1 /* Data flow analysis for GNU compiler.
2 Copyright (C) 1987, 1988, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
3 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
5 This file is part of GCC.
7 GCC is free software; you can redistribute it and/or modify it under
8 the terms of the GNU General Public License as published by the Free
9 Software Foundation; either version 2, or (at your option) any later
12 GCC is distributed in the hope that it will be useful, but WITHOUT ANY
13 WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 You should have received a copy of the GNU General Public License
18 along with GCC; see the file COPYING. If not, write to the Free
19 Software Foundation, 59 Temple Place - Suite 330, Boston, MA
22 /* This file contains the data flow analysis pass of the compiler. It
23 computes data flow information which tells combine_instructions
24 which insns to consider combining and controls register allocation.
26 Additional data flow information that is too bulky to record is
27 generated during the analysis, and is used at that time to create
28 autoincrement and autodecrement addressing.
30 The first step is dividing the function into basic blocks.
31 find_basic_blocks does this. Then life_analysis determines
32 where each register is live and where it is dead.
34 ** find_basic_blocks **
36 find_basic_blocks divides the current function's rtl into basic
37 blocks and constructs the CFG. The blocks are recorded in the
38 basic_block_info array; the CFG exists in the edge structures
39 referenced by the blocks.
41 find_basic_blocks also finds any unreachable loops and deletes them.
45 life_analysis is called immediately after find_basic_blocks.
46 It uses the basic block information to determine where each
47 hard or pseudo register is live.
49 ** live-register info **
51 The information about where each register is live is in two parts:
52 the REG_NOTES of insns, and the vector basic_block->global_live_at_start.
54 basic_block->global_live_at_start has an element for each basic
55 block, and the element is a bit-vector with a bit for each hard or
56 pseudo register. The bit is 1 if the register is live at the
57 beginning of the basic block.
59 Two types of elements can be added to an insn's REG_NOTES.
60 A REG_DEAD note is added to an insn's REG_NOTES for any register
61 that meets both of two conditions: The value in the register is not
62 needed in subsequent insns and the insn does not replace the value in
63 the register (in the case of multi-word hard registers, the value in
64 each register must be replaced by the insn to avoid a REG_DEAD note).
66 In the vast majority of cases, an object in a REG_DEAD note will be
67 used somewhere in the insn. The (rare) exception to this is if an
68 insn uses a multi-word hard register and only some of the registers are
69 needed in subsequent insns. In that case, REG_DEAD notes will be
70 provided for those hard registers that are not subsequently needed.
71 Partial REG_DEAD notes of this type do not occur when an insn sets
72 only some of the hard registers used in such a multi-word operand;
73 omitting REG_DEAD notes for objects stored in an insn is optional and
74 the desire to do so does not justify the complexity of the partial
77 REG_UNUSED notes are added for each register that is set by the insn
78 but is unused subsequently (if every register set by the insn is unused
79 and the insn does not reference memory or have some other side-effect,
80 the insn is deleted instead). If only part of a multi-word hard
81 register is used in a subsequent insn, REG_UNUSED notes are made for
82 the parts that will not be used.
84 To determine which registers are live after any insn, one can
85 start from the beginning of the basic block and scan insns, noting
86 which registers are set by each insn and which die there.
88 ** Other actions of life_analysis **
90 life_analysis sets up the LOG_LINKS fields of insns because the
91 information needed to do so is readily available.
93 life_analysis deletes insns whose only effect is to store a value
96 life_analysis notices cases where a reference to a register as
97 a memory address can be combined with a preceding or following
98 incrementation or decrementation of the register. The separate
99 instruction to increment or decrement is deleted and the address
100 is changed to a POST_INC or similar rtx.
102 Each time an incrementing or decrementing address is created,
103 a REG_INC element is added to the insn's REG_NOTES list.
105 life_analysis fills in certain vectors containing information about
106 register usage: REG_N_REFS, REG_N_DEATHS, REG_N_SETS, REG_LIVE_LENGTH,
107 REG_N_CALLS_CROSSED and REG_BASIC_BLOCK.
109 life_analysis sets current_function_sp_is_unchanging if the function
110 doesn't modify the stack pointer. */
114 Split out from life_analysis:
115 - local property discovery
116 - global property computation
118 - pre/post modify transformation
123 #include "coretypes.h"
128 #include "hard-reg-set.h"
129 #include "basic-block.h"
130 #include "insn-config.h"
134 #include "function.h"
142 #include "splay-tree.h"
144 #ifndef HAVE_epilogue
145 #define HAVE_epilogue 0
147 #ifndef HAVE_prologue
148 #define HAVE_prologue 0
150 #ifndef HAVE_sibcall_epilogue
151 #define HAVE_sibcall_epilogue 0
154 #ifndef EPILOGUE_USES
155 #define EPILOGUE_USES(REGNO) 0
158 #define EH_USES(REGNO) 0
161 #ifdef HAVE_conditional_execution
162 #ifndef REVERSE_CONDEXEC_PREDICATES_P
163 #define REVERSE_CONDEXEC_PREDICATES_P(x, y) \
164 (GET_CODE ((x)) == reversed_comparison_code ((y), NULL))
168 /* Nonzero if the second flow pass has completed. */
171 /* Maximum register number used in this function, plus one. */
175 /* Indexed by n, giving various register information */
177 varray_type reg_n_info
;
179 /* Size of a regset for the current function,
180 in (1) bytes and (2) elements. */
185 /* Regset of regs live when calls to `setjmp'-like functions happen. */
186 /* ??? Does this exist only for the setjmp-clobbered warning message? */
188 regset regs_live_at_setjmp
;
190 /* List made of EXPR_LIST rtx's which gives pairs of pseudo registers
191 that have to go in the same hard reg.
192 The first two regs in the list are a pair, and the next two
193 are another pair, etc. */
196 /* Set of registers that may be eliminable. These are handled specially
197 in updating regs_ever_live. */
199 static HARD_REG_SET elim_reg_set
;
201 /* Holds information for tracking conditional register life information. */
202 struct reg_cond_life_info
204 /* A boolean expression of conditions under which a register is dead. */
206 /* Conditions under which a register is dead at the basic block end. */
209 /* A boolean expression of conditions under which a register has been
213 /* ??? Could store mask of bytes that are dead, so that we could finally
214 track lifetimes of multi-word registers accessed via subregs. */
217 /* For use in communicating between propagate_block and its subroutines.
218 Holds all information needed to compute life and def-use information. */
220 struct propagate_block_info
222 /* The basic block we're considering. */
225 /* Bit N is set if register N is conditionally or unconditionally live. */
228 /* Bit N is set if register N is set this insn. */
231 /* Element N is the next insn that uses (hard or pseudo) register N
232 within the current basic block; or zero, if there is no such insn. */
235 /* Contains a list of all the MEMs we are tracking for dead store
239 /* If non-null, record the set of registers set unconditionally in the
243 /* If non-null, record the set of registers set conditionally in the
245 regset cond_local_set
;
247 #ifdef HAVE_conditional_execution
248 /* Indexed by register number, holds a reg_cond_life_info for each
249 register that is not unconditionally live or dead. */
250 splay_tree reg_cond_dead
;
252 /* Bit N is set if register N is in an expression in reg_cond_dead. */
256 /* The length of mem_set_list. */
257 int mem_set_list_len
;
259 /* Nonzero if the value of CC0 is live. */
262 /* Flags controlling the set of information propagate_block collects. */
264 /* Index of instruction being processed. */
268 /* Number of dead insns removed. */
271 /* When PROP_REG_INFO set, array contains pbi->insn_num of instruction
272 where given register died. When the register is marked alive, we use the
273 information to compute amount of instructions life range cross.
274 (remember, we are walking backward). This can be computed as current
275 pbi->insn_num - reg_deaths[regno].
276 At the end of processing each basic block, the remaining live registers
277 are inspected and liferanges are increased same way so liverange of global
278 registers are computed correctly.
280 The array is maintained clear for dead registers, so it can be safely reused
281 for next basic block without expensive memset of the whole array after
282 reseting pbi->insn_num to 0. */
284 static int *reg_deaths
;
286 /* Maximum length of pbi->mem_set_list before we start dropping
287 new elements on the floor. */
288 #define MAX_MEM_SET_LIST_LEN 100
290 /* Forward declarations */
291 static int verify_wide_reg_1 (rtx
*, void *);
292 static void verify_wide_reg (int, basic_block
);
293 static void verify_local_live_at_start (regset
, basic_block
);
294 static void notice_stack_pointer_modification_1 (rtx
, rtx
, void *);
295 static void notice_stack_pointer_modification (void);
296 static void mark_reg (rtx
, void *);
297 static void mark_regs_live_at_end (regset
);
298 static void calculate_global_regs_live (sbitmap
, sbitmap
, int);
299 static void propagate_block_delete_insn (rtx
);
300 static rtx
propagate_block_delete_libcall (rtx
, rtx
);
301 static int insn_dead_p (struct propagate_block_info
*, rtx
, int, rtx
);
302 static int libcall_dead_p (struct propagate_block_info
*, rtx
, rtx
);
303 static void mark_set_regs (struct propagate_block_info
*, rtx
, rtx
);
304 static void mark_set_1 (struct propagate_block_info
*, enum rtx_code
, rtx
,
306 static int find_regno_partial (rtx
*, void *);
308 #ifdef HAVE_conditional_execution
309 static int mark_regno_cond_dead (struct propagate_block_info
*, int, rtx
);
310 static void free_reg_cond_life_info (splay_tree_value
);
311 static int flush_reg_cond_reg_1 (splay_tree_node
, void *);
312 static void flush_reg_cond_reg (struct propagate_block_info
*, int);
313 static rtx
elim_reg_cond (rtx
, unsigned int);
314 static rtx
ior_reg_cond (rtx
, rtx
, int);
315 static rtx
not_reg_cond (rtx
);
316 static rtx
and_reg_cond (rtx
, rtx
, int);
319 static void attempt_auto_inc (struct propagate_block_info
*, rtx
, rtx
, rtx
,
321 static void find_auto_inc (struct propagate_block_info
*, rtx
, rtx
);
322 static int try_pre_increment_1 (struct propagate_block_info
*, rtx
);
323 static int try_pre_increment (rtx
, rtx
, HOST_WIDE_INT
);
325 static void mark_used_reg (struct propagate_block_info
*, rtx
, rtx
, rtx
);
326 static void mark_used_regs (struct propagate_block_info
*, rtx
, rtx
, rtx
);
327 void debug_flow_info (void);
328 static void add_to_mem_set_list (struct propagate_block_info
*, rtx
);
329 static int invalidate_mems_from_autoinc (rtx
*, void *);
330 static void invalidate_mems_from_set (struct propagate_block_info
*, rtx
);
331 static void clear_log_links (sbitmap
);
332 static int count_or_remove_death_notes_bb (basic_block
, int);
333 static void allocate_bb_life_data (void);
335 /* Return the INSN immediately following the NOTE_INSN_BASIC_BLOCK
336 note associated with the BLOCK. */
339 first_insn_after_basic_block_note (basic_block block
)
343 /* Get the first instruction in the block. */
344 insn
= BB_HEAD (block
);
346 if (insn
== NULL_RTX
)
349 insn
= NEXT_INSN (insn
);
350 gcc_assert (NOTE_INSN_BASIC_BLOCK_P (insn
));
352 return NEXT_INSN (insn
);
355 /* Perform data flow analysis for the whole control flow graph.
356 FLAGS is a set of PROP_* flags to be used in accumulating flow info. */
359 life_analysis (FILE *file
, int flags
)
361 #ifdef ELIMINABLE_REGS
363 static const struct {const int from
, to
; } eliminables
[] = ELIMINABLE_REGS
;
366 /* Record which registers will be eliminated. We use this in
369 CLEAR_HARD_REG_SET (elim_reg_set
);
371 #ifdef ELIMINABLE_REGS
372 for (i
= 0; i
< (int) ARRAY_SIZE (eliminables
); i
++)
373 SET_HARD_REG_BIT (elim_reg_set
, eliminables
[i
].from
);
375 SET_HARD_REG_BIT (elim_reg_set
, FRAME_POINTER_REGNUM
);
379 #ifdef CANNOT_CHANGE_MODE_CLASS
380 if (flags
& PROP_REG_INFO
)
381 init_subregs_of_mode ();
385 flags
&= ~(PROP_LOG_LINKS
| PROP_AUTOINC
| PROP_ALLOW_CFG_CHANGES
);
387 /* The post-reload life analysis have (on a global basis) the same
388 registers live as was computed by reload itself. elimination
389 Otherwise offsets and such may be incorrect.
391 Reload will make some registers as live even though they do not
394 We don't want to create new auto-incs after reload, since they
395 are unlikely to be useful and can cause problems with shared
397 if (reload_completed
)
398 flags
&= ~(PROP_REG_INFO
| PROP_AUTOINC
);
400 /* We want alias analysis information for local dead store elimination. */
401 if (optimize
&& (flags
& PROP_SCAN_DEAD_STORES
))
402 init_alias_analysis ();
404 /* Always remove no-op moves. Do this before other processing so
405 that we don't have to keep re-scanning them. */
406 delete_noop_moves ();
408 /* Some targets can emit simpler epilogues if they know that sp was
409 not ever modified during the function. After reload, of course,
410 we've already emitted the epilogue so there's no sense searching. */
411 if (! reload_completed
)
412 notice_stack_pointer_modification ();
414 /* Allocate and zero out data structures that will record the
415 data from lifetime analysis. */
416 allocate_reg_life_data ();
417 allocate_bb_life_data ();
419 /* Find the set of registers live on function exit. */
420 mark_regs_live_at_end (EXIT_BLOCK_PTR
->global_live_at_start
);
422 /* "Update" life info from zero. It'd be nice to begin the
423 relaxation with just the exit and noreturn blocks, but that set
424 is not immediately handy. */
426 if (flags
& PROP_REG_INFO
)
428 memset (regs_ever_live
, 0, sizeof (regs_ever_live
));
429 memset (regs_asm_clobbered
, 0, sizeof (regs_asm_clobbered
));
431 update_life_info (NULL
, UPDATE_LIFE_GLOBAL
, flags
);
439 if (optimize
&& (flags
& PROP_SCAN_DEAD_STORES
))
440 end_alias_analysis ();
443 dump_flow_info (file
);
445 /* Removing dead insns should have made jumptables really dead. */
446 delete_dead_jumptables ();
449 /* A subroutine of verify_wide_reg, called through for_each_rtx.
450 Search for REGNO. If found, return 2 if it is not wider than
454 verify_wide_reg_1 (rtx
*px
, void *pregno
)
457 unsigned int regno
= *(int *) pregno
;
459 if (REG_P (x
) && REGNO (x
) == regno
)
461 if (GET_MODE_BITSIZE (GET_MODE (x
)) <= BITS_PER_WORD
)
468 /* A subroutine of verify_local_live_at_start. Search through insns
469 of BB looking for register REGNO. */
472 verify_wide_reg (int regno
, basic_block bb
)
474 rtx head
= BB_HEAD (bb
), end
= BB_END (bb
);
480 int r
= for_each_rtx (&PATTERN (head
), verify_wide_reg_1
, ®no
);
488 head
= NEXT_INSN (head
);
492 fprintf (dump_file
, "Register %d died unexpectedly.\n", regno
);
493 dump_bb (bb
, dump_file
, 0);
495 fatal_error ("internal consistency failure");
498 /* A subroutine of update_life_info. Verify that there are no untoward
499 changes in live_at_start during a local update. */
502 verify_local_live_at_start (regset new_live_at_start
, basic_block bb
)
504 if (reload_completed
)
506 /* After reload, there are no pseudos, nor subregs of multi-word
507 registers. The regsets should exactly match. */
508 if (! REG_SET_EQUAL_P (new_live_at_start
, bb
->global_live_at_start
))
513 "live_at_start mismatch in bb %d, aborting\nNew:\n",
515 debug_bitmap_file (dump_file
, new_live_at_start
);
516 fputs ("Old:\n", dump_file
);
517 dump_bb (bb
, dump_file
, 0);
519 fatal_error ("internal consistency failure");
525 reg_set_iterator rsi
;
527 /* Find the set of changed registers. */
528 XOR_REG_SET (new_live_at_start
, bb
->global_live_at_start
);
530 EXECUTE_IF_SET_IN_REG_SET (new_live_at_start
, 0, i
, rsi
)
532 /* No registers should die. */
533 if (REGNO_REG_SET_P (bb
->global_live_at_start
, i
))
538 "Register %d died unexpectedly.\n", i
);
539 dump_bb (bb
, dump_file
, 0);
541 fatal_error ("internal consistency failure");
543 /* Verify that the now-live register is wider than word_mode. */
544 verify_wide_reg (i
, bb
);
549 /* Updates life information starting with the basic blocks set in BLOCKS.
550 If BLOCKS is null, consider it to be the universal set.
552 If EXTENT is UPDATE_LIFE_LOCAL, such as after splitting or peepholing,
553 we are only expecting local modifications to basic blocks. If we find
554 extra registers live at the beginning of a block, then we either killed
555 useful data, or we have a broken split that wants data not provided.
556 If we find registers removed from live_at_start, that means we have
557 a broken peephole that is killing a register it shouldn't.
559 ??? This is not true in one situation -- when a pre-reload splitter
560 generates subregs of a multi-word pseudo, current life analysis will
561 lose the kill. So we _can_ have a pseudo go live. How irritating.
563 It is also not true when a peephole decides that it doesn't need one
564 or more of the inputs.
