2861 for file in
`(cd $(srcdir) && echo *[0-9a-zA-Z+])`; do \
2862 test -f
$(srcdir)/$$file && $(LN_S
) $(srcdir)/$$file tmp
; \
2864 if
test "$(srcdir)" != "." ; then \
2865 for file in c-parse.c cexp.c
; do \
2866 test -f .
/$$file && $(LN_S
) ..
/$$file tmp
; \
2869 for file in
`(cd $(srcdir)/config && echo *[0-9a-zA-Z+])`; do \
2870 if
test -d
$(srcdir)/config
/$$file \
2871 && test "$$file" != RCS
&& test "$$file" != CVS
; then \
2872 mkdir tmp
/config
/$$file; \
2873 for subfile in
`(cd $(srcdir)/config/$$file && echo *[0-9a-zA-Z+])`; do \
2874 $(LN_S
) $(srcdir)/config
/$$file/$$subfile tmp
/config
/$$file; \
2877 $(LN_S
) $(srcdir)/config
/$$file tmp
/config
; \
2880 for file in
`(cd $(srcdir)/ginclude && echo *[0-9a-zA-Z+])`; do \
2881 $(LN_S
) $(srcdir)/ginclude
/$$file tmp
/ginclude
; \
2883 for file in
`(cd $(srcdir)/objc && echo *[0-9a-zA-Z+])`; do \
2884 $(LN_S
) $(srcdir)/objc
/$$file tmp
/objc
; \
2886 $(LN_S
) .gdbinit tmp
2888 # Finish making `distdir', after the languages have done their thing.
2890 mv tmp gcc-
$(version
)
2891 # Get rid of everything we don't want in the distribution. We'd want
2892 # this to use Makefile.in, but it doesn't have the `lang.foo' targets
2894 cd gcc-
$(version
); make extraclean distdir-check VERSION_DEP
=
2897 ($(AWK
) '/^[^#]/{print} /^#[A-Za-z]/{print substr($$1, 2)}' |
sort) \
2898 < po
/POTFILES.in
> tmp.POTFILES
2899 ls
[A-Za-z
]*.
[ch
] [a-z
]*/[A-Za-z
]*.
[ch
] \
2900 [a-z
]*/[a-z
]*/[A-Za-z
]*.
[ch
] |
sort > tmp.src
2901 diff tmp.POTFILES tmp.src ||
{ \
2902 echo
"po/POTFILES.in and sources do not match -- please fix"; \
2907 distdir
: distdir-cvs distdir-start intl.distdir intl.distdir-fixup \
2908 lang.distdir distdir-finish
2910 # make diff oldversion=M.N
2911 # creates a diff file between an older distribution and this one.
2912 # The -P option assumes this is GNU diff.
2914 diff
-rc2P
-x c-parse.y
-x c-parse.c
-x c-parse.h
-x c-gperf.h \
2915 -x cexp.c
-x
-x TAGS
-x INSTALL \
2916 -x configure
-x config.in \
2917 -x
"gcc.??" -x
"gcc.??s" -x gcc.aux
-x
"gcc.info*" \
2918 -x
"cpp.??" -x
"cpp.??s" -x
cpp.aux
-x
"cpp.info*" \
2919 $(LANG_DIFF_EXCLUDES
) \
2920 gcc-
$(oldversion
) gcc-
$(version
) > gcc-
$(oldversion
)-$(version
).diff
2922 bootstrap bootstrap-lean
: force
2923 # Only build the C compiler for stage1, because that is the only one that
2924 # we can guarantee will build with the native compiler, and also it is the
2925 # only thing useful for building stage2.
2926 $(MAKE
) CC
="$(CC)" libdir=$(libdir) LANGUAGES
="$(BOOT_LANGUAGES)"
2928 # This used to define ALLOCA as empty, but that would lead to bad results
2929 # for a subsequent `make install' since that would not have ALLOCA empty.
2930 # To prevent `make install' from compiling alloca.o and then relinking cc1
2931 # because alloca.o is newer, we permit these recursive makes to compile
2932 # alloca.o. Then cc1 is newer, so it won't have to be relinked.
