1 /* Variable tracking routines for the GNU compiler.
2 Copyright (C) 2002-2021 Free Software Foundation, Inc.
4 This file is part of GCC.
6 GCC is free software; you can redistribute it and/or modify it
7 under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 3, or (at your option)
11 GCC is distributed in the hope that it will be useful, but WITHOUT
12 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
13 or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
14 License for more details.
16 You should have received a copy of the GNU General Public License
17 along with GCC; see the file COPYING3. If not see
18 <http://www.gnu.org/licenses/>. */
20 /* This file contains the variable tracking pass. It computes where
21 variables are located (which registers or where in memory) at each position
22 in instruction stream and emits notes describing the locations.
23 Debug information (DWARF2 location lists) is finally generated from
25 With this debug information, it is possible to show variables
26 even when debugging optimized code.
28 How does the variable tracking pass work?
30 First, it scans RTL code for uses, stores and clobbers (register/memory
31 references in instructions), for call insns and for stack adjustments
32 separately for each basic block and saves them to an array of micro
34 The micro operations of one instruction are ordered so that
35 pre-modifying stack adjustment < use < use with no var < call insn <
36 < clobber < set < post-modifying stack adjustment
38 Then, a forward dataflow analysis is performed to find out how locations
39 of variables change through code and to propagate the variable locations
40 along control flow graph.
41 The IN set for basic block BB is computed as a union of OUT sets of BB's
42 predecessors, the OUT set for BB is copied from the IN set for BB and
43 is changed according to micro operations in BB.
45 The IN and OUT sets for basic blocks consist of a current stack adjustment
46 (used for adjusting offset of variables addressed using stack pointer),
47 the table of structures describing the locations of parts of a variable
48 and for each physical register a linked list for each physical register.
49 The linked list is a list of variable parts stored in the register,
50 i.e. it is a list of triplets (reg, decl, offset) where decl is
51 REG_EXPR (reg) and offset is REG_OFFSET (reg). The linked list is used for
52 effective deleting appropriate variable parts when we set or clobber the
55 There may be more than one variable part in a register. The linked lists
56 should be pretty short so it is a good data structure here.
57 For example in the following code, register allocator may assign same
58 register to variables A and B, and both of them are stored in the same
71 Finally, the NOTE_INSN_VAR_LOCATION notes describing the variable locations
72 are emitted to appropriate positions in RTL code. Each such a note describes
73 the location of one variable at the point in instruction stream where the
74 note is. There is no need to emit a note for each variable before each
75 instruction, we only emit these notes where the location of variable changes
76 (this means that we also emit notes for changes between the OUT set of the
77 previous block and the IN set of the current block).
79 The notes consist of two parts:
80 1. the declaration (from REG_EXPR or MEM_EXPR)
81 2. the location of a variable - it is either a simple register/memory
82 reference (for simple variables, for example int),
83 or a parallel of register/memory references (for a large variables
84 which consist of several parts, for example long long).
90 #include "coretypes.h"
96 #include "alloc-pool.h"
97 #include "tree-pass.h"
100 #include "insn-config.h"
102 #include "emit-rtl.h"
104 #include "diagnostic.h"
106 #include "stor-layout.h"
111 #include "tree-dfa.h"
112 #include "tree-ssa.h"
114 #include "tree-pretty-print.h"
115 #include "rtl-iter.h"
116 #include "fibonacci_heap.h"
117 #include "print-rtl.h"
118 #include "function-abi.h"
120 typedef fibonacci_heap
<long, basic_block_def
> bb_heap_t
;
122 /* var-tracking.c assumes that tree code with the same value as VALUE rtx code
123 has no chance to appear in REG_EXPR/MEM_EXPRs and isn't a decl.
124 Currently the value is the same as IDENTIFIER_NODE, which has such
125 a property. If this compile time assertion ever fails, make sure that
126 the new tree code that equals (int) VALUE has the same property. */
127 extern char check_value_val
[(int) VALUE
== (int) IDENTIFIER_NODE
? 1 : -1];
129 /* Type of micro operation. */
130 enum micro_operation_type
132 MO_USE
, /* Use location (REG or MEM). */
133 MO_USE_NO_VAR
,/* Use location which is not associated with a variable
134 or the variable is not trackable. */
135 MO_VAL_USE
, /* Use location which is associated with a value. */
136 MO_VAL_LOC
, /* Use location which appears in a debug insn. */
137 MO_VAL_SET
, /* Set location associated with a value. */
138 MO_SET
, /* Set location. */
139 MO_COPY
, /* Copy the same portion of a variable from one
140 location to another. */
141 MO_CLOBBER
, /* Clobber location. */
142 MO_CALL
, /* Call insn. */
143 MO_ADJUST
/* Adjust stack pointer. */
147 static const char * const ATTRIBUTE_UNUSED
148 micro_operation_type_name
[] = {
161 /* Where shall the note be emitted? BEFORE or AFTER the instruction.
162 Notes emitted as AFTER_CALL are to take effect during the call,
163 rather than after the call. */
166 EMIT_NOTE_BEFORE_INSN
,
167 EMIT_NOTE_AFTER_INSN
,
168 EMIT_NOTE_AFTER_CALL_INSN
171 /* Structure holding information about micro operation. */
172 struct micro_operation
174 /* Type of micro operation. */
175 enum micro_operation_type type
;
177 /* The instruction which the micro operation is in, for MO_USE,
178 MO_USE_NO_VAR, MO_CALL and MO_ADJUST, or the subsequent
179 instruction or note in the original flow (before any var-tracking
180 notes are inserted, to simplify emission of notes), for MO_SET
185 /* Location. For MO_SET and MO_COPY, this is the SET that
186 performs the assignment, if known, otherwise it is the target
187 of the assignment. For MO_VAL_USE and MO_VAL_SET, it is a
188 CONCAT of the VALUE and the LOC associated with it. For
189 MO_VAL_LOC, it is a CONCAT of the VALUE and the VAR_LOCATION
190 associated with it. */
193 /* Stack adjustment. */
194 HOST_WIDE_INT adjust
;
199 /* A declaration of a variable, or an RTL value being handled like a
201 typedef void *decl_or_value
;
203 /* Return true if a decl_or_value DV is a DECL or NULL. */
205 dv_is_decl_p (decl_or_value dv
)
207 return !dv
|| (int) TREE_CODE ((tree
) dv
) != (int) VALUE
;
210 /* Return true if a decl_or_value is a VALUE rtl. */
212 dv_is_value_p (decl_or_value dv
)
214 return dv
&& !dv_is_decl_p (dv
);
217 /* Return the decl in the decl_or_value. */
219 dv_as_decl (decl_or_value dv
)
221 gcc_checking_assert (dv_is_decl_p (dv
));
225 /* Return the value in the decl_or_value. */
227 dv_as_value (decl_or_value dv
)
229 gcc_checking_assert (dv_is_value_p (dv
));
233 /* Return the opaque pointer in the decl_or_value. */
235 dv_as_opaque (decl_or_value dv
)
241 /* Description of location of a part of a variable. The content of a physical
242 register is described by a chain of these structures.
243 The chains are pretty short (usually 1 or 2 elements) and thus
244 chain is the best data structure. */
247 /* Pointer to next member of the list. */
250 /* The rtx of register. */
253 /* The declaration corresponding to LOC. */
256 /* Offset from start of DECL. */
257 HOST_WIDE_INT offset
;
260 /* Structure for chaining the locations. */
261 struct location_chain
263 /* Next element in the chain. */
264 location_chain
*next
;
266 /* The location (REG, MEM or VALUE). */
269 /* The "value" stored in this location. */
273 enum var_init_status init
;
276 /* A vector of loc_exp_dep holds the active dependencies of a one-part
277 DV on VALUEs, i.e., the VALUEs expanded so as to form the current
278 location of DV. Each entry is also part of VALUE' s linked-list of
279 backlinks back to DV. */
282 /* The dependent DV. */
284 /* The dependency VALUE or DECL_DEBUG. */
286 /* The next entry in VALUE's backlinks list. */
287 struct loc_exp_dep
*next
;
288 /* A pointer to the pointer to this entry (head or prev's next) in
289 the doubly-linked list. */
290 struct loc_exp_dep
**pprev
;
294 /* This data structure holds information about the depth of a variable
298 /* This measures the complexity of the expanded expression. It
299 grows by one for each level of expansion that adds more than one
302 /* This counts the number of ENTRY_VALUE expressions in an
303 expansion. We want to minimize their use. */
307 /* Type for dependencies actively used when expand FROM into cur_loc. */
308 typedef vec
<loc_exp_dep
, va_heap
, vl_embed
> deps_vec
;
310 /* This data structure is allocated for one-part variables at the time
311 of emitting notes. */
314 /* Doubly-linked list of dependent DVs. These are DVs whose cur_loc
315 computation used the expansion of this variable, and that ought
316 to be notified should this variable change. If the DV's cur_loc
317 expanded to NULL, all components of the loc list are regarded as
318 active, so that any changes in them give us a chance to get a
319 location. Otherwise, only components of the loc that expanded to
320 non-NULL are regarded as active dependencies. */
321 loc_exp_dep
*backlinks
;
322 /* This holds the LOC that was expanded into cur_loc. We need only
323 mark a one-part variable as changed if the FROM loc is removed,
324 or if it has no known location and a loc is added, or if it gets
325 a change notification from any of its active dependencies. */
327 /* The depth of the cur_loc expression. */
329 /* Dependencies actively used when expand FROM into cur_loc. */
333 /* Structure describing one part of variable. */
336 /* Chain of locations of the part. */
337 location_chain
*loc_chain
;
339 /* Location which was last emitted to location list. */
344 /* The offset in the variable, if !var->onepart. */
345 HOST_WIDE_INT offset
;
347 /* Pointer to auxiliary data, if var->onepart and emit_notes. */
348 struct onepart_aux
*onepaux
;
352 /* Maximum number of location parts. */
353 #define MAX_VAR_PARTS 16
355 /* Enumeration type used to discriminate various types of one-part
359 /* Not a one-part variable. */
361 /* A one-part DECL that is not a DEBUG_EXPR_DECL. */
363 /* A DEBUG_EXPR_DECL. */
369 /* Structure describing where the variable is located. */
372 /* The declaration of the variable, or an RTL value being handled
373 like a declaration. */
376 /* Reference count. */
379 /* Number of variable parts. */
382 /* What type of DV this is, according to enum onepart_enum. */
383 ENUM_BITFIELD (onepart_enum
) onepart
: CHAR_BIT
;
385 /* True if this variable_def struct is currently in the
386 changed_variables hash table. */
387 bool in_changed_variables
;
389 /* The variable parts. */
390 variable_part var_part
[1];
393 /* Pointer to the BB's information specific to variable tracking pass. */
394 #define VTI(BB) ((variable_tracking_info *) (BB)->aux)
396 /* Return MEM_OFFSET (MEM) as a HOST_WIDE_INT, or 0 if we can't. */
398 static inline HOST_WIDE_INT
399 int_mem_offset (const_rtx mem
)
401 HOST_WIDE_INT offset
;
402 if (MEM_OFFSET_KNOWN_P (mem
) && MEM_OFFSET (mem
).is_constant (&offset
))
407 #if CHECKING_P && (GCC_VERSION >= 2007)
409 /* Access VAR's Ith part's offset, checking that it's not a one-part
411 #define VAR_PART_OFFSET(var, i) __extension__ \
412 (*({ variable *const __v = (var); \
413 gcc_checking_assert (!__v->onepart); \
414 &__v->var_part[(i)].aux.offset; }))
416 /* Access VAR's one-part auxiliary data, checking that it is a
417 one-part variable. */
418 #define VAR_LOC_1PAUX(var) __extension__ \
419 (*({ variable *const __v = (var); \
420 gcc_checking_assert (__v->onepart); \
421 &__v->var_part[0].aux.onepaux; }))
424 #define VAR_PART_OFFSET(var, i) ((var)->var_part[(i)].aux.offset)
425 #define VAR_LOC_1PAUX(var) ((var)->var_part[0].aux.onepaux)
428 /* These are accessor macros for the one-part auxiliary data. When
429 convenient for users, they're guarded by tests that the data was
431 #define VAR_LOC_DEP_LST(var) (VAR_LOC_1PAUX (var) \
432 ? VAR_LOC_1PAUX (var)->backlinks \
434 #define VAR_LOC_DEP_LSTP(var) (VAR_LOC_1PAUX (var) \
435 ? &VAR_LOC_1PAUX (var)->backlinks \
437 #define VAR_LOC_FROM(var) (VAR_LOC_1PAUX (var)->from)
438 #define VAR_LOC_DEPTH(var) (VAR_LOC_1PAUX (var)->depth)
439 #define VAR_LOC_DEP_VEC(var) var_loc_dep_vec (var)
441 /* Implements the VAR_LOC_DEP_VEC above as a function to work around
442 a bogus -Wnonnull (PR c/95554). */
444 static inline deps_vec
*
445 var_loc_dep_vec (variable
*var
)
447 return VAR_LOC_1PAUX (var
) ? &VAR_LOC_1PAUX (var
)->deps
: NULL
;
451 typedef unsigned int dvuid
;
453 /* Return the uid of DV. */
456 dv_uid (decl_or_value dv
)
458 if (dv_is_value_p (dv
))
459 return CSELIB_VAL_PTR (dv_as_value (dv
))->uid
;
461 return DECL_UID (dv_as_decl (dv
));
464 /* Compute the hash from the uid. */
466 static inline hashval_t
467 dv_uid2hash (dvuid uid
)
472 /* The hash function for a mask table in a shared_htab chain. */
474 static inline hashval_t
475 dv_htab_hash (decl_or_value dv
)
477 return dv_uid2hash (dv_uid (dv
));
480 static void variable_htab_free (void *);
482 /* Variable hashtable helpers. */
484 struct variable_hasher
: pointer_hash
<variable
>
486 typedef void *compare_type
;
487 static inline hashval_t
hash (const variable
*);
488 static inline bool equal (const variable
*, const void *);
489 static inline void remove (variable
*);
492 /* The hash function for variable_htab, computes the hash value
493 from the declaration of variable X. */
496 variable_hasher::hash (const variable
*v
)
498 return dv_htab_hash (v
->dv
);
501 /* Compare the declaration of variable X with declaration Y. */
504 variable_hasher::equal (const variable
*v
, const void *y
)
506 decl_or_value dv
= CONST_CAST2 (decl_or_value
, const void *, y
);
508 return (dv_as_opaque (v
->dv
) == dv_as_opaque (dv
));
511 /* Free the element of VARIABLE_HTAB (its type is struct variable_def). */
514 variable_hasher::remove (variable
*var
)
516 variable_htab_free (var
);
519 typedef hash_table
<variable_hasher
> variable_table_type
;
520 typedef variable_table_type::iterator variable_iterator_type
;
522 /* Structure for passing some other parameters to function
523 emit_note_insn_var_location. */
524 struct emit_note_data
526 /* The instruction which the note will be emitted before/after. */
529 /* Where the note will be emitted (before/after insn)? */
530 enum emit_note_where where
;
532 /* The variables and values active at this point. */
533 variable_table_type
*vars
;
536 /* Structure holding a refcounted hash table. If refcount > 1,
537 it must be first unshared before modified. */
540 /* Reference count. */
543 /* Actual hash table. */
544 variable_table_type
*htab
;
547 /* Structure holding the IN or OUT set for a basic block. */
550 /* Adjustment of stack offset. */
551 HOST_WIDE_INT stack_adjust
;
553 /* Attributes for registers (lists of attrs). */
554 attrs
*regs
[FIRST_PSEUDO_REGISTER
];
556 /* Variable locations. */
559 /* Vars that is being traversed. */
560 shared_hash
*traversed_vars
;
563 /* The structure (one for each basic block) containing the information
564 needed for variable tracking. */
565 struct variable_tracking_info
567 /* The vector of micro operations. */
568 vec
<micro_operation
> mos
;
570 /* The IN and OUT set for dataflow analysis. */
574 /* The permanent-in dataflow set for this block. This is used to
575 hold values for which we had to compute entry values. ??? This
576 should probably be dynamically allocated, to avoid using more
577 memory in non-debug builds. */
580 /* Has the block been visited in DFS? */
583 /* Has the block been flooded in VTA? */
588 /* Alloc pool for struct attrs_def. */
589 object_allocator
<attrs
> attrs_pool ("attrs pool");
591 /* Alloc pool for struct variable_def with MAX_VAR_PARTS entries. */
593 static pool_allocator var_pool
594 ("variable_def pool", sizeof (variable
) +
595 (MAX_VAR_PARTS
- 1) * sizeof (((variable
*)NULL
)->var_part
[0]));
597 /* Alloc pool for struct variable_def with a single var_part entry. */
598 static pool_allocator valvar_pool
599 ("small variable_def pool", sizeof (variable
));
601 /* Alloc pool for struct location_chain. */
602 static object_allocator
<location_chain
> location_chain_pool
603 ("location_chain pool");
605 /* Alloc pool for struct shared_hash. */
606 static object_allocator
<shared_hash
> shared_hash_pool ("shared_hash pool");
608 /* Alloc pool for struct loc_exp_dep_s for NOT_ONEPART variables. */
609 object_allocator
<loc_exp_dep
> loc_exp_dep_pool ("loc_exp_dep pool");
611 /* Changed variables, notes will be emitted for them. */
612 static variable_table_type
*changed_variables
;
614 /* Shall notes be emitted? */
615 static bool emit_notes
;
617 /* Values whose dynamic location lists have gone empty, but whose
618 cselib location lists are still usable. Use this to hold the
619 current location, the backlinks, etc, during emit_notes. */
620 static variable_table_type
*dropped_values
;
622 /* Empty shared hashtable. */
623 static shared_hash
*empty_shared_hash
;
625 /* Scratch register bitmap used by cselib_expand_value_rtx. */
626 static bitmap scratch_regs
= NULL
;
628 #ifdef HAVE_window_save
629 struct GTY(()) parm_reg
{
635 /* Vector of windowed parameter registers, if any. */
636 static vec
<parm_reg
, va_gc
> *windowed_parm_regs
= NULL
;
639 /* Variable used to tell whether cselib_process_insn called our hook. */
640 static bool cselib_hook_called
;
642 /* Local function prototypes. */
643 static void stack_adjust_offset_pre_post (rtx
, HOST_WIDE_INT
*,
645 static void insn_stack_adjust_offset_pre_post (rtx_insn
*, HOST_WIDE_INT
*,
647 static bool vt_stack_adjustments (void);
649 static void init_attrs_list_set (attrs
**);
650 static void attrs_list_clear (attrs
**);
651 static attrs
*attrs_list_member (attrs
*, decl_or_value
, HOST_WIDE_INT
);
652 static void attrs_list_insert (attrs
**, decl_or_value
, HOST_WIDE_INT
, rtx
);
653 static void attrs_list_copy (attrs
**, attrs
*);
654 static void attrs_list_union (attrs
**, attrs
*);
656 static variable
**unshare_variable (dataflow_set
*set
, variable
**slot
,
657 variable
*var
, enum var_init_status
);
658 static void vars_copy (variable_table_type
*, variable_table_type
*);
659 static tree
var_debug_decl (tree
);
660 static void var_reg_set (dataflow_set
*, rtx
, enum var_init_status
, rtx
);
661 static void var_reg_delete_and_set (dataflow_set
*, rtx
, bool,
662 enum var_init_status
, rtx
);
663 static void var_reg_delete (dataflow_set
*, rtx
, bool);
664 static void var_regno_delete (dataflow_set
*, int);
665 static void var_mem_set (dataflow_set
*, rtx
, enum var_init_status
, rtx
);
666 static void var_mem_delete_and_set (dataflow_set
*, rtx
, bool,
667 enum var_init_status
, rtx
);
668 static void var_mem_delete (dataflow_set
*, rtx
, bool);
670 static void dataflow_set_init (dataflow_set
*);
671 static void dataflow_set_clear (dataflow_set
*);
672 static void dataflow_set_copy (dataflow_set
*, dataflow_set
*);
673 static int variable_union_info_cmp_pos (const void *, const void *);
674 static void dataflow_set_union (dataflow_set
*, dataflow_set
*);
675 static location_chain
*find_loc_in_1pdv (rtx
, variable
*,
676 variable_table_type
*);
677 static bool canon_value_cmp (rtx
, rtx
);
678 static int loc_cmp (rtx
, rtx
);
679 static bool variable_part_different_p (variable_part
*, variable_part
*);
680 static bool onepart_variable_different_p (variable
*, variable
*);
681 static bool variable_different_p (variable
*, variable
*);
682 static bool dataflow_set_different (dataflow_set
*, dataflow_set
*);
683 static void dataflow_set_destroy (dataflow_set
*);
685 static bool track_expr_p (tree
, bool);
686 static void add_uses_1 (rtx
*, void *);
687 static void add_stores (rtx
, const_rtx
, void *);
688 static bool compute_bb_dataflow (basic_block
);
689 static bool vt_find_locations (void);
691 static void dump_attrs_list (attrs
*);
692 static void dump_var (variable
*);
693 static void dump_vars (variable_table_type
*);
694 static void dump_dataflow_set (dataflow_set
*);
695 static void dump_dataflow_sets (void);
697 static void set_dv_changed (decl_or_value
, bool);
698 static void variable_was_changed (variable
*, dataflow_set
*);
699 static variable
**set_slot_part (dataflow_set
*, rtx
, variable
**,
700 decl_or_value
, HOST_WIDE_INT
,
701 enum var_init_status
, rtx
);
702 static void set_variable_part (dataflow_set
*, rtx
,
703 decl_or_value
, HOST_WIDE_INT
,
704 enum var_init_status
, rtx
, enum insert_option
);
705 static variable
**clobber_slot_part (dataflow_set
*, rtx
,
706 variable
**, HOST_WIDE_INT
, rtx
);
707 static void clobber_variable_part (dataflow_set
*, rtx
,
708 decl_or_value
, HOST_WIDE_INT
, rtx
);
709 static variable
**delete_slot_part (dataflow_set
*, rtx
, variable
**,
711 static void delete_variable_part (dataflow_set
*, rtx
,
712 decl_or_value
, HOST_WIDE_INT
);
713 static void emit_notes_in_bb (basic_block
, dataflow_set
*);
714 static void vt_emit_notes (void);
716 static void vt_add_function_parameters (void);
717 static bool vt_initialize (void);
718 static void vt_finalize (void);
720 /* Callback for stack_adjust_offset_pre_post, called via for_each_inc_dec. */
723 stack_adjust_offset_pre_post_cb (rtx
, rtx op
, rtx dest
, rtx src
, rtx srcoff
,
726 if (dest
!= stack_pointer_rtx
)
729 switch (GET_CODE (op
))
733 ((HOST_WIDE_INT
*)arg
)[0] -= INTVAL (srcoff
);
737 ((HOST_WIDE_INT
*)arg
)[1] -= INTVAL (srcoff
);
741 /* We handle only adjustments by constant amount. */
742 gcc_assert (GET_CODE (src
) == PLUS
743 && CONST_INT_P (XEXP (src
, 1))
744 && XEXP (src
, 0) == stack_pointer_rtx
);
745 ((HOST_WIDE_INT
*)arg
)[GET_CODE (op
) == POST_MODIFY
]
746 -= INTVAL (XEXP (src
, 1));
753 /* Given a SET, calculate the amount of stack adjustment it contains
754 PRE- and POST-modifying stack pointer.
755 This function is similar to stack_adjust_offset. */
758 stack_adjust_offset_pre_post (rtx pattern
, HOST_WIDE_INT
*pre
,
761 rtx src
= SET_SRC (pattern
);
762 rtx dest
= SET_DEST (pattern
);
765 if (dest
== stack_pointer_rtx
)
767 /* (set (reg sp) (plus (reg sp) (const_int))) */
768 code
= GET_CODE (src
);
769 if (! (code
== PLUS
|| code
== MINUS
)
770 || XEXP (src
, 0) != stack_pointer_rtx
771 || !CONST_INT_P (XEXP (src
, 1)))
775 *post
+= INTVAL (XEXP (src
, 1));
777 *post
-= INTVAL (XEXP (src
, 1));
780 HOST_WIDE_INT res
[2] = { 0, 0 };
781 for_each_inc_dec (pattern
, stack_adjust_offset_pre_post_cb
, res
);
786 /* Given an INSN, calculate the amount of stack adjustment it contains
787 PRE- and POST-modifying stack pointer. */
790 insn_stack_adjust_offset_pre_post (rtx_insn
*insn
, HOST_WIDE_INT
*pre
,
798 pattern
= PATTERN (insn
);
799 if (RTX_FRAME_RELATED_P (insn
))
801 rtx expr
= find_reg_note (insn
, REG_FRAME_RELATED_EXPR
, NULL_RTX
);
803 pattern
= XEXP (expr
, 0);
806 if (GET_CODE (pattern
) == SET
)
807 stack_adjust_offset_pre_post (pattern
, pre
, post
);
808 else if (GET_CODE (pattern
) == PARALLEL
809 || GET_CODE (pattern
) == SEQUENCE
)
813 /* There may be stack adjustments inside compound insns. Search
815 for ( i
= XVECLEN (pattern
, 0) - 1; i
>= 0; i
--)
816 if (GET_CODE (XVECEXP (pattern
, 0, i
)) == SET
)
817 stack_adjust_offset_pre_post (XVECEXP (pattern
, 0, i
), pre
, post
);
821 /* Compute stack adjustments for all blocks by traversing DFS tree.
822 Return true when the adjustments on all incoming edges are consistent.
823 Heavily borrowed from pre_and_rev_post_order_compute. */
826 vt_stack_adjustments (void)
828 edge_iterator
*stack
;
831 /* Initialize entry block. */
832 VTI (ENTRY_BLOCK_PTR_FOR_FN (cfun
))->visited
= true;
833 VTI (ENTRY_BLOCK_PTR_FOR_FN (cfun
))->in
.stack_adjust
834 = INCOMING_FRAME_SP_OFFSET
;
835 VTI (ENTRY_BLOCK_PTR_FOR_FN (cfun
))->out
.stack_adjust
836 = INCOMING_FRAME_SP_OFFSET
;
838 /* Allocate stack for back-tracking up CFG. */
839 stack
= XNEWVEC (edge_iterator
, n_basic_blocks_for_fn (cfun
) + 1);
842 /* Push the first edge on to the stack. */
843 stack
[sp
++] = ei_start (ENTRY_BLOCK_PTR_FOR_FN (cfun
)->succs
);
851 /* Look at the edge on the top of the stack. */
853 src
= ei_edge (ei
)->src
;
854 dest
= ei_edge (ei
)->dest
;
856 /* Check if the edge destination has been visited yet. */
857 if (!VTI (dest
)->visited
)
860 HOST_WIDE_INT pre
, post
, offset
;
861 VTI (dest
)->visited
= true;
862 VTI (dest
)->in
.stack_adjust
= offset
= VTI (src
)->out
.stack_adjust
;
864 if (dest
!= EXIT_BLOCK_PTR_FOR_FN (cfun
))
865 for (insn
= BB_HEAD (dest
);
866 insn
!= NEXT_INSN (BB_END (dest
));
867 insn
= NEXT_INSN (insn
))
870 insn_stack_adjust_offset_pre_post (insn
, &pre
, &post
);
871 offset
+= pre
+ post
;
874 VTI (dest
)->out
.stack_adjust
= offset
;
876 if (EDGE_COUNT (dest
->succs
) > 0)
877 /* Since the DEST node has been visited for the first
878 time, check its successors. */
879 stack
[sp
++] = ei_start (dest
->succs
);
883 /* We can end up with different stack adjustments for the exit block
884 of a shrink-wrapped function if stack_adjust_offset_pre_post
885 doesn't understand the rtx pattern used to restore the stack
886 pointer in the epilogue. For example, on s390(x), the stack
887 pointer is often restored via a load-multiple instruction
888 and so no stack_adjust offset is recorded for it. This means
889 that the stack offset at the end of the epilogue block is the
890 same as the offset before the epilogue, whereas other paths
891 to the exit block will have the correct stack_adjust.
893 It is safe to ignore these differences because (a) we never
894 use the stack_adjust for the exit block in this pass and
895 (b) dwarf2cfi checks whether the CFA notes in a shrink-wrapped
896 function are correct.
898 We must check whether the adjustments on other edges are
900 if (dest
!= EXIT_BLOCK_PTR_FOR_FN (cfun
)
901 && VTI (dest
)->in
.stack_adjust
!= VTI (src
)->out
.stack_adjust
)
907 if (! ei_one_before_end_p (ei
))
908 /* Go to the next edge. */
909 ei_next (&stack
[sp
- 1]);
911 /* Return to previous level if there are no more edges. */
920 /* arg_pointer_rtx resp. frame_pointer_rtx if stack_pointer_rtx or
921 hard_frame_pointer_rtx is being mapped to it and offset for it. */
922 static rtx cfa_base_rtx
;
923 static HOST_WIDE_INT cfa_base_offset
;
925 /* Compute a CFA-based value for an ADJUSTMENT made to stack_pointer_rtx
926 or hard_frame_pointer_rtx. */
929 compute_cfa_pointer (poly_int64 adjustment
)
931 return plus_constant (Pmode
, cfa_base_rtx
, adjustment
+ cfa_base_offset
);
934 /* Adjustment for hard_frame_pointer_rtx to cfa base reg,
935 or -1 if the replacement shouldn't be done. */
936 static poly_int64 hard_frame_pointer_adjustment
= -1;
938 /* Data for adjust_mems callback. */
940 class adjust_mem_data
944 machine_mode mem_mode
;
945 HOST_WIDE_INT stack_adjust
;
946 auto_vec
<rtx
> side_effects
;
949 /* Helper for adjust_mems. Return true if X is suitable for
950 transformation of wider mode arithmetics to narrower mode. */
953 use_narrower_mode_test (rtx x
, const_rtx subreg
)
955 subrtx_var_iterator::array_type array
;
956 FOR_EACH_SUBRTX_VAR (iter
, array
, x
, NONCONST
)
960 iter
.skip_subrtxes ();
962 switch (GET_CODE (x
))
965 if (cselib_lookup (x
, GET_MODE (SUBREG_REG (subreg
)), 0, VOIDmode
))
967 if (!validate_subreg (GET_MODE (subreg
), GET_MODE (x
), x
,
968 subreg_lowpart_offset (GET_MODE (subreg
),
977 if (GET_MODE (XEXP (x
, 1)) != VOIDmode
)
979 enum machine_mode mode
= GET_MODE (subreg
);
980 rtx op1
= XEXP (x
, 1);
981 enum machine_mode op1_mode
= GET_MODE (op1
);
982 if (GET_MODE_PRECISION (as_a
<scalar_int_mode
> (mode
))
983 < GET_MODE_PRECISION (as_a
<scalar_int_mode
> (op1_mode
)))
985 poly_uint64 byte
= subreg_lowpart_offset (mode
, op1_mode
);
986 if (GET_CODE (op1
) == SUBREG
|| GET_CODE (op1
) == CONCAT
)
988 if (!simplify_subreg (mode
, op1
, op1_mode
, byte
))
991 else if (!validate_subreg (mode
, op1_mode
, op1
, byte
))
995 iter
.substitute (XEXP (x
, 0));
1004 /* Transform X into narrower mode MODE from wider mode WMODE. */
1007 use_narrower_mode (rtx x
, scalar_int_mode mode
, scalar_int_mode wmode
)
1011 return lowpart_subreg (mode
, x
, wmode
);
1012 switch (GET_CODE (x
))
1015 return lowpart_subreg (mode
, x
, wmode
);
1019 op0
= use_narrower_mode (XEXP (x
, 0), mode
, wmode
);
1020 op1
= use_narrower_mode (XEXP (x
, 1), mode
, wmode
);
1021 return simplify_gen_binary (GET_CODE (x
), mode
, op0
, op1
);
1023 op0
= use_narrower_mode (XEXP (x
, 0), mode
, wmode
);
1025 /* Ensure shift amount is not wider than mode. */
1026 if (GET_MODE (op1
) == VOIDmode
)
1027 op1
= lowpart_subreg (mode
, op1
, wmode
);
1028 else if (GET_MODE_PRECISION (mode
)
1029 < GET_MODE_PRECISION (as_a
<scalar_int_mode
> (GET_MODE (op1
))))
1030 op1
= lowpart_subreg (mode
, op1
, GET_MODE (op1
));
1031 return simplify_gen_binary (ASHIFT
, mode
, op0
, op1
);
1037 /* Helper function for adjusting used MEMs. */
1040 adjust_mems (rtx loc
, const_rtx old_rtx
, void *data
)
1042 class adjust_mem_data
*amd
= (class adjust_mem_data
*) data
;
1043 rtx mem
, addr
= loc
, tem
;
1044 machine_mode mem_mode_save
;
1046 scalar_int_mode tem_mode
, tem_subreg_mode
;
1048 switch (GET_CODE (loc
))
1051 /* Don't do any sp or fp replacements outside of MEM addresses
1053 if (amd
->mem_mode
== VOIDmode
&& amd
->store
)
1055 if (loc
== stack_pointer_rtx
1056 && !frame_pointer_needed
1058 return compute_cfa_pointer (amd
->stack_adjust
);
1059 else if (loc
== hard_frame_pointer_rtx
1060 && frame_pointer_needed
1061 && maybe_ne (hard_frame_pointer_adjustment
, -1)
1063 return compute_cfa_pointer (hard_frame_pointer_adjustment
);
1064 gcc_checking_assert (loc
!= virtual_incoming_args_rtx
);
1070 mem
= targetm
.delegitimize_address (mem
);
1071 if (mem
!= loc
&& !MEM_P (mem
))
1072 return simplify_replace_fn_rtx (mem
, old_rtx
, adjust_mems
, data
);
1075 addr
= XEXP (mem
, 0);
1076 mem_mode_save
= amd
->mem_mode
;
1077 amd
->mem_mode
= GET_MODE (mem
);
1078 store_save
= amd
->store
;
1080 addr
= simplify_replace_fn_rtx (addr
, old_rtx
, adjust_mems
, data
);
1081 amd
->store
= store_save
;
1082 amd
->mem_mode
= mem_mode_save
;
1084 addr
= targetm
.delegitimize_address (addr
);
1085 if (addr
!= XEXP (mem
, 0))
1086 mem
= replace_equiv_address_nv (mem
, addr
);
1088 mem
= avoid_constant_pool_reference (mem
);
1092 size
= GET_MODE_SIZE (amd
->mem_mode
);
1093 addr
= plus_constant (GET_MODE (loc
), XEXP (loc
, 0),
1094 GET_CODE (loc
) == PRE_INC
? size
: -size
);
1099 addr
= XEXP (loc
, 0);
1100 gcc_assert (amd
->mem_mode
!= VOIDmode
&& amd
->mem_mode
!= BLKmode
);
1101 addr
= simplify_replace_fn_rtx (addr
, old_rtx
, adjust_mems
, data
);
1102 size
= GET_MODE_SIZE (amd
->mem_mode
);
1103 tem
= plus_constant (GET_MODE (loc
), XEXP (loc
, 0),
1104 (GET_CODE (loc
) == PRE_INC
1105 || GET_CODE (loc
) == POST_INC
) ? size
: -size
);
1106 store_save
= amd
->store
;
1108 tem
= simplify_replace_fn_rtx (tem
, old_rtx
, adjust_mems
, data
);
1109 amd
->store
= store_save
;
1110 amd
->side_effects
.safe_push (gen_rtx_SET (XEXP (loc
, 0), tem
));
1113 addr
= XEXP (loc
, 1);
1117 addr
= XEXP (loc
, 0);
1118 gcc_assert (amd
->mem_mode
!= VOIDmode
);
1119 addr
= simplify_replace_fn_rtx (addr
, old_rtx
, adjust_mems
, data
);
1120 store_save
= amd
->store
;
1122 tem
= simplify_replace_fn_rtx (XEXP (loc
, 1), old_rtx
,
1124 amd
->store
= store_save
;
1125 amd
->side_effects
.safe_push (gen_rtx_SET (XEXP (loc
, 0), tem
));
1128 /* First try without delegitimization of whole MEMs and
1129 avoid_constant_pool_reference, which is more likely to succeed. */
1130 store_save
= amd
->store
;
1132 addr
= simplify_replace_fn_rtx (SUBREG_REG (loc
), old_rtx
, adjust_mems
,
1134 amd
->store
= store_save
;
1135 mem
= simplify_replace_fn_rtx (addr
, old_rtx
, adjust_mems
, data
);
1136 if (mem
== SUBREG_REG (loc
))
1141 tem
= simplify_gen_subreg (GET_MODE (loc
), mem
,
1142 GET_MODE (SUBREG_REG (loc
)),
1146 tem
= simplify_gen_subreg (GET_MODE (loc
), addr
,
1147 GET_MODE (SUBREG_REG (loc
)),
1149 if (tem
== NULL_RTX
)
1150 tem
= gen_rtx_raw_SUBREG (GET_MODE (loc
), addr
, SUBREG_BYTE (loc
));
1152 if (MAY_HAVE_DEBUG_BIND_INSNS
1153 && GET_CODE (tem
) == SUBREG
1154 && (GET_CODE (SUBREG_REG (tem
)) == PLUS
1155 || GET_CODE (SUBREG_REG (tem
)) == MINUS
1156 || GET_CODE (SUBREG_REG (tem
)) == MULT
1157 || GET_CODE (SUBREG_REG (tem
)) == ASHIFT
)
1158 && is_a
<scalar_int_mode
> (GET_MODE (tem
), &tem_mode
)
1159 && is_a
<scalar_int_mode
> (GET_MODE (SUBREG_REG (tem
)),
1161 && (GET_MODE_PRECISION (tem_mode
)
1162 < GET_MODE_PRECISION (tem_subreg_mode
))
1163 && subreg_lowpart_p (tem
)
1164 && use_narrower_mode_test (SUBREG_REG (tem
), tem
))
1165 return use_narrower_mode (SUBREG_REG (tem
), tem_mode
, tem_subreg_mode
);