566 Including PROP_REG_INFO does not properly refresh regs_ever_live
567 unless the caller resets it to zero. */
570 update_life_info (sbitmap blocks
, enum update_life_extent extent
,
575 int stabilized_prop_flags
= prop_flags
;
578 tmp
= ALLOC_REG_SET (®_obstack
);
581 if ((prop_flags
& PROP_REG_INFO
) && !reg_deaths
)
582 reg_deaths
= xcalloc (sizeof (*reg_deaths
), max_regno
);
584 timevar_push ((extent
== UPDATE_LIFE_LOCAL
|| blocks
)
585 ? TV_LIFE_UPDATE
: TV_LIFE
);
587 /* Changes to the CFG are only allowed when
588 doing a global update for the entire CFG. */
589 gcc_assert (!(prop_flags
& PROP_ALLOW_CFG_CHANGES
)
590 || (extent
!= UPDATE_LIFE_LOCAL
&& !blocks
));
592 /* For a global update, we go through the relaxation process again. */
593 if (extent
!= UPDATE_LIFE_LOCAL
)
599 calculate_global_regs_live (blocks
, blocks
,
600 prop_flags
& (PROP_SCAN_DEAD_CODE
601 | PROP_SCAN_DEAD_STORES
602 | PROP_ALLOW_CFG_CHANGES
));
604 if ((prop_flags
& (PROP_KILL_DEAD_CODE
| PROP_ALLOW_CFG_CHANGES
))
605 != (PROP_KILL_DEAD_CODE
| PROP_ALLOW_CFG_CHANGES
))
608 /* Removing dead code may allow the CFG to be simplified which
609 in turn may allow for further dead code detection / removal. */
610 FOR_EACH_BB_REVERSE (bb
)
612 COPY_REG_SET (tmp
, bb
->global_live_at_end
);
613 changed
|= propagate_block (bb
, tmp
, NULL
, NULL
,
614 prop_flags
& (PROP_SCAN_DEAD_CODE
615 | PROP_SCAN_DEAD_STORES
616 | PROP_KILL_DEAD_CODE
));
619 /* Don't pass PROP_SCAN_DEAD_CODE or PROP_KILL_DEAD_CODE to
620 subsequent propagate_block calls, since removing or acting as
621 removing dead code can affect global register liveness, which
622 is supposed to be finalized for this call after this loop. */
623 stabilized_prop_flags
624 &= ~(PROP_SCAN_DEAD_CODE
| PROP_SCAN_DEAD_STORES
625 | PROP_KILL_DEAD_CODE
);
630 /* We repeat regardless of what cleanup_cfg says. If there were
631 instructions deleted above, that might have been only a
632 partial improvement (see MAX_MEM_SET_LIST_LEN usage).
633 Further improvement may be possible. */
634 cleanup_cfg (CLEANUP_EXPENSIVE
);
636 /* Zap the life information from the last round. If we don't
637 do this, we can wind up with registers that no longer appear
638 in the code being marked live at entry. */
641 CLEAR_REG_SET (bb
->global_live_at_start
);
642 CLEAR_REG_SET (bb
->global_live_at_end
);
646 /* If asked, remove notes from the blocks we'll update. */
647 if (extent
== UPDATE_LIFE_GLOBAL_RM_NOTES
)
648 count_or_remove_death_notes (blocks
, 1);
651 /* Clear log links in case we are asked to (re)compute them. */
652 if (prop_flags
& PROP_LOG_LINKS
)
653 clear_log_links (blocks
);
657 EXECUTE_IF_SET_IN_SBITMAP (blocks
, 0, i
,
659 bb
= BASIC_BLOCK (i
);
661 COPY_REG_SET (tmp
, bb
->global_live_at_end
);
662 propagate_block (bb
, tmp
, NULL
, NULL
, stabilized_prop_flags
);
664 if (extent
== UPDATE_LIFE_LOCAL
)
665 verify_local_live_at_start (tmp
, bb
);
670 FOR_EACH_BB_REVERSE (bb
)
672 COPY_REG_SET (tmp
, bb
->global_live_at_end
);
674 propagate_block (bb
, tmp
, NULL
, NULL
, stabilized_prop_flags
);
676 if (extent
== UPDATE_LIFE_LOCAL
)
677 verify_local_live_at_start (tmp
, bb
);
683 if (prop_flags
& PROP_REG_INFO
)
685 reg_set_iterator rsi
;
687 /* The only pseudos that are live at the beginning of the function
688 are those that were not set anywhere in the function. local-alloc
689 doesn't know how to handle these correctly, so mark them as not
690 local to any one basic block. */
691 EXECUTE_IF_SET_IN_REG_SET (ENTRY_BLOCK_PTR
->global_live_at_end
,
692 FIRST_PSEUDO_REGISTER
, i
, rsi
)
693 REG_BASIC_BLOCK (i
) = REG_BLOCK_GLOBAL
;
695 /* We have a problem with any pseudoreg that lives across the setjmp.
696 ANSI says that if a user variable does not change in value between
697 the setjmp and the longjmp, then the longjmp preserves it. This
698 includes longjmp from a place where the pseudo appears dead.
699 (In principle, the value still exists if it is in scope.)
700 If the pseudo goes in a hard reg, some other value may occupy
701 that hard reg where this pseudo is dead, thus clobbering the pseudo.
702 Conclusion: such a pseudo must not go in a hard reg. */
703 EXECUTE_IF_SET_IN_REG_SET (regs_live_at_setjmp
,
704 FIRST_PSEUDO_REGISTER
, i
, rsi
)
706 if (regno_reg_rtx
[i
] != 0)
708 REG_LIVE_LENGTH (i
) = -1;
709 REG_BASIC_BLOCK (i
) = REG_BLOCK_UNKNOWN
;
718 timevar_pop ((extent
== UPDATE_LIFE_LOCAL
|| blocks
)
719 ? TV_LIFE_UPDATE
: TV_LIFE
);
720 if (ndead
&& dump_file
)
721 fprintf (dump_file
, "deleted %i dead insns\n", ndead
);
725 /* Update life information in all blocks where BB_DIRTY is set. */
728 update_life_info_in_dirty_blocks (enum update_life_extent extent
, int prop_flags
)
730 sbitmap update_life_blocks
= sbitmap_alloc (last_basic_block
);
735 sbitmap_zero (update_life_blocks
);
738 if (extent
== UPDATE_LIFE_LOCAL
)
740 if (bb
->flags
& BB_DIRTY
)
742 SET_BIT (update_life_blocks
, bb
->index
);
748 /* ??? Bootstrap with -march=pentium4 fails to terminate
749 with only a partial life update. */
750 SET_BIT (update_life_blocks
, bb
->index
);
751 if (bb
->flags
& BB_DIRTY
)
757 retval
= update_life_info (update_life_blocks
, extent
, prop_flags
);
759 sbitmap_free (update_life_blocks
);
763 /* Free the variables allocated by find_basic_blocks. */
766 free_basic_block_vars (void)
768 if (basic_block_info
)
771 basic_block_info
= NULL
;
774 last_basic_block
= 0;
776 ENTRY_BLOCK_PTR
->aux
= NULL
;
777 ENTRY_BLOCK_PTR
->global_live_at_end
= NULL
;
778 EXIT_BLOCK_PTR
->aux
= NULL
;
779 EXIT_BLOCK_PTR
->global_live_at_start
= NULL
;
782 /* Delete any insns that copy a register to itself. */
785 delete_noop_moves (void)
793 for (insn
= BB_HEAD (bb
); insn
!= NEXT_INSN (BB_END (bb
)); insn
= next
)
795 next
= NEXT_INSN (insn
);
796 if (INSN_P (insn
) && noop_move_p (insn
))
800 /* If we're about to remove the first insn of a libcall
801 then move the libcall note to the next real insn and
802 update the retval note. */
803 if ((note
= find_reg_note (insn
, REG_LIBCALL
, NULL_RTX
))
804 && XEXP (note
, 0) != insn
)
806 rtx new_libcall_insn
= next_real_insn (insn
);
807 rtx retval_note
= find_reg_note (XEXP (note
, 0),
808 REG_RETVAL
, NULL_RTX
);
809 REG_NOTES (new_libcall_insn
)
810 = gen_rtx_INSN_LIST (REG_LIBCALL
, XEXP (note
, 0),
811 REG_NOTES (new_libcall_insn
));
812 XEXP (retval_note
, 0) = new_libcall_insn
;
815 delete_insn_and_edges (insn
);
820 if (nnoops
&& dump_file
)
821 fprintf (dump_file
, "deleted %i noop moves", nnoops
);
825 /* Delete any jump tables never referenced. We can't delete them at the
826 time of removing tablejump insn as they are referenced by the preceding
827 insns computing the destination, so we delay deleting and garbagecollect
828 them once life information is computed. */
830 delete_dead_jumptables (void)
833 for (insn
= get_insns (); insn
; insn
= next
)
835 next
= NEXT_INSN (insn
);
837 && LABEL_NUSES (insn
) == LABEL_PRESERVE_P (insn
)
839 && (GET_CODE (PATTERN (next
)) == ADDR_VEC
840 || GET_CODE (PATTERN (next
)) == ADDR_DIFF_VEC
))
843 fprintf (dump_file
, "Dead jumptable %i removed\n", INSN_UID (insn
));
844 delete_insn (NEXT_INSN (insn
));
846 next
= NEXT_INSN (next
);
851 /* Determine if the stack pointer is constant over the life of the function.
852 Only useful before prologues have been emitted. */
855 notice_stack_pointer_modification_1 (rtx x
, rtx pat ATTRIBUTE_UNUSED
,
856 void *data ATTRIBUTE_UNUSED
)
858 if (x
== stack_pointer_rtx
859 /* The stack pointer is only modified indirectly as the result
860 of a push until later in flow. See the comments in rtl.texi
861 regarding Embedded Side-Effects on Addresses. */
863 && GET_RTX_CLASS (GET_CODE (XEXP (x
, 0))) == RTX_AUTOINC
864 && XEXP (XEXP (x
, 0), 0) == stack_pointer_rtx
))
865 current_function_sp_is_unchanging
= 0;
869 notice_stack_pointer_modification (void)
874 /* Assume that the stack pointer is unchanging if alloca hasn't
876 current_function_sp_is_unchanging
= !current_function_calls_alloca
;
877 if (! current_function_sp_is_unchanging
)
881 FOR_BB_INSNS (bb
, insn
)
885 /* Check if insn modifies the stack pointer. */
886 note_stores (PATTERN (insn
),
887 notice_stack_pointer_modification_1
,
889 if (! current_function_sp_is_unchanging
)
895 /* Mark a register in SET. Hard registers in large modes get all
896 of their component registers set as well. */
899 mark_reg (rtx reg
, void *xset
)
901 regset set
= (regset
) xset
;
902 int regno
= REGNO (reg
);
904 gcc_assert (GET_MODE (reg
) != BLKmode
);
906 SET_REGNO_REG_SET (set
, regno
);
907 if (regno
< FIRST_PSEUDO_REGISTER
)
909 int n
= hard_regno_nregs
[regno
][GET_MODE (reg
)];
911 SET_REGNO_REG_SET (set
, regno
+ n
);
915 /* Mark those regs which are needed at the end of the function as live
916 at the end of the last basic block. */
919 mark_regs_live_at_end (regset set
)
923 /* If exiting needs the right stack value, consider the stack pointer
924 live at the end of the function. */
925 if ((HAVE_epilogue
&& epilogue_completed
)
926 || ! EXIT_IGNORE_STACK
927 || (! FRAME_POINTER_REQUIRED
928 && ! current_function_calls_alloca
929 && flag_omit_frame_pointer
)
930 || current_function_sp_is_unchanging
)
932 SET_REGNO_REG_SET (set
, STACK_POINTER_REGNUM
);
935 /* Mark the frame pointer if needed at the end of the function. If
936 we end up eliminating it, it will be removed from the live list
937 of each basic block by reload. */
939 if (! reload_completed
|| frame_pointer_needed
)
941 SET_REGNO_REG_SET (set
, FRAME_POINTER_REGNUM
);
942 #if FRAME_POINTER_REGNUM != HARD_FRAME_POINTER_REGNUM
943 /* If they are different, also mark the hard frame pointer as live. */
944 if (! LOCAL_REGNO (HARD_FRAME_POINTER_REGNUM
))
945 SET_REGNO_REG_SET (set
, HARD_FRAME_POINTER_REGNUM
);
949 #ifndef PIC_OFFSET_TABLE_REG_CALL_CLOBBERED
950 /* Many architectures have a GP register even without flag_pic.
951 Assume the pic register is not in use, or will be handled by
952 other means, if it is not fixed. */
953 if ((unsigned) PIC_OFFSET_TABLE_REGNUM
!= INVALID_REGNUM
954 && fixed_regs
[PIC_OFFSET_TABLE_REGNUM
])
955 SET_REGNO_REG_SET (set
, PIC_OFFSET_TABLE_REGNUM
);
958 /* Mark all global registers, and all registers used by the epilogue
959 as being live at the end of the function since they may be
960 referenced by our caller. */
961 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
962 if (global_regs
[i
] || EPILOGUE_USES (i
))
963 SET_REGNO_REG_SET (set
, i
);
965 if (HAVE_epilogue
&& epilogue_completed
)
967 /* Mark all call-saved registers that we actually used. */
968 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
969 if (regs_ever_live
[i
] && ! LOCAL_REGNO (i
)
970 && ! TEST_HARD_REG_BIT (regs_invalidated_by_call
, i
))
971 SET_REGNO_REG_SET (set
, i
);
974 #ifdef EH_RETURN_DATA_REGNO
975 /* Mark the registers that will contain data for the handler. */
976 if (reload_completed
&& current_function_calls_eh_return
)
979 unsigned regno
= EH_RETURN_DATA_REGNO(i
);
980 if (regno
== INVALID_REGNUM
)
982 SET_REGNO_REG_SET (set
, regno
);
985 #ifdef EH_RETURN_STACKADJ_RTX
986 if ((! HAVE_epilogue
|| ! epilogue_completed
)
987 && current_function_calls_eh_return
)
989 rtx tmp
= EH_RETURN_STACKADJ_RTX
;
990 if (tmp
&& REG_P (tmp
))
994 #ifdef EH_RETURN_HANDLER_RTX
995 if ((! HAVE_epilogue
|| ! epilogue_completed
)
996 && current_function_calls_eh_return
)
998 rtx tmp
= EH_RETURN_HANDLER_RTX
;
999 if (tmp
&& REG_P (tmp
))
1000 mark_reg (tmp
, set
);
1004 /* Mark function return value. */
1005 diddle_return_value (mark_reg
, set
);
1008 /* Propagate global life info around the graph of basic blocks. Begin
1009 considering blocks with their corresponding bit set in BLOCKS_IN.
1010 If BLOCKS_IN is null, consider it the universal set.
1012 BLOCKS_OUT is set for every block that was changed. */
1015 calculate_global_regs_live (sbitmap blocks_in
, sbitmap blocks_out
, int flags
)
1017 basic_block
*queue
, *qhead
, *qtail
, *qend
, bb
;
1018 regset tmp
, new_live_at_end
, invalidated_by_call
;
1020 /* The registers that are modified within this in block. */
1023 /* The registers that are conditionally modified within this block.
1024 In other words, regs that are set only as part of a COND_EXEC. */
1025 regset
*cond_local_sets
;
1029 /* Some passes used to forget clear aux field of basic block causing
1030 sick behavior here. */
1031 #ifdef ENABLE_CHECKING
1032 FOR_BB_BETWEEN (bb
, ENTRY_BLOCK_PTR
, NULL
, next_bb
)
1033 gcc_assert (!bb
->aux
);
1036 tmp
= ALLOC_REG_SET (®_obstack
);
1037 new_live_at_end
= ALLOC_REG_SET (®_obstack
);
1038 invalidated_by_call
= ALLOC_REG_SET (®_obstack
);
1040 /* Inconveniently, this is only readily available in hard reg set form. */
1041 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; ++i
)
1042 if (TEST_HARD_REG_BIT (regs_invalidated_by_call
, i
))
1043 SET_REGNO_REG_SET (invalidated_by_call
, i
);
1045 /* Allocate space for the sets of local properties. */
1046 local_sets
= xcalloc (last_basic_block
- (INVALID_BLOCK
+ 1),
1048 cond_local_sets
= xcalloc (last_basic_block
- (INVALID_BLOCK
+ 1),
1051 /* Create a worklist. Allocate an extra slot for ENTRY_BLOCK, and one
1052 because the `head == tail' style test for an empty queue doesn't
1053 work with a full queue. */
1054 queue
= xmalloc ((n_basic_blocks
- (INVALID_BLOCK
+ 1)) * sizeof (*queue
));
1056 qhead
= qend
= queue
+ n_basic_blocks
- (INVALID_BLOCK
+ 1);
1058 /* Queue the blocks set in the initial mask. Do this in reverse block
1059 number order so that we are more likely for the first round to do
1060 useful work. We use AUX non-null to flag that the block is queued. */
1064 if (TEST_BIT (blocks_in
, bb
->index
))
1079 /* We clean aux when we remove the initially-enqueued bbs, but we
1080 don't enqueue ENTRY and EXIT initially, so clean them upfront and
1082 ENTRY_BLOCK_PTR
->aux
= EXIT_BLOCK_PTR
->aux
= NULL
;
1085 sbitmap_zero (blocks_out
);
1087 /* We work through the queue until there are no more blocks. What
1088 is live at the end of this block is precisely the union of what
1089 is live at the beginning of all its successors. So, we set its
1090 GLOBAL_LIVE_AT_END field based on the GLOBAL_LIVE_AT_START field
1091 for its successors. Then, we compute GLOBAL_LIVE_AT_START for
1092 this block by walking through the instructions in this block in
1093 reverse order and updating as we go. If that changed
1094 GLOBAL_LIVE_AT_START, we add the predecessors of the block to the
1095 queue; they will now need to recalculate GLOBAL_LIVE_AT_END.
