2012-11-19 Michael Meissner <meissner@linux.vnet.ibm.com>

[official-gcc.git] / gcc / ChangeLog

2012-11-19  Michael Meissner  <meissner@linux.vnet.ibm.com>

        * config/rs6000/rs6000.md (movdf_hardfloat32): Reorder move
        constraints so that the traditional floating point loads, stores,
        and moves are done first, then the VSX loads, stores, and moves,
        and finally the GPR loads, stores, and moves so that reload
        chooses FPRs over GPRs, and uses the traditional load/store
        instructions which provide an offset.
        (movdf_hardfloat64): Likewise.

2012-11-19  Richard Sandiford  <rdsandiford@googlemail.com>

        PR middle-end/55359
        * simplify-rtx.c (simplify_subreg): Return null for invalid offsets.

2012-11-19  Aldy Hernandez  <aldyh@redhat.com>

        * trans-mem.c (execute_tm_mark): Release bb_regions.

2012-11-19  Aldy Hernandez  <aldyh@redhat.com>

        * trans-mem (collect_bb2reg): Stop scanning at irrevocable blocks.
        (get_bb_regions_instrumented): Add new traverse_clone argument and
        use it.
        (expand_regions_1): Same.
        (expand_region): Same.
        (execute_tm_mark): Pass new argument to expand_regions.
        (expand_block_edges): Pass new argument to
        get_bb_regions_instrumented.

2012-11-19  Sofiane Naci  <sofiane.naci@arm.com>

        * config/aarch64/aarch64.c
        (aarch64_output_mi_thunk): Refactor to generate RTL patterns.

2012-11-19  Mans Rullgard  <mans@mansr.com>

        PR target/55276
        * config/rs6000/rs6000.c (rs6000_stack_info): Always set vrsave_mask
        for TARGET_ALTIVEC_ABI.  Zero vrsave_save_offset if
        !TARGET_ALTIVEC_VRSAVE.
        (rs6000_emit_prologue): For SAVE_INLINE_VLRs, check vrsave_size
        not vrsave_mask.

2012-11-19  David Edelsohn  <dje.gcc@gmail.com>

        PR bootstrap/55384
        * system.h (vec_free): Undef.

2012-11-19  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/54630
        * tree-ssa-coalesce.c (coalesce_ssa_name): Remove static
        keyword from ssa_name_hash var.

2012-11-19  Maxim Kuznetsov  <maxim.kuznetsov@intel.com>
            Kirill Yukhin  <kirill.yukhin@intel.com>
            Michael Zolotukhin  <michael.v.zolotukhin@intel.com>

        * doc/md.texi: Document define_subst.
        * gensupport.c (MAX_OPERANDS): New define.
        (operand_data): New.
        (match_operand_entries_in_pattern): New.
        (used_operands_numbers): New.
        (subst_true): New.
        (subst_false): New.
        (define_subst_queue): New.
        (define_subst_tail): New.
        (define_subst_attr_queue): New.
        (define_subst_attr_tail): New.
        (has_subst_attribute): New.
        (subst_pattern_match): New.
        (get_alternatives_number): New.
        (alter_output_for_subst_insn): New.
        (alter_attrs_for_subst_insn): New.
        (process_substs_on_one_elem): New.
        (subst_dup): New.
        (process_define_subst): New.
        (duplicate_alternatives): New.
        (duplicate_each_alternative): New.
        (constraints_handler_t): New typedef.
        (alter_constraints): New.
        (adjust_operands_numbers): New.
        (replace_duplicating_operands_in_pattern): New.
        (remove_from_queue): New.
        (process_rtx): Handle define_subst and define_subst_attr.
        (change_subst_attribute): New.
        (alter_predicate_for_insn): Fix formatting.
        (alter_attrs_for_insn): Likewise.
        (alter_output_for_insn): Likewise.
        (mark_operands_from_match_dup): New.
        (mark_operands_used_in_match_dup): New.
        (find_first_unused_number_of_operand): New.
        (renumerate_operands_in_pattern): New.
        (generate_match_dup): New.
        (check_define_attr_duplicates): New.
        (init_rtx_reader_args_cb): Add checking for duplicated attrs and
        processing of define_subst.
        (read_md_rtx): Handle define_subst.
        * read-rtl.c (struct subst_attr_to_iter_mapping): New.
        (substs): New global.
        (apply_subst_iterator): New.
        (bind_subst_iter_and_attr): New.
        (find_subst_iter_by_attr): New.
        (map_attr_string): Handle subst-iterators.
        (add_condition_to_rtx): Handle define_subst.
        (apply_iterators): Likewise.
        (initialize_iterators): Likewise.
        (add_define_attr_for_define_subst): New.
        (add_define_subst_attr): New.
        (read_subst_mapping): New.
        (read_rtx): Handle define_subst_attr.
        (read_rtx_code): Add subst-attributes recognition during reading of
        strings.
        * rtl.def (DEFINE_EXPAND): Add vector of attributes.
        (DEFINE_SUBST): New.
        (DEFINE_SUBST_ATTR): New.

2012-11-19  Tom de Vries  <tom@codesourcery.com>

        PR rtl-optimization/55315

        * rtlanal.c (nonzero_address_p): Don't assume a nonzero address plus a
        const is a nonzero address.

2012-11-18  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/extend.texi: Use @smallexample consistently.  Add @noindent
        when continuing a sentence or paragraph past an example.  Change
        tabs to spaces in examples.

2012-11-18  Richard Sandiford  <rdsandiford@googlemail.com>

        * doc/md.texi (extv@var{m}, extvmisalign@var{m}, extzv@var{m})
        (extzvmisalign@var{m}, insv@var{m}, insvmisalign@var{m}): Document.
        (insv, extv, extzv): Deprecate.
        * optabs.def (insv_optab, extv_optab, extzv_optab)
        (insvmisalign_optab, extvmisalign_optab, extzvmisalign_optab):
        New optabs.
        * optabs.c (get_optab_extraction_insn): New function.
        (get_extraction_insn): Use it.
        * config/mips/mips.md (extv): Split into...
        (extvmisalign<mode>, extv<mode>): ...these new patterns.  Rename
        existing extv<mode> pattern to...
        (*extv<mode>): ...this.
        (extzv): Split into...
        (extzvmisalign<mode>, extzv<mode>): ...these new patterns.  Rename
        existing extzv<mode> pattern to...
        (*extzv<mode>): ...this.
        (insv): Split into...
        (insvmisalign<mode>, insv<mode>): ...these new patterns.  Rename
        existing insv<mode> pattern to...
        (*insv<mode>): ...this.  Use const_int_operand rather than
        immediate_operand.
        * config/mips/mips.c (mips_block_move_straight): Use set_mem_size
        to set the size of BLKmode accesses.
        (mips_get_unaligned_mem): Require OP0 to be a BLKmode memory,
        turning it from an "rtx *" to an rtx.
        (mips_expand_ext_as_unaligned_load): Simplify for new optab
        interface.  Update call to mips_get_unaligned_mem.
        (mips_expand_ins_as_unaligned_store): Update call to
        mips_get_unaligned_mem.

2012-11-18  Richard Sandiford  <rdsandiford@googlemail.com>

        * Makefile.in (recog.o): Add insn-codes.h.
        * expr.h (extraction_pattern): Move to optabs.h.
        (mode_for_extraction): Delete.
        * optabs.h (extraction_insn): New structure.
        (extraction_pattern): Moved from expr.h.
        (get_best_reg_extraction_insn, get_best_mem_extraction_insn): Declare.
        * optabs.c (HAVE_insv, CODE_FOR_insv, HAVE_extv, CODE_FOR_extv)
        (HAVE_extzv, CODE_FOR_extzv): Provide defaults.
        (extraction_type): New enum.
        (get_traditional_extraction_insn, get_extraction_insn)
        (get_best_reg_extraction_insn, get_best_mem_extraction_insn):
        New functions.
        * combine.c (make_extraction): Use get_best_reg_extraction_insn
        instead of mode_for_extraction.
        * expmed.c (HAVE_insv, CODE_FOR_insv, gen_insv, HAVE_extv)
        (CODE_FOR_extv, gen_extv, HAVE_extzv, CODE_FOR_extzv, gen_extzv):
        Remove fallback definitions.
        (mode_for_extraction): Delete.
        (adjust_bit_field_mem_for_reg): New function.
        (store_bit_field_using_insv): Replace OP_MODE parameter with
        an extraction_insn.  Pass struct_mode to narrow_bit_field_mem.
        (extract_bit_field_using_extv): Likewise EXT_MODE.
        (store_bit_field_1): Use get_best_reg_extraction_insn and
        get_best_mem_extraction_insn instead of mode_for_extraction.
        Use adjust_bit_field_mem_for_reg when forcing memory to a
        register and doing a register insertion.  Update calls to
        store_bit_field_using_insv.
        (extract_bit_field_1): Likewise extractions and calls to
        extract_bit_field_using_extv.
        (store_Bit_field): When narrowing to a bitregion, don't use the
        insv mode as a limit.
        * recog.c: (HAVE_extv, CODE_FOR_extv, HAVE_extzv, CODE_FOR_extzv):
        Provide defaults.
        (simplify_while_replacing): Use insn_data instead of
        mode_for_extraction.

2012-11-18  Richard Sandiford  <rdsandiford@googlemail.com>

        * stor-layout.c (bit_field_mode_iterator::bit_field_mode_iterator):
        Set up a default value of bitregion_end_.
        (bit_field_mode_iterator::next_mode): Always apply bitregion_end_
        check.  Include SLOW_UNALIGNED_ACCESS in the alignment check.
        (get_best_mode): Ignore modes that are wider than the alignment.

2012-11-18  Richard Sandiford  <rdsandiford@googlemail.com>

        * machmode.h (bit_field_mode_iterator): New class.
        (get_best_mode): Change final parameter to bool.
        * stor-layout.c (bit_field_mode_iterator::bit_field_mode_iterator)
        (bit_field_mode_iterator::next_mode): New functions, split out from...
        (get_best_mode): ...here.  Change final parameter to bool.
        Use bit_field_mode_iterator.

2012-11-18  Richard Sandiford  <rdsandiford@googlemail.com>

        * expmed.c (narrow_bit_field_mem): New function.
        (store_bit_field_using_insv, store_bit_field_1, store_fixed_bit_field)
        (extract_bit_field_1): Use it.

2012-11-18  Richard Sandiford  <rdsandiford@googlemail.com>

        * expr.h (adjust_address_1): Add a size parameter.
        (adjust_address, adjust_address_nv, adjust_bitfield_address)
        (adjust_bitfield_address_nv): Adjust accordingly.
        (adjust_bitfield_address_size): Define.
        * emit-rtl.c (adjust_address_1): Add a size parameter.
        Use it to set the size if MODE has no size.  Check whether
        the size matches before returning the original memref.
        Require the size to be known for adjust_object.
        (adjust_automodify_address_1, widen_memory_access): Update calls
        to adjust_address_1.

2012-11-18  Richard Sandiford  <rdsandiford@googlemail.com>

        * combine.c (make_extraction): Handle TRUNCATEd INNERs.

2012-11-18  Richard Sandiford  <rdsandiford@googlemail.com>

        * expr.c (expand_assignment): Don't set MEM_KEEP_ALIAS_SET_P here.
        * emit-rtl.c (set_mem_attributes_minus_bitpos): Handle DECL_BIT_FIELDs,
        using their size instead of the COMPONENT_REF's.

2012-11-17  Matthias Klose  <doko@ubuntu.com>

        * config/mips/t-linux64: Add multiarch names in MULTILIB_OSDIRNAMES.

2012-11-17  Diego Novillo  <dnovillo@google.com>

        VEC API overhaul (http://gcc.gnu.org/wiki/cxx-conversion/cxx-vec)

        * vec.c (register_overhead): Convert it into
        member function of vec_prefix.
        (release_overhead): Likewise.
        (calculate_allocation): Likewise.
        (vec_heap_free): Remove.
        (vec_gc_o_reserve_1): Remove.
        (vec_heap_o_reserve_1): Remove.
        (vec_stack_o_reserve_1): Remove.
        (vec_stack_o_reserve_exact): Remove.
        (register_stack_vec): New.
        (stack_vec_register_index): New.
        (unregister_stack_vec): New.
        (vec_assert_fail): Remove.
        * vec.h: Conditionally include ggc.h.  Document conditional
        hackery.
        Update top-level documentation.
        (ALONE_VEC_CHECK_INFO): Remove.
        (VEC_CHECK_INFO): Remove.
        (ALONE_VEC_CHECK_DECL): Remove.
        (VEC_CHECK_DECL): Remove.
        (ALONE_VEC_CHECK_PASS): Remove.
        (VEC_CHECK_PASS): Remove.
        (VEC_ASSERT): Remove.
        (vec_prefix): Add friends va_gc, va_gc_atomic, va_heap and
        va_stack.
        Mark fields alloc_ and num_ as protected.
        (struct vec_t): Remove.  Remove all function members.
        (struct vl_embed): Declare.
        (struct vl_ptr): Declare.
        (free): Remove.
        (reserve_exact): Remove.
        (reserve): Remove.
        (safe_splice): Remove.
        (safe_push): Remove.
        (safe_grow): Remove.
        (safe_grow_cleared): Remove.
        (safe_insert): Remove.
        (DEF_VEC_I): Remove.
        (DEF_VEC_ALLOC_I): Remove.
        (DEF_VEC_P): Remove.
        (DEF_VEC_ALLOC_P): Remove.
        (DEF_VEC_O): Remove.
        (DEF_VEC_ALLOC_O): Remove.
        (DEF_VEC_ALLOC_P_STACK): Remove.
        (DEF_VEC_ALLOC_O_STACK): Remove.
        (DEF_VEC_ALLOC_I_STACK): Remove.
        (DEF_VEC_A): Remove.
        (DEF_VEC_ALLOC_A): Remove.
        (vec_stack_p_reserve_exact_1): Remove.
        (vec_stack_o_reserve): Remove.
        (vec_stack_o_reserve_exact): Remove.
        (VEC_length): Remove.
        (VEC_empty): Remove.
        (VEC_address): Remove.
        (vec_address): Remove.
        (VEC_last): Remove.
        (VEC_index): Remove.
        (VEC_iterate): Remove.
        (VEC_embedded_size): Remove.
        (VEC_embedded_init): Remove.
        (VEC_free): Remove.
        (VEC_copy): Remove.
        (VEC_space): Remove.
        (VEC_reserve): Remove.
        (VEC_reserve_exact): Remove.
        (VEC_splice): Remove.
        (VEC_safe_splice): Remove.
        (VEC_quick_push): Remove.
        (VEC_safe_push): Remove.
        (VEC_pop): Remove.
        (VEC_truncate): Remove.
        (VEC_safe_grow): Remove.
        (VEC_replace): Remove.
        (VEC_quick_insert): Remove.
        (VEC_safe_insert): Remove.
        (VEC_ordered_remove): Remove.
        (VEC_unordered_remove): Remove.
        (VEC_block_remove): Remove.
        (VEC_lower_bound): Remove.
        (VEC_alloc): Remove.
        (VEC_qsort): Remove.

        (va_heap): Declare.
        (va_heap::default_layout): New typedef to vl_ptr.
        (va_heap::reserve): New.
        (va_heap::release): New.
        (va_gc): Declare.
        (va_gc::default_layout): New typedef to vl_embed.
        (va_gc::reserve): New.
        (va_gc::release): New.
        (va_gc_atomic): Declare.  Inherit from va_gc.
        (va_stack): Declare.
        (va_stack::default_layout): New typedef to vl_ptr.
        (va_stack::alloc): New.
        (va_stack::reserve): New.
        (va_stack::release): New.
        (register_stack_vec): Declare.
        (stack_vec_register_index): Declare.
        (unregister_stack_vec): Declare.

        (vec<T, A = va_heap, L = typename A::default_layout>): Declare
        empty vec template.
        (vec<T, A, vl_embed>): Partial specialization for embedded
        layout.
        (vec<T, A, vl_embed>::allocated): New.
        (vec<T, A, vl_embed>::length): New.
        (vec<T, A, vl_embed>::is_empty): New.
        (vec<T, A, vl_embed>::address): New.
        (vec<T, A, vl_embed>::operator[]): New.
        (vec<T, A, vl_embed>::last New.
        (vec<T, A, vl_embed>::space): New.
        (vec<T, A, vl_embed>::iterate): New.
        (vec<T, A, vl_embed>::iterate): New.
        (vec<T, A, vl_embed>::copy): New.
        (vec<T, A, vl_embed>::splice): New.
        (vec<T, A, vl_embed>::quick_push New.
        (vec<T, A, vl_embed>::pop New.
        (vec<T, A, vl_embed>::truncate): New.
        (vec<T, A, vl_embed>::quick_insert): New.
        (vec<T, A, vl_embed>::ordered_remove): New.
        (vec<T, A, vl_embed>::unordered_remove): New.
        (vec<T, A, vl_embed>::block_remove): New.
        (vec<T, A, vl_embed>::qsort): New.
        (vec<T, A, vl_embed>::lower_bound): New.
        (vec<T, A, vl_embed>::embedded_size): New.
        (vec<T, A, vl_embed>::embedded_init): New.
        (vec<T, A, vl_embed>::quick_grow): New.
        (vec<T, A, vl_embed>::quick_grow_cleared): New.
        (vec_safe_space): New.
        (vec_safe_length): New.
        (vec_safe_address): New.
        (vec_safe_is_empty): New.
        (vec_safe_reserve): New.
        (vec_safe_reserve_exact): New.
        (vec_alloc): New.
        (vec_free): New.
        (vec_safe_grow): New.
        (vec_safe_grow_cleared): New.
        (vec_safe_iterate): New.
        (vec_safe_push): New.
        (vec_safe_insert): New.
        (vec_safe_truncate): New.
        (vec_safe_copy): New.
        (vec_safe_splice): New.

        (vec<T, A, vl_ptr>): New partial specialization for the space
        efficient layout.
        (vec<T, A, vl_ptr>::exists): New.
        (vec<T, A, vl_ptr>::is_empty): New.
        (vec<T, A, vl_ptr>::length): New.
        (vec<T, A, vl_ptr>::address): New.
        (vec<T, A, vl_ptr>::operator[]): New.
        (vec<T, A, vl_ptr>::operator!=): New.
        (vec<T, A, vl_ptr>::operator==): New.
        (vec<T, A, vl_ptr>::last): New.
        (vec<T, A, vl_ptr>::space): New.
        (vec<T, A, vl_ptr>::iterate): New.
        (vec<T, A, vl_ptr>::copy): New.
        (vec<T, A, vl_ptr>::reserve): New.
        (vec<T, A, vl_ptr>::reserve_exact): New.
        (vec<T, A, vl_ptr>::splice): New.
        (vec<T, A, vl_ptr>::safe_splice): New.
        (vec<T, A, vl_ptr>::quick_push): New.
        (vec<T, A, vl_ptr>::safe_push): New.
        (vec<T, A, vl_ptr>::pop): New.
        (vec<T, A, vl_ptr>::truncate): New.
        (vec<T, A, vl_ptr>::safe_grow): New.
        (vec<T, A, vl_ptr>::safe_grow_cleared): New.
        (vec<T, A, vl_ptr>::quick_grow): New.
        (vec<T, A, vl_ptr>::quick_grow_cleared): New.
        (vec<T, A, vl_ptr>::quick_insert): New.
        (vec<T, A, vl_ptr>::safe_insert): New.
        (vec<T, A, vl_ptr>::ordered_remove): New.
        (vec<T, A, vl_ptr>::unordered_remove): New.
        (vec<T, A, vl_ptr>::block_remove): New.
        (vec<T, A, vl_ptr>::qsort): New.
        (vec<T, A, vl_ptr>::lower_bound): New.
        (vec_stack_alloc): Define.
        (FOR_EACH_VEC_SAFE_ELT): Define.
        * vecir.h: Remove.  Update all users.
        * vecprim.h: Remove.  Update all users.
        Move uchar to coretypes.h.

        * Makefile.in (VEC_H): Add $(GGC_H).
        Remove vecir.h and vecprim.h dependencies everywhere.

2012-11-16  Diego Novillo  <dnovillo@google.com>

        * gengtype-lex.l (VEC): Remove.
        Add characters in the set [\!\>\.-].
        * gengtype-parse.c (token_names): Remove "VEC".
        (require_template_declaration): Remove handling of VEC_TOKEN.
        (type): Likewise.
        Call create_user_defined_type when parsing GTY((user)).
        * gengtype-state.c (type_lineloc): handle TYPE_UNDEFINED.
        (write_state_undefined_type): New.
        (write_state_type): Call write_state_undefined_type for
        TYPE_UNDEFINED.
        (read_state_type): Call read_state_undefined_type for
        TYPE_UNDEFINED.
        * gengtype.c (dbgprint_count_type_at): Handle TYPE_UNDEFINED.
        (create_user_defined_type): Make extern.
        (type_for_name): Factor out of resolve_typedef.
        (create_undefined_type): New
        (resolve_typedef): Call it when we cannot find a previous
        typedef and the type is not a template.
        (find_structure): Accept TYPE_UNDEFINED.
        (set_gc_used_type): Add argument ALLOWED_UNDEFINED_TYPES,
        default to false.
        Emit an error for TYPE_UNDEFINED unless LEVEL is GC_UNUSED or
        ALLOWED_UNDEFINED_TYPES is set.
        Set ALLOWED_UNDEFINED_TYPES to true for TYPE_USER_STRUCT.
        (filter_type_name): Accept templates with more than one
        argument.
        (output_mangled_typename): Handle TYPE_UNDEFINED
        (walk_type): Likewise.
        (write_types_process_field): Likewise.
        (write_func_for_structure): If CHAIN_NEXT is set, ORIG_S
        should not be a user-defined type.
        (write_types_local_user_process_field): Handle TYPE_ARRAY,
        TYPE_NONE and TYPE_UNDEFINED.
        (write_types_local_process_field): Likewise.
        (contains_scalar_p): Return 0 for TYPE_USER_STRUCT.
        (write_root): Reject user-defined types that are not pointers.
        Handle TYPE_NONE, TYPE_UNDEFINED, TYPE_UNION, TYPE_LANG_STRUCT
        and TYPE_PARAM_STRUCT.
        (output_typename): Handle TYPE_NONE, TYPE_UNDEFINED, and
        TYPE_ARRAY.
        (dump_typekind): Handle TYPE_UNDEFINED.
        * gengtype.h (enum typekind): Add TYPE_UNDEFINED.
        (create_user_defined_type): Declare.
        (enum gty_token): Remove VEC_TOKEN.

2012-11-16  Diego Novillo  <dnovillo@google.com>

        Adjust for new vec API (http://gcc.gnu.org/wiki/cxx-conversion/cxx-vec)

        * coretypes.h (uchar): Define.
        * alias.c: Use new vec API in vec.h.
        * asan.c: Likewise.
        * attribs.c: Likewise.
        * basic-block.h: Likewise.
        * bb-reorder.c: Likewise.
        * builtins.c: Likewise.
        * calls.c: Likewise.
        * cfg.c: Likewise.
        * cfganal.c: Likewise.
        * cfgcleanup.c: Likewise.
        * cfgexpand.c: Likewise.
        * cfghooks.c: Likewise.
        * cfghooks.h: Likewise.
        * cfgloop.c: Likewise.
        * cfgloop.h: Likewise.
        * cfgloopanal.c: Likewise.
        * cfgloopmanip.c: Likewise.
        * cfgrtl.c: Likewise.
        * cgraph.c: Likewise.
        * cgraph.h: Likewise.
        * cgraphclones.c: Likewise.
        * cgraphunit.c: Likewise.
        * combine.c: Likewise.
        * compare-elim.c: Likewise.
        * coverage.c: Likewise.
        * cprop.c: Likewise.
        * data-streamer.h: Likewise.
        * dbxout.c: Likewise.
        * dce.c: Likewise.
        * df-core.c: Likewise.
        * df-problems.c: Likewise.
        * df-scan.c: Likewise.
        * dominance.c: Likewise.
        * domwalk.c: Likewise.
        * domwalk.h: Likewise.
        * dse.c: Likewise.
        * dwarf2cfi.c: Likewise.
        * dwarf2out.c: Likewise.
        * dwarf2out.h: Likewise.
        * emit-rtl.c: Likewise.
        * except.c: Likewise.
        * except.h: Likewise.
        * expr.c: Likewise.
        * expr.h: Likewise.
        * final.c: Likewise.
        * fold-const.c: Likewise.
        * function.c: Likewise.
        * function.h: Likewise.
        * fwprop.c: Likewise.
        * gcc.c: Likewise.
        * gcse.c: Likewise.
        * genattr.c: Likewise.
        * genattrtab.c: Likewise.
        * genautomata.c: Likewise.
        * genextract.c: Likewise.
        * genopinit.c: Likewise
        * ggc-common.c: Likewise.
        * ggc.h: Likewise.
        * gimple-low.c: Likewise.
        * gimple-ssa-strength-reduction.c: Likewise.
        * gimple-streamer-in.c: Likewise.
        * gimple.c: Likewise.
        * gimple.h: Likewise.
        * gimplify.c: Likewise.
        * graph.c: Likewise.
        * graphds.c: Likewise.
        * graphds.h: Likewise.
        * graphite-blocking.c: Likewise.
        * graphite-clast-to-gimple.c: Likewise.
        * graphite-dependences.c: Likewise.
        * graphite-interchange.c: Likewise.
        * graphite-optimize-isl.c: Likewise.
        * graphite-poly.c: Likewise.
        * graphite-poly.h: Likewise.
        * graphite-scop-detection.c: Likewise.
        * graphite-scop-detection.h: Likewise.
        * graphite-sese-to-poly.c: Likewise.
        * graphite.c: Likewise.
        * godump.c: Likewise.
        * haifa-sched.c: Likewise.
        * hw-doloop.c: Likewise.
        * hw-doloop.h: Likewise.
        * ifcvt.c: Likewise.
        * insn-addr.h: Likewise.
        * ipa-cp.c: Likewise.
        * ipa-inline-analysis.c: Likewise.
        * ipa-inline-transform.c: Likewise.
        * ipa-inline.c: Likewise.
        * ipa-inline.h: Likewise.
        * ipa-prop.c: Likewise.
        * ipa-prop.h: Likewise.
        * ipa-pure-const.c: Likewise.
        * ipa-ref-inline.h: Likewise.
        * ipa-ref.c: Likewise.
        * ipa-ref.h: Likewise.
        * ipa-reference.c: Likewise.
        * ipa-split.c: Likewise.
        * ipa-utils.c: Likewise.
        * ipa-utils.h: Likewise.
        * ipa.c: Likewise.
        * ira-build.c: Likewise.
        * ira-color.c: Likewise.
        * ira-emit.c: Likewise.
        * ira-int.h: Likewise.
        * ira.c: Likewise.
        * loop-invariant.c: Likewise.
        * loop-unroll.c: Likewise.
        * lower-subreg.c: Likewise.
        * lra-lives.c: Likewise.
        * lra.c: Likewise.
        * lto-cgraph.c: Likewise.
        * lto-section-out.c: Likewise.
        * lto-streamer-in.c: Likewise.
        * lto-streamer-out.c: Likewise.
        * lto-streamer.h: Likewise.
        * lto-symtab.c: Likewise.
        * mcf.c: Likewise.
        * modulo-sched.c: Likewise.
        * omp-low.c: Likewise.
        * opts-common.c: Likewise.
        * opts-global.c: Likewise.
        * opts.c: Likewise.
        * opts.h: Likewise.
        * passes.c: Likewise.
        * predict.c: Likewise.
        * print-tree.c: Likewise.
        * profile.c: Likewise.
        * profile.h: Likewise.
        * read-rtl.c: Likewise.
        * ree.c: Likewise.
        * reg-stack.c: Likewise.
        * regrename.c: Likewise.
        * regrename.h: Likewise.
        * reload.c: Likewise.
        * reload.h: Likewise.
        * reload1.c: Likewise.
        * rtl.h: Likewise.
        * sched-deps.c: Likewise.
        * sched-int.h: Likewise.
        * sdbout.c: Likewise.
        * sel-sched-dump.c: Likewise.
        * sel-sched-ir.c: Likewise.
        * sel-sched-ir.h: Likewise.
        * sel-sched.c: Likewise.
        * sese.c: Likewise.
        * sese.h: Likewise.
        * statistics.h: Likewise.
        * stmt.c: Likewise.
        * stor-layout.c: Likewise.
        * store-motion.c: Likewise.
        * tlink.c: Likewise.
        * toplev.c: Likewise.
        * trans-mem.c: Likewise.
        * tree-browser.c: Likewise.
        * tree-call-cdce.c: Likewise.
        * tree-cfg.c: Likewise.
        * tree-cfgcleanup.c: Likewise.
        * tree-chrec.c: Likewise.
        * tree-chrec.h: Likewise.
        * tree-complex.c: Likewise.
        * tree-data-ref.c: Likewise.
        * tree-data-ref.h: Likewise.
        * tree-dfa.c: Likewise.
        * tree-diagnostic.c: Likewise.
        * tree-dump.c: Likewise.
        * tree-eh.c: Likewise.
        * tree-emutls.c: Likewise.
        * tree-flow.h: Likewise.
        * tree-if-conv.c: Likewise.
        * tree-inline.c: Likewise.
        * tree-inline.h: Likewise.
        * tree-into-ssa.c: Likewise.
        * tree-iterator.c: Likewise.
        * tree-loop-distribution.c: Likewise.
        * tree-mudflap.c: Likewise.
        * tree-optimize.c: Likewise.
        * tree-outof-ssa.c: Likewise.
        * tree-parloops.c: Likewise.
        * tree-phinodes.c: Likewise.
        * tree-predcom.c: Likewise.
        * tree-pretty-print.c: Likewise.
        * tree-scalar-evolution.c: Likewise.
        * tree-sra.c: Likewise.
        * tree-ssa-address.c: Likewise.
        * tree-ssa-alias.c: Likewise.
        * tree-ssa-ccp.c: Likewise.
        * tree-ssa-coalesce.c: Likewise.
        * tree-ssa-dce.c: Likewise.
        * tree-ssa-dom.c: Likewise.
        * tree-ssa-forwprop.c: Likewise.
        * tree-ssa-live.c: Likewise.
        * tree-ssa-live.h: Likewise.
        * tree-ssa-loop-im.c: Likewise.
        * tree-ssa-loop-ivcanon.c: Likewise.
        * tree-ssa-loop-ivopts.c: Likewise.
        * tree-ssa-loop-manip.c: Likewise.
        * tree-ssa-loop-niter.c: Likewise.
        * tree-ssa-loop-prefetch.c: Likewise.
        * tree-ssa-math-opts.c: Likewise.
        * tree-ssa-operands.c: Likewise.
        * tree-ssa-phiopt.c: Likewise.
        * tree-ssa-phiprop.c: Likewise.
        * tree-ssa-pre.c: Likewise.
        * tree-ssa-propagate.c: Likewise.
        * tree-ssa-reassoc.c: Likewise.
        * tree-ssa-sccvn.c: Likewise.
        * tree-ssa-sccvn.h: Likewise.
        * tree-ssa-strlen.c: Likewise.
        * tree-ssa-structalias.c: Likewise.
        * tree-ssa-tail-merge.c: Likewise.
        * tree-ssa-threadedge.c: Likewise.
        * tree-ssa-threadupdate.c: Likewise.
        * tree-ssa-uncprop.c: Likewise.
        * tree-ssa-uninit.c: Likewise.
        * tree-ssa.c: Likewise.
        * tree-ssanames.c: Likewise.
        * tree-stdarg.c: Likewise.
        * tree-streamer-in.c: Likewise.
        * tree-streamer-out.c: Likewise.
        * tree-streamer.c: Likewise.
        * tree-streamer.h: Likewise.
        * tree-switch-conversion.c: Likewise.
        * tree-vect-data-refs.c: Likewise.
        * tree-vect-generic.c: Likewise.
        * tree-vect-loop-manip.c: Likewise.
        * tree-vect-loop.c: Likewise.
        * tree-vect-patterns.c: Likewise.
        * tree-vect-slp.c: Likewise.
        * tree-vect-stmts.c: Likewise.
        * tree-vectorizer.c: Likewise.
        * tree-vectorizer.h: Likewise.
        * tree-vrp.c: Likewise.
        * tree.c: Likewise.
        * tree.h: Likewise.
        * value-prof.c: Likewise.
        * value-prof.h: Likewise.
        * var-tracking.c: Likewise.
        * varasm.c: Likewise.
        * varpool.c: Likewise.
        * vmsdbgout.c: Likewise.
        * config/bfin/bfin.c: Likewise.
        * config/c6x/c6x.c: Likewise.
        * config/darwin.c: Likewise.
        * config/i386/i386.c: Likewise.
        * config/ia64/ia64.c: Likewise.
        * config/mep/mep.c: Likewise.
        * config/mips/mips.c: Likewise.
        * config/pa/pa.c: Likewise.
        * config/rs6000/rs6000-c.c: Likewise.
        * config/rs6000/rs6000.c: Likewise.
        * config/rx/rx.c: Likewise.
        * config/spu/spu-c.c: Likewise.
        * config/vms/vms.c: Likewise.
        * config/vxworks.c: Likewise.
        * config/epiphany/resolve-sw-modes.c: Likewise.

2012-11-17  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/55236
        * fold-const.c (make_range_step) <case NEGATE_EXPR>: For -fwrapv
        and signed ARG0_TYPE, force low and high to be non-NULL.

2012-11-17  H.J. Lu  <hongjiu.lu@intel.com>

        * common.opt (static-libasan): New option.
        * gcc.c (LIBASAN_SPEC): New macro.
        (LINK_COMMAND_SPEC): Replace -lasan with LIBASAN_SPEC.
        * doc/invoke.texi: Document -static-libasan.

2012-11-17  Vladimir Makarov  <vmakarov@redhat.com>

        PR rtl-optimization/55342
        * lra-assigns.c (spill_for): Try to allocate other reload pseudos
        before and after spilling.

2012-11-16  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/extend.texi: Various copy-edits to comply with GCC coding
        standards for spelling, terminology, and markup, including use of
        American spelling, correct use of terms like "back end" and
        "run time", use correct name for GCC, use "@:" markup.

2012-11-16  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/55329
        * tree-ssa-dom.c (tree_ssa_dominator_optimize): Never clear
        bits in needed_eh_cleanup while iterating over the bitmap.
        Look through all forwarder blocks at once.

2012-11-16  Jan Hubicka  <jh@suse.cz>

        * params.def (max-peeled-insns, max-completely-peeled-insns): Reduce to 100.

2012-11-16  Simon Baldwin  <simonb@google.com>

        * doc/cppopts.texi: Document -f[no-]canonical-system-headers.
        * doc/install.texi: Document --enable-canonical-system-headers.

2012-11-16  Vladimir Makarov  <vmakarov@redhat.com>

        PR rtl-optimization/55330
        * lra-constraints.c (MAX_INHERITANCE_PASSES): New macro.
        (lra_inheritance, lra_undo_inheritance): Use it to limit number of
        the passes.

2012-11-16  Matthias Klose  <doko@ubuntu.com>

        * config/pa/t-linux: New file; define MULTIARCH_DIRNAME.
        * config.gcc <hppa*64*-*-linux*, hppa*-*-linux*> (tmake_file):
        Include pa/t-linux.

2012-11-16  Jakub Jelinek  <jakub@redhat.com>

        PR target/54073
        * config/i386/i386.md (mov<mode>cc): Use comparison_operator
        instead of ordered_comparison_operator resp.
        ix86_fp_comparison_operator predicates.
        * config/i386/i386.c (ix86_expand_fp_movcc): Reject TImode
        or for -m32 DImode comparisons.

2012-11-16  Jan Hubicka  <jh@suse.cz>

        PR tree-optimization/54717
        * tree-ssa-pre.c (do_partial_partial_insertion): Consider also edges
        with ANTIC_IN.

2012-11-16  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386-protos.h (ix86_emit_mode_set): Add third argument.
        * config/i386/i386.h (EMIT_MODE_SET): Update.
        * config/i386/i386.c (ix86_avx_emit_vzeroupper): New function.
        (ix86_emit_mode_set) <AVX_U128>: Call ix86_avx_emit_vzeroupper.

2012-11-16  Ganesh Gopalasubramanian  <Ganesh.Gopalasubramanian@amd.com>

        bdver3 Enablement
        * doc/extend.texi: Add details about bdver3.
        * doc/invoke.texi: Add details about bdver3.
        * config.gcc (i[34567]86-*-linux* | ...): Add bdver3.
        (case ${target}): Add bdver3.
        * config/i386/i386.h (TARGET_BDVER3): New definition.
        * config/i386/i386.md (define_attr "cpu"): Add bdver3.
        * config/i386/sse.md (sseshuf, sseshuf1): New type attributes.
        * config/i386/athlon.md: Handle sseshuf attribute.
        * config/i386/atom.md: Likewise.
        * config/i386/ppro.md: Likewise.
        * config/i386/bdver1.md: Likewise.
        * config/i386/i386.opt (flag_dispatch_scheduler): Add bdver3.
        * config/i386/i386-c.c (ix86_target_macros_internal): Add
        bdver3 def_and_undef
        * config/i386/driver-i386.c (host_detect_local_cpu): Let
        -march=native recognize bdver3 processors.
        * config/i386/i386.c (struct processor_costs bdver3_cost): New.
        (m_BDVER3): New definition.
        (m_AMD_MULTIPLE): Includes m_BDVER3.
        (initial_ix86_tune_features): Add bdver3 tune.
        (processor_target_table): Add bdver3 entry.
        (static const char *const cpu_names): Add bdver3 entry.
        (software_prefetching_beneficial_p): Add bdver3.
        (ix86_option_override_internal): Add bdver3 instruction sets.
        (ix86_option_override_internal): Remove XSAVEOPT for bdver1 and bdver2.
        (ix86_issue_rate): Add bdver3.
        (ix86_adjust_cost): Add bdver3.
        (enum target_cpu_default): Add TARGET_CPU_DEFAULT_bdver3.
        (enum processor_type): Add PROCESSOR_BDVER3.
        * config/i386/bdver3.md: New file describing bdver3 pipelines.

2012-11-15  David S. Miller  <davem@davemloft.net>

        * expmed.c (expand_shift_1): Don't strip non-integral SUBREGs.

        * configure.ac: Add check for assembler SPARC4 instruction support.
        * configure: Rebuild.
        * config.in: Add HAVE_AS_SPARC4 section.
        * config/sparc/sparc.opt (mcbcond): New option.
        * doc/invoke.texi: Document it.
        * config/sparc/constraints.md: New constraint 'A' for 5-bit signed
        immediates.
        * doc/md.texi: Document it.
        * config/sparc/sparc.c (dump_target_flag_bits): Handle MASK_CBCOND.
        (sparc_option_override): Likewise.
        (emit_cbcond_insn): New function.
        (emit_conditional_branch_insn): Call it.
        (emit_cbcond_nop): New function.
        (output_ubranch): Use cbcond, remove label arg.
        (output_cbcond): New function.
        * config/sparc/sparc-protos.h (output_ubranch): Update.
        (output_cbcond): Declare it.
        (emit_cbcond_nop): Likewise.
        * config/sparc/sparc.md (type attribute): New types 'cbcond'
        and uncond_cbcond.
        (emit_cbcond_nop): New attribute.
        (length attribute): Handle cbcond and uncond_cbcond.
        (in_call_delay attribute): Reject cbcond and uncond_cbcond.
        (in_branch_delay attribute): Likewise.
        (in_uncond_branch_delay attribute): Likewise.
        (in_annul_branch_delay attribute): Likewise.
        (*cbcond_sp32, *cbcond_sp64): New insn patterns.
        (jump): Rewrite into an expander.
        (*jump_ubranch, *jump_cbcond): New patterns.
        * config/sparc/niagara4.md: Match 'cbcond' in 'n4_cti'.
        * config/sparc/sparc.h (AS_NIAGARA4_FLAG): New macro, use it
        when target default is niagara4.
        (SPARC_SIMM5_P): Define.
        * config/sparc/sol2.h (AS_SPARC64_FLAG): Adjust.
        (AS_SPARC32_FLAG): Define.
        (ASM_CPU32_DEFAULT_SPEC, ASM_CPU64_DEFAULT_SPEC): Use
        AS_NIAGARA4_FLAG as needed.

2012-11-15  Steve Ellcey  <sellcey@mips.com>

        * expr.c (expand_cond_expr_using_cmove): Use promoted mode for temp.

2012-11-15  Tom de Vries  <tom@codesourcery.com>

        PR tree-optimization/54619
        * tree-ssa-loop-ivopts.c (get_use_type): New function.
        (get_computation_at): Use get_use_type.
        (get_computation_cost_at): Declare and set mem_mode.  Use mem_mode.

2012-11-15  Jakub Jelinek  <jakub@redhat.com>

        * asan.c (report_error_func): Set DECL_IGNORED_P, don't touch
        DECL_ASSEMBLER_NAME.
        (asan_init_func): Likewise.
        (asan_finish_file): Use void * instead of __asan_global * as type of
        __asan_{,un}register_globals.  Set DECL_IGNORED_P on the decls.

2012-11-15  Matthias Klose  <doko@ubuntu.com>

        * Makefile.in (if_multiarch): Don't use a GNU make 3.81 feature.

2012-11-14  Jan Hubicka  <jh@suse.cz>

        PR bootstrap/55051
        * gcov-io.c (gcov_read_summary): Fix array bound check.

2012-11-14  Sterling Augustine  <saugustine@google.com>

        PR debug/55328
        * dwarf2out.c (index_address_table_entry): Check a node's refcount.

2012-11-14  Jan Hubicka  <jh@suse.cz>

        PR bootstrap/55051
        * ipa-inline.c (edge_badness): Improve dumping; fix overflow.

2012-11-14  Matthias Klose  <doko@ubuntu.com>

        * config/sparc/t-linux64: Add multiarch names in MULTILIB_OSDIRNAMES.
        * config/sparc/t-linux: New file; define MULTIARCH_DIRNAME.
        * config.gcc <sparc-*-linux*> (tmake_file): Include sparc/t-linux
        for 32bit non-biarch configurations.

2012-11-14  Matthias Klose  <doko@ubuntu.com>

        * doc/invoke.texi: Document -print-multiarch.
        * doc/install.texi: Document --enable-multiarch.
        * doc/fragments.texi: Document MULTILIB_OSDIRNAMES, MULTIARCH_DIRNAME.
        * configure.ac: Add --enable-multiarch option.
        * configure: Regenerate.
        * Makefile.in (s-mlib): Pass MULTIARCH_DIRNAME to genmultilib.
        enable_multiarch, with_float: New macros.
        if_multiarch: New macro, define in terms of enable_multiarch.
        * genmultilib: Add new argument for the multiarch name.
        * gcc.c (multiarch_dir): Define.
        (for_each_path): Search for multiarch suffixes.
        (driver_handle_option): Handle multiarch option.
        (do_spec_1): Pass -imultiarch if defined.
        (main): Print multiarch.
        (set_multilib_dir): Separate multilib and multiarch names
        from multilib_select.
        (print_multilib_info): Ignore multiarch names in multilib_select.
        * incpath.c (add_standard_paths): Search the multiarch include dirs.
        * cppdefault.h (default_include): Document multiarch in multilib
        member.
        * cppdefault.c: [LOCAL_INCLUDE_DIR, STANDARD_INCLUDE_DIR] Add an
        include directory for multiarch directories.
        * common.opt: New options --print-multiarch and -imultilib.
        * config.gcc <i[34567]86-*-linux* | x86_64-*-linux*> (tmake_file):
        Include i386/t-linux.
        <i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu> (tmake_file):
        Include i386/t-kfreebsd.
        <i[34567]86-*-gnu*> (tmake_file): Include i386/t-gnu.
        * config/i386/t-linux64: Add multiarch names in
        MULTILIB_OSDIRNAMES, define MULTIARCH_DIRNAME.
        * config/i386/t-gnu: New file.
        * config/i386/t-kfreebsd: Likewise.
        * config/i386/t-linux: Likewise.

2012-11-14  Jan Hubicka  <jh@suse.cz>

        * tree.c (set_call_expr_flags): New function.
        (local_define_builtin): Use it.
        * tree.h (set_call_expr_flags): Declare.

2012-11-14  Uros Bizjak  <ubizjak@gmail.com>
            Vladimir Yakovlev  <vladimir.b.yakovlev@intel.com>

        PR target/47440
        * config/i386/i386.c (gate_insert_vzeroupper): New function.
        (rest_of_handle_insert_vzeroupper): Ditto.
        (struct rtl_opt_pass pass_insert_vzeroupper): New.
        (ix86_option_override): Register vzeroupper insertion pass here.
        (ix86_check_avx256_register): Handle SUBREGs properly.
        (ix86_init_machine_status): Remove optimize_mode_switching[AVX_U128]
        initialization.

2012-11-14  David Edelsohn  <dje.gcc@gmail.com>

        * configure.ac (HAVE_LD_LARGE_TOC): Add AIX test.
        * configure: Regenerated.
        * config/rs6000/aix61.h (SUBTARGET_OVERRIDE_OPTIONS): Warn if
        other toc options used with cmodel. Disable TARGET_NO_FP_IN_TOC
        and TARGET_NO_SUM_IN_TOC if not CMODEL_SMALL. CMODEL_MEDIUM means
        CMODEL_LARGE on AIX.
        (ASM_SPEC): -mvsx implies -mpwr6. Add -many.
        (ASM_DEFAULT_SPEC): Use -mpwr4.
        (TARGET_CMODEL): Define.
        (SET_CMODEL): Define.
        * config/rs6000/rs6000.md (largetoc_high_aix<mode>): New.
        (largetoc_high_plus_aix<mode>): New.
        (largetoc_low<mode>): Change to mode iterator. Test TARGET_TOC
        instead of TARGET_ELF.
        (tocref): Remove TARGET_ELF test.
        * config/rs6000/rs6000.c (output_toc): Use [TE] for large TOC
        symbols on AIX.
        * config/rs6000/aix64.opt (mcmodel): New.

2012-11-14  Andreas Tobler  <andreast@fgznet.ch>

        * config/i386/i386.c (ix86_get_function_versions_dispatcher): Guard
        variables with ASM_OUTPUT_TYPE_DIRECTIVE and
        HAVE_GNU_INDIRECT_FUNCTION where needed.

2012-11-13  Ian Lance Taylor  <iant@google.com>

        * common.opt (fPIC, fPIE, fpic, fpie): Create a Negative loop such
        that any of these options disables the others.

2012-11-13  Sriraman Tallam  <tmsriram@google.com>

        * cgraph.c (insert_new_cgraph_node_version): Use cgraph_get_node
        instead of cgraph_get_create_node.
        * config/i386/i386.c (ix86_get_function_versions_dispatcher): Move
        ifunc not supported code to the end.

2012-11-13  Martin Jambor  <mjambor@suse.cz>

        PR tree-optimization/55253
        * ipa-cp.c (merge_aggregate_lattices): Propagate aggs_contain_variable
        flag.

2012-11-13  Eric Botcazou  <ebotcazou@adacore.com>
            H.J. Lu  <hongjiu.lu@intel.com>

        PR middle-end/55142
        * config/i386/i386.c (legitimize_pic_address): Properly handle
        REG + CONST.
        (ix86_print_operand_address): Set code to 'k' when forcing
        addr32 prefix.  For x32, zero-extend negative displacement if
        it < -16*1024*1024.

2012-11-13  Uros Bizjak  <ubizjak@gmail.com>

        PR target/41993
        * mode-switching.c (create_pre_exit): Set return_copy to last_insn if
        copy_start is not a function return regno. Skip debug instructions
        in instruction scan loop.

2012-11-13  Andrew Stubbs  <ams@codesourcery.com>
            Ulrich Weigand  <ulrich.weigand@linaro.org>

        * config/arm/arm.c (arm_emit_coreregs_64bit_shift): Fix comment.
        * config/arm/arm.md (opt, opt_enabled): New attributes.
        (enabled): Use opt_enabled.
        (ashldi3, ashrdi3, lshrdi3): Add TARGET_NEON case.
        (ashldi3): Allow general operands for TARGET_NEON case.
        * config/arm/iterators.md (rshifts): New code iterator.
        (shift, shifttype): New code attributes.
        * config/arm/neon.md (UNSPEC_LOAD_COUNT): New unspec type.
        (neon_load_count, ashldi3_neon_noclobber, ashldi3_neon,
        signed_shift_di3_neon, unsigned_shift_di3_neon,
        ashrdi3_neon_imm_noclobber, lshrdi3_neon_imm_noclobber,
        <shift>di3_neon): New patterns.

2012-11-13  Jakub Jelinek  <jakub@redhat.com>

        * Makefile.in (asan.o): Depend on $(TM_P_H).

        PR tree-optimization/55281
        * tree-vect-generic.c (expand_vector_condition): Accept any
        is_gimple_val rather than just SSA_NAME if not COMPARISON_CLASS_P.
        * fold-const.c (fold_ternary_loc): Fold VEC_COND_EXPR if arg0 is
        either integer_all_onesp or integer_zerop.
        * tree-vect-stmts.c (vectorizable_condition): Build the condition
        using corresponding vector integer type instead of vectype.

        PR rtl-optimization/54127
        * cfgrtl.c (force_nonfallthru_and_redirect): When redirecting
        asm goto labels from BB_HEAD (e->dest) to target bb, decrement
        LABEL_NUSES of BB_HEAD (e->dest) and increment LABEL_NUSES of
        BB_HEAD (target) appropriately and adjust JUMP_LABEL and/or
        REG_LABEL_TARGET and REG_LABEL_OPERAND.

2012-11-12  Jakub Jelinek  <jakub@redhat.com>

        * asan.c (instrument_builtin_call) <case BUILT_IN_BCOPY>: Fix up
        dest assignment.

2012-11-13  Hans-Peter Nilsson  <hp@axis.com>

        PR target/55257
        * config/cris/cris.c (cris_asm_output_mi_thunk): Call
        final_start_function and final_end_function.

2012-11-12  David Edelsohn  <dje.gcc@gmail.com>

        * asan.c: Include tm_p.h.

2012-11-12  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        PR target/55195
        * config/pa/pa.md (attr type): Add sibcall and sh_func_adrs insn types.
        (in_branch_delay): Don't allow sibcall or sh_func_adrs insns.
        (in_nullified_branch_delay): Likewise.
        (in_call_delay): Likewise.
        Define delay for sibcall insns.  Adjust Z3 and Z4 insn reservations for
        new types.  Add opaque cond to mark all calls, sibcalls, dyncalls and
        the $$sh_func_adrs call as variable.  Update type of sibcalls and
        $$sh_func_adrs call.
        * config/pa/pa.c (pa_adjust_insn_length): Revise to return updated
        length instead of adjustment.  Handle negative and undefined call
        adjustments for insn_default_length.  Remove adjustment for millicode
        insn with unfilled delay slot.
        (pa_output_millicode_call): Update for revised millicode length.
        * config/pa/pa.h (ADJUST_INSN_LENGTH): Revise to set LENGTH.

2012-11-12  Eric Botcazou  <ebotcazou@adacore.com>

        * tree-ssa-ccp.c (dump_lattice_value) <CONSTANT>: Fix duplication.

2012-11-12  Eric Botcazou  <ebotcazou@adacore.com>

        * common.opt (fvar-tracking-uninit): Document.
        * toplev.c (process_options): Fix handling of flag_var_tracking_uninit.
        * config/darwin.c (darwin_override_options): Likewise.

2012-11-12  Steven Bosscher  <steven@gcc.gnu.org>

        * sched-vis.c (print_pattern): Handle NULL patterns.

2012-11-12  Steven Bosscher  <steven@gcc.gnu.org>
            Jakub Jelinek  <jakub@redhat.com>

        PR rtl-optimization/51447
        * df-scan.c (df_get_entry_block_def_set): Add global regs to the set.
        * df-problems.c (df_lr_local_compute): Make global regs always live.
        * dce.c (deletable_insn_p): Make insns setting a global reg
        inherently necessary.

2012-11-12  Ian Bolton  <ian.bolton@arm.com>

        * config/aarch64/aarch64.md (cmov<mode>_insn): Emit CSINC when
        one of the alternatives is constant 1.
        * config/aarch64/constraints.md: New constraint.
        * config/aarch64/predicates.md: Rename predicate
        aarch64_reg_zero_or_m1 to aarch64_reg_zero_or_m1_or_1.

2012-11-12  Ian Bolton  <ian.bolton@arm.com>

        * config/aarch64/aarch64.md (*compare_neg<mode>): New pattern.

2012-11-12  Tobias Burnus  <burnus@net-b.de>

        * doc/invoke.texi: Move -faddress-sanitizer from Optimization
        Options to Debugging Options.

2012-11-12  Jakub Jelinek  <jakub@redhat.com>

        * asan.c: Formatting cleanups.

2012-11-12  Wei Mi  <wmi@google.com>

        * gcc.c (LINK_COMMAND_SPEC): Add -lasan to link command if
        -faddress-sanitizer is on.

2012-11-12  Dodji Seketeli  <dodji@redhat.com>

        * gimple.h (is_gimple_builtin_call): Declare ...
        * gimple.c (is_gimple_builtin_call): ... new public function.
        * asan.c (insert_if_then_before_iter, instrument_mem_region_access,
        instrument_strlen_call, maybe_instrument_builtin_call,
        instrument_call): New static functions.
        (create_cond_insert_point): Renamed
        create_cond_insert_point_before_iter into this.  Add a new
        parameter to decide whether to insert the condition before or
        after the statement iterator.
        (build_check_stmt): Adjust for the new create_cond_insert_point.
        Add a new parameter to decide whether to add the instrumentation
        code before or after the statement iterator.
        (instrument_assignment): Factorize from ...
        (transform_statements): ... here.  Use maybe_instrument_call to
        instrument builtin function calls as well.
        (instrument_derefs): Adjust for the new parameter of
        build_check_stmt.  Fix detection of bit-field access.

2012-11-12  Dodji Seketeli  <dodji@redhat.com>

        * asan.c (create_cond_insert_point_before_iter): Factorize out of ...
        (build_check_stmt): ... here.

2012-11-12  Dodji Seketeli  <dodji@redhat.com>

        * asan.c (create_cond_insert_point_before_iter): Factorize out of ...
        (build_check_stmt): ... here.

2012-11-12  Dodji Seketeli  <dodji@redhat.com>

        * asan.c (build_check_stmt): Accept the memory access to be
        represented by an SSA_NAME.

2012-11-12  Jakub Jelinek  <jakub@redhat.com>
            Wei Mi  <wmi@google.com>

        * varasm.c: Include asan.h.
        (assemble_noswitch_variable): Grow size by asan_red_zone_size
        if decl is asan protected.
        (place_block_symbol): Likewise.
        (assemble_variable): If decl is asan protected, increase
        DECL_ALIGN if needed, and for decls emitted using
        assemble_variable_contents append padding zeros after it.
        * Makefile.in (varasm.o): Depend on asan.h.
        * asan.c: Include output.h.
        (asan_pp, asan_pp_initialized, asan_ctor_statements): New variables.
        (asan_pp_initialize, asan_pp_string): New functions.
        (asan_emit_stack_protection): Use asan_pp{,_initialized}
        instead of local pp{,_initialized} vars, use asan_pp_initialize
        and asan_pp_string helpers.
        (asan_needs_local_alias, asan_protect_global,
        asan_global_struct, asan_add_global): New functions.
        (asan_finish_file): Protect global vars that can be protected. Use
        asan_ctor_statements instead of ctor_statements
        * asan.h (asan_protect_global): New prototype.
        (asan_red_zone_size): New inline function.

2012-11-12  Jakub Jelinek  <jakub@redhat.com>

        * Makefile.in (asan.o): Depend on $(EXPR_H) $(OPTABS_H).
        (cfgexpand.o): Depend on asan.h.
        * asan.c: Include expr.h and optabs.h.
        (asan_shadow_set): New variable.
        (asan_shadow_cst, asan_emit_stack_protection): New functions.
        (asan_init_shadow_ptr_types): Initialize also asan_shadow_set.
        * cfgexpand.c: Include asan.h.  Define HOST_WIDE_INT heap vector.
        (partition_stack_vars): If i is large alignment and j small
        alignment or vice versa, break out of the loop instead of continue,
        and put the test earlier.  If flag_asan, break out of the loop
        if for small alignment size is different.
        (struct stack_vars_data): New type.
        (expand_stack_vars): Add DATA argument.  Change PRED type to
        function taking size_t argument instead of tree.  Adjust pred
        calls.  Fill DATA in and add needed padding in between variables
        if -faddress-sanitizer.
        (defer_stack_allocation): Defer everything for flag_asan.
        (stack_protect_decl_phase_1, stack_protect_decl_phase_2): Take
        size_t index into stack_vars array instead of the decl directly.
        (asan_decl_phase_3): New function.
        (expand_used_vars): Return var destruction sequence.  Adjust
        expand_stack_vars calls, add another one for flag_asan.  Call
        asan_emit_stack_protection if expand_stack_vars added anything
        to the vectors.
        (expand_gimple_basic_block): Add disable_tail_calls argument.
        (gimple_expand_cfg): Pass true to it if expand_used_vars returned
        non-NULL.  Emit the sequence returned by expand_used_vars after
        return_label.
        * asan.h (asan_emit_stack_protection): New prototype.
        (asan_shadow_set): New decl.
        (ASAN_RED_ZONE_SIZE, ASAN_STACK_MAGIC_LEFT, ASAN_STACK_MAGIC_MIDDLE,
        ASAN_STACK_MAGIC_RIGHT, ASAN_STACK_FRAME_MAGIC): Define.
        (asan_protect_stack_decl): New inline.
        * toplev.c (process_options): Also disable -faddress-sanitizer on
        !FRAME_GROWS_DOWNWARDS targets.

2012-11-12  Jakub Jelinek  <jakub@redhat.com>

        * asan.c (build_check_stmt): Rename join_bb variable to else_bb.
        (gate_asan_O0): New function.
        (pass_asan_O0): New variable.
        * passes.c (init_optimization_passes): Add pass_asan_O0.
        * tree-pass.h (pass_asan_O0): New declaration.

2012-11-12  Jakub Jelinek  <jakub@redhat.com>
            Xinliang David Li  <davidxl@google.com>
            Dodji Seketeli  <dodji@redhat.com>

        * Makefile.in (GTFILES): Add $(srcdir)/asan.c.
        (asan.o): Update the dependencies of asan.o.
        * asan.c (tm.h, tree.h, tm_p.h, basic-block.h, flags.h
        function.h, tree-inline.h, tree-dump.h, diagnostic.h, demangle.h,
        langhooks.h, ggc.h, cgraph.h, gimple.h): Remove these unused but
        included headers.
        (shadow_ptr_types): New variable.
        (report_error_func): Change is_store argument to bool, don't append
        newline to function name.
        (PROB_VERY_UNLIKELY, PROB_ALWAYS): Define.
        (build_check_stmt): Change is_store argument to bool.  Emit GIMPLE
        directly instead of creating trees and gimplifying them.  Mark
        the error reporting function as very unlikely.
        (instrument_derefs): Change is_store argument to bool.  Use
        int_size_in_bytes to compute size_in_bytes, simplify size check.
        Use build_fold_addr_expr instead of build_addr.
        (transform_statements): Adjust instrument_derefs caller.
        Use gimple_assign_single_p as stmt test.  Don't look at MEM refs
        in rhs2.
        (asan_init_shadow_ptr_types): New function.
        (asan_instrument): Don't push/pop gimplify context.
        Call asan_init_shadow_ptr_types if not yet initialized.
        * asan.h (ASAN_SHADOW_SHIFT): Adjust comment.

2012-11-12  Jakub Jelinek  <jakub@redhat.com>

        * toplev.c (process_options): Warn and turn off
        -faddress-sanitizer if not supported by target.
        * asan.c: Include target.h.
        (asan_scale, asan_offset_log_32, asan_offset_log_64,
        asan_offset_log): Removed.
        (build_check_stmt): Use ASAN_SHADOW_SHIFT and
        targetm.asan_shadow_offset ().
        (asan_instrument): Don't initialize asan_offset_log.
        * asan.h (ASAN_SHADOW_SHIFT): Define.
        * target.def (TARGET_ASAN_SHADOW_OFFSET): New hook.
        * doc/tm.texi.in (TARGET_ASAN_SHADOW_OFFSET): Add it.
        * doc/tm.texi: Regenerated.
        * Makefile.in (asan.o): Depend on $(TARGET_H).
        * config/i386/i386.c (ix86_asan_shadow_offset): New function.
        (TARGET_ASAN_SHADOW_OFFSET): Define.

2012-11-12  Wei Mi  <wmi@google.com>
            Diego Novillo  <dnovillo@google.com>
            Dodji Seketeli  <dodji@redhat.com>

        * Makefile.in: Add asan.c and its dependencies.
        * common.opt: Add -faddress-sanitizer option.
        * doc/invoke.texi: Document the new flag.
        * passes.c: Add the asan pass.
        * toplev.c (compile_file): Call asan_finish_file.
        * asan.c: New file.
        * asan.h: New file.
        * tree-pass.h: Declare pass_asan.

2012-11-12  Tobias Burnus  <burnus@net-b.de>

        * diagnostic.c (diagnostic_append_note): Also call va_end when
        inhibit_notes_p is true.

2012-11-12  Bin Cheng  <bin.cheng@arm.com>

        * gcse.c (struct bb_data): Add new fields, old_pressure, live_in
        and backup.
        (get_regno_pressure_class): Add prototype.
        (update_bb_reg_pressure): New.
        (should_hoist_expr_to_dom): Add new parameter from.
        Monitor the change of reg pressure and use it to drive hoisting.
        (hoist_code): Update LIVE and reg pressure information.
        (calculate_bb_reg_pressure): Initialize live_in and backup.

2012-11-12  Oleg Endo  <olegendo@gcc.gnu.org>

        * doc/md.texi (Standard Pattern Names For Generation): Fix swapped
        sine and cosine operands in the sincos description.

2012-11-12  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/53512
        * config/sh/sh.md (sincossf3): Fix swapped sin and cos operands.

2012-11-11  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.md (*movti_internal_rex64): Remove "!" from
        riF->o alternative.

2012-11-11  Eric Botcazou  <ebotcazou@adacore.com>

        * config/sparc/sparc.h (AS_NIAGARA3_FLAG): Tweak.
        * config/sparc/sol2.h (TARGET_CPU_niagara4 support): Fix pasto.

2012-11-11  Eric Botcazou  <ebotcazou@adacore.com>
            H.J. Lu  <hongjiu.lu@intel.com>

        PR rtl-optimization/55247
        PR middle-end/55259
        * emit-rtl.c (adjust_address_1): If POINTERS_EXTEND_UNSIGNED > 0,
        handle ZERO_EXTEND.
        * recog.c (offsettable_address_addr_space_p): Likewise.

2012-11-11  Steven Bosscher  <steven@gcc.gnu.org>

        PR middle-end/55263
        * postreload.c (rest_of_handle_postreload): With non-call exceptions,
        if edges are purged call cleanup_cfg to remove unreachable blocks.

2012-11-11  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/extend.texi: Copy-edit to use "built-in function" instead
        of "builtin", per GCC coding standards.  Also use consistent
        capitalization in titles of sections describing built-in functions.

2012-11-11  Martin Jambor  <mjambor@suse.cz>

        PR tree-optimization/55238
        * ipa-cp.c (agg_pass_through_permissible_p): New function.
        (propagate_aggs_accross_jump_function): Use it.
        (find_aggregate_values_for_callers_subset): Likewise and relax an
        assert.

2012-11-10  Uros Bizjak  <ubizjak@gmail.com>

        PR target/47440
        * config/i386/i386.c (check_avx256_stores): Remove.
        (ix86_check_avx256_register): New.
        (ix86_avx_u128_mode_needed): Use ix86_check_avx256_register.
        Check the whole RTX for 256bit registers using for_each_rtx.
        (ix86_check_avx_stores): New.
        (ix86_avx_u128_mode_after): Change mode of CALL RTX to AVX_U128_CLEAN
        if there are no 256bit registers used in the function return register.
        (ix86_avx_u128_mode_entry): Use ix86_check_avx256_register.
        (ix86_avx_u128_mode_exit): Ditto.

2012-11-10  Jan Hubicka  <jh@suse.cz>

        PR middle-end/48636
        * ipa-inline.c (want_inline_small_function_p): Take aray index hint.
        (edge_badness): Likewise.
        * ipa-inline.h (inline_hints_vals): Add array_index and comments.
        (inline_summary): Add ARRAY_INDEX.
        * ipa-inline-analysis.c (dump_inline_hints): Dump array_index hint.
        (reset_inline_summary): Handle array_index hint.
        (inline_node_duplication_hook): Likewise.
        (dump_inline_summary): Likewise.
        (array_index_predicate): New function.
        (estimate_function_body_sizes): Use it.
        (estimate_node_size_and_time): Use array_index hint.
        (inline_merge_summary, inline_read_section): Likewise.

2012-11-10  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/extend.texi: Copy-edit to use "bit-field" consistently
        instead of "bitfield" or "bit field".

2012-11-10  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/extend.texi: Copy-edit to fix incorrect hyphenation phrases
        involving "bit", "byte", "word", "precision", and "floating"
        modifiers.

2012-11-10  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/extend.texi: Copy-edit to fix incorrect uses of "which"
        and "that" throughout the file.

2012-11-10  Andrew Pinski  <apinski@cavium.com>

        PR bootstrap/55202
        * configure.ac: Set PLUGIN_LD_SUFFIX to just "ld" if it was "ld-new"
        or "collect-ld".
        * configure: Regenerate.

2012-11-10  Eric Botcazou  <ebotcazou@adacore.com>

        * expr.c (store_field): Remove TYPE parameter.  Remove block of code
        dealing with BLKmode in registers.  Reimplement this support using
        pseudo-registers and bit-field techniques.
        (store_constructor_field): Remove TYPE parameter and adjust calls to
        store_field.
        (expand_assignment): Adjust calls to store_field.  Add comment.
        (store_expr): Add comment.
        (store_constructor): Adjust calls to store_constructor_field.
        (expand_expr_real_2): Adjust call to store_field.

2012-11-10  Vladimir Makarov  <vmakarov@redhat.com>
            Uros Bizjak  <ubizjak@gmail.com>

        PR target/55247
        * config/i386/i386.md (*movti_internal_rex64): Add "!" to riF->o
        alternative.

2012-11-09  Ed Smith-Rowland  <3dw4rd@verizon.net>

        PR c++/54413
        * doc/invoke.texi: Document f[no-]ext-numeric-literals flag.

2012-11-09  Eric Botcazou  <ebotcazou@adacore.com>

        * doc/install.texi (sparc64-x-solaris2): Mention MPC as well.

2012-11-09  Richard Henderson  <rth@redhat.com>

        * config/i386/i386.c (ix86_lra_p): Remove.
        (TARGET_LRA_P): Use hook_bool_void_true.

2012-11-09  Jason Merrill  <jason@redhat.com>

        * attribs.c (lookup_attribute_spec): Handle getting a TREE_LIST.

2012-11-09  Vladimir Makarov  <vmakarov@redhat.com>

        PR tree-optimization/55154
        * lra-int.h (LRA_LOSER_COST_FACTOR, LRA_MAX_REJECT): New macros.
        * lra.c (setup_operand_alternative): Use them.
        * lra-constraints.c (LOSER_COST_FACTOR, MAX_OVERALL_COST_BOUND):
        Remove.
        (process_alt_operands): Use LRA_LOSER_COST_FACTOR and LRA_MAX_REJECT.
        Accumulate reject instead of setting for non-const.
        (curr_insn_transform): Initialize best_losers and best_overall by
        INT_MAX.

2012-11-09  Christian Bruel  <christian.bruel@st.com>

        * config/sh/sh.c (sh_can_use_simple_return_p): Enable with
        -freorder-blocks-and-partition.

2012-11-09  Kenneth Zadeck <zadeck@naturalbridge.com>

        * rtl.h (CONST_SCALAR_INT_P): New macro.
        * cfgexpand.c (expand_debug_locations): Changed to use
        CONST_SCALAR_INT_P macro.
        * combine.c (try_combine, subst, make_extraction,
        gen_lowpart_for_combine): Ditto.
        * cselib.c (entry_and_rtx_equal_p, rtx_equal_for_cselib_1): Ditto.
        * dwarf2out.c (loc_descriptor): Ditto.
        * emit-rtl.c (gen_lowpart_common): Ditto.
        * ira-costs.c (record_reg_classes, record_address_regs): Ditto.
        * ira-lives.c (single_reg_class): Ditto.
        * recog.c (simplify_while_replacing, asm_operand_ok,
        constrain_operands): Ditto.
        * reload.c (find_reloads): Ditto.
        * simplify-rtx.c (simplify_unary_operation_1,
        simplify_const_unary_operation, simplify_binary_operation_1,
        simplify_const_binary_operation, simplify_relational_operation_1,
        simplify_subreg): Ditto.

2012-11-09  Steven Bosscher  <steven@gcc.gnu.org>

        PR middle-end/54385
        * postreload.c (reload_cse_simplify): Return a bool indicating
        whether the CFG was changed.
        (reload_cse_regs_1): Traverse the CFG instead of the insns chain.
        Cleanup the CFG if edges may have been removed.
        (reload_cse_regs): Update.

2012-11-09  Andrey Belevantsev  <abel@ispras.ru>

        PR rtl-optimization/54472
        * sel-sched-ir.c (has_dependence_note_reg_set): Handle implicit sets.
        (has_dependence_note_reg_clobber, has_dependence_note_reg_use):
        Likewise.

2012-11-09  Eric Botcazou  <ebotcazou@adacore.com>

        * config/i386/i386.c (release_scratch_register_on_entry): Also adjust
        sp_offset manually.

2012-11-08  Christian Bruel  <christian.bruel@st.com>

        * tree-ssa-tail-merge.c (replace_block_by): Update bb2 profile count.
        Do not reset dead bb1->frequency.

2012-11-08  Steven Bosscher  <steven@gcc.gnu.org>

        PR tree-optimization/55191
        * cfganal.c (connect_infinite_loops_to_exit): Call dfs_deadend here.
        (flow_dfs_compute_reverse_execute): Don't call it here.

2012-11-08  Jakub Jelinek  <jakub@redhat.com>

        PR debug/53145
        * dwarf2out.c (gen_compile_unit_die): Don't call gen_producer_string
        here, instead add "" if producer_string is NULL.
        (dwarf2out_finish): Call gen_producer_string here, unconditionally
        decrease refcount of the old indirect string and set val_str to
        find_AT_string result.

        PR debug/54499
        * cgraphunit.c (assemble_thunk): Don't call source_line debug hook
        here, instead call insn_locations_{init,finalize} and initialize
        prologue_location.

2012-11-08  Dmitry Gorbachev  <d.g.gorbachev@gmail.com>

        PR driver/54789
        * gcc.c (process_command): Use save_switch for synthesized
        -fcompare-debug=* option; mark the switch as known.

2012-11-08  Jakub Jelinek  <jakub@redhat.com>

        PR target/54308
        * config/rs6000/rs6000.c (legitimate_indirect_address_p): Remove
        inline keyword.

2012-11-08  Bernd Schmidt  <bernds@codesourcery.com>

        PR rtl-optimization/54850
        * sched-deps.c (find_inc): Add all dependencies from the inc_insn
        to the mem_insn.

2012-11-08  Jan Hubicka  <jh@suse.cz>

        PR middle-end/48636
        * ipa-inline.c (big_speedup_p): New function.
        (want_inline_small_function_p): Use it.
        (edge_badness): Dump it.
        * params.def (inline-min-speedup): New parameter.
        * doc/invoke.texi (inline-min-speedup): Document.

2012-11-08  Martin Jambor  <mjambor@suse.cz>

        * ipa-prop.c (determine_known_aggregate_parts): Skip writes to
        different declarations when tracking writes to a declaration.

2012-11-07  David S. Miller  <davem@davemloft.net>

        * config/sparc/constraints.md ("U"): Document, in detail,
        which this constraint is necessary.

2012-11-07  Uros Bizjak  <ubizjak@gmail.com>

        PR middle-end/55235
        * expr.c (store_expr): Do not call emit_block_move for
        non-BLKmode values.

2012-11-07  Eric Botcazou  <ebotcazou@adacore.com>

        PR middle-end/55219
        * fold-const.c (fold_binary_op_with_conditional_arg): Do not fold if
        the argument is itself a conditional expression.

2012-11-07  Vladimir Makarov  <vmakarov@redhat.com>

        PR rtl-optimization/55122
        * lra-constraints.c (match_reload): Sync values for dead input pseudos.

2012-11-07  Richard Henderson  <rth@redhat.com>

        * trans-mem.c (pass_ipa_tm): Don't use TODO_update_ssa.

2012-11-07  Peter Bergner  <bergner@vnet.ibm.com>

        * doc/invoke.texi (-mcpu=power8): Document.
        * config.in (HAVE_AS_POWER8): New.
        * config.gcc: Add cpu_type power8.
        * configure.ac: (HAVE_AS_POWER8): Check for assembler support for
        the POWER8 instructions.
        * configure: Regenerate.
        * config/rs6000/rs6000.h: (ASM_CPU_POWER8_SPEC): Define.
        (ASM_CPU_SPEC): Pass %(asm_cpu_power8) for -mcpu=power8.
        (EXTRA_SPECS): Add asm_cpu_power8 spec string.
        * config/rs6000/rs6000-cpus.def (processor_target_table): Alias
        POWER8 to POWER7.
        * config/rs6000/rs6000-tables.opt: Regenerate.
        * config/rs6000/driver-rs6000.c (ASM_CPU_SPEC): For -mcpu=power8,
        pass %(asm_cpu_power8)/-mpwr8.
        * config/rs6000/aix53.h: Likewise.
        * config/rs6000/aix61.h: Likewise.

2012-11-07  Uros Bizjak  <ubizjak@gmail.com>

        PR target/55224
        * config/i386/i386.c (ix86_function_ok_for_sibcall): Put back exception
        to make a sibcall if one of the functions has void return type.

2012-11-07  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR c/53063
        * doc/invoke.texi (Wformat): Update.

2012-11-07  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        * optc-gen.awk: Factor code out to...
        * opt-functions.awk (lang_enabled_by): ... this new function.

2012-11-07  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR c/53063
        * common.opt (Wswitch,Wswitch-default,Wswitch-enum): Move to c.opt.

2012-11-07  Yufeng Zhang  <yufeng.zhang@arm.com>

        * config/aarch64/aarch64.c (aarch64_expand_prologue): Add the missing
        argument 'Pmode' to the 'plus_constant' call.

2012-11-07  Martin Jambor  <mjambor@suse.cz>

        PR tree-optimization/53787
        * ipa-cp.c (ipcp_value_source): New field offset.
        (ipcp_agg_lattice): New type.
        (ipcp_param_lattices): Likewise, move virt_call from ipcp_lattice here.
        (ipcp_agg_lattice_pool): New variable.
        (ipa_get_parm_lattices): New function.
        (ipa_get_lattice): Turned into ipa_get_scalar_lat, use the above.
        Adjusted all callers.
        (print_lattice): New function.
        (print_all_lattices): Use the above, also print aggregate lattices.
        (set_agg_lats_to_bottom): New function.
        (set_agg_lats_contain_variable): Likewise.
        (set_all_contains_variable): Likewise.
        (initialize_node_lattices): Also handle aggregate lattices, set
        virt_call in ipcp_param_lattices.
        (add_value_source): Handle offsets.
        (add_value_to_lattice): Likewise.
        (add_scalar_value_to_lattice): New function.
        (propagate_vals_accross_pass_through): Use add_scalar_value_to_lattice.
        (propagate_vals_accross_ancestor): Likewise.
        (propagate_accross_jump_function): Renamed to
        propagate_scalar_accross_jump_function, use
        add_scalar_value_to_lattice.
        (set_check_aggs_by_ref): New function.
        (merge_agg_lats_step): Likewise.
        (set_chain_of_aglats_contains_variable): Likewise.
        (merge_aggregate_lattices): Likewise.
        (propagate_constants_accross_call): Also handle aggregate lattices.
        (hint_time_bonus): New function.
        (context_independent_aggregate_values): Likewise.
        (gather_context_independent_values): Also handle agggregate values.
        (agg_jmp_p_vec_for_t_vec): New function.
        (estimate_local_effects): Also handle agggregate values.
        (add_all_node_vals_to_toposort): Likewise.
        (ipcp_propagate_stage): Use struct ipcp_param_lattices.
        (get_clone_agg_value): New function.
        (cgraph_edge_brings_value_p): Also handle agggregate values.
        (create_specialized_node): Likewise.
        (find_more_values_for_callers_subset): Rename to
        find_more_scalar_values_for_callers_subset.  Modify dump.
        (copy_plats_to_inter): New function.
        (intersect_with_plats): Likewise.
        (agg_replacements_to_vector): Likewise.
        (intersect_with_agg_replacements): Likewise.
        (find_aggregate_values_for_callers_subset): Likewise.
        (known_aggs_to_agg_replacement_list): Likewise.
        (cgraph_edge_brings_all_scalars_for_node): Likewise.
        (cgraph_edge_brings_all_agg_vals_for_node): Likewise.
        (perhaps_add_new_callers): Old functionality moved to
        cgraph_edge_brings_all_scalars_for_node, call it and
        cgraph_edge_brings_all_agg_vals_for_node.
        (ipcp_val_in_agg_replacements_p): New function.
        (decide_about_value): New function.
        (decide_whether_version_node): A lot of functionality moved to
        decide_about_value.  Also handle agggregate values.
        (ipcp_driver): Also allocate ipcp_agg_lattice_pool.
        (pass_ipa_cp): Fill in new entries.
        * ipa-prop.c (ipa_node_agg_replacements): New variable.
        (free_parms_ainfo): New function.
        (ipa_analyze_node): Use free_parms_ainfo to free stuff.
        (ipa_find_agg_cst_for_param): Do not rely on offset ordering.
        (ipa_set_node_agg_value_chain): New function.
        (ipa_node_removal_hook): Also handle ipa_node_agg_replacements.
        (ipa_node_duplication_hook): Likewise.
        (ipa_free_all_structures_after_ipa_cp): Also free ipcp_agg_lattice_pool.
        (ipa_free_all_structures_after_iinln): Likewise.
        (ipa_dump_agg_replacement_values): New function.
        (write_agg_replacement_chain): Likewise.
        (read_agg_replacement_chain): Likewise.
        (ipa_prop_write_all_agg_replacement): Likewise.
        (read_replacements_section): Likewise.
        (ipa_prop_read_all_agg_replacement): Likewise.
        (adjust_agg_replacement_values): Likewise.
        (ipcp_transform_function): Likewise.
        * ipa-prop.h: Also define heap vector of ipa_agg_jf_item_t and of
        ipa_agg_jump_function_t.
        (ipa_node_params): Make lattices an array of ipcp_param_lattices.
        (ipa_agg_replacement_value): New type and its vector.
        (ipa_set_node_agg_value_chain) Declare.
        (ipa_node_agg_replacements): Likewise.
        (ipa_get_agg_replacements_for_node): New function.
        (ipcp_agg_lattice_pool): Declare.
        (ipa_dump_agg_replacement_values): Likewise.
        (ipa_prop_write_all_agg_replacement): Likewise.
        (ipa_prop_read_all_agg_replacement): Likewise.
        (ipcp_transform_function): Likewise.
        * ipa-inline-analysis.c (estimate_ipcp_clone_size_and_time): Pass around
        known aggregates and hints.
        * ipa-inline.h: include ipa-prop.h.
        (estimate_ipcp_clone_size_and_time): Adjust declaration.
        * lto-streamer.h (lto_section_type): New item
        LTO_section_ipcp_transform.
        * lto-section-in.c (lto_section_name): New element ipcp_trans.
        * params.def (PARAM_IPA_CP_LOOP_HINT_BONUS): New parameter.
        * Makefile.in (IPA_INLINE_H): New.  Use everywhee instead of
        ipa-inline.h.

2012-11-07  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (enum upper_128bits_state): Remove.
        (check_avx256_store): Use bool pointer argument.
        (ix86_avx_u128_mode_needed): Use note_stores also for CALL insns.
        * config/i386/predicates.md (vzeroupper_operation): Use match_test.

2012-11-07  Yufeng Zhang  <yufeng.zhang@arm.com>

        * config/aarch64/aarch64.c (aarch64_expand_prologue): For the
        load-pair with writeback instruction, replace
        aarch64_set_frame_expr with add_reg_note (REG_CFA_ADJUST_CFA);
        add new local variable 'cfa_reg' and use it.

2012-11-07  Kaz Kojima  <kkojima@gcc.gnu.org>

        PR middle-end/49220
        * mode-switching.c (create_pre_exit): Set short_block if there
        are no copy insns.

2012-11-07  Martin Jambor  <mjambor@suse.cz>

        * lto-cgraph.c: Include tree-pass.h.
        (lto_output_node): Stream node->ipa_transforms_to_apply.
        (input_node): Likewise.
        * tree-pass.h (passes_by_id): Declare.
        (passes_by_id_size): Likewise.
        * Makefile.in (lto-cgraph.o): Add TREE_PASS_H to dependencies.

2012-11-07  Jan Hubicka  <jh@suse.cz>

        * ipa-inline-analysis.c (true_predicate, single_cond_predicate,
        reset_inline_edge_summary): Fix formatting.
        (account_size_time): Bump up the limit on number of size/time
        entries to 256.
        (estimate_function_body_sizes): Work in reverse postorder.

2012-11-07  David S. Miller  <davem@davemloft.net>

        PR bootstrap/55211
        Revert:
        * config/sparc/constraints.md ("U"): Delete.
        * config/sparc/sparc.md: Use 'r' constraint instead of 'U'.
        * config/sparc/sync.md: Likewise.
        And revert parts of:
        * doc/md.texi: Sync sparc constraint documentation with reality.

2012-11-07  Jakub Jelinek  <jakub@redhat.com>

        * config/i386/i386.c (ix86_avx_u128_mode_after): Don't
        look for reg in CALL operand.

        PR debug/54693
        * tree-flow.h (propagate_threaded_block_debug_into): New prototype.
        * tree-ssa-threadedge.c (propagate_threaded_block_debug_into): No
        longer static.
        * tree-ssa-loop-ch.c (copy_loop_headers): Use it.

2012-11-06  Sterling Augustine <saugustine@google.com>

        * dwarf2out.c (output_comdat_type_unit): Check for OBJECT_FORMAT_ELF.

2012-11-06  Aldy Hernandez  <aldyh@redhat.com>
            Richard Henderson  <rth@redhat.com>

        * cfg-flags.def (TM_UNINSTRUMENTED, TM_ABORT): New.
        * trans-mem.c (PROB_VERY_LIKELY, PROB_UNLIKELY, PROB_LIKELY): New.
        (struct tm_region): Add tm_state, restart_block,
        original_transaction_was_outer.
        (tm_region_init_0): Initialize them.
        (collect_bb2reg, get_bb_regions_instrumented): New.
        (tm_log_emit_save_or_restores): Merge into ...
        (expand_transaction): ... here.
        (generate_tm_state, propagate_tm_flags_out): New.
        (execute_tm_mark): Avoid processing blocks more than once.
        (split_bb_make_tm_edge): Split out from ...
        (make_tm_edge): ... here.  And merge the rest into ...
        (expand_block_edges): ... here.
        (execute_tm_edges): Avoid processing blocks more than once.
        (ipa_uninstrument_transaction): New.
        (ipa_tm_scan_calls_transaction): Use it.  Rebuild cgraph and ssa.
        (ipa_tm_execute): Init and free original_copy_tables.
        * trans-mem.h (PR_MULTIWAYCODE): New.
        * tree-cfg.c (make_edges): Use EDGE_TM_ABORT.

2012-11-06  Aldy Hernandez  <aldyh@redhat.com>

        * cfghooks.c (copy_bbs): Handle a null loop_father.

        * cgraph.c (cgraph_debug_gimple_stmt): Handle a null
        current_function_decl.

2012-11-06  Richard Henderson  <rth@redhat.com>

        * tree-ssa-tail-merge.c (find_duplicate): Do not consider
        is_tm_ending_fndecl calls as mergable.

2012-11-06  Sterling Augustine <saugustine@google.com>
            Cary Coutant <ccoutant@google.com>

        * common.opt (gno-split-dwarf, gsplit-dwarf): New switches.
        * doc/invoke.texi (Debugging Options): Document them.
        * gcc.c (replace_extension_spec_func):  New function.
        (ASM_FINAL_SPEC): Adjust.
        (static_spec_functions): Add new field for replace-extension.
        (check_live_switch): Adjust comment.  Add case for 'g'.
        * opts.c (finish_options): Set x_debug_generate_pub_sections based on
        x_dwarf_split_debug_info.
        (common_handle_option): Add case for OPT_gsplit_dwarf.
        * dwarf2out.h (addr_table_entry_struct): Add forward declaration.
        (dw_val_struct): Add val_entry pointer.
        * dwarf2out.c (debug_skeleton_info_section,
        debug_skeleton_abbrev_section, debug_addr_section,
        debug_skeleton_line_section, debug_str_offsets_section): New globals.
        (NOT_INDEXED, NO_INDEX_ASSIGNED): New defines.
        (indirect_string_node): New field index.
        (ate_kind): New enum with fields ate_kind_rtc, ate_kind_rtx_dtprel,
        ate_kind_label.
        (addr_table_entry): New structure and type.
        (dw_loc_list_struct): Add field begin_entry.
        (new_loc_desc): Initialize val_entry.
        (size_of_loc_descr, output_loc_operands, output_loc_operands_raw):
        Add cases for DW_OP_GNU_addr_index and DW_OP_const_index.
        (build_cfa_loc): Initialize val_entry.
        (AT_index, add_addr_table_entry, remove_addr_table_entry,
        add_AT_lbl_id): New functions.
        (add_AT_addr, add_AT_range_list): New parameter force_direct.
        (output_die_abbrevs): New function.
        (add_ranges_by_labels): New parameter force_direct.
        (output_line_info): New parameter prologue_only.
        (dtprel_bool): New enum with dtprel_false and dtprel_true.
        (dw_addr_op, new_addr_loc_descr): New functions.
        (DEBUG_DWO_INFO_SECTION, DEBUG_DWO_ABBREV_SECTION,
        DEBUG_ADDR_SECTION, DEBUG_NORM_MACINFO_SECTION,
        DEBUG_DWO_MACINFO_SECTION, DEBUG_MACINFO_SECTION,
        DEBUG_NORM_MACRO_SECTION, DEBUG_DWO_MACRO_SECTION,
        DEBUG_MACRO_SECTION, DEBUG_DWO_LINE_SECTION,
        DEBUG_DWO_LOC_SECTION, DEBUG_NORM_STR_OFFSETS_SECTION,
        DEBUG_DWO_STR_OFFSETS_SECTION, DEBUG_STR_OFFSETS_SECTION,
        DEBUG_DWO_STR_SECTION, DEBUG_NORM_STR_SECTION, DEBUG_STR_SECTION,
        DEBUG_MACRO_SECTION_FLAGS, DEBUG_SKELETON_LINE_SECTION_LABEL,
        DEBUG_SKELETON_INFO_SECTION_LABEL, DEBUG_ADDR_SECTION_LABEL
        DEBUG_SKELETON_ABBREV_SECTION_LABEL): New macros.
        (DEBUG_STR_SECTION_FLAGS): Adjust.
        (TEXT_SECTION_LABEL, COLD_TEXT_SECTION_LABEL,
        DEBUG_LINE_SECTION_LABEL, DEBUG_INFO_SECTION_LABEL,
        DEBUG_ABBREV_SECTION_LABEL, DEBUG_ADDR_SECTION_LABEL,
        DEBUG_LOC_SECTION_LABEL, DEBUG_RANGES_SECTION_LABEL,
        DEBUG_MACINFO_SECTION_LABEL, DEBUG_MACRO_SECTION_LABEL): Adjust
        indentation.
        (debug_skeleton_abbrev_section_label, debug_addr_section_label,
        debug_skeleton_line_section_label, debug_skeleton_info_section_label):
        New global variables.
        (add_AT_flag, add_AT_int, add_AT_unsigned, add_AT_double, add_AT_vec,
        add_AT_data8): Initialize val_entry.
        (add_AT_low_high_pc): New parameter force_direct. Handle
        dwarf_split_debug_info.
        (set_indirect_string, find_AT_string_form): New functions.
        (AT_string_form): Adjust to call find_AT_string_from.
        (add_AT_die_ref, add_AT_fde_ref, add_AT_loc, add_AT_list):
        Initialize val_entry.
        (addr_index_table): New global variable.
        (addr_table_entry_do_hash, addr_table_entry_eq, add_addr_table_entry,
        init_addr_table_entry, remove_addr_table_entry, index_addr_table_entry,
        remove_loc_list_addr_table_entries): New functions.
        (add_AT_addr, add_AT_lbl_id, add_AT_range_list): New parameter
        force_direct.  Handle dwarf_split_debug_info.
        (add_AT_file, add_AT_vms_delta, add_AT_lineptr, add_AT_macptr,
        add_AT_offset): Initialize val_entry.
        (UNRELOCATED_OFFSET, RELOCATED_OFFSET): New defines.
        (size_of_die): Handle dwarf_split_debug_info.
        (size_of_aranges, value_format): Call AT_class.  Check AT_index.
        (output_die_abbrevs): New function.
        (output_abbrev_section): Call output_die_abbrevs.
        (new_loc_list): Initialize begin_entry.
        (output_loc_list): Handle dwarf_split_debug_info.
        (output_range_list_offset, output_loc_list_offset,
        output_attr_index_or_value, ): New functions.
        (output_die): Fix call to dw2_asm_output_data.  Call
        output_attr_index_or_value and output_range_list_offset.
        Adjust logic around dw_val_class_str.
        (add_top_lebel_skeleton_die_attrs, get_skeleton_type_unit,
        output_skeleton_debug_sections): New functions.
        (output_comdat_type_unit, output_pubname, output_aranges): Handle
        dwarf_split_debug_info.
        (add_ranges_by_labels): New parameter force_direct.
        (mem_loc_descriptor, loc_descr): Call new_addr_loc_descr.
        (loc_list_from_tree, add_const_value_attribtue): Use dtprel_bools in
        place of generic integer.
        (dwarf2out_vms_debug_main_pointer, gen_entry_point_die, gen_label_die,
        gen_call_site_die, gen_subprogram_die, gen_variable_die,
        add_high_low_attributes): Adjust calls to add_AT_lbl_id.
        (output_macinfo_op): Adjust indirect_string_logic.
        (save_macinfo_strings): New function.
        (output_macinfo): Adjust.
        (dwarf2out_init): Handle dwarf_split_debug_info.
        (index_string, output_index_string_offset, output_index_string): New
        functions.
        (output_indirect_string): Adjust.
        (output_indirect_strings, output_addr_table_entry, output_addr_table):
        New functions.
        (resolve_addr_in_expr, hash_loc_operands): Handle DW_OP_GNU_addr_index
        and DW_OP_GNU_const_index.  Handle dwarf_split_debug_info.  Call
        remove_loc_list_addr_table_entries and remove_addr_table_entry.
        (index_location_lists): New function.
        (dwarf2out_finish): Handle dwarf_split_debug_info.  New variable
        main_comp_unit_die.  Adjust calls to add_AT_low_high_pc,
        add_ranges_by_labels, add_AT_addr, and add_AT_lineptr. Call
        save_macinfo_strings and output_indirect_strings.

2012-11-06  Gerald Pfeifer  <gerald@pfeifer.com>

        * config/i386/i386.c (make_dispatcher_decl): Guard with
        ASM_OUTPUT_TYPE_DIRECTIVE and HAVE_GNU_INDIRECT_FUNCTION.

2012-11-06  Jan Hubicka  <jh@suse.cz>

        * ipa-inline-analysis.c (estimate_function_body_sizes,
        inline_update_overall_summary): Cap time calculations.

2012-11-06  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (ix86_init_machine_status): Do not
        explicitly clear tls_descriptor_call_expanded_p again.

2012-11-06  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/sse.md
        (<avx_avx2>_maskstore<ssemodesuffix><avxsizesuffix>): Mark operand 0
        as read and written by the instruction.

2012-11-06  Alexandre Oliva <aoliva@redhat.com>

        PR debug/54693
        * tree-ssa-threadedge.c (propagate_threaded_block_debug_into):
        Use a stack vector before allocating a pointer set.