1168 /* Don't do any replacements in second and following
1169 ASM_OPERANDS of inline-asm with multiple sets.
1170 ASM_OPERANDS_INPUT_VEC, ASM_OPERANDS_INPUT_CONSTRAINT_VEC
1171 and ASM_OPERANDS_LABEL_VEC need to be equal between
1172 all the ASM_OPERANDs in the insn and adjust_insn will
1174 if (ASM_OPERANDS_OUTPUT_IDX (loc
) != 0)
1183 /* Helper function for replacement of uses. */
1186 adjust_mem_uses (rtx
*x
, void *data
)
1188 rtx new_x
= simplify_replace_fn_rtx (*x
, NULL_RTX
, adjust_mems
, data
);
1190 validate_change (NULL_RTX
, x
, new_x
, true);
1193 /* Helper function for replacement of stores. */
1196 adjust_mem_stores (rtx loc
, const_rtx expr
, void *data
)
1200 rtx new_dest
= simplify_replace_fn_rtx (SET_DEST (expr
), NULL_RTX
,
1202 if (new_dest
!= SET_DEST (expr
))
1204 rtx xexpr
= CONST_CAST_RTX (expr
);
1205 validate_change (NULL_RTX
, &SET_DEST (xexpr
), new_dest
, true);
1210 /* Simplify INSN. Remove all {PRE,POST}_{INC,DEC,MODIFY} rtxes,
1211 replace them with their value in the insn and add the side-effects
1212 as other sets to the insn. */
1215 adjust_insn (basic_block bb
, rtx_insn
*insn
)
1219 #ifdef HAVE_window_save
1220 /* If the target machine has an explicit window save instruction, the
1221 transformation OUTGOING_REGNO -> INCOMING_REGNO is done there. */
1222 if (RTX_FRAME_RELATED_P (insn
)
1223 && find_reg_note (insn
, REG_CFA_WINDOW_SAVE
, NULL_RTX
))
1225 unsigned int i
, nregs
= vec_safe_length (windowed_parm_regs
);
1226 rtx rtl
= gen_rtx_PARALLEL (VOIDmode
, rtvec_alloc (nregs
* 2));
1229 FOR_EACH_VEC_SAFE_ELT (windowed_parm_regs
, i
, p
)
1231 XVECEXP (rtl
, 0, i
* 2)
1232 = gen_rtx_SET (p
->incoming
, p
->outgoing
);
1233 /* Do not clobber the attached DECL, but only the REG. */
1234 XVECEXP (rtl
, 0, i
* 2 + 1)
1235 = gen_rtx_CLOBBER (GET_MODE (p
->outgoing
),
1236 gen_raw_REG (GET_MODE (p
->outgoing
),
1237 REGNO (p
->outgoing
)));
1240 validate_change (NULL_RTX
, &PATTERN (insn
), rtl
, true);
1245 adjust_mem_data amd
;
1246 amd
.mem_mode
= VOIDmode
;
1247 amd
.stack_adjust
= -VTI (bb
)->out
.stack_adjust
;
1250 note_stores (insn
, adjust_mem_stores
, &amd
);
1253 if (GET_CODE (PATTERN (insn
)) == PARALLEL
1254 && asm_noperands (PATTERN (insn
)) > 0
1255 && GET_CODE (XVECEXP (PATTERN (insn
), 0, 0)) == SET
)
1260 /* inline-asm with multiple sets is tiny bit more complicated,
1261 because the 3 vectors in ASM_OPERANDS need to be shared between
1262 all ASM_OPERANDS in the instruction. adjust_mems will
1263 not touch ASM_OPERANDS other than the first one, asm_noperands
1264 test above needs to be called before that (otherwise it would fail)
1265 and afterwards this code fixes it up. */
1266 note_uses (&PATTERN (insn
), adjust_mem_uses
, &amd
);
1267 body
= PATTERN (insn
);
1268 set0
= XVECEXP (body
, 0, 0);
1269 gcc_checking_assert (GET_CODE (set0
) == SET
1270 && GET_CODE (SET_SRC (set0
)) == ASM_OPERANDS
1271 && ASM_OPERANDS_OUTPUT_IDX (SET_SRC (set0
)) == 0);
1272 for (i
= 1; i
< XVECLEN (body
, 0); i
++)
1273 if (GET_CODE (XVECEXP (body
, 0, i
)) != SET
)
1277 set
= XVECEXP (body
, 0, i
);
1278 gcc_checking_assert (GET_CODE (SET_SRC (set
)) == ASM_OPERANDS
1279 && ASM_OPERANDS_OUTPUT_IDX (SET_SRC (set
))
1281 if (ASM_OPERANDS_INPUT_VEC (SET_SRC (set
))
1282 != ASM_OPERANDS_INPUT_VEC (SET_SRC (set0
))
1283 || ASM_OPERANDS_INPUT_CONSTRAINT_VEC (SET_SRC (set
))
1284 != ASM_OPERANDS_INPUT_CONSTRAINT_VEC (SET_SRC (set0
))
1285 || ASM_OPERANDS_LABEL_VEC (SET_SRC (set
))
1286 != ASM_OPERANDS_LABEL_VEC (SET_SRC (set0
)))
1288 rtx newsrc
= shallow_copy_rtx (SET_SRC (set
));
1289 ASM_OPERANDS_INPUT_VEC (newsrc
)
1290 = ASM_OPERANDS_INPUT_VEC (SET_SRC (set0
));
1291 ASM_OPERANDS_INPUT_CONSTRAINT_VEC (newsrc
)
1292 = ASM_OPERANDS_INPUT_CONSTRAINT_VEC (SET_SRC (set0
));
1293 ASM_OPERANDS_LABEL_VEC (newsrc
)
1294 = ASM_OPERANDS_LABEL_VEC (SET_SRC (set0
));
1295 validate_change (NULL_RTX
, &SET_SRC (set
), newsrc
, true);
1300 note_uses (&PATTERN (insn
), adjust_mem_uses
, &amd
);
1302 /* For read-only MEMs containing some constant, prefer those
1304 set
= single_set (insn
);
1305 if (set
&& MEM_P (SET_SRC (set
)) && MEM_READONLY_P (SET_SRC (set
)))
1307 rtx note
= find_reg_equal_equiv_note (insn
);
1309 if (note
&& CONSTANT_P (XEXP (note
, 0)))
1310 validate_change (NULL_RTX
, &SET_SRC (set
), XEXP (note
, 0), true);
1313 if (!amd
.side_effects
.is_empty ())
1318 pat
= &PATTERN (insn
);
1319 if (GET_CODE (*pat
) == COND_EXEC
)
1320 pat
= &COND_EXEC_CODE (*pat
);
1321 if (GET_CODE (*pat
) == PARALLEL
)
1322 oldn
= XVECLEN (*pat
, 0);
1325 unsigned int newn
= amd
.side_effects
.length ();
1326 new_pat
= gen_rtx_PARALLEL (VOIDmode
, rtvec_alloc (oldn
+ newn
));
1327 if (GET_CODE (*pat
) == PARALLEL
)
1328 for (i
= 0; i
< oldn
; i
++)
1329 XVECEXP (new_pat
, 0, i
) = XVECEXP (*pat
, 0, i
);
1331 XVECEXP (new_pat
, 0, 0) = *pat
;
1335 FOR_EACH_VEC_ELT_REVERSE (amd
.side_effects
, j
, effect
)
1336 XVECEXP (new_pat
, 0, j
+ oldn
) = effect
;
1337 validate_change (NULL_RTX
, pat
, new_pat
, true);
1341 /* Return the DEBUG_EXPR of a DEBUG_EXPR_DECL or the VALUE in DV. */
1343 dv_as_rtx (decl_or_value dv
)
1347 if (dv_is_value_p (dv
))
1348 return dv_as_value (dv
);
1350 decl
= dv_as_decl (dv
);
1352 gcc_checking_assert (TREE_CODE (decl
) == DEBUG_EXPR_DECL
);
1353 return DECL_RTL_KNOWN_SET (decl
);
1356 /* Return nonzero if a decl_or_value must not have more than one
1357 variable part. The returned value discriminates among various
1358 kinds of one-part DVs ccording to enum onepart_enum. */
1359 static inline onepart_enum
1360 dv_onepart_p (decl_or_value dv
)
1364 if (!MAY_HAVE_DEBUG_BIND_INSNS
)
1367 if (dv_is_value_p (dv
))
1368 return ONEPART_VALUE
;
1370 decl
= dv_as_decl (dv
);
1372 if (TREE_CODE (decl
) == DEBUG_EXPR_DECL
)
1373 return ONEPART_DEXPR
;
1375 if (target_for_debug_bind (decl
) != NULL_TREE
)
1376 return ONEPART_VDECL
;
1381 /* Return the variable pool to be used for a dv of type ONEPART. */
1382 static inline pool_allocator
&
1383 onepart_pool (onepart_enum onepart
)
1385 return onepart
? valvar_pool
: var_pool
;
1388 /* Allocate a variable_def from the corresponding variable pool. */
1389 static inline variable
*
1390 onepart_pool_allocate (onepart_enum onepart
)
1392 return (variable
*) onepart_pool (onepart
).allocate ();
1395 /* Build a decl_or_value out of a decl. */
1396 static inline decl_or_value
1397 dv_from_decl (tree decl
)
1401 gcc_checking_assert (dv_is_decl_p (dv
));
1405 /* Build a decl_or_value out of a value. */
1406 static inline decl_or_value
1407 dv_from_value (rtx value
)
1411 gcc_checking_assert (dv_is_value_p (dv
));
1415 /* Return a value or the decl of a debug_expr as a decl_or_value. */
1416 static inline decl_or_value
1421 switch (GET_CODE (x
))
1424 dv
= dv_from_decl (DEBUG_EXPR_TREE_DECL (x
));
1425 gcc_checking_assert (DECL_RTL_KNOWN_SET (DEBUG_EXPR_TREE_DECL (x
)) == x
);
1429 dv
= dv_from_value (x
);
1439 extern void debug_dv (decl_or_value dv
);
1442 debug_dv (decl_or_value dv
)
1444 if (dv_is_value_p (dv
))
1445 debug_rtx (dv_as_value (dv
));
1447 debug_generic_stmt (dv_as_decl (dv
));
1450 static void loc_exp_dep_clear (variable
*var
);
1452 /* Free the element of VARIABLE_HTAB (its type is struct variable_def). */
1455 variable_htab_free (void *elem
)
1458 variable
*var
= (variable
*) elem
;
1459 location_chain
*node
, *next
;
1461 gcc_checking_assert (var
->refcount
> 0);
1464 if (var
->refcount
> 0)
1467 for (i
= 0; i
< var
->n_var_parts
; i
++)
1469 for (node
= var
->var_part
[i
].loc_chain
; node
; node
= next
)
1474 var
->var_part
[i
].loc_chain
= NULL
;
1476 if (var
->onepart
&& VAR_LOC_1PAUX (var
))
1478 loc_exp_dep_clear (var
);
1479 if (VAR_LOC_DEP_LST (var
))
1480 VAR_LOC_DEP_LST (var
)->pprev
= NULL
;
1481 XDELETE (VAR_LOC_1PAUX (var
));
1482 /* These may be reused across functions, so reset
1484 if (var
->onepart
== ONEPART_DEXPR
)
1485 set_dv_changed (var
->dv
, true);
1487 onepart_pool (var
->onepart
).remove (var
);
1490 /* Initialize the set (array) SET of attrs to empty lists. */
1493 init_attrs_list_set (attrs
**set
)
1497 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
1501 /* Make the list *LISTP empty. */
1504 attrs_list_clear (attrs
**listp
)
1508 for (list
= *listp
; list
; list
= next
)
1516 /* Return true if the pair of DECL and OFFSET is the member of the LIST. */
1519 attrs_list_member (attrs
*list
, decl_or_value dv
, HOST_WIDE_INT offset
)
1521 for (; list
; list
= list
->next
)
1522 if (dv_as_opaque (list
->dv
) == dv_as_opaque (dv
) && list
->offset
== offset
)
1527 /* Insert the triplet DECL, OFFSET, LOC to the list *LISTP. */
1530 attrs_list_insert (attrs
**listp
, decl_or_value dv
,
1531 HOST_WIDE_INT offset
, rtx loc
)
1533 attrs
*list
= new attrs
;
1536 list
->offset
= offset
;
1537 list
->next
= *listp
;
1541 /* Copy all nodes from SRC and create a list *DSTP of the copies. */
1544 attrs_list_copy (attrs
**dstp
, attrs
*src
)
1546 attrs_list_clear (dstp
);
1547 for (; src
; src
= src
->next
)
1549 attrs
*n
= new attrs
;
1552 n
->offset
= src
->offset
;
1558 /* Add all nodes from SRC which are not in *DSTP to *DSTP. */
1561 attrs_list_union (attrs
**dstp
, attrs
*src
)
1563 for (; src
; src
= src
->next
)
1565 if (!attrs_list_member (*dstp
, src
->dv
, src
->offset
))
1566 attrs_list_insert (dstp
, src
->dv
, src
->offset
, src
->loc
);
1570 /* Combine nodes that are not onepart nodes from SRC and SRC2 into
1574 attrs_list_mpdv_union (attrs
**dstp
, attrs
*src
, attrs
*src2
)
1576 gcc_assert (!*dstp
);
1577 for (; src
; src
= src
->next
)
1579 if (!dv_onepart_p (src
->dv
))
1580 attrs_list_insert (dstp
, src
->dv
, src
->offset
, src
->loc
);
1582 for (src
= src2
; src
; src
= src
->next
)
1584 if (!dv_onepart_p (src
->dv
)
1585 && !attrs_list_member (*dstp
, src
->dv
, src
->offset
))
1586 attrs_list_insert (dstp
, src
->dv
, src
->offset
, src
->loc
);
1590 /* Shared hashtable support. */
1592 /* Return true if VARS is shared. */
1595 shared_hash_shared (shared_hash
*vars
)
1597 return vars
->refcount
> 1;
1600 /* Return the hash table for VARS. */
1602 static inline variable_table_type
*
1603 shared_hash_htab (shared_hash
*vars
)
1608 /* Return true if VAR is shared, or maybe because VARS is shared. */
1611 shared_var_p (variable
*var
, shared_hash
*vars
)
1613 /* Don't count an entry in the changed_variables table as a duplicate. */
1614 return ((var
->refcount
> 1 + (int) var
->in_changed_variables
)
1615 || shared_hash_shared (vars
));
1618 /* Copy variables into a new hash table. */
1620 static shared_hash
*
1621 shared_hash_unshare (shared_hash
*vars
)
1623 shared_hash
*new_vars
= new shared_hash
;
1624 gcc_assert (vars
->refcount
> 1);
1625 new_vars
->refcount
= 1;
1626 new_vars
->htab
= new variable_table_type (vars
->htab
->elements () + 3);
1627 vars_copy (new_vars
->htab
, vars
->htab
);
1632 /* Increment reference counter on VARS and return it. */
1634 static inline shared_hash
*
1635 shared_hash_copy (shared_hash
*vars
)
1641 /* Decrement reference counter and destroy hash table if not shared
1645 shared_hash_destroy (shared_hash
*vars
)
1647 gcc_checking_assert (vars
->refcount
> 0);
1648 if (--vars
->refcount
== 0)
1655 /* Unshare *PVARS if shared and return slot for DV. If INS is
1656 INSERT, insert it if not already present. */
1658 static inline variable
**
1659 shared_hash_find_slot_unshare_1 (shared_hash
**pvars
, decl_or_value dv
,
1660 hashval_t dvhash
, enum insert_option ins
)
1662 if (shared_hash_shared (*pvars
))
1663 *pvars
= shared_hash_unshare (*pvars
);
1664 return shared_hash_htab (*pvars
)->find_slot_with_hash (dv
, dvhash
, ins
);
1667 static inline variable
**
1668 shared_hash_find_slot_unshare (shared_hash
**pvars
, decl_or_value dv
,
1669 enum insert_option ins
)
1671 return shared_hash_find_slot_unshare_1 (pvars
, dv
, dv_htab_hash (dv
), ins
);
1674 /* Return slot for DV, if it is already present in the hash table.
1675 If it is not present, insert it only VARS is not shared, otherwise
1678 static inline variable
**
1679 shared_hash_find_slot_1 (shared_hash
*vars
, decl_or_value dv
, hashval_t dvhash
)
1681 return shared_hash_htab (vars
)->find_slot_with_hash (dv
, dvhash
,
1682 shared_hash_shared (vars
)
1683 ? NO_INSERT
: INSERT
);
1686 static inline variable
**
1687 shared_hash_find_slot (shared_hash
*vars
, decl_or_value dv
)
1689 return shared_hash_find_slot_1 (vars
, dv
, dv_htab_hash (dv
));
1692 /* Return slot for DV only if it is already present in the hash table. */
1694 static inline variable
**
1695 shared_hash_find_slot_noinsert_1 (shared_hash
*vars
, decl_or_value dv
,
1698 return shared_hash_htab (vars
)->find_slot_with_hash (dv
, dvhash
, NO_INSERT
);
1701 static inline variable
**
1702 shared_hash_find_slot_noinsert (shared_hash
*vars
, decl_or_value dv
)
1704 return shared_hash_find_slot_noinsert_1 (vars
, dv
, dv_htab_hash (dv
));
1707 /* Return variable for DV or NULL if not already present in the hash
1710 static inline variable
*
1711 shared_hash_find_1 (shared_hash
*vars
, decl_or_value dv
, hashval_t dvhash
)
1713 return shared_hash_htab (vars
)->find_with_hash (dv
, dvhash
);
1716 static inline variable
*
1717 shared_hash_find (shared_hash
*vars
, decl_or_value dv
)
1719 return shared_hash_find_1 (vars
, dv
, dv_htab_hash (dv
));
1722 /* Return true if TVAL is better than CVAL as a canonival value. We
1723 choose lowest-numbered VALUEs, using the RTX address as a
1724 tie-breaker. The idea is to arrange them into a star topology,
1725 such that all of them are at most one step away from the canonical
1726 value, and the canonical value has backlinks to all of them, in
1727 addition to all the actual locations. We don't enforce this
1728 topology throughout the entire dataflow analysis, though.
1732 canon_value_cmp (rtx tval
, rtx cval
)
1735 || CSELIB_VAL_PTR (tval
)->uid
< CSELIB_VAL_PTR (cval
)->uid
;
1738 static bool dst_can_be_shared
;
1740 /* Return a copy of a variable VAR and insert it to dataflow set SET. */
1743 unshare_variable (dataflow_set
*set
, variable
**slot
, variable
*var
,
1744 enum var_init_status initialized
)
1749 new_var
= onepart_pool_allocate (var
->onepart
);
1750 new_var
->dv
= var
->dv
;
1751 new_var
->refcount
= 1;
1753 new_var
->n_var_parts
= var
->n_var_parts
;
1754 new_var
->onepart
= var
->onepart
;
1755 new_var
->in_changed_variables
= false;
1757 if (! flag_var_tracking_uninit
)
1758 initialized
= VAR_INIT_STATUS_INITIALIZED
;
1760 for (i
= 0; i
< var
->n_var_parts
; i
++)
1762 location_chain
*node
;
1763 location_chain
**nextp
;
1765 if (i
== 0 && var
->onepart
)
1767 /* One-part auxiliary data is only used while emitting
1768 notes, so propagate it to the new variable in the active
1769 dataflow set. If we're not emitting notes, this will be
1771 gcc_checking_assert (!VAR_LOC_1PAUX (var
) || emit_notes
);
1772 VAR_LOC_1PAUX (new_var
) = VAR_LOC_1PAUX (var
);
1773 VAR_LOC_1PAUX (var
) = NULL
;
1776 VAR_PART_OFFSET (new_var
, i
) = VAR_PART_OFFSET (var
, i
);
1777 nextp
= &new_var
->var_part
[i
].loc_chain
;
1778 for (node
= var
->var_part
[i
].loc_chain
; node
; node
= node
->next
)
1780 location_chain
*new_lc
;
1782 new_lc
= new location_chain
;
1783 new_lc
->next
= NULL
;
1784 if (node
->init
> initialized
)
1785 new_lc
->init
= node
->init
;
1787 new_lc
->init
= initialized
;
1788 if (node
->set_src
&& !(MEM_P (node
->set_src
)))
1789 new_lc
->set_src
= node
->set_src
;
1791 new_lc
->set_src
= NULL
;
1792 new_lc
->loc
= node
->loc
;
1795 nextp
= &new_lc
->next
;
1798 new_var
->var_part
[i
].cur_loc
= var
->var_part
[i
].cur_loc
;
1801 dst_can_be_shared
= false;
1802 if (shared_hash_shared (set
->vars
))
1803 slot
= shared_hash_find_slot_unshare (&set
->vars
, var
->dv
, NO_INSERT
);
1804 else if (set
->traversed_vars
&& set
->vars
!= set
->traversed_vars
)
1805 slot
= shared_hash_find_slot_noinsert (set
->vars
, var
->dv
);
1807 if (var
->in_changed_variables
)
1810 = changed_variables
->find_slot_with_hash (var
->dv
,
1811 dv_htab_hash (var
->dv
),
1813 gcc_assert (*cslot
== (void *) var
);
1814 var
->in_changed_variables
= false;
1815 variable_htab_free (var
);
1817 new_var
->in_changed_variables
= true;
1822 /* Copy all variables from hash table SRC to hash table DST. */
1825 vars_copy (variable_table_type
*dst
, variable_table_type
*src
)
1827 variable_iterator_type hi
;
1830 FOR_EACH_HASH_TABLE_ELEMENT (*src
, var
, variable
, hi
)
1834 dstp
= dst
->find_slot_with_hash (var
->dv
, dv_htab_hash (var
->dv
),
1840 /* Map a decl to its main debug decl. */
1843 var_debug_decl (tree decl
)
1845 if (decl
&& VAR_P (decl
) && DECL_HAS_DEBUG_EXPR_P (decl
))
1847 tree debugdecl
= DECL_DEBUG_EXPR (decl
);
1848 if (DECL_P (debugdecl
))
1855 /* Set the register LOC to contain DV, OFFSET. */
1858 var_reg_decl_set (dataflow_set
*set
, rtx loc
, enum var_init_status initialized
,
1859 decl_or_value dv
, HOST_WIDE_INT offset
, rtx set_src
,
1860 enum insert_option iopt
)
1863 bool decl_p
= dv_is_decl_p (dv
);
1866 dv
= dv_from_decl (var_debug_decl (dv_as_decl (dv
)));
1868 for (node
= set
->regs
[REGNO (loc
)]; node
; node
= node
->next
)
1869 if (dv_as_opaque (node
->dv
) == dv_as_opaque (dv
)
1870 && node
->offset
== offset
)
1873 attrs_list_insert (&set
->regs
[REGNO (loc
)], dv
, offset
, loc
);
1874 set_variable_part (set
, loc
, dv
, offset
, initialized
, set_src
, iopt
);
1877 /* Return true if we should track a location that is OFFSET bytes from
1878 a variable. Store the constant offset in *OFFSET_OUT if so. */
1881 track_offset_p (poly_int64 offset
, HOST_WIDE_INT
*offset_out
)
1883 HOST_WIDE_INT const_offset
;
1884 if (!offset
.is_constant (&const_offset
)
1885 || !IN_RANGE (const_offset
, 0, MAX_VAR_PARTS
- 1))
1887 *offset_out
= const_offset
;
1891 /* Return the offset of a register that track_offset_p says we
1894 static HOST_WIDE_INT
1895 get_tracked_reg_offset (rtx loc
)
1897 HOST_WIDE_INT offset
;
1898 if (!track_offset_p (REG_OFFSET (loc
), &offset
))
1903 /* Set the register to contain REG_EXPR (LOC), REG_OFFSET (LOC). */
1906 var_reg_set (dataflow_set
*set
, rtx loc
, enum var_init_status initialized
,
1909 tree decl
= REG_EXPR (loc
);
1910 HOST_WIDE_INT offset
= get_tracked_reg_offset (loc
);
1912 var_reg_decl_set (set
, loc
, initialized
,
1913 dv_from_decl (decl
), offset
, set_src
, INSERT
);
1916 static enum var_init_status
1917 get_init_value (dataflow_set
*set
, rtx loc
, decl_or_value dv
)
1921 enum var_init_status ret_val
= VAR_INIT_STATUS_UNKNOWN
;
1923 if (! flag_var_tracking_uninit
)
1924 return VAR_INIT_STATUS_INITIALIZED
;
1926 var
= shared_hash_find (set
->vars
, dv
);
1929 for (i
= 0; i
< var
->n_var_parts
&& ret_val
== VAR_INIT_STATUS_UNKNOWN
; i
++)
1931 location_chain
*nextp
;
1932 for (nextp
= var
->var_part
[i
].loc_chain
; nextp
; nextp
= nextp
->next
)
1933 if (rtx_equal_p (nextp
->loc
, loc
))
1935 ret_val
= nextp
->init
;
1944 /* Delete current content of register LOC in dataflow set SET and set
1945 the register to contain REG_EXPR (LOC), REG_OFFSET (LOC). If
1946 MODIFY is true, any other live copies of the same variable part are
1947 also deleted from the dataflow set, otherwise the variable part is
1948 assumed to be copied from another location holding the same
1952 var_reg_delete_and_set (dataflow_set
*set
, rtx loc
, bool modify
,
1953 enum var_init_status initialized
, rtx set_src
)
1955 tree decl
= REG_EXPR (loc
);
1956 HOST_WIDE_INT offset
= get_tracked_reg_offset (loc
);
1960 decl
= var_debug_decl (decl
);
1962 if (initialized
== VAR_INIT_STATUS_UNKNOWN
)
1963 initialized
= get_init_value (set
, loc
, dv_from_decl (decl
));
1965 nextp
= &set
->regs
[REGNO (loc
)];
1966 for (node
= *nextp
; node
; node
= next
)
1969 if (dv_as_opaque (node
->dv
) != decl
|| node
->offset
!= offset
)
1971 delete_variable_part (set
, node
->loc
, node
->dv
, node
->offset
);
1978 nextp
= &node
->next
;
1982 clobber_variable_part (set
, loc
, dv_from_decl (decl
), offset
, set_src
);
1983 var_reg_set (set
, loc
, initialized
, set_src
);
1986 /* Delete the association of register LOC in dataflow set SET with any
1987 variables that aren't onepart. If CLOBBER is true, also delete any
1988 other live copies of the same variable part, and delete the
1989 association with onepart dvs too. */
1992 var_reg_delete (dataflow_set
*set
, rtx loc
, bool clobber
)
1994 attrs
**nextp
= &set
->regs
[REGNO (loc
)];
1997 HOST_WIDE_INT offset
;
1998 if (clobber
&& track_offset_p (REG_OFFSET (loc
), &offset
))
2000 tree decl
= REG_EXPR (loc
);
2002 decl
= var_debug_decl (decl
);
2004 clobber_variable_part (set
, NULL
, dv_from_decl (decl
), offset
, NULL
);
2007 for (node
= *nextp
; node
; node
= next
)
2010 if (clobber
|| !dv_onepart_p (node
->dv
))
2012 delete_variable_part (set
, node
->loc
, node
->dv
, node
->offset
);
2017 nextp
= &node
->next
;
2021 /* Delete content of register with number REGNO in dataflow set SET. */
2024 var_regno_delete (dataflow_set
*set
, int regno
)
2026 attrs
**reg
= &set
->regs
[regno
];
2029 for (node
= *reg
; node
; node
= next
)
2032 delete_variable_part (set
, node
->loc
, node
->dv
, node
->offset
);
2038 /* Return true if I is the negated value of a power of two. */
2040 negative_power_of_two_p (HOST_WIDE_INT i
)
2042 unsigned HOST_WIDE_INT x
= -(unsigned HOST_WIDE_INT
)i
;
2043 return pow2_or_zerop (x
);
2046 /* Strip constant offsets and alignments off of LOC. Return the base
2050 vt_get_canonicalize_base (rtx loc
)
2052 while ((GET_CODE (loc
) == PLUS
2053 || GET_CODE (loc
) == AND
)
2054 && GET_CODE (XEXP (loc
, 1)) == CONST_INT
2055 && (GET_CODE (loc
) != AND
2056 || negative_power_of_two_p (INTVAL (XEXP (loc
, 1)))))
2057 loc
= XEXP (loc
, 0);
2062 /* This caches canonicalized addresses for VALUEs, computed using
2063 information in the global cselib table. */
2064 static hash_map
<rtx
, rtx
> *global_get_addr_cache
;
2066 /* This caches canonicalized addresses for VALUEs, computed using
2067 information from the global cache and information pertaining to a
2068 basic block being analyzed. */
2069 static hash_map
<rtx
, rtx
> *local_get_addr_cache
;
2071 static rtx
vt_canonicalize_addr (dataflow_set
*, rtx
);
2073 /* Return the canonical address for LOC, that must be a VALUE, using a
2074 cached global equivalence or computing it and storing it in the
2078 get_addr_from_global_cache (rtx
const loc
)
2082 gcc_checking_assert (GET_CODE (loc
) == VALUE
);
2085 rtx
*slot
= &global_get_addr_cache
->get_or_insert (loc
, &existed
);
2089 x
= canon_rtx (get_addr (loc
));
2091 /* Tentative, avoiding infinite recursion. */
2096 rtx nx
= vt_canonicalize_addr (NULL
, x
);
2099 /* The table may have moved during recursion, recompute
2101 *global_get_addr_cache
->get (loc
) = x
= nx
;
2108 /* Return the canonical address for LOC, that must be a VALUE, using a
2109 cached local equivalence or computing it and storing it in the
2113 get_addr_from_local_cache (dataflow_set
*set
, rtx
const loc
)
2120 gcc_checking_assert (GET_CODE (loc
) == VALUE
);
2123 rtx
*slot
= &local_get_addr_cache
->get_or_insert (loc
, &existed
);
2127 x
= get_addr_from_global_cache (loc
);
2129 /* Tentative, avoiding infinite recursion. */
2132 /* Recurse to cache local expansion of X, or if we need to search
2133 for a VALUE in the expansion. */
2136 rtx nx
= vt_canonicalize_addr (set
, x
);
2139 slot
= local_get_addr_cache
->get (loc
);
2145 dv
= dv_from_rtx (x
);
2146 var
= shared_hash_find (set
->vars
, dv
);
2150 /* Look for an improved equivalent expression. */
2151 for (l
= var
->var_part
[0].loc_chain
; l
; l
= l
->next
)
2153 rtx base
= vt_get_canonicalize_base (l
->loc
);
2154 if (GET_CODE (base
) == VALUE
2155 && canon_value_cmp (base
, loc
))
2157 rtx nx
= vt_canonicalize_addr (set
, l
->loc
);
2160 slot
= local_get_addr_cache
->get (loc
);
2170 /* Canonicalize LOC using equivalences from SET in addition to those
2171 in the cselib static table. It expects a VALUE-based expression,
2172 and it will only substitute VALUEs with other VALUEs or
2173 function-global equivalences, so that, if two addresses have base
2174 VALUEs that are locally or globally related in ways that
2175 memrefs_conflict_p cares about, they will both canonicalize to
2176 expressions that have the same base VALUE.
2178 The use of VALUEs as canonical base addresses enables the canonical
2179 RTXs to remain unchanged globally, if they resolve to a constant,
2180 or throughout a basic block otherwise, so that they can be cached
2181 and the cache needs not be invalidated when REGs, MEMs or such
2185 vt_canonicalize_addr (dataflow_set
*set
, rtx oloc
)
2187 poly_int64 ofst
= 0, term
;
2188 machine_mode mode
= GET_MODE (oloc
);
2195 while (GET_CODE (loc
) == PLUS
2196 && poly_int_rtx_p (XEXP (loc
, 1), &term
))
2199 loc
= XEXP (loc
, 0);
2202 /* Alignment operations can't normally be combined, so just
2203 canonicalize the base and we're done. We'll normally have
2204 only one stack alignment anyway. */
2205 if (GET_CODE (loc
) == AND
2206 && GET_CODE (XEXP (loc
, 1)) == CONST_INT
2207 && negative_power_of_two_p (INTVAL (XEXP (loc
, 1))))
2209 x
= vt_canonicalize_addr (set
, XEXP (loc
, 0));
2210 if (x
!= XEXP (loc
, 0))
2211 loc
= gen_rtx_AND (mode
, x
, XEXP (loc
, 1));
2215 if (GET_CODE (loc
) == VALUE
)
2218 loc
= get_addr_from_local_cache (set
, loc
);
2220 loc
= get_addr_from_global_cache (loc
);
2222 /* Consolidate plus_constants. */
2223 while (maybe_ne (ofst
, 0)
2224 && GET_CODE (loc
) == PLUS
2225 && poly_int_rtx_p (XEXP (loc
, 1), &term
))
2228 loc
= XEXP (loc
, 0);
2235 x
= canon_rtx (loc
);
2242 /* Add OFST back in. */
2243 if (maybe_ne (ofst
, 0))
2245 /* Don't build new RTL if we can help it. */
2246 if (strip_offset (oloc
, &term
) == loc
&& known_eq (term
, ofst
))
2249 loc
= plus_constant (mode
, loc
, ofst
);
2255 /* Return true iff there's a true dependence between MLOC and LOC.
2256 MADDR must be a canonicalized version of MLOC's address. */
2259 vt_canon_true_dep (dataflow_set
*set
, rtx mloc
, rtx maddr
, rtx loc
)
2261 if (GET_CODE (loc
) != MEM
)
2264 rtx addr
= vt_canonicalize_addr (set
, XEXP (loc
, 0));
2265 if (!canon_true_dependence (mloc
, GET_MODE (mloc
), maddr
, loc
, addr
))
2271 /* Hold parameters for the hashtab traversal function
2272 drop_overlapping_mem_locs, see below. */
2274 struct overlapping_mems
2280 /* Remove all MEMs that overlap with COMS->LOC from the location list
2281 of a hash table entry for a onepart variable. COMS->ADDR must be a
2282 canonicalized form of COMS->LOC's address, and COMS->LOC must be
2283 canonicalized itself. */
2286 drop_overlapping_mem_locs (variable
**slot
, overlapping_mems
*coms
)
2288 dataflow_set
*set
= coms
->set
;
2289 rtx mloc
= coms
->loc
, addr
= coms
->addr
;
2290 variable
*var
= *slot
;
2292 if (var
->onepart
!= NOT_ONEPART
)
2294 location_chain
*loc
, **locp
;
2295 bool changed
= false;
2298 gcc_assert (var
->n_var_parts
== 1);
2300 if (shared_var_p (var
, set
->vars
))
2302 for (loc
= var
->var_part
[0].loc_chain
; loc
; loc
= loc
->next
)
2303 if (vt_canon_true_dep (set
, mloc
, addr
, loc
->loc
))
2309 slot
= unshare_variable (set
, slot
, var
, VAR_INIT_STATUS_UNKNOWN
);
2311 gcc_assert (var
->n_var_parts
== 1);
2314 if (VAR_LOC_1PAUX (var
))
2315 cur_loc
= VAR_LOC_FROM (var
);
2317 cur_loc
= var
->var_part
[0].cur_loc
;
2319 for (locp
= &var
->var_part
[0].loc_chain
, loc
= *locp
;
2322 if (!vt_canon_true_dep (set
, mloc
, addr
, loc
->loc
))
2329 /* If we have deleted the location which was last emitted
2330 we have to emit new location so add the variable to set
2331 of changed variables. */
2332 if (cur_loc
== loc
->loc
)
2335 var
->var_part
[0].cur_loc
= NULL
;
2336 if (VAR_LOC_1PAUX (var
))
2337 VAR_LOC_FROM (var
) = NULL
;
2342 if (!var
->var_part
[0].loc_chain
)
2348 variable_was_changed (var
, set
);
2354 /* Remove from SET all VALUE bindings to MEMs that overlap with LOC. */
2357 clobber_overlapping_mems (dataflow_set
*set
, rtx loc
)
2359 struct overlapping_mems coms
;
2361 gcc_checking_assert (GET_CODE (loc
) == MEM
);
2364 coms
.loc
= canon_rtx (loc
);
2365 coms
.addr
= vt_canonicalize_addr (set
, XEXP (loc
, 0));
2367 set
->traversed_vars
= set
->vars
;
2368 shared_hash_htab (set
->vars
)
2369 ->traverse
<overlapping_mems
*, drop_overlapping_mem_locs
> (&coms
);
2370 set
->traversed_vars
= NULL
;
2373 /* Set the location of DV, OFFSET as the MEM LOC. */
2376 var_mem_decl_set (dataflow_set
*set
, rtx loc
, enum var_init_status initialized
,
2377 decl_or_value dv
, HOST_WIDE_INT offset
, rtx set_src
,
2378 enum insert_option iopt
)
2380 if (dv_is_decl_p (dv
))
2381 dv
= dv_from_decl (var_debug_decl (dv_as_decl (dv
)));
2383 set_variable_part (set
, loc
, dv
, offset
, initialized
, set_src
, iopt
);
2386 /* Set the location part of variable MEM_EXPR (LOC) in dataflow set
2388 Adjust the address first if it is stack pointer based. */
2391 var_mem_set (dataflow_set
*set
, rtx loc
, enum var_init_status initialized
,
2394 tree decl
= MEM_EXPR (loc
);
2395 HOST_WIDE_INT offset
= int_mem_offset (loc
);
2397 var_mem_decl_set (set
, loc
, initialized
,
2398 dv_from_decl (decl
), offset
, set_src
, INSERT
);
2401 /* Delete and set the location part of variable MEM_EXPR (LOC) in
2402 dataflow set SET to LOC. If MODIFY is true, any other live copies
2403 of the same variable part are also deleted from the dataflow set,
2404 otherwise the variable part is assumed to be copied from another
2405 location holding the same part.
2406 Adjust the address first if it is stack pointer based. */
2409 var_mem_delete_and_set (dataflow_set
*set
, rtx loc
, bool modify
,
2410 enum var_init_status initialized
, rtx set_src
)
2412 tree decl
= MEM_EXPR (loc
);
2413 HOST_WIDE_INT offset
= int_mem_offset (loc
);
2415 clobber_overlapping_mems (set
, loc
);
2416 decl
= var_debug_decl (decl
);
2418 if (initialized
== VAR_INIT_STATUS_UNKNOWN
)
2419 initialized
= get_init_value (set
, loc
, dv_from_decl (decl
));
2422 clobber_variable_part (set
, NULL
, dv_from_decl (decl
), offset
, set_src
);
2423 var_mem_set (set
, loc
, initialized
, set_src
);
2426 /* Delete the location part LOC from dataflow set SET. If CLOBBER is
2427 true, also delete any other live copies of the same variable part.