1097 We are guaranteed to terminate, because GLOBAL_LIVE_AT_START
1098 never shrinks. If a register appears in GLOBAL_LIVE_AT_START, it
1099 must either be live at the end of the block, or used within the
1100 block. In the latter case, it will certainly never disappear
1101 from GLOBAL_LIVE_AT_START. In the former case, the register
1102 could go away only if it disappeared from GLOBAL_LIVE_AT_START
1103 for one of the successor blocks. By induction, that cannot
1105 while (qhead
!= qtail
)
1107 int rescan
, changed
;
1117 /* Begin by propagating live_at_start from the successor blocks. */
1118 CLEAR_REG_SET (new_live_at_end
);
1120 if (EDGE_COUNT (bb
->succs
) > 0)
1121 FOR_EACH_EDGE (e
, ei
, bb
->succs
)
1123 basic_block sb
= e
->dest
;
1125 /* Call-clobbered registers die across exception and
1127 /* ??? Abnormal call edges ignored for the moment, as this gets
1128 confused by sibling call edges, which crashes reg-stack. */
1129 if (e
->flags
& EDGE_EH
)
1130 bitmap_ior_and_compl_into (new_live_at_end
,
1131 sb
->global_live_at_start
,
1132 invalidated_by_call
);
1134 IOR_REG_SET (new_live_at_end
, sb
->global_live_at_start
);
1136 /* If a target saves one register in another (instead of on
1137 the stack) the save register will need to be live for EH. */
1138 if (e
->flags
& EDGE_EH
)
1139 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
1141 SET_REGNO_REG_SET (new_live_at_end
, i
);
1145 /* This might be a noreturn function that throws. And
1146 even if it isn't, getting the unwind info right helps
1148 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
1150 SET_REGNO_REG_SET (new_live_at_end
, i
);
1153 /* The all-important stack pointer must always be live. */
1154 SET_REGNO_REG_SET (new_live_at_end
, STACK_POINTER_REGNUM
);
1156 /* Before reload, there are a few registers that must be forced
1157 live everywhere -- which might not already be the case for
1158 blocks within infinite loops. */
1159 if (! reload_completed
)
1161 /* Any reference to any pseudo before reload is a potential
1162 reference of the frame pointer. */
1163 SET_REGNO_REG_SET (new_live_at_end
, FRAME_POINTER_REGNUM
);
1165 #if FRAME_POINTER_REGNUM != ARG_POINTER_REGNUM
1166 /* Pseudos with argument area equivalences may require
1167 reloading via the argument pointer. */
1168 if (fixed_regs
[ARG_POINTER_REGNUM
])
1169 SET_REGNO_REG_SET (new_live_at_end
, ARG_POINTER_REGNUM
);
1172 /* Any constant, or pseudo with constant equivalences, may
1173 require reloading from memory using the pic register. */
1174 if ((unsigned) PIC_OFFSET_TABLE_REGNUM
!= INVALID_REGNUM
1175 && fixed_regs
[PIC_OFFSET_TABLE_REGNUM
])
1176 SET_REGNO_REG_SET (new_live_at_end
, PIC_OFFSET_TABLE_REGNUM
);
1179 if (bb
== ENTRY_BLOCK_PTR
)
1181 COPY_REG_SET (bb
->global_live_at_end
, new_live_at_end
);
1185 /* On our first pass through this block, we'll go ahead and continue.
1186 Recognize first pass by checking if local_set is NULL for this
1187 basic block. On subsequent passes, we get to skip out early if
1188 live_at_end wouldn't have changed. */
1190 if (local_sets
[bb
->index
- (INVALID_BLOCK
+ 1)] == NULL
)
1192 local_sets
[bb
->index
- (INVALID_BLOCK
+ 1)]
1193 = ALLOC_REG_SET (®_obstack
);
1194 cond_local_sets
[bb
->index
- (INVALID_BLOCK
+ 1)]
1195 = ALLOC_REG_SET (®_obstack
);
1200 /* If any bits were removed from live_at_end, we'll have to
1201 rescan the block. This wouldn't be necessary if we had
1202 precalculated local_live, however with PROP_SCAN_DEAD_CODE
1203 local_live is really dependent on live_at_end. */
1204 rescan
= bitmap_intersect_compl_p (bb
->global_live_at_end
,
1209 regset cond_local_set
;
1211 /* If any of the registers in the new live_at_end set are
1212 conditionally set in this basic block, we must rescan.
1213 This is because conditional lifetimes at the end of the
1214 block do not just take the live_at_end set into
1215 account, but also the liveness at the start of each
1216 successor block. We can miss changes in those sets if
1217 we only compare the new live_at_end against the
1219 cond_local_set
= cond_local_sets
[bb
->index
- (INVALID_BLOCK
+ 1)];
1220 rescan
= bitmap_intersect_p (new_live_at_end
, cond_local_set
);
1227 /* Find the set of changed bits. Take this opportunity
1228 to notice that this set is empty and early out. */
1229 bitmap_xor (tmp
, bb
->global_live_at_end
, new_live_at_end
);
1230 if (bitmap_empty_p (tmp
))
1233 /* If any of the changed bits overlap with local_sets[bb],
1234 we'll have to rescan the block. */
1235 local_set
= local_sets
[bb
->index
- (INVALID_BLOCK
+ 1)];
1236 rescan
= bitmap_intersect_p (tmp
, local_set
);
1240 /* Let our caller know that BB changed enough to require its
1241 death notes updated. */
1243 SET_BIT (blocks_out
, bb
->index
);
1247 /* Add to live_at_start the set of all registers in
1248 new_live_at_end that aren't in the old live_at_end. */
1250 changed
= bitmap_ior_and_compl_into (bb
->global_live_at_start
,
1252 bb
->global_live_at_end
);
1253 COPY_REG_SET (bb
->global_live_at_end
, new_live_at_end
);
1259 COPY_REG_SET (bb
->global_live_at_end
, new_live_at_end
);
1261 /* Rescan the block insn by insn to turn (a copy of) live_at_end
1262 into live_at_start. */
1263 propagate_block (bb
, new_live_at_end
,
1264 local_sets
[bb
->index
- (INVALID_BLOCK
+ 1)],
1265 cond_local_sets
[bb
->index
- (INVALID_BLOCK
+ 1)],
1268 /* If live_at start didn't change, no need to go farther. */
1269 if (REG_SET_EQUAL_P (bb
->global_live_at_start
, new_live_at_end
))
1272 COPY_REG_SET (bb
->global_live_at_start
, new_live_at_end
);
1275 /* Queue all predecessors of BB so that we may re-examine
1276 their live_at_end. */
1277 FOR_EACH_EDGE (e
, ei
, bb
->preds
)
1279 basic_block pb
= e
->src
;
1280 if (pb
->aux
== NULL
)
1291 FREE_REG_SET (new_live_at_end
);
1292 FREE_REG_SET (invalidated_by_call
);
1296 EXECUTE_IF_SET_IN_SBITMAP (blocks_out
, 0, i
,
1298 basic_block bb
= BASIC_BLOCK (i
);
1299 FREE_REG_SET (local_sets
[bb
->index
- (INVALID_BLOCK
+ 1)]);
1300 FREE_REG_SET (cond_local_sets
[bb
->index
- (INVALID_BLOCK
+ 1)]);
1307 FREE_REG_SET (local_sets
[bb
->index
- (INVALID_BLOCK
+ 1)]);
1308 FREE_REG_SET (cond_local_sets
[bb
->index
- (INVALID_BLOCK
+ 1)]);
1313 free (cond_local_sets
);
1318 /* This structure is used to pass parameters to and from the
1319 the function find_regno_partial(). It is used to pass in the
1320 register number we are looking, as well as to return any rtx
1324 unsigned regno_to_find
;
1326 } find_regno_partial_param
;
1329 /* Find the rtx for the reg numbers specified in 'data' if it is
1330 part of an expression which only uses part of the register. Return
1331 it in the structure passed in. */
1333 find_regno_partial (rtx
*ptr
, void *data
)
1335 find_regno_partial_param
*param
= (find_regno_partial_param
*)data
;
1336 unsigned reg
= param
->regno_to_find
;
1337 param
->retval
= NULL_RTX
;
1339 if (*ptr
== NULL_RTX
)
1342 switch (GET_CODE (*ptr
))
1346 case STRICT_LOW_PART
:
1347 if (REG_P (XEXP (*ptr
, 0)) && REGNO (XEXP (*ptr
, 0)) == reg
)
1349 param
->retval
= XEXP (*ptr
, 0);
1355 if (REG_P (SUBREG_REG (*ptr
))
1356 && REGNO (SUBREG_REG (*ptr
)) == reg
)
1358 param
->retval
= SUBREG_REG (*ptr
);
1370 /* Process all immediate successors of the entry block looking for pseudo
1371 registers which are live on entry. Find all of those whose first
1372 instance is a partial register reference of some kind, and initialize
1373 them to 0 after the entry block. This will prevent bit sets within
1374 registers whose value is unknown, and may contain some kind of sticky
1375 bits we don't want. */
1378 initialize_uninitialized_subregs (void)
1382 unsigned reg
, did_something
= 0;
1383 find_regno_partial_param param
;
1386 FOR_EACH_EDGE (e
, ei
, ENTRY_BLOCK_PTR
->succs
)
1388 basic_block bb
= e
->dest
;
1389 regset map
= bb
->global_live_at_start
;
1390 reg_set_iterator rsi
;
1392 EXECUTE_IF_SET_IN_REG_SET (map
, FIRST_PSEUDO_REGISTER
, reg
, rsi
)
1394 int uid
= REGNO_FIRST_UID (reg
);
1397 /* Find an insn which mentions the register we are looking for.
1398 Its preferable to have an instance of the register's rtl since
1399 there may be various flags set which we need to duplicate.
1400 If we can't find it, its probably an automatic whose initial
1401 value doesn't matter, or hopefully something we don't care about. */
1402 for (i
= get_insns (); i
&& INSN_UID (i
) != uid
; i
= NEXT_INSN (i
))
1406 /* Found the insn, now get the REG rtx, if we can. */
1407 param
.regno_to_find
= reg
;
1408 for_each_rtx (&i
, find_regno_partial
, ¶m
);
1409 if (param
.retval
!= NULL_RTX
)
1412 emit_move_insn (param
.retval
,
1413 CONST0_RTX (GET_MODE (param
.retval
)));
1414 insn
= get_insns ();
1416 insert_insn_on_edge (insn
, e
);
1424 commit_edge_insertions ();
1425 return did_something
;
1429 /* Subroutines of life analysis. */
1431 /* Allocate the permanent data structures that represent the results
1432 of life analysis. */
1435 allocate_bb_life_data (void)
1439 FOR_BB_BETWEEN (bb
, ENTRY_BLOCK_PTR
, NULL
, next_bb
)
1441 bb
->global_live_at_start
= ALLOC_REG_SET (®_obstack
);
1442 bb
->global_live_at_end
= ALLOC_REG_SET (®_obstack
);
1445 regs_live_at_setjmp
= ALLOC_REG_SET (®_obstack
);
1449 allocate_reg_life_data (void)
1453 max_regno
= max_reg_num ();
1454 gcc_assert (!reg_deaths
);
1455 reg_deaths
= xcalloc (sizeof (*reg_deaths
), max_regno
);
1457 /* Recalculate the register space, in case it has grown. Old style
1458 vector oriented regsets would set regset_{size,bytes} here also. */
1459 allocate_reg_info (max_regno
, FALSE
, FALSE
);
1461 /* Reset all the data we'll collect in propagate_block and its
1463 for (i
= 0; i
< max_regno
; i
++)
1467 REG_N_DEATHS (i
) = 0;
1468 REG_N_CALLS_CROSSED (i
) = 0;
1469 REG_LIVE_LENGTH (i
) = 0;
1471 REG_BASIC_BLOCK (i
) = REG_BLOCK_UNKNOWN
;
1475 /* Delete dead instructions for propagate_block. */
1478 propagate_block_delete_insn (rtx insn
)
1480 rtx inote
= find_reg_note (insn
, REG_LABEL
, NULL_RTX
);
1482 /* If the insn referred to a label, and that label was attached to
1483 an ADDR_VEC, it's safe to delete the ADDR_VEC. In fact, it's
1484 pretty much mandatory to delete it, because the ADDR_VEC may be
1485 referencing labels that no longer exist.
1487 INSN may reference a deleted label, particularly when a jump
1488 table has been optimized into a direct jump. There's no
1489 real good way to fix up the reference to the deleted label
1490 when the label is deleted, so we just allow it here. */
1492 if (inote
&& LABEL_P (inote
))
1494 rtx label
= XEXP (inote
, 0);
1497 /* The label may be forced if it has been put in the constant
1498 pool. If that is the only use we must discard the table
1499 jump following it, but not the label itself. */
1500 if (LABEL_NUSES (label
) == 1 + LABEL_PRESERVE_P (label
)
1501 && (next
= next_nonnote_insn (label
)) != NULL
1503 && (GET_CODE (PATTERN (next
)) == ADDR_VEC
1504 || GET_CODE (PATTERN (next
)) == ADDR_DIFF_VEC
))
1506 rtx pat
= PATTERN (next
);
1507 int diff_vec_p
= GET_CODE (pat
) == ADDR_DIFF_VEC
;
1508 int len
= XVECLEN (pat
, diff_vec_p
);
1511 for (i
= 0; i
< len
; i
++)
1512 LABEL_NUSES (XEXP (XVECEXP (pat
, diff_vec_p
, i
), 0))--;
1514 delete_insn_and_edges (next
);
1519 delete_insn_and_edges (insn
);
1523 /* Delete dead libcalls for propagate_block. Return the insn
1524 before the libcall. */
1527 propagate_block_delete_libcall (rtx insn
, rtx note
)
1529 rtx first
= XEXP (note
, 0);
1530 rtx before
= PREV_INSN (first
);
1532 delete_insn_chain_and_edges (first
, insn
);
1537 /* Update the life-status of regs for one insn. Return the previous insn. */
1540 propagate_one_insn (struct propagate_block_info
*pbi
, rtx insn
)
1542 rtx prev
= PREV_INSN (insn
);
1543 int flags
= pbi
->flags
;
1544 int insn_is_dead
= 0;
1545 int libcall_is_dead
= 0;
1549 if (! INSN_P (insn
))
1552 note
= find_reg_note (insn
, REG_RETVAL
, NULL_RTX
);
1553 if (flags
& PROP_SCAN_DEAD_CODE
)
1555 insn_is_dead
= insn_dead_p (pbi
, PATTERN (insn
), 0, REG_NOTES (insn
));
1556 libcall_is_dead
= (insn_is_dead
&& note
!= 0
1557 && libcall_dead_p (pbi
, note
, insn
));
1560 /* If an instruction consists of just dead store(s) on final pass,
1562 if ((flags
& PROP_KILL_DEAD_CODE
) && insn_is_dead
)
1564 /* If we're trying to delete a prologue or epilogue instruction
1565 that isn't flagged as possibly being dead, something is wrong.
1566 But if we are keeping the stack pointer depressed, we might well
1567 be deleting insns that are used to compute the amount to update
1568 it by, so they are fine. */
1569 if (reload_completed
1570 && !(TREE_CODE (TREE_TYPE (current_function_decl
)) == FUNCTION_TYPE
1571 && (TYPE_RETURNS_STACK_DEPRESSED
1572 (TREE_TYPE (current_function_decl
))))
1573 && (((HAVE_epilogue
|| HAVE_prologue
)
1574 && prologue_epilogue_contains (insn
))
1575 || (HAVE_sibcall_epilogue
1576 && sibcall_epilogue_contains (insn
)))
1577 && find_reg_note (insn
, REG_MAYBE_DEAD
, NULL_RTX
) == 0)
1578 fatal_insn ("Attempt to delete prologue/epilogue insn:", insn
);
1580 /* Record sets. Do this even for dead instructions, since they
1581 would have killed the values if they hadn't been deleted. */
1582 mark_set_regs (pbi
, PATTERN (insn
), insn
);
1584 /* CC0 is now known to be dead. Either this insn used it,
1585 in which case it doesn't anymore, or clobbered it,
1586 so the next insn can't use it. */
1589 if (libcall_is_dead
)
1590 prev
= propagate_block_delete_libcall ( insn
, note
);
1594 /* If INSN contains a RETVAL note and is dead, but the libcall
1595 as a whole is not dead, then we want to remove INSN, but
1596 not the whole libcall sequence.
1598 However, we need to also remove the dangling REG_LIBCALL
1599 note so that we do not have mis-matched LIBCALL/RETVAL
1600 notes. In theory we could find a new location for the
1601 REG_RETVAL note, but it hardly seems worth the effort.
1603 NOTE at this point will be the RETVAL note if it exists. */
1609 = find_reg_note (XEXP (note
, 0), REG_LIBCALL
, NULL_RTX
);
1610 remove_note (XEXP (note
, 0), libcall_note
);
1613 /* Similarly if INSN contains a LIBCALL note, remove the
1614 dangling REG_RETVAL note. */
1615 note
= find_reg_note (insn
, REG_LIBCALL
, NULL_RTX
);
1621 = find_reg_note (XEXP (note
, 0), REG_RETVAL
, NULL_RTX
);
1622 remove_note (XEXP (note
, 0), retval_note
);
1625 /* Now delete INSN. */
1626 propagate_block_delete_insn (insn
);
1632 /* See if this is an increment or decrement that can be merged into
1633 a following memory address. */
1636 rtx x
= single_set (insn
);
1638 /* Does this instruction increment or decrement a register? */
1639 if ((flags
& PROP_AUTOINC
)
1641 && REG_P (SET_DEST (x
))
1642 && (GET_CODE (SET_SRC (x
)) == PLUS
1643 || GET_CODE (SET_SRC (x
)) == MINUS
)
1644 && XEXP (SET_SRC (x
), 0) == SET_DEST (x
)
1645 && GET_CODE (XEXP (SET_SRC (x
), 1)) == CONST_INT
1646 /* Ok, look for a following memory ref we can combine with.
1647 If one is found, change the memory ref to a PRE_INC
1648 or PRE_DEC, cancel this insn, and return 1.
1649 Return 0 if nothing has been done. */
1650 && try_pre_increment_1 (pbi
, insn
))
1653 #endif /* AUTO_INC_DEC */
1655 CLEAR_REG_SET (pbi
->new_set
);
1657 /* If this is not the final pass, and this insn is copying the value of
1658 a library call and it's dead, don't scan the insns that perform the
1659 library call, so that the call's arguments are not marked live. */
1660 if (libcall_is_dead
)
1662 /* Record the death of the dest reg. */
1663 mark_set_regs (pbi
, PATTERN (insn
), insn
);
1665 insn
= XEXP (note
, 0);
1666 return PREV_INSN (insn
);
1668 else if (GET_CODE (PATTERN (insn
)) == SET
1669 && SET_DEST (PATTERN (insn
)) == stack_pointer_rtx
1670 && GET_CODE (SET_SRC (PATTERN (insn
))) == PLUS
1671 && XEXP (SET_SRC (PATTERN (insn
)), 0) == stack_pointer_rtx
1672 && GET_CODE (XEXP (SET_SRC (PATTERN (insn
)), 1)) == CONST_INT
)
1674 /* We have an insn to pop a constant amount off the stack.
