1 ------------------------------------------------------------------------------
3 -- GNAT COMPILER COMPONENTS --
9 -- Copyright (C) 1992-2012, Free Software Foundation, Inc. --
11 -- GNAT is free software; you can redistribute it and/or modify it under --
12 -- terms of the GNU General Public License as published by the Free Soft- --
13 -- ware Foundation; either version 3, or (at your option) any later ver- --
14 -- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
15 -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
16 -- or FITNESS FOR A PARTICULAR PURPOSE. --
18 -- As a special exception under Section 7 of GPL version 3, you are granted --
19 -- additional permissions described in the GCC Runtime Library Exception, --
20 -- version 3.1, as published by the Free Software Foundation. --
22 -- You should have received a copy of the GNU General Public License and --
23 -- a copy of the GCC Runtime Library Exception along with this program; --
24 -- see the files COPYING3 and COPYING.RUNTIME respectively. If not, see --
25 -- <http://www.gnu.org/licenses/>. --
27 -- GNAT was originally developed by the GNAT team at New York University. --
28 -- Extensive contributions were provided by Ada Core Technologies Inc. --
30 ------------------------------------------------------------------------------
32 -- This package contains host independent type definitions which are used
33 -- in more than one unit in the compiler. They are gathered here for easy
34 -- reference, although in some cases the full description is found in the
35 -- relevant module which implements the definition. The main reason that they
36 -- are not in their "natural" specs is that this would cause a lot of inter-
37 -- spec dependencies, and in particular some awkward circular dependencies
38 -- would have to be dealt with.
40 -- WARNING: There is a C version of this package. Any changes to this source
41 -- file must be properly reflected in the C header file types.h declarations.
43 -- Note: the declarations in this package reflect an expectation that the host
44 -- machine has an efficient integer base type with a range at least 32 bits
45 -- 2s-complement. If there are any machines for which this is not a correct
46 -- assumption, a significant number of changes will be required!
49 with Unchecked_Conversion
;
50 with Unchecked_Deallocation
;
55 -------------------------------
56 -- General Use Integer Types --
57 -------------------------------
59 type Int
is range -2 ** 31 .. +2 ** 31 - 1;
60 -- Signed 32-bit integer
62 subtype Nat
is Int
range 0 .. Int
'Last;
63 -- Non-negative Int values
65 subtype Pos
is Int
range 1 .. Int
'Last;
66 -- Positive Int values
68 type Word
is mod 2 ** 32;
69 -- Unsigned 32-bit integer
71 type Short
is range -32768 .. +32767;
72 for Short
'Size use 16;
73 -- 16-bit signed integer
75 type Byte
is mod 2 ** 8;
77 -- 8-bit unsigned integer
79 type size_t
is mod 2 ** Standard
'Address_Size;
80 -- Memory size value, for use in calls to C routines
82 --------------------------------------
83 -- 8-Bit Character and String Types --
84 --------------------------------------
86 -- We use Standard.Character and Standard.String freely, since we are
87 -- compiling ourselves, and we properly implement the required 8-bit
88 -- character code as required in Ada 95. This section defines a few
89 -- general use constants and subtypes.
91 EOF
: constant Character := ASCII
.SUB
;
92 -- The character SUB (16#1A#) is used in DOS and other systems derived
93 -- from DOS (XP, NT etc) to signal the end of a text file. Internally
94 -- all source files are ended by an EOF character, even on Unix systems.
95 -- An EOF character acts as the end of file only as the last character
96 -- of a source buffer, in any other position, it is treated as a blank
97 -- if it appears between tokens, and as an illegal character otherwise.
98 -- This makes life easier dealing with files that originated from DOS,
99 -- including concatenated files with interspersed EOF characters.
101 subtype Graphic_Character
is Character range ' ' .. '~';
102 -- Graphic characters, as defined in ARM
104 subtype Line_Terminator
is Character range ASCII
.LF
.. ASCII
.CR
;
105 -- Line terminator characters (LF, VT, FF, CR). For further details,
106 -- see the extensive discussion of line termination in the Sinput spec.
108 subtype Upper_Half_Character
is
109 Character range Character'Val (16#
80#
) .. Character'Val (16#FF#
);
110 -- Characters with the upper bit set
112 type Character_Ptr
is access all Character;
113 type String_Ptr
is access all String;
114 -- Standard character and string pointers
116 procedure Free
is new Unchecked_Deallocation
(String, String_Ptr
);
117 -- Procedure for freeing dynamically allocated String values
119 subtype Big_String
is String (Positive);
120 type Big_String_Ptr
is access all Big_String
;
121 -- Virtual type for handling imported big strings. Note that we should
122 -- never have any allocators for this type, but we don't give a storage
123 -- size of zero, since there are legitimate deallocations going on.
