* c-c++-common/ubsan/float-cast-overflow-6.c: Add i?86-*-* target.
[official-gcc.git] / zlib / minigzip.c
blob7aa1c0f4ddd088c3589f85fcb4c8d14d0e45e093
1 /* minigzip.c -- simulate gzip using the zlib compression library
2 * Copyright (C) 1995-2006, 2010 Jean-loup Gailly.
3 * For conditions of distribution and use, see copyright notice in zlib.h
4 */
6 /*
7 * minigzip is a minimal implementation of the gzip utility. This is
8 * only an example of using zlib and isn't meant to replace the
9 * full-featured gzip. No attempt is made to deal with file systems
10 * limiting names to 14 or 8+3 characters, etc... Error checking is
11 * very limited. So use minigzip only for testing; use gzip for the
12 * real thing. On MSDOS, use only on file names without extension
13 * or in pipe mode.
16 /* @(#) $Id: minigzip.c,v 1.1.1.2 2002/03/11 21:53:26 tromey Exp $ */
18 #include "zlib.h"
19 #include <stdio.h>
21 #ifdef STDC
22 # include <string.h>
23 # include <stdlib.h>
24 #endif
26 #ifdef USE_MMAP
27 # include <sys/types.h>
28 # include <sys/mman.h>
29 # include <sys/stat.h>
30 #endif
32 #if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
33 # include <fcntl.h>
34 # include <io.h>
35 # ifdef UNDER_CE
36 # include <stdlib.h>
37 # endif
38 # define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
39 #else
40 # define SET_BINARY_MODE(file)
41 #endif
43 #ifdef VMS
44 # define unlink delete
45 # define GZ_SUFFIX "-gz"
46 #endif
47 #ifdef RISCOS
48 # define unlink remove
49 # define GZ_SUFFIX "-gz"
50 # define fileno(file) file->__file
51 #endif
52 #if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
53 # include <unix.h> /* for fileno */
54 #endif
56 #if !defined(Z_HAVE_UNISTD_H) && !defined(_LARGEFILE64_SOURCE)
57 #ifndef WIN32 /* unlink already in stdio.h for WIN32 */
58 extern int unlink OF((const char *));
59 #endif
60 #endif
62 #if defined(UNDER_CE)
63 # include <windows.h>
64 # define perror(s) pwinerror(s)
66 /* Map the Windows error number in ERROR to a locale-dependent error
67 message string and return a pointer to it. Typically, the values
68 for ERROR come from GetLastError.
70 The string pointed to shall not be modified by the application,
71 but may be overwritten by a subsequent call to strwinerror
73 The strwinerror function does not change the current setting
74 of GetLastError. */
76 static char *strwinerror (error)
77 DWORD error;
79 static char buf[1024];
81 wchar_t *msgbuf;
82 DWORD lasterr = GetLastError();
83 DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM
84 | FORMAT_MESSAGE_ALLOCATE_BUFFER,
85 NULL,
86 error,
87 0, /* Default language */
88 (LPVOID)&msgbuf,
90 NULL);
91 if (chars != 0) {
92 /* If there is an \r\n appended, zap it. */
93 if (chars >= 2
94 && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') {
95 chars -= 2;
96 msgbuf[chars] = 0;
99 if (chars > sizeof (buf) - 1) {
100 chars = sizeof (buf) - 1;
101 msgbuf[chars] = 0;
104 wcstombs(buf, msgbuf, chars + 1);
105 LocalFree(msgbuf);
107 else {
108 sprintf(buf, "unknown win32 error (%ld)", error);
111 SetLastError(lasterr);
112 return buf;
115 static void pwinerror (s)
116 const char *s;
118 if (s && *s)
119 fprintf(stderr, "%s: %s\n", s, strwinerror(GetLastError ()));
120 else
121 fprintf(stderr, "%s\n", strwinerror(GetLastError ()));
124 #endif /* UNDER_CE */
126 #ifndef GZ_SUFFIX
127 # define GZ_SUFFIX ".gz"
128 #endif
129 #define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1)
131 #define BUFLEN 16384
132 #define MAX_NAME_LEN 1024
134 #ifdef MAXSEG_64K
135 # define local static
136 /* Needed for systems with limitation on stack size. */
137 #else
138 # define local
139 #endif
141 char *prog;
143 void error OF((const char *msg));
144 void gz_compress OF((FILE *in, gzFile out));
145 #ifdef USE_MMAP
146 int gz_compress_mmap OF((FILE *in, gzFile out));
147 #endif
148 void gz_uncompress OF((gzFile in, FILE *out));
149 void file_compress OF((char *file, char *mode));
150 void file_uncompress OF((char *file));
151 int main OF((int argc, char *argv[]));
153 /* ===========================================================================
154 * Display error message and exit
156 void error(msg)
157 const char *msg;
159 fprintf(stderr, "%s: %s\n", prog, msg);
160 exit(1);
163 /* ===========================================================================
164 * Compress input to output then close both files.