1675 (Such insns use PLUS regardless of the direction of the stack,
1676 and any insn to adjust the stack by a constant is always a pop
1678 These insns, if not dead stores, have no effect on life, though
1679 they do have an effect on the memory stores we are tracking. */
1680 invalidate_mems_from_set (pbi
, stack_pointer_rtx
);
1681 /* Still, we need to update local_set, lest ifcvt.c:dead_or_predicable
1682 concludes that the stack pointer is not modified. */
1683 mark_set_regs (pbi
, PATTERN (insn
), insn
);
1688 /* Any regs live at the time of a call instruction must not go
1689 in a register clobbered by calls. Find all regs now live and
1690 record this for them. */
1692 if (CALL_P (insn
) && (flags
& PROP_REG_INFO
))
1694 reg_set_iterator rsi
;
1695 EXECUTE_IF_SET_IN_REG_SET (pbi
->reg_live
, 0, i
, rsi
)
1696 REG_N_CALLS_CROSSED (i
)++;
1699 /* Record sets. Do this even for dead instructions, since they
1700 would have killed the values if they hadn't been deleted. */
1701 mark_set_regs (pbi
, PATTERN (insn
), insn
);
1711 if (GET_CODE (PATTERN (insn
)) == COND_EXEC
)
1712 cond
= COND_EXEC_TEST (PATTERN (insn
));
1714 /* Non-constant calls clobber memory, constant calls do not
1715 clobber memory, though they may clobber outgoing arguments
1717 if (! CONST_OR_PURE_CALL_P (insn
))
1719 free_EXPR_LIST_list (&pbi
->mem_set_list
);
1720 pbi
->mem_set_list_len
= 0;
1723 invalidate_mems_from_set (pbi
, stack_pointer_rtx
);
1725 /* There may be extra registers to be clobbered. */
1726 for (note
= CALL_INSN_FUNCTION_USAGE (insn
);
1728 note
= XEXP (note
, 1))
1729 if (GET_CODE (XEXP (note
, 0)) == CLOBBER
)
1730 mark_set_1 (pbi
, CLOBBER
, XEXP (XEXP (note
, 0), 0),
1731 cond
, insn
, pbi
->flags
);
1733 /* Calls change all call-used and global registers; sibcalls do not
1734 clobber anything that must be preserved at end-of-function,
1735 except for return values. */
1737 sibcall_p
= SIBLING_CALL_P (insn
);
1738 live_at_end
= EXIT_BLOCK_PTR
->global_live_at_start
;
1739 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
1740 if (TEST_HARD_REG_BIT (regs_invalidated_by_call
, i
)
1742 && REGNO_REG_SET_P (live_at_end
, i
)
1743 && ! refers_to_regno_p (i
, i
+1,
1744 current_function_return_rtx
,
1747 enum rtx_code code
= global_regs
[i
] ? SET
: CLOBBER
;
1748 /* We do not want REG_UNUSED notes for these registers. */
1749 mark_set_1 (pbi
, code
, regno_reg_rtx
[i
], cond
, insn
,
1750 pbi
->flags
& ~(PROP_DEATH_NOTES
| PROP_REG_INFO
));
1754 /* If an insn doesn't use CC0, it becomes dead since we assume
1755 that every insn clobbers it. So show it dead here;
1756 mark_used_regs will set it live if it is referenced. */
1761 mark_used_regs (pbi
, PATTERN (insn
), NULL_RTX
, insn
);
1762 if ((flags
& PROP_EQUAL_NOTES
)
1763 && ((note
= find_reg_note (insn
, REG_EQUAL
, NULL_RTX
))
1764 || (note
= find_reg_note (insn
, REG_EQUIV
, NULL_RTX
))))
1765 mark_used_regs (pbi
, XEXP (note
, 0), NULL_RTX
, insn
);
1767 /* Sometimes we may have inserted something before INSN (such as a move)
1768 when we make an auto-inc. So ensure we will scan those insns. */
1770 prev
= PREV_INSN (insn
);
1773 if (! insn_is_dead
&& CALL_P (insn
))
1779 if (GET_CODE (PATTERN (insn
)) == COND_EXEC
)
1780 cond
= COND_EXEC_TEST (PATTERN (insn
));
1782 /* Calls use their arguments, and may clobber memory which
1783 address involves some register. */
1784 for (note
= CALL_INSN_FUNCTION_USAGE (insn
);
1786 note
= XEXP (note
, 1))
1787 /* We find USE or CLOBBER entities in a FUNCTION_USAGE list: both
1788 of which mark_used_regs knows how to handle. */
1789 mark_used_regs (pbi
, XEXP (XEXP (note
, 0), 0), cond
, insn
);
1791 /* The stack ptr is used (honorarily) by a CALL insn. */
1792 if ((flags
& PROP_REG_INFO
)
1793 && !REGNO_REG_SET_P (pbi
->reg_live
, STACK_POINTER_REGNUM
))
1794 reg_deaths
[STACK_POINTER_REGNUM
] = pbi
->insn_num
;
1795 SET_REGNO_REG_SET (pbi
->reg_live
, STACK_POINTER_REGNUM
);
1797 /* Calls may also reference any of the global registers,
1798 so they are made live. */
1799 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
1801 mark_used_reg (pbi
, regno_reg_rtx
[i
], cond
, insn
);
1810 /* Initialize a propagate_block_info struct for public consumption.
1811 Note that the structure itself is opaque to this file, but that
1812 the user can use the regsets provided here. */
1814 struct propagate_block_info
*
1815 init_propagate_block_info (basic_block bb
, regset live
, regset local_set
,
1816 regset cond_local_set
, int flags
)
1818 struct propagate_block_info
*pbi
= xmalloc (sizeof (*pbi
));
1821 pbi
->reg_live
= live
;
1822 pbi
->mem_set_list
= NULL_RTX
;
1823 pbi
->mem_set_list_len
= 0;
1824 pbi
->local_set
= local_set
;
1825 pbi
->cond_local_set
= cond_local_set
;
1830 if (flags
& (PROP_LOG_LINKS
| PROP_AUTOINC
))
1831 pbi
->reg_next_use
= xcalloc (max_reg_num (), sizeof (rtx
));
1833 pbi
->reg_next_use
= NULL
;
1835 pbi
->new_set
= BITMAP_XMALLOC ();
1837 #ifdef HAVE_conditional_execution
1838 pbi
->reg_cond_dead
= splay_tree_new (splay_tree_compare_ints
, NULL
,
1839 free_reg_cond_life_info
);
1840 pbi
->reg_cond_reg
= BITMAP_XMALLOC ();
1842 /* If this block ends in a conditional branch, for each register
1843 live from one side of the branch and not the other, record the
1844 register as conditionally dead. */
1845 if (JUMP_P (BB_END (bb
))
1846 && any_condjump_p (BB_END (bb
)))
1848 regset diff
= ALLOC_REG_SET (®_obstack
);
1849 basic_block bb_true
, bb_false
;
1852 /* Identify the successor blocks. */
1853 bb_true
= EDGE_SUCC (bb
, 0)->dest
;
1854 if (EDGE_COUNT (bb
->succs
) > 1)
1856 bb_false
= EDGE_SUCC (bb
, 1)->dest
;
1858 if (EDGE_SUCC (bb
, 0)->flags
& EDGE_FALLTHRU
)
1860 basic_block t
= bb_false
;
1865 gcc_assert (EDGE_SUCC (bb
, 1)->flags
& EDGE_FALLTHRU
);
1869 /* This can happen with a conditional jump to the next insn. */
1870 gcc_assert (JUMP_LABEL (BB_END (bb
)) == BB_HEAD (bb_true
));
1872 /* Simplest way to do nothing. */
1876 /* Compute which register lead different lives in the successors. */
1877 bitmap_xor (diff
, bb_true
->global_live_at_start
,
1878 bb_false
->global_live_at_start
);
1880 if (!bitmap_empty_p (diff
))
1882 /* Extract the condition from the branch. */
1883 rtx set_src
= SET_SRC (pc_set (BB_END (bb
)));
1884 rtx cond_true
= XEXP (set_src
, 0);
1885 rtx reg
= XEXP (cond_true
, 0);
1886 enum rtx_code inv_cond
;
1888 if (GET_CODE (reg
) == SUBREG
)
1889 reg
= SUBREG_REG (reg
);
1891 /* We can only track conditional lifetimes if the condition is
1892 in the form of a reversible comparison of a register against
1893 zero. If the condition is more complex than that, then it is
1894 safe not to record any information. */
1895 inv_cond
= reversed_comparison_code (cond_true
, BB_END (bb
));
1896 if (inv_cond
!= UNKNOWN
1898 && XEXP (cond_true
, 1) == const0_rtx
)
1901 = gen_rtx_fmt_ee (inv_cond
,
1902 GET_MODE (cond_true
), XEXP (cond_true
, 0),
1903 XEXP (cond_true
, 1));
1904 reg_set_iterator rsi
;
1906 if (GET_CODE (XEXP (set_src
, 1)) == PC
)
1909 cond_false
= cond_true
;
1913 SET_REGNO_REG_SET (pbi
->reg_cond_reg
, REGNO (reg
));
1915 /* For each such register, mark it conditionally dead. */
1916 EXECUTE_IF_SET_IN_REG_SET (diff
, 0, i
, rsi
)
1918 struct reg_cond_life_info
*rcli
;
1921 rcli
= xmalloc (sizeof (*rcli
));
1923 if (REGNO_REG_SET_P (bb_true
->global_live_at_start
, i
))
1927 rcli
->condition
= cond
;
1928 rcli
->stores
= const0_rtx
;
1929 rcli
->orig_condition
= cond
;
1931 splay_tree_insert (pbi
->reg_cond_dead
, i
,
1932 (splay_tree_value
) rcli
);
1937 FREE_REG_SET (diff
);
1941 /* If this block has no successors, any stores to the frame that aren't
1942 used later in the block are dead. So make a pass over the block
1943 recording any such that are made and show them dead at the end. We do
1944 a very conservative and simple job here. */
1946 && ! (TREE_CODE (TREE_TYPE (current_function_decl
)) == FUNCTION_TYPE
1947 && (TYPE_RETURNS_STACK_DEPRESSED
1948 (TREE_TYPE (current_function_decl
))))
1949 && (flags
& PROP_SCAN_DEAD_STORES
)
1950 && (EDGE_COUNT (bb
->succs
) == 0
1951 || (EDGE_COUNT (bb
->succs
) == 1
1952 && EDGE_SUCC (bb
, 0)->dest
== EXIT_BLOCK_PTR
1953 && ! current_function_calls_eh_return
)))
1956 for (insn
= BB_END (bb
); insn
!= BB_HEAD (bb
); insn
= PREV_INSN (insn
))
1957 if (NONJUMP_INSN_P (insn
)
1958 && (set
= single_set (insn
))
1959 && MEM_P (SET_DEST (set
)))
1961 rtx mem
= SET_DEST (set
);
1962 rtx canon_mem
= canon_rtx (mem
);
1964 if (XEXP (canon_mem
, 0) == frame_pointer_rtx
1965 || (GET_CODE (XEXP (canon_mem
, 0)) == PLUS
1966 && XEXP (XEXP (canon_mem
, 0), 0) == frame_pointer_rtx
1967 && GET_CODE (XEXP (XEXP (canon_mem
, 0), 1)) == CONST_INT
))
1968 add_to_mem_set_list (pbi
, canon_mem
);
1975 /* Release a propagate_block_info struct. */
1978 free_propagate_block_info (struct propagate_block_info
*pbi
)
1980 free_EXPR_LIST_list (&pbi
->mem_set_list
);
1982 BITMAP_XFREE (pbi
->new_set
);
1984 #ifdef HAVE_conditional_execution
1985 splay_tree_delete (pbi
->reg_cond_dead
);
1986 BITMAP_XFREE (pbi
->reg_cond_reg
);
1989 if (pbi
->flags
& PROP_REG_INFO
)
1991 int num
= pbi
->insn_num
;
1993 reg_set_iterator rsi
;
1995 EXECUTE_IF_SET_IN_REG_SET (pbi
->reg_live
, 0, i
, rsi
)
1997 REG_LIVE_LENGTH (i
) += num
- reg_deaths
[i
];
2001 if (pbi
->reg_next_use
)
2002 free (pbi
->reg_next_use
);
2007 /* Compute the registers live at the beginning of a basic block BB from
2008 those live at the end.
2010 When called, REG_LIVE contains those live at the end. On return, it
2011 contains those live at the beginning.
2013 LOCAL_SET, if non-null, will be set with all registers killed
2014 unconditionally by this basic block.
2015 Likewise, COND_LOCAL_SET, if non-null, will be set with all registers
2016 killed conditionally by this basic block. If there is any unconditional
2017 set of a register, then the corresponding bit will be set in LOCAL_SET
2018 and cleared in COND_LOCAL_SET.
2019 It is valid for LOCAL_SET and COND_LOCAL_SET to be the same set. In this
2020 case, the resulting set will be equal to the union of the two sets that
2021 would otherwise be computed.
2023 Return nonzero if an INSN is deleted (i.e. by dead code removal). */
2026 propagate_block (basic_block bb
, regset live
, regset local_set
,
2027 regset cond_local_set
, int flags
)
2029 struct propagate_block_info
*pbi
;
2033 pbi
= init_propagate_block_info (bb
, live
, local_set
, cond_local_set
, flags
);
2035 if (flags
& PROP_REG_INFO
)
2038 reg_set_iterator rsi
;
2040 /* Process the regs live at the end of the block.
2041 Mark them as not local to any one basic block. */
2042 EXECUTE_IF_SET_IN_REG_SET (live
, 0, i
, rsi
)
2043 REG_BASIC_BLOCK (i
) = REG_BLOCK_GLOBAL
;
2046 /* Scan the block an insn at a time from end to beginning. */
2049 for (insn
= BB_END (bb
); ; insn
= prev
)
2051 /* If this is a call to `setjmp' et al, warn if any
2052 non-volatile datum is live. */
2053 if ((flags
& PROP_REG_INFO
)
2055 && find_reg_note (insn
, REG_SETJMP
, NULL
))
2056 IOR_REG_SET (regs_live_at_setjmp
, pbi
->reg_live
);
2058 prev
= propagate_one_insn (pbi
, insn
);
2060 changed
|= insn
!= get_insns ();
2062 changed
|= NEXT_INSN (prev
) != insn
;
2064 if (insn
== BB_HEAD (bb
))
2068 free_propagate_block_info (pbi
);
2073 /* Return 1 if X (the body of an insn, or part of it) is just dead stores
2074 (SET expressions whose destinations are registers dead after the insn).
2075 NEEDED is the regset that says which regs are alive after the insn.
2077 Unless CALL_OK is nonzero, an insn is needed if it contains a CALL.
2079 If X is the entire body of an insn, NOTES contains the reg notes
2080 pertaining to the insn. */
2083 insn_dead_p (struct propagate_block_info
*pbi
, rtx x
, int call_ok
,
2084 rtx notes ATTRIBUTE_UNUSED
)
2086 enum rtx_code code
= GET_CODE (x
);
2088 /* Don't eliminate insns that may trap. */
2089 if (flag_non_call_exceptions
&& may_trap_p (x
))
2093 /* As flow is invoked after combine, we must take existing AUTO_INC
2094 expressions into account. */
2095 for (; notes
; notes
= XEXP (notes
, 1))
2097 if (REG_NOTE_KIND (notes
) == REG_INC
)
2099 int regno
= REGNO (XEXP (notes
, 0));
2101 /* Don't delete insns to set global regs. */
2102 if ((regno
< FIRST_PSEUDO_REGISTER
&& global_regs
[regno
])
2103 || REGNO_REG_SET_P (pbi
->reg_live
, regno
))
2109 /* If setting something that's a reg or part of one,
2110 see if that register's altered value will be live. */
2114 rtx r
= SET_DEST (x
);
2117 if (GET_CODE (r
) == CC0
)
2118 return ! pbi
->cc0_live
;
2121 /* A SET that is a subroutine call cannot be dead. */
2122 if (GET_CODE (SET_SRC (x
)) == CALL
)
2128 /* Don't eliminate loads from volatile memory or volatile asms. */
2129 else if (volatile_refs_p (SET_SRC (x
)))
2136 if (MEM_VOLATILE_P (r
) || GET_MODE (r
) == BLKmode
)
2139 canon_r
= canon_rtx (r
);
2141 /* Walk the set of memory locations we are currently tracking
2142 and see if one is an identical match to this memory location.