125 function To_Big_String_Ptr
is
126 new Unchecked_Conversion
(System
.Address
, Big_String_Ptr
);
127 -- Used to obtain Big_String_Ptr values from external addresses
129 subtype Word_Hex_String
is String (1 .. 8);
130 -- Type used to represent Word value as 8 hex digits, with lower case
131 -- letters for the alphabetic cases.
133 function Get_Hex_String
(W
: Word
) return Word_Hex_String
;
134 -- Convert word value to 8-character hex string
136 -----------------------------------------
137 -- Types Used for Text Buffer Handling --
138 -----------------------------------------
140 -- We can not use type String for text buffers, since we must use the
141 -- standard 32-bit integer as an index value, since we count on all index
142 -- values being the same size.
144 type Text_Ptr
is new Int
;
145 -- Type used for subscripts in text buffer
147 type Text_Buffer
is array (Text_Ptr
range <>) of Character;
148 -- Text buffer used to hold source file or library information file
150 type Text_Buffer_Ptr
is access all Text_Buffer
;
151 -- Text buffers for input files are allocated dynamically and this type
152 -- is used to reference these text buffers.
154 procedure Free
is new Unchecked_Deallocation
(Text_Buffer
, Text_Buffer_Ptr
);
155 -- Procedure for freeing dynamically allocated text buffers
157 ------------------------------------------
158 -- Types Used for Source Input Handling --
159 ------------------------------------------
161 type Logical_Line_Number
is range 0 .. Int
'Last;
162 for Logical_Line_Number
'Size use 32;
163 -- Line number type, used for storing logical line numbers (i.e. line
164 -- numbers that include effects of any Source_Reference pragmas in the
165 -- source file). The value zero indicates a line containing a source
168 No_Line_Number
: constant Logical_Line_Number
:= 0;
169 -- Special value used to indicate no line number
171 type Physical_Line_Number
is range 1 .. Int
'Last;
172 for Physical_Line_Number
'Size use 32;
173 -- Line number type, used for storing physical line numbers (i.e. line
174 -- numbers in the physical file being compiled, unaffected by the presence
175 -- of source reference pragmas.
177 type Column_Number
is range 0 .. 32767;
178 for Column_Number
'Size use 16;
179 -- Column number (assume that 2**15 - 1 is large enough). The range for
180 -- this type is used to compute Hostparm.Max_Line_Length. See also the
181 -- processing for -gnatyM in Stylesw).
183 No_Column_Number
: constant Column_Number
:= 0;
184 -- Special value used to indicate no column number
186 subtype Source_Buffer
is Text_Buffer
;
187 -- Type used to store text of a source file. The buffer for the main
188 -- source (the source specified on the command line) has a lower bound
189 -- starting at zero. Subsequent subsidiary sources have lower bounds
190 -- which are one greater than the previous upper bound.
192 subtype Big_Source_Buffer
is Text_Buffer
(0 .. Text_Ptr
'Last);
193 -- This is a virtual type used as the designated type of the access type
194 -- Source_Buffer_Ptr, see Osint.Read_Source_File for details.
196 type Source_Buffer_Ptr
is access all Big_Source_Buffer
;
197 -- Pointer to source buffer. We use virtual origin addressing for source
198 -- buffers, with thin pointers. The pointer points to a virtual instance
199 -- of type Big_Source_Buffer, where the actual type is in fact of type
200 -- Source_Buffer. The address is adjusted so that the virtual origin
201 -- addressing works correctly. See Osint.Read_Source_Buffer for further
202 -- details. Again, as for Big_String_Ptr, we should never allocate using
203 -- this type, but we don't give a storage size clause of zero, since we
204 -- may end up doing deallocations of instances allocated manually.
206 subtype Source_Ptr
is Text_Ptr
;
207 -- Type used to represent a source location, which is a subscript of a
208 -- character in the source buffer. As noted above, different source buffers
209 -- have different ranges, so it is possible to tell from a Source_Ptr value
210 -- which source it refers to. Note that negative numbers are allowed to
211 -- accommodate the following special values.
213 No_Location
: constant Source_Ptr
:= -1;
214 -- Value used to indicate no source position set in a node. A test for a
215 -- Source_Ptr value being > No_Location is the approved way to test for a
216 -- standard value that does not include No_Location or any of the following
217 -- special definitions. One important use of No_Location is to label
218 -- generated nodes that we don't want the debugger to see in normal mode
219 -- (very often we conditionalize so that we set No_Location in normal mode
220 -- and the corresponding source line in -gnatD mode).