2428 Adjust the address first if it is stack pointer based. */
2431 var_mem_delete (dataflow_set
*set
, rtx loc
, bool clobber
)
2433 tree decl
= MEM_EXPR (loc
);
2434 HOST_WIDE_INT offset
= int_mem_offset (loc
);
2436 clobber_overlapping_mems (set
, loc
);
2437 decl
= var_debug_decl (decl
);
2439 clobber_variable_part (set
, NULL
, dv_from_decl (decl
), offset
, NULL
);
2440 delete_variable_part (set
, loc
, dv_from_decl (decl
), offset
);
2443 /* Return true if LOC should not be expanded for location expressions,
2447 unsuitable_loc (rtx loc
)
2449 switch (GET_CODE (loc
))
2463 /* Bind VAL to LOC in SET. If MODIFIED, detach LOC from any values
2467 val_bind (dataflow_set
*set
, rtx val
, rtx loc
, bool modified
)
2472 var_regno_delete (set
, REGNO (loc
));
2473 var_reg_decl_set (set
, loc
, VAR_INIT_STATUS_INITIALIZED
,
2474 dv_from_value (val
), 0, NULL_RTX
, INSERT
);
2476 else if (MEM_P (loc
))
2478 struct elt_loc_list
*l
= CSELIB_VAL_PTR (val
)->locs
;
2481 clobber_overlapping_mems (set
, loc
);
2483 if (l
&& GET_CODE (l
->loc
) == VALUE
)
2484 l
= canonical_cselib_val (CSELIB_VAL_PTR (l
->loc
))->locs
;
2486 /* If this MEM is a global constant, we don't need it in the
2487 dynamic tables. ??? We should test this before emitting the
2488 micro-op in the first place. */
2490 if (GET_CODE (l
->loc
) == MEM
&& XEXP (l
->loc
, 0) == XEXP (loc
, 0))
2496 var_mem_decl_set (set
, loc
, VAR_INIT_STATUS_INITIALIZED
,
2497 dv_from_value (val
), 0, NULL_RTX
, INSERT
);
2501 /* Other kinds of equivalences are necessarily static, at least
2502 so long as we do not perform substitutions while merging
2505 set_variable_part (set
, loc
, dv_from_value (val
), 0,
2506 VAR_INIT_STATUS_INITIALIZED
, NULL_RTX
, INSERT
);
2510 /* Bind a value to a location it was just stored in. If MODIFIED
2511 holds, assume the location was modified, detaching it from any
2512 values bound to it. */
2515 val_store (dataflow_set
*set
, rtx val
, rtx loc
, rtx_insn
*insn
,
2518 cselib_val
*v
= CSELIB_VAL_PTR (val
);
2520 gcc_assert (cselib_preserved_value_p (v
));
2524 fprintf (dump_file
, "%i: ", insn
? INSN_UID (insn
) : 0);
2525 print_inline_rtx (dump_file
, loc
, 0);
2526 fprintf (dump_file
, " evaluates to ");
2527 print_inline_rtx (dump_file
, val
, 0);
2530 struct elt_loc_list
*l
;
2531 for (l
= v
->locs
; l
; l
= l
->next
)
2533 fprintf (dump_file
, "\n%i: ", INSN_UID (l
->setting_insn
));
2534 print_inline_rtx (dump_file
, l
->loc
, 0);
2537 fprintf (dump_file
, "\n");
2540 gcc_checking_assert (!unsuitable_loc (loc
));
2542 val_bind (set
, val
, loc
, modified
);
2545 /* Clear (canonical address) slots that reference X. */
2548 local_get_addr_clear_given_value (rtx
const &, rtx
*slot
, rtx x
)
2550 if (vt_get_canonicalize_base (*slot
) == x
)
2555 /* Reset this node, detaching all its equivalences. Return the slot
2556 in the variable hash table that holds dv, if there is one. */
2559 val_reset (dataflow_set
*set
, decl_or_value dv
)
2561 variable
*var
= shared_hash_find (set
->vars
, dv
) ;
2562 location_chain
*node
;
2565 if (!var
|| !var
->n_var_parts
)
2568 gcc_assert (var
->n_var_parts
== 1);
2570 if (var
->onepart
== ONEPART_VALUE
)
2572 rtx x
= dv_as_value (dv
);
2574 /* Relationships in the global cache don't change, so reset the
2575 local cache entry only. */
2576 rtx
*slot
= local_get_addr_cache
->get (x
);
2579 /* If the value resolved back to itself, odds are that other
2580 values may have cached it too. These entries now refer
2581 to the old X, so detach them too. Entries that used the
2582 old X but resolved to something else remain ok as long as
2583 that something else isn't also reset. */
2585 local_get_addr_cache
2586 ->traverse
<rtx
, local_get_addr_clear_given_value
> (x
);
2592 for (node
= var
->var_part
[0].loc_chain
; node
; node
= node
->next
)
2593 if (GET_CODE (node
->loc
) == VALUE
2594 && canon_value_cmp (node
->loc
, cval
))
2597 for (node
= var
->var_part
[0].loc_chain
; node
; node
= node
->next
)
2598 if (GET_CODE (node
->loc
) == VALUE
&& cval
!= node
->loc
)
2600 /* Redirect the equivalence link to the new canonical
2601 value, or simply remove it if it would point at
2604 set_variable_part (set
, cval
, dv_from_value (node
->loc
),
2605 0, node
->init
, node
->set_src
, NO_INSERT
);
2606 delete_variable_part (set
, dv_as_value (dv
),
2607 dv_from_value (node
->loc
), 0);
2612 decl_or_value cdv
= dv_from_value (cval
);
2614 /* Keep the remaining values connected, accumulating links
2615 in the canonical value. */
2616 for (node
= var
->var_part
[0].loc_chain
; node
; node
= node
->next
)
2618 if (node
->loc
== cval
)
2620 else if (GET_CODE (node
->loc
) == REG
)
2621 var_reg_decl_set (set
, node
->loc
, node
->init
, cdv
, 0,
2622 node
->set_src
, NO_INSERT
);
2623 else if (GET_CODE (node
->loc
) == MEM
)
2624 var_mem_decl_set (set
, node
->loc
, node
->init
, cdv
, 0,
2625 node
->set_src
, NO_INSERT
);
2627 set_variable_part (set
, node
->loc
, cdv
, 0,
2628 node
->init
, node
->set_src
, NO_INSERT
);
2632 /* We remove this last, to make sure that the canonical value is not
2633 removed to the point of requiring reinsertion. */
2635 delete_variable_part (set
, dv_as_value (dv
), dv_from_value (cval
), 0);
2637 clobber_variable_part (set
, NULL
, dv
, 0, NULL
);
2640 /* Find the values in a given location and map the val to another
2641 value, if it is unique, or add the location as one holding the
2645 val_resolve (dataflow_set
*set
, rtx val
, rtx loc
, rtx_insn
*insn
)
2647 decl_or_value dv
= dv_from_value (val
);
2649 if (dump_file
&& (dump_flags
& TDF_DETAILS
))
2652 fprintf (dump_file
, "%i: ", INSN_UID (insn
));
2654 fprintf (dump_file
, "head: ");
2655 print_inline_rtx (dump_file
, val
, 0);
2656 fputs (" is at ", dump_file
);
2657 print_inline_rtx (dump_file
, loc
, 0);
2658 fputc ('\n', dump_file
);
2661 val_reset (set
, dv
);
2663 gcc_checking_assert (!unsuitable_loc (loc
));
2667 attrs
*node
, *found
= NULL
;
2669 for (node
= set
->regs
[REGNO (loc
)]; node
; node
= node
->next
)
2670 if (dv_is_value_p (node
->dv
)
2671 && GET_MODE (dv_as_value (node
->dv
)) == GET_MODE (loc
))
2675 /* Map incoming equivalences. ??? Wouldn't it be nice if
2676 we just started sharing the location lists? Maybe a
2677 circular list ending at the value itself or some
2679 set_variable_part (set
, dv_as_value (node
->dv
),
2680 dv_from_value (val
), node
->offset
,
2681 VAR_INIT_STATUS_INITIALIZED
, NULL_RTX
, INSERT
);
2682 set_variable_part (set
, val
, node
->dv
, node
->offset
,
2683 VAR_INIT_STATUS_INITIALIZED
, NULL_RTX
, INSERT
);
2686 /* If we didn't find any equivalence, we need to remember that
2687 this value is held in the named register. */
2691 /* ??? Attempt to find and merge equivalent MEMs or other
2694 val_bind (set
, val
, loc
, false);
2697 /* Initialize dataflow set SET to be empty.
2698 VARS_SIZE is the initial size of hash table VARS. */
2701 dataflow_set_init (dataflow_set
*set
)
2703 init_attrs_list_set (set
->regs
);
2704 set
->vars
= shared_hash_copy (empty_shared_hash
);
2705 set
->stack_adjust
= 0;
2706 set
->traversed_vars
= NULL
;
2709 /* Delete the contents of dataflow set SET. */
2712 dataflow_set_clear (dataflow_set
*set
)
2716 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
2717 attrs_list_clear (&set
->regs
[i
]);
2719 shared_hash_destroy (set
->vars
);
2720 set
->vars
= shared_hash_copy (empty_shared_hash
);
2723 /* Copy the contents of dataflow set SRC to DST. */
2726 dataflow_set_copy (dataflow_set
*dst
, dataflow_set
*src
)
2730 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
2731 attrs_list_copy (&dst
->regs
[i
], src
->regs
[i
]);
2733 shared_hash_destroy (dst
->vars
);
2734 dst
->vars
= shared_hash_copy (src
->vars
);
2735 dst
->stack_adjust
= src
->stack_adjust
;
2738 /* Information for merging lists of locations for a given offset of variable.
2740 struct variable_union_info
2742 /* Node of the location chain. */
2745 /* The sum of positions in the input chains. */
2748 /* The position in the chain of DST dataflow set. */
2752 /* Buffer for location list sorting and its allocated size. */
2753 static struct variable_union_info
*vui_vec
;
2754 static int vui_allocated
;
2756 /* Compare function for qsort, order the structures by POS element. */
2759 variable_union_info_cmp_pos (const void *n1
, const void *n2
)
2761 const struct variable_union_info
*const i1
=
2762 (const struct variable_union_info
*) n1
;
2763 const struct variable_union_info
*const i2
=
2764 ( const struct variable_union_info
*) n2
;
2766 if (i1
->pos
!= i2
->pos
)
2767 return i1
->pos
- i2
->pos
;
2769 return (i1
->pos_dst
- i2
->pos_dst
);
2772 /* Compute union of location parts of variable *SLOT and the same variable
2773 from hash table DATA. Compute "sorted" union of the location chains
2774 for common offsets, i.e. the locations of a variable part are sorted by
2775 a priority where the priority is the sum of the positions in the 2 chains
2776 (if a location is only in one list the position in the second list is
2777 defined to be larger than the length of the chains).
2778 When we are updating the location parts the newest location is in the
2779 beginning of the chain, so when we do the described "sorted" union
2780 we keep the newest locations in the beginning. */
2783 variable_union (variable
*src
, dataflow_set
*set
)
2789 dstp
= shared_hash_find_slot (set
->vars
, src
->dv
);
2790 if (!dstp
|| !*dstp
)
2794 dst_can_be_shared
= false;
2796 dstp
= shared_hash_find_slot_unshare (&set
->vars
, src
->dv
, INSERT
);
2800 /* Continue traversing the hash table. */
2806 gcc_assert (src
->n_var_parts
);
2807 gcc_checking_assert (src
->onepart
== dst
->onepart
);
2809 /* We can combine one-part variables very efficiently, because their
2810 entries are in canonical order. */
2813 location_chain
**nodep
, *dnode
, *snode
;
2815 gcc_assert (src
->n_var_parts
== 1
2816 && dst
->n_var_parts
== 1);
2818 snode
= src
->var_part
[0].loc_chain
;
2821 restart_onepart_unshared
:
2822 nodep
= &dst
->var_part
[0].loc_chain
;
2828 int r
= dnode
? loc_cmp (dnode
->loc
, snode
->loc
) : 1;
2832 location_chain
*nnode
;
2834 if (shared_var_p (dst
, set
->vars
))
2836 dstp
= unshare_variable (set
, dstp
, dst
,
2837 VAR_INIT_STATUS_INITIALIZED
);
2839 goto restart_onepart_unshared
;
2842 *nodep
= nnode
= new location_chain
;
2843 nnode
->loc
= snode
->loc
;
2844 nnode
->init
= snode
->init
;
2845 if (!snode
->set_src
|| MEM_P (snode
->set_src
))
2846 nnode
->set_src
= NULL
;
2848 nnode
->set_src
= snode
->set_src
;
2849 nnode
->next
= dnode
;
2853 gcc_checking_assert (rtx_equal_p (dnode
->loc
, snode
->loc
));
2856 snode
= snode
->next
;
2858 nodep
= &dnode
->next
;
2865 gcc_checking_assert (!src
->onepart
);
2867 /* Count the number of location parts, result is K. */
2868 for (i
= 0, j
= 0, k
= 0;
2869 i
< src
->n_var_parts
&& j
< dst
->n_var_parts
; k
++)
2871 if (VAR_PART_OFFSET (src
, i
) == VAR_PART_OFFSET (dst
, j
))
2876 else if (VAR_PART_OFFSET (src
, i
) < VAR_PART_OFFSET (dst
, j
))
2881 k
+= src
->n_var_parts
- i
;
2882 k
+= dst
->n_var_parts
- j
;
2884 /* We track only variables whose size is <= MAX_VAR_PARTS bytes
2885 thus there are at most MAX_VAR_PARTS different offsets. */
2886 gcc_checking_assert (dst
->onepart
? k
== 1 : k
<= MAX_VAR_PARTS
);
2888 if (dst
->n_var_parts
!= k
&& shared_var_p (dst
, set
->vars
))
2890 dstp
= unshare_variable (set
, dstp
, dst
, VAR_INIT_STATUS_UNKNOWN
);
2894 i
= src
->n_var_parts
- 1;
2895 j
= dst
->n_var_parts
- 1;
2896 dst
->n_var_parts
= k
;
2898 for (k
--; k
>= 0; k
--)
2900 location_chain
*node
, *node2
;
2902 if (i
>= 0 && j
>= 0
2903 && VAR_PART_OFFSET (src
, i
) == VAR_PART_OFFSET (dst
, j
))
2905 /* Compute the "sorted" union of the chains, i.e. the locations which
2906 are in both chains go first, they are sorted by the sum of
2907 positions in the chains. */
2910 struct variable_union_info
*vui
;
2912 /* If DST is shared compare the location chains.
2913 If they are different we will modify the chain in DST with
2914 high probability so make a copy of DST. */
2915 if (shared_var_p (dst
, set
->vars
))
2917 for (node
= src
->var_part
[i
].loc_chain
,
2918 node2
= dst
->var_part
[j
].loc_chain
; node
&& node2
;
2919 node
= node
->next
, node2
= node2
->next
)
2921 if (!((REG_P (node2
->loc
)
2922 && REG_P (node
->loc
)
2923 && REGNO (node2
->loc
) == REGNO (node
->loc
))
2924 || rtx_equal_p (node2
->loc
, node
->loc
)))
2926 if (node2
->init
< node
->init
)
2927 node2
->init
= node
->init
;
2933 dstp
= unshare_variable (set
, dstp
, dst
,
2934 VAR_INIT_STATUS_UNKNOWN
);
2935 dst
= (variable
*)*dstp
;
2940 for (node
= src
->var_part
[i
].loc_chain
; node
; node
= node
->next
)
2943 for (node
= dst
->var_part
[j
].loc_chain
; node
; node
= node
->next
)
2948 /* The most common case, much simpler, no qsort is needed. */
2949 location_chain
*dstnode
= dst
->var_part
[j
].loc_chain
;
2950 dst
->var_part
[k
].loc_chain
= dstnode
;
2951 VAR_PART_OFFSET (dst
, k
) = VAR_PART_OFFSET (dst
, j
);
2953 for (node
= src
->var_part
[i
].loc_chain
; node
; node
= node
->next
)
2954 if (!((REG_P (dstnode
->loc
)
2955 && REG_P (node
->loc
)
2956 && REGNO (dstnode
->loc
) == REGNO (node
->loc
))
2957 || rtx_equal_p (dstnode
->loc
, node
->loc
)))
2959 location_chain
*new_node
;
2961 /* Copy the location from SRC. */
2962 new_node
= new location_chain
;
2963 new_node
->loc
= node
->loc
;
2964 new_node
->init
= node
->init
;
2965 if (!node
->set_src
|| MEM_P (node
->set_src
))
2966 new_node
->set_src
= NULL
;
2968 new_node
->set_src
= node
->set_src
;
2969 node2
->next
= new_node
;
2976 if (src_l
+ dst_l
> vui_allocated
)
2978 vui_allocated
= MAX (vui_allocated
* 2, src_l
+ dst_l
);
2979 vui_vec
= XRESIZEVEC (struct variable_union_info
, vui_vec
,
2984 /* Fill in the locations from DST. */
2985 for (node
= dst
->var_part
[j
].loc_chain
, jj
= 0; node
;
2986 node
= node
->next
, jj
++)
2989 vui
[jj
].pos_dst
= jj
;
2991 /* Pos plus value larger than a sum of 2 valid positions. */
2992 vui
[jj
].pos
= jj
+ src_l
+ dst_l
;
2995 /* Fill in the locations from SRC. */
2997 for (node
= src
->var_part
[i
].loc_chain
, ii
= 0; node
;
2998 node
= node
->next
, ii
++)
3000 /* Find location from NODE. */
3001 for (jj
= 0; jj
< dst_l
; jj
++)
3003 if ((REG_P (vui
[jj
].lc
->loc
)
3004 && REG_P (node
->loc
)
3005 && REGNO (vui
[jj
].lc
->loc
) == REGNO (node
->loc
))
3006 || rtx_equal_p (vui
[jj
].lc
->loc
, node
->loc
))
3008 vui
[jj
].pos
= jj
+ ii
;
3012 if (jj
>= dst_l
) /* The location has not been found. */
3014 location_chain
*new_node
;
3016 /* Copy the location from SRC. */
3017 new_node
= new location_chain
;
3018 new_node
->loc
= node
->loc
;
3019 new_node
->init
= node
->init
;
3020 if (!node
->set_src
|| MEM_P (node
->set_src
))
3021 new_node
->set_src
= NULL
;
3023 new_node
->set_src
= node
->set_src
;
3024 vui
[n
].lc
= new_node
;
3025 vui
[n
].pos_dst
= src_l
+ dst_l
;
3026 vui
[n
].pos
= ii
+ src_l
+ dst_l
;
3033 /* Special case still very common case. For dst_l == 2
3034 all entries dst_l ... n-1 are sorted, with for i >= dst_l
3035 vui[i].pos == i + src_l + dst_l. */
3036 if (vui
[0].pos
> vui
[1].pos
)
3038 /* Order should be 1, 0, 2... */
3039 dst
->var_part
[k
].loc_chain
= vui
[1].lc
;
3040 vui
[1].lc
->next
= vui
[0].lc
;
3043 vui
[0].lc
->next
= vui
[2].lc
;
3044 vui
[n
- 1].lc
->next
= NULL
;
3047 vui
[0].lc
->next
= NULL
;
3052 dst
->var_part
[k
].loc_chain
= vui
[0].lc
;
3053 if (n
>= 3 && vui
[2].pos
< vui
[1].pos
)
3055 /* Order should be 0, 2, 1, 3... */
3056 vui
[0].lc
->next
= vui
[2].lc
;
3057 vui
[2].lc
->next
= vui
[1].lc
;
3060 vui
[1].lc
->next
= vui
[3].lc
;
3061 vui
[n
- 1].lc
->next
= NULL
;
3064 vui
[1].lc
->next
= NULL
;
3069 /* Order should be 0, 1, 2... */
3071 vui
[n
- 1].lc
->next
= NULL
;
3074 for (; ii
< n
; ii
++)
3075 vui
[ii
- 1].lc
->next
= vui
[ii
].lc
;
3079 qsort (vui
, n
, sizeof (struct variable_union_info
),
3080 variable_union_info_cmp_pos
);
3082 /* Reconnect the nodes in sorted order. */
3083 for (ii
= 1; ii
< n
; ii
++)
3084 vui
[ii
- 1].lc
->next
= vui
[ii
].lc
;
3085 vui
[n
- 1].lc
->next
= NULL
;
3086 dst
->var_part
[k
].loc_chain
= vui
[0].lc
;
3089 VAR_PART_OFFSET (dst
, k
) = VAR_PART_OFFSET (dst
, j
);
3094 else if ((i
>= 0 && j
>= 0
3095 && VAR_PART_OFFSET (src
, i
) < VAR_PART_OFFSET (dst
, j
))
3098 dst
->var_part
[k
] = dst
->var_part
[j
];
3101 else if ((i
>= 0 && j
>= 0
3102 && VAR_PART_OFFSET (src
, i
) > VAR_PART_OFFSET (dst
, j
))
3105 location_chain
**nextp
;
3107 /* Copy the chain from SRC. */
3108 nextp
= &dst
->var_part
[k
].loc_chain
;
3109 for (node
= src
->var_part
[i
].loc_chain
; node
; node
= node
->next
)
3111 location_chain
*new_lc
;
3113 new_lc
= new location_chain
;
3114 new_lc
->next
= NULL
;
3115 new_lc
->init
= node
->init
;
3116 if (!node
->set_src
|| MEM_P (node
->set_src
))
3117 new_lc
->set_src
= NULL
;
3119 new_lc
->set_src
= node
->set_src
;
3120 new_lc
->loc
= node
->loc
;
3123 nextp
= &new_lc
->next
;
3126 VAR_PART_OFFSET (dst
, k
) = VAR_PART_OFFSET (src
, i
);
3129 dst
->var_part
[k
].cur_loc
= NULL
;
3132 if (flag_var_tracking_uninit
)
3133 for (i
= 0; i
< src
->n_var_parts
&& i
< dst
->n_var_parts
; i
++)
3135 location_chain
*node
, *node2
;
3136 for (node
= src
->var_part
[i
].loc_chain
; node
; node
= node
->next
)
3137 for (node2
= dst
->var_part
[i
].loc_chain
; node2
; node2
= node2
->next
)
3138 if (rtx_equal_p (node
->loc
, node2
->loc
))
3140 if (node
->init
> node2
->init
)
3141 node2
->init
= node
->init
;
3145 /* Continue traversing the hash table. */
3149 /* Compute union of dataflow sets SRC and DST and store it to DST. */
3152 dataflow_set_union (dataflow_set
*dst
, dataflow_set
*src
)
3156 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
3157 attrs_list_union (&dst
->regs
[i
], src
->regs
[i
]);
3159 if (dst
->vars
== empty_shared_hash
)
3161 shared_hash_destroy (dst
->vars
);
3162 dst
->vars
= shared_hash_copy (src
->vars
);
3166 variable_iterator_type hi
;
3169 FOR_EACH_HASH_TABLE_ELEMENT (*shared_hash_htab (src
->vars
),
3171 variable_union (var
, dst
);
3175 /* Whether the value is currently being expanded. */
3176 #define VALUE_RECURSED_INTO(x) \
3177 (RTL_FLAG_CHECK2 ("VALUE_RECURSED_INTO", (x), VALUE, DEBUG_EXPR)->used)
3179 /* Whether no expansion was found, saving useless lookups.
3180 It must only be set when VALUE_CHANGED is clear. */
3181 #define NO_LOC_P(x) \
3182 (RTL_FLAG_CHECK2 ("NO_LOC_P", (x), VALUE, DEBUG_EXPR)->return_val)
3184 /* Whether cur_loc in the value needs to be (re)computed. */
3185 #define VALUE_CHANGED(x) \
3186 (RTL_FLAG_CHECK1 ("VALUE_CHANGED", (x), VALUE)->frame_related)
3187 /* Whether cur_loc in the decl needs to be (re)computed. */
3188 #define DECL_CHANGED(x) TREE_VISITED (x)
3190 /* Record (if NEWV) that DV needs to have its cur_loc recomputed. For
3191 user DECLs, this means they're in changed_variables. Values and
3192 debug exprs may be left with this flag set if no user variable
3193 requires them to be evaluated. */
3196 set_dv_changed (decl_or_value dv
, bool newv
)
3198 switch (dv_onepart_p (dv
))
3202 NO_LOC_P (dv_as_value (dv
)) = false;
3203 VALUE_CHANGED (dv_as_value (dv
)) = newv
;
3208 NO_LOC_P (DECL_RTL_KNOWN_SET (dv_as_decl (dv
))) = false;
3212 DECL_CHANGED (dv_as_decl (dv
)) = newv
;
3217 /* Return true if DV needs to have its cur_loc recomputed. */
3220 dv_changed_p (decl_or_value dv
)
3222 return (dv_is_value_p (dv
)
3223 ? VALUE_CHANGED (dv_as_value (dv
))
3224 : DECL_CHANGED (dv_as_decl (dv
)));
3227 /* Return a location list node whose loc is rtx_equal to LOC, in the
3228 location list of a one-part variable or value VAR, or in that of
3229 any values recursively mentioned in the location lists. VARS must
3230 be in star-canonical form. */
3232 static location_chain
*
3233 find_loc_in_1pdv (rtx loc
, variable
*var
, variable_table_type
*vars
)
3235 location_chain
*node
;
3236 enum rtx_code loc_code
;
3241 gcc_checking_assert (var
->onepart
);
3243 if (!var
->n_var_parts
)
3246 gcc_checking_assert (loc
!= dv_as_opaque (var
->dv
));
3248 loc_code
= GET_CODE (loc
);
3249 for (node
= var
->var_part
[0].loc_chain
; node
; node
= node
->next
)
3254 if (GET_CODE (node
->loc
) != loc_code
)
3256 if (GET_CODE (node
->loc
) != VALUE
)
3259 else if (loc
== node
->loc
)
3261 else if (loc_code
!= VALUE
)
3263 if (rtx_equal_p (loc
, node
->loc
))
3268 /* Since we're in star-canonical form, we don't need to visit
3269 non-canonical nodes: one-part variables and non-canonical
3270 values would only point back to the canonical node. */
3271 if (dv_is_value_p (var
->dv
)
3272 && !canon_value_cmp (node
->loc
, dv_as_value (var
->dv
)))
3274 /* Skip all subsequent VALUEs. */
3275 while (node
->next
&& GET_CODE (node
->next
->loc
) == VALUE
)
3278 gcc_checking_assert (!canon_value_cmp (node
->loc
,
3279 dv_as_value (var
->dv
)));
3280 if (loc
== node
->loc
)
3286 gcc_checking_assert (node
== var
->var_part
[0].loc_chain
);
3287 gcc_checking_assert (!node
->next
);
3289 dv
= dv_from_value (node
->loc
);
3290 rvar
= vars
->find_with_hash (dv
, dv_htab_hash (dv
));
3291 return find_loc_in_1pdv (loc
, rvar
, vars
);
3294 /* ??? Gotta look in cselib_val locations too. */
3299 /* Hash table iteration argument passed to variable_merge. */
3302 /* The set in which the merge is to be inserted. */
3304 /* The set that we're iterating in. */
3306 /* The set that may contain the other dv we are to merge with. */
3308 /* Number of onepart dvs in src. */
3309 int src_onepart_cnt
;
3312 /* Insert LOC in *DNODE, if it's not there yet. The list must be in
3313 loc_cmp order, and it is maintained as such. */
3316 insert_into_intersection (location_chain
**nodep
, rtx loc
,
3317 enum var_init_status status
)
3319 location_chain
*node
;
3322 for (node
= *nodep
; node
; nodep
= &node
->next
, node
= *nodep
)
3323 if ((r
= loc_cmp (node
->loc
, loc
)) == 0)
3325 node
->init
= MIN (node
->init
, status
);
3331 node
= new location_chain
;
3334 node
->set_src
= NULL
;
3335 node
->init
= status
;
3336 node
->next
= *nodep
;
3340 /* Insert in DEST the intersection of the locations present in both
3341 S1NODE and S2VAR, directly or indirectly. S1NODE is from a
3342 variable in DSM->cur, whereas S2VAR is from DSM->src. dvar is in
3346 intersect_loc_chains (rtx val
, location_chain
**dest
, struct dfset_merge
*dsm
,
3347 location_chain
*s1node
, variable
*s2var
)
3349 dataflow_set
*s1set
= dsm
->cur
;
3350 dataflow_set
*s2set
= dsm
->src
;
3351 location_chain
*found
;
3355 location_chain
*s2node
;
3357 gcc_checking_assert (s2var
->onepart
);
3359 if (s2var
->n_var_parts
)
3361 s2node
= s2var
->var_part
[0].loc_chain
;
3363 for (; s1node
&& s2node
;
3364 s1node
= s1node
->next
, s2node
= s2node
->next
)
3365 if (s1node
->loc
!= s2node
->loc
)
3367 else if (s1node
->loc
== val
)
3370 insert_into_intersection (dest
, s1node
->loc
,
3371 MIN (s1node
->init
, s2node
->init
));
3375 for (; s1node
; s1node
= s1node
->next
)
3377 if (s1node
->loc
== val
)
3380 if ((found
= find_loc_in_1pdv (s1node
->loc
, s2var
,
3381 shared_hash_htab (s2set
->vars
))))
3383 insert_into_intersection (dest
, s1node
->loc
,
3384 MIN (s1node
->init
, found
->init
));
3388 if (GET_CODE (s1node
->loc
) == VALUE
3389 && !VALUE_RECURSED_INTO (s1node
->loc
))
3391 decl_or_value dv
= dv_from_value (s1node
->loc
);
3392 variable
*svar
= shared_hash_find (s1set
->vars
, dv
);
3395 if (svar
->n_var_parts
== 1)
3397 VALUE_RECURSED_INTO (s1node
->loc
) = true;
3398 intersect_loc_chains (val
, dest
, dsm
,
3399 svar
->var_part
[0].loc_chain
,
3401 VALUE_RECURSED_INTO (s1node
->loc
) = false;
3406 /* ??? gotta look in cselib_val locations too. */
3408 /* ??? if the location is equivalent to any location in src,
3409 searched recursively
3411 add to dst the values needed to represent the equivalence
3413 telling whether locations S is equivalent to another dv's
3416 for each location D in the list
3418 if S and D satisfy rtx_equal_p, then it is present
3420 else if D is a value, recurse without cycles
3422 else if S and D have the same CODE and MODE
3424 for each operand oS and the corresponding oD
3426 if oS and oD are not equivalent, then S an D are not equivalent
3428 else if they are RTX vectors
3430 if any vector oS element is not equivalent to its respective oD,
3431 then S and D are not equivalent
3439 /* Return -1 if X should be before Y in a location list for a 1-part
3440 variable, 1 if Y should be before X, and 0 if they're equivalent
3441 and should not appear in the list. */
3444 loc_cmp (rtx x
, rtx y
)
3447 RTX_CODE code
= GET_CODE (x
);
3457 gcc_assert (GET_MODE (x
) == GET_MODE (y
));
3458 if (REGNO (x
) == REGNO (y
))
3460 else if (REGNO (x
) < REGNO (y
))
3473 gcc_assert (GET_MODE (x
) == GET_MODE (y
));
3474 return loc_cmp (XEXP (x
, 0), XEXP (y
, 0));
3480 if (GET_CODE (x
) == VALUE
)
3482 if (GET_CODE (y
) != VALUE
)
3484 /* Don't assert the modes are the same, that is true only
3485 when not recursing. (subreg:QI (value:SI 1:1) 0)
3486 and (subreg:QI (value:DI 2:2) 0) can be compared,
3487 even when the modes are different. */
3488 if (canon_value_cmp (x
, y
))
3494 if (GET_CODE (y
) == VALUE
)
3497 /* Entry value is the least preferable kind of expression. */
3498 if (GET_CODE (x
) == ENTRY_VALUE
)
3500 if (GET_CODE (y
) != ENTRY_VALUE
)
3502 gcc_assert (GET_MODE (x
) == GET_MODE (y
));
3503 return loc_cmp (ENTRY_VALUE_EXP (x
), ENTRY_VALUE_EXP (y
));
3506 if (GET_CODE (y
) == ENTRY_VALUE
)
3509 if (GET_CODE (x
) == GET_CODE (y
))
3510 /* Compare operands below. */;
3511 else if (GET_CODE (x
) < GET_CODE (y
))
3516 gcc_assert (GET_MODE (x
) == GET_MODE (y
));
3518 if (GET_CODE (x
) == DEBUG_EXPR
)
3520 if (DEBUG_TEMP_UID (DEBUG_EXPR_TREE_DECL (x
))
3521 < DEBUG_TEMP_UID (DEBUG_EXPR_TREE_DECL (y
)))
3523 gcc_checking_assert (DEBUG_TEMP_UID (DEBUG_EXPR_TREE_DECL (x
))
3524 > DEBUG_TEMP_UID (DEBUG_EXPR_TREE_DECL (y
)));
3528 fmt
= GET_RTX_FORMAT (code
);
3529 for (i
= 0; i
< GET_RTX_LENGTH (code
); i
++)
3533 if (XWINT (x
, i
) == XWINT (y
, i
))
3535 else if (XWINT (x
, i
) < XWINT (y
, i
))
3542 if (XINT (x
, i
) == XINT (y
, i
))
3544 else if (XINT (x
, i
) < XINT (y
, i
))
3550 r
= compare_sizes_for_sort (SUBREG_BYTE (x
), SUBREG_BYTE (y
));
3557 /* Compare the vector length first. */
3558 if (XVECLEN (x
, i
) == XVECLEN (y
, i
))
3559 /* Compare the vectors elements. */;
3560 else if (XVECLEN (x
, i
) < XVECLEN (y
, i
))
3565 for (j
= 0; j
< XVECLEN (x
, i
); j
++)
3566 if ((r
= loc_cmp (XVECEXP (x
, i
, j
),
3567 XVECEXP (y
, i
, j
))))
3572 if ((r
= loc_cmp (XEXP (x
, i
), XEXP (y
, i
))))
3578 if (XSTR (x
, i
) == XSTR (y
, i
))
3584 if ((r
= strcmp (XSTR (x
, i
), XSTR (y
, i
))) == 0)
3592 /* These are just backpointers, so they don't matter. */
3599 /* It is believed that rtx's at this level will never
3600 contain anything but integers and other rtx's,
3601 except for within LABEL_REFs and SYMBOL_REFs. */
3605 if (CONST_WIDE_INT_P (x
))
3607 /* Compare the vector length first. */
3608 if (CONST_WIDE_INT_NUNITS (x
) >= CONST_WIDE_INT_NUNITS (y
))
3610 else if (CONST_WIDE_INT_NUNITS (x
) < CONST_WIDE_INT_NUNITS (y
))
3613 /* Compare the vectors elements. */;
3614 for (j
= CONST_WIDE_INT_NUNITS (x
) - 1; j
>= 0 ; j
--)
3616 if (CONST_WIDE_INT_ELT (x
, j
) < CONST_WIDE_INT_ELT (y
, j
))
3618 if (CONST_WIDE_INT_ELT (x
, j
) > CONST_WIDE_INT_ELT (y
, j
))
3626 /* Check the order of entries in one-part variables. */
3629 canonicalize_loc_order_check (variable
**slot
,
3630 dataflow_set
*data ATTRIBUTE_UNUSED
)
3632 variable
*var
= *slot
;
3633 location_chain
*node
, *next
;
3635 #ifdef ENABLE_RTL_CHECKING
3637 for (i
= 0; i
< var
->n_var_parts
; i
++)
3638 gcc_assert (var
->var_part
[0].cur_loc
== NULL
);
3639 gcc_assert (!var
->in_changed_variables
);
3645 gcc_assert (var
->n_var_parts
== 1);
3646 node
= var
->var_part
[0].loc_chain
;
3649 while ((next
= node
->next
))
3651 gcc_assert (loc_cmp (node
->loc
, next
->loc
) < 0);
3658 /* Mark with VALUE_RECURSED_INTO values that have neighbors that are
3659 more likely to be chosen as canonical for an equivalence set.
3660 Ensure less likely values can reach more likely neighbors, making
3661 the connections bidirectional. */
3664 canonicalize_values_mark (variable
**slot
, dataflow_set
*set
)
3666 variable
*var
= *slot
;
3667 decl_or_value dv
= var
->dv
;
3669 location_chain
*node
;
3671 if (!dv_is_value_p (dv
))
3674 gcc_checking_assert (var
->n_var_parts
== 1);
3676 val
= dv_as_value (dv
);
3678 for (node
= var
->var_part
[0].loc_chain
; node
; node
= node
->next
)
3679 if (GET_CODE (node
->loc
) == VALUE
)
3681 if (canon_value_cmp (node
->loc
, val
))
3682 VALUE_RECURSED_INTO (val
) = true;
3685 decl_or_value odv
= dv_from_value (node
->loc
);
3687 oslot
= shared_hash_find_slot_noinsert (set
->vars
, odv
);
3689 set_slot_part (set
, val
, oslot
, odv
, 0,
3690 node
->init
, NULL_RTX
);
3692 VALUE_RECURSED_INTO (node
->loc
) = true;
3699 /* Remove redundant entries from equivalence lists in onepart
3700 variables, canonicalizing equivalence sets into star shapes. */
3703 canonicalize_values_star (variable
**slot
, dataflow_set
*set
)
3705 variable
*var
= *slot
;
3706 decl_or_value dv
= var
->dv
;
3707 location_chain
*node
;
3717 gcc_checking_assert (var
->n_var_parts
== 1);
3719 if (dv_is_value_p (dv
))
3721 cval
= dv_as_value (dv
);
3722 if (!VALUE_RECURSED_INTO (cval
))
3724 VALUE_RECURSED_INTO (cval
) = false;
3734 gcc_assert (var
->n_var_parts
== 1);
3736 for (node
= var
->var_part
[0].loc_chain
; node
; node
= node
->next
)
3737 if (GET_CODE (node
->loc
) == VALUE
)
3740 if (VALUE_RECURSED_INTO (node
->loc
))
3742 if (canon_value_cmp (node
->loc
, cval
))
3751 if (!has_marks
|| dv_is_decl_p (dv
))
3754 /* Keep it marked so that we revisit it, either after visiting a
3755 child node, or after visiting a new parent that might be
3757 VALUE_RECURSED_INTO (val
) = true;
3759 for (node
= var
->var_part
[0].loc_chain
; node
; node
= node
->next
)
3760 if (GET_CODE (node
->loc
) == VALUE
3761 && VALUE_RECURSED_INTO (node
->loc
))
3765 VALUE_RECURSED_INTO (cval
) = false;
3766 dv
= dv_from_value (cval
);
3767 slot
= shared_hash_find_slot_noinsert (set
->vars
, dv
);
3770 gcc_assert (dv_is_decl_p (var
->dv
));
3771 /* The canonical value was reset and dropped.
3773 clobber_variable_part (set
, NULL
, var
->dv
, 0, NULL
);
3777 gcc_assert (dv_is_value_p (var
->dv
));
3778 if (var
->n_var_parts
== 0)
3780 gcc_assert (var
->n_var_parts
== 1);
3784 VALUE_RECURSED_INTO (val
) = false;
3789 /* Push values to the canonical one. */
3790 cdv
= dv_from_value (cval
);
3791 cslot
= shared_hash_find_slot_noinsert (set
->vars
, cdv
);
3793 for (node
= var
->var_part
[0].loc_chain
; node
; node
= node
->next
)
3794 if (node
->loc
!= cval
)
3796 cslot
= set_slot_part (set
, node
->loc
, cslot
, cdv
, 0,
3797 node
->init
, NULL_RTX
);
3798 if (GET_CODE (node
->loc
) == VALUE
)
3800 decl_or_value ndv
= dv_from_value (node
->loc
);
3802 set_variable_part (set
, cval
, ndv
, 0, node
->init
, NULL_RTX
,
3805 if (canon_value_cmp (node
->loc
, val
))
3807 /* If it could have been a local minimum, it's not any more,
3808 since it's now neighbor to cval, so it may have to push
3809 to it. Conversely, if it wouldn't have prevailed over
3810 val, then whatever mark it has is fine: if it was to
3811 push, it will now push to a more canonical node, but if
3812 it wasn't, then it has already pushed any values it might
3814 VALUE_RECURSED_INTO (node
->loc
) = true;
3815 /* Make sure we visit node->loc by ensuring we cval is
3817 VALUE_RECURSED_INTO (cval
) = true;
3819 else if (!VALUE_RECURSED_INTO (node
->loc
))
3820 /* If we have no need to "recurse" into this node, it's
3821 already "canonicalized", so drop the link to the old
3823 clobber_variable_part (set
, cval
, ndv
, 0, NULL
);
3825 else if (GET_CODE (node
->loc
) == REG
)
3827 attrs
*list
= set
->regs
[REGNO (node
->loc
)], **listp
;
3829 /* Change an existing attribute referring to dv so that it
3830 refers to cdv, removing any duplicate this might
3831 introduce, and checking that no previous duplicates
3832 existed, all in a single pass. */
3836 if (list
->offset
== 0
3837 && (dv_as_opaque (list
->dv
) == dv_as_opaque (dv
)
3838 || dv_as_opaque (list
->dv
) == dv_as_opaque (cdv
)))
3845 if (dv_as_opaque (list
->dv
) == dv_as_opaque (dv
))
3848 for (listp
= &list
->next
; (list
= *listp
); listp
= &list
->next
)
3853 if (dv_as_opaque (list
->dv
) == dv_as_opaque (cdv
))
3855 *listp
= list
->next
;
3861 gcc_assert (dv_as_opaque (list
->dv
) != dv_as_opaque (dv
));
3864 else if (dv_as_opaque (list
->dv
) == dv_as_opaque (cdv
))
3866 for (listp
= &list
->next
; (list
= *listp
); listp
= &list
->next
)
3871 if (dv_as_opaque (list
->dv
) == dv_as_opaque (dv
))
3873 *listp
= list
->next
;
3879 gcc_assert (dv_as_opaque (list
->dv
) != dv_as_opaque (cdv
));
3888 if (list
->offset
== 0
3889 && (dv_as_opaque (list
->dv
) == dv_as_opaque (dv
)
3890 || dv_as_opaque (list
->dv
) == dv_as_opaque (cdv
)))
3899 set_slot_part (set
, val
, cslot
, cdv
, 0,
3900 VAR_INIT_STATUS_INITIALIZED
, NULL_RTX
);
3902 slot
= clobber_slot_part (set
, cval
, slot
, 0, NULL
);
3904 /* Variable may have been unshared. */
3906 gcc_checking_assert (var
->n_var_parts
&& var
->var_part
[0].loc_chain
->loc
== cval
3907 && var
->var_part
[0].loc_chain
->next
== NULL
);
3909 if (VALUE_RECURSED_INTO (cval
))
3910 goto restart_with_cval
;
3915 /* Bind one-part variables to the canonical value in an equivalence
3916 set. Not doing this causes dataflow convergence failure in rare
3917 circumstances, see PR42873. Unfortunately we can't do this
3918 efficiently as part of canonicalize_values_star, since we may not
3919 have determined or even seen the canonical value of a set when we
3920 get to a variable that references another member of the set. */
3923 canonicalize_vars_star (variable
**slot
, dataflow_set
*set
)
3925 variable
*var
= *slot
;
3926 decl_or_value dv
= var
->dv
;
3927 location_chain
*node
;
3932 location_chain
*cnode
;
3934 if (!var
->onepart
|| var
->onepart
== ONEPART_VALUE
)
3937 gcc_assert (var
->n_var_parts
== 1);
3939 node
= var
->var_part
[0].loc_chain
;
3941 if (GET_CODE (node
->loc
) != VALUE
)
3944 gcc_assert (!node
->next
);
3947 /* Push values to the canonical one. */
3948 cdv
= dv_from_value (cval
);
3949 cslot
= shared_hash_find_slot_noinsert (set
->vars
, cdv
);
3953 gcc_assert (cvar
->n_var_parts
== 1);
3955 cnode
= cvar
->var_part
[0].loc_chain
;
3957 /* CVAL is canonical if its value list contains non-VALUEs or VALUEs
3958 that are not “more canonical” than it. */
3959 if (GET_CODE (cnode
->loc
) != VALUE
3960 || !canon_value_cmp (cnode
->loc
, cval
))
3963 /* CVAL was found to be non-canonical. Change the variable to point
3964 to the canonical VALUE. */
3965 gcc_assert (!cnode
->next
);
3968 slot
= set_slot_part (set
, cval
, slot
, dv
, 0,
3969 node
->init
, node
->set_src
);
3970 clobber_slot_part (set
, cval
, slot
, 0, node
->set_src
);
3975 /* Combine variable or value in *S1SLOT (in DSM->cur) with the
3976 corresponding entry in DSM->src. Multi-part variables are combined
3977 with variable_union, whereas onepart dvs are combined with
3981 variable_merge_over_cur (variable
*s1var
, struct dfset_merge
*dsm
)
3983 dataflow_set
*dst
= dsm
->dst
;
3985 variable
*s2var
, *dvar
= NULL
;
3986 decl_or_value dv
= s1var
->dv
;
3987 onepart_enum onepart
= s1var
->onepart
;
3990 location_chain
*node
, **nodep
;
3992 /* If the incoming onepart variable has an empty location list, then
3993 the intersection will be just as empty. For other variables,
3994 it's always union. */
3995 gcc_checking_assert (s1var
->n_var_parts
3996 && s1var
->var_part
[0].loc_chain
);
3999 return variable_union (s1var
, dst
);
4001 gcc_checking_assert (s1var
->n_var_parts
== 1);
4003 dvhash
= dv_htab_hash (dv
);
4004 if (dv_is_value_p (dv
))
4005 val
= dv_as_value (dv
);
4009 s2var
= shared_hash_find_1 (dsm
->src
->vars
, dv
, dvhash
);
4012 dst_can_be_shared
= false;
4016 dsm
->src_onepart_cnt
--;
4017 gcc_assert (s2var
->var_part
[0].loc_chain
4018 && s2var
->onepart
== onepart
4019 && s2var
->n_var_parts
== 1);
4021 dstslot
= shared_hash_find_slot_noinsert_1 (dst
->vars
, dv
, dvhash
);
4025 gcc_assert (dvar
->refcount
== 1
4026 && dvar
->onepart
== onepart
4027 && dvar
->n_var_parts
== 1);
4028 nodep
= &dvar
->var_part
[0].loc_chain
;
4036 if (!dstslot
&& !onepart_variable_different_p (s1var
, s2var
))
4038 dstslot
= shared_hash_find_slot_unshare_1 (&dst
->vars
, dv
,
4040 *dstslot
= dvar
= s2var
;
4045 dst_can_be_shared
= false;
4047 intersect_loc_chains (val
, nodep
, dsm
,
4048 s1var
->var_part
[0].loc_chain
, s2var
);
4054 dvar
= onepart_pool_allocate (onepart
);
4057 dvar
->n_var_parts
= 1;
4058 dvar
->onepart
= onepart
;
4059 dvar
->in_changed_variables
= false;
4060 dvar
->var_part
[0].loc_chain
= node
;
4061 dvar
->var_part
[0].cur_loc
= NULL
;
4063 VAR_LOC_1PAUX (dvar
) = NULL
;
4065 VAR_PART_OFFSET (dvar
, 0) = 0;
4068 = shared_hash_find_slot_unshare_1 (&dst
->vars
, dv
, dvhash
,
4070 gcc_assert (!*dstslot
);
4078 nodep
= &dvar
->var_part
[0].loc_chain
;
4079 while ((node
= *nodep
))
4081 location_chain
**nextp
= &node
->next
;
4083 if (GET_CODE (node
->loc
) == REG
)
4087 for (list
= dst
->regs
[REGNO (node
->loc
)]; list
; list
= list
->next
)
4088 if (GET_MODE (node
->loc
) == GET_MODE (list
->loc
)
4089 && dv_is_value_p (list
->dv
))
4093 attrs_list_insert (&dst
->regs
[REGNO (node
->loc
)],
4095 /* If this value became canonical for another value that had
4096 this register, we want to leave it alone. */
4097 else if (dv_as_value (list
->dv
) != val
)
4099 dstslot
= set_slot_part (dst
, dv_as_value (list
->dv
),
4101 node
->init
, NULL_RTX
);
4102 dstslot
= delete_slot_part (dst
, node
->loc
, dstslot
, 0);
4104 /* Since nextp points into the removed node, we can't
4105 use it. The pointer to the next node moved to nodep.