2012-11-06  Martin Jambor  <mjambor@suse.cz>

        * ipa-prop.c (ipa_get_param_decl_index_1): New function.
        (ipa_get_param_decl_index): Just call ipa_get_param_decl_index_1.
        (ipa_populate_param_decls): Accept descriptors parameter rather
        than the whole info.
        (load_from_unmodified_param): Likewise.
        (ipa_load_from_parm_agg_1): Likewise.
        (ipa_load_from_parm_agg): Extract descriptors from info.
        (compute_complex_assign_jump_func): Likewise.
        (ipa_analyze_indirect_call_uses): Likewise.

2012-11-06  Jan Hubicka  <jh@suse.cz>

        * ipa-inline.c (compute_uninlined_call_time): Return gcov_type.
        (compute_inlined_call_time): Watch overflows.
        (relative_time_benefit): Compute in gcov_type.

2012-11-06  Jan Hubicka  <jh@suse.cz>

        * cfgloopanal.c (get_loop_hot_path): New function.
        * tree-ssa-lop-ivcanon.c (struct loop_size): Add CONSTANT_IV,
        NUM_NON_PURE_CALLS_ON_HOT_PATH, NUM_PURE_CALLS_ON_HOT_PATH,
        NUM_BRANCHES_ON_HOT_PATH.
        (tree_estimate_loop_size): Compute the new values.
        (try_unroll_loop_completely): Disable unrolling of loops with only
        calls or too many branches.
        (tree_unroll_loops_completely): Deal also with outer loops of hot loops.
        * cfgloop.h (get_loop_hot_path): Declare.
        * params.def (PARAM_MAX_PEEL_BRANCHES): New parameters.
        * invoke.texi (max-peel-branches): Document.

2012-11-06  Jan Hubicka  <jh@suse.cz>

        * ipa-pure-const.c (check_stmt): Fix debug info formatting.

2012-11-06  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (TARGET_INSTANTIATE_DECLS): New define.
        (ix86_instantiate_decls): New function.
        (ix86_expand_builtin) <case IX86_BUILTIN_LDMXCSR>: Use SLOT_TEMP
        stack slot instead of SLOT_VIRTUAL.
        <case IX86_BUILTIN_STMXCSR>: Ditto.
        (assign_386_stack_local): Do not assert when virtual slot is valid.
        * config/i386/i386.h (enum ix86_stack_slot): Remove SLOT_VIRTUAL.
        * config/i386/i386.md (truncdfsf2): Do not use SLOT_VIRTUAL stack slot.
        (truncxf<mode>2): Ditto.
        (floatunssi<mode>2): Ditto.
        (isinf<mode>2): Ditto.
        * config/i386/sync.md (atomic_load<mode>): Ditto.
        (atomic_store<mode>): Ditto.

2012-11-06  Jan Hubicka  <jh@suse.cz>

        * tree-vect-loop-manip.c (vect_do_peeling_for_loop_bound,
        vect_do_peeling_for_alignment): Fix loop bound computation.
        * tree-vect-loop.c (vect_transform_loop): Maintain loop bounds.

2012-11-06  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54089
        * config/sh/sh.c (and_xor_ior_costs, addsubcosts): Double the costs for
        ops larger than SImode.
        * config/sh/sh.md (rotcl, *rotcl): New insns and splits.
        (ashldi3_k): Convert to insn_and_split and use new rotcl insn.

2012-11-06  Vladimir Yakovlev  <vladimir.b.yakovlev@intel.com>

        PR target/47440
        * config/i386/i386-protos.h (emit_i387_cw_initialization): Delete.
        (emit_vzero): Add prototype.
        (ix86_mode_entry): Likewise.
        (ix86_mode_exit): Likewise.
        (ix86_emit_mode_set): Likewise.

        * config/i386/i386.c (typedef struct block_info_def): Delete.
        (define BLOCK_INFO): Delete.
        (check_avx256_stores): Add checking for MEM_P.
        (move_or_delete_vzeroupper_2): Delete.
        (move_or_delete_vzeroupper_1): Delete.
        (move_or_delete_vzeroupper): Delete.
        (ix86_maybe_emit_epilogue_vzeroupper): Delete.
        (function_pass_avx256_p): Delete.
        (ix86_function_ok_for_sibcall): Remove sibcall disabling.
        (nit_cumulative_args): Remove initialization of of avx256 fields of
        cfun->machine.
        (ix86_emit_restore_sse_regs_using_mov): Remove vzeroupper generation.
        (ix86_expand_epilogue): Likewise.
        (ix86_avx_u128_mode_needed): New.
        (ix86_i387_mode_needed): Rename from ix86_mode_needed.
        (ix86_mode_needed): New.
        (ix86_avx_u128_mode_after): New.
        (ix86_mode_after): New.
        (ix86_avx_u128_mode_entry): New.
        (ix86_mode_entry): New.
        (ix86_avx_u128_mode_exit): New.
        (ix86_mode_exit): New.
        (ix86_emit_mode_set): New.
        (ix86_expand_call): Delete vzeroupper generation.
        (ix86_split_call_vzeroupper): Delete.
        (ix86_init_machine_status): Initialize optimize_mode_switching.
        (ix86_expand_special_args_builtin): Change.
        (ix86_reorg): Delete a call of move_or_delete_vzeroupper.

        * config/i386/i386.h  (VALID_AVX256_REG_OR_OI_MODE): New.
        (AVX_U128): New.
        (avx_u128_state): New.
        (NUM_MODES_FOR_MODE_SWITCHING): Added AVX_U128_ANY.
        (MODE_AFTER): New.
        (MODE_ENTRY): New.
        (MODE_EXIT): New.
        (EMIT_MODE_SET): Change.
        (machine_function): Delete avx256 fields.

        * config/i386/i386.md (UNSPEC_CALL_NEEDS_VZEROUPPER): Delete.
        (define_insn_and_split "*call_vzeroupper"): Delete.
        (define_insn_and_split "*call_rex64_ms_sysv_vzeroupper"): Delete.
        (define_insn_and_split "*sibcall_vzeroupper"): Delete.
        (define_insn_and_split "*call_pop_vzeroupper"): Delete.
        (define_insn_and_split "*sibcall_pop_vzeroupper"): Delete.
        (define_insn_and_split "*call_value_vzeroupper"): Delete.
        (define_insn_and_split "*sibcall_value_vzeroupper"): Delete.
        (define_insn_and_split "*call_value_rex64_ms_sysv_vzeroupper"): Delete.
        (define_insn_and_split "*call_value_pop_vzeroupper"): Delete.
        (define_insn_and_split "*sibcall_value_pop_vzeroupper"): Delete.
        (define_expand "return"): Remove vzeroupper emitting.
        (define_expand "simple_return"): Delete.

        * config/i386/predicates.md (vzeroupper_operation): New.

        * config/i386/sse.md (avx_vzeroupper): Change.

2012-11-06  Uros Bizjak  <ubizjak@gmail.com>
            Kaz Kojima  <kkojima@gcc.gnu.org>

        PR target/41993
        * mode-switching.c (create_pre_exit): Set return_copy to
        last_insn when copy_start is a pseudo reg.

2012-11-06  Andrey Turetskiy  <andrey.turetskiy@gmail.com>

        * config/i386/i386.c (bdesc_args): Rename CODE_FOR_avx2_umulhrswv16hi3
        to CODE_FOR_avx2_pmulhrswv16hi3.
        * config/i386/predicates.md (const1_operand): Extend for vectors.
        * config/i386/sse.md (ssse3_avx2): Extend.
        (ssedoublemode): Ditto.
        (<sse2_avx2>_uavg<mode>3): Merge avx2_uavgv32qi3, sse2_uavgv16qi3,
        avx2_uavgv16hi3 and sse2_uavgv8hi3 into one.
        (*<sse2_avx2>_uavg<mode>3): Merge *avx2_uavgv32qi3, *sse2_uavgv16qi3,
        *avx2_uavgv16hi3 and *sse2_uavgv8hi3 into one.
        (PMULHRSW): New.
        (<ssse3_avx2>_pmulhrsw<mode>3): Merge avx2_umulhrswv16hi3,
        ssse3_pmulhrswv8hi3 and ssse3_pmulhrswv4hi3 into one.
        (*avx2_pmulhrswv16hi3): Replace const_vector with const1_operand
        predicate.
        (*ssse3_pmulhrswv8hi3): Ditto.
        (*ssse3_pmulhrswv4hi3): Ditto.

2012-11-06  Joern Rennecke  <joern.rennecke@embecosm.com>

        * config/epiphany/epiphany.c (epiphany_address_cost):
        Use MODE parameter.

2012-11-05  Sriraman Tallam  <tmsriram@google.com>

        * doc/tm.texi.in (TARGET_OPTION_FUNCTION_VERSIONS): New hook
        description.
        * (TARGET_COMPARE_VERSION_PRIORITY): New hook description.
        * (TARGET_GET_FUNCTION_VERSIONS_DISPATCHER): New hook description.
        * (TARGET_GENERATE_VERSION_DISPATCHER_BODY): New hook description.
        * doc/tm.texi: Regenerate.
        * target.def (compare_version_priority): New target hook.
        * (generate_version_dispatcher_body): New target hook.
        * (get_function_versions_dispatcher): New target hook.
        * (function_versions): New target hook.
        * cgraph.c (cgraph_fnver_htab): New htab.
        (cgraph_fn_ver_htab_hash): New function.
        (cgraph_fn_ver_htab_eq): New function.
        (version_info_node): New pointer.
        (insert_new_cgraph_node_version): New function.
        (get_cgraph_node_version): New function.
        (delete_function_version): New function.
        (record_function_versions): New function.
        * cgraph.h (cgraph_node): New bitfield dispatcher_function.
        (cgraph_function_version_info): New struct.
        (get_cgraph_node_version): New function.
        (insert_new_cgraph_node_version): New function.
        (record_function_versions): New function.
        (delete_function_version): New function.
        (init_lowered_empty_function): Expose function.
        * tree.h (DECL_FUNCTION_VERSIONED): New macro.
        (tree_function_decl): New bit-field versioned_function.
        * cgraphunit.c (cgraph_analyze_function): Generate body of multiversion
        function dispatcher.
        (cgraph_analyze_functions): Analyze dispatcher function.
        (init_lowered_empty_function): Make non-static. New parameter in_ssa.
        (assemble_thunk): Add parameter to call to init_lowered_empty_function.
        * config/i386/i386.c (add_condition_to_bb): New function.
        (get_builtin_code_for_version): New function.
        (ix86_compare_version_priority): New function.
        (feature_compare): New function.
        (dispatch_function_versions): New function.
        (ix86_function_versions): New function.
        (attr_strcmp): New function.
        (ix86_mangle_function_version_assembler_name): New function.
        (ix86_mangle_decl_assembler_name): New function.
        (make_name): New function.
        (make_dispatcher_decl): New function.
        (is_function_default_version): New function.
        (ix86_get_function_versions_dispatcher): New function.
        (make_attribute): New function.
        (make_resolver_func): New function.
        (ix86_generate_version_dispatcher_body): New function.
        (fold_builtin_cpu): Return integer for cpu builtins.
        (TARGET_MANGLE_DECL_ASSEMBLER_NAME): New macro.
        (TARGET_COMPARE_VERSION_PRIORITY): New macro.
        (TARGET_GENERATE_VERSION_DISPATCHER_BODY): New macro.
        (TARGET_GET_FUNCTION_VERSIONS_DISPATCHER): New macro.
        (TARGET_OPTION_FUNCTION_VERSIONS): New macro.

2012-11-05  Joern Rennecke  <joern.rennecke@embecosm.com>

        * recog.c (extract_insn): Enabled alternative defaults to 1.

2012-11-05  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.c (print_reg): Replace REX_INT_REG_P with
        REX_INT_REGNO_P.

2012-11-05  Eric Botcazou  <ebotcazou@adacore.com>

        PR tree-optimization/54986
        * gimple-fold.c (canonicalize_constructor_val): Strip again all no-op
        conversions on entry but add them back on exit if needed.

2012-11-05  Andreas Schwab  <schwab@linux-m68k.org>

        * final.c (final_scan_insn) [HAVE_cc0]: Handle all comparison
        codes in non-jump and cmove insn.

2012-11-05  Uros Bizjak  <ubizjak@gmail.com>
            Vladimir Yakovlev  <vladimir.b.yakovlev@intel.com>

        * mode-switching.c (create_pre_exit): Force late switching if
        __builtin_{apply,return} emitted a load that require mode,
        other than MODE_EXIT.

2012-11-05  Richard Sandiford  <rdsandiford@googlemail.com>

        PR target/55204
        * config/i386/i386.c (ix86_address_subreg_operand): Remove stack
        pointer check.
        (print_reg): Use true_regnum rather than REGNO.
        (ix86_print_operand_address): Remove SUBREG handling.

2012-11-05  Jan Hubicka  <jh@suse.cz>

        * tree-ssa-loop-niter.c (finite_loop_p): Revamp to be just wrapper of
        max_loop_iterations.

2012-11-05  Joern Rennecke  <joern.rennecke@embecosm.com>

        * reorg.c (fill_simple_delay_slots): Avoid calling optimize_skip
        with a return instruction.

2012-11-05  Vladimir Makarov  <vmakarov@redhat.com>

        PR rtl-optimization/55151
        * lra-constraints.c (process_alt_operands): Permit putting reg
        value into memory.  Increase reject for this case.

2012-11-05  Dehao Chen  <dehao@google.com>

        * final.c (reemit_insn_block_notes): Do not change scope if insn
        location is UNKNOWN_LOCATION.

2012-11-05  Joern Rennecke  <joern.rennecke@embecosm.com>

        * doc/md.texi (Defining Attributes): Document that we are defining
        HAVE_ATTR_name macros as 1 for defined attributes, and as 0
        for undefined special attributes.
        * final.c (asm_insn_count, align_fuzz): Always define.
        (insn_current_reference_address): Likewise.
        (init_insn_lengths): Use if (HAVE_ATTR_length) instead of
        #ifdef HAVE_ATTR_length.
        (get_attr_length_1, shorten_branches, final): Likewise.
        (final_scan_insn, output_asm_name): Likewise.
        * genattr.c (gen_attr): Define HAVE_ATTR_name macros for
        defined attributes as 1.
        Remove ancient get_attr_alternative compatibility code.
        For special purpose attributes not provided, define HAVE_ATTR_name
        as 0.
        In case no length attribute is given, provide stub definitions
        for insn_*_length* functions, and also include insn-addr.h.
        In case no enabled attribute is given, provide stub definition.
        * genattrtab.c (write_length_unit_log): Always write a definition.
        * hooks.c (hook_int_rtx_1, hook_int_rtx_unreachable): New functions.
        * hooks.h (hook_int_rtx_1, hook_int_rtx_unreachable): Declare.
        * lra-int.h (struct lra_insn_recog_data): Make member
        alternative_enabled_p unconditional.
        * lra.c (free_insn_recog_data): Use if (HAVE_ATTR_length) instead of
        #ifdef HAVE_ATTR_length.
        (lra_set_insn_recog_data): Likewise.  Make initialization of
        alternative_enabled_p unconditional.
        (lra_update_insn_recog_data): Use #if instead of #ifdef for
        HAVE_ATTR_enabled.
        * recog.c [!HAVE_ATTR_enabled] (get_attr_enabled): Don't define.
        (extract_insn): Check HAVE_ATTR_enabled.
        (gate_handle_split_before_regstack): Use #if instead of
        #if defined for HAVE_ATTR_length.

2012-11-05  Jan Hubicka  <jh@suse.cz>

        * ipa-inline.c (compute_uninlined_call_time,
        compute_inlined_call_time): New functions.
        (RELATIVE_TIME_BENEFIT_RANGE): New macro.
        (relative_time_benefit): Rewrite.
        (edge_badness): Rewrite path with guessed profile and estimated profile.
        * ipa-inline.h (INLINE_HINT_declared_inline, INLINE_HINT_cross_module):
        New hints.
        (struct inline_summary): Add GROWTH filed.
        * ipa-inline-analysis.c (dump_inline_hints): Update.
        (reset_inline_summary): Update.
        (dump_inline_summary): Update.
        (will_be_nonconstant_predicate): Cleanup to use gimple_store_p and
        gimple_assign_load_p predicates.
        (estimate_node_size_and_time): Drop INLINE_HINT_declared_inline hint.
        (simple_edge_hints): New function.
        (do_estimate_edge_time): Return time of invocation of callee rather
        than the time scaled by edge frequency; update hints code.
        (do_estimate_edge_hints): Update.
        (do_estimate_growth): Cleanup.

2012-11-05  Jakub Jelinek  <jakub@redhat.com>

        PR target/55194
        * dwarf2out.c (value_format) <case dw_val_class_high_pc>: Handle
        also DWARF2_ADDR_SIZE 1 and 2.

2012-11-05  Jan Hubicka  <jh@suse.cz>

        * tree-ssa-loop-niter.c (find_loop_niter): Remove just_once_each_iteration_p.
        (maybe_lower_iteration_bound): Initialize not_executed_last_iteration to  NULL
        * tree-ssa-loop-ivcanon.c (canonicalize_loop_induction_variables): Skip
        just_once_each_iteration_p; record estimated bound when loop has only one
        likely exit; test just_once_each_iteration_p before IV canon itself.

2012-11-05  Jan Hubicka  <jh@suse.cz>

        * ipa-inline.c (leaf_node_p): Rename to ...
        (num_calls) ... this one.
        (want_early_inline_function_p): Allow smal growth on non-leafs.

2012-11-05  Jakub Jelinek  <jakub@redhat.com>

        PR debug/54402
        * var-tracking.c (fp_setter): Return false if there is REG_CFA_RESTORE
        hfp note.
        (vt_initialize): Look for fp_setter in any bb, not just successor of
        entry bb.

2012-11-05  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.h (TARGET_CACHE32, TARGET_HARVARD): Delete macro.
        (TARGET_SUPERSCALAR): Add TARGET_SH2A.
        (CACHE_LOG): Use TARGET_HARD_SH4 and TARGET_SH5 instead of
        TARGET_CACHE32.
        (TRAMPOLINE_ALIGNMENT): Use TARGET_HARD_SH4 and TARGET_SH5 instead of
        TARGET_HARVARD.
        * config/sh/sh.c (sh_trampoline_init): Likewise.

2012-11-05  David Edelsohn  <dje.gcc@gmail.com>

        * system.h (loc_t): Poison.

2012-11-05  Marc Glisse  <marc.glisse@inria.fr>

        * fold-const.c (fold_unary_loc): Disable conversion optimization
        for void type.

2012-11-04  Thomas Schwinge  <thomas@codesourcery.com>

        * configure: Regenerate.

2012-11-04  Eric Botcazou  <ebotcazou@adacore.com>

        * combine.c: Adjust toplevel comment.
        (make_extraction): Adjust head comment and move up canonicalization.

2012-11-04  Alexandre Oliva <aoliva@redhat.com>
            Jakub Jelinek <jakub@redhat.com>

        PR debug/54693
        * tree-ssa-loop-ivopts.c (remove_unused_ivs): Emit debug temps
        for dropped IV sets.

2012-11-04  Alexandre Oliva <aoliva@redhat.com>

        PR debug/54693
        * tree-ssa-threadedge.c (propagate_threaded_block_debug_into):
        New, rewritten from debug stmt copying code...
        (thread_around_empty_block): ... removed from here.
        (thread_across_edge): Call propagate_threaded_block_debug_into.

2012-11-04  Dehao Chen  <dehao@google.com>

        * expr.c (expand_expr_real_1): Change to not using input_location.

2012-11-03  Jan Hubicka  <jh@suse.cz>

        * invoke.texi (profile-use): update documentation.
        * opts.c (common_handle_option): Enable tree-vectorize
        and tree-loop-distribute-patterns.
        * tree-loop-distribution.c (tree_loop_distribution): Skip loops
        optimized for size.
        * config/i386/i386.c (ix86_option_override_internal): Enabe
        prefetch_lop_arrays for profile-use.

2012-11-03  Robert Mason  <rbmj@verizon.net>

        * gcov-io.c (gcov_open): Add file mode to open call (need for VxWorks)

2012-11-03  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/extend.texi: Copy-edit to use present tense except when
        explicitly describing future or past behavior.

2012-11-03  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.c (output_movedouble, output_far_jump,
        output_ieee_ccmpeq): Use multi-line strings for asm.
        (find_regmode_weight): Wrap lines.
        (sh_optimize_target_register_callee_saved): Remove commented out
        variable.
        (emit_load_ptr): Remove prototype.

2012-11-03  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/51244
        * config/sh/sh.md (*cbranch_t): Allow splitting after reload.
        Allow going beyond current basic block before reload when looking for
        the reg set insn.
        * config/sh/sh.c (sh_find_set_of_reg): Don't stop at labels.

2012-11-02  Jan Hubicka  <jh@suse.cz>

        * tree-ssa-loop-niter.c (discover_iteration_bound_by_body_walk): Add
        missing sign to unsigned.

2012-11-02  Andrew Pinski  <apinski@cavium.com>

        PR rtl-opt/54524
        * simplify-rtx.c (simplify_relational_operation_1): Don't simplify
        (LTU/GEU (PLUS a 0) 0) into (GEU/LTU a 0) since they are not
        equivalent.

2012-11-02  Jan Hubicka  <jh@suse.cz>

        * tree-ssa-loop-niter.c (double_int_cmp, bound_index,
        discover_iteration_bound_by_body_walk): New functions.
        (discover_iteration_bound_by_body_walk): Use it.

2012-11-02  Jan Hubicka  <jh@suse.cz>

        * predict.c (predict_loops): Predict also exits not dominating latch.

2012-11-02  Jan Hubicka  <jh@suse.cz>

        * predict.c (predict_loops): Do not predict infinite loops.

2012-11-02  Jan Hubicka  <jh@suse.cz>

        PR middle-end/55079
        * tree-ssa-loop-niter.c (number_of_iterations_exit): Update
        MAX field if NITER was folded to contant.
        (record_estimate): Sanity check.
        * tree-ssa-loop-ivcanon.c (remove_exits_and_undefined_stmts): New
        function.
        (remove_redundant_iv_test): New function.
        (loops_to_unloop, loops_to_unloop_nunroll): New static vars.
        (unloop_loops): Break out from ...
        (try_unroll_loop_completely): ... here; Pass in MAXITER; use
        remove_exits_and_undefined_stmts; do not unloop.
        (canonicalize_loop_induction_variables): Compute MAXITER;
        use remove_redundant_iv_test; remove loop_close_ssa_invalidated
        and irred_invalidated arguments.
        (canonicalize_induction_variables): Compute fresh bound estimates;
        unloop; walk from innermost.
        (tree_unroll_loops_completely): Likewise.

2012-11-02  Vladimir Makarov  <vmakarov@redhat.com>

        PR middle-end/55130
        * lra-constraints.c (debug_loc_equivalence_change_p): Rename to
        loc_equivalence_change_p.
        (lra_constraints): Check equiv_insn_bitmap for debug insn.  Call
        loc_equivalence_change_p for non-transformed insn.

2012-11-02  Eric Botcazou  <ebotcazou@adacore.com>

        * cfg-flags.def (ABNORMAL_CALL): Fix comment.
        (EH): Likewise.
        (SIBCALL): Likewise.
        * cfgrtl.c (rtl_verify_flow_info_1): Adjust error messages.
        Deal with EDGE_SIBCALL and fix the EDGE_ABNORMAL check.

2012-11-02  Jakub Jelinek  <jakub@redhat.com>

        PR target/55147
        * config/i386/i386.md (bswapdi2): Limit to TARGET_64BIT.
        (*bswapdi2_doubleword): Removed.

2012-11-02  Gerald Pfeifer  <gerald@pfeifer.com>

        * doc/install.texi (Specific): Remove moxie web reference.

2012-11-01  Marc Glisse  <marc.glisse@inria.fr>

        PR middle-end/55001
        * tree-vect-generic.c (expand_vector_condition): New function.
        (expand_vector_operations_1): Call it.

2012-11-01  Steve Ellcey  <sellcey@mips.com>

        * target-globals.c (save_target_globals): Save lra_int struct.

2012-11-01  Gerald Pfeifer  <gerald@pfeifer.com>

        * doc/standards.texi (Standards): Adjust reference to Go specification.

2012-11-01  Lawrence Crowl  <crowl@google.com>

        * ebitmap.h: Remove unused.
        * ebitmap.c: Remove unused.
        * Makefile.in: Remove ebitmap.h and ebitmap.c.
        * sbitmap.h (SBITMAP_SIZE_BYTES): Move to source file.
        (SET_BIT_WITH_POPCOUNT): Remove unused.
        (RESET_BIT_WITH_POPCOUNT): Remove unused.
        (bitmap_copy_n): Remove unused.
        (bitmap_range_empty_p): Remove unused.
        (sbitmap_popcount): Remove unused.
        (sbitmap_verify_popcount): Make private to source file.
        * sbitmap.c (SBITMAP_SIZE_BYTES): Move here from header.
        (bitmap_copy_n): Remove unused.
        (bitmap_range_empty_p): Remove unused.
        (sbitmap_popcount): Remove unused.
        (sbitmap_verify_popcount): Make private to source file.

2012-11-01  Lawrence Crowl  <crowl@google.com>

        * sbitmap.h (sbitmap_iter_init): Rename bmp_iter_set_init and add
        unused parameter to match bitmap iterator.  Update callers.
        (sbitmap_iter_cond): Rename bmp_iter_set.  Update callers.
        (sbitmap_iter_next): Rename bmp_iter_next and add unused parameter to
        match bitmap iterator.  Update callers.
        (EXECUTE_IF_SET_IN_SBITMAP_REV): Remove unused.
        (EXECUTE_IF_SET_IN_SBITMAP): Rename EXECUTE_IF_SET_IN_BITMAP and
        adjust to be identical to the definition in bitmap.h.  Conditionalize
        the definition based on not having been defined.  Update callers.
        * bitmap.h (EXECUTE_IF_SET_IN_BITMAP): Conditionalize the definition
        based on not having been defined.  (To match the above.)

2012-11-01  Lawrence Crowl  <crowl@google.com>

        * sbitmap.h (TEST_BIT): Rename bitmap_bit_p, normalizing parameter
        type. Update callers to match.
        (SET_BIT): Rename bitmap_set_bit, normalizing parameter type. Update
        callers to match.
        (SET_BIT_WITH_POPCOUNT): Rename bitmap_set_bit_with_popcount,
        normalizing parameter type. Update callers to match.
        (RESET_BIT): Rename bitmap_clear_bit, normalizing parameter type.
        Update callers to match.
        (RESET_BIT_WITH_POPCOUNT): Rename bitmap_clear_bit_with_popcount,
        normalizing parameter type. Update callers to match.
        * basic-block.h (sbitmap_intersection_of_succs): Rename
        bitmap_intersection_of_succs. Update callers to match.
        * basic-block.h (sbitmap_intersection_of_preds): Rename
        bitmap_intersection_of_preds. Update callers to match.
        * basic-block.h (sbitmap_union_of_succs): Rename
        bitmap_union_of_succs. Update callers to match.
        * basic-block.h (sbitmap_union_of_preds): Rename
        bitmap_union_of_preds. Update callers to match.

2012-11-01  Vladimir Makarov  <vmakarov@redhat.com>

        PR middle-end/55150
        * lra-constraints.c (lra_constraints): Check only pseudos with
        equivalences.  Add insns with equivalence pseudos.

2012-11-01  Sharad Singhai  <singhai@google.com>

        PR other/55164
        * dumpfile.h (struct dump_file_info): Fix order of flags.

2012-11-01  Jan Hubicka  <jh@suse.cz>

        PR middle-end/55104
        * ipa-inline-transform.c (inline_call): Silence an sanity check until
        ipa-cp issue if fixed.

2012-11-01  Sharad Singhai  <singhai@google.com>

        * doc/invoke.texi: Update -fopt-info documentation.
        * dumpfile.c: Move dump_flags here from passes.c.
        Rename opt_info_options to optinfo_verbosity_options.
        Add optgroup_options.
        (dump_files): Add field for optinfo_flags in the static initializer.
        (dump_register): Handle additional parameter for optgroup_flags.
        (opt_info_enable_passes): Renamed opt_info_enable_all. Handle
        optgroup_flags. Fix documentation.
        (opt_info_switch_p_1): Handle optgroup options.
        (opt_info_switch_p): Handle optgroup_flags. Warn on multiple files.
        * dumpfile.h (dump_register): Additional argument for optgroup_flags.
        All callers updated.
        (struct dump_file_info): Add field for optgroup_flags.
        Define OPTGROUP_* flags.
        * tree-pass.h (struct opt_pass): Add addtional field for optinfo_flags.
        All opt_pass static initializers updated.
        * opts-global.c (dump_remap_tree_vectorizer_verbose): Use 'all'
        instead of 'optall'.
        (handle_common_deferred_options): Fix typo in error message.
        * passes.c (register_one_dump_file): Add argument for optgroup_flags.
        Turn on OPTGROUP_IPA for IPA passes.
        Move dump_flags from here to dumpfile.c.
        * statistics.c (statistics_early_init): Use OPTGROUP_NONE in call to
        dump_register.

2012-11-01  Joern Rennecke  <joern.rennecke@embecosm.com>

        PR target/55160
        * config/sh/sh.md (doloop_end): Use emit_jump_insn.

2012-10-31  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/53708
        * tree-vect-data-refs.c (vect_can_force_dr_alignment_p): Preserve
        user-supplied alignment when used with an explicit section name.

2012-10-31  Dehao Chen  <dehao@google.com>

        * tree-eh.c (do_return_redirection): Set location for jump statement.
        (do_goto_redirection): Likewise.
        (frob_into_branch_around): Likewise.
        (lower_try_finally_nofallthru): Likewise.
        (lower_try_finally_copy): Likewise.
        (lower_try_finally_switch): Likewise.
        * expr.c (store_expr): Use current insn location instead of expr
        location.
        (expand_expr_real): Likewise.
        (expand_expr_real_1): Likewise.

2012-10-31   Easwaran Raman  <eraman@google.com>

        PR target/54938
        PR middle-end/54957
        * optabs.c (emit_cmp_and_jump_insn_1): Add REG_BR_PROB note
        only if it doesn't already exist.
        * stmt.c (get_outgoing_edge_probs): Return 0 if BB is NULL.
        (emit_case_dispatch_table): Handle the case where STMT_BB is NULL.
        (expand_sjlj_dispatch_table): Pass BB containing before_case
        to emit_case_dispatch_table.

2012-10-31  Lawrence Crowl  <crowl@google.com>

        * is-a.h: New.
        (is_a <T> (U*)): New.  Test for is-a relationship.
        (as_a <T> (U*)): New.  Treat as a derived type.
        (dyn_cast <T> (U*)): New.  Conditionally cast based on is_a.
        * cgraph.h (varpool_node): Rename to varpool_node_for_decl.
        Adjust callers to match.
        (is_a_helper <cgraph_node>::test (symtab_node_def *)): New.
        (is_a_helper <varpool_node>::test (symtab_node_def *)): New.
        (symtab_node_def::try_function): New.  Change most calls to
        symtab_function_p with calls to dyn_cast <cgraph_node> (p).
        (symtab_node_def::try_variable): New.  Change most calls to
        symtab_variable_p with calls to dyn_cast <varpool_node> (p).
        (symtab_function_p): Remove.  Change callers to use
        is_a <cgraph_node> (p) instead.
        (symtab_variable_p): Remove.  Change callers to use
        is_a <varpool_node> (p) instead.
        * cgraph.c (cgraph_node_for_asm): Remove redundant call to
        symtab_node_for_asm.
        * cgraphunit.c (symbol_finalized_and_needed): New.
        (symbol_finalized): New.
        (cgraph_analyze_functions): Split complicated conditionals out into
        above new functions.
        * Makefile.in (CGRAPH_H): Add is-a.h as used by cgraph.h.

2012-10-31  Steven Bosscher  <steven@gcc.gnu.org>
            Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/55018
        * basic-block.h (dfs_find_deadend): New prototype.
        * cfganal.c (dfs_find_deadend): No longer static.  Use bitmap
        instead of sbitmap for visited.
        (flow_dfs_compute_reverse_execute): Use dfs_find_deadend here, too.
        * dominance.c (calc_dfs_tree): If saw_unconnected, traverse from
        dfs_find_deadend of unconnected b instead of b directly.

2012-10-31  Eric Botcazou  <ebotcazou@adacore.com>

        * config/i386/i386.c (ix86_expand_prologue): Emit frame info for the
        special register pushes before frame probing and allocation.

2012-10-31  Vladimir Makarov  <vmakarov@redhat.com>

        PR middle-end/55150
        * lra-constraints.c (lra_constraints): Update debug insn info
        after equivalence change.

2012-10-31  Jan Hubicka  <jh@suse.cz>

        * ipa-inline.c (ipa_inline): Avoid infinite loop on inlining
        empty virtual functions calling themselves.

2012-10-31  Tom Tromey  <tromey@redhat.com>

        PR other/50899
        * doc/gcc.texi: Add @direntry for gcov.

2012-10-31  Joern Rennecke  <joern.rennecke@embecosm.com>

        * expr.c (can_move_by_pieces): Apply ATTRIBUTE_UNUSED to len.

2012-10-31  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/19105
        PR tree-optimization/21643
        PR tree-optimization/46309
        * tree-ssa-reassoc.c (init_range_entry): Add STMT argument
        and use it if EXP is NULL.
        (update_range_test): Handle OPCODE equal to ERROR_MARK and oe->op NULL.
        (optimize_range_tests): Likewise.
        (final_range_test_p, suitable_cond_bb, no_side_effect_bb, get_ops,
        maybe_optimize_range_tests): New functions.
        (reassociate_bb): Call maybe_optimize_range_tests if last
        stmt of bb is GIMPLE_COND that hasn't been visited yet.

2012-10-31  Richard Sandiford  <rdsandiford@googlemail.com>

        * config/rs6000/rs6000.md (insvsi, insvdi, extvsi, extvdi): Rename
        to...
        (insvsi_internal, insvdi_internal, extvsi_internal)
        (extvdi_internal): ...this.
        (insv, extv): Update accordingly.

2012-10-31  Richard Sandiford  <rdsandiford@googlemail.com>

        * combine.c (simplify_comparison): If BITS_BIG_ENDIAN, always assume
        that zero_extracts of const_ints are doing word-sized extractions.

2012-10-31  Richard Sandiford  <rdsandiford@googlemail.com>

        * combine.c (make_extraction): Remove dead wanted_inner_mode-
        and pos_rtx-related code.

2012-10-31  Richard Sandiford  <rdsandiford@googlemail.com>

        * expmed.c (store_bit_field_1): Move generation of MEM insvs
        to the MEM_P block.
        (extract_bit_field_1): Likewise extvs and extzvs.

2012-10-31  Richard Sandiford  <rdsandiford@googlemail.com>

        * expmed.c (store_bit_field_using_insv): New function,
        split out from...
        (store_bit_field_1): ...here.
        (extract_bit_field_using_extv): New function, split out from...
        (extract_bit_field_1): ...here.

2012-10-31  Richard Sandiford  <rdsandiford@googlemail.com>

        * expmed.c (store_bit_field_1): Use OP_MODE to check whether an
        insv pattern is available.  Remove redundant checks for OP_MODE
        being MAX_MACHINE_MODE.
        (extract_bit_field_1): Remove redundant checks for EXT_MODE being
        MAX_MACHINE_MODE.

2012-10-31  Richard Sandiford  <rdsandiford@googlemail.com>

        * expmed.c (store_bit_field_1): Remove test for BLKmode values.

2012-10-31  Ralf Corsépius  <ralf.corsepius@rtems.org>,
            Joel Sherrill  <joel.sherrill@oarcorp.com>

        * config/sparc/t-rtems: New (Custom multilibs).
        * config/sparc/t-rtems-64: New (Custom multilibs).
        * config.gcc (sparc64-*-rtems*): Add sparc/t-rtems-64.
        (sparc-*-rtems*): Add sparc/t-rtems.

2012-10-31  Alan Modra  <amodra@gmail.com>

        * config/rs6000/rs6000.c (legitimize_reload_address): Remove code
        handling non-aligned ld/std.
        * config/rs6000/paired.md (movv2sf_paired): Use 'Y' instead of 'o'.
        * config/rs6000/vsx.md (vsx_mov, vsx_movti): Likewise.
        * config/rs6000/altivec.md (altivec_mov, altivec_movti): Likewise.
        * config/rs6000/dfp.md (movtd_internal): Use 'm' instead of 'o'.

2012-10-31  Alan Modra  <amodra@gmail.com>

        * config/rs6000/linux64.h (TARGET_OS_CPP_BUILTINS): Define _CALL_LINUX.

2012-10-31  Joern Rennecke  <joern.rennecke@embecosm.com>

        * lra-constraints.c (choose_split_class): Add ATTRIBUTE_UNUSED to
        hard_reg_class.

        PR target/52498
        * vmsdbgout.c (vmsdbgout_write_source_line): Comment out names of
        last two parameters.

2012-10-30  Alexandre Oliva <aoliva@redhat.com>

        PR debug/54551
        PR debug/54693
        * valtrack.c (dead_debug_promote_uses): Assert-check that
        global used bit was clear and initialize entry unconditionally.

2012-10-30  Eric Botcazou  <ebotcazou@adacore.com>

        * cse.c (hash_rtx_cb): Replace RTX_UNCHANGING_P with MEM_READONLY_P in
        head comment.
        (hash_rtx): Likewise.

2012-10-30  H.J. Lu  <hongjiu.lu@intel.com>

        PR rtl-optimization/55093
        * rtlanal.c (simplify_subreg_regno): Remove lra_in_progress
        check for ARG_POINTER_REGNUM.

2012-10-30  Steve Ellcey  <sellcey@mips.com>

        * config/mips/mti-linux.h (SYSROOT_SUFFIX_SPEC): Change order
        and add mabi=64.
        (DRIVER_SELF_SPECS): Make -n32 the default on mips64* archs.
        * config/mips/t-mti-linux (MULTILIB_OPTIONS): Change order.
        (MULTILIB_DIRNAMES): Ditto.
        (MULTILIB_EXCEPTIONS): New.

2012-10-30  Joern Rennecke  <joern.rennecke@embecosm.com>

        * lra-constraints.c (check_secondary_memory_needed_p):
        Add ATTRIBUTE_UNUSED to parameters.

2012-10-30  Richard Sandiford  <rdsandiford@googlemail.com>

        * defaults.h (SLOW_UNALIGNED_ACCESS): Provide default definition.
        * expmed.c (SLOW_UNALIGNED_ACCESS): Remove default definition.
        * expr.c (SLOW_UNALIGNED_ACCESS): Likewise.
        * lra-constraints.c (SLOW_UNALIGNED_ACCESS): Likewise.
        (simplify_operand_subreg): Don't check STRICT_ALIGNMENT here.

2012-10-30  Jan Hubicka  <jh@suse.cz>

        * ipa-inline-analysis.c (eliminated_by_inlining_prob): Cleanup.

2012-10-30  Jan Hubicka  <jh@suse.cz>

        * tree-ssa-loop-niter.c (number_of_iterations_exit): New parameter
        EVERY_ITERATION with implicit value of true.
        (record_estimate): Check dominance relationship of the basic block
        we are estimating on instead of relying on UPPER to be false.
        (struct ilb_data): Drop RELIABLE.
        (idx_infer_loop_bounds): Update.
        (infer_loop_bounds_from_ref): Drop parameter RELIABLE.
        (infer_loop_bounds_from_array): Drop parameter RELIABLE.
        (infer_loop_bounds_from_undefined): Update comments and handling
        of RELIABLE.
        (estimate_numbers_of_iterations_loop): Record all bounds.

2012-10-30  Richard Sandiford  <r.sandiford@uk.ibm.com>

        * lra-eliminations.c (lra_eliminate_regs_1): Use simplify_gen_subreg
        rather than gen_rtx_SUBREG.

2012-10-30  Richard Biener  <rguenther@suse.de>

        * gimple.h (gimple_store_p): New predicate.
        (gimple_assign_load_p): Likewise.
        * tree-inline.c (estimate_num_insns): Use it.

2012-10-30  Marc Glisse  <marc.glisse@inria.fr>

        * fold-const.c (fold_binary_op_with_conditional_arg): Handle vectors.
        (fold_binary_loc): Call it for VEC_COND_EXPR.

2012-10-30  James Greenhalgh  <james.greenhalgh@arm.com>
            Tejas Belagod  <tejas.belagod@arm.com>

        * config/aarch64/aarch64-simd.md
        (aarch64_simd_bsl<mode>_internal): New pattern.
        (aarch64_simd_bsl<mode>): Likewise.
        (aarch64_vcond_internal<mode>): Likewise.
        (vcondu<mode><mode>): Likewise.
        (vcond<mode><mode>): Likewise.
        * config/aarch64/iterators.md (UNSPEC_BSL): Add to define_constants.

2012-10-30  Richard Biener  <rguenther@suse.de>

        PR tree-optimization/55111
        * tree-ssa-pre.c (eliminate_insert): Properly fold the built stmt.

2012-10-30  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54963
        * config/sh/iterators.md (SIDI): New mode iterator.
        * config/sh/sh.md (negdi2): Use parallel around operation and T_REG
        clobber in expander.
        (*negdi2): Mark output operand as early clobbered.  Add T_REG clobber.
        Split after reload.  Simplify split code.
        (abssi2, absdi2): Fold expanders into abs<mode>2.
        (*abssi2, *absdi2): Fold into *abs<mode>2 insn_and_split.  Split insns
        before reload.
        (*negabssi2, *negabsdi2): Fold into *negabs<mode>2.  Add T_REG clobber.
        Split insns before reload.
        (negsi_cond): Reformat.  Use emit_move_insn instead of gen_movesi.
        (negdi_cond): Reformat.  Use emit_move_insn instead of a pair
        of gen_movsi.  Split insn before reload.

2012-10-30  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/53988
        * config/sh/sh.md (tstqi_t_zero): Rename to *tstqi_t_zero.
        (*tst<mode>_t_zero): New insns.
        * config/sh/iterators.md (lowpart_be, lowpart_le): New mode attributes.

2012-10-30  H.J. Lu  <hongjiu.lu@intel.com>

        * gimple-pretty-print.c (dump_gimple_bb_header): Avoid alloca.

2012-10-30  Jakub Jelinek  <jakub@redhat.com>

        PR debug/54953
        * valtrack.h (DEBUG_TEMP_AFTER_WITH_REG_FORCE): New.
        * valtrack.c (dead_debug_insert_temp): Use emit_debug_insn_after
        even for where == DEBUG_TEMP_AFTER_WITH_REG_FORCE.
        * dce.c (word_dce_process_block, dce_process_block): Pass
        DEBUG_TEMP_AFTER_WITH_REG_FORCE if insn is needed and therefore
        not going to be eliminated.

2012-10-29  Lawrence Crowl  <crowl@google.com>

        * sbitmap.h (sbitmap_copy): Rename bitmap_copy.
        (sbitmap_copy_n): Rename bitmap_copy_n.
        (sbitmap_equal): Rename bitmap_equal_p.
        (sbitmap_empty_p): Rename bitmap_empty_p.
        (sbitmap_range_empty_p): Rename bitmap_range_empty_p.
        (sbitmap_zero): Rename bitmap_clear.
        (sbitmap_ones): Rename bitmap_ones.
        (sbitmap_vector_zero): Rename bitmap_vector_clear.
        (sbitmap_vector_ones): Rename bitmap_vector_ones.
        (sbitmap_not): Rename bitmap_not.
        (sbitmap_a_and_b_cg): Commented out.
        (sbitmap_a_and_b): Rename bitmap_and.  Add bool return.
        (sbitmap_difference): Rename bitmap_and_compl.
        (sbitmap_a_or_b_cg): Commented out.
        (sbitmap_a_or_b): Rename bitmap_xor.  Add bool return.
        (sbitmap_a_xor_b_cg): Commented out.
        (sbitmap_a_xor_b): Rename bitmap_xor.  Add bool return.
        (sbitmap_a_and_b_or_c_cg): Rename bitmap_and_or.
        (sbitmap_a_and_b_or_c): Commented out.
        (sbitmap_a_or_b_and_c_cg): Rename bitmap_or_and.
        (sbitmap_a_or_b_and_c): Commented out.
        (sbitmap_union_of_diff_cg): Rename bitmap_ior_and_compl.
        (sbitmap_union_of_diff): Commented out.
        (dump_sbitmap): Rename dump_bitmap.
        (dump_sbitmap_file): Rename dump_bitmap_file.
        (debug_sbitmap): Rename debug_bitmap.
        (dump_sbitmap_vector): Rename dump_bitmap_vector.
        (sbitmap_first_set_bit): Rename bitmap_first_set_bit.
        (sbitmap_last_set_bit): Rename bitmap_last_set_bit.
        (sbitmap_a_subset_b_p): Rename bitmap_subset_p.
        (sbitmap_any_common_bits): Rename bitmap_intersect_p.
        (#define sbitmap_free): Reimplement as inline function.
        (#define sbitmap_vector_free): Reimplement as inline function.
        * bitmap.h (#define bitmap_zero): Remove as redundant.
        (#define bitmap_empty_p): Reimplement as inline function.
        (#define dump_bitmap): Reimplement as inline function.

2012-10-29  Jonathan Wakely  <jwakely.gcc@gmail.com>

        PR c++/54930
        * doc/invoke.texi (Warning Options): Document -Wno-return-local-addr.

2012-10-29  H.J. Lu  <hongjiu.lu@intel.com>

        * lra-assigns.c: Remove trailing white spaces.
        * lra-coalesce.c: Likewise.
        * lra-constraints.c: Likewise.
        * lra-eliminations.c: Likewise.
        * lra-int.h: Likewise.
        * lra-spills.c: Likewise.
        * lra.c: Likewise.

2012-10-29  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR c/53066
        * tree.h (FUNCTION_POINTER_TYPE_P): New.

2012-10-29  Alexandre Oliva <aoliva@redhat.com>

        PR debug/54693
        * valtrack.c (dead_debug_insert_temp): Defer rescan of
        newly-emitted debug insn.

2012-10-29  Alexandre Oliva <aoliva@redhat.com>

        PR debug/54693
        * tree-ssa-threadedge.c (thread_around_empty_block): Copy
        debug temps from predecessor before threading.

2012-10-29  Alexandre Oliva <aoliva@redhat.com>

        PR debug/54551
        PR debug/54693
        * valtrack.c (dead_debug_global_find): Accept NULL dtemp.
        (dead_debug_global_insert): Return new entry.
        (dead_debug_global_replace_temp): Return early if REG is no
        longer in place, or if dtemp was already substituted.
        (dead_debug_promote_uses): Insert for all defs and replace all
        debug uses at once.
        (dead_debug_local_finish): Release used after promotion.
        (dead_debug_insert_temp): Stop if dtemp is NULL.

2012-10-29  Alexandre Oliva <aoliva@redhat.com>

        PR debug/54693
        * loop-unroll.c (loop_exit_at_end_p): Skip debug insns.

2012-10-29  Alexandre Oliva <aoliva@redhat.com>

        PR debug/54693
        * config/i386/i386.c (add_parameter_dependencies): Stop
        backward scan at the insn before the incoming head.
        (ix86_dependencies_evaluation_hook): Skip debug insns.  Stop
        if first_arg is head.

2012-10-29  Andrew Pinski  <apinski@cavium.com>

        * config/aarch64/aarch64-protos.h (aarch64_load_tp): New proto.
        * config/aarch64/aarch64.c (aarch64_load_tp): Export.
        (aarch64_init_builtins): Don't add __builtin_thread_pointer builtin.
        * config/aarch64/aarch64.h (aarch64_builtins): Delete
        AARCH64_BUILTIN_THREAD_POINTER.
        * config/aarch64/aarch64.md (get_thread_pointerdi): New pattern.

2012-10-29  Marc Glisse  <marc.glisse@inria.fr>

        PR middle-end/55027
        * tree.c (real_zerop, real_onep, real_twop, real_minus_onep):
        Handle VECTOR_CST.

2012-10-29  Vladimir Makarov  <vmakarov@redhat.com>

        * rtlanal.c (strip_address_mutation): Use SUBREG_REG instead of XEXP.

2012-10-29  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (ix86_decompose_address): Use simplify_gen_subreg
        for all addresses, zero-extended with AND.

2012-10-29  Vladimir Makarov  <vmakarov@redhat.com>

        PR middle-end/55116
        * rtlanal.c (strip_address_mutation): Add SUBREG case.

2012-10-29  Jan Hubicka  <jh@suse.cz>

        * ipa-inline.c (want_inline_function_called_once_p): Rename to ...
        (want_inline_function_to_all_callers_p): check also functions with
        multiple callers.
        (ipa_inline): Handle inlining for size into multiple callers.

2012-10-29  Richard Guenther  <rguenther@suse.de>

        PR middle-end/53695
        * tracer.c (tracer): Fixup loop structure.
        * cfgloopmanip.c (force_single_succ_latches): Add assert.
        (fix_loop_structure): Re-compute loop latches and disambiguate
        loops with multiple latches if required.

2012-10-29  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (ix86_decompose_address): Use simplify_gen_subreg
        to check SImode equivalent of address, zero-extended with AND RTX.
        * config/i386/i386.md (ashift to lea splitter): Split to SImode mult.
        (simple lea to add/shift peephole2s): Remove peephole2s that operate
        on subregs of DImode operations.

2012-10-28  Vladimir Makarov  <vmakarov@redhat.com>

        PR rtl-optimization/55106
        * lra-constraints.c (skip_usage_debug_insns): New function.
        (check_secondary_memory_needed_p): Ditto.
        (inherit_reload_reg): Use the new functions.  Improve debug output.

2012-10-29  Jonathan Wakely  <jwakely.gcc@gmail.com>

        * doc/cpp.texi (Search Path): Fix outdated C++ path.

2012-10-28  Jan Hubicka  <jh@suse.cz>

        * ipa-inline-analysis.c (eliminated_by_inlining_prob): Handle
        &this->field expressions.

2012-10-28  Vladimir Makarov  <vmakarov@redhat.com>

        * rtl.h (struct rtx_def): Add a comment for member unchanging.
        * lra-int.h (LRA_TEMP_CLOBBER_P): New macro.
        (lra_hard_reg_substitution): Rename to lra_final_code_change.
        * lra-constraints.c (match_reload): Mark temporary clobbers.
        * lra-spill.c (lra_hard_reg_substitution): Rename to
        lra_final_code_change.  Remove temporary clobbers.
        * lra.c (lra): Rename to lra_final_code_change.

2012-10-28  Jan Hubicka  <jh@suse.cz>

        * ipa-inline.c (edge_badness): Fix overflow.
        (inline_small_functions): Initialize SCCs correctly.
        (do_estimate_edge_time, do_estimate_edge_hints): Skip self
        recursive functions in SCC hints.

2012-10-28  Steven Bosscher  <steven@gcc.gnu.org>

        PR rtl-optimization/38711
        * ira.c (ira): Remove DF_LIVE if the problem is in the stack.
        (do_reload): Add it back at the end for -O2 and higher.

        * function.c (thread_prologue_and_epilogue_insns): Use
        REG_SET_TO_HARD_REG_SET instead of CLEAR_HARD_REG_SET and
        reg_set_to_hard_reg_set.

2012-10-28  Jan Hubicka  <jh@suse.cz>

        * ipa-inline.c (edge_badness): Reduce precision; use scc hints.
        (inline_small_functions): Fix dumps; update all callees after inlining.
        * ipa-inline.h (INLINE_HINT_in_scc, INLINE_HINT_same_scc): New
        constants.
        (inline summary): Add SCC_NO.
        * ipa-inline-analysis.c (dump_inline_hints): Dump SCC hints.
        (reset_inline_summary): Reset scc_no.
        (estimate_node_size_and_time): Set in_scc hint.
        (do_estimate_edge_time): Add same_scc hint.
        (do_estimate_edge_hints): Likewise.

2012-10-28  Andreas Schwab  <schwab@linux-m68k.org>

        * doc/cppopts.texi: Fix use of @item vs. @itemx inside @table.
        * doc/extend.texi: Likewise.
        * doc/generic.texi: Likewise.
        * doc/invoke.texi: Likewise.
        * doc/md.texi: Likewise.
        * doc/sourcebuild.texi: Likewise.

        * doc/tm.texi.in (Misc): Add newline before @end.
        * doc/tm.texi: Update.

2012-10-27  Joern Rennecke  <joern.rennecke@embecosm.com>

        * lra-assigns.c (find_hard_regno_for): Fix use of WORDS_BIG_ENDIAN.

2012-10-27  Georg-Johann Lay  <avr@gjlay.de>

        PR target/55034
        * config/avr/avr.c (avr_out_lpm): Remove unused regno_dest.

2012-10-27  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/55042
        * config/sh/sh.c (sh1_builtin_p): Comment out unused function.

2012-10-27  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*lea<mode>): Remove unneeded temporary.

2012-10-26  David S. Miller  <davem@davemloft.net>

        * config/sparc/constraints.md: Update unused letter list, move
        "w" near other memory constraints.  Remove no longer relevant
        comment.
        * doc/md.texi: Sync sparc constraint documentation with reality.

2012-10-26  DJ Delorie  <dj@redhat.com>

        * config/rl78/rl78.c (rl78_as_legitimate_address): Do not allow
        reg+addend addresses for the _far namespace.

2012-10-26  Segher Boessenkool  <segher@kernel.crashing.org>

        * config/rs6000/sync.md (ATOMIC): Correct DI condition.

2012-10-26  Jakub Jelinek  <jakub@redhat.com>

        PR debug/54970
        * cfgexpand.c (expand_debug_expr): Expand &MEM_REF[&var, n]
        as DEBUG_IMPLICIT_PTR + n if &var expands to DEBUG_IMPLICIT_PTR.
        * tree-sra.c (create_access_replacement): Allow also MEM_REFs
        with ADDR_EXPR first operand in DECL_DEBUG_EXPR expressions.
        * var-tracking.c (track_expr_p): Handle MEM_REFs in DECL_DEBUG_EXPR
        expressions.
        * dwarf2out.c (add_var_loc_to_decl): Likewise.

2012-10-26  Jeff Law  <law@redhat.com>

        * tree-ssa-threadedge.c (cond_arg_set_in_bb): Use last stmt.

2012-10-26  Gunther Nikl  <gnikl@users.sourceforge.net>

        * common/config/m68k/m68k-common.c (m68k_handle_option): Set
        gcc_options fields of opts_set for -m68020-40 and -m68020-60.

2012-10-26  Teresa Johnson  <tejohnson@google.com>

        * ree.c (add_removable_extension): Remove unnecessary
        mode check with other extension.
        * testsuite/gcc.c-torture/execute/20111227-2.c: New test.
        * testsuite/gcc.c-torture/execute/20111227-3.c: Ditto.

2012-10-26  Jan Hubicka  <jh@suse.cz>

        * ipa-inline-transform.c (inline_call): Only account size changes
        for !DECL_EXTERNAL.

2012-10-26  Martin Jambor  <mjambor@suse.cz>

        PR debug/54971
        * tree-sra.c (struct access): New flag grp_to_be_debug_replaced.
        (dump_access): Dump the new flag.
        (analyze_access_subtree): Set the new flag when appropriate.
        (create_access_replacement): Handle debug replacements differently.
        (generate_subtree_copies): Handle the grp_to_be_debug_replaced flag.
        (init_subtree_with_zero): Likewise.
        (sra_modify_expr): Likewise.
        (load_assign_lhs_subreplacements): Likewise.
        (sra_modify_assign): Likewise.

2012-10-23  Yuri Rumyantsev  <ysrumyan@gmail.com>

        * config/i386/i386.c (insn_is_function_arg) : Add check on CALL
        instruction.
        (ix86_dependencies_evaluation_hook): Insert dependencies in all
        predecessors of call block for non-trivial region avoiding creation
        of loop-carried dependency to avoid cross-block motion of HW registers.

2012-10-26  Richard Biener  <rguenther@suse.de>

        PR middle-end/54824
        * tree-optimize.c (execute_fixup_cfg): Insert __builtin_unreachable
        at the end of blocks with no successors.

2012-10-26  Alexander Ivchenko  <alexander.ivchenko@intel.com>
            Uros Bizjak  <ubizjak@gmail.com>

        * common/config/i386/i386-common.c
        (OPTION_MASK_ISA_FXSR_SET): New.
        (OPTION_MASK_ISA_XSAVE_SET): Likewise.
        (OPTION_MASK_ISA_XSAVEOPT_SET): Likewise.
        (ix86_handle_option): Handle mfxsr, mxsave, mxsaveopt options.
        * config.gcc (i[34567]86-*-*): Add fxsrintrin.h,
        xsaveintrin.h, xsaveoptintrin.h.
        (x86_64-*-*): Likewise.
        * config/i386/fxsrintrin.h: New header.
        * config/i386/xsaveintrin.h: Likewise.
        * config/i386/xsaveoptintrin.h: Likewise.
        * config/i386/driver-i386.c (host_detect_local_cpu): Detect
        FXSR/XSAVE/XSAVEOPT support.
        * config/i386/i386-builtin-types.def
        (VOID_FTYPE_PVOID_INT64): New function type.
        * config/i386/i386-c.c: Define __FXSR__, __XSAVE__
        and __XSAVEOPT__ if needed.
        * config/i386/i386.c (ix86_target_string): Define -mfxsr,
         -mxsave and -mxsaveopt options.
        (PTA_FXSR): New.
        (PTA_XSAVE): Likewise.
        (PTA_XSAVEOPT): Likewise.
        (ix86_option_override_internal): Handle new option.
        (processor_alias_table): Added PTA_FXSR, PTA_XSAVE, PTA_XSAVEOPT.
        (ix86_valid_target_attribute_inner_p): Add OPT_mfxsr,
        OPT_mxsave, OPT_mxsaveopt.
        (ix86_builtins): Add IX86_BUILTIN_FXSAVE, IX86_BUILTIN_FXRSTOR,
        IX86_BUILTIN_FXSAVE64, IX86_BUILTIN_XSAVE, IX86_BUILTIN_XSAVE64,
        IX86_BUILTIN_XRSTOR, IX86_BUILTIN_XRSTOR64, IX86_BUILTIN_XSAVEOPT,
        IX86_BUILTIN_XSAVEOPT64.
        (ix86_expand_builtin): Handle these built-ins.
        * config/i386/i386.h (TARGET_FXSR): New.
        (TARGET_XSAVE): Likewise.
        (TARGET_XSAVEOPT): Likewise.
        * config/i386/i386.md (ANY_XSAVE): New int iterator.
        (ANY_XSAVE64): Likewise.
        (xsave): New int attribute.
        (fxsave): New instruction.
        (fxsave64): Likewise.
        (fxrstor): Likewise.
        (fxrstor64): Likewise.
        (<xsave>): Likewise.
        (<xsave>_rex64): Likewise.
        (xrstor): Likewise.
        (xrstor_rex64): Likewise.
        (xrstor64): Likewise.
        * config/i386/i386.opt (mfxsr): New.
        (mxsave): Likewise.
        (mxsaveopt): Likewise.
        * config/i386/x86intrin.h: Include
        xsaveintrin.h, fxsrintrin.h, xsaveoptintrin.h.

2012-10-26  Ralf Corsépius  <ralf.corsepius@rtems.org>

        * config/avr/t-rtems: Revert previous commit.

2012-10-26  Richard Sandiford  <rdsandiford@googlemail.com>

        PR bootstrap/55049
        * Makefile.in (rtlanal.o): Add dependency on addresses.h.
        * rtl.h (address_info): New structure.
        (strip_address_mutations, decompose_address, decompose_lea_address)
        (decompose_mem_address, update_address, get_index_scale)
        (get_index_code): Declare.
        * rtlanal.c: Include addresses.h.
        (strip_address_mutations, must_be_base_p, must_be_index_p)
        (set_address_segment, set_address_base, set_address_index)
        (set_address_disp, decompose_incdec_address, decompose_automod_address)
        (extract_plus_operands, baseness, decompose_normal_address)
        (decompose_address, decompose_lea_address, decompose_mem_address)
        (update_address, get_index_scale, get_index_code): New functions.
        * lra-constraints.c (strip_subreg): New function.
        (address, extract_loc_address_regs, extract_address_regs)
        (get_index_scale): Delete.
        (process_addr_reg): Apply strip_subreg to the location.
        (uses_hard_regs_p): Use decompose_mem_address.
        (valid_address_p, base_plus_disp_to_reg, can_add_disp_p)
        (equiv_address_substitution): Take an address_info rather
        than an address.  Remove other arguments.  Avoid using Pmode.
        (process_address): Use decompose_mem_address and decompose_lea_address.
        Update calls to above functions.

2012-10-26  Richard Sandiford  <rdsandiford@googlemail.com>

        * lra-constraints.c (process_address): Tighten arguments to
        base_reg_class.  Use simplify_gen_binary to generate PLUS rtxes.

2012-10-26  Richard Sandiford  <rdsandiford@googlemail.com>

        * lra-constraints.c (get_index_scale, can_add_disp_p): New functions.
        (equiv_address_substitution): Use them.

2012-10-26  Richard Sandiford  <rdsandiford@googlemail.com>

        * lra-constraints.c (valid_address_p): New function, split out from...
        (process_address): ...here.

2012-10-26  Richard Sandiford  <rdsandiford@googlemail.com>

        * lra-constraints.c (process_address): Describe the kinds of address
        that we might see.

2012-10-25  Vladimir Makarov  <vmakarov@redhat.com>

        * lra-int.h (lra_assert): Redefine it gcc_checking_assert.
        * lra-constraints.c (check_and_process_move): Remove #if
        ENABLE_ASSERT_CHECKING.

2012-10-26  Ralf Corsépius  <ralf.corsepius@rtems.org>

        * config/avr/rtems.h (TARGET_OS_CPP_BUILTINS): Remove
        __USE_INIT_FINI__.
        * config/avr/t-rtems (LIB1ASMFUNCS): Filter out _exit.

2012-10-25  David S. Miller  <davem@davemloft.net>

        * config/sparc/constraints.md ("U"): Delete.
        * config/sparc/sparc.md: Use 'r' constraint instead of 'U'.
        * config/sparc/sync.md: Likewise.

2012-10-25  Lawrence Crowl  <crowl@google.com>

        * hash-table.h: Add usage documentation.
        (template struct typed_free_remove): Clarify documentation.
        Rename template parameter.
        (struct typed_noop_remove): Likewise.
        (descriptor concept): Change typedef T to value_type.
        Add typedef compare_type.  Use more precise template parameter name,
        Descriptor instead of Descr.  Update users to match.
        (struct hash_table): Change 'find' parameters to use compare_type
        instead of the value type.

2012-10-25  Jan Hubicka  <jh@suse.cz>

        * ipa-cp.c (ipcp_discover_new_direct_edges): If something was turned
        to direct call update the summary.
        * ipa-inline-transform.c (inline_call): Sanity check that summaries
        match the predicted effect; fix updating of summary after edge
        redirection.
        * ipa-inline-analysis.c (inline_node_duplication_hook): Do not try
        to update the summary and recompute it instead.
        (estimate_function_body_sizes): Fix self size estimation; double
        check that it agrees with inline_update_overall_summary.
        (estimate_edge_size_and_time): Handle devirtualizaiton costs.
        (estimate_edge_devirt_benefit): Update to be called from
        estimate_edge_size_and_time.
        (estimate_calls_size_and_time): Update.
        (estimate_node_size_and_time): Watch overflows.
        (inline_merge_summary): Likewise.
        * ipa-prob.c: Include ipa-inline.h
        (ipa_make_edge_direct_to_target): After redirection update the summary.

2012-10-25  Cary Coutant  <ccoutant@google.com>

        PR debug/55063
        * dwarf2out.c (prune_unused_types_prune): Check whether DIE is
        already a declaration.

2012-10-25  Vladimir Makarov  <vmakarov@redhat.com>

        * lra-assigns.c (assign_by_spills): Add non-reload pseudos
        assigned to hard register to changed_pseudo_bitmap.

2012-10-25  Ralf Corsépius  <ralf.corsepius@rtems.org>

        * config.gcc (microblaze*-*-rtems*): New target.
        * config/microblaze/rtems.h: New.
        * config/microblaze/t-rtems: New.

2012-10-25  Jan Hubicka  <jh@suse.cz>

        PR tree-optimize/54980
        * tree-ssa-loop-ivcanon.c (constant_after_peeling): Fix obvious typo.
        (loop_edge_to_cancel): Be sure that the edge is from an conditional
        so we can cancel it.

2012-10-25  Marc Glisse  <marc.glisse@inria.fr>

        PR c++/54427
        * tree.c (signed_or_unsigned_type_for): Handle vectors.

2012-10-25  Jan Hubicka  <jh@suse.cz>

        * ipa-inline.c (recursive_inlining): Redirect to master
        clone before testing profitability.

2012-10-25  Richard Biener  <rguenther@suse.de>

        PR tree-optimization/54902
        * tree-ssa-pre.c (fini_eliminate): Return TODO.
        (do_pre): Adjust.
        (execute_fre): Likewise.
        * tree-ssa-tailmerge.c (tail_merge_optimize): Delete unreachable
        blocks before computing dominators.

2012-10-25  Richard Sandiford  <rdsandiford@googlemail.com>

        * expr.c (emit_block_move_via_loop): Use simplify_gen_binary
        rather than gen_rtx_PLUS.

2012-10-24  Vladimir Makarov  <vmakarov@redhat.com>

        PR bootstrap/55068
        PR regression/55050
        * ira.c (setup_reg_renumber): Fix assert.
        * ira-emit.c (emit_move_list): Update equivalences only for LRA.

2012-10-24  Vladimir Makarov  <vmakarov@redhat.com>

        PR bootstrap/55067
        * lra.c: Rename loc to sloc and loc_t to sloc_t.

2012-10-24  Sharad Singhai  <singhai@google.com>

        * config/rs6000/rs6000.c (rs6000_density_test): Use dump_enabled_p
        instead of dump_kind_p.

2012-10-24  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR c++/54928
        * tree-diagnostic.c (maybe_unwind_expanded_macro_loc):
        Use diagnostic_append_note.
        * diagnostic.c (diagnostic_build_prefix): Make diagnostic const.
        (default_diagnostic_finalizer): Do not destroy prefix here.
        (diagnostic_report_diagnostic): Destroy it here.
        (diagnostic_append_note): New.
        * diagnostic.h (diagnostic_append_note): Declare.

2012-10-24  Vladimir Makarov  <vmakarov@redhat.com>

        PR rtl-optimization/55055
        * lra-spills.c (alter_subregs): New function.
        (lra_hard_reg_substitution): Use it.

2012-10-24  Sharad Singhai  <singhai@google.com>

        * dumpfile.c (dump_enabled_p): Make it inline and move the definition
        to dumpfile.h.
        (dump_kind_p): Deleted. Functionality replaced by dump_enabled_p.
        Make alt_dump_file extern.
        * dumpfile.h (dump_enabled_p): Move inline definition here.
        (dump_kind_p): Delete declaration.
        Add extern declaration of alt_dump_file.
        * toplev.c: Move dump_file and dump_file_name to dumpfile.c.
        * tree-vect-loop-manip.c: Replace all uses of dump_kind_p with
        dump_enabled_p.
        * tree-vectorizer.c: Likewise.
        * tree-vect-loop.c: Likewise.
        * tree-vect-data-refs.c: Likewise.
        * tree-vect-patterns.c: Likewise.
        * tree-vect-stmts.c: Likewise.
        * tree-vect-slp.c: Likewise.

2012-10-24  Richard Sandiford  <rdsandiford@googlemail.com>

        * expmed.c (lowpart_bit_field_p): Add missing == 0 check.

2012-10-24  Vladimir Makarov  <vmakarov@redhat.com>

        PR bootstrap/55049
        * lra-constraints.c (extract_loc_address_regs): Pass top_p for
        ZERO_EXTEND operand.

2012-10-24  Vladimir Makarov  <vmakarov@redhat.com>

        PR bootstrap/55048
        * lra-constraints.c (update_ebb_live_info): Skip
        non-NOTE_INSN_BASIC_BLOCK notes.

2012-10-24  Jakub Jelinek  <jakub@redhat.com>

        PR rtl-optimization/55010
        * cse.c (fold_rtx) <RTX_COMPARE>: Call copy_rtx on folded_arg{0,1}
        before passing it to simplify_relational_operation.

        PR debug/54828
        * gimple.h (is_gimple_sizepos): New inline function.
        * gimplify.c (gimplify_one_sizepos): Use it.  Remove useless
        final assignment to expr variable.
        * tree.c (RETURN_TRUE_IF_VAR): Return true also if
        !TYPE_SIZES_GIMPLIFIED (type) and _t is going to be gimplified
        into a local temporary.

2012-10-23  David S. Miller  <davem@davemloft.net>

        * config/sparc/constraints.md ("T", "W"): Change
        definitions to use define_memory_constraint.  Do not match 'reg'.
        * config/sparc/sparc.c (memory_ok_for_ldd): Remove all non-MEM
        handling code, update comment.

2012-10-23  Ian Lance Taylor  <iant@google.com>

        * doc/extend.texi (Extended Asm): The '+' constraint does not
        require a register.

2012-10-23  Jeff Law  <law@redhat.com>

        * tree-ssa-threadedge.c (thread_across_edge): Remove unused
        parameter in call to cond_arg_set_in_bb.

        * tree-ssa-threadedge.c (cond_arg_set_in_bb): Remove unused
        debugging argument.

        PR tree-optimization/54985
        * tree-ssa-threadedge.c (cond_arg_set_in_bb): New function extracted
        from thread_across_edge.
        (thread_across_edge): Use it in all cases where we might thread
        across a back edge.

2012-10-23  Vladimir Makarov  <vmakarov@redhat.com>

        * lra-constraints.c (update_ebb_live_info): Process empty blocks.

2012-10-23  Richard Sandiford  <rdsandiford@googlemail.com>

        * expmed.c (store_split_bit_field): Update the calls to
        extract_fixed_bit_field.  In the big-endian case, always
        use the mode of OP0 to count the number of significant bits.
        (extract_bit_field_1): Remove unit, offset, bitpos and
        byte_offset from the outermost scope.  Express conditions in terms
        of bitnum rather than offset, bitpos and byte_offset.  Move the
        computation of MODE1 to the block that needs it.  Use MODE unless
        the TMODE-based mode_for_size calculation succeeds.  Split the
        plain move cases into two, one for memory accesses and one for
        register accesses.  Generalize the memory case, freeing it from
        the old register-based endian checks.  Move the INT_MODE calculation
        above the code that needs it.  Use simplify_gen_subreg to handle
        multiword OP0s.  If the field still spans several words, pass it
        directly to extract_split_bit_field.  Assume after that point
        that both targets and register sources fit within a word.
        Replace x-prefixed variables with non-prefixed forms.
        Compute the bitpos for ext(z)v register operands directly in the
        chosen unit size, rather than going through an intermediate
        BITS_PER_WORD unit size.  Simplify the containment check
        used when forcing OP0 into a register.  Update the call to
        extract_fixed_bit_field.
        (extract_fixed_bit_field): Replace the bitpos and offset parameters
        with a single bitnum parameter, of the same form as extract_bit_field.
        Assume that OP0 contains the full field.  Simplify the memory offset
        calculation and containment check for volatile bitfields.  Make the
        offset explicit when volatile bitfields force a misaligned access.
        Remove WARNED and fix long lines.  Assert that the processed OP0
        has an integral mode.
        (store_split_bit_field): Update the call to store_fixed_bit_field.

2012-10-23  Richard Sandiford  <rdsandiford@googlemail.com>

        * expmed.c (lowpart_bit_field_p): New function.
        (store_bit_field_1): Remove unit, offset, bitpos and byte_offset
        from the outermost scope.  Express conditions in terms of bitnum
        rather than offset, bitpos and byte_offset.  Split the plain move
        cases into two, one for memory accesses and one for register accesses.
        Allow simplify_gen_subreg to fail rather than calling validate_subreg.
        Move the handling of multiword OP0s after the code that coerces VALUE
        to an integer mode.  Use simplify_gen_subreg for this case and assert
        that it succeeds.  If the field still spans several words, pass it
        directly to store_split_bit_field.  Assume after that point that
        both sources and register targets fit within a word.  Replace
        x-prefixed variables with non-prefixed forms.  Compute the bitpos
        for insv register operands directly in the chosen unit size, rather
        than going through an intermediate BITS_PER_WORD unit size.
        Update the call to store_fixed_bit_field.
        (store_fixed_bit_field): Replace the bitpos and offset parameters
        with a single bitnum parameter, of the same form as store_bit_field.
        Assume that OP0 contains the full field.  Simplify the memory offset
        calculation.  Assert that the processed OP0 has an integral mode.
        (store_split_bit_field): Update the call to store_fixed_bit_field.

2012-10-23  Paul Koning  <ni1d@arrl.net>

        PR debug/54508
        * dwarf2out.c (prune_unused_types_prune): If pruning a class and
        not all its children were marked, add DW_AT_declaration flag.

2012-10-23  Ian Bolton  <ian.bolton@arm.com>
            James Greenhalgh  <james.greenhalgh@arm.com>
            Jim MacArthur  <jim.macarthur@arm.com>
            Marcus Shawcroft  <marcus.shawcroft@arm.com>
            Nigel Stephens  <nigel.stephens@arm.com>
            Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>
            Richard Earnshaw  <rearnsha@arm.com>
            Sofiane Naci  <sofiane.naci@arm.com>
            Stephen Thomas  <stephen.thomas@arm.com>
            Tejas Belagod  <tejas.belagod@arm.com>
            Yufeng Zhang  <yufeng.zhang@arm.com>

        * config.gcc: Add AArch64.
        * configure.ac: Add AArch64 TLS support detection.
        * configure: Regenerate.

2012-10-23  Ian Bolton  <ian.bolton@arm.com>
            James Greenhalgh  <james.greenhalgh@arm.com>
            Jim MacArthur  <jim.macarthur@arm.com>
            Chris Schlumberger-Socha <chris.schlumberger-socha@arm.com>
            Marcus Shawcroft  <marcus.shawcroft@arm.com>
            Nigel Stephens  <nigel.stephens@arm.com>
            Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>
            Richard Earnshaw  <rearnsha@arm.com>
            Sofiane Naci  <sofiane.naci@arm.com>
            Stephen Thomas  <stephen.thomas@arm.com>
            Tejas Belagod  <tejas.belagod@arm.com>
            Yufeng Zhang  <yufeng.zhang@arm.com>

        * doc/invoke.texi (AArch64 Options): New.
        * doc/md.texi (Machine Constraints): Add AArch64.

2012-10-23  Ian Bolton  <ian.bolton@arm.com>
            James Greenhalgh  <james.greenhalgh@arm.com>
            Jim MacArthur  <jim.macarthur@arm.com>
            Chris Schlumberger-Socha <chris.schlumberger-socha@arm.com>
            Marcus Shawcroft  <marcus.shawcroft@arm.com>
            Nigel Stephens  <nigel.stephens@arm.com>
            Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>
            Richard Earnshaw  <rearnsha@arm.com>
            Sofiane Naci  <sofiane.naci@arm.com>
            Stephen Thomas  <stephen.thomas@arm.com>
            Tejas Belagod  <tejas.belagod@arm.com>
            Yufeng Zhang  <yufeng.zhang@arm.com>

        * common/config/aarch64/aarch64-common.c: New file.
        * config/aarch64/aarch64-arches.def: New file.
        * config/aarch64/aarch64-builtins.c: New file.
        * config/aarch64/aarch64-cores.def: New file.
        * config/aarch64/aarch64-elf-raw.h: New file.
        * config/aarch64/aarch64-elf.h: New file.
        * config/aarch64/aarch64-generic.md: New file.
        * config/aarch64/aarch64-linux.h: New file.
        * config/aarch64/aarch64-modes.def: New file.
        * config/aarch64/aarch64-option-extensions.def: New file.
        * config/aarch64/aarch64-opts.h: New file.
        * config/aarch64/aarch64-protos.h: New file.
        * config/aarch64/aarch64-simd.md: New file.
        * config/aarch64/aarch64-tune.md: New file.
        * config/aarch64/aarch64.c: New file.
        * config/aarch64/aarch64.h: New file.
        * config/aarch64/aarch64.md: New file.
        * config/aarch64/aarch64.opt: New file.
        * config/aarch64/arm_neon.h: New file.
        * config/aarch64/constraints.md: New file.
        * config/aarch64/gentune.sh: New file.
        * config/aarch64/iterators.md: New file.
        * config/aarch64/large.md: New file.
        * config/aarch64/predicates.md: New file.
        * config/aarch64/small.md: New file.
        * config/aarch64/sync.md: New file.
        * config/aarch64/t-aarch64-linux: New file.
        * config/aarch64/t-aarch64: New file.

2012-10-23  Michael Matz  <matz@suse.de>

        * tree-ssa-operands.h (struct def_optype_d, def_optype_p): Remove.
        (ssa_operands.free_defs): Remove.
        (DEF_OP_PTR, DEF_OP): Remove.
        (struct ssa_operand_iterator_d): Remove 'defs', add 'flags' members,
        rename 'phi_stmt' to 'stmt', 'phi_i' to 'i' and 'num_phi' to 'numops'.
        * gimple.h (gimple_statement_with_ops.def_ops): Remove.
        (gimple_def_ops, gimple_set_def_ops): Remove.
        (gimple_vdef_op): Don't take const gimple, adjust.
        (gimple_asm_input_op, gimple_asm_input_op_ptr,
        gimple_asm_set_input_op, gimple_asm_output_op,
        gimple_asm_output_op_ptr, gimple_asm_set_output_op): Adjust asserts,
        and rewrite to move def operands to front.
        (gimple_asm_clobber_op, gimple_asm_set_clobber_op,
        gimple_asm_label_op, gimple_asm_set_label_op): Correct asserts.
        * tree-ssa-operands.c (build_defs): Remove.
        (init_ssa_operands): Don't initialize it.
        (fini_ssa_operands): Don't free it.
        (cleanup_build_arrays): Don't truncate it.
        (finalize_ssa_stmt_operands): Don't assert on it.
        (alloc_def, add_def_op, append_def): Remove.
        (finalize_ssa_defs): Remove building of def_ops list.
        (finalize_ssa_uses): Don't mark for SSA renaming here, ...
        (add_stmt_operand): ... but here, don't call append_def.
        (get_indirect_ref_operands): Remove recurse_on_base argument.
        (get_expr_operands): Adjust call to get_indirect_ref_operands.
        (verify_ssa_operands): Don't check def operands.
        (free_stmt_operands): Don't free def operands.
        * gimple.c (gimple_copy): Don't clear def operands.
        * tree-flow-inline.h (op_iter_next_use): Adjust to explicitely
        handle def operand.
        (op_iter_next_tree, op_iter_next_def): Ditto.
        (clear_and_done_ssa_iter): Clear new fields.
        (op_iter_init): Adjust to setup new iterator structure.
        (op_iter_init_phiuse): Adjust.

2012-10-23  Greta Yorsh  <Greta.Yorsh@arm.com>

        * config/arm/arm.c (offset_ok_for_ldrd_strd): Return false for Thumb1.

2012-10-23  Vladimir Makarov  <vmakarov@redhat.com>

        * dbxout.c (dbxout_symbol_location): Pass new argument to alter_subreg.
        * dwarf2out.c: Include ira.h and lra.h.
        (based_loc_descr, compute_frame_pointer_to_fb_displacement): Use
        lra_eliminate_regs for LRA instead of eliminate_regs.
        * expr.c (emit_move_insn_1): Pass an additional argument to
        emit_move_via_integer.  Use emit_move_via_integer for LRA only if
        the insn is recognized.
        * emit-rtl.c (gen_rtx_REG): Add lra_in_progress.
        (validate_subreg): Don't check offset for LRA and floating point modes.
        * final.c (final_scan_insn, cleanup_subreg_operands): Pass new
        argument to alter_subreg.
        (walk_alter_subreg, output_operand): Ditto.
        (alter_subreg): Add new argument.
        * gcse.c (calculate_bb_reg_pressure): Add parameter to
        ira_setup_eliminable_regset call.
        * ira.c: Include lra.h.
        (ira_init_once, ira_init, ira_finish_once): Call lra_start_once,
        lra_init, lra_finish_once in anyway.
        (ira_setup_eliminable_regset): Add parameter.  Remove need_fp.
        Call lra_init_elimination and mark HARD_FRAME_POINTER_REGNUM as
        living forever if frame_pointer_needed.
        (setup_reg_class_relations): Set up ira_reg_class_subset.
        (ira_reg_equiv_invariant_p, ira_reg_equiv_const): Remove.
        (find_reg_equiv_invariant_const): Ditto.
        (setup_reg_renumber): Use ira_equiv_no_lvalue_p instead of
        ira_reg_equiv_invariant_p.  Skip caps for LRA.
        (setup_reg_equiv_init, ira_update_equiv_info_by_shuffle_insn): New
        functions.
        (ira_reg_equiv_len, ira_reg_equiv): New externals.
        (ira_reg_equiv): New.
        (ira_expand_reg_equiv, init_reg_equiv, finish_reg_equiv): New
        functions.
        (no_equiv, update_equiv_regs): Use ira_reg_equiv instead of
        reg_equiv_init.
        (setup_reg_equiv): New function.
        (ira_use_lra_p): New global.
        (ira): Set up lra_simple_p and ira_conflicts_p.  Set up and
        restore flag_caller_saves and flag_ira_region.  Move
        initialization of ira_obstack and ira_bitmap_obstack upper.  Call
        init_reg_equiv, setup_reg_equiv, and setup_reg_equiv_init instead
        of initialization of ira_reg_equiv_len, ira_reg_equiv_invariant_p,
        and ira_reg_equiv_const.  Call ira_setup_eliminable_regset with a
        new argument.  Don't flatten IRA IRA for LRA.  Don't reassign
        conflict allocnos for LRA. Call finish_reg_equiv.
        (do_reload): Prepare code for LRA call.  Call LRA.
        * ira.h (ira_use_lra_p): New external.
        (struct target_ira): Add members x_ira_class_subset_p
        x_ira_reg_class_subset, and x_ira_reg_classes_intersect_p.
        (ira_class_subset_p, ira_reg_class_subset): New macros.
        (ira_reg_classes_intersect_p): New macro.
        (struct ira_reg_equiv): New.
        (ira_setup_eliminable_regset): Add an argument.
        (ira_expand_reg_equiv, ira_update_equiv_info_by_shuffle_insn): New
        prototypes.
        * ira-color.c (color_pass, move_spill_restore, coalesce_allocnos):
        Use ira_equiv_no_lvalue_p.
        (coalesce_spill_slots, ira_sort_regnos_for_alter_reg): Ditto.
        * ira-emit.c (ira_create_new_reg): Call ira_expand_reg_equiv.
        (generate_edge_moves, change_loop) Use ira_equiv_no_lvalue_p.
        (emit_move_list): Simplify code.  Call
        ira_update_equiv_info_by_shuffle_insn.  Use ira_reg_equiv instead
        of ira_reg_equiv_invariant_p and ira_reg_equiv_const.  Change assert.
        * ira-int.h (struct target_ira_int): Remove x_ira_class_subset_p
        and x_ira_reg_classes_intersect_p.
        (ira_class_subset_p, ira_reg_classes_intersect_p): Remove.
        (ira_reg_equiv_len, ira_reg_equiv_invariant_p): Ditto.
        (ira_reg_equiv_const): Ditto.
        (ira_equiv_no_lvalue_p): New function.
        * jump.c (true_regnum): Always use hard_regno for subreg_get_info
        when lra is in progress.
        * haifa-sched.c (sched_init): Pass new argument to
        ira_setup_eliminable_regset.
        * loop-invariant.c (calculate_loop_reg_pressure): Pass new
        argument to ira_setup_eliminable_regset.
        * lra.h: New.
        * lra-int.h: Ditto.
        * lra.c: Ditto.
        * lra-assigns.c: Ditto.
        * lra-constraints.c: Ditto.
        * lra-coalesce.c: Ditto.
        * lra-eliminations.c: Ditto.
        * lra-lives.c: Ditto.
        * lra-spills.c: Ditto.
        * Makefile.in (LRA_INT_H): New.
        (OBJS): Add lra.o, lra-assigns.o, lra-coalesce.o, lra-constraints.o,
        lra-eliminations.o, lra-lives.o, and lra-spills.o.
        (dwarf2out.o): Add dependence on ira.h and lra.h.
        (ira.o): Add dependence on lra.h.
        (lra.o, lra-assigns.o, lra-coalesce.o, lra-constraints.o): New entries.
        (lra-eliminations.o, lra-lives.o, lra-spills.o): Ditto.
        * output.h (alter_subreg): Add new argument.
        * rtlanal.c (simplify_subreg_regno): Permit mode changes for LRA.
        Permit ARG_POINTER_REGNUM and STACK_POINTER_REGNUM for LRA.
        * recog.c (general_operand, register_operand): Accept paradoxical
        FLOAT_MODE subregs for LRA.
        (scratch_operand): Accept pseudos for LRA.
        * rtl.h (lra_in_progress): New external.
        (debug_bb_n_slim, debug_bb_slim, print_value_slim): New prototypes.
        (debug_rtl_slim, debug_insn_slim): Ditto.
        * sdbout.c (sdbout_symbol): Pass new argument to alter_subreg.
        * sched-vis.c (print_value_slim): New.
        * target.def (lra_p): New hook.
        (register_priority): Ditto.
        (different_addr_displacement_p): Ditto.
        (spill_class): Ditto.
        * target-globals.h (this_target_lra_int): New external.
        (target_globals): New member lra_int.
        (restore_target_globals): Restore this_target_lra_int.
        * target-globals.c: Include lra-int.h.
        (default_target_globals): Add &default_target_lra_int.
        * targhooks.c (default_lra_p): New function.
        (default_register_priority): Ditto.
        (default_different_addr_displacement_p): Ditto.
        * targhooks.h (default_lra_p): Declare.
        (default_register_priority): Ditto.
        (default_different_addr_displacement_p): Ditto.
        * timevar.def (TV_LRA, TV_LRA_ELIMINATE, TV_LRA_INHERITANCE): New.
        (TV_LRA_CREATE_LIVE_RANGES, TV_LRA_ASSIGN, TV_LRA_COALESCE): New.
        * config/arm/arm.c (load_multiple_sequence): Pass new argument to
        alter_subreg.
        (store_multiple_sequence): Ditto.
        * config/i386/i386.h (enum ix86_tune_indices): Add
        X86_TUNE_GENERAL_REGS_SSE_SPILL.
        (TARGET_GENERAL_REGS_SSE_SPILL): New macro.
        * config/i386/i386.c (initial_ix86_tune_features): Set up
        X86_TUNE_GENERAL_REGS_SSE_SPILL for m_COREI7 and m_CORE2I7.
        (ix86_lra_p, ix86_register_priority): New functions.
        (ix86_secondary_reload): Add NON_Q_REGS, SIREG, DIREG.
        (inline_secondary_memory_needed): Change assert.
        (ix86_spill_class): New function.
        (TARGET_LRA_P, TARGET_REGISTER_BANK, TARGET_SPILL_CLASS): New macros.
        * config/m68k/m68k.c (emit_move_sequence): Pass new argument to
        alter_subreg.
        * config/m32r/m32r.c (gen_split_move_double): Ditto.
        * config/pa/pa.c (pa_emit_move_sequence): Ditto.
        * config/sh/sh.md: Ditto.
        * config/v850/v850.c (v850_reorg): Ditto.
        * config/xtensa/xtensa.c (fixup_subreg_mem): Ditto.
        * doc/md.texi: Add new interpretation of hint * for LRA.
        * doc/passes.texi: Describe LRA pass.
        * doc/tm.texi.in: Add TARGET_LRA_P, TARGET_REGISTER_PRIORITY,
        TARGET_DIFFERENT_ADDR_DISPLACEMENT_P, and TARGET_SPILL_CLASS.
        * doc/tm.texi: Update.

2012-10-23  Jan Hubicka  <jh@suse.cz>

        * loop-unroll.c (decide_peel_simple): Simple peeling makes sense even
        with simple loops; bound number of branches only when FDO is not
        available.
        (decide_unroll_stupid): Mention that num_loop_branches heuristics
        is off.

2012-10-23  Nick Clifton  <nickc@redhat.com>

        PR target/54660
        * config/iq2000/iq2000.c (iq2000_function_arg_advance): Suppress
        compile time warning about pointer printing.

2012-10-23  Joseph Myers  <joseph@codesourcery.com>

        * config.gcc (*-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu |
        *-*-knetbsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu): Use
        glibc-c.o in c_target_objs and cxx_target_objs.  Use t-glibc in
        tmake_file.  Set target_has_targetcm.
        (tilegx-*-linux*, tilepro-*-linux*): Append to c_target_objs and
        cxx_target_objs rather than overriding previous value.
        * config/glibc-c.c, config/t-glibc: New.
        * doc/tm.texi.in (TARGET_C_PREINCLUDE): New @hook.
        * doc/tm.texi: Regenerate.
        * hooks.c (hook_constcharptr_void_null): New.
        * hooks.h (hook_constcharptr_void_null): Declare.

2012-10-23  Eric Botcazou  <ebotcazou@adacore.com>

        * config/mips/linux-common.h (STACK_CHECK_STATIC_BUILTIN): Define.
        (STACK_CHECK_PROTECT): Likewise.
        * config/mips/mips.h (MIPS_PROLOGUE_TEMP2_REGNUM): Likewise.
        (MIPS_PROLOGUE_TEMP2): Likewise.
        * config/mips/mips-protos.h (mips_output_probe_stack_range): Declare.
        * config/mips/mips.c: Include common/common-target.h.
        (mips_emit_probe_stack_range): New function.
        (mips_output_probe_stack_range): Likewise.
        (mips_expand_prologue): Invoke mips_emit_probe_stack_range if static
        builtin stack checking is enabled.
        * config/mips/mips.md (UNSPEC_PROBE_STACK_RANGE): New constant.
        (probe_stack_range_<P:mode>): New insn.

2012-10-23  Marc Glisse  <marc.glisse@inria.fr>

        * tree-ssa-forwprop.c (forward_propagate_into_cond): Handle vectors.
        * fold-const.c (fold_relational_const): Handle VECTOR_CST.
        * doc/generic.texi (VEC_COND_EXPR): Document current policy.

2012-10-23  Jan Hubicka  <jh@suse.cz>

        PR middle-end/54937
        * tree-ssa-loop-niter.c (record_estimate): Do not try to lower
        the bound of non-is_exit statements.
        (maybe_lower_iteration_bound): Do it here.
        (estimate_numbers_of_iterations_loop): Call it.

2012-10-23  Jan Hubicka  <jh@suse.cz>

        PR middle-end/54967
        * cfgloopmanip.c (fix_bb_placements): Add loop_closed_ssa_invalidated;
        track basic blocks that moved out of their loops.
        (unloop): Likewise.
        (remove_path): Update.
        (fix_loop_placements): Update.
        * tree-ssa-loop-ivcanon.c (try_unroll_loop_completely): Add
        loop_closed_ssa_invalidated parameter; pass it around.
        (canonicalize_loop_induction_variables): Update loop closed
        SSA form if needed.
        (tree_unroll_loops_completely): Likewise; do irred update out of
        the outer loop; verify that SSA form is closed.
        * cfgloop.h (unrloop): Update.

2012-10-23  Terry Guo  <terry.guo@arm.com>

        PR target/55019
        * config/arm/arm.c (thumb1_expand_prologue): Don't push high regs with
        live argument regs.

2012-10-23  Hans-Peter Nilsson  <hp@bitrange.com>

        PR middle-end/55030
        Revert:
        * stmt.c (expand_nl_goto_receiver): Remove almost-copy of
        expand_builtin_setjmp_receiver.
        (expand_label): Adjust, call expand_builtin_setjmp_receiver
        with NULL for the label parameter.
        * builtins.c (expand_builtin_setjmp_receiver): Don't clobber
        the frame-pointer.  Adjust comments.
        [HAVE_builtin_setjmp_receiver]: Emit builtin_setjmp_receiver
        only if LABEL is non-NULL.

2012-10-22  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

        PR tree-optimization/55008
        * gimple-ssa-strength-reduction.c (find_basis_for_candidate):
        Don't allow a candidate to be a basis for itself under another
        interpretation.

2012-10-22  Sharad Singhai  <singhai@google.com>

        * dumpfile.c (dump_phase_enabled_p): Renamed dump_enabled_p. Update
        all callers.
        (dump_enabled_p): A new function to check if any of the dump files
        is available.
        (dump_kind_p): Remove check for current_function_decl. Add check for
        dumpfile and alt_dump_file.
        * dumpfile.h: Add declaration of dump_enabled_p.

2012-10-22  Richard Biener  <rguenther@suse.de>

        PR lto/55021
        * tree-streamer-in.c (unpack_ts_int_cst_value_fields): Remove
        bogus truncations.