222 Standard_Location
: constant Source_Ptr
:= -2;
223 -- Used for all nodes in the representation of package Standard other than
224 -- nodes representing the contents of Standard.ASCII. Note that testing for
225 -- a value being <= Standard_Location tests for both Standard_Location and
226 -- for Standard_ASCII_Location.
228 Standard_ASCII_Location
: constant Source_Ptr
:= -3;
229 -- Used for all nodes in the presentation of package Standard.ASCII
231 System_Location
: constant Source_Ptr
:= -4;
232 -- Used to identify locations of pragmas scanned by Targparm, where we know
233 -- the location is in System, but we don't know exactly what line.
235 First_Source_Ptr
: constant Source_Ptr
:= 0;
236 -- Starting source pointer index value for first source program
238 -------------------------------------
239 -- Range Definitions for Tree Data --
240 -------------------------------------
242 -- The tree has fields that can hold any of the following types:
244 -- Pointers to other tree nodes (type Node_Id)
245 -- List pointers (type List_Id)
246 -- Element list pointers (type Elist_Id)
247 -- Names (type Name_Id)
248 -- Strings (type String_Id)
249 -- Universal integers (type Uint)
250 -- Universal reals (type Ureal)
252 -- In most contexts, the strongly typed interface determines which of these
253 -- types is present. However, there are some situations (involving untyped
254 -- traversals of the tree), where it is convenient to be easily able to
255 -- distinguish these values. The underlying representation in all cases is
256 -- an integer type Union_Id, and we ensure that the range of the various
257 -- possible values for each of the above types is disjoint so that this
258 -- distinction is possible.
260 -- Note: it is also helpful for debugging purposes to make these ranges
261 -- distinct. If a bug leads to misidentification of a value, then it will
262 -- typically result in an out of range value and a Constraint_Error.
264 type Union_Id
is new Int
;
265 -- The type in the tree for a union of possible ID values
267 List_Low_Bound
: constant := -100_000_000
;
268 -- The List_Id values are subscripts into an array of list headers which
269 -- has List_Low_Bound as its lower bound. This value is chosen so that all
270 -- List_Id values are negative, and the value zero is in the range of both
271 -- List_Id and Node_Id values (see further description below).
273 List_High_Bound
: constant := 0;
274 -- Maximum List_Id subscript value. This allows up to 100 million list Id
275 -- values, which is in practice infinite, and there is no need to check the
276 -- range. The range overlaps the node range by one element (with value
277 -- zero), which is used both for the Empty node, and for indicating no
278 -- list. The fact that the same value is used is convenient because it
279 -- means that the default value of Empty applies to both nodes and lists,
280 -- and also is more efficient to test for.
282 Node_Low_Bound
: constant := 0;
283 -- The tree Id values start at zero, because we use zero for Empty (to
284 -- allow a zero test for Empty). Actual tree node subscripts start at 0
285 -- since Empty is a legitimate node value.
287 Node_High_Bound
: constant := 099_999_999
;
288 -- Maximum number of nodes that can be allocated is 100 million, which
289 -- is in practice infinite, and there is no need to check the range.
291 Elist_Low_Bound
: constant := 100_000_000
;
292 -- The Elist_Id values are subscripts into an array of elist headers which
293 -- has Elist_Low_Bound as its lower bound.
295 Elist_High_Bound
: constant := 199_999_999
;
296 -- Maximum Elist_Id subscript value. This allows up to 100 million Elists,
297 -- which is in practice infinite and there is no need to check the range.
299 Elmt_Low_Bound
: constant := 200_000_000
;
300 -- Low bound of element Id values. The use of these values is internal to
301 -- the Elists package, but the definition of the range is included here
302 -- since it must be disjoint from other Id values. The Elmt_Id values are
303 -- subscripts into an array of list elements which has this as lower bound.
305 Elmt_High_Bound
: constant := 299_999_999
;
306 -- Upper bound of Elmt_Id values. This allows up to 100 million element
307 -- list members, which is in practice infinite (no range check needed).
309 Names_Low_Bound
: constant := 300_000_000
;
310 -- Low bound for name Id values
312 Names_High_Bound
: constant := 399_999_999
;
313 -- Maximum number of names that can be allocated is 100 million, which is
314 -- in practice infinite and there is no need to check the range.
316 Strings_Low_Bound
: constant := 400_000_000
;
317 -- Low bound for string Id values
319 Strings_High_Bound
: constant := 499_999_999
;
320 -- Maximum number of strings that can be allocated is 100 million, which
321 -- is in practice infinite and there is no need to check the range.