4106 However, if the variable we're walking is unshared
4107 during our walk, we'll keep walking the location list
4108 of the previously-shared variable, in which case the
4109 node won't have been removed, and we'll want to skip
4110 it. That's why we test *nodep here. */
4116 /* Canonicalization puts registers first, so we don't have to
4122 if (dvar
!= *dstslot
)
4124 nodep
= &dvar
->var_part
[0].loc_chain
;
4128 /* Mark all referenced nodes for canonicalization, and make sure
4129 we have mutual equivalence links. */
4130 VALUE_RECURSED_INTO (val
) = true;
4131 for (node
= *nodep
; node
; node
= node
->next
)
4132 if (GET_CODE (node
->loc
) == VALUE
)
4134 VALUE_RECURSED_INTO (node
->loc
) = true;
4135 set_variable_part (dst
, val
, dv_from_value (node
->loc
), 0,
4136 node
->init
, NULL
, INSERT
);
4139 dstslot
= shared_hash_find_slot_noinsert_1 (dst
->vars
, dv
, dvhash
);
4140 gcc_assert (*dstslot
== dvar
);
4141 canonicalize_values_star (dstslot
, dst
);
4142 gcc_checking_assert (dstslot
4143 == shared_hash_find_slot_noinsert_1 (dst
->vars
,
4149 bool has_value
= false, has_other
= false;
4151 /* If we have one value and anything else, we're going to
4152 canonicalize this, so make sure all values have an entry in
4153 the table and are marked for canonicalization. */
4154 for (node
= *nodep
; node
; node
= node
->next
)
4156 if (GET_CODE (node
->loc
) == VALUE
)
4158 /* If this was marked during register canonicalization,
4159 we know we have to canonicalize values. */
4174 if (has_value
&& has_other
)
4176 for (node
= *nodep
; node
; node
= node
->next
)
4178 if (GET_CODE (node
->loc
) == VALUE
)
4180 decl_or_value dv
= dv_from_value (node
->loc
);
4181 variable
**slot
= NULL
;
4183 if (shared_hash_shared (dst
->vars
))
4184 slot
= shared_hash_find_slot_noinsert (dst
->vars
, dv
);
4186 slot
= shared_hash_find_slot_unshare (&dst
->vars
, dv
,
4190 variable
*var
= onepart_pool_allocate (ONEPART_VALUE
);
4193 var
->n_var_parts
= 1;
4194 var
->onepart
= ONEPART_VALUE
;
4195 var
->in_changed_variables
= false;
4196 var
->var_part
[0].loc_chain
= NULL
;
4197 var
->var_part
[0].cur_loc
= NULL
;
4198 VAR_LOC_1PAUX (var
) = NULL
;
4202 VALUE_RECURSED_INTO (node
->loc
) = true;
4206 dstslot
= shared_hash_find_slot_noinsert_1 (dst
->vars
, dv
, dvhash
);
4207 gcc_assert (*dstslot
== dvar
);
4208 canonicalize_values_star (dstslot
, dst
);
4209 gcc_checking_assert (dstslot
4210 == shared_hash_find_slot_noinsert_1 (dst
->vars
,
4216 if (!onepart_variable_different_p (dvar
, s2var
))
4218 variable_htab_free (dvar
);
4219 *dstslot
= dvar
= s2var
;
4222 else if (s2var
!= s1var
&& !onepart_variable_different_p (dvar
, s1var
))
4224 variable_htab_free (dvar
);
4225 *dstslot
= dvar
= s1var
;
4227 dst_can_be_shared
= false;
4230 dst_can_be_shared
= false;
4235 /* Copy s2slot (in DSM->src) to DSM->dst if the variable is a
4236 multi-part variable. Unions of multi-part variables and
4237 intersections of one-part ones will be handled in
4238 variable_merge_over_cur(). */
4241 variable_merge_over_src (variable
*s2var
, struct dfset_merge
*dsm
)
4243 dataflow_set
*dst
= dsm
->dst
;
4244 decl_or_value dv
= s2var
->dv
;
4246 if (!s2var
->onepart
)
4248 variable
**dstp
= shared_hash_find_slot (dst
->vars
, dv
);
4254 dsm
->src_onepart_cnt
++;
4258 /* Combine dataflow set information from SRC2 into DST, using PDST
4259 to carry over information across passes. */
4262 dataflow_set_merge (dataflow_set
*dst
, dataflow_set
*src2
)
4264 dataflow_set cur
= *dst
;
4265 dataflow_set
*src1
= &cur
;
4266 struct dfset_merge dsm
;
4268 size_t src1_elems
, src2_elems
;
4269 variable_iterator_type hi
;
4272 src1_elems
= shared_hash_htab (src1
->vars
)->elements ();
4273 src2_elems
= shared_hash_htab (src2
->vars
)->elements ();
4274 dataflow_set_init (dst
);
4275 dst
->stack_adjust
= cur
.stack_adjust
;
4276 shared_hash_destroy (dst
->vars
);
4277 dst
->vars
= new shared_hash
;
4278 dst
->vars
->refcount
= 1;
4279 dst
->vars
->htab
= new variable_table_type (MAX (src1_elems
, src2_elems
));
4281 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
4282 attrs_list_mpdv_union (&dst
->regs
[i
], src1
->regs
[i
], src2
->regs
[i
]);
4287 dsm
.src_onepart_cnt
= 0;
4289 FOR_EACH_HASH_TABLE_ELEMENT (*shared_hash_htab (dsm
.src
->vars
),
4291 variable_merge_over_src (var
, &dsm
);
4292 FOR_EACH_HASH_TABLE_ELEMENT (*shared_hash_htab (dsm
.cur
->vars
),
4294 variable_merge_over_cur (var
, &dsm
);
4296 if (dsm
.src_onepart_cnt
)
4297 dst_can_be_shared
= false;
4299 dataflow_set_destroy (src1
);
4302 /* Mark register equivalences. */
4305 dataflow_set_equiv_regs (dataflow_set
*set
)
4308 attrs
*list
, **listp
;
4310 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
4312 rtx canon
[NUM_MACHINE_MODES
];
4314 /* If the list is empty or one entry, no need to canonicalize
4316 if (set
->regs
[i
] == NULL
|| set
->regs
[i
]->next
== NULL
)
4319 memset (canon
, 0, sizeof (canon
));
4321 for (list
= set
->regs
[i
]; list
; list
= list
->next
)
4322 if (list
->offset
== 0 && dv_is_value_p (list
->dv
))
4324 rtx val
= dv_as_value (list
->dv
);
4325 rtx
*cvalp
= &canon
[(int)GET_MODE (val
)];
4328 if (canon_value_cmp (val
, cval
))
4332 for (list
= set
->regs
[i
]; list
; list
= list
->next
)
4333 if (list
->offset
== 0 && dv_onepart_p (list
->dv
))
4335 rtx cval
= canon
[(int)GET_MODE (list
->loc
)];
4340 if (dv_is_value_p (list
->dv
))
4342 rtx val
= dv_as_value (list
->dv
);
4347 VALUE_RECURSED_INTO (val
) = true;
4348 set_variable_part (set
, val
, dv_from_value (cval
), 0,
4349 VAR_INIT_STATUS_INITIALIZED
,
4353 VALUE_RECURSED_INTO (cval
) = true;
4354 set_variable_part (set
, cval
, list
->dv
, 0,
4355 VAR_INIT_STATUS_INITIALIZED
, NULL
, NO_INSERT
);
4358 for (listp
= &set
->regs
[i
]; (list
= *listp
);
4359 listp
= list
? &list
->next
: listp
)
4360 if (list
->offset
== 0 && dv_onepart_p (list
->dv
))
4362 rtx cval
= canon
[(int)GET_MODE (list
->loc
)];
4368 if (dv_is_value_p (list
->dv
))
4370 rtx val
= dv_as_value (list
->dv
);
4371 if (!VALUE_RECURSED_INTO (val
))
4375 slot
= shared_hash_find_slot_noinsert (set
->vars
, list
->dv
);
4376 canonicalize_values_star (slot
, set
);
4383 /* Remove any redundant values in the location list of VAR, which must
4384 be unshared and 1-part. */
4387 remove_duplicate_values (variable
*var
)
4389 location_chain
*node
, **nodep
;
4391 gcc_assert (var
->onepart
);
4392 gcc_assert (var
->n_var_parts
== 1);
4393 gcc_assert (var
->refcount
== 1);
4395 for (nodep
= &var
->var_part
[0].loc_chain
; (node
= *nodep
); )
4397 if (GET_CODE (node
->loc
) == VALUE
)
4399 if (VALUE_RECURSED_INTO (node
->loc
))
4401 /* Remove duplicate value node. */
4402 *nodep
= node
->next
;
4407 VALUE_RECURSED_INTO (node
->loc
) = true;
4409 nodep
= &node
->next
;
4412 for (node
= var
->var_part
[0].loc_chain
; node
; node
= node
->next
)
4413 if (GET_CODE (node
->loc
) == VALUE
)
4415 gcc_assert (VALUE_RECURSED_INTO (node
->loc
));
4416 VALUE_RECURSED_INTO (node
->loc
) = false;
4421 /* Hash table iteration argument passed to variable_post_merge. */
4422 struct dfset_post_merge
4424 /* The new input set for the current block. */
4426 /* Pointer to the permanent input set for the current block, or
4428 dataflow_set
**permp
;
4431 /* Create values for incoming expressions associated with one-part
4432 variables that don't have value numbers for them. */
4435 variable_post_merge_new_vals (variable
**slot
, dfset_post_merge
*dfpm
)
4437 dataflow_set
*set
= dfpm
->set
;
4438 variable
*var
= *slot
;
4439 location_chain
*node
;
4441 if (!var
->onepart
|| !var
->n_var_parts
)
4444 gcc_assert (var
->n_var_parts
== 1);
4446 if (dv_is_decl_p (var
->dv
))
4448 bool check_dupes
= false;
4451 for (node
= var
->var_part
[0].loc_chain
; node
; node
= node
->next
)
4453 if (GET_CODE (node
->loc
) == VALUE
)
4454 gcc_assert (!VALUE_RECURSED_INTO (node
->loc
));
4455 else if (GET_CODE (node
->loc
) == REG
)
4457 attrs
*att
, **attp
, **curp
= NULL
;
4459 if (var
->refcount
!= 1)
4461 slot
= unshare_variable (set
, slot
, var
,
4462 VAR_INIT_STATUS_INITIALIZED
);
4467 for (attp
= &set
->regs
[REGNO (node
->loc
)]; (att
= *attp
);
4469 if (att
->offset
== 0
4470 && GET_MODE (att
->loc
) == GET_MODE (node
->loc
))
4472 if (dv_is_value_p (att
->dv
))
4474 rtx cval
= dv_as_value (att
->dv
);
4479 else if (dv_as_opaque (att
->dv
) == dv_as_opaque (var
->dv
))
4487 if ((*curp
)->offset
== 0
4488 && GET_MODE ((*curp
)->loc
) == GET_MODE (node
->loc
)
4489 && dv_as_opaque ((*curp
)->dv
) == dv_as_opaque (var
->dv
))
4492 curp
= &(*curp
)->next
;
4503 *dfpm
->permp
= XNEW (dataflow_set
);
4504 dataflow_set_init (*dfpm
->permp
);
4507 for (att
= (*dfpm
->permp
)->regs
[REGNO (node
->loc
)];
4508 att
; att
= att
->next
)
4509 if (GET_MODE (att
->loc
) == GET_MODE (node
->loc
))
4511 gcc_assert (att
->offset
== 0
4512 && dv_is_value_p (att
->dv
));
4513 val_reset (set
, att
->dv
);
4520 cval
= dv_as_value (cdv
);
4524 /* Create a unique value to hold this register,
4525 that ought to be found and reused in
4526 subsequent rounds. */
4528 gcc_assert (!cselib_lookup (node
->loc
,
4529 GET_MODE (node
->loc
), 0,
4531 v
= cselib_lookup (node
->loc
, GET_MODE (node
->loc
), 1,
4533 cselib_preserve_value (v
);
4534 cselib_invalidate_rtx (node
->loc
);
4536 cdv
= dv_from_value (cval
);
4539 "Created new value %u:%u for reg %i\n",
4540 v
->uid
, v
->hash
, REGNO (node
->loc
));
4543 var_reg_decl_set (*dfpm
->permp
, node
->loc
,
4544 VAR_INIT_STATUS_INITIALIZED
,
4545 cdv
, 0, NULL
, INSERT
);
4551 /* Remove attribute referring to the decl, which now
4552 uses the value for the register, already existing or
4553 to be added when we bring perm in. */
4561 remove_duplicate_values (var
);
4567 /* Reset values in the permanent set that are not associated with the
4568 chosen expression. */
4571 variable_post_merge_perm_vals (variable
**pslot
, dfset_post_merge
*dfpm
)
4573 dataflow_set
*set
= dfpm
->set
;
4574 variable
*pvar
= *pslot
, *var
;
4575 location_chain
*pnode
;
4579 gcc_assert (dv_is_value_p (pvar
->dv
)
4580 && pvar
->n_var_parts
== 1);
4581 pnode
= pvar
->var_part
[0].loc_chain
;
4584 && REG_P (pnode
->loc
));
4588 var
= shared_hash_find (set
->vars
, dv
);
4591 /* Although variable_post_merge_new_vals may have made decls
4592 non-star-canonical, values that pre-existed in canonical form
4593 remain canonical, and newly-created values reference a single
4594 REG, so they are canonical as well. Since VAR has the
4595 location list for a VALUE, using find_loc_in_1pdv for it is
4596 fine, since VALUEs don't map back to DECLs. */
4597 if (find_loc_in_1pdv (pnode
->loc
, var
, shared_hash_htab (set
->vars
)))
4599 val_reset (set
, dv
);
4602 for (att
= set
->regs
[REGNO (pnode
->loc
)]; att
; att
= att
->next
)
4603 if (att
->offset
== 0
4604 && GET_MODE (att
->loc
) == GET_MODE (pnode
->loc
)
4605 && dv_is_value_p (att
->dv
))
4608 /* If there is a value associated with this register already, create
4610 if (att
&& dv_as_value (att
->dv
) != dv_as_value (dv
))
4612 rtx cval
= dv_as_value (att
->dv
);
4613 set_variable_part (set
, cval
, dv
, 0, pnode
->init
, NULL
, INSERT
);
4614 set_variable_part (set
, dv_as_value (dv
), att
->dv
, 0, pnode
->init
,
4619 attrs_list_insert (&set
->regs
[REGNO (pnode
->loc
)],
4621 variable_union (pvar
, set
);
4627 /* Just checking stuff and registering register attributes for
4631 dataflow_post_merge_adjust (dataflow_set
*set
, dataflow_set
**permp
)
4633 struct dfset_post_merge dfpm
;
4638 shared_hash_htab (set
->vars
)
4639 ->traverse
<dfset_post_merge
*, variable_post_merge_new_vals
> (&dfpm
);
4641 shared_hash_htab ((*permp
)->vars
)
4642 ->traverse
<dfset_post_merge
*, variable_post_merge_perm_vals
> (&dfpm
);
4643 shared_hash_htab (set
->vars
)
4644 ->traverse
<dataflow_set
*, canonicalize_values_star
> (set
);
4645 shared_hash_htab (set
->vars
)
4646 ->traverse
<dataflow_set
*, canonicalize_vars_star
> (set
);
4649 /* Return a node whose loc is a MEM that refers to EXPR in the
4650 location list of a one-part variable or value VAR, or in that of
4651 any values recursively mentioned in the location lists. */
4653 static location_chain
*
4654 find_mem_expr_in_1pdv (tree expr
, rtx val
, variable_table_type
*vars
)
4656 location_chain
*node
;
4659 location_chain
*where
= NULL
;
4664 gcc_assert (GET_CODE (val
) == VALUE
4665 && !VALUE_RECURSED_INTO (val
));
4667 dv
= dv_from_value (val
);
4668 var
= vars
->find_with_hash (dv
, dv_htab_hash (dv
));
4673 gcc_assert (var
->onepart
);
4675 if (!var
->n_var_parts
)
4678 VALUE_RECURSED_INTO (val
) = true;
4680 for (node
= var
->var_part
[0].loc_chain
; node
; node
= node
->next
)
4681 if (MEM_P (node
->loc
)
4682 && MEM_EXPR (node
->loc
) == expr
4683 && int_mem_offset (node
->loc
) == 0)
4688 else if (GET_CODE (node
->loc
) == VALUE
4689 && !VALUE_RECURSED_INTO (node
->loc
)
4690 && (where
= find_mem_expr_in_1pdv (expr
, node
->loc
, vars
)))
4693 VALUE_RECURSED_INTO (val
) = false;
4698 /* Return TRUE if the value of MEM may vary across a call. */
4701 mem_dies_at_call (rtx mem
)
4703 tree expr
= MEM_EXPR (mem
);
4709 decl
= get_base_address (expr
);
4717 return (may_be_aliased (decl
)
4718 || (!TREE_READONLY (decl
) && is_global_var (decl
)));
4721 /* Remove all MEMs from the location list of a hash table entry for a
4722 one-part variable, except those whose MEM attributes map back to
4723 the variable itself, directly or within a VALUE. */
4726 dataflow_set_preserve_mem_locs (variable
**slot
, dataflow_set
*set
)
4728 variable
*var
= *slot
;
4730 if (var
->onepart
== ONEPART_VDECL
|| var
->onepart
== ONEPART_DEXPR
)
4732 tree decl
= dv_as_decl (var
->dv
);
4733 location_chain
*loc
, **locp
;
4734 bool changed
= false;
4736 if (!var
->n_var_parts
)
4739 gcc_assert (var
->n_var_parts
== 1);
4741 if (shared_var_p (var
, set
->vars
))
4743 for (loc
= var
->var_part
[0].loc_chain
; loc
; loc
= loc
->next
)
4745 /* We want to remove dying MEMs that don't refer to DECL. */
4746 if (GET_CODE (loc
->loc
) == MEM
4747 && (MEM_EXPR (loc
->loc
) != decl
4748 || int_mem_offset (loc
->loc
) != 0)
4749 && mem_dies_at_call (loc
->loc
))
4751 /* We want to move here MEMs that do refer to DECL. */
4752 else if (GET_CODE (loc
->loc
) == VALUE
4753 && find_mem_expr_in_1pdv (decl
, loc
->loc
,
4754 shared_hash_htab (set
->vars
)))
4761 slot
= unshare_variable (set
, slot
, var
, VAR_INIT_STATUS_UNKNOWN
);
4763 gcc_assert (var
->n_var_parts
== 1);
4766 for (locp
= &var
->var_part
[0].loc_chain
, loc
= *locp
;
4769 rtx old_loc
= loc
->loc
;
4770 if (GET_CODE (old_loc
) == VALUE
)
4772 location_chain
*mem_node
4773 = find_mem_expr_in_1pdv (decl
, loc
->loc
,
4774 shared_hash_htab (set
->vars
));
4776 /* ??? This picks up only one out of multiple MEMs that
4777 refer to the same variable. Do we ever need to be
4778 concerned about dealing with more than one, or, given
4779 that they should all map to the same variable
4780 location, their addresses will have been merged and
4781 they will be regarded as equivalent? */
4784 loc
->loc
= mem_node
->loc
;
4785 loc
->set_src
= mem_node
->set_src
;
4786 loc
->init
= MIN (loc
->init
, mem_node
->init
);
4790 if (GET_CODE (loc
->loc
) != MEM
4791 || (MEM_EXPR (loc
->loc
) == decl
4792 && int_mem_offset (loc
->loc
) == 0)
4793 || !mem_dies_at_call (loc
->loc
))
4795 if (old_loc
!= loc
->loc
&& emit_notes
)
4797 if (old_loc
== var
->var_part
[0].cur_loc
)
4800 var
->var_part
[0].cur_loc
= NULL
;
4809 if (old_loc
== var
->var_part
[0].cur_loc
)
4812 var
->var_part
[0].cur_loc
= NULL
;
4819 if (!var
->var_part
[0].loc_chain
)
4825 variable_was_changed (var
, set
);
4831 /* Remove all MEMs from the location list of a hash table entry for a
4832 onepart variable. */
4835 dataflow_set_remove_mem_locs (variable
**slot
, dataflow_set
*set
)
4837 variable
*var
= *slot
;
4839 if (var
->onepart
!= NOT_ONEPART
)
4841 location_chain
*loc
, **locp
;
4842 bool changed
= false;
4845 gcc_assert (var
->n_var_parts
== 1);
4847 if (shared_var_p (var
, set
->vars
))
4849 for (loc
= var
->var_part
[0].loc_chain
; loc
; loc
= loc
->next
)
4850 if (GET_CODE (loc
->loc
) == MEM
4851 && mem_dies_at_call (loc
->loc
))
4857 slot
= unshare_variable (set
, slot
, var
, VAR_INIT_STATUS_UNKNOWN
);
4859 gcc_assert (var
->n_var_parts
== 1);
4862 if (VAR_LOC_1PAUX (var
))
4863 cur_loc
= VAR_LOC_FROM (var
);
4865 cur_loc
= var
->var_part
[0].cur_loc
;
4867 for (locp
= &var
->var_part
[0].loc_chain
, loc
= *locp
;
4870 if (GET_CODE (loc
->loc
) != MEM
4871 || !mem_dies_at_call (loc
->loc
))
4878 /* If we have deleted the location which was last emitted
4879 we have to emit new location so add the variable to set
4880 of changed variables. */
4881 if (cur_loc
== loc
->loc
)
4884 var
->var_part
[0].cur_loc
= NULL
;
4885 if (VAR_LOC_1PAUX (var
))
4886 VAR_LOC_FROM (var
) = NULL
;
4891 if (!var
->var_part
[0].loc_chain
)
4897 variable_was_changed (var
, set
);
4903 /* Remove all variable-location information about call-clobbered
4904 registers, as well as associations between MEMs and VALUEs. */
4907 dataflow_set_clear_at_call (dataflow_set
*set
, rtx_insn
*call_insn
)
4910 hard_reg_set_iterator hrsi
;
4912 HARD_REG_SET callee_clobbers
4913 = insn_callee_abi (call_insn
).full_reg_clobbers ();
4915 EXECUTE_IF_SET_IN_HARD_REG_SET (callee_clobbers
, 0, r
, hrsi
)
4916 var_regno_delete (set
, r
);
4918 if (MAY_HAVE_DEBUG_BIND_INSNS
)
4920 set
->traversed_vars
= set
->vars
;
4921 shared_hash_htab (set
->vars
)
4922 ->traverse
<dataflow_set
*, dataflow_set_preserve_mem_locs
> (set
);
4923 set
->traversed_vars
= set
->vars
;
4924 shared_hash_htab (set
->vars
)
4925 ->traverse
<dataflow_set
*, dataflow_set_remove_mem_locs
> (set
);
4926 set
->traversed_vars
= NULL
;
4931 variable_part_different_p (variable_part
*vp1
, variable_part
*vp2
)
4933 location_chain
*lc1
, *lc2
;
4935 for (lc1
= vp1
->loc_chain
; lc1
; lc1
= lc1
->next
)
4937 for (lc2
= vp2
->loc_chain
; lc2
; lc2
= lc2
->next
)
4939 if (REG_P (lc1
->loc
) && REG_P (lc2
->loc
))
4941 if (REGNO (lc1
->loc
) == REGNO (lc2
->loc
))
4944 if (rtx_equal_p (lc1
->loc
, lc2
->loc
))
4953 /* Return true if one-part variables VAR1 and VAR2 are different.
4954 They must be in canonical order. */
4957 onepart_variable_different_p (variable
*var1
, variable
*var2
)
4959 location_chain
*lc1
, *lc2
;
4964 gcc_assert (var1
->n_var_parts
== 1
4965 && var2
->n_var_parts
== 1);
4967 lc1
= var1
->var_part
[0].loc_chain
;
4968 lc2
= var2
->var_part
[0].loc_chain
;
4970 gcc_assert (lc1
&& lc2
);
4974 if (loc_cmp (lc1
->loc
, lc2
->loc
))
4983 /* Return true if one-part variables VAR1 and VAR2 are different.
4984 They must be in canonical order. */
4987 dump_onepart_variable_differences (variable
*var1
, variable
*var2
)
4989 location_chain
*lc1
, *lc2
;
4991 gcc_assert (var1
!= var2
);
4992 gcc_assert (dump_file
);
4993 gcc_assert (dv_as_opaque (var1
->dv
) == dv_as_opaque (var2
->dv
));
4994 gcc_assert (var1
->n_var_parts
== 1
4995 && var2
->n_var_parts
== 1);
4997 lc1
= var1
->var_part
[0].loc_chain
;
4998 lc2
= var2
->var_part
[0].loc_chain
;
5000 gcc_assert (lc1
&& lc2
);
5004 switch (loc_cmp (lc1
->loc
, lc2
->loc
))
5007 fprintf (dump_file
, "removed: ");
5008 print_rtl_single (dump_file
, lc1
->loc
);
5014 fprintf (dump_file
, "added: ");
5015 print_rtl_single (dump_file
, lc2
->loc
);
5027 fprintf (dump_file
, "removed: ");
5028 print_rtl_single (dump_file
, lc1
->loc
);
5034 fprintf (dump_file
, "added: ");
5035 print_rtl_single (dump_file
, lc2
->loc
);
5040 /* Return true if variables VAR1 and VAR2 are different. */
5043 variable_different_p (variable
*var1
, variable
*var2
)
5050 if (var1
->onepart
!= var2
->onepart
)
5053 if (var1
->n_var_parts
!= var2
->n_var_parts
)
5056 if (var1
->onepart
&& var1
->n_var_parts
)
5058 gcc_checking_assert (dv_as_opaque (var1
->dv
) == dv_as_opaque (var2
->dv
)
5059 && var1
->n_var_parts
== 1);
5060 /* One-part values have locations in a canonical order. */
5061 return onepart_variable_different_p (var1
, var2
);
5064 for (i
= 0; i
< var1
->n_var_parts
; i
++)
5066 if (VAR_PART_OFFSET (var1
, i
) != VAR_PART_OFFSET (var2
, i
))
5068 if (variable_part_different_p (&var1
->var_part
[i
], &var2
->var_part
[i
]))
5070 if (variable_part_different_p (&var2
->var_part
[i
], &var1
->var_part
[i
]))
5076 /* Return true if dataflow sets OLD_SET and NEW_SET differ. */
5079 dataflow_set_different (dataflow_set
*old_set
, dataflow_set
*new_set
)
5081 variable_iterator_type hi
;
5083 bool diffound
= false;
5084 bool details
= (dump_file
&& (dump_flags
& TDF_DETAILS
));
5096 if (old_set
->vars
== new_set
->vars
)
5099 if (shared_hash_htab (old_set
->vars
)->elements ()
5100 != shared_hash_htab (new_set
->vars
)->elements ())
5103 FOR_EACH_HASH_TABLE_ELEMENT (*shared_hash_htab (old_set
->vars
),
5106 variable_table_type
*htab
= shared_hash_htab (new_set
->vars
);
5107 variable
*var2
= htab
->find_with_hash (var1
->dv
, dv_htab_hash (var1
->dv
));
5111 if (dump_file
&& (dump_flags
& TDF_DETAILS
))
5113 fprintf (dump_file
, "dataflow difference found: removal of:\n");
5118 else if (variable_different_p (var1
, var2
))
5122 fprintf (dump_file
, "dataflow difference found: "
5123 "old and new follow:\n");
5125 if (dv_onepart_p (var1
->dv
))
5126 dump_onepart_variable_differences (var1
, var2
);
5133 /* There's no need to traverse the second hashtab unless we want to
5134 print the details. If both have the same number of elements and
5135 the second one had all entries found in the first one, then the
5136 second can't have any extra entries. */
5140 FOR_EACH_HASH_TABLE_ELEMENT (*shared_hash_htab (new_set
->vars
),
5143 variable_table_type
*htab
= shared_hash_htab (old_set
->vars
);
5144 variable
*var2
= htab
->find_with_hash (var1
->dv
, dv_htab_hash (var1
->dv
));
5149 fprintf (dump_file
, "dataflow difference found: addition of:\n");
5161 /* Free the contents of dataflow set SET. */
5164 dataflow_set_destroy (dataflow_set
*set
)
5168 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
5169 attrs_list_clear (&set
->regs
[i
]);
5171 shared_hash_destroy (set
->vars
);
5175 /* Return true if T is a tracked parameter with non-degenerate record type. */
5178 tracked_record_parameter_p (tree t
)
5180 if (TREE_CODE (t
) != PARM_DECL
)
5183 if (DECL_MODE (t
) == BLKmode
)
5186 tree type
= TREE_TYPE (t
);
5187 if (TREE_CODE (type
) != RECORD_TYPE
)
5190 if (TYPE_FIELDS (type
) == NULL_TREE
5191 || DECL_CHAIN (TYPE_FIELDS (type
)) == NULL_TREE
)
5197 /* Shall EXPR be tracked? */
5200 track_expr_p (tree expr
, bool need_rtl
)
5205 if (TREE_CODE (expr
) == DEBUG_EXPR_DECL
)
5206 return DECL_RTL_SET_P (expr
);
5208 /* If EXPR is not a parameter or a variable do not track it. */
5209 if (!VAR_P (expr
) && TREE_CODE (expr
) != PARM_DECL
)
5212 /* It also must have a name... */
5213 if (!DECL_NAME (expr
) && need_rtl
)
5216 /* ... and a RTL assigned to it. */
5217 decl_rtl
= DECL_RTL_IF_SET (expr
);
5218 if (!decl_rtl
&& need_rtl
)
5221 /* If this expression is really a debug alias of some other declaration, we
5222 don't need to track this expression if the ultimate declaration is
5225 if (VAR_P (realdecl
) && DECL_HAS_DEBUG_EXPR_P (realdecl
))
5227 realdecl
= DECL_DEBUG_EXPR (realdecl
);
5228 if (!DECL_P (realdecl
))
5230 if (handled_component_p (realdecl
)
5231 || (TREE_CODE (realdecl
) == MEM_REF
5232 && TREE_CODE (TREE_OPERAND (realdecl
, 0)) == ADDR_EXPR
))
5234 HOST_WIDE_INT bitsize
, bitpos
;
5237 = get_ref_base_and_extent_hwi (realdecl
, &bitpos
,
5238 &bitsize
, &reverse
);
5240 || !DECL_P (innerdecl
)
5241 || DECL_IGNORED_P (innerdecl
)
5242 /* Do not track declarations for parts of tracked record
5243 parameters since we want to track them as a whole. */
5244 || tracked_record_parameter_p (innerdecl
)
5245 || TREE_STATIC (innerdecl
)
5247 || bitpos
+ bitsize
> 256)
5257 /* Do not track EXPR if REALDECL it should be ignored for debugging
5259 if (DECL_IGNORED_P (realdecl
))
5262 /* Do not track global variables until we are able to emit correct location
5264 if (TREE_STATIC (realdecl
))
5267 /* When the EXPR is a DECL for alias of some variable (see example)
5268 the TREE_STATIC flag is not used. Disable tracking all DECLs whose
5269 DECL_RTL contains SYMBOL_REF.
5272 extern char **_dl_argv_internal __attribute__ ((alias ("_dl_argv")));
5275 if (decl_rtl
&& MEM_P (decl_rtl
)
5276 && contains_symbol_ref_p (XEXP (decl_rtl
, 0)))
5279 /* If RTX is a memory it should not be very large (because it would be
5280 an array or struct). */
5281 if (decl_rtl
&& MEM_P (decl_rtl
))
5283 /* Do not track structures and arrays. */
5284 if ((GET_MODE (decl_rtl
) == BLKmode
5285 || AGGREGATE_TYPE_P (TREE_TYPE (realdecl
)))
5286 && !tracked_record_parameter_p (realdecl
))
5288 if (MEM_SIZE_KNOWN_P (decl_rtl
)
5289 && maybe_gt (MEM_SIZE (decl_rtl
), MAX_VAR_PARTS
))
5293 DECL_CHANGED (expr
) = 0;
5294 DECL_CHANGED (realdecl
) = 0;
5298 /* Determine whether a given LOC refers to the same variable part as
5302 same_variable_part_p (rtx loc
, tree expr
, poly_int64 offset
)
5307 if (! DECL_P (expr
))
5312 expr2
= REG_EXPR (loc
);
5313 offset2
= REG_OFFSET (loc
);
5315 else if (MEM_P (loc
))
5317 expr2
= MEM_EXPR (loc
);
5318 offset2
= int_mem_offset (loc
);
5323 if (! expr2
|| ! DECL_P (expr2
))
5326 expr
= var_debug_decl (expr
);
5327 expr2
= var_debug_decl (expr2
);
5329 return (expr
== expr2
&& known_eq (offset
, offset2
));
5332 /* LOC is a REG or MEM that we would like to track if possible.
5333 If EXPR is null, we don't know what expression LOC refers to,
5334 otherwise it refers to EXPR + OFFSET. STORE_REG_P is true if
5335 LOC is an lvalue register.
5337 Return true if EXPR is nonnull and if LOC, or some lowpart of it,
5338 is something we can track. When returning true, store the mode of
5339 the lowpart we can track in *MODE_OUT (if nonnull) and its offset
5340 from EXPR in *OFFSET_OUT (if nonnull). */
5343 track_loc_p (rtx loc
, tree expr
, poly_int64 offset
, bool store_reg_p
,
5344 machine_mode
*mode_out
, HOST_WIDE_INT
*offset_out
)
5348 if (expr
== NULL
|| !track_expr_p (expr
, true))
5351 /* If REG was a paradoxical subreg, its REG_ATTRS will describe the
5352 whole subreg, but only the old inner part is really relevant. */
5353 mode
= GET_MODE (loc
);
5354 if (REG_P (loc
) && !HARD_REGISTER_NUM_P (ORIGINAL_REGNO (loc
)))
5356 machine_mode pseudo_mode
;
5358 pseudo_mode
= PSEUDO_REGNO_MODE (ORIGINAL_REGNO (loc
));
5359 if (paradoxical_subreg_p (mode
, pseudo_mode
))
5361 offset
+= byte_lowpart_offset (pseudo_mode
, mode
);
5366 /* If LOC is a paradoxical lowpart of EXPR, refer to EXPR itself.