2012-10-22  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (memory_address_length): Assert that non-null
        base or index RTXes are registers.  Do not check for REG RTXes.
        Determine addr32 prefix using SImode_address_operand or
        from original base and index RTXes.  Simplify code.

2012-10-22  Richard Biener  <rguenther@suse.de>

        PR tree-optimization/55011
        * tree-vrp.c (update_value_range): For invalid lattice transitions
        drop to VARYING.

2012-10-22  Julian Brown  <julian@codesourcery.com>

        * config/arm/arm.h (CANNOT_CHANGE_MODE_CLASS): Avoid subreg'ing
        VFP D registers in big-endian mode.

2012-10-22  Georg-Johann Lay  <avr@gjlay.de>

        * doc/invoke.texi (AVR Options): Document __AVR_ARCH__.
        Note __AVR_<device>__ is not defined for cores.
        Don't point to --help=target.

2012-10-22  Sameera Deshpande  <sameera.deshpande@arm.com>
            Greta Yorsh  <Greta.Yorsh@arm.com>

        * config/arm/arm.c (thumb2_emit_ldrd_pop): New function.
        (arm_expand_epilogue): Use the new function.

2012-10-22  Sameera Deshpande  <sameera.deshpande@arm.com>
            Greta Yorsh  <Greta.Yorsh@arm.com>

        * config/arm/arm.c (thumb2_emit_strd_push): New function.
        (arm_expand_prologue): Use the new function.

2012-10-22  Sameera Deshpande  <sameera.deshpande@arm.com>
            Greta Yorsh  <Greta.Yorsh@arm.com>

        * config/arm/arm-protos.h (offset_ok_for_ldrd_strd): New declaration.
        (operands_ok_ldrd_strd): Likewise.
        * config/arm/arm.c (offset_ok_for_ldrd_strd): New function.
        (operands_ok_ldrd_strd): Likewise.
        * config/arm/arm.md (thumb2_ldrd, thumb2_ldrd_base): New patterns.
        (thumb2_ldrd_base_neg): Likewise.
        (thumb2_strd, thumb2_strd_base, thumb_strd_base_neg): Likewise.
        * predicates.md (ldrd_strd_offset_operand): New predicate.
        * config/arm/constraints.md (Do): New constraint.

2012-10-22  Hans-Peter Nilsson  <hp@bitrange.com>

        * config/mmix/mmix.md ("nonlocal_goto_receiver"): Refer to the
        frame-pointer as an operand.
        ("*nonlocal_goto_receiver_expanded"): Ditto.  Use
        mmix_output_register_setting instead of naked output_asm_insn for
        the offset from the frame-pointer to the saved rO.
        * config/mmix/mmix.c (mmix_output_register_setting): Emit NEGU for
        values -255..0.
        * config/mmix/predicates.md ("frame_pointer_operand"): New.
        * config/mmix/constraints.md ("Yf"): New.

        * stmt.c (expand_nl_goto_receiver): Remove almost-copy of
        expand_builtin_setjmp_receiver.
        (expand_label): Adjust, call expand_builtin_setjmp_receiver
        with NULL for the label parameter.
        * builtins.c (expand_builtin_setjmp_receiver): Don't clobber
        the frame-pointer.  Adjust comments.
        [HAVE_builtin_setjmp_receiver]: Emit builtin_setjmp_receiver
        only if LABEL is non-NULL.

2012-10-21  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386-protos.h (memory_address_length): Add new bool
        argument.  Update all uses.
        * config/i386/i386.c (memory_address_length): If not LEA insn, then
        add length of addr32 prefix based on mode of base or index register.
        (ix86_attr_length_address_default) <TYPE_LEA>: Do not handle SImode
        addresses here.  Update call to memory_address_length.
        (ix86_print_address_operand): Use SImode_address_operand predicate.
        * config/i386/predicates.md (SImode_address_operand): New.
        * config/i386/i386.md (lea<mode>): Use SImode_address_operand
        to calculate "mode" attribute.  Use SImode_address_operand predicate
        instead of open-coding accepted RTX codes.

2012-10-21  Joern Rennecke  <joern.rennecke@embecosm.com>

        * rtl.def (ADDR_DIFF_VEC): Fix comment typo.

2012-10-21  Eric Botcazou  <ebotcazou@adacore.com>

        PR rtl-optimization/44194
        * calls.c (expand_call): Allow sibling calls in the PARALLEL case.

2012-10-21  Tobias Burnus  <burnus@net-b.de>

        PR fortran/54725
        * Makefile.in (TARGET_SYSTEM_ROOT_DEFINE): New.

2012-10-21  Chung-Lin Tang  <cltang@codesourcery.com>

        * config/xtensa/xtensa.c (xtensa_expand_builtin): Remove unused 'arg'
        variable.

2012-10-20  Eric Botcazou  <ebotcazou@adacore.com>

        PR rtl-optimization/54315
        * calls.c (expand_call): Don't deal specifically with BLKmode values
        returned in naked registers.
        * expr.h (copy_blkmode_from_reg): Adjust prototype.
        * expr.c (copy_blkmode_from_reg): Rename first parameter into
        TARGET and make it required.  Assert that SRCREG hasn't BLKmode.
        Add a couple of short-circuits for common cases and be prepared
        for sub-word registers.
        (expand_assignment): Call copy_blkmode_from_reg for BLKmode values
        returned in naked registers.
        (store_expr): Likewise.
        (store_field): Likewise.

2012-10-20  Jan Hubicka  <jh@suse.cz>

        * loop-unroll.c (decide_unroll_constant_iterations): Don't
        perform unrolling for loops with low iterations bounds or estimates.

2012-10-20  Jan Hubicka  <jh@suse.cz>

        * loop-iv.c (iv_number_of_iterations): Record the upper bound
        only if there are no further conditions on it.

2012-10-20  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR c/53063
        PR c/40989
        * opts.c (finish_options): Remove explicit handling from here.

2012-10-20  Joern Rennecke  <joern.rennecke@embecosm.com>
            Richard Sandiford  <rdsandiford@googlemail.com>

        * emit-rtl.c (copy_delay_slot_insn): New function.
        * emit-rtl.h (copy_delay_slot_insn): Declare.
        * reorg.c: Include "emit-rtl.h".
        (steal_delay_list_from_target): Use copy_delay_slot_insn.
        (fill_slots_from_thread, fill_simple_delay_slots): Likewise.

        * final.c (shorten_branches): When optimizing, start with small
        length and increase from there, and don't decrease lengths.

2012-10-19  Jan Hubicka  <jh@suse.cz>

        * builtins.def (BUILT_IN_UNREACHABLE): Make
        ATTR_CONST_NORETURN_NOTHROW_LEAF_LIST.
        * builtin-attrs.def (ATTR_CONST_NORETURN_NOTHROW_LEAF_LIST): Define.

2012-10-19  Michael Meissner  <meissner@linux.vnet.ibm.com>
            Dominique Dhumieres  <dominiq@lps.ens.fr>

        * config/rs6000/rs6000-cpus.def (POWERPC_MASKS): Don't assume
        OPTION_MASK_STRICT_ALIGN is defined.
        (MASK_STRICT_ALIGN): If OPTION_MASK_STRICT_ALIGN is not defined,
        define this to 0 for the 3 ports that use it.

        * config/rs6000/rs6000.c (OPTION_MASK_STRICT_ALIGN): Don't do
        check for ports not having -mstrict-align here, move test to
        rs6000-cpus.def.
        (MASK_STRICT_ALIGN): Likewise.
        (rs6000_debug_reg_global): Print out correct target flag words if
        -mdebug=reg.

2012-10-19  Marek Polacek  <polacek@redhat.com>

        PR middle-end/54945
        * fold-const.c (fold_sign_changed_comparison):  Punt if folding
        pointer/non-pointer comparison.

2012-10-19  Greta Yorsh  <Greta.Yorsh@arm.com>

        * doc/sourcebuild.texi (Effective-Target Keywords): Document
        new effective target keyword arm_prefer_ldrd_strd.

2012-10-19  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/54981
        * tree-loop-distribution.c (ssa_name_has_uses_outside_loop_p):
        Do not consider debug stmts as uses.

2012-10-19  Richard Biener  <rguenther@suse.de>

        PR tree-optimization/54976
        * tree-vect-stmts.c (get_vectype_for_scalar_type_and_size):
        Robustify against odd inner_mode inputs.

2012-10-19  Zhenqiang Chen <zhenqiang.chen@linaro.org>

        PR target/54892
        * config/arm/arm.c (arm_expand_compare_and_swap): Use SImode to make
        sure the mode is correct when falling through from above cases.

2012-10-19  Bin Cheng  <bin.cheng@arm.com>

        * common.opt (flag_ira_hoist_pressure): New.
        * doc/invoke.texi (-fira-hoist-pressure): Describe.
        * ira-costs.c (ira_set_pseudo_classes): New parameter.
        * ira.h: Update copyright dates.
        (ira_set_pseudo_classes): Update prototype.
        * haifa-sched.c (sched_init): Update call.
        * ira.c (ira): Update call.
        * regmove.c: Update copyright dates.
        (regmove_optimize): Update call.
        * loop-invariant.c: Update copyright dates.
        (move_loop_invariants): Update call.
        * gcse.c: (struct bb_data): New structure.
        (BB_DATA): New macro.
        (curr_bb, curr_reg_pressure): New static variables.
        (should_hoist_expr_to_dom): Rename from hoist_expr_reaches_here_p.
        Change parameter expr_index to expr.
        New parameters pressure_class, nregs and hoisted_bbs.
        Use reg pressure to determine the distance expr can be hoisted.
        (hoist_code): Use reg pressure to direct the hoist process.
        (get_regno_pressure_class, get_pressure_class_and_nregs)
        (change_pressure, calculate_bb_reg_pressure): New.
        (one_code_hoisting_pass): Calculate register pressure. Allocate
        and free data.

2012-10-19  Bin Cheng  <bin.cheng@arm.com>

        * gcse.c: Update copyright dates.
        (hoist_expr_reaches_here_p): Change parameter type from char *
        to sbitmap.

2012-10-19  Sebastian Huber <sebastian.huber@embedded-brains.de>

        * config.gcc
        (arm*-*-eabi* | arm*-*-symbianelf* | arm*-*-rtemseabi*): Rename
        "arm*-*-rtemseabi*" to "arm*-*-rtems*".

2012-10-19  Alan Modra  <amodra@gmail.com>

        * configure.ac (HAVE_LD_NO_DOT_SYMS): Set if using gold.
        (HAVE_LD_LARGE_TOC): Likewise.
        * configure: Regenerate.

2012-10-19  Alan Modra  <amodra@gmail.com>

        * config/rs6000/predicates.md (splat_input_operand): Don't call
        input_operand for MEMs.  Instead check for volatile and call
        memory_address_addr_space_p with modified mode.

2012-10-18  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (rdpmc): Remove expander.
        (rdtsc): Ditto.
        (rdtscp): Ditto.
        (rdpmc): Rename from *rdpmc.
        (rdpmc_rex64): Rename from *rdpmc_rex64.
        (rdtsc): Rename from *rdtsc.
        (rdtsc_rex64): Rename from *rdtsc_rex64.
        (rdtscp): Rename from *rdtscp.
        (rdtscp_rex64): Rename from *rdtscp_rex64.

        * config/i386/i386.c (struct builtin_description bdesc_special_args)
        <IX86_BUILTIN_RDTSC>: Use CODE_FOR_NOTHING.
        <IX86_BUILTIN_RDTSCP>: Ditto.
        (struct builtin_description bdesc__args) <IX86_BUILTIN_RDPMC>: Ditto.
        (ix86_expand_builtin) <IX86_BUILTIN_{RDPMC,RDTSC,RDTSCP}>: Handle here.

2012-10-18  Jan-Benedict Glaw  <jbglaw@lug-owl.de>

        * config/sh/sh.c: Fix comment to silence warning.

2012-10-18  Matthew Gretton-Dann  <matthew.gretton-dann@arm.com>
            Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>
            Sameera Deshpande  <sameera.deshpande@arm.com>

        * config/arm/cortex-a15-neon.md: New file.
        * config/arm/cortex-a15.md (cortex_a15_call): Adjust reservation.
        (cortex_a15_load1): Likewise.
        (cortex_a15_load3): Likewise.
        (cortex_a15_store1): Likewise.
        (cortex_a15_store3): Likewise.
        (cortex-a15-neon.md): Include.

2012-10-18  Segher Boessenkool  <segher@kernel.crashing.org>

        * config/rs6000/altivec.md (altivec_lvsl, altivec_lvsr): Add mode.
        (altivec_vsumsws_nomode): Delete.
        (reduc_splus_<mode>, reduc_uplus_<mode>): Call gen_altivec_vsumsws
        instead of gen_altivec_vsumsws_nomode.
        (altivec_lvlx, altivec_lvlxl, altivec_lvrx, altivec_lvrxl): Add mode.
        * config/rs6000/rs6000.md (probe_stack): Rename to...
        (probe_stack_<mode>): ... this.  Add mode.  Change pattern to
        use std instead of stw when appropriate.
        (probe_stack): New expander.
        (move_from_CR_ov_bit): Add mode.
        (splitter for compare_plus_ne0_<mode>, splitter for
        compare_plus_ne0_<mode>_1): Remove constraints.
        * config/rs6000/sync.md (loadsync): Rename to...
        (loadsync_<mode>): ... this.  Add mode.
        (atomic_load<mode>): Adjust.

2012-10-18  Eric Botcazou  <ebotcazou@adacore.com>

        * loop-invariant.c: Include target.h.
        (check_dependency): Return false for an uninitialized argument register
        that is likely to be spilled.
        * Makefile.in (loop-invariant.o): Add $(TARGET_H).

2012-10-18  Eric Botcazou  <ebotcazou@adacore.com>

        * except.c (sjlj_emit_function_enter): Remove unused variable.

2012-10-18  Matthew Gretton-Dann  <matthew.gretton-dann@arm.com>
            Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

        * config/arm/arm.c (neon_builtin_data): Add vfma and vfms builtins.
        * config/arm/neon-docgen.ml (intrinsic_groups): Add
        fused-multiply-* groups.
        * config/neon-gen.ml (print_feature_test_start): New function.
        (print_feature_test_end): Likewise.
        (print_variant): Print feature test macros.
        * config/arm/neon-testgen.ml (emit_prologue): Allow different
        tests to require different effective targets.
        (effective_target): New function.
        (test_intrinsic): Specify correct effective targets.
        * config/arm/neon.md (fma<VCVTF:mode>4_intrinsic): New pattern.
        (fmsub<VCVTF:mode>4_intrinsic): Likewise.
        (neon_vfma<VCVFT:mode>): New expand.
        (neon_vfms<VCVFT:mode>): Likewise.
        * config/neon.ml (opcode): Add Vfma and Vfms.
        (features): Add Requires_feature.
        (ops): Add VFMA and VFMS intrinsics.
        * config/arm/arm_neon.h: Regenerate.
        * doc/arm-neon-intrinsics.texi: Likewise.

2012-10-18  Richard Guenther  <rguenther@suse.de>

        * lto-streamer.h (enum LTO_tags): Add LTO_integer_cst.
        * lto-streamer-in.c (lto_input_tree): Use it.
        * lto-streamer-out.c (lto_output_tree): Likewise, for
        !TREE_OVERFLOW integer constants only.
        * tree-streamer-in.c (unpack_ts_int_cst_value_fields): New function.
        (unpack_value_fields): Call it.
        (streamer_read_integer_cst): Simplify.
        * tree-streamer-out.c (pack_ts_int_cst_value_fields): New function.
        (streamer_pack_tree_bitfields): Call it.
        (streamer_write_integer_cst): Adjust.

2012-10-18  Matthew Gretton-Dann  <matthew.gretton-dann@arm.com>
            Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

        * config.gcc: Add support for ARMv8 for arm*-*-* targets.
        * config/arm/arm-arches.def: Add armv8-a
        * config/arm/arm-fpus.def: Add fp-armv8, neon-fp-armv8,
        crypto-neon-fp-armv8.  Add crypto field.
        * config/arm/arm-tables.opt: Regenerate.
        * config/arm/arm.c (FL_FOR_ARCH8A): Likewise.
        (arm_arch8): New global variable.
        (ARM_FPU): Add crypto parameter.
        (arm_option_override): Set arm_arch8, update comments.
        * config/arm/arm.h (TARGET_CRYPTO): New macro.
        (arm_fpu_desc): Add crypto field.
        (base_architecture): Add ARMv8 entry.
        (arm_arch8): New variable declaration.
        * config/arm/bpabi.h: ARMv8 supports BE8.
        * doc/invoke.texi: Document ARMv8 options.

2012-10-17  Aldy Hernandez  <aldyh@redhat.com>

        PR middle-end/54893
        * trans-mem.c (diagnose_tm_1_op): Allow volatiles inside relaxed
        transactions.

2012-10-17  Aldy Hernandez  <aldyh@redhat.com>

        PR rtl-optimization/54900
        * ifcvt.c (noce_can_store_speculate_p): Call
        memory_must_be_modified_in_insn_p.
        * alias.c (memory_must_be_modified_in_insn_p): New.
        (set_dest_equal_p): New.
        * rtl.h (memory_must_be_modified_in_p): Protoize.

2012-10-17  Michael Meissner  <meissner@linux.vnet.ibm.com>

        * config/rs6000/rs6000.opt (rs6000_isa_flags): New flag word to
        replace target_flags that gives us 63 possible switches.
        (x_rs6000_isa_flags): Save area for rs6000_isa_flags.
        (x_rs6000_isa_flags_explicit): Save area for rs6000_isa_flags_explicit.
        (rs6000_target_flags_explicit): Delete in favor of
        x_rs6000_isa_flags_explicit.
        (-mpowerpc64): Change all switches that used to be in target_flags
        to now be in rs6000_isa_flags.  In using rs6000_isa_flags, the
        options machinary will generate names of the form OPITON_<xxx>
        instead of TARGET_<xxx> and OPTION_MASK_<xxx> instead of MASK_<xxx>.
        (-mpowerpc-gpopt): Likewise.
        (-mpowerpc-gfxopt): Likewise.
        (-mmfcrf): Likewise.
        (-mpopcntb): Likewise.
        (-mfprnd): Likewise.
        (-mcmpb): Likewise.
        (-mmfpgpr): Likewise.
        (-maltivec): Likewise.
        (-mhard-dfp): Likewise.
        (-mmulhw): Likewise.
        (-mdlmzb): Likewise.
        (-mmultiple): Likewise.
        (-mstring): Likewise.
        (-msoft-float): Likewise.
        (-mhard-float): Likewise.
        (-mpopcntd): Likewise.
        (-mvsx): Likewise.
        (-mno-update): Likewise.
        (-mupdate): Likewise.
        (-mrecip-precision): Likewise.
        (-mminimal-toc): Likewise.
        (-misel): Likewise.
        * config/rs6000/aix64.opt (-maix64): Likewise.
        (-maix32): Likewise.
        * config/rs6000/sysv4.opt (-mstrict-align): Likewise.
        (-mrelocatable): Likewise.
        (-mlittle-endian): Likewise.
        (-mlittle): Likewise.
        (-mbig-endian): LIkewise.
        (-mbig): Likewise.
        (-meabi): Likewise.
        (-m64): Likewise.
        (-m32): Likewise.
        * config/rs6000/darwin.opt (-m64): Likewise.
        (-m32): Likewise.

        * config/rs6000/rs6000-cpus.def (ISA_2_1_MASKS): Move the various
        masks used in rs6000.c here, since they are more logically in this
        file.  Convert from being enums to just #defines, since the types
        of these masks is now HOST_WIDE_INT instead of int.  For
        POWERPC_MASKS, add MASK_SOFT_FLOAT, since the only use case or'ed
        in the mask.  Change the use in rs6000.c not to do the OR of
        MASK_SOFT_FLOAT.
        (ISA_2_1_MASKS): Likewise.
        (ISA_2_2_MASKS): Likewise.
        (ISA_2_4_MASKS): Likewise.
        (ISA_2_5_MASKS_EMBEDDED): Likewise.
        (ISA_2_5_MASKS_SERVER): Likewise.
        (POWERPC_7400_MASK): Likewise.
        (POWERPC_MASKS): Likewise.
        * config/rs6000/rs6000.c (ISA_2_1_MASKS): Likewise.
        (ISA_2_1_MASKS): Likewise.
        (ISA_2_2_MASKS): Likewise.
        (ISA_2_4_MASKS): Likewise.
        (ISA_2_5_MASKS_EMBEDDED): Likewise.
        (ISA_2_5_MASKS_SERVER): Likewise.
        (POWERPC_7400_MASK): Likewise.
        (POWERPC_MASKS): Likewise.
        (rs6000_option_override_internal): Likewise.

        * config/rs6000/rs6000.c (darwin_rs6000_override_options): Change
        all uses of target_flags to rs6000_isa_flags.  Change all uses of
        target_flags_explicit to rs6000_isa_flags_explicit.  Change the
        use of MASK_<xxx> to OPTION_MASK_<xxx> that options.h defines when
        we use a secondary flags word.  Save/restore/print the new flags
        word when switching contexts with different target attributes.
        (rs6000_option_override_internal): Likewise.
        (rs6000_darwin_file_start): Likewise.
        (rs6000_opt_masks): Likewise.
        (rs6000_inner_target_options): Likewise.
        (rs6000_pragma_target_parse): Likewise.
        (rs6000_set_current_function): Likewise.
        (rs6000_function_specific_save): Likewise.
        (rs6000_function_specific_restore): Likewise.
        (rs6000_function_specific_print): Likewise.
        (rs6000_can_inline_p): Likewise.
        * config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Likewise.
        (rs6000_cpu_cpp_builtins): Likewise.
        * common/config/rs6000/rs6000-driver.c (rs6000_handle_option):
        Likewise.

        * config/rs6000/rs6000.h (MASK_ALTIVEC): In moving to using
        Var(...) for all of the isa switches, the options machinery now
        uses OPTION_MASK_<xxx> instead of MASK_<xxx> for the mask name.
        Use #define to map the old name into the new name.  For switches
        that are defined in aix64.opt, sysv4.opt, and darwin.opt, only do
        the definition if those switches were defined.
        (MASK_ALTIVEC): Likewise.
        (MASK_CMPB): Likewise.
        (MASK_DFP): Likewise.
        (MASK_DLMZB): Likewise.
        (MASK_EABI): Likewise.
        (MASK_FPRND): Likewise.
        (MASK_HARD_FLOAT): Likewise.
        (MASK_ISEL): Likewise.
        (MASK_MFCRF): Likewise.
        (MASK_MFPGPR): Likewise.
        (MASK_MULHW): Likewise.
        (MASK_MULTIPLE): Likewise.
        (MASK_NO_UPDATE): Likewise.
        (MASK_POPCNTB): Likewise.
        (MASK_POPCNTD): Likewise.
        (MASK_PPC_GFXOPT): Likewise.
        (MASK_PPC_GPOPT): Likewise.
        (MASK_RECIP_PRECISION): Likewise.
        (MASK_SOFT_FLOAT): Likewise.
        (MASK_STRICT_ALIGN): Likewise.
        (MASK_STRING): Likewise.
        (MASK_UPDATE): Likewise.
        (MASK_VSX): Likewise.
        (MASK_POWERPC64): Likewise.
        (MASK_64BIT): Likewise.
        (MASK_RELOCATABLE): Likewise.
        (MASK_LITTLE_ENDIAN): Likewise.
        (MASK_MINIMAL_TOC): Likewise.
        (MASK_REGNAMES): Likewise.
        (MASK_PROTOTYPE): Likewise.
        (rs6000_isa_flags_explicit): Define in terms of the
        global_options_set structure.

        * config/rs6000/aix43.h (SUBTARGET_OVERRIDE_OPTIONS):
        Change use of target_flags to rs6000_isa_flags, target_flags_explicit
        to rs6000_isa_flags_explicit, and MASK_<xxx> to OPTION_MASK_<xxx>.
        * config/rs6000/aix51.h (SUBTARGET_OVERRIDE_OPTIONS): Likewise.
        * config/rs6000/aix52.h (SUBTARGET_OVERRIDE_OPTIONS): Likewise.
        * config/rs6000/aix53.h (SUBTARGET_OVERRIDE_OPTIONS): Likewise.
        * config/rs6000/aix61.h (SUBTARGET_OVERRIDE_OPTIONS): Likewise.
        * config/rs6000/freebsd64.h (RELOCATABLE_NEEDS_FIXUP): Likewise.
        (SUBSUBTARGET_OVERRIDE_OPTIONS): Likewise.
        * config/rs6000/freebsd.h (RELOCATABLE_NEEDS_FIXUP): Likewise.
        * config/rs6000/linux64.h (RELOCATABLE_NEEDS_FIXUP): Likewise.
        (SUBSUBTARGET_OVERRIDE_OPTIONS): Likewise.
        (OPTION_LITTLE_ENDIAN): Likewise.
        (OPTION_RELOCATABLE): Likewise.
        (OPTION_EABI): Likewise.
        (OPTION_PROTOTYPE): Likewise.
        * config/rs6000/linux.h (RELOCATABLE_NEEDS_FIXUP): Likewise.
        * config/rs6000/option-defaults.h (OPTION_MASK_64BIT): Likewise.
        (OPT_ARCH32): Likewise.
        (OPT_ARCH64): Likewise.
        * config/rs6000/sysv4.h (TARGET_TOC): Likewise.
        (SUBTARGET_OVERRIDE_OPTIONS): Likewise.
        (SUBSUBTARGET_OVERRIDE_OPTIONS): Likewise.
        (TARGET_OS_SYSV_CPP_BUILTINS): Likewise.

        * config/rs6000/t-rs6000 (rs6000.o): Add rs6000-cpus.def as a
        dependency.

2012-10-17  Jan Hubicka  <jh@suse.cz>

        * cfgloopmanip.c (copy_loop_info): New function.
        (duplicate_loop): Use it.
        (loop_version): Use it.
        * loop-unswitch.c (unswitch_loop): Use it.
        * cfgloop.h (copy_loop_info): Declare.

2012-10-17  Jan Hubicka  <jh@suse.cz>

        * tree-ssa-loop-ivcanon.c (tree_estimate_loop_size): Add edge_to_cancel
        parameter and use it to estimate code optimized out in the final
        iteration.
        (loop_edge_to_cancel): New function.
        (try_unroll_loop_completely): New IRRED_IVALIDATED parameter;
        handle unrolling loops with bounds given via max_loop_iteratins;
        handle unrolling non-inner loops when code size shrinks;
        tidy dump output; when the last iteration loop still stays
        as loop in the CFG forcongly redirect the latch to
        __builtin_unreachable.
        (canonicalize_loop_induction_variables): Add irred_invlaidated
        parameter; record niter bound derrived; dump
        max_loop_iterations bounds; call try_unroll_loop_completely
        even if no niter bound is given.
        (canonicalize_induction_variables): Handle irred_invalidated.
        (tree_unroll_loops_completely): Handle non-innermost loops;
        handle irred_invalidated.
        * cfgloop.h (unlop): Declare.
        * cfgloopmanip.c (unloop): Export.
        * tree.c (build_common_builtin_nodes): Build BULTIN_UNREACHABLE.

2012-10-17  Michael Meissner  <meissner@linux.vnet.ibm.com>

        * opth-gen.awk (TARGET_* generation): Always generate TARGET_<xxx>
        for Mask options, whether they use Var(...) or not.

        * config/linux-android.h (ANDROID_TARGET_OS_CPP_BUILTINS): Use
        TARGET_<xxx> instead of OPTION_<xxx>.
        * config/i386/i386.h (TARGET_64BIT): Likewise.
        (TARGET_MMX): Likewise.
        (TARGET_3DNOW): Likewise.
        (TARGET_3DNOW_A): Likewise.
        (TARGET_SSE): Likewise.
        (TARGET_SSE2): Likewise.
        (TARGET_SSE3): Likewise.
        (TARGET_SSSE3): Likewise.
        (TARGET_SSE4_1): Likewise.
        (TARGET_SSE4_2): Likewise.
        (TARGET_AVX): Likewise.
        (TARGET_AVX2): Likewise.
        (TARGET_FMA): Likewise.
        (TARGET_SSE4A): Likewise.
        (TARGET_FMA4): Likewise.
        (TARGET_XOP): Likewise.
        (TARGET_LWP): Likewise.
        (TARGET_ROUND): Likewise.
        (TARGET_ABM): Likewise.
        (TARGET_BMI): Likewise.
        (TARGET_BMI2): Likewise.
        (TARGET_LZCNT): Likewise.
        (TARGET_TBM): Likewise.
        (TARGET_POPCNT): Likewise.
        (TARGET_SAHF): Likewise.
        (TARGET_MOVBE): Likewise.
        (TARGET_CRC32): Likewise.
        (TARGET_AES): Likewise.
        (TARGET_PCLMUL): Likewise.
        (TARGET_CMPXCHG16B): Likewise.
        (TARGET_FSGSBASE): Likewise.
        (TARGET_RDRND): Likewise.
        (TARGET_F16C): Likewise.
        (TARGET_RTM): Likewise.
        (TARGET_HLE): Likewise.
        (TARGET_RDSEED): Likewise.
        (TARGET_PRFCHW): Likewise.
        (TARGET_ADX): Likewise.
        (TARGET_64BIT): Likewise.
        (TARGET_MMX): Likewise.
        (TARGET_3DNOW): Likewise.
        (TARGET_3DNOW_A): Likewise.
        (TARGET_SSE): Likewise.
        (TARGET_SSE2): Likewise.
        (TARGET_SSE3): Likewise.
        (TARGET_SSSE3): Likewise.
        (TARGET_SSE4_1): Likewise.
        (TARGET_SSE4_2): Likewise.
        (TARGET_AVX): Likewise.
        (TARGET_AVX2): Likewise.
        (TARGET_FMA): Likewise.
        (TARGET_SSE4A): Likewise.
        (TARGET_FMA4): Likewise.
        (TARGET_XOP): Likewise.
        (TARGET_LWP): Likewise.
        (TARGET_ROUND): Likewise.
        (TARGET_ABM): Likewise.
        (TARGET_BMI): Likewise.
        (TARGET_BMI2): Likewise.
        (TARGET_LZCNT): Likewise.
        (TARGET_TBM): Likewise.
        (TARGET_POPCNT): Likewise.
        (TARGET_SAHF): Likewise.
        (TARGET_MOVBE): Likewise.
        (TARGET_CRC32): Likewise.
        (TARGET_AES): Likewise.
        (TARGET_PCLMUL): Likewise.
        (TARGET_CMPXCHG16B): Likewise.
        (TARGET_FSGSBASE): Likewise.
        (TARGET_RDRND): Likewise.
        (TARGET_F16C): Likewise.
        (TARGET_RTM): Likewise.
        (TARGET_HLE): Likewise.
        (TARGET_RDSEED): Likewise.
        (TARGET_PRFCHW): Likewise.
        (TARGET_ADX): Likewise.
        (TARGET_LP64): Likewise.
        (TARGET_X32): Likewise.
        (TARGET_ISA_ROUND): Likewise.
        * config/i386/darwin.h (TARGET_64BIT): Likewise.

        * doc/options.texi (Mask): Update documentation to specify only
        TARGET_<xxx> is generated.

2012-10-17  Greta Yorsh  <Greta.Yorsh@arm.com>

        * config/arm/arm.md (UNSPEC_PROLOGUE_USE): Rename this...
        (UNSPEC_REGISTER_USE): ... to this.
        (prologue_use): Rename this...
          (force_register_use): ... to this and update output assembly.
        (epilogue) Rename gen_prologue_use to gen_force_register_use.
        * config/arm/arm.c (arm_expand_prologue): Likewise.
        (thumb1_expand_epilogue): Likewise.
        (arm_expand_epilogue): Likewise.
        (arm_expand_epilogue): Likewise.

2012-10-17  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr-arch.h (avr_extra_arch_macro): Remove prototype.
        * config/avr/avr.c (avr_extra_arch_macro): Remove variable.
        (avr_option_override): Remove setting of avr_extra_arch_macro.
        * config/avr/avr-c.c (avr_extra_arch_macro): Replace with
        avr_current_device->macro.

2012-10-17  Richard Biener  <rguenther@suse.de>

        * tree-streamer-out.c (write_ts_decl_common_tree_pointers):
        Do not write TREE_CHAIN of PARM_DECLs.
        (write_ts_decl_non_common_tree_pointers): Instead stream
        the DECL_ARGUMENTS chain.
        * tree-streamer-in.c (lto_input_ts_decl_common_tree_pointers):
        Do not read TREE_CHAIN of PARM_DECLs.
        (lto_input_ts_decl_non_common_tree_pointes): Instead read
        the DECL_ARGUMENTS as chain.

2012-10-17  Steven Bosscher  <steven@gcc.gnu.org>

        * config/iq2000/iq2000.h (call_used_regs): Remove definition.

2012-10-16  Eric Botcazou  <ebotcazou@adacore.com>

        PR rtl-optimization/54870
        * tree.h (TREE_ADDRESSABLE): Document special usage on SSA_NAME.
        * cfgexpand.c (update_alias_info_with_stack_vars ): Set it on the
        SSA_NAME pointer that points to a partition if there is at least
        one variable with it set in the partition.
        * dse.c (local_variable_can_escape): New predicate.
        (can_escape): Call it.
        * gimplify.c (mark_addressable): If this is a partitioned decl, also
        mark the SSA_NAME pointer that points to a partition.

2012-10-16  Steven Bosscher  <steven@gcc.gnu.org>

        * df-problems.c (df_kill_notes): Split up in two functions.
        (df_remove_dead_and_unused_notes): New function, first half of
        df_kill notes to remove all REG_DEAD and REG_UNUSED notes.
        (df_remove_dead_eq_notes): New function, second half of df_kill_notes
        to remove REG_EQUAL and REG_EQUIV notes referring to dead registers.
        (df_note_bb_compute): Call df_remove_dead_and_unused_notes instead
        of df_kill_notes.  Call df_remove_dead_eq_notes after processing insn.

        * web.c (web): Re-add DF_RD_PRUNE_DEAD_DEFS;

2012-10-16  Ian Lance Taylor  <iant@google.com>

        * doc/extend.texi (Return Address): Change
        __builtin_extract_return_address to
        __builtin_extract_return_addr.

2012-10-16  Steven Bosscher  <steven@gcc.gnu.org>

        * rtl.h (get_call_rtx_from): New prototype.
        * rtlanal.c (get_call_rtx_from): New function.
        * calls.c (emit_call_1): Use it.
        * dse.c (scan_insn): Likewise
        * dwarf2out.c (dwarf2out_var_location): Likewise.
        * sched-deps.c (call_may_noreturn_p): Likewise.
        * var-tracking.c (prepare_call_arguments): Likewise.
        * config/sh/sh.c (sh_adjust_cost): Likewise.

2012-10-16  Tom de Vries  <tom@codesourcery.com>

        * expr.c (move_by_pieces, move_by_pieces_ninsns, can_store_by_pieces)
        (store_by_pieces_1): Don't enter loop when no more data is left.

2012-10-16  Joern Rennecke  <joern.rennecke@embecosm.com>

        * loop-doloop.c (doloop_modify): Pass doloop_end pattern to
        gen_doloop_begin.
        (doloop_optimize): Pass flag to indicate if loop is entered at top
        to gen_doloop_end.
        * config/arm/thumb2.md (doloop_end): Accept extra operand.
        * config/bfin/bfin.md (doloop_end): Likewise.
        * config/c6x/c6x.md (doloop_end): Likewise.
        * config/ia64/ia64.md (doloop_end): Likewise.
        * config/mep/mep.md (doloop_begin, doloop_end): Likewise.
        * config/rs6000/rs6000.md (doloop_end): Likewise.
        * config/s390/s390.md (doloop_end): Likewise.
        * config/sh/sh.md (doloop_end): Likewise.
        * config/spu/spu.md (doloop_end): Likewise.
        * config/tilegx/tilegx.md (doloop_end): Likewise.
        * config/tilepro/tilepro.md (doloop_end): Likewise.
        * doc/md.texi (doloop_end): Document new operand.
        * basic-block.h (contains_no_active_insn_p): Declare.
        * cfgrtl.c (contains_no_active_insn_p): New function, factored
        out of ...
        (forwarder_block_p): ... here.

2012-10-16  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR c/53063
        PR c/40989
        * doc/options.texi (EnabledBy): Document new form.
        * optc-gen.awk: Handle new form of EnabledBy.
        * common.opt (Wunused-but-set-parameter): Use EnabledBy.
        (Wunused-parameter): Likewise.
        * opts.c (finish_options): Do not handle them explicitly.
        * opt-functions.awk (search_var_name): New.

2012-10-16  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR c/53063
        PR c/40989
        * optc-gen.awk: Handle new form of LangEnabledBy.
        * opts.c (set_Wstrict_aliasing): Declare here. Make static.
        * common.opt (Wstrict-aliasing=,Wstrict-overflow=): Do not use Init.
        * doc/options.texi (LangEnabledBy): Document new form.
        * flags.h (set_Wstrict_aliasing): Do not declare.

2012-10-16  Ulrich Weigand  <Ulrich.Weigand@de.ibm.com>

        * reload.c (find_reloads_subreg_address): Remove FORCE_REPLACE
        parameter.  Always replace normal subreg with memory reference
        whenever possible.  Return NULL otherwise.
        (find_reloads_toplev): Always call find_reloads_subreg_address
        for subregs of registers equivalent to a memory location.
        Only recurse further if find_reloads_subreg_address fails.
        (find_reloads_address_1): Only call find_reloads_subreg_address
        for subregs of registers equivalent to a memory location.
        Properly handle failure of find_reloads_subreg_address.

2012-10-16  Jakub Jelinek  <jakub@redhat.com>

        PR debug/54796
        * rtl.h: Document jump flag on VALUE.
        * cselib.h (cselib_set_value_sp_based,
        cselib_sp_based_value_p): New prototypes.
        * alias.c (find_base_term): For cselib_sp_based_value_p
        return static_reg_base_value[STACK_POINTER_REGNUM].
        * cselib.c (SP_BASED_VALUE_P): Define.
        (cselib_set_value_sp_based, cselib_sp_based_value_p): New functions.
        * var-tracking.c (add_stores): Call cselib_set_value_sp_based
        for not yet preserved VALUEs of sp on sp assignments if
        hard_frame_pointer_adjustment != -1.
        (vt_initialize): When setting hard_frame_pointer_adjustment,
        disassociate sp from its previous value and call
        cselib_set_value_sp_based on a new VALUE created for sp.

        PR tree-optimization/54889
        * tree-vect-stmts.c (vectorizable_load): Add VIEW_CONVERT_EXPR if
        ARRAY_REF newref doesn't have compatible type with vectype element
        type, use vectype element type for MEM_REF.

2012-10-16  Steven Bosscher  <steven@gcc.gnu.org>

        * combine.c (record_dead_and_set_regs): Iterate over hard register set
        with a hard_reg_set_iterator.
        * cse.c (invalidate_for_call): Likewise.
        * gcse.c (compute_hash_table_work): Likewise.
        * loop-iv.c (simplify_using_initial_values): Likewise.
        * postreload-gcse.c (record_opr_changes): Likewise.
        * regcprop.c (copyprop_hardreg_forward_1): Likewise.
        * var-tracking.c (dataflow_set_clear_at_call): Likewise.

2012-10-15   Easwaran Raman  <eraman@google.com>

        * optabs.c (emit_cmp_and_jump_insn_1): Add a new parameter to
        specificy the probability of taking the jump.
        (emit_cmp_and_jump_insns): Likewise.
        (expand_compare_and_swap_loop): Make the jump predicted not taken.
        * dojump.c (do_compare_rtx_and_jump): Remove the code attaching
        REG_BR_PROB note and pass probability to emit_cmp_and_jump_insns.
        * cfgbuild.c (compute_outgoing_frequencies): Do not guess outgoing
        probabilities for branches with more than two successors.
        * expr.c (emit_block_move_via_loop): Predict the loop backedge loop
        to be highly taken.
        (try_casesi): Pass the probability of jumping to the default label.
        (try_tablejump): Likewise.
        (do_tablejump): Likewise.
        * expr.h (try_tablejump): Add a new parameter.
        (try_casesi): Likewise.
        (emit_cmp_and_jump_insns): Add probability as default parameter with a
        default value of -1.
        * except.c (sjlj_emit_function_enter): Pass probability to
        emit_cmp_and_jump_insns.
        * stmt.c (case_node): Add new fields PROB and SUBTREE_PROB.
        (do_jump_if_equal): Pass probability for REG_BR_PROB note.
        (add_case_node): Pass estimated probability of jumping to the case
        label.
        (emit_case_decision_tree): Pass default_prob to emit_case_nodes.
        (get_outgoing_edge_probs): New function.
        (conditional_probability): Likewise.
        (reset_out_edges_aux): Likewise.
        (compute_cases_per_edge): Likewise.
        (emit_case_dispatch_table): Update probabilities of edges coming out
        of the switch statement.
        (expand_case): Compute and propagate default edge probability to
        emit_case_dispatch_table.
        (expand_sjlj_dispatch_table): Update calls to add_case_node and
        emit_case_dispatch_table.
        (balance_case_nodes): Update subtree_prob values.
        (emit_case_nodes): Compute edge probabilities and add pass them to
        emit_cmp_and_jump_insns.

2012-10-15  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/51244
        * config/sh/sh-protos.h (set_of_reg): New struct.
        (sh_find_set_of_reg, sh_is_logical_t_store_expr,
        sh_try_omit_signzero_extend):  Declare...
        * config/sh/sh.c (sh_find_set_of_reg, sh_is_logical_t_store_expr,
        sh_try_omit_signzero_extend): ...these new functions.
        * config/sh/sh.md (*logical_op_t): New insn_and_split.
        (*zero_extend<mode>si2_compact): Use sh_try_omit_signzero_extend
        in splitter.
        (*extend<mode>si2_compact_reg): Convert to insn_and_split.
        Use sh_try_omit_signzero_extend in splitter.
        (*mov<mode>_reg_reg): Disallow t_reg_operand as operand 1.
        (*cbranch_t): Rewrite combine part in splitter using new
        sh_find_set_of_reg function.

2012-10-15  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54760
        * config/sh/sh.c (sh_find_base_reg_disp): Stop searching insns when
        hitting a call insn if GBR is marked as call used.
        * config/sh/iterators.md (QIHISIDI): New mode iterator.
        * config/sh/predicates.md (gbr_address_mem): New predicate.
        * config/sh/sh.md (*movdi_gbr_load, *movdi_gbr_store): New
        insn_and_split.  Use QIHISIDI instead of QIHISI in unnamed GBR
        addressing splits.

2012-10-15  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.c: Update function attribute comments.
        * doc/extend.texi (function_vector): Rephrase SH2A specific part.
        (nosave_low_regs, renesas, trapa_handler): Document SH specific
        attributes.
        (sp_switch, trap_exit): Add to index.

2012-10-15  Matthias Klose  <doko@ubuntu.com>

        * config.gcc: Match arm*-*-linux-* for ARM Linux/GNU.
        * doc/install.texi: Use arm-*-*linux-* instead of arm-*-*linux-gnueabi.

2012-10-15  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/sse.md (UNSPEC_MOVU): Remove.
        (UNSPEC_LOADU): New.
        (UNSPEC_STOREU): Ditto.
        (<sse>_movu<ssemodesuffix><avxsizesuffix>): Split to ...
        (<sse>_loadu<ssemodesuffix><avxsizesuffix>): ... this and ...
        (<sse>_storeu<ssemodesuffix><avxsizesuffix>) ... this.
        (<sse2>_movdqu<avxsizesuffix>): Split to ...
        (<sse2>_loaddqu<avxsizesuffix>): ... this and ...
        (<sse2>_storedqu<avxsizesuffix>): ... this.
        (*sse4_2_pcmpestr_unaligned): Update.
        (*sse4_2_pcmpistr_unaligned): Ditto.

        * config/i386/i386.c (ix86_avx256_split_vector_move_misalign): Use
        gen_avx_load{dqu,ups,upd}256 to load from unaligned memory and
        gen_avx_store{dqu,ups,upd}256 to store to unaligned memory.
        (ix86_expand_vector_move_misalign): Use gen_sse_loadups or
        gen_sse2_load{dqu,upd} to load from unaligned memory and
        gen_sse_loadups or gen_sse2_store{dqu,upd}256 to store to
        unaligned memory.
        (struct builtin_description bdesc_spec) <IX86_BUILTIN_LOADUPS>:
        Use CODE_FOR_sse_loadups.
        <IX86_BUILTIN_LOADUPD>: Use CODE_FOR_sse2_loadupd.
        <IX86_BUILTIN_LOADDQU>: Use CODE_FOR_sse2_loaddqu.
        <IX86_BUILTIN_STOREUPS>: Use CODE_FOR_sse_storeups.
        <IX86_BUILTIN_STOREUPD>: Use CODE_FOR_sse2_storeupd.
        <IX86_BUILTIN_STOREDQU>: Use CODE_FOR_sse2_storedqu.
        <IX86_BUILTIN_LOADUPS256>: Use CODE_FOR_avx_loadups256.
        <IX86_BUILTIN_LOADUPD256>: Use CODE_FOR_avx_loadupd256.
        <IX86_BUILTIN_LOADDQU256>: Use CODE_FOR_avx_loaddqu256.
        <IX86_BUILTIN_STOREUPS256>: Use CODE_FOR_avx_storeups256.
        <IX86_BUILTIN_STOREUPD256>: Use CODE_FOR_avx_storeupd256.
        <IX86_BUILTIN_STOREDQU256>: Use CODE_FOR_avx_storedqu256.

2012-10-15  Dodji Seketeli  <dodji@redhat.com>

        * alias.c: Cleanup comments.

2012-10-15  Marc Glisse  <marc.glisse@inria.fr>

        PR tree-optimization/54915
        * tree-ssa-forwprop.c (simplify_vector_constructor): Check
        argument's type.

2012-10-15  Richard Biener  <rguenther@suse.de>

        * data-streamer.h (bp_pack_string_with_length): New function.
        (bp_pack_string): Likewise.
        (bp_unpack_indexed_string): Likewise.
        (bp_unpack_string): Likewise.
        * data-streamer-out.c (bp_pack_string_with_length): Likewise.
        (bp_pack_string): Likewise.
        * data-streamer-in.c (bp_unpack_indexed_string): Likewise.
        (bp_unpack_string): Likewise.
        * tree-streamer-out.c (pack_ts_translation_unit_decl_value_fields):
        Pack TRANSLATION_UNIT_LANGUAGE here, not ...
        (write_ts_translation_unit_decl_tree_pointers): ... here.  Remove.
        (streamer_pack_tree_bitfields): Adjust.
        (streamer_write_tree_body): Likewise.
        * tree-streamer-in.c (unpack_ts_translation_unit_decl_value_fields):
        Unpack TRANSLATION_UNIT_LANGUAGE here, not ...
        (lto_input_ts_translation_unit_decl_tree_pointers): ... here.  Remove.
        (unpack_value_fields): Adjust.
        (streamer_read_tree_body): Likewise.

2012-10-15  J"orn Rennecke  <joern.rennecke@arc.com>

        * genoutput.c (process_template): Process '*' in '@' alternatives.
        * doc/md.texi (node Output Statement): Provide example for the above.

2012-10-15  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/54920
        * tree-ssa-pre.c (create_expression_by_pieces): Properly
        allocate temporary storage for all NARY elements.

2012-10-15  Joern Rennecke  <joern.rennecke@embecosm.com>

        * web.c (union_match_dups): Properly handle OP_INOUT match_dups.

2012-10-15  Eric Botcazou  <ebotcazou@adacore.com>

        * expr.c (expand_expr_real_1) <VIEW_CONVERT_EXPR>: Do not unnecessarily
        copy the object in the MEM_P case.

2012-10-15  Richard Guenther  <rguenther@suse.de>

        * tree-streamer-out.c (streamer_pack_tree_bitfields): Back
        BINFO_BASE_ACCESSES and CONSTRUCTOR lengths here.
        (streamer_write_chain): Write TREE_CHAIN as null-terminated list.
        (write_ts_exp_tree_pointers): Adjust.
        (write_ts_binfo_tree_pointers): Likewise.
        (write_ts_constructor_tree_pointers): Likewise.
        * tree-streamer-in.c (streamer_read_chain): Read TREE_CHAIN as
        null-terminated list.
        (unpack_value_fields): Unpack BINFO_BASE_ACCESSES and
        CONSTRUCTOR lengths and materialize the arrays.
        (lto_input_ts_exp_tree_pointers): Adjust.
        (lto_input_ts_binfo_tree_pointers): Likewise.
        (lto_input_ts_constructor_tree_pointers): Likewise.

2012-10-14  Hans-Peter Nilsson  <hp@bitrange.com>

        * config/mmix/mmix.c (mmix_opposite_regno): Handle the
        return-value register too.

2012-10-14  Steven Bosscher  <steven@gcc.gnu.org>

        PR rtl-optimization/38711
        * df.h (df_get_live_out, df_get_live_in): Make static inline functions.
        * df-problems.c (df_get_live_out, df_get_live_in): Moved to df.h.
        * ira-lives.c (process_bb_node_lives): Use df_get_live_out instead of
        DF_LR_OUT.
        * ira-build.c (create_bb_allocnos): Likewise.
        (create_loop_allocnos): Likewise, and use df_get_live_in instead of
        DF_LR_IN.
        * ira-emit.c (generate_edge_moves): Likewise.
        (add_ranges_and_copies): Likewise.
        * ira-color.c (ira_loop_edge_freq): Use df_get_live_out instead of
        DF_LR_OUT, and df_get_live_in instead of DF_LR_IN.
        * ira.c (mark_elimination): Update DF_LR and DF_LIVE.
        (build_insn_chain): Use df_get_live_out instead of DF_LR_OUT.
        (do_reload): Remove the DF_LIVE problem for -O1.

2012-10-14  Steven Bosscher  <steven@gcc.gnu.org>

        PR rtl-optimization/54919
        * loop-unroll.c (struct var_to_expand): Remove accum_pos field.
        (analyze_insn_to_expand_var): Do not record accum_pos.
        (expand_var_during_unrolling): Use validate_replace_rtx_group to
        perform replacement of all references to SET_DEST (set) with the
        new register, including references in REG_EQUAL notes.
        (insert_var_expansion_initialization): Insert initializatio insns
        at the bottom of the pre-header of the loop.

2012-10-14  Jan Hubicka  <jh@suse.cz>

        * tree-ssa-loop-niter.c (estimate_numbers_of_iterations_loop): Do not
        predict loops with multiple exits realistically.
        * cfgloopanal.c (single_likely_exit): New function.

2012-10-14  Uros Bizjak  <ubizjak@gmail.com>

        * config/alpha/alpha.md: Remove empty predicates and/or constraints.
        * config/alpha/sync.md: Ditto.

2012-10-13  Uros Bizjak  <ubizjak@gmail.com>

        * config/alpha/alpha.md (I24MODE): New mode iterator.
        (any_divmod): New code iterator.
        (<code>si3): Macroize expander from {div,mod,udiv,umod}si3 using
        any_divmod code iterator.
        (<code>si3): Macroize expander from {div,mod,udiv,umod}di3 using
        any_divmod code iterator.
        (extendqi<mode>2): Macroize insn from extendqi{hi,si}2 using
        I24MODE mode iterator.
        (unaligned_store<mode>): Macroize expander from unaligned_store{qi,hi}
        using I12MODE mode iterator.
        (mov<mode>): Macroize expander from mov{qi,hi} using
        I12MODE mode iterator.

2012-10-13  Eric Botcazou  <ebotcazou@adacore.com>

        PR rtl-optimization/54871
        * loop-iv.c (simplify_using_initial_values): When scanning previous
        basic blocks, prune the recorded conditions if the current insn was
        not used to make a replacement.

        * loop-unroll.c (decide_unroll_constant_iterations): Clean up message.
        (unroll_loop_constant_iterations): Clarify head comment.
        (decide_unroll_runtime_iterations): Clean up message.
        (unroll_loop_runtime_iterations): Clarify head comment.
        (decide_peel_simple): Clean up message.
        (peel_loop_simple): Clarify head comment.
        (decide_unroll_stupid): Clean up message.
        (unroll_loop_stupid): Clarify head comment.

2012-10-13  Andreas Schwab  <schwab@linux-m68k.org>

        PR gcov-profile/44728
        * gcov.c (create_file_names): When stripping extension only look
        at base name.

2012-10-13  Jan Hubicka  <jh@suse.cz>

        * loop-iv.c (determine_max_iter): Fix handling of AND.
        (iv_number_of_iterations): Record upper bounds as unsigned
        values.

2012-10-13  Steven Bosscher  <steven@gcc.gnu.org>

        * ira.c (ira): Set current_loops to &ira_loops before recording
        loop exits.  Release recorded exits and loops early.

2012-10-13  Chung-Lin Tang  <cltang@codesourcery.com>

        * builtins.c (expand_builtin_set_thread_pointer): Use
        create_input_operand() instead of create_fixed_operand().

2012-10-13  Uros Bizjak  <ubizjak@gmail.com>

        * config/alpha/alpha.md (FMODE): New mode iterator.
        (modesuffix): Handle SF and DF modes.
        (opmode): New mode attribute.
        (abs<mode>2): Macroize insn from abs{sf,df}2 using FMODE mode iterator.
        (*nabs<mode>2): Macroize insn from *nabs{sf,df}2 using
        FMODE mode iterator.
        (neg<mode>2): Macroize insn from neg{sf,df}2 using FMODE mode iterator.
        (copysign<mode>3): Macroize insn from copysign{sf,df}3 using
        FMODE mode iterator.
        (*ncopysign<mode>3): Macroize insn from *ncopysign{sf,df}3 using
        FMODE mode iterator.
        (*add<mode>3_ieee): Macroize insn from *add{sf,df}_ieee using
        FMODE mode iterator.
        (add<mode>3): Macroize insn from add{sf,df}3 using FMODE mode iterator.
        (*sub<mode>3_ieee): Macroize insn from *sub{sf,df}3_ieee using
        FMODE mode iterator.
        (sub<mode>3): Macroize insn from sub{sf,df}3 using FMODE mode iterator.
        (*mul<mode>3_ieee): Macroize insn from *mul{sf,df}3_ieee using
        FMODE mode iterator.
        (mul<mode>3): Macroize insn from mul{sf,df}3 using FMODE mode iterator.
        (*div<mode>3_ieee): Macroize insn from *div{sf,df}3_ieee using
        FMODE mode iterator.
        (div<mode>3): Macroize insn from div{sf,df}3 using FMODE mode iterator.
        (*sqrt<mode>2_ieee): Macroize insn from *sqrt{sf,df}2_ieee using
        FMODE mode iterator.
        (sqrt<mode>2): Macroize insn from sqrt{sf,df}2
        using FMODE mode iterator.
        (*mov<mode>cc_internal): Macroize insn from *mov{sf,df}cc_internal
        using FMODE mode iterator.
        (mov<mode>cc): Macroize expander from mov{sf,df}cc
        using FMODE mode iterator.

2012-10-12  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54602
        * config/sh/sh.md: Correct define_delay for return insns.
        (*movsi_pop): Delete.

2012-10-12  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54680
        * config/sh/sh.c (sh_fsca_sf2int, sh_fsca_int2sf): Fix swapped
        comments.
        * config/sh/predicates.md (fpul_operand): Add comment.
        (fpul_fsca_operand, fsca_scale_factor): New predicates.
        * config/sh/sh.md (fsca): Move below sincossf3 expander.  Convert to
        insn_and_split.  Use fpul_fsca_operand and fsca_scale_factor
        predicates.  Simplify fpul operand in splitter.

2012-10-12  Jan Hubicka <jh@suse.cz>

        * tree-ssa-threadupdate.c (def_split_header_continue_p): Do not
        escape the loop.

2012-10-12  Jan Hubicka <jh@suse.cz>

        * web.c (web_main): Do not set DF_RD_PRUNE_DEAD_DEFS flag.

2012-10-12  Aaron Gray <aaronngray.lists@gmail.com>
            Diego Novillo <dnovillo@google.com>

        * gengtype-lex.l: Support for C++ single line comments.
        Support for classes.
        (CXX_KEYWORD): New.  Support C++ keywords inline, public,
        protected, private, template, operator, friend, &, ~.
        (TYPEDEF): New.  Support typedef.
        * gengtype-parser.c: updated 'token_names[]'
        (direct_declarator): Add support for parsing functions and ctors.

2012-10-12  Diego Novillo  <dnovillo@google.com>

        * doc/gty.texi: Document C++ limitations in gengtype.
        * gengtype-lex.l (CID): Rename from ID.
        (ID): Include scoping '::' as part of the identifier name.
        * gengtype-parse.c (token_names): Update.
        (token_value_format): Update.
        (consume_until_eos): Rename from consume_until_semi.
        Remove unused argument IMMEDIATE.  Update all callers.
        Also consider '}' as a finalizer.
        (consume_until_comma_or_eos): Rename from
        consume_until_comma_or_semi.
        Remove unused argument IMMEDIATE.  Update all callers.
        Also consider '}' as a finalizer.
        (direct_declarator): Add documentation on ctor support.
        Add argument IN_STRUCT.
        If the token following ID is a '(', consider ID a
        function and return NULL.
        If the token following '(' is not a '*', and IN_STRUCT is true,
        conclude that this is a ctor and return NULL.
        If the token is IGNORABLE_CXX_KEYWORD, return NULL.
        (inner_declarator): Add argument IN_STRUCT.
        Update all callers.
        (declarator): Add argument IN_STRUCT with default value false.
        Update all callers.
        (type): Document argument NESTED.
        Skip over C++ inheritance specifiers.
        If a token TYPEDEF is found, emit an error.
        If an enum is found inside a class/structure, emit an error.
        (typedefs, structures, param_structs, variables): Initialize.
        (new_structure): Do not complain about duplicate
        structures if S has a line location set.
        * gengtype-state.c (write_state_type): Remove default handler.
        Add handler for TYPE_NONE.
        (read_state_scalar_char_type):
        * gengtype.c: Fix spacing.
        * gengtype.h (enum gty_token): Add name.  Add token
        IGNORABLE_CXX_KEYWORD.

2012-10-12  Chung-Lin Tang  <cltang@codesourcery.com>

        * config/arm/arm.md (get_thread_pointersi): Moved to place with
        other TLS related patterns.

2012-10-12  Richard Biener  <rguenther@suse.de>

        * tree-streamer-out.c (pack_ts_target_option): Rename from ...
        (write_ts_target_option): ... this.
        (pack_ts_optimization): Rename from ...
        (write_ts_optimization): ... this.
        (streamer_pack_tree_bitfields): Pack them in the bitfield section ...
        (streamer_write_tree_body): ... not here.
        * tree-streamer-in.c (unpack_ts_target_option): Rename from ...
        (lto_input_ts_target_option): ... this.
        (unpack_ts_optimization): Rename from ...
        (lto_input_ts_optimization): ... this.
        (unpack_value_fields): Unpack them from the bitfield section ...
        (streamer_read_tree_body): ... not from here.

2012-10-12  Uros Bizjak  <ubizjak@gmail.com>

        * config/alpha/alpha.md (vecmodesuffix): New mode attribute.
        (modesuffix): Handle V8QI and V4HI modes.
        (any_maxmin): New code iterator.
        (maxmin): New code attribute.
        (<code><mode>3): Macroize insn from {smax,smin,umax,umin}{qi,hi}3
        using any_maxmin code iterator and I12MODE mode iterator.
        (<code><mode>3): Macroize insn from {smax,smin,umax,umin}{v8qi,v4hi}3
        using any_maxmin code iterator and VEC12 mode iterator.

2012-10-12  Marc Glisse  <marc.glisse@inria.fr>

        * optabs.c (vector_compare_rtx): Change prototype.
        (expand_vec_cond_expr): Handle VEC_COND_EXPR whose first operand
        is not a comparison.
        * gimplify.c (gimplify_expr): Handle VEC_COND_EXPR.

2012-10-12  Richard Biener  <rguenther@suse.de>

        PR tree-optimization/54894
        * tree-vect-stmts.c (get_vectype_for_scalar_type_and_size):
        Handle over-aligned scalar types properly.

2012-10-12  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54760
        * config/sh/sh.c (bdesc): Remove thread pointer built-ins.
        * config/sh/sh.md (get_thread_pointer, set_thread_pointer): Append mode
        name 'si'.

2012-10-12  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/51244
        * config/sh/sh.md (negsi_cond, negdi_cond, stack_protect_test): Remove
        get_t_reg_rtx when invoking gen_branch_true or gen_branch_false.
        (*zero_extend<mode>si2_compact): Convert to insn_and_split.  Convert
        zero extensions of T bit stores to reg moves in splitter.  Remove
        obsolete unnamed peephole2 that caught zero extensions after negc T bit
        stores.
        (*branch_true_eq, *branch_false_ne): Delete.
        (branch_true, branch_false): Convert insn to expander.  Move actual
        insn logic to...
        (*cbranch_t): ...this new insn_and_split.  Try to find preceding
        redundant T bit stores and tests and combine them with the conditional
        branch if possible in the splitter.
        (movrt_xor, *movt_movrt): New insn_and_split.
        * config/sh/predicates.md (cbranch_treg_value): New predicate.
        * config/sh/sh-protos.h (sh_eval_treg_value): Forward declare...
        * config/sh/sh.c (sh_eval_treg_value): ...this new function.
        (expand_cbranchsi4, expand_cbranchdi4): Remove get_t_reg_rtx
        when invoking gen_branch_true or gen_branch_false.

2012-10-11  Uros Bizjak  <ubizjak@gmail.com>

        * config/alpha/alpha.md (IMODE): New mode iterator.
        (I124MODE): Ditto.
        (I248MODE): Ditto.
        (modesuffix): Handle QI and HI modes.
        (zero_extendqi<mode>2): Macroize insn from zero_extendqi{hi,si,di}2
        using I248MODE mode iterator.
        (zero_extendhi<mode>2): Macroize insn from zero_extendhi{si,di}2
        using I48MODE mode iterator.
        (andnot<mode>3): Macroize insn from andnot{si,di}3 using
        I48MODE mode iterator.
        (ins<modesuffix>l_const): Macroize insn from ins{b,w,l}l_const
        using I248MODE mode iterator.
        (ins<modesuffix>l): Macroize insn from ins{b,w,l}l
        using I248MODE mode iterator.
        (*mov<mode>cc_internal): Macroize insn from
        *mov{qi,hi,si,di}cc_internal using IMODE mode iterator.
        (*mov<mode>cc_lbc): Macroize insn from
        *mov{qi,hi,si,di}cc_lbc using IMODE mode iterator.
        (*mov<mode>cc_lbs): Macroize insn from
        *mov{qi,hi,si,di}cc_lbs using IMODE mode iterator.
        (mov<mode>cc): Macroize expander from mov{si,di}cc
        using I48MODE mode iterator.

2012-10-11  Steven Bosscher  <steven@gcc.gnu.org>

        * ira-build.c (ira_loop_tree_body_rev_postorder): New function.
        (ira_traverse_loop_tree): Traverse a loop's basic blocks in
        reverse post-order of the reversed control-flow direction.
        * ira-conflicts.c (ira_build_conflicts): Pass add_copies as
        the pre-order function to ira_traverse_loop_tree to preserve
        the existing semantics.

        * ira-lives.c (remove_some_program_points_and_update_live_ranges):
        Squeeze out live range chain elements if their program points are
        connected.

2012-10-11  Jakub Jelinek  <jakub@redhat.com>

        * tree.def (REDUC_PLUS_EXPR): Fix up comment.

        * fold-const.c (fold_unary_loc): Handle REDUC_MIN_EXPR,
        REDUC_MAX_EXPR and REDUC_PLUS_EXPR.

2012-10-11  James Lemke  <jwlemke@codesourcery.com>

        * config/rs6000/predicates.md (zero_fp_constant): Fix comment.
        * config/rs6000/rs6000.md (return_pred): Fix null return.
        * config/rs6000/rs6000.c (rs6000_emit_set_const): Fix indentation.
        (print_operand): Make FALLTHRU obvious.
        (output_cbranch): Correct comment.

2012-10-11  Uros Bizjak  <ubizjak@gmail.com>

        * config/alpha/alpha.md (DWI): New mode attribute.
        (*sadd<modesuffix>): Macroize insn from *saddl and *saddq using
        I48MODE mode iterator.
        (addv<mode>3): Macroize insn from addvsi3 and addvdi3 using
        I48MODE mode iterator.
        (neg<mode>2): Macroize insn from negsi2 and negdi2 using
        I48MODE mode iterator.
        (negv<mode>2): Macroize insn from negvsi2 and negvdi2 using
        I48MODE mode iterator.
        (sub<mode>3): Macroize insn from subsi3 and subdi3 using
        I48MODE mode iterator.
        (*ssub<modesuffix>): Macroize insn from *ssubl and *ssubq using
        I48MODE mode iterator.
        (subv<mode>3): Macroize insn from subvsi3 and subvdi3 using
        I48MODE mode iterator.
        (mul<mode>3): Macroize insn from mulsi3 and muldi3 using
        I48MODE mode iterator.
        (mulv<mode>3): Macroize insn from mulvsi3 and mulvdi3 using
        I48MODE mode iterator.
        (*iornot<mode>3): Macroize insn from *iornotsi3 and *iornotdi3 using
        I48MODE mode iterator.
        (*xornot<mode>3): Macroize insn from *xornotsi3 and *xornotdi3 using
        I48MODE mode iterator.

2012-10-11  Jason Merrill  <jason@redhat.com>

        * configure.ac (gcc_cv_as_aix_ref): Fix typo.
        * configure: Regenerate.

2012-10-11  Chung-Lin Tang  <cltang@codesourcery.com>

        * builtins.c (expand_builtin_thread_pointer): New.
        (expand_builtin_set_thread_pointer): New.
        (expand_builtin): Add BUILT_IN_THREAD_POINTER,
        BUILT_IN_SET_THREAD_POINTER expand cases.
        * builtins.def (BUILT_IN_THREAD_POINTER):
        New __builtin_thread_pointer builtin.
        (BUILT_IN_SET_THREAD_POINTER):
        New __builtin_set_thread_pointer builtin.
        * optabs.def (get_thread_pointer,set_thread_pointer):
        New standard names.
        * doc/md.texi (Standard Names): Document get_thread_pointer and
        set_thread_pointer patterns.
        * config/alpha/alpha.md (get_thread_pointerdi): Rename from load_tp.
        (set_thread_pointerdi): Rename from set_tp.
        * config/alpha/alpha.c (alpha_legitimize_address_1): Change
        gen_load_tp calls to gen_get_thread_pointerdi.
        (alpha_builtin): Remove ALPHA_BUILTIN_THREAD_POINTER,
        ALPHA_BUILTIN_SET_THREAD_POINTER.
        (code_for_builtin): Remove CODE_FOR_load_tp, CODE_FOR_set_tp.
        (alpha_init_builtins): Remove __builtin_thread_pointer,
        __builtin_set_thread_pointer machine-specific builtins.
        (alpha_expand_builtin_thread_pointer): Add hook function for
        TARGET_EXPAND_BUILTIN_THREAD_POINTER.
        (alpha_expand_builtin_set_thread_pointer): Add hook function for
        TARGET_EXPAND_BUILTIN_SET_THREAD_POINTER.
        (alpha_fold_builtin): Remove ALPHA_BUILTIN_THREAD_POINTER,
        ALPHA_BUILTIN_SET_THREAD_POINTER cases.
        * config/arm/arm.md (get_thread_pointersi): New pattern.
        * config/arm/arm-protos.h (arm_load_tp): Add extern declaration.
        * config/arm/arm.c (arm_load_tp): Remove static.
        (arm_builtins): Remove ARM_BUILTIN_THREAD_POINTER.
        (arm_init_tls_builtins): Remove function.
        (arm_init_builtins): Remove call to arm_init_tls_builtins().
        (arm_expand_builtin): Remove ARM_BUILTIN_THREAD_POINTER case.
        * config/mips/mips.md (get_thread_pointer<mode>): New pattern.
        * config/mips/mips-protos.h (mips_expand_thread_pointer):
        Add extern declaration.
        * config/mips/mips.c (mips_expand_thread_pointer):
        Renamed from mips_get_tp.
        (mips_get_tp): New stub calling mips_expand_thread_pointer.
        * config/s390/s390.c (s390_builtin,code_for_builtin_64,
        code_for_builtin_31,s390_init_builtins,s390_expand_builtin): Remove.
        * config/s390/s390.md (get_tp_64,get_tp_31,set_tp_64,set_tp_31):
        Remove.
        (get_thread_pointer<mode>,set_thread_pointer<mode>):
        New, adapted from removed patterns.
        * config/xtensa/xtensa.md (get_thread_pointersi):
        Renamed from load_tp.
        (set_thread_pointersi): Renamed from set_tp.
        * config/xtensa/xtensa.c (xtensa_legitimize_tls_address):
        Change gen_load_tp calls to gen_get_thread_pointersi.
        (xtensa_builtin): Remove XTENSA_BUILTIN_THREAD_POINTER and
        XTENSA_BUILTIN_SET_THREAD_POINTER.
        (xtensa_init_builtins): Remove __builtin_thread_pointer,
        __builtin_set_thread_pointer machine-specific builtins.
        (xtensa_fold_builtin): Remove XTENSA_BUILTIN_THREAD_POINTER,
        XTENSA_BUILTIN_SET_THREAD_POINTER cases.
        (xtensa_expand_builtin): Remove XTENSA_BUILTIN_THREAD_POINTER,
        XTENSA_BUILTIN_SET_THREAD_POINTER cases.

2012-10-11  Marc Glisse  <marc.glisse@inria.fr>

        * doc/extend.texi (Vector Extensions): C++ improvements.
        * doc/generic.texi (LSHIFT_EXPR, RSHIFT_EXPR): Mixed vector-scalar.
        (LT_EXPR, LE_EXPR, GT_EXPR, GE_EXPR, EQ_EXPR, NE_EXPR): Specify
        the vector case.
        (VEC_COND_EXPR): Document it.

2012-10-11  Terry Guo  <terry.guo@arm.com>

        * config/arm/arm.c (arm_arch6m): New variable to denote armv6-m
        architecture.
        * config/arm/arm.h (TARGET_HAVE_DMB): The armv6-m also has DMB
        instruction.

2012-10-11  Hans-Peter Nilsson  <hp@bitrange.com>

        PR target/54373
        * configure.ac (out-of-tree linker .hidden support) Set to "no"
        for mmix-knuth-mmixware.
        * configure: Regenerate.

        * configure.ac (gcc_cv_as_comdat_group_group): Default to no.
        * configure: Regenerate.

        * acinclude.m4 (_gcc_COMPUTE_GAS_VERSION): Allow a single
        character to quote the VERSION= contents.  Sanity-check contents.
        * configure.ac ("what linker to use" ld version extraction): Ditto.
        * configure: Regenerate.

2012-10-10  Segher Boessenkool  <segher@kernel.crashing.org>

        * config/rs6000/rs6000.h (PRINT_OPERAND_PUNCT_VALID_P): Delete '.'.

2012-10-10  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/54877
        * tree-vect-loop.c (vect_is_simple_reduction_1): For MINUS_EXPR
        use make_ssa_name instead of copy_ssa_name.

2012-10-10  Richard Biener  <rguenther@suse.de>

        * lto-streamer-in.c (lto_input_location_bitpack): Rename to ...
        (lto_input_location): ... this.  Kill original.
        (input_eh_region): Adjust.
        (input_struct_function_base): Likewise.
        (lto_read_tree): Likewise.
        * lto-streamer-out.c (lto_output_location_bitpack): Rename to ...
        (lto_output_location): ... this.  Kill original.
        (lto_write_tree): Adjust.
        (output_eh_region): Likewise.
        (output_struct_function_base): Likewise.
        * lto-streamer.c (lto_streamer_hooks_init): Initialize location hooks.
        * lto-streamer.h (lto_input_location): Adjust prototype.
        (lto_output_location): Likewise.
        * streamer-hooks.h (struct streamer_hooks): Adjust prototype
        of input_location and output_location hooks.
        (stream_input_location): New define.
        (stream_output_location): Likewise.
        * tree-streamer-in.c (unpack_ts_block_value_fields): Adjust.
        (unpack_value_fields): Likewise.
        (streamer_read_tree_bitfields): Likewise.
        (lto_input_ts_decl_minimal_tree_pointers): Likewise.
        (lto_input_ts_exp_tree_pointers): Likewise.
        (lto_input_ts_block_tree_pointers): Likewise.
        * tree-streamer-out.c (pack_ts_block_value_fields): Adjust.
        (streamer_pack_tree_bitfields): Likewise.
        (write_ts_decl_minimal_tree_pointers): Likewise.
        (write_ts_exp_tree_pointers): Likewise.
        (write_ts_block_tree_pointers): Likewise.
        * gimple-streamer-in.c (input_phi): Adjust.
        (input_gimple_stmt): Likewise.
        * gimple-streamer-out.c (output_phi): Adjust.
        (output_gimple_stmt): Likewise.
        * tree-streamer.h (streamer_read_tree_bitfields): Adjust prototype.
        (streamer_pack_tree_bitfields): Likewise.

2012-10-10  Michael Meissner  <meissner@linux.vnet.ibm.com>

        * config/rs6000/rs6000.c (altivec_expand_dst_builtin): Fix signed
        vs. unsigned warnings by using enum type for function code.
        (paired_expand_builtin): Likewise.
        (spe_expand_builtin): Likewise.

        * config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Change
        builtin mask, target flags masks type to HOST_WIDE_INT in
        preparation for growing the number of ISA switches from 31 to 63.

        * config/rs6000/rs6000.opt (rs6000_builtin_mask): Make mask type
        HOST_WIDE_INT.

        * config/rs6000/rs6000.c (struct builtin_description): Make
        builtin mask field HOST_WIDE_INT.  Make target flags field
        HOST_WIDE_INT in preparation for growing the # of ISA switches.
        (struct rs6000_builtin_info_type): Likewise.
        (struct rs6000_ptt): Likewise.
        (rs6000_builtin_mask_calculate): Likewise.
        (rs6000_invalid_builtin): Likewise.
        (rs6000_builtin_decl): Likewise.
        (rs6000_common_init_builtins): Likewise.
        (rs6000_darwin_file_start): Likewise.
        (rs6000_final_prescan_insn): Likewise.
        (rs6000_inner_target_options): Likewise.
        (build_target_option_node): Likewise.
        (rs6000_function_specific_print): Likewise.
        (DEBUG_FMT_W): New format for printing HOST_WIDE_INT in hex.

        * config/rs6000/rs6000-protos.h (rs6000_builtin_mask_calculate):
        Make target flags, builtin masks arguments/return values
        HOST_WIDE_INT in preparation for growing the number of ISA from 31
        to 63.
        (rs6000_target_modify_macros): Likewise.
        (rs6000_target_modify_macros_ptr): Likewise.

        * config/rs6000/rs6000.c (DEBUG_FMT_ID): Move "-32s" to a separate
        define and change DEBUG_FMT_<x> to use it.
        (DEBUG_FMT_D): Likewise.
        (DEBUG_FMT_S): Likewise.
        (DEBUG_FMT_X): Delete, no longer used.
        (DEBUG_FMT_W): Likewise.
        (DEBUG_FMT_WX): New debug format for printing options in a
        friendly fashion.
        (rs6000_debug_reg_global): If -mdebug=reg, print all of the
        options in target_flags and target_flags_explicit.  Print the
        default options for -mcpu=<xxx>, -mtune=<xxx>, and the default
        options.  Adjust printing out the builtin options.
        (rs6000_option_override_internal): Change printing the builtin
        options to use rs6000_print_builtin_options.
        (rs6000_function_specific_print): Change to use
        rs6000_print_isa_options to print ISA flags.
        (rs6000_print_options_internal): New function for expanded
        -mdebug=reg option printing to print both the ISA options, and the
        builtins that are enabled.
        (rs6000_print_isa_options): New function to print the ISA options.
        (rs6000_print_builtin_options): New function to print the builtin
        functions enabled.

2012-10-10  Jakub Jelinek  <jakub@redhat.com>

        PR target/51109
        * config/i386/bdver1.md (bdver1-mult): Remove.

        PR middle-end/54879
        * combine.c (count_rtxs): Use RTX_BIN_ARITH resp. RTX_COMM_ARITH
        instead of '2' resp. 'c' for GET_RTX_CLASS comparisons.

        PR middle-end/54862
        * simplify-rtx.c (simplify_truncation): Compare UINTVAL instead of
        INTVAL of second argument with precision resp. op_precision.

2012-10-10  Dodji Seketeli  <dodji@redhat.com>

        PR middle-end/54860 - Make sure attributes hash table is created
        * attribs.c (register_scoped_attributes): Ensure the attribute
        hash table is created.

2012-10-10  Ganesh Gopalasubramanian  <Ganesh.Gopalasubramanian@amd.com>

        PR target/51109
        * config/i386/bdver1.md (bdver1_int): Automaton has been
        split to reduce state transitions.

2012-10-10  Richard Biener  <rguenther@suse.de>

        PR middle-end/54876
        * ipa-prop.c (prune_expression_for_jf_1): New function.
        (prune_expression_for_jf): Clear EXPR_LOCATION for all
        sub-expressions as well.

2012-10-10  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * config.gcc: Enable zEC12 for with-arch and with-tune
        configure switches.
        * common/config/s390/s390-common.c (processor_flags_table): Add
        zEC12 entry.
        * config/s390/2827.md: New file.
        * config/s390/s390-opts.h (enum processor_type): Add
        PROCESSOR_2827_ZEC12.
        * config/s390/s390.h (enum processor_flags): Add PF_ZEC12.
        (TARGET_CPU_ZEC12, TARGET_ZEC12): New macro definitions.
        * config/s390/s390.c (zEC12_cost): New definition.
        (s390_option_override): Set costs for zEC12.
        Set parameter defaults for zEC12.
        (legitimate_reload_fp_constant_p): Adjust comment.
        (preferred_la_operand_p): Adjust comment.
        (s390_expand_insv): Generate insv pattern without CC clobber for zEC12.
        (s390_adjust_priority): Add zEC12 check.
        (s390_issue_rate): Return 2 for zEC12.
        (s390_reorg): Enable code optimizations for zEC12.
        (s390_sched_reorder): Reorder insns according to OOO attributes.
        (s390_get_sched_attrmask): New function.
        (s390_sched_score): New function.
        (s390_sched_variable_issue): Update s390_sched_state.
        (s390_sched_init): Reset s390_sched_state.
        (s390_loop_unroll_adjust): Enable for zEC12.
        * config/s390/s390.opt: Add zEC12 processor type value.
        * config/s390/s390.md: Enable mnemonic attribute.
        (attr cpu, cpu_facility): Add zEC12.
        Include 2827.md.
        ("*insv<mode>_zEC12", "*insv<mode>_zEC12_noshift")
        ("*load_and_trap<mode>"): New insn definition.
        ("*cmp_and_trap_unsigned_int<mode>"): Add clt and clgt.

2012-10-09  David S. Miller  <davem@davemloft.net>

        * config/sparc/sparc.md (type attribute): Add new types 'visl'
        (VIS logical operation), 'vismv' (VIS move), and 'pdistn'.  Rename
        'fgm_pdist' to 'pdist'.
        (*movsi_insn): Use vismv and visl.
        (*movdi_insn_sp64): Likewise.
        (*movsf_insn): Likewise.
        (*movdf_insn_sp64): Likewise.
        (*mov<VM32:mode>_insn): Likewise, use 'fsrc2s' instead of 'fsrc1s'.
        (*mov<VM64:mode>_insn_sp64): Likewise, use 'fsrc2s'
        instead of 'fsrc1s'.
        (*mov<VM64:mode>_insn_sp32): Likewise, use 'fsrc2s'
        instead of 'fsrc1s'.
        (VIS logical instructions): Mark as visl.
        (pdist_vis): Use 'pdist'.
        (pditsn<mode>_vis): Use 'pdistn'.
        * config/sparc/ultra1_2.md: Adjust for new VIS attribute types.
        * config/sparc/ultra3.md: Likewise.
        * config/sparc/niagara.md: Likewise.
        * config/sparc/niagara2.md: Likewise.
        * config/sparc/niagara4.md: Add cpu units "n4_slot2" and
        "n4_load_store" for special store scheduling.  Use them in load
        and store reservations.  Integer divide and multiply can only
        issue in slot-1.  Represent 1-cycle VIS moves and 3-cycle VIS
        logic operations.

2012-10-10  Dehao Chen  <dehao@google.com>

        * tree-eh.c (lower_try_finally_onedest): Set correct location for
        deallocator.
        * gimplify.c (gimplify_expr): Set correct location for TRY stmt.

2012-10-10  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/52480
        * config/sh/sh.md (extv, extzv): Check that operands[3] is zero,
        regardless of the endianness.

2012-10-09  Lawrence Crowl  <crowl@google.com>

        * Makefile.in (fold-const.o): Add depencence on hash-table.h.
        (dse.o): Likewise.
        (cfg.o): Likewise.
        * fold-const.c (fold_checksum_tree): Change to new
        type-safe hash table.
        * (print_fold_checksum): Likewise.
        * cfg.c (var bb_original): Likewise.
        * (var bb_copy): Likewise.
        * (var loop_copy): Likewise.
        * hash-table.h (template hash_table): Constify parameters for find...
        and remove_elt... member functions.
        (hash_table::empty) Correct size expression.
        (hash_table::clear_slot) Correct deleted entry assignment.
        * dse.c (var rtx_group_table): Change to new type-safe hash table.

2012-10-09  Steven Bosscher  <steven@gcc.gnu.org>

        * basic-block. (profile_record): New struct, moved from passes.c.
        * cfghooks.h (struct cfg_hooks) <account_profile_record>: New hook.
        (account_profile_record): New prototype.
        * cfghooks.c (account_profile_record): New function.
        * tree-cfg.c (gimple_account_profile_record): New function
        (gimple_cfg_hooks): Add it.
        * cfgrtl.c (rtl_account_profile_record): New function
        (rtl_cfg_hooks, cfg_layout_rtl_cfg_hooks): Add it.
        * passes.c (check_profile_consistency): Simplify.  Move IR-dependent
        code around using cfghooks machinery.

2012-10-09  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54760
        * doc/extend.texi (Target Builtins): Add SH built-in section.
        Document __builtin_thread_pointer and __builtin_set_thread_pointer.

2012-10-09  Venkataramanan Kumar  <venkataramanan.kumar@amd.com>

        PR middle-end/53397
        * tree-ssa-loop-prefetch.c (gather_memory_references_ref):
        Perform non constant step prefetching in inner loop, only
        when it is invariant in the entire loop nest.
        * tree-ssa-loop-prefetch.c (dump_mem_details): New function to dump
        base, step and delta values of memeory reference analysed for
        prefetching.
        * tree-ssa-loop-prefetch.c (dump_mem_ref): Call dump_mem_details
        to print base, step and delta values of memory reference.
        * cfgloop.h (loop_outermost): New function that returns outermost
        loop for a given loop in a loop nest.

2012-10-09  Richard Guenther  <rguenther@suse.de>

        PR middle-end/54837
        * cfgexpand.c (expand_debug_source_expr): Move checking
        code conditional on a found decl_debug_args vector.

2012-10-09  Richard Guenther  <rguenther@suse.de>

        * tree-streamer.c (streamer_tree_cache_get): Move ...
        * tree-streamer.h (streamer_tree_cache_get): ... here as inline.

2012-10-09  Jan Hubicka  <jh@suse.cz>

        * loop-unroll.c (unroll_loop_constant_iterations): Add
        update of loop->nb_iterations_upper_bound I missed in my previous
        commit; use TRUNC_DIV_EXPR instead of FLOOR_DIV_EXPR to divide
        iteration count.
        (decide_unroll_runtime_iterations): Avoid overflow.
        (unroll_loop_runtime_iterations): Use TRUNC_DIV_EXPR instead of
        FLOOR_DIV_EXPR to update iteration bounds.
        (decide_peel_simple): Avoid integer overflow when deciding
        on number of peelings.
        (decide_unroll_stupid): Likewise.

2012-10-09  Tobias Burnus  <burnus@net-b.de>

        * lto-cgraph.c (input_node_opt_summary): Remove unused code.
        * lto-opts.c (append_to_collect_gcc_options): Fix condition.
        * lto-symtab.c (lto_cgraph_replace_node): Don't xstrdup string
        which is passed to fprintf.

2012-10-09  Paolo Carlini  <paolo.carlini@oracle.com>

        PR c++/54194
        * tree.h: Add EXPR_LOC_OR_LOC.

2012-10-09  Nick Clifton  <nickc@redhat.com>

        PR rtl-optimization/54739
        * config/mcore/mcore.md: (anddi3, iordi3, xordi3): Delete patterns.

        PR target/54661
        * config/mcore/mcore.c (mcore_output_movedouble): Fix typo.

2012-10-09  Marc Glisse  <marc.glisse@inria.fr>

        PR c++/54427
        * fold-const.c (fold_binary_loc): Use build_zero_cst instead of
        build_int_cst for a potential vector.

2012-10-08  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/atom.md (atom_sse_4): Merge atom_sse_attr attibutes.
        (atom_sse_5): Ditto.

2012-10-08  Marc Glisse  <marc.glisse@inria.fr>

        PR target/54400
        * config/i386/i386.md (type attribute): Add sseadd1.
        (unit attribute): Add support for sseadd1.
        (memory attribute): Likewise.
        * config/i386/athlon.md: Likewise.
        * config/i386/core2.md: Likewise.
        * config/i386/atom.md: Likewise.
        * config/i386/ppro.md: Likewise.
        * config/i386/bdver1.md: Likewise.
        * config/i386/sse.md (sse3_h<plusminus_insn>v2df3): Split into...
        (sse3_haddv2df3): ... expander.
        (*sse3_haddv2df3): ... define_insn. Accept permuted operands.
        (sse3_hsubv2df3): ... define_insn.
        (*sse3_haddv2df3_low): New define_insn.
        (*sse3_hsubv2df3_low): New define_insn.

2012-10-08  Jan Hubicka  <jh@suse.cz>

        * loop-unswitch.c (unswitch_single_loop): Use
        estimated_loop_iterations_int to prevent unswitching when loop
        is known to not roll.
        * tree-ssa-loop-niter.c (estimated_loop_iterations): Do not segfault
        when SCEV is not initialized.
        (max_loop_iterations): Likewise.
        * tree-ssa-loop-unswitch.c (tree_ssa_unswitch_loops): Use
        estimated_loop_iterations_int to prevent unswithcing when
        loop is known to not roll.
        * tree-scalar-evolution.c (scev_initialized_p): New function.
        * tree-scalar-evolution.h (scev_initialized_p): Likewise.
        * loop-unroll.c (decide_peel_once_rolling): Use
        max_loop_iterations_int.
        (unroll_loop_constant_iterations): Update
        nb_iterations_upper_bound and nb_iterations_estimate.
        (decide_unroll_runtime_iterations): Use
        estimated_loop_iterations or max_loop_iterations;
        (unroll_loop_runtime_iterations): fix profile updating.
        (decide_peel_simple): Use estimated_loop_iterations
        and max_loop_iterations.
        (decide_unroll_stupid): Use estimated_loop_iterations
        ad max_loop_iterations.
        * loop-doloop.c (doloop_modify): Use max_loop_iterations_int.
        (doloop_optimize): Likewise.
        * loop-iv.c (iv_number_of_iterations): Use record_niter_bound.
        (find_simple_exit): Likewise.
        * cfgloop.h (struct niter_desc): Remove niter_max.

2012-10-08  Marek Polacek  <polacek@redhat.com>

        PR debug/54831
        * var-tracking.c (vt_add_function_parameter): Use condition instead
        of gcc_assert.

2012-10-08  Dehao Chen  <dehao@google.com>

        * predict.c (predict_loops): Predict for short-circuit conditions.
        (predict_extra_loop_exits): New Function.

2012-10-08  Steven Bosscher  <steven@gcc.gnu.org>

        * bitmap.h (bitmap_and_into): Update prototype.
        * bitmap.c (bitmap_and_into): Return true if the target bitmap
        changed, false otherwise.

        * df.h (df_dump_insn_problem_function): New function type.
        (struct df_problem): Add two functions, to dump just before and
        just after an insn.
        (DF_RD_PRUNE_DEAD_DEFS): New changable flag.
        (df_dump_insn_top, df_dump_insn_bottom): New prototypes.
        * df-core (df_dump_region): Use dump_bb.
        (df_dump_bb_problem_data): New function.
        (df_dump_top, df_dump_bottom): Rewrite using df_dump_bb_problem_data.
        (df_dump_insn_problem_data): New function.
        (df_dump_insn_top, df_dump_insn_bottom): New functions.
        * df-scan.c (problem_SCAN): Add NULL fields for new members.
        * df-problems.c (df_rd_local_compute): Ignore hard registers if
        DF_NO_HARD_REGS is in effect.
        (df_rd_transfer_function): If DF_RD_PRUNE_DEAD_DEFS is in effect,
        prune reaching defs using the LR problem.
        (df_rd_start_dump): Fix dumping of DEFs map.
        (df_rd_dump_defs_set): New function.
        (df_rd_top_dump, df_rd_bottom_dump): Use it.
        (problem_RD): Add NULL fields for new members.
        (problem_LR, problem_LIVE): Likewise.
        (df_chain_bb_dump): New function.
        (df_chain_top_dump): Dump only for artificial DEFs and USEs,
        using df_chain_bb_dump.
        (df_chain_bottom_dump): Likewise.
        (df_chain_insn_top_dump, df_chain_insn_bottom_dump): New functions.
        (problem_CHAIN): Add them as new members.
        (problem_WORD_LR, problem_NOTE): Add NULL fields for new members.
        (problem_MD): Likewise.
        * cfgrtl.c (rtl_dump_bb): Use df_dump_insn_top and df_dump_insn_bottom.
        (print_rtl_with_bb): Likewise.

        * dce.c (init_dce): Use DF_RD_PRUNE_DEAD_DEFS.
        * loop-invariant.c (find_defs): Likewise.
        * loop-iv.c (iv_analysis_loop_init): Likewise.
        * ree.c (find_and_remove_re): Likewise.
        * web.c (web_main): Likewise.

2012-10-08  Jason Merrill  <jason@redhat.com>

        * config/rs6000/rs6000.c (rs6000_code_end): Protect the use of
        ASM_WEAKEN_DECL with #if RS6000_WEAK.

2012-10-08  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/54825
        * tree-ssa-sccvn.c (vn_nary_length_from_stmt): Handle BIT_FIELD_REF.
        (init_vn_nary_op_from_stmt): Likewise.
        * tree-ssa-pre.c (compute_avail): Use vn_nary_op_lookup_stmt.
        * tree-ssa-sccvn.h (sizeof_vn_nary_op): Avoid overflow.

2012-10-08  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-pre.c (postorder_num): New global.
        (compute_antic): Initialize all blocks and adjust for
        generic postorder.
        (my_rev_post_order_compute): Remove.
        (init_pre): Use inverted_post_order_compute.

2012-10-08  Bernd Schmidt  <bernds@codesourcery.com>

        * sched-int.h (schedule_block): Adjust declaration.
        * sched-rgn.c (bb_state_array, bb_state): New static variables.
        (sched_rgn_init): Initialize them.
        (sched_rgn_free): Free them.
        (schedule_region): Save scheduling state for future blocks, and
        pass such state to schedule_block.
        * params.def (PARAM_SCHED_STATE_EDGE_PROB_CUTOFF): New.
        * doc/invoke.texi (--param): Document it.
        * haifa-sched.c (schedule_block): New arg init_state.  Use it to
        initialize state if nonnull.  All callers changed.
        Call advance_one_cycle after scheduling.

2012-10-08  Georg-Johann Lay  <avr@gjlay.de>

        PR target/54854
        * doc/invoke.texi (AVR Options): Remove -mshort-calls.
        * config/avr/avr.opt (-mshort-calls): Remove option.
        * config/avr/avr.h (AVR_HAVE_JMP_CALL): Don't depend on
        TARGET_SHORT_CALLS.

2012-10-08  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54685
        * config/sh/sh.md (one_cmplsi2): Make insn_and_split.  Add manual
        combine matching for an insn sequence where a ge:SI pattern
        can be used.