323 Ureal_Low_Bound
: constant := 500_000_000
;
324 -- Low bound for Ureal values
326 Ureal_High_Bound
: constant := 599_999_999
;
327 -- Maximum number of Ureal values stored is 100_000_000 which is in
328 -- practice infinite so that no check is required.
330 Uint_Low_Bound
: constant := 600_000_000
;
331 -- Low bound for Uint values
333 Uint_Table_Start
: constant := 2_000_000_000
;
334 -- Location where table entries for universal integers start (see
335 -- Uintp spec for details of the representation of Uint values).
337 Uint_High_Bound
: constant := 2_099_999_999
;
338 -- The range of Uint values is very large, since a substantial part
339 -- of this range is used to store direct values, see Uintp for details.
341 -- The following subtype definitions are used to provide convenient names
342 -- for membership tests on Int values to see what data type range they
343 -- lie in. Such tests appear only in the lowest level packages.
345 subtype List_Range
is Union_Id
346 range List_Low_Bound
.. List_High_Bound
;
348 subtype Node_Range
is Union_Id
349 range Node_Low_Bound
.. Node_High_Bound
;
351 subtype Elist_Range
is Union_Id
352 range Elist_Low_Bound
.. Elist_High_Bound
;
354 subtype Elmt_Range
is Union_Id
355 range Elmt_Low_Bound
.. Elmt_High_Bound
;
357 subtype Names_Range
is Union_Id
358 range Names_Low_Bound
.. Names_High_Bound
;
360 subtype Strings_Range
is Union_Id
361 range Strings_Low_Bound
.. Strings_High_Bound
;
363 subtype Uint_Range
is Union_Id
364 range Uint_Low_Bound
.. Uint_High_Bound
;
366 subtype Ureal_Range
is Union_Id
367 range Ureal_Low_Bound
.. Ureal_High_Bound
;
369 -----------------------------
370 -- Types for Atree Package --
371 -----------------------------
373 -- Node_Id values are used to identify nodes in the tree. They are
374 -- subscripts into the Nodes table declared in package Atree. Note that
375 -- the special values Empty and Error are subscripts into this table.
376 -- See package Atree for further details.
378 type Node_Id
is range Node_Low_Bound
.. Node_High_Bound
;
379 -- Type used to identify nodes in the tree
381 subtype Entity_Id
is Node_Id
;
382 -- A synonym for node types, used in the Einfo package to refer to nodes
383 -- that are entities (i.e. nodes with an Nkind of N_Defining_xxx). All such
384 -- nodes are extended nodes and these are the only extended nodes, so that
385 -- in practice entity and extended nodes are synonymous.
387 subtype Node_Or_Entity_Id
is Node_Id
;
388 -- A synonym for node types, used in cases where a given value may be used
389 -- to represent either a node or an entity. We like to minimize such uses
390 -- for obvious reasons of logical type consistency, but where such uses
391 -- occur, they should be documented by use of this type.
393 Empty
: constant Node_Id
:= Node_Low_Bound
;
394 -- Used to indicate null node. A node is actually allocated with this
395 -- Id value, so that Nkind (Empty) = N_Empty. Note that Node_Low_Bound
396 -- is zero, so Empty = No_List = zero.
398 Empty_List_Or_Node
: constant := 0;
399 -- This constant is used in situations (e.g. initializing empty fields)
400 -- where the value set will be used to represent either an empty node or
401 -- a non-existent list, depending on the context.
403 Error
: constant Node_Id
:= Node_Low_Bound
+ 1;
404 -- Used to indicate an error in the source program. A node is actually
405 -- allocated with this Id value, so that Nkind (Error) = N_Error.
407 Empty_Or_Error
: constant Node_Id
:= Error
;
408 -- Since Empty and Error are the first two Node_Id values, the test for
409 -- N <= Empty_Or_Error tests to see if N is Empty or Error. This definition
410 -- provides convenient self-documentation for such tests.
412 First_Node_Id
: constant Node_Id
:= Node_Low_Bound
;
413 -- Subscript of first allocated node. Note that Empty and Error are both
414 -- allocated nodes, whose Nkind fields can be accessed without error.
416 ------------------------------
417 -- Types for Nlists Package --
418 ------------------------------
420 -- List_Id values are used to identify node lists stored in the tree, so
421 -- that each node can be on at most one such list (see package Nlists for
422 -- further details). Note that the special value Error_List is a subscript
423 -- in this table, but the value No_List is *not* a valid subscript, and any
424 -- attempt to apply list operations to No_List will cause a (detected)
427 type List_Id
is range List_Low_Bound
.. List_High_Bound
;
428 -- Type used to identify a node list
430 No_List
: constant List_Id
:= List_High_Bound
;
431 -- Used to indicate absence of a list. Note that the value is zero, which
432 -- is the same as Empty, which is helpful in initializing nodes where a
433 -- value of zero can represent either an empty node or an empty list.