2143 If so, this memory write is dead (remember, we're walking
2144 backwards from the end of the block to the start). Since
2145 rtx_equal_p does not check the alias set or flags, we also
2146 must have the potential for them to conflict (anti_dependence). */
2147 for (temp
= pbi
->mem_set_list
; temp
!= 0; temp
= XEXP (temp
, 1))
2148 if (anti_dependence (r
, XEXP (temp
, 0)))
2150 rtx mem
= XEXP (temp
, 0);
2152 if (rtx_equal_p (XEXP (canon_r
, 0), XEXP (mem
, 0))
2153 && (GET_MODE_SIZE (GET_MODE (canon_r
))
2154 <= GET_MODE_SIZE (GET_MODE (mem
))))
2158 /* Check if memory reference matches an auto increment. Only
2159 post increment/decrement or modify are valid. */
2160 if (GET_MODE (mem
) == GET_MODE (r
)
2161 && (GET_CODE (XEXP (mem
, 0)) == POST_DEC
2162 || GET_CODE (XEXP (mem
, 0)) == POST_INC
2163 || GET_CODE (XEXP (mem
, 0)) == POST_MODIFY
)
2164 && GET_MODE (XEXP (mem
, 0)) == GET_MODE (r
)
2165 && rtx_equal_p (XEXP (XEXP (mem
, 0), 0), XEXP (r
, 0)))
2172 while (GET_CODE (r
) == SUBREG
2173 || GET_CODE (r
) == STRICT_LOW_PART
2174 || GET_CODE (r
) == ZERO_EXTRACT
)
2179 int regno
= REGNO (r
);
2182 if (REGNO_REG_SET_P (pbi
->reg_live
, regno
))
2185 /* If this is a hard register, verify that subsequent
2186 words are not needed. */
2187 if (regno
< FIRST_PSEUDO_REGISTER
)
2189 int n
= hard_regno_nregs
[regno
][GET_MODE (r
)];
2192 if (REGNO_REG_SET_P (pbi
->reg_live
, regno
+n
))
2196 /* Don't delete insns to set global regs. */
2197 if (regno
< FIRST_PSEUDO_REGISTER
&& global_regs
[regno
])
2200 /* Make sure insns to set the stack pointer aren't deleted. */
2201 if (regno
== STACK_POINTER_REGNUM
)
2204 /* ??? These bits might be redundant with the force live bits
2205 in calculate_global_regs_live. We would delete from
2206 sequential sets; whether this actually affects real code
2207 for anything but the stack pointer I don't know. */
2208 /* Make sure insns to set the frame pointer aren't deleted. */
2209 if (regno
== FRAME_POINTER_REGNUM
2210 && (! reload_completed
|| frame_pointer_needed
))
2212 #if FRAME_POINTER_REGNUM != HARD_FRAME_POINTER_REGNUM
2213 if (regno
== HARD_FRAME_POINTER_REGNUM
2214 && (! reload_completed
|| frame_pointer_needed
))
2218 #if FRAME_POINTER_REGNUM != ARG_POINTER_REGNUM
2219 /* Make sure insns to set arg pointer are never deleted
2220 (if the arg pointer isn't fixed, there will be a USE
2221 for it, so we can treat it normally). */
2222 if (regno
== ARG_POINTER_REGNUM
&& fixed_regs
[regno
])
2226 /* Otherwise, the set is dead. */
2232 /* If performing several activities, insn is dead if each activity
2233 is individually dead. Also, CLOBBERs and USEs can be ignored; a
2234 CLOBBER or USE that's inside a PARALLEL doesn't make the insn
2236 else if (code
== PARALLEL
)
2238 int i
= XVECLEN (x
, 0);
2240 for (i
--; i
>= 0; i
--)
2241 if (GET_CODE (XVECEXP (x
, 0, i
)) != CLOBBER
2242 && GET_CODE (XVECEXP (x
, 0, i
)) != USE
2243 && ! insn_dead_p (pbi
, XVECEXP (x
, 0, i
), call_ok
, NULL_RTX
))
2249 /* A CLOBBER of a pseudo-register that is dead serves no purpose. That
2250 is not necessarily true for hard registers until after reload. */
2251 else if (code
== CLOBBER
)
2253 if (REG_P (XEXP (x
, 0))
2254 && (REGNO (XEXP (x
, 0)) >= FIRST_PSEUDO_REGISTER
2255 || reload_completed
)
2256 && ! REGNO_REG_SET_P (pbi
->reg_live
, REGNO (XEXP (x
, 0))))
2260 /* ??? A base USE is a historical relic. It ought not be needed anymore.
2261 Instances where it is still used are either (1) temporary and the USE
2262 escaped the pass, (2) cruft and the USE need not be emitted anymore,
2263 or (3) hiding bugs elsewhere that are not properly representing data
2269 /* If INSN is the last insn in a libcall, and assuming INSN is dead,
2270 return 1 if the entire library call is dead.
2271 This is true if INSN copies a register (hard or pseudo)
2272 and if the hard return reg of the call insn is dead.
2273 (The caller should have tested the destination of the SET inside
2274 INSN already for death.)
2276 If this insn doesn't just copy a register, then we don't
2277 have an ordinary libcall. In that case, cse could not have
2278 managed to substitute the source for the dest later on,
2279 so we can assume the libcall is dead.
2281 PBI is the block info giving pseudoregs live before this insn.
2282 NOTE is the REG_RETVAL note of the insn. */
2285 libcall_dead_p (struct propagate_block_info
*pbi
, rtx note
, rtx insn
)
2287 rtx x
= single_set (insn
);
2291 rtx r
= SET_SRC (x
);
2295 rtx call
= XEXP (note
, 0);
2299 /* Find the call insn. */
2300 while (call
!= insn
&& !CALL_P (call
))
2301 call
= NEXT_INSN (call
);
2303 /* If there is none, do nothing special,
2304 since ordinary death handling can understand these insns. */
2308 /* See if the hard reg holding the value is dead.
2309 If this is a PARALLEL, find the call within it. */
2310 call_pat
= PATTERN (call
);
2311 if (GET_CODE (call_pat
) == PARALLEL
)
2313 for (i
= XVECLEN (call_pat
, 0) - 1; i
>= 0; i
--)
2314 if (GET_CODE (XVECEXP (call_pat
, 0, i
)) == SET
2315 && GET_CODE (SET_SRC (XVECEXP (call_pat
, 0, i
))) == CALL
)
2318 /* This may be a library call that is returning a value
2319 via invisible pointer. Do nothing special, since
2320 ordinary death handling can understand these insns. */
2324 call_pat
= XVECEXP (call_pat
, 0, i
);
2327 return insn_dead_p (pbi
, call_pat
, 1, REG_NOTES (call
));
2333 /* 1 if register REGNO was alive at a place where `setjmp' was called
2334 and was set more than once or is an argument.
2335 Such regs may be clobbered by `longjmp'. */
2338 regno_clobbered_at_setjmp (int regno
)
2340 if (n_basic_blocks
== 0)
2343 return ((REG_N_SETS (regno
) > 1
2344 || REGNO_REG_SET_P (ENTRY_BLOCK_PTR
->global_live_at_end
, regno
))
2345 && REGNO_REG_SET_P (regs_live_at_setjmp
, regno
));
2348 /* Add MEM to PBI->MEM_SET_LIST. MEM should be canonical. Respect the
2349 maximal list size; look for overlaps in mode and select the largest. */
2351 add_to_mem_set_list (struct propagate_block_info
*pbi
, rtx mem
)
2355 /* We don't know how large a BLKmode store is, so we must not
2356 take them into consideration. */
2357 if (GET_MODE (mem
) == BLKmode
)
2360 for (i
= pbi
->mem_set_list
; i
; i
= XEXP (i
, 1))
2362 rtx e
= XEXP (i
, 0);
2363 if (rtx_equal_p (XEXP (mem
, 0), XEXP (e
, 0)))
2365 if (GET_MODE_SIZE (GET_MODE (mem
)) > GET_MODE_SIZE (GET_MODE (e
)))
2368 /* If we must store a copy of the mem, we can just modify
2369 the mode of the stored copy. */
2370 if (pbi
->flags
& PROP_AUTOINC
)
2371 PUT_MODE (e
, GET_MODE (mem
));
2380 if (pbi
->mem_set_list_len
< MAX_MEM_SET_LIST_LEN
)
2383 /* Store a copy of mem, otherwise the address may be
2384 scrogged by find_auto_inc. */
2385 if (pbi
->flags
& PROP_AUTOINC
)
2386 mem
= shallow_copy_rtx (mem
);
2388 pbi
->mem_set_list
= alloc_EXPR_LIST (0, mem
, pbi
->mem_set_list
);
2389 pbi
->mem_set_list_len
++;
2393 /* INSN references memory, possibly using autoincrement addressing modes.
2394 Find any entries on the mem_set_list that need to be invalidated due
2395 to an address change. */
2398 invalidate_mems_from_autoinc (rtx
*px
, void *data
)
2401 struct propagate_block_info
*pbi
= data
;
2403 if (GET_RTX_CLASS (GET_CODE (x
)) == RTX_AUTOINC
)
2405 invalidate_mems_from_set (pbi
, XEXP (x
, 0));
2412 /* EXP is a REG. Remove any dependent entries from pbi->mem_set_list. */
2415 invalidate_mems_from_set (struct propagate_block_info
*pbi
, rtx exp
)
2417 rtx temp
= pbi
->mem_set_list
;
2418 rtx prev
= NULL_RTX
;
2423 next
= XEXP (temp
, 1);
2424 if (reg_overlap_mentioned_p (exp
, XEXP (temp
, 0)))
2426 /* Splice this entry out of the list. */
2428 XEXP (prev
, 1) = next
;
2430 pbi
->mem_set_list
= next
;
2431 free_EXPR_LIST_node (temp
);
2432 pbi
->mem_set_list_len
--;
2440 /* Process the registers that are set within X. Their bits are set to
2441 1 in the regset DEAD, because they are dead prior to this insn.
2443 If INSN is nonzero, it is the insn being processed.
2445 FLAGS is the set of operations to perform. */
2448 mark_set_regs (struct propagate_block_info
*pbi
, rtx x
, rtx insn
)
2450 rtx cond
= NULL_RTX
;
2453 int flags
= pbi
->flags
;
2456 for (link
= REG_NOTES (insn
); link
; link
= XEXP (link
, 1))
2458 if (REG_NOTE_KIND (link
) == REG_INC
)
2459 mark_set_1 (pbi
, SET
, XEXP (link
, 0),
2460 (GET_CODE (x
) == COND_EXEC
2461 ? COND_EXEC_TEST (x
) : NULL_RTX
),
2465 switch (code
= GET_CODE (x
))
2468 if (GET_CODE (XEXP (x
, 1)) == ASM_OPERANDS
)
2469 flags
|= PROP_ASM_SCAN
;
2472 mark_set_1 (pbi
, code
, SET_DEST (x
), cond
, insn
, flags
);
2476 cond
= COND_EXEC_TEST (x
);
2477 x
= COND_EXEC_CODE (x
);
2484 /* We must scan forwards. If we have an asm, we need to set
2485 the PROP_ASM_SCAN flag before scanning the clobbers. */
2486 for (i
= 0; i
< XVECLEN (x
, 0); i
++)
2488 rtx sub
= XVECEXP (x
, 0, i
);
2489 switch (code
= GET_CODE (sub
))
2494 cond
= COND_EXEC_TEST (sub
);
2495 sub
= COND_EXEC_CODE (sub
);
2496 if (GET_CODE (sub
) == SET
)
2498 if (GET_CODE (sub
) == CLOBBER
)
2504 if (GET_CODE (XEXP (sub
, 1)) == ASM_OPERANDS
)
2505 flags
|= PROP_ASM_SCAN
;
2509 mark_set_1 (pbi
, code
, SET_DEST (sub
), cond
, insn
, flags
);
2513 flags
|= PROP_ASM_SCAN
;
2528 /* Process a single set, which appears in INSN. REG (which may not
2529 actually be a REG, it may also be a SUBREG, PARALLEL, etc.) is
2530 being set using the CODE (which may be SET, CLOBBER, or COND_EXEC).
2531 If the set is conditional (because it appear in a COND_EXEC), COND
2532 will be the condition. */
2535 mark_set_1 (struct propagate_block_info
*pbi
, enum rtx_code code
, rtx reg
, rtx cond
, rtx insn
, int flags
)
2537 int regno_first
= -1, regno_last
= -1;
2538 unsigned long not_dead
= 0;
2541 /* Modifying just one hardware register of a multi-reg value or just a
2542 byte field of a register does not mean the value from before this insn
2543 is now dead. Of course, if it was dead after it's unused now. */
2545 switch (GET_CODE (reg
))
2548 /* Some targets place small structures in registers for return values of
2549 functions. We have to detect this case specially here to get correct
2550 flow information. */
2551 for (i
= XVECLEN (reg
, 0) - 1; i
>= 0; i
--)
2552 if (XEXP (XVECEXP (reg
, 0, i
), 0) != 0)
2553 mark_set_1 (pbi
, code
, XEXP (XVECEXP (reg
, 0, i
), 0), cond
, insn
,
2558 /* SIGN_EXTRACT cannot be an lvalue. */
2562 case STRICT_LOW_PART
:
2563 /* ??? Assumes STRICT_LOW_PART not used on multi-word registers. */
2565 reg
= XEXP (reg
, 0);
2566 while (GET_CODE (reg
) == SUBREG
2567 || GET_CODE (reg
) == ZERO_EXTRACT
2568 || GET_CODE (reg
) == STRICT_LOW_PART
);
2571 not_dead
= (unsigned long) REGNO_REG_SET_P (pbi
->reg_live
, REGNO (reg
));
2575 regno_last
= regno_first
= REGNO (reg
);
2576 if (regno_first
< FIRST_PSEUDO_REGISTER
)
2577 regno_last
+= hard_regno_nregs
[regno_first
][GET_MODE (reg
)] - 1;
2581 if (REG_P (SUBREG_REG (reg
)))
2583 enum machine_mode outer_mode
= GET_MODE (reg
);
2584 enum machine_mode inner_mode
= GET_MODE (SUBREG_REG (reg
));
2586 /* Identify the range of registers affected. This is moderately
2587 tricky for hard registers. See alter_subreg. */
2589 regno_last
= regno_first
= REGNO (SUBREG_REG (reg
));
2590 if (regno_first
< FIRST_PSEUDO_REGISTER
)
2592 regno_first
+= subreg_regno_offset (regno_first
, inner_mode
,
2595 regno_last
= (regno_first
2596 + hard_regno_nregs
[regno_first
][outer_mode
] - 1);
2598 /* Since we've just adjusted the register number ranges, make
2599 sure REG matches. Otherwise some_was_live will be clear
2600 when it shouldn't have been, and we'll create incorrect
2601 REG_UNUSED notes. */
2602 reg
= gen_rtx_REG (outer_mode
, regno_first
);
2606 /* If the number of words in the subreg is less than the number
2607 of words in the full register, we have a well-defined partial
2608 set. Otherwise the high bits are undefined.
2610 This is only really applicable to pseudos, since we just took
2611 care of multi-word hard registers. */
2612 if (((GET_MODE_SIZE (outer_mode
)
2613 + UNITS_PER_WORD
- 1) / UNITS_PER_WORD
)
2614 < ((GET_MODE_SIZE (inner_mode
)
2615 + UNITS_PER_WORD
- 1) / UNITS_PER_WORD
))
2616 not_dead
= (unsigned long) REGNO_REG_SET_P (pbi
->reg_live
,
2619 reg
= SUBREG_REG (reg
);
2623 reg
= SUBREG_REG (reg
);
2630 /* If this set is a MEM, then it kills any aliased writes.
2631 If this set is a REG, then it kills any MEMs which use the reg. */
2632 if (optimize
&& (flags
& PROP_SCAN_DEAD_STORES
))
2635 invalidate_mems_from_set (pbi
, reg
);
2637 /* If the memory reference had embedded side effects (autoincrement
2638 address modes) then we may need to kill some entries on the
2640 if (insn
&& MEM_P (reg
))
2641 for_each_rtx (&PATTERN (insn
), invalidate_mems_from_autoinc
, pbi
);
2643 if (MEM_P (reg
) && ! side_effects_p (reg
)
2644 /* ??? With more effort we could track conditional memory life. */
2646 add_to_mem_set_list (pbi
, canon_rtx (reg
));
2650 && ! (regno_first
== FRAME_POINTER_REGNUM
2651 && (! reload_completed
|| frame_pointer_needed
))
2652 #if FRAME_POINTER_REGNUM != HARD_FRAME_POINTER_REGNUM
2653 && ! (regno_first
== HARD_FRAME_POINTER_REGNUM
2654 && (! reload_completed
|| frame_pointer_needed
))
2656 #if FRAME_POINTER_REGNUM != ARG_POINTER_REGNUM
2657 && ! (regno_first
== ARG_POINTER_REGNUM
&& fixed_regs
[regno_first
])
2661 int some_was_live
= 0, some_was_dead
= 0;
2663 for (i
= regno_first
; i
<= regno_last
; ++i
)
2665 int needed_regno
= REGNO_REG_SET_P (pbi
->reg_live
, i
);
2668 /* Order of the set operation matters here since both
2669 sets may be the same. */
2670 CLEAR_REGNO_REG_SET (pbi
->cond_local_set
, i
);
2671 if (cond
!= NULL_RTX
2672 && ! REGNO_REG_SET_P (pbi
->local_set
, i
))
2673 SET_REGNO_REG_SET (pbi
->cond_local_set
, i
);
2675 SET_REGNO_REG_SET (pbi
->local_set
, i
);
2677 if (code
!= CLOBBER
)
2678 SET_REGNO_REG_SET (pbi
->new_set
, i
);
2680 some_was_live
|= needed_regno
;
2681 some_was_dead
|= ! needed_regno
;
2684 #ifdef HAVE_conditional_execution
2685 /* Consider conditional death in deciding that the register needs
2687 if (some_was_live
&& ! not_dead
2688 /* The stack pointer is never dead. Well, not strictly true,
2689 but it's very difficult to tell from here. Hopefully
2690 combine_stack_adjustments will fix up the most egregious
2692 && regno_first
!= STACK_POINTER_REGNUM
)
2694 for (i
= regno_first
; i
<= regno_last
; ++i
)
2695 if (! mark_regno_cond_dead (pbi
, i
, cond
))
2696 not_dead
|= ((unsigned long) 1) << (i
- regno_first
);
2700 /* Additional data to record if this is the final pass. */
2701 if (flags
& (PROP_LOG_LINKS
| PROP_REG_INFO
2702 | PROP_DEATH_NOTES
| PROP_AUTOINC
))
2705 int blocknum
= pbi
->bb
->index
;
2708 if (flags
& (PROP_LOG_LINKS
| PROP_AUTOINC
))
2710 y
= pbi
->reg_next_use
[regno_first
];
2712 /* The next use is no longer next, since a store intervenes. */
2713 for (i
= regno_first
; i
<= regno_last
; ++i
)
2714 pbi
->reg_next_use
[i
] = 0;
2717 if (flags
& PROP_REG_INFO
)
2719 for (i
= regno_first
; i
<= regno_last
; ++i
)
2721 /* Count (weighted) references, stores, etc. This counts a
2722 register twice if it is modified, but that is correct. */
2723 REG_N_SETS (i
) += 1;
2724 REG_N_REFS (i
) += 1;
2725 REG_FREQ (i
) += REG_FREQ_FROM_BB (pbi
->bb
);
2727 /* The insns where a reg is live are normally counted
2728 elsewhere, but we want the count to include the insn
2729 where the reg is set, and the normal counting mechanism
2730 would not count it. */
2731 REG_LIVE_LENGTH (i
) += 1;
2734 /* If this is a hard reg, record this function uses the reg. */
2735 if (regno_first
< FIRST_PSEUDO_REGISTER
)
2737 for (i
= regno_first
; i
<= regno_last
; i
++)
2738 regs_ever_live
[i
] = 1;
2739 if (flags
& PROP_ASM_SCAN
)
2740 for (i
= regno_first
; i
<= regno_last
; i
++)
2741 regs_asm_clobbered
[i
] = 1;
2745 /* Keep track of which basic blocks each reg appears in. */
2746 if (REG_BASIC_BLOCK (regno_first
) == REG_BLOCK_UNKNOWN
)
2747 REG_BASIC_BLOCK (regno_first
) = blocknum
;
2748 else if (REG_BASIC_BLOCK (regno_first
) != blocknum
)
2749 REG_BASIC_BLOCK (regno_first
) = REG_BLOCK_GLOBAL
;
2753 if (! some_was_dead
)
2755 if (flags
& PROP_LOG_LINKS
)
2757 /* Make a logical link from the next following insn
2758 that uses this register, back to this insn.