2012-10-08  Dodji Seketeli  <dodji@redhat.com>

        PR c++/53528 C++11 attribute support
        * plugin.h (register_scoped_attributes): Declare new function.
        * tree.h (enu attribute_flags::ATTR_FLAG_CXX_11): New flag.
        (lookup_scoped_attribute_spec, cxx_11_attribute_p)
        (get_attribute_name, get_attribute_namespace): Declare new functions.
        (struct attribute_spec): Remove const qualifier from the members.
        * tree.c (comp_type_attributes, private_lookup_attribute)
        (lookup_ident_attribute, remove_attribute, merge_attribute)
        (attribute_hash_list, attribute_list_contained): Use
        get_attribute_name.
        * attribs.c (decl_attributes): Don't crash on error_mark_node.
        Forbid c++11 attributes appertaining to type-specifiers.
        (attribute_hash): Remove global variable.
        (attributes_table): New global variable.
        (find_attribute_namespace, register_scoped_attribute): New static
        functions.
        (register_scoped_attributes, lookup_scoped_attribute_spec)
        (cxx11_attribute_p, get_attribute_name, get_attribute_namespace):
        New public functions.
        (init_attributes): Register all the GNU attributes into the "gnu"
        namespace.
        (register_attribute): Use register_scoped_attribute to register
        the attribute into the "gnu" namespace.
        (lookup_attribute_spec): Use lookup_scoped_attribute_spec to
        lookup the attribute in the "gnu" namespace.
        (decl_attributes): Use new get_attribute_namespace and
        lookup_scoped_attribute_spec to consider attribute namespaces when
        looking up attributes.  When operating in c++-11 mode, pass flag
        ATTR_FLAG_CXX11 to the spec handler.

2012-10-08  Georg-Johann Lay  <avr@gjlay.de>

        PR target/54815
        * config/avr/avr.md (*add<mode>3, add<mode>3, addpsi3): Make
        constraint alternative "r,0,r" slighly more expensive.
        (sub<mode>3, andqi3, andhi3, andpsi3, andsi3): Ditto.
        (iorqi3, iorhi3, iorpsi3, iorsi3): Ditto.
        (xorhi3, xorpsi3, xorsi3): Ditto.

2012-10-08  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54760
        * config/sh/sh.md (*mov<mode>_gbr_load, *mov<mode>_gbr_store): New
        insns and accompanying unnamed splits.
        * config/sh/predicates.md (general_movsrc_operand,
        general_movdst_operand): Reject GBR addresses.
        * config/sh/sh-protos.h (sh_find_equiv_gbr_addr): New declaration.
        * config/sh/sh.c (sh_address_cost, sh_legitimate_address_p,
        sh_secondary_reload): Handle GBR addresses.
        (base_reg_disp): New class.
        (sh_find_base_reg_disp, sh_find_equiv_gbr_addr): New functions.

2012-10-08  Hans-Peter Nilsson  <hp@bitrange.com>

        * config/mmix/mmix.c (mmix_output_octa): Don't assume
        HOST_WIDEST_INT_PRINT_HEX starts with "0x".  Instead use
        HOST_WIDE_INT_PRINT_HEX_PURE, falling back to
        HOST_WIDEST_INT_PRINT_UNSIGNED.

2012-10-07  Richard Sandiford  <rdsandiford@googlemail.com>

        * machmode.h (GET_MODE_UNIT_PRECISION): New macro.
        * simplify-rtx.c (simplify_truncation): New function,
        extracted from simplify_subreg and (in small part) from
        simplify_unary_operation_1.
        (simplify_unary_operation_1) <TRUNCATE>: Use it.  Remove sign bit
        test for !TRULY_NOOP_TRUNCATION_MODES_P.
        (simplify_subreg): Use simplify_truncate for lowpart subregs
        where both the inner and outer modes are scalar integers.
        * config/mips/mips.c (mips_truncated_op_cost): New function.
        (mips_rtx_costs): Adjust test for BADDU.
        * config/mips/mips.md (*baddu_di<mode>): Push truncates to operands.

2012-10-07  Jan Hubicka  <jh@suse.cz>

        * ipa-inline-analysis.c (do_estimate_edge_time): Return actual
        time spent by the inlined sequence.
        (do_estimate_edge_growth): Rename to ...
        (do_estimate_edge_time): ... this one; return size of inlined sequence.
        * ipa-inline.h (do_estimate_edge_size): New.
        (do_estimate_edge_growth): Remove.
        (estimate_edge_size): New function.
        (estimate_edge_growth): Use it.

2012-10-07  Jan Hubicka  <jh@suse.cz>

        * lto-cgraph.c (lto_symtab_encoder_new): New parameter FOR_INPUT.
        (lto_symtab_encoder_delete): Update.
        (lto_symtab_encoder_encode): Update.
        (compute_ltrans_boundary): Update.
        (input_symtab): Update.
        * lto-streamer.h (lto_symtab_encoder_new): Update.

2012-10-07  Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/mips-protos.h (mips_split_type): New enum.
        (mips_split_64bit_move_p, mips_split_doubleword_move): Delete.
        (mips_split_move_p, mips_split_move, mips_split_move_insn_p)
        (mips_split_move_insn): Declare.
        * config/mips/mips.c (mips_tuning_info): New variable.
        (mips_load_store_insns): Use mips_split_move_insn_p instead of
        mips_split_64bit_move_p.
        (mips_emit_move_or_split, mips_mult_move_p): New functions.
        (mips_split_64bit_move_p): Rename to...
        (mips_split_move_p): ...this and take a mips_split_type argument.
        Generalize to all moves.  Call mips_mult_move_p.
        (mips_split_doubleword_move): Rename to...
        (mips_split_move): ...this and take a mips_split_type argument.
        Assert that mips_split_move_p holds.
        (mips_insn_split_type, mips_split_move_insn_p, mips_split_move_insn):
        New functions.
        (mips_output_move): Use mips_split_move_p instead of
        mips_split_64bit_move_p.  Handle MULT $0, $0 moves.
        (mips_save_reg): Use mips_emit_move_or_split.
        (mips_sim_reset): Assign to curr_state.  Call targetm.sched.init
        and advance_state.
        (mips_sim_init): Call targetm.sched.init_dfa_pre_cycle_insn and
        targetm.sched.init_dfa_post_cycle_insn, if defined.
        (mips_sim_next_cycle): Assign to curr_state.  Use advance_state
        instead of state_transition.
        (mips_sim_issue_insn): Assign to curr_state.  Use
        targetm.sched.variable_issue to see how many more insns can be issued.
        (mips_seq_time, mips_mult_zero_zero_cost)
        (mips_set_fast_mult_zero_zero_p, mips_set_tuning_info)
        (mips_expand_to_rtl_hook): New functions.
        (TARGET_EXPAND_TO_RTL_HOOK): Define.
        * config/mips/mips.md (move_type): Add imul.
        (type): Map imul move_types to imul.
        (*movdi_32bit, *movti): Add imul alternatives.
        Use mips_split_move_insn_p and mips_split_move_insn instead of
        mips_split_64bit_move_p and mips_split_doubleword_move in move
        splitters.

2012-10-06  Segher Boessenkool  <segher@kernel.crashing.org>

        * config/rs6000/rs6000.c (print_operand) ['A']: Delete.

2012-10-06  Paolo Carlini  <paolo.carlini@oracle.com>

        PR c++/52764
        * ginclude/stdint-wrap.h: In C++11 if __STDC_HOSTED__ define
        __STDC_LIMIT_MACROS and __STDC_CONSTANT_MACROS.
        * ginclude/stdint-gcc.h: In C++11 unconditionally define
        limit and constant macros.

2012-10-06  Paolo Carlini  <paolo.carlini@oracle.com>

        PR c++/54249
        * ginclude/stddef.h: In C++11 mode declare nullptr_t in the global
        namespace.

2012-10-06  Jan Hubicka  <jh@suse.cz>

        PR lto/53831
        PR lto/54776
        * lto-streamer-out.c (produce_symtab): Cleanup; drop v1 API hack.

2012-10-06  Dehao Chen  <dehao@google.com>

        PR debug/54826
        * gimple-low.c (lower_stmt): Set the block for call args.

2012-10-06  Jan Hubicka  <jh@suse.cz>

        * doc/invoke.texi (-fprofile-report): Document.
        * common.opt (-fprofile-report): New option.
        * toplev.c (finalize): Call dump_profile_report.
        * toplev.h (profile_report): Declare.
        * passes.c (profile_record): New static var.
        (check_profile_consistency): New function.
        (dump_profile_record): New function.
        (execute_one_ipa_transform_pass): Call check_profile_consistency.
        (execute_one_pass): Likewise.

2012-10-06  Jan Hubicka  <jh@suse.cz>

        PR lto/54790
        * lto-streamer.h (lto_symtab_register_decl, lto_symtab_get_resolution,
        lto_mark_nothrow_fndecl, lto_fixup_nothrow_decls): Remove.
        * lto-symtab.c (lto_symtab_register_decl): Remove.

2012-10-06  Andreas Schwab  <schwab@linux-m68k.org>

        PR rtl-optimization/54739
        * config/m68k/m68k.md (anddi3, iordi3, xordi3, one_cmpldi2): Remove.

2012-10-06  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54760
        * config/sh/sh.md (define_constants): Add UNSPECV_GBR.
        (get_thread_pointer, set_thread_pointer): New expanders.
        (load_gbr): Rename to store_gbr.  Remove GBR_REG use.
        (store_gbr): New insn.
        * config/sh/sh.c (prepare_move_operands): Use gen_store_gbr instead of
        gen_load_gbr in TLS_MODEL_LOCAL_EXEC case.
        (sh1_builtin_p): New function.
        (signature_args): Add SH_BLTIN_VP.
        (bdesc): Add __builtin_thread_pointer and __builtin_set_thread_pointer.

2012-10-05  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        PR rtl-optimization/54739
        * config/pa/pa.md: Remove DImode and, not and, ior and xor patterns
        for 32-bit targets.  Adjust expanders.

        * config/pa/pa.md: Adjust unamed HImode add insn pattern.

2012-10-05  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.c (builtin_description): Add is_enabled member.
        (shmedia_builtin_p): New function.
        (bdesc): Use shmedia_builtin_p for existing built-ins.
        (sh_media_init_builtins, sh_init_builtins): Merge into single function
        sh_init_builtins.  Add is_enabled checking.  Move variable declarations
        to where they are actually used.
        (sh_media_builtin_decl, sh_builtin_decl): Merge into single function
        sh_builtin_decl.  Add is_enabled checking.
        (sh_expand_builtin): Move variable declarations to where they are
        actually used.

2012-10-05  Jakub Jelinek  <jakub@redhat.com>

        * tree-inline.c (expand_call_inline): Move VAR_DECLs with
        PARM_DECL origins from remapped DECL_INITIAL's BLOCK_VARS
        into id->block's BLOCK_VARS.

        PR debug/54519
        * ipa-split.c (split_function): Add debug args and debug source
        and normal stmts for args_to_skip which are gimple regs.
        * tree-inline.c (copy_debug_stmt): When inlining, adjust source
        debug bind stmts to debug binds of corresponding DEBUG_EXPR_DECL.

2012-10-05  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.md: Fix indentations of insn C snippets.

2012-10-05  Richard Guenther  <rguenther@suse.de>

        PR middle-end/54811
        * tree-ssa-live.c (clear_unused_block_pointer_1): Look at
        DECL_DEBUG_EXPR again.

2012-10-05  Jan Hubicka  <jh@suse.cz>
            Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/33763
        * tree-inline.c (expand_call_inline): Silently ignore always_inline
        attribute for redefined extern inline functions.

2012-10-04  Jan Hubicka  <jh@suse.cz>

        * tree-vectorizer.h (vect_estimate_min_profitable_iters): Remove.
        * tree-vect-loop.c (vect_estimate_min_profitable_iters): Declare here.
        (vect_analyze_loop_operations): Use loop count estimate to rule out
        unprofitable vectorization.
        (vect_estimate_min_profitable_iters): Return
        ret_min_profitable_estimate.

2012-10-05  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/54810
        * tree-vrp.c (register_edge_assert_for_2): Handle
        NAME = (unsigned) NAME2; if (NAME cmp CST) for
        narrowing casts to unsigned integral type like
        NAME = NAME2 & CST2; if (NAME cmp CST) where CST2
        is the max value of the unsigned integral type.

2012-10-04  Jeff Law  <law@redhat.com>

        PR target/50356
        * config/h8300/h8300.c (h8300_rtx_costs): Fix typo in CONST_INT case.

2012-10-04  Jason Merrill  <jason@redhat.com>

        * config/rs6000/rs6000.c (rs6000_code_end): Protect the use of
        ASM_WEAKEN_DECL with #if RS6000_WEAK.

2012-10-04  Basile Starynkevitch  <basile@starynkevitch.net>

        * gengtype.c (walk_type): Emit mark_hook when inside a
        struct of a union member.

2012-10-04  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/predicates.md (flash_operand): New predicate.
        * config/avr/avr.md (reload_in<mode>): Use it in operand 1 instead
        of memory_operand.

2012-10-04  Tobias Burnus  <burnus@net-b.de>

        * gcc.c (record_temp_file, add_sysrooted_prefix, process_command,
        do_self_spec, compare_debug_dump_opt_spec_function): Plug memleaks.
        (do_spec_1): Ditto, fix out-of-bound access.
        * opts.c (common_handle_option): Plug memleak.

2012-10-04  Jason Merrill  <jason@redhat.com>

        * config/darwin.c (darwin_assemble_visibility): Treat
        VISIBILITY_INTERNAL as hidden.

        * config/darwin-c.c (find_subframework_file): Add missing const.
        (framework_construct_pathname): Likewise.

2012-10-04  Florian Weimer  <fweimer@redhat.com>

        * doc/cpp.texi (Pragmas): Document #pragma GCC warning, #pragma
        GCC error.

2012-10-04  Richard Guenther  <rguenther@suse.de>

        PR middle-end/54735
        * tree-ssa-pre.c (do_pre): Make sure to update virtual SSA form before
        cleaning up the CFG.

2012-10-04  Richard Guenther  <rguenther@suse.de>

        PR lto/47799
        * tree-streamer-out.c (write_ts_block_tree_pointers): For
        inlined functions outer scopes write the ultimate origin
        as BLOCK_ABSTRACT_ORIGIN and BLOCK_SOURCE_LOCATION.
        Do not stream the fragment chains.
        * tree-streamer-in.c (lto_input_ts_block_tree_pointers): Likewise.
        * dwarf2out.c (gen_subprogram_die): Handle NULL DECL_INITIAL.
        (dwarf2out_decl): Always output DECL_ABSTRACT function decls.

2012-10-04  Arnaud Charlet  <charlet@adacore.com>

        * dumpfile.h, dumpfile.c: Remove TDI_ada.

2012-10-04  Yuri Rumyantsev  <ysrumyan@gmail.com>

        * config/i386/i386.c (ix86_dep_by_shift_count_body) : Add
        check on reload_completed since it can be invoked before
        register allocation phase in pre-reload schedule.
        (ia32_multipass_dfa_lookahead) : Do not use dfa_lookahead for
        pre-reload schedule to save compile time.
        (ix86_sched_reorder) : Do not perform ready list reordering for
        pre-reload schedule to save compile time.
        (insn_is_function_arg) : New function. Returns true if lhs of insn is
        HW function argument register.
        (add_parameter_dependencies) : New function. Add output dependencies
        for chain of function adjacent arguments if only there is a move to
        likely spilled HW registers. Return first argument if at least one
        dependence was added or NULL otherwise.
        (avoid_func_arg_motion) : New function. Add output or anti dependency
        from insn to first_arg to restrict code motion.
        (add_dependee_for_func_arg) : New function. Avoid cross block motion of
        function argument through adding dependency from the first non-jump
        insn in bb.
        (ix86_dependencies_evaluation_hook) : New function. Hook for
        pre-reload schedule: avoid motion of function arguments passed in
        likely spilled HW registers.
        (ix86_adjust_priority) : New function. Hook for pre-reload schedule:
        set priority of moves from likely spilled HW registers to maximum to
        schedule them as soon as possible.
        (ix86_sched_init_global): Do not perform multipass scheduling for
        pre-reload schedule to save compile time.

2012-10-04  Uros Bizjak  <ubizjak@gmail.com>

        * configure.ac (noexception_flags): Add -fasynchronous-unwind-tables.
        * configure: Regenerate.

2012-10-04  Kaz Kojima  <kkojima@gcc.gnu.org>

        * config/sh/sh.c (sh_can_use_simple_return_p): Return false for
        SHmedia and SHcompact using call cookie.
        * config/sh/sh.md (epilogue): Emit non-inlined return insns for
        SHmedia and SHcompact using call cookie.

2012-10-03  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/51244
        * config/sh/sh.md (*mov_t_msb_neg): New insn and two accompanying
        unnamed split patterns.

2012-10-03  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/50457
        * config/sh/sh.c (parse_validate_atomic_model_option): Handle name
        strings in sh_atomic_model.
        * config/sh/sh.h (TARGET_CPU_CPP_BUILTINS): Move macro implementation
        to ...
        * config/sh/sh-c.c (sh_cpu_cpp_builtins): ... this new function.
        Add __SH1__ and __SH2__ defines.  Add __SH_ATOMIC_MODEL_*__ define.
        * config/sh/sh-protos.h (sh_atomic_model): Add name and cdef_name
        variables.
        (sh_cpu_cpp_builtins): Declare new function.

2012-10-03  Dehao Chen  <dehao@google.com>

        PR middle-end/54782
        * tree-cfg.c (move_block_to_fn): Update lexical block for phi_args.

2012-10-03  Vladimir Makarov  <vmakarov@redhat.com>

        * reginfo.c (max_regno_since_last_resize): New.
        (reg_preferred_class, reg_alternate_class): Add assert.
        (allocate_reg_info): Initialize allocated reg info.
        (resize_reg_info): Make bigger reg_info and initialize new memory.
        (reginfo_init): Initialize max_regno_since_last_resize.
        (setup_reg_classes): Change assert.

2012-10-03  Andrew W. Nosenko <andrew.w.nosenko@gmail.com>

        * config/i386/driver-i386.c (host_detect_local_cpu): Fix logic
        in SSE and YMM state support check for -march=native.

2012-10-03  Nick Clifton  <nickc@redhat.com>

        * config/rx/rx.c (struct decl_chain): New local structure.
        (warned_decls): New local variable.  Contains a stack of decls for
        which warnings have been issued.
        (add_warned_decl): Adds a decl to the stack.
        (already_warned): Returns true if a given decl is on the stack.
        (rx_set_current_function): Issue a warning if multiple fast
        interrupt handlers are defined.
        * config/rx/rx.opt (mwarn-multiple-fast-interrupts): New option.
        * doc/invoke.texi: Document the option.

2012-10-03  Mark Kettenis  <kettenis@openbsd.org>

        * config.gcc (*-*-openbsd4.[3-9]|*-*-openbsd[5-9]*): Set
        default_use_cxa_atexit to yes.

2012-10-03  Jakub Jelinek  <jakub@redhat.com>

        PR rtl-optimization/54792
        * sched-deps.c (find_modifiable_mems): Scan also TAIL insn.

2012-10-02  H.J. Lu  <hongjiu.lu@intel.com>

        PR target/54785
        * doc/invoke.texi: Document -mprefer-avx128.

2012-10-02  Andrew Pinski  <apinski@cavium.com>

        * simplify-rtx.c (simplify_unary_operation_1 <case TRUNCATE>):
        Don't optimize a truncate of a mem if it is a vector mode.

2012-10-02  Alexandre Oliva <aoliva@redhat.com>

        PR debug/54551
        * Makefile.in (VALTRACK_H): Add hash-table.h.
        * valtrack.h: Include hash-table.h.
        (struct dead_debug_global_entry): New.
        (struct dead_debug_hash_descr): New.
        (struct dead_debug_global): New.
        (struct dead_debug): Rename to...
        (struct dead_debug_local): ... this.  Adjust all uses.
        (dead_debug_global_init, dead_debug_global_finish): New.
        (dead_debug_init): Rename to...
        (dead_debug_local_init): ... this.  Adjust all callers.
        (dead_debug_finish): Rename to...
        (dead_debug_local_finish): ... this.  Adjust all callers.
        * valtrack.c (dead_debug_global_init): New.
        (dead_debug_init): Rename to...
        (dead_debug_local_init): ... this.  Take global parameter.
        Save it and initialize used bitmap from it.
        (dead_debug_global_find, dead_debug_global_insert): New.
        (dead_debug_global_replace_temp): New.
        (dead_debug_promote_uses): New.
        (dead_debug_finish): Rename to...
        (dead_debug_local_finish): ... this.  Promote remaining uses.
        (dead_debug_global_finish): New.
        (dead_debug_add): Try to replace global temps first.
        (dead_debug_insert_temp): Support global replacements.
        * dce.c (word_dce_process_block, dce_process_block): Add
        global_debug parameter.  Pass it on.
        (fast_dce): Initialize, pass on and finalize global_debug.
        * df-problems.c (df_set_unused_notes_for_mw): Adjusted.
        (df_create_unused_notes, df_note_bb_compute): Likewise.
        (df_note_compute): Justify local-only dead debug analysis.

2012-10-02  Alexandre Oliva <aoliva@redhat.com>

        PR debug/53135
        * dwarf2out.c (value_format): Use block4 for dw_val_class_loc
        when needed.

2012-10-02  Alexandre Oliva <aoliva@redhat.com>

        PR debug/54177
        * var-tracking.c (vt_add_function_parameter): Bail if
        var_lowpart fails.

2012-10-02  H.J. Lu  <hongjiu.lu@intel.com>

        PR target/54741
        * config/i386/driver-i386.c (XCR_XFEATURE_ENABLED_MASK): New.
        (XSTATE_FP): Likewise.
        (XSTATE_SSE): Likewise.
        (XSTATE_YMM): Likewise.
        (host_detect_local_cpu): Disable AVX, AVX2, FMA, FMA4 and XOP if
        SSE and YMM states aren't supported.

2012-10-02  Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/mips.md (*baddu_si_eb, *baddu_si_el): Merge into...
        (*baddu_si): ...this new pattern.

2012-10-02  Richard Sandiford  <rdsandiford@googlemail.com>

        * ira-int.h (target_ira_int): Add x_ira_useful_class_mode_regs.
        (ira_useful_class_mode_regs): New macro.
        * ira.c (clarify_prohibited_class_mode_regs): Set up
        ira_useful_class_mode_regs.
        * ira-color.c (setup_profitable_hard_regs): Use it to initialise
        profitable_hard_regs.

2012-10-02  Richard Sandiford  <rdsandiford@googlemail.com>

        * ira.h (target_ira): Add x_ira_class_singleton.
        (ira_class_singleton): New macro.
        * ira.c (setup_prohibited_class_mode_regs): Set up ira_class_singleton.
        * ira-build.c (update_conflict_hard_reg_costs): Use
        ira_class_singleton to check for classes with a single
        allocatable register.
        * ira-lives.c (ira_implicitly_set_insn_hard_regs): Likewise.
        (single_reg_class): Likewise.  When more than one class is specified,
        check whether they have the same singleton register.
        (process_single_reg_class_operands): Require single_reg_class
        to return NO_REGS or a class with a single allocatable register.
        Obtain that register from ira_class_singleton.

2012-10-02  Michael Meissner  <meissner@linux.vnet.ibm.com>

        * config/rs6000/rs6000.c (rs6000_option_override_internal): If
        -mcpu=<xxx> is not specified and the compiler is not configured
        using --with-cpu=<xxx>, use the bits from the TARGET_DEFAULT to
        set the initial options.

2012-10-02  Sharad Singhai  <singhai@google.com>

        PR testsuite/54772
        * tree-vect-stmts.c (vectorizable_operation): Add missing return.

2012-10-02  David Edelsohn  <dje.gcc@gmail.com>

        * config/rs6000/rs6000.c (rs6000_option_override_internal): Do not
        set TARGET_ALTIVEC_VRSAVE for TARGET_ELF.
        (rs6000_stack_info): Only set vrsave_mask if TARGET_ALTIVEC_VRSAVE.

2012-10-02  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/54713
        * expr.c (categorize_ctor_elements_1): Don't assume purpose is
        non-NULL.
        * tree-cfg.c (verify_gimple_assign_single): Add verification of
        vector CONSTRUCTORs.
        * tree-ssa-sccvn.c (vn_reference_lookup_3): For VECTOR_TYPE
        CONSTRUCTORs, don't do anything if element type is VECTOR_TYPE,
        and don't check index.
        * tree-vect-slp.c (vect_get_constant_vectors): VIEW_CONVERT_EXPR ctor
        elements first if their type isn't compatible with vector element type.

2012-10-02  Eric Botcazou  <ebotcazou@adacore.com>

        * tree.h (DECL_NONLOCAL_FRAME): New macro.
        * tree-nested.c (get_frame_type): Set DECL_NONLOCAL_FRAME.
        * tree-streamer-in.c (unpack_ts_decl_common_value_fields): Stream in
        DECL_NONLOCAL_FRAME flag.
        * tree-streamer-out.c (pack_ts_decl_common_value_fields): Stream out
        DECL_NONLOCAL_FRAME flag.

2012-10-02  Marc Glisse  <marc.glisse@inria.fr>

        * tree-ssa-forwprop.c (forward_propagate_into_cond): Don't use
        boolean_type_node for vectors.

2012-10-01  Michael Meissner  <meissner@linux.vnet.ibm.com>

        * config/rs6000/rs6000.c (toplevel): Include dumpfile.h.
        (rs6000_density_test): Rework to accommodate 09-30 change by
        Sharad Singhai.

        * config/rs6000/t-rs6000 (rs6000.o): Add dumpfile.h dependency.

2012-10-01  Dehao Chen  <dehao@google.com>

        PR middle-end/54759
        * tree-vect-loop-manip.c (slpeel_make_loop_iterate_ntimes): Use
        LOCATION_LOCUS to compare with UNKNOWN_LOCATION.
        (slpeel_tree_peel_loop_to_edge): Likewise.
        * tree-vectorizer.c (vectorize_loops): Likewise.

2012-10-01  Andrew MacLeod  <amacleod@redhat.com>

        PR target/54087
        * optabs.c (expand_atomic_fetch_op_no_fallback): New.  Factored code
        from expand_atomic_fetch_op.
        (expand_atomic_fetch_op):  Try atomic_{add|sub} operations in terms of
        the other one if direct opcode fails.

2012-10-01  Uros Bizjak  <ubizjak@gmail.com>

        PR rtl-optimization/54457
        * simplify-rtx.c (simplify_subreg):
        Simplify (subreg:M (op:N ((x:N) (y:N)), 0)
        to (op:M (subreg:M (x:N) 0) (subreg:M (x:N) 0)), where
        the outer subreg is effectively a truncation to the original mode M.

2012-10-01  Richard Guenther  <rguenther@suse.de>

        * builtins.def (ATTR_MATHFN_FPROUNDING): Do not use no-vops
        with -frounding-math.
        * builtin-attrs.def (ATTR_PURE_NOTHROW_NOVOPS_LIST): Remove.
        (ATTR_PURE_NOTHROW_NOVOPS_LEAF_LIST): Likewise.

2012-10-01  Eric Botcazou  <ebotcazou@adacore.com>

        * tree.h (copy_mem_ref_info): Delete.
        * tree-ssa-address.c (copy_mem_ref_info): Likewise.
        (maybe_fold_tmr): Copy flags manually.
        * tree-ssa-loop-im.c (simple_mem_ref_in_stmt): Rewrite.

2012-10-01  Marc Glisse  <marc.glisse@inria.fr>

        * simplify-rtx.c (simplify_binary_operation_1) <VEC_SELECT>:
        Detect the identity.
        <VEC_CONCAT>: Handle VEC_SELECTs from the same vector.

2012-10-01  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/50457
        * config/sh/sh.opt (matomic-model): New option.
        (msoft-atomic): Mark as deprecated and alias to
        matomic-model=soft-gusa.
        (mhard-atomic): Delete.
        * config/sh/predicates.md (gbr_displacement): New predicate.
        * config/sh/sh-protos.h (sh_atomic_model): New struct.
        (selected_atomic_model): New declaration.
        (TARGET_ATOMIC_ANY, TARGET_ATOMIC_STRICT, TARGET_ATOMIC_SOFT_GUSA,
        TARGET_ATOMIC_HARD_LLCS, TARGET_ATOMIC_SOFT_TCB,
        TARGET_ATOMIC_SOFT_TCB_GBR_OFFSET_RTX, TARGET_ATOMIC_SOFT_IMASK):
        New macros.
        * config/sh/linux.h (SUBTARGET_OVERRIDE_OPTIONS): Adapt setting to
        default atomic model.
        * config/sh/sh.c (selected_atomic_model_): New global variable.
        (selected_atomic_model, parse_validate_atomic_model_option): New
        functions.
        (sh_option_override): Replace atomic selection checks with call to
        parse_validate_atomic_model_option.
        * config/sh/sh.h (TARGET_ANY_ATOMIC, UNSUPPORTED_ATOMIC_OPTIONS,
        UNSUPPORTED_HARD_ATOMIC_CPU): Delete.
        (DRIVER_SELF_SPECS): Remove atomic checks.
        config/sh/sync.md: Update documentation comments.
        (atomic_compare_and_swap<mode>, atomic_exchange<mode>,
        atomic_fetch_<fetchop_name><mode>, atomic_fetch_nand<mode>,
        atomic_<fetchop_name>_fetch<mode>, atomic_nand_fetch<mode>): Use
        TARGET_ATOMIC_ANY as condition.  Add TARGET_ATOMIC_STRICT check for
        SH4A case.  Handle new TARGET_ATOMIC_SOFT_TCB and
        TARGET_ATOMIC_SOFT_IMASK cases.
        (atomic_test_and_set): Handle new TARGET_ATOMIC_SOFT_TCB and
        TARGET_ATOMIC_SOFT_IMASK cases.
        (atomic_compare_and_swapsi_hard, atomic_exchangesi_hard,
        atomic_fetch_<fetchop_name>si_hard, atomic_fetch_nandsi_hard,
        atomic_<fetchop_name>_fetchsi_hard, atomic_nand_fetchsi_hard):
        Add TARGET_ATOMIC_STRICT check.
        (atomic_compare_and_swap<mode>_hard, atomic_exchange<mode>_hard,
        atomic_fetch_<fetchop_name><mode>_hard, atomic_fetch_nand<mode>_hard,
        atomic_<fetchop_name>_fetch<mode>_hard, atomic_nand_fetch<mode>_hard,
        atomic_test_and_set_hard): Use TARGET_ATOMIC_HARD_LLCS condition.
        (atomic_compare_and_swap<mode>_soft, atomic_exchange<mode>_soft,
        atomic_fetch_<fetchop_name><mode>_soft, atomic_fetch_nand<mode>_soft,
        atomic_<fetchop_name>_fetch<mode>_soft, atomic_nand_fetch<mode>_soft,
        atomic_test_and_set_soft): Append _gusa to the insn names and use
        TARGET_ATOMIC_SOFT_GUSA as condition.
        (atomic_compare_and_swap<mode>_soft_tcb,
        atomic_exchange<mode>_soft_tcb,
        atomic_fetch_<fetchop_name><mode>_soft_tcb,
        atomic_fetch_nand<mode>_soft_tcb,
        atomic_<fetchop_name>_fetch<mode>_soft_tcb,
        atomic_nand_fetch<mode>_soft_tcb, atomic_test_and_set_soft_tcb):
        New insns.
        (atomic_compare_and_swap<mode>_soft_imask,
        atomic_exchange<mode>_soft_imask,
        atomic_fetch_<fetchop_name><mode>_soft_imask,
        atomic_fetch_nand<mode>_soft_imask,
        atomic_<fetchop_name>_fetch<mode>_soft_imask,
        atomic_nand_fetch<mode>_soft_imask, atomic_test_and_set_soft_imask):
        New insns.
        * doc/invoke.texi (SH Options): Document new matomic-model option.
        Remove msoft-atomic and mhard-atomic options.

2012-10-01  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        PR target/54746
        * config/s390/s390.c (s390_option_override): Add missing break.

2012-09-30  Sharad Singhai  <singhai@google.com>

        * dumpfile.c: New file with parts moved from tree-dump.c.
        (pflags): New variable.
        (alt_flags): Ditto.
        (alt_dump_file): Ditto.
        (dump_files):  Update to include additional fields.
        (struct dump_option_value_info): Add additional entries.
        (get_dump_file_name): Use command line filename if available.
        (dump_open_alternate_stream): New function.
        (dump_loc): Ditto.
        (dump_gimple_stmt): Ditto.
        (dump_gimple_stmt_loc): Ditto.
        (dump_generic_expr): Ditto.
        (dump_generic_expr_loc): Ditto.
        (dump_printf): Ditto.
        (dump_printf_loc): Ditto.
        (dump_start): Ditto.
        (dump_finish): Ditto.
        (dump_begin): Ditto.
        (dump_enabled_p): Return true if either of the dump types is enabled.
        (dump_initialized_p): Return true if either type of dump is
        initialized.
        (dump_end): Do not close standard streams.
        (dump_enable_all): Handle filenames for regular dumps.
        (dump_switch_p_1): Handle command-line dump filenames.
        (opt_info_enable_all): New function.
        (opt_info_switch_p_1): Ditto.
        (opt_info_switch_p): Ditto.
        (dump_kind_p): Ditto.
        (dump_basic_block): Ditto.
        (dump_combine_total_stats): Ditto.
        (dump_remap_tree_vectorizer_verbose): Ditto.
        * gimple-pretty-print.h: Rename dump_gimple_stmt to
        pp_gimple_stmt_1.  All callers updated.

2012-09-30  Sharad Singhai  <singhai@google.com>

        * doc/invoke.texi: Add documentation for the new -fopt-info option.
        * tree-dump.c: Move general dump file related functionality into
        dumpfile.c. Remove unneeded headers.
        * tree-dump.h: Move function declarations into dumpfile.h.
        * dumpfile.h: Include "line-map.h". Add defines for MSG flags.
        (struct dump_file_info): Move here from tree-dump.c.  Rename flags
        to pflags, state to pstate, stream to pstream, filename to
        pfilename. All callers updated. Add alt_flags, alt_state,
        alt_filenmae, alt_stream.
        * tree-vectorizer.c: Include "dumpfile.h". Remove vect_dump.
        (vect_set_dump_settings): Remove.
        (vect_print_dump_info): Ditto.
        * tree-vectorizer.h: Remove declaration of vect_dump and
        vect_print_dump_info.
        * tree-vect-loop.c: Include "dumpfile.h". Use new dump style.
        * tree-vect-data-refs.c: Ditto.
        * tree-vect-stmts.c: Ditto.
        * tree-vect-slp.c: Ditto.
        * tree-vect-patterns.c: Ditto.
        * tree-vect-loop-manip.c: Ditto.
        * opts.c (vect_set_verbosity_level): Remove.
        (common_handle_option): Handle -fopt-info flag. Deprecate
        -ftree-vectorizer-verbose.
        * tree-parloops.c (gather_scalar_reductions): Remove reference to
        vect_dump.
        * flag-types.h: Remove vect_verbosity_levels.
        * common.opt: Add -fopt-info. Deprecate -ftree-vectorizer-verbose.
        * opts-global.c (dump_remap_tree_vectorizer_verbose): New function.
        (handle_common_deferred_options): Handle -fopt-info and
        -ftree-vectorizer-verbose.
        * Makefile.in: Add dumpfile.o.
        (tree-dump.o): Update dependencies.
        (tree-vect-loop.o): Ditto.
        (tree-vect-loop-manip.o): Ditto.
        (tree-vect-slp.o): Ditto.
        (tree-vect-stmts.o): Ditto.
        (tree-vectorizer.o): Ditto.
        (opts.o): Ditto.
        * passes.c (finish_optimization_passes): Instead of using
        dump_begin/dump_end, use dump_start/dump_finish. Do not use dump_file.
        (pass_init_dump_file): Ditto.

2012-09-30  Joern Rennecke  <joern.rennecke@embecosm.com>

        PR rtl-optimization/38449:
        * hooks.c (hook_bool_const_rtx_const_rtx_true): New function.
        * hooks.h (hook_bool_const_rtx_const_rtx_true): Declare.
        * target.def: Merge in definitions and documentation for
        TARGET_CAN_FOLLOW_JUMP.
        * doc/tm.texi.in: Add documentation locations for the above.
        * doc/tm.texi: Regenerate.
        * reorg.c (follow_jumps): New parameters jump and crossing.
        Changed all callers.

2012-09-30  Eric Botcazou  <ebotcazou@adacore.com>

        * reorg.c (relax_delay_slots): Use delay_insn consistently.

        * config/sparc/sparc.c (gen_stack_pointer_dec): Delete.
        (sparc_expand_epilogue): Use gen_stack_pointer_inc and adjust.
        (sparc_flat_expand_epilogue): Likewise.
        (emit_and_preserve): Likewise.
        (sparc_fold_builtin): Fix thinko in latest change.

2012-09-30  Andreas Schwab  <schwab@linux-m68k.org>

        * config/m68k/m68k.md: Add names to bitfield insert and extract
        insns.
        (*insv_8_16_reg): Remove constraints and conditions that assume
        that operand 0 could be a MEM.
        (*extzv_8_16_reg, *extv_8_16_reg): Likewise, for operand 1.

2012-09-30  Jan Hubicka  <jh@suse.cz>

        * cfgloop.c (scale_loop_profile): Move to...
        * cfgloopmanip.c (scale_loop_profile): .. here; use
        scale_loop_frequencies.
        (loopify): Use RDIV.

2012-09-28  Jan Hubicka  <jh@suse.cz>

        * tree-call-cdce.c (shrink_wrap_one_built_in_call): Update profile.

2012-09-28  Jan Hubicka  <jh@suse.cz>

        * function.c (dup_block_and_redirect): Update profile.

2012-09-29  Andreas Tobler  <andreast@fgznet.ch>

        * config.gcc: Replace 'host' with 'target' when configuring for
        powerpc64*-*-freebsd.

2012-09-29  Marc Glisse  <marc.glisse@inria.fr>

        * tree.c (truth_type_for): New function.
        * tree.h (truth_type_for): Declare.
        * gimple-fold.c (and_comparisons_1): Call it.
        (or_comparisons_1): Likewise.
        * tree-ssa-forwprop.c (forward_propagate_into_cond): Don't use
        boolean_type_node for vectors.

2012-09-28  Jan Hubicka  <jh@suse.cz>

        * basic-block.h (RDIV): Define.
        (EDGE_FREQUENCY): Simplify.
        (check_probability, combine_probabilities, apply_probability,
        inverse_probability): New.
        * cfgloop.c (scale_loop_profile): New function.
        * cfgloop.h (scale_loop_profile): Declare.
        (slpeel_add_loop_guard): Add probability parameter.
        (set_prologue_iterations): Add probability parameter.
        (slpeel_tree_peel_loop_to_edge): Add bound1 and bound2 parameters;
        update probabilities correctly.
        (vect_do_peeling_for_alignment, vect_gen_niters_for_prolog_loop): New.

2012-09-20  Bernd Schmidt  <bernds@codesourcery.com>

        PR bootstrap/54688
        * sched-deps.c (parse_add_or_inc): Remove MINUS handling.  Take
        STACK_GROWS_DOWNWARD into account.

2012-09-28  Jakub Jelinek  <jakub@redhat.com>

        PR target/54716
        * config/i386/predicates.md (nonimmediate_or_const_vector_operand):
        New predicate.
        * config/i386/i386.c (ix86_expand_vector_logical_operator): New
        function.
        * config/i386/i386-protos.h (ix86_expand_vector_logical_operator): New
        prototype.
        * config/i386/sse.md (<code><mode>3 VI logic): Use it.

        PR tree-optimization/54713
        * fold-const.c (vec_cst_ctor_to_array): Give up if vector CONSTRUCTOR
        has vector elements.
        (fold_ternary_loc) <case BIT_FIELD_REF>: Likewise.
        * tree-vect-generic.c (vector_element): Don't rely on CONSTRUCTOR elts
        indexes.  Use BIT_FIELD_REF if CONSTRUCTOR has vector elements.
        (lower_vec_perm): Use NULL_TREE CONSTRUCTOR indexes.

2012-09-28  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.md (adjust_len): Add lpm.
        (reload_in<mode>): Use avr_out_lpm for output.  Use "lpm" for
        adjust_len.
        * config/avr/avr-protos.h (avr_out_lpm): New prototype.
        * config/avr/avr.c (avr_out_lpm): Make global.
        (adjust_insn_length): Handle ADJUST_LEN_LPM.

2012-09-28  Richard Guenther  <rguenther@suse.de>

        PR lto/47799
        * lto-streamer-out.c (tree_is_indexable): Make PARM_DECLs global.
        (lto_output_tree_ref): Handle references to them.
        (output_function): Do not output function arguments again.
        * lto-streamer-in.c (input_function): Do not input arguments
        again, nor overwrite them.

2012-09-28  Richard Guenther  <rguenther@suse.de>

        * cgraph.h (symtab_node_base): Re-order and pack fields.

2012-09-28  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.c (avr_pgm_check_var_decl): Fix non-error diagnostic.

2012-09-28  Georg-Johann Lay  <avr@gjlay.de>

        PR rtl-optimization/52543
        * config/avr/avr.c (avr_mode_dependent_address_p): Return true for
        all non-generic address spaces.
        (TARGET_SECONDARY_RELOAD): New hook define to...
        (avr_secondary_reload): ...this new static function.
        * config/avr/avr.md (reload_in<mode>): New insns.

        Undo r185605 (mostly):
        * config/avr/avr-protos.h (avr_load_lpm): Remove.
        * config/avr/avr.c (avr_load_libgcc_p): Don't restrict to __flash
        loads.
        (avr_out_lpm): Also handle loads > 1 byte.
        (avr_load_lpm): Remove.
        (avr_find_unused_d_reg): New static function.
        (avr_out_lpm_no_lpmx): New static function.
        (adjust_insn_length): Remove ADJUST_LEN_LOAD_LPM.
        * config/avr/avr.md (unspec): Remove UNSPEC_LPM.
        (load_<mode>_libgcc): Use MEM instead of UNSPEC_LPM.
        (load_<mode>, load_<mode>_clobber): Remove.
        (mov<mode>): For multi-byte move from non-generic
        16-bit address spaces: Expand to *mov<mode> again.
        (load<mode>_libgcc): New expander.
        (split-lpmx): Remove split.

2012-09-27  Dehao Chen  <dehao@google.com>

        * tree.h (tree_constructor): Remove IS_UNKNOWN_LOCATION.
        (extern void protected_set_expr_location): Likewise.
        (function_args_iter_next): Likewise.
        (inlined_function_outer_scope_p): Likewise.
        * input.h (IS_UNKNOWN_LOCATION): Likewise.
        * fold-const.c (expr_location_or): Likewise.
        * lto-cgraph.c (output_node_opt_summary): Likewise.
        * dwarf2out.c (add_src_coords_attributes): Likewise.
        * tree-eh.c (lower_try_finally_dup_block): Likewise.
        * profile.c (branch_prob):
        * cfgexpand.c (expand_gimple_cond): Likewise.
        (expand_gimple_basic_block): Likewise.
        (construct_exit_block): Likewise.
        (gimple_expand_cfg): Likewise.
        * cfgcleanup.c (try_forward_edges): Likewise.
        * tree-ssa-live.c (remove_unused_scope_block_p): Likewise.
        (dump_scope_block): Likewise.
        * ipa-prop.c (ipa_write_jump_function): Likewise.
        * rtl.h (extern void rtl_check_failed_flag): Likewise.
        * gimple.h (gimple_set_location): Likewise.
        (gimple_has_location): Likewise.
        * cfgrtl.c (unique_locus_on_edge_between_p): Likewise.
        (force_nonfallthru_and_redirect): Likewise.
        (fixup_reorder_chain): Likewise.
        (cfg_layout_merge_blocks): Likewise.

2012-09-27  Meador Inge  <meadori@codesourcery.com>

        * gcc-ar.c (main): Handle the returning of the sub-process error
        code correctly.

2012-09-27  Ulrich Weigand  <ulrich.weigand@linaro.org>

        * lower-subreg.c (enum classify_move_insn): Rename
        SIMPLE_PSEUDO_REG_MOVE to DECOMPOSABLE_SIMPLE_MOVE.
        (find_decomposable_subregs): Update.
        (decompose_multiword_subregs): Add DECOMPOSE_COPIES parameter.
        Only mark pseudo-to-pseudo copies as DECOMPOSABLE_SIMPLE_MOVE
        if that parameter is true.
        (rest_of_handle_lower_subreg): Call decompose_multiword_subregs
        with DECOMPOSE_COPIES false.
        (rest_of_handle_lower_subreg2): Call decompose_multiword_subregs
        with DECOMPOSE_COPIES true.

2012-09-27  Marek Polacek  <polacek@redhat.com>

        * doc/gcov.texi (Gcov Data Files): Fix a typo.

2012-09-27  Jakub Jelinek  <jakub@redhat.com>

        PR target/54703
        * simplify-rtx.c (simplify_binary_operation_1): Perform
        (x - (x & y)) -> (x & ~y) optimization only for integral modes.

2012-09-27  Marc Glisse  <marc.glisse@inria.fr>

        PR c/53024
        PR c++/54427
        * doc/extend.texi (Vector Extensions): C++ improvements.
        Power of 2 size requirement.

2012-09-27  Richard Guenther  <rguenther@suse.de>

        PR lto/54709
        * lto-symtab.c (resolution_guessed_p): Remove.
        (set_resolution_guessed): Likewise.
        (lto_symtab_register_decl): Remove assert.
        (lto_symtab_resolve_symbols): Do not alter symbol resolutions
        and return the prevailing symbol, checking for multiple prevailing
        symbols here.
        (lto_symtab_merge_decls_1): Use the result from
        lto_symtab_resolve_symbols.  Do not alter symbol resolutions.

2012-09-26  Steve Ellcey  <sellcey@mips.com>

        PR web/54711
        * doc/install.texi: Fix example.

2012-09-26  Dehao Chen  <dehao@google.com>

         * tree-ssa-live.c (clear_unused_block_pointer): Use explicitit (void)
        for function parameter.
        (remove_unused_locals): Don't use LOCATION_BLOCK if it is NULL.

2012-09-26  Oleg Endo  <olegendo@gcc.gnu.org>

        * doc/extend.texi (bswap Builtins): Change signed types to unsigned
        types.

2012-09-26  Ian Lance Taylor  <iant@google.com>

        * diagnostic.c (bt_callback): Cast pc when calling fprintf.

2012-09-26  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

        PR tree-optimization/54674
        * gimple-ssa-strength-reduction.c (analyze_increments): Don't
        introduce a multiplication with a pointer operand.

2012-09-26  Georg-Johann Lay  <avr@gjlay.de>

        PR middle-end/54635
        * doc/tm.texi.in (TARGET_MODE_DEPENDENT_ADDRESS_P): Document new
        parameter addrspace.
        * doc/tm.texi: Regenerate.
        * target.def (mode_dependent_address_p): Add addr_space_t parameter.
        * targhooks.h (default_mode_dependent_address_p): Ditto.
        * targhooks.c (default_mode_dependent_address_p): Ditto.
        * expr.c (convert_move): Pass address space to
        mode_dependent_address_p.
        * combine.c (combine_simplify_rtx): Ditto.
        (make_extraction): Ditto.
        (simplify_shift_const_1): Ditto.
        (gen_lowpart_for_combine): Ditto.
        * lower-subreg.c (simple_move_operand): Ditto.
        * recog.c (simplify_while_replacing): Ditto.
        (offsettable_address_addr_space_p): Ditto.
        (mode_dependent_address_p): Ditto.
        * simplify-rtx.c (simplify_unary_operation_1): Ditto.
        (simplify_subreg): Ditto.
        * config/m68k/m68k.md: Ditto.
        * config/vax/vax.md: Ditto.
        * config/vax/constraints.md (Q): Ditto.
        * config/vax/predicates.md (indexed_memory_operand): Ditto.
        * config/alpha/alpha.c (alpha_mode_dependent_address_p): Add
        unused addr_space_t parameter.
        * config/avr/avr.c (avr_mode_dependent_address_p): Ditto.
        * config/h8300/h8300.c (h8300_mode_dependent_address_p): Ditto.
        * config/m32r/m32r.c (m32r_mode_dependent_address_p): Ditto.
        * config/rs6000/rs6000.c (rs6000_mode_dependent_address_p): Ditto.
        * config/rx/rx.c (rx_mode_dependent_address_p): Ditto.
        * config/sparc/sparc.c (sparc_mode_dependent_address_p): Ditto.
        * config/stormy16/stormy16.c (xstormy16_mode_dependent_address_p):
        Ditto.
        * config/vax/vax.c (vax_mode_dependent_address_p): Ditto.
        * config/xtensa/xtensa.c (xtensa_mode_dependent_address_p): Ditto.

2012-09-26  Christophe Lyon <christophe.lyon@linaro.org>

        * tree-ssa-math-opts.c (bswap_stats): Add found_16bit field.
        (execute_optimize_bswap): Add support for builtin_bswap16.

2012-09-26  Richard Guenther  <rguenther@suse.de>

        * tree.h (DECL_IS_BUILTIN): Compare LOCATION_LOCUS.

2012-09-26  Ian Lance Taylor  <iant@google.com>

        * diagnostic.c: Include "demangle.h" and "backtrace.h".
        (bt_stop): New static array.
        (bt_callback, bt_err_callback): New static functions.
        (diagnostic_action_after_output): Call backtrace_full for DK_ICE.
        * Makefile.in (BACKTRACE): New variable.
        (BACKTRACEINC, LIBBACKTRACE): New variables.
        (BACKTRACE_H): New variable.
        (LIBDEPS, LIBS): Add $(LIBBACKTRACE).
        (INCLUDES): Add $(BACKTRACEINC).
        (diagnostic.o): Depend upon $(DEMANGLE_H) and $(BACKTRACE_H).

2012-09-25  Segher Boessenkool  <segher@kernel.crashing.org>

        PR target/51274
        PR target/53087
        * config/rs6000/rs6000.md (ne0si): Remove unnecessary
        earlyclobber.  Merge with...
        (ne0di): ... to...
        (ne0_<mode>): New.
        (plus_ne0si): Merge with...
        (plus_ne0di): ... to...
        (plus_ne0_<mode>): New.
        (compare_plus_ne0si): Merge with...
        (compare_plus_ne0di)... to...
        (compare_plus_ne0_<mode>): New.
        (compare_plus_ne0_<mode>_1): New.
        (plus_ne0si_compare): Merge with...
        (plus_ne0di_compare)... to...
        (plus_ne0_<mode>_compare): New.

2012-09-25  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54089
        * config/sh/constraints.md (Jhb): New constraint.
        * config/sh/predicates.md (negt_reg_shl31_operand): New predicate.
        * config/sh/sh.md (rotrsi3): New expander.
        (rotrsi3_1, *rotrsi3_1, *rotlsi3_1): New insns.
        (rotlsi3, rotlhi3): Use const_int_operand predicate instead of
        immediate_operand and remove CONST_INT_P checks in expansion code.
        (*rotcr): Cleanup variable usage.  Handle preceding nott insn.  Add
        split with swapped operands.
        (*rotcr_neg_t, *movt_msb, *negt_msb): New insns and splits.

2012-09-25  Aldy Hernandez  <aldyh@redhat.com>

        PR middle-end/53850
        * trans-mem.c (expand_call_tm): Handle late built built-ins.

2012-09-25  Georg-Johann Lay  <avr@gjlay.de>

        PR other/54701
        * config/avr/avr-log.c (avr_double_int_pop_digit): Rewrite using
        double_int::udivmod.

2012-09-25  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.c (avr_set_current_function): Check cfun->machine
        to be non-NULL.

2012-09-25  Georg-Johann Lay  <avr@gjlay.de>

        PR target/54641
        * config/avr/t-avr: Use ALL_COMPILERFLAGS instead of ALL_CFLAGS
        for sources compiled with COMPILER.

2012-09-25  Richard Guenther  <rguenther@suse.de>

        PR lto/54625
        * lto-symtab.c (lto_symtab_merge_cgraph_nodes_1): Do not merge
        cgraph nodes for builtins.

2012-09-25  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/54676
        * tree-vrp.c (set_and_canonicalize_value_range): Handle
        one bit precision properly.

        PR other/54692
        * configure.ac (CFLAGS, CXXFLAGS): Remove -Ofast or -Og properly.
        * configure: Regenerated.

2012-09-25  Georg-Johann Lay  <avr@gjlay.de>

        PR other/54701
        * config/avr/avr.c (avr_map_decompose): Use double_int::from_uhwi
        instead of uhwi_to_double_int.

2012-09-25  Richard Guenther  <rguenther@suse.de>

        * lto-symtab.c (lto_symtab_merge_decls_1): Properly merge
        all of the chain.

2012-09-25  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53663
        * tree-ssa-sccvn.c (vn_reference_lookup_3): Conditional
        native encode/interpret translation on VN_WALKREWRITE.

2012-09-24  Dehao Chen  <dehao@google.com>

        * tree-cfg.c (move_stmt_op): Reset the expr block only when necessary.
        (move_block_to_fn): Reset the edge's goto block even
        when the goto locus is unknown.

2012-09-24  Lawrence Crowl  <crowl@google.com>

        * double-int.h (double_int::from_pair): New.
        (double_int::wide_mul_with_sign): New.
        (double_int::sub_with_overflow): New.
        (double_int::neg_with_overflow): New.
        (double_int::divmod_with_overflow): New.
        (shwi_to_double_int): Remove.
        (uhwi_to_double_int): Remove.
        (double_int_to_shwi): Remove.
        (double_int_to_uhwi): Remove.
        (double_int_fits_in_uhwi_p): Remove.
        (double_int_fits_in_shwi_p): Remove.
        (double_int_fits_in_hwi_p): Remove.
        (double_int_mul): Remove.
        (double_int_mul_with_sign): Remove.
        (double_int_add): Remove.
        (double_int_sub): Remove.
        (double_int_neg): Remove.
        (double_int_div): Remove.
        (double_int_sdiv): Remove.
        (double_int_udiv): Remove.
        (double_int_mod): Remove.
        (double_int_smod): Remove.
        (double_int_umod): Remove.
        (double_int_divmod): Remove.
        (double_int_sdivmod): Remove.
        (double_int_udivmod): Remove.
        (double_int_multiple_of): Remove.
        (double_int_setbit): Remove.
        (double_int_ctz): Remove.
        (double_int_not): Remove.
        (double_int_ior): Remove.
        (double_int_and): Remove.
        (double_int_and_not): Remove.
        (double_int_xor): Remove.
        (double_int_lshift): Remove.
        (double_int_rshift): Remove.
        (double_int_lrotate): Remove.
        (double_int_rrotate): Remove.
        (double_int_negative_p): Remove.
        (double_int_cmp): Remove.
        (double_int_scmp): Remove.
        (double_int_ucmp): Remove.
        (double_int_max): Remove.
        (double_int_smax): Remove.
        (double_int_umax): Remove.
        (double_int_min): Remove.
        (double_int_smin): Remove.
        (double_int_umin): Remove.
        (double_int_ext): Remove.
        (double_int_sext): Remove.
        (double_int_zext): Remove.
        (double_int_mask): Remove.
        (double_int_max_value): Remove.
        (double_int_min_value): Remove.
        (double_int_zero_p): Remove.
        (double_int_one_p): Remove.
        (double_int_minus_one_p): Remove.
        (double_int_equal_p): Remove.
        (double_int_popcount): Remove.
        (extern add_double_with_sign): Remove.
        (#define add_double): Remove.
        (extern neg_double): Remove.
        (extern mul_double_with_sign): Remove.
        (extern mul_double_wide_with_sign): Remove.
        (#define mul_double): Remove.
        (extern lshift_double): Remove.
        (extern div_and_round_double): Remove.
        * double-int.c (add_double_with_sign): Make static.
        (#defined add_double): Localized from header.
        (neg_double): Make static.
        (mul_double_with_sign): Make static.
        (mul_double_wide_with_sign): Make static.
        (#defined mul_double): Localized from header.
        (lshift_double): Make static.
        (div_and_round_double): Make static.
        (double_int::wide_mul_with_sign): New.
        (double_int::sub_with_overflow): New.
        (double_int::neg_with_overflow): New.
        (double_int::divmod_with_overflow): New.
        * emit-rtl.c (init_emit_once): Change to new double_int API.
        * explow.c (plus_constant): Likewise.
        * expmed.c (choose_multiplier): Likewise.
        * fold-const.c (#define OVERFLOW_SUM_SIGN): Remove.
        (int_const_binop_1): Change to new double_int API.
        (fold_div_compare): Likewise.
        (maybe_canonicalize_comparison): Likewise.
        (pointer_may_wrap_p): Likewise.
        (fold_negate_const): Likewise.
        (fold_abs_const): Likewise.
        * simplify-rtx.c (simplify_const_unary_operation): Likewise.
        (simplify_const_binary_operation): Likewise.
        * tree-chrec.c (tree_fold_binomial): Likewise.
        * tree-vrp.c (extract_range_from_binary_expr_1): Likewise.
        * config/sparc/sparc.c (sparc_fold_builtin): Likewise.
        * config/avr/avr.c (avr_double_int_push_digit): Likewise.
        (avr_map): Likewise.
        (avr_map_decompose): Likewise.
        (avr_out_insert_bits): Likewise.

2012-09-24  Janis Johnson  <janisjo@codesourcery.com>

        * doc/sourcebuild.texi (Selectors): Document the use of target
        and xfail used together.

2012-09-24  Richard Guenther  <rguenther@suse.de>

        PR middle-end/54632
        * tree-ssa-live.c (clear_unused_block_pointer_1): Do not
        handle DECL_DEBUG_EXPR_IS_FROM here...
        (clear_unused_block_pointer): ... but here when walking all
        local decls.

2012-09-24  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/54684
        * tree-ssa-ccp.c (optimize_unreachable): Properly update stmts.

2012-09-24  Marc Glisse  <marc.glisse@inria.fr>

        * tree-ssa-forwprop.c: Include tree-ssa-propagate.h.
        (simplify_bitfield_ref): Handle constructors.
        * Makefile.in (tree-ssa-forwprop.o): Depend on tree-ssa-propagate.h.

2012-09-24  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-pre.c (bitmap_find_leader, create_expression_by_pieces,
        find_or_generate_expression): Remove dominating stmt argument.
        (find_leader_in_sets, phi_translate_1, bitmap_find_leader,
        create_component_ref_by_pieces_1, create_component_ref_by_pieces,
        do_regular_insertion, do_partial_partial_insertion): Adjust.
        (compute_avail): Do not set uids.

2012-09-24  Eric Botcazou  <ebotcazou@adacore.com>

        * tree-streamer-in.c (unpack_ts_type_common_value_fields): Stream in
        TYPE_NONALIASED_COMPONENT flag.
        * tree-streamer-out.c (pack_ts_type_common_value_fields): Stream out
        TYPE_NONALIASED_COMPONENT flag.

2012-09-24  Jia Liu  <proljc@gmail.com>

        * doc/lto.texi: Separate sections.
        * doc/plugins.texi: Likewise.

2012-09-24  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52173
        * gimple.c (gimple_copy): Properly mark the copy modified
        if SSA operands are present.

2012-09-23  Eric Botcazou  <ebotcazou@adacore.com>

        PR tree-optimization/54669
        * tree-ssa-loop-ivcanon.c (propagate_into_all_uses): Invoke
        maybe_clean_or_replace_eh_stmt on the modified use statements.

2012-09-23  Marc Glisse  <marc.glisse@inria.fr>

        * expr.c (do_store_flag): Remove duplicated code.

2012-09-22  Segher Boessenkool  <segher@kernel.crashing.org>

        * config/rs6000/predicates.md (altivec_register_operand,
        vsx_register_operand, vfloat_operand, vint_operand,
        vlogical_operand, gpc_reg_operand, cc_reg_operand,
        cc_reg_not_cr0_operand, cc_reg_not_micro_cr0_operand):
        If op is a SUBREG, consider its SUBREG_REG instead.

2012-09-22  Uros Bizjak  <ubizjak@gmail.com>

        * optabs.c (prepare_cmp_insn): Expand comparison of the result
        of memcmp through generic comparison expansion code.

2012-09-21  Anthony Green  <green@moxielogic.com>

        * config/moxie/moxie.opt: Add -mno-crt0 option.
        * config/moxie/moxie.h (STARTFILE_SPEC): Handle -mno-crt0 option.
        * doc/invoke.texi (Option Summary): Document -mno-crt0 option.

2012-09-21  Jack Howarth  <howarth@bromo.med.uc.edu>

        PR bootstrap/54642
        * Makefile.in (lto-symtab.o): Remove gt-lto-symtab.h dependency.

2012-09-21  Dehao Chen  <dehao@google.com>

        PR go/54649
        * tree-eh.c (lower_try_finally_dup_block): Set the correct block for
        stmts in the duplicated EH block.

2012-09-21  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/54647
        * tree-ssa-pre.c (compute_avail): Do not put COND_EXPR
        or VEC_COND_EXPR into EXP_GEN again.

2012-09-21  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/54629
        * tree-loop-distribution.c (classify_partition): Free loop nest only
        after freeing ddr.  Free ddr and loop nest also if successful.

2012-09-21  Matthias Klose  <doko@ubuntu.com>

        * config/arm/arm.c (arm_mangle_type): Don't warn anymore that
        4.4 has changed the `va_list' mangling.

2012-09-21  Eric Botcazou  <ebotcazou@adacore.com>

        PR rtl-optimization/54290
        PR rtl-optimization/54644
        * reload1.c (choose_reload_regs): Fix thinko in previous change.

2012-09-20  Segher Boessenkool  <segher@kernel.crashing.org>

        * config/rs6000/rs6000.md (define_split for plus_eqsi):
        Fix output pattern.

2012-09-20  Eric Botcazou  <ebotcazou@adacore.com>

        * reload1.c (choose_reload_regs): Add missing #ifdef/#endif pair.

2012-09-20  Bernd Schmidt  <bernds@codesourcery.com>

        PR bootstrap/54643
        * haifa-sched.c (schedule_block): Skip find_modifiable_mems if using
        SCHED_PRESSURE_MODEL.

2012-09-20  Joern Rennecke  <joern.rennecke@embecosm.com>

        * rtlanal.c (dead_or_set_regno_p): Fix COND_EXEC handling.

2012-09-20  Marek Polacek  <polacek@redhat.com>

        * tree-ssa-operands.c (get_expr_operands): Merge identical cases.

2012-09-20  Marek Polacek  <polacek@redhat.com>

        * tree-ssa-threadupdate.c (mark_threaded_blocks): Don't cast XNEWVEC's
        result.
        (create_edge_and_update_destination_phis): Likewise.

2012-09-20  Martin Jambor  <mjambor@suse.cz>

        * function.c (push_cfun): Check old current_function_decl matches
        old cfun, set new current_function_decl to the decl of the new cfun.
        (push_struct_function): Likewise.
        (pop_cfun): Likewise.
        (allocate_struct_function): Move call to
        invoke_set_current_function_hook to the end of the function.
        * cfgexpand.c (estimated_stack_frame_size): Do not set and restore
        current_function_decl.
        * cgraph.c (cgraph_release_function_body): Likewise.
        * cgraphunit.c (cgraph_process_new_functions): Likewise.
        (cgraph_add_new_function): Likewise.
        (cgraph_analyze_function): Likewise.
        (assemble_thunk): Set cfun to NULL at the end.
        (expand_function): Move call to set_cfun downwards.
        * gimple-low.c (record_vars_into): Only check current_function_decl
        before possibly doing push_cfun.
        * gimplify.c (gimplify_function_tree): Do not set and restore
        current_function_decl.
        * ipa-inline-analysis.c (compute_inline_parameters): Likewise.
        (inline_analyze_function): Likewise.
        * ipa-prop.c (ipa_analyze_node): Likewise.
        * ipa-pure-const.c (analyze_function): Likewise.
        * lto-streamer-in.c (lto_input_function_body): Do not set
        current_function_decl.
        * lto-streamer-out.c (output_function): Do not set and restore
        current_function_decl.
        * omp-low.c (finalize_task_copyfn): Likewise.
        (expand_omp_taskreg): Likewise.
        (create_task_copyfn): Likewise, move push_cfun up quite a bit.
        * passes.c (dump_passes): Do not set and restore current_function_decl.
        (do_per_function): Likewise.
        (do_per_function_toporder): Likewise.
        * trans-mem.c (ipa_tm_scan_irr_function): Likewise.
        (ipa_tm_transform_transaction): Likewise.
        (ipa_tm_transform_clone): Likewise.
        (ipa_tm_execute): Likewise.
        * tree-emutls.c (lower_emutls_function_body): Likewise.
        * tree-inline.c (initialize_cfun): Do not call pop_cfun.
        (tree_function_versioning): Do not call push_cfun, do not set and
        restore current_function_decl.  Remove assert checking consistency of
        cfun and current_function_decl.
        * tree-profile.c (tree_profiling): Do not set and restore
        current_function_decl.
        * tree-sra.c (convert_callers_for_node): Do not set
        current_function_decl.
        (convert_callers): Do not restore current_function_decl.
        (modify_function): Do not set current_function_decl.
        * tree-ssa-structalias.c (ipa_pta_execute): Do not set and restore
        current_function_decl.

2012-09-20  Diego Novillo  <dnovillo@google.com>

        PR target/54631
        * config/vxworks.c (vxworks_emutls_var_init): Update for new
        VEC_quick_push interface.

2012-09-20  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/54634
        * tree-data-ref.c (get_references_in_stmt): For now give
        up for pure functions.

2012-09-20  Chen Wei-Ren  <chenwj@iis.sinica.edu.tw>

        * doc/lto.texi: Correct typo.

2012-09-19  Dehao Chen  <dehao@google.com>

        * config/s390/s390.c (s390_chunkify_start): Replacing INSN_LOCATOR.
        * config/spu/spu.c (emit_nop_for_insn): Likewise.
        (pad_bb): Likewise.
        (spu_emit_branch_hint): Likewise.
        (insert_hbrp_for_ilb_runout): Likewise.
        * config/mep/mep.c (mep_make_bundle): Likewise.
        (mep_bundle_insns): Likewise.
        * config/sh/sh.c (gen_block_redirect): Likewise.
        * config/c6x/c6x.c (gen_one_bundle): Likewise.
        * config/rs6000/rs6000.c (rs6000_final_prescan_insn): Likewise.
        * config/picochip/picochip.c (picochip_reorg): Likewise.
        * config/arm/arm.c (require_pic_register): Likewise.
        * config/mips/mips.c (mips16_gp_pseudo_reg): Likewise.
        * config/bfin/bfin.c (gen_one_bundle): Likewise.

2012-09-19  Mark Kettenis  <kettenis@openbsd.org>

        * config.gcc (hppa*-*-openbsd*): New target.
        * config/pa/pa-openbsd.h: New file.
        * config/pa/pa32-openbsd.h: New file.
        * config/host-openbsd.c: Update copyright year.
        (TRY_EXCEPT_VM_SPACE): Define for OpenBSD/hppa.

2012-09-19  Martin Jambor  <mjambor@suse.cz>

        * ipa-prop.c (prune_expression_for_jf): New function.
        (ipa_set_jf_constant): Use it.
        (ipa_set_jf_arith_pass_through): Likewise.
        (determine_known_aggregate_parts): Likewise.

2012-09-19  Steve Ellcey  <sellcey@mips.com>

        * config.gcc (mips*-mti-elf*): New target.
        * config/mips/mti-elf.h: New file.
        * config/mips/t-mti-elf: New file.

2012-09-19  Dehao Chen  <dehao@google.com>

        * toplev.c (general_init): Init block_locations.
        * tree.c (tree_set_block): New.
        (tree_block): Change to use LOCATION_BLOCK.
        * tree.h (TREE_SET_BLOCK): New.
        * final.c (reemit_insn_block_notes): Change to use LOCATION_BLOCK.
        (final_start_function): Likewise.
        * input.c (expand_location_1): Likewise.
        * input.h (LOCATION_LOCUS): New.
        (LOCATION_BLOCK): New.
        (IS_UNKNOWN_LOCATION): New.
        * fold-const.c (expr_location_or): Change to use new location.
        * reorg.c (emit_delay_sequence): Likewise.
        (try_merge_delay_insns): Likewise.
        * modulo-sched.c (dump_insn_location): Likewise.
        * lto-streamer-out.c (lto_output_location_bitpack): Likewise.
        * lto-cgraph.c (output_node_opt_summary): Likewise.
        * jump.c (rtx_renumbered_equal_p): Likewise.
        * ifcvt.c (noce_try_move): Likewise.
        (noce_try_store_flag): Likewise.
        (noce_try_store_flag_constants): Likewise.
        (noce_try_addcc): Likewise.
        (noce_try_store_flag_mask): Likewise.
        (noce_try_cmove): Likewise.
        (noce_try_cmove_arith): Likewise.
        (noce_try_minmax): Likewise.
        (noce_try_abs): Likewise.
        (noce_try_sign_mask): Likewise.
        (noce_try_bitop): Likewise.
        (noce_process_if_block): Likewise.
        (cond_move_process_if_block): Likewise.
        (find_cond_trap): Likewise.
        * ipa-prop.c (ipa_set_jf_constant): Likewise.
        (ipa_write_jump_function): Likewise.
        * dwarf2out.c (add_src_coords_attributes): Likewise.
        * expr.c (expand_expr_real): Likewise.
        * tree-parloops.c (create_loop_fn): Likewise.
        * recog.c (peep2_attempt): Likewise.
        * function.c (free_after_compilation): Likewise.
        (expand_function_end): Likewise.
        (set_insn_locations): Likewise.
        (thread_prologue_and_epilogue_insns): Likewise.
        * print-rtl.c (print_rtx): Likewise.
        * profile.c (branch_prob): Likewise.
        * trans-mem.c (ipa_tm_scan_irr_block): Likewise.
        * gimplify.c (gimplify_call_expr): Likewise.
        * except.c (duplicate_eh_regions_1): Likewise.
        * emit-rtl.c (try_split): Likewise.
        (make_insn_raw): Likewise.
        (make_debug_insn_raw): Likewise.
        (make_jump_insn_raw): Likewise.
        (make_call_insn_raw): Likewise.
        (emit_pattern_after_setloc): Likewise.
        (emit_pattern_after): Likewise.
        (emit_debug_insn_after): Likewise.
        (emit_pattern_before): Likewise.
        (emit_insn_before_setloc): Likewise.
        (emit_jump_insn_before): Likewise.
        (emit_call_insn_before_setloc): Likewise.
        (emit_call_insn_before): Likeise.
        (emit_debug_insn_before_setloc): Likewise.
        (emit_copy_of_insn_after): Likewise.
        (insn_locators_alloc): Remove.
        (insn_locators_finalize): Remove.
        (insn_locators_free): Remove.
        (set_curr_insn_source_location): Remove.
        (get_curr_insn_source_location): Remove.
        (set_curr_insn_block): Remove.
        (get_curr_insn_block): Remove.
        (locator_scope): Remove.
        (insn_scope): Change to use new location.
        (locator_location): Remove.
        (insn_line): Change to use new location.
        (locator_file): Remove.
        (insn_file): Change to use new location.
        (locator_eq): Remove.
        (insn_locations_init): New.
        (insn_locations_finalize): New.
        (set_curr_insn_location): New.
        (curr_insn_location): New.
        * cfgexpand.c (gimple_assign_rhs_to_tree): Change to use new location.
        (expand_gimple_cond): Likewise.
        (expand_call_stmt): Likewise.
        (expand_gimple_stmt_1): Likewise.
        (expand_gimple_basic_block): Likewise.
        (construct_exit_block): Likewise.
        (gimple_expand_cfg): Likewise.
        * cfgcleanup.c (try_forward_edges): Likewise.
        * tree-ssa-live.c (remove_unused_scope_block_p): Likewise.
        (dump_scope_block): Likewise.
        (remove_unused_locals): Likewise.
        * rtl.c (rtx_equal_p_cb): Likewise.
        (rtx_equal_p): Likewise.
        * rtl.h (XUINT): New.
        (INSN_LOCATOR): Remove.
        (CURR_INSN_LOCATION): Remove.
        (INSN_LOCATION): New.
        (INSN_HAS_LOCATION): New.
        * tree-inline.c (remap_gimple_op_r): Change to use new location.
        (copy_tree_body_r): Likewise.
        (copy_phis_for_bb): Likewise.
        (expand_call_inline): Likewise.
        * tree-streamer-in.c (lto_input_ts_exp_tree_pointers): Likewise.
        * tree-streamer-out.c (write_ts_decl_minimal_tree_pointers): Likewise.
        * gimple-streamer-out.c (output_gimple_stmt): Likewise.
        * combine.c (try_combine): Likewise.
        * tree-outof-ssa.c (set_location_for_edge): Likewise.
        (insert_partition_copy_on_edge): Likewise.
        (insert_value_copy_on_edge): Likewise.
        (insert_rtx_to_part_on_edge): Likewise.
        (insert_part_to_rtx_on_edge): Likewise.
        * basic-block.h (edge_def): Remove field.
        * gimple.h (gimple_statement_base): Remove field.
        (gimple_bb): Change to use new location.
        (gimple_set_block): Likewise.
        (gimple_has_location): Likewise.
        * tree-cfg.c (make_cond_expr_edges): Likewise.
        (make_goto_expr_edges): Likewise.
        (gimple_can_merge_blocks_p): Likewise.
        (move_stmt_op): Likewise.
        (move_block_to_fn): Likewise.
        * config/alpha/alpha.c (alpha_output_mi_thunk_osf): Likewise.
        * config/sparc/sparc.c (sparc_output_mi_thunk): Likewise.
        * config/i386/i386.c (x86_output_mi_thunk): Likewise.
        * config/tilegx/tilegx.c (tilegx_output_mi_thunk): Likewise.
        * config/sh/sh.c (sh_output_mi_thunk): Likewise.
        * config/ia64/ia64.c (ia64_output_mi_thunk): Likewise.
        * config/rs6000/rs6000.c (rs6000_output_mi_thunk): Likewise.
        * config/score/score.c (score_output_mi_thunk): Likewise.
        * config/tilepro/tilepro.c (tilepro_asm_output_mi_thunk): Likewise.
        * config/mips/mips.c (mips_output_mi_thunk): Likewise.
        * cfgrtl.c (unique_locus_on_edge_between_p): Likewise.
        (unique_locus_on_edge_between_p): Likewise.
        (emit_nop_for_unique_locus_between): Likewise.
        (force_nonfallthru_and_redirect): Likewise.
        (fixup_reorder_chain): Likewise.
        (cfg_layout_merge_blocks): Likewise.
        * stmt.c (emit_case_nodes): Likewise.

2012-09-19  Bernd Schmidt  <bernds@codesourcery.com>

        * dbgcnt.def (sched_breakdep): New counter.
        * haifa-sched.c (update_insn_after_change): New static function,
        broken out of haifa_change_pattern.
        (haifa_change_pattern): Call it.
        (dep_t heap vecs): Declare.
        (INSN_COST): Define earlier.
        (next_cycle_replace_deps, next_cycle_apply): New static variables.
        (apply_replacement): New static function.
        (recompute_todo_spec): New argument FOR_BACKTRACK.  All callers
        changed.  Handle DEP_REPLACE deps.
        (contributes_to_priority_p): False for replaceable deps.
        (must_restore_pattern_p, restore_pattern): New static functions.
        (schedule_insn): Use them.  Apply replacements for broken deps.
        (struct haifa_saved_data): Add new fields to keep track of
        replacements.
        (save_backtrack_point): Initialize them.
        (undo_replacements_for_backtrack): New static function.
        (restore_last_backtrack_point, free_topmost_backtrack_point):
        Use it and keep track of replacements.
        (perform_replacements_new_cycle, undo_all_replacements): New static
        functions.
        (schedule_block): Call these two as necessary.  Call
        find_modifiable_mems.
        (try_ready): Tweak the assert.  Check for DEP_POSTPONED.
        * sched-deps.c: Include "emit-rtl.h".
        (init_dep_1): Initialize DEP_NONREG, DEP_MULTIPLE and DEP_REPLACE.
        (dep_spec_p): True for DEP_REPLACE deps.
        (mark_as_hard): New static variable.
        (update_dep): Update DEP_NONREG and DEP_MULTIPLE.
        (add_dependence_list): New argument hard.  All callers changed.  Set
        and clear mark_as_hard around function body.
        (add_dependence_list_and_free): Likewise.
        (haifa_note_mem_dep): Set DEP_NONREG.
        (haifa_note_dep): Likewise if mark_as_hard is true.
        (sched_analyze_insn): Switch loop with if statement testing for
        sel_sched_p.
        (struct mem_inc_info): New.
        (attempt_change, parse_add_or_inc, find_inc, find_mem): New static
        functions.
        (find_modifiable_mems): New function.
        * sched-int.h (struct dep_replacement): New.
        (struct _dep): Add replace, nonreg and multiple fields.  Make type and
        cost bitfields.
        (UNKNOWN_DEP_COST): Change to match the bitfield.
        (DEP_NONREG, DEP_MULTIPLE, DEP_REPLACE): New macros.
        (DEP_POSTPONED): New macro.
        (DEP_CANCELLED): Renumber.
        (find_modifiable_mems): Declare.
        (enum SCHED_FLAGS): Add DONT_BREAK_DEPENDENCIES.
        * sched-rgn.c (init_ready_list): Set TODO_SPEC here.
        (new_ready): Don't set HARD_DEP, use DEP_POSTPONED.
        (debug_dependencies): Dump DEP_NONREG and DEP_MULTIPLE.
        * Makefile.in (sched-deps.o): Update dependencies.
        * config/c6x/c6x.c (in_hwloop): New static variable.
        (c6x_set_sched_flags): If it is true, add DONT_BREAK_DEPENDENCIES.
        (hwloop_optimize): Set and clear it around preliminary scheduling pass.

2012-09-19  Tulio Magno Quites Machado Filho  <tuliom@linux.vnet.ibm.com>

        * config/rs6000/rs6000-builtin.def: Add __builtin_ppc_get_timebase
        and __builtin_ppc_mftb.
        * config/rs6000/rs6000.c (rs6000_expand_zeroop_builtin): New function
        to expand an expression that calls a built-in without arguments.
        (rs6000_expand_builtin): Add __builtin_ppc_get_timebase and
        __builtin_ppc_mftb.
        (rs6000_init_builtins): Likewise.
        * config/rs6000/rs6000.md (rs6000_get_timebase): New pattern.
        (rs6000_get_timebase_ppc32): New pattern.
        (rs6000_mftb_<mode>): New pattern.

        * doc/extend.texi (PowerPC Built-in Functions): New section.
        (PowerPC AltiVec/VSX Built-in Functions): Move some built-ins
        unrelated to Altivec/VSX to the new section.

2012-09-19  David Edelsohn  <dje.gcc@gmail.com>

        * rs6000.md (mac*): Remove extra spaces.
        (mulhw*): Same.

2012-09-19  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54089
        * config/sh/predicates.md (arith_reg_or_t_reg_operand): New predicate.
        * config/sh/sh.md (*rotcr): Use arith_reg_or_t_reg_operand predicate.
        Handle the case where one of the operands is T_REG.
        Add new pattern to handle MSB extraction.

2012-09-19  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54236
        * config/sh/sh.md (*addc): Add pattern to handle one bit left shifts.

2012-09-19  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.md (prologue, epilogue): Use braced strings.

2012-09-19  Eric Botcazou  <ebotcazou@adacore.com>

        PR rtl-optimization/54290
        * reload1.c (choose_reload_regs): Also take into account secondary MEMs
        to remove address replacements for inherited reloads.
        (replaced_subreg): Move around.

2012-09-19  David Edelsohn  <dje.gcc@gmail.com>

        * config/rs6000/aix61.h (TARGET_DEFAULT): Add MASK_PPC_GPOPT,
        MASK_PPC_GFXOPT, and MASK_MFCRF.

2012-09-19  Richard Guenther  <rguenther@suse.de>

        * passes.c (init_optimization_passes): For -Og move
        pass_object_sizes inbetween CCP and copyprop.

2012-09-19  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-forwprop.c (get_prop_source_stmt): Simplify.

2012-09-19  Jan Hubicka  <jh@suse.cz>

        * symtab.c (insert_to_assembler_name_hash): Do not insert
        register vars.
        (unlink_from_assembler_name_hash): NULL out pointers of unlinked var.
        (symtab_prevail_in_asm_name_hash): New.
        (symtab_initialize_asm_name_hash): Break out from ...
        (symtab_node_for_asm): ... here.
        (dump_symtab_base): Dump LTO file data.
        (verify_symtab_base): Register vars are not in symtab.
        * cgraph.h (symtab_initialize_asm_name_hash,
        symtab_prevail_in_asm_name_hash): New functions.
        (symtab_real_symbol_p): New inline.
        * lto-symtab.c: Do not include gt-lto-symtab.h.
        (lto_symtab_entry_def): Remove.
        (lto_symtab_entry_t): Remove.
        (lto_symtab_identifiers): Remove.
        (lto_symtab_free): Remove.
        (lto_symtab_entry_hash): Remove.
        (lto_symtab_entry_eq): Remove.
        (lto_symtab_entry_marked_p): Remove.
        (lto_symtab_maybe_init_hash_table): Remove.
        (resolution_guessed_p, set_resolution_guessed): New functions.
        (lto_symtab_register_decl): Only set resolution info.
        (lto_symtab_get, lto_symtab_get_resolution): Remove.
        (lto_symtab_merge): Reorg to work across symtab; do nothing if decls
        are same.
        (lto_symtab_resolve_replaceable_p): Reorg to work on symtab.
        (lto_symtab_resolve_can_prevail_p): Likewise; only real symbols can
        prevail.
        (lto_symtab_resolve_symbols): Reorg to work on symtab.
        (lto_symtab_merge_decls_2): Likewise.
        (lto_symtab_merge_decls_1): Likewise; add debug dumps.
        (lto_symtab_merge_decls): Likewise; do not merge at ltrans stage.
        (lto_symtab_merge_cgraph_nodes_1): Reorg to work on symtab.
        (lto_symtab_merge_cgraph_nodes): Likewise; do not merge at ltrans
        stage.
        (lto_symtab_prevailing_decl): Rewrite to lookup into symtab.
        * lto-streaer.h (lto_symtab_free): Remove.
        * lto-cgraph.c (add_references): Cleanup.
        * varpool.c (varpool_assemble_decl): Skip hard regs.

2012-09-19  Richard Guenther  <rguenther@suse.de>

        PR other/53316
        * common/common-target.h (OPT_LEVELS_1_PLUS_NOT_DEBUG): Add.

2012-09-19  Richard Guenther  <rguenther@suse.de>

        PR other/53316
        * common.opt (optimize_debug): New variable.
        (Og): New optimization level.
        * doc/invoke.texi (Og): Document.
        * opts.c (maybe_default_option): Add debug parameter.
        (maybe_default_options): Likewise.
        (default_options_optimization): Handle -Og.
        (common_handle_option): Likewise.
        * passes.c (gate_all_optimizations): Do not run with -Og.
        (gate_all_optimizations_g): New gate, run with -Og.
        (pass_all_optimizations_g): New container pass, run with -Og.
        (init_optimization_passes): Schedule pass_all_optimizations_g
        alongside pass_all_optimizations.

2012-09-19  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/54132
        * tree-loop-distribution.c (classify_partition): Properly
        check dependences for memmove.
        * tree-data-ref.h (compute_affine_dependence): Declare.
        * tree-data-ref.c (compute_affine_dependence): Export.

2012-09-19  Zhenqiang Chen <zhenqiang.chen@arm.com>

        PR middle-end/54364
        * bb-reorder.c (connect_better_edge_p): New added.
        (find_traces_1_round): When optimizing for size, ignore edge frequency
        and probability, and handle all in one round.
        (bb_to_key): Use bb->index as key when optimizing for size.
        (better_edge_p): The bb with smaller index is better when optimizing
        for size.
        (connect_traces): When optimizing for size, connect block n with
        block n + 1; connect trace m with trace m + 1 if falling through.
        (gate_handle_reorder_blocks): Enable bbro when optimizing for -Os.

2012-09-19  Bin Cheng  <bin.cheng@arm.com>

        * fold-const.c (fold_truth_andor): Remove duplicated check on
        BRANCH_COST.

2012-09-18  Eric Botcazou  <ebotcazou@adacore.com>

        PR middle-end/54617
        * expr.c (store_field): Handle a PARALLEL in more cases.

2012-09-18  Segher Boessenkool  <segher@kernel.crashing.org>

        * config/rs6000/rs6000.md (sminsi3, smaxsi3, uminsi3, umaxsi3): Delete.
        (abssi2, abs<mode>2_isel, nabs<mode>2_isel, abssi2_nopower,
        nabs_nopower): Delete.
        (absdi2, absdi2_internal, nabsdi2): Delete.
        (smindi3, smaxdi3, umindi3, umaxdi3): Delete.

2012-09-18  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.md: Tidy up empty "".  Fix C code indentation.
        * config/avr/avr-fixed.md: Ditto.

2012-09-18  Maciej W. Rozycki  <macro@codesourcery.com>

        * config/rs6000/rs6000.c (print_operand) <'c'>: Remove.
        * config/rs6000/spe.md: Remove a leftover comment.

2012-09-18  Jakub Jelinek  <jakub@redhat.com>

        PR target/54592
        * config/i386/i386.c (ix86_rtx_costs): Limit > UNITS_PER_WORD
        AND/IOR/XOR cost calculation to MODE_INT class modes.

2012-09-18 Thomas Quinot  <quinot@adacore.com>

        * doc/invoke.texi: Document -fada-spec-parent.

2012-09-18  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/54610
        * tree-ssa-forwprop.c: Include optabs.h.  Don't include
        tree-vectorizer.h.
        (simplify_vector_constructor): Don't use vect_gen_perm_mask,
        instead create the mask constant here.
        * Makefile.in (tree-ssa-forwprop.o): Depend on $(OPTABS_H).
        Don't depend on $(TREE_VECTORIZER_H).

2012-09-18  Florian Weimer  <fweimer@redhat.com>

        * Makefile.in (BASIC_BLOCK_H): Add cfg-flags.def.

2012-09-18  Richard Guenther  <rguenther@suse.de>

        * statistics.h (CXX_MEM_STAT_INFO): New define.
        * gimple.h (gimple_build_assign_with_ops_stat,
        gimple_build_assign_with_ops, gimple_build_assign_with_ops3):
        Turn into an overload of the function gimple_build_assign_with_ops.
        * gimple.c (gimple_build_assign_with_ops_stat): Rename to ...
        (gimple_build_assign_with_ops): ... this.
        * tree-ssa-loop-im.c (move_computations_stmt): Adjust.
        * tree-ssa-math-opts.c (convert_mult_to_fma): Likewise.
        * tree-vect-data-refs.c (vect_permute_store_chain): Likewise.
        (vect_permute_load_chain): Likewise.
        * tree-vect-generic.c (expand_vector_divmod): Likewise.
        * tree-vect-patterns.c (vect_recog_dot_prod_pattern): Likewise.
        (vect_recog_divmod_pattern): Likewise.
        (vect_recog_mixed_size_cond_pattern): Likewise.
        (adjust_bool_pattern): Likewise.
        * tree-vect-slp.c (vect_create_mask_and_perm): Likewise.
        * tree-vect-stmts.c (vectorizable_operation): Likewise.
        (permute_vec_elements): Likewise.
        (vectorizable_load): Likewise.

2012-09-17  Paul Koning  <ni1d@arrl.net>

        * doc/invoke.text (-feliminate-unused-debug-types): Update to
        reflect that this is enabled by default.

2012-09-17  Ben Cheng  <bccheng@google.com

        * config/arm/linux-elf.h (LINUX_TARGET_LINK_SPEC): Suppress the
        dynamic linker commands for statically linked programs.

2012-09-17  Ulrich Weigand  <ulrich.weigand@linaro.org>

        * config/arm/arm.c (arm_rtx_costs_1): Handle vec_extract and vec_set
        patterns.
        * config/arm/arm.md ("vec_set<mode>_internal"): Support memory source
        operands, implemented via vld1 instruction.
        ("vec_extract<mode>"): Support memory destination operands, implemented
        via vst1 instruction.
        ("neon_vst1_lane<mode>"): Use UNSPEC_VST1_LANE instead of vec_select.
        * config/arm/predicates.md ("neon_lane_number"): Remove.

2012-09-17  Ramana Radhakrishnan  <ramana.radhakrishnan@linaro.org>
            Ulrich Weigand  <ulrich.weigand@linaro.org>

        * config/arm/arm.c (output_move_neon): Update comment.
        Use vld1.64/vst1.64 instead of vldm/vstm where possible.
        (neon_vector_mem_operand): Support double-word modes.
        * config/arm/neon.md (*neon_mov VD): Call output_move_neon
        instead of output_move_vfp.  Change constraint from Uv to Un.

2012-09-17  Richard Guenther  <rguenther@suse.de>

        PR lto/54598
        * tree-streamer-in.c (unpack_ts_real_cst_value_fields): Use ggc'ed
        FIXED_VALUE_TYPE instead of struct fixed_value.

2012-09-17  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.c (CONST_FIXED_P): Remove define.
        * config/avr/avr.md (add<mode>3): Use CONST_FIXED_P.

2012-09-17  Georg-Johann Lay  <avr@gjlay.de>

        PR target/54607
        * config.gcc (tm_file,avr): Add avr/avr-arch.h.
        * config/avr/t-avr (gen-avr-mmcu-texi): Use CC_FOR_BUILD to
        compile.  Don't depend on TM_H.  Use CFLAGS_FOR_BUILD.
        * config/avr/avr.h (avr_arch, base_arch_s, mcu_type_s): Source out
        to...
        * config/avr/avr-arch.h: ...this new file.
        * config/avr/gen-avr-mmcu-texi.c: Include avr-arch.h, stdio.h,
        stdlib.h.
        * comparator: Make letters smaller than digits.
        * config/avr/avr-devices.c: Don't include headers if used in
        gen-avr-mmcu-texi.c.
        * doc/avr-mmcu.texi: Regenerate.

2012-09-17  Georg-Johann Lay  <avr@gjlay.de>

        * rtl.h (CONST_FIXED_P): New predicate macro.

2012-09-17  Eric Botcazou  <ebotcazou@adacore.com>

        * tree-cfgcleanup. (cleanup_control_expr_graph) <GIMPLE_COND>: Remove
        code doing propagation from degenerate PHI nodes.
        * tree-ssa-loop-ivcanon.c (propagate_into_all_uses): New function.
        (propagate_constants_for_unrolling): Likewise.
        (tree_unroll_loops_completely): If the current loop has been unrolled
        and its father isn't the entire function, propagate constants within
        the new basic blocks by means of propagate_constants_for_unrolling.

2012-09-17  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/54563
        * tree-ssa-math-opts.c (execute_cse_sincos): Call
        gimple_purge_dead_eh_edges if last call has been changed.

2012-09-17  Georg-Johann Lay  <avr@gjlay.de>

        PR target/54222
        * config/avr/avr.c (avr_out_plus_symbol): Fix typo if PLUS and PSImode.
        (avr_out_plus_1): Remove log comments from assembler output.

2012-09-17  Ruben Buchatskiy  <ruben@ispras.ru>

        * config/arm/vfp.md (*thumb2_movdf_vfp): Require one of the operands
        to be a register.

2012-09-16  Richard Sandiford  <rdsandiford@googlemail.com>

        * calls.c (expand_call): Use emit_group_move for PARALLEL->PARALLEL
        moves.

2012-09-15  Tom de Vries  <tom@codesourcery.com>

        * tree-vrp.c (extract_range_from_binary_expr_1): Fix bug in handling of
        LSHIFT_EXPR with shift range.  Handle more LSHIFT_EXPR cases with shift
        range.

2012-09-15  Georg-Johann Lay  <avr@gjlay.de>

        PR target/54222
        * config/avr/avr-fixed.md (ALL2S, ALL4S, ALL24S, ALL124S,
        ALL124U): New mode iterators.
        (<code_stdname><mode>3): New insns for SS_PLUS, SS_MINUS.
        (<code_stdname><mode>3): New insns for US_PLUS, US_MINUS.
        (usneg<mode>2): New insns.
        (<code_stdname><mode>2): New expanders for SS_NEG, SS_ABS.
        (*<code_stdname><mode>2): New insns for SS_NEG, SS_ABS.
        * config/avr/avr-dimode.md (ALL8U, ALL8S): New mode iterators.
        (avr_out_plus64, avr_out_minus64): Use avr_out_plus instead.
        (<code_stdname><mode>3): New expanders for SS_PLUS, SS_MINUS.
        (<code_stdname><mode>3): New expanders for US_PLUS, US_MINUS.
        (<code_stdname><mode>3_insn): New insns.
        (<code_stdname><mode>3_const_insn): New insns.
        * config/avr/avr.md (cc): Add: plus. Remove: out_plus,
        out_plus_noclobber, minus.
        (length): Add: plus.  Remove: out_plus, out_plus_noclobber,
        plus64, minus, minus64.
        (abelian): New code_attr.
        (code_stdname): Handle: ss_plus, ss_minus, ss_neg, ss_abs,
        us_plus, us_minus, us_neg.
        (*add<mode>3, add<mode>3_clobber, add<mode>3, addpsi3, sub<mode>3):
        Use avr_out_plus to output.
        * config/avr/avr-protos.h (avr_out_plus): Change prototype.
        (avr_out_plus_noclobber, avr_out_minus): Remove.
        (avr_out_plus64, avr_out_minus64): Remove.
        * config/avr/avr.c (avr_out_plus_1): Add new default arguments
        code_sat, sign.  Saturate after operation if code_sat != UNKNOWN.
        (avr_out_plus_symbol): New static function.
        (avr_out_plus): Rewrite.
        (adjust_insn_length): Handle: ADJUST_LEN_PLUS.  Remove handling
        of: ADJUST_LEN_OUT_PLUS, ADJUST_LEN_PLUS64, ADJUST_LEN_MINUS,
        ADJUST_LEN_MINUS64, ADJUST_LEN_OUT_PLUS_NOCLOBBER.
        (notice_update_cc): Handle: CC_PLUS.  Remove handling of: CC_MINUS,
        CC_OUT_PLUS, CC_OUT_PLUS_NOCLOBBER
        (avr_out_plus_noclobber, avr_out_minus): Remove.
        (avr_out_plus64, avr_out_minus64): Remove.
        (avr_print_operand): Print raw REGNO if 'r' is used with REG.