435 Error_List
: constant List_Id
:= List_Low_Bound
;
436 -- Used to indicate that there was an error in the source program in a
437 -- context which would normally require a list. This node appears to be
438 -- an empty list to the list operations (a null list is actually allocated
439 -- which has this Id value).
441 First_List_Id
: constant List_Id
:= Error_List
;
442 -- Subscript of first allocated list header
444 ------------------------------
445 -- Types for Elists Package --
446 ------------------------------
448 -- Element list Id values are used to identify element lists stored outside
449 -- of the tree, allowing nodes to be members of more than one such list
450 -- (see package Elists for further details).
452 type Elist_Id
is range Elist_Low_Bound
.. Elist_High_Bound
;
453 -- Type used to identify an element list (Elist header table subscript)
455 No_Elist
: constant Elist_Id
:= Elist_Low_Bound
;
456 -- Used to indicate absence of an element list. Note that this is not an
457 -- actual Elist header, so element list operations on this value are not
460 First_Elist_Id
: constant Elist_Id
:= No_Elist
+ 1;
461 -- Subscript of first allocated Elist header
463 -- Element Id values are used to identify individual elements of an element
464 -- list (see package Elists for further details).
466 type Elmt_Id
is range Elmt_Low_Bound
.. Elmt_High_Bound
;
467 -- Type used to identify an element list
469 No_Elmt
: constant Elmt_Id
:= Elmt_Low_Bound
;
470 -- Used to represent empty element
472 First_Elmt_Id
: constant Elmt_Id
:= No_Elmt
+ 1;
473 -- Subscript of first allocated Elmt table entry
475 -------------------------------
476 -- Types for Stringt Package --
477 -------------------------------
479 -- String_Id values are used to identify entries in the strings table. They
480 -- are subscripts into the Strings table defined in package Stringt.
482 -- Note that with only a few exceptions, which are clearly documented, the
483 -- type String_Id should be regarded as a private type. In particular it is
484 -- never appropriate to perform arithmetic operations using this type.
485 -- Doesn't this also apply to all other *_Id types???
487 type String_Id
is range Strings_Low_Bound
.. Strings_High_Bound
;
488 -- Type used to identify entries in the strings table
490 No_String
: constant String_Id
:= Strings_Low_Bound
;
491 -- Used to indicate missing string Id. Note that the value zero is used
492 -- to indicate a missing data value for all the Int types in this section.
494 First_String_Id
: constant String_Id
:= No_String
+ 1;
495 -- First subscript allocated in string table
497 -------------------------
498 -- Character Code Type --
499 -------------------------
501 -- The type Char is used for character data internally in the compiler, but
502 -- character codes in the source are represented by the Char_Code type.
503 -- Each character literal in the source is interpreted as being one of the
504 -- 16#7FFF_FFFF# possible Wide_Wide_Character codes, and a unique Integer
505 -- value is assigned, corresponding to the UTF-32 value, which also
506 -- corresponds to the Pos value in the Wide_Wide_Character type, and also
507 -- corresponds to the Pos value in the Wide_Character and Character types
508 -- for values that are in appropriate range. String literals are similarly
509 -- interpreted as a sequence of such codes.
511 type Char_Code_Base
is mod 2 ** 32;
512 for Char_Code_Base
'Size use 32;
514 subtype Char_Code
is Char_Code_Base
range 0 .. 16#
7FFF_FFFF#
;
515 for Char_Code
'Value_Size use 32;
516 for Char_Code
'Object_Size use 32;
518 function Get_Char_Code
(C
: Character) return Char_Code
;
519 pragma Inline
(Get_Char_Code
);
520 -- Function to obtain internal character code from source character. For
521 -- the moment, the internal character code is simply the Pos value of the
522 -- input source character, but we provide this interface for possible
523 -- later support of alternative character sets.
525 function In_Character_Range
(C
: Char_Code
) return Boolean;
526 pragma Inline
(In_Character_Range
);
527 -- Determines if the given character code is in range of type Character,
528 -- and if so, returns True. If not, returns False.
530 function In_Wide_Character_Range
(C
: Char_Code
) return Boolean;
531 pragma Inline
(In_Wide_Character_Range
);
532 -- Determines if the given character code is in range of the type
533 -- Wide_Character, and if so, returns True. If not, returns False.