2759 The following insns have already been processed.
2761 We don't build a LOG_LINK for hard registers containing
2762 in ASM_OPERANDs. If these registers get replaced,
2763 we might wind up changing the semantics of the insn,
2764 even if reload can make what appear to be valid
2767 We don't build a LOG_LINK for global registers to
2768 or from a function call. We don't want to let
2769 combine think that it knows what is going on with
2770 global registers. */
2771 if (y
&& (BLOCK_NUM (y
) == blocknum
)
2772 && (regno_first
>= FIRST_PSEUDO_REGISTER
2773 || (asm_noperands (PATTERN (y
)) < 0
2774 && ! ((CALL_P (insn
)
2776 && global_regs
[regno_first
]))))
2777 LOG_LINKS (y
) = alloc_INSN_LIST (insn
, LOG_LINKS (y
));
2782 else if (! some_was_live
)
2784 if (flags
& PROP_REG_INFO
)
2785 REG_N_DEATHS (regno_first
) += 1;
2787 if (flags
& PROP_DEATH_NOTES
)
2789 /* Note that dead stores have already been deleted
2790 when possible. If we get here, we have found a
2791 dead store that cannot be eliminated (because the
2792 same insn does something useful). Indicate this
2793 by marking the reg being set as dying here. */
2795 = alloc_EXPR_LIST (REG_UNUSED
, reg
, REG_NOTES (insn
));
2800 if (flags
& PROP_DEATH_NOTES
)
2802 /* This is a case where we have a multi-word hard register
2803 and some, but not all, of the words of the register are
2804 needed in subsequent insns. Write REG_UNUSED notes
2805 for those parts that were not needed. This case should
2808 for (i
= regno_first
; i
<= regno_last
; ++i
)
2809 if (! REGNO_REG_SET_P (pbi
->reg_live
, i
))
2811 = alloc_EXPR_LIST (REG_UNUSED
,
2818 /* Mark the register as being dead. */
2820 /* The stack pointer is never dead. Well, not strictly true,
2821 but it's very difficult to tell from here. Hopefully
2822 combine_stack_adjustments will fix up the most egregious
2824 && regno_first
!= STACK_POINTER_REGNUM
)
2826 for (i
= regno_first
; i
<= regno_last
; ++i
)
2827 if (!(not_dead
& (((unsigned long) 1) << (i
- regno_first
))))
2829 if ((pbi
->flags
& PROP_REG_INFO
)
2830 && REGNO_REG_SET_P (pbi
->reg_live
, i
))
2832 REG_LIVE_LENGTH (i
) += pbi
->insn_num
- reg_deaths
[i
];
2835 CLEAR_REGNO_REG_SET (pbi
->reg_live
, i
);
2839 else if (REG_P (reg
))
2841 if (flags
& (PROP_LOG_LINKS
| PROP_AUTOINC
))
2842 pbi
->reg_next_use
[regno_first
] = 0;
2844 if ((flags
& PROP_REG_INFO
) != 0
2845 && (flags
& PROP_ASM_SCAN
) != 0
2846 && regno_first
< FIRST_PSEUDO_REGISTER
)
2848 for (i
= regno_first
; i
<= regno_last
; i
++)
2849 regs_asm_clobbered
[i
] = 1;
2853 /* If this is the last pass and this is a SCRATCH, show it will be dying
2854 here and count it. */
2855 else if (GET_CODE (reg
) == SCRATCH
)
2857 if (flags
& PROP_DEATH_NOTES
)
2859 = alloc_EXPR_LIST (REG_UNUSED
, reg
, REG_NOTES (insn
));
2863 #ifdef HAVE_conditional_execution
2864 /* Mark REGNO conditionally dead.
2865 Return true if the register is now unconditionally dead. */
2868 mark_regno_cond_dead (struct propagate_block_info
*pbi
, int regno
, rtx cond
)
2870 /* If this is a store to a predicate register, the value of the
2871 predicate is changing, we don't know that the predicate as seen
2872 before is the same as that seen after. Flush all dependent
2873 conditions from reg_cond_dead. This will make all such
2874 conditionally live registers unconditionally live. */
2875 if (REGNO_REG_SET_P (pbi
->reg_cond_reg
, regno
))
2876 flush_reg_cond_reg (pbi
, regno
);
2878 /* If this is an unconditional store, remove any conditional
2879 life that may have existed. */
2880 if (cond
== NULL_RTX
)
2881 splay_tree_remove (pbi
->reg_cond_dead
, regno
);
2884 splay_tree_node node
;
2885 struct reg_cond_life_info
*rcli
;
2888 /* Otherwise this is a conditional set. Record that fact.
2889 It may have been conditionally used, or there may be a
2890 subsequent set with a complimentary condition. */
2892 node
= splay_tree_lookup (pbi
->reg_cond_dead
, regno
);
2895 /* The register was unconditionally live previously.
2896 Record the current condition as the condition under
2897 which it is dead. */
2898 rcli
= xmalloc (sizeof (*rcli
));
2899 rcli
->condition
= cond
;
2900 rcli
->stores
= cond
;
2901 rcli
->orig_condition
= const0_rtx
;
2902 splay_tree_insert (pbi
->reg_cond_dead
, regno
,
2903 (splay_tree_value
) rcli
);
2905 SET_REGNO_REG_SET (pbi
->reg_cond_reg
, REGNO (XEXP (cond
, 0)));
2907 /* Not unconditionally dead. */
2912 /* The register was conditionally live previously.
2913 Add the new condition to the old. */
2914 rcli
= (struct reg_cond_life_info
*) node
->value
;
2915 ncond
= rcli
->condition
;
2916 ncond
= ior_reg_cond (ncond
, cond
, 1);
2917 if (rcli
->stores
== const0_rtx
)
2918 rcli
->stores
= cond
;
2919 else if (rcli
->stores
!= const1_rtx
)
2920 rcli
->stores
= ior_reg_cond (rcli
->stores
, cond
, 1);
2922 /* If the register is now unconditionally dead, remove the entry
2923 in the splay_tree. A register is unconditionally dead if the
2924 dead condition ncond is true. A register is also unconditionally
2925 dead if the sum of all conditional stores is an unconditional
2926 store (stores is true), and the dead condition is identically the
2927 same as the original dead condition initialized at the end of
2928 the block. This is a pointer compare, not an rtx_equal_p
2930 if (ncond
== const1_rtx
2931 || (ncond
== rcli
->orig_condition
&& rcli
->stores
== const1_rtx
))
2932 splay_tree_remove (pbi
->reg_cond_dead
, regno
);
2935 rcli
->condition
= ncond
;
2937 SET_REGNO_REG_SET (pbi
->reg_cond_reg
, REGNO (XEXP (cond
, 0)));
2939 /* Not unconditionally dead. */
2948 /* Called from splay_tree_delete for pbi->reg_cond_life. */
2951 free_reg_cond_life_info (splay_tree_value value
)
2953 struct reg_cond_life_info
*rcli
= (struct reg_cond_life_info
*) value
;
2957 /* Helper function for flush_reg_cond_reg. */
2960 flush_reg_cond_reg_1 (splay_tree_node node
, void *data
)
2962 struct reg_cond_life_info
*rcli
;
2963 int *xdata
= (int *) data
;
2964 unsigned int regno
= xdata
[0];
2966 /* Don't need to search if last flushed value was farther on in
2967 the in-order traversal. */
2968 if (xdata
[1] >= (int) node
->key
)
2971 /* Splice out portions of the expression that refer to regno. */
2972 rcli
= (struct reg_cond_life_info
*) node
->value
;
2973 rcli
->condition
= elim_reg_cond (rcli
->condition
, regno
);
2974 if (rcli
->stores
!= const0_rtx
&& rcli
->stores
!= const1_rtx
)
2975 rcli
->stores
= elim_reg_cond (rcli
->stores
, regno
);
2977 /* If the entire condition is now false, signal the node to be removed. */
2978 if (rcli
->condition
== const0_rtx
)
2980 xdata
[1] = node
->key
;
2984 gcc_assert (rcli
->condition
!= const1_rtx
);
2989 /* Flush all (sub) expressions referring to REGNO from REG_COND_LIVE. */
2992 flush_reg_cond_reg (struct propagate_block_info
*pbi
, int regno
)
2998 while (splay_tree_foreach (pbi
->reg_cond_dead
,
2999 flush_reg_cond_reg_1
, pair
) == -1)
3000 splay_tree_remove (pbi
->reg_cond_dead
, pair
[1]);
3002 CLEAR_REGNO_REG_SET (pbi
->reg_cond_reg
, regno
);
3005 /* Logical arithmetic on predicate conditions. IOR, NOT and AND.
3006 For ior/and, the ADD flag determines whether we want to add the new
3007 condition X to the old one unconditionally. If it is zero, we will
3008 only return a new expression if X allows us to simplify part of
3009 OLD, otherwise we return NULL to the caller.
3010 If ADD is nonzero, we will return a new condition in all cases. The
3011 toplevel caller of one of these functions should always pass 1 for
3015 ior_reg_cond (rtx old
, rtx x
, int add
)
3019 if (COMPARISON_P (old
))
3021 if (COMPARISON_P (x
)
3022 && REVERSE_CONDEXEC_PREDICATES_P (x
, old
)
3023 && REGNO (XEXP (x
, 0)) == REGNO (XEXP (old
, 0)))
3025 if (GET_CODE (x
) == GET_CODE (old
)
3026 && REGNO (XEXP (x
, 0)) == REGNO (XEXP (old
, 0)))
3030 return gen_rtx_IOR (0, old
, x
);
3033 switch (GET_CODE (old
))
3036 op0
= ior_reg_cond (XEXP (old
, 0), x
, 0);
3037 op1
= ior_reg_cond (XEXP (old
, 1), x
, 0);
3038 if (op0
!= NULL
|| op1
!= NULL
)
3040 if (op0
== const0_rtx
)
3041 return op1
? op1
: gen_rtx_IOR (0, XEXP (old
, 1), x
);
3042 if (op1
== const0_rtx
)
3043 return op0
? op0
: gen_rtx_IOR (0, XEXP (old
, 0), x
);
3044 if (op0
== const1_rtx
|| op1
== const1_rtx
)
3047 op0
= gen_rtx_IOR (0, XEXP (old
, 0), x
);
3048 else if (rtx_equal_p (x
, op0
))
3049 /* (x | A) | x ~ (x | A). */
3052 op1
= gen_rtx_IOR (0, XEXP (old
, 1), x
);
3053 else if (rtx_equal_p (x
, op1
))
3054 /* (A | x) | x ~ (A | x). */
3056 return gen_rtx_IOR (0, op0
, op1
);
3060 return gen_rtx_IOR (0, old
, x
);
3063 op0
= ior_reg_cond (XEXP (old
, 0), x
, 0);
3064 op1
= ior_reg_cond (XEXP (old
, 1), x
, 0);
3065 if (op0
!= NULL
|| op1
!= NULL
)
3067 if (op0
== const1_rtx
)
3068 return op1
? op1
: gen_rtx_IOR (0, XEXP (old
, 1), x
);
3069 if (op1
== const1_rtx
)
3070 return op0
? op0
: gen_rtx_IOR (0, XEXP (old
, 0), x
);
3071 if (op0
== const0_rtx
|| op1
== const0_rtx
)
3074 op0
= gen_rtx_IOR (0, XEXP (old
, 0), x
);
3075 else if (rtx_equal_p (x
, op0
))
3076 /* (x & A) | x ~ x. */
3079 op1
= gen_rtx_IOR (0, XEXP (old
, 1), x
);
3080 else if (rtx_equal_p (x
, op1
))
3081 /* (A & x) | x ~ x. */
3083 return gen_rtx_AND (0, op0
, op1
);
3087 return gen_rtx_IOR (0, old
, x
);
3090 op0
= and_reg_cond (XEXP (old
, 0), not_reg_cond (x
), 0);
3092 return not_reg_cond (op0
);
3095 return gen_rtx_IOR (0, old
, x
);
3103 not_reg_cond (rtx x
)
3105 if (x
== const0_rtx
)
3107 else if (x
== const1_rtx
)
3109 if (GET_CODE (x
) == NOT
)
3111 if (COMPARISON_P (x
)
3112 && REG_P (XEXP (x
, 0)))
3114 gcc_assert (XEXP (x
, 1) == const0_rtx
);
3116 return gen_rtx_fmt_ee (reversed_comparison_code (x
, NULL
),
3117 VOIDmode
, XEXP (x
, 0), const0_rtx
);
3119 return gen_rtx_NOT (0, x
);
3123 and_reg_cond (rtx old
, rtx x
, int add
)
3127 if (COMPARISON_P (old
))
3129 if (COMPARISON_P (x
)
3130 && GET_CODE (x
) == reversed_comparison_code (old
, NULL
)
3131 && REGNO (XEXP (x
, 0)) == REGNO (XEXP (old
, 0)))
3133 if (GET_CODE (x
) == GET_CODE (old
)
3134 && REGNO (XEXP (x
, 0)) == REGNO (XEXP (old
, 0)))
3138 return gen_rtx_AND (0, old
, x
);
3141 switch (GET_CODE (old
))
3144 op0
= and_reg_cond (XEXP (old
, 0), x
, 0);
3145 op1
= and_reg_cond (XEXP (old
, 1), x
, 0);
3146 if (op0
!= NULL
|| op1
!= NULL
)
3148 if (op0
== const0_rtx
)
3149 return op1
? op1
: gen_rtx_AND (0, XEXP (old
, 1), x
);
3150 if (op1
== const0_rtx
)
3151 return op0
? op0
: gen_rtx_AND (0, XEXP (old
, 0), x
);
3152 if (op0
== const1_rtx
|| op1
== const1_rtx
)
3155 op0
= gen_rtx_AND (0, XEXP (old
, 0), x
);
3156 else if (rtx_equal_p (x
, op0
))
3157 /* (x | A) & x ~ x. */
3160 op1
= gen_rtx_AND (0, XEXP (old
, 1), x
);
3161 else if (rtx_equal_p (x
, op1
))
3162 /* (A | x) & x ~ x. */
3164 return gen_rtx_IOR (0, op0
, op1
);
3168 return gen_rtx_AND (0, old
, x
);
3171 op0
= and_reg_cond (XEXP (old
, 0), x
, 0);
3172 op1
= and_reg_cond (XEXP (old
, 1), x
, 0);
3173 if (op0
!= NULL
|| op1
!= NULL
)
3175 if (op0
== const1_rtx
)
3176 return op1
? op1
: gen_rtx_AND (0, XEXP (old
, 1), x
);
3177 if (op1
== const1_rtx
)
3178 return op0
? op0
: gen_rtx_AND (0, XEXP (old
, 0), x
);
3179 if (op0
== const0_rtx
|| op1
== const0_rtx
)
3182 op0
= gen_rtx_AND (0, XEXP (old
, 0), x
);
3183 else if (rtx_equal_p (x
, op0
))
3184 /* (x & A) & x ~ (x & A). */
3187 op1
= gen_rtx_AND (0, XEXP (old
, 1), x
);
3188 else if (rtx_equal_p (x
, op1
))
3189 /* (A & x) & x ~ (A & x). */
3191 return gen_rtx_AND (0, op0
, op1
);
3195 return gen_rtx_AND (0, old
, x
);
3198 op0
= ior_reg_cond (XEXP (old
, 0), not_reg_cond (x
), 0);
3200 return not_reg_cond (op0
);
3203 return gen_rtx_AND (0, old
, x
);
3210 /* Given a condition X, remove references to reg REGNO and return the
3211 new condition. The removal will be done so that all conditions
3212 involving REGNO are considered to evaluate to false. This function
3213 is used when the value of REGNO changes. */
3216 elim_reg_cond (rtx x
, unsigned int regno
)
3220 if (COMPARISON_P (x
))
3222 if (REGNO (XEXP (x
, 0)) == regno
)
3227 switch (GET_CODE (x
))
3230 op0
= elim_reg_cond (XEXP (x
, 0), regno
);
3231 op1
= elim_reg_cond (XEXP (x
, 1), regno
);
3232 if (op0
== const0_rtx
|| op1
== const0_rtx
)
3234 if (op0
== const1_rtx
)
3236 if (op1
== const1_rtx
)
3238 if (op0
== XEXP (x
, 0) && op1
== XEXP (x
, 1))
3240 return gen_rtx_AND (0, op0
, op1
);
3243 op0
= elim_reg_cond (XEXP (x
, 0), regno
);
3244 op1
= elim_reg_cond (XEXP (x
, 1), regno
);
3245 if (op0
== const1_rtx
|| op1
== const1_rtx
)
3247 if (op0
== const0_rtx
)
3249 if (op1
== const0_rtx
)
3251 if (op0
== XEXP (x
, 0) && op1
== XEXP (x
, 1))
3253 return gen_rtx_IOR (0, op0
, op1
);
3256 op0
= elim_reg_cond (XEXP (x
, 0), regno
);
3257 if (op0
== const0_rtx
)
3259 if (op0
== const1_rtx
)
3261 if (op0
!= XEXP (x
, 0))
3262 return not_reg_cond (op0
);
3269 #endif /* HAVE_conditional_execution */
3273 /* Try to substitute the auto-inc expression INC as the address inside
3274 MEM which occurs in INSN. Currently, the address of MEM is an expression
3275 involving INCR_REG, and INCR is the next use of INCR_REG; it is an insn
3276 that has a single set whose source is a PLUS of INCR_REG and something
3280 attempt_auto_inc (struct propagate_block_info
*pbi
, rtx inc
, rtx insn
,
3281 rtx mem
, rtx incr
, rtx incr_reg
)
3283 int regno
= REGNO (incr_reg
);
3284 rtx set
= single_set (incr
);
3285 rtx q
= SET_DEST (set
);
3286 rtx y
= SET_SRC (set
);
3287 int opnum
= XEXP (y
, 0) == incr_reg
? 0 : 1;
3290 /* Make sure this reg appears only once in this insn. */
3291 if (count_occurrences (PATTERN (insn
), incr_reg
, 1) != 1)
3294 if (dead_or_set_p (incr
, incr_reg
)
3295 /* Mustn't autoinc an eliminable register. */
3296 && (regno
>= FIRST_PSEUDO_REGISTER
3297 || ! TEST_HARD_REG_BIT (elim_reg_set
, regno
)))
3299 /* This is the simple case. Try to make the auto-inc. If
3300 we can't, we are done. Otherwise, we will do any
3301 needed updates below. */
3302 if (! validate_change (insn
, &XEXP (mem
, 0), inc
, 0))
3306 /* PREV_INSN used here to check the semi-open interval
3308 && ! reg_used_between_p (q
, PREV_INSN (insn
), incr
)
3309 /* We must also check for sets of q as q may be
3310 a call clobbered hard register and there may
3311 be a call between PREV_INSN (insn) and incr. */
3312 && ! reg_set_between_p (q
, PREV_INSN (insn
), incr
))
3314 /* We have *p followed sometime later by q = p+size.