2012-09-15  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.c (sh_rtx_costs): Add handling of MEM, SIGN_EXTEND,
        ZERO_EXTEND and PARALLEL cases.
        (sh_address_cost): Correct rtx parsing and tweak cost estimations.

2012-09-14  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/tm.texi.in (Stack Arguments): Update obsolete references
        to current_function_outgoing_args_size.
        (Function Entry): Likewise for current_function_pops_args,
        current_function_pretend_args_size,
        current_function_outgoing_args_size, and
        current_function_epilogue_delay_list.
        (Misc): Fix garbled sentence referencing nonexistent
        current_function_leaf_function.
        * doc/tm.texi: Regenerated.

2012-09-14  Dehao Chen  <dehao@google.com>

         * tree-eh.c (goto_queue_node): New field.
        (record_in_goto_queue): New parameter.
        (record_in_goto_queue_label): New parameter.
        (lower_try_finally_dup_block): New parameter.
        (maybe_record_in_goto_queue): Update source location.
        (lower_try_finally_copy): Likewise.
        (honor_protect_cleanup_actions): Likewise.
        * gimplify.c (gimplify_expr): Reset the location to unknown.

2012-09-14  David Edelsohn  <dje.gcc@gmail.com>

        * configure: Regenerated.

2012-09-14  Walter Lee  <walt@tilera.com>

        * doc/invoke.texi (Option Summary): fix typesetting for -mcpu
        option for TILEPro and TILE-Gx.
        (TILE-Gx Options): Fix grammar and spellings in documentation for
        -mcmodel.

2012-09-14  Marc Glisse  <marc.glisse@inria.fr>

        PR c++/54427
        * fold-const.c (fold_unary_loc): Disable for VECTOR_TYPE.
        (fold_binary_loc): Likewise.
        * gimple-fold.c (and_comparisons_1): Handle VECTOR_TYPE.
        (or_comparisons_1): Likewise.

2012-09-14  Richard Earnshaw  <rearnsha@arm.com>

        PR target/54516
        PR rtl-optimization/54540
        * reload.c (find_dummy_reload): Don't use OUT as a reload reg
        for IN if it overlaps a fixed register.

2012-09-14  Eric Botcazou  <ebotcazou@adacore.com>

        PR rtl-optimization/44194
        * calls.c (expand_call): In the PARALLEL case, copy the return value
        into pseudos instead of spilling it onto the stack.
        * emit-rtl.c (adjust_address_1): Rename ADJUST into ADJUST_ADDRESS and
        add new ADJUST_OBJECT parameter.
        If ADJUST_OBJECT is set, drop the underlying object if it cannot be
        proved that the adjusted memory access is still within its bounds.
        (adjust_automodify_address_1): Adjust call to adjust_address_1.
        (widen_memory_access): Likewise.
        * expmed.c (store_bit_field_1): Call adjust_bitfield_address instead
        of adjust_address.  Do not drop the underlying object of a MEM.
        (store_fixed_bit_field): Likewise.
        (extract_bit_field_1): Likewise.  Fix oversight in recursion.
        (extract_fixed_bit_field): Likewise.
        * expr.h (adjust_address_1): Adjust prototype.
        (adjust_address): Adjust call to adjust_address_1.
        (adjust_address_nv): Likewise.
        (adjust_bitfield_address): New macro.
        (adjust_bitfield_address_nv): Likewise.
        * expr.c (expand_assignment): Handle a PARALLEL in more cases.
        (store_expr): Likewise.
        (store_field): Likewise.

        * dse.c: Fix typos in the head comment.

2012-09-14  Christian Bruel  <christian.bruel@st.com>

        PR target/54546
        * config/sh/sh-protos.h (sh_need_epilogue): Delete.
        (sh_can_use_simple_return_p): Declare.
        * config/sh/sh.c (sh_can_use_simple_return_p): Define.
        (sh_need_epilogue, sh_need_epilogue_known): Delete.
        (sh_output_function_epilogue): Remove sh_need_epilogue_known.
        * config/sh/sh.md (simple_return, return): Define.
        (epilogue): Use inline return rtl.
        (sh_expand_epilogue): Cleanup parameters boolean type.
        * config/sh/iterators.md (any_return): New iterator.

2012-09-14  Christian Bruel  <christian.bruel@st.com>

        * config/sh/predicates.md (t_reg_operand): Check REG_P for SUBREG.
        * config/sh/sh.c (sequence_insn_p): Check INSNP_P for SEQUENCE.

2012-09-14  Jakub Jelinek  <jakub@redhat.com>

        PR target/54564
        * config/i386/sse.md (fmai_vmfmadd_<mode>): Use (match_dup 1)
        instead of (match_dup 0) as second argument to vec_merge.
        (*fmai_fmadd_<mode>, *fmai_fmsub_<mode>): Likewise.
        Remove third alternative.
        (*fmai_fnmadd_<mode>, *fmai_fnmsub_<mode>): Likewise.  Negate
        operand 2 instead of operand 1, but put it as first argument of fma.
        * config/i386/fmaintrin.h (_mm_fnmadd_sd, _mm_fnmadd_ss,
        _mm_fnmsub_sd, _mm_fnmsub_ss): Negate the second argument instead
        of the first.

2012-09-14  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/54565
        * passes.c (init_optimization_passes): Adjust comments.
        (execute_function_todo): Do not execute execute_update_addresses_taken
        before processing TODO_rebuild_alias.
        * tree-ssa-ccp.c (do_ssa_ccp): Schedule TODO_update_address_taken.

2012-09-14  Richard Guenther  <rguenther@suse.de>

        * tree-vrp.c (register_new_assert_for): Simplify for backward walk.
        (find_assert_locations_1): Walk the basic-block backwards, properly
        add/prune from live.  Use live for asserts derived from stmts.

2012-09-14  Marc Glisse  <marc.glisse@inria.fr>

        * tree-ssa-forwprop.c (simplify_bitfield_ref): Call
        get_prop_source_stmt.
        (simplify_permutation): Likewise.
        (simplify_vector_constructor): Likewise.

2012-09-14  Richard Guenther  <rguenther@suse.de>

        * builtin-types.def (BT_FN_CONST_STRING): Add.
        * builtins.def (BUILT_IN_FILE, BUILT_IN_FUNCTION,
        BUILT_IN_LINE): New builtins.
        * gimplify.c (gimplify_call_expr): Expand them.
        * doc/extend.texi (__builtin_LINE, __builtin_FUNCTION,
        __builtin_FILE): Document.

2012-09-13  Anthony Green  <green@moxielogic.com>

        * config/moxie/moxie.h (LINK_SPEC): Add bi-endian support.
        (MULTILIB_DEFAULTS): Define.
        (ASM_SPEC): Define.
        (BYTES_BIG_ENDIAN, WORDS_BIG_ENDIAN): Add bi-endian support.
        (TARGET_CPU_CPP_BUILTINS): Add __MOXIE_LITTLE_ENDIAN__ and
        __MOXIE_BIG_ENDIAN__.
        * config/moxie/t-moxie (MULTILIB_DIRNAMES, MULTILIB_OPTIONS): Define.
        * config/moxie/moxie.opt: New file.
        * doc/invoke.texi (Moxie Options): Add section documenting -mel
        and -meb.

2012-09-13  Paolo Carlini  <paolo.carlini@oracle.com>
            Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR c++/53210
        * doc/invoke.texi ([Winit-self]): Document as enabled by -Wall in C++.

2012-09-13  Eric Botcazou  <ebotcazou@adacore.com>

        * config/sparc/predicates.md (input_operand): Do not consider TImode
        constants as 1-instruction integer constants.
        Use register_or_zero_operand instead of register_operand and tidy up.
        * config/sparc/sparc.md (movti): New expander.
        (movti_insn_sp64): New instruction.
        (movti_insn_sp64_hq): Likewise.
        (TImode splitters): New splitters.
        * config/sparc/sparc.c (sparc_expand_move) <TImode>: New case.
        (sparc_legitimate_address_p): Return 0 for REG+REG in TImode.

        * config/sparc/sparc-protos.h (arith_double_4096_operand): Delete.
        (arith_4096_operand): Likewise.
        (zero_operand): Likewise.
        (fp_zero_operand): Likewise.
        (reg_or_0_operand): Likewise.

2012-09-13  Jakub Jelinek  <jakub@redhat.com>

        * configure.ac (CXXFLAGS): Remove -O2 when not bootstrapping.
        * configure: Regenerated.

2012-08-13  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (prefetch): Do not assert mode of operand 0.
        (*prefetch_sse_<mode>): Do not set mode of address_operand predicate.
        Rename to ...
        (*prefetch_sse): ... this.
        (*prefetch_3dnow_<mode>): Do not set mode of address_operand predicate.
        Rename to ...
        (*prefetch_3dnow): ... this.

2012-09-13  Steven Bosscher  <steven@gcc.gnu.org>

        * ipa-pure-const.c (state_from_flags, local_pure_const): Use
        current_function_name instead of lang_hooks.decl_printable_name.

        * function.h (fndecl_name): New prototype.
        * function.c (fndecl_name): New function.
        * vecir.h (cgraph_node_p): New standard IR VEC type.
        * trans-mem.c (cgraph_node_p): No need anymore to define it here.
        * ipa-utils.h (ipa_get_nodes_in_cycle): New prototype.
        * ipa-utils.c (ipa_get_nodes_in_cycle): New function.
        * ipa-reference.c: Don't include langhooks.h, and certainly not twice.
        Fix many formatting issues (long lines, short lines, spacing, etc.).
        (get_static_name): Use fndecl_name.
        (dump_static_vars_set_to_file): New function split out from propagate.
        (union_static_var_sets): New function, union two sets and collapse
        to all_module_statics as quickly as possible.
        (intersect_static_var_sets): New function, similar to above.
        (copy_static_var_set): Renamed from copy_global_bitmap and rewritten
        to allocate a copy on the same bitmap_obstack as the source set.
        (propagate_bits): Simplify, and clarify by using union_static_var_sets.
        (generate_summary): Remove bm_temp.  Print UID of promotable globals.
        (read_write_all_from_decl): Use pass-by-reference, bless C++.
        (get_read_write_all_from_node): New function, split out from propagate.
        (propagate): Simplify and clarify with helper functions.  Use
        ipa_get_nodes_in_cycle to walk all nodes in a reduced node.
        (ipa_reference_read_optimization_summary): Use fndecl_name instead of
        lang_hooks.decl_printable_name.

        * rtl.h (print_rtl_single_with_indent): New prototype.
        * print-rtl.c (print_rtl_single_with_indent): New function.
        * cfghooks.h (empty_block_p, split_block_before_cond_jump): New hooks.
        * cfghooks.c (empty_block_p, split_block_before_cond_jump): Implement.
        * cfgrtl.c (rtl_block_empty_p, rtl_split_block_before_cond_jump):
        Implement RTL specific hooks.
        (rtl_cfg_hooks, cfg_layout_rtl_cfg_hooks): Register the new hooks.
        * tree-cfg.c (gimple_empty_block_p,
        gimple_split_block_before_cond_jump): Implement GIMPLE specific hooks.
        (gimple_cfg_hooks): Register the new hooks.
        * tree-ssa-phiopt.c (empty_block_p): Remove in favor of new hook.

2012-09-13  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-sccvn.h (enum vn_kind): New.
        (vn_get_stmt_kind): Likewise.
        * tree-ssa-sccvn.c (vn_get_stmt_kind): New function, adjust
        ADDR_EXPR handling.
        (visit_use): Use it.
        * tree-ssa-pre.c (compute_avail): Likewise, simplify further.

2012-09-13  Venkataramanan Kumar  <venkataramanan.kumar@amd.com>

        * config/i386/i386.c (processor_alias_table): Enable PTA_PRFCHW
        for targets bdver1, bdver2, btver1 and btver2.

2012-09-13  Christophe Lyon  <christophe.lyon@linaro.org>
            Richard Earnshaw  <rearnsha@arm.com>

        * config/arm/arm.md (arm_rev): Factorize thumb1, thumb2 and arm
        variants for rev instruction..
        (thumb1_rev): Delete pattern.
        (arm_revsh): New pattern to support builtin_bswap16.
        (arm_rev16, bswaphi2): Likewise.

2012-09-12  Teresa Johnson  <tejohnson@google.com>

        PR gcov-profile/54487
        * configure.ac (HOST_HAS_F_SETLKW): Set based on compile
        test using F_SETLKW with fcntl.
        * configure, config.in: Regenerate.

2012-09-12  Jan Hubicka  <jh@suse.cz>

        PR fortran/48636
        * ipa-inline-analysis.c (dump_inline_hints): Dump loop stride.
        (set_hint_predicate): New function.
        (reset_inline_summary): Reset loop stride.
        (remap_predicate_after_duplication): New function.
        (remap_hint_predicate_after_duplication): New function.
        (inline_node_duplication_hook): Update.
        (dump_inline_summary): Dump stride summaries.
        (estimate_function_body_sizes): Compute strides.
        (remap_hint_predicate): New function.
        (inline_merge_summary): Use it.
        (inline_read_section): Read stride.
        (inline_write_summary): Write stride.
        * ipa-inline.c (want_inline_small_function_p): Handle strides.
        (edge_badness): Likewise.
        * ipa-inline.h (inline_hints_vals): Add stride hint.
        (inline_summary): Update stride.

2012-09-12  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (x86_prefetch_sse): Change to unsigned char.
        * config/i386/i386.h (x86_prefetch_sse): Ditto.

2012-09-12  H.J. Lu  <hongjiu.lu@intel.com>

        PR target/54445
        * config/i386/predicates.md (x86_64_immediate_operand): Allow
        negative offset for UNSPEC_DTPOFF/UNSPEC_NTPOFF.

2012-09-12  Jan Hubicka  <jh@suse.cz>

        * common.opt (flto-partition): Add "max".
        * invoke.texi (flto-partition): Document "max"

2012-09-12  Ganesh Gopalasubramanian  <Ganesh.Gopalasubramanian@amd.com>

        * config/i386/i386.md : Comments on fma4 instruction selection
        reflect requirement on register pressure based cost model.

        * config/i386/driver-i386.c (host_detect_local_cpu): fma4
        flag is set-reset as informed by the cpuid flag.

        * config/i386/i386.c (processor_alias_table): fma4
        flag is enabled for bdver2.

2012-09-12  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/54489
        * tree-ssa-pre.c: Include domwalk.h.
        (in_fre): Remove.
        (sccvn_valnum_from_value_id): New function.
        (debug_bitmap_sets_for): Simplify.
        (get_representative_for): Properly initialize the SCCVN valnum.
        (create_expression_by_pieces): Likewise.
        (insert_into_preds_of_block): Likewise.
        (can_PRE_operation): Remove.
        (make_values_for_phi): Simplify.
        (compute_avail): Likewise.
        (do_SCCVN_insertion): Remove.
        (eliminate_avail, eliminate_push_avail, eliminate_insert):
        New functions.
        (eliminate): Split and perform a domwalk.
        (eliminate_bb): Former eliminate part that is now dom-enter.
        (eliminate_leave_block): New function.
        (fini_eliminate): Likewise.
        (init_pre): Simplify.
        (fini_pre): Likewise.
        (execute_pre): Fold into do_pre and do_fre.
        (do_pre): Consume execute_pre.
        (do_fre): Likewise.
        * Makefile.in (tree-ssa-pre.o): Add domwalk.h dependency.

2012-09-12  Diego Novillo  <dnovillo@google.com>

        * vec.h: Remove compatibility notes for previous distinction
        between vectors of objects and vectors of pointers.

2012-09-12  Christian Bruel  <christian.bruel@st.com>

        * config/sh/newlib.h (NO_IMPLICIT_EXTERN_C): Define.

2012-09-12  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * rtl.h (FFS, FLOAT, ABS, PC): Don't undef.
        * system.h (FFS, FLOAT, ABS, PC): Undef.

2012-09-12  Richard Guenther  <rguenther@suse.de>

        PR middle-end/54553
        * common.opt (finline): Mark with Optimization.

2012-09-12  Jakub Jelinek  <jakub@redhat.com>

        * config.gcc: Obsolete picochip-*.

2012-09-12  Nathan Froyd  <froydnj@gcc.gnu.org>
            Hans-Peter Nilsson  <hp@bitrange.com>

        * config/mmix/mmix.h (MMIX_REG_OK_STRICT): Delete.
        (REG_CLASS_FROM_LETTER, CONST_OK_FOR_LETTER_P): Delete.
        (CONST_DOUBLE_OK_FOR_LETTER_P, EXTRA_CONSTRAINT): Delete.
        * config/mmix/mmix-protos.h (mmix_intval): Declare.
        (mmix_const_ok_for_letter_p, mmix_extra_constraint): Delete.
        (mmix_const_double_ok_for_letter_p): Delete.
        * config/mmix/constraints.md: New file.
        * config/mmix/mmix.md: Include it.
        (iordi3): Fix typo; use "I" instead of undefined "H" constraint.
        ("*call_real"): Update comment about not using the "p" constraint.
        * config/mmix/predicates.md (mmix_reg_or_8bit_operand): Use
        satisfies_constraint_I.
        (mmix_address_operand): New predicate.
        (mmix_symbolic_or_address_operand): Use it instead of address_operand.
        * config/mmix/mmix.c: #include tm-constrs.h.
        (mmix_intval): Delete declaration.  Make non-static.
        (mmix_const_ok_for_letter_p, mmix_extra_constraint): Delete.
        (mmix_const_double_ok_for_letter_p): Delete.
        (mmix_legitimate_address_p): Use satisfies_constraint_I.
        (mmix_print_operand_address): Likewise.
        (mmix_emit_sp_add): Adjust to use insn_const_int_ok_for_constraint
        when matching "L" constraint.

2012-09-11  Steven Bosscher  <steven@gcc.gnu.org>

        * tree.h (expand_case): Move prototype ...
        * expr.h (expand_case): ...here.
        (expand_sjlj_dispatch_table): New prototype.
        * stmt.c: Include pointer-set.h instead of bitmap.h.
        (expand_case): Use a pointer set instead of a bitmap for
        already-seen labels.  Fold label values here.
        (add_case_node): Don't fold label values here.
        (expand_sjlj_dispatch_table): New function.
        * except.c (sjlj_emit_dispatch_table): Use it.

2012-09-11  Marc Glisse  <marc.glisse@inria.fr>

        * tree-ssa-forwprop.c (simplify_vector_constructor): New function.
        (ssa_forward_propagate_and_combine): Call it.

2012-09-11  Diego Novillo  <dnovillo@google.com>

        * var-tracking.c (vt_add_function_parameter): Adjust for VEC changes.

2012-09-11  Dominique Dhumieres  <dominiq@lps.ens.fr>

        * config/darwin.c (darwin_asm_named_section): Adjust for VEC changes.
        (darwin_asm_dwarf_section): Likewise.

2012-09-11  Martin Jambor  <mjambor@suse.cz>

        * dwarf2out.c (dwarf2out_abstract_function): Do not change cfun.
        (premark_used_types): New parameter fun, use it instead of cfun.
        (gen_subprogram_die): Use DECL_STRUCT_FUNCTION (decl) instead of cfun,
        also pass it to premark_used_types.

2012-09-11  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

        * doc/sourcebuild.texi (arm_neon_v2_ok): Adjust command line.

2012-09-11  Tobias Burnus  <burnus@net-b.de>

        * doc/sourcebuild.texi (arm_neon_v2_ok): Fix @anchor.

2012-09-11  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>
            Matthew Gretton-Dann  <matthew.gretton-dann@arm.com>

        * config/arm/neon.md (fma<VCVTF:mode>4): New pattern.
        (*fmsub<VCVTF:mode>4): Likewise.
        * doc/sourcebuild.texi (arm_neon_v2_ok, arm_neon_v2_hw):  Document it.

2012-09-11  Aldy Hernandez  <aldyh@redhat.com>

        PR middle-end/54149
        * tree-ssa-loop-im.c (execute_sm_if_changed_flag_set): Only set
        flag for writes.

2012-09-11  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

        PR tree-optimization/55492
        * doc/invoke.texi (max-slsr-cand-scan): New description.
        * gimple-ssa-strength-reduction.c (find_basis_for_candidate): Limit
        the time spent searching for a basis.
        * params.def (PARAM_MAX_SLSR_CANDIDATE_SCAN): New param.

2012-09-11  Richard Guenther  <rguenther@suse.de>

        * gimple.h (gimple_register_type): Remove.
        (print_gimple_types_stats): Adjust prototype.
        * lto-streamer.h (print_lto_report): Likewise.
        * lto-streamer.c (print_lto_report): Adjust.
        * gimple.c (gimple_types, type_hash_cache, enum gtc_mode,
        struct type_pair_d, lookup_type_pair, struct sccs,
        next_dfs_num, gtc_next_dfs_num, struct gimple_type_leader_entry_s,
        gimple_type_leader, gimple_lookup_type_leader, compare_type_names_p,
        gtc_visit, gimple_types_compatible_p_1, gimple_types_compatible_p,
        visit, iterative_hash_name, struct type_hash_pair,
        type_hash_pair_compare, iterative_hash_gimple_type, gimple_type_hash,
        gimple_type_eq, gimple_register_type_1, gimple_register_type):
        Move to lto/lto.c.
        (print_gimple_types_stats): Adjust.
        (free_gimple_type_tables): Likewise.

2012-09-11  Richard Guenther  <rguenther@suse.de>

        * graphite-scop-detection.c (move_sd_regions): Adjust for VEC changes.
        (scopdet_basic_block_info): Likewise.
        (build_scops_1): Likewise.
        (limit_scops): Likewise.

2012-09-11  Richard Guenther  <rguenther@suse.de>

        PR middle-end/54515
        * gimple.c (get_base_address): Do not return NULL_TREE apart
        from for WITH_SIZE_EXPR.
        * gimple-fold.c (canonicalize_constructor_val): Do not call
        get_base_address when not necessary.

2012-09-10  Andrew Pinski  <apinski@cavium.com>

        PR tree-opt/54362
        * trans-mem.c (thread_private_new_memory): Handle COND_EXPR also.

2012-09-10  Maxim Kuvyrkov  <maxim@codesourcery.com>

        * config/m68k/m68k.c (m68k_sched_dfa_post_advance_cycle): Support
        starting scheduling from a pre-existing state.

2012-09-10  Diego Novillo  <dnovillo@google.com>

        * vec.h (vec_t::quick_push): Remove overload that accepts 'T *'.
        Update all users.
        (vec_t::safe_push): Likewise.
        (vec_t::quick_insert): Likewise.
        (vec_t::lower_bound): Likewise.
        (vec_t::safe_insert): Likewise.
        (vec_t::replace): Change second argument to 'T &'.

2012-09-10  Maciej W. Rozycki  <macro@codesourcery.com>

        * config/rs6000/rs6000.md: Move a splitter next to its insn.

2012-09-10  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54089
        * config/sh/sh.h (SH_DYNAMIC_SHIFT_COST): Set always to 1 if
        dynamic shifts are available.
        (SHIFT_COUNT_TRUNCATED): Always define to 0.  Correct comment.
        * config/sh/sh.c (ashl_lshr_seq, ext_ashl_lshr_seq): Add comments.
        * config/sh/predicates.md (shift_count_operand): Allow
        arith_reg_operand even if TARGET_DYNSHIFT is false.
        * config/sh/sh.md (ashlsi3, lshrsi3): Expand library call patterns
        if needed.
        (ashlsi3_d_call, lshrsi3_d_call): New insns.

2012-09-10  Richard Sandiford  <rdsandiford@googlemail.com>

        * ira.c (setup_pressure_classes): Handle synonymous classes.

2012-09-10  Marc Glisse  <marc.glisse@inria.fr>

        * tree-ssa-forwprop.c (simplify_bitfield_ref): New function.
        (ssa_forward_propagate_and_combine): Call it.

2012-09-10  Steve Ellcey  <sellcey@mips.com>

        * config.gcc: Add mips*-mti-linux* target
        Handle with_synci like other options.
        * config/mips/gnu-user64.h (LINUX64_DRIVER_SELF_SPECS): New.
        (DRIVER_SELF_SPECS): Define in terms of LINUX64_DRIVER_SELF_SPECS.
        * config/mips/mips.h (MIPS_ISA_SYNCI_SPEC): New.
        * config/mips/mti-linux.h: New file.
        * config/mips/t-mti-linux: New file.

2012-09-10  Marc Glisse  <marc.glisse@inria.fr>

        * tree-ssa-forwprop.c (simplify_permutation): Handle CONSTRUCTOR.

2012-09-10  Martin Jambor  <mjambor@suse.cz>

        * params.def (PARAM_IPA_MAX_AGG_ITEMS): New parameter.
        * ipa-prop.c: Include params.h.
        (IPA_MAX_AFF_JF_ITEMS): Removed.
        (determine_known_aggregate_parts): Use param value of
        PARAM_IPA_MAX_AGG_ITEMS instead of IPA_MAX_AFF_JF_ITEMS.
        * Makefile.in (ipa-prop.o): Add PARAMS_H dependency.

2012-09-10  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/54520
        * tree-ssa-threadupdate.c (def_split_header_continue_p):
        Properly consider sub-loops.

2012-09-10  Richard Henderson  <rth@redhat.com>

        * config/alpha/predicates.md (small_symbolic_operand): Disallow
        large offsets.

2012-09-10  Georg-Johann Lay  <avr@gjlay.de>

        PR target/54536
        * config/avr/avr-mcus.def (at90usb1287): Set LIBRARY_NAME to "usb1287".

2012-09-10  Jan Hubicka  <jh@suse.cz>

        * lto-cgraph.c (compute_ltrans_boundary): Do not care about aliases.
        * symtab.c (symtab_make_decl_local): Remove user defined visibility
        when making symbol local.

2012-09-09  Mark Kettenis  <kettenis@gnu.org>

        * config/openbsd-stdint.h (INTMAX_TYPE, UINTMAX_TYPE): Define.

2012-09-09  Jan Hubicka  <jh@suse.cz>

        * passes.c (ipa_write_summaries_1): Set state;
        do not call compute_ltrans_boundary.
        (ipa_write_optimization_summaries): Likewise.
        (ipa_write_summaries): compute_ltrans_boundary here.
        * lto-streamer.h (lto_symtab_encoder_d): NODES are allocated in heap.
        (compute_ltrans_boundary): Update prototype.

2012-09-09  Ulrich Drepper  <drepper@gmail.com>

        * config/i386/cpuid.h: Define signature_*_e[bcd]x macros for
        matching results of level 0 calls to __cpuid to processor
        manufacturers.
        * config/i386/driver-i386.c (vendor_signatures): Removed.
        (processor_signatures): Removed.
        (host_detect_local_cpu): Replace uses of now-removed SIG_*
        constants with the new signature_*_ebx constants.

2012-09-08  Jan Hubicka  <jh@suse.cz>

        Replace cgraph_node_set and varpool_node_set by symtab_node_encoder
        in partitioning.
        * tree-pass.h (cgraph_node_set_def, varpool_node_set_def): Remove
        forward declaration.
        (lto_symtab_encoder_d): Forward declare.
        (ipa_write_optimization_summaries): Update.
        * lto-cgraph.c (lto_symtab_encoder_new): Do not initialize
        body, initializer and in_partition.
        (lto_symtab_encoder_delete): Update.
        (lto_symtab_encoder_encode): Update.
        (lto_symtab_encoder_lookup): Move inline.
        (lto_symtab_encoder_delete_node): New function.
        (lto_symtab_encoder_encode_body_p, lto_set_symtab_encoder_encode_body,
        lto_symtab_encoder_encode_initializer_p,
        lto_set_symtab_encoder_encode_initializer,
        lto_symtab_encoder_in_partition_p,
        lto_symtab_encoder_in_partition_p): Update.
        (compute_ltrans_boundary): Take encoder as an input.
        * passes.c (ipa_write_summaries_1): Update.
        (ipa_write_summaries_1): Update.
        (ipa_write_summaries): Update.
        (ipa_write_optimization_summaries): Update.
        * lto-streamer.c (print_lto_report): Report number of cgraph nodes.
        * lto-streamer.h (lto_stats_d): Replace num_output_cgraph_nodes by
        num_output_symtab_nodes.
        (lto_encoder_entry): New structure.
        (struct lto_symtab_encoder_d): Reorg.
        (lto_symtab_encoder_delete_node): Declare.
        (lto_symtab_encoder_lookup): Bring inline.
        (compute_ltrans_boundary): Update.
        (lto_symtab_encoder_size): Update.
        (lsei_node, lsei_cgraph_node, lsei_varpool_node): Update.
        (lto_symtab_encoder_deref): Update.

2012-09-08  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        * config/pa/pa.c (hppa_rtx_costs): Update costs for large
        integer modes.

2012-09-08  Andi Kleen  <ak@linux.intel.com>

        * lto/lto.c (do_whole_program_analysis): Fix last broken patch.

2012-09-08  Andi Kleen  <ak@linux.intel.com>

        * common.opt (-fmem-report-wpa): Add
        * doc/invoke.texi (-fmem-report-wpa): Document.
        * lto/lto.c (do_whole_program_analysis): Run mem_report
        when mem_report_wpa is set.

2012-09-07  Anthony Green  <green@moxielogic.com>

        * config/moxie/moxie.c (moxie_expand_prologue): Optimize prologue
        for functions with large static stack requirements.
        (moxie_expand_epilogue): Use $r12 instead of $r5 for pulling saved
        values off of the stack.

2012-09-07  Nick Clifton  <nickc@redhat.com>

        * config/v850/v850.h (DBX_DEBUGGING_INFO): Define.
        (ASM_GENERATE_INTERNAL_LABEL): Define if not already provided.
        * config/v850/v850.c (compute_register_save_size): Always include
        the link pointer.
        (increment_stack): New function - emits insns to increment or
        decrement the stack pointer.
        (expand_prologue, expand_epilogue): Use it.
        (expand_prologue): Set the function stack size, if requested.
        (v850_debug_unwind_info): New function.
        (TARGET_DEBUG_UNWIND_INFO): Define.

2012-09-07  Richard Earnshaw  <rearnsha@arm.com>

        PR tree-ssa/54295
        * tree-ssa-math-opts.c (widening_mult_conversion_strippable_p):
        Sign-extension of a zero-extended value can be simplified to
        just zero-extension.

2012-09-07  Richard Guenther  <rguenther@suse.de>

        PR middle-end/53667
        * tree-ssa-structalias.c (handle_rhs_call): Properly clobber
        EAF_NOESCAPED arguments.  Transitively close non-EAF_DIRECT
        arguments separately.

2012-09-07  Steven Bosscher  <steven@gcc.gnu.org>

        * bitmap.c (bitmap_last_set_bit): Rewrite to return the correct bit.

        * graphite.c (print_global_statistics): Use EDGE_COUNT instead
        of VEC_length.
        (print_graphite_scop_statistics): Likewise.
        * graphite-scop-detection.c (get_bb_type): Use single_succ_p.
        (print_graphite_scop_statistics): Use EDGE_COUNT, not VEC_length.
        (canonicalize_loop_closed_ssa): Use single_pred_p.

        * alias.c (reg_seen): Make this an sbitmap.
        (record_set, init_alias_analysis): Update.

        * tree-ssa-coalesce.c (ssa_conflicts_dump): Fix dumping.

2012-09-07  Tom de Vries  <tom@codesourcery.com>

        PR tree-optimization/53986
        * tree-vrp.c (extract_range_from_multiplicative_op_1): Allow
        LSHIFT_EXPR.
        (extract_range_from_binary_expr_1): Handle LSHIFT with constant
        range as shift amount.

2012-09-07  Segher Boessenkool  <segher@kernel.crashing.org>

        * config/rs6000/aix43.h (RS6000_CALL_GLUE): Delete.
        * config/rs6000/aix51.h (RS6000_CALL_GLUE): Delete.
        * config/rs6000/aix52.h (RS6000_CALL_GLUE): Delete.
        * config/rs6000/aix53.h (RS6000_CALL_GLUE): Delete.
        * config/rs6000/aix61.h (RS6000_CALL_GLUE): Delete.
        * config/rs6000/freebsd64.h (RS6000_CALL_GLUE): Delete.
        * config/rs6000/linux64.h (RS6000_CALL_GLUE): Delete.
        * config/rs6000/rs6000.c (print_operand) ['.']: Delete.
        * config/rs6000/rs6000.h (RS6000_CALL_GLUE): Delete.
        * config/rs6000/rs6000.md (tls_gd_aix<TLSmode:tls_abi_suffix>):
        Replace %. with nop.
        (tls_gd_call_aix<TLSmode:tls_abi_suffix>): Ditto.
        (tls_ld_aix<TLSmode:tls_abi_suffix>): Ditto.
        (tls_ld_call_aix<TLSmode:tls_abi_suffix>): Ditto.
        (call_nonlocal_aix32): Ditto.
        (call_nonlocal_aix64): Ditto.
        (call_value_nonlocal_aix32): Ditto.
        (call_value_nonlocal_aix64): Ditto.

2012-09-06  Andi Kleen  <ak@linux.intel.com>

        * doc/invoke.texi (-ffat-lto-objects): Clarify that gcc-ar
        et.al. should be used.

2012-09-06  Andi Kleen  <ak@linux.intel.com>

        * lto-streamer.h (res_pair): Add.
        (lto_file_decl_data): Replace resolutions with respairs.
        Add max_index.
        * lto/lto.c (lto_resolution_read): Remove max_index.  Add rp.
        Initialize respairs.
        (lto_file_finalize): Set up resolutions vector lazily from respairs.

2012-09-06  Lawrence Crowl  <crowl@google.com>

        * double-int.h (double_int::operator &=): New.
        (double_int::operator ^=): New.
        (double_int::operator |=): New.
        (double_int::mul_with_sign): Modify overflow parameter to bool*.
        (double_int::add_with_sign): New.
        (double_int::ule): New.
        (double_int::sle): New.
        (binary double_int::operator *): Remove parameter name.
        (binary double_int::operator +): Likewise.
        (binary double_int::operator -): Likewise.
        (binary double_int::operator &): Likewise.
        (double_int::operator |): Likewise.
        (double_int::operator ^): Likewise.
        (double_int::and_not): Likewise.
        (double_int::from_shwi): Tidy formatting.
        (double_int::from_uhwi): Likewise.
        (double_int::from_uhwi): Likewise.
        * double-int.c (double_int::mul_with_sign): Modify overflow parameter
        to bool*.
        (double_int::add_with_sign): New.
        (double_int::ule): New.
        (double_int::sle): New.
        * builtins.c: Modify to use the new double_int interface.
        * cgraph.c: Likewise.
        * combine.c: Likewise.
        * dwarf2out.c: Likewise.
        * emit-rtl.c: Likewise.
        * expmed.c: Likewise.
        * expr.c: Likewise.
        * fixed-value.c: Likewise.
        * fold-const.c: Likewise.
        * gimple-fold.c: Likewise.
        * gimple-ssa-strength-reduction.c: Likewise.
        * gimplify-rtx.c: Likewise.
        * ipa-prop.c: Likewise.
        * loop-iv.c: Likewise.
        * optabs.c: Likewise.
        * stor-layout.c: Likewise.
        * tree-affine.c: Likewise.
        * tree-cfg.c: Likewise.
        * tree-dfa.c: Likewise.
        * tree-flow-inline.h: Likewise.
        * tree-object-size.c: Likewise.
        * tree-predcom.c: Likewise.
        * tree-pretty-print.c: Likewise.
        * tree-sra.c: Likewise.
        * tree-ssa-address.c: Likewise.
        * tree-ssa-alias.c: Likewise.
        * tree-ssa-ccp.c: Likewise.
        * tree-ssa-forwprop.c: Likewise.
        * tree-ssa-loop-ivopts.c: Likewise.
        * tree-ssa-loop-niter.c: Likewise.
        * tree-ssa-phiopt.c: Likewise.
        * tree-ssa-pre.c: Likewise.
        * tree-ssa-sccvn: Likewise.
        * tree-ssa-structalias.c: Likewise.
        * tree-ssa.c: Likewise.
        * tree-switch-conversion.c: Likewise.
        * tree-vect-loop-manip.c: Likewise.
        * tree-vrp.c: Likewise.
        * tree.h: Likewise.
        * tree.c: Likewise.
        * varasm.c: Likewise.

2012-09-06  Uros Bizjak  <ubizjak@gmail.com>

        * configure.ac (hle prefixes): Remove .code64 directive.
        * configure: Regenerated.

2012-09-06  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

        * config/arm/arm.c: Use CONST_INT_P, CONST_DOUBLE_P, REG_P, MEM_P,
        LABEL_P, JUMP_P, CALL_P, NOTE_P, BARRIER_P consistently.
        * config/arm/arm.h: Use REG_P, MEM_P consistently.
        * config/arm/arm.md: Use CONST_INT_P, REG_P, MEM_P, CONST_DOUBLE_P
        consistently.
        * config/arm/neon.md: Use REG_P consistently.
        * config/arm/predicates.md: Use CONST_INT_P, REG_P, MEM_P consistently.
        * config/arm/thumb2.md: Use CONST_INT_P, REG_P consistently.
        * config/arm/vec-common.md: Use REG_P consistently.

2012-09-06  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/54498
        * tree-ssa-alias.h (get_continuation_for_phi): Add flag to
        abort when reaching an already visited region.
        * tree-ssa-alias.c (maybe_skip_until): Likewise.  And do it.
        (get_continuation_for_phi_1): Likewise.
        (walk_non_aliased_vuses): When we translated the reference,
        abort when we re-visit a region.
        * tree-ssa-pre.c (translate_vuse_through_block): Adjust.

2012-09-06  David Edelsohn  <dje.gcc@gmail.com>

        * config/rs6000/rs6000.c (rs6000_xcoff_asm_named_section): Add TLS
        section.
        * config/rs6000/rs6000.c (rs6000_debug_address_cost): Add new
        arguments to TARGET_ADDRESS_COST call.

2012-09-06  Richard Guenther  <rguenther@suse.de>

        * tree.h (MOVE_NONTEMPORAL): Remove.
        * tree-pretty-print.c (dump_generic_node): Remove
        MOVE_NONTEMPORAL handling.
        * expr.c (expand_expr_real_1): Likewise.

2012-09-06  Richard Guenther  <rguenther@suse.de>

        * passes.c (execute_function_todo): Call compute_may_aliases
        only if flag_tree_pta is set.

2012-09-06  Andrew Pinski  <apinski@cavium.com>

        PR tree-opt/54494
        * tree-inline.c (remap_gimple_op_r): Copy TREE_SIDE_EFFECTS also.

2012-09-06  Jakub Jelinek  <jakub@redhat.com>

        PR rtl-optimization/54455
        * sel-sched-ir.c (maybe_tidy_empty_bb): Give up if previous fallthru
        bb ends up with asm goto referencing bb's label.

2012-09-06  Chen Liqin  <liqin.gcc@gmail.com>

        * config/score/score.c: Remove TARGET_LEGITIMIZE_ADDRESS define and
        score_legitimize_address function, use compiler default code instead.

2012-09-05  Jan Hubicka  <jh@suse.cz>

        * ipa-inline.c (want_inline_small_function_p): Use
        INLINE_HINT_loop_iterations hint.

2012-09-05  Andrew Pinski  <apinski@cavium.com>

        * optabs.c (emit_conditional_add): Correct comment about the arguments.
        Remove code which might swap op2 and op3 since they cannot be swapped.
        * doc/md.texi (add@var{mode}cc): Fix document about how the arguments
        are used.

2012-09-05  Oleg Endo  <olegendo@gcc.gnu.org>

        * hooks.c (hook_int_rtx_mode_as_bool_0): New function.
        * hooks.h (hook_int_rtx_mode_as_bool_0): Declare it.
        * output.h (default_address_cost): Add machine_mode and address space
        arguments.
        * target.def (address_cost): Likewise.
        * rtlanal.c (address_cost): Pass mode and address space to target hook.
        (default_address_cost): Add unnamed machine_mode and address space
        arguments.
        * doc/tm.texi: Regenerate.
        * config/alpha/alpha.c (TARGET_ADDRESS_COST): Use
        hook_int_rtx_mode_as_bool_0 instead of hook_int_rtx_bool_0.
        * config/arm/arm.c (arm_address_cost): Add machine_mode and address
        space arguments.
        * config/avr/avr.c (avr_address_cost): Likewise.
        * config/bfin/bfin.c (bfin_address_cost): Likewise.
        * config/cr16/cr16.c (cr16_address_cost): Likewise.
        * config/cris/cris.c (cris_address_cost): Likewise.
        * config/epiphany/epiphany.c (epiphany_address_cost): Likewise.
        * config/i386/i386.c (ix86_address_cost): Likewise.
        * config/ia64/ia64.c (TARGET_ADDRESS_COST): Use
        hook_int_rtx_mode_as_bool_0 instead of hook_int_rtx_bool_0.
        * config/iq2000/iq2000.c (iq2000_address_cost): Add machine_mode and
        address space arguments.  Pass them on in recursive invocation.
        * config/lm32/lm32.c (TARGET_ADDRESS_COST): Use
        hook_int_rtx_mode_as_bool_0 instead of hook_int_rtx_bool_0.
        * config/m32c/m32c.c (m32c_address_cost): Add machine_mode and address
        space arguments.
        * config/m32r/m32r.c (TARGET_ADDRESS_COST): Use
        hook_int_rtx_mode_as_bool_0 instead of hook_int_rtx_bool_0.
        * config/mcore/mcore.c (TARGET_ADDRESS_COST): Likewise.
        * config/mep/mep.c (mep_address_cost): Add machine_mode and address
        space arguments.
        * config/microblaze/microblaze.c (microblaze_address_cost): Likewise.
        * config/mips/mips.c (mips_address_cost): Likewise.
        * config/mmix/mmix.c (TARGET_ADDRESS_COST): Use
        hook_int_rtx_mode_as_bool_0 instead of hook_int_rtx_bool_0.
        * config/mn10300/mn10300.c (mn10300_address_cost): Add machine_mode and
        address space arguments.
        (mn10300_rtx_costs): Pass GET_MODE (x) and MEM_ADDR_SPACE (x) to
        mn10300_address_cost.
        * config/pa/pa.c (hppa_address_cost): Add machine_mode and address
        space arguments.
        * config/rs6000/rs6000.c (rs6000_debug_address_cost): Likewise.
        (TARGET_ADDRESS_COST): Use hook_int_rtx_mode_as_bool_0 instead of
        hook_int_rtx_bool_0.
        * config/rx/rx.c (rx_address_cost): Add machine_mode and address
        space arguments.
        * config/s390/s390.c (s390_address_cost): Likewise.
        * config/score/score-protos.h (score_address_cost): Likewise.
        * config/score/score.c (score_address_cost): Likewise.
        * config/sh/sh.c (sh_address_cost): Likewise.
        * config/sparc/sparc.c (TARGET_ADDRESS_COST): Use
        hook_int_rtx_mode_as_bool_0 instead of hook_int_rtx_bool_0.
        * config/spu/spu.c (TARGET_ADDRESS_COST): Likewise.
        * config/stormy16/stormy16.c (xstormy16_address_cost): Add machine_mode
        and address space arguments.
        * config/v850/v850.c (TARGET_ADDRESS_COST): Use
        hook_int_rtx_mode_as_bool_0 instead of hook_int_rtx_bool_0.
        * config/vax/vax.c (vax_address_cost): Add machine_mode and address
        space arguments.
        * config/xtensa/xtensa (TARGET_ADDRESS_COST): Use
        hook_int_rtx_mode_as_bool_0 instead of hook_int_rtx_bool_0.

2012-09-05  Diego Novillo  <dnovillo@google.com>

        PR bootstrap/54484
        * vec.h (vec_t::lower_bound): Fix spelling of LESSTHAN argument.

2012-09-05  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/54486
        * builtins.c (fold_builtin_strspn, fold_builtin_strcspn): Use
        build_int_cst with size_type_node instead of size_int.

2012-09-05  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/sse.md (<sse4_1>_blendv<ssemodesuffix><avxsizesuffix>):
        Use register_operand instead of reg_not_xmm0_operand{,_maybe_avx}.
        Use nonimmediate_operand instead of
        nonimm_not_xmm0_operand{,_maybe_avx}.
        (<sse4_1_avx2>_pblendvb): Ditto.
        (sse4_2_pcmpestr): Ditto.
        (*sse4_2_pcmpestr_unaligned): Ditto.
        (sse4_2_pcmpistr): Ditto.
        (*sse4_2_pcmpistr_unaligned): Ditto.
        * config/i386/predicates.md (reg_not_xmm0_operand): Remove predicate.
        (nonimm_not_xmm0_operand): Ditto.
        (nonimm_not_xmm0_operand_maybe_avx): Ditto.
        (nonimm_not_xmm0_operand_maybe_avx): Ditto.
        * config/i386/i386.md (rdpmc): Do not force operand 1 into ecx.

2012-09-05  Eric Botcazou  <ebotcazou@adacore.com>

        * bb-reorder.c: Clarify a few points in the head comment and fix
        long lines in other comments.
        (find_traces): Fix long line.
        (find_traces_1_round): Likewise.
        (better_edge_p): Likewise.
        (connect_traces): Likewise.
        (duplicate_computed_gotos): Likewise.
        (find_rarely_executed_basic_blocks_and_cr): Remove trailing spaces.
        (fix_up_fall_thru_edges): Fix formatting.

2012-09-05  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/46590
        * tree-ssa-loop-ivcanon.c (try_unroll_loop_completely): Do not
        update SSA form here.
        (canonicalize_induction_variables): Assert we do not need to
        update SSA form.
        (tree_unroll_loops_completely): Update SSA form here.
        * tree-ssa-loop-manip.c (gimple_duplicate_loop_to_header_edge):
        Do not verify loop-closed SSA form if SSA form is not up-to-date.

2012-09-05  Georg-Johann Lay  <avr@gjlay.de>

        PR target/54461
        * config.gcc (tm_file,target=avr-*-*): Add avr/avrlibc.h if
        not configured --with-avrlibc=no.
        (tm_defines,target=avr-*-*): Add WITH_AVRLIBC if not configured
        --with-avrlibc=no.
        * config/avr/avrlibc.h: New file.
        * config/avr/avr-c.c: Build-in define __WITH_AVRLIBC__ if
        not configured --with-avrlibc=no.
        * doc/invoke.texi (AVR Built-in Macros): Document __WITH_AVRLIBC__

2012-09-04  Teresa Johnson  <tejohnson@google.com>

        * gcov-io.c (gcov_write_summary): Write out non-zero histogram
        entries to function summary along with an occupancy bit vector.
        (gcov_read_summary): Read in the histogram entries.
        (gcov_histo_index): New function.
        (void gcov_histogram_merge): Ditto.
        * gcov-io.h (gcov_type_unsigned): New type.
        (struct gcov_bucket_type): Ditto.
        (struct gcov_ctr_summary): Include histogram.
        (GCOV_TAG_SUMMARY_LENGTH): Update to include histogram entries.
        (GCOV_HISTOGRAM_SIZE): New macro.
        (GCOV_HISTOGRAM_BITVECTOR_SIZE): Ditto.
        * profile.c (NUM_GCOV_WORKING_SETS): Ditto.
        (gcov_working_sets): New global variable.
        (compute_working_sets): New function.
        (find_working_set): Ditto.
        (get_exec_counts): Invoke compute_working_sets.
        * coverage.c (read_counts_file): Merge histograms, and
        fix bug with accessing summary info for non-summable counters.
        * basic-block.h (gcov_type_unsigned): New type.
        (struct gcov_working_set_info): Ditto.
        (find_working_set): Declare.
        * gcov-dump.c (tag_summary): Dump out histogram.

2012-09-04  Diego Novillo  <dnovillo@google.com>

        PR bootstrap/54484
        * vec.h (vec_t::embedded_init): Move default argument value
        to function declaration.

2012-09-04  Eric Botcazou  <ebotcazou@adacore.com>

        * bb-reorder.c (gate_handle_reorder_blocks): Move around.
        (rest_of_handle_reorder_blocks): Likewise.
        (pass_reorder_blocks): Likewise.
        (gate_handle_partition_blocks): Likewise.

2012-09-04  Eric Botcazou  <ebotcazou@adacore.com>

        PR rtl-optimization/54456
        * sched-rgn.c (gate_handle_sched): Return 1 only if optimize > 0.

2012-09-04  Diego Novillo  <dnovillo@google.com>

        PR bootstrap/54478
        * vec.h (vec_t::alloc): Remove explicit type specification
        in call to reserve.
        (vec_t::copy): Likewise.
        (vec_t::reserve): Likewise.
        (vec_t::reserve_exact): Likewise.
        (vec_t::safe_splice): Likewise.
        (vec_t::safe_push): Likewise.
        (vec_t::safe_grow): Likewise.
        (vec_t::safe_grow_cleared): Likewise.
        (vec_t::safe_insert): Likewise.

2012-09-04  Richard Henderson  <rth@redhat.com>

        * alias.c (read_dependence): Return true for ALIAS_SET_MEMORY_BARRIER.

2012-09-04  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-pre.c (value_expressions): Make it a vector of
        bitmaps containing expression IDs.
        (add_to_value): Adjust.
        (sorted_array_from_bitmap_set): Likewise.
        (bitmap_set_replace_value): Likewise.
        (print_value_expressions): Likewise.
        (get_constant_for_value_id): Likewise.
        (get_representative_for): Likewise.
        (phi_translate_1): Likewise.
        (bitmap_find_leader): Likewise.
        (find_or_generate_expression): Likewise.
        (do_regular_insertion): Likewise.
        (init_pre): Likewise.
        (fini_pre): Likewise.

2012-09-04  Diego Novillo  <dnovillo@google.com>

        PR bootstrap/54479
        * vec.h (vec_t::copy): Add cast in call to reserve_exact.

2012-09-04  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-pre.c (add_to_exp_gen): Adjust.
        (make_values_for_phi): Do not add to PHI_GEN for FRE.
        (compute_avail): Stop processing after adding all defs to
        AVAIL_OUT for FRE.
        (init_pre): Do not allocate not needed bitmap sets for FRE.

2012-09-04  Diego Novillo  <dnovillo@google.com>

        Rewrite VEC_* functions as member functions of vec_t.

        * vec.h: Update documentation.
        (ALONE_VEC_CHECK_INFO): Define.
        (ALONE_VEC_CHECK_DECL): Define.
        (ALONE_VEC_CHECK_PASS): Define.
        (struct vec_prefix): Rename field NUM to NUM_.
        Rename field ALLOC to ALLOC_.
        Update all users.
        (struct vec_t): Rename field PREFIX to PREFIX_.
        Rename field VEC to VEC_.
        Update all users.
        (vec_t::length): Rename from VEC_length_1.  Update all users.
        (vec_t::empty): Rename from VEC_empty_1.  Update all users.
        (vec_t::address): Rename from VEC_address_1.  Update all users.
        (vec_address): New.
        (vec_t::last): Rename from VEC_last_1.  Update all users.
        (vec_t::operator[]): Rename from VEC_index_1.  Update all users.
        (vec_t::iterate): Rename from VEC_iterate_1.  Update all users.
        (vec_t::embedded_size): Rename from VEC_embedded_size_1.
        Update all users.
        (vec_t::embedded_init): Rename from VEC_embedded_init_1.
        Update all users.
        (vec_t::alloc): Rename from VEC_alloc_1.  Update all users.
        (vec_t::free): Rename from VEC_free_1.  Update all users.
        (vec_t::copy): Rename from VEC_copy_1.  Update all users.
        (vec_t::space): Rename from VEC_space_1.  Update all users.
        (vec_t::reserve): Rename from VEC_reserve_1.  Update all users.
        (vec_t::reserve_exact): Rename from VEC_reserve_exact_1.
        Update all users.
        (vec_t::splice): Rename from VEC_splice_1.  Update all users.
        (vec_t::safe_splice): Rename from VEC_safe_splice_1.  Update all users.
        (vec_t::quick_push): Rename from VEC_quick_push_1.  Update all users.
        (vec_t::safe_push): Rename from VEC_safe_push_1.  Update all users.
        (vec_t::pop): Rename from VEC_pop_1.  Update all users.
        (vec_t::truncate): Rename from VEC_truncate_1.  Update all users.
        (vec_t::safe_grow): Rename from VEC_safe_grow_1.  Update all users.
        (vec_t::safe_grow_cleared): Rename from VEC_safe_grow_cleared_1.
        Update all users.
        (vec_t::replace): Rename from VEC_replace_1.  Update all users.
        (vec_t::quick_insert): Rename from VEC_quick_insert_1.
        Update all users.
        (vec_t::safe_insert): Rename from VEC_safe_insert_1.  Update all users.
        (vec_t::ordered_remove): Rename from VEC_ordered_remove_1.
        Update all users.
        (vec_t::unordered_remove): Rename from VEC_unordered_remove_1.
        Update all users.
        (vec_t::block_remove): Rename from VEC_block_remove_1. Update all users.
        (vec_t::lower_bound): Rename from VEC_lower_bound_1. Update all users.

2012-09-04  Steven Bosscher  <steven@gcc.gnu.org>

        * gimple.h (gimple_build_switch): Remove.
        (gimple_build_switch_vec): Promote to the new gimple_build_switch.
        (gimple_switch_default_label): Assert the default case label is
        really a default case label.
        (gimple_switch_set_default_label): Likewise.
        * gimple.c (gimple_build_switch_nlabels): Make sure a default label
        is passed in, and simplify accordingly.
        (gimple_build_switch): Removed.
        (gimple_build_switch_vec): Rename to gimple_build_switch.
        * gimplify.c (gimplify_switch_expr): Update gimple_build_switch use.
        * gimple-pretty-print.c (dump_gimple_switch): Do not accept a NULL
        case label.
        * stmt.c (expand_case): Simplify using the fact that every GIMPLE
        switch must have a default case.
        * tree-cfg.c (group_case_labels_stmt): Likewise.
        (verify_gimple_switch): Use gimple_switch_label in verifier to get
        the label at index 0, and verify that it is a valid default case.
        * except.c (sjlj_emit_dispatch_table): Rewrite construction of the
        switch for dispatching.
        * tree-eh.c (lower_try_finally_switch): Update gimple_build_switch use.
        (lower_eh_dispatch): Likewise.
        * tree-vrp.c (execute_vrp): Use gimple_switch_label to get the case
        label at index 0 before turning it into a default case label.
        * omp-low.c (expand_omp_sections): Update gimple_build_switch use.
        * tree-switch-conversion.c (emit_case_bit_tests): Get the default case
        label using gimple_switch_default_label.
        (collect_switch_conv_info): Likewise.
        (process_switch): Likewise.
        * doc/gimple.texi: Update documentation of gimple_build_switch.

2012-09-04  Georg-Johann Lay  <avr@gjlay.de>

        PR target/54476
        * config/avr/avr.c (avr_expand_delay_cycles): Mask operand with
        SImode.

2012-09-04  Bin Cheng  <bin.cheng@arm.com>

        PR target/45070
        * config/arm/arm.c (thumb1_extra_regs_pushed): Handle return value
        of size less than 4 bytes by using macro ARM_NUM_INTS.
        (thumb1_unexpanded_epilogue): Use macro ARM_NUM_INTS.

2012-09-04  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/54458
        * tree-ssa-threadupdate.c (thread_through_loop_header): If we
        turn the loop into one with multiple latches mark it so.

2012-09-04  Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>

        PR target/54220
        * config/avr/avr.c (TARGET_ALLOCATE_STACK_SLOTS_FOR_ARGS): New
        define to...
        (avr_allocate_stack_slots_for_args): ...this new static function.

2012-09-04  Christophe Lyon  <christophe.lyon@linaro.org>

        * config/arm/arm.c (arm_expand_builtin): Replace gen_rtx_CONST_INT
        by GEN_INT.
        (arm_emit_coreregs_64bit_shift): Likewise.

2012-09-04  Christophe Lyon  <christophe.lyon@linaro.org>

        * config/arm/arm.c (arm_evpc_neon_vext): New function.
        (arm_expand_vec_perm_const_1): Add call to arm_evpc_neon_vext.

2012-09-04  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/51244
        * config/sh/sh.c (prepare_cbranch_operands): Pull out comparison
        canonicalization code into...
        * (sh_canonicalize_comparison): This new function.
        * config/sh/sh-protos.h: Declare it.
        * config/sh/sh.h: Use it in new macro CANONICALIZE_COMPARISON.
        * config/sh/sh.md (cbranchsi4): Remove TARGET_CBRANCHDI4 check and
        always invoke expand_cbranchsi4.

2012-09-03  Andi Kleen  <ak@linux.intel.com>

        * tree-ssa-sccvn.c (vn_reference_fold_indirect): Initialize
        addr_offset always.

2012-09-03  Andrew Pinski  <apinski@cavium.com>

        PR tree-opt/53395
        * tree-if-conv.c (constant_or_ssa_name): New function.
        (fold_build_cond_expr): New function.
        (predicate_scalar_phi): Use fold_build_cond_expr instead of build3.
        (predicate_mem_writes): Likewise.

2012-09-03  Marc Glisse  <marc.glisse@inria.fr>

        * fold-const.c (fold_ternary_loc): Constant-propagate after
        removing dead operands.

2012-09-03  Michael Matz  <matz@suse.de>

        PR tree-optimization/46590
        * tree-cfg.c (gimple_duplicate_sese_region): Don't update
        SSA web here ...
        * tree-ssa-loop-ch.c (copy_loop_headers): ... but here.

2012-09-03  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/invoke.texi: Fix numerous typos and punctuation/grammatical
        errors throughout the file.  Re-word some awkward sentences and
        paragraphs.

2012-09-03  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/54362
        * tree-ssa-structalias.c (find_func_aliases): Handle COND_EXPR.

2012-09-03  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * config/s390/s390.c (s390_loadrelative_operand_p): New function.
        (s390_check_qrst_address, print_operand_address): Use
        s390_loadrelative_operand_p instead of s390_symref_operand_p.
        (s390_check_symref_alignment): Accept pointer size alignment for
        GOT slots.
        (legitimize_pic_address): Use load relative on z10 or later.

2012-09-03  Jakub Jelinek  <jakub@redhat.com>

        PR debug/53923
        * valtrack.c (dead_debug_insert_temp): Drop non-reg uses
        from the chain.

2012-09-03  Joseph Myers  <joseph@codesourcery.com>

        * common.opt (--no-sysroot-suffix): New driver option.
        * doc/invoke.texi (--no-sysroot-suffix): Document.
        * gcc.c (driver_handle_option): Handle --no-sysroot-suffix as not
        needing spec processing.
        (main): Do not process sysroot suffixes if no_sysroot_suffix.

2012-09-02  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/33135
        * common/config/sh/sh-common.c: Update copyright years.
        (sh_option_init_struct): Delete.
        (TARGET_OPTION_INIT_STRUCT): Likewise.

2012-09-02  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54418
        * config/sh/sh.md (cmpgeusi_t): Remove N alternative.
        Check operands[1] in split condition instead of operands[0].
        Add comments.

2012-09-02  Mark Kettenis  <kettenis@openbsd.org>

        * config.gcc (x86_64-*-openbsd*): New target.
        * config.host (*-*-openbsd*): New target.
        * config/openbsd.h (TARGET_C99_FUNCTIONS): Define.
        * config/i386/openbsdelf.h: Remove some superfluous defines and
        group things together in a more logical fashion.
        (DBX_REGISTER_NUMBER): Provide a
        definition that works on both 32-bit and 64-bit targets.
        (WCHAR_TYPE_SIZE): Hardcode as 32.
        (NO_DOLLAR_IN_LABEL): Remove undef.
        (TARGET_DEFAULT): Remove.
        (SET_ASM_OP): Remove.
        (DEFAULT_PCC_STRUCT_RETURN): Undef first to prevent warning.
        (ASM_OUTPUT_MAX_SKIP_ALIGN): Synch with x86-64.h
        (DWARF2_UNWIND_INFO): Remove define.
        (HAVE_ENABLE_EXECUTE_STACK): Define.
        * config/host-openbsd.c: New file.
        * config/t-openbsd (USER_H): Add EXTRA_HEADERS.
        * config/x-openbsd: New file.

2012-09-02  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.md (*extend<mode>si2_compact_mem_disp): Pass iterated
        mode to sh_legitimate_index_p instead of QImode.

2012-09-02  Eric Botcazou  <ebotcazou@adacore.com>

        PR rtl-optimization/54369
        * config/mips/mips.c (mips_reorg): Invoke cleanup_barriers before
        calling dbr_schedule.
        * config/sparc/sparc.c (sparc_reorg): Likewise.

2012-09-01  Jakub Jelinek  <jakub@redhat.com>

        PR target/54436
        * config/i386/i386.md (*mov<mode>_insv_1_rex64, *movsi_insv_1): If
        operands[1] is CONST_INT_P, convert it to QImode before printing.

2012-09-01  Andrew Pinski  <apinski@cavium.com>

        * simplify-rtx.c (simplify_unary_operation_1 <case TRUNCATE>):
        A truncate of a memory is just loading the low part of the memory.

2012-09-01  Uros Bizjak  <ubizjak@gmail.com>

        PR target/46829
        PR target/46843
        * config/i386/i386.c (ix86_legitimate_combined_insn): New function.
        (TARGET_LEGITIMATE_COMBINED_INSN): New macro.

2012-09-01  Uros Bizjak  <ubizjak@gmail.com>

        * target.def (legitimate_combined_insn): New target hook.
        * doc/tm.texi.in (TARGET_LEGITIMATE_COMBINED_INSN): New hook.
        * doc/tm.texi: Regenerated.
        * combine.c (recog_for_combine): Call targetm.legitimate_combined_insn
        to allow targets to reject combined insn.
        * hooks.h (hook_bool_rtx_true): New.
        * hooks.c (hook_bool_rtx_true): Ditto.

2012-08-31  Martin Jambor  <mjambor@suse.cz>

        * ipa-inline-analysis.c (estimate_function_body_sizes): Allocate
        nonconstant_names after calculate_dominance_info and
        loop_optimizer_init.

2012-08-31  Greta Yorsh  <Greta.Yorsh@arm.com>

        * config/arm/arm.c (arm_expand_epilogue): Remove unused variable
        floats_from_frame.

2012-08-31  Martin Jambor  <mjambor@suse.cz>

        PR middle-end/54409
        * ipa-inline-analysis.c (remap_predicate): Fix the offset_map
        checking condition.

2012-08-31  Martin Jambor  <mjambor@suse.cz>

        * ipa-inline-analysis.c (phi_result_unknown_predicate): New function.
        (predicate_for_phi_result): Likewise.
        (estimate_function_body_sizes): Use the above two functions.

2012-08-31  Martin Jambor  <mjambor@suse.cz>

        PR middle-end/54394
        * ipa-inline-analysis.c (estimate_function_body_sizes): Compute
        dominance info and loops whenever optimizing.

2012-08-29  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>
            Richard Earnshaw  <richard.earnshaw@arm.com>

        PR target/54252
        * config/arm/arm.c (neon_dereference_pointer): Adjust nelems by
        element size. Use elem_type from the formal parameter. New parameter
        fcode.
        (neon_expand_args): Adjust call to neon_dereference_pointer.

2012-08-29  Steven Bosscher  <steven@gcc.gnu.org>

        * cfg.c (dump_bb_info): Print a newline if there were no edges to dump.

2012-08-29  Chung-Lin Tang  <cltang@codesourcery.com>

        Revert:
        * config/mips/t-linux64 (MULTILIB_OSDIRNAMES): Change to use
        mapping style, add ../lib/mips16.
        (MULTILIB_OPTIONS,MULTILIB_DIRNAMES): Add mips16.
        (MULTILIB_EXCLUSIONS): Exclude mips16 when not -mabi=32.

2012-08-29  Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/mips.h (TARGET_CPU_CPP_BUILTINS): Define __mips_synci
        if TARGET_SYNCI.

2012-08-29  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.opt (menable-tas): Rename to mtas.
        * doc/invoke.texi (SH options): Likewise.
        * config/sh/sync.md: Update comments.

2012-08-29  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/iterators.md: New file.
        * config/sh/sync.md (I124, I12, i124suffix): Delete.  Replace usage
        with new iterators QIHISI, QIHI, bw, bwl respectively throughout
        the file.
        * config/sh/sh.md: Include new file iterators.md.
        (zero_extendhisi2, zero_extendqisi2): Fold into zero_extend<mode>si2.
        (*zero_extendhisi2_compact, *zero_extendqisi2_compact): Fold into
        *zero_extend<mode>si2_compact.
        (*zero_extendqisi2_disp_mem, zero_extendhisi2_disp_mem): Fold into
        *zero_extend<mode>si2_disp_mem.
        (extendhisi2, extendqisi2): Fold into extend<mode>si2.
        (*extendqisi2_compact_reg, *extendhisi2_compact_reg): Fold into
        *extend<mode>si2_compact_reg.
        (*extendqisi2_compact_mem_disp, *extendhisi2_compact_mem_disp): Fold
        into *extend<mode>si2_compact_mem_disp.
        (*extendqisi2_compact_snd, *extendhisi2_compact_snd): Fold into
        *extend<mode>si2_compact_snd.
        (*movsi_index_disp, *movhi_index_disp): Fold with iterators and rename
        to *movsi_index_disp_load, *movhi_index_disp_load,
        *mov<mode>_index_disp_store.
        (*movqi_reg_reg, *movhi_reg_reg): Fold into *mov<mode>_reg_reg.
        (*movqi_store_mem_disp04, *movhi_store_mem_disp05): Fold into
        *mov<mode>_store_mem_disp04.
        (*movqi_store_mem_disp12, *movhi_store_mem_disp13): Fold into
        *mov<mode>_store_mem_disp12.
        (*movqi_load_mem_disp, *movhi_load_mem_disp): Fold into
        *mov<mode>_load_mem_disp04 and *mov<mode>_load_mem_disp12.

2012-08-29  Martin Jambor  <mjambor@suse.cz>

        * ipa-inline.h (estimate_edge_hints): Call do_estimate_edge_hints, not
        do_estimate_edge_time.

2012-08-29  Chung-Lin Tang  <cltang@codesourcery.com>

        * config/mips/mips.h (CRT_CALL_STATIC_FUNCTION): Add nomips16 asm
        directives, remove #ifndef __mips16 guards.
        * config/mips/t-linux64 (MULTILIB_OSDIRNAMES): Change to use
        mapping style, add ../lib/mips16.
        (MULTILIB_OPTIONS,MULTILIB_DIRNAMES): Add mips16.
        (MULTILIB_EXCLUSIONS): Exclude mips16 when not -mabi=32.

2012-08-28  Walter Lee  <walt@tilera.com>
        * confg/tilegx/tilegx.md: Fix code style.
        (*zero_extendsidi_truncdisi): Fix typo.
        * config/tilegx/tilegx.c: Fix code style.
        (tilegx_function_profiler): Fix typo.

2012-08-28  Walter Lee  <walt@tilera.com>

        * doc/invoke.texi: Document -mcmodel=small, -mcmodel=large.
        * config/tilegx/tilegx.h: Include config/tilegx/tilegx-opts.h.
        (CRT_CALL_STATIC_FUNCTION): Define.
        * config/tilegx/predicates.md (const_last_symbolic_operand):
        Handle UNSPEC_HW2_LAST_PCREL, UNSPEC_HW1_LAST_PLT_PCREL, and
        UNSPEC_HW2_LAST_PLT_PCREL.
        (const_symbolic_operand): Handle UNSPEC_HW1_PCREL,
        UNSPEC_HW0_PLT_PCREL, and UNSPEC_HW1_PLT_PCREL.
        * config/tilegx/tilegx.md (UNSPEC_MOV_LARGE_PCREL_STEP4): Define,
        and renumber the constants that follow.
        (UNSPEC_HW1_PCREL): Ditto.
        (UNSPEC_HW2_LAST_PCREL): Ditto.
        (UNSPEC_HW0_PLT_PCREL): Define.
        (UNSPEC_HW1_PLT_PCREL): Define.
        (UNSPEC_HW1_LAST_PLT_PCREL): Define.
        (UNSPEC_HW2_LAST_PLT_PCREL): Define.
        (mov_large_pcrel_step1): Define.
        (mov_large_pcrel_step2): Define.
        (mov_large_pcrel_step3): Define.
        (mov_large_pcrel_step4): Define.
        (mov_plt_pcrel_step1): Define.
        (mov_plt_pcrel_step2): Define.
        (mov_plt_pcrel_step3): Define.
        (mov_plt_pcrel_step1_32bit): Define.
        (mov_plt_pcrel_step2_32bit): Define.
        (call): Handle tilegx_cmodel == CM_LARGE, CM_LARGE_PIC.
        (call_value): Ditto.
        * config/tilegx/tilegx.opt: Include config/tilegx/tilegx-opts.h.
        (mcmodel): New option.
        (enum cmodel): Define.
        (CM_SMALL): Define.
        (CM_LARGE): Define.
        * config/tilegx/tilegx-opts.h: New file.
        * config/tilegx/tilegx-protos.h (tilegx_compute_pcrel_address):
        Declare.
        (tilegx_compute_pcrel_plt_address): Declare.
        * config/tilegx/tilegx.c (tilegx_option_override): Handle
        tilegx_cmodel.
        (tilegx_function_ok_for_sibcall): Ditto.
        (compute_pcrel_address): Rename to tilegx_compute_pcrel_address,
        and don't declare static.  Handle tilegx_cmodel.
        (tilegx_compute_pcrel_plt_address): Define.
        (tilegx_legitimize_pic_address): Rename calls to
        compute_pcrel_address.
        (tilegx_delegitimize_address): Handle UNSPEC_HW1_PCREL,
        UNSPEC_HW2_LAST_PCREL, UNSPEC_HW0_PLT_PCREL, UNSPEC_HW1_PLT_PCREL,
        UNSPEC_HW1_LAST_PLT_PCREL, UNSPEC_HW2_LAST_PLT_PCREL.
        (load_pic_register): Rename call to compute_pcrel_address.
        (tilegx_print_operand): Handle UNSPEC_HW1_PCREL,
        UNSPEC_HW2_LAST_PCREL, UNSPEC_HW0_PLT_PCREL, UNSPEC_HW1_PLT_PCREL,
        UNSPEC_HW1_LAST_PLT_PCREL, UNSPEC_HW2_LAST_PLT_PCREL.

2012-08-27  Maxim Kuvyrkov  <maxim@codesourcery.com>

        * sched-deps.c (add_dependence_list_and_free): Simplify.
        (flush_pending_list_and_free): Fix a hack that was fixing a hack.  Free
        lists when add_dependence_list_and_free doesn't free them.

2012-08-27  Uros Bizjak  <ubizjak@gmail.com>

        PR target/46254
        * config/i386/predicates.md (cmpxchg8b_pic_memory_operand): Return
        true for TARGET_64BIT or !flag_pic.
        * config/i386/sync.md (*atomic_compare_and_swap_doubledi_pic): Remove.
        (atomic_compare_and_swap_double<mode>): Change operand 2 predicate
        to cmpxchg8b_pic_memory_operand.  Use DWIH mode iterator.
        Add insn constraint.  Conditionally emit xchg asm insns.
        (atomic_compare_and_swap<mode>): Update calls.  Check only
        cmpxchg8b_pic_memory_operand in memory address fixup.
        (DCASMODE): Remove.
        (CASHMODE): Rename from DCASHMODE.
        (doublemodesuffix): Update modes.
        (regprefix): New mode attribute.

        (unspecv) <UNSPECV_CMPXCHG_{1,2,3,4}>: Remove.
        <UNSPECV_CMPXCHG>: New constant.
        (atomic_compare_and_swap<mode>_1): Rename from
        atomic_compare_and_swap_single<mode>.  Update calls and
        unspec_volatile constants.
        (atomic_compare_and_swap<mode>_doubleword): Rename from
        atomic_compare_and_swap_double<mode>.  Update calls and
        unspec_volatile constants.

2012-08-27  Walter Lee  <walt@tilera.com>

        * doc/md.texi (TILE-Gx): Fix typo.

2012-08-27  Walter Lee  <walt@tilera.com>

        * config/tilegx/tilegx.c (tilegx_function_profiler): Fix typo.
        * config/tilepro/tilepro.c (tilepro_function_profiler): Ditto.

2012-08-27  Walter Lee  <walt@tilera.com>

        * config/tilegx/tilegx.md (*bfins): Rename to insn_bfins.
        (insn_bfins): Delete.

2012-08-27  Walter Lee  <walt@tilera.com>

        * config/tilegx/sync.md (atomic_compare_and_swap_bare<mode>,
        atomic_exchange_bare<mode>,
        atomic_fetch_<fetchop_name>_bare<mode>): Set type to X1_remote.
        * config/tilegx/tilegx-generic.md (X1_remote): New
        insn_reservation.
        * config/tilegx/tilegx.md (type): Add X1_remove.
        (insn_cmpexch<four_if_si>, insn_exch<four_if_si>,
        insn_fetchadd<four_if_si>, insn_fetchaddgez<four_if_si>,
        insn_fetchand<four_if_si>, insn_fetchor<four_if_si>): Set type to
        X1_remote.

2012-08-27  Andreas Schwab  <schwab@linux-m68k.org>

        * gdbinit.in: Fix syntax of skip command.

2012-08-27  Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/mips.c (mips_pic_call_symbol_from_set): Check for
        SYMBOL_REF SET_SRCs.

2012-08-27  Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/mips.c (vr4130_align_insns): Don't simulate
        ghost instructions.  Assert that the required instructions exist.

2012-08-26  Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/mips.h (AVOID_CCMODE_COPIES): Update rationale for
        definition.
        * config/mips/mips.c (machine_function): Add next_fcc.
        (mips_output_move): Remove handling of fcc moves.
        (mips_allocate_fcc): New function.
        (mips_emit_compare, mips_expand_vcondv2sf): Use it.
        (mips_hard_regno_mode_ok_p): Restrict CCmode to ST registers.
        Remove special case for CCmode reloads.
        (mips_expand_builtin_compare_1): Use mips_allocate_fcc and treat
        the result a fixed operand.
        * config/mips/mips.md (move_type): Remove lui_movf.
        (type, length): Remove references to it.
        (movcc, reload_incc, reload_outcc): Delete.

2012-08-26  Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/mips.c (mips_has_long_branch_p): New function,
        split out from...
        (mips_expand_ghost_gp_insns): ...here.  Look inside sequences.

2012-08-26  Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/mips.c (r10k_safe_mem_expr_p): Use get_inner_reference.

2012-08-26  Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/mips.c (mips_rtx_costs): Add costs for CINS.

2012-08-26  Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/mips.c (mips_rtx_costs): Add missing COSTS_N_INSNS
        to the size cost of multiplication.

2012-08-26  Gerald Pfeifer  <gerald@pfeifer.com>

        * doc/install.texi (Specific): Clarify what needs to be added to
        this section.

2012-08-26  Gerald Pfeifer  <gerald@pfeifer.com>

        * doc/tm.texi.in (Misc): Move descriptions of NO_DOLLAR_IN_LABEL
        and NO_DOT_IN_LABEL from here...
        (Label Output): ...to here.
        * doc/tm.texi: Regenerate.

2012-08-26  Gerald Pfeifer  <gerald@pfeifer.com>

        * doc/invoke.texi (C++ Dialect Options): Add missing space.

2012-08-25  Eric Botcazou  <ebotcazou@adacore.com>

        PR rtl-optimization/54088
        * jump.c (delete_related_insns): Robustify latest change.

2012-08-25  Ricardo Catalinas Jiménez  <jimenezrick@gmail.com>

        * doc/extend.texi (__atomic Builtins): Remove space before comma.

2012-08-25  Richard Sandiford  <rdsandiford@googlemail.com>
            Andrew Pinski  <apinski@cavium.com>

        * config/mips/mips.h (CASE_VECTOR_MODE): For not
        TARGET_MIPS16_SHORT_JUMP_TABLES use ptr_mode.
        (CASE_VECTOR_SHORTEN_MODE): Likewise.

2012-08-25  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.h (FP_REG_P): Remove macro.
        (FP_REGNO_P): Ditto.
        (HARD_REGNO_NREGS): Use STACK_REGNO_P instead of FP_REGNO_P.
        (HARD_REGNO_NREGS_HAS_PADDING): Ditto.
        (ANY_FP_REGNO_P): Ditto.
        (HARD_REGNO_RENAME_OK): Use STACK_REGNO_P.
        * config/i386/i386.c (output_387_ffreep): Use STACK_REGNO_P
        instead of FP_REGNO_P.
        (ix86_hard_regno_mode_ok): Ditto.
        * config/i386/predicates.md (fp_register_operand): Ditto.
        (register_and_not_fp_reg_operand): Ditto.
        * config/i386/sync.md (atomic_loaddi_fpu): Use STACK_REG_P instead
        of FP_REG_P.

        * reg-stack.c (get_true_reg): Use STACK_REG_P instead of FP_REG_P.

2012-08-24  Jason Merrill  <jason@redhat.com>

        * print-tree.c (print_node): Don't check TREE_LANG_FLAG_*
        on TREE_VEC or SSA_NAME.

2012-08-24  Jakub Jelinek  <jakub@redhat.com>

        PR c/54363
        * gimplify.c (optimize_compound_literals_in_ctor): Only recurse
        if init is a CONSTRUCTOR.

2012-08-24  Steven Bosscher  <steven@gcc.gnu.org>

        * tree-ssa-live.c (dump_var_map): Do not dump the partition
        map of virtual operands.

2012-08-24  Yuri Rumyantsev  <ysrumyan@gmail.com>

        * config/i386/i386.c (ia32_multipass_dfa_lookahead) : Add
        case for Atom processor.

2012-08-24  Simon Baldwin  <simonb@google.com>

        * dwarf2out.c (gen_producer_string): Omit command line switch if
        CL_NO_DWARF_RECORD flag set.
        * opts.h (CL_NO_DWARF_RECORD): New.
        * opt-functions.awk (switch_flags): Add NoDWARFRecord.
        * doc/options.texi: Document NoDWARFRecord option flag.

2012-08-24  H.J. Lu  <hongjiu.lu@intel.com>

        PR debug/52857
        * dwarf2out.c (mem_loc_descriptor): Allow arg_pointer_rtx and
        frame_pointer_rtx for based_loc_descr.

2012-08-24  Martin Jambor  <mjambor@suse.cz>

        * predict.c (maybe_hot_frequency_p): New parameter fun.  Use its decl
        instead of current_function_decl, use profile_status_for_function and
        ENTRY_BLOCK_PTR_FOR_FUNCTION with fun instead of their cfun variants.
        (maybe_hot_count_p): New parameter fun, use
        profile_status_for_function instead of its cfun_variant.
        (maybe_hot_bb_p): New parameter fun, checking-assert it, pass it to
        all callees.
        (maybe_hot_edge_p): Pass cfun to maybe_hot_count_p and
        maybe_hot_frequency_p.
        (probably_never_executed_bb_p): New parameter fun, use its decl
        instead of current_function_decl.
        (optimize_bb_for_size_p): Pass cfun to maybe_hot_bb_p.
        (rtl_profile_for_bb): Likewise.
        (compute_function_frequency): Pass cfun to maybe_hot_bb_p and
        probably_never_executed_bb_p.
        * tree-ssa-operands.c (ssa_operands_active): New operator fun.  Use it
        instead of cfun.
        (update_stmt_operands): Pass cfun as an argument of
        ssa_operands_active.
        (swap_tree_operands): Likewise.
        * gimple-iterator.c (update_modified_stmt): Likewise.
        (update_modified_stmts): Likewise.
        * tree-flow-inline.h (delink_stmt_imm_use): Likewise.
        * tree-ssa.c (delete_tree_ssa): Likewise.
        * bb-reorder.c (bb_to_key): Pass cfun to probably_never_executed_bb_p.
        (push_to_next_round_p): Likewise.
        (find_rarely_executed_basic_blocks_and_crossing_edges ): Likewise.
        * cfg.c: Inlude tree.h.
        (check_bb_profile): Use profile_status_for_function,
        EXIT_BLOCK_PTR_FOR_FUNCTION and ENTRY_BLOCK_PTR_FOR_FUNCTION with
        DECL_STRUCT_FUNCTION (current_function_decl) instead of their cfun
        variants.
        (dump_bb_info): Pass DECL_STRUCT_FUNCTION (current_function_decl) to
        maybe_hot_bb_p and probably_never_executed_bb_p.
        * gimple-pretty-print.c (gimple_dump_bb_buff): Checking-assert that
        DECL_STRUCT_FUNCTION (current_function_decl) is not NULL.  Pass it to
        dump_histograms_for_stmt.
        (dump_gimple_mem_ops): Pass
        DECL_STRUCT_FUNCTION (current_function_decl)
        as an argument to dump_gimple_mem_ops.
        * tree-cfg.c (dump_function_to_file): Rename parameter fn to fndecl.
        Do not change cfun.  Change and restore current_function_decl.
        * Makefile.in (cfg.o): Include TREE_H in dependencies.

2012-08-24  Georg-Johann Lay  <avr@gjlay.de>

        PR target/54222
        * avr-modes.def (HA, SA, DA, TA, UTA): Adjust modes.
        * avr/avr-fixed.md: New file.
        * avr/avr.md: Include it.
        (cc): Add: minus.
        (adjust_len): Add: minus, minus64, ufract, sfract.
        (ALL1, ALL2, ALL4, ORDERED234): New mode iterators.
        (MOVMODE): Add: QQ, UQQ, HQ, UHQ, HA, UHA, SQ, USQ, SA, USA.
        (MPUSH): Add: HQ, UHQ, HA, UHA, SQ, USQ, SA, USA.
        (pushqi1, xload8_A, xload_8, movqi_insn, *reload_inqi, addqi3,
        subqi3, ashlqi3, *ashlqi3, ashrqi3, lshrqi3, *lshrqi3, *cmpqi,
        cbranchqi4, *cpse.eq): Generalize to handle all 8-bit modes in ALL1.
        (*movhi, reload_inhi, addhi3, *addhi3, addhi3_clobber, subhi3,
        ashlhi3, *ashlhi3_const, ashrhi3, *ashirhi3_const, lshrhi3,
        *lshrhi3_const, *cmphi, cbranchhi4): Generalize to handle all
        16-bit modes in ALL2.
        (subhi3, casesi, strlenhi): Add clobber when expanding minus:HI.
        (*movsi, *reload_insi, addsi3, subsi3, ashlsi3, *ashlsi3_const,
        ashrsi3, *ashrhi3_const, *ashrsi3_const, lshrsi3, *lshrsi3_const,
        *reversed_tstsi, *cmpsi, cbranchsi4): Generalize to handle all
        32-bit modes in ALL4.
        * avr-dimode.md (ALL8): New mode iterator.
        (adddi3, adddi3_insn, adddi3_const_insn, subdi3, subdi3_insn,
        subdi3_const_insn, cbranchdi4, compare_di2,
        compare_const_di2, ashrdi3, lshrdi3, rotldi3, ashldi3_insn,
        ashrdi3_insn, lshrdi3_insn, rotldi3_insn): Generalize to handle
        all 64-bit modes in ALL8.
        * config/avr/avr-protos.h (avr_to_int_mode): New prototype.
        (avr_out_fract, avr_out_minus, avr_out_minus64): New prototypes.
        * config/avr/avr.c (TARGET_FIXED_POINT_SUPPORTED_P): Define to...
        (avr_fixed_point_supported_p): ...this new static function.
        (TARGET_BUILD_BUILTIN_VA_LIST): Define to...
        (avr_build_builtin_va_list): ...this new static function.
        (avr_adjust_type_node): New static function.
        (avr_scalar_mode_supported_p): Allow if ALL_FIXED_POINT_MODE_P.
        (avr_builtin_setjmp_frame_value): Use gen_subhi3 and return new
        pseudo instead of gen_rtx_MINUS.
        (avr_print_operand, avr_operand_rtx_cost): Handle: CONST_FIXED.
        (notice_update_cc): Handle: CC_MINUS.
        (output_movqi): Generalize to handle respective fixed-point modes.
        (output_movhi, output_movsisf, avr_2word_insn_p): Ditto.
        (avr_out_compare, avr_out_plus_1): Also handle fixed-point modes.
        (avr_assemble_integer): Ditto.
        (output_reload_in_const, output_reload_insisf): Ditto.
        (avr_compare_pattern): Skip all modes > 4 bytes.
        (avr_2word_insn_p): Skip movuqq_insn, movqq_insn.
        (avr_out_fract, avr_out_minus, avr_out_minus64): New functions.
        (avr_to_int_mode): New function.
        (adjust_insn_length): Handle: ADJUST_LEN_SFRACT,
        ADJUST_LEN_UFRACT, ADJUST_LEN_MINUS, ADJUST_LEN_MINUS64.
        * config/avr/predicates.md (const0_operand): Allow const_fixed.
        (const_operand, const_or_immediate_operand): New.
        (nonmemory_or_const_operand): New.
        * config/avr/constraints.md (Ynn, Y00, Y01, Y02, Ym1, Ym2, YIJ):
        New constraints.
        * config/avr/avr.h (LONG_LONG_ACCUM_TYPE_SIZE): Define.

2012-08-23  Kenneth Zadeck <zadeck@naturalbridge.com>

        * alias.c (rtx_equal_for_memref_p): Convert constant cases.
        * combine.c (find_single_use_1, mark_used_regs_combine): Convert
        to CASE_CONST_ANY.
        * cse.c (exp_equiv_p, canon_reg, fold_rtx, cse_process_notes_1,
        count_reg_usage): Convert constant cases.
        * cselib.c (cselib_expand_value_rtx_1): Convert to CASE_CONST_ANY.
        (cselib_subst_to_values): Convert constant cases.
        * df-scan.c (df_uses_record): Ditto.
        * dse.c (const_or_frame_p): Convert case statements to explicit
        if-then-else using mode classes.
        * emit-rtl.c (verify_rtx_sharing, copy_insn_1): Convert constant cases.
        * explow.c (convert_memory_address_addr_space): Ditto.
        * gcse.c (want_to_gcse_p, oprs_unchanged_p, compute_transp): Ditto.
        * genattrtab.c (attr_copy_rtx, clear_struct_flag): Ditto.
        * ira.c (equiv_init_varies_p, contains_replace_regs,
        memref_referenced_p, rtx_moveable_p): Ditto.
        * jump.c (mark_jump_label_1): Remove constant cases.
        (rtx_renumbered_equal_p): Convert to CASE_CONST_UNIQUE.
        * loop-invariant.c (check_maybe_invariant, hash_invariant_expr_1,
        invariant_expr_equal_p): Convert to CASE_CONST_ANY.
        * postreload-gcse.c (oprs_unchanged_p): Convert constant cases.
        * reginfo.c (reg_scan_mark_refs): Ditto.
        * regrename.c (scan_rtx): Ditto.
        * reload1.c (eliminate_regs_1, elimination_effects,
        scan_paradoxical_subregs): Ditto.
        * reload.c (operands_match_p, subst_reg_equivs):  Ditto.
        * resource.c (mark_referenced_resources, mark_set_resources): Ditto.
        * rtlanal.c (rtx_unstable_p, rtx_varies_p, count_occurrences)
        (reg_mentioned_p, modified_between_p, modified_in_p)
        (volatile_insn_p, volatile_refs_p, side_effects_p, may_trap_p_1,
        inequality_comparisons_p, computed_jump_p_1): Ditto.
        * rtl.c (copy_rtx, rtx_equal_p_cb, rtx_equal_p): Ditto.
        * sched-deps.c (sched_analyze_2): Ditto.
        * valtrack.c (cleanup_auto_inc_dec): Ditto.
        * rtl.h: (CASE_CONST_SCALAR_INT, CASE_CONST_UNIQUE,
        CASE_CONST_ANY): New macros.

2012-08-23  Julian Brown  <julian@codesourcery.com>
            Sandra Loosemore  <sandra@codesourcery.com>

        * config/mips/mips.md
        (UNSPEC_CASESI_DISPATCH): New.
        (MIPS16_T_REGNUM): New constant.
        (tablejump): Don't use for MIPS16_SHORT_JUMP_TABLES.
        (casesi): New.
        (casesi_internal_mips16_<mode>): New.
        * config/mips/mips.c (mips16_split_long_branches): Adjust test
        to ignore casesi jump tables.
        * config/mips/mips.h (TARGET_MIPS16_SHORT_JUMP_TABLES): Update
        comment.
        (CASE_VECTOR_MODE): Use SImode unconditionally.
        (CASE_VECTOR_SHORTEN_MODE): Define.
        (ASM_OUTPUT_ADDR_DIFF_ELT): Output word-sized addr_diff_elts
        when necessary for MIPS16_SHORT_JUMP_TABLES.

2012-08-23  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

        * config/rs6000/rs6000.c (rs6000_density_test): Free loop body.

2012-08-23  H.J. Lu  <hongjiu.lu@intel.com>

        PR driver/54335
        * doc/invoke.texi: Add -da and remove -dm.

2012-08-23  Richard Guenther  <rguenther@suse.de>

        * tree-vect-stmts.c (vect_finish_stmt_generation): Update
        virtual SSA form.

2012-08-23  Jakub Jelinek  <jakub@redhat.com>

        * tree.c (copy_node_stat): Clear DECL_STRUCT_FUNCTION.

2012-08-23  Mingjie Xing  <mingjie.xing@gmail.com>

        * doc/gty.texi: Fix typo.

2012-08-23  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-loop-manip.c (add_exit_phis_var): Allow virtual operands.
        (find_uses_to_rename_use): Likewise.
        (find_uses_to_rename_bb): Likewise.
        (find_uses_to_rename_stmt): Walk over all operands.

2012-08-22  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54089
        * config/sh/predicates (p27_rshift_count_operand,
        not_p27_rshift_count_operand): New predicates.
        * config/sh/sh.c (sh_ashlsi_clobbers_t_reg_p,
        sh_lshrsi_clobbers_t_reg_p, sh_dynamicalize_shift_p): Handle special
        case when shift amount is 31.
        (gen_ashift): Emit gen_shlr instead of gen_lshrsi3_m.
        * config/sh/sh.md (ashlsi3_d): Set type to 'dyn_shift' instead
        of 'arith'.
        (ashlsi_c): Rename to shll.  Adapt calls to gen_ashlsi_c throughout
        the file.
        (lshrsi3): Remove clobber from expander.  Use shift_count_operand
        instead of nonmemory_operand predicate for second operand.  Add
        handling of case lshrsi3_n_clobbers_t.
        (lshrsi3_k): Use p27_rshift_count_operand for second operand.
        (lshrsi3_d): Make insn_and_split.  Split dynamic shift to constant
        shift sequences if beneficial.
        (lshrsi3_n): Make insn_and_split.  Split constant shift sequence to
        dynamic shift if beneficial.
        (lshrsi3_n_clobbers_t): New insn_and_split.
        (lshrsi3_m): Delete.

2012-08-22  Steven Bosscher  <steven@gcc.gnu.org>

        * tracer.c (mark_bb_seen): Use SBITMAP_SIZE.

        * alias.c (MAX_ALIAS_LOOP_PASSES): Update comment with rationale,
        or rather a lack thereof.
        (init_alias_analysis): Propagate the latest information across
        the CFG in topological order to propagate as far as possible in
        each iteration.  Ignore debug insns.

2012-08-22  H.J. Lu  <hongjiu.lu@intel.com>

        * doc/invoke.texi: Document -mlong-double-64/-mlong-double-80.

        * config/i386/i386.c (flag_opts): Add -mlong-double-64.
        (TARGET_HAS_BIONIC): Default long double to 64-bit for Bionic.