535 function Get_Character
(C
: Char_Code
) return Character;
536 pragma Inline
(Get_Character
);
537 -- For a character C that is in Character range (see above function), this
538 -- function returns the corresponding Character value. It is an error to
539 -- call Get_Character if C is not in Character range.
541 function Get_Wide_Character
(C
: Char_Code
) return Wide_Character;
542 -- For a character C that is in Wide_Character range (see above function),
543 -- this function returns the corresponding Wide_Character value. It is an
544 -- error to call Get_Wide_Character if C is not in Wide_Character range.
546 ---------------------------------------
547 -- Types used for Library Management --
548 ---------------------------------------
550 type Unit_Number_Type
is new Int
;
551 -- Unit number. The main source is unit 0, and subsidiary sources have
552 -- non-zero numbers starting with 1. Unit numbers are used to index the
553 -- Units table in package Lib.
555 Main_Unit
: constant Unit_Number_Type
:= 0;
556 -- Unit number value for main unit
558 No_Unit
: constant Unit_Number_Type
:= -1;
559 -- Special value used to signal no unit
561 type Source_File_Index
is new Int
range -1 .. Int
'Last;
562 -- Type used to index the source file table (see package Sinput)
564 Internal_Source_File
: constant Source_File_Index
:=
565 Source_File_Index
'First;
566 -- Value used to indicate the buffer for the source-code-like strings
567 -- internally created withing the compiler (see package Sinput)
569 No_Source_File
: constant Source_File_Index
:= 0;
570 -- Value used to indicate no source file present
572 -----------------------------------
573 -- Representation of Time Stamps --
574 -----------------------------------
576 -- All compiled units are marked with a time stamp which is derived from
577 -- the source file (we assume that the host system has the concept of a
578 -- file time stamp which is modified when a file is modified). These
579 -- time stamps are used to ensure consistency of the set of units that
580 -- constitutes a library. Time stamps are 12 character strings with
581 -- with the following format:
586 -- MM month (2 digits 01-12)
587 -- DD day (2 digits 01-31)
588 -- HH hour (2 digits 00-23)
589 -- MM minutes (2 digits 00-59)
590 -- SS seconds (2 digits 00-59)
592 -- In the case of Unix systems (and other systems which keep the time in
593 -- GMT), the time stamp is the GMT time of the file, not the local time.
594 -- This solves problems in using libraries across networks with clients
595 -- spread across multiple time-zones.
597 Time_Stamp_Length
: constant := 14;
598 -- Length of time stamp value
600 subtype Time_Stamp_Index
is Natural range 1 .. Time_Stamp_Length
;
601 type Time_Stamp_Type
is new String (Time_Stamp_Index
);
602 -- Type used to represent time stamp
604 Empty_Time_Stamp
: constant Time_Stamp_Type
:= (others => ' ');
605 -- Value representing an empty or missing time stamp. Looks less than any
606 -- real time stamp if two time stamps are compared. Note that although this
607 -- is not private, clients should not rely on the exact way in which this
608 -- string is represented, and instead should use the subprograms below.
610 Dummy_Time_Stamp
: constant Time_Stamp_Type
:= (others => '0');
611 -- This is used for dummy time stamp values used in the D lines for
612 -- non-existent files, and is intended to be an impossible value.
614 function "=" (Left
, Right
: Time_Stamp_Type
) return Boolean;
615 function "<=" (Left
, Right
: Time_Stamp_Type
) return Boolean;
616 function ">=" (Left
, Right
: Time_Stamp_Type
) return Boolean;
617 function "<" (Left
, Right
: Time_Stamp_Type
) return Boolean;
618 function ">" (Left
, Right
: Time_Stamp_Type
) return Boolean;
619 -- Comparison functions on time stamps. Note that two time stamps are
620 -- defined as being equal if they have the same day/month/year and the
621 -- hour/minutes/seconds values are within 2 seconds of one another. This
622 -- deals with rounding effects in library file time stamps caused by
623 -- copying operations during installation. We have particularly noticed
624 -- that WinNT seems susceptible to such changes.
626 -- Note : the Empty_Time_Stamp value looks equal to itself, and less than
627 -- any non-empty time stamp value.