5367 Do the same if we are storing to a register and EXPR occupies
5368 the whole of register LOC; in that case, the whole of EXPR is
5369 being changed. We exclude complex modes from the second case
5370 because the real and imaginary parts are represented as separate
5371 pseudo registers, even if the whole complex value fits into one
5373 if ((paradoxical_subreg_p (mode
, DECL_MODE (expr
))
5375 && !COMPLEX_MODE_P (DECL_MODE (expr
))
5376 && hard_regno_nregs (REGNO (loc
), DECL_MODE (expr
)) == 1))
5377 && known_eq (offset
+ byte_lowpart_offset (DECL_MODE (expr
), mode
), 0))
5379 mode
= DECL_MODE (expr
);
5383 HOST_WIDE_INT const_offset
;
5384 if (!track_offset_p (offset
, &const_offset
))
5390 *offset_out
= const_offset
;
5394 /* Return the MODE lowpart of LOC, or null if LOC is not something we
5395 want to track. When returning nonnull, make sure that the attributes
5396 on the returned value are updated. */
5399 var_lowpart (machine_mode mode
, rtx loc
)
5403 if (GET_MODE (loc
) == mode
)
5406 if (!REG_P (loc
) && !MEM_P (loc
))
5409 poly_uint64 offset
= byte_lowpart_offset (mode
, GET_MODE (loc
));
5412 return adjust_address_nv (loc
, mode
, offset
);
5414 poly_uint64 reg_offset
= subreg_lowpart_offset (mode
, GET_MODE (loc
));
5415 regno
= REGNO (loc
) + subreg_regno_offset (REGNO (loc
), GET_MODE (loc
),
5417 return gen_rtx_REG_offset (loc
, mode
, regno
, offset
);
5420 /* Carry information about uses and stores while walking rtx. */
5422 struct count_use_info
5424 /* The insn where the RTX is. */
5427 /* The basic block where insn is. */
5430 /* The array of n_sets sets in the insn, as determined by cselib. */
5431 struct cselib_set
*sets
;
5434 /* True if we're counting stores, false otherwise. */
5438 /* Find a VALUE corresponding to X. */
5440 static inline cselib_val
*
5441 find_use_val (rtx x
, machine_mode mode
, struct count_use_info
*cui
)
5447 /* This is called after uses are set up and before stores are
5448 processed by cselib, so it's safe to look up srcs, but not
5449 dsts. So we look up expressions that appear in srcs or in
5450 dest expressions, but we search the sets array for dests of
5454 /* Some targets represent memset and memcpy patterns
5455 by (set (mem:BLK ...) (reg:[QHSD]I ...)) or
5456 (set (mem:BLK ...) (const_int ...)) or
5457 (set (mem:BLK ...) (mem:BLK ...)). Don't return anything
5458 in that case, otherwise we end up with mode mismatches. */
5459 if (mode
== BLKmode
&& MEM_P (x
))
5461 for (i
= 0; i
< cui
->n_sets
; i
++)
5462 if (cui
->sets
[i
].dest
== x
)
5463 return cui
->sets
[i
].src_elt
;
5466 return cselib_lookup (x
, mode
, 0, VOIDmode
);
5472 /* Replace all registers and addresses in an expression with VALUE
5473 expressions that map back to them, unless the expression is a
5474 register. If no mapping is or can be performed, returns NULL. */
5477 replace_expr_with_values (rtx loc
)
5479 if (REG_P (loc
) || GET_CODE (loc
) == ENTRY_VALUE
)
5481 else if (MEM_P (loc
))
5483 cselib_val
*addr
= cselib_lookup (XEXP (loc
, 0),
5484 get_address_mode (loc
), 0,
5487 return replace_equiv_address_nv (loc
, addr
->val_rtx
);
5492 return cselib_subst_to_values (loc
, VOIDmode
);
5495 /* Return true if X contains a DEBUG_EXPR. */
5498 rtx_debug_expr_p (const_rtx x
)
5500 subrtx_iterator::array_type array
;
5501 FOR_EACH_SUBRTX (iter
, array
, x
, ALL
)
5502 if (GET_CODE (*iter
) == DEBUG_EXPR
)
5507 /* Determine what kind of micro operation to choose for a USE. Return
5508 MO_CLOBBER if no micro operation is to be generated. */
5510 static enum micro_operation_type
5511 use_type (rtx loc
, struct count_use_info
*cui
, machine_mode
*modep
)
5515 if (cui
&& cui
->sets
)
5517 if (GET_CODE (loc
) == VAR_LOCATION
)
5519 if (track_expr_p (PAT_VAR_LOCATION_DECL (loc
), false))
5521 rtx ploc
= PAT_VAR_LOCATION_LOC (loc
);
5522 if (! VAR_LOC_UNKNOWN_P (ploc
))
5524 cselib_val
*val
= cselib_lookup (ploc
, GET_MODE (loc
), 1,
5527 /* ??? flag_float_store and volatile mems are never
5528 given values, but we could in theory use them for
5530 gcc_assert (val
|| 1);
5538 if (REG_P (loc
) || MEM_P (loc
))
5541 *modep
= GET_MODE (loc
);
5545 || (find_use_val (loc
, GET_MODE (loc
), cui
)
5546 && cselib_lookup (XEXP (loc
, 0),
5547 get_address_mode (loc
), 0,
5553 cselib_val
*val
= find_use_val (loc
, GET_MODE (loc
), cui
);
5555 if (val
&& !cselib_preserved_value_p (val
))
5563 gcc_assert (REGNO (loc
) < FIRST_PSEUDO_REGISTER
);
5565 if (loc
== cfa_base_rtx
)
5567 expr
= REG_EXPR (loc
);
5570 return MO_USE_NO_VAR
;
5571 else if (target_for_debug_bind (var_debug_decl (expr
)))
5573 else if (track_loc_p (loc
, expr
, REG_OFFSET (loc
),
5574 false, modep
, NULL
))
5577 return MO_USE_NO_VAR
;
5579 else if (MEM_P (loc
))
5581 expr
= MEM_EXPR (loc
);
5585 else if (target_for_debug_bind (var_debug_decl (expr
)))
5587 else if (track_loc_p (loc
, expr
, int_mem_offset (loc
),
5589 /* Multi-part variables shouldn't refer to one-part
5590 variable names such as VALUEs (never happens) or
5591 DEBUG_EXPRs (only happens in the presence of debug
5593 && (!MAY_HAVE_DEBUG_BIND_INSNS
5594 || !rtx_debug_expr_p (XEXP (loc
, 0))))
5603 /* Log to OUT information about micro-operation MOPT involving X in
5607 log_op_type (rtx x
, basic_block bb
, rtx_insn
*insn
,
5608 enum micro_operation_type mopt
, FILE *out
)
5610 fprintf (out
, "bb %i op %i insn %i %s ",
5611 bb
->index
, VTI (bb
)->mos
.length (),
5612 INSN_UID (insn
), micro_operation_type_name
[mopt
]);
5613 print_inline_rtx (out
, x
, 2);
5617 /* Tell whether the CONCAT used to holds a VALUE and its location
5618 needs value resolution, i.e., an attempt of mapping the location
5619 back to other incoming values. */
5620 #define VAL_NEEDS_RESOLUTION(x) \
5621 (RTL_FLAG_CHECK1 ("VAL_NEEDS_RESOLUTION", (x), CONCAT)->volatil)
5622 /* Whether the location in the CONCAT is a tracked expression, that
5623 should also be handled like a MO_USE. */
5624 #define VAL_HOLDS_TRACK_EXPR(x) \
5625 (RTL_FLAG_CHECK1 ("VAL_HOLDS_TRACK_EXPR", (x), CONCAT)->used)
5626 /* Whether the location in the CONCAT should be handled like a MO_COPY
5628 #define VAL_EXPR_IS_COPIED(x) \
5629 (RTL_FLAG_CHECK1 ("VAL_EXPR_IS_COPIED", (x), CONCAT)->jump)
5630 /* Whether the location in the CONCAT should be handled like a
5631 MO_CLOBBER as well. */
5632 #define VAL_EXPR_IS_CLOBBERED(x) \
5633 (RTL_FLAG_CHECK1 ("VAL_EXPR_IS_CLOBBERED", (x), CONCAT)->unchanging)
5635 /* All preserved VALUEs. */
5636 static vec
<rtx
> preserved_values
;
5638 /* Ensure VAL is preserved and remember it in a vector for vt_emit_notes. */
5641 preserve_value (cselib_val
*val
)
5643 cselib_preserve_value (val
);
5644 preserved_values
.safe_push (val
->val_rtx
);
5647 /* Helper function for MO_VAL_LOC handling. Return non-zero if
5648 any rtxes not suitable for CONST use not replaced by VALUEs
5652 non_suitable_const (const_rtx x
)
5654 subrtx_iterator::array_type array
;
5655 FOR_EACH_SUBRTX (iter
, array
, x
, ALL
)
5657 const_rtx x
= *iter
;
5658 switch (GET_CODE (x
))
5669 if (!MEM_READONLY_P (x
))
5679 /* Add uses (register and memory references) LOC which will be tracked
5680 to VTI (bb)->mos. */
5683 add_uses (rtx loc
, struct count_use_info
*cui
)
5685 machine_mode mode
= VOIDmode
;
5686 enum micro_operation_type type
= use_type (loc
, cui
, &mode
);
5688 if (type
!= MO_CLOBBER
)
5690 basic_block bb
= cui
->bb
;
5694 mo
.u
.loc
= type
== MO_USE
? var_lowpart (mode
, loc
) : loc
;
5695 mo
.insn
= cui
->insn
;
5697 if (type
== MO_VAL_LOC
)
5700 rtx vloc
= PAT_VAR_LOCATION_LOC (oloc
);
5703 gcc_assert (cui
->sets
);
5706 && !REG_P (XEXP (vloc
, 0))
5707 && !MEM_P (XEXP (vloc
, 0)))
5710 machine_mode address_mode
= get_address_mode (mloc
);
5712 = cselib_lookup (XEXP (mloc
, 0), address_mode
, 0,
5715 if (val
&& !cselib_preserved_value_p (val
))
5716 preserve_value (val
);
5719 if (CONSTANT_P (vloc
)
5720 && (GET_CODE (vloc
) != CONST
|| non_suitable_const (vloc
)))
5721 /* For constants don't look up any value. */;
5722 else if (!VAR_LOC_UNKNOWN_P (vloc
) && !unsuitable_loc (vloc
)
5723 && (val
= find_use_val (vloc
, GET_MODE (oloc
), cui
)))
5726 enum micro_operation_type type2
;
5728 bool resolvable
= REG_P (vloc
) || MEM_P (vloc
);
5731 nloc
= replace_expr_with_values (vloc
);
5735 oloc
= shallow_copy_rtx (oloc
);
5736 PAT_VAR_LOCATION_LOC (oloc
) = nloc
;
5739 oloc
= gen_rtx_CONCAT (mode
, val
->val_rtx
, oloc
);
5741 type2
= use_type (vloc
, 0, &mode2
);
5743 gcc_assert (type2
== MO_USE
|| type2
== MO_USE_NO_VAR
5744 || type2
== MO_CLOBBER
);
5746 if (type2
== MO_CLOBBER
5747 && !cselib_preserved_value_p (val
))
5749 VAL_NEEDS_RESOLUTION (oloc
) = resolvable
;
5750 preserve_value (val
);
5753 else if (!VAR_LOC_UNKNOWN_P (vloc
))
5755 oloc
= shallow_copy_rtx (oloc
);
5756 PAT_VAR_LOCATION_LOC (oloc
) = gen_rtx_UNKNOWN_VAR_LOC ();
5761 else if (type
== MO_VAL_USE
)
5763 machine_mode mode2
= VOIDmode
;
5764 enum micro_operation_type type2
;
5765 cselib_val
*val
= find_use_val (loc
, GET_MODE (loc
), cui
);
5766 rtx vloc
, oloc
= loc
, nloc
;
5768 gcc_assert (cui
->sets
);
5771 && !REG_P (XEXP (oloc
, 0))
5772 && !MEM_P (XEXP (oloc
, 0)))
5775 machine_mode address_mode
= get_address_mode (mloc
);
5777 = cselib_lookup (XEXP (mloc
, 0), address_mode
, 0,
5780 if (val
&& !cselib_preserved_value_p (val
))
5781 preserve_value (val
);
5784 type2
= use_type (loc
, 0, &mode2
);
5786 gcc_assert (type2
== MO_USE
|| type2
== MO_USE_NO_VAR
5787 || type2
== MO_CLOBBER
);
5789 if (type2
== MO_USE
)
5790 vloc
= var_lowpart (mode2
, loc
);
5794 /* The loc of a MO_VAL_USE may have two forms:
5796 (concat val src): val is at src, a value-based
5799 (concat (concat val use) src): same as above, with use as
5800 the MO_USE tracked value, if it differs from src.
5804 gcc_checking_assert (REG_P (loc
) || MEM_P (loc
));
5805 nloc
= replace_expr_with_values (loc
);
5810 oloc
= gen_rtx_CONCAT (mode2
, val
->val_rtx
, vloc
);
5812 oloc
= val
->val_rtx
;
5814 mo
.u
.loc
= gen_rtx_CONCAT (mode
, oloc
, nloc
);
5816 if (type2
== MO_USE
)
5817 VAL_HOLDS_TRACK_EXPR (mo
.u
.loc
) = 1;
5818 if (!cselib_preserved_value_p (val
))
5820 VAL_NEEDS_RESOLUTION (mo
.u
.loc
) = 1;
5821 preserve_value (val
);
5825 gcc_assert (type
== MO_USE
|| type
== MO_USE_NO_VAR
);
5827 if (dump_file
&& (dump_flags
& TDF_DETAILS
))
5828 log_op_type (mo
.u
.loc
, cui
->bb
, cui
->insn
, mo
.type
, dump_file
);
5829 VTI (bb
)->mos
.safe_push (mo
);
5833 /* Helper function for finding all uses of REG/MEM in X in insn INSN. */
5836 add_uses_1 (rtx
*x
, void *cui
)
5838 subrtx_var_iterator::array_type array
;
5839 FOR_EACH_SUBRTX_VAR (iter
, array
, *x
, NONCONST
)
5840 add_uses (*iter
, (struct count_use_info
*) cui
);
5843 /* This is the value used during expansion of locations. We want it
5844 to be unbounded, so that variables expanded deep in a recursion
5845 nest are fully evaluated, so that their values are cached
5846 correctly. We avoid recursion cycles through other means, and we
5847 don't unshare RTL, so excess complexity is not a problem. */
5848 #define EXPR_DEPTH (INT_MAX)
5849 /* We use this to keep too-complex expressions from being emitted as
5850 location notes, and then to debug information. Users can trade
5851 compile time for ridiculously complex expressions, although they're
5852 seldom useful, and they may often have to be discarded as not
5853 representable anyway. */
5854 #define EXPR_USE_DEPTH (param_max_vartrack_expr_depth)
5856 /* Attempt to reverse the EXPR operation in the debug info and record
5857 it in the cselib table. Say for reg1 = reg2 + 6 even when reg2 is
5858 no longer live we can express its value as VAL - 6. */
5861 reverse_op (rtx val
, const_rtx expr
, rtx_insn
*insn
)
5865 struct elt_loc_list
*l
;
5869 if (GET_CODE (expr
) != SET
)
5872 if (!REG_P (SET_DEST (expr
)) || GET_MODE (val
) != GET_MODE (SET_DEST (expr
)))
5875 src
= SET_SRC (expr
);
5876 switch (GET_CODE (src
))
5883 if (!REG_P (XEXP (src
, 0)))
5888 if (!REG_P (XEXP (src
, 0)) && !MEM_P (XEXP (src
, 0)))
5895 if (!SCALAR_INT_MODE_P (GET_MODE (src
)) || XEXP (src
, 0) == cfa_base_rtx
)
5898 v
= cselib_lookup (XEXP (src
, 0), GET_MODE (XEXP (src
, 0)), 0, VOIDmode
);
5899 if (!v
|| !cselib_preserved_value_p (v
))
5902 /* Use canonical V to avoid creating multiple redundant expressions
5903 for different VALUES equivalent to V. */
5904 v
= canonical_cselib_val (v
);
5906 /* Adding a reverse op isn't useful if V already has an always valid
5907 location. Ignore ENTRY_VALUE, while it is always constant, we should
5908 prefer non-ENTRY_VALUE locations whenever possible. */
5909 for (l
= v
->locs
, count
= 0; l
; l
= l
->next
, count
++)
5910 if (CONSTANT_P (l
->loc
)
5911 && (GET_CODE (l
->loc
) != CONST
|| !references_value_p (l
->loc
, 0)))
5913 /* Avoid creating too large locs lists. */
5914 else if (count
== param_max_vartrack_reverse_op_size
)
5917 switch (GET_CODE (src
))
5921 if (GET_MODE (v
->val_rtx
) != GET_MODE (val
))
5923 ret
= gen_rtx_fmt_e (GET_CODE (src
), GET_MODE (val
), val
);
5927 ret
= gen_lowpart_SUBREG (GET_MODE (v
->val_rtx
), val
);
5939 if (GET_MODE (v
->val_rtx
) != GET_MODE (val
))
5941 arg
= XEXP (src
, 1);
5942 if (!CONST_INT_P (arg
) && GET_CODE (arg
) != SYMBOL_REF
)
5944 arg
= cselib_expand_value_rtx (arg
, scratch_regs
, 5);
5945 if (arg
== NULL_RTX
)
5947 if (!CONST_INT_P (arg
) && GET_CODE (arg
) != SYMBOL_REF
)
5950 ret
= simplify_gen_binary (code
, GET_MODE (val
), val
, arg
);
5956 cselib_add_permanent_equiv (v
, ret
, insn
);
5959 /* Add stores (register and memory references) LOC which will be tracked
5960 to VTI (bb)->mos. EXPR is the RTL expression containing the store.
5961 CUIP->insn is instruction which the LOC is part of. */
5964 add_stores (rtx loc
, const_rtx expr
, void *cuip
)
5966 machine_mode mode
= VOIDmode
, mode2
;
5967 struct count_use_info
*cui
= (struct count_use_info
*)cuip
;
5968 basic_block bb
= cui
->bb
;
5970 rtx oloc
= loc
, nloc
, src
= NULL
;
5971 enum micro_operation_type type
= use_type (loc
, cui
, &mode
);
5972 bool track_p
= false;
5974 bool resolve
, preserve
;
5976 if (type
== MO_CLOBBER
)
5983 gcc_assert (loc
!= cfa_base_rtx
);
5984 if ((GET_CODE (expr
) == CLOBBER
&& type
!= MO_VAL_SET
)
5985 || !(track_p
= use_type (loc
, NULL
, &mode2
) == MO_USE
)
5986 || GET_CODE (expr
) == CLOBBER
)
5988 mo
.type
= MO_CLOBBER
;
5990 if (GET_CODE (expr
) == SET
5991 && (SET_DEST (expr
) == loc
5992 || (GET_CODE (SET_DEST (expr
)) == STRICT_LOW_PART
5993 && XEXP (SET_DEST (expr
), 0) == loc
))
5994 && !unsuitable_loc (SET_SRC (expr
))
5995 && find_use_val (loc
, mode
, cui
))
5997 gcc_checking_assert (type
== MO_VAL_SET
);
5998 mo
.u
.loc
= gen_rtx_SET (loc
, SET_SRC (expr
));
6003 if (GET_CODE (expr
) == SET
6004 && SET_DEST (expr
) == loc
6005 && GET_CODE (SET_SRC (expr
)) != ASM_OPERANDS
)
6006 src
= var_lowpart (mode2
, SET_SRC (expr
));
6007 loc
= var_lowpart (mode2
, loc
);
6016 rtx xexpr
= gen_rtx_SET (loc
, src
);
6017 if (same_variable_part_p (src
, REG_EXPR (loc
), REG_OFFSET (loc
)))
6019 /* If this is an instruction copying (part of) a parameter
6020 passed by invisible reference to its register location,
6021 pretend it's a SET so that the initial memory location
6022 is discarded, as the parameter register can be reused
6023 for other purposes and we do not track locations based
6024 on generic registers. */
6027 && TREE_CODE (REG_EXPR (loc
)) == PARM_DECL
6028 && DECL_MODE (REG_EXPR (loc
)) != BLKmode
6029 && MEM_P (DECL_INCOMING_RTL (REG_EXPR (loc
)))
6030 && XEXP (DECL_INCOMING_RTL (REG_EXPR (loc
)), 0)
6041 mo
.insn
= cui
->insn
;
6043 else if (MEM_P (loc
)
6044 && ((track_p
= use_type (loc
, NULL
, &mode2
) == MO_USE
)
6047 if (MEM_P (loc
) && type
== MO_VAL_SET
6048 && !REG_P (XEXP (loc
, 0))
6049 && !MEM_P (XEXP (loc
, 0)))
6052 machine_mode address_mode
= get_address_mode (mloc
);
6053 cselib_val
*val
= cselib_lookup (XEXP (mloc
, 0),
6057 if (val
&& !cselib_preserved_value_p (val
))
6058 preserve_value (val
);
6061 if (GET_CODE (expr
) == CLOBBER
|| !track_p
)
6063 mo
.type
= MO_CLOBBER
;
6064 mo
.u
.loc
= track_p
? var_lowpart (mode2
, loc
) : loc
;
6068 if (GET_CODE (expr
) == SET
6069 && SET_DEST (expr
) == loc
6070 && GET_CODE (SET_SRC (expr
)) != ASM_OPERANDS
)
6071 src
= var_lowpart (mode2
, SET_SRC (expr
));
6072 loc
= var_lowpart (mode2
, loc
);
6081 rtx xexpr
= gen_rtx_SET (loc
, src
);
6082 if (same_variable_part_p (SET_SRC (xexpr
),
6084 int_mem_offset (loc
)))
6091 mo
.insn
= cui
->insn
;
6096 if (type
!= MO_VAL_SET
)
6097 goto log_and_return
;
6099 v
= find_use_val (oloc
, mode
, cui
);
6102 goto log_and_return
;
6104 resolve
= preserve
= !cselib_preserved_value_p (v
);
6106 /* We cannot track values for multiple-part variables, so we track only
6107 locations for tracked record parameters. */
6111 && tracked_record_parameter_p (REG_EXPR (loc
)))
6113 /* Although we don't use the value here, it could be used later by the
6114 mere virtue of its existence as the operand of the reverse operation
6115 that gave rise to it (typically extension/truncation). Make sure it
6116 is preserved as required by vt_expand_var_loc_chain. */
6119 goto log_and_return
;
6122 if (loc
== stack_pointer_rtx
6123 && (maybe_ne (hard_frame_pointer_adjustment
, -1)
6124 || (!frame_pointer_needed
&& !ACCUMULATE_OUTGOING_ARGS
))
6126 cselib_set_value_sp_based (v
);
6128 /* Don't record MO_VAL_SET for VALUEs that can be described using
6129 cfa_base_rtx or cfa_base_rtx + CONST_INT, cselib already knows
6130 all the needed equivalences and they shouldn't change depending
6131 on which register holds that VALUE in some instruction. */
6132 if (!frame_pointer_needed
6134 && cselib_sp_derived_value_p (v
))
6141 nloc
= replace_expr_with_values (oloc
);
6145 if (GET_CODE (PATTERN (cui
->insn
)) == COND_EXEC
)
6147 cselib_val
*oval
= cselib_lookup (oloc
, GET_MODE (oloc
), 0, VOIDmode
);
6151 gcc_assert (REG_P (oloc
) || MEM_P (oloc
));
6153 if (oval
&& !cselib_preserved_value_p (oval
))
6155 micro_operation moa
;
6157 preserve_value (oval
);
6159 moa
.type
= MO_VAL_USE
;
6160 moa
.u
.loc
= gen_rtx_CONCAT (mode
, oval
->val_rtx
, oloc
);
6161 VAL_NEEDS_RESOLUTION (moa
.u
.loc
) = 1;
6162 moa
.insn
= cui
->insn
;
6164 if (dump_file
&& (dump_flags
& TDF_DETAILS
))
6165 log_op_type (moa
.u
.loc
, cui
->bb
, cui
->insn
,
6166 moa
.type
, dump_file
);
6167 VTI (bb
)->mos
.safe_push (moa
);
6172 else if (resolve
&& GET_CODE (mo
.u
.loc
) == SET
)
6174 if (REG_P (SET_SRC (expr
)) || MEM_P (SET_SRC (expr
)))
6175 nloc
= replace_expr_with_values (SET_SRC (expr
));
6179 /* Avoid the mode mismatch between oexpr and expr. */
6180 if (!nloc
&& mode
!= mode2
)
6182 nloc
= SET_SRC (expr
);
6183 gcc_assert (oloc
== SET_DEST (expr
));
6186 if (nloc
&& nloc
!= SET_SRC (mo
.u
.loc
))
6187 oloc
= gen_rtx_SET (oloc
, nloc
);
6190 if (oloc
== SET_DEST (mo
.u
.loc
))
6191 /* No point in duplicating. */
6193 if (!REG_P (SET_SRC (mo
.u
.loc
)))
6199 if (GET_CODE (mo
.u
.loc
) == SET
6200 && oloc
== SET_DEST (mo
.u
.loc
))
6201 /* No point in duplicating. */
6207 loc
= gen_rtx_CONCAT (mode
, v
->val_rtx
, oloc
);
6209 if (mo
.u
.loc
!= oloc
)
6210 loc
= gen_rtx_CONCAT (GET_MODE (mo
.u
.loc
), loc
, mo
.u
.loc
);
6212 /* The loc of a MO_VAL_SET may have various forms:
6214 (concat val dst): dst now holds val
6216 (concat val (set dst src)): dst now holds val, copied from src
6218 (concat (concat val dstv) dst): dst now holds val; dstv is dst
6219 after replacing mems and non-top-level regs with values.
6221 (concat (concat val dstv) (set dst src)): dst now holds val,
6222 copied from src. dstv is a value-based representation of dst, if
6223 it differs from dst. If resolution is needed, src is a REG, and
6224 its mode is the same as that of val.
6226 (concat (concat val (set dstv srcv)) (set dst src)): src
6227 copied to dst, holding val. dstv and srcv are value-based
6228 representations of dst and src, respectively.
6232 if (GET_CODE (PATTERN (cui
->insn
)) != COND_EXEC
)
6233 reverse_op (v
->val_rtx
, expr
, cui
->insn
);
6238 VAL_HOLDS_TRACK_EXPR (loc
) = 1;
6241 VAL_NEEDS_RESOLUTION (loc
) = resolve
;
6244 if (mo
.type
== MO_CLOBBER
)
6245 VAL_EXPR_IS_CLOBBERED (loc
) = 1;
6246 if (mo
.type
== MO_COPY
)
6247 VAL_EXPR_IS_COPIED (loc
) = 1;
6249 mo
.type
= MO_VAL_SET
;
6252 if (dump_file
&& (dump_flags
& TDF_DETAILS
))
6253 log_op_type (mo
.u
.loc
, cui
->bb
, cui
->insn
, mo
.type
, dump_file
);
6254 VTI (bb
)->mos
.safe_push (mo
);
6257 /* Arguments to the call. */
6258 static rtx call_arguments
;
6260 /* Compute call_arguments. */
6263 prepare_call_arguments (basic_block bb
, rtx_insn
*insn
)
6266 rtx prev
, cur
, next
;
6267 rtx this_arg
= NULL_RTX
;
6268 tree type
= NULL_TREE
, t
, fndecl
= NULL_TREE
;
6269 tree obj_type_ref
= NULL_TREE
;
6270 CUMULATIVE_ARGS args_so_far_v
;
6271 cumulative_args_t args_so_far
;
6273 memset (&args_so_far_v
, 0, sizeof (args_so_far_v
));
6274 args_so_far
= pack_cumulative_args (&args_so_far_v
);
6275 call
= get_call_rtx_from (insn
);
6278 if (GET_CODE (XEXP (XEXP (call
, 0), 0)) == SYMBOL_REF
)
6280 rtx symbol
= XEXP (XEXP (call
, 0), 0);
6281 if (SYMBOL_REF_DECL (symbol
))
6282 fndecl
= SYMBOL_REF_DECL (symbol
);
6284 if (fndecl
== NULL_TREE
)
6285 fndecl
= MEM_EXPR (XEXP (call
, 0));
6287 && TREE_CODE (TREE_TYPE (fndecl
)) != FUNCTION_TYPE
6288 && TREE_CODE (TREE_TYPE (fndecl
)) != METHOD_TYPE
)
6290 if (fndecl
&& TYPE_ARG_TYPES (TREE_TYPE (fndecl
)))
6291 type
= TREE_TYPE (fndecl
);
6292 if (fndecl
&& TREE_CODE (fndecl
) != FUNCTION_DECL
)
6294 if (TREE_CODE (fndecl
) == INDIRECT_REF
6295 && TREE_CODE (TREE_OPERAND (fndecl
, 0)) == OBJ_TYPE_REF
)
6296 obj_type_ref
= TREE_OPERAND (fndecl
, 0);
6301 for (t
= TYPE_ARG_TYPES (type
); t
&& t
!= void_list_node
;
6303 if (TREE_CODE (TREE_VALUE (t
)) == REFERENCE_TYPE
6304 && INTEGRAL_TYPE_P (TREE_TYPE (TREE_VALUE (t
))))
6306 if ((t
== NULL
|| t
== void_list_node
) && obj_type_ref
== NULL_TREE
)
6310 int nargs ATTRIBUTE_UNUSED
= list_length (TYPE_ARG_TYPES (type
));
6311 link
= CALL_INSN_FUNCTION_USAGE (insn
);
6312 #ifndef PCC_STATIC_STRUCT_RETURN
6313 if (aggregate_value_p (TREE_TYPE (type
), type
)
6314 && targetm
.calls
.struct_value_rtx (type
, 0) == 0)
6316 tree struct_addr
= build_pointer_type (TREE_TYPE (type
));
6317 function_arg_info
arg (struct_addr
, /*named=*/true);
6319 INIT_CUMULATIVE_ARGS (args_so_far_v
, type
, NULL_RTX
, fndecl
,
6321 reg
= targetm
.calls
.function_arg (args_so_far
, arg
);
6322 targetm
.calls
.function_arg_advance (args_so_far
, arg
);
6323 if (reg
== NULL_RTX
)
6325 for (; link
; link
= XEXP (link
, 1))
6326 if (GET_CODE (XEXP (link
, 0)) == USE
6327 && MEM_P (XEXP (XEXP (link
, 0), 0)))
6329 link
= XEXP (link
, 1);
6336 INIT_CUMULATIVE_ARGS (args_so_far_v
, type
, NULL_RTX
, fndecl
,
6338 if (obj_type_ref
&& TYPE_ARG_TYPES (type
) != void_list_node
)
6340 t
= TYPE_ARG_TYPES (type
);
6341 function_arg_info
arg (TREE_VALUE (t
), /*named=*/true);
6342 this_arg
= targetm
.calls
.function_arg (args_so_far
, arg
);
6343 if (this_arg
&& !REG_P (this_arg
))
6344 this_arg
= NULL_RTX
;
6345 else if (this_arg
== NULL_RTX
)
6347 for (; link
; link
= XEXP (link
, 1))
6348 if (GET_CODE (XEXP (link
, 0)) == USE
6349 && MEM_P (XEXP (XEXP (link
, 0), 0)))
6351 this_arg
= XEXP (XEXP (link
, 0), 0);
6359 t
= type
? TYPE_ARG_TYPES (type
) : NULL_TREE
;
6361 for (link
= CALL_INSN_FUNCTION_USAGE (insn
); link
; link
= XEXP (link
, 1))
6362 if (GET_CODE (XEXP (link
, 0)) == USE
)
6364 rtx item
= NULL_RTX
;
6365 x
= XEXP (XEXP (link
, 0), 0);
6366 if (GET_MODE (link
) == VOIDmode
6367 || GET_MODE (link
) == BLKmode
6368 || (GET_MODE (link
) != GET_MODE (x
)
6369 && ((GET_MODE_CLASS (GET_MODE (link
)) != MODE_INT
6370 && GET_MODE_CLASS (GET_MODE (link
)) != MODE_PARTIAL_INT
)
6371 || (GET_MODE_CLASS (GET_MODE (x
)) != MODE_INT
6372 && GET_MODE_CLASS (GET_MODE (x
)) != MODE_PARTIAL_INT
))))
6373 /* Can't do anything for these, if the original type mode
6374 isn't known or can't be converted. */;
6377 cselib_val
*val
= cselib_lookup (x
, GET_MODE (x
), 0, VOIDmode
);
6378 scalar_int_mode mode
;
6379 if (val
&& cselib_preserved_value_p (val
))
6380 item
= val
->val_rtx
;
6381 else if (is_a
<scalar_int_mode
> (GET_MODE (x
), &mode
))
6383 opt_scalar_int_mode mode_iter
;
6384 FOR_EACH_WIDER_MODE (mode_iter
, mode
)
6386 mode
= mode_iter
.require ();
6387 if (GET_MODE_BITSIZE (mode
) > BITS_PER_WORD
)
6390 rtx reg
= simplify_subreg (mode
, x
, GET_MODE (x
), 0);
6391 if (reg
== NULL_RTX
|| !REG_P (reg
))
6393 val
= cselib_lookup (reg
, mode
, 0, VOIDmode
);
6394 if (val
&& cselib_preserved_value_p (val
))
6396 item
= val
->val_rtx
;
6407 if (!frame_pointer_needed
)
6409 class adjust_mem_data amd
;
6410 amd
.mem_mode
= VOIDmode
;
6411 amd
.stack_adjust
= -VTI (bb
)->out
.stack_adjust
;
6413 mem
= simplify_replace_fn_rtx (mem
, NULL_RTX
, adjust_mems
,
6415 gcc_assert (amd
.side_effects
.is_empty ());
6417 val
= cselib_lookup (mem
, GET_MODE (mem
), 0, VOIDmode
);
6418 if (val
&& cselib_preserved_value_p (val
))
6419 item
= val
->val_rtx
;
6420 else if (GET_MODE_CLASS (GET_MODE (mem
)) != MODE_INT
6421 && GET_MODE_CLASS (GET_MODE (mem
)) != MODE_PARTIAL_INT
)
6423 /* For non-integer stack argument see also if they weren't
6424 initialized by integers. */
6425 scalar_int_mode imode
;
6426 if (int_mode_for_mode (GET_MODE (mem
)).exists (&imode
)
6427 && imode
!= GET_MODE (mem
))
6429 val
= cselib_lookup (adjust_address_nv (mem
, imode
, 0),
6430 imode
, 0, VOIDmode
);
6431 if (val
&& cselib_preserved_value_p (val
))
6432 item
= lowpart_subreg (GET_MODE (x
), val
->val_rtx
,
6440 if (GET_MODE (item
) != GET_MODE (link
))
6441 item
= lowpart_subreg (GET_MODE (link
), item
, GET_MODE (item
));
6442 if (GET_MODE (x2
) != GET_MODE (link
))
6443 x2
= lowpart_subreg (GET_MODE (link
), x2
, GET_MODE (x2
));
6444 item
= gen_rtx_CONCAT (GET_MODE (link
), x2
, item
);
6446 = gen_rtx_EXPR_LIST (VOIDmode
, item
, call_arguments
);
6448 if (t
&& t
!= void_list_node
)
6451 function_arg_info
arg (TREE_VALUE (t
), /*named=*/true);
6452 apply_pass_by_reference_rules (&args_so_far_v
, arg
);
6453 reg
= targetm
.calls
.function_arg (args_so_far
, arg
);
6454 if (TREE_CODE (arg
.type
) == REFERENCE_TYPE
6455 && INTEGRAL_TYPE_P (TREE_TYPE (arg
.type
))
6458 && GET_MODE (reg
) == arg
.mode
6459 && (GET_MODE_CLASS (arg
.mode
) == MODE_INT
6460 || GET_MODE_CLASS (arg
.mode
) == MODE_PARTIAL_INT
)
6462 && REGNO (x
) == REGNO (reg
)
6463 && GET_MODE (x
) == arg
.mode
6466 machine_mode indmode
6467 = TYPE_MODE (TREE_TYPE (arg
.type
));
6468 rtx mem
= gen_rtx_MEM (indmode
, x
);
6469 cselib_val
*val
= cselib_lookup (mem
, indmode
, 0, VOIDmode
);
6470 if (val
&& cselib_preserved_value_p (val
))
6472 item
= gen_rtx_CONCAT (indmode
, mem
, val
->val_rtx
);
6473 call_arguments
= gen_rtx_EXPR_LIST (VOIDmode
, item
,
6478 struct elt_loc_list
*l
;
6481 /* Try harder, when passing address of a constant
6482 pool integer it can be easily read back. */
6483 item
= XEXP (item
, 1);
6484 if (GET_CODE (item
) == SUBREG
)
6485 item
= SUBREG_REG (item
);
6486 gcc_assert (GET_CODE (item
) == VALUE
);
6487 val
= CSELIB_VAL_PTR (item
);
6488 for (l
= val
->locs
; l
; l
= l
->next
)
6489 if (GET_CODE (l
->loc
) == SYMBOL_REF
6490 && TREE_CONSTANT_POOL_ADDRESS_P (l
->loc
)
6491 && SYMBOL_REF_DECL (l
->loc
)
6492 && DECL_INITIAL (SYMBOL_REF_DECL (l
->loc
)))
6494 initial
= DECL_INITIAL (SYMBOL_REF_DECL (l
->loc
));
6495 if (tree_fits_shwi_p (initial
))
6497 item
= GEN_INT (tree_to_shwi (initial
));
6498 item
= gen_rtx_CONCAT (indmode
, mem
, item
);
6500 = gen_rtx_EXPR_LIST (VOIDmode
, item
,
6507 targetm
.calls
.function_arg_advance (args_so_far
, arg
);
6512 /* Add debug arguments. */
6514 && TREE_CODE (fndecl
) == FUNCTION_DECL
6515 && DECL_HAS_DEBUG_ARGS_P (fndecl
))
6517 vec
<tree
, va_gc
> **debug_args
= decl_debug_args_lookup (fndecl
);
6522 for (ix
= 0; vec_safe_iterate (*debug_args
, ix
, ¶m
); ix
+= 2)
6525 tree dtemp
= (**debug_args
)[ix
+ 1];
6526 machine_mode mode
= DECL_MODE (dtemp
);
6527 item
= gen_rtx_DEBUG_PARAMETER_REF (mode
, param
);
6528 item
= gen_rtx_CONCAT (mode
, item
, DECL_RTL_KNOWN_SET (dtemp
));
6529 call_arguments
= gen_rtx_EXPR_LIST (VOIDmode
, item
,
6535 /* Reverse call_arguments chain. */
6537 for (cur
= call_arguments
; cur
; cur
= next
)
6539 next
= XEXP (cur
, 1);
6540 XEXP (cur
, 1) = prev
;
6543 call_arguments
= prev
;
6545 x
= get_call_rtx_from (insn
);
6548 x
= XEXP (XEXP (x
, 0), 0);
6549 if (GET_CODE (x
) == SYMBOL_REF
)
6550 /* Don't record anything. */;
6551 else if (CONSTANT_P (x
))
6553 x
= gen_rtx_CONCAT (GET_MODE (x
) == VOIDmode
? Pmode
: GET_MODE (x
),
6556 = gen_rtx_EXPR_LIST (VOIDmode
, x
, call_arguments
);
6560 cselib_val
*val
= cselib_lookup (x
, GET_MODE (x
), 0, VOIDmode
);
6561 if (val
&& cselib_preserved_value_p (val
))
6563 x
= gen_rtx_CONCAT (GET_MODE (x
), pc_rtx
, val
->val_rtx
);
6565 = gen_rtx_EXPR_LIST (VOIDmode
, x
, call_arguments
);
6572 = TYPE_MODE (TREE_TYPE (OBJ_TYPE_REF_EXPR (obj_type_ref
)));
6573 rtx clobbered
= gen_rtx_MEM (mode
, this_arg
);
6575 = tree_to_shwi (OBJ_TYPE_REF_TOKEN (obj_type_ref
));
6577 clobbered
= plus_constant (mode
, clobbered
,
6578 token
* GET_MODE_SIZE (mode
));
6579 clobbered
= gen_rtx_MEM (mode
, clobbered
);
6580 x
= gen_rtx_CONCAT (mode
, gen_rtx_CLOBBER (VOIDmode
, pc_rtx
), clobbered
);
6582 = gen_rtx_EXPR_LIST (VOIDmode
, x
, call_arguments
);
6586 /* Callback for cselib_record_sets_hook, that records as micro
6587 operations uses and stores in an insn after cselib_record_sets has