        * config/i386/i386.h (LONG_DOUBLE_TYPE_SIZE): Use 64 if
        TARGET_LONG_DOUBLE_64 is true.
        (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): New macro.
        (WIDEST_HARDWARE_FP_SIZE): Defined to 80.

        * config/i386/i386.opt (mlong-double-80): New option.
        (mlong-double-64): Likewise.

        * config/i386/i386-c.c (ix86_target_macros): Define
        __LONG_DOUBLE_64__ for TARGET_LONG_DOUBLE_64.

2012-08-22  H.J. Lu  <hongjiu.lu@intel.com>

        PR target/54347
        * config/i386/i386.c (ix86_split_to_parts): Replace
        REAL_VALUE_TO_TARGET_LONG_DOUBLE with real_to_target.

2012-08-22  Richard Guenther  <rguenther@suse.de>

        * tree-vectorizer.c (vectorize_loops): Do not call
        mark_virtual_operands_for_renaming.
        * tree-vect-slp.c (vect_slp_transform_bb): Likewise.
        Do not update SSA form here.

2012-08-22  Dodji Seketeli  <dodji@redhat.com>

        * tree.h (TREE_NOTHROW): Use the base.nothrow_flag.

2012-08-22  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/46590
        * tree-ssa-alias.h (get_continuation_for_phi): Add alias query
        counter output argument.
        (walk_non_aliased_vuses): Add alias query counter argument
        to the walker callback.
        * tree-ssa-alias.c (maybe_skip_until): Add alias query counter
        output argument and count alias queries.
        (get_continuation_for_phi_1): Likewise.
        (get_continuation_for_phi): Likewise.
        (walk_non_aliased_vuses): Add alias query counter argument
        to the walker callback and allow it to abort the walk by
        returning -1.
        * tree-ssa-pre.c (translate_vuse_through_block): Adjust.
        * tree-ssa-sccvn.c (vn_reference_lookup_2): Add alias query
        counter parmeter, abort walk if that is bigger than
        --param sccvn-max-alias-queries-per-access.
        * params.def (sccvn-max-alias-queries-per-access): New param.
        * doc/invoke.texi (sccvn-max-alias-queries-per-access): Document.

2012-08-22  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-loop-ch.c (copy_loop_headers): Remove redundant checking.
        * tree-into-ssa.c (initialize_flags_in_bb): Use gcc_checking_assert
        instead of gcc_assert.
        (mark_block_for_update): Likewise.
        (add_new_name_mapping): Likewise.
        (mark_def_sites): Likewise.
        (insert_phi_nodes_for): Likewise.
        (rewrite_debug_stmt_uses): Likewise.
        (rewrite_stmt): Likewise.
        (maybe_register_def): Likewise.
        (rewrite_update_phi_arguments): Likewise.
        (rewrite_update_enter_block): Likewise.
        (mark_def_interesting): Likewise.
        (prepare_def_site_for): Likewise.
        (insert_updated_phi_nodes_for): Likewise.

2012-08-22  Jakub Jelinek  <jakub@redhat.com>

        * tree-vect-loop.c (vect_transform_loop): Initialize
        check_profitability to false.

        * tree-predcom.c (try_combine_chains): Free the worklist vector
        at the end.

2012-08-22  Marc Glisse  <marc.glisse@inria.fr>

        PR tree-optimization/54317
        * tree-vrp.c (extract_range_from_binary_expr_1): Test for
        double_int overflow.
        Remove dead tests.

2012-08-22  Jakub Jelinek  <jakub@redhat.com>

        * tree-vrp.c (find_assert_locations): Skip also edges
        from the entry block.

        * tree-vect-loop-manip.c (slpeel_make_loop_iterate_ntimes): Call
        free_stmt_vec_info on orig_cond after gsi_removing it.
        * tree-vect-data-refs.c (vect_enhance_data_refs_alignment): Always
        free body_cost_vec vector.
        (vect_analyze_data_refs): If gather is unsuccessful,
        free_data_ref (dr).
        * tree-inline.c (tree_function_versioning): Free
        old_transforms_to_apply vector.

2012-08-22  Steven Bosscher  <steven@gcc.gnu.org>

        * tree-ssa-coalesce.c (struct ssa_conflicts_d): Make contents
        of this a VEC and add a bitmap obstack.
        (ssa_conflicts_new): Allocate the obstack and grow the VEC cleared
        to the right size.
        (ssa_conflicts_delete): Free the VEC and release the obstack.
        (ssa_conflicts_test_p, ssa_conflicts_test_p, ssa_conflicts_add_one,
        ssa_conflicts_merge, ssa_conflicts_dump): Update for above changes.
        (truct live_track_d): Add another bitmap obstack here.
        (new_live_track): Initialize it and use it for all bitmaps.
        (delete_live_track): Don't free the bitmaps one at a time, just
        release the obstack.
        (create_outofssa_var_map): Fix to conform to GCC code style rules.

2012-08-21  Nathan Froyd  <froydnj@gcc.gnu.org>

        * config/m32c/constraints.md: New file.
        * config/m32c/t-m32c (MD_FILES): Add constraints.
        * config/m32c/m32c-protos.h (m32c_const_ok_for_constraint_p): Delete.
        (m32c_extra_address_constraint, m32c_extra_memory_constraint): Delete.
        (m32c_reg_class_from_constraint): Delete.
        (m32c_extra_constraint_p, m32c_extra_constraint_p2): Delete.
        (m32c_matches_constraint_p): Declare.
        * config/m32c/m32c.h (CONSTRAINT_LEN): Delete.
        (REG_CLASS_FROM_CONSTRAINT): Delete.
        (CONST_OK_FOR_CONSTRAINT_P): Delete.
        (CONST_DOUBLE_OK_FOR_CONSTRAINT_P): Delete.
        (EXTRA_CONSTRAINT_STR): Delete.
        (EXTRA_MEMORY_CONSTRAINT, EXTRA_ADDRESS_CONSTRAINT): Delete.
        * config/m32c/m32c.c: Include tm-constrs.h
        (m32c_reg_class_from_constraint): Delete.
        (m32c_const_ok_for_constraint_p): Delete.
        (m32c_extra_constraint_p2): Rename to...
        (m32c_matches_constraint_p): ...this.  Make it return bool.  Tweak
        formatting.
        (m32c_extra_constraint_p): Delete.
        (m32c_extra_address_constraint, m32c_extra_memory_constraint): Delete.
        (m32c_split_move): Use satisfies_constraint_Ss.
        * config/m32c/predicates.md (memsym_operand): Use
        satisfies_constraint_Si.
        (memimmed_operand): Use satisfies_constraint_Sp.
        (m32c_psi_scale, m32c_1bit8_operand): Use satisfies_constraint_Ilb.
        (m32c_1bit16_operand): Use satisfies_constraint_Ilw.
        (m32c_1mask8_operand): Use satisfies_constraint_ImB.
        (m32c_1mask16_operand): Use satisfies_constraint_Imw.

2012-08-21  Nathan Froyd  <froydnj@gcc.gnu.org>

        * config/mep/mep.h (REG_CLASS_FROM_CONSTRAINT): Delete.
        (CONST_OK_FOR_LETTER_P, CONST_DOUBLE_OK_FOR_LETTER_P): Delete.
        (CONSTRAINT_LEN, EXTRA_CONSTRAINT): Delete.
        * config/mep/mep.c (mep_reg_class_from_constraint): Delete.
        (mep_const_ok_for_letter_p, mep_extra_constraint): Delete.
        * config/mep/mep-protos.h (mep_reg_class_from_constraint): Delete.
        (mep_const_ok_for_letter_p, mep_extra_constraint): Delete.

2012-08-21  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.md (cmpeqdi_t, cmpgtdi_t, cmpgedi_t, cmpgeudi_t,
        cmpgtudi_t, *movsicc_t_false, *movsicc_t_true, divsi_inv20, negsi_cond,
        truncdihi2, ic_invalidate_line_i, ic_invalidate_line_sh4a,
        ic_invalidate_line_media, movdf_i4, calli_pcrel, call_valuei,
        call_valuei_pcrel, sibcalli_pcrel, sibcall_compact,
        sibcall_valuei_pcrel, sibcall_value_compact, casesi_worker_1,
        casesi_worker_2, bandreg_m2a, borreg_m2a, bxorreg_m2a, sp_switch_1,
        sp_switch_2, stack_protect_set_si, stack_protect_set_si_media,
        stack_protect_set_di_media, stack_protect_test_si,
        stack_protect_test_si_media, stack_protect_test_di_media): Convert to
        multi-line asm output strings.
        (divsi_inv_qitable, divsi_inv_hitable): Use single-alternative asm
        output.
        (*andsi3_bclr, rotldi3_mextr, rotrdi3_mextr, calli,
        call_valuei_tbr_rel, movml_push_banked, movml_pop_banked, bclr_m2a,
        bclrmem_m2a, bset_m2a, bsetmem_m2a, bst_m2a, bld_m2a, bldsign_m2a,
        bld_reg, *bld_regqi, band_m2a, bor_m2a, bxor_m2a, mextr_rl, *mextr_lr):
        Use tab char instead of '\\t'.
        (iordi3): Use braced string.
        (*movsi_pop): Use tab chars instead of spaces.

2012-08-21  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/39423
        * config/sh/sh.md (*movhi_index_disp): Add support for SH2A
        movu.w insn.

2012-08-21  H.J. Lu  <hongjiu.lu@intel.com>

        PR middle-end/54332
        * df-scan.c (df_bb_verify): Restore df_free_collection_rec call
        inside the insn traversal loop.

        * vec.h (vec_reserve): Remove the stack allocation check.

2012-08-21  Marc Glisse  <marc.glisse@inria.fr>

        * fold-const.c (fold_ternary_loc): Detect identity permutations.
        Canonicalize permutations more.
        * tree-ssa-forwprop.c (is_combined_permutation_identity): New function.
        (simplify_permutation): Likewise.
        (ssa_forward_propagate_and_combine): Call it.

2012-08-21  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-loop-im.c (tree_ssa_lim_finalize): Properly free
        the affine expansion cache.
        * tree-ssa-dom.c (free_expr_hash_elt_contents): New function,
        split out from ...
        (free_expr_hash_elt): ... this one.
        (record_cond): Properly free a not needed hashtable element.
        (lookup_avail_expr): Likewise.
        * tree-into-ssa.c (init_ssa_renamer): Specify a free function
        for the var_infos hashtable.
        (update_ssa): Likewise.

2012-08-21  Richard Guenther  <rguenther@suse.de>

        * alloc-pool.c (pool_alloc): Fix valgrind annotation.
        * tree.h: Fix typo and complete flags documentation.

2012-08-21  Richard Guenther  <rguenther@suse.de>

        * tree.h (struct tree_base): Add union to make it possible to
        re-use the upper 4 bytes for tree codes that do not need as
        many flags as others.  Move visited and default_def_flag to
        common bits section in exchange for saturating_flag and
        unsigned_flag.  Add SSA name version and tree vec length
        fields here.
        (struct tree_vec): Remove length field here.
        (struct tree_ssa_name): Remove version field here.

2012-08-20  Jan Hubicka  <jh@suse.cz>

        PR fortran/48636
        * ipa-inline.c (want_inline_small_function_p): Take loop_iterations
        hint.
        (edge_badness): Likewise.
        * ipa-inline.h (inline_hints_vals): Add INLINE_HINT_loop_iterations.
        (inline_summary): Add loop_iterations.
        * ipa-inline-analysis.c: Include tree-scalar-evolution.h.
        (dump_inline_hints): Dump loop_iterations.
        (reset_inline_summary): Free loop_iterations.
        (inline_node_duplication_hook): Update loop_iterations.
        (dump_inline_summary): Dump loop_iterations.
        (will_be_nonconstant_expr_predicate): New function.
        (estimate_function_body_sizes): Analyze loops.
        (estimate_node_size_and_time): Set hint loop_iterations.
        (inline_merge_summary): Merge loop iterations.
        (inline_read_section): Stream in loop_iterations.
        (inline_write_summary): Stream out loop_iterations.

2012-08-20  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54089
        * config/sh/sh.md (rotcr, *rotcr, shar, shlr): New insns and splits.
        (ashrdi3_k, lshrdi3_k): Rewrite as insn_and_split.
        * config/sh/sh.c (sh_lshrsi_clobbers_t_reg_p): New function.
        * config/sh/sh-protos.h (sh_lshrsi_clobbers_t_reg_p): Declare it.

2012-08-20  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/51244
        * config/sh/sh.md (*cset_zero): New insns.

2012-08-20  Mark Wielaard  <mjw@redhat.com>

        * dwarf2out.h (enum dw_val_class): Add dw_val_class_high_pc.
        * dwarf2out.c (dw_val_equal_p): Handle dw_val_class_high_pc.
        (add_AT_low_high_pc): New function.
        (AT_lbl): Handle dw_val_class_high_pc.
        (print_die): Likewise.
        (attr_checksum): Likewise.
        (attr_checksum_ordered): Likewise.
        (same_dw_val_p): Likewise.
        (size_of_die): Likewise.
        (value_format): Likewise.
        (output_die): Likewise.
        (gen_subprogram_die): Use add_AT_low_high_pc.
        (add_high_low_attributes): Likewise.
        (dwarf2out_finish): Likewise.

2012-08-20  Jakub Jelinek  <jakub@redhat.com>

        PR rtl-optimization/54294
        * fwprop.c (all_uses_available_at): Ignore debug insns in between
        def_insn and target_insn when checking whether the shortcut is
        possible.

2012-08-20  Eric Botcazou  <ebotcazou@adacore.com>

        * config/sparc/sparc.h (MAX_FIXED_MODE_SIZE): Define.

2012-08-20  Patrick Marlier  <patrick.marlier@gmail.com>

        PR middle-end/53992
        * omp-low.c (lower_omp_1): Handle GIMPLE_TRANSACTION.

2012-08-20  Richard Earnshaw  <rearnsha@arm.com>

        PR tree-ssa/54295
        * tree-ssa-math-opts.c (is_widening_mult_rhs_p): Delete rhs_code
        declaration and setter.

2012-08-20  Richard Earnshaw  <rearnsha@arm.com>

        PR tree-ssa/54295
        * tree-ssa-math-opts.c (widening_mult_conversion_strippable_p):
        New function.
        (is_widening_mult_rhs_p): Use it.

2012-08-20  Joseph Myers  <joseph@codesourcery.com>

        * configure.ac (ffs): Check for declaration.
        * configure, config.in: Regenerate.

2012-08-20  Richard Guenther  <rguenther@suse.de>

        * tree-flow.h (register_new_name_mapping): Remove.
        * tree-into-ssa.c (register_new_name_mapping): Likewise.
        (add_new_name_mapping): Do not push/pop timevar here.
        (create_new_def_for): Instead do it here.  Initialize
        update-ssa here, handle a NULL def.
        * tree-vrp.c (build_assert_expr_for): Use create_new_def_for.

2012-08-20  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/54327
        * gimple-fold.c (get_maxval_strlen): Do not walk use-def chains
        if the use is registered for SSA update.

2012-08-20  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/54321
        * tree-ssa-forwprop.c (simplify_builtin_call): Pass 0 instead of 1
        as second argument to tree_low_cst call on val2.

2012-08-20  Richard Guenther  <rguenther@suse.de>

        * gimple.h (gimple_statement_base): Annotate with GTY chain_next.

2012-08-20  Richard Guenther  <rguenther@suse.de>

        PR bootstrap/54326
        * genoutput.c (note_constraint): Properly use CONST_CAST.

2012-08-19  Nick Clifton  <nickc@redhat.com>

        PR target/54306
        * config/arm/mmintrin.h: Remove spurious #endif.

2012-08-18  Jan-Benedict Glaw  <jbglaw@lug-owl.de>

        * config/avr/avr-log.c (avr_log_vadump): Properly use
        int-promoted enum values.
        * config/avr/avr.h (struct mcu_type_s): Change `arch' from
        int to enum avr_arch.
        * config/avr/gen-avr-mmcu-texi.c (main): Use correct initializer.

2012-08-18  Jan Hubicka  <jh@suse.cz>

        PR lto/45375
        * ipa-inline.c (want_inline_small_function_p): Bypass
        inline limits for hinted functions.
        (edge_badness): Dump hints; decrease badness for hinted funcitons.
        * ipa-inline.h (enum inline_hints_vals): New enum.
        (inline_hints): New type.
        (edge_growth_cache_entry): Add hints.
        (dump_inline_summary): Update.
        (dump_inline_hints): Declare.
        (do_estimate_edge_hints): Declare.
        (estimate_edge_hints): New inline function.
        (reset_edge_growth_cache): Update.
        * predict.c (cgraph_maybe_hot_edge_p): Do not ice on indirect edges.
        * ipa-inline-analysis.c (dump_inline_hints): New function.
        (estimate_edge_devirt_benefit): Return true when function should be
        hinted.
        (estimate_calls_size_and_time): New hints argument; set it when
        devritualization happens.
        (estimate_node_size_and_time): New hints argument.
        (do_estimate_edge_time): Cache hints.
        (do_estimate_edge_growth): Update.
        (do_estimate_edge_hints): New function

2012-08-18  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        PR middle-end/53823
        * expmed.c (expand_mult): Skip synth_mult for negative coefficients
        if the mode is larger than a wide int and it is too costly to multiply
        by a positive multiplier and negate the result.

2012-08-18  Steven Bosscher  <steven@gcc.gnu.org>

        * sparseset.c (sparseset_alloc): Use non-clearing allocation.  Tell
        valgrind not to worry about reading from unitialized memory.

2012-08-18  Steven Bosscher  <steven@gcc.gnu.org>

        PR middle-end/54313
        * dse.c (dse_step7): Don't free kill_on_calls bitmap, it is
        freed when its obstack is release.

2012-08-18  Andrew Pinski  <pinskia@gmail.com>

        * alloc-pool.c (pool_alloc): Add valgrind markers.
        (pool_free): Likewise.

2012-08-17  Walter Lee  <walt@tilera.com>

        * config/tilegx/feedback.h (FEEDBACK_ENTER_EXPLICIT): Define.
        (FEEDBACK_ENTER): Define.
        (FEEDBACK_REENTER): Define.
        (FEEDBACK_ENTRY): Define.
        * config/tilepro/feedback.h: (FEEDBACK_ENTER_EXPLICIT): Define.
        (FEEDBACK_ENTER): Define.
        (FEEDBACK_REENTER): Define.
        (FEEDBACK_ENTRY): Define.

2012-08-17  H.J. Lu  <hongjiu.lu@intel.com>
            Gary Funck <gary@intrepid.com>

        PR target/20020
        * config/i386/i386.c (ix86_member_type_forces_blk): New function.
        (TARGET_MEMBER_TYPE_FORCES_BLK): New macro.

        * config/i386/i386.h (MAX_FIXED_MODE_SIZE): New macro.

2012-08-17  Marc Glisse  <marc.glisse@inria.fr>

        * simplify-rtx.c (simplify_binary_operation_1): Optimize shuffle of
        a concatenation.

2012-08-17  H.J. Lu  <hongjiu.lu@intel.com>

        * stor-layout.c (compute_record_mode): Replace
        MEMBER_TYPE_FORCES_BLK with targetm.member_type_forces_blk.
        (layout_type): Likewise.

        * system.h: Poison MEMBER_TYPE_FORCES_BLK.

        * target.def (member_type_forces_blk): New target hook.

        * targhooks.c (default_member_type_forces_blk): New.
        * targhooks.h (default_member_type_forces_blk): Likewise.

        * doc/tm.texi.in (MEMBER_TYPE_FORCES_BLK): Removed.
        (TARGET_MEMBER_TYPE_FORCES_BLK): New hook.
        * doc/tm.texi: Regenerated.

        * config/ia64/hpux.h (MEMBER_TYPE_FORCES_BLK): Removed.

        * config/ia64/ia64.c (ia64_member_type_forces_blk): New function.
        (TARGET_MEMBER_TYPE_FORCES_BLK): New macro.

        * config/rs6000/rs6000.c (TARGET_MEMBER_TYPE_FORCES_BLK): New macro.
        (rs6000_member_type_forces_blk): New function.

        * config/rs6000/rs6000.h (MEMBER_TYPE_FORCES_BLK): Removed.

        * config/xtensa/xtensa.c (xtensa_member_type_forces_blk): New function.
        (TARGET_MEMBER_TYPE_FORCES_BLK): New macro.

        * config/xtensa/xtensa.h (MEMBER_TYPE_FORCES_BLK): Removed.

2012-08-17  Diego Novillo  <dnovillo@google.com>

        PR bootstrap/54281
        * configure.ac: Add libintl.h to AC_CHECK_HEADERS list.
        * config.in: Regenerate.
        * configure: Regenerate.
        * intl.h: Always include libintl.h if HAVE_LIBINTL_H is set.

2012-08-17  Richard Guenther  <rguenther@suse.de>

        * bitmap.h (struct bitmap_element_def): GTY annotate next/prev.
        (struct bitmap_head_def): GTY skip current field.

2012-08-17  Steven Bosscher  <steven@gcc.gnu.org>

        PR middle-end/54146
        * tree-ssa-loop-im.c (lim_bitmap_obstack): New bitmap_obstack.
        (memref_free): Don't free the bitmaps individually here.
        (mem_ref_alloc): Allocate the bitmaps on the new bitmap obstack.
        (analyze_memory_references): Likewise.
        (tree_ssa_lim_initialize): Initialize the new bitmap obstack.
        (tree_ssa_lim_finalize): Release it.
        * dse.c (dse_bitmap_obstack): New bitmap obstack.
        (dse_obstack): New obstack.
        (get_group_info): Allocate the bitmaps on the new bitmap obstack.
        (dse_step0): Allocate the scratch bitmap on reg_obstack.  Initialize
        the new bitmap obstack and normal obstack.  Use XNEWVEC for bb_table.
        (record_store): Allocate regs_set on reg_obstack.
        (dse_step1): Allocate regs_live on reg_obstack.
        (dse_step2_init): Allocate offset_map_n and offset_map_p on the new
        obstack.
        (dse_step3_scan): Allocate bitmaps on the new bitmap obstack.
        (dse_step3): Likewise.
        (dse_confluence_0): Likewise.
        (dse_confluence_n): Likewise.
        (dse_transfer_function): Likewise.
        (dse_step7): Destroy the new obstacks, and everything allocated on
        them, in one big sweep.
        (rest_of_handle_dse): Update.
        * cfgexpand.c (stack_var_bitmap_obstack): New bitmap obstack.
        (add_stack_var_conflict): Allocate bitmaps on it.
        (add_scope_conflicts_1): Likewise.
        (add_scope_conflicts): Likewise.
        (update_alias_info_with_stack_vars): Likewise.
        (init_vars_expansion): Move TREE_USED fiddling expand_used_vars.
        Initialize the new bitmap obstack.
        (fini_vars_expansion): Release it.
        (estimated_stack_frame_size): Use init_vars_expansion to set things up
        and always clean up at the end.
        (expand_used_vars): Do the TREE_USED trickery here.  Always call
        fini_vars_expansion.
        * tree-ssa-live.h (struct tree_live_info_d): Make livein and liveout
        arrays of bitmap_head to avoid one indirection per bitmap access.
        (live_on_entry, live_on_exit, live_var_map, live_merge_and_clear,
        make_live_on_entry): Update.
        * tree-ssa-live.c (partition_view_bitmap): Don't double-free 'used'.
        (liveness_bitmap_obstack): New bitmap obstack.
        (remove_unused_locals): Use it to allocate all bitmaps on.  Update
        for livein/liveout changes in tree-ssa-live.h.
        (delete_tree_live_info): Release the bitmap obstack.
        (loe_visit_block, live_worklist, set_var_live_on_entry,
        calculate_live_on_exit, dump_live_info): Update.
        (calculate_live_ranges): Initialize the bitmap.
        * tree-ssa-ter.c (ter_bitmap_obstack): New bitmap obstack.
        (new_temp_expr_table): Allocate bitmap on it.
        (make_dependent_on_partition, add_to_partition_kill_list,
        add_dependence, process_replaceable): Likewise.
        (find_replaceable_exprs): Initialize and release the new obstack here.
        * df-problems.c (df_lr_add_problem): Allocate persistent bitmap
        for out_of_date_transfer_functions on df_bitmap_obstack.
        (df_live_add_problem): Likewise.
        (df_chain_add_problem): Likewise.
        (df_word_lr_add_problem): Likewise.

2012-08-17  Nick Clifton  <nickc@redhat.com>

        * config/fr30/fr30.md (cbranchsi4): Remove mode from comparison.
        (branch_true): Likewise.
        (branch_false): Likewise.

        * config/mcore/mcore.md (cbranchsi4): Remove mode from comparison.

        * config/iq2000/iq2000.md (cbranchsi4): Remove mode from
        comparison and label.
        (branch_zero): Likewise.
        (branch_zero_inverted): Likewise.
        (branch_equality): Likewise.
        (branch_equality_inverted): Likewise.
        (extend-and-compare): Disable until reload issues can be resolved.
        * config/iq2000/iq2000.c (gen_conditional_branch): Use VOIDmode
        for comparison.
        (iq2000_function_arg_advance): Remove CONST_CAST2.

        * config/mep/t-mep (mep-pragma.o): Use $(COMPILER) to compile
        mep-pragma.c.

2012-08-17  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/t-avr (gen-avr-mmcu-texi): Use $(CC) to compile
        gen-avr-mmcu-texi.c.

2012-08-17  Richard Earnshaw  <rearnsha@arm.com>

        * arm.md (arm_addsi3): New variant for Thumb2 16-bit ADD instruction.
        * arm.c (thumb2_reorg): Don't convert an ADD instruction that's
        already 16 bits.

2012-08-17  Richard Guenther  <rguenther@suse.de>

        * hash-table.h (class hash_table): Use a descriptor template
        argument instead of decomposed element type and support functions.
        (struct pointer_hash): New generic typed pointer-hash.
        (struct typed_free_remove, struct typed_noop_remove): Generic
        hash_table support pieces.
        * coverage.c (struct counts_entry): Add hash_table support members.
        * tree-ssa-ccp.c (gimple_htab): Use pointer_hash.
        * tree-ssa-coalesce.c (struct ssa_name_var_hash): New generic
        SSA name by SSA_NAME_VAR hash.
        (coalesce_ssa_name): Use it.
        * tree-ssa-pre.c (struct pre_expr_d): Add hash_table support.
        (expression_to_id): Adjust.
        (struct expr_pred_trans_d): Add hash_table support.
        (phi_translate_table): Adjust.
        (phi_trans_lookup): Likewise.
        (phi_trans_add): Likewise.
        (do_regular_insertion): Likewise.
        * tree-ssa-tail-merge.c (struct same_succ_def): Add hash_table support.
        (same_succ_htab): Adjust.
        (find_same_succ_bb): Likewise.
        (find_same_succ): Likewise.
        (update_worklist): Likewise.
        * tree-ssa-threadupdate.c (struct redirection_data): Add hash_table
        support.
        (redirection_data): Adjust.

2012-08-17  Richard Guenther  <rguenther@suse.de>

        * params.def (integer-share-limit): Decrease from 256 to 251,
        add rationale.

2012-08-17  Richard Guenther  <rguenther@suse.de>

        * tree-sra.c (modify_function): Free redirect_callers vector.
        * ipa-split.c (split_function): Free args_to_pass vector.
        * tree-vect-data-refs.c (vect_peeling_hash_get_lowest_cost): Free
        body_cost_vec properly.
        (vect_enhance_data_refs_alignment): Likewise.
        * tree-vect-stmts.c (vectorizable_operation): Do not pre-allocate
        vec_oprnds.
        (new_stmt_vec_info): Do not pre-allocate STMT_VINFO_SAME_ALIGN_REFS.
        * tree-vect-slp.c (vect_free_slp_instance): Free the instance.
        (vect_analyze_slp_instance): Free everything.
        (destroy_bb_vec_info): Free the SLP instances.

2012-08-17  Iain Sandoe  <iain@codesourcery.com>

        * config/rs6000/rs6000.c (macho_branch_islands): Adjust for changes
        to vec.h.

2012-08-17  Jakub Jelinek  <jakub@redhat.com>

        * doc/invoke.texi (-Wsizeof-pointer-memaccess): Document.

2012-08-16  Sandra Loosemore  <sandra@codesourcery.com>

        * config/mips/mips-dsp.md (mips_dpau_h_qbl, mips_dpau_h_qbr)
        (mips_dpsu_h_qbl, mips_dpsu_h_qbr, mips_dpaq_s_w_ph)
        (mips_dpsq_s_w_ph, mips_mulsaq_s_w_ph, mips_dpaq_sa_l_w)
        (mips_dpsq_sa_l_w, mips_maq_s_w_phl, mips_maq_s_w_phr)
        (mips_maq_sa_w_phl, mips_maq_sa_w_phr): Add accum_in attribute.

2012-08-16  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54236
        * config/sh/sh.md (addc): Add commutative modifier.
        (*addc, *minus_plus_one, *subc, *negc): New insns and splits.

2012-08-16  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/39423
        * config/sh/sh.md (*movsi_index_disp, *movhi_index_disp): Handle
        potential T_REG clobber.  Convert zero extending split to
        insn_and_split.

2012-08-16  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54089
        * config/sh/sh.md (ashlsi3_d): Do not split if it would result
        in a T_REG clobber.  Correct comment.
        (ashlsi3_n): Correct comment.

2012-08-16  Hans-Peter Nilsson  <hp@axis.com>

        PR middle-end/54261
        * optabs.c (expand_atomic_fetch_op): Save and restore code when
        retrying after failed attempt.

2012-08-16  Yuri Rumyantsev  <ysrumyan@gmail.com>

        * config/i386/i386-protos.h (ix86_split_lea_for_addr) : Add
        additional argument.
        * config/i386/i386.md (ix86_split_lea_for_addr) : Add
        additional argument curr_insn.
        * config/i386/i386.c (ix86_split_lea_for_addr): Load base or index
        register first, depending on their defintion distances.
        (ix86_lea_outperforms): Prefer LEA only if split cost exceeds
        AGU stall.
        (find_nearest_reg-def): New function. Find register with
        nearest definition.

2012-08-16  Walter Lee  <walt@tilera.com>

        * config.gcc (tilegx-*-linux*): Add feedback.h.
        (tilepro-*-linux*): Likewise.
        * config/tilegx/feedback.h: New file.
        * config/tilepro/feedback.h: New file.

2012-08-16  Diego Novillo  <dnovillo@google.com>

        Revert

        PR bootstrap/54281
        * double-int.h: Move including of gmp.h ...
        * system.h: ... here.
        * realmpfr.h: Do not include gmp.h.
        * tree-ssa-loop-niter.c: Do not include gmp.h.

2012-08-16  Segher Boessenkool  <segher@kernel.crashing.org>

        * config/rs6000/darwin.h (TARGET_IEEE_QUAD): Fix comment.

2012-08-16  Richard Guenther  <rguenther@suse.de>

        PR middle-end/54146
        * tree-ssa-loop-niter.c (find_loop_niter_by_eval): Free the
        exit vector.
        * ipa-pure-const.c (analyze_function): Use FOR_EACH_LOOP_BREAK.
        * cfgloop.h (FOR_EACH_LOOP_BREAK): Fix.
        * tree-ssa-structalias.c (handle_lhs_call): Properly free rhsc.
        * tree-into-ssa.c (get_ssa_name_ann): Allocate info only when needed.
        * tree-ssa-loop-im.c (analyze_memory_references): Adjust.
        (tree_ssa_lim_finalize): Free all mem_refs.
        * tree-ssa-sccvn.c (extract_and_process_scc_for_name): Free
        scc when bailing out.
        * modulo-sched.c (sms_schedule): Use FOR_EACH_LOOP_BREAK.
        * ira-build.c (loop_with_complex_edge_p): Free loop exit vector.
        * graphite-sese-to-poly.c (scop_ivs_can_be_represented): Use
        FOR_EACH_LOOP_BREAK.

2012-08-16  Diego Novillo  <dnovillo@google.com>

        PR bootstrap/54281
        * double-int.h: Move including of gmp.h ...
        * system.h: ... here.
        * realmpfr.h: Do not include gmp.h.
        * tree-ssa-loop-niter.c: Do not include gmp.h.

2012-08-16  Steven Bosscher  <steven@gcc.gnu.org>

        PR middle-end/54146
        * tree-flow.h (compute_global_livein): Remove prototype.
        * tree-into-ssa.c (compute_global_livein): Remove function.
        * tree-ssa-loop-manip.c: Include gimple-pretty-print.h.
        (find_sibling_superloop): New function.
        (compute_live_loop_exits): New function.
        (add_exit_phis_edge): Rename to add_exit_phi.  Do not allow
        inserting a PHI in a block that is not a loop exit for VAR.
        Add dumping if TDF_DETAILS.
        (add_exit_phis_var): Rewrite.
        (add_exit_phis): Update.
        (get_loops_exits): Rewrite to return an array of per-loop exits
        rather than one bitmap with all loop exits.
        (find_uses_to_rename_bb): Ignore virtual PHI nodes.
        (rewrite_into_loop_closed_ssa): Update.

2012-08-16  Nick Clifton  <nickc@redhat.com>

        * config/i386/i386elf.h (ASM_OUTPUT_ASCII): Cast _ascii_bytes
        before passing it to ASM_OUTPUT_LIMITED_STRING.

        * config/bfin/bfin.c (hwloop_optimize): Fix use of VEC_last macro.

        * config/avr/t-avr: Replace occurrences of $(CC) with $(COMPILER).
        * config/avr/avr.c (avr_legitimize_reload_address): Add casts
        for reload_type enums.
        (DEF_BUILTIN): Cast the icode to enum insn_code.

2012-08-15  Segher Boessenkool  <segher@kernel.crashing.org>

        * config/rs6000/aix43.h (ASM_CPU_SPEC): Use %(asm_default)
        instead of -mppc.
        * config/rs6000/aix51.h (ASM_CPU_SPEC): Ditto.

2012-08-15  Segher Boessenkool  <segher@kernel.crashing.org>

        * config/rs6000/aix43.h (TARGET_DEFAULT): Delete MASK_NEW_MNEMONICS.
        (RS6000_CALL_GLUE): Adjust for single assembler syntax.
        * config/rs6000/aix51.h (TARGET_DEFAULT, RS6000_CALL_GLUE): Ditto.
        * config/rs6000/aix52.h (TARGET_DEFAULT, RS6000_CALL_GLUE): Ditto.
        * config/rs6000/aix53.h (TARGET_DEFAULT, RS6000_CALL_GLUE): Ditto.
        * config/rs6000/aix61.h (TARGET_DEFAULT, RS6000_CALL_GLUE): Ditto.
        * config/rs6000/darwin.h (TARGET_DEFAULT): Ditto.
        * config/rs6000/darwin.md (whole file): Adjust to single
        assembler syntax.
        * config/rs6000/darwin64.h (TARGET_DEFAULT): Delete MASK_NEW_MNEMONICS.
        * config/rs6000/default64.h (TARGET_DEFAULT): Ditto.
        * config/rs6000/dfp.md: (whole file): Adjust to single
        assembler syntax.
        * config/rs6000/eabi.h (TARGET_DEFAULT): Delete MASK_NEW_MNEMONICS.
        * config/rs6000/eabialtivec.h (TARGET_DEFAULT): Ditto.
        * config/rs6000/eabispe.h (TARGET_DEFAULT): Ditto.
        * config/rs6000/linuxaltivec.h (TARGET_DEFAULT): Ditto.
        * config/rs6000/linuxspe.h (TARGET_DEFAULT): Ditto.
        * config/rs6000/rs6000-cpus.def (whole file): Delete POWERPC_BASE_MASK.
        * config/rs6000/rs6000-tables.opt: Regenerate.
        * config/rs6000/rs6000.c (POWERPC_BASE_MASK): Delete.
        (num_insns_constant_wide): Adjust comments.
        (whole file): Adjust to single assembler syntax.
        (output_cbranch): Adjust comment.
        * config/rs6000/rs6000.h (ASSEMBLER_DIALECT): Delete.
        * config/rs6000/rs6000.md: (whole file): Adjust to single
        assembler syntax.
        * config/rs6000/rs6000.opt (mnew-mnemonics): Delete.
        (mold-mnemonics): Delete.
        * config/rs6000/spe.md: (whole file): Adjust to single
        assembler syntax.
        * config/rs6000/sync.md: (whole file): Adjust to single
        assembler syntax.
        * config/rs6000/sysv4.h (TARGET_DEFAULT): Delete MASK_NEW_MNEMONICS.
        (ASM_OUTPUT_REG_PUSH): Adjust.
        (ASM_OUTPUT_REG_POP): Adjust.
        * config/rs6000/sysv4le.h (TARGET_DEFAULT): Delete MASK_NEW_MNEMONICS.
        * config/rs6000/vsx.md: (whole file): Adjust to single
        assembler syntax.
        * config/rs6000/vxworks.h (TARGET_DEFAULT): Delete MASK_NEW_MNEMONICS.
        * doc/invoke.texi: Adjust documentation to reflect the
        removal of -mnew-mnemonics and -mold-mnemonics.

2012-08-15  Segher Boessenkool  <segher@kernel.crashing.org>

        * common/config/rs6000/rs6000-common.c (rs6000_handle_option):
        Delete handling for -mno-powerpc and -mpowerpc.
        * config/rs6000/aix43.h (ASM_CPU_SPEC): Similar.
        (ASM_DEFAULT_SPEC): Use -mppc instead of -mcom.
        * config/rs6000/aix51.h (ASM_CPU_SPEC, ASM_DEFAULT_SPEC): Ditto.
        * config/rs6000/aix52.h (TARGET_DEFAULT): Delete MASK_POWERPC.
        * config/rs6000/aix53.h (TARGET_DEFAULT): Ditto.
        * config/rs6000/aix61.h (TARGET_DEFAULT): Ditto.
        * config/rs6000/darwin.h (TARGET_DEFAULT): Ditto.
        * config/rs6000/darwin64.h (TARGET_DEFAULT): Ditto.
        * config/rs6000/default64.h (TARGET_DEFAULT): Ditto.
        * config/rs6000/driver-rs6000.c (asm_names): Delete handling
        for -mcpu=common and -mpowerpc.
        * config/rs6000/eabi.h (TARGET_DEFAULT): Delete MASK_POWERPC.
        * config/rs6000/eabialtivec.h (TARGET_DEFAULT): Ditto.
        * config/rs6000/eabispe.h (TARGET_DEFAULT): Ditto.
        * config/rs6000/linuxaltivec.h (TARGET_DEFAULT): Ditto.
        * config/rs6000/linuxspe.h (TARGET_DEFAULT): Ditto.
        * config/rs6000/rs6000-builtin.def (RS6000_BUILTIN_CFSTRING):
        Use RS6000_BTM_ALWAYS instead of RS6000_BTM_POWERPC.
        * config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Adjust.
        (rs6000_cpu_cpp_builtins): Adjust.
        * config/rs6000/rs6000.c (POWERPC_BASE_MASK): Delete MASK_POWERPC.
        (rs6000_builtin_mask_calculate): Adjust.
        (rs6000_emit_move): Delete code for ! TARGET_POWERPC.
        (rs6000_init_libfuncs): Ditto.
        (rs6000_output_function_prologue): Ditto.
        (rs6000_opt_masks): Delete MASK_POWERPC.
        (rs6000_builtin_mask_names): Delete RS6000_BTM_POWERPC.
        * config/rs6000/rs6000.h (ASM_CPU_SPEC): Delete handling for -mpowerpc.
        (RS6000_BTM_POWERPC): Delete.
        (RS6000_BTM_COMMON): Delete RS6000_BTM_POWERPC.
        * config/rs6000/rs6000.md (extendqisi2 patterns): Adjust for
        TARGET_POWERPC always on.
        (extendqihi2 patterns): Similar.
        (various unnamed subtract patterns): Similar.
        (bswaphi2 patterns): Similar.
        (divmodsi4): Similar.
        (udiv<GPR:mode>3): Similar.
        (div<GPR:mode>3 patterns): Similar.
        (udivmodsi4): Similar.
        (mulhcall): Delete.
        (mullcall): Delete.
        (divss_call): Delete.
        (divus_call): Delete.
        (quoss_call): Delete.
        (quous_call): Delete.
        (insvsi patterns): Adjust.
        (addsf3 patterns): Adjust.
        (subsf3 patterns): Adjust.
        (mulsf3 patterns): Adjust.
        (divsf3 patterns): Adjust.
        (*fmasf4_fpr): Adjust.
        (*fmssf4_fpr): Adjust.
        (*nfmasf4_fpr): Adjust.
        (*nfmssf4_fpr): Adjust.
        (*floatunssidf2_internal): Adjust.
        (fix_trunc<SFDF:mode>si2_internal): Adjust.
        (fctiwz_<SFDF:mode>): Adjust.
        (mulsidi3 patterns): Adjust.
        (smulsi3_highpart patterns): Adjust.
        (umulsi3_highpart patterns): Adjust.
        (fix_trunctfsi2 patterns): Adjust.
        (prefetch): Adjust.
        * config/rs6000/rs6000.opt (mpowerpc): Replace by stub option.
        (mno-powerpc): Delete.
        * config/rs6000/sync.md (load_locked<ATOMIC:mode>): Adjust.
        (store_conditional<ATOMIC:mode>): Adjust.
        (atomic_compare_and_swap<ATOMIC:mode>): Adjust.
        (atomic_exchange<ATOMIC:mode>): Adjust.
        (atomic_<fetchop_name><ATOMIC:mode>): Adjust.
        (atomic_nand<ATOMIC:mode>): Adjust.
        (atomic_fetch_<fetchop_name><ATOMIC:mode>): Adjust.
        (atomic_fetch_nand<ATOMIC:mode>): Adjust.
        (atomic_<fetchop_name>_fetch<ATOMIC:mode>): Adjust.
        (atomic_nand_fetch<ATOMIC:mode>): Adjust.
        * config/rs6000/sysv4.h (TARGET_DEFAULT): Delete MASK_POWERPC.
        * config/rs6000/sysv4le.h (TARGET_DEFAULT): Ditto.
        * config/rs6000/vxworks.h (TARGET_DEFAULT): Ditto.
        * doc/invoke.texi: Adjust documentation.

2012-08-15  Segher Boessenkool  <segher@kernel.crashing.org>

        * config/rs6000/rs6000.h (RS6000_BTM_ALWAYS): New.

2012-08-15  Segher Boessenkool  <segher@kernel.crashing.org>

        * config/rs6000/aix52.h (ASM_CPU_SPEC): Fix typo.
        * config/rs6000/aix53.h (ASM_CPU_SPEC): Ditto.
        * config/rs6000/aix61.h (ASM_CPU_SPEC): Ditto.
        * config/rs6000/driver-rs6000.c (asm_names): Ditto.

2012-08-15  Segher Boessenkool  <segher@kernel.crashing.org>

        PR target/54142
        * config/rs6000/driver-rs6000.c (asm_names): Use %(asm_default)
        instead of -mcom.
        * config/rs6000/rs6000.h (ASM_CPU_SPEC): Ditto.

2012-08-15  Sandra Loosemore  <sandra@codesourcery.com>
            Maxim Kuvyrkov  <maxim@codesourcery.com>
            Julian Brown  <julian@codesourcery.com>
            MIPS Technologies, Inc.

        * config/mips/mips.md (dspmac, dspmacsat, accext, accmod, dspalu)
        (dspalusat): Add insn types.
        * config/mips/mips-dsp.md (add<DSPV:mode>3)
        (mips_add<DSP:dspfmt1>_s_<DSP:dspfmt2>)
        (sub<DSPV:mode>3, mips_sub<DSP:dspfmt1>_s_<DSP:dspfmt2>, mips_addsc)
        (mips_addwc, mips_modsub, mips_raddu_w_qb, mips_absq_s_<DSPQ:dspfmt2>)
        (mips_precrq_qb_ph, mips_precrq_ph_w, mips_precrq_rs_ph_w)
        (mips_precrqu_s_qb_ph, mips_preceq_w_phl, mips_preceq_w_phr)
        (mips_precequ_ph_qbl, mips_precequ_ph_qbr, mips_precequ_ph_qbla)
        (mips_precequ_ph_qbra, mips_preceu_ph_qbl, mips_preceu_ph_qbr)
        (mips_preceu_ph_qbla, mips_preceu_ph_qbra, mips_shll_<DSPV:dspfmt2>)
        (mips_shll_s_<DSPQ:dspfmt2>, mips_shll_s_<DSPQ:dspfmt2>, mips_shrl_qb)
        (mips_shra_ph, mips_shra_r_<DSPQ:dspfmt2>, mips_bitrev, mips_insv)
        (mips_repl_qb, mips_repl_ph)
        (mips_cmp<DSPV:dspfmt1_1>_eq_<DSPV:dspfmt2>)
        (mips_cmp<DSPV:dspfmt1_1>_lt_<DSPV:dspfmt2>)
        (mips_cmp<DSPV:dspfmt1_1>_le_<DSPV:dspfmt2>, mips_cmpgu_eq_qb)
        (mips_cmpgu_lt_qb, mips_cmpgu_le_qb, mips_pick_<DSPV:dspfmt2>)
        (mips_packrl_ph, mips_wrdsp, mips_rddsp): Change type to dspalu.
        (mips_dpau_h_qbl, mips_dpau_h_qbr, mips_dpsu_h_qbl, mips_dpsu_h_qbr)
        (mips_dpaq_s_w_ph, mips_dpsq_s_w_ph, mips_mulsaq_s_w_ph)
        (mips_maq_s_w_phl, mips_maq_s_w_phr, mips_maq_sa_w_phr): Set type to
        dspmac.
        (mips_dpaq_sa_l_w, mips_dpsq_sa_l_w, mips_maq_sa_w_phl): Set type to
        dspmacsat.
        (mips_extr_w, mips_extr_r_w, mips_extr_rs_w, mips_extp, mips_extpdp):
        Set type to accext.
        (mips_shilo, mips_mthlip): Set type to accmod.
        * config/mips/mips-dspr2.md (mips_absq_s_qb, mips_addu_s_ph)
        (mips_adduh_r_qb): Set type to dspalusat.
        (mips_addu_ph, mips_adduh_qb, mips_append, mips_balign)
        (mips_cmpgdu_eq_qb, mips_cmpgdu_lt_qb, mips_cmpgdu_le_qb)
        (mips_precr_qb_ph, mips_precr_sra_ph_w, mips_precr_sra_r_ph_w)
        (mips_prepend, mips_shra_qb, mips_shra_r_qb, mips_shrl_ph)
        (mips_subu_ph, mips_subuh_qb, mips_subuh_r_qb, mips_addqh_ph)
        (mips_addqh_r_ph, mips_addqh_w, mips_addqh_r_w, mips_subqh_ph)
        (mips_subqh_r_ph, mips_subqh_w, mips_subqh_r_w): Set type to dspalu.
        (mips_dpa_w_ph, mips_dps_w_ph, mips_mulsa_w_ph, mips_dpax_w_ph)
        (mips_dpsx_w_ph, mips_dpaqx_s_w_ph, mips_dpsqx_s_w_ph): Set type to
        dspmac.  Set accum_in attribute.
        (mips_subu_s_ph): Set type to dspalusat.
        (mips_dpaqx_sa_w_ph, mips_dpsqx_sa_w_ph): Set type to dspmacsat.
        Set accum_in attribute.
        * config/mips/mips-protos.h (mips_dspalu_bypass_p): Add prototype.
        * config/mips/mips.c (dspalu_bypass_table): New.
        (mips_dspalu_bypass_p): New.
        * config/mips/24k.md (r24k_dsp_alu, r24k_dsp_mac, r24k_dsp_mac_sat)
        (r24k_dsp_acc_ext, r24k_dsp_acc_mod): New insn reservations.
        (r24k_int_mult, r24k_int_mthilo, r24k_dsp_mac, r24k_dsp_mac_sat)
        (r24k_dsp_acc_ext, r24k_dsp_acc_mod, r24k_dsp_alu): New bypasses.
        * config/mips/74k.md (r74k_dsp_alu, r74k_dsp_alu_sat, r74k_dsp_mac)
        (r74k_dsp_mac_sat, r74k_dsp_acc_ext, r74k_dsp_acc_mod): New insn
        reservations.
        (r74k_dsp_mac, r74k_dsp_mac_sat, r74k_int_mult, r74k_int_mul3)
        (r74k_dsp_mac, r74k_dsp_mac_sat): New bypasses.

2012-08-15  Ulrich Weigand  <Ulrich.Weigand@de.ibm.com>

        * config/spu/spu.c: Include "cfgloop.h".
        (spu_machine_dependent_reorg): Call loop_optimizer_init and
        loop_optimizer_finalize.  Use bb_loop_depth instead of loop_depth.
        Directly compare loop_father values where appropriate.
        * config/spu/t-spu-elf (spu.o): Update dependencies.

2012-08-15  H.J. Lu  <hongjiu.lu@intel.com>

        * Makefile.in (tree-cfg.o): Also depend on $(TARGET_H).

2012-08-15  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

        PR tree-optimization/54245
        * gimple-ssa-strength-reduction.c (legal_cast_p_1): New function.
        (legal_cast_p): Split out logic to legal_cast_p_1.
        (analyze_increments): Avoid introducing multiplies in smaller types.

2012-08-15  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

        PR tree-optimization/54240
        * tree-ssa-phiopt.c (hoist_adjacent_loads): Correct test for
        existence of conditional move with given mode.

2012-08-15  Richard Guenther  <rguenther@suse.de>

        * double-int.h (double_int::from_unsigned): Rename to ...
        (double_int::from_uhwi): ... this.
        (double_int::from_signed): Rename to ...
        (double_int::from_shwi): ... this.
        (double_int::to_signed): Rename to ...
        (double_int::to_shwi): ... this.
        (double_int::to_unsigned): Rename to ...
        (double_int::to_uhwi): ... this.
        (double_int::fits_unsigned): Rename to ...
        (double_int::fits_uhwi): ... this.
        (double_int::fits_signed): Rename to ...
        (double_int::fits_shwi): ... this.
        (double_int::fits): Rename to ...
        (double_int::fits_hwi): ... this.
        * double-int.c: Likewise.

2012-08-15  Steven Bosscher  <steven@gcc.gnu.org>

        * timevar.def (TV_VARPOOL, TV_WHOPR_WPA_LTRANS_EXEC, TV_LIFE,
        TV_LIFE_UPDATE, TV_DF_UREC, TV_INLINE_HEURISTICS,
        TV_TREE_LINEAR_TRANSFORM, TV_TREE_LOOP_INIT, TV_TREE_LOOP_FINI,
        TV_VPT, TV_LOCAL_ALLOC, TV_GLOBAL_ALLOC, TV_SEQABSTR): Remove.
        (TV_IPA_INLINING, TV_FLATTEN_INLINING, TV_EARLY_INLINING,
        TV_INLINE_PARAMETERS, TV_LOOP_INIT, TV_LOOP_FINI): New.
        * timevar.c (timevar_print): Make printing width of timevar names
        more flexible, but enforce maximum length.
        * ipa-inline.c (pass_early_inline): Use TV_EARLY_INLINING.
        (pass_ipa_inline): Use TV_IPA_INLINING.
        * ipa-inline-analysis.c (pass_inline_parameters): Use
        TV_INLINE_HEURISTICS.
        * tree-ssa-loop.c (pass_tree_loop_init): No timevar for wrapper pass.
        (pass_tree_loop_done): Likewise.
        * final.c (pass_shorten_branches): Use TV_SHORTEN_BRANCH.
        * loop-init.c (loop_optimizer_init): Push/pop TV_LOOP_INIT.
        (loop_optimizer_finalize): Push/pop TV_LOOP_FINI.

2012-08-15  Ramana Radhakrishnan  <ramana.radhakrishnan@linaro.org>

        * config/arm/neon.md (neon_vaba<mode> VDQIW): Canonicalize operands.
        (neon_vabal<mode> VDQIW): Likewise.

2012-08-15  Ramana Radhakrishnan  <ramana.radhakrishnan@linaro.org>

        PR target/54212
        * config/arm/neon.md (vec_set<mode>_internal VD,VQ): Do not
        mark as predicable. Adjust asm template.
        (vec_setv2di_internal): Likewise.
        (vec_extract<mode> VD, VQ): Likewise.
        (vec_extractv2di): Likewise.
        (neon_vget_lane<mode>_sext_internal VD, VQ): Likewise.
        (neon_vset_lane<mode>_sext_internal VD, VQ): Likewise.
        (neon_vdup_n<mode> VX, V32): Likewise.
        (neon_vdup_nv2di): Likewise.

2012-08-14  Maxim Kuvyrkov  <maxim@codesourcery.com>

        * config/mips/mips.md (define_attr accum_in): New instruction
        attribute.  Set it for imadd and fmadd patterns.
        * config/mips/mips.c (mips_linked_madd_p): Use accum_in to extract
        accumulator register.

2012-08-14  Diego Novillo  <dnovillo@google.com>

        Merge from cxx-conversion branch.  Configury.

        * configure.ac (CXX_FOR_BUILD): Define and substitute.
        (BUILD_CXXFLAGS): Define.
        Remove all handlers of ENABLE_BUILD_WITH_CXX.
        Force all build to be with C++.
        * Makefile.in (BUILD_CXXFLAGS): Use it.
        Remove all handlers of ENABLE_BUILD_WITH_CXX.
        * configure: Regenerate.
        * config.in: Regenerate.
        * doc/install.texi: Remove documentation for --enable-build-with-cxx
        and --enable-build-poststage1-with-cxx.

2012-08-14  Diego Novillo  <dnovillo@google.com>

        Merge from cxx-conversion branch.  Re-implement VEC in C++.

        * vec.c (vec_heap_free): Convert into a template function.
        (vec_gc_o_reserve_1): Make extern.
        (vec_gc_p_reserve): Remove.
        (vec_gc_p_reserve_exact): Remove.
        (vec_gc_o_reserve): Remove.
        (vec_gc_o_reserve_exact): Remove.
        (vec_heap_o_reserve_1): Make extern.
        (vec_heap_p_reserve): Remove.
        (vec_heap_p_reserve_exact): Remove.
        (vec_heap_o_reserve): Remove.
        (vec_heap_o_reserve_exact): Remove.
        (vec_stack_p_reserve): Remove.
        (vec_stack_p_reserve_exact): Remove.
        * vec.h (VEC_CHECK_INFO, VEC_CHECK_DECL, VEC_CHECK_PASS, VEC_ASSERT,
        VEC_ASSERT_FAIL, vec_assert_fail): Move earlier in the file.
        (VEC): Define to vec_t<T>.
        (vec_allocation_t): Define.
        (struct vec_prefix): Move earlier in the file.
        (vec_t<T>): New template.
        (DEF_VEC_I, DEF_VECL_ALLOC_I, DEF_VEC_P, DEF_VEC_ALLOC_P,
        DEF_VEC_O, DEF_VEC_ALLOC_P, DEF_VEC_O, DEF_VEC_ALLOC_O,
        DEF_VEC_ALLOC_P_STACK, DEF_VEC_ALLOC_O_STACK,
        DEF_VEC_ALLOC_I_STACK): Expand to 'struct vec_swallow_trailing_semi'.
        (DEF_VEC_A): Provide template instantiations for
        GC/PCH markers that do not traverse the vector.
        (vec_stack_p_reserve): Remove.
        (vec_stack_p_reserve_exact): Remove.
        (vec_stack_p_reserve_exact_1): Remove.
        (vec_stack_o_reserve): Remove.
        (vec_stack_o_reserve_exact): Remove.
        (vec_stack_free): Re-write as a template function.
        (vec_reserve): New template function.
        (vec_reserve_exact): New template function.
        (vec_heap_free): New template function if GATHER_STATISTICS is
        defined.  Otherwise, macro that expands to free().
        (VEC_length_1): New template function.
        (VEC_length): Call it.
        (VEC_empty_1): New template function.
        (VEC_empty): Call it.
        (VEC_address_1): New template function.
        (VEC_address): Call it.
        (VEC_last_1): New template function.
        (VEC_last): Call it.  Change return type to T&.
        Change all users that used VEC_Os.
        (VEC_index_1): New template function.
        (VEC_index): Call it.  Return a T& instead of a T*.
        Update all callers that were using VEC_O before.
        (VEC_iterate_1): New template function.
        (VEC_iterate): Call it.
        (VEC_embedded_size_1): New template function.
        (VEC_embedded_size): Call it.
        (VEC_embedded_init_1): New template function.
        (VEC_embedded_init): Call it.
        (VEC_alloc_1): New template function.
        (VEC_alloc): Call it.  If A is 'stack', call XALLOCAVAR to
        do the allocation.
        (VEC_free_1): New template function.
        (VEC_free): Call it.
        (VEC_copy_1): New template function.
        (VEC_copy): Call it.
        (VEC_space_1): New template function
        (VEC_space): Call it.
        (VEC_reserve_1): New template function.
        (VEC_reserve): Call it.
        (VEC_reserve_exact_1): New template function.
        (VEC_reserve_exact): Call it.
        (VEC_splice_1): New template function.
        (VEC_splice): Call it.
        (VEC_safe_splice_1): New template function.
        (VEC_safe_splice): Call it.
        (VEC_quick_push_1): New template function.  Create two overloads, one
        accepting T, the other accepting T *.  Update all callers
        where T and T * are ambiguous.
        (VEC_quick_push): Call it.
        (VEC_safe_push_1): New template function. Create two overloads, one
        accepting T, the other accepting T *.  Update all callers
        where T and T * are ambiguous.
        (VEC_safe_push): Call it.
        (VEC_pop_1): New template function.
        (VEC_pop): Call it.
        (VEC_truncate_1): New template function.
        (VEC_truncate): Call it.
        (VEC_safe_grow_1): New template function.
        (VEC_safe_grow): Call it.
        (VEC_safe_grow_cleared_1): New template function.
        (VEC_safe_grow_cleared): Call it.
        (VEC_replace_1): New template function.
        (VEC_replace): Call it.  Always accept T instead of T*.
        Update all callers that used VEC_Os.
        (VEC_quick_insert_1): New template function.
        (VEC_quick_insert): Call it.
        (VEC_safe_insert_1): New template function.
        (VEC_safe_insert): Call it.
        (VEC_ordered_remove_1): New template function.
        (VEC_ordered_remove): Call it.
        (VEC_unordered_remove_1): New template function.
        (VEC_unordered_remove): Call it.
        (VEC_block_remove_1): New template function.
        (VEC_block_remove): Call it.
        (VEC_lower_bound_1): New template function.
        (VEC_lower_bound): Call it.
        (VEC_OP): Remove.
        (DEF_VEC_FUNC_P): Remove.
        (DEF_VEC_ALLOC_FUNC_P): Remove.
        (DEF_VEC_NONALLOC_FUNCS_P): Remove.
        (DEF_VEC_FUNC_O): Remove.
        (DEF_VEC_ALLOC_FUNC_O): Remove.
        (DEF_VEC_NONALLOC_FUNCS_O): Remove.
        (DEF_VEC_ALLOC_FUNC_I): Remove.
        (DEF_VEC_NONALLOC_FUNCS_I): Remove.
        (DEF_VEC_ALLOC_FUNC_P_STACK): Remove.
        (DEF_VEC_ALLOC_FUNC_O_STACK): Remove.
        (DEF_VEC_ALLOC_FUNC_I_STACK): Remove.
        (vec_reserve_exact): New template function.

        * gengtype-lex.l (DEF_VEC_ALLOC_[IOP]/{EOID}): Remove.
        * gengtype-parse.c (token_names): Remove DEF_VEC_ALLOC_[IOP].
        (typedef_name): Emit vec_t<C1> instead of VEC_C1_C2.
        (def_vec_alloc): Remove.  Update all callers.
        * gengtype.c (filter_type_name): New.
        (output_mangled_typename): Call it.
        (write_func_for_structure): Likewise.
        (write_types): Likewise.
        (write_root): Likewise.
        (write_typed_alloc_def): Likewise.
        (note_def_vec): Emit vec_t<TYPE_NAME> instead of VEC_TYPE_NAME_base.
        (note_def_vec_alloc): Remove.
        * gengtype.h (note_def_vec_alloc): Remove.
        (DEFVEC_ALLOC): Remove token code.

        * df-scan.c (df_bb_verify): Remove call to df_free_collection_rec
        inside the insn traversal loop.
        * gimplify.c (gimplify_compound_lval): Rename STACK to EXPR_STACK.
        * ipa-inline.c (inline_small_functions): Rename HEAP to EDGE_HEAP.
        * reg-stack.c (stack): Rename to STACK_PTR.  Update all users.
        * tree-vrp.c (stack): Rename to EQUIV_STACK.  Update all users.

        * config/bfin/bfin.c (hwloop_optimize): Update some calls to
        VEC_* for vectors of non-pointers.
        * config/c6x/c6x.c (try_rename_operands): Likewise.
        (reshuffle_units): Likewise.
        * config/mips/mips.c (mips_multi_start): Likewise.
        (mips_multi_add): Likewise.
        (mips_multi_copy_insn): Likewise.
        (mips_multi_set_operand): Likewise.
        * hw-doloop.c (discover_loop): Likewise.
        (discover_loops): Likewise.
        (reorg_loops): Likewise.

2012-08-14  Diego Novillo  <dnovillo@google.com>

        Merge from cxx-conversion branch.  C++ support in gengtype.

        * coretypes.h (gt_pointer_operator): Move from ...
        * ggc.h: ... here.
        * doc/gty.texi: Document support for C++ templates and
        user-provided markers.
        * gengtype-lex.l: Update copyright year.
        Remove support for recognizing DEF_VEC_O, DEF_VEC_P and DEFVEC_I.
        * gengtype-parse.c: Update copyright year.
        (token_names): Remove DEF_VEC_O, DEF_VEC_P and DEF_VEC_I.
        (require_template_declaration): New.
        (typedef_name): Call it.
        (type): Replace IS_UNION with KIND. Replace all users.
        (def_vec): Remove.  Update all users.
        * gengtype-state.c (type_lineloc): Handle TYPE_USER_STRUCT.
        (write_state_user_struct_type): New.
        (write_state_type): Call it.
        (read_state_user_struct_type): New.
        (read_state_type): Call it.
        * gengtype.c: Update copyright year.
        (dump_pair): Move declaration to the top.
        (dump_type): Likewise.
        (dump_type_list): Likewise.
        (dbgprint_count_type_at): Handle TYPE_USER_STRUCT.
        (create_user_defined_type): New.
        (resolve_typedef): Call it.
        (new_structure): Replace argument ISUNION with KIND.
        Change users to refer to KIND directly.
        Update all callers.
        (find_structure): Likewise.
        (set_gc_used_type): Handle TYPE_USER_STRUCT.
        (create_file): Update HDR to include new copyright year.
        (struct walk_type_data): Add field IN_PTR_FIELD.
        (output_mangled_typename): Handle TYPE_USER_STRUCT.
        (walk_type): Set D->IN_PTR_FIELD when walking a TYPE_POINTER.
        Clear it afterwards.
        Handle TYPE_USER_STRUCT.
        (write_types_process_field): Handle TYPE_USER_STRUCT.
        (get_type_specifier): Move earlier in the file.
        (write_type_decl): New.
        (write_marker_function_name): New.
        (write_user_func_for_structure_ptr): New.
        (write_user_func_for_structure_body): New.
        (write_user_marking_functions): New.
        (write_func_for_structure): Call write_marker_function_name
        and write_type_decl.
        Do not call walk_type for TYPE_USER_STRUCT. Emit a call to the user
        function directly.
        Call write_user_marking_functions on TYPE_USER_STRUCTs.
        (write_types_local_user_process_field): New.
        (write_pch_user_walking_for_structure_body): New.
        (write_pch_user_walking_functions): New.
        (write_types_local_process_field): Handle TYPE_USER_STRUCT.
        (write_local_func_for_structure): Do not call walk_type for
        TYPE_USER_STRUCT. Instead, emit the call to gt_pch_nx directly.
        Call write_pch_user_walking_functions for TYPE_USER_STRUCTs.
        (write_root): Handle TYPE_USER_STRUCT.
        (vec_prefix_type): Remove.  Update all users.
        (note_def_vec): Remove.  Update all users.
        (dump_typekind): Handle TYPE_USER_STRUCT.
        (dump_type): Initialize SEEN_TYPES, if needed.
        Handle TYPE_USER_STRUCT.
        (dump_everything): Do not initialize SEEN_TYPES.
        * gengtype.h: Update copyright year.
        (enum typekind): Add TYPE_USER_STRUCT.
        (union_or_struct_p): Rename from UNION_OR_STRUCT_P.
        Convert into function.
        Add an overload taking const_type_p.
        Update all callers.
        (new_structure): Change second field to type enum typekind.
        Update all users.
        (find_structure): Likewise.
        (note_def_vec): Remove.
        (DEFVEC_OP): Remove.
        (DEFVEC_I): Remove.
        * ggc-page.c (gt_ggc_mx): Add entry points for marking
        'const char *&', 'unsigned char *&' and 'unsigned char&'.
        * ggc-zone.c (gt_ggc_mx): Add entry points for marking
        'const char *&' and 'unsigned char *&'.
        * stringpool.c (gt_pch_nx): Add entry points for marking
        'const char *&', 'unsigned char *&' and 'unsigned char&'.
        Add an entry point for the overload taking arguments 'unsigned char
        *', 'gt_pointer_operator' and 'void *'.
        * vec.h (struct vec_prefix): Remove GTY marker.
        (struct vec_t): Remove GTY((length)) attribute from field 'vec'.
        (gt_ggc_mx (vec_t<T> *)): New template function.
        (gt_pch_nx (vec_t<T> *)): New template function.
        (gt_pch_nx (vec_t<T *> *, gt_pointer_operator, void *)): New template
        function.
        (gt_pch_nx (vec_t<T> *, gt_pointer_operator, void *)): New template
        function.

        * basic-block.h (struct edge_def): Mark GTY((user)).
        Remove all GTY markers from fields.
        (gt_ggc_mx): Declare.
        (gt_pch_nx): Declare.
        * tree-cfg.c (gt_ggc_mx): New.
        (gt_pch_nx): New.

        * gengtype-lex.l (USER_GTY): Add pattern for "user".
        * gengtype-parse.c (option): Handle USER_GTY.
        (opts_have): New.
        (type): Call it.
        If the keyword 'user' is used, do not walk the fields
        of the structure.
        * gengtype.h (USER_GTY): Add.
        * doc/gty.texi: Update.

2012-08-14  Lawrence Crowl  <crowl@google.com>

        Merge cxx-conversion branch.  Implement C++ hash table.

        * hash-table.h: New. Implementation borrowed from libiberty/hashtab.c.
        * hash-table.c: Likewise.
        * tree-ssa-tail-merge.c: Include hash-table.h instead of hashtab.h.
        (static htab_t same_succ_htab): Change type to hash_table;
        move specification of helper functions from create call to declaration.
        Change users to invoke member functions.
        (same_succ_print_traverse): Make extern ssa_.... Change callers.
        Remove void* casting.
        (same_succ_hash): Likewise.
        (same_succ_equal): Likewise.
        (same_succ_delete): Likewise.
        * tree-ssa-threadupdate.c: Include hash-table.h.
        (struct local_info): Rename to ssa_local_info_t to avoid overloading
        the type name local_info with the variable name local_info.
        (static htab_t redirection_data): Change type to hash_table.
        Move specification of helper functions from create call to declaration.
        Change users to invoke member functions.
        (redirection_data_hash): Make extern ssa_.... Change callers.
        Remove void* casting.
        (redirection_data_eq): Likewise.
        (fix_duplicate_block_edges): Likewise.
        (create_duplicates): Likewise.
        (fixup_template_block): Likewise.
        (redirect_edges): Likewise.
        (lookup_redirection_data): Change types associated with the hash table
        from void* to their actual type. Remove unnecessary casts.
        * tree-ssa-ccp.c: Include hash-table.h.
        (typedef gimple_htab): New.  Uses hash_table.  Replace specific uses
        of htab_t with gimple_htab.  Change users to invoke member functions.
        Move specification of helper functions from create call to declaration.
        * tree-ssa-coalesce.c: Include hash-table.h instead of hashtab.h.
        (hash_ssa_name_by_var): Make extern. Remove void* casting.
        (eq_ssa_name_by_var): Likewise.
        (coalesce_ssa_name): Change type of local static htab_t ssa_name_hash
        to hash_table. Change users to invoke member functions.
        Move specification of helper functions from create call to declaration.
        * coverage.c: Include hash-table.h instead of hashtab.h.
        (static htab_t counts_hash): Change type to hash_table;
        move specification of helper functions from create call to declaration.
        Change users to invoke member functions.
        (htab_counts_entry_hash): Make extern. Rename with coverage_... instead
        of htab_... Remove void* casting.
        (htab_counts_entry_eq): Likewise.
        (htab_counts_entry_del): Likewise.
        * tree-ssa-pre.c: Include hash-table.h instead of hashtab.h.
        (static htab_t expression_to_id): Change type to hash_table.
        Move specification of helper functions from create call to declaration.
        Change users to invoke member functions.
        (static htab_t phi_translate_table): Likewise.
        (pre_expr_eq): Make extern ssa_.... Change callers.
        Remove void* casting.
        (pre_expr_hash): Likewise.
        (expr_pred_trans_hash): Likewise.
        (expr_pred_trans_eq): Likewise.
        (alloc_expression_id): Change types associated with the hash table
        from void* to their actual type. Remove unnecessary casts.
        (lookup_expression_id): Likewise.
        (phi_trans_lookup): Likewise.
        (phi_trans_add): Likewise.
        * stringpool.c: Rename uses of libcpp typedef hash_table to
        cpp_hash_table.
        * Makefile.in: Add hash-table.o to OBJS-libcommon-target.
        Add $(HASH_TABLE_H). Add new dependences on $(HASH_TABLE_H).

2012-08-14  Lawrence Crowl  <crowl@google.com>

        Merge from cxx-conversion branch.  Re-write double_int in C++.

        * hash-table.h
        (typedef double_int): Change to struct (POD).
        (double_int::make): New overloads for int to double-int conversion.
        (double_int::mask): New.
        (double_int::max_value): New.
        (double_int::min_value): New.
        (double_int::operator ++): New.
        (double_int::operator --): New.
        (double_int::operator *=): New.
        (double_int::operator +=): New.
        (double_int::operator -=): New.
        (double_int::to_signed): New.
        (double_int::to_unsigned): New.
        (double_int::fits_unsigned): New.
        (double_int::fits_signed): New.
        (double_int::fits): New.
        (double_int::trailing_zeros): New.
        (double_int::popcount): New.
        (double_int::multiple_of): New.
        (double_int::set_bit): New.
        (double_int::mul_with_sign): New.
        (double_int::operator * (binary)): New.
        (double_int::operator + (binary)): New.
        (double_int::operator - (binary)): New.
        (double_int::operator - (unary)): New.
        (double_int::operator ~ (unary)): New.
        (double_int::operator & (binary)): New.
        (double_int::operator | (binary)): New.
        (double_int::operator ^ (binary)): New.
        (double_int::and_not): New.
        (double_int::lshift): New.
        (double_int::rshift): New.
        (double_int::alshift): New.
        (double_int::arshift): New.
        (double_int::llshift): New.
        (double_int::lrshift): New.
        (double_int::lrotate): New.
        (double_int::rrotate): New.
        (double_int::div): New.
        (double_int::sdiv): New.
        (double_int::udiv): New.
        (double_int::mod): New.
        (double_int::smod): New.
        (double_int::umod): New.
        (double_int::divmod): New.
        (double_int::sdivmod): New.
        (double_int::udivmod): New.
        (double_int::ext): New.
        (double_int::zext): New.
        (double_int::sext): New.
        (double_int::is_zero): New.
        (double_int::is_one): New.
        (double_int::is_minus_one): New.
        (double_int::is_negative): New.
        (double_int::cmp): New.
        (double_int::ucmp): New.
        (double_int::scmp): New.
        (double_int::ult): New.
        (double_int::ugt): New.
        (double_int::slt): New.
        (double_int::sgt): New.
        (double_int::max): New.
        (double_int::smax): New.
        (double_int::umax): New.
        (double_int::min): New.
        (double_int::smin): New.
        (double_int::umin): New.
        (double_int::operator ==): New.
        (double_int::operator !=): New.
        (shwi_to_double_int): Change implementation to use member function.
        (double_int_minus_one): Likewise.
        (double_int_zero): Likewise.
        (double_int_one): Likewise.
        (double_int_two): Likewise.
        (double_int_ten): Likewise.
        (uhwi_to_double_int): Likewise.
        (double_int_to_shwi): Likewise.
        (double_int_to_uhwi): Likewise.
        (double_int_fits_in_uhwi_p): Likewise.
        (double_int_fits_in_shwi_p): Likewise.
        (double_int_fits_in_hwi_p): Likewise.
        (double_int_mul): Likewise.
        (double_int_mul_with_sign): Likewise.
        (double_int_add): Likewise.
        (double_int_sub): Likewise.
        (double_int_neg): Likewise.
        (double_int_div): Likewise.
        (double_int_sdiv): Likewise.
        (double_int_udiv): Likewise.
        (double_int_mod): Likewise.
        (double_int_smod): Likewise.
        (double_int_umod): Likewise.
        (double_int_divmod): Likewise.
        (double_int_sdivmod): Likewise.
        (double_int_udivmod): Likewise.
        (double_int_multiple_of): Likewise.
        (double_int_setbit): Likewise.
        (double_int_ctz): Likewise.
        (double_int_not): Likewise.
        (double_int_ior): Likewise.
        (double_int_and): Likewise.
        (double_int_and_not): Likewise.
        (double_int_xor): Likewise.
        (double_int_lshift): Likewise.
        (double_int_rshift): Likewise.
        (double_int_lrotate): Likewise.
        (double_int_rrotate): Likewise.
        (double_int_cmp): Likewise.
        (double_int_scmp): Likewise.
        (double_int_ucmp): Likewise.
        (double_int_max): Likewise.
        (double_int_smax): Likewise.
        (double_int_umax): Likewise.
        (double_int_min): Likewise.
        (double_int_smin): Likewise.
        (double_int_umin): Likewise.
        (double_int_ext): Likewise.
        (double_int_sext): Likewise.
        (double_int_zext): Likewise.
        (double_int_mask): Likewise.
        (double_int_max_value): Likewise.
        (double_int_min_value): Likewise.
        (double_int_zero_p): Likewise.
        (double_int_one_p): Likewise.
        (double_int_minus_one_p): Likewise.
        (double_int_equal_p): Likewise.
        (double_int_popcount): Likewise.
        * hash-table.c
        (double_int_mask): Reuse implementation for double_int::mask.
        (double_int_max_value): Likewise.
        (double_int_min_value): Likewise.
        (double_int_ext): Likewise.
        (double_int_zext): Likewise.
        (double_int_sext): Likewise.
        (double_int_mul_with_sign): Likewise.
        (double_int_divmod): Likewise.
        (double_int_sdivmod): Likewise.
        (double_int_udivmod): Likewise.
        (double_int_div): Likewise.
        (double_int_sdiv): Likewise.
        (double_int_udiv): Likewise.
        (double_int_mod): Likewise.
        (double_int_smod): Likewise.
        (double_int_umod): Likewise.
        (double_int_multiple_of): Likewise.
        (double_int_lshift): Likewise.
        (double_int_rshift): Likewise.
        (double_int_lrotate): Likewise.
        (double_int_rrotate): Likewise.
        (double_int_cmp): Likewise.
        (double_int_ucmp): Likewise.
        (double_int_scmp): Likewise.
        (double_int_max): Likewise.
        (double_int_smax): Likewise.
        (double_int_umax): Likewise.
        (double_int_min): Likewise.
        (double_int_smin): Likewise.
        (double_int_umin): Likewise.
        (double_int_min): Likewise.
        (double_int_min): Likewise.
        (double_int_min): Likewise.
        (double_int_min): Likewise.
        (double_int_min): Likewise.
        (double_int_min): Likewise.
        (double_int::alshift): New.
        (double_int::arshift): New.
        (double_int::llshift): New.
        (double_int::lrshift): New.
        (double_int::ult): New.
        (double_int::ugt): New.
        (double_int::slt): New.
        (double_int::sgt): New.
        (double_int_setbit): Reuse implementation for double_int::set_bit,
        which avoids a name conflict with a macro.
        (double_int_double_int_ctz): Reuse implementation for
        double_int::trailing_zeros.
        (double_int_fits_in_shwi_p): Reuse implementation for
        double_int::fits_signed.
        (double_int_fits_in_hwi_p): Reuse implementation for double_int::fits.
        (double_int_mul): Reuse implementation for binary
        double_int::operator *.
        (double_int_add): Likewise.
        (double_int_sub): Likewise.
        (double_int_neg): Reuse implementation for unary
        double_int::operator -.
        (double_int_max_value): Likewise.
        * fixed-value.c: Change to use member functions introduced above.

2012-08-14  Lawrence Crowl  <crowl@google.com>

        Merge cxx-conversion branch.  Support tree macro calling from gdb.

        * tree.h (tree_check): New.
        (TREE_CHECK): Use inline function above instead of __extension__.
        (tree_not_check): New.
        (TREE_NOT_CHECK): Use inline function above instead of __extension__.
        (tree_check2): New.
        (TREE_CHECK2): Use inline function above instead of __extension__.
        (tree_not_check2): New.
        (TREE_NOT_CHECK2): Use inline function above instead of __extension__.
        (tree_check3): New.
        (TREE_CHECK3): Use inline function above instead of __extension__.
        (tree_not_check3): New.
        (TREE_NOT_CHECK3): Use inline function above instead of __extension__.
        (tree_check4): New.
        (TREE_CHECK4): Use inline function above instead of __extension__.
        (tree_not_check4): New.
        (TREE_NOT_CHECK4): Use inline function above instead of __extension__.
        (tree_check5): New.
        (TREE_CHECK5): Use inline function above instead of __extension__.
        (tree_not_check5): New.
        (TREE_NOT_CHECK5): Use inline function above instead of __extension__.
        (contains_struct_check): New.
        (CONTAINS_STRUCT_CHECK): Use inline function above instead of
        __extension__.
        (tree_class_check): New.
        (TREE_CLASS_CHECK): Use inline function above instead of __extension__.
        (tree_range_check): New.
        (TREE_RANGE_CHECK): Use inline function above instead of __extension__.
        (omp_clause_subcode_check): New.
        (OMP_CLAUSE_SUBCODE_CHECK): Use inline function above instead of
        __extension__.
        (omp_clause_range_check): New.
        (OMP_CLAUSE_RANGE_CHECK): Use inline function above instead of
        __extension__.
        (expr_check): New.
        (EXPR_CHECK): Use inline function above instead of __extension__.
        (non_type_check): New.
        (NON_TYPE_CHECK): Use inline function above instead of __extension__.
        (tree_vec_elt_check): New.
        (TREE_VEC_ELT_CHECK): Use inline function above instead of
        __extension__.
        (omp_clause_elt_check): New.
        (OMP_CLAUSE_ELT_CHECK): Use inline function above instead of
        __extension__.
        (tree_operand_check): New.
        (TREE_OPERAND_CHECK): Use inline function above instead of
        __extension__.
        (tree_operand_check_code): New.
        (TREE_OPERAND_CHECK_CODE): Use inline function above instead of
        __extension__.
        (TREE_CHAIN): Simplify implementation.
        (TREE_TYPE): Simplify implementation.
        (tree_operand_length): Move for compilation dependences.
        * gdbinit.in: (macro define __FILE__): New.
        (macro define __LINE__): New.
        (skip "tree.h"): New.

2012-08-14  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/52933
        * config/sh/sh.md (cmp_div0s_0, cmp_div0s_1, *cmp_div0s_0,
        *cmp_div0s_1, *cbranch_div0s, *movsicc_div0s): New insns.
        * config/sh/sh.c (sh_rtx_costs): Handle div0s patterns.

2012-08-14  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/50751
        * config/sh/constraints.md (Sra): New constraint.
        * config/sh/predicates.md (simple_mem_operand,
        displacement_mem_operand, zero_extend_movu_operand): New predicates.
        (zero_extend_operand): Check zero_extend_movu_operand for SH2A.
        * config/sh/sh.md (*zero_extendqisi2_disp_mem,
        *zero_extendhisi2_disp_mem): Add new insns and two new related
        peephole2 patterns.

2012-08-14  Steven Bosscher  <steven@gcc.gnu.org>

        * graphite-scop-detection.c (create_sese_edges): Compute dominance
        info before trying to fix loop structure.
        * cfgloopmanip.c (fix_loop_structure): Require fast DOM queries.
        * tree-cfgcleanup.c (repair_loop_structures): Likewise.
        * cfgloop.c (verify_loop_structure): Verify loop fathers.

        * dominance.c (init_dom_info): Use gcc_checking_assert, not gcc_assert.
        (dom_convert_dir_to_idx, compute_dom_fast_query,
        get_immediate_dominator, set_immediate_dominator, get_dominated_by,
        redirect_immediate_dominators, nearest_common_dominator,
        (dominated_by_p, bb_dom_dfs_in, bb_dom_dfs_out, recompute_dominator,
        iterate_fix_dominators, add_to_dominance_info,
        delete_from_dominance_info): Likewise.

2012-08-14  Richard Guenther  <rguenther@suse.de>

        * cfgexpand.c (expand_used_vars): Use virtual_operand_p.
        * gimple-pretty-print.c (dump_phi_nodes): Likewise.
        * gimple-streamer-out.c (output_bb): Likewise.
        * graphite-sese-to-poly.c (scalar_close_phi_node_p): Likewise.
        (rewrite_reductions_out_of_ssa): Likewise.
        (rewrite_commutative_reductions_out_of_ss): Likewise.
        * ipa-split.c (verify_non_ssa_vars): Likewise.
        (consider_split): Likewise.
        (visit_bb): Likewise.
        (split_function): Likewise.
        * lto-streamer-out.c (output_ssa_names): Likewise.
        * sese.c (rename_uses): Likewise.
        * tree-cfg.c (replace_uses_by): Likewise.
        (gimple_merge_blocks): Likewise.
        (gimple_cfg2dot): Likewise.
        (verify_gimple_phi): Likewise.
        (replace_ssa_name): Likewise.
        (move_block_to_fn): Likewise.
        * tree-eh.c (cleanup_empty_eh_merge_phis): Likewise.
        * tree-if-conv.c (if_convertible_phi_p): Likewise.
        (predicate_scalar_phi): Likewise.
        * tree-inline.c (update_ssa_across_abnormal_edges): Likewise.
        (copy_phis_for_bb): Likewise.
        * tree-loop-distribution.c (generate_loops_for_partition): Likewise.
        (destroy_loop): Likewise.
        * tree-outof-ssa.c (eliminate_useless_phis): Likewise.
        (insert_backedge_copies): Likewise.
        * tree-parloops.c (transform_to_exit_first_loop): Likewise.
        (gather_scalar_reductions): Likewise.
        (try_create_reduction_list): Likewise.
        * tree-scalar-evolution.c (analyze_scalar_evolution_for_all_loop_ph):
        Likewise.
        (scev_const_prop): Likewise.
        * tree-ssa-ccp.c (debug_lattice_value): Likewise.
        (get_default_value): Likewise.
        (ccp_initialize): Likewise.
        * tree-ssa-coalesce.c (create_outofssa_var_map): Likewise.
        * tree-ssa-copy.c (may_propagate_copy): Likewise.
        (init_copy_prop): Likewise.
        * tree-ssa-dce.c (propagate_necessity): Likewise.
        (remove_dead_phis): Likewise.
        (forward_edge_to_pdom): Likewise.
        (eliminate_unnecessary_stmts): Likewise.
        * tree-ssa-live.c (partition_view_init): Likewise.
        (remove_unused_locals): Likewise.
        (register_ssa_partition_check): Likewise.
        * tree-ssa-loop-im.c (movement_possibility): Likewise.
        (move_computations_stmt): Likewise.
        * tree-ssa-loop-ivopts.c (determine_biv_step): Likewise.
        (record_invariant): Likewise.
        (find_interesting_uses_outside): Likewise.
        (determine_set_costs): Likewise.
        * tree-ssa-loop-manip.c (add_exit_phis_var): Likewise.
        (find_uses_to_rename_use): Likewise.
        (check_loop_closed_ssa_use): Likewise.
        (rewrite_phi_with_iv): Likewise.
        (canonicalize_loop_ivs): Likewise.
        * tree-ssa-math-opts.c (execute_cse_reciprocals): Likewise.
        * tree-ssa-phiopt.c (hoist_adjacent_loads): Likewise.
        * tree-ssa-pre.c (make_values_for_phi): Likewise.
        (compute_avail): Likewise.
        (eliminate): Likewise.
        * tree-ssa-propagate.c (substitute_and_fold): Likewise.
        * tree-ssa-reassoc.c (phi_rank): Likewise.
        * tree-ssa-strlen.c (strlen_enter_block): Likewise.
        * tree-ssa-structalias.c (compute_points_to_sets): Likewise.
        (ipa_pta_execute): Likewise.
        * tree-ssa-tail-merge.c (same_succ_hash): Likewise.
        (release_last_vdef): Likewise.
        (same_phi_alternatives_1): Likewise.
        (bb_has_non_vop_phi): Likewise.
        (vop_phi): Likewise.
        * tree-ssa-threadedge.c (record_temporary_equivalences_from_phis):
        Likewise.
        * tree-ssa-uninit.c (warn_uninitialized_phi): Likewise.
        (execute_late_warn_uninitialized): Likewise.
        * tree-ssa.c (verify_ssa_name): Likewise.
        (verify_phi_args): Likewise.
        (verify_ssa): Likewise.
        * tree-stdarg.c (execute_optimize_stdarg): Likewise.
        * tree-vect-loop-manip.c (slpeel_update_phi_nodes_for_guard1):
        Likewise.
        (slpeel_tree_peel_loop_to_edge): Likewise.
        (vect_can_advance_ivs_p): Likewise.
        (vect_update_ivs_after_vectorizer): Likewise.
        * tree-vect-loop.c (vect_analyze_scalar_cycles_1): Likewise.
        * tree-vrp.c (remove_range_assertions): Likewise.
        * value-prof.c (gimple_divmod_values_to_profile): Likewise.

2012-08-14  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/54146
        * tree-ssa-pre.c (do_regular_insertion): Use a VEC
        indexed by pred edge index for avail.
        (do_partial_partial_insertion): Likewise.
        (insert_into_preds_of_block): Adjust.

2012-08-14  Richard Guenther  <rguenther@suse.de>

        * gimplify.c (create_tmp_from_val): Mark temporary with
        DECL_GIMPLE_REG_P here ...
        (internal_get_tmp_var): ... instead of here.  If we go into
        SSA create an SSA name instead of a VAR_DECL.
        (gimplify_modify_expr): Do not create SSA names here, assert
        we already got them.
        (force_gimple_operand_1): Create an SSA name if we go into SSA.
        * sese.c (rename_uses): Simplify.

2012-08-14  Richard Guenther  <rguenther@suse.de>

        * tree-into-ssa.c: Include diagnostic-core.h.
        * Makefile.in (tree-into-ssa.o): Adjust.

2012-08-14  Richard Guenther  <rguenther@suse.de>

        * tree-into-ssa.c (update_ssa): Verify we do not rename
        symbols that are already partly in SSA form.

2012-08-14  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/53411
        PR rtl-optimization/53495
        * ira.c (ira): Move delete_trivially_dead_insns call before
        find_moveable_pseudos call.

2012-08-13  Steven Bosscher  <steven@gcc.gnu.org>

        * tree-ssa-pre.c (do_regular_insertion): Add FIXME markers at points
        of potentially huge memset overhead.
        (do_partial_partial_insertion): Likewise.
        * cfgexpand.c (gimple_expand_cfg): Use XCNEWVEC instead of xcalloc.
        * tree-vrp.c (find_assert_locations): Use XNEWVEC instead of XCNEWVEC
        for arrays to be filled by pre_and_rev_post_order_compute.  Allocate
        the right number of slots, not that number plus NUM_FIXED_BLOCKS.
        * tree-ssa-reassoc.c (init_reassoc): Likewise.
        * cfganal.c (dfs_enumerate_from): Use XNEWVEC instead of XCNEWVEC for
        array used as stack.
        * tree-ssa-sccvn.c (init_scc_vn): Use XNEWVEC instead of XCNEWVEC for
        arrays to be filled by pre_and_rev_post_order_compute.
        * cfgloopmanip.c (find_path): Use XNEWVEC instead of XCNEWVEC for
        array to be filled by dfs_enumerate_from.
        (remove_path): Likewise.
        (duplicate_loop_to_header_edge): Use XNEWVEC instead of XCNEWVEC for
        array of loops that is filled on the next lines.
        * cfgloop.c (get_loop_body): Use XNEWVEC instead of XCNEWVEC for
        array of basic blocks to be returned.
        (get_loop_body_in_dom_order): Likewise.
        (get_loop_body_in_bfs_order): Likewise.
        * tree-ssa-loop-manip.c (loop_renamer_obstack): New static obstack
        for all bitmaps used for rewriting into loop-closed SSA form.
        (add_exit_phis_var): Allocate the def bitmap on it.  Clear the livein
        bitmap at the end to release a lot of memory.
        (add_exit_phis): Allocate the exits bitmap on the new obstack.
        (get_loops_exits): Allocate the exits bitmap on the new obstack.
        (find_uses_to_rename_use): Allocate a use_blocks bitmap if ver is
        seen for the first time.
        (find_uses_to_rename): Add "???" for why the whole function must
        be re-scanned if changed_bbs is empty.
        (rewrite_into_loop_closed_ssa): Allocate bitmaps on the new obstack.
        Use XNEWVEC to allocate the use_blocks array.  Initialize the new
        obstack, and free it at the end.  Remove loop over all SSA names.
        (check_loop_closed_ssa_stmt): Look only at SSA_OP_USE operands.
        * tree-cfg.c (move_sese_region_to_fn): Use XNEWVEC instead of
        xcalloc to allocate edge_pred and edge_flag arrays.

2012-08-13  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.h (FIXED_REGISTERS): Do not mark REX registers here.
        (CALL_USED_REGISTERS): Use bitmaps to mark call-used registers
        for different ABIs.
        (enum reg_class): Move CLOBBERED_REGS just before GENERAL_REGS.
        (REG_CLASS_NAMES): Update.
        (REG_CLASS_CONTENTS): Update.  Clear CLOBBERED_REGS members.
        * config/i386/i386.c (ix86_conditional_register_usage): Disable
        REX registers on 32bit targets.  Handle bitmaps from
        CALL_USED_REGISTERS initializer.  Calculate CLOBBERED_REGS register
        set from GENERAL_REGS also for 32bit targets.  Do not change call
        used register set for TARGET_64BIT_MS_ABI separately.

2012-08-13  Richard Guenther  <rguenther@suse.de>

        * basic-block.h (struct basic_block): Remove loop_depth
        member, move flags and index members next to each other.
        * cfgloop.h (bb_loop_depth): New inline function.
        * cfghooks.c (split_block): Do not set loop_depth.
        (duplicate_block): Likewise.
        * cfgloop.c (flow_loop_nodes_find): Likewise.
        (flow_loops_find): Likewise.
        (add_bb_to_loop): Likewise.
        (remove_bb_from_loops): Likewise.
        * cfgrtl.c (force_nonfallthru_and_redirect): Likewise.
        * gimple-streamer-in.c (input_bb): Do not stream loop_depth.
        * gimple-streamer-out.c (output_bb): Likewise.
        * bt-load.c: Include cfgloop.h.
        (migrate_btr_defs): Use bb_loop_depth.
        * cfg.c (dump_bb_info): Likewise.
        * final.c (compute_alignments): Likewise.
        * ira.c (update_equiv_regs): Likewise.
        * tree-ssa-copy.c (init_copy_prop): Likewise.
        * tree-ssa-dom.c (loop_depth_of_name): Likewise.
        * tree-ssa-forwprop.c: Include cfgloop.h.
        (forward_propagate_addr_expr): Use bb_loop_depth.
        * tree-ssa-pre.c (insert_into_preds_of_block): Likewise.
        * tree-ssa-sink.c (select_best_block): Likewise.
        * ipa-inline-analysis.c: Include cfgloop.h.
        (estimate_function_body_sizes): Use bb_loop_depth.
        * Makefile.in (tree-ssa-forwprop.o): Depend on $(CFGLOOP_H).
        (ipa-inline-analysis.o): Likewise.
        (bt-load.o): Likewise.

2012-08-13  Ganesh Gopalasubramanian  <Ganesh.Gopalasubramanian@amd.com>
            Jakub Jelinek  <jakub@redhat.com>

        PR driver/54210
        * config/i386/driver-i386.c (host_detect_local_cpu): Test bit_PRFCHW
        bit of CPUID 0x80000001 %ecx instead of CPUID 7 %ecx.
        * config/i386/cpuid.h (bits_PRFCHW): Move definition to CPUID
        0x80000001 %ecx flags.