629 procedure Split_Time_Stamp
630 (TS
: Time_Stamp_Type
;
637 -- Given a time stamp, decompose it into its components
639 procedure Make_Time_Stamp
646 TS
: out Time_Stamp_Type
);
647 -- Given the components of a time stamp, initialize the value
649 -------------------------------------
650 -- Types used for Check Management --
651 -------------------------------------
653 type Check_Id
is new Nat
;
654 -- Type used to represent a check id
656 No_Check_Id
: constant := 0;
657 -- Check_Id value used to indicate no check
659 Access_Check
: constant := 1;
660 Accessibility_Check
: constant := 2;
661 Alignment_Check
: constant := 3;
662 Atomic_Synchronization
: constant := 4;
663 Discriminant_Check
: constant := 5;
664 Division_Check
: constant := 6;
665 Elaboration_Check
: constant := 7;
666 Index_Check
: constant := 8;
667 Length_Check
: constant := 9;
668 Overflow_Check
: constant := 10;
669 Range_Check
: constant := 11;
670 Storage_Check
: constant := 12;
671 Tag_Check
: constant := 13;
672 Validity_Check
: constant := 14;
673 -- Values used to represent individual predefined checks (including the
674 -- setting of Atomic_Synchronization, which is implemented internally using
675 -- a "check" whose name is Atomic_Synchronization.
677 All_Checks
: constant := 15;
678 -- Value used to represent All_Checks value
680 subtype Predefined_Check_Id
is Check_Id
range 1 .. All_Checks
;
681 -- Subtype for predefined checks, including All_Checks
683 -- The following array contains an entry for each recognized check name
684 -- for pragma Suppress. It is used to represent current settings of scope
685 -- based suppress actions from pragma Suppress or command line settings.
687 -- Note: when Suppress_Array (All_Checks) is True, then generally all other
688 -- specific check entries are set True, except for the Elaboration_Check
689 -- entry which is set only if an explicit Suppress for this check is given.
690 -- The reason for this non-uniformity is that we do not want All_Checks to
691 -- suppress elaboration checking when using the static elaboration model.
692 -- We recognize only an explicit suppress of Elaboration_Check as a signal
693 -- that the static elaboration checking should skip a compile time check.
695 type Suppress_Array
is array (Predefined_Check_Id
) of Boolean;
696 pragma Pack
(Suppress_Array
);
698 -- To add a new check type to GNAT, the following steps are required:
700 -- 1. Add an entry to Snames spec and body for the new name
701 -- 2. Add an entry to the definition of Check_Id above
702 -- 3. Add a new function to Checks to handle the new check test
703 -- 4. Add a new Do_xxx_Check flag to Sinfo (if required)
704 -- 5. Add appropriate checks for the new test
706 -- The following provides precise details on the mode used to generate
707 -- code for intermediate operations in expressions for signed integer
708 -- arithmetic (and how to generate overflow checks if enabled). Note
709 -- that this only affects handling of intermediate results. The final
710 -- result must always fit within the target range, and if overflow
711 -- checking is enabled, the check on the final result is against this
714 type Overflow_Mode_Type
is (
716 -- Dummy value used during initialization process to show that the
717 -- corresponding value has not yet been initialized.
720 -- Operations are done in the base type of the subexpression. If
721 -- overflow checks are enabled, then the check is against the range
722 -- of this base type.
725 -- Where appropriate, intermediate arithmetic operations are performed
726 -- with an extended range, using Long_Long_Integer if necessary. If
727 -- overflow checking is enabled, then the check is against the range
728 -- of Long_Long_Integer.
731 -- In this mode arbitrary precision arithmetic is used as needed to
732 -- ensure that it is impossible for intermediate arithmetic to cause an
733 -- overflow. In this mode, intermediate expressions are not affected by
734 -- the overflow checking mode, since overflows are eliminated.
736 subtype Minimized_Or_Eliminated
is
737 Overflow_Mode_Type
range Minimized
.. Eliminated
;
738 -- Define subtype so that clients don't need to know ordering. Note that
739 -- Overflow_Mode_Type is not marked as an ordered enumeration type.
741 -- The following structure captures the state of check suppression or
742 -- activation at a particular point in the program execution.
744 type Suppress_Record
is record
745 Suppress
: Suppress_Array
;
746 -- Indicates suppression status of each possible check
748 Overflow_Mode_General
: Overflow_Mode_Type
;
749 -- This field indicates the mode for handling code generation and
750 -- overflow checking (if enabled) for intermediate expression values.
751 -- This applies to general expressions outside assertions.
753 Overflow_Mode_Assertions
: Overflow_Mode_Type
;
754 -- This field indicates the mode for handling code generation and
755 -- overflow checking (if enabled) for intermediate expression values.
756 -- This applies to any expression occuring inside assertions.
759 -----------------------------------
760 -- Global Exception Declarations --
761 -----------------------------------
763 -- This section contains declarations of exceptions that are used
764 -- throughout the compiler or in other GNAT tools.
766 Unrecoverable_Error
: exception;
767 -- This exception is raised to immediately terminate the compilation of the
768 -- current source program. Used in situations where things are bad enough
769 -- that it doesn't seem worth continuing (e.g. max errors reached, or a
770 -- required file is not found). Also raised when the compiler finds itself
771 -- in trouble after an error (see Comperr).