6588 analyzed the sets in an insn, but before it modifies the stored
6589 values in the internal tables, unless cselib_record_sets doesn't
6590 call it directly (perhaps because we're not doing cselib in the
6591 first place, in which case sets and n_sets will be 0). */
6594 add_with_sets (rtx_insn
*insn
, struct cselib_set
*sets
, int n_sets
)
6596 basic_block bb
= BLOCK_FOR_INSN (insn
);
6598 struct count_use_info cui
;
6599 micro_operation
*mos
;
6601 cselib_hook_called
= true;
6606 cui
.n_sets
= n_sets
;
6608 n1
= VTI (bb
)->mos
.length ();
6609 cui
.store_p
= false;
6610 note_uses (&PATTERN (insn
), add_uses_1
, &cui
);
6611 n2
= VTI (bb
)->mos
.length () - 1;
6612 mos
= VTI (bb
)->mos
.address ();
6614 /* Order the MO_USEs to be before MO_USE_NO_VARs and MO_VAL_USE, and
6618 while (n1
< n2
&& mos
[n1
].type
== MO_USE
)
6620 while (n1
< n2
&& mos
[n2
].type
!= MO_USE
)
6623 std::swap (mos
[n1
], mos
[n2
]);
6626 n2
= VTI (bb
)->mos
.length () - 1;
6629 while (n1
< n2
&& mos
[n1
].type
!= MO_VAL_LOC
)
6631 while (n1
< n2
&& mos
[n2
].type
== MO_VAL_LOC
)
6634 std::swap (mos
[n1
], mos
[n2
]);
6643 mo
.u
.loc
= call_arguments
;
6644 call_arguments
= NULL_RTX
;
6646 if (dump_file
&& (dump_flags
& TDF_DETAILS
))
6647 log_op_type (PATTERN (insn
), bb
, insn
, mo
.type
, dump_file
);
6648 VTI (bb
)->mos
.safe_push (mo
);
6651 n1
= VTI (bb
)->mos
.length ();
6652 /* This will record NEXT_INSN (insn), such that we can
6653 insert notes before it without worrying about any
6654 notes that MO_USEs might emit after the insn. */
6656 note_stores (insn
, add_stores
, &cui
);
6657 n2
= VTI (bb
)->mos
.length () - 1;
6658 mos
= VTI (bb
)->mos
.address ();
6660 /* Order the MO_VAL_USEs first (note_stores does nothing
6661 on DEBUG_INSNs, so there are no MO_VAL_LOCs from this
6662 insn), then MO_CLOBBERs, then MO_SET/MO_COPY/MO_VAL_SET. */
6665 while (n1
< n2
&& mos
[n1
].type
== MO_VAL_USE
)
6667 while (n1
< n2
&& mos
[n2
].type
!= MO_VAL_USE
)
6670 std::swap (mos
[n1
], mos
[n2
]);
6673 n2
= VTI (bb
)->mos
.length () - 1;
6676 while (n1
< n2
&& mos
[n1
].type
== MO_CLOBBER
)
6678 while (n1
< n2
&& mos
[n2
].type
!= MO_CLOBBER
)
6681 std::swap (mos
[n1
], mos
[n2
]);
6685 static enum var_init_status
6686 find_src_status (dataflow_set
*in
, rtx src
)
6688 tree decl
= NULL_TREE
;
6689 enum var_init_status status
= VAR_INIT_STATUS_UNINITIALIZED
;
6691 if (! flag_var_tracking_uninit
)
6692 status
= VAR_INIT_STATUS_INITIALIZED
;
6694 if (src
&& REG_P (src
))
6695 decl
= var_debug_decl (REG_EXPR (src
));
6696 else if (src
&& MEM_P (src
))
6697 decl
= var_debug_decl (MEM_EXPR (src
));
6700 status
= get_init_value (in
, src
, dv_from_decl (decl
));
6705 /* SRC is the source of an assignment. Use SET to try to find what
6706 was ultimately assigned to SRC. Return that value if known,
6707 otherwise return SRC itself. */
6710 find_src_set_src (dataflow_set
*set
, rtx src
)
6712 tree decl
= NULL_TREE
; /* The variable being copied around. */
6713 rtx set_src
= NULL_RTX
; /* The value for "decl" stored in "src". */
6715 location_chain
*nextp
;
6719 if (src
&& REG_P (src
))
6720 decl
= var_debug_decl (REG_EXPR (src
));
6721 else if (src
&& MEM_P (src
))
6722 decl
= var_debug_decl (MEM_EXPR (src
));
6726 decl_or_value dv
= dv_from_decl (decl
);
6728 var
= shared_hash_find (set
->vars
, dv
);
6732 for (i
= 0; i
< var
->n_var_parts
&& !found
; i
++)
6733 for (nextp
= var
->var_part
[i
].loc_chain
; nextp
&& !found
;
6734 nextp
= nextp
->next
)
6735 if (rtx_equal_p (nextp
->loc
, src
))
6737 set_src
= nextp
->set_src
;
6747 /* Compute the changes of variable locations in the basic block BB. */
6750 compute_bb_dataflow (basic_block bb
)
6753 micro_operation
*mo
;
6755 dataflow_set old_out
;
6756 dataflow_set
*in
= &VTI (bb
)->in
;
6757 dataflow_set
*out
= &VTI (bb
)->out
;
6759 dataflow_set_init (&old_out
);
6760 dataflow_set_copy (&old_out
, out
);
6761 dataflow_set_copy (out
, in
);
6763 if (MAY_HAVE_DEBUG_BIND_INSNS
)
6764 local_get_addr_cache
= new hash_map
<rtx
, rtx
>;
6766 FOR_EACH_VEC_ELT (VTI (bb
)->mos
, i
, mo
)
6768 rtx_insn
*insn
= mo
->insn
;
6773 dataflow_set_clear_at_call (out
, insn
);
6778 rtx loc
= mo
->u
.loc
;
6781 var_reg_set (out
, loc
, VAR_INIT_STATUS_UNINITIALIZED
, NULL
);
6782 else if (MEM_P (loc
))
6783 var_mem_set (out
, loc
, VAR_INIT_STATUS_UNINITIALIZED
, NULL
);
6789 rtx loc
= mo
->u
.loc
;
6793 if (GET_CODE (loc
) == CONCAT
)
6795 val
= XEXP (loc
, 0);
6796 vloc
= XEXP (loc
, 1);
6804 var
= PAT_VAR_LOCATION_DECL (vloc
);
6806 clobber_variable_part (out
, NULL_RTX
,
6807 dv_from_decl (var
), 0, NULL_RTX
);
6810 if (VAL_NEEDS_RESOLUTION (loc
))
6811 val_resolve (out
, val
, PAT_VAR_LOCATION_LOC (vloc
), insn
);
6812 set_variable_part (out
, val
, dv_from_decl (var
), 0,
6813 VAR_INIT_STATUS_INITIALIZED
, NULL_RTX
,
6816 else if (!VAR_LOC_UNKNOWN_P (PAT_VAR_LOCATION_LOC (vloc
)))
6817 set_variable_part (out
, PAT_VAR_LOCATION_LOC (vloc
),
6818 dv_from_decl (var
), 0,
6819 VAR_INIT_STATUS_INITIALIZED
, NULL_RTX
,
6826 rtx loc
= mo
->u
.loc
;
6827 rtx val
, vloc
, uloc
;
6829 vloc
= uloc
= XEXP (loc
, 1);
6830 val
= XEXP (loc
, 0);
6832 if (GET_CODE (val
) == CONCAT
)
6834 uloc
= XEXP (val
, 1);
6835 val
= XEXP (val
, 0);
6838 if (VAL_NEEDS_RESOLUTION (loc
))
6839 val_resolve (out
, val
, vloc
, insn
);
6841 val_store (out
, val
, uloc
, insn
, false);
6843 if (VAL_HOLDS_TRACK_EXPR (loc
))
6845 if (GET_CODE (uloc
) == REG
)
6846 var_reg_set (out
, uloc
, VAR_INIT_STATUS_UNINITIALIZED
,
6848 else if (GET_CODE (uloc
) == MEM
)
6849 var_mem_set (out
, uloc
, VAR_INIT_STATUS_UNINITIALIZED
,
6857 rtx loc
= mo
->u
.loc
;
6858 rtx val
, vloc
, uloc
;
6862 uloc
= XEXP (vloc
, 1);
6863 val
= XEXP (vloc
, 0);
6866 if (GET_CODE (uloc
) == SET
)
6868 dstv
= SET_DEST (uloc
);
6869 srcv
= SET_SRC (uloc
);
6877 if (GET_CODE (val
) == CONCAT
)
6879 dstv
= vloc
= XEXP (val
, 1);
6880 val
= XEXP (val
, 0);
6883 if (GET_CODE (vloc
) == SET
)
6885 srcv
= SET_SRC (vloc
);
6887 gcc_assert (val
!= srcv
);
6888 gcc_assert (vloc
== uloc
|| VAL_NEEDS_RESOLUTION (loc
));
6890 dstv
= vloc
= SET_DEST (vloc
);
6892 if (VAL_NEEDS_RESOLUTION (loc
))
6893 val_resolve (out
, val
, srcv
, insn
);
6895 else if (VAL_NEEDS_RESOLUTION (loc
))
6897 gcc_assert (GET_CODE (uloc
) == SET
6898 && GET_CODE (SET_SRC (uloc
)) == REG
);
6899 val_resolve (out
, val
, SET_SRC (uloc
), insn
);
6902 if (VAL_HOLDS_TRACK_EXPR (loc
))
6904 if (VAL_EXPR_IS_CLOBBERED (loc
))
6907 var_reg_delete (out
, uloc
, true);
6908 else if (MEM_P (uloc
))
6910 gcc_assert (MEM_P (dstv
));
6911 gcc_assert (MEM_ATTRS (dstv
) == MEM_ATTRS (uloc
));
6912 var_mem_delete (out
, dstv
, true);
6917 bool copied_p
= VAL_EXPR_IS_COPIED (loc
);
6918 rtx src
= NULL
, dst
= uloc
;
6919 enum var_init_status status
= VAR_INIT_STATUS_INITIALIZED
;
6921 if (GET_CODE (uloc
) == SET
)
6923 src
= SET_SRC (uloc
);
6924 dst
= SET_DEST (uloc
);
6929 if (flag_var_tracking_uninit
)
6931 status
= find_src_status (in
, src
);
6933 if (status
== VAR_INIT_STATUS_UNKNOWN
)
6934 status
= find_src_status (out
, src
);
6937 src
= find_src_set_src (in
, src
);
6941 var_reg_delete_and_set (out
, dst
, !copied_p
,
6943 else if (MEM_P (dst
))
6945 gcc_assert (MEM_P (dstv
));
6946 gcc_assert (MEM_ATTRS (dstv
) == MEM_ATTRS (dst
));
6947 var_mem_delete_and_set (out
, dstv
, !copied_p
,
6952 else if (REG_P (uloc
))
6953 var_regno_delete (out
, REGNO (uloc
));
6954 else if (MEM_P (uloc
))
6956 gcc_checking_assert (GET_CODE (vloc
) == MEM
);
6957 gcc_checking_assert (dstv
== vloc
);
6959 clobber_overlapping_mems (out
, vloc
);
6962 val_store (out
, val
, dstv
, insn
, true);
6968 rtx loc
= mo
->u
.loc
;
6971 if (GET_CODE (loc
) == SET
)
6973 set_src
= SET_SRC (loc
);
6974 loc
= SET_DEST (loc
);
6978 var_reg_delete_and_set (out
, loc
, true, VAR_INIT_STATUS_INITIALIZED
,
6980 else if (MEM_P (loc
))
6981 var_mem_delete_and_set (out
, loc
, true, VAR_INIT_STATUS_INITIALIZED
,
6988 rtx loc
= mo
->u
.loc
;
6989 enum var_init_status src_status
;
6992 if (GET_CODE (loc
) == SET
)
6994 set_src
= SET_SRC (loc
);
6995 loc
= SET_DEST (loc
);
6998 if (! flag_var_tracking_uninit
)
6999 src_status
= VAR_INIT_STATUS_INITIALIZED
;
7002 src_status
= find_src_status (in
, set_src
);
7004 if (src_status
== VAR_INIT_STATUS_UNKNOWN
)
7005 src_status
= find_src_status (out
, set_src
);
7008 set_src
= find_src_set_src (in
, set_src
);
7011 var_reg_delete_and_set (out
, loc
, false, src_status
, set_src
);
7012 else if (MEM_P (loc
))
7013 var_mem_delete_and_set (out
, loc
, false, src_status
, set_src
);
7019 rtx loc
= mo
->u
.loc
;
7022 var_reg_delete (out
, loc
, false);
7023 else if (MEM_P (loc
))
7024 var_mem_delete (out
, loc
, false);
7030 rtx loc
= mo
->u
.loc
;
7033 var_reg_delete (out
, loc
, true);
7034 else if (MEM_P (loc
))
7035 var_mem_delete (out
, loc
, true);
7040 out
->stack_adjust
+= mo
->u
.adjust
;
7045 if (MAY_HAVE_DEBUG_BIND_INSNS
)
7047 delete local_get_addr_cache
;
7048 local_get_addr_cache
= NULL
;
7050 dataflow_set_equiv_regs (out
);
7051 shared_hash_htab (out
->vars
)
7052 ->traverse
<dataflow_set
*, canonicalize_values_mark
> (out
);
7053 shared_hash_htab (out
->vars
)
7054 ->traverse
<dataflow_set
*, canonicalize_values_star
> (out
);
7056 shared_hash_htab (out
->vars
)
7057 ->traverse
<dataflow_set
*, canonicalize_loc_order_check
> (out
);
7059 changed
= dataflow_set_different (&old_out
, out
);
7060 dataflow_set_destroy (&old_out
);
7064 /* Find the locations of variables in the whole function. */
7067 vt_find_locations (void)
7069 bb_heap_t
*worklist
= new bb_heap_t (LONG_MIN
);
7070 bb_heap_t
*pending
= new bb_heap_t (LONG_MIN
);
7071 sbitmap in_worklist
, in_pending
;
7078 int htabmax
= param_max_vartrack_size
;
7079 bool success
= true;
7080 unsigned int n_blocks_processed
= 0;
7082 timevar_push (TV_VAR_TRACKING_DATAFLOW
);
7083 /* Compute reverse completion order of depth first search of the CFG
7084 so that the data-flow runs faster. */
7085 rc_order
= XNEWVEC (int, n_basic_blocks_for_fn (cfun
) - NUM_FIXED_BLOCKS
);
7086 bb_order
= XNEWVEC (int, last_basic_block_for_fn (cfun
));
7087 auto_bitmap exit_bbs
;
7088 bitmap_set_bit (exit_bbs
, EXIT_BLOCK
);
7089 auto_vec
<std::pair
<int, int> > toplevel_scc_extents
;
7090 int n
= rev_post_order_and_mark_dfs_back_seme
7091 (cfun
, single_succ_edge (ENTRY_BLOCK_PTR_FOR_FN (cfun
)), exit_bbs
, true,
7092 rc_order
, &toplevel_scc_extents
);
7093 for (i
= 0; i
< n
; i
++)
7094 bb_order
[rc_order
[i
]] = i
;
7096 in_worklist
= sbitmap_alloc (last_basic_block_for_fn (cfun
));
7097 in_pending
= sbitmap_alloc (last_basic_block_for_fn (cfun
));
7098 bitmap_clear (in_worklist
);
7099 bitmap_clear (in_pending
);
7101 /* We're performing the dataflow iteration independently over the
7102 toplevel SCCs plus leading non-cyclic entry blocks and separately
7103 over the tail. That ensures best memory locality and the least
7104 number of visited blocks. */
7105 unsigned extent
= 0;
7106 int curr_start
= -1;
7110 curr_start
= curr_end
+ 1;
7111 if (toplevel_scc_extents
.length () <= extent
)
7114 curr_end
= toplevel_scc_extents
[extent
++].second
;
7116 for (int i
= curr_start
; i
<= curr_end
; ++i
)
7118 pending
->insert (i
, BASIC_BLOCK_FOR_FN (cfun
, rc_order
[i
]));
7119 bitmap_set_bit (in_pending
, rc_order
[i
]);
7122 while (success
&& !pending
->empty ())
7124 std::swap (worklist
, pending
);
7125 std::swap (in_worklist
, in_pending
);
7127 while (!worklist
->empty ())
7131 int oldinsz
, oldoutsz
;
7133 bb
= worklist
->extract_min ();
7134 bitmap_clear_bit (in_worklist
, bb
->index
);
7136 if (VTI (bb
)->in
.vars
)
7138 htabsz
-= (shared_hash_htab (VTI (bb
)->in
.vars
)->size ()
7139 + shared_hash_htab (VTI (bb
)->out
.vars
)->size ());
7140 oldinsz
= shared_hash_htab (VTI (bb
)->in
.vars
)->elements ();
7141 oldoutsz
= shared_hash_htab (VTI (bb
)->out
.vars
)->elements ();
7144 oldinsz
= oldoutsz
= 0;
7146 if (MAY_HAVE_DEBUG_BIND_INSNS
)
7148 dataflow_set
*in
= &VTI (bb
)->in
, *first_out
= NULL
;
7149 bool first
= true, adjust
= false;
7151 /* Calculate the IN set as the intersection of
7152 predecessor OUT sets. */
7154 dataflow_set_clear (in
);
7155 dst_can_be_shared
= true;
7157 FOR_EACH_EDGE (e
, ei
, bb
->preds
)
7158 if (!VTI (e
->src
)->flooded
)
7159 gcc_assert (bb_order
[bb
->index
]
7160 <= bb_order
[e
->src
->index
]);
7163 dataflow_set_copy (in
, &VTI (e
->src
)->out
);
7164 first_out
= &VTI (e
->src
)->out
;
7169 dataflow_set_merge (in
, &VTI (e
->src
)->out
);
7175 dataflow_post_merge_adjust (in
, &VTI (bb
)->permp
);
7178 /* Merge and merge_adjust should keep entries in
7180 shared_hash_htab (in
->vars
)
7181 ->traverse
<dataflow_set
*,
7182 canonicalize_loc_order_check
> (in
);
7184 if (dst_can_be_shared
)
7186 shared_hash_destroy (in
->vars
);
7187 in
->vars
= shared_hash_copy (first_out
->vars
);
7191 VTI (bb
)->flooded
= true;
7195 /* Calculate the IN set as union of predecessor OUT sets. */
7196 dataflow_set_clear (&VTI (bb
)->in
);
7197 FOR_EACH_EDGE (e
, ei
, bb
->preds
)
7198 dataflow_set_union (&VTI (bb
)->in
, &VTI (e
->src
)->out
);
7201 changed
= compute_bb_dataflow (bb
);
7202 n_blocks_processed
++;
7203 htabsz
+= (shared_hash_htab (VTI (bb
)->in
.vars
)->size ()
7204 + shared_hash_htab (VTI (bb
)->out
.vars
)->size ());
7206 if (htabmax
&& htabsz
> htabmax
)
7208 if (MAY_HAVE_DEBUG_BIND_INSNS
)
7209 inform (DECL_SOURCE_LOCATION (cfun
->decl
),
7210 "variable tracking size limit exceeded with "
7211 "%<-fvar-tracking-assignments%>, retrying without");
7213 inform (DECL_SOURCE_LOCATION (cfun
->decl
),
7214 "variable tracking size limit exceeded");
7221 FOR_EACH_EDGE (e
, ei
, bb
->succs
)
7223 if (e
->dest
== EXIT_BLOCK_PTR_FOR_FN (cfun
))
7226 /* Iterate to an earlier block in RPO in the next
7227 round, iterate to the same block immediately. */
7228 if (bb_order
[e
->dest
->index
] < bb_order
[bb
->index
])
7230 gcc_assert (bb_order
[e
->dest
->index
] >= curr_start
);
7231 if (!bitmap_bit_p (in_pending
, e
->dest
->index
))
7233 /* Send E->DEST to next round. */
7234 bitmap_set_bit (in_pending
, e
->dest
->index
);
7235 pending
->insert (bb_order
[e
->dest
->index
],
7239 else if (bb_order
[e
->dest
->index
] <= curr_end
7240 && !bitmap_bit_p (in_worklist
, e
->dest
->index
))
7242 /* Add E->DEST to current round or delay
7243 processing if it is in the next SCC. */
7244 bitmap_set_bit (in_worklist
, e
->dest
->index
);
7245 worklist
->insert (bb_order
[e
->dest
->index
],
7253 "BB %i: in %i (was %i), out %i (was %i), rem %i + %i, "
7254 "tsz %i\n", bb
->index
,
7255 (int)shared_hash_htab (VTI (bb
)->in
.vars
)->size (),
7257 (int)shared_hash_htab (VTI (bb
)->out
.vars
)->size (),
7259 (int)worklist
->nodes (), (int)pending
->nodes (),
7262 if (dump_file
&& (dump_flags
& TDF_DETAILS
))
7264 fprintf (dump_file
, "BB %i IN:\n", bb
->index
);
7265 dump_dataflow_set (&VTI (bb
)->in
);
7266 fprintf (dump_file
, "BB %i OUT:\n", bb
->index
);
7267 dump_dataflow_set (&VTI (bb
)->out
);
7272 while (curr_end
!= n
- 1);
7274 statistics_counter_event (cfun
, "compute_bb_dataflow times",
7275 n_blocks_processed
);
7277 if (success
&& MAY_HAVE_DEBUG_BIND_INSNS
)
7278 FOR_EACH_BB_FN (bb
, cfun
)
7279 gcc_assert (VTI (bb
)->flooded
);
7285 sbitmap_free (in_worklist
);
7286 sbitmap_free (in_pending
);
7288 timevar_pop (TV_VAR_TRACKING_DATAFLOW
);
7292 /* Print the content of the LIST to dump file. */
7295 dump_attrs_list (attrs
*list
)
7297 for (; list
; list
= list
->next
)
7299 if (dv_is_decl_p (list
->dv
))
7300 print_mem_expr (dump_file
, dv_as_decl (list
->dv
));
7302 print_rtl_single (dump_file
, dv_as_value (list
->dv
));
7303 fprintf (dump_file
, "+" HOST_WIDE_INT_PRINT_DEC
, list
->offset
);
7305 fprintf (dump_file
, "\n");
7308 /* Print the information about variable *SLOT to dump file. */
7311 dump_var_tracking_slot (variable
**slot
, void *data ATTRIBUTE_UNUSED
)
7313 variable
*var
= *slot
;
7317 /* Continue traversing the hash table. */
7321 /* Print the information about variable VAR to dump file. */
7324 dump_var (variable
*var
)
7327 location_chain
*node
;
7329 if (dv_is_decl_p (var
->dv
))
7331 const_tree decl
= dv_as_decl (var
->dv
);
7333 if (DECL_NAME (decl
))
7335 fprintf (dump_file
, " name: %s",
7336 IDENTIFIER_POINTER (DECL_NAME (decl
)));
7337 if (dump_flags
& TDF_UID
)
7338 fprintf (dump_file
, "D.%u", DECL_UID (decl
));
7340 else if (TREE_CODE (decl
) == DEBUG_EXPR_DECL
)
7341 fprintf (dump_file
, " name: D#%u", DEBUG_TEMP_UID (decl
));
7343 fprintf (dump_file
, " name: D.%u", DECL_UID (decl
));
7344 fprintf (dump_file
, "\n");
7348 fputc (' ', dump_file
);
7349 print_rtl_single (dump_file
, dv_as_value (var
->dv
));
7352 for (i
= 0; i
< var
->n_var_parts
; i
++)
7354 fprintf (dump_file
, " offset %ld\n",
7355 (long)(var
->onepart
? 0 : VAR_PART_OFFSET (var
, i
)));
7356 for (node
= var
->var_part
[i
].loc_chain
; node
; node
= node
->next
)
7358 fprintf (dump_file
, " ");
7359 if (node
->init
== VAR_INIT_STATUS_UNINITIALIZED
)
7360 fprintf (dump_file
, "[uninit]");
7361 print_rtl_single (dump_file
, node
->loc
);
7366 /* Print the information about variables from hash table VARS to dump file. */
7369 dump_vars (variable_table_type
*vars
)
7371 if (!vars
->is_empty ())
7373 fprintf (dump_file
, "Variables:\n");
7374 vars
->traverse
<void *, dump_var_tracking_slot
> (NULL
);
7378 /* Print the dataflow set SET to dump file. */
7381 dump_dataflow_set (dataflow_set
*set
)
7385 fprintf (dump_file
, "Stack adjustment: " HOST_WIDE_INT_PRINT_DEC
"\n",
7387 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
7391 fprintf (dump_file
, "Reg %d:", i
);
7392 dump_attrs_list (set
->regs
[i
]);
7395 dump_vars (shared_hash_htab (set
->vars
));
7396 fprintf (dump_file
, "\n");
7399 /* Print the IN and OUT sets for each basic block to dump file. */
7402 dump_dataflow_sets (void)
7406 FOR_EACH_BB_FN (bb
, cfun
)
7408 fprintf (dump_file
, "\nBasic block %d:\n", bb
->index
);
7409 fprintf (dump_file
, "IN:\n");
7410 dump_dataflow_set (&VTI (bb
)->in
);
7411 fprintf (dump_file
, "OUT:\n");
7412 dump_dataflow_set (&VTI (bb
)->out
);
7416 /* Return the variable for DV in dropped_values, inserting one if
7417 requested with INSERT. */
7419 static inline variable
*
7420 variable_from_dropped (decl_or_value dv
, enum insert_option insert
)
7423 variable
*empty_var
;
7424 onepart_enum onepart
;
7426 slot
= dropped_values
->find_slot_with_hash (dv
, dv_htab_hash (dv
), insert
);
7434 gcc_checking_assert (insert
== INSERT
);
7436 onepart
= dv_onepart_p (dv
);
7438 gcc_checking_assert (onepart
== ONEPART_VALUE
|| onepart
== ONEPART_DEXPR
);
7440 empty_var
= onepart_pool_allocate (onepart
);
7442 empty_var
->refcount
= 1;
7443 empty_var
->n_var_parts
= 0;
7444 empty_var
->onepart
= onepart
;
7445 empty_var
->in_changed_variables
= false;
7446 empty_var
->var_part
[0].loc_chain
= NULL
;
7447 empty_var
->var_part
[0].cur_loc
= NULL
;
7448 VAR_LOC_1PAUX (empty_var
) = NULL
;
7449 set_dv_changed (dv
, true);
7456 /* Recover the one-part aux from dropped_values. */
7458 static struct onepart_aux
*
7459 recover_dropped_1paux (variable
*var
)
7463 gcc_checking_assert (var
->onepart
);
7465 if (VAR_LOC_1PAUX (var
))
7466 return VAR_LOC_1PAUX (var
);
7468 if (var
->onepart
== ONEPART_VDECL
)
7471 dvar
= variable_from_dropped (var
->dv
, NO_INSERT
);
7476 VAR_LOC_1PAUX (var
) = VAR_LOC_1PAUX (dvar
);
7477 VAR_LOC_1PAUX (dvar
) = NULL
;
7479 return VAR_LOC_1PAUX (var
);
7482 /* Add variable VAR to the hash table of changed variables and
7483 if it has no locations delete it from SET's hash table. */
7486 variable_was_changed (variable
*var
, dataflow_set
*set
)
7488 hashval_t hash
= dv_htab_hash (var
->dv
);
7494 /* Remember this decl or VALUE has been added to changed_variables. */
7495 set_dv_changed (var
->dv
, true);
7497 slot
= changed_variables
->find_slot_with_hash (var
->dv
, hash
, INSERT
);
7501 variable
*old_var
= *slot
;
7502 gcc_assert (old_var
->in_changed_variables
);
7503 old_var
->in_changed_variables
= false;
7504 if (var
!= old_var
&& var
->onepart
)
7506 /* Restore the auxiliary info from an empty variable
7507 previously created for changed_variables, so it is
7509 gcc_checking_assert (!VAR_LOC_1PAUX (var
));
7510 VAR_LOC_1PAUX (var
) = VAR_LOC_1PAUX (old_var
);
7511 VAR_LOC_1PAUX (old_var
) = NULL
;
7513 variable_htab_free (*slot
);
7516 if (set
&& var
->n_var_parts
== 0)
7518 onepart_enum onepart
= var
->onepart
;
7519 variable
*empty_var
= NULL
;
7520 variable
**dslot
= NULL
;
7522 if (onepart
== ONEPART_VALUE
|| onepart
== ONEPART_DEXPR
)
7524 dslot
= dropped_values
->find_slot_with_hash (var
->dv
,
7525 dv_htab_hash (var
->dv
),
7531 gcc_checking_assert (!empty_var
->in_changed_variables
);
7532 if (!VAR_LOC_1PAUX (var
))
7534 VAR_LOC_1PAUX (var
) = VAR_LOC_1PAUX (empty_var
);
7535 VAR_LOC_1PAUX (empty_var
) = NULL
;
7538 gcc_checking_assert (!VAR_LOC_1PAUX (empty_var
));
7544 empty_var
= onepart_pool_allocate (onepart
);
7545 empty_var
->dv
= var
->dv
;
7546 empty_var
->refcount
= 1;
7547 empty_var
->n_var_parts
= 0;
7548 empty_var
->onepart
= onepart
;
7551 empty_var
->refcount
++;
7556 empty_var
->refcount
++;
7557 empty_var
->in_changed_variables
= true;
7561 empty_var
->var_part
[0].loc_chain
= NULL
;
7562 empty_var
->var_part
[0].cur_loc
= NULL
;
7563 VAR_LOC_1PAUX (empty_var
) = VAR_LOC_1PAUX (var
);
7564 VAR_LOC_1PAUX (var
) = NULL
;
7570 if (var
->onepart
&& !VAR_LOC_1PAUX (var
))
7571 recover_dropped_1paux (var
);
7573 var
->in_changed_variables
= true;
7580 if (var
->n_var_parts
== 0)
7585 slot
= shared_hash_find_slot_noinsert (set
->vars
, var
->dv
);
7588 if (shared_hash_shared (set
->vars
))
7589 slot
= shared_hash_find_slot_unshare (&set
->vars
, var
->dv
,
7591 shared_hash_htab (set
->vars
)->clear_slot (slot
);
7597 /* Look for the index in VAR->var_part corresponding to OFFSET.
7598 Return -1 if not found. If INSERTION_POINT is non-NULL, the
7599 referenced int will be set to the index that the part has or should
7600 have, if it should be inserted. */
7603 find_variable_location_part (variable
*var
, HOST_WIDE_INT offset
,
7604 int *insertion_point
)
7613 if (insertion_point
)
7614 *insertion_point
= 0;
7616 return var
->n_var_parts
- 1;
7619 /* Find the location part. */
7621 high
= var
->n_var_parts
;
7624 pos
= (low
+ high
) / 2;
7625 if (VAR_PART_OFFSET (var
, pos
) < offset
)
7632 if (insertion_point
)
7633 *insertion_point
= pos
;
7635 if (pos
< var
->n_var_parts
&& VAR_PART_OFFSET (var
, pos
) == offset
)
7642 set_slot_part (dataflow_set
*set
, rtx loc
, variable
**slot
,
7643 decl_or_value dv
, HOST_WIDE_INT offset
,
7644 enum var_init_status initialized
, rtx set_src
)
7647 location_chain
*node
, *next
;
7648 location_chain
**nextp
;
7650 onepart_enum onepart
;
7655 onepart
= var
->onepart
;
7657 onepart
= dv_onepart_p (dv
);
7659 gcc_checking_assert (offset
== 0 || !onepart
);
7660 gcc_checking_assert (loc
!= dv_as_opaque (dv
));
7662 if (! flag_var_tracking_uninit
)
7663 initialized
= VAR_INIT_STATUS_INITIALIZED
;
7667 /* Create new variable information. */
7668 var
= onepart_pool_allocate (onepart
);
7671 var
->n_var_parts
= 1;
7672 var
->onepart
= onepart
;
7673 var
->in_changed_variables
= false;
7675 VAR_LOC_1PAUX (var
) = NULL
;
7677 VAR_PART_OFFSET (var
, 0) = offset
;
7678 var
->var_part
[0].loc_chain
= NULL
;
7679 var
->var_part
[0].cur_loc
= NULL
;
7682 nextp
= &var
->var_part
[0].loc_chain
;
7688 gcc_assert (dv_as_opaque (var
->dv
) == dv_as_opaque (dv
));
7692 if (GET_CODE (loc
) == VALUE
)
7694 for (nextp
= &var
->var_part
[0].loc_chain
; (node
= *nextp
);
7695 nextp
= &node
->next
)
7696 if (GET_CODE (node
->loc
) == VALUE
)
7698 if (node
->loc
== loc
)
7703 if (canon_value_cmp (node
->loc
, loc
))
7711 else if (REG_P (node
->loc
) || MEM_P (node
->loc
))
7719 else if (REG_P (loc
))
7721 for (nextp
= &var
->var_part
[0].loc_chain
; (node
= *nextp
);
7722 nextp
= &node
->next
)
7723 if (REG_P (node
->loc
))
7725 if (REGNO (node
->loc
) < REGNO (loc
))
7729 if (REGNO (node
->loc
) == REGNO (loc
))
7742 else if (MEM_P (loc
))
7744 for (nextp
= &var
->var_part
[0].loc_chain
; (node
= *nextp
);
7745 nextp
= &node
->next
)
7746 if (REG_P (node
->loc
))
7748 else if (MEM_P (node
->loc
))
7750 if ((r
= loc_cmp (XEXP (node
->loc
, 0), XEXP (loc
, 0))) >= 0)
7762 for (nextp
= &var
->var_part
[0].loc_chain
; (node
= *nextp
);
7763 nextp
= &node
->next
)
7764 if ((r
= loc_cmp (node
->loc
, loc
)) >= 0)
7772 if (shared_var_p (var
, set
->vars
))
7774 slot
= unshare_variable (set
, slot
, var
, initialized
);
7776 for (nextp
= &var
->var_part
[0].loc_chain
; c
;
7777 nextp
= &(*nextp
)->next
)
7779 gcc_assert ((!node
&& !*nextp
) || node
->loc
== (*nextp
)->loc
);
7786 gcc_assert (dv_as_decl (var
->dv
) == dv_as_decl (dv
));
7788 pos
= find_variable_location_part (var
, offset
, &inspos
);
7792 node
= var
->var_part
[pos
].loc_chain
;
7795 && ((REG_P (node
->loc
) && REG_P (loc
)
7796 && REGNO (node
->loc
) == REGNO (loc
))
7797 || rtx_equal_p (node
->loc
, loc
)))
7799 /* LOC is in the beginning of the chain so we have nothing
7801 if (node
->init
< initialized
)
7802 node
->init
= initialized
;
7803 if (set_src
!= NULL
)
7804 node
->set_src
= set_src
;
7810 /* We have to make a copy of a shared variable. */
7811 if (shared_var_p (var
, set
->vars
))
7813 slot
= unshare_variable (set
, slot
, var
, initialized
);
7820 /* We have not found the location part, new one will be created. */
7822 /* We have to make a copy of the shared variable. */
7823 if (shared_var_p (var
, set
->vars
))
7825 slot
= unshare_variable (set
, slot
, var
, initialized
);
7829 /* We track only variables whose size is <= MAX_VAR_PARTS bytes
7830 thus there are at most MAX_VAR_PARTS different offsets. */
7831 gcc_assert (var
->n_var_parts
< MAX_VAR_PARTS
7832 && (!var
->n_var_parts
|| !onepart
));
7834 /* We have to move the elements of array starting at index
7835 inspos to the next position. */
7836 for (pos
= var
->n_var_parts
; pos
> inspos
; pos
--)
7837 var
->var_part
[pos
] = var
->var_part
[pos
- 1];
7840 gcc_checking_assert (!onepart
);
7841 VAR_PART_OFFSET (var
, pos
) = offset
;
7842 var
->var_part
[pos
].loc_chain
= NULL
;
7843 var
->var_part
[pos
].cur_loc
= NULL
;
7846 /* Delete the location from the list. */
7847 nextp
= &var
->var_part
[pos
].loc_chain
;
7848 for (node
= var
->var_part
[pos
].loc_chain
; node
; node
= next
)
7851 if ((REG_P (node
->loc
) && REG_P (loc
)
7852 && REGNO (node
->loc
) == REGNO (loc
))
7853 || rtx_equal_p (node
->loc
, loc
))
7855 /* Save these values, to assign to the new node, before
7856 deleting this one. */
7857 if (node
->init
> initialized
)
7858 initialized
= node
->init
;
7859 if (node
->set_src
!= NULL
&& set_src
== NULL
)
7860 set_src
= node
->set_src
;
7861 if (var
->var_part
[pos
].cur_loc
== node
->loc
)
7862 var
->var_part
[pos
].cur_loc
= NULL
;
7868 nextp
= &node
->next
;
7871 nextp
= &var
->var_part
[pos
].loc_chain
;
7874 /* Add the location to the beginning. */
7875 node
= new location_chain
;
7877 node
->init
= initialized
;
7878 node
->set_src
= set_src
;
7879 node
->next
= *nextp
;
7882 /* If no location was emitted do so. */
7883 if (var
->var_part
[pos
].cur_loc
== NULL
)
7884 variable_was_changed (var
, set
);
7889 /* Set the part of variable's location in the dataflow set SET. The
7890 variable part is specified by variable's declaration in DV and
7891 offset OFFSET and the part's location by LOC. IOPT should be
7892 NO_INSERT if the variable is known to be in SET already and the
7893 variable hash table must not be resized, and INSERT otherwise. */
7896 set_variable_part (dataflow_set
*set
, rtx loc
,
7897 decl_or_value dv
, HOST_WIDE_INT offset
,
7898 enum var_init_status initialized
, rtx set_src
,
7899 enum insert_option iopt
)
7903 if (iopt
== NO_INSERT
)
7904 slot
= shared_hash_find_slot_noinsert (set
->vars
, dv
);
7907 slot
= shared_hash_find_slot (set
->vars
, dv
);
7909 slot
= shared_hash_find_slot_unshare (&set
->vars
, dv
, iopt
);
7911 set_slot_part (set
, loc
, slot
, dv
, offset
, initialized
, set_src
);
7914 /* Remove all recorded register locations for the given variable part
7915 from dataflow set SET, except for those that are identical to loc.
7916 The variable part is specified by variable's declaration or value
7917 DV and offset OFFSET. */
7920 clobber_slot_part (dataflow_set
*set
, rtx loc
, variable
**slot
,
7921 HOST_WIDE_INT offset
, rtx set_src
)
7923 variable
*var
= *slot
;
7924 int pos
= find_variable_location_part (var
, offset
, NULL
);
7928 location_chain
*node
, *next
;
7930 /* Remove the register locations from the dataflow set. */
7931 next
= var
->var_part
[pos
].loc_chain
;
7932 for (node
= next
; node
; node
= next
)
7935 if (node
->loc
!= loc
7936 && (!flag_var_tracking_uninit
7939 || !rtx_equal_p (set_src
, node
->set_src
)))
7941 if (REG_P (node
->loc
))
7943 attrs
*anode
, *anext
;
7946 /* Remove the variable part from the register's
7947 list, but preserve any other variable parts
7948 that might be regarded as live in that same
7950 anextp
= &set
->regs
[REGNO (node
->loc
)];
7951 for (anode
= *anextp
; anode
; anode
= anext
)
7953 anext
= anode
->next
;
7954 if (dv_as_opaque (anode
->dv
) == dv_as_opaque (var
->dv
)
7955 && anode
->offset
== offset
)
7961 anextp
= &anode
->next
;
7965 slot
= delete_slot_part (set
, node
->loc
, slot
, offset
);
7973 /* Remove all recorded register locations for the given variable part
7974 from dataflow set SET, except for those that are identical to loc.