167 void gz_compress(in, out)
168 FILE *in;
169 gzFile out;
171 local char buf[BUFLEN];
172 int len;
173 int err;
175 #ifdef USE_MMAP
176 /* Try first compressing with mmap. If mmap fails (minigzip used in a
177 * pipe), use the normal fread loop.
179 if (gz_compress_mmap(in, out) == Z_OK) return;
180 #endif
181 for (;;) {
182 len = (int)fread(buf, 1, sizeof(buf), in);
183 if (ferror(in)) {
184 perror("fread");
185 exit(1);
187 if (len == 0) break;
189 if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err));
191 fclose(in);
192 if (gzclose(out) != Z_OK) error("failed gzclose");
195 #ifdef USE_MMAP /* MMAP version, Miguel Albrecht <malbrech@eso.org> */
197 /* Try compressing the input file at once using mmap. Return Z_OK if
198 * if success, Z_ERRNO otherwise.
200 int gz_compress_mmap(in, out)
201 FILE *in;
202 gzFile out;
204 int len;
205 int err;
206 int ifd = fileno(in);
207 caddr_t buf; /* mmap'ed buffer for the entire input file */
208 off_t buf_len; /* length of the input file */
209 struct stat sb;
211 /* Determine the size of the file, needed for mmap: */
212 if (fstat(ifd, &sb) < 0) return Z_ERRNO;
213 buf_len = sb.st_size;
214 if (buf_len <= 0) return Z_ERRNO;
216 /* Now do the actual mmap: */
217 buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0);
218 if (buf == (caddr_t)(-1)) return Z_ERRNO;
220 /* Compress the whole file at once: */
221 len = gzwrite(out, (char *)buf, (unsigned)buf_len);
223 if (len != (int)buf_len) error(gzerror(out, &err));
225 munmap(buf, buf_len);
226 fclose(in);
227 if (gzclose(out) != Z_OK) error("failed gzclose");
228 return Z_OK;
230 #endif /* USE_MMAP */
232 /* ===========================================================================
233 * Uncompress input to output then close both files.
235 void gz_uncompress(in, out)
236 gzFile in;
237 FILE *out;
239 local char buf[BUFLEN];
240 int len;
241 int err;
243 for (;;) {
244 len = gzread(in, buf, sizeof(buf));
245 if (len < 0) error (gzerror(in, &err));
246 if (len == 0) break;
248 if ((int)fwrite(buf, 1, (unsigned)len, out) != len) {
249 error("failed fwrite");
252 if (fclose(out)) error("failed fclose");
254 if (gzclose(in) != Z_OK) error("failed gzclose");
258 /* ===========================================================================
259 * Compress the given file: create a corresponding .gz file and remove the
260 * original.
262 void file_compress(file, mode)
263 char *file;
264 char *mode;
266 local char outfile[MAX_NAME_LEN];
267 FILE *in;
268 gzFile out;
270 if (strlen(file) + strlen(GZ_SUFFIX) >= sizeof(outfile)) {
271 fprintf(stderr, "%s: filename too long\n", prog);
272 exit(1);
275 strcpy(outfile, file);
276 strcat(outfile, GZ_SUFFIX);
278 in = fopen(file, "rb");
279 if (in == NULL) {
280 perror(file);
281 exit(1);
283 out = gzopen(outfile, mode);
284 if (out == NULL) {
285 fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile);
286 exit(1);
288 gz_compress(in, out);
290 unlink(file);
294 /* ===========================================================================
295 * Uncompress the given file and remove the original.