2933 $(MAKE
) CC
="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage1
/ LANGUAGES
="$(LANGUAGES)"
2935 -if
test $@
= bootstrap-lean
; then
rm -rf stage1
; else true
; fi
2936 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2938 bootstrap2 bootstrap2-lean
: force
2939 $(MAKE
) CC
="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage1
/ LANGUAGES
="$(LANGUAGES)"
2941 -if
test $@
= bootstrap2-lean
; then
rm -rf stage1
; else true
; fi
2942 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2944 bootstrap3 bootstrap3-lean
: force
2945 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2947 bootstrap4 bootstrap4-lean
: force
2948 $(MAKE
) CC
="stage3/xgcc$(exeext) -Bstage3/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage3
/ LANGUAGES
="$(LANGUAGES)"
2950 # Compare the object files in the current directory with those in the
2953 # ./ avoids bug in some versions of tail.
2954 compare compare3 compare4 compare-lean compare3-lean compare4-lean
: force
2956 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2957 for file in
*$(objext
); do \
2958 tail
+16c .
/$$file > tmp-foo1
; \
2959 tail
+16c stage
$$stage/$$file > tmp-foo2 \
2960 && (cmp tmp-foo1 tmp-foo2
> /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2962 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2963 for
dir in tmp-foo intl
$(SUBDIRS
); do \
2964 if
[ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2965 for file in
$$dir/*$(objext
); do \
2966 tail
+16c .
/$$file > tmp-foo1
; \
2967 tail
+16c stage
$$stage/$$file > tmp-foo2 \
2968 && (cmp tmp-foo1 tmp-foo2
> /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2973 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2974 if
[ -f .bad_compare
]; then \
2975 echo
"Bootstrap comparison failure!"; \
2980 *-lean
) rm -rf stage
$$stage ;; \
2985 # Compare the object files in the current directory with those in the
2986 # stage2 directory. Use gnu cmp (diffutils v2.4 or later) to avoid
2987 # running tail and the overhead of twice copying each object file.
2989 gnucompare gnucompare3 gnucompare4 gnucompare-lean gnucompare3-lean gnucompare4-lean
: force
2991 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2992 for file in
*$(objext
); do \
2993 (cmp
--ignore-initial
=16 $$file stage
$$stage/$$file > /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2995 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2996 for
dir in tmp-foo intl
$(SUBDIRS
); do \
2997 if
[ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2998 for file in
$$dir/*$(objext
); do \
2999 (cmp
--ignore-initial
=16 $$file stage
$$stage/$$file > /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
3003 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
3004 if
[ -f .bad_compare
]; then \
3005 echo
"Bootstrap comparison failure!"; \
3010 *-lean
) rm -rf stage
$$stage ;; \
3014 # Copy the object files from a particular stage into a subdirectory.
3016 -if
[ -d stage1
] ; then true
; else mkdir stage1
; fi
3017 -for
dir in intl
$(SUBDIRS
) ; \
3019 if
[ -d stage1
/$$dir ] ; then true
; else mkdir stage1
/$$dir ; fi
; \
3021 -mv
$(STAGESTUFF
) stage1
3022 -mv intl
/*$(objext
) stage1
/intl
3023 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3024 # dir will work properly.
3025 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage1
; else true
; fi
3026 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage1
; else true
; fi
3027 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage1
; else true
; fi
3028 -rm -f stage1
/libgcc.a
3030 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3031 $(RANLIB_FOR_TARGET
) stage1
/libgcc.a
; \
3033 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3034 cp stage1
/$${f} .
; \
3037 stage1
: force stage1-start lang.stage1
3040 -if
[ -d stage2
] ; then true
; else mkdir stage2
; fi
3041 -for
dir in intl
$(SUBDIRS
) ; \
3043 if
[ -d stage2
/$$dir ] ; then true
; else mkdir stage2
/$$dir ; fi
; \
3045 -mv
$(STAGESTUFF
) stage2
3046 -mv intl
/*$(objext
) stage2
/intl
3047 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3048 # dir will work properly.
3049 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage2
; else true
; fi
3050 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage2
; else true
; fi
3051 -if
[ -f collect-ld
] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage2
; else true
; fi
3052 -rm -f stage2
/libgcc.a
3054 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3055 $(RANLIB_FOR_TARGET
) stage2
/libgcc.a
; \
3057 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3058 cp stage2
/$${f} .
; \
3061 stage2
: force stage2-start lang.stage2
3064 -if
[ -d stage3
] ; then true
; else mkdir stage3
; fi
3065 -for
dir in intl
$(SUBDIRS
) ; \
3067 if
[ -d stage3
/$$dir ] ; then true
; else mkdir stage3
/$$dir ; fi
; \
3069 -mv
$(STAGESTUFF
) stage3
3070 -mv intl
/*$(objext
) stage3
/intl
3071 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3072 # dir will work properly.