7975 The variable part is specified by variable's declaration or value
7976 DV and offset OFFSET. */
7979 clobber_variable_part (dataflow_set
*set
, rtx loc
, decl_or_value dv
,
7980 HOST_WIDE_INT offset
, rtx set_src
)
7984 if (!dv_as_opaque (dv
)
7985 || (!dv_is_value_p (dv
) && ! DECL_P (dv_as_decl (dv
))))
7988 slot
= shared_hash_find_slot_noinsert (set
->vars
, dv
);
7992 clobber_slot_part (set
, loc
, slot
, offset
, set_src
);
7995 /* Delete the part of variable's location from dataflow set SET. The
7996 variable part is specified by its SET->vars slot SLOT and offset
7997 OFFSET and the part's location by LOC. */
8000 delete_slot_part (dataflow_set
*set
, rtx loc
, variable
**slot
,
8001 HOST_WIDE_INT offset
)
8003 variable
*var
= *slot
;
8004 int pos
= find_variable_location_part (var
, offset
, NULL
);
8008 location_chain
*node
, *next
;
8009 location_chain
**nextp
;
8013 if (shared_var_p (var
, set
->vars
))
8015 /* If the variable contains the location part we have to
8016 make a copy of the variable. */
8017 for (node
= var
->var_part
[pos
].loc_chain
; node
;
8020 if ((REG_P (node
->loc
) && REG_P (loc
)
8021 && REGNO (node
->loc
) == REGNO (loc
))
8022 || rtx_equal_p (node
->loc
, loc
))
8024 slot
= unshare_variable (set
, slot
, var
,
8025 VAR_INIT_STATUS_UNKNOWN
);
8032 if (pos
== 0 && var
->onepart
&& VAR_LOC_1PAUX (var
))
8033 cur_loc
= VAR_LOC_FROM (var
);
8035 cur_loc
= var
->var_part
[pos
].cur_loc
;
8037 /* Delete the location part. */
8039 nextp
= &var
->var_part
[pos
].loc_chain
;
8040 for (node
= *nextp
; node
; node
= next
)
8043 if ((REG_P (node
->loc
) && REG_P (loc
)
8044 && REGNO (node
->loc
) == REGNO (loc
))
8045 || rtx_equal_p (node
->loc
, loc
))
8047 /* If we have deleted the location which was last emitted
8048 we have to emit new location so add the variable to set
8049 of changed variables. */
8050 if (cur_loc
== node
->loc
)
8053 var
->var_part
[pos
].cur_loc
= NULL
;
8054 if (pos
== 0 && var
->onepart
&& VAR_LOC_1PAUX (var
))
8055 VAR_LOC_FROM (var
) = NULL
;
8062 nextp
= &node
->next
;
8065 if (var
->var_part
[pos
].loc_chain
== NULL
)
8069 while (pos
< var
->n_var_parts
)
8071 var
->var_part
[pos
] = var
->var_part
[pos
+ 1];
8076 variable_was_changed (var
, set
);
8082 /* Delete the part of variable's location from dataflow set SET. The
8083 variable part is specified by variable's declaration or value DV
8084 and offset OFFSET and the part's location by LOC. */
8087 delete_variable_part (dataflow_set
*set
, rtx loc
, decl_or_value dv
,
8088 HOST_WIDE_INT offset
)
8090 variable
**slot
= shared_hash_find_slot_noinsert (set
->vars
, dv
);
8094 delete_slot_part (set
, loc
, slot
, offset
);
8098 /* Structure for passing some other parameters to function
8099 vt_expand_loc_callback. */
8100 class expand_loc_callback_data
8103 /* The variables and values active at this point. */
8104 variable_table_type
*vars
;
8106 /* Stack of values and debug_exprs under expansion, and their
8108 auto_vec
<rtx
, 4> expanding
;
8110 /* Stack of values and debug_exprs whose expansion hit recursion
8111 cycles. They will have VALUE_RECURSED_INTO marked when added to
8112 this list. This flag will be cleared if any of its dependencies
8113 resolves to a valid location. So, if the flag remains set at the
8114 end of the search, we know no valid location for this one can
8116 auto_vec
<rtx
, 4> pending
;
8118 /* The maximum depth among the sub-expressions under expansion.
8119 Zero indicates no expansion so far. */
8123 /* Allocate the one-part auxiliary data structure for VAR, with enough
8124 room for COUNT dependencies. */
8127 loc_exp_dep_alloc (variable
*var
, int count
)
8131 gcc_checking_assert (var
->onepart
);
8133 /* We can be called with COUNT == 0 to allocate the data structure
8134 without any dependencies, e.g. for the backlinks only. However,
8135 if we are specifying a COUNT, then the dependency list must have
8136 been emptied before. It would be possible to adjust pointers or
8137 force it empty here, but this is better done at an earlier point
8138 in the algorithm, so we instead leave an assertion to catch
8140 gcc_checking_assert (!count
8141 || VAR_LOC_DEP_VEC (var
) == NULL
8142 || VAR_LOC_DEP_VEC (var
)->is_empty ());
8144 if (VAR_LOC_1PAUX (var
) && VAR_LOC_DEP_VEC (var
)->space (count
))
8147 allocsize
= offsetof (struct onepart_aux
, deps
)
8148 + deps_vec::embedded_size (count
);
8150 if (VAR_LOC_1PAUX (var
))
8152 VAR_LOC_1PAUX (var
) = XRESIZEVAR (struct onepart_aux
,
8153 VAR_LOC_1PAUX (var
), allocsize
);
8154 /* If the reallocation moves the onepaux structure, the
8155 back-pointer to BACKLINKS in the first list member will still
8156 point to its old location. Adjust it. */
8157 if (VAR_LOC_DEP_LST (var
))
8158 VAR_LOC_DEP_LST (var
)->pprev
= VAR_LOC_DEP_LSTP (var
);
8162 VAR_LOC_1PAUX (var
) = XNEWVAR (struct onepart_aux
, allocsize
);
8163 *VAR_LOC_DEP_LSTP (var
) = NULL
;
8164 VAR_LOC_FROM (var
) = NULL
;
8165 VAR_LOC_DEPTH (var
).complexity
= 0;
8166 VAR_LOC_DEPTH (var
).entryvals
= 0;
8168 VAR_LOC_DEP_VEC (var
)->embedded_init (count
);
8171 /* Remove all entries from the vector of active dependencies of VAR,
8172 removing them from the back-links lists too. */
8175 loc_exp_dep_clear (variable
*var
)
8177 while (VAR_LOC_DEP_VEC (var
) && !VAR_LOC_DEP_VEC (var
)->is_empty ())
8179 loc_exp_dep
*led
= &VAR_LOC_DEP_VEC (var
)->last ();
8181 led
->next
->pprev
= led
->pprev
;
8183 *led
->pprev
= led
->next
;
8184 VAR_LOC_DEP_VEC (var
)->pop ();
8188 /* Insert an active dependency from VAR on X to the vector of
8189 dependencies, and add the corresponding back-link to X's list of
8190 back-links in VARS. */
8193 loc_exp_insert_dep (variable
*var
, rtx x
, variable_table_type
*vars
)
8199 dv
= dv_from_rtx (x
);
8201 /* ??? Build a vector of variables parallel to EXPANDING, to avoid
8202 an additional look up? */
8203 xvar
= vars
->find_with_hash (dv
, dv_htab_hash (dv
));
8207 xvar
= variable_from_dropped (dv
, NO_INSERT
);
8208 gcc_checking_assert (xvar
);
8211 /* No point in adding the same backlink more than once. This may
8212 arise if say the same value appears in two complex expressions in
8213 the same loc_list, or even more than once in a single
8215 if (VAR_LOC_DEP_LST (xvar
) && VAR_LOC_DEP_LST (xvar
)->dv
== var
->dv
)
8218 if (var
->onepart
== NOT_ONEPART
)
8219 led
= new loc_exp_dep
;
8223 memset (&empty
, 0, sizeof (empty
));
8224 VAR_LOC_DEP_VEC (var
)->quick_push (empty
);
8225 led
= &VAR_LOC_DEP_VEC (var
)->last ();
8230 loc_exp_dep_alloc (xvar
, 0);
8231 led
->pprev
= VAR_LOC_DEP_LSTP (xvar
);
8232 led
->next
= *led
->pprev
;
8234 led
->next
->pprev
= &led
->next
;
8238 /* Create active dependencies of VAR on COUNT values starting at
8239 VALUE, and corresponding back-links to the entries in VARS. Return
8240 true if we found any pending-recursion results. */
8243 loc_exp_dep_set (variable
*var
, rtx result
, rtx
*value
, int count
,
8244 variable_table_type
*vars
)
8246 bool pending_recursion
= false;
8248 gcc_checking_assert (VAR_LOC_DEP_VEC (var
) == NULL
8249 || VAR_LOC_DEP_VEC (var
)->is_empty ());
8251 /* Set up all dependencies from last_child (as set up at the end of
8252 the loop above) to the end. */
8253 loc_exp_dep_alloc (var
, count
);
8259 if (!pending_recursion
)
8260 pending_recursion
= !result
&& VALUE_RECURSED_INTO (x
);
8262 loc_exp_insert_dep (var
, x
, vars
);
8265 return pending_recursion
;
8268 /* Notify the back-links of IVAR that are pending recursion that we
8269 have found a non-NIL value for it, so they are cleared for another
8270 attempt to compute a current location. */
8273 notify_dependents_of_resolved_value (variable
*ivar
, variable_table_type
*vars
)
8275 loc_exp_dep
*led
, *next
;
8277 for (led
= VAR_LOC_DEP_LST (ivar
); led
; led
= next
)
8279 decl_or_value dv
= led
->dv
;
8284 if (dv_is_value_p (dv
))
8286 rtx value
= dv_as_value (dv
);
8288 /* If we have already resolved it, leave it alone. */
8289 if (!VALUE_RECURSED_INTO (value
))
8292 /* Check that VALUE_RECURSED_INTO, true from the test above,
8293 implies NO_LOC_P. */
8294 gcc_checking_assert (NO_LOC_P (value
));
8296 /* We won't notify variables that are being expanded,
8297 because their dependency list is cleared before
8299 NO_LOC_P (value
) = false;
8300 VALUE_RECURSED_INTO (value
) = false;
8302 gcc_checking_assert (dv_changed_p (dv
));
8306 gcc_checking_assert (dv_onepart_p (dv
) != NOT_ONEPART
);
8307 if (!dv_changed_p (dv
))
8311 var
= vars
->find_with_hash (dv
, dv_htab_hash (dv
));
8314 var
= variable_from_dropped (dv
, NO_INSERT
);
8317 notify_dependents_of_resolved_value (var
, vars
);
8320 next
->pprev
= led
->pprev
;
8328 static rtx
vt_expand_loc_callback (rtx x
, bitmap regs
,
8329 int max_depth
, void *data
);
8331 /* Return the combined depth, when one sub-expression evaluated to
8332 BEST_DEPTH and the previous known depth was SAVED_DEPTH. */
8334 static inline expand_depth
8335 update_depth (expand_depth saved_depth
, expand_depth best_depth
)
8337 /* If we didn't find anything, stick with what we had. */
8338 if (!best_depth
.complexity
)
8341 /* If we found hadn't found anything, use the depth of the current
8342 expression. Do NOT add one extra level, we want to compute the
8343 maximum depth among sub-expressions. We'll increment it later,
8345 if (!saved_depth
.complexity
)
8348 /* Combine the entryval count so that regardless of which one we
8349 return, the entryval count is accurate. */
8350 best_depth
.entryvals
= saved_depth
.entryvals
8351 = best_depth
.entryvals
+ saved_depth
.entryvals
;
8353 if (saved_depth
.complexity
< best_depth
.complexity
)
8359 /* Expand VAR to a location RTX, updating its cur_loc. Use REGS and
8360 DATA for cselib expand callback. If PENDRECP is given, indicate in
8361 it whether any sub-expression couldn't be fully evaluated because
8362 it is pending recursion resolution. */
8365 vt_expand_var_loc_chain (variable
*var
, bitmap regs
, void *data
,
8368 class expand_loc_callback_data
*elcd
8369 = (class expand_loc_callback_data
*) data
;
8370 location_chain
*loc
, *next
;
8372 int first_child
, result_first_child
, last_child
;
8373 bool pending_recursion
;
8374 rtx loc_from
= NULL
;
8375 struct elt_loc_list
*cloc
= NULL
;
8376 expand_depth depth
= { 0, 0 }, saved_depth
= elcd
->depth
;
8377 int wanted_entryvals
, found_entryvals
= 0;
8379 /* Clear all backlinks pointing at this, so that we're not notified
8380 while we're active. */
8381 loc_exp_dep_clear (var
);
8384 if (var
->onepart
== ONEPART_VALUE
)
8386 cselib_val
*val
= CSELIB_VAL_PTR (dv_as_value (var
->dv
));
8388 gcc_checking_assert (cselib_preserved_value_p (val
));
8393 first_child
= result_first_child
= last_child
8394 = elcd
->expanding
.length ();
8396 wanted_entryvals
= found_entryvals
;
8398 /* Attempt to expand each available location in turn. */
8399 for (next
= loc
= var
->n_var_parts
? var
->var_part
[0].loc_chain
: NULL
;
8400 loc
|| cloc
; loc
= next
)
8402 result_first_child
= last_child
;
8406 loc_from
= cloc
->loc
;
8409 if (unsuitable_loc (loc_from
))
8414 loc_from
= loc
->loc
;
8418 gcc_checking_assert (!unsuitable_loc (loc_from
));
8420 elcd
->depth
.complexity
= elcd
->depth
.entryvals
= 0;
8421 result
= cselib_expand_value_rtx_cb (loc_from
, regs
, EXPR_DEPTH
,
8422 vt_expand_loc_callback
, data
);
8423 last_child
= elcd
->expanding
.length ();
8427 depth
= elcd
->depth
;
8429 gcc_checking_assert (depth
.complexity
8430 || result_first_child
== last_child
);
8432 if (last_child
- result_first_child
!= 1)
8434 if (!depth
.complexity
&& GET_CODE (result
) == ENTRY_VALUE
)
8439 if (depth
.complexity
<= EXPR_USE_DEPTH
)
8441 if (depth
.entryvals
<= wanted_entryvals
)
8443 else if (!found_entryvals
|| depth
.entryvals
< found_entryvals
)
8444 found_entryvals
= depth
.entryvals
;
8450 /* Set it up in case we leave the loop. */
8451 depth
.complexity
= depth
.entryvals
= 0;
8453 result_first_child
= first_child
;
8456 if (!loc_from
&& wanted_entryvals
< found_entryvals
)
8458 /* We found entries with ENTRY_VALUEs and skipped them. Since
8459 we could not find any expansions without ENTRY_VALUEs, but we
8460 found at least one with them, go back and get an entry with
8461 the minimum number ENTRY_VALUE count that we found. We could
8462 avoid looping, but since each sub-loc is already resolved,
8463 the re-expansion should be trivial. ??? Should we record all
8464 attempted locs as dependencies, so that we retry the
8465 expansion should any of them change, in the hope it can give
8466 us a new entry without an ENTRY_VALUE? */
8467 elcd
->expanding
.truncate (first_child
);
8471 /* Register all encountered dependencies as active. */
8472 pending_recursion
= loc_exp_dep_set
8473 (var
, result
, elcd
->expanding
.address () + result_first_child
,
8474 last_child
- result_first_child
, elcd
->vars
);
8476 elcd
->expanding
.truncate (first_child
);
8478 /* Record where the expansion came from. */
8479 gcc_checking_assert (!result
|| !pending_recursion
);
8480 VAR_LOC_FROM (var
) = loc_from
;
8481 VAR_LOC_DEPTH (var
) = depth
;
8483 gcc_checking_assert (!depth
.complexity
== !result
);
8485 elcd
->depth
= update_depth (saved_depth
, depth
);
8487 /* Indicate whether any of the dependencies are pending recursion
8490 *pendrecp
= pending_recursion
;
8492 if (!pendrecp
|| !pending_recursion
)
8493 var
->var_part
[0].cur_loc
= result
;
8498 /* Callback for cselib_expand_value, that looks for expressions
8499 holding the value in the var-tracking hash tables. Return X for
8500 standard processing, anything else is to be used as-is. */
8503 vt_expand_loc_callback (rtx x
, bitmap regs
,
8504 int max_depth ATTRIBUTE_UNUSED
,
8507 class expand_loc_callback_data
*elcd
8508 = (class expand_loc_callback_data
*) data
;
8512 bool pending_recursion
= false;
8513 bool from_empty
= false;
8515 switch (GET_CODE (x
))
8518 subreg
= cselib_expand_value_rtx_cb (SUBREG_REG (x
), regs
,
8520 vt_expand_loc_callback
, data
);
8525 result
= simplify_gen_subreg (GET_MODE (x
), subreg
,
8526 GET_MODE (SUBREG_REG (x
)),
8529 /* Invalid SUBREGs are ok in debug info. ??? We could try
8530 alternate expansions for the VALUE as well. */
8531 if (!result
&& GET_MODE (subreg
) != VOIDmode
)
8532 result
= gen_rtx_raw_SUBREG (GET_MODE (x
), subreg
, SUBREG_BYTE (x
));
8538 dv
= dv_from_rtx (x
);
8545 elcd
->expanding
.safe_push (x
);
8547 /* Check that VALUE_RECURSED_INTO implies NO_LOC_P. */
8548 gcc_checking_assert (!VALUE_RECURSED_INTO (x
) || NO_LOC_P (x
));
8552 gcc_checking_assert (VALUE_RECURSED_INTO (x
) || !dv_changed_p (dv
));
8556 var
= elcd
->vars
->find_with_hash (dv
, dv_htab_hash (dv
));
8561 var
= variable_from_dropped (dv
, INSERT
);
8564 gcc_checking_assert (var
);
8566 if (!dv_changed_p (dv
))
8568 gcc_checking_assert (!NO_LOC_P (x
));
8569 gcc_checking_assert (var
->var_part
[0].cur_loc
);
8570 gcc_checking_assert (VAR_LOC_1PAUX (var
));
8571 gcc_checking_assert (VAR_LOC_1PAUX (var
)->depth
.complexity
);
8573 elcd
->depth
= update_depth (elcd
->depth
, VAR_LOC_1PAUX (var
)->depth
);
8575 return var
->var_part
[0].cur_loc
;
8578 VALUE_RECURSED_INTO (x
) = true;
8579 /* This is tentative, but it makes some tests simpler. */
8580 NO_LOC_P (x
) = true;
8582 gcc_checking_assert (var
->n_var_parts
== 1 || from_empty
);
8584 result
= vt_expand_var_loc_chain (var
, regs
, data
, &pending_recursion
);
8586 if (pending_recursion
)
8588 gcc_checking_assert (!result
);
8589 elcd
->pending
.safe_push (x
);
8593 NO_LOC_P (x
) = !result
;
8594 VALUE_RECURSED_INTO (x
) = false;
8595 set_dv_changed (dv
, false);
8598 notify_dependents_of_resolved_value (var
, elcd
->vars
);
8604 /* While expanding variables, we may encounter recursion cycles
8605 because of mutual (possibly indirect) dependencies between two
8606 particular variables (or values), say A and B. If we're trying to
8607 expand A when we get to B, which in turn attempts to expand A, if
8608 we can't find any other expansion for B, we'll add B to this
8609 pending-recursion stack, and tentatively return NULL for its
8610 location. This tentative value will be used for any other
8611 occurrences of B, unless A gets some other location, in which case
8612 it will notify B that it is worth another try at computing a
8613 location for it, and it will use the location computed for A then.
8614 At the end of the expansion, the tentative NULL locations become
8615 final for all members of PENDING that didn't get a notification.
8616 This function performs this finalization of NULL locations. */
8619 resolve_expansions_pending_recursion (vec
<rtx
, va_heap
> *pending
)
8621 while (!pending
->is_empty ())
8623 rtx x
= pending
->pop ();
8626 if (!VALUE_RECURSED_INTO (x
))
8629 gcc_checking_assert (NO_LOC_P (x
));
8630 VALUE_RECURSED_INTO (x
) = false;
8631 dv
= dv_from_rtx (x
);
8632 gcc_checking_assert (dv_changed_p (dv
));
8633 set_dv_changed (dv
, false);
8637 /* Initialize expand_loc_callback_data D with variable hash table V.
8638 It must be a macro because of alloca (vec stack). */
8639 #define INIT_ELCD(d, v) \
8643 (d).depth.complexity = (d).depth.entryvals = 0; \
8646 /* Finalize expand_loc_callback_data D, resolved to location L. */
8647 #define FINI_ELCD(d, l) \
8650 resolve_expansions_pending_recursion (&(d).pending); \
8651 (d).pending.release (); \
8652 (d).expanding.release (); \
8654 if ((l) && MEM_P (l)) \
8655 (l) = targetm.delegitimize_address (l); \
8659 /* Expand VALUEs and DEBUG_EXPRs in LOC to a location, using the
8660 equivalences in VARS, updating their CUR_LOCs in the process. */
8663 vt_expand_loc (rtx loc
, variable_table_type
*vars
)
8665 class expand_loc_callback_data data
;
8668 if (!MAY_HAVE_DEBUG_BIND_INSNS
)
8671 INIT_ELCD (data
, vars
);
8673 result
= cselib_expand_value_rtx_cb (loc
, scratch_regs
, EXPR_DEPTH
,
8674 vt_expand_loc_callback
, &data
);
8676 FINI_ELCD (data
, result
);
8681 /* Expand the one-part VARiable to a location, using the equivalences
8682 in VARS, updating their CUR_LOCs in the process. */
8685 vt_expand_1pvar (variable
*var
, variable_table_type
*vars
)
8687 class expand_loc_callback_data data
;
8690 gcc_checking_assert (var
->onepart
&& var
->n_var_parts
== 1);
8692 if (!dv_changed_p (var
->dv
))
8693 return var
->var_part
[0].cur_loc
;
8695 INIT_ELCD (data
, vars
);
8697 loc
= vt_expand_var_loc_chain (var
, scratch_regs
, &data
, NULL
);
8699 gcc_checking_assert (data
.expanding
.is_empty ());
8701 FINI_ELCD (data
, loc
);
8706 /* Emit the NOTE_INSN_VAR_LOCATION for variable *VARP. DATA contains
8707 additional parameters: WHERE specifies whether the note shall be emitted
8708 before or after instruction INSN. */
8711 emit_note_insn_var_location (variable
**varp
, emit_note_data
*data
)
8713 variable
*var
= *varp
;
8714 rtx_insn
*insn
= data
->insn
;
8715 enum emit_note_where where
= data
->where
;
8716 variable_table_type
*vars
= data
->vars
;
8719 int i
, j
, n_var_parts
;
8721 enum var_init_status initialized
= VAR_INIT_STATUS_UNINITIALIZED
;
8722 HOST_WIDE_INT last_limit
;
8723 HOST_WIDE_INT offsets
[MAX_VAR_PARTS
];
8724 rtx loc
[MAX_VAR_PARTS
];
8728 gcc_checking_assert (var
->onepart
== NOT_ONEPART
8729 || var
->onepart
== ONEPART_VDECL
);
8731 decl
= dv_as_decl (var
->dv
);
8737 for (i
= 0; i
< var
->n_var_parts
; i
++)
8738 if (var
->var_part
[i
].cur_loc
== NULL
&& var
->var_part
[i
].loc_chain
)
8739 var
->var_part
[i
].cur_loc
= var
->var_part
[i
].loc_chain
->loc
;
8740 for (i
= 0; i
< var
->n_var_parts
; i
++)
8742 machine_mode mode
, wider_mode
;
8744 HOST_WIDE_INT offset
, size
, wider_size
;
8746 if (i
== 0 && var
->onepart
)
8748 gcc_checking_assert (var
->n_var_parts
== 1);
8750 initialized
= VAR_INIT_STATUS_INITIALIZED
;
8751 loc2
= vt_expand_1pvar (var
, vars
);
8755 if (last_limit
< VAR_PART_OFFSET (var
, i
))
8760 else if (last_limit
> VAR_PART_OFFSET (var
, i
))
8762 offset
= VAR_PART_OFFSET (var
, i
);
8763 loc2
= var
->var_part
[i
].cur_loc
;
8764 if (loc2
&& GET_CODE (loc2
) == MEM
8765 && GET_CODE (XEXP (loc2
, 0)) == VALUE
)
8767 rtx depval
= XEXP (loc2
, 0);
8769 loc2
= vt_expand_loc (loc2
, vars
);
8772 loc_exp_insert_dep (var
, depval
, vars
);
8779 gcc_checking_assert (GET_CODE (loc2
) != VALUE
);
8780 for (lc
= var
->var_part
[i
].loc_chain
; lc
; lc
= lc
->next
)
8781 if (var
->var_part
[i
].cur_loc
== lc
->loc
)
8783 initialized
= lc
->init
;
8789 offsets
[n_var_parts
] = offset
;
8795 loc
[n_var_parts
] = loc2
;
8796 mode
= GET_MODE (var
->var_part
[i
].cur_loc
);
8797 if (mode
== VOIDmode
&& var
->onepart
)
8798 mode
= DECL_MODE (decl
);
8799 /* We ony track subparts of constant-sized objects, since at present
8800 there's no representation for polynomial pieces. */
8801 if (!GET_MODE_SIZE (mode
).is_constant (&size
))
8806 last_limit
= offsets
[n_var_parts
] + size
;
8808 /* Attempt to merge adjacent registers or memory. */
8809 for (j
= i
+ 1; j
< var
->n_var_parts
; j
++)
8810 if (last_limit
<= VAR_PART_OFFSET (var
, j
))
8812 if (j
< var
->n_var_parts
8813 && GET_MODE_WIDER_MODE (mode
).exists (&wider_mode
)
8814 && GET_MODE_SIZE (wider_mode
).is_constant (&wider_size
)
8815 && var
->var_part
[j
].cur_loc
8816 && mode
== GET_MODE (var
->var_part
[j
].cur_loc
)
8817 && (REG_P (loc
[n_var_parts
]) || MEM_P (loc
[n_var_parts
]))
8818 && last_limit
== (var
->onepart
? 0 : VAR_PART_OFFSET (var
, j
))
8819 && (loc2
= vt_expand_loc (var
->var_part
[j
].cur_loc
, vars
))
8820 && GET_CODE (loc
[n_var_parts
]) == GET_CODE (loc2
))
8825 if (REG_P (loc
[n_var_parts
])
8826 && hard_regno_nregs (REGNO (loc
[n_var_parts
]), mode
) * 2
8827 == hard_regno_nregs (REGNO (loc
[n_var_parts
]), wider_mode
)
8828 && end_hard_regno (mode
, REGNO (loc
[n_var_parts
]))
8831 if (! WORDS_BIG_ENDIAN
&& ! BYTES_BIG_ENDIAN
)
8832 new_loc
= simplify_subreg (wider_mode
, loc
[n_var_parts
],
8834 else if (WORDS_BIG_ENDIAN
&& BYTES_BIG_ENDIAN
)
8835 new_loc
= simplify_subreg (wider_mode
, loc2
, mode
, 0);
8838 if (!REG_P (new_loc
)
8839 || REGNO (new_loc
) != REGNO (loc
[n_var_parts
]))
8842 REG_ATTRS (new_loc
) = REG_ATTRS (loc
[n_var_parts
]);
8845 else if (MEM_P (loc
[n_var_parts
])
8846 && GET_CODE (XEXP (loc2
, 0)) == PLUS
8847 && REG_P (XEXP (XEXP (loc2
, 0), 0))
8848 && poly_int_rtx_p (XEXP (XEXP (loc2
, 0), 1), &offset2
))
8850 poly_int64 end1
= size
;
8851 rtx base1
= strip_offset_and_add (XEXP (loc
[n_var_parts
], 0),
8853 if (rtx_equal_p (base1
, XEXP (XEXP (loc2
, 0), 0))
8854 && known_eq (end1
, offset2
))
8855 new_loc
= adjust_address_nv (loc
[n_var_parts
],
8861 loc
[n_var_parts
] = new_loc
;
8863 last_limit
= offsets
[n_var_parts
] + wider_size
;
8869 poly_uint64 type_size_unit
8870 = tree_to_poly_uint64 (TYPE_SIZE_UNIT (TREE_TYPE (decl
)));
8871 if (maybe_lt (poly_uint64 (last_limit
), type_size_unit
))
8874 if (! flag_var_tracking_uninit
)
8875 initialized
= VAR_INIT_STATUS_INITIALIZED
;
8879 note_vl
= gen_rtx_VAR_LOCATION (VOIDmode
, decl
, NULL_RTX
, initialized
);
8880 else if (n_var_parts
== 1)
8884 if (offsets
[0] || GET_CODE (loc
[0]) == PARALLEL
)
8885 expr_list
= gen_rtx_EXPR_LIST (VOIDmode
, loc
[0], GEN_INT (offsets
[0]));
8889 note_vl
= gen_rtx_VAR_LOCATION (VOIDmode
, decl
, expr_list
, initialized
);
8891 else if (n_var_parts
)
8895 for (i
= 0; i
< n_var_parts
; i
++)
8897 = gen_rtx_EXPR_LIST (VOIDmode
, loc
[i
], GEN_INT (offsets
[i
]));
8899 parallel
= gen_rtx_PARALLEL (VOIDmode
,
8900 gen_rtvec_v (n_var_parts
, loc
));
8901 note_vl
= gen_rtx_VAR_LOCATION (VOIDmode
, decl
,
8902 parallel
, initialized
);
8905 if (where
!= EMIT_NOTE_BEFORE_INSN
)
8907 note
= emit_note_after (NOTE_INSN_VAR_LOCATION
, insn
);
8908 if (where
== EMIT_NOTE_AFTER_CALL_INSN
)
8909 NOTE_DURING_CALL_P (note
) = true;
8913 /* Make sure that the call related notes come first. */
8914 while (NEXT_INSN (insn
)
8916 && NOTE_KIND (insn
) == NOTE_INSN_VAR_LOCATION
8917 && NOTE_DURING_CALL_P (insn
))
8918 insn
= NEXT_INSN (insn
);
8920 && NOTE_KIND (insn
) == NOTE_INSN_VAR_LOCATION
8921 && NOTE_DURING_CALL_P (insn
))
8922 note
= emit_note_after (NOTE_INSN_VAR_LOCATION
, insn
);
8924 note
= emit_note_before (NOTE_INSN_VAR_LOCATION
, insn
);
8926 NOTE_VAR_LOCATION (note
) = note_vl
;
8928 set_dv_changed (var
->dv
, false);
8929 gcc_assert (var
->in_changed_variables
);
8930 var
->in_changed_variables
= false;
8931 changed_variables
->clear_slot (varp
);
8933 /* Continue traversing the hash table. */
8937 /* While traversing changed_variables, push onto DATA (a stack of RTX
8938 values) entries that aren't user variables. */
8941 var_track_values_to_stack (variable
**slot
,
8942 vec
<rtx
, va_heap
> *changed_values_stack
)
8944 variable
*var
= *slot
;
8946 if (var
->onepart
== ONEPART_VALUE
)
8947 changed_values_stack
->safe_push (dv_as_value (var
->dv
));
8948 else if (var
->onepart
== ONEPART_DEXPR
)
8949 changed_values_stack
->safe_push (DECL_RTL_KNOWN_SET (dv_as_decl (var
->dv
)));
8954 /* Remove from changed_variables the entry whose DV corresponds to
8955 value or debug_expr VAL. */
8957 remove_value_from_changed_variables (rtx val
)
8959 decl_or_value dv
= dv_from_rtx (val
);
8963 slot
= changed_variables
->find_slot_with_hash (dv
, dv_htab_hash (dv
),
8966 var
->in_changed_variables
= false;
8967 changed_variables
->clear_slot (slot
);
8970 /* If VAL (a value or debug_expr) has backlinks to variables actively
8971 dependent on it in HTAB or in CHANGED_VARIABLES, mark them as
8972 changed, adding to CHANGED_VALUES_STACK any dependencies that may
8973 have dependencies of their own to notify. */
8976 notify_dependents_of_changed_value (rtx val
, variable_table_type
*htab
,
8977 vec
<rtx
, va_heap
> *changed_values_stack
)
8982 decl_or_value dv
= dv_from_rtx (val
);
8984 slot
= changed_variables
->find_slot_with_hash (dv
, dv_htab_hash (dv
),
8987 slot
= htab
->find_slot_with_hash (dv
, dv_htab_hash (dv
), NO_INSERT
);
8989 slot
= dropped_values
->find_slot_with_hash (dv
, dv_htab_hash (dv
),
8993 while ((led
= VAR_LOC_DEP_LST (var
)))
8995 decl_or_value ldv
= led
->dv
;
8998 /* Deactivate and remove the backlink, as it was “used up”. It
8999 makes no sense to attempt to notify the same entity again:
9000 either it will be recomputed and re-register an active
9001 dependency, or it will still have the changed mark. */
9003 led
->next
->pprev
= led
->pprev
;
9005 *led
->pprev
= led
->next
;
9009 if (dv_changed_p (ldv
))
9012 switch (dv_onepart_p (ldv
))
9016 set_dv_changed (ldv
, true);
9017 changed_values_stack
->safe_push (dv_as_rtx (ldv
));
9021 ivar
= htab
->find_with_hash (ldv
, dv_htab_hash (ldv
));
9022 gcc_checking_assert (!VAR_LOC_DEP_LST (ivar
));
9023 variable_was_changed (ivar
, NULL
);
9028 ivar
= htab
->find_with_hash (ldv
, dv_htab_hash (ldv
));
9031 int i
= ivar
->n_var_parts
;
9034 rtx loc
= ivar
->var_part
[i
].cur_loc
;
9036 if (loc
&& GET_CODE (loc
) == MEM
9037 && XEXP (loc
, 0) == val
)
9039 variable_was_changed (ivar
, NULL
);
9052 /* Take out of changed_variables any entries that don't refer to use
9053 variables. Back-propagate change notifications from values and
9054 debug_exprs to their active dependencies in HTAB or in
9055 CHANGED_VARIABLES. */
9058 process_changed_values (variable_table_type
*htab
)
9062 auto_vec
<rtx
, 20> changed_values_stack
;
9064 /* Move values from changed_variables to changed_values_stack. */
9066 ->traverse
<vec
<rtx
, va_heap
>*, var_track_values_to_stack
>
9067 (&changed_values_stack
);
9069 /* Back-propagate change notifications in values while popping
9070 them from the stack. */
9071 for (n
= i
= changed_values_stack
.length ();
9072 i
> 0; i
= changed_values_stack
.length ())
9074 val
= changed_values_stack
.pop ();
9075 notify_dependents_of_changed_value (val
, htab
, &changed_values_stack
);
9077 /* This condition will hold when visiting each of the entries
9078 originally in changed_variables. We can't remove them
9079 earlier because this could drop the backlinks before we got a
9080 chance to use them. */
9083 remove_value_from_changed_variables (val
);
9089 /* Emit NOTE_INSN_VAR_LOCATION note for each variable from a chain
9090 CHANGED_VARIABLES and delete this chain. WHERE specifies whether
9091 the notes shall be emitted before of after instruction INSN. */
9094 emit_notes_for_changes (rtx_insn
*insn
, enum emit_note_where where
,
9097 emit_note_data data
;
9098 variable_table_type
*htab
= shared_hash_htab (vars
);
9100 if (changed_variables
->is_empty ())
9103 if (MAY_HAVE_DEBUG_BIND_INSNS
)
9104 process_changed_values (htab
);
9111 ->traverse
<emit_note_data
*, emit_note_insn_var_location
> (&data
);
9114 /* Add variable *SLOT to the chain CHANGED_VARIABLES if it differs from the
9115 same variable in hash table DATA or is not there at all. */
9118 emit_notes_for_differences_1 (variable
**slot
, variable_table_type
*new_vars
)
9120 variable
*old_var
, *new_var
;
9123 new_var
= new_vars
->find_with_hash (old_var
->dv
, dv_htab_hash (old_var
->dv
));
9127 /* Variable has disappeared. */
9128 variable
*empty_var
= NULL
;
9130 if (old_var
->onepart
== ONEPART_VALUE
9131 || old_var
->onepart
== ONEPART_DEXPR
)
9133 empty_var
= variable_from_dropped (old_var
->dv
, NO_INSERT
);
9136 gcc_checking_assert (!empty_var
->in_changed_variables
);
9137 if (!VAR_LOC_1PAUX (old_var
))
9139 VAR_LOC_1PAUX (old_var
) = VAR_LOC_1PAUX (empty_var
);
9140 VAR_LOC_1PAUX (empty_var
) = NULL
;
9143 gcc_checking_assert (!VAR_LOC_1PAUX (empty_var
));
9149 empty_var
= onepart_pool_allocate (old_var
->onepart
);
9150 empty_var
->dv
= old_var
->dv
;
9151 empty_var
->refcount
= 0;
9152 empty_var
->n_var_parts
= 0;
9153 empty_var
->onepart
= old_var
->onepart
;
9154 empty_var
->in_changed_variables
= false;
9157 if (empty_var
->onepart
)
9159 /* Propagate the auxiliary data to (ultimately)
9160 changed_variables. */
9161 empty_var
->var_part
[0].loc_chain
= NULL
;
9162 empty_var
->var_part
[0].cur_loc
= NULL
;
9163 VAR_LOC_1PAUX (empty_var
) = VAR_LOC_1PAUX (old_var
);
9164 VAR_LOC_1PAUX (old_var
) = NULL
;
9166 variable_was_changed (empty_var
, NULL
);
9167 /* Continue traversing the hash table. */
9170 /* Update cur_loc and one-part auxiliary data, before new_var goes
9171 through variable_was_changed. */
9172 if (old_var
!= new_var
&& new_var
->onepart
)
9174 gcc_checking_assert (VAR_LOC_1PAUX (new_var
) == NULL
);
9175 VAR_LOC_1PAUX (new_var
) = VAR_LOC_1PAUX (old_var
);
9176 VAR_LOC_1PAUX (old_var
) = NULL
;
9177 new_var
->var_part
[0].cur_loc
= old_var
->var_part
[0].cur_loc
;
9179 if (variable_different_p (old_var
, new_var
))
9180 variable_was_changed (new_var
, NULL
);
9182 /* Continue traversing the hash table. */
9186 /* Add variable *SLOT to the chain CHANGED_VARIABLES if it is not in hash
9190 emit_notes_for_differences_2 (variable
**slot
, variable_table_type
*old_vars
)
9192 variable
*old_var
, *new_var
;
9195 old_var
= old_vars
->find_with_hash (new_var
->dv
, dv_htab_hash (new_var
->dv
));
9199 for (i
= 0; i
< new_var
->n_var_parts
; i
++)
9200 new_var
->var_part
[i
].cur_loc
= NULL
;
9201 variable_was_changed (new_var
, NULL
);
9204 /* Continue traversing the hash table. */
9208 /* Emit notes before INSN for differences between dataflow sets OLD_SET and
9212 emit_notes_for_differences (rtx_insn
*insn
, dataflow_set
*old_set
,
9213 dataflow_set
*new_set
)
9215 shared_hash_htab (old_set
->vars
)
9216 ->traverse
<variable_table_type
*, emit_notes_for_differences_1
>
9217 (shared_hash_htab (new_set
->vars
));
9218 shared_hash_htab (new_set
->vars
)
9219 ->traverse
<variable_table_type
*, emit_notes_for_differences_2
>
9220 (shared_hash_htab (old_set
->vars
));
9221 emit_notes_for_changes (insn
, EMIT_NOTE_BEFORE_INSN
, new_set
->vars
);
9224 /* Return the next insn after INSN that is not a NOTE_INSN_VAR_LOCATION. */
9227 next_non_note_insn_var_location (rtx_insn
*insn
)
9231 insn
= NEXT_INSN (insn
);
9234 || NOTE_KIND (insn
) != NOTE_INSN_VAR_LOCATION
)
9241 /* Emit the notes for changes of location parts in the basic block BB. */
9244 emit_notes_in_bb (basic_block bb
, dataflow_set
*set
)
9247 micro_operation
*mo
;
9249 dataflow_set_clear (set
);
9250 dataflow_set_copy (set
, &VTI (bb
)->in
);
9252 FOR_EACH_VEC_ELT (VTI (bb
)->mos
, i
, mo
)
9254 rtx_insn
*insn
= mo
->insn
;
9255 rtx_insn
*next_insn
= next_non_note_insn_var_location (insn
);
9260 dataflow_set_clear_at_call (set
, insn
);
9261 emit_notes_for_changes (insn
, EMIT_NOTE_AFTER_CALL_INSN
, set
->vars
);
9263 rtx arguments
= mo
->u
.loc
, *p
= &arguments
;
9266 XEXP (XEXP (*p
, 0), 1)
9267 = vt_expand_loc (XEXP (XEXP (*p
, 0), 1),
9268 shared_hash_htab (set
->vars
));
9269 /* If expansion is successful, keep it in the list. */
9270 if (XEXP (XEXP (*p
, 0), 1))
9272 XEXP (XEXP (*p
, 0), 1)
9273 = copy_rtx_if_shared (XEXP (XEXP (*p
, 0), 1));
9276 /* Otherwise, if the following item is data_value for it,
9278 else if (XEXP (*p
, 1)
9279 && REG_P (XEXP (XEXP (*p
, 0), 0))
9280 && MEM_P (XEXP (XEXP (XEXP (*p
, 1), 0), 0))
9281 && REG_P (XEXP (XEXP (XEXP (XEXP (*p
, 1), 0), 0),
9283 && REGNO (XEXP (XEXP (*p
, 0), 0))
9284 == REGNO (XEXP (XEXP (XEXP (XEXP (*p
, 1), 0),
9286 *p
= XEXP (XEXP (*p
, 1), 1);
9287 /* Just drop this item. */
9291 add_reg_note (insn
, REG_CALL_ARG_LOCATION
, arguments
);
9297 rtx loc
= mo
->u
.loc
;
9300 var_reg_set (set
, loc
, VAR_INIT_STATUS_UNINITIALIZED
, NULL
);
9302 var_mem_set (set
, loc
, VAR_INIT_STATUS_UNINITIALIZED
, NULL
);
9304 emit_notes_for_changes (insn
, EMIT_NOTE_BEFORE_INSN
, set
->vars
);
9310 rtx loc
= mo
->u
.loc
;
9314 if (GET_CODE (loc
) == CONCAT
)
9316 val
= XEXP (loc
, 0);
9317 vloc
= XEXP (loc
, 1);
9325 var
= PAT_VAR_LOCATION_DECL (vloc
);
9327 clobber_variable_part (set
, NULL_RTX
,
9328 dv_from_decl (var
), 0, NULL_RTX
);
9331 if (VAL_NEEDS_RESOLUTION (loc
))
9332 val_resolve (set
, val
, PAT_VAR_LOCATION_LOC (vloc
), insn
);
9333 set_variable_part (set
, val
, dv_from_decl (var
), 0,
9334 VAR_INIT_STATUS_INITIALIZED
, NULL_RTX
,
9337 else if (!VAR_LOC_UNKNOWN_P (PAT_VAR_LOCATION_LOC (vloc
)))
9338 set_variable_part (set
, PAT_VAR_LOCATION_LOC (vloc
),
9339 dv_from_decl (var
), 0,
9340 VAR_INIT_STATUS_INITIALIZED
, NULL_RTX
,
9343 emit_notes_for_changes (insn
, EMIT_NOTE_AFTER_INSN
, set
->vars
);
9349 rtx loc
= mo
->u
.loc
;
9350 rtx val
, vloc
, uloc
;
9352 vloc
= uloc
= XEXP (loc
, 1);
9353 val
= XEXP (loc
, 0);
9355 if (GET_CODE (val
) == CONCAT
)
9357 uloc
= XEXP (val
, 1);
9358 val
= XEXP (val
, 0);
9361 if (VAL_NEEDS_RESOLUTION (loc
))
9362 val_resolve (set
, val
, vloc
, insn
);
9364 val_store (set
, val
, uloc
, insn
, false);
9366 if (VAL_HOLDS_TRACK_EXPR (loc
))
9368 if (GET_CODE (uloc
) == REG
)
9369 var_reg_set (set
, uloc
, VAR_INIT_STATUS_UNINITIALIZED
,
9371 else if (GET_CODE (uloc
) == MEM
)
9372 var_mem_set (set
, uloc
, VAR_INIT_STATUS_UNINITIALIZED
,
9376 emit_notes_for_changes (insn
, EMIT_NOTE_BEFORE_INSN
, set
->vars
);
9382 rtx loc
= mo
->u
.loc
;
9383 rtx val
, vloc
, uloc
;
9387 uloc
= XEXP (vloc
, 1);
9388 val
= XEXP (vloc
, 0);
9391 if (GET_CODE (uloc
) == SET
)
9393 dstv
= SET_DEST (uloc
);
9394 srcv
= SET_SRC (uloc
);
9402 if (GET_CODE (val
) == CONCAT
)
9404 dstv
= vloc
= XEXP (val
, 1);
9405 val
= XEXP (val
, 0);
9408 if (GET_CODE (vloc
) == SET
)
9410 srcv
= SET_SRC (vloc
);
9412 gcc_assert (val
!= srcv
);
9413 gcc_assert (vloc
== uloc
|| VAL_NEEDS_RESOLUTION (loc
));
9415 dstv
= vloc
= SET_DEST (vloc
);
9417 if (VAL_NEEDS_RESOLUTION (loc
))
9418 val_resolve (set
, val
, srcv
, insn
);
9420 else if (VAL_NEEDS_RESOLUTION (loc
))
9422 gcc_assert (GET_CODE (uloc
) == SET
9423 && GET_CODE (SET_SRC (uloc
)) == REG
);
9424 val_resolve (set
, val
, SET_SRC (uloc
), insn
);
9427 if (VAL_HOLDS_TRACK_EXPR (loc
))
9429 if (VAL_EXPR_IS_CLOBBERED (loc
))
9432 var_reg_delete (set
, uloc
, true);
9433 else if (MEM_P (uloc
))
9435 gcc_assert (MEM_P (dstv
));
9436 gcc_assert (MEM_ATTRS (dstv
) == MEM_ATTRS (uloc
));
9437 var_mem_delete (set
, dstv
, true);
9442 bool copied_p
= VAL_EXPR_IS_COPIED (loc
);
9443 rtx src
= NULL
, dst
= uloc
;
9444 enum var_init_status status
= VAR_INIT_STATUS_INITIALIZED
;
9446 if (GET_CODE (uloc
) == SET
)
9448 src
= SET_SRC (uloc
);
9449 dst
= SET_DEST (uloc
);
9454 status
= find_src_status (set
, src
);
9456 src
= find_src_set_src (set
, src
);
9460 var_reg_delete_and_set (set
, dst
, !copied_p
,
9462 else if (MEM_P (dst
))
9464 gcc_assert (MEM_P (dstv
));
9465 gcc_assert (MEM_ATTRS (dstv
) == MEM_ATTRS (dst
));
9466 var_mem_delete_and_set (set
, dstv
, !copied_p
,
9471 else if (REG_P (uloc
))
9472 var_regno_delete (set
, REGNO (uloc
));
9473 else if (MEM_P (uloc
))
9475 gcc_checking_assert (GET_CODE (vloc
) == MEM
);
9476 gcc_checking_assert (vloc
== dstv
);
9478 clobber_overlapping_mems (set
, vloc
);
9481 val_store (set
, val
, dstv
, insn
, true);
9483 emit_notes_for_changes (next_insn
, EMIT_NOTE_BEFORE_INSN
,
9490 rtx loc
= mo
->u
.loc
;
9493 if (GET_CODE (loc
) == SET
)
9495 set_src
= SET_SRC (loc
);
9496 loc
= SET_DEST (loc
);
9500 var_reg_delete_and_set (set
, loc
, true, VAR_INIT_STATUS_INITIALIZED
,
9503 var_mem_delete_and_set (set
, loc
, true, VAR_INIT_STATUS_INITIALIZED
,
9506 emit_notes_for_changes (next_insn
, EMIT_NOTE_BEFORE_INSN
,
9513 rtx loc
= mo
->u
.loc
;
9514 enum var_init_status src_status
;
9517 if (GET_CODE (loc
) == SET
)
9519 set_src
= SET_SRC (loc
);
9520 loc
= SET_DEST (loc
);
9523 src_status
= find_src_status (set
, set_src
);
9524 set_src
= find_src_set_src (set
, set_src
);
9527 var_reg_delete_and_set (set
, loc
, false, src_status
, set_src
);
9529 var_mem_delete_and_set (set
, loc
, false, src_status
, set_src
);
9531 emit_notes_for_changes (next_insn
, EMIT_NOTE_BEFORE_INSN
,
9538 rtx loc
= mo
->u
.loc
;
9541 var_reg_delete (set
, loc
, false);
9543 var_mem_delete (set
, loc
, false);
9545 emit_notes_for_changes (insn
, EMIT_NOTE_AFTER_INSN
, set
->vars
);
9551 rtx loc
= mo
->u
.loc
;
9554 var_reg_delete (set
, loc
, true);
9556 var_mem_delete (set
, loc
, true);
9558 emit_notes_for_changes (next_insn
, EMIT_NOTE_BEFORE_INSN
,
9564 set
->stack_adjust
+= mo
->u
.adjust
;
9570 /* Emit notes for the whole function. */
9573 vt_emit_notes (void)
9578 gcc_assert (changed_variables
->is_empty ());
9580 /* Free memory occupied by the out hash tables, as they aren't used
9582 FOR_EACH_BB_FN (bb
, cfun
)
9583 dataflow_set_clear (&VTI (bb
)->out
);
9585 /* Enable emitting notes by functions (mainly by set_variable_part and
9586 delete_variable_part). */
9589 if (MAY_HAVE_DEBUG_BIND_INSNS
)
9590 dropped_values
= new variable_table_type (cselib_get_next_uid () * 2);
9592 dataflow_set_init (&cur
);
9594 FOR_EACH_BB_FN (bb
, cfun
)
9596 /* Emit the notes for changes of variable locations between two
9597 subsequent basic blocks. */
9598 emit_notes_for_differences (BB_HEAD (bb
), &cur
, &VTI (bb
)->in
);
9600 if (MAY_HAVE_DEBUG_BIND_INSNS
)
9601 local_get_addr_cache
= new hash_map
<rtx
, rtx
>;
9603 /* Emit the notes for the changes in the basic block itself. */
9604 emit_notes_in_bb (bb
, &cur
);
9606 if (MAY_HAVE_DEBUG_BIND_INSNS
)
9607 delete local_get_addr_cache
;
9608 local_get_addr_cache
= NULL
;
9610 /* Free memory occupied by the in hash table, we won't need it
9612 dataflow_set_clear (&VTI (bb
)->in
);
9616 shared_hash_htab (cur
.vars
)
9617 ->traverse
<variable_table_type
*, emit_notes_for_differences_1
>
9618 (shared_hash_htab (empty_shared_hash
));
9620 dataflow_set_destroy (&cur
);
9622 if (MAY_HAVE_DEBUG_BIND_INSNS
)
9623 delete dropped_values
;
9624 dropped_values
= NULL
;
9629 /* If there is a declaration and offset associated with register/memory RTL
9630 assign declaration to *DECLP and offset to *OFFSETP, and return true. */
9633 vt_get_decl_and_offset (rtx rtl
, tree
*declp
, poly_int64
*offsetp
)
9637 if (REG_ATTRS (rtl
))
9639 *declp
= REG_EXPR (rtl
);
9640 *offsetp
= REG_OFFSET (rtl
);
9644 else if (GET_CODE (rtl
) == PARALLEL
)
9646 tree decl
= NULL_TREE
;
9647 HOST_WIDE_INT offset
= MAX_VAR_PARTS
;
9648 int len
= XVECLEN (rtl
, 0), i
;
9650 for (i
= 0; i
< len
; i
++)
9652 rtx reg
= XEXP (XVECEXP (rtl
, 0, i
), 0);
9653 if (!REG_P (reg
) || !REG_ATTRS (reg
))
9656 decl
= REG_EXPR (reg
);
9657 if (REG_EXPR (reg
) != decl
)
9659 HOST_WIDE_INT this_offset
;
9660 if (!track_offset_p (REG_OFFSET (reg
), &this_offset
))
9662 offset
= MIN (offset
, this_offset
);
9672 else if (MEM_P (rtl
))
9674 if (MEM_ATTRS (rtl
))
9676 *declp
= MEM_EXPR (rtl
);
9677 *offsetp
= int_mem_offset (rtl
);
9684 /* Record the value for the ENTRY_VALUE of RTL as a global equivalence
9688 record_entry_value (cselib_val
*val
, rtx rtl
)
9690 rtx ev
= gen_rtx_ENTRY_VALUE (GET_MODE (rtl
));
9692 ENTRY_VALUE_EXP (ev
) = rtl
;
9694 cselib_add_permanent_equiv (val
, ev
, get_insns ());
9697 /* Insert function parameter PARM in IN and OUT sets of ENTRY_BLOCK. */
9700 vt_add_function_parameter (tree parm
)
9702 rtx decl_rtl
= DECL_RTL_IF_SET (parm
);
9703 rtx incoming
= DECL_INCOMING_RTL (parm
);
9709 bool incoming_ok
= true;
9711 if (TREE_CODE (parm
) != PARM_DECL
)
9714 if (!decl_rtl
|| !incoming
)
9717 if (GET_MODE (decl_rtl
) == BLKmode
|| GET_MODE (incoming
) == BLKmode
)
9720 /* If there is a DRAP register or a pseudo in internal_arg_pointer,
9721 rewrite the incoming location of parameters passed on the stack
9722 into MEMs based on the argument pointer, so that incoming doesn't
9723 depend on a pseudo. */
9724 poly_int64 incoming_offset
= 0;
9725 if (MEM_P (incoming
)
9726 && (strip_offset (XEXP (incoming
, 0), &incoming_offset
)
9727 == crtl
->args
.internal_arg_pointer
))
9729 HOST_WIDE_INT off
= -FIRST_PARM_OFFSET (current_function_decl
);
9731 = replace_equiv_address_nv (incoming
,
9732 plus_constant (Pmode
,
9734 off
+ incoming_offset
));
9737 #ifdef HAVE_window_save
9738 /* DECL_INCOMING_RTL uses the INCOMING_REGNO of parameter registers.