2012-08-13  Richard Guenther  <rguenther@suse.de>

        * tree-cfg.c (print_loop): Avoid ICEing for loops marked for
        removal and loops with multiple latches.

2012-08-13  Jakub Jelinek  <jakub@redhat.com>

        PR c/53968
        * tree.c (integer_pow2p): Avoid undefined signed overflows.
        * simplify-rtx.c (neg_const_int): Likewise.
        * expr.c (fixup_args_size_notes): Likewise.
        * stor-layout.c (set_min_and_max_values_for_integral_type): Likewise.
        * double-int.c (mul_double_wide_with_sign): Likewise.
        (double_int_mask): Likewise.
        * tree-ssa-loop-ivopts.c (get_address_cost): Likewise.

2012-08-13  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/54200
        * tree-ssa-copyrename.c (rename_ssa_copies): Do not add
        PHI results to another partition if not all PHI arguments
        have the same partition.

2012-08-12  Jan Hubicka  <jh@suse.cz>

        * tree-pass.h (write_summary, write_optimization_summary): Remove
        set and vset arguments.
        * ipa-cp.c (ipcp_write_summary): Remove set and vset arugments.
        (write_node_summary_p): Likewise; use the encoder.
        (ipa_reference_write_optimization_summary): Likewise.
        * lto-cgraph.c (output_cgraph_opt_summary): Use encoder.
        (lto_symtab_encoder_new): Initialize in_partition field.
        (lto_symtab_encoder_delete): Destroy in_partition field.
        (LCC_NOT_FOUND): Move to lto-streamer.h
        (lto_symtab_encoder_deref): Likewise.
        (lto_symtab_encoder_in_partition_p,
        lto_set_symtab_encoder_in_partition): New functions.
        (referenced_from_other_partition_p): Rewrite to use encoder.
        (reachable_from_other_partition_p): Likewise.
        (referenced_from_this_partition_p): Likewise.
        (reachable_from_this_partition_p): Likewise.
        (lto_output_node): Likewise.
        (lto_output_varpool_node): Likewise.
        (output_refs): Likewise.
        (compute_ltrans_boundary): Initialize in_partition fileds of
        the encoder.
        (output_symtab): Likewise.
        (input_refs): Match the changes in output_refs.
        (output_cgraph_opt_summary_p): Remove set argument.
        (output_node_opt_summary): Replace set by encoder.
        (output_cgraph_opt_summary): Remove set argument; use
        the encoder.
        * ipa-pure-const.c (pure_const_write_summary): Remove set and vset
        arguments; use the encoder.
        * lto-streamer-out.c (lto_output): Remove set and vset argument; use
        the encoder.
        (produce_symtab): Likewise.
        * ipa-inline.h (inline_write_summary): Remove set and vset arguments.
        * ipa-inline-analysis.c (inline_write_summary): Likewise.
        * ipa-prop.c (ipa_prop_write_jump_functions): Remove set argument;
        use encoder.
        * ipa-prop.h (ipa_prop_write_jump_functions): Likewise.
        * passes.c (ipa_write_summaries_2): Remove set and vset arguments.
        (ipa_write_summaries_1): Update.
        (ipa_write_optimization_summaries_1): Likewise.
        (ipa_write_optimization_summaries): Likewise.
        * lto-streamer.h (lto_symtab_encoder_t): Add in_partition.
        (lto_symtab_encoder_iterator): New type.
        (lto_symtab_encoder_deref): Make inline.
        (output_symtab, referenced_from_other_partition_p,
        reachable_from_other_partition_p, referenced_from_this_partition_p,
        reachable_from_this_partition_p): Update.
        (lsei_end_p, lsei_next, lsei_node, lsei_cgraph_node,
        lsei_varpool_node): New inline functions.
        (LCC_NOT_FOUND): New macro.
        (lto_symtab_encoder_deref, lsei_start, lsei_next_in_partition,
        lsei_start_in_partition, lsei_next_function_in_partition,
        lsei_start_function_in_partition, lsei_next_variable_in_partition,
        lsei_start_variable_in_partition): New inline functions.

2012-08-12  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.md (prefetch): Simplify expander.  Fix condition to
        allow SH3.
        (*prefetch_media): Move insn below expander.
        (*prefetch): Fix condition to allow SH3.

2012-08-12  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/51244
        * config/sh/sh.md: Add splits for inverted compare and branch
        opportunities.
        (*cmpeqsi_t): New insn.
        (cmpgtsi_t, cmpgesi_t): Swap r and N alternatives.
        (cmpgeusi_t): Use satisfies_constraint_Z.  Emit sett insn in
        replacement insn list and not in the preparation statements.
        (clrt, sett): Add mt_group attribute.

2012-08-12 Marc Glisse <marc.glisse@inria.fr>

        PR middle-end/54193
        * gimple-pretty-print.c (dump_ternary_rhs): Handle 4 arguments.

2012-08-12  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/39423
        * config/sh/predicates.md (mem_index_disp_operand): Check for
        arith_reg_operand instead of REG_P.

2012-08-11  Bernd Schmidt  <bernds@codesourcery.com>

        * reload1.c (replaced_subreg, gen_reload): Add
        SECONDARY_MEMORY_NEEDED ifdefs as necessary.

2012-08-11  Jan Hubicka  <jh@suse.cz>

        * lto-section-in.c (lto_section_name): Do not use "symtab" as part of
        symtab_node sectoin name; it confuses plugin.

2012-08-11  Uros Bizjak  <ubizjak@gmail.com>

        * config/alpha/alpha.c (alpha_stdarg_optimize_hook): Shift DECL_UID
        index in the va_list_vars bitmap by num_ssa_names.

2012-08-11  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/sse.md (xop integer multiply/add insns): Use
        register_operand for operand 3 predicate.
        (xop_phadd<u>bq):  Fix vec_select selectors.

2012-08-11  Martin Jambor  <mjambor@suse.cz>

        PR fortran/48636
        * ipa-inline.h (condition): New fields offset, agg_contents and by_ref.
        * ipa-inline-analysis.c (agg_position_info): New type.
        (add_condition): New parameter aggpos, also store agg_contents, by_ref
        and offset.
        (dump_condition): Also dump aggregate conditions.
        (evaluate_conditions_for_known_args): Also handle aggregate
        conditions.  New parameter known_aggs.
        (evaluate_properties_for_edge): Gather known aggregate contents.
        (inline_node_duplication_hook): Pass NULL known_aggs to
        evaluate_conditions_for_known_args.
        (unmodified_parm): Split into unmodified_parm and unmodified_parm_1.
        (unmodified_parm_or_parm_agg_item): New function.
        (set_cond_stmt_execution_predicate): Handle values passed in
        aggregates.
        (set_switch_stmt_execution_predicate): Likewise.
        (will_be_nonconstant_predicate): Likewise.
        (estimate_edge_devirt_benefit): Pass new parameter known_aggs to
        ipa_get_indirect_edge_target.
        (estimate_calls_size_and_time): New parameter known_aggs, pass it
        recrsively to itself and to estimate_edge_devirt_benefit.
        (estimate_node_size_and_time): New vector known_aggs, pass it o
        functions which need it.
        (remap_predicate): New parameter offset_map, use it to remap aggregate
        conditions.
        (remap_edge_summaries): New parameter offset_map, pass it recursively
        to itself and to remap_predicate.
        (inline_merge_summary): Also create and populate vector offset_map.
        (do_estimate_edge_time): New vector of known aggregate contents,
        passed to functions which need it.
        (inline_read_section): Stream new fields of condition.
        (inline_write_summary): Likewise.
        * ipa-cp.c (ipa_get_indirect_edge_target): Also examine the aggregate
        contents.  Let all local callers pass NULL for known_aggs.

2012-08-11  Jan Hubicka  <jh@suse.cz>

        * lto-cgraph.c (output_cgraph): Rename to ...
        (output_symtab): ... this one. Update for LTO_section_symtab_nodes.
        (input_cgraph): Rename to ...
        (input_symtab): ... this one. Update for LTO_section_symtab_nodes.
        * lto-streamer-out.c (create_output_block): Do not set
        section_type.
        (produce_asm): Likewise.
        (lto_output_toplevel_asms): Likewise.
        (produce_asm_for_decls): Likewise.
        (lto_output): Use output_symtab.
        * lto-section-in.c (lto_section_name): Update.
        * lto-section-out.c (lto_destroy_simple_output_block): Remove
        section_type.
        * lto-streamer.h (enum lto_section_type): Remove LTO_section_varpool;
        rename LTO_section_cgraph to LTO_section_symtab_nodes.
        (struct lto_header): Remove section_type.

2012-08-11  Jan Hubicka  <jh@suse.cz>

        * cgraph.h (vector types for symtab_node): Add.
        * ipa-reference.c (ipa_reference_write_optimization_summary): Update
        for new symtab encoder.
        (ipa_reference_read_optimization_summary): Likewise.
        * lto-cgraph.c (output_varpool): Remove.
        (input_cgraph_opt_summary): Take symtab nodes vector as argument.
        (LTO_cgraph_tags): Rename to ...
        (LTO_symtab_tags): ... this one; add LTO_symtab_variable.
        (lto_cgraph_encoder_new): Rename to ...
        (lto_symtab_encoder_new): ... this on.
        (lto_cgraph_encoder_encode): Rename to ...
        (lto_symtab_encoder_encode): ... this one.
        (lto_cgraph_encoder_delete): Rename to ...
        (lto_symtab_encoder_delete): ... this one.
        (lto_cgraph_encoder_deref): Rename to ...
        (lto_symtab_encoder_deref): ... this one.
        (lto_cgraph_encoder_encode_body_p): Rename to ...
        (lto_symtab_encoder_encode_body_p): ... this one.
        (lto_varpool_encoder_new, lto_varpool_encoder_delete,
        lto_varpool_encoder_encode, lto_varpool_encoder_lookup,
        lto_varpool_encoder_deref): Remove.
        (lto_varpool_encoder_encode_initializer_p): Rename to ...
        (lto_symtab_encoder_encode_initializer_p): ... this one.
        (lto_set_varpool_encoder_encode_initializer): Rename to ...
        (lto_set_symtab_encoder_encode_initializer): ... this one.
        (lto_output_edge): Update.
        (lto_output_node): Update.
        (lto_output_varpool_node): Update; stream out LTO_symtab_variable tag.
        (lto_output_ref): Drop varpool_encoder; update.
        (add_node_to): Update.
        (add_references): Update.
        (output_outgoing_cgraph_edges): Update.
        (output_refs): Update.
        (compute_ltrans_boundary): Update.
        (output_cgraph): Update; output varpools too.
        (input_overwrite_node): Update.
        (output_varpool): Remove.
        (input_node): Update.
        (input_ref): Update.
        (input_edge): Update.
        (input_cgraph_1): Update; input varpool too; unify fixup code.
        (input_varpool_1): Remove.
        (input_refs): Update.
        (input_cgraph): Update.
        (output_node_opt_summary): Update.
        (input_cgraph_opt_section): Update.
        (input_cgraph_opt_summary): Update.
        * ipa-pure-const.c (pure_const_write_summary): Update.
        (pure_const_read_summary): Update.
        * lto-streamer-out.c (lto_write_tree): Update.
        (lto_output): Likewise.
        (produce_symtab): Update.
        (produce_asm_for_decls): Update.
        * ipa-inline-analysis.c (inline_read_section): Update.
        (inline_write_summary): Update.
        * ipa-prop.c (ipa_write_node_info): Update.
        (ipa_prop_read_section): Update.
        * lto-streamer.h (lto_cgraph_encoder_d): Rename to ...
        (lto_symtab_encoder_d): ... this one;  add initializer.
        (lto_cgraph_encoder_t): Rename to ...
        (lto_symtab_encoder_t): ... this one.
        (lto_cgraph_encoder_size): Rename to ...
        (lto_symtab_encoder_size): ... this one.
        (lto_varpool_encoder_d): ... remove.
        (lto_varpool_encoder_t): Remove.
        (lto_out_decl_state): Remove cgraph_node_encoder, varpool_node_encoder
        add symtab_node_encoder.
        (lto_file_decl_data): Likewise.
        (lto_cgraph_encoder_deref, lto_cgraph_encoder_lookup,
        lto_cgraph_encoder_new, lto_cgraph_encoder_encode,
        lto_cgraph_encoder_delete, lto_cgraph_encoder_encode_body_p,
        lto_varpool_encoder_encode_body_p, lto_varpool_encoder_deref,
        lto_varpool_encoder_lookup, lto_varpool_encoder_new,
        lto_varpool_encoder_encode, lto_varpool_encoder_delete,
        lto_varpool_encoder_encode_initializer_p): Remove.
        (lto_symtab_encoder_deref, lto_symtab_encoder_lookup,
        lto_symtab_encoder_t, lto_symtab_encoder_encode,
        lto_symtab_encoder_delete, lto_symtab_encoder_encode_body_p,
        lto_symtab_encoder_encode_initializer_p): New.

2012-08-11  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (isa): Add fma and fma4.
        (enabled): Handle fma and fma4.
        * config/i386/sse.md (*fma_fmadd_<mode>): Merge *fma4_fmadd_<mode>.
        (*fma_fmsub_<mode>): Merge *fma4_fmsub_<mode>.
        (*fma_fnmadd_<mode>): Merge *fma4_fnmadd_<mode>.
        (*fma_fnmsub_<mode>): Merge *fma4_fnmsub_<mode>.
        (*fma_fmaddsub_<mode>): Merge *fma4_fmaddsub_<mode>.
        (*fma_fmsubadd_<mode>): Merge *fma4_fmsubadd_<mode>.

2012-08-10  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/sse.md (*fma_fmadd_<mode>, *fma_fmsub_<mode>,
        *fma_fnmadd_<mode>, *fma_fnmsub_<mode>, *fma_fmaddsub_<mode>,
        *fma_fmsubadd_<mode>): Move FMA3 insn patterns before FMA4 patterns.

2012-08-10  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (simple LEA peephole2s): Add zero-extend
        variants of PLUS and MULT simple LEA patterns.  Disable PLUS
        patterns for TARGET_OPT_AGU.

2012-08-10  Richard Guenther  <rguenther@suse.de>

        * Makefile.in (OBJS): Remove matrix-reorg.o.
        (matrix-reorg.o): Remove dependence rule.
        (GTFILES): Remove matrix-reorg.c.
        * matrix-reorg.c: Remove.
        * passes.c (init_optimization_passes): Do not schedule
        pass_ipa_matrix_reorg.
        * tree-pass.h (pass_ipa_matrix_reorg): Remove.
        * common.opt (fipa-matrix-reorg): Stub out.
        * doc/invoke.texi (fipa-matrix-reorg): Remove documentation.

2012-08-10  Richard Guenther  <rguenther@suse.de>

        PR middle-end/54219
        * fold-const.c (fold_ternary_loc): Do not reverse the mask
        when canonicalizing it when folding VEC_PERM_EXPR.

2012-08-10  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

        PR middle-end/54211
        * gimple-ssa-strength-reduction.c (analyze_candidates_and_replace):
        Use cand_type to determine whether pointer arithmetic will be generated.

2012-08-10  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

        * doc/sourcebuild.texi: Document long_neq_int effective target.

2012-08-10  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/54109
        * tree-ssa-forwprop.c
        (forward_propagate_addr_into_variable_array_index): Remove.
        (forward_propagate_addr_expr_1): Adjust.

2012-08-10  Richard Guenther  <rguenther@suse.de>

        * tree-cfg.c (dump_function_to_file): Make sure to dump
        anonymous SSA names when there are no local decls.

2012-08-10  Steven Bosscher  <steven@gcc.gnu.org>

        * tree-ssa-pre.c (alloc_expression_id): Fix use of VEC_reserve.
        * tree-into-ssa.c (get_ssa_name_ann): Likewise.
        (mark_phi_for_rewrite): Likewise.
        (compute_global_livein): Use VEC_reserve outside the innermost
        loop and VEC_quick_push instead of VEC_safe_push in that loop.
        (update_ssa): Re-organize to avoid unnecessary sbitmap_zero'ing
        of new_ssa_names and old_ssa_names.  Allocate phis_to_rewrite to
        the correct initial size.

2012-08-10  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-pre.c (pretemp, storetemp, prephitemp): Remove.
        (need_creation): Remove.
        (get_representative_for): Use anonymous named SSA names.
        (create_expression_by_pieces): Likewise.
        (insert_into_preds_of_block): Likewise.
        (init_pre): Do not init removed vars.
        (fini_pre): Do not free need_creation.
        * tree-ssa-forwprop.c (simplify_bitwise_binary): Use anonymous
        SSA names.
        * tree-ssa-loop-manip.c (create_iv): Likewise.
        * value-prof.c (gimple_divmod_fixed_value): Likewise.
        (gimple_mod_pow2): Likewise.
        (gimple_mod_subtract): Likewise.
        (gimple_ic): Likewise.
        (gimple_stringop_fixed_value): Likewise.
        * tree-ssa-phiopt.c (condstoretemp): Remove.
        (tree_ssa_phiopt_worker): Use anonymous named SSA names.
        (conditional_replacement): Likewise.
        (abs_replacement): Likewise.
        (cond_store_replacement): Likewise.
        (cond_if_else_store_replacement_1): Likewise.
        * tree-ssa-loop-im.c (rewrite_reciprocal): Likewise.
        (rewrite_bittest): Likewise.
        * tree-ssa-reassoc.c (build_and_add_sum): Get type from callers
        and build anonymous SSA names.
        (undistribute_ops_list): Adjust.
        (eliminate_redundant_comparison): Use anonymous SSA names.
        (rewrite_expr_tree_parallel): Likewise.
        (get_reassoc_pow_ssa_name): Remove.
        (attempt_builtin_powi): Adjust.
        (reassociate_bb): Likewise.
        * tree-ssa-strlen.c (get_string_length): Use anonymous SSA names.
        * tree-switch-conversion.c (emit_case_bit_tests): Likewise.
        (build_arrays): Likewise.
        * tree-tailcall.c (adjust_return_value_with_ops): Likewise.
        (create_tailcall_accumulator): Likewise.
        * tree-vect-generic.c (expand_vector_divmod): Likewise.
        * tree-profile.c (gcov_type_tmp_var): Remove.
        (gimple_init_edge_profiler): Do not initialize it and use anonymous
        SSA names.
        (gimple_gen_ic_profiler): Likewise.
        (tree_profiling): Adjust.
        * tree-sra.c (build_ref_for_offset): Use anonymous SSA names.
        * tree-ssa-math-opts.c (execute_cse_sincos_1): Likewise.
        (powi_as_mults_1): Likewise.
        (powi_as_mults): Likewise.
        (build_and_insert_call): Adjust.
        (build_and_insert_binop): Likewise.
        (build_and_insert_ref): Likewise.
        (build_and_insert_cast): Likewise.
        (gimple_expand_builtin_pow): Likewise.
        (gimple_expand_builtin_cabs): Likewise.
        (execute_optimize_bswap): Use anonymous SSA names.
        (convert_mult_to_widen): Likewise.
        (convert_plusminus_to_widen): Likewise.
        * tree-ssa-phiprop.c (phiprop_insert_phi): Likewise.
        * tree-ssa-propagate.c (update_call_from_tree): Likewise.
        * tree-if-conv.c (ifc_temp_var): Likewise.
        * tree-loop-distribution.c (generate_memset_builtin): Likewise.
        * tree-parloops.c (take_address_of): Likewise.
        * tree-vect-data-refs.c (vect_permute_store_chain): Likewise.
        (vect_permute_load_chain): Likewise.
        * tree-vect-loop-manip.c (vect_create_cond_for_align_checks): Likewise.
        * tree-vect-patterns.c (vect_recog_temp_ssa_var): Likewise.
        (vect_handle_widen_op_by_const): Likewise.
        (vect_operation_fits_smaller_type): Likewise.
        (vect_recog_over_widening_pattern): Likewise.
        * tree-vect-stmts.c (vect_init_vector): Likewise.
        * tree-vrp.c (simplify_truth_ops_using_ranges): Likewise.
        (simplify_float_conversion_using_ranges): Likewise.

2012-08-10  Michael Zolotukhin  <michael.v.zolotukhin@intel.com>

        * config/i386/i386.c (ix86_init_mmx_sse_builtins): Fix
        target mask of __builtin_ia32_rdseed_di_step builtin.

2012-08-10  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/54027
        * tree-vrp.c (extract_range_from_binary_expr_1): Merge RSHIFT_EXPR
        and LSHIFT_EXPR handling, force -fwrapv for the multiplication used
        to handle LSHIFT_EXPR with a constant.

2012-08-10  Richard Guenther  <rguenther@suse.de>

        * tree.h (SSA_NAME_VAR): Return NULL_TREE if an IDENTIFIER_NODE
        is recorded as var.
        (SSA_NAME_IDENTIFIER): Return the IDENTIFIER_NODE of the SSA_NAME
        or its SSA_NAME_VAR.
        (SET_SSA_NAME_VAR_OR_IDENTIFIER): New setter.
        * tree-ssanames.c (make_ssa_name_fn): Handle creating anonymous
        SSA names by passing a type instead of a variable decl.
        (release_ssa_name): Use SET_SSA_NAME_VAR_OR_IDENTIFIER.
        (copy_ssa_name_fn): Handle anonymous SSA names.
        (replace_ssa_name_symbol): Use SET_SSA_NAME_VAR_OR_IDENTIFIER.
        * tree-flow-inline.h (make_temp_ssa_name): New inline function.
        * tree-pretty-print.c (dump_generic_node): Use SSA_NAME_IDENTIFIER,
        dump SSA names without a name as <anon>.
        * cfgexpand.c (expand_used_vars): Assing anonymous SSA names we are
        going to expand a decl.
        (gimple_expand_cfg): Assign all SSA names of a partition the
        decl we created for its leader.
        * tree-ssa.c (target_for_debug_bind): Handle SSA_NAMEs.
        (verify_ssa_name): Handle anonymous SSA names.
        (verify_def): Likewise.
        * tree-predcom.c (eliminate_temp_copies): Likewise.
        * tree-ssa-copyrename.c (copy_rename_partition_coalesce): Likewise.
        * tree-ssa-live.c (var_map_base_init): Compute conflicts for
        anonymous SSA names with the same type.
        (mark_all_vars_used_1): Handle anonymous SSA names.
        (verify_live_on_entry): Likewise.
        * tree-ssa-coalesce.c (abnormal_corrupt): Remove.
        (create_outofssa_var_map): Adjust with respect to conflicts we
        compute for anonymous SSA names.  Do not restrict abnormal
        coalescing.
        (coalesce_partitions): Do not restrict abnormal coalescing.
        Assert we only ever coalesce variables we computed conflicts for.
        * tree-ssa-ter.c (process_replaceable): Do not restrict TER
        of anonymous names.
        * expr.c (expand_expr_real_1): Handle anonymous SSA names
        expanded from IVOPTs by creating a raw REG here.
        * tree-cfg.c (replace_ssa_name): Handle anonymous SSA names.
        (dump_function_to_file): Dump anonymous SSA names alongside
        with their types in the variable list.
        (verify_gimple_return): Guard use of SSA_NAME_VAR.
        * tree-into-ssa.c (mark_for_renaming): Handle a NULL symbol.
        (rewrite_into_ssa): Make SSA names anonymous.
        * tree-ssa-structalias.c (alias_get_name): Rewrite.
        * tree-ssa-uninit.c (ssa_undefined_value_p): Handle anonymous
        SSA names.
        (warn_uninitialized_phi): Likewise.
        * tree-ssa-loop-ivopts.c (prepare_decl_rtl): Defer expanding
        anonymous SSA names to the expander.
        (determine_iv_cost): Anonymous SSA names are artificial.
        * tree-ssa-loop-manip.c (tree_transform_and_unroll_loop):
        Handle anonymous SSA names.
        * lto-streamer-out.c (output_ssa_names): Stream SSA_NAME_VAR
        or if NULL, the type of the SSA name.
        * tree-inline.c (remap_ssa_name): Handle anonymous SSA names,
        remap names as anonymous where appropriate.
        (insert_init_stmt): Pass SSA names down to insert_init_debug_bind.
        * tree-ssa-uncprop.c (uncprop_into_successor_phis): Adjust
        according to what we create conflicts for in out-of-SSA
        coalescing.
        * tree-parloops.c (separate_decls_in_region_name): Handle
        anonymous SSA names.
        (add_field_for_name): Likewise.
        * tree.c (get_name): Handle SSA names.
        * tree-ssa-loop-im.c (gen_lsm_tmp_name): Defer to get_name for
        SSA_NAMEs.
        * tree-vect-loop-manip.c (adjust_debug_stmts): Use
        virtual_operand_p.
        * tree-sra.c (create_access_replacement): Give up generating
        a DECL_DEBUG_EXPR for SSA names in the memory reference.
        (replace_removed_params_ssa_names): Guard use of SSA_NAME_VAR.
        * tree-complex.c (get_component_ssa_name): Handle anonymous
        SSA names.
        (set_component_ssa_name): Likewise.
        * tree-ssa-sccvn.c (visit_reference_op_load): Likewise.
        * tree-object-size.c (collect_object_sizes_for): Handle
        uninitialized SSA names properly.
        * ipa-inline-analysis.c (eliminated_by_inlining_prob): Guard use of
        SSA_NAME_VAR.
        * ipa-split.c (test_nonssa_use): Likewise.
        (consider_split): Likewise.
        (mark_nonssa_use): Likewise.

2012-08-09  Jan Hubicka  <jh@suse.cz>

        PR middle-end/54146
        * ipa-inline-transform.c (inline_call): Add UPDATE_OVERALL_SUMMARY
        parameter; honnor it.
        * ipa-inline.c (recursive_inlining): Update call
        of inline_call.
        (inline_small_functions): Likewise.
        (ipa_inline): Likewise.
        (inline_always_inline_functions): Likewise.
        (early_inline_small_functions): Likewise.
        (flatten_function): Do separate update of summary info.
        * ipa-inline.h (inline_update_overall_summary): Declare.
        (inline_call): Update.
        * ipa-inline-analysis.c (inline_merge_summary): Break out
        updating code to ...
        (inline_update_overall_summary): Likewise.

2012-08-09  Richard Henderson  <rth@redhat.com>

        * config/s390/s390.c (s390_expand_insv): Use VOIDmode in gen_rtx_SET.

        * config/s390/s390.c (s390_expand_cs_hqi): Copy val to a temp before
        performing the compare for the restart loop.

2012-08-09  DJ Delorie  <dj@redhat.com>

        * config/rl78/rl78.c (rl78_alloc_physical_registers): Check for
        SET before extracting SET_SRC.
        (rl78_remove_unused_sets): Check for REG before extractnig REGNO.

2012-08-09  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54089
        * config/sh/sh-protos (shift_insns_rtx): Delete.
        (sh_ashlsi_clobbers_t_reg_p): Add.
        * config/sh/sh.c (shift_insns, shift_amounts, ext_shift_insns,
        ext_shift_amounts): Merge arrays of ints to array of structs.
        Adapt usage of arrays throughout the file.
        (shift_insns_rtx): Delete unused function.
        (sh_ashlsi_clobbers_t_reg_p): New function.
        * config/sh/sh.md (ashlsi3): Emit ashlsi3_n_clobbers_t insn if the
        final shift sequence will clobber T_REG.
        (ashlsi3_n): Split only if the final shift sequence will not
        clobber T_REG.
        (ashlsi3_n_clobbers_t): New insn_and_split.

2012-08-09  Steven Bosscher  <steven@gcc.gnu.org>

        * calls.c (mem_overlaps_already_clobbered_arg_p): Use SBITMAP_SIZE
        instead of looking at sbitmap n_bits member directly.
        * gcse.c (hoist_code): Likewise.
        * sched-rgn.c (split_edges): Likewise.
        * tree-into-ssa.c (is_old_name, is_new_name, add_new_name_mapping,
        update_ssa): Likewise.

2012-08-09  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.h (LIMIT_RELOAD_CLASS): Return preferred
        single unit register class for classes that contain registers form
        multiple units.
        (REG_CLASS_CONTENTS): Add missing "frame" register to FLOAT_INT_REGS,
        INT_SSE_REGS and FLOAT_INT_SSE_REGS register classes.

2012-08-09  Martin Jambor  <mjambor@suse.cz>

        * cgraph.h (cgraph_indirect_call_info): Field anc_offse renamd to
        offset, updated all users.  New field agg_contents.
        * ipa-prop.h (jump_func_type): Removed IPA_JF_CONST_MEMBER_PTR.
        (ipa_pass_through_data): New field agg_preserved.
        (ipa_ancestor_jf_data): Likewise.
        (ipa_member_ptr_cst): Removed.
        (ipa_agg_jf_item): New type.
        (ipa_agg_jump_function): Likewise.
        (ipa_jump_func): New field agg.  Removed field member_cst.
        (ipa_get_jf_pass_through_agg_preserved): New function.
        (ipa_get_jf_ancestor_agg_preserved): Likewise.
        (ipa_get_jf_member_ptr_pfn): Removed.
        (ipa_find_agg_cst_for_param): Declare.
        (ipa_load_from_parm_agg): Likewise.
        * ipa-prop.c (param_analysis_info): Fields modified and
        visited_statements rename to parm_modified and parm_visited_statements
        respectively, added fields ref_modified, ref_visited_statements,
        pt_modified and pt_visited_statements.
        (ipa_print_node_jump_functions_for_edge): Do not dump const member
        functions.  Dump agg_preserved flags and aggregate jump functions.
        (ipa_set_jf_simple_pass_through): Set also agg_preserved.
        (ipa_set_ancestor_jf): Likewise.
        (ipa_set_jf_arith_pass_through): Clear agg_preserved.
        (ipa_set_jf_member_ptr_cst): Removed.
        (is_parm_modified_before_stmt): Logic reversed, renamed to
        parm_preserved_before_stmt_p.  Cache visited bitmap only for
        naked DECL parameters.  All callers updated.
        (load_from_unmodified_param): Allow NULL parms_ainfo.
        (parm_ref_data_preserved_p): New function.
        (parm_ref_data_pass_through_p): Likewise.
        (ipa_load_from_parm_agg_1): Likewise.
        (ipa_load_from_parm_agg): Likewise.
        (compute_complex_assign_jump_func): Check if aggregate contents are
        preserved.
        (compute_complex_ancestor_jump_func): Likewise.
        (compute_scalar_jump_functions): Removed.
        (type_like_member_ptr_p): Also check field position are known and sane.
        (compute_pass_through_member_ptrs): Removed.
        (determine_cst_member_ptr): Likewise.
        (ipa_known_agg_contents_list): New type.
        (determine_known_aggregate_parts): New function.
        (compute_cst_member_ptr_arguments): Removed.
        (ipa_compute_jump_functions_for_edge): Compute all kinds of jump
        functions (scalar, aggregate and member pointer).
        (ipa_get_member_ptr_load_param): Incorporate into
        ipa_get_stmt_member_ptr_load_param, also pass back an offset.
        (ipa_note_param_call): Clear agg_contents.
        (ipa_analyze_indirect_call_uses): Also look for simple pointers loaded
        from aggregates.  In such cases, store offset of the called field.
        (ipa_analyze_node): Initialize new fields of param_analysis_info.
        (update_jump_functions_after_inlining): Handle aggregate contents.
        (ipa_find_agg_cst_for_param): New function.
        (try_make_edge_direct_simple_call): Handle called aggregate values.
        (update_indirect_edges_after_inlining): Make sure aggregate preserving
        jump functions comply with type compatibility requirements.
        (ipa_edge_duplication_hook): Copy also aggregate jump functions.
        (ipa_write_jump_function): Stream agg_preserved flags and aggregate
        jump functions.  Do not stream member pointer constant jump functions.
        (ipa_read_jump_function): Likewise.
        (ipa_write_indirect_edge_info): Stream new cgraph_indirect_call_info
        fields.
        (ipa_read_indirect_edge_info): Likewise.

2012-08-09  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/39423
        * config/sh/predicates.md (mem_index_disp_operand): New predicate.
        * config/sh/sh.md (*movsi_index_disp): Rewrite insns to use the new
        mem_index_disp_operand predicate.

2012-08-09  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/51244
        * config/sh/sh.md: Add negc extu sequence peephole.
        (movrt, movnegt, movrt_negc, nott): Use t_reg_operand predicate.
        (*movrt_negc): New insn.
        * config/sh/sync.md (atomic_test_and_set): Pass gen_t_reg_rtx to
        gen_movnegt.
        * config/sh/sh.c (expand_cbranchsi4, sh_emit_scc_to_t,
        sh_emit_compare_and_branch, sh_emit_compare_and_set): Use
        get_t_reg_rtx.
        (sh_expand_t_scc): Pass gen_t_reg_rtx to gen_movnegt.

2012-08-09  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/50751
        * config/sh/sh.md (*extendqisi2_compact_reg, *extendhisi2_compact_reg):
        Use arith_reg_operand predicate instead of register_operand.
        * config/sh/predicates.md (movsrc_no_disp_mem_operand): Accept
        only mem, simplify.

2012-08-09  Uros Bizjak  <ubizjak@gmail.com>

        * config/alpha/alpha.c (alpha_pad_noreturn): Rename to ...
        (alpha_pad_function_end): ... this.  Also insert NOP between
        sibling call and GP load.
        (alpha_reorg): Update call to alpha_pad_function_end.  Expand comment.

2012-08-09  Michael Zolotukhin  <michael.v.zolotukhin@intel.com>

        * config/i386/adxintrin.h: Remove guarding __ADX__ check.
        * config/i386/x86intrin.h: Likewise.
        * config/i386/i386.c (ix86_init_mmx_sse_builtins): Remove
        OPTION_MASK_ISA_ADX from needed options for
        __builtin_ia32_addcarryx_u32 and __builtin_ia32_addcarryx_u64.
        (ix86_expand_builtin): Use add<mode>3_carry in expanding of
        IX86_BUILTIN_ADDCARRYX32 and IX86_BUILTIN_ADDCARRYX64.

2012-08-09  Andrey Belevantsev  <abel@ispras.ru>

        PR rtl-optimization/53701
        * sel-sched.c (vinsn_vec_has_expr_p): Clarify function comment.
        Process not only expr's vinsns but all old vinsns from expr's
        history of changes.
        (update_and_record_unavailable_insns): Clarify comment.

2012-08-09  Bernd Schmidt  <bernds@codesourcery.com>

        * reload.c (find_valid_class_1): New static function.
        (push_reload): Use it when reloading a SYMBOL_REG as the inner
        of a subreg.  Keep better track of needed classes for the
        secondary memory case.
        * config/i386/i386.h (LIMIT_RELOAD_CLASS): Limit INT_SSE_REGS to
        GENERAL_REGS.
        * reload1.c (replaced_subreg): New static function.
        (gen_reload): Use it when deciding whether to use secondary
        memory.

2012-08-09  Richard Guenther  <rguenther@suse.de>

        * tree.h (SSA_VAR_P): Simplify.
        * tree-ssanames.c (make_ssa_name_fn): Strengthen assert.
        * fold-const.c (fold_comparison): Check for default def first
        before checking for PARM_DECL.
        * tree-complex.c (get_component_ssa_name): Likewise.
        * tree-inline.c (remap_ssa_name): Likewise.
        * tree-ssa-loop-ivopts.c (parm_decl_cost): Likewise.
        * tree-ssa-structalias.c (get_fi_for_callee): Likewise.
        (find_what_p_points_to): Likewise.
        * tree-ssa-operands.c (add_stmt_operand): Simplify.

2012-08-08  Joseph Myers  <joseph@codesourcery.com>

        * simplify-rtx.c (simplify_binary_operation_1): Do not simplify
        IOR to a constant if one operand has side effects.

2012-08-08  Ulrich Weigand  <Ulrich.Weigand@de.ibm.com>

        * builtins.c (expand_builtin_atomic_compare_exchange): Pass old
        value operand as MEM to expand_atomic_compare_and_swap.

        * config/s390/s390.md ("atomic_compare_and_swap<mode>"): Accept
        nonimmediate_operand for old value; generate load and store if
        needed.
        * config/s390/s390.c (s390_expand_cs_hqi): Accept any operand
        as vtarget.

2012-08-08  Steven Bosscher  <steven@gcc.gnu.org>

        PR middle-end/54146
        * gimpify.c (gimplify_body): Only verify_gimple_in_seq with
        checking enabled.
        * tree-ssa-loop-manip.c (add_exit_phis_var): Assert that var is
        a gimple_reg if checking is enabled.
        (find_uses_to_rename_stmt): Only look at non-virtual USE operands.
        * tree-into-ssa (compute_global_livein): Change the worklist
        type from an array to a VEC.

2012-08-08  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-operands.h (virtual_operand_p): Declare.
        * tree-ssa-operands.c (virtual_operand_p): New predicate.
        * gimple.c (is_gimple_reg): Use virtual_operand_p.
        * tree-into-ssa.c (prepare_block_for_update): Likewise.
        * tree-vect-loop-manip.c (adjust_debug_stmts): Likewise.

2012-08-08  Richard Guenther  <rguenther@suse.de>

        * tree-call-cdce.c (check_pow): Simplify.
        (gen_conditions_for_pow_int_base): Likewise.
        * tree-ssa-dom.c (propagate_rhs_into_lhs): Do not handle
        virtual operands here.
        * tree-ssa-operands.c (get_name_decl): Remove unused function.
        * gimplify.c (gimple_regimplify_operands): Remove dead code.
        * tree-vrp.c (get_value_range): Move SSA_NAME_VAR access.
        * tree-parloops.c (create_phi_for_local_result): Use copy_ssa_name.
        * value-prof.c (gimple_ic): Use duplicate_ssa_name.
        (gimple_stringop_fixed_value): Likewise.
        * tree.c (needs_to_live_in_memory): Remove SSA name handling.
        * tree-stdarg.c (find_va_list_reference): Store SSA_NAME_VERSIONs
        in the bitmap alongside shifted DECL_UIDs.
        (va_list_counter_struct_op): Likewise.
        (va_list_ptr_read): Likewise.
        (va_list_ptr_write): Likewise.
        (check_va_list_escapes): Likewise.
        (check_all_va_list_escapes): Likewise.
        (execute_optimize_stdarg): Likewise.
        * tree-outof-ssa.c (insert_backedge_copies): Use copy_ssa_name.

2012-08-08  Richard Sandiford  <rdsandiford@googlemail.com>
            H.J. Lu  <hongjiu.lu@intel.com>

        PR rtl-optimization/54157
        * combine.c (gen_lowpart_for_combine): Don't return identity
        for CONST or symbolic reference.

2012-08-08  Michael Zolotukhin  <michael.v.zolotukhin@intel.com>

        * common/config/i386/i386-common.c (OPTION_MASK_ISA_ADX_SET): New.
        (OPTION_MASK_ISA_ADX_UNSET): Likewise.
        (ix86_handle_option): Handle madx option.
        * config.gcc (i[34567]86-*-*): Add adxintrin.h.
        (x86_64-*-*): Likewise.
        * config/i386/adxintrin.h: New header.
        * config/i386/driver-i386.c (host_detect_local_cpu): Detect ADCX/ADOX
        support.
        * config/i386/i386-builtin-types.def
        (UCHAR_FTYPE_UCHAR_UINT_UINT_PUNSIGNED): New function type.
        (UCHAR_FTYPE_UCHAR_ULONGLONG_ULONGLONG_PULONGLONG): Likewise.
        * config/i386/i386-c.c: Define __ADX__ if needed.
        * config/i386/i386.c (ix86_target_string): Define -madx option.
        (PTA_ADX): New.
        (ix86_option_override_internal): Handle new option.
        (ix86_valid_target_attribute_inner_p): Add OPT_madx.
        (ix86_builtins): Add IX86_BUILTIN_ADDCARRYX32,
        IX86_BUILTIN_ADDCARRYX64.
        (ix86_init_mmx_sse_builtins): Define corresponding built-ins.
        (ix86_expand_builtin): Handle these built-ins.
        (ix86_expand_args_builtin): Handle new function types.
        * config/i386/i386.h (TARGET_ADX): New.
        * config/i386/i386.md (adcx<mode>3): New define_insn.
        * config/i386/i386.opt (madx): New.
        * config/i386/x86intrin.h: Include adxintrin.h.

2012-08-08  Nick Clifton  <nickc@redhat.com>

        * config/rl78/rl78.c: Include tree-pass.h.

2012-08-08  Steven Bosscher  <steven@gcc.gnu.org>

        PR middle-end/54146
        * ira.c (init_live_subregs): Take live_subregs_used as a bitmap.
        (build_insn_chain): Make live_subregs_used a bitmap.
        Use SBITMAP_SIZE to ignore the paradoxical bytes of subregs.
        Use sbitmap_free to free the live_subreg sbitmaps.

        PR middle-end/54146
        * ifcvt.c: Include pointer-set.h.
        (cond_move_process_if_block): Change type of then_regs and
        else_regs from alloca'd array to pointer_sets.
        (check_cond_move_block): Update for this change.
        (cond_move_convert_if_block): Likewise.
        * Makefile.in: Fix dependencies for ifcvt.o.

2012-08-07  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

        * gimple-ssa-strength-reduction.c (struct incr_info_d): New struct.
        (incr_vec): New static var.
        (incr_vec_len): Likewise.
        (address_arithmetic_p): Likewise.
        (stmt_cost): Remove dead assignment.
        (dump_incr_vec): New function.
        (cand_abs_increment): Likewise.
        (lazy_create_slsr_reg): Likewise.
        (incr_vec_index): Likewise.
        (count_candidates): Likewise.
        (record_increment): Likewise.
        (record_increments): Likewise.
        (unreplaced_cand_in_tree): Likewise.
        (optimize_cands_for_speed_p): Likewise.
        (lowest_cost_path): Likewise.
        (total_savings): Likewise.
        (analyze_increments): Likewise.
        (ncd_for_two_cands): Likewise.
        (nearest_common_dominator_for_cands): Likewise.
        (profitable_increment_p): Likewise.
        (insert_initializers): Likewise.
        (introduce_cast_before_cand): Likewise.
        (replace_rhs_if_not_dup): Likewise.
        (replace_one_candidate): Likewise.
        (replace_profitable_candidates): Likewise.
        (analyze_candidates_and_replace): Handle candidates with SSA-name
        strides.

2012-08-07  Steven Bosscher  <steven@gcc.gnu.org>

        * cfg.c (debug_bb): Do not set TDF_BLOCKS.
        * cfghooks.c (dump_bb): Honor ~TDF_BLOCKS.
        * pretty-print.c (pp_base_flush): Do not add a newline, and do not
        clear pp_needs_newline.
        * pretty-print.h (pp_newline_and_flush): New macro with the behavior
        of pp_base_flush before the above change.
        * langhooks.c (lhd_print_error_function): Use pp_newline_and_flush
        instead of pp_flush.
        * diagnostic.c (diagnostic_finish): Likewise.
        (diagnostic_report_diagnostic): Likewise.
        (verbatim): Likewise.
        (error_recursion): Likewise.
        * tree-pretty-print.c (print_generic_stmt): Likewise.
        (print_generic_stmt_indented): LIkewise.
        * gimple-pretty-print.c (print_gimple_stmt): Likewise.
        (print_gimple_seq): Likewise.
        (gimple_dump_bb_buff): Likewise.

2012-08-07  Uros Bizjak  <ubizjak@gmail.com>

        PR debug/54177
        * var-tracking.c (var_lowpart): Exit early for matched modes.

2012-08-07  Richard Henderson  <rth@redhat.com>

        * config/s390/s390.c (s390_emit_compare_and_swap): Update for
        atomic_compare_and_swapsi_internal name change.
        (s390_expand_insv): Try RISBG last, not requiring operands in
        registers but forcing them there.  Try a limited form of ICM.
        (s390_two_part_insv): New.
        (s390_expand_cs_hqi): Use it.  Update for atomic optabs.
        * config/s390/s390.md (UNSPEC_MOVA): New.
        (TDSI): Remove mode iterator.
        (DGPR, DINT, TDI): New mode iterators.
        (td): New mode attribute.
        (mem_signal_fence): New.
        (mem_thread_fence): Rename from memory_barrier; update for model arg.
        (mem_thread_fence_1): Rename from *memory_barrier.
        (atomic_load<DINT>, atomic_store<DINT>): New expanders.
        (atomic_loaddi_1, atomic_loadti_1): New.
        (atomic_storedi_1, atomic_storeti_1): New.
        (sync_compare_and_swap<TDSI>, sync_compare_and_swap<HQI>): Remove.
        (atomic_compare_and_swap<DGPR>, atomic_compare_and_swap<HQI>): New.
        (atomic_compare_and_swap<DGPR>_internal): New.
        (*sync_compare_and_swap<DW>, *sync_compare_and_swap<GPR>): Remove.
        (*atomic_compare_and_swap<TDI>_1): New.
        (*atomic_compare_and_swapdi_2, *atomic_compare_and_swapsi_3): New.
        (sync_<ATOMIC_Z196><GPR>, sync_old_<ATOMIC_Z196><GPR>): Remove.
        (atomic_fetch_<ATOMIC_Z196><GPR>): New.
        (atomic_fetch_<ATOMC_Z196><GPR>_iaf): New.
        (sync_<ATOMIC><HQI>, sync_old_<ATOMIC><HQI>): Remove.
        (sync_new_<ATOMIC><HQI>): Remove.
        (atomic_<ATOMIC><HQI>, atomic_fetch_<ATOMIC><HQI>): New.
        (atomic_<ATOMIC>_fetch<HQI>): New.
        (sync_lock_test_and_set<HQI>): Remove.
        (atomic_exchange<HQI>): New.

2012-08-07  Paul Brook  <paul@codesourcery.com>
            Sandra Loosemore  <sandra@codesourcery.com>

        * except.c (switch_to_exception_section): Place tables for
        DECL_ONE_ONLY functions in comdat groups.

2012-08-07  Richard Guenther  <rguenther@suse.de>

        * tree-flow.h (copy_ssa_name_fn): New function.
        (duplicate_ssa_name_fn): Likewise.
        * tree-flow-inline.h (copy_ssa_name): New function.
        (duplicate_ssa_name): Likewise.
        * tree-ssanames.c (copy_ssa_name_fn): New function.
        (duplicate_ssa_name): Rename to ...
        (duplicate_ssa_name_fn): ... this and adjust.
        * tree-tailcall.c (update_accumulator_with_ops): Use copy_ssa_name.
        * tree-vect-loop-manip.c (slpeel_update_phi_nodes_for_guard1):
        Likewise.
        (slpeel_update_phi_nodes_for_guard2): Likewise.
        (slpeel_tree_peel_loop_to_edge): Likewise.
        (vect_loop_versioning): Likewise.
        * tree-parloops.c (transform_to_exit_first_loop): Likewise.
        (create_parallel_loop): Likewise.
        * ipa-split.c (split_function): Likewise.
        * tree-vect-loop.c (vect_is_simple_reduction_1): Likewise.
        (vect_create_epilog_for_reduction): Likewise.
        * tree-vect-data-refs.c (bump_vector_ptr): Likewise.
        (vect_setup_realignment): Likewise.
        * tree-vect-stmts.c (vectorizable_load): Likewise.
        * tree-switch-conversion.c (build_one_array): Likewise.
        (gen_def_assigns): Likewise.
        * tree-cfg.c (gimple_make_forwarder_block): Likewise.
        * graphite-sese-to-poly.c (rewrite_close_phi_out_of_ssa): Call
        create_zero_dim_array with the SSA name.
        (rewrite_phi_out_of_ssa): Likewise.
        (rewrite_cross_bb_scalar_dependence): Likewise.  Use copy_ssa_name.

2012-08-07  Richard Guenther  <rguenther@suse.de>

        * tree-dfa.c (set_ssa_default_def): Clear the SSA_NAME_DEFAULT_DEF
        bit of the old name when we clear the slot.
        * tree-ssa-live.c (remove_unused_locals): Release any default
        def associated with an unused var.
        * tree-ssa-copy.c (may_propagate_copy_into_asm): Always return true.

2012-08-07  Richard Guenther  <rguenther@suse.de>

        * tree-into-ssa.c (rewrite_stmt): Remove clobbers for variables
        we rewrite into SSA form.
        (rewrite_enter_block): Adjust.
        * gimple-iterator.c (gsi_replace): Also allow replacement with
        a stmt without a lhs.
        * tree-ssa-live.c (remove_unused_locals): Remove code handling
        clobbers of SSA names.
        * tree-nested.c (convert_local_reference_stmt): Remove clobbers
        for variables we access through the local chain.
        * tree-cfg.c (verify_gimple_assign_single): Verify clobbers
        clobber full decls only.

2012-08-07  Richard Guenther  <rguenther@suse.de>

        * gimple.h (gimple_phi_set_result): Adjust SSA_NAME_DEF_STMT.
        * tree-phinodes.c (make_phi_node): Allow a NULL var.
        * tree-into-ssa.c (insert_phi_nodes_for): Simplify.
        * tree-complex.c (update_phi_components): Likewise.
        * tree-ssa-loop-manip.c (create_iv): Likewise.
        (add_exit_phis_edge): Likewise.
        (split_loop_exit_edge): Likewise.
        (tree_transform_and_unroll_loop): Likewise.
        * value-prof.c (gimple_ic): Likewise.
        (gimple_stringop_fixed_value): Likewise.
        * tree-tailcall.c (tree_optimize_tail_calls_1): Likewise.
        * omp-low.c (expand_parallel_call): Likewise.
        (expand_omp_for_static_chunk): Likewise.
        (expand_omp_atomic_pipeline): Likewise.
        * tree-parloops.c (create_phi_for_local_result): Likewise.
        (transform_to_exit_first_loop): Likewise.
        * tree-vect-data-refs.c (vect_setup_realignment): Likewise.
        * graphite-scop-detection.c (canonicalize_loop_closed_ssa): Likewise.
        * tree-predcom.c (initialize_root_vars): Likewise.
        (initialize_root_vars_lm): Likewise.
        * sese.c (sese_add_exit_phis_edge): Likewise.
        * gimple-streamer-in.c (input_phi): Likewise.
        * tree-inline.c (copy_phis_for_bb): Likewise.
        * tree-ssa-phiprop.c (phiprop_insert_phi): Likewise.
        * tree-cfg.c (gimple_make_forwarder_block): Likewise.
        (gimple_duplicate_bb): Likewise.

2012-08-07  Nick Clifton  <nickc@redhat.com>

        * config/mn10300/mn10300.c (mn10300_expand_prologue): Report
        stack usage if requested.

2012-08-06  Cary Coutant  <ccoutant@google.com>

        * cgraphunit.c (assemble_thunk): Add source line info.
        * final.c (final): Check for non-null cfg pointer.

2012-08-06  Sandra Loosemore  <sandra@codesourcery.com>
            Maxim Kuvyrkov  <maxim@codesourcery.com>
            Julian Brown  <julian@codesourcery.com>

        * config/mips/24k.md (r24k_unknown_store): Delete special handling
        for cprestore.
        (r24k_int_load, r24k_int_arith, r24k_int_mul3, r24k_int_mfhilo)
        (r24k_int_cop, r24k_int_multi)
        (r24kf2_1_fcvt_f2i, r24kf2_1_fxfer)
        (r24kf1_1_fcvt_f2i, r24kf1_1_fxfer): Use mips_store_data_bypass_p
        instead of store_data_bypass_p.
        * config/mips/74k.md (r74k_int_store): Delete special handling for
        cprestore.
        (r74k_int_load, r74k_int_logical, r74k_int_arith, r74k_int_cmove):
        Use mips_store_data_bypass_p instead of store_data_bypass_p.

2012-08-06  Marc Glisse  <marc.glisse@inria.fr>

        PR tree-optimization/51938
        PR tree-optimization/52005
        * tree-ssa-ifcombine.c (ifcombine_ifandif): New parameters for
        inverted conditions.
        (ifcombine_iforif): Remove, merge code into ifcombine_ifandif.
        (tree_ssa_ifcombine_bb): Update calls to the above. Detect !a&&b
        and !a||b patterns.

2012-08-06  Olivier Hainque  <hainque@adacore.com>

        * tree-emutls.c (new_emutls_decl): When a var_section is requested by
        the target, attach the new decl to that, not to the template section.

2012-08-06  Tom de Vries  <tom@codesourcery.com>

        * tree-switch-conversion.c (emit_case_bit_tests): Generate MINUS_EXPR in
        unsigned type.

2012-08-05  Venkataramanan Kumar  <venkataramanan.kumar@amd.com>

        * doc/invoke.texi: Document AMD btver2.
        * doc/extend.texi: Document AMD btver1 and btver2.

2012-08-04  Sandra Loosemore  <sandra@codesourcery.com>
            Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/mips.c (mips_option_override): Check -fpic
        for compatibility with -mabicalls and ABI.

2012-08-04  Catherine Moore  <clm@codesourcery.com>
            Sandra Loosemore  <sandra@codesourcery.com>

        * config/mips/xlr.md (ir_xlr_alu_clz): New insn_reservation.
        (ir_xlr_alu): Remove clz.
        * config/mips/mips-cpus.def (xlr): Set PTF_AVOID_BRANCHLIKELY.

2012-08-04  Richard Earnshaw  <rearnsha@arm.com>

        * arm.c (arm_gen_constant): Use SImode when preparing operands for
        gen_extzv_t2.

2012-08-04  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.h (QI_REGNO_P): New define.
        (ANY_QI_REGNO_P): Ditto.
        (GENERAL_REGNO_P): Use IN_RANGE macro.
        (QI_REG_P): Use QI_REGNO_P.
        (ANY_QI_REG_P): Use GENERAL_REGNO_P and QI_REGNO_P.
        (HARD_REGNO_CALLER_SAVE_MODE): Use QI_REGNO_P.
        * config/i386/i386.c (ix86_hard_regno_mode_ok): Ditto.
        (x86_extended_QIreg_mentioned_p): Ditto.  Also check if
        register is a general register.

2012-08-03  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/sync.md (*atomic_fetch_add_cmp<mode>): Use
        incdec_operand predicate to return INC or DEC insn mnemonic.
        Add %K operand modifier.
        (atomic_add<mode>): Use incdec_operand predicate to
        return INC or DEC insn mnemonic.
        (atomic_dec<mode>): Ditto.

2012-08-03  Michael Matz  <matz@suse.de>

        PR tree-optimization/54146
        * cfgexpand.c (add_scope_conflicts_1): Use bitmap_ior_into.
        (add_scope_conflicts): Iterate in RPO order.
        (add_stack_protection_conflicts): Iterate over the other triangle.
        (fini_vars_expansion): Clear stack_vars_sorted.

2012-08-03  Marc Glisse  <marc.glisse@inria.fr>

        PR tree-optimization/30318
        * double-int.c (mul_double_wide_with_sign): New function.
        (mul_double_with_sign): Call the new function.
        * double-int.h (mul_double_wide_with_sign): Declare the new function.
        * tree-vrp.c (extract_range_from_binary_expr_1) [MULT_EXPR]:
        Handle integer types that wrap on overflow.
        (quad_int_cmp): New helper function.
        (quad_int_pair_sort): Likewise.

2012-08-03  Richard Guenther  <rguenther@suse.de>

        * tree-vect-loop-manip.c (vect_can_advance_ivs_p): Query
        is_gimple_reg on the SSA name, not its variable.
        (vect_update_ivs_after_vectorizer): Likewise.
        * tree-ssa-copyrename.c (rename_ssa_copies): Likewise.
        * tree-if-conv.c (if_convertible_phi_p): Likewise.
        (predicate_scalar_phi): Likewise.
        * tree-vect-loop.c (vect_analyze_scalar_cycles_1): Likewise.
        (vect_analyze_scalar_cycles_1): Likewise.
        * tree-ssa-live.c (register_ssa_partition_check): Likewise.
        * tree-outof-ssa.c (eliminate_useless_phis): Likewise.
        * tree-ssa-reassoc.c (phi_rank): Likewise.
        * tree-parloops.c (separate_decls_in_region_name): Use
        replace_ssa_name_symbol.
        * tree-predcom.c (base_names_in_chain_on): Likewise.
        * matrix-reorg.c (update_type_size): Query the type of the SSA name,
        not its variable.
        * gimple-ssa-strength-reduction.c (create_mul_ssa_cand): Likewise.
        (create_mul_imm_cand): Likewise.
        (create_add_ssa_cand): Likewise.
        (create_add_imm_cand): Likewise.
        (slsr_process_add): Likewise.
        * tree-inline.c (remap_ssa_name): Do not set the type of the
        new SSA_NAME.
        * tree-ssa-structalias.c (get_constraint_for_ssa_var): Clarify assert.
        Check for default def first.

2012-08-04  Steven Bosscher  <steven@gcc.gnu.org>

        * cfgrtl.c (print_rtl_with_bb): Do not print a newline between insns.

        * sched-vis.c (print_pattern): Handle SEQUENCE also.

2012-08-02  Richard Henderson  <rth@redhat.com>

        Revert:
        PR 34548
        * function.h (struct rtl_data): Add max_dynamic_stack_alignment.
        * cfgexpand.c (gimple_expand_cfg): Initialise it.
        * explow.c (allocate_dynamic_stack_space): Set it.  Simplify
        alignment requirements given the known alignment of dynamic_offset.
        * function.c (instantiate_virtual_regs): Align dtnamic_offset.

2012-08-02  Kenneth Zadeck <zadeck@naturalbridge.com>

        * cfgexpand.c (expand_debug_locations):  Encapsulate test for
        CONST_DOUBLE in macro.
        * combine.c (try_combine, gen_lowpart_for_combine): Ditto.
        * cprop.c (implicit_set_cond_p): Ditto.
        * cselib.c (rtx_equal_for_cselib_1): Ditto.
        * expmed.c (expand_mult): Ditto.
        * expr.c (convert_modes): Ditto.
        * ira-costs.c (record_reg_classes): Ditto.
        * ira-lives.c (single_reg_class): Ditto.
        * optabs.c (expand_copysign_absneg, expand_copysign): Ditto.
        * print-rtl.c (print_rtx): Ditto.
        * recog.c (simplify_while_replacing, const_double_operand)
        (asm_operand_ok, constrain_operands): Ditto.
        * reg-stack.c (subst_stack_regs_pat): Ditto.
        * reload.c (find_reloads, find_equiv_reg): Ditto.
        * rtlanal.c (replace_rtx): Remove test.
        * rtlanal.c (constant_pool_constant_p, split_double): Encapsulate
        test for CONST_DOUBLE in macro.
        * simplify-rtx.c (mode_signbit_p, avoid_constant_pool_reference)
        (simplify_unary_operation_1, simplify_const_unary_operation)
        (simplify_binary_operation_1, simplify_const_binary_operation)
        (simplify_relational_operation_1)
        (simplify_const_relational_operations)
        (implify_subreg): Ditto.
        * varasm.c (output_constant_pool_2): Ditto.
        * rtl.h (CONST_DOUBLE_AS_INT_P, CONST_DOUBLE_AS_FLOAT_P): New macros.
        * rtl.def (CONST_DOUBLE):  Updated comments.

2012-08-02  Richard Sandiford  <rdsandiford@googlemail.com>

        PR target/51931
        * config/mips/mips-protos.h (mips_strip_unspec_address): Declare.
        * config/mips/mips.c (mips_strip_unspec_address): Make extern.
        (mips16_rewrite_pool_constant): Make a copy of the pool constant
        before adding to a PC-relative table.
        (mips16_lay_out_constants): Add a SPLIT_P parameter.
        (mips16_load_branch_target, mips16_split_long_branches): New functions.
        (mips_reorg): Update call to mips16_lay_out_constants.
        Call mips16_split_long_branches.
        * config/mips/predicates.md (pc_or_label_operand): Delete.
        * config/mips/mips.md (length): Add a calculation for MIPS16 branches.
        Move the extended_mips16 handling further down.
        (*branch_equality<mode>_mips16): Replace use pc_or_label_operand
        with explicit label_ref and pc.  Follow the usual operand numbering.
        (*branch_equality<mode>_mips16_inverted): New pattern.
        (*jump_mips16): Add length attribute.
        (indirect_jump_and_restore_<mode>): New pattern.
        (consttable_int): Call mips_strip_unspec_address on the operand.

2012-08-02  Richard Sandiford  <rdsandiford@googlemail.com>

        * recog.c (split_insn): Copy the original SET_SRC before using
        it as a note.

2012-08-02  Richard Sandiford  <rdsandiford@googlemail.com>

        * reorg.c (dbr_schedule): Delete REG_BR_PRED loop.

2012-08-02  Marc Glisse  <marc.glisse@inria.fr>

        PR tree-optimization/53805
        * fold-const.c (invert_tree_comparison): Invert ORDERED_EXPR and
        UNORDERED_EXPR even for trapping floating point.

2012-08-02  H.J. Lu  <hongjiu.lu@intel.com>

        PR middle-end/53321
        PR middle-end/53865
        * ipa-inline-analysis.c (inline_free_summary): Return if
        inline_edge_summary_vec is NULL.

        * ipa-split.c (execute_split_functions): Check if a function
        is inlinable only if inline_edge_summary_vec != NULL.

        * ipa.c (symtab_remove_unreachable_nodes): Restore
        cgraph_propagate_frequency call when something was changed.
        (free_inline_summary): New function.
        (pass_ipa_free_inline_summary): New pass.

        * passes.c (init_optimization_passes): Add
        pass_ipa_free_inline_summary before pass_ipa_tree_profile.

        * timevar.def (TV_IPA_FREE_INLINE_SUMMARY): New.

        * tree-pass.h (pass_ipa_free_inline_summary): New.

2012-08-02  Richard Earnshaw  <rearnsha@arm.com>

        * arm.c (arm_gen_constant): Use UBFX for some AND operations when
        available.

2012-08-02  Richard Guenther  <rguenther@suse.de>

        * tree-into-ssa.c (struct common_info_d): New struct.
        (struct var_info_d, struct ssa_name_info): Use it.
        (get_ssa_name_ann): Adjust.
        (get_phi_state, set_phi_state): Remove.
        (get_common_info): New function.
        (get_current_def, set_current_def): Adjust.
        (get_def_blocks_for): Take a common info as param.
        (set_def_block): Call get_common_info once.
        (set_livein_block): Likewise.
        (find_def_blocks_for): Adjust.
        (insert_phi_nodes): Likewise.
        (register_new_def): Call get_common_info once.
        (get_reaching_def): Likewise.
        (rewrite_debug_stmt_uses): Likewise.
        (rewrite_leave_block): Likewise.
        (dump_currdefs): Likewise.
        (debug_var_infos_r): Adjust.
        (register_new_update_single): Call get_common_info once.
        (maybe_replace_use_in_debug_stmt): Likewise.
        (rewrite_update_leave_block): Likewise.
        (mark_use_interesting): Adjust.
        (create_new_def_for): Likewise.
        (update_ssa): Likewise.

2012-08-02  Michael Matz  <matz@suse.de>

        * tree-ssa-live.c (set_is_used): Return a bool.
        (mark_all_vars_used): Don't take data argument.
        (mark_all_vars_used_1): Adjust calls to above, merge handling
        of local and global vars.
        (remove_unused_scope_block_p): Don't take global_unused_vars,
        merge handling of local and global vars.
        (remove_unused_locals): Don't allocate/fill/pass global_unused_vars,
        use is_used_p for local and global vars.

2012-08-02  Richard Guenther  <rguenther@suse.de>

        * tree-flow.h (make_rename_temp): Remove.
        * tree-dfa.c (make_rename_temp): Likewise.
        * cgraphunit.c (thunk_adjust, assemble_thunk): Use create_tmp_reg
        instead of make_rename_temp.
        * omp-low.c (expand_omp_for_generic, expand_omp_for_static_nochunk,
        expand_omp_atomic_pipeline): Likewise.
        * trans-mem.c (tm_log_emit_save_or_restores, build_tm_load,
        build_tm_store, expand_call_tm, expand_transaction,
        ipa_tm_insert_gettmclone_call): Likewise.
        * tree-complex.c (expand_complex_div_wide): Likewise.
        * tree-mudflap.c (mf_decl_cache_locals, mf_build_check_statement_for):
        Likewise.
        * tree-ssa-loop-im.c (execute_sm_if_changed_flag_set, execute_sm):
        Likewise.
        * tree-ssa-math-opts.c (insert_reciprocals): Likewise.
        * value-prof.c (gimple_divmod_fixed_value, gimple_mod_pow2,
        gimple_mod_subtract): Likewise.

2012-08-02  Richard Guenther  <rguenther@suse.de>

        * tree-flow.h (set_default_def): Rename to ...
        (set_ssa_default_def): ... this.  Take a struct function argument.
        (gimple_default_def): Rename to ...
        (ssa_default_def): ... this.
        (get_or_create_ssa_default_def): New function.
        * tree-dfa.c: Likewise.
        (dump_variable): Adjust.
        * ipa-prop.c (ipa_analyze_params_uses): Adjust, properly check
        for used parameters.
        * ipa-split.c (consider_split): Adjust, avoid repeated default-def
        lookups.
        (split_function): Likewise.
        * lto-streamer-in.c (input_ssa_names): Adjust.
        * omp-low.c (expand_omp_taskreg): Likewise.
        * tree-cfg.c (replace_ssa_name): Adjust, no need to push/pop cfun.
        * tree-complex.c (init_parameter_lattice_values): Adjust.
        (get_component_ssa_name): Likewise.
        (update_parameter_components): Likewise.
        * tree-inline.c (remap_ssa_name): Likewise.
        (setup_one_parameter): Likewise.
        (initialize_inlined_parameters): Likewise.
        (declare_return_variable): Likewise.
        (expand_call_inline): Likewise.
        (tree_function_versioning): Likewise.
        * tree-into-ssa.c (get_default_def_for): Remove.
        (get_reaching_def): Use get_or_create_ssa_default_def instead.
        * tree-predcom.c (replace_ref_with): Adjust.
        * tree-sra.c (get_repl_default_def_ssa_name): Likewise.
        (is_unused_scalar_param): Likewise.
        (ptr_parm_has_direct_uses): Likewise.
        (sra_ipa_reset_debug_stmts): Likewise.
        * tree-ssa-coalesce.c (create_outofssa_var_map): Adjust.
        * tree-ssa-copyrename.c (copy_rename_partition_coalesce): Likewise.
        * tree-ssa-live.c (verify_live_on_entry): Likewise.
        * tree-ssa-math-opts.c (execute_cse_reciprocals): Likewise,
        avoid repeated default def lookups.
        * tree-ssa-sccvn.c (run_scc_vn): Likewise.
        * tree-tailcall.c (arg_needs_copy_p): Adjust.
        (tree_optimize_tail_calls_1): Likewise.

2012-08-02  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/50672
        Revert
        2012-08-01  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-tail-merge.c (release_last_vdef): Remove.
        (replace_block_by): Adjust.

2012-08-02  Richard Guenther  <rguenther@suse.de>

        * tree-dfa.c (referenced_var_lookup): Remove.
        (find_referenced_vars): Remove.
        (pass_referenced_vars): Likewise.
        (make_rename_temp): Do not add referenced vars.
        (dump_referenced_vars): Remove.
        (debug_referenced_vars): Likewise.
        (dump_dfa_stats): Do not dump referenced var stats.
        (find_vars_r): Remove.
        (find_referenced_vars_in): Likewise.
        (referenced_var_check_and_insert): Likewise.
        (add_referenced_var_1): Likewise.
        (remove_referenced_var): Likewise.
        * tree-flow.h (referenced_var_lookup): Likewise.
        (struct gimple_df): Remove referenced_vars member.
        (typedef referenced_var_iterator): Remove.
        (FOR_EACH_REFERENCED_VAR): Likewise.
        (num_referenced_vars): Likewise.
        (debug_referenced_vars, dump_referenced_vars): Likewise.
        (add_referenced_var_1, add_referenced_var): Likewise.
        (remove_referenced_var): Likewise.
        (find_referenced_vars_in): Likewise.
        * tree-flow-inline.h (gimple_referenced_vars): Remove.
        (first_referenced_var): Likewise.
        (end_referenced_vars_p): Likewise.
        (next_referenced_var): Likewise.
        * cfgexpand.c (update_alias_info_with_stack_vars): Remove assert.
        * gimple-pretty-print.c (pp_points_to_solution): Dump UIDs
        unconditionally.
        * tree-into-ssa.c (dump_decl_set): Likewise.
        (pass_build_ssa): Do not require PROP_referenced_vars.
        * tree-ssa.c (target_for_debug_bind): Virtual operands are
        not suitable, but all register type vars are.
        (init_tree_ssa): Do not allocate referenced vars.
        (delete_tree_ssa): Do not free referenced vars.
        * cgraphunit.c (init_lowered_empty_function): Do not set
        PROP_referenced_vars.
        (assemble_thunk): Do not add referenced vars.
        * gimple-fold.c (canonicalize_constructor_val): Likewise.
        (gimplify_and_update_call_from_tree): Likewise.
        * gimple-streamer-in.c (input_bb): Likewise.
        * passes.c (init_optimization_passes): Do not run
        pass_referenced_vars.
        (dump_properties): Do not dump PROP_referenced_vars.
        * tree-inline.c (remap_decl): Do not add referenced vars.
        (remap_gimple_op_r): Likewise.
        (copy_tree_body_r): Likewise.
        (copy_bb): Likewise.
        (setup_one_parameter): Likewise.
        (declare_return_variable): Likewise.
        (copy_decl_for_dup_finish): Likewise.
        (copy_arguments_for_versioning): Likewise.
        (tree_function_versioning): Likewise.
        * tree-pass.h (PROP_referenced_vars): Remove.
        (pass_referenced_vars): Likewise.
        * tree-profile.c (gimple_gen_edge_profiler): Do not add
        referenced vars.
        (gimple_gen_interval_profiler): Likewise.
        (gimple_gen_pow2_profiler): Likewise.
        (gimple_gen_one_value_profiler): Likewise.
        (gimple_gen_ic_profiler): Likewise.
        (gimple_gen_average_profiler): Likewise.
        (gimple_gen_ior_profiler): Likewise.
        * tree-ssa-live.c (remove_unused_locals): Do not touch referenced vars.
        * tree-cfg.c (replace_ssa_name): Do not add referenced vars.
        (move_stmt_op): Likewise.
        * tree-ssa-operands.c (create_vop_var): Likewise.
        * gimple-low.c (record_vars_into): Likewise.
        * gimplify.c (gimple_regimplify_operands): Likewise.
        (force_gimple_operand_1): Likewise.
        * omp-low.c (expand_omp_for_generic): Likewise.
        (expand_omp_for_static_chunk): Likewise.
        (expand_omp_atomic_pipeline): Likewise.
        * graphite-clast-to-gimple.c (graphite_create_new_loop): Likewise.
        (translate_clast_assignment): Likewise.
        * graphite-sese-to-poly.c (create_zero_dim_array): Likewise.
        (handle_scalar_deps_crossing_scop_limits): Likewise.
        * ipa-prop.c (ipa_modify_formal_parameters): Likewise.
        * ipa-split.c (split_function): Likewise.
        * matrix-reorg.c (transform_access_sites): Likewise.
        * trans-mem.c (tm_log_add): Likewise.
        (ipa_tm_insert_gettmclone_call): Likewise.
        * tree-complex.c (create_one_component_var): Likewise.
        * tree-if-conv.c (ifc_temp_var): Likewise.
        * tree-parloops.c (take_address_of): Likewise.
        (initialize_reductions): Likewise.
        (separate_decls_in_region_name): Likewise.
        (create_call_for_reduction_1): Likewise.
        (separate_decls_in_region): Likewise.
        * tree-predcom.c (predcom_tmp_var): Likewise.
        (reassociate_to_the_same_stmt): Likewise.
        * tree-sra.c (build_ref_for_offset): Likewise.
        (create_access_replacement): Likewise.
        (get_replaced_param_substitute): Likewise.
        (sra_ipa_reset_debug_stmts): Likewise.
        * tree-ssa-loop-im.c (rewrite_reciprocal): Likewise.
        (rewrite_bittest): Likewise.
        * tree-ssa-loop-ivopts.c (create_new_iv): Likewise.
        * tree-ssa-loop-manip.c (create_iv): Likewise.
        (tree_transform_and_unroll_loop): Likewise.
        * tree-ssa-math-opts.c (powi_as_mults): Likewise.
        (build_and_insert_call): Likewise.
        (gimple_expand_builtin_cabs): Likewise.
        (execute_optimize_bswap): Likewise.
        * tree-ssa-phiopt.c (conditional_replacement): Likewise.
        (abs_replacement): Likewise.
        (cond_store_replacement): Likewise.
        (cond_if_else_store_replacement_1): Likewise.
        * tree-ssa-phiprop.c (phiprop_insert_phi): Likewise.
        * tree-ssa-pre.c (get_representative_for): Likewise.
        (create_expression_by_pieces): Likewise.
        (insert_into_preds_of_block): Likewise.
        * tree-ssa-propagate.c (update_call_from_tree): Likewise.
        * tree-ssa-reassoc.c (undistribute_ops_list): Likewise.
        (eliminate_redundant_comparison): Likewise.
        (rewrite_expr_tree_parallel): Likewise.
        (get_reassoc_pow_ssa_name): Likewise.
        * tree-ssa-strlen.c (get_string_length): Likewise.
        * tree-switch-conversion.c (emit_case_bit_tests): Likewise.
        (build_arrays): Likewise.
        * tree-tailcall.c (adjust_return_value_with_ops): Likewise.
        (create_tailcall_accumulator): Likewise.
        * tree-vect-data-refs.c (vect_get_new_vect_var): Likewise.
        (vect_create_addr_base_for_vector_ref): Likewise.
        (vect_permute_store_chain): Likewise.
        (vect_permute_load_chain): Likewise.
        * tree-vect-generic.c (expand_vector_divmod): Likewise.
        * tree-vect-loop-manip.c (set_prologue_iterations): Likewise.
        (vect_build_loop_niters): Likewise.
        (vect_generate_tmps_on_preheader): Likewise.
        (vect_update_ivs_after_vectorizer): Likewise.
        (vect_gen_niters_for_prolog_loop): Likewise.
        (vect_do_peeling_for_alignment): Likewise.
        (vect_create_cond_for_align_checks): Likewise.
        * tree-vect-patterns.c (vect_recog_temp_ssa_var): Likewise.
        (vect_handle_widen_op_by_const): Likewise.
        (vect_operation_fits_smaller_type): Likewise.
        (vect_recog_over_widening_pattern): Likewise.
        * tree-vect-stmts.c (vect_init_vector): Likewise.

2012-08-01  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/52983
        * valtrack.c (dead_debug_insert_temp): Use cleanup_auto_inc_dec.

2012-08-01  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/52983
        * valtrack.c (cleanup_auto_inc_dec): Implement unconditionally,
        falling back to copy_rtx on non-autoinc machines.
        (propagate_for_debug_subst): Always use cleanup_auto_inc_dec.

2012-08-01  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/52983
        * valtrack.h, valtrack.c: New.
        * Makefile.in (VALTRACK_H): New.
        (OBJS): Add valtrack.o.
        (valtrack.o): New.
        (cselib.o, dce.o, df-problems.o, combine.o): Add VALTRACK_H.
        * combine.c: Include valtrack.h.
        (make_compound_operation): Publish.
        (cleanup_auto_inc_dec): Move to valtrack.c.
        (struct rtx_subst_pair, propagate_for_debug_subst): Likewise.
        (propagate_for_debug): Likewise.  Add this_basic_block parameter.
        Adjust all callers.
        * cselib.c: Include valtrack.h.
        * dce.c: Likewise.
        * df-problems.c: Likewise.
        (dead_debug_init, dead_debug_reset_uses): Move to valtrack.c.
        (dead_debug_finish, dead_debug_add): Likewise.
        (dead_debug_insert_temp): Likewise.
        * df.h (struct dead_debug_use): Move to valtrack.h.
        (struct dead_debug, enum debug_temp_where): Likewise.
        (dead_debug_init, dead_debug_reset_uses): Move to valtrack.h.
        (dead_debug_finish, dead_debug_add): Likewise.
        (dead_debug_insert_temp): Likewise.
        * rtl.h (make_compound_operation): Declare.

2012-08-01  Catherine Moore  <clm@codesourcery.com>
            Sandra Loosemore  <sandra@codesourcery.com>

        * config/mips/mips-cpus.def (34kn): New.
        * config/mips/mips.h (MIPS_ARCH_FLOAT_SPEC): Add 34kn.
        (BASE_DRIVER_SELF_SPECS): Do not imply -mdsp for the 34kn.
        * config/mips/mips-tables.opt: Regenerate.
        * doc/invoke.texi (MIPS Options): Document -march=34kn.

2012-08-01  Richard Henderson  <rth@redhat.com>

        * expmed.h (NUM_MODE_PARTIAL_INT): New.
        (NUM_MODE_VECTOR_INT, NUM_MODE_IP_INT, NUM_MODE_IPV_INT): New.
        (struct expmed_op_cheap): Size one array on NUM_MODE_IPV_INT.
        (struct expmed_op_costs): Likewise.
        (struct target_expmed): Size x_convert_cost on NUM_MODE_IP_INT.
        (expmed_mode_index): New.
        (expmed_op_cheap_ptr, expmed_op_cost_ptr): Use expmed_mode_index.
        (convert_cost_ptr): Likewise.
        * expmed.c (struct init_expmed_rtl): Rename convert to trunc.
        (init_expmed_one_conv): Split out from ...
        (init_expmed_one_mode): ... here.  Iterate conversions over
        partial integer modes too.
        (init_expmed): Iterate over partial integer modes too.

2012-08-01  Richard Henderson  <rth@redhat.com>

        * config/m32c/m32c.c (TARGET_INIT_LIBFUNCS): Remove.
        (m32c_init_libfuncs): Remove.
        * config/m32c/cond.md (cstore<QHPSI>4_16): Rename from cstore<QHPSI>4.
        (cstore<QHPSI>4): New expander.

2012-08-01  Richard Guenther  <rguenther@suse.de>

        * tree-flow-inline.h (referenced_var): Remove.
        * tree-ssa-coalesce.c (create_outofssa_var_map): Remove duplicate
        checking code.
        * tree-sra.c (candidates): New global hashtable.
        (candidate): New function.
        (sra_initialize): Initialize candidates.
        (sra_deinitialize): Free candidates.
        (disqualify_candidate): Remove candidate from candidates.
        (maybe_add_sra_candidate): New function.
        (find_var_candidates): Walk over all local decls and parameters,
        add candidates to candidates hashtable.
        (find_param_candidates): Add candidates to candidates hashtable.
        (analyze_all_variable_accesses): Use candidate instead of
        referenced_var.

2012-08-01  Tom de Vries  <tom@codesourcery.com>

        * tree-vrp.c (find_case_label_ranges): New function.
        (vrp_visit_switch_stmt, simplify_switch_using_ranges): Use
        find_case_label_ranges instead of find_case_label_range.  Handle second
        range.

2012-08-01  Michael Matz  <matz@suse.de>

        * tree-complex.c (init_parameter_lattice_values): Don't call var_ann.
        * tree-dfa.c (struct dfa_stats_d): Remove num_var_anns member.
        (dump_dfa_stats): Don't dump stats about var anns.
        (collect_dfa_stats): Don't collect them.
        (add_referenced_var_1): Don't set var annotation pointers.
        (remove_referenced_var): Ditto, and only remove it it's in the
        hash table.

        * tree-flow-inline.h (var_ann): Remove.
        * tree-flow.h (struct var_ann_d, var_ann_t): Remove.

        * tree-inline.c (remapped_type): Remove.
        (can_be_nonlocal): Most variable will be considered live here,
        return false earlier.
        (remap_decls): Don't call var_ann, all variables will be considered
        referenced here.
        (copy_debug_stmt): Ditto, and use is_global_var.

        * tree-into-ssa.c (rewrite_debug_stmt_uses): Use get_current_def to
        determine if a variable was referred to, not var_ann.
        * tree-ssa-live.c (remove_unused_scope_block_p): Don't check var_ann.
        (remove_unused_locals): Ditto.
        * tree-ssa.c (delete_tree_ssa): Don't free/clear var ann pointers.
        * tree-tailcall.c (arg_needs_copy_p): Don't check var_ann.
        * tree.c (copy_node_stat): Don't clear var ann pointer.
        * tree.h (tree_result_decl, tree_parm_decl, tree_var_decl): Remove
        ann member.
        (DECL_VAR_ANN_PTR): Remove.

2012-08-01  Michael Matz  <matz@suse.de>

        * tree-flow.h (struct var_ann_d): Rename used member.
        (set_is_used): Don't declare.
        * tree-flow-inline.h (clear_is_used): Remove.
        (set_is_used, is_used_p): Move to ...
        * tree-ssa-live.c (set_is_used, is_used_p): ... here, and use
        on the side bitmap.
        (usedvars): New bitmap.
        (dump_scope_block): Don't dump unusedness.
        (remove_unused_locals): Allocate and free usedvars.
        * tree-nrv.c (tree_nrv): Don't clear used flags here.

2012-08-01  Michael Matz  <matz@suse.de>

        * tree-flow.h (struct var_ann_d): Remove base_var_processed and
        base_index members.
        * tree-ssa-live.h (struct _var_map): Remove basevars member.
        (VAR_ANN_BASE_INDEX): Remove.
        * tree-ssa-live.c (var_map_base_init): Use a hash table instead
        of var annotation to compress index space.  Don't deal with above
        removed members.
        (var_map_base_fini): Don't free basevars.
        (init_var_map): Don't clear basevars.

2012-08-01  Bill Schmidt  <wschmidt@linux.ibm.com>

        * gimple-ssa-strength-reduction.c (struct slsr_cand_d): Change
        base_name to base_expr.
        (struct cand_chain_d): Likewise.
        (base_cand_hash): Likewise.
        (base_cand_eq): Likewise.
        (record_potential_basis): Likewise.
        (alloc_cand_and_find_basis): Likewise.
        (create_mul_ssa_cand): Likewise.
        (create_mul_imm_cand): Likewise.
        (create_add_ssa_cand): Likewise.
        (create_add_imm_cand): Likewise.
        (slsr_process_cast): Likewise.
        (slsr_process_copy): Likewise.
        (dump_candidate): Likewise.
        (base_cand_dump_callback): Likewise.
        (unconditional_cands_with_known_stride_p): Likewise.
        (cand_increment): Likewise.

2012-08-01  Bill Schmidt  <wschmidt@linux.ibm.com>

        PR tree-optimization/46556
        * gimple-ssa-strength-reduction.c (enum cand_kind): Add CAND_REF.
        (base_cand_map): Change to hash table.
        (base_cand_hash): New function.
        (base_cand_free): Likewise.
        (base_cand_eq): Likewise.
        (lookup_cand): Change base_cand_map to hash table.
        (find_basis_for_candidate): Likewise.
        (base_cand_from_table): Exclude CAND_REF.
        (restructure_reference): New function.
        (slsr_process_ref): Likewise.
        (find_candidates_in_block): Call slsr_process_ref.
        (dump_candidate): Handle CAND_REF.
        (base_cand_dump_callback): New function.
        (dump_cand_chains): Change base_cand_map to hash table.
        (replace_ref): New function.
        (replace_refs): Likewise.
        (analyze_candidates_and_replace): Call replace_refs.
        (execute_strength_reduction): Change base_cand_map to hash table.

2012-08-01  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (ix86_address_subreg_operand): Reject
        stack pointer.
        (ix86_print_operand_address): Assert that parts.base and parts.index
        are non-NULL after call to simplify_subreg.

2012-08-01  Richard Guenther  <rguenther@suse.de>

        * doc/tree-ssa.texi: Remove pieces mentioning mark_sym_for_renaming.

2012-08-01  Richard Guenther  <rguenther@suse.de>

        * graphite-clast-to-gimple.c (translate_clast_user): Rename
        virtual operands.
        * sese.c (graphite_copy_stmts_from_block): Do not rename virtual
        operands here.
        * tree-call-cdce.c (tree_call_cdce): Use
        mark_virtual_operands_for_renaming.
        * tree-eh.c (sink_clobbers): Simplify.
        * tree-flow.h (mark_sym_for_renaming): Remove.
        (mark_virtual_operands_for_renaming): New function.
        * tree-if-conv.c (tree_if_conversion): Use
        mark_virtual_operands_for_renaming.
        * tree-inline.c (update_ssa_across_abnormal_edges): Likewise.
        * tree-into-ssa.c (mark_sym_for_renaming): Remove.
        (mark_virtual_operands_for_renaming): New function.
        * tree-loop-distribution.c (tree_loop_distribution): Use
        mark_virtual_operands_for_renaming.
        * tree-ssa-dce.c (mark_virtual_operand_for_renaming): Do not
        update stmts, use mark_virtual_operands_for_renaming.
        * tree-ssa-tail-merge.c (release_last_vdef): Remove.
        (replace_block_by): Adjust.
        (tail_merge_optimize): Use mark_virtual_operands_for_renaming.
        * tree-tailcall.c (tree_optimize_tail_calls_1): Use
        mark_virtual_operands_for_renaming.
        * tree-vect-slp.c (vect_slp_transform_bb): Likewise.
        * tree-vectorizer.c (vectorize_loops): Likewise.

2012-08-01  Richard Guenther  <rguenther@suse.de>

        * tree-flow.h (struct gimple_df): Remove syms_to_rename member,
        add ssa_renaming_needed and rename_vops flags.
        (SYMS_TO_RENAME): Remove.
        (symbol_marked_for_renaming): Likewise.
        (mark_virtual_ops_for_renaming): Likewise.
        * tree-into-ssa.c (symbols_to_rename_set, symbols_to_rename):
        New globals.
        (mark_for_renaming, marked_for_renaming): New functions.
        (symbol_marked_for_renaming): Remove.
        (dump_currdefs): Adjust.
        (maybe_replace_use): Likewise.
        (maybe_replace_use_in_debug_stmt): Likewise.
        (maybe_register_def): Likewise.
        (rewrite_update_phi_arguments): Likewise.
        (rewrite_update_enter_block): Likewise.
        (fini_ssa_renamer): Clear update SSA status here ...
        (delete_update_ssa): ... not here.  Free rename set.
        (prepare_block_for_update): Compute which decls need renaming.
        (dump_update_ssa): Adjust.
        (mark_sym_for_renaming): Adjust update SSA status for virtuals.
        (need_ssa_update_p): Adjust.
        (insert_updated_phi_nodes_for): Likewise.
        (update_ssa): Likewise.
        * tree-ssa-operands.c (finalize_ssa_defs): Adjust update SSA status
        for virtual and real operands.
        (finalize_ssa_uses): Likewise.
        * tree-ssanames.c (init_ssanames): Adjust.
        * tree-ssa.c (maybe_rewrite_mem_ref_base, maybe_optimize_var,
        execute_update_addresses_taken): Add bitmap to keep track of which
        candidates are suitable for rewriting and later renaming by SSA update.
        * matrix-reorg.c (transform_access_sites): Do not rename all defs.
        * tree-dfa.c (make_rename_temp): Do not mark real operands for
        renaming.
        * cgraphunit.c (assemble_thunk): Likewise.
        * gimplify.c (gimple_regimplify_operands): Likewise.
        (force_gimple_operand_1): Likewise.
        * ipa-prop.c (ipa_modify_formal_parameters): Likewise.
        * tree-inline.c (declare_return_variable): Likewise.
        * tree-parloops.c (separate_decls_in_region_stmt): Do not call
        mark_virtual_ops_for_renaming.
        (create_stores_for_reduction): Likewise.
        (create_loads_and_stores_for_name): Likewise.
        * tree-predcom.c (mark_virtual_ops_for_renaming): Remove.
        (initialize_root_vars_lm): Do not call mark_virtual_ops_for_renaming.
        (execute_load_motion): Likewise.
        (remove_stmt): Likewise.
        (execute_pred_commoning_chain): Likewise.
        * tree-sra.c (create_access_replacement): Do not rename real operands.
        (get_unrenamed_access_replacement): Unify with ...
        (get_access_replacement): ... this.
        (get_repl_default_def_ssa_name): Adjust.
        * tree-ssa-loop-im.c (move_computations_stmt): Manually update
        virtual SSA form.
        (rewrite_mem_ref_loc): Do not call mark_virtual_ops_for_renaming.
        * tree-ssa-loop-prefetch.c (emit_mfence_after_loop): Likewise.

2012-07-31  DJ Delorie  <dj@redhat.com>

        * config/s390/s390.c (s390_option_override): Disable DWARF 3/4
        extensions for TPF, unless specifically selected.

2012-08-01  Alan Modra  <amodra@gmail.com>

        PR target/54131
        * config/rs6000/rs6000.c (mem_operand_gpr): Don't limit range
        of lo_sum offsets.  Comment.  Assert mode at least word size
        rather than bypassing powerpc64 word offset check.

2012-07-31  Bill Schmidt  <wschmidt@linux.ibm.com>

        * config/rs6000/rs6000.c (rs6000_builtin_vectorization_cost): Revise
        costs for vec_perm and vec_promote_demote down to more natural values.
        (struct _rs6000_cost_data): New data structure.
        (rs6000_density_test): New function.
        (rs6000_init_cost): Change to use rs6000_cost_data.
        (rs6000_add_stmt_cost): Likewise.
        (rs6000_finish_cost): Perform density test when vectorizing a loop.

2012-07-31  Steven Bosscher  <steven@gcc.gnu.org>

        * sched-vis.c (print_exp): Handle FMA explicitly.  Simplify handling
        of RTX_UNARY function-like operations.  Print unknown expression
        RTX classes as pseudo-functions.
        (print_pattern): Simplify return pattern printing.
        (dump_insn_slim): Print the value of notes as a pattern for proper
        printing of CFA notes.

2012-07-31  Dehao Chen  <dehao@google.com>

        * predict.c (tree_estimate_probability_driver): Normalize the
        loop when initializing the loop optimizer.

2012-07-31  Richard Guenther  <rguenther@suse.de>

        * tree-flow.h (struct var_ann_d): Remove need_phi_state
        and current_def members.
        * tree-into-ssa.c (struct def_blocks_d): Remove var member.
        (def_blocks): Remove.
        (struct var_info_d): New.
        (var_infos): New hashtable.
        (struct ssa_name_info): Add def_blocks member.
        (get_ssa_name_ann): Adjust.
        (get_var_info): New function.
        (get_phi_state, set_phi_state, get_current_def,
        set_current_def, get_def_blocks_for, find_def_blocks_for): Adjust.
        (insert_phi_nodes_compare_def_blocks): Rename to ...
        (insert_phi_nodes_compare_var_infos): ... this and adjust.
        (insert_phi_nodes): Adjust.
        (dump_tree_ssa, dump_tree_ssa_stats): Adjust.
        (def_blocks_hash, def_blocks_eq, def_blocks_free): Remove.
        (debug_def_blocks_r): Rename to ...
        (debug_var_infos_r): ... this and adjust.
        (var_info_hash): New function.
        (var_info_eq): Likewise.
        (rewrite_blocks): Adjust.
        (init_ssa_renamer): Likewise.
        (fini_ssa_renamer): Likewise.
        (delete_update_ssa): Likewise.
        (update_ssa): Likewise.
        * tree-ssanames.c (release_dead_ssa_names): Do not clear current defs.

2012-07-31  Bill Schmidt  <wschmidt@linux.ibm.com>

        PR tree-optimization/53773
        * tree-vectorizer.h (struct _loop_vec_info): Add operands_swapped.
        (LOOP_VINFO_OPERANDS_SWAPPED): New macro.
        * tree-vect-loop.c (new_loop_vec_info): Initialize
        LOOP_VINFO_OPERANDS_SWAPPED field.
        (destroy_loop_vec_info): Restore canonical form.
        (vect_is_slp_reduction): Set LOOP_VINFO_OPERANDS_SWAPPED field.
        (vect_is_simple_reduction_1): Likewise.

2012-07-31  Steven Bosscher  <steven@gcc.gnu.org>

        * sched-vis.c (dump_insn_slim): Print print_rtx_head at the
        start of each new line.
        * final.c (final_scan_insn): If the final dump is requested as
        slim RTL, dump slim RTL to the assembly file also.

2012-07-31  Andrey Belevantsev  <abel@ispras.ru>

        PR target/53975

        * sel-sched-ir.c (has_dependence_note_reg_use): Clarify comment.

        Revert
        2011-08-04  Sergey Grechanik  <mouseentity@ispras.ru>

        * sel-sched-ir.c (has_dependence_note_reg_use): Call ds_full_merge
        only if producer writes to the register given by regno.

2012-07-31  Nick Clifton  <nickc@redhat.com>

        * config/stormy16/stormy16.c (xstormy16_expand_prologue): Add
        support for reporting stack usage.