3315 Both p and q must be live afterward,
3316 and q is not used between INSN and its assignment.
3317 Change it to q = p, ...*q..., q = q+size.
3318 Then fall into the usual case. */
3322 emit_move_insn (q
, incr_reg
);
3323 insns
= get_insns ();
3326 /* If we can't make the auto-inc, or can't make the
3327 replacement into Y, exit. There's no point in making
3328 the change below if we can't do the auto-inc and doing
3329 so is not correct in the pre-inc case. */
3332 validate_change (insn
, &XEXP (mem
, 0), inc
, 1);
3333 validate_change (incr
, &XEXP (y
, opnum
), q
, 1);
3334 if (! apply_change_group ())
3337 /* We now know we'll be doing this change, so emit the
3338 new insn(s) and do the updates. */
3339 emit_insn_before (insns
, insn
);
3341 if (BB_HEAD (pbi
->bb
) == insn
)
3342 BB_HEAD (pbi
->bb
) = insns
;
3344 /* INCR will become a NOTE and INSN won't contain a
3345 use of INCR_REG. If a use of INCR_REG was just placed in
3346 the insn before INSN, make that the next use.
3347 Otherwise, invalidate it. */
3348 if (NONJUMP_INSN_P (PREV_INSN (insn
))
3349 && GET_CODE (PATTERN (PREV_INSN (insn
))) == SET
3350 && SET_SRC (PATTERN (PREV_INSN (insn
))) == incr_reg
)
3351 pbi
->reg_next_use
[regno
] = PREV_INSN (insn
);
3353 pbi
->reg_next_use
[regno
] = 0;
3358 if ((pbi
->flags
& PROP_REG_INFO
)
3359 && !REGNO_REG_SET_P (pbi
->reg_live
, regno
))
3360 reg_deaths
[regno
] = pbi
->insn_num
;
3362 /* REGNO is now used in INCR which is below INSN, but
3363 it previously wasn't live here. If we don't mark
3364 it as live, we'll put a REG_DEAD note for it
3365 on this insn, which is incorrect. */
3366 SET_REGNO_REG_SET (pbi
->reg_live
, regno
);
3368 /* If there are any calls between INSN and INCR, show
3369 that REGNO now crosses them. */
3370 for (temp
= insn
; temp
!= incr
; temp
= NEXT_INSN (temp
))
3372 REG_N_CALLS_CROSSED (regno
)++;
3374 /* Invalidate alias info for Q since we just changed its value. */
3375 clear_reg_alias_info (q
);
3380 /* If we haven't returned, it means we were able to make the
3381 auto-inc, so update the status. First, record that this insn
3382 has an implicit side effect. */
3384 REG_NOTES (insn
) = alloc_EXPR_LIST (REG_INC
, incr_reg
, REG_NOTES (insn
));
3386 /* Modify the old increment-insn to simply copy
3387 the already-incremented value of our register. */
3388 changed
= validate_change (incr
, &SET_SRC (set
), incr_reg
, 0);
3389 gcc_assert (changed
);
3391 /* If that makes it a no-op (copying the register into itself) delete
3392 it so it won't appear to be a "use" and a "set" of this
3394 if (REGNO (SET_DEST (set
)) == REGNO (incr_reg
))
3396 /* If the original source was dead, it's dead now. */
3399 while ((note
= find_reg_note (incr
, REG_DEAD
, NULL_RTX
)) != NULL_RTX
)
3401 remove_note (incr
, note
);
3402 if (XEXP (note
, 0) != incr_reg
)
3404 unsigned int regno
= REGNO (XEXP (note
, 0));
3406 if ((pbi
->flags
& PROP_REG_INFO
)
3407 && REGNO_REG_SET_P (pbi
->reg_live
, regno
))
3409 REG_LIVE_LENGTH (regno
) += pbi
->insn_num
- reg_deaths
[regno
];
3410 reg_deaths
[regno
] = 0;
3412 CLEAR_REGNO_REG_SET (pbi
->reg_live
, REGNO (XEXP (note
, 0)));
3416 SET_INSN_DELETED (incr
);
3419 if (regno
>= FIRST_PSEUDO_REGISTER
)
3421 /* Count an extra reference to the reg. When a reg is
3422 incremented, spilling it is worse, so we want to make
3423 that less likely. */
3424 REG_FREQ (regno
) += REG_FREQ_FROM_BB (pbi
->bb
);
3426 /* Count the increment as a setting of the register,
3427 even though it isn't a SET in rtl. */
3428 REG_N_SETS (regno
)++;
3432 /* X is a MEM found in INSN. See if we can convert it into an auto-increment
3436 find_auto_inc (struct propagate_block_info
*pbi
, rtx x
, rtx insn
)
3438 rtx addr
= XEXP (x
, 0);
3439 HOST_WIDE_INT offset
= 0;
3440 rtx set
, y
, incr
, inc_val
;
3442 int size
= GET_MODE_SIZE (GET_MODE (x
));
3447 /* Here we detect use of an index register which might be good for
3448 postincrement, postdecrement, preincrement, or predecrement. */
3450 if (GET_CODE (addr
) == PLUS
&& GET_CODE (XEXP (addr
, 1)) == CONST_INT
)
3451 offset
= INTVAL (XEXP (addr
, 1)), addr
= XEXP (addr
, 0);
3456 regno
= REGNO (addr
);
3458 /* Is the next use an increment that might make auto-increment? */
3459 incr
= pbi
->reg_next_use
[regno
];
3460 if (incr
== 0 || BLOCK_NUM (incr
) != BLOCK_NUM (insn
))
3462 set
= single_set (incr
);
3463 if (set
== 0 || GET_CODE (set
) != SET
)
3467 if (GET_CODE (y
) != PLUS
)
3470 if (REG_P (XEXP (y
, 0)) && REGNO (XEXP (y
, 0)) == REGNO (addr
))
3471 inc_val
= XEXP (y
, 1);
3472 else if (REG_P (XEXP (y
, 1)) && REGNO (XEXP (y
, 1)) == REGNO (addr
))
3473 inc_val
= XEXP (y
, 0);
3477 if (GET_CODE (inc_val
) == CONST_INT
)
3479 if (HAVE_POST_INCREMENT
3480 && (INTVAL (inc_val
) == size
&& offset
== 0))
3481 attempt_auto_inc (pbi
, gen_rtx_POST_INC (Pmode
, addr
), insn
, x
,
3483 else if (HAVE_POST_DECREMENT
3484 && (INTVAL (inc_val
) == -size
&& offset
== 0))
3485 attempt_auto_inc (pbi
, gen_rtx_POST_DEC (Pmode
, addr
), insn
, x
,
3487 else if (HAVE_PRE_INCREMENT
3488 && (INTVAL (inc_val
) == size
&& offset
== size
))
3489 attempt_auto_inc (pbi
, gen_rtx_PRE_INC (Pmode
, addr
), insn
, x
,
3491 else if (HAVE_PRE_DECREMENT
3492 && (INTVAL (inc_val
) == -size
&& offset
== -size
))
3493 attempt_auto_inc (pbi
, gen_rtx_PRE_DEC (Pmode
, addr
), insn
, x
,
3495 else if (HAVE_POST_MODIFY_DISP
&& offset
== 0)
3496 attempt_auto_inc (pbi
, gen_rtx_POST_MODIFY (Pmode
, addr
,
3497 gen_rtx_PLUS (Pmode
,
3500 insn
, x
, incr
, addr
);
3501 else if (HAVE_PRE_MODIFY_DISP
&& offset
== INTVAL (inc_val
))
3502 attempt_auto_inc (pbi
, gen_rtx_PRE_MODIFY (Pmode
, addr
,
3503 gen_rtx_PLUS (Pmode
,
3506 insn
, x
, incr
, addr
);
3508 else if (REG_P (inc_val
)
3509 && ! reg_set_between_p (inc_val
, PREV_INSN (insn
),
3513 if (HAVE_POST_MODIFY_REG
&& offset
== 0)
3514 attempt_auto_inc (pbi
, gen_rtx_POST_MODIFY (Pmode
, addr
,
3515 gen_rtx_PLUS (Pmode
,
3518 insn
, x
, incr
, addr
);
3522 #endif /* AUTO_INC_DEC */
3525 mark_used_reg (struct propagate_block_info
*pbi
, rtx reg
,
3526 rtx cond ATTRIBUTE_UNUSED
, rtx insn
)
3528 unsigned int regno_first
, regno_last
, i
;
3529 int some_was_live
, some_was_dead
, some_not_set
;
3531 regno_last
= regno_first
= REGNO (reg
);
3532 if (regno_first
< FIRST_PSEUDO_REGISTER
)
3533 regno_last
+= hard_regno_nregs
[regno_first
][GET_MODE (reg
)] - 1;
3535 /* Find out if any of this register is live after this instruction. */
3536 some_was_live
= some_was_dead
= 0;
3537 for (i
= regno_first
; i
<= regno_last
; ++i
)
3539 int needed_regno
= REGNO_REG_SET_P (pbi
->reg_live
, i
);
3540 some_was_live
|= needed_regno
;
3541 some_was_dead
|= ! needed_regno
;
3544 /* Find out if any of the register was set this insn. */
3546 for (i
= regno_first
; i
<= regno_last
; ++i
)
3547 some_not_set
|= ! REGNO_REG_SET_P (pbi
->new_set
, i
);
3549 if (pbi
->flags
& (PROP_LOG_LINKS
| PROP_AUTOINC
))
3551 /* Record where each reg is used, so when the reg is set we know
3552 the next insn that uses it. */
3553 pbi
->reg_next_use
[regno_first
] = insn
;
3556 if (pbi
->flags
& PROP_REG_INFO
)
3558 if (regno_first
< FIRST_PSEUDO_REGISTER
)
3560 /* If this is a register we are going to try to eliminate,
3561 don't mark it live here. If we are successful in
3562 eliminating it, it need not be live unless it is used for
3563 pseudos, in which case it will have been set live when it
3564 was allocated to the pseudos. If the register will not
3565 be eliminated, reload will set it live at that point.
3567 Otherwise, record that this function uses this register. */
3568 /* ??? The PPC backend tries to "eliminate" on the pic
3569 register to itself. This should be fixed. In the mean
3570 time, hack around it. */
3572 if (! (TEST_HARD_REG_BIT (elim_reg_set
, regno_first
)
3573 && (regno_first
== FRAME_POINTER_REGNUM
3574 || regno_first
== ARG_POINTER_REGNUM
)))
3575 for (i
= regno_first
; i
<= regno_last
; ++i
)
3576 regs_ever_live
[i
] = 1;
3580 /* Keep track of which basic block each reg appears in. */
3582 int blocknum
= pbi
->bb
->index
;
3583 if (REG_BASIC_BLOCK (regno_first
) == REG_BLOCK_UNKNOWN
)
3584 REG_BASIC_BLOCK (regno_first
) = blocknum
;
3585 else if (REG_BASIC_BLOCK (regno_first
) != blocknum
)
3586 REG_BASIC_BLOCK (regno_first
) = REG_BLOCK_GLOBAL
;
3588 /* Count (weighted) number of uses of each reg. */
3589 REG_FREQ (regno_first
) += REG_FREQ_FROM_BB (pbi
->bb
);
3590 REG_N_REFS (regno_first
)++;
3592 for (i
= regno_first
; i
<= regno_last
; ++i
)
3593 if (! REGNO_REG_SET_P (pbi
->reg_live
, i
))
3595 gcc_assert (!reg_deaths
[i
]);
3596 reg_deaths
[i
] = pbi
->insn_num
;
3600 /* Record and count the insns in which a reg dies. If it is used in
3601 this insn and was dead below the insn then it dies in this insn.
3602 If it was set in this insn, we do not make a REG_DEAD note;
3603 likewise if we already made such a note. */
3604 if ((pbi
->flags
& (PROP_DEATH_NOTES
| PROP_REG_INFO
))
3608 /* Check for the case where the register dying partially
3609 overlaps the register set by this insn. */
3610 if (regno_first
!= regno_last
)
3611 for (i
= regno_first
; i
<= regno_last
; ++i
)
3612 some_was_live
|= REGNO_REG_SET_P (pbi
->new_set
, i
);
3614 /* If none of the words in X is needed, make a REG_DEAD note.
3615 Otherwise, we must make partial REG_DEAD notes. */
3616 if (! some_was_live
)
3618 if ((pbi
->flags
& PROP_DEATH_NOTES
)
3619 && ! find_regno_note (insn
, REG_DEAD
, regno_first
))
3621 = alloc_EXPR_LIST (REG_DEAD
, reg
, REG_NOTES (insn
));
3623 if (pbi
->flags
& PROP_REG_INFO
)
3624 REG_N_DEATHS (regno_first
)++;
3628 /* Don't make a REG_DEAD note for a part of a register
3629 that is set in the insn. */
3630 for (i
= regno_first
; i
<= regno_last
; ++i
)
3631 if (! REGNO_REG_SET_P (pbi
->reg_live
, i
)
3632 && ! dead_or_set_regno_p (insn
, i
))
3634 = alloc_EXPR_LIST (REG_DEAD
,
3640 /* Mark the register as being live. */
3641 for (i
= regno_first
; i
<= regno_last
; ++i
)
3643 #ifdef HAVE_conditional_execution
3644 int this_was_live
= REGNO_REG_SET_P (pbi
->reg_live
, i
);
3647 SET_REGNO_REG_SET (pbi
->reg_live
, i
);
3649 #ifdef HAVE_conditional_execution
3650 /* If this is a conditional use, record that fact. If it is later
3651 conditionally set, we'll know to kill the register. */
3652 if (cond
!= NULL_RTX
)
3654 splay_tree_node node
;
3655 struct reg_cond_life_info
*rcli
;
3660 node
= splay_tree_lookup (pbi
->reg_cond_dead
, i
);
3663 /* The register was unconditionally live previously.
3664 No need to do anything. */
3668 /* The register was conditionally live previously.
3669 Subtract the new life cond from the old death cond. */
3670 rcli
= (struct reg_cond_life_info
*) node
->value
;
3671 ncond
= rcli
->condition
;
3672 ncond
= and_reg_cond (ncond
, not_reg_cond (cond
), 1);
3674 /* If the register is now unconditionally live,
3675 remove the entry in the splay_tree. */
3676 if (ncond
== const0_rtx
)
3677 splay_tree_remove (pbi
->reg_cond_dead
, i
);
3680 rcli
->condition
= ncond
;
3681 SET_REGNO_REG_SET (pbi
->reg_cond_reg
,
3682 REGNO (XEXP (cond
, 0)));
3688 /* The register was not previously live at all. Record
3689 the condition under which it is still dead. */
3690 rcli
= xmalloc (sizeof (*rcli
));
3691 rcli
->condition
= not_reg_cond (cond
);
3692 rcli
->stores
= const0_rtx
;
3693 rcli
->orig_condition
= const0_rtx
;
3694 splay_tree_insert (pbi
->reg_cond_dead
, i
,
3695 (splay_tree_value
) rcli
);
3697 SET_REGNO_REG_SET (pbi
->reg_cond_reg
, REGNO (XEXP (cond
, 0)));
3700 else if (this_was_live
)
3702 /* The register may have been conditionally live previously, but
3703 is now unconditionally live. Remove it from the conditionally
3704 dead list, so that a conditional set won't cause us to think
3706 splay_tree_remove (pbi
->reg_cond_dead
, i
);
3712 /* Scan expression X and store a 1-bit in NEW_LIVE for each reg it uses.
3713 This is done assuming the registers needed from X are those that
3714 have 1-bits in PBI->REG_LIVE.