9739 If the target machine has an explicit window save instruction, the
9740 actual entry value is the corresponding OUTGOING_REGNO instead. */
9741 if (HAVE_window_save
&& !crtl
->uses_only_leaf_regs
)
9743 if (REG_P (incoming
)
9744 && HARD_REGISTER_P (incoming
)
9745 && OUTGOING_REGNO (REGNO (incoming
)) != REGNO (incoming
))
9748 p
.incoming
= incoming
;
9750 = gen_rtx_REG_offset (incoming
, GET_MODE (incoming
),
9751 OUTGOING_REGNO (REGNO (incoming
)), 0);
9752 p
.outgoing
= incoming
;
9753 vec_safe_push (windowed_parm_regs
, p
);
9755 else if (GET_CODE (incoming
) == PARALLEL
)
9758 = gen_rtx_PARALLEL (VOIDmode
, rtvec_alloc (XVECLEN (incoming
, 0)));
9761 for (i
= 0; i
< XVECLEN (incoming
, 0); i
++)
9763 rtx reg
= XEXP (XVECEXP (incoming
, 0, i
), 0);
9766 reg
= gen_rtx_REG_offset (reg
, GET_MODE (reg
),
9767 OUTGOING_REGNO (REGNO (reg
)), 0);
9769 XVECEXP (outgoing
, 0, i
)
9770 = gen_rtx_EXPR_LIST (VOIDmode
, reg
,
9771 XEXP (XVECEXP (incoming
, 0, i
), 1));
9772 vec_safe_push (windowed_parm_regs
, p
);
9775 incoming
= outgoing
;
9777 else if (MEM_P (incoming
)
9778 && REG_P (XEXP (incoming
, 0))
9779 && HARD_REGISTER_P (XEXP (incoming
, 0)))
9781 rtx reg
= XEXP (incoming
, 0);
9782 if (OUTGOING_REGNO (REGNO (reg
)) != REGNO (reg
))
9786 reg
= gen_raw_REG (GET_MODE (reg
), OUTGOING_REGNO (REGNO (reg
)));
9788 vec_safe_push (windowed_parm_regs
, p
);
9789 incoming
= replace_equiv_address_nv (incoming
, reg
);
9795 if (!vt_get_decl_and_offset (incoming
, &decl
, &offset
))
9797 incoming_ok
= false;
9798 if (MEM_P (incoming
))
9800 /* This means argument is passed by invisible reference. */
9806 if (!vt_get_decl_and_offset (decl_rtl
, &decl
, &offset
))
9808 offset
+= byte_lowpart_offset (GET_MODE (incoming
),
9809 GET_MODE (decl_rtl
));
9818 /* If that DECL_RTL wasn't a pseudo that got spilled to
9819 memory, bail out. Otherwise, the spill slot sharing code
9820 will force the memory to reference spill_slot_decl (%sfp),
9821 so we don't match above. That's ok, the pseudo must have
9822 referenced the entire parameter, so just reset OFFSET. */
9823 if (decl
!= get_spill_slot_decl (false))
9828 HOST_WIDE_INT const_offset
;
9829 if (!track_loc_p (incoming
, parm
, offset
, false, &mode
, &const_offset
))
9832 out
= &VTI (ENTRY_BLOCK_PTR_FOR_FN (cfun
))->out
;
9834 dv
= dv_from_decl (parm
);
9836 if (target_for_debug_bind (parm
)
9837 /* We can't deal with these right now, because this kind of
9838 variable is single-part. ??? We could handle parallels
9839 that describe multiple locations for the same single
9840 value, but ATM we don't. */
9841 && GET_CODE (incoming
) != PARALLEL
)
9846 /* ??? We shouldn't ever hit this, but it may happen because
9847 arguments passed by invisible reference aren't dealt with
9848 above: incoming-rtl will have Pmode rather than the
9849 expected mode for the type. */
9853 lowpart
= var_lowpart (mode
, incoming
);
9857 val
= cselib_lookup_from_insn (lowpart
, mode
, true,
9858 VOIDmode
, get_insns ());
9860 /* ??? Float-typed values in memory are not handled by
9864 preserve_value (val
);
9865 set_variable_part (out
, val
->val_rtx
, dv
, const_offset
,
9866 VAR_INIT_STATUS_INITIALIZED
, NULL
, INSERT
);
9867 dv
= dv_from_value (val
->val_rtx
);
9870 if (MEM_P (incoming
))
9872 val
= cselib_lookup_from_insn (XEXP (incoming
, 0), mode
, true,
9873 VOIDmode
, get_insns ());
9876 preserve_value (val
);
9877 incoming
= replace_equiv_address_nv (incoming
, val
->val_rtx
);
9882 if (REG_P (incoming
))
9884 incoming
= var_lowpart (mode
, incoming
);
9885 gcc_assert (REGNO (incoming
) < FIRST_PSEUDO_REGISTER
);
9886 attrs_list_insert (&out
->regs
[REGNO (incoming
)], dv
, const_offset
,
9888 set_variable_part (out
, incoming
, dv
, const_offset
,
9889 VAR_INIT_STATUS_INITIALIZED
, NULL
, INSERT
);
9890 if (dv_is_value_p (dv
))
9892 record_entry_value (CSELIB_VAL_PTR (dv_as_value (dv
)), incoming
);
9893 if (TREE_CODE (TREE_TYPE (parm
)) == REFERENCE_TYPE
9894 && INTEGRAL_TYPE_P (TREE_TYPE (TREE_TYPE (parm
))))
9896 machine_mode indmode
9897 = TYPE_MODE (TREE_TYPE (TREE_TYPE (parm
)));
9898 rtx mem
= gen_rtx_MEM (indmode
, incoming
);
9899 cselib_val
*val
= cselib_lookup_from_insn (mem
, indmode
, true,
9904 preserve_value (val
);
9905 record_entry_value (val
, mem
);
9906 set_variable_part (out
, mem
, dv_from_value (val
->val_rtx
), 0,
9907 VAR_INIT_STATUS_INITIALIZED
, NULL
, INSERT
);
9912 else if (GET_CODE (incoming
) == PARALLEL
&& !dv_onepart_p (dv
))
9916 /* The following code relies on vt_get_decl_and_offset returning true for
9917 incoming, which might not be always the case. */
9920 for (i
= 0; i
< XVECLEN (incoming
, 0); i
++)
9922 rtx reg
= XEXP (XVECEXP (incoming
, 0, i
), 0);
9923 /* vt_get_decl_and_offset has already checked that the offset
9924 is a valid variable part. */
9925 const_offset
= get_tracked_reg_offset (reg
);
9926 gcc_assert (REGNO (reg
) < FIRST_PSEUDO_REGISTER
);
9927 attrs_list_insert (&out
->regs
[REGNO (reg
)], dv
, const_offset
, reg
);
9928 set_variable_part (out
, reg
, dv
, const_offset
,
9929 VAR_INIT_STATUS_INITIALIZED
, NULL
, INSERT
);
9932 else if (MEM_P (incoming
))
9934 incoming
= var_lowpart (mode
, incoming
);
9935 set_variable_part (out
, incoming
, dv
, const_offset
,
9936 VAR_INIT_STATUS_INITIALIZED
, NULL
, INSERT
);
9940 /* Insert function parameters to IN and OUT sets of ENTRY_BLOCK. */
9943 vt_add_function_parameters (void)
9947 for (parm
= DECL_ARGUMENTS (current_function_decl
);
9948 parm
; parm
= DECL_CHAIN (parm
))
9949 vt_add_function_parameter (parm
);
9951 if (DECL_HAS_VALUE_EXPR_P (DECL_RESULT (current_function_decl
)))
9953 tree vexpr
= DECL_VALUE_EXPR (DECL_RESULT (current_function_decl
));
9955 if (TREE_CODE (vexpr
) == INDIRECT_REF
)
9956 vexpr
= TREE_OPERAND (vexpr
, 0);
9958 if (TREE_CODE (vexpr
) == PARM_DECL
9959 && DECL_ARTIFICIAL (vexpr
)
9960 && !DECL_IGNORED_P (vexpr
)
9961 && DECL_NAMELESS (vexpr
))
9962 vt_add_function_parameter (vexpr
);
9966 /* Initialize cfa_base_rtx, create a preserved VALUE for it and
9967 ensure it isn't flushed during cselib_reset_table.
9968 Can be called only if frame_pointer_rtx resp. arg_pointer_rtx
9969 has been eliminated. */
9972 vt_init_cfa_base (void)
9976 #ifdef FRAME_POINTER_CFA_OFFSET
9977 cfa_base_rtx
= frame_pointer_rtx
;
9978 cfa_base_offset
= -FRAME_POINTER_CFA_OFFSET (current_function_decl
);
9980 cfa_base_rtx
= arg_pointer_rtx
;
9981 cfa_base_offset
= -ARG_POINTER_CFA_OFFSET (current_function_decl
);
9983 if (cfa_base_rtx
== hard_frame_pointer_rtx
9984 || !fixed_regs
[REGNO (cfa_base_rtx
)])
9986 cfa_base_rtx
= NULL_RTX
;
9989 if (!MAY_HAVE_DEBUG_BIND_INSNS
)
9992 /* Tell alias analysis that cfa_base_rtx should share
9993 find_base_term value with stack pointer or hard frame pointer. */
9994 if (!frame_pointer_needed
)
9995 vt_equate_reg_base_value (cfa_base_rtx
, stack_pointer_rtx
);
9996 else if (!crtl
->stack_realign_tried
)
9997 vt_equate_reg_base_value (cfa_base_rtx
, hard_frame_pointer_rtx
);
9999 val
= cselib_lookup_from_insn (cfa_base_rtx
, GET_MODE (cfa_base_rtx
), 1,
10000 VOIDmode
, get_insns ());
10001 preserve_value (val
);
10002 cselib_preserve_cfa_base_value (val
, REGNO (cfa_base_rtx
));
10005 /* Reemit INSN, a MARKER_DEBUG_INSN, as a note. */
10008 reemit_marker_as_note (rtx_insn
*insn
)
10010 gcc_checking_assert (DEBUG_MARKER_INSN_P (insn
));
10012 enum insn_note kind
= INSN_DEBUG_MARKER_KIND (insn
);
10016 case NOTE_INSN_BEGIN_STMT
:
10017 case NOTE_INSN_INLINE_ENTRY
:
10019 rtx_insn
*note
= NULL
;
10020 if (cfun
->debug_nonbind_markers
)
10022 note
= emit_note_before (kind
, insn
);
10023 NOTE_MARKER_LOCATION (note
) = INSN_LOCATION (insn
);
10025 delete_insn (insn
);
10030 gcc_unreachable ();
10034 /* Allocate and initialize the data structures for variable tracking
10035 and parse the RTL to get the micro operations. */
10038 vt_initialize (void)
10041 poly_int64 fp_cfa_offset
= -1;
10043 alloc_aux_for_blocks (sizeof (variable_tracking_info
));
10045 empty_shared_hash
= shared_hash_pool
.allocate ();
10046 empty_shared_hash
->refcount
= 1;
10047 empty_shared_hash
->htab
= new variable_table_type (1);
10048 changed_variables
= new variable_table_type (10);
10050 /* Init the IN and OUT sets. */
10051 FOR_ALL_BB_FN (bb
, cfun
)
10053 VTI (bb
)->visited
= false;
10054 VTI (bb
)->flooded
= false;
10055 dataflow_set_init (&VTI (bb
)->in
);
10056 dataflow_set_init (&VTI (bb
)->out
);
10057 VTI (bb
)->permp
= NULL
;
10060 if (MAY_HAVE_DEBUG_BIND_INSNS
)
10062 cselib_init (CSELIB_RECORD_MEMORY
| CSELIB_PRESERVE_CONSTANTS
);
10063 scratch_regs
= BITMAP_ALLOC (NULL
);
10064 preserved_values
.create (256);
10065 global_get_addr_cache
= new hash_map
<rtx
, rtx
>;
10069 scratch_regs
= NULL
;
10070 global_get_addr_cache
= NULL
;
10073 if (MAY_HAVE_DEBUG_BIND_INSNS
)
10079 #ifdef FRAME_POINTER_CFA_OFFSET
10080 reg
= frame_pointer_rtx
;
10081 ofst
= FRAME_POINTER_CFA_OFFSET (current_function_decl
);
10083 reg
= arg_pointer_rtx
;
10084 ofst
= ARG_POINTER_CFA_OFFSET (current_function_decl
);
10087 ofst
-= INCOMING_FRAME_SP_OFFSET
;
10089 val
= cselib_lookup_from_insn (reg
, GET_MODE (reg
), 1,
10090 VOIDmode
, get_insns ());
10091 preserve_value (val
);
10092 if (reg
!= hard_frame_pointer_rtx
&& fixed_regs
[REGNO (reg
)])
10093 cselib_preserve_cfa_base_value (val
, REGNO (reg
));
10097 = cselib_lookup_from_insn (stack_pointer_rtx
,
10098 GET_MODE (stack_pointer_rtx
), 1,
10099 VOIDmode
, get_insns ());
10100 preserve_value (valsp
);
10101 expr
= plus_constant (GET_MODE (reg
), reg
, ofst
);
10102 /* This cselib_add_permanent_equiv call needs to be done before
10103 the other cselib_add_permanent_equiv a few lines later,
10104 because after that one is done, cselib_lookup on this expr
10105 will due to the cselib SP_DERIVED_VALUE_P optimizations
10106 return valsp and so no permanent equivalency will be added. */
10107 cselib_add_permanent_equiv (valsp
, expr
, get_insns ());
10110 expr
= plus_constant (GET_MODE (stack_pointer_rtx
),
10111 stack_pointer_rtx
, -ofst
);
10112 cselib_add_permanent_equiv (val
, expr
, get_insns ());
10115 /* In order to factor out the adjustments made to the stack pointer or to
10116 the hard frame pointer and thus be able to use DW_OP_fbreg operations
10117 instead of individual location lists, we're going to rewrite MEMs based
10118 on them into MEMs based on the CFA by de-eliminating stack_pointer_rtx
10119 or hard_frame_pointer_rtx to the virtual CFA pointer frame_pointer_rtx
10120 resp. arg_pointer_rtx. We can do this either when there is no frame
10121 pointer in the function and stack adjustments are consistent for all
10122 basic blocks or when there is a frame pointer and no stack realignment.
10123 But we first have to check that frame_pointer_rtx resp. arg_pointer_rtx
10124 has been eliminated. */
10125 if (!frame_pointer_needed
)
10129 if (!vt_stack_adjustments ())
10132 #ifdef FRAME_POINTER_CFA_OFFSET
10133 reg
= frame_pointer_rtx
;
10135 reg
= arg_pointer_rtx
;
10137 elim
= eliminate_regs (reg
, VOIDmode
, NULL_RTX
);
10140 if (GET_CODE (elim
) == PLUS
)
10141 elim
= XEXP (elim
, 0);
10142 if (elim
== stack_pointer_rtx
)
10143 vt_init_cfa_base ();
10146 else if (!crtl
->stack_realign_tried
)
10150 #ifdef FRAME_POINTER_CFA_OFFSET
10151 reg
= frame_pointer_rtx
;
10152 fp_cfa_offset
= FRAME_POINTER_CFA_OFFSET (current_function_decl
);
10154 reg
= arg_pointer_rtx
;
10155 fp_cfa_offset
= ARG_POINTER_CFA_OFFSET (current_function_decl
);
10157 elim
= eliminate_regs (reg
, VOIDmode
, NULL_RTX
);
10160 if (GET_CODE (elim
) == PLUS
)
10162 fp_cfa_offset
-= rtx_to_poly_int64 (XEXP (elim
, 1));
10163 elim
= XEXP (elim
, 0);
10165 if (elim
!= hard_frame_pointer_rtx
)
10166 fp_cfa_offset
= -1;
10169 fp_cfa_offset
= -1;
10172 /* If the stack is realigned and a DRAP register is used, we're going to
10173 rewrite MEMs based on it representing incoming locations of parameters
10174 passed on the stack into MEMs based on the argument pointer. Although
10175 we aren't going to rewrite other MEMs, we still need to initialize the
10176 virtual CFA pointer in order to ensure that the argument pointer will
10177 be seen as a constant throughout the function.
10179 ??? This doesn't work if FRAME_POINTER_CFA_OFFSET is defined. */
10180 else if (stack_realign_drap
)
10184 #ifdef FRAME_POINTER_CFA_OFFSET
10185 reg
= frame_pointer_rtx
;
10187 reg
= arg_pointer_rtx
;
10189 elim
= eliminate_regs (reg
, VOIDmode
, NULL_RTX
);
10192 if (GET_CODE (elim
) == PLUS
)
10193 elim
= XEXP (elim
, 0);
10194 if (elim
== hard_frame_pointer_rtx
)
10195 vt_init_cfa_base ();
10199 hard_frame_pointer_adjustment
= -1;
10201 vt_add_function_parameters ();
10203 bool record_sp_value
= false;
10204 FOR_EACH_BB_FN (bb
, cfun
)
10207 basic_block first_bb
, last_bb
;
10209 if (MAY_HAVE_DEBUG_BIND_INSNS
)
10211 cselib_record_sets_hook
= add_with_sets
;
10212 if (dump_file
&& (dump_flags
& TDF_DETAILS
))
10213 fprintf (dump_file
, "first value: %i\n",
10214 cselib_get_next_uid ());
10217 if (MAY_HAVE_DEBUG_BIND_INSNS
10219 && !frame_pointer_needed
10220 && record_sp_value
)
10221 cselib_record_sp_cfa_base_equiv (-cfa_base_offset
10222 - VTI (bb
)->in
.stack_adjust
,
10224 record_sp_value
= true;
10230 if (bb
->next_bb
== EXIT_BLOCK_PTR_FOR_FN (cfun
)
10231 || ! single_pred_p (bb
->next_bb
))
10233 e
= find_edge (bb
, bb
->next_bb
);
10234 if (! e
|| (e
->flags
& EDGE_FALLTHRU
) == 0)
10240 /* Add the micro-operations to the vector. */
10241 FOR_BB_BETWEEN (bb
, first_bb
, last_bb
->next_bb
, next_bb
)
10243 HOST_WIDE_INT offset
= VTI (bb
)->out
.stack_adjust
;
10244 VTI (bb
)->out
.stack_adjust
= VTI (bb
)->in
.stack_adjust
;
10247 FOR_BB_INSNS_SAFE (bb
, insn
, next
)
10251 HOST_WIDE_INT pre
= 0, post
= 0;
10253 if (!frame_pointer_needed
)
10255 insn_stack_adjust_offset_pre_post (insn
, &pre
, &post
);
10258 micro_operation mo
;
10259 mo
.type
= MO_ADJUST
;
10262 if (dump_file
&& (dump_flags
& TDF_DETAILS
))
10263 log_op_type (PATTERN (insn
), bb
, insn
,
10264 MO_ADJUST
, dump_file
);
10265 VTI (bb
)->mos
.safe_push (mo
);
10269 cselib_hook_called
= false;
10270 adjust_insn (bb
, insn
);
10273 VTI (bb
)->out
.stack_adjust
+= pre
;
10275 if (DEBUG_MARKER_INSN_P (insn
))
10277 reemit_marker_as_note (insn
);
10281 if (MAY_HAVE_DEBUG_BIND_INSNS
)
10284 prepare_call_arguments (bb
, insn
);
10285 cselib_process_insn (insn
);
10286 if (dump_file
&& (dump_flags
& TDF_DETAILS
))
10288 if (dump_flags
& TDF_SLIM
)
10289 dump_insn_slim (dump_file
, insn
);
10291 print_rtl_single (dump_file
, insn
);
10292 dump_cselib_table (dump_file
);
10295 if (!cselib_hook_called
)
10296 add_with_sets (insn
, 0, 0);
10297 cancel_changes (0);
10301 micro_operation mo
;
10302 mo
.type
= MO_ADJUST
;
10303 mo
.u
.adjust
= post
;
10305 if (dump_file
&& (dump_flags
& TDF_DETAILS
))
10306 log_op_type (PATTERN (insn
), bb
, insn
,
10307 MO_ADJUST
, dump_file
);
10308 VTI (bb
)->mos
.safe_push (mo
);
10309 VTI (bb
)->out
.stack_adjust
+= post
;
10312 if (maybe_ne (fp_cfa_offset
, -1)
10313 && known_eq (hard_frame_pointer_adjustment
, -1)
10314 && fp_setter_insn (insn
))
10316 vt_init_cfa_base ();
10317 hard_frame_pointer_adjustment
= fp_cfa_offset
;
10318 /* Disassociate sp from fp now. */
10319 if (MAY_HAVE_DEBUG_BIND_INSNS
)
10322 cselib_invalidate_rtx (stack_pointer_rtx
);
10323 v
= cselib_lookup (stack_pointer_rtx
, Pmode
, 1,
10325 if (v
&& !cselib_preserved_value_p (v
))
10327 cselib_set_value_sp_based (v
);
10328 preserve_value (v
);
10334 gcc_assert (offset
== VTI (bb
)->out
.stack_adjust
);
10339 if (MAY_HAVE_DEBUG_BIND_INSNS
)
10341 cselib_preserve_only_values ();
10342 cselib_reset_table (cselib_get_next_uid ());
10343 cselib_record_sets_hook
= NULL
;
10347 hard_frame_pointer_adjustment
= -1;
10348 VTI (ENTRY_BLOCK_PTR_FOR_FN (cfun
))->flooded
= true;
10349 cfa_base_rtx
= NULL_RTX
;
10353 /* This is *not* reset after each function. It gives each
10354 NOTE_INSN_DELETED_DEBUG_LABEL in the entire compilation
10355 a unique label number. */
10357 static int debug_label_num
= 1;
10359 /* Remove from the insn stream a single debug insn used for
10360 variable tracking at assignments. */
10363 delete_vta_debug_insn (rtx_insn
*insn
)
10365 if (DEBUG_MARKER_INSN_P (insn
))
10367 reemit_marker_as_note (insn
);
10371 tree decl
= INSN_VAR_LOCATION_DECL (insn
);
10372 if (TREE_CODE (decl
) == LABEL_DECL
10373 && DECL_NAME (decl
)
10374 && !DECL_RTL_SET_P (decl
))
10376 PUT_CODE (insn
, NOTE
);
10377 NOTE_KIND (insn
) = NOTE_INSN_DELETED_DEBUG_LABEL
;
10378 NOTE_DELETED_LABEL_NAME (insn
)
10379 = IDENTIFIER_POINTER (DECL_NAME (decl
));
10380 SET_DECL_RTL (decl
, insn
);
10381 CODE_LABEL_NUMBER (insn
) = debug_label_num
++;
10384 delete_insn (insn
);
10387 /* Remove from the insn stream all debug insns used for variable
10388 tracking at assignments. USE_CFG should be false if the cfg is no
10392 delete_vta_debug_insns (bool use_cfg
)
10395 rtx_insn
*insn
, *next
;
10397 if (!MAY_HAVE_DEBUG_INSNS
)
10401 FOR_EACH_BB_FN (bb
, cfun
)
10403 FOR_BB_INSNS_SAFE (bb
, insn
, next
)
10404 if (DEBUG_INSN_P (insn
))
10405 delete_vta_debug_insn (insn
);
10408 for (insn
= get_insns (); insn
; insn
= next
)
10410 next
= NEXT_INSN (insn
);
10411 if (DEBUG_INSN_P (insn
))
10412 delete_vta_debug_insn (insn
);
10416 /* Run a fast, BB-local only version of var tracking, to take care of
10417 information that we don't do global analysis on, such that not all
10418 information is lost. If SKIPPED holds, we're skipping the global
10419 pass entirely, so we should try to use information it would have
10420 handled as well.. */
10423 vt_debug_insns_local (bool skipped ATTRIBUTE_UNUSED
)
10425 /* ??? Just skip it all for now. */
10426 delete_vta_debug_insns (true);
10429 /* Free the data structures needed for variable tracking. */
10436 FOR_EACH_BB_FN (bb
, cfun
)
10438 VTI (bb
)->mos
.release ();
10441 FOR_ALL_BB_FN (bb
, cfun
)
10443 dataflow_set_destroy (&VTI (bb
)->in
);
10444 dataflow_set_destroy (&VTI (bb
)->out
);
10445 if (VTI (bb
)->permp
)
10447 dataflow_set_destroy (VTI (bb
)->permp
);
10448 XDELETE (VTI (bb
)->permp
);
10451 free_aux_for_blocks ();
10452 delete empty_shared_hash
->htab
;
10453 empty_shared_hash
->htab
= NULL
;
10454 delete changed_variables
;
10455 changed_variables
= NULL
;
10456 attrs_pool
.release ();
10457 var_pool
.release ();
10458 location_chain_pool
.release ();
10459 shared_hash_pool
.release ();
10461 if (MAY_HAVE_DEBUG_BIND_INSNS
)
10463 if (global_get_addr_cache
)
10464 delete global_get_addr_cache
;
10465 global_get_addr_cache
= NULL
;
10466 loc_exp_dep_pool
.release ();
10467 valvar_pool
.release ();
10468 preserved_values
.release ();
10470 BITMAP_FREE (scratch_regs
);
10471 scratch_regs
= NULL
;
10474 #ifdef HAVE_window_save
10475 vec_free (windowed_parm_regs
);
10479 XDELETEVEC (vui_vec
);
10484 /* The entry point to variable tracking pass. */
10486 static inline unsigned int
10487 variable_tracking_main_1 (void)
10491 /* We won't be called as a separate pass if flag_var_tracking is not
10492 set, but final may call us to turn debug markers into notes. */
10493 if ((!flag_var_tracking
&& MAY_HAVE_DEBUG_INSNS
)
10494 || flag_var_tracking_assignments
< 0
10495 /* Var-tracking right now assumes the IR doesn't contain
10496 any pseudos at this point. */
10497 || targetm
.no_register_allocation
)
10499 delete_vta_debug_insns (true);
10503 if (!flag_var_tracking
)
10506 if (n_basic_blocks_for_fn (cfun
) > 500
10507 && n_edges_for_fn (cfun
) / n_basic_blocks_for_fn (cfun
) >= 20)
10509 vt_debug_insns_local (true);
10513 if (!vt_initialize ())
10516 vt_debug_insns_local (true);
10520 success
= vt_find_locations ();
10522 if (!success
&& flag_var_tracking_assignments
> 0)
10526 delete_vta_debug_insns (true);
10528 /* This is later restored by our caller. */
10529 flag_var_tracking_assignments
= 0;
10531 success
= vt_initialize ();
10532 gcc_assert (success
);
10534 success
= vt_find_locations ();
10540 vt_debug_insns_local (false);
10544 if (dump_file
&& (dump_flags
& TDF_DETAILS
))
10546 dump_dataflow_sets ();
10547 dump_reg_info (dump_file
);
10548 dump_flow_info (dump_file
, dump_flags
);
10551 timevar_push (TV_VAR_TRACKING_EMIT
);
10553 timevar_pop (TV_VAR_TRACKING_EMIT
);
10556 vt_debug_insns_local (false);
10561 variable_tracking_main (void)
10564 int save
= flag_var_tracking_assignments
;
10566 ret
= variable_tracking_main_1 ();
10568 flag_var_tracking_assignments
= save
;
10575 const pass_data pass_data_variable_tracking
=
10577 RTL_PASS
, /* type */
10578 "vartrack", /* name */
10579 OPTGROUP_NONE
, /* optinfo_flags */
10580 TV_VAR_TRACKING
, /* tv_id */
10581 0, /* properties_required */
10582 0, /* properties_provided */
10583 0, /* properties_destroyed */
10584 0, /* todo_flags_start */
10585 0, /* todo_flags_finish */
10588 class pass_variable_tracking
: public rtl_opt_pass
10591 pass_variable_tracking (gcc::context
*ctxt
)
10592 : rtl_opt_pass (pass_data_variable_tracking
, ctxt
)
10595 /* opt_pass methods: */
10596 virtual bool gate (function
*)
10598 return (flag_var_tracking
&& !targetm
.delay_vartrack
);
10601 virtual unsigned int execute (function
*)
10603 return variable_tracking_main ();
10606 }; // class pass_variable_tracking
10608 } // anon namespace
10611 make_pass_variable_tracking (gcc::context
*ctxt
)
10613 return new pass_variable_tracking (ctxt
);