297 void file_uncompress(file)
298 char *file;
300 local char buf[MAX_NAME_LEN];
301 char *infile, *outfile;
302 FILE *out;
303 gzFile in;
304 size_t len = strlen(file);
306 if (len + strlen(GZ_SUFFIX) >= sizeof(buf)) {
307 fprintf(stderr, "%s: filename too long\n", prog);
308 exit(1);
311 strcpy(buf, file);
313 if (len > SUFFIX_LEN && strcmp(file+len-SUFFIX_LEN, GZ_SUFFIX) == 0) {
314 infile = file;
315 outfile = buf;
316 outfile[len-3] = '\0';
317 } else {
318 outfile = file;
319 infile = buf;
320 strcat(infile, GZ_SUFFIX);
322 in = gzopen(infile, "rb");
323 if (in == NULL) {
324 fprintf(stderr, "%s: can't gzopen %s\n", prog, infile);
325 exit(1);
327 out = fopen(outfile, "wb");
328 if (out == NULL) {
329 perror(file);
330 exit(1);
333 gz_uncompress(in, out);
335 unlink(infile);
339 /* ===========================================================================
340 * Usage: minigzip [-c] [-d] [-f] [-h] [-r] [-1 to -9] [files...]
341 * -c : write to standard output
342 * -d : decompress
343 * -f : compress with Z_FILTERED
344 * -h : compress with Z_HUFFMAN_ONLY
345 * -r : compress with Z_RLE
346 * -1 to -9 : compression level
349 int main(argc, argv)
350 int argc;
351 char *argv[];
353 int copyout = 0;
354 int uncompr = 0;
355 gzFile file;
356 char *bname, outmode[20];
358 strcpy(outmode, "wb6 ");
360 prog = argv[0];
361 bname = strrchr(argv[0], '/');
362 if (bname)
363 bname++;
364 else
365 bname = argv[0];
366 argc--, argv++;
368 if (!strcmp(bname, "gunzip"))
369 uncompr = 1;
370 else if (!strcmp(bname, "zcat"))
371 copyout = uncompr = 1;
373 while (argc > 0) {
374 if (strcmp(*argv, "-c") == 0)
375 copyout = 1;
376 else if (strcmp(*argv, "-d") == 0)
377 uncompr = 1;
378 else if (strcmp(*argv, "-f") == 0)
379 outmode[3] = 'f';
380 else if (strcmp(*argv, "-h") == 0)
381 outmode[3] = 'h';
382 else if (strcmp(*argv, "-r") == 0)
383 outmode[3] = 'R';
384 else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' &&
385 (*argv)[2] == 0)
386 outmode[2] = (*argv)[1];
387 else
388 break;
389 argc--, argv++;
391 if (outmode[3] == ' ')
392 outmode[3] = 0;
393 if (argc == 0) {
394 SET_BINARY_MODE(stdin);
395 SET_BINARY_MODE(stdout);
396 if (uncompr) {
397 file = gzdopen(fileno(stdin), "rb");
398 if (file == NULL) error("can't gzdopen stdin");
399 gz_uncompress(file, stdout);
400 } else {
401 file = gzdopen(fileno(stdout), outmode);
402 if (file == NULL) error("can't gzdopen stdout");
403 gz_compress(stdin, file);
405 } else {
406 if (copyout) {
407 SET_BINARY_MODE(stdout);
409 do {
410 if (uncompr) {
411 if (copyout) {
412 file = gzopen(*argv, "rb");
413 if (file == NULL)
414 fprintf(stderr, "%s: can't gzopen %s\n", prog, *argv);
415 else
416 gz_uncompress(file, stdout);
417 } else {
418 file_uncompress(*argv);
420 } else {
421 if (copyout) {
422 FILE * in = fopen(*argv, "rb");
424 if (in == NULL) {
425 perror(*argv);
426 } else {
427 file = gzdopen(fileno(stdout), outmode);
428 if (file == NULL) error("can't gzdopen stdout");
430 gz_compress(in, file);
433 } else {
434 file_compress(*argv, outmode);
437 } while (argv++, --argc);
439 return 0;