3073 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage3
; else true
; fi
3074 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage3
; else true
; fi
3075 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage3
; else true
; fi
3076 -rm -f stage3
/libgcc.a
3078 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3079 $(RANLIB_FOR_TARGET
) stage3
/libgcc.a
; \
3081 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3082 cp stage3
/$${f} .
; \
3085 stage3
: force stage3-start lang.stage3
3088 -if
[ -d stage4
] ; then true
; else mkdir stage4
; fi
3089 -for
dir in intl
$(SUBDIRS
) ; \
3091 if
[ -d stage4
/$$dir ] ; then true
; else mkdir stage4
/$$dir ; fi
; \
3093 -mv
$(STAGESTUFF
) stage4
3094 -mv intl
/*$(objext
) stage4
/intl
3095 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3096 # dir will work properly.
3097 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage4
; else true
; fi
3098 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage4
; else true
; fi
3099 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage4
; else true
; fi
3100 -rm -f stage4
/libgcc.a
3102 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3103 $(RANLIB_FOR_TARGET
) stage4
/libgcc.a
; \
3105 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3106 cp stage4
/$${f} .
; \
3109 stage4
: force stage4-start lang.stage4
3111 # Copy just the executable files from a particular stage into a subdirectory,
3112 # and delete the object files. Use this if you're just verifying a version
3113 # that is pretty sure to work, and you are short of disk space.
3114 risky-stage1
: stage1
3117 risky-stage2
: stage2
3120 risky-stage3
: stage3
3123 risky-stage4
: stage4
3126 #In GNU Make, ignore whether `stage*' exists.
3127 .PHONY
: stage1 stage2 stage3 stage4
clean maintainer-clean TAGS bootstrap
3128 .PHONY
: risky-stage1 risky-stage2 risky-stage3 risky-stage4
3133 # The enquire rules are still useful for building new float-anything.h.
3134 # Special flags for compiling enquire.
3135 # We disable optimization to make floating point more reliable.
3136 ENQUIRE_CFLAGS
= -DNO_MEM
-DNO_LONG_DOUBLE_IO
-O0
3137 ENQUIRE_LDFLAGS
= $(LDFLAGS
)
3139 # Enquire target (This is a variable so that a target can choose not to
3143 # Test to see whether <float.h> exists in the system header files,
3144 # and is not derived from GCC.
3146 [ -f
$(SYSTEM_HEADER_DIR
)/float.h
] && \
3147 if grep
'ifndef _FLOAT_H___' $(SYSTEM_HEADER_DIR
)/float.h
>/dev
/null
; \
3150 # We pretend to not having a usable <float.h>, hence disable the FLOAT_H_TEST
3151 # to ensure, we're emitting a full blown <float.h> ourselves.
3152 FLOAT_H_TEST
= false
3154 # Used to compile enquire with standard cc, but have forgotten why.
3155 # Let's try with GCC.
3156 enquire
: enquire.o
$(GCC_PARTS
)
3157 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ENQUIRE_LDFLAGS
) enquire.o
-o
$@
3158 enquire.o
: $(srcdir)/enquire.c
$(GCC_PASSES
) stmp-int-hdrs
3159 if
$(FLOAT_H_TEST
); then \
3160 rm -f
include/float.h
; \
3161 SYS_FLOAT_H_WRAP
=1; \
3163 SYS_FLOAT_H_WRAP
=0; \
3165 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) $(ENQUIRE_CFLAGS
) \
3166 -DSYS_FLOAT_H_WRAP
=$$SYS_FLOAT_H_WRAP \
3167 -I.
-c
$(srcdir)/enquire.c
3169 # Create float.h source for the native machine.
3170 # Make it empty if we can use the system float.h without changes.
3171 float.h-nat
: enquire
3172 -.
/enquire
-f
> tmp-float.h
3173 grep
'#define [^_]' tmp-float.h
>/dev
/null || true
> tmp-float.h
3174 mv tmp-float.h float.h-nat
3176 # Create a dummy float.h source for a cross-compiler.
3177 # ??? This isn't used anymore. Should we create config/float-unkn.h
3178 # and make that the default float_format in configure?
3180 echo
"#ifndef __GCC_FLOAT_NOT_NEEDED" > t-float.h-cross
3181 echo
"#error float.h values not known for cross-compiler" >> t-float.h-cross
3182 echo
"#endif" >> t-float.h-cross
3183 mv t-float.h-cross float.h-cross