3716 INSN is the containing instruction. If INSN is dead, this function
3720 mark_used_regs (struct propagate_block_info
*pbi
, rtx x
, rtx cond
, rtx insn
)
3724 int flags
= pbi
->flags
;
3729 code
= GET_CODE (x
);
3750 /* If we are clobbering a MEM, mark any registers inside the address
3752 if (MEM_P (XEXP (x
, 0)))
3753 mark_used_regs (pbi
, XEXP (XEXP (x
, 0), 0), cond
, insn
);
3757 /* Don't bother watching stores to mems if this is not the
3758 final pass. We'll not be deleting dead stores this round. */
3759 if (optimize
&& (flags
& PROP_SCAN_DEAD_STORES
))
3761 /* Invalidate the data for the last MEM stored, but only if MEM is
3762 something that can be stored into. */
3763 if (GET_CODE (XEXP (x
, 0)) == SYMBOL_REF
3764 && CONSTANT_POOL_ADDRESS_P (XEXP (x
, 0)))
3765 /* Needn't clear the memory set list. */
3769 rtx temp
= pbi
->mem_set_list
;
3770 rtx prev
= NULL_RTX
;
3775 next
= XEXP (temp
, 1);
3776 if (anti_dependence (XEXP (temp
, 0), x
))
3778 /* Splice temp out of the list. */
3780 XEXP (prev
, 1) = next
;
3782 pbi
->mem_set_list
= next
;
3783 free_EXPR_LIST_node (temp
);
3784 pbi
->mem_set_list_len
--;
3792 /* If the memory reference had embedded side effects (autoincrement
3793 address modes. Then we may need to kill some entries on the
3796 for_each_rtx (&PATTERN (insn
), invalidate_mems_from_autoinc
, pbi
);
3800 if (flags
& PROP_AUTOINC
)
3801 find_auto_inc (pbi
, x
, insn
);
3806 #ifdef CANNOT_CHANGE_MODE_CLASS
3807 if (flags
& PROP_REG_INFO
)
3808 record_subregs_of_mode (x
);
3811 /* While we're here, optimize this case. */
3818 /* See a register other than being set => mark it as needed. */
3819 mark_used_reg (pbi
, x
, cond
, insn
);
3824 rtx testreg
= SET_DEST (x
);
3827 /* If storing into MEM, don't show it as being used. But do
3828 show the address as being used. */
3829 if (MEM_P (testreg
))
3832 if (flags
& PROP_AUTOINC
)
3833 find_auto_inc (pbi
, testreg
, insn
);
3835 mark_used_regs (pbi
, XEXP (testreg
, 0), cond
, insn
);
3836 mark_used_regs (pbi
, SET_SRC (x
), cond
, insn
);
3840 /* Storing in STRICT_LOW_PART is like storing in a reg
3841 in that this SET might be dead, so ignore it in TESTREG.
3842 but in some other ways it is like using the reg.
3844 Storing in a SUBREG or a bit field is like storing the entire
3845 register in that if the register's value is not used
3846 then this SET is not needed. */
3847 while (GET_CODE (testreg
) == STRICT_LOW_PART
3848 || GET_CODE (testreg
) == ZERO_EXTRACT
3849 || GET_CODE (testreg
) == SUBREG
)
3851 #ifdef CANNOT_CHANGE_MODE_CLASS
3852 if ((flags
& PROP_REG_INFO
) && GET_CODE (testreg
) == SUBREG
)
3853 record_subregs_of_mode (testreg
);
3856 /* Modifying a single register in an alternate mode
3857 does not use any of the old value. But these other
3858 ways of storing in a register do use the old value. */
3859 if (GET_CODE (testreg
) == SUBREG
3860 && !((REG_BYTES (SUBREG_REG (testreg
))
3861 + UNITS_PER_WORD
- 1) / UNITS_PER_WORD
3862 > (REG_BYTES (testreg
)
3863 + UNITS_PER_WORD
- 1) / UNITS_PER_WORD
))
3868 testreg
= XEXP (testreg
, 0);
3871 /* If this is a store into a register or group of registers,
3872 recursively scan the value being stored. */
3874 if ((GET_CODE (testreg
) == PARALLEL
3875 && GET_MODE (testreg
) == BLKmode
)
3877 && (regno
= REGNO (testreg
),
3878 ! (regno
== FRAME_POINTER_REGNUM
3879 && (! reload_completed
|| frame_pointer_needed
)))
3880 #if FRAME_POINTER_REGNUM != HARD_FRAME_POINTER_REGNUM
3881 && ! (regno
== HARD_FRAME_POINTER_REGNUM
3882 && (! reload_completed
|| frame_pointer_needed
))
3884 #if FRAME_POINTER_REGNUM != ARG_POINTER_REGNUM
3885 && ! (regno
== ARG_POINTER_REGNUM
&& fixed_regs
[regno
])
3890 mark_used_regs (pbi
, SET_DEST (x
), cond
, insn
);
3891 mark_used_regs (pbi
, SET_SRC (x
), cond
, insn
);
3898 case UNSPEC_VOLATILE
:
3902 /* Traditional and volatile asm instructions must be considered to use
3903 and clobber all hard registers, all pseudo-registers and all of
3904 memory. So must TRAP_IF and UNSPEC_VOLATILE operations.
3906 Consider for instance a volatile asm that changes the fpu rounding
3907 mode. An insn should not be moved across this even if it only uses
3908 pseudo-regs because it might give an incorrectly rounded result.
3910 ?!? Unfortunately, marking all hard registers as live causes massive
3911 problems for the register allocator and marking all pseudos as live
3912 creates mountains of uninitialized variable warnings.
3914 So for now, just clear the memory set list and mark any regs
3915 we can find in ASM_OPERANDS as used. */
3916 if (code
!= ASM_OPERANDS
|| MEM_VOLATILE_P (x
))
3918 free_EXPR_LIST_list (&pbi
->mem_set_list
);
3919 pbi
->mem_set_list_len
= 0;
3922 /* For all ASM_OPERANDS, we must traverse the vector of input operands.
3923 We can not just fall through here since then we would be confused
3924 by the ASM_INPUT rtx inside ASM_OPERANDS, which do not indicate
3925 traditional asms unlike their normal usage. */
3926 if (code
== ASM_OPERANDS
)
3930 for (j
= 0; j
< ASM_OPERANDS_INPUT_LENGTH (x
); j
++)
3931 mark_used_regs (pbi
, ASM_OPERANDS_INPUT (x
, j
), cond
, insn
);
3939 mark_used_regs (pbi
, COND_EXEC_TEST (x
), NULL_RTX
, insn
);
3941 cond
= COND_EXEC_TEST (x
);
3942 x
= COND_EXEC_CODE (x
);
3949 /* Recursively scan the operands of this expression. */
3952 const char * const fmt
= GET_RTX_FORMAT (code
);
3955 for (i
= GET_RTX_LENGTH (code
) - 1; i
>= 0; i
--)
3959 /* Tail recursive case: save a function call level. */
3965 mark_used_regs (pbi
, XEXP (x
, i
), cond
, insn
);
3967 else if (fmt
[i
] == 'E')
3970 for (j
= 0; j
< XVECLEN (x
, i
); j
++)
3971 mark_used_regs (pbi
, XVECEXP (x
, i
, j
), cond
, insn
);
3980 try_pre_increment_1 (struct propagate_block_info
*pbi
, rtx insn
)
3982 /* Find the next use of this reg. If in same basic block,
3983 make it do pre-increment or pre-decrement if appropriate. */
3984 rtx x
= single_set (insn
);
3985 HOST_WIDE_INT amount
= ((GET_CODE (SET_SRC (x
)) == PLUS
? 1 : -1)
3986 * INTVAL (XEXP (SET_SRC (x
), 1)));
3987 int regno
= REGNO (SET_DEST (x
));
3988 rtx y
= pbi
->reg_next_use
[regno
];
3990 && SET_DEST (x
) != stack_pointer_rtx
3991 && BLOCK_NUM (y
) == BLOCK_NUM (insn
)
3992 /* Don't do this if the reg dies, or gets set in y; a standard addressing
3993 mode would be better. */
3994 && ! dead_or_set_p (y
, SET_DEST (x
))
3995 && try_pre_increment (y
, SET_DEST (x
), amount
))
3997 /* We have found a suitable auto-increment and already changed
3998 insn Y to do it. So flush this increment instruction. */
3999 propagate_block_delete_insn (insn
);
4001 /* Count a reference to this reg for the increment insn we are
4002 deleting. When a reg is incremented, spilling it is worse,
4003 so we want to make that less likely. */
4004 if (regno
>= FIRST_PSEUDO_REGISTER
)
4006 REG_FREQ (regno
) += REG_FREQ_FROM_BB (pbi
->bb
);
4007 REG_N_SETS (regno
)++;
4010 /* Flush any remembered memories depending on the value of
4011 the incremented register. */
4012 invalidate_mems_from_set (pbi
, SET_DEST (x
));
4019 /* Try to change INSN so that it does pre-increment or pre-decrement
4020 addressing on register REG in order to add AMOUNT to REG.
4021 AMOUNT is negative for pre-decrement.
4022 Returns 1 if the change could be made.
4023 This checks all about the validity of the result of modifying INSN. */
4026 try_pre_increment (rtx insn
, rtx reg
, HOST_WIDE_INT amount
)
4030 /* Nonzero if we can try to make a pre-increment or pre-decrement.
4031 For example, addl $4,r1; movl (r1),... can become movl +(r1),... */
4033 /* Nonzero if we can try to make a post-increment or post-decrement.
4034 For example, addl $4,r1; movl -4(r1),... can become movl (r1)+,...
4035 It is possible for both PRE_OK and POST_OK to be nonzero if the machine
4036 supports both pre-inc and post-inc, or both pre-dec and post-dec. */
4039 /* Nonzero if the opportunity actually requires post-inc or post-dec. */
4042 /* From the sign of increment, see which possibilities are conceivable
4043 on this target machine. */
4044 if (HAVE_PRE_INCREMENT
&& amount
> 0)
4046 if (HAVE_POST_INCREMENT
&& amount
> 0)
4049 if (HAVE_PRE_DECREMENT
&& amount
< 0)
4051 if (HAVE_POST_DECREMENT
&& amount
< 0)
4054 if (! (pre_ok
|| post_ok
))
4057 /* It is not safe to add a side effect to a jump insn
4058 because if the incremented register is spilled and must be reloaded
4059 there would be no way to store the incremented value back in memory. */
4066 use
= find_use_as_address (PATTERN (insn
), reg
, 0);
4067 if (post_ok
&& (use
== 0 || use
== (rtx
) (size_t) 1))
4069 use
= find_use_as_address (PATTERN (insn
), reg
, -amount
);
4073 if (use
== 0 || use
== (rtx
) (size_t) 1)
4076 if (GET_MODE_SIZE (GET_MODE (use
)) != (amount
> 0 ? amount
: - amount
))
4079 /* See if this combination of instruction and addressing mode exists. */
4080 if (! validate_change (insn
, &XEXP (use
, 0),
4081 gen_rtx_fmt_e (amount
> 0
4082 ? (do_post
? POST_INC
: PRE_INC
)
4083 : (do_post
? POST_DEC
: PRE_DEC
),
4087 /* Record that this insn now has an implicit side effect on X. */
4088 REG_NOTES (insn
) = alloc_EXPR_LIST (REG_INC
, reg
, REG_NOTES (insn
));
4092 #endif /* AUTO_INC_DEC */
4094 /* Find the place in the rtx X where REG is used as a memory address.
4095 Return the MEM rtx that so uses it.
4096 If PLUSCONST is nonzero, search instead for a memory address equivalent to
4097 (plus REG (const_int PLUSCONST)).
4099 If such an address does not appear, return 0.
4100 If REG appears more than once, or is used other than in such an address,
4104 find_use_as_address (rtx x
, rtx reg
, HOST_WIDE_INT plusconst
)
4106 enum rtx_code code
= GET_CODE (x
);
4107 const char * const fmt
= GET_RTX_FORMAT (code
);
4112 if (code
== MEM
&& XEXP (x
, 0) == reg
&& plusconst
== 0)
4115 if (code
== MEM
&& GET_CODE (XEXP (x
, 0)) == PLUS
4116 && XEXP (XEXP (x
, 0), 0) == reg
4117 && GET_CODE (XEXP (XEXP (x
, 0), 1)) == CONST_INT
4118 && INTVAL (XEXP (XEXP (x
, 0), 1)) == plusconst
)
4121 if (code
== SIGN_EXTRACT
|| code
== ZERO_EXTRACT
)
4123 /* If REG occurs inside a MEM used in a bit-field reference,
4124 that is unacceptable. */
4125 if (find_use_as_address (XEXP (x
, 0), reg
, 0) != 0)
4126 return (rtx
) (size_t) 1;
4130 return (rtx
) (size_t) 1;
4132 for (i
= GET_RTX_LENGTH (code
) - 1; i
>= 0; i
--)
4136 tem
= find_use_as_address (XEXP (x
, i
), reg
, plusconst
);
4140 return (rtx
) (size_t) 1;
4142 else if (fmt
[i
] == 'E')
4145 for (j
= XVECLEN (x
, i
) - 1; j
>= 0; j
--)
4147 tem
= find_use_as_address (XVECEXP (x
, i
, j
), reg
, plusconst
);
4151 return (rtx
) (size_t) 1;
4159 /* Write information about registers and basic blocks into FILE.
4160 This is part of making a debugging dump. */
4163 dump_regset (regset r
, FILE *outf
)
4166 reg_set_iterator rsi
;
4170 fputs (" (nil)", outf
);
4174 EXECUTE_IF_SET_IN_REG_SET (r
, 0, i
, rsi
)
4176 fprintf (outf
, " %d", i
);
4177 if (i
< FIRST_PSEUDO_REGISTER
)
4178 fprintf (outf
, " [%s]",
4183 /* Print a human-readable representation of R on the standard error
4184 stream. This function is designed to be used from within the
4188 debug_regset (regset r
)
4190 dump_regset (r
, stderr
);
4191 putc ('\n', stderr
);
4194 /* Recompute register set/reference counts immediately prior to register
4197 This avoids problems with set/reference counts changing to/from values
4198 which have special meanings to the register allocators.
4200 Additionally, the reference counts are the primary component used by the
4201 register allocators to prioritize pseudos for allocation to hard regs.
4202 More accurate reference counts generally lead to better register allocation.
4204 F is the first insn to be scanned.
4206 LOOP_STEP denotes how much loop_depth should be incremented per
4207 loop nesting level in order to increase the ref count more for
4208 references in a loop.
4210 It might be worthwhile to update REG_LIVE_LENGTH, REG_BASIC_BLOCK and
4211 possibly other information which is used by the register allocators. */
4214 recompute_reg_usage (rtx f ATTRIBUTE_UNUSED
, int loop_step ATTRIBUTE_UNUSED
)
4216 allocate_reg_life_data ();
4217 /* distribute_notes in combiner fails to convert some of the REG_UNUSED notes
4218 to REG_DEAD notes. This causes CHECK_DEAD_NOTES in sched1 to abort. To
4219 solve this update the DEATH_NOTES here. */
4220 update_life_info (NULL
, UPDATE_LIFE_LOCAL
, PROP_REG_INFO
| PROP_DEATH_NOTES
);
4223 /* Optionally removes all the REG_DEAD and REG_UNUSED notes from a set of
4224 blocks. If BLOCKS is NULL, assume the universal set. Returns a count
4225 of the number of registers that died. */
4228 count_or_remove_death_notes (sbitmap blocks
, int kill
)
4234 /* This used to be a loop over all the blocks with a membership test
4235 inside the loop. That can be amazingly expensive on a large CFG
4236 when only a small number of bits are set in BLOCKs (for example,
4237 the calls from the scheduler typically have very few bits set).
4239 For extra credit, someone should convert BLOCKS to a bitmap rather
4243 EXECUTE_IF_SET_IN_SBITMAP (blocks
, 0, i
,
4245 count
+= count_or_remove_death_notes_bb (BASIC_BLOCK (i
), kill
);
4252 count
+= count_or_remove_death_notes_bb (bb
, kill
);
4259 /* Optionally removes all the REG_DEAD and REG_UNUSED notes from basic
4260 block BB. Returns a count of the number of registers that died. */
4263 count_or_remove_death_notes_bb (basic_block bb
, int kill
)
4268 for (insn
= BB_HEAD (bb
); ; insn
= NEXT_INSN (insn
))
4272 rtx
*pprev
= ®_NOTES (insn
);
4277 switch (REG_NOTE_KIND (link
))
4280 if (REG_P (XEXP (link
, 0)))
4282 rtx reg
= XEXP (link
, 0);
4285 if (REGNO (reg
) >= FIRST_PSEUDO_REGISTER
)
4288 n
= hard_regno_nregs
[REGNO (reg
)][GET_MODE (reg
)];
4297 rtx next
= XEXP (link
, 1);
4298 free_EXPR_LIST_node (link
);
4299 *pprev
= link
= next
;
4305 pprev
= &XEXP (link
, 1);
4312 if (insn
== BB_END (bb
))
4319 /* Clear LOG_LINKS fields of insns in a selected blocks or whole chain
4320 if blocks is NULL. */
4323 clear_log_links (sbitmap blocks
)
4330 for (insn
= get_insns (); insn
; insn
= NEXT_INSN (insn
))
4332 free_INSN_LIST_list (&LOG_LINKS (insn
));
4335 EXECUTE_IF_SET_IN_SBITMAP (blocks
, 0, i
,
4337 basic_block bb
= BASIC_BLOCK (i
);
4339 for (insn
= BB_HEAD (bb
); insn
!= NEXT_INSN (BB_END (bb
));
4340 insn
= NEXT_INSN (insn
))
4342 free_INSN_LIST_list (&LOG_LINKS (insn
));
4346 /* Given a register bitmap, turn on the bits in a HARD_REG_SET that
4347 correspond to the hard registers, if any, set in that map. This
4348 could be done far more efficiently by having all sorts of special-cases
4349 with moving single words, but probably isn't worth the trouble. */
4352 reg_set_to_hard_reg_set (HARD_REG_SET
*to
, bitmap from
)
4357 EXECUTE_IF_SET_IN_BITMAP (from
, 0, i
, bi
)
4359 if (i
>= FIRST_PSEUDO_REGISTER
)
4361 SET_HARD_REG_BIT (*to
, i
);