773 Terminate_Program
: exception;
774 -- This exception is raised to immediately terminate the tool being
775 -- executed. Each tool where this exception may be raised must have a
776 -- single exception handler that contains only a null statement and that is
777 -- the last statement of the program. If needed, procedure Set_Exit_Status
778 -- is called with the appropriate exit status before raising
779 -- Terminate_Program.
781 ---------------------------------
782 -- Parameter Mechanism Control --
783 ---------------------------------
785 -- Function and parameter entities have a field that records the passing
786 -- mechanism. See specification of Sem_Mech for full details. The following
787 -- subtype is used to represent values of this type:
789 subtype Mechanism_Type
is Int
range -18 .. Int
'Last;
790 -- Type used to represent a mechanism value. This is a subtype rather than
791 -- a type to avoid some annoying processing problems with certain routines
792 -- in Einfo (processing them to create the corresponding C).
794 ------------------------------
795 -- Run-Time Exception Codes --
796 ------------------------------
798 -- When the code generator generates a run-time exception, it provides a
799 -- reason code which is one of the following. This reason code is used to
800 -- select the appropriate run-time routine to be called, determining both
801 -- the exception to be raised, and the message text to be added.
803 -- The prefix CE/PE/SE indicates the exception to be raised
804 -- CE = Constraint_Error
805 -- PE = Program_Error
806 -- SE = Storage_Error
808 -- The remaining part of the name indicates the message text to be added,
809 -- where all letters are lower case, and underscores are converted to
810 -- spaces (for example CE_Invalid_Data adds the text "invalid data").
812 -- To add a new code, you need to do the following:
814 -- 1. Modify the type and subtype declarations below appropriately,
815 -- keeping things in alphabetical order.
817 -- 2. Modify the corresponding definitions in types.h, including the
818 -- definition of last_reason_code.
820 -- 3. Add the name of the routines in exp_ch11.Get_RT_Exception_Name
822 -- 4. Add a new routine in Ada.Exceptions with the appropriate call and
823 -- static string constant. Note that there is more than one version
824 -- of a-except.adb which must be modified.
826 type RT_Exception_Code
is
827 (CE_Access_Check_Failed
, -- 00
828 CE_Access_Parameter_Is_Null
, -- 01
829 CE_Discriminant_Check_Failed
, -- 02
830 CE_Divide_By_Zero
, -- 03
831 CE_Explicit_Raise
, -- 04
832 CE_Index_Check_Failed
, -- 05
833 CE_Invalid_Data
, -- 06
834 CE_Length_Check_Failed
, -- 07
835 CE_Null_Exception_Id
, -- 08
836 CE_Null_Not_Allowed
, -- 09
837 CE_Overflow_Check_Failed
, -- 10
838 CE_Partition_Check_Failed
, -- 11
839 CE_Range_Check_Failed
, -- 12
840 CE_Tag_Check_Failed
, -- 13
842 PE_Access_Before_Elaboration
, -- 14
843 PE_Accessibility_Check_Failed
, -- 15
844 PE_Address_Of_Intrinsic
, -- 16
845 PE_All_Guards_Closed
, -- 17
846 PE_Bad_Predicated_Generic_Type
, -- 18
847 PE_Current_Task_In_Entry_Body
, -- 19
848 PE_Duplicated_Entry_Address
, -- 20
849 PE_Explicit_Raise
, -- 21
850 PE_Finalize_Raised_Exception
, -- 22
851 PE_Implicit_Return
, -- 23
852 PE_Misaligned_Address_Value
, -- 24
853 PE_Missing_Return
, -- 25
854 PE_Overlaid_Controlled_Object
, -- 26
855 PE_Potentially_Blocking_Operation
, -- 27
856 PE_Stubbed_Subprogram_Called
, -- 28
857 PE_Unchecked_Union_Restriction
, -- 29
858 PE_Non_Transportable_Actual
, -- 30
860 SE_Empty_Storage_Pool
, -- 31
861 SE_Explicit_Raise
, -- 32
862 SE_Infinite_Recursion
, -- 33
863 SE_Object_Too_Large
); -- 34
865 subtype RT_CE_Exceptions
is RT_Exception_Code
range
866 CE_Access_Check_Failed
..
869 subtype RT_PE_Exceptions
is RT_Exception_Code
range
870 PE_Access_Before_Elaboration
..
871 PE_Non_Transportable_Actual
;
873 subtype RT_SE_Exceptions
is RT_Exception_Code
range
874 SE_Empty_Storage_Pool
..