        * config/frv/frv.c (QUAD): Fix typo.
        (frv_expand_prologue): Report stack usage.

2012-07-31  Steven Bosscher  <steven@gcc.gnu.org>

        PR pch/53880
        * gengtype.c (struct walk_type_data): Add have_this_obj field.
        (walk_type): For functions that take a this_obj argument and
        that process fields with a GTY((length)) argument, write the
        test that write_types_local_process_field will write also at the
        head of the loop, effectively unswitching the loop.
        (write_func_for_structure, write_local_func_for_structure): Clear
        have_this_obj before calling walk_type.
        (write_local_func_for_structure): Set have_this_obj before walk_type.
        (write_array): Set have_this_obj for output of local pointer walking
        functions but not for marker functions.
        (write_types_local_process_field): Assert have_this_obj is set.

        * rtl.h (simplify_using_condition): Adjust prototype using bitmap
        from coretypes.h.

2012-07-30  Nathan Froyd  <froydnj@gcc.gnu.org>


        * defaults.h (GO_IF_MODE_DEPENDENT_ADDRESS): Delete.
        * targhooks.c (default_mode_dependent_address_p): Delete code
        for GO_IF_MODE_DEPENDENT_ADDRESS.
        * system.h (GO_IF_MODE_DEPENDENT_ADDRESS): Poison.
        * doc/tm.texi.in (GO_IF_MODE_DEPENDENT_ADDRESS): Delete documention.
        * doc/tm.texi: Regenerate.
        * config/alpha.h (GO_IF_MODE_DEPENDENT_ADDRESS): Move code to...
        * config/alpha.c (alpha_mode_dependent_address_p): ...here.  New
        function.
        (TARGET_MODE_DEPENDENT_ADDRESS_P): Define.
        * config/cr16/cr16.h (GO_IF_MODE_DEPENDENT_ADDRESS): Delete.
        * config/mep/mep.h (GO_IF_MODE_DEPENDENT_ADDRESS): Delete.
        * config/vax/vax-protos.h (vax_mode_dependent_address_p): Delete.
        * config/vax/vax.h (GO_IF_MODE_DEPENDENT_ADDRESS): Delete.
        * config/vax/vax.c (vax_mode_dependent_address_p): Make static.
        Take a const_rtx.
        (TARGET_MODE_DEPENDENT_ADDRESS_P): Define.

2012-07-30  Nathan Froyd  <froydnj@gcc.gnu.org>

        * expmed.h (NUM_MODE_VECTOR_INT): Define.
        (struct expmed_op_cheap, struct expmed_op_costs): New structures.
        (struct target_expmed): Convert x_mul_highpart_cost and
        x_mul_widen_cost fields to be indexed by integer modes.
        Convert x_sdiv_pow2_cheap and x_smod_pow2_cheap fields to be
        of type struct expmed_op_cheap.  Convert other cost fields to be
        of type struct_expmed_op_costs.
        (mul_widen_cost_ptr, mul_highpart_cost_ptr): Adjust for new
        indexing of respective fields.
        (expmed_op_cheap_ptr): New function.
        (sdiv_pow2_cheap_ptr, smod_pow2_cheap_ptr): Call it.
        (expmed_op_cost_ptr): New function.
        (add_cost_ptr, neg_cost_ptr, shift_cost_ptr, shiftadd_cost_ptr,
        shiftsub0_cost_ptr, shiftsub1_cost_ptr, mul_cost_ptr,
        sdiv_cost_ptr, udiv_cost_ptr): Call it.

2012-07-30  Sandra Loosemore  <sandra@codesourcery.com>
            Julian Brown  <julian@codesourcery.com>

        * doc/invoke.texi (MIPS Options): Document -mno-float.
        * config/mips/mips.h (MIPS_ARCH_FLOAT_SPEC): Make it know
        about -mno-float.

2012-07-30  Joseph Myers  <joseph@codesourcery.com>

        * doc/sourcebuild.texi (Subdirectories): Document common subdirectory.

2012-07-30  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        PR middle-end/53823
        * expmed.c (expand_mult): Skip synth_mult for constant double op1 except
        for special cases.  Don't initialize coeff and is_neg.

2012-07-30  Ulrich Weigand  <ulrich.weigand@linaro.org>
            Richard Earnshaw  <rearnsha@arm.com>

        * target.def (vector_alignment): New target hook.
        * doc/tm.texi.in (TARGET_VECTOR_ALIGNMENT): Document new hook.
        * doc/tm.texi: Regenerate.
        * targhooks.c (default_vector_alignment): New function.
        * targhooks.h (default_vector_alignment): Add prototype.
        * stor-layout.c (layout_type): Use targetm.vector_alignment.
        * config/arm/arm.c (arm_vector_alignment): New function.
        (TARGET_VECTOR_ALIGNMENT): Define.

        * tree-vect-data-refs.c (vect_update_misalignment_for_peel): Use
        vector type alignment instead of size.
        * tree-vect-loop-manip.c (vect_do_peeling_for_loop_bound): Use
        element type size directly instead of computing it from alignment.
        Fix variable naming and comment.

2012-07-30  Kirill Yukhin  <kirill.yukhin@intel.com>
            Michael Zolotukhin  <michael.v.zolotukhin@intel.com>

        * common/config/i386/i386-common.c (OPTION_MASK_ISA_RDSEED_SET): New.
        (OPTION_MASK_ISA_RDSEED_UNSET): Likewise.
        (ix86_handle_option): Handle mrdseed option.
        * config.gcc (i[34567]86-*-*): Add rdseedintrin.h.
        (x86_64-*-*): Likewise.
        * config/i386/prfchwintrin.h: New header.
        * config/i386/cpuid.h (bit_RDSEED): New.
        * config/i386/driver-i386.c (host_detect_local_cpu): Detect
        RDSEED support.
        * config/i386/i386-c.c: Define __RDSEED__ if needed.
        * config/i386/i386.c (ix86_target_string): Define -mrdseed option.
        (PTA_RDSEED): New.
        (ix86_option_override_internal): Handle new option.
        (ix86_valid_target_attribute_inner_p): Add OPT_mrdseed.
        (ix86_builtins): Add enum entries for RDSEED* builtins.
        (ix86_init_mmx_sse_builtins): Define new builtins.
        (ix86_expand_builtin): Expand RDSEED* builtins.
        * config/i386/i386.h (TARGET_RDSEED): New.
        * config/i386/i386.md (rdseed<mode>_1): New.
        * config/i386/i386.opt (mrdseed): New.
        * config/i386/x86intrin.h: Include rdseedintrin.h.

2012-07-30  Richard Guenther  <rguenther@suse.de>

        * tree-into-ssa.c (mark_def_sites): Also process virtual operands.
        (rewrite_stmt): Likewise.
        (rewrite_enter_block): Likewise.
        (pass_build_ssa): Do not update virtual SSA form during TODO.
        (mark_symbol_for_renaming): Do nothing if we are not in SSA form.
        * lto-streamer-in.c (lto_read_body): Set in_ssa_p earlier.

2012-07-30  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/39423
        * config/sh/sh.md (*movsi_index_disp, *movhi_index_disp): New
        insns.

2012-07-30  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/51244
        * config/sh/sh.md (mov_neg_si_t): Move to Scc instructions section.
        Use t_reg_operand predicate.  Add split for negated case.
        (ashrsi2_31): Pass get_t_reg_rtx to gen_mov_neg_si_t.
        * config/sh/sh.c (expand_ashiftrt): Likewise.

2012-07-30  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54089
        * config/sh/sh.md (ashlsi3_d): Invoke gen_shifty_op directly instead
        of trying to emit ashlsi3_n.

2012-07-30  Laurynas Biveinis  <laurynas.biveinis@gmail.com>
            Steven Bosscher  <steven@gcc.gnu.org>

        * gengtype.c (adjust_field_type): Diagnose duplicate "length"
        option applications and option being applied to arrays of atomic types.
        (walk_type): Allow "atomic" option on strings too.
        * dwarf2out.h (struct dw_vec_struct): Use the "atomic" GTY option
        for the array field.
        * vec.h: Describe the atomic object "A" type of the macros in
        the header comment.
        (VEC_T_GTY_ATOMIC, DEF_VEC_A, DEF_VEC_ALLOC_A): Define.
        * emit-rtl.c (locations_locators_vals): use the atomic object vector.
        * doc/gty.texi: Clarify that GTY option "length" is only for
        arrays of non-atomic objects.  Fix typo in the description of the
        "atomic" option.

2012-07-27  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (ix86_avoid_lea_for_addr): Handle
        zero-extended addresses.  Return false if the address has less
        than two components.
        (ix86_split_lea_for_addr): Unconditionally convert target and
        all address operands to requested mode.
        * config/i386/i386.md (*lea<mode>): Recover operands from curr_insn.
        Pass SImode to ix86_split_lea_for_addr when splitting zero-extended
        address.
        (zero-extended add splitter): New splitter to conditionally split
        non-destructive adds.
        (*zero_extendsidi2_rex64): Conditionally emit leal instead of movl.

2012-07-28  Alan Modra  <amodra@gmail.com>

        PR target/54093
        * config/rs6000/rs6000.c (rs6000_secondary_reload): Limit 32-bit
        multi-gpr reload to cases where predicate passes.  Do the same for
        64-bit multi-gpr reload.

2012-07-27  Nathan Froyd  <froydnj@gcc.gnu.org>

        * expmed.h (alg_hash, alg_hash_used_p, sdiv_pow2_cheap,
        smod_pow2_cheap, zero_cost, add_cost, neg_cost, shift_cost)
        shiftadd_cost, shiftsub0_cost, shiftsub1_cost, mul_cost,
        sdiv_cost, udiv_cost, mul_widen_cost, mul_highpart_cost): Delete
        macro definitions and re-purpose as inline functions.
        (alg_hash_entry_ptr, set_alg_hash_used_p, sdiv_pow2_cheap_ptr,
        set_sdiv_pow2_cheap, smod_pow2_cheap_ptr, set_smod_pow2_cheap,
        zero_cost_ptr, set_zero_cost, add_cost_ptr, set_add_cost,
        neg_cost_ptr, set_neg_cost, shift_cost_ptr, set_shift_cost,
        shiftadd_cost_ptr, set_shiftadd_cost, shiftsub0_cost_ptr,
        set_shiftsub0_cost, shiftsub1_cost_ptr, set_shiftsub1_cost,
        mul_cost_ptr, set_mul_cost, sdiv_cost_ptr, set_sdiv_cost,
        udiv_cost_ptr, set_udiv_cost, mul_widen_cost_ptr,
        set_mul_widen_cost, mul_highpart_cost_ptr, set_mul_highpart_cost):
        New functions.
        (convert_cost_ptr): New function, split out from...
        (set_convert_cost, convert_cost): ...here.
        * expmed.c, tree-ssa-loop-ivopts.c: Update for new functions.
        * gimple-ssa-strength-reduction.c: Likewise.

2012-07-20  Ryan Mansfield  <rmansfield@qnx.com>

        * gcc.c (main): Move GCC_DRIVER_HOST_INITIALIZATION after
        diagnostic_initialize.

2012-07-27  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54089
        * config/sh/sh.c (shiftcosts): Remove case where first operand
        is a const_int.  Move COSTS_N_INSNS usage into caller ...
        (sh_rtx_costs) ... here.  Return false when shiftcosts cannot be
        calculated instead of MAX_COST.

2012-07-27  Richard Guenther  <rguenther@suse.de>

        * tree-cfg.c (gimple_can_merge_blocks_p): Do more fine-grained
        check whether SSA form is not up-to-date.
        * tree-flow.h (name_mappings_registered_p): Remove.
        * tree-into-ssa.c (struct repl_map_d): Remove.
        (repl_tbl): Likewise.
        (struct ssa_name_info): Add repl_set member.
        (update_ssa_obstack): New static global.
        (get_ssa_name_ann): Initialize repl_set.
        (clear_ssa_name_info): Assert age did not wrap.
        (repl_map_hash, repl_map_eq, repl_map_free): Remove.
        (names_replaced_by): Adjust.
        (add_to_repl_tbl): Likewise.
        (dump_tree_ssa_stats): Likewise.
        (init_update_ssa): Initialize update_ssa_obstack.
        (delete_update_ssa): Free update_ssa_obstack.
        (name_mappings_registered_p): Remove.
        (update_ssa): Adjust.

2012-07-27  Segher Boessenkool  <segher@kernel.crashing.org>

        * config/rs6000/constraints.md: Delete "q" constraint.
        * config/rs6000/dfp.md (movsd_hardfloat, movsd_softfloat):
        Delete the "q" alternative.
        * config/rs6000/predicates.md (gpc_reg_operand): Adjust.
        * config/rs6000/rs6000.c (rs6000_debug_reg_global)
        (rs6000_init_hard_regno_mode_ok, rs6000_dbx_register_number):
        adjust to MQ_REGNO removal.
        * config/rs6000/rs6000.h (FIRST_PSEUDO_REGISTER): Adjust
        comment.
        (REG_ALLOC_ORDER): Adjust comment.  Remove MQ from alloc order.
        (enum reg_class): Adjust comment.  Delete MQ_REGS.
        (REG_CLASS_CONTENTS): Adjust.
        (REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): Adjust comment.
        * config/rs6000/rs6000.md: Delete MQ_REGNO.
        (movsi_internal1, movsi_internal1_single, movhi_internal,
        movqi_internal, movcc_internal1, movsf_hardfloat,
        movsf_softfloat): Delete the "q" alternative.
        (ctr<mode>_internal1, ctr<mode>_internal2, ctr<mode>_internal5,
        ctr<mode>_internal6): Delete "q" constraint.

2012-07-27  Richard Guenther  <rguenther@suse.de>

        * tree-into-ssa.c (def_blocks_p): New typedef.
        (insert_phi_nodes_compare_def_blocks): New function.
        (insert_phi_nodes): Do not walk over referenced vars, instead
        walk over recorded def_blocks, record relevant ones and sort
        them to avoid repeated hashtable lookups.

2012-07-27  Richard Guenther  <rguenther@suse.de>

        * doc/invoke.texi (min-virtual-mappings, virtual-mappings-ratio):
        Remove param documentation.
        * params.def (PARAM_MIN_VIRTUAL_MAPPINGS,
        PARAM_VIRTUAL_MAPPINGS_TO_SYMS_RATIO): Remove.
        * tree-flow.h (mark_set_for_renaming): Remove.
        * tree-into-ssa.c (struct update_ssa_stats_d): Remove.
        (add_new_name_mapping): Remove bookkeeping code.
        (dump_update_ssa): Remove stats dumping code.
        (init_update_ssa): Remove stats allocation code.
        (delete_update_ssa): Remove stats freeing code.
        (mark_set_for_renaming): Remove.
        (switch_virtuals_to_full_rewrite_p): Likewise.
        (switch_virtuals_to_full_rewrite): Likewise.
        (update_ssa): Do not call switch_virtuals_to_full_rewrite.

2012-07-27  Marek Polacek  <polacek@redhat.com>

        * cgraphunit.c: Rename varpool_finalize_variable to
        varpool_finalize_decl in a comment.

2012-07-27  Segher Boessenkool  <segher@kernel.crashing.org>

        * common/config/rs6000/rs6000-common.c (rs6000_handle_option):
        Delete code for -mno-power, -mpower, and -mpower2.
        * config/rs6000/aix43.h (NON_POWERPC_MASKS): Delete.
        (SUBTARGET_OVERRIDE_OPTIONS): Delete check for POWER together
        with -maix64.
        (ASM_CPU_SPEC): Delete support for POWER and POWER2.
        * config/rs6000/aix51.h (NON_POWERPC_MASKS): Delete.
        (SUBTARGET_OVERRIDE_OPTIONS): Delete check for POWER together
        with -maix64.
        (ASM_CPU_SPEC): Delete support for POWER and POWER2.
        * config/rs6000/aix52.h (NON_POWERPC_MASKS): Delete.
        (SUBTARGET_OVERRIDE_OPTIONS): Delete check for POWER together
        with -maix64.
        (TARGET_POWER): Delete.
        * config/rs6000/aix53.h (NON_POWERPC_MASKS): Delete.
        (SUBTARGET_OVERRIDE_OPTIONS): Delete check for POWER together
        with -maix64.
        (TARGET_POWER): Delete.
        * config/rs6000/aix61.h (NON_POWERPC_MASKS): Delete.
        (SUBTARGET_OVERRIDE_OPTIONS): Delete check for POWER together
        with -maix64.
        (TARGET_POWER): Delete.
        * config/rs6000/darwin.h (TARGET_POWER): Delete.
        * config/rs6000/driver-rs6000.c (struct asm_names): Delete
        support for -mpower, -mpower2, and -mno-power.
        * config/rs6000/rs6000-c.c (rs6000_target_modify_macros):
        Likewise.
        (rs6000_cpu_cpp_builtins): Likewise.
        * config/rs6000/rs6000-cpus.def: Likewise.
        * config/rs6000/rs6000-tables.opt: Regenerate.
        * config/rs6000/rs6000.c (POWER_MASKS): Delete.
        (rs6000_option_override_internal): Adjust.
        (rs6000_conditional_register_usage): Adjust.
        (rs6000_emit_move): Adjust.
        (rs6000_common_init_builtins): Adjust.
        (rs6000_init_libfuncs): Adjust.
        (rs6000_output_function_prologue): Adjust.
        (rs6000_adjust_cost): Adjust.
        (struct rs6000_opt_masks): Delete MASK_POWER and MASK_POWER2.
        * config/rs6000/rs6000.h (ASM_CPU_SPEC): Delete support for
        POWER and POWER2.
        (TARGET_DEFAULT): Adjust.
        (PROCESSOR_POWER): Delete.
        (SHIFT_COUNT_TRUNCATED): Adjust.
        * config/rs6000/rs6000.md (extendqisi2): Delete POWER support.
        (extendqisi2_power): Delete.
        (extendqisi2_no_power): Adjust.
        (extendqihi2, extendqihi2_power, extendqihi2_no_power):
        Likewise.
        (sminsi3, smaxsi3, uminsi3, umaxsi3): Adjust.
        (anonymous doz insn patterns): Delete.
        (abssi2): Adjust.
        (abssi2_power): Delete.
        (abssi2_nopower): Adjust.
        (nabs_power, nabs_nopower): Likewise.
        (mulsi3, mulsi3_mq, mulsi3_no_mq, mulsi3_mq_internal1):
        Likewise.  Delete anonymous post-reload splitter.
        (mulsi3_no_mq_internal1): rename to...
        (mulsi3_internal1): New define_insn.
        (mulsi3_mq_internal2, mulsi3_no_mq_internal2, mulsi3_internal2):
        Likewise.
        (divmodsi4, divmodsi4_internal, udiv<mode>3, udivsi3_mq,
        udivsi3_no_mq, udivsi3, div<mode>3, divsi3_mq, div<mode>3_no_mq,
        udivmodsi4_normal, udivmodsi4_tests, udivmodsi4): Likewise.
        (mulh_call, mull_call, divss_call, divus_call, quoss_call,
        quous_call): Likewise.
        (maskir_internal1, maskir_internal2, maskir_internal3,
        maskir_internal4, maskir_internal5, maskir_internal6,
        maskir_internal7, maskir_internal8): Delete.
        (ashlsi3, ashlsi3_power, ashlsi3_no_power): Adjust.
        (anonymous sl insn patterns): Delete.
        (lshrsi3, lshrsi3_power, lshrsi3_no_power): Adjust.
        (lshrsi3_64): Adjust.
        (anonymous sr insn patterns): Delete.
        (anonymous rrib insn patterns): Delete.
        (ashrsi3, ashrsi3_power, ashrsi3_no_power): Adjust.
        (anonymous sra insn patterns): Delete.
        (sqrtsf2, sqrtdf2, sqrtdf2_fpr): Adjust.
        (fix_trunc<mode>si2, fix_trunc<mode>si2_internal,
        fctiwz_<mode>): Adjust.
        (mulsidi3, mulsidi3_mq, mulsidi3_no_mq, umulsidi3, umulsidi3_mq,
        umulsidi3_no_mq, smulsi3_highpart, smulsi3_highpart_mq,
        smulsi3_highpart_no_mq, umulsi3_highpart, umulsi3_highpart_mq,
        umulsi3_highpart_no_mq): Adjust.
        (ashldi3_power, lshrdi3_power, ashrdi3_power): Delete.
        (ashrdi3_no_power, ashldi3, ashldi3_internal1,
        lshrdi3_internal1): Adjust.
        (fix_trunctfsi2, fix_trunctfsi2_fprs): Adjust.
        (movti_power): Delete.
        (movti_string): Adjust.
        (stmsi8, stmsi7, stmsi6, stmsi5, stmsi4, stmsi3): Adjust.
        (stmsi8_power, stmsi7_power, stmsi6_power, stmsi5_power,
        stmsi4_power, stmsi3_power): Delete.
        (anonymous movmemsi insn patterns): Adjust.
        (lfq_power2, stfq_power2): Delete.
        (eq<mode>, eq<mode>_compare): Adjust.
        (eqsi_power): Delete.
        (ne0si): Adjust.
        (anonymous le, lt, ge, gt insn patterns): Delete.
        * config/rs6000/rs6000.opt (mpower, mno-power, mpower2): Delete.
        * config/rs6000/sysv4.h (TARGET_POWER): Delete.
        * config/rs6000/t-aix43 (MULTILIB_OPTIONS, MULTILIB_DIRNAMES,
        MULTILIB_MATCHES): Adjust.
        * doc/invoke.texi (RS/6000 and PowerPC Options): Delete
        -mpower, -mno-power, -mpower2, -mno-power2 documentation.
        Delete -mcpu=power and -mcpu=power2 documentation.

2012-07-27  Segher Boessenkool  <segher@kernel.crashing.org>

        * config/rs6000/601.md: New file.
        * config/rs6000/aix43.h (ASM_CPU_SPEC): Delete support for
        RIOS CPUs.
        * config/rs6000/aix51.h (ASM_CPU_SPEC): Likewise.
        * config/rs6000/driver-rs6000.c (detect_processor_aix,
        struct asm_names): Likewise.
        * config/rs6000/rios1.md: Delete file.
        * config/rs6000/rios2.md: Delete file.
        * config/rs6000/rs6000-cpus.def: Delete definitions for RIOS
        CPUs.
        * config/rs6000/rs6000-opts.h (enum processor_type): Delete
        PROCESSOR_RIOS1 and PROCESSOR_RIOS2.
        * config/rs6000/rs6000-tables.opt: Regenerated.
        * config/rs6000/rs6000.c (struct rios1_cost, struct rios2_cost):
        Delete.
        (rs6000_option_override_internal): Delete support for RIOS CPUs.
        (rs6000_conditional_register_usage): Adjust comment.
        (rs6000_issue_rate):Delete support for RIOS CPUs.
        * config/rs6000/rs6000.h (ASM_CPU_SPEC): Delete support for
        RIOS CPUs.
        (PROCESSOR_POWER): Change to PROCESSOR_PPC601.
        (PROCESSOR_DEFAULT): Change to PROCESSOR_PPC603.
        * config/rs6000/rs6000.md (define_attr "cpu"): Delete rios1
        and rios2.
        (include "rios1.md", include "rios2.md"): Delete.
        (include "601.md"): New.
        * config/rs6000/rs6000.opt (enum rs6000_cpu): Default to
        PROCESSOR_PPC603.
        * config/rs6000/t-aix43 (MULTILIB_MATCHES): Delete support
        for RIOS CPUs.
        * config/rs6000/t-rs6000 (MD_INCLUDES): Delete rios1.md and
        rios2.md .  Add 601.md .

2012-07-26  Richard Henderson  <rth@redhat.com>

        * doc/extend.texi (attribute): Document hot/cold for labels.
        * predict.c (tree_estimate_probability_bb): Handle hot/cold
        attributes on user labels.
        * predict.def (PRED_HOT_LABEL, PRED_COLD_LABEL): New.

2012-07-26  Andrew Jenner  <andrew@codesourcery.com>
            Sandra Loosemore  <sandra@codesourcery.com>

        * cse.c (find_comparison_args): Check for cycles of any length.

2012-07-26  Nick Clifton  <nickc@redhat.com>

        * config/mn10300/mn10300.c (REG_SAVE_BYTES): Delete.
        (mn10300_get_live_callee_saved_regs): If requested return a count
        of the number of bytes in the mask.
        (mn10300_expand_prologue): Add argument to invocation of
        mn10300_get_live_callee_regs.
        (mn10300_expand_epilogue): Compute reg_save_bytes by calling
        mn10300_get_live_callee_saved_regs.
        (mn10300_initial_offset): Likewise.
        * config/mn10300/mn10300-protos.h (mn10300_get_live_callee_saved_regs):
        Update prototype.
        * config/mn10300/mn10300.md (return_ret): Add argument to
        invocation of mn10300_get_live_callee_saved_regs.

2012-07-26  Steven Bosscher  <steven@gcc.gnu.org>

        PR regression/54084
        * sel-sched-ir.c (cmp_v_in_regset_pool): Clarify logic, fix
        pointer difference check.

2012-07-26  Bill Schmidt  <wschmidt@linux.ibm.com>

        * tree-ssa-loop-ivopts.c (mbc_entry_hash): Remove.
        (mbc_entry_eq): Likewise.
        (mult_costs): Likewise.
        (cost_tables_exist): Likewise.
        (initialize_costs): Likewise.
        (finalize_costs): Likewise.
        (tree_ssa_iv_optimize_init): Remove call to initialize_costs.
        (add_regs_cost): Remove.
        (multiply_regs_cost): Likewise.
        (add_const_cost): Likewise.
        (extend_or_trunc_reg_cost): Likewise.
        (negate_reg_cost): Likewise.
        (struct mbc_entry): Likewise.
        (multiply_by_const_cost): Likewise.
        (get_address_cost): Change add_regs_cost calls to add_cost lookups;
        change multiply_by_const_cost to mult_by_coeff_cost.
        (force_expr_to_var_cost): Likewise.
        (difference_cost): Change multiply_by_const_cost to mult_by_coeff_cost.
        (get_computation_cost_at): Change add_regs_cost calls to add_cost
        lookups; change multiply_by_const_cost to mult_by_coeff_cost.
        (determine_iv_cost): Change add_regs_cost calls to add_cost lookups.
        (tree_ssa_iv_optimize_finalize): Remove call to finalize_costs.
        * tree-ssa-address.c (expmed.h): New #include.
        (most_expensive_mult_to_index): Change multiply_by_const_cost to
        mult_by_coeff_cost.
        * gimple-ssa-strength-reduction.c (expmed.h): New #include.
        (stmt_cost): Change to use mult_by_coeff_cost, mul_cost, add_cost,
        neg_cost, and convert_cost instead of IVOPTS interfaces.
        (execute_strength_reduction): Remove calls to initialize_costs and
        finalize_costs.
        * expmed.c (struct init_expmed_rtl): Add convert rtx_def.
        (init_expmed_one_mode): Initialize convert rtx_def; initialize
        x_convert_cost for related modes.
        (mult_by_coeff_cost): New function.
        * expmed.h (NUM_MODE_INT): New #define.
        (struct target_expmed): Add x_convert_cost matrix.
        (set_convert_cost): New inline function.
        (convert_cost): Likewise.
        (mult_by_coeff_cost): New extern decl.
        * tree-flow.h (initialize_costs): Remove decl.
        (finalize_costs): Likewise.
        (multiply_by_const_cost): Likewise.
        (add_regs_cost): Likewise.
        (multiply_regs_cost): Likewise.
        (add_const_cost): Likewise.
        (extend_or_trunc_reg_cost): Likewise.
        (negate_reg_cost): Likewise.
        * Makefile.in (gimple-ssa-strength-reduction.o): Update dependencies.
        (tree-ssa-address.o): Update dependencies.

2012-07-26  Steven Bosscher  <steven@gcc.gnu.org>

        * bitmap.h: Add explanation of sparse set as linked-list bitmap.
        * sbitmap.h: Add explanation about non-sparse sets as simple bitmap.
        (TEST_BIT): Make a static inline function for stronger type checking.
        (SET_BIT): Don't handle sbitmaps with popcount.
        (RESET_BIT): Likewise.
        (SET_BIT_WITH_POPCOUNT): New, like SET_BIT but with popcount.
        (RESET_BIT_WITH_POPCOUNT): New, like RESET_BIT but with popcount.
        * ebitmap.c (ebitmap_clear_bit): Use SET_BIT_WITH_POPCOUNT and
        RESET_BIT_WITH_POPCOUNT on wordmask bitmaps.
        (ebitmap_set_bit, ebitmap_and_into, ebitmap_and, ebitmap_ior_into,
        ebitmap_and_compl_into, ebitmap_and_compl): Likewise.
        * sparseset.h: Add explanation of sparse set representation.

2012-07-26  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/54098
        * tree-vrp.c (vrp_visit_phi_node): Iterate once more if the
        original range was UNDEFINED.

2012-07-26  Ramana Radhakrishnan  <ramana.radhakrishnan@linaro.org>

        * config/arm/neon.ml (ops): Fix regexp for vld1Q_dups64 and
        vld1Q_dupu64 tests.

2012-07-26  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/51244
        * config/sh/sh.opt (mzdcbranch): New option.
        * doc/invoke.texi: Document it.
        * config/sh/sh.md (negsi_cond): Use TARGET_ZDCBRANCH as condition
        instead of TARGET_HARD_SH4.
        * config/sh/sh.c (sh_option_override): Set TARGET_ZDCBRANCH as default
        for TARGET_HARD_SH4.

2012-07-25  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/54089
        * config/sh/predicates.md (shift_count_operand): Handle not-SHMEDIA
        case.
        (p27_shift_count_operand, not_p27_shift_count_operand): New predicates.
        * config/sh/sh.md (ashlsi3): Remove parallel and T_REG clobber
        from expander.  Do not emit shift insn for not-SHMEDIA case.
        (ashlsi3_std): Replace with ...
        (ashlsi3_k, ashlsi3_d): ... these new insns.
        * config/sh/sh.c (gen_ashift): Make static.  Add sanity checks.
        Emit ashlsi3_k insn instead of ashlsi3_std in ASHIFT case.
        (gen_ashift_hi): Make static.
        * config/sh/sh-protos.h (gen_ashift, gen_ashift_hi): Remove forward
        declaration.

2012-07-25  Bharathi Seshadri  <bseshadr@cisco.com>
            Jim Wilson  <jimwilso@cisco.com>

        * config/arm/bpabi.h (BE8_LINK_SPEC): Set according to
        TARGET_BIG_ENDIAN_DEFAULT.

2012-07-25  Eric Botcazou  <ebotcazou@adacore.com>

        * gimple-low.c (lower_try_catch): New function.
        (lower_stmt) <GIMPLE_TRY>: Use it to lower GIMPLE_TRY_CATCH.
        <GIMPLE_CATCH>: Delete.
        <GIMPLE_EH_FILTER>: Likewise.

2012-07-25  Eric Botcazou  <ebotcazou@adacore.com>

        * expr.c (expand_expr_real_1): Do not expand operand #1 and #2
        of BIT_FIELD_REF for ignored results.
        * fold-const.c (fold_ternary_loc) <BIT_FIELD_REF>: Check that the
        CONSTRUCTOR has vector type before using vector accessors on it.
        * gimplify.c (gimplify_compound_lval): Do not gimplify operand #1 and
        #2 of BIT_FIELD_REF.
        (gimplify_expr) <BIT_FIELD_REF>: Likewise.
        * tree-nested.c (convert_nonlocal_reference_op) <BIT_FIELD_REF>: Do
        not process operand #1 and #2.
        (convert_local_reference_op): Likewise.
        * tree-ssa-pre.c (create_component_ref_by_pieces_1): Remove superfluous
        breaks throughout.
        <BIT_FIELD_REF>: Reuse operand #1 and #2 directly.
        * tree.c (stabilize_reference) <BIT_FIELD_REF>: Do not stabilize
        operand #1 and #2.
        (UPDATE_FLAGS): Do not consider operand #2 of BIT_FIELD_REF.
        (build6_stat): Delete.
        * tree.h (build6_stat, build6, build6_stat_loc, build6_loc): Likewise.

2012-07-25 Marc Glisse <marc.glisse@inria.fr>

        PR tree-optimization/30318
        * tree-vrp.c (extract_range_from_binary_expr_1) [PLUS_EXPR]:
        Handle __int128.
        [MINUS_EXPR]: Merge with PLUS_EXPR.

2012-07-25  Sandra Loosemore  <sandra@codesourcery.com>
            Paul Brook  <paul@codesourcery.com>

        PR target/53633
        * target.def (warn_func_return): New hook.
        * doc/tm.texi.in (TARGET_WARN_FUNC_RETURN): New hook.
        * doc/tm.texi: Regenerate.
        * doc/sourcebuild.texi (Effective-Target Keywords): Document
        naked_functions.
        * ipa-pure-const.c (warn_function_noreturn): Check
        targetm.warn_func_return.
        * tree-cfg.c (execute_warn_function_return): Likewise.
        * config/spu/spu.c (spu_warn_func_return): New.
        (TARGET_WARN_FUNC_RETURN): Define.
        * config/rx/rx.c (rx_warn_func_return): New.
        (TARGET_WARN_FUNC_RETURN): Define.
        * config/avr/avr.c (avr_warn_func_return): New.
        (TARGET_WARN_FUNC_RETURN): Define.
        * config/arm/arm.c (arm_warn_func_return): New.
        (TARGET_WARN_FUNC_RETURN): Define.
        * config/mcore/mcore.c (mcore_warn_func_return): New.
        (TARGET_WARN_FUNC_RETURN): Define.
        (saved_warn_return_type, saved_warn_return_type_count): Remove.
        (mcore_reorg, mcore_handle_naked_attribute): Remove warn_return hack.

2012-07-25  Siddhesh Poyarekar  <siddhesh@redhat.com>

        * final.c [ASSEMBLER_DIALECT](do_assembler_dialects): New
        function to implement assembler dialects.
        (output_asm_insn): Use do_assembler_dialects.
        (asm_fprintf): Likewise.

2012-07-25  Richard Henderson  <rth@redhat.com>

        PR bootstrap/54092
        * libfuncs.h: Don't include optabs.h.
        (struct libfunc_entry): Use "int" for op, mode1, mode2 members.
        * optabs.c (hash_libfunc): Don't cast members to int.
        * Makefile.in (LIBFUNCS_H): Don't include OPTABS_H.

2012-07-25  Dodji Seketeli  <dodji@redhat.com>

        * basic-block.c: Fix typo in comment.

2012-07-25  Kirill Yukhin  <kirill.yukhin@intel.com>
            Michael Zolotukhin  <michael.v.zolotukhin@intel.com>

        * common/config/i386/i386-common.c (OPTION_MASK_ISA_PRFCHW_SET): New.
        (OPTION_MASK_ISA_PRFCHW_UNSET): Likewise.
        (ix86_handle_option): Handle mprfchw option.
        * config.gcc (i[34567]86-*-*): Add prfchwintrin.h.
        (x86_64-*-*): Likewise.
        * config/i386/prfchwintrin.h: New header.
        * config/i386/cpuid.h (bit_PRFCHW): New.
        (bit_BMI): Formatting fix.
        (bit_HLE): Likewise.
        (bit_RTM): Likewise.
        * config/i386/driver-i386.c (host_detect_local_cpu): Detect
        PREFETCHW support.
        * config/i386/i386-c.c: Define __PRFCHW__ if needed.
        * config/i386/i386.c (ix86_target_string): Define
        -mprfchw option. Formatting fixes.
        (PTA_HLE): Formatting fix.
        (PTA_PRFCHW): New.
        (ix86_option_override_internal): Handle new option.
        (ix86_valid_target_attribute_inner_p): Add OPT_mprfchw.
        * config/i386/i386.h (TARGET_PRFCHW): New.
        * config/i386/i386.md (prefetch): Enable for TARGET_PRFCHW.
        * config/i386/i386.opt (mprfchw): New.
        * config/i386/mm3dnow.h: Move _m_prefetchw from here to prfchwintrin.h.
        * config/i386/x86intrin.h: Include prfchwintrin.h.

2012-07-25 Sergey Melnikov <sergey.melnikov@intel.com>

        * config/i386/i386.md (stack_protect_set): Disable the pattern
        for Android since Android libc (bionic) does not provide random
        value for stack protection guard at gs:0x14. Guard value
        will be provided from external symbol (default implementation).
        (stack_protect_set_<mode>): Likewise.
        (stack_protect_test): Likewise.
        (stack_protect_test_<mode>): Likewise.
        * defaults.h: Define macro TARGET_HAS_BIONIC to 0 - target does
        not have Bionic by default
        * config/linux.h: Redefine macro TARGET_HAS_BIONIC to (OPTION_BIONIC)
        Macro OPTION_BIONIC is defined in this file and provides Bionic
        accessibility status

2012-07-25  Steven Bosscher  <steven@gcc.gnu.org>

        * gimple-pretty-print.c (gimple_dump_bb_buff): Call pp_flush.

2012-07-25  Venkataramanan Kumar  <venkataramanan.kumar@amd.com>

        btver2 Enablement
        * config.gcc (i[34567]86-*-linux* | ...): Add btver2.
        (case ${target}): Add btver2.
        * config/i386/driver-i386.c (host_detect_local_cpu): Let
        -march=native recognize btver2 processors.
        * config/i386/i386-c.c (ix86_target_macros_internal): Add
        btver2 def_and_undef
        * config/i386/i386.c (struct processor_costs btver2_cost): New
        btver2 cost table.
        (m_BTVER2): New definition.
        (m_AMD_MULTIPLE): Includes m_BTVER2.
        (initial_ix86_tune_features): Add btver2 tune.
        (processor_target_table): Add btver2 entry.
        (static const char *const cpu_names): Add btver2 entry.
        (software_prefetching_beneficial_p): Add btver2.
        (ix86_option_override_internal): Add btver2 instruction sets.
        (ix86_issue_rate): Add btver2.
        (ix86_adjust_cost): Add btver2.
        * config/i386/i386.h (TARGET_BTVER2): New definition.
        (enum target_cpu_default): Add TARGET_CPU_DEFAULT_btver2.
        (enum processor_type): Add PROCESSOR_BTVER2.
        * config/i386/i386.md (define_attr "cpu"): Add btver2.

2012-07-24  Bill Schmidt  <wschmidt@linux.ibm.com>

        * doc/tm.texi: Regenerate.
        * targhooks.c (default_init_cost): Add prologue and epilogue costs.
        (default_add_stmt_cost): Likewise; also handle NULL stmt_info.
        (default_finish_cost): Add prologue and epilogue costs.
        * targhooks.h (default_add_stmt_cost): Change parameter list.
        (default_finish_cost): Likewise.
        * target.def (init_cost): Change documentation string.
        (add_stmt_cost): Change documentation string and parameter list.
        (finish_cost): Likewise.
        * target.h (vect_cost_model_location): New enum.
        * tree-vectorizer.h (struct _slp_tree): Remove cost substruct.
        (struct _slp_instance): Remove cost substruct; rename stmt_cost_vec
        to body_cost_vec.
        (SLP_INSTANCE_OUTSIDE_OF_LOOP_COST): Remove.
        (SLP_INSTANCE_STMT_COST_VEC): Rename to SLP_INSTANCE_BODY_COST_VEC.
        (SLP_TREE_OUTSIDE_OF_LOOP_COST): Remove.
        (struct _vect_peel_extended_info): Rename stmt_cost_vec to
        body_cost_vec.
        (struct _stmt_vec_info): Remove cost substruct.
        (STMT_VINFO_OUTSIDE_OF_LOOP_COST): Remove.
        (stmt_vinfo_set_outside_of_loop_cost): Remove.
        (builtin_vectorization_cost): New function.
        (vect_get_stmt_cost): Change to use builtin_vectorization_cost.
        (add_stmt_cost): Change parameter list.
        (finish_cost): Likewise.
        (vect_model_simple_cost): Likewise.
        (vect_model_store_cost): Likewise.
        (vect_model_load_cost): Likewise.
        (record_stmt_cost): Likewise.
        (vect_get_load_cost): Likewise.
        (vect_get_known_peeling_cost): Likewise.
        * tree-vect-loop.c (vect_get_known_peeling_cost): Change parameter
        list; call record_stmt_cost for prologue and epilogue costs.
        (vect_estimate_min_profitable_iters): Call add_stmt_cost for
        prologue and epilogue costs; remove computation of vec_outside_cost;
        return vec_prologue_cost and vec_epilogue_cost from finish_cost.
        (vect_model_reduction_cost): Revise call to add_stmt_cost for body
        costs; call add_stmt_cost for prologue and epilogue costs.
        (vect_model_induction_cost): Revise call to add_stmt_cost for body
        costs; call add_stmt_cost for prologue costs.
        * tree-vect-data-refs.c (vect_get_data_access_cost): Change parameter
        list for function and arguments for calls to vect_get_load_cost and
        vect_get_store_cost.
        (vect_peeling_hash_get_lowest_cost): Change argument list for calls to
        vect_get_data_access_cost and vect_get_known_peeling_cost; use
        temporary vectors prologue_cost_vec and epilogue_cost_vec for the
        latter call and discard their results; rename stmt_cost_vec to
        body_cost_vec; correct possible storage leak for body_cost_vec.
        (vect_peeling_hash_choose_best_peeling): Rename stmt_cost_vec to
        body_cost_vec.
        (vect_enhance_data_refs_alignment): Rename stmt_cost_vec to
        body_cost_vec; add extra dummy parameter on calls to
        vect_get_data_access_cost; tolerate null si->stmt; add vect_body to
        argument list on call to add_stmt_cost.
        * tree-vect-stmts.c (record_stmt_cost): Change parameter list;
        rename stmt_cost_vec to body_cost_vec; tolerate null stmt_info; call
        builtin_vectorization_cost; add "where" parameter on call to
        add_stmt_cost.
        (vect_model_simple_cost): Change parameter list; call record_stmt_cost
        for prologue costs; remove call to stmt_vinfo_set_outside_of_loop_cost;
        rename stmt_cost_vec to body_cost_vec.
        (vect_model_promotion_demotion_cost): Add vect_body argument to call
        to add_stmt_cost; call add_stmt_cost for prologue costs; remove call
        to stmt_vinfo_set_outside_of_loop_cost.
        (vect_model_store_cost): Change parameter list; call record_stmt_cost
        for prologue costs; add vect_body argument to call to record_stmt_cost;
        rename stmt_cost_vec to body_cost_vec; remove call to
        stmt_vinfo_set_outside_of_loop_cost.
        (vect_get_store_cost): Rename stmt_cost_vec to body_cost_vec; add
        vect_body argument to calls to record_stmt_cost.
        (vect_model_load_cost): Change parameter list; rename stmt_cost_vec to
        body_cost_vec; add vect_body argument to calls to record_stmt_cost;
        remove call to stmt_vinfo_set_outside_of_loop_cost.
        (vect_get_load_cost): Change parameter list; rename stmt_cost_vec to
        body_cost_vec; add vect_body argument to calls to record_stmt_cost;
        call record_stmt_cost for prologue costs.
        (vectorizable_store): Change argument list for call to
        vect_model_store_cost.
        (vectorizable_load): Change argument list for call to
        vect_model_load_cost.
        (new_stmt_vec_info): Remove assignment to
        STMT_VINFO_OUTSIDE_OF_LOOP_COST.
        * config/spu/spu.c (spu_init_cost): Add prologue and epilogue costs.
        (spu_add_stmt_cost): Likewise; also handle NULL stmt_info.
        (spu_finish_cost): Add prologue and epilogue costs.
        * config/i386/i386.c (i386_init_cost): Add prologue and epilogue costs.
        (i386_add_stmt_cost): Likewise; also handle NULL stmt_info.
        (i386_finish_cost): Add prologue and epilogue costs.
        * config/rs6000/rs6000.c (rs6000_init_cost): Add prologue and epilogue
        costs.
        (rs6000_add_stmt_cost): Likewise; also handle NULL stmt_info.
        (rs6000_finish_cost): Add prologue and epilogue costs.
        * tree-vect-slp.c (vect_free_slp_instance): Rename
        SLP_INSTANCE_STMT_COST_VEC to SLP_INSTANCE_BODY_COST_VEC.
        (vect_create_new_slp_node): Remove assignment to
        SLP_TREE_OUTSIDE_OF_LOOP_COST.
        (vect_get_and_check_slp_defs): Change parameter list; change argument
        lists to calls to vect_model_store_cost and vect_model_simple_cost.
        (vect_build_slp_tree): Change parameter list; change argument lists
        to calls to vect_model_load_cost, vect_get_and_check_slp_defs, and
        recursive self-calls; remove setting of outside_cost from
        SLP_TREE_OUTSIDE_OF_LOOP_COST; add vect_body argument to call to
        record_stmt_cost.
        (vect_analyze_slp_instance): Rename stmt_cost_vec to body_cost_vec;
        rename SLP_INSTANCE_STMT_COST_VEC to SLP_INSTANCE_BODY_COST_VEC;
        remove assignment to SLP_INSTANCE_OUTSIDE_OF_LOOP_COST; record SLP
        prologue costs.
        (vect_bb_vectorization_profitable_p): Rename stmt_cost_vec to
        body_cost_vec; handle null ci->stmt; add vect_body argument to call
        to add_stmt_cost; simplify calls to targetm.vectorize.
        builtin_vectorization_cost; return vec_prologue_cost and
        vec_epilogue_cost from finish_cost.
        (vect_update_slp_costs_according_to_vf): Rename stmt_cost_vec to
        body_cost_vec; add vect_body argument to call to add_stmt_cost.

2012-07-24  Richard Henderson  <rth@redhat.com>

        * system.h (FIXUNS_TRUNC_LIKE_FIX_TRUNC): Poison.
        * config/cris/cris.h (FIXUNS_TRUNC_LIKE_FIX_TRUNC): Remove.
        * config/h8300/h8300.h (FIXUNS_TRUNC_LIKE_FIX_TRUNC): Remove.
        * config/mn10300/mn10300.h (FIXUNS_TRUNC_LIKE_FIX_TRUNC): Remove.
        * config/rs6000/rs6000.h (FIXUNS_TRUNC_LIKE_FIX_TRUNC): Remove
        comment reference.
        * config/v850/v850.h (FIXUNS_TRUNC_LIKE_FIX_TRUNC): Remove.
        * config/v850/v850.md (fixuns_truncsfsi2, fixuns_truncdfsi2): New.
        (fix_truncsfsi2, fix_truncdfsi2): Avoid double FIX.
        * config/vax/vax.h (FIXUNS_TRUNC_LIKE_FIX_TRUNC): Remove.
        * config/vax/vax.md (fixuns_trunc<VAXfp><VAXint>): New.
        * doc/tm.texi.in (FIXUNS_TRUNC_LIKE_FIX_TRUNC): Remove.
        * doc/tm.texi: Rebuild.

2012-07-24  Richard Henderson  <rth@redhat.com>

        * optabs.def: New file.
        * Makefile.in (OPTABS_H): Add insn-opinit.h.
        (MOSTLYCLEANFILES): Likewise.
        (insn-opinit.o): Remove reload.h
        (simple_rtl_generated_c): Remove insn-opinit.c.
        (s-opinit): New rule.
        (build/genopinit.o): Add optabs.def.
        * genopinit.c (rtx_upname): New.
        (optabs): Extract to optabs.def
        (enum optab_tag, struct optab_def_d, optabs): New.
        (struct pattern_d, patterns): New.
        (match_pattern): Split out from ...
        (gen_insn): ... here.  Push matches on patterns vec.
        (pattern_cmp, optab_kind_cmp, optab_rcode_cmp): New.
        (header_file_name, source_file_name, handle_arg): New.
        (open_outfile): New.
        (main): Sort and emit new tables.  Generate lookup_handler,
        raw_optab_handler, swap_optab_enable.
        * libfuncs.h (libfunc_entry): Change "size_t optab" to "optab op".
        * optabs.c (code_to_optab_): Remove.
        (hash_libfunc): Update for optab name change.
        (eq_libfunc): Likewise.
        (convert_optab_libfunc): Update computation of optab member;
        use the new convlib_def table.
        (optab_libfunc): Similarly.
        (set_optab_libfunc, set_conv_libfunc): Likewise.
        (sign_expand_binop): Use swap_optab_enable instead of fake optabs.
        (init_insn_codes, init_optab, init_optabv, init_convert_optab): Remove.
        (init_optabs): Don't call them; export the data to optabs.def.
        (gen_int_libfunc, gen_fp_libfunc): Export non-static.
        (gen_fixed_libfunc, gen_signed_fixed_libfunc): Likewise.
        (gen_unsigned_fixed_libfunc, gen_int_fp_libfunc): Likewise.
        (gen_intv_fp_libfunc, gen_int_fp_fixed_libfunc): Likewise.
        (gen_int_fp_signed_fixed_libfunc, gen_int_fixed_libfunc): Likewise.
        (gen_int_signed_fixed_libfunc): Likewise.
        (gen_int_unsigned_fixed_libfunc): Likewise.
        (gen_interclass_conv_libfunc, gen_int_to_fp_conv_libfunc): Likewise.
        (gen_ufloat_conv_libfunc): Likewise.
        (gen_int_to_fp_nondecimal_conv_libfunc): Likewise.
        (gen_fp_to_int_conv_libfunc, gen_intraclass_conv_libfunc): Likewise.
        (gen_trunc_conv_libfunc, gen_extend_conv_libfunc): Likewise.
        (gen_fract_conv_libfunc, gen_fractuns_conv_libfunc): Likewise.
        (gen_satfract_conv_libfunc, gen_satfractuns_conv_libfunc): Likewise.
        (debug_optab_libfuncs): Update for optab representation change.
        * optabs.h: Include insn-opinit.h.
        (optab, convert_optab, direct_optab): New typedefs.
        (struct optab_handlers, struct widening_optab_handlers): Remove.
        (struct optab_libcall_d): Rename from optab_d; remove code_,
        handlers, widening members.
        (struct convert_optab_libcall_d): Rename from convert_optab_d;
        remove code_ and handlers members.
        (enum optab_index, enum convert_optab_index): Remove.
        (enum direct_optab_index): Remove.
        (code_to_optab_): Fix array range.
        (optab_to_code): Covert to inline function.
        (optab_to_code_, convlib_def, normlib_def): Declare.
        (raw_optab_handler, swap_optab_enable): Declare.
        (unknown_optab): Remove; export to optabs.def
        (ssadd_optab, usadd_optab, sssub_optab, ussub_optab, ssmul_optab,
        usmul_optab, ssdiv_optab, usdiv_optab, ssneg_optab, usneg_optab,
        ssashl_optab, usashl_optab, add_optab, sub_optab, smul_optab,
        addv_optab, subv_optab, smul_highpart_optab, umul_highpart_optab,
        smul_widen_optab, umul_widen_optab, usmul_widen_optab,
        smadd_widen_optab, umadd_widen_optab, ssmadd_widen_optab,
        usmadd_widen_optab, smsub_widen_optab, umsub_widen_optab,
        ssmsub_widen_optab, usmsub_widen_optab, sdiv_optab, smulv_optab,
        sdivv_optab, sdivmod_optab, udiv_optab, udivmod_optab, smod_optab,
        umod_optab, fmod_optab, remainder_optab, ftrunc_optab, and_optab,
        ior_optab, xor_optab, ashl_optab, lshr_optab, ashr_optab, rotl_optab,
        rotr_optab, vashl_optab, vlshr_optab, vashr_optab, vrotl_optab,
        vrotr_optab, smin_optab, smax_optab, umin_optab, umax_optab, pow_optab,
        atan2_optab, fma_optab, fms_optab, fnma_optab, fnms_optab, mov_optab,
        movstrict_optab, movmisalign_optab, storent_optab, neg_optab,
        negv_optab, abs_optab, absv_optab, one_cmpl_optab, bswap_optab,
        ffs_optab, clz_optab, ctz_optab, clrsb_optab, popcount_optab,
        parity_optab, sqrt_optab, sincos_optab, sin_optab, asin_optab,
        cos_optab, acos_optab, exp_optab, exp10_optab, exp2_optab, expm1_optab,
        ldexp_optab, scalb_optab, significand_optab, logb_optab, ilogb_optab,
        log_optab, log10_optab, log2_optab, log1p_optab, floor_optab,
        ceil_optab, btrunc_optab, round_optab, nearbyint_optab, rint_optab,
        tan_optab, atan_optab, copysign_optab, signbit_optab, isinf_optab,
        cmp_optab, ucmp_optab, eq_optab, ne_optab, gt_optab, ge_optab,
        lt_optab, le_optab, unord_optab, strlen_optab, cbranch_optab,
        cmov_optab, cstore_optab, ctrap_optab, push_optab, addcc_optab,
        reduc_smax_optab, reduc_umax_optab, reduc_smin_optab, reduc_umin_optab,
        reduc_splus_optab, reduc_uplus_optab, ssum_widen_optab,
        usum_widen_optab, sdot_prod_optab, udot_prod_optab, vec_set_optab,
        vec_extract_optab, vec_init_optab, vec_shl_optab, vec_shr_optab,
        vec_realign_load_optab, vec_widen_umult_hi_optab,
        vec_widen_umult_lo_optab, vec_widen_smult_hi_optab,
        vec_widen_smult_lo_optab, vec_widen_umult_even_optab,
        vec_widen_umult_odd_optab, vec_widen_smult_even_optab,
        vec_widen_smult_odd_optab, vec_widen_ushiftl_hi_optab,
        vec_widen_ushiftl_lo_optab, vec_widen_sshiftl_hi_optab,
        vec_widen_sshiftl_lo_optab, vec_unpacks_hi_optab, vec_unpacks_lo_optab,
        vec_unpacku_hi_optab, vec_unpacku_lo_optab, vec_unpacks_float_hi_optab,
        vec_unpacks_float_lo_optab, vec_unpacku_float_hi_optab,
        vec_unpacku_float_lo_optab, vec_pack_trunc_optab, vec_pack_ssat_optab,
        vec_pack_usat_optab, vec_pack_sfix_trunc_optab,
        vec_pack_ufix_trunc_optab, powi_optab, sync_compare_and_swap_optab,
        sync_lock_test_and_set_optab, sync_old_add_optab, sync_old_sub_optab,
        sync_old_ior_optab, sync_old_and_optab, sync_old_xor_optab,
        sync_old_nand_optab, sync_new_add_optab, sync_new_sub_optab,
        sync_new_ior_optab, sync_new_and_optab, sync_new_xor_optab,
        sync_new_nand_optab, sext_optab, zext_optab, trunc_optab, sfix_optab,
        ufix_optab, sfixtrunc_optab, ufixtrunc_optab, sfloat_optab,
        ufloat_optab, lrint_optab, lround_optab, lfloor_optab, lceil_optab,
        fract_optab, fractuns_optab, satfract_optab, satfractuns_optab,
        vec_load_lanes_optab, vec_store_lanes_optab, vcond_optab, vcondu_optab,
        movcc_optab, reload_in_optab, reload_out_optab, movmem_optab,
        setmem_optab, cmpstr_optab, cmpstrn_optab, cmpmem_optab,
        sync_lock_release_optab, sync_add_optab, sync_sub_optab,
        sync_ior_optab, sync_and_optab, sync_xor_optab, sync_nand_optab,
        atomic_exchange_optab, atomic_compare_and_swap_optab,
        atomic_load_optab, atomic_store_optab, atomic_add_fetch_optab,
        atomic_sub_fetch_optab, atomic_and_fetch_optab,
        atomic_nand_fetch_optab, atomic_xor_fetch_optab, atomic_or_fetch_optab,
        atomic_fetch_add_optab, atomic_fetch_sub_optab, atomic_fetch_and_optab,
        atomic_fetch_nand_optab, atomic_fetch_xor_optab, atomic_fetch_or_optab,
        atomic_add_optab, atomic_sub_optab, atomic_and_optab,
        atomic_nand_optab, atomic_xor_optab, atomic_or_optab,
        atomic_always_lock_free_optab, atomic_is_lock_free_optab,
        atomic_thread_fence_optab, atomic_signal_fence_optab,
        vec_perm_optab, vec_perm_const_optab): Likewise.
        (struct target_optabs): Remove x_optab_table, x_convert_optab_table,
        and x_direct_optab_table members; add pat_enable.
        (optab_table, convert_optab_table, direct_optab_table): Remove.
        (optab_handler): Use raw_optab_handler.
        (widening_optab_handler, convert_optab_handler): Likewise.
        (set_optab_handler, set_widening_optab_handler): Remove.
        (set_convert_optab_handler, set_direct_optab_handler): Remove.
        (direct_optab_handler): Defer to optab_handler.
        * rtl.h (NON_GENERATOR_NUM_RTX_CODE): New.

2012-07-24  Jason Merrill  <jason@redhat.com>

        * bitmap.c (bitmap_descriptor): Adjust order of parameters to
        match MEM_STAT_DECL.
        * statistics.h (ALONE_FINAL_MEM_STAT_DECL): Correct typo.

2012-07-24  Richard Henderson  <rth@redhat.com>

        * optabs.h (struct optab_d): Rename code member to code_.
        (struct convert_optab_h): Likewise.
        (code_to_optab_): Rename from code_to_optab.
        (code_to_optab, optab_to_code): New.
        * dojump.c (do_compare_rtx_and_jump): Use code_to_optab.
        * ifcvt.c (noce_emit_move_insn): Likewise.
        * optabs.c (simplify_expand_binop): Use optab_to_code.
        (expand_simple_binop, shift_optab_p, commutative_optab_p): Likewise.
        (avoid_expensive_constant, expand_binop_directly): Likewise.
        (expand_binop, expand_simple_unop, expand_unop_direct): Likewise.
        (expand_unop, prepare_float_lib_cmp, expand_fixed_convert): Likewise.
        (have_insn_for, debug_optab_libfuncs): Likewise.
        (init_optab, init_optabv, init_convert_optab): Update for optab
        member name change.

        * libfuncs.h: Include optabs.h.
        * dwarf2out.c, lto-streamer.in.c: Don't include libfuncs.h.
        * Makefile.in (LIBFUNCS_H): Add OPTABS_H.
        (lto-streamer-in.o, dwarf2out.o): Update deps.

        * optabs.h (unknown_optab): New.
        * builtins.c (interclass_mathfn_icode): Use it.
        * dojump.c (do_compare_rtx_and_jump): Likewise.
        * optabs.c (optab_for_tree_code, expand_binop): Likewise.
        * tree-vect-generic.c (add_rshift, expand_vector_divmod): Likewise.
        (expand_vector_operations_1): Likewise.
        * tree-vect-patterns.c (vect_recog_divmod_pattern): Likewise.
        * tree-vect-stmts.c (supportable_narrowing_operation): Likewise.

2012-07-24  Steven Bosscher  <steven@gcc.gnu.org>

        * alloc-pool.c (create_alloc_pool): Fix ENABLE_CHECKING check.

2012-07-24  Ramana Radhakrishnan  <ramana.radhakrishnan@linaro.org>

        PR target/54051
        * config/arm/arm.c (arm_print_operand_address): Remove superfluous
        printing of 0.
        * config/arm/neon.md ("neon_vld3_lane<mode>":VD): Remove alignment
        specifier.
        ("neon_vld3_lane<mode>":VMQ): Likewise.
        ("neon_vld3_dup<mode>":VDX): Likewise.
        ("neon_vst3_lane<mode>":VD): Likewise.
        ("neon_vst3_lane<mode>":VMQ): Likewise.

2012-07-24  Roland McGrath  <mcgrathr@google.com>

        * arm.c (arm_get_frame_offsets): Don't use fixed regs for
        stack alignment padding.

2012-07-24  Uros Bizjak  <ubizjak@gmail.com>

        PR target/53961
        * config/i386/i386.c (ix86_legitimate_address_p): Move check for
        negative constant address for TARGET_X32 ...
        (ix86_decompose_address): ... here.  Reject constant addresses
        that don't satisfy x86_64_immediate_operand predicate.

2012-07-24  Julian Brown  <julian@codesourcery.com>

        * doc/sourcebuild.texi (arm_hf_eabi): Document effective-target check.

2012-07-24  Steven Bosscher  <steven@gcc.gnu.org>

        * sbitmap.h (SBITMAP_ELT_BITS): Use "1u" trick as for BITMAP_WORD_BITS.
        Move test to check that there is a popcount function for the the number
        of bits in SBITMAP_ELT_BITS to sbitmap.c.
        * sbitmap.c: Test SBITMAP_ELT_BITS, not HOST_BITS_PER_WIDEST_FAST_INT.
        MEM_STAT_INFO): Define in terms of their ALONE counterparts.

        * configure.ac (GATHER_STATISTICS): Always define, non-zero if enabled.
        * configure: Regenerate.
        * statistics.h (GATHER_STATISTICS): Error out if it is not defined.
        (GCC_MEM_STAT_ARGUMENTS): New define.
        (ALONE_MEM_STAT_DECL): Define in terms of GCC_MEM_STAT_ARGUMENTS.
        (ALONE_FINAL_MEM_STAT_DECL, ALONE_FINAL_PASS_MEM_STAT): New defines.
        (MEM_STAT_DECL, FINAL_MEM_STAT_DECL, PASS_MEM_STAT,
        FINAL_PASS_MEM_STAT): Define.
        * ggc-internal.h (ggc_record_overhead): Use FINAL_MEM_STAT_DECL.
        * ggc.h (ggc_record_overhead, ggc_free_overhead,
        ggc_prune_overhead_list): Remove internal prototypes, they are defined
        already in ggc-internal.h.
        * ggc-common.c (struct loc_descriptor): Remove #ifdef GATHER_STATISTICS
        wrappers.
        (add_statistics): Likewise.
        (dump_ggc_loc_statistics): Likewise. Return if GATHER_STATISTICS is 0.
        * ggc-zone.c (struct page_entry): Remove #ifdef GATHER_STATISTICS
        wrappers around "survived" and "stats" members.
        (alloc_large_page): Always initialize survived.
        (ggc_internal_alloc_zone_stat): Likewise.
        Remove #ifdef GATHER_STATISTICS wrappers.  Record overhead if
        GATHER_STATISTICS is non-0.
        (ggc_free): Convert #ifdef GATHER_STATISTICS to if-code.
        (sweep_pages): Always increase survived.
        (ggc_collect_1): Convert #ifdef GATHER_STATISTICS to if-code.
        (calculate_average_page_survival): Always define.
        (ggc_collect): Convert #ifdef GATHER_STATISTICS to if-code.
        (ggc_print_statistics): Likewise.
        (ggc_pch_read): Likewise.
        * ggc-page.c (struct globals): Always define "stats" member.
        (ggc_internal_alloc_stat): Convert #ifdef GATHER_STATISTICS to if-code.
        (ggc_free): Likewise.
        (ggc_collec): Likewise.
        (ggc_print_statistics): Likewise.
        * bitmap.h (struct bitmap_head_def): Always define "desc" member.
        (bitmap_initialize_stat): Convert #ifdef GATHER_STATISTICS to if-code.
        * gimple.h (enum gimple_alloc_kind): Always define.
        (gimple_alloc_kind): Likewise.
        * tree-flow.h (phinodes_print_statistics): Always define.
        (ssanames_print_statistics): Likewise.
        * vec.h (vec_heap_free): Always define.
        (VEC_stack_alloc): Define if GATHER_STATISTICS is non-0.
        * alloc-pool.c (alloc_pool_descriptor): Always define.
        (create_alloc_pool): Convert #ifdef GATHER_STATISTICS to if-code.
        (empty_alloc_pool): Likewise.
        (pool_alloc): Likewise.
        (pool_free): Likewise.
        (dump_alloc_pool_statistics): Likewise.
        (print_statistics): Always define.
        * bitmap.c (struct bitmap_descriptor): Always define.
        (bitmap_register): Pass ALONE_FINAL_PASS_MEM_STAT.
        (register_overhead): Always define.
        (bitmap_element_free): Convert #ifdef GATHER_STATISTICS to if-code.
        (bitmap_element_allocate): Likewise.
        (bitmap_elt_clear_from): Likewise.
        (bitmap_obstack_alloc_stat): Likewise.
        (bitmap_gc_alloc_stat): Likewise.
        (bitmap_obstack_free): Likewise.
        (bitmap_find_bit): Likewise.
        (bitmap_ior_and_into):  Likewise.
        (bitmap_print): Likewise.
        (dump_bitmap_statistics): Likewise. Return if GATHER_STATISTICS is 0.
        * gimple.c (gimple_alloc_counts, gimple_alloc_sizes): Always define.
        (gimple_alloc_kind_names): Likewise.
        (gimple_alloc_stat): Convert #ifdef GATHER_STATISTICS to if-code.
        (dump_gimple_statistics): Likewise. Return if GATHER_STATISTICS is 0.
        * rtl.c (rtx_alloc_counts, rtx_alloc_sizes, rtvec_alloc_counts,
        rtvec_alloc_sizes): Always define.
        (rvec_alloc): Convert #ifdef GATHER_STATISTICS to if-code.
        (rtx_alloc_stat): Likewise.
        (dump_rtx_statistics): Likewise. Return if GATHER_STATISTICS is 0.
        * tree.c (_obstack_allocated_p, tree_code_counts, tree_node_counts,
        tree_node_sizes, tree_node_kind_names): Always define.
        (record_node_allocation_statistics): Convert #ifdef GATHER_STATISTICS
        to if-code.
        (type_hash_canon): Likewise.
        (dump_tree_statistics): Likewise.
        * tree-ssanames.c (ssa_name_nodes_reused, ssa_name_nodes_created):
        Always define.
        (ssanames_print_statistics): Likewise.
        (make_ssa_name_fn): Convert #ifdef GATHER_STATISTICS to if-code.
        * tree-phinodes.c (phi_nodes_reused, phi_nodes_created): Always define.
        (phinodes_print_statistics): Likewise.
        (allocate_phi_node): Convert #ifdef GATHER_STATISTICS to if-code.
        * vec.c (struct vec_descriptor): Always define.
        (hash_descriptor, eq_descriptor, ptr_hash_entry, hash_ptr, eq_ptr,
        vec_descriptor, rester_overhead, free_overhead): Likewise.
        (cmp_statistic): Likewise.
        (vec_heap_free): Convert #ifdef GATHER_STATISTICS to if-code.
        (vec_heap_o_reserve_1): Likewise.
        (dump_vec_loc_statistics): Likewise.

2012-07-24  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53616
        * tree-loop-distribution.c (ldist_gen): Do not change
        partition ordering when merging partitions.

2012-07-24  Alan Modra  <amodra@gmail.com>

        PR target/53914
        PR target/54009
        * config/rs6000/constraints.md (Y): Use mem_operand_gpr.
        * config/rs6000/predicates.md (word_offset_memref_operand): Delete.
        Adjust all rs6000_legitimate_offset_address_p calls.
        * config/rs6000/rs6000-protos.h (mem_operand_gpr): Declare.
        (rs6000_secondary_reload_gpr): Declare.
        (rs6000_legitimate_offset_address_p): Update prototype.
        (rs6000_offsettable_memref_p): Delete.
        (rs6000_secondary_reload_ppc64): Delete.
        * config/rs6000/rs6000.c (address_offset): New function.
        (mem_operand_gpr): Likewise.
        (rs6000_legitimate_offset_address_p): Add worst_case param.  When
        not worst_case assume class of regs with least restrictive offsets.
        Adjust all calls.
        (legitimate_lo_sum_address_p): Simplify register mode tests.
        (rs6000_legitimize_address): Likewise.  Assume best case offset
        addressing.  Combine ELF and MACHO lo_sum code.
        (rs6000_mode_dependent_address): Correct offset addressing limits.
        (rs6000_offsettable_memref_p): Make static, add reg_mode param.
        Use reg_mode to help rs6000_legitimate_offset_address_p.
        (rs6000_secondary_reload): Use address_offset.  Handle 32-bit multi
        gpr load/store when offset too large.
        (rs6000_secondary_reload_gpr): Renamed rs6000_secondary_reload_ppc64.
        (rs6000_split_multireg_move): Adjust rs6000_offsettable_memref_p calls.
        * config/rs6000/rs6000.md (movdf_hardfloat32): Use 'Y' constraint
        for gpr load/store.  Order alternatives as r->Y,Y->r,r->r and
        d->m,m->d,d->d.  Correct size of gpr load/store.
        (movdf_softfloat32): Use 'Y' constraint for gpr load/store.  Order
        alternatives.
        (movti_ppc64): Likewise.
        (movdi_internal32): Likewise.  Also disparage fprs.
        (movdi_mfpgpr, movdi_internal64): Likewise.
        (movtf_internal): Use 'm' for fpr load/store.  Order alternatives.
        (movtf_softfloat): Order alternatives.
        (extenddftf2_internal): Use 'm' and 'Y' for store.
        (movti_power, movti_string): Use 'Y' for gpr load/store.  Order.
        (stack_protect_setdi, stack_protect_testdi): Likewise.
        (movdf_hardfloat64_mfpgpr, movdf_hardfloat64): Order alternatives.
        (movdf_softfloat64): Likewise.
        (reload_<mode>_store): Adjust reload_di_store to provide
        reload_si_store as well.
        (reload_<mode>_load): Likewise.

2012-07-23  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/51244
        * config/sh/predicates.md (general_movsrc_operand,
        general_movdst_operand): Reject T_REG.
        * config/sh/sh.md (*extendqisi2_compact_reg, *extendhisi2_compact_reg,
        movsi_i, movsi_ie, movsi_i_lowpart, *movqi_reg_reg, *movhi_reg_reg):
        Remove T_REG alternatives.
        (*negtstsi): New insn.

2012-07-23  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/53511
        * config/sh/sh.md (mulsf3_ie): Delete.
        (mulsf3_i4): Rename to mulsf3_i.
        (mulsf3): Emit mulsf3_i insn.

2012-07-23  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.md (addc1, subc1): Delete.
        (adddi3_compact): Use addc instead of addc1.
        (subdi3_compact): Use subc instead of subc1.

2012-07-23  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386-protos.h (ix86_lea_outperforms): Remove prototype.
        * config/i386/i386.c (ix86_lea_outperforms): Make static.  Make
        split_cost argument signed.
        (ix86_avoid_lea_for_add): Cleanup.
        (ix86_use_lea_for_mov): Use INVALID_REGNUM instead of -1.
        (ix86_avoid_lea_for_addr): Ditto.  Make split_cost signed.
        Use gen_lowpart instead of gen_rtx_SUBREG.  Cleanup.

2012-07-23  Ulrich Weigand  <ulrich.weigand@linaro.org>

        * config/arm/arm.c (arm_reorg): Ensure all insns are split.

2012-07-23  Uros Bizjak  <ubizjak@gmail.com>

        PR target/53961
        * config/i386/i386.md (*lea): Add asserts to detect invalid addresses.
        * config/i386/i386.c (ix86_print_operand_address): Ditto.
        (ix86_decompose_address): Allow (zero_extend:DI (subreg:SI (...)))
        addresses.  Prevent zero extensions of CONST_INT operands.

2012-07-23  Steven Bosscher  <steven@gcc.gnu.org>

        * sbitmap.h (struct int_list): Remove.
        (sbitmap_intersect_of_predsucc, sbitmap_union_of_predsucc):
        Remove prototypes of non-existing function.
        (sbitmap_intersect_of_predecessors, sbitmap_intersect_of_successors,
        sbitmap_union_of_predecessors, sbitmap_union_of_successors): Remove
        unused defines.
        (sbitmap_intersection_of_succs, sbitmap_intersection_of_preds,
        sbitmap_union_of_succs, sbitmap_union_of_preds): Move prototypes to...
        * basic-block.h: ... here.
        * sbitmap.c: Do not include basic-block.h.
        (sbitmap_intersection_of_succs, sbitmap_intersection_of_preds,
        sbitmap_union_of_succs, sbitmap_union_of_preds): Move functions to...
        * cfganal.c: ... here.
        * bt-load.c (compute_out, link_btr_uses): Update for above changes.
        * gcse.c (compute_code_hoist_vbeinout): Likewise.
        * lcm.c (compute_antinout_edge, compute_available): Likewise.
        * Makefile.in: Fix sbitmap.o dependencies.

2012-07-23  Jan-Benedict Glaw  <jbglaw@lug-owl.de>
            Nick Clifton  <nickc@redhat.com>

        * config/frv/frv-protos.h (frv_ifcvt_machdep_init): Prototype.
        * config/frv/frv.c (frv_ifcvt_machdep_init): Change type of
        (unused) parameter to void *.

2012-07-23  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-alias.c (dump_alias_info): Walk over local decls
        instead of referenced vars.

2012-07-23  Steven Bosscher  <steven@gcc.gnu.org>

        * coverage.c: Refer to "notes file" instead of "graph file"
        in all comments.  Explain history of bbg prefix.
        * gcov-io.h: Likewise.
        * gcov.c: Likewise.
        (find_source): Likewise in fnotice.
        (read_graph_file): Likewise.
        (read_count_file): Likewise.
        * doc/gcov.texi: Document -fprofile-dir flag.  Add "notes file"
        and "data file" explicitly in the explanation of the files.

2012-07-22  Steven Bosscher  <steven@gcc.gnu.org>

        PR tree-optimization/53881
        * tree-cfg.c (group_case_labels_stmt): Look up the basic block
        for each label and compare them instead of labels.

2012-07-22  Steven Bosscher <steven@gcc.gnu.org>

        * opts.c (common_handle_option): Do not set
        flag_value_profile_transformations for -fprofile-generate.
        * profile.c (instrument_values): Use COUNTER_FOR_HIST_TYPE.
        (BB_TO_GCOV_INDEX): Remove.
        (output_location): Don't use it.
        (branch_prob): Likewise.  Don't fiddle with the index of
        ENTRY_BLOCK_PTR and EXIT_BLOCK_PTR.  Use clear_aux_for_blocks.
        (find_spanning_tree):
        * gcov.c (struct function_info): Document that blocks 0 and 1
        are the entry resp. exit blocks in gcov, too, like in GCC itself.
        (solve_flow_graph): Use ENTRY_BLOCK and EXIT_BLOCK for special
        blocks identification.
        (output_lines): Likewise.
        * value-prof.c (gimple_value_profile_transformations): Do not
        test flag_value_profile_transformations again.
        (gimple_ic_transform): Take a gimple_stmt_iterator like all other
        transformation functions.
        (gimple_values_to_profile):
        Don't test flag_value_profile_transformations
        * tree-profile.c (tree_profiling): Assert that the cgraph is in
        the CGRAPH_STATE_IPA_SSA state.
        Do not set, or look at, after_tree_profile.
        * function.h (struct function): Remove after_tree_profile bit.
        * omp-low.c (expand_omp_taskreg): Don't set after_tree_profile.
        * tree-inline.c (initialize_cfun): Don't copy it.
        * lto-streamer-out.c (output_struct_function_base): Don't stream it.
        * lto-streamer-in.c (input_struct_function_base): Likewise.

2012-07-22  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.h (TARGET_DYNSHIFT): New macro.
        (SH_DYNAMIC_SHIFT_COST): Use it.
        * config/sh/sh.c (expand_ashiftrt, shl_sext_kind): Likewise.
        (sh_dynamicalize_shift_p): Add TARGET_DYNSHIFT condition.
        Add sanity check for input value.  Add function description.
        * config/sh/sh.md (ashlsi3, ashlsi3_std, ashrsi3_d, lshrsi3,
        lshrsi3_d): Use TARGET_DYNSHIFT.

2012-07-22  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.md (negc): Delete expander.
        (*negc): Rename insn to negc.

2012-07-22  Uros Bizjak  <ubizjak@gmail.com>

        PR target/53961
        * config/i386/i386.md (*lea): New insn pattern.
        (*lea_1): Remove.
        (*lea<mode>_2): Ditto.
        (*lea_{3,4,5,6}_zext): Ditto.
        * config/i386/predicates.md (lea_address_operand): Do not reject
        zero-extended address operands.
        * config/i386/constraints.md (j): Remove address constraint.
        * config/i386/i386.c (ix86_decompose_address): Allow SImode subreg
        of an address.
        (ix86_print_operand_address): Handle SImode subreg of an address.
        (ix86_avoid_lea_for_addr): Reject zero-extended addresses for now.

2012-07-22  Hans-Peter Nilsson  <hp@axis.com>

        Emit executable-stack note correctly for CRIS targets.
        * config/cris/cris.c (cris_file_end): New function.
        (TARGET_ASM_FILE_END): Define.

2012-07-22  Chung-Lin Tang  <cltang@codesourcery.com>
            Maxim Kuvyrkov  <maxim@codesourcery.com>
            NetLogic Microsystems Inc.

        * config/mips/mips.c (mips_issue_rate): Handle XLP.
        * config/mips/mips.md: Include xlp.md.
        * config/mips/xlp.md: New file.

2012-07-21  Steven Bosscher <steven@gcc.gnu.org>

        PR gcov-profile/32543
        * profile.c (branch_prob): Update total_num_edges_instrumented and
        report the number of edges to instrument.

2012-07-21  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.md: Correct comment regarding clrt and sett insns.

2012-07-21  Andrew Pinski  <apinski@cavium.com>

        * config/mips/mips.md (*popcountdi2_trunc): New pattern
        to handle popcount of a truncation.

2012-07-21  Andrew Pinski  <apinski@cavium.com>

        * config/mips/mips-protos.h (mips_expand_ext_as_unaligned_load):
        Add a bool argument.
        * config/mips/mips.c (mips_block_move_straight): Update call to
        mips_expand_ext_as_unaligned_load.
        (mips_expand_ext_as_unaligned_load): Add unsigned_p argument.
        Accept DImode dest when the width is that of SImode.
        * config/mips/mips.md (extv): Update call to
        mips_expand_ext_as_unaligned_load.
        (extzv): Likewise.

2012-07-21  Andrew Pinski  <apinski@cavium.com>

        * config/mips/mips.c (mips_get_unaligned_mem): Copy *op after calling
        adjust_address.

2012-07-20  Maxim Kuvyrkov  <maxim@codesourcery.com>

        * config/mips/mips.md (define_attr sync_*): Move before "type".
        (define_attr "type"): New values "atomic" and "syncloop".
        * config/mips/sync.md (atomic_exchange<mode>, atomic_fetch_add<mode>):
        Set "type" attribute.
        * config/mips/generic.md (generic_atomic, generic_syncloop):
        New reservations.
        * config/mips/10000.md, config/mips/20kc.md,
        * config/mips/24k.md, config/mips/4130.md,
        * config/mips/4k.md, config/mips/5400.md,
        * config/mips/5500.md, config/mips/5k.md,
        * config/mips/7000.md, config/mips/74k.md,
        * config/mips/9000.md, config/mips/loongson2ef.md,
        * config/mips/loongson3a.md, config/mips/octeon.md,
        * config/mips/sb1.md, config/mips/sr71k.md,
        * config/mips/xlr.md: Handle "atomic" and "syncloop" types.

2012-07-20  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.md: Group and sort shift related patterns.
        (ashlsi3_n, *ashlhi3_n, lshrsi3_n): Remove length attributes.

2012-07-20  Hans-Peter Nilsson  <hp@axis.com>

        * config/cris/cris.c (cris_asm_output_ident): Remove unused
        local variables section_asm_op, size, buf.

2012-07-20  Pat Haugen <pthaugen@us.ibm.com>
            Steven Bosscher  <steven@gcc.gnu.org>

        * config/rs6000/power4.md (power4-store-update): Fix reservation.
        (power4-three): Likewise.

2012-07-20  Sameera Deshpande  <sameera.deshpande@arm.com>
            Greta Yorsh  <Greta.Yorsh@arm.com>

        * config/arm/arm.c (arm_cortex_a15_tune): New tune.
        * config/arm/arm-cores.def (cortex-a15): Use it.

2012-07-20  Sameera Deshpande  <sameera.deshpande@arm.com>
            Greta Yorsh  <Greta.Yorsh@arm.com>

        * config/arm/arm-protos.h (tune_params): Add prefer_ldrd_strd.
        * config/arm/arm.c (arm_slowmul_tune): Initialize it.
        (arm_fastmul_tune, arm_strongarm_tune): Likewise.
        (arm_xscale_tune, arm_9e_tune, arm_v6t2_tune): Likewise.
        (arm_cortex_tune, arm_cortex_a5_tune, arm_cortex_a9_tune): Likewise.
        (arm_fa726te_tune): Likewise.

2012-07-20  Richard Guenther  <rguenther@suse.de>

        * tree-dfa.c (collect_dfa_stats): Simplify.
        * tree-ssa-structalias.c (compute_may_aliases): Do not dump
        referenced vars.
        * cfgexpand.c (estimated_stack_frame_size): Walk over local
        decls instead of referenced vars.
        * tree-ssa.c (delete_tree_ssa): Simplify.
        * tree-tailcall.c (find_tail_calls): Walk over local decls
        instead of referenced vars.
        (add_virtual_phis): Remove.
        (tree_optimize_tail_calls_1): Instead mark the virtual operand
        for renaming.

2012-07-20  Steven Bosscher  <steven@gcc.gnu.org>

        * basic-block.h (BB_FLAGS_TO_PRESERVE): New define.
        (brief_dump_cfg): Update prototype to take flags argument.
        (check_bb_profile): Remove prototype.
        * tracer.c (tracer): Update brief_dump_cfg calls.
        * cfghooks.c (dump_bb): Do not pass TDF_COMMENT to dump_bb_info.
        Call dump_bb_info before and after the cfghook dump_bb.  Terminate
        the dump with a newline.
        (dump_flow_info): Do not call check_bb_profile.
        * cfg.c (clear_bb_flags): Update using BB_FLAGS_TO_PRESERVE.
        (check_bb_profile): Make static.  Take indent and flags arguments.
        (dump_bb_info): Always dump loop depth.  With TDF_DETAILS, call
        check_bb_profile.  Print one edge per line.
        (brief_dump_cfg): Take a flags argument, and filter out
        TDF_COMMENT and TDF_DETAILS.
        * pretty-print.c (pp_base_newline): Set pp_needs_newline to false.
        * gimple-pretty-print.c (dump_gimple_bb_header): Do not use
        dump_bb_info here, it is already called from dump_bb.  Idem for
        check_bb_profile.
        (dump_gimple_bb_footer): Likewise.
        (gimple_dump_bb_buff): Call pp_flush after dump_gimple_stmt to
        avoid broken dumps for statement histograms.
        (gimple_dump_bb): Handle ENTRY_BLOCK and EXIT_BLOCK.  Do
        not call pp_flush here, the buffer should be empty.
        * sched-rgn.c (debug_region): Pass TDF_BLOCKS to dump_bb.
        * sched-vis.c (debug_bb_slim): Likewise.
        * tree-cfg.c (remove_bb): Pass dump_flags to dump_bb.
        (gimple_debug_bb): Pass TDF_BLOCKS to dump_bb.
        (gimple_dump_cfg): Do brief_dump_cfg with TDF_COMMENT.
        (dump_function_to_file): Do not call check_bb_profile on
        ENTRY_BLOCK and EXIT_BLOCK, check_bb_profile doesn't handle them.
        Use dump_bb instead of gimple_dump_bb.
        (print_loops_bb): Use dump_bb instead of gimple_dump_bb.
        * passes.c (execute_function_dump): Always call print_rtl_with_bb
        for RTL dumps.
        * cfgrtl.c (print_rtl_with_bb): Handle printing without an up-to-date
        CFG.  With TDF_BLOCKS and TDF_DETAILS, do DF dumps at the top and
        bottom of each basic block.

2012-07-20  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/54031
        * tree-ssa-ccp.c (get_value_from_alignment): Use
        get_pointer_alignment_1.

2012-07-20  Richard Guenther  <rguenther@suse.de>

        * tree-inline.c (add_local_variables): Remove check_var_ann
        parameter and dead code.
        (expand_call_inline): Adjust.
        (tree_function_versioning): Likewise.

2012-07-20  Jakub Jelinek  <jakub@redhat.com>

        PR c++/28656
        * tree-vrp.c (nonnull_arg_p): Handle all nonnull attributes instead
        of just the first one.

2012-07-20  Richard Guenther  <rguenther@suse.de>

        * builtins.c (get_object_alignment_2): Correct offset handling
        when using type alignment of a MEM_REF kind base.

2012-07-20  Kirill Yukhin  <kirill.yukhin@intel.com>

        PR target/53877
        * config/i386/lzcntintrin.h (_lzcnt_u32): New.
        (_lzcnt_u64): Ditto.

2012-07-19  Eric Botcazou  <ebotcazou@adacore.com>

        * config/sparc/sparc.md (adddi3_insn_sp32): Add earlyclobber.

2012-07-19  Eric Botcazou  <ebotcazou@adacore.com>

        * tree-ssa-forwprop.c (combine_conversions): Punt if the RHS of the
        defining statement is a SSA name that occurs in abnormal PHIs.

2012-07-19  Eric Botcazou  <ebotcazou@adacore.com>

        * gimple-fold.c (canonicalize_constructor_val): Strip only useless type
        conversions.

2012-07-19  Jakub Jelinek  <jakub@redhat.com>

        PR rtl-optimization/53942
        * function.c (assign_parm_setup_reg): Avoid zero/sign extension
        directly from likely spilled non-fixed hard registers, move them
        to pseudo first.

2012-07-19  Steve Ellcey  <sellcey@mips.com>

        * config/mips/mips.c (mips_set_mips16_mode): Clear SYNCI_MASK in
        MIPS16 mode.

2012-07-19  Jason Merrill  <jason@redhat.com>

        PR debug/53235
        * dwarf2out.c (get_die_parent): New.
        (generate_type_signature): Use it.

2012-07-19  Richard Henderson  <rth@redhat.com>

        * config/ia64/vect.md (smulv4hi3_highpart): New.
        (umulv4hi3_highpart): New.
        (vec_widen_smult_even_v4hi): Rename from pmpy2_even.
        (vec_widen_smult_odd_v4hi): Rename from pmpy2_odd.
        (udot_prodv8qi, sdot_prodv8qi): Remove.
        (sdot_prodv4hi, udot_prodv4hi): Remove.
        * config/ia64/ia64.c (ia64_expand_dot_prod_v8qi): Remove.
        * config/ia64/ia64-protos.h: Update.

        * tree-vect-patterns.c (vect_recog_divmod_pattern): Do not require
        vectors larger than UNITS_PER_WORD.

        * expr.c (store_constructor): Initialize icode with CODE_FOR_nothing.
        * tree-vect-stmts.c (vectorizable_operation): Use LAST_INSN_CODE for
        dummy != CODE_FOR_nothing value.

2012-07-19  Uros Bizjak  <ubizjak@gmail.com>

        * doc/tm.texi.in (MODE_AFTER): Add entity as the first macro argument.
        * doc/tm.texi: Regenerate.
        * mode-switching.c (optimize_mode_switching): Update MODE_AFTER call.
        * config/sh/sh.h (MODE_AFTER): Update.
        * config/epiphany/epiphany.h (MODE_AFTER): Update.

2012-07-19  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/54017
        * tree-cfgcleanup.c (cleanup_omp_return): Remove.
        (cleanup_tree_cfg_bb): Don't call it.
        * omp-low.c (expand_omp_sections): Fix up the !exit_reachable case
        handling.

2012-07-19  Christian Bruel  <christian.bruel@st.com>

        PR target/54029
        * config/sh/sh.c (gen_far_branch): Set JUMP_LABEL for return jumps.

2012-07-19  Richard Guenther  <rguenther@suse.de>
            Eric Botcazou  <ebotcazou@adacore.com>

        * tree-ssa-ccp.c (valid_lattice_transition): Clarify comment
        about transition from invariant to known bits.
        (likely_value): Addresses with UNDEFINED components are UNDEFINED.

2012-07-19  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53970
        * tree-vect-data-refs.c (not_size_aligned): Avoid sign-compare warning.

2012-07-19  Tristan Gingold  <gingold@adacore.com>
            Richard Henderson  <rth@redhat.com>

        * opts.c (finish_options): Handle UI_SEH.
        * expr.c (build_personality_function): Handle UI_SEH.
        * dwarf2out.c (dwarf2out_begin_prologue): Handle UI_SEH.
        * coretypes.h (unwind_info_type): Add UI_SEH.
        * config/i386/winnt.c (i386_pe_seh_emit_except_personality):
        New function.
        (i386_pe_seh_init_sections): Likewise.
        * config/i386/cygming.h (TARGET_ASM_EMIT_EXCEPT_PERSONALITY): Define.
        (TARGET_ASM_INIT_SECTIONS): Define.
        * common/config/i386/i386-common.c (TARGET_EXCEPT_UNWIND_INFO): Define.
        (i386_except_unwind_info): New function.

2012-07-18  Maciej W. Rozycki  <macro@codesourcery.com>
            Chao-ying Fu  <fu@mips.com>

        * config/mips/mips.opt (mmcu): New option.
        * config/mips/mips.h (TARGET_CPU_CPP_BUILTINS): Define
        _mips_mcu when TARGET_MCU.
        (ASM_SPEC): Pass mcu options to the assembler.
        * doc/invoke.texi (MIPS Options): Document -mmcu and -mno-mcu.

2012-07-18  Ralf Corsépius  <ralf.corsepius@rtems.org>

        * config.gcc (v850-*-rtems*): New target.
        * config/v850/rtems.h: New.
        * config/v850/t-rtems: New.

2012-07-18  Bill Schmidt  <wschmidt@linux.ibm.com>

        * doc/invoke.texi: Add -fhoist-adjacent-loads and -ftree-slsr to list
        of flags controlling optimization; add -ftree-slsr to list of flags
        enabled by default at -O; add -fhoist-adjacent-loads to list of flags
        enabled by default at -O2; add -fvect-cost-model to list of flags
        enabled by default at -O3; document -fhoist-adjacent-loads and
        -ftree-slsr.
        * opts.c (default_option): Make -ftree-slsr default at -O1 and above.
        * gimple-ssa-strength-reduction.c (gate_strength_reduction): Use
        flag_tree_slsr.
        * common.opt: Add -ftree-slsr with flag_tree_slsr.

2012-07-18  Jie Zhang  <jzhang918@gmail.com>
            Julian Brown  <julian@codesourcery.com>

        * config/arm/arm.c (arm_rtx_costs_1): Adjust cost for CONST_VECTOR.
        (arm_size_rtx_costs): Likewise.
        (neon_valid_immediate): Add a case for double 0.0.

2012-07-18  Andrew Stubbs  <ams@codesourcery.com>
            Mark Shinwell  <shinwell@codesourcery.com>
            Julian Brown  <julian@codesourcery.com>

        * config/arm/vfp.md (*arm_movsi_vfp, *thumb2_movsi_vfp)
        (*movdi_vfp_cortexa8, *movsf_vfp, *thumb2_movsf_vfp)
        (*movdf_vfp, *thumb2_movdf_vfp, *movsfcc_vfp)
        (*thumb2_movsfcc_vfp, *movdfcc_vfp, *thumb2_movdfcc_vfp): Add
        neon_type.
        * config/arm/arm.md (neon_type): Update comment.

2012-07-18  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53970
        * tree.h (contains_packed_reference): Remove.
        * expr.c (contains_packed_reference): Likewise.
        * tree-vect-data-refs.c (not_size_aligned): New function.
        (vector_alignment_reachable_p): Use it.
        (vect_supportable_dr_alignment): Likewise.

2012-07-18  Richard Guenther  <rguenther@suse.de>

        * tree.h (get_object_or_type_alignment): Remove.
        * builtins.c (get_object_alignment_2): New function copied from
        get_object_alignment_1.  Take extra argument to indicate whether
        we take the address of EXP.  Rework to use type alignment information
        if not, and return whether the result is an approximation or not.
        (get_object_alignment_1): Wrap around get_object_alignment_2.
        (get_pointer_alignment_1): Call get_object_alignment_2 indicating
        we take the address.
        (get_object_or_type_alignment): Remove.
        * expr.c (expand_assignment): Call get_object_alignment.
        (expand_expr_real_1): Likewise.

2012-07-18  Nick Clifton  <nickc@redhat.com>

        * doc/invoke.texi (ARM Options): Document -munaligned-access.

2012-07-18  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.md (mulsidi3, umulsidi3): Remove constraints in
        expander.  Use arith_reg_dest predicate.
        (rotldi3, rotrdi3): Remove constraints in expander.
        (adddi3_compact, subdi3_compact, mulsidi3_compact, umulsidi3_compact,
        ashlsi3_n, *ashlhi3_n, ashrsi2_16, ashrsi2_31, lshrsi3_n): Convert to
        insn_and_split.

2012-07-18  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/33135
        * config/sh/sh.opt (mieee): Use Var instead of Mask.  Correct
        description.
        * config/sh/sh.c (sh_option_override): Do not change
        flag_finite_math_only.  Set TARGET_IEEE to complement of
        flag_finite_math_only.
        * doc/invoke.texi (SH options): Add mno-ieee.  Correct description
        of mieee and mno-ieee behavior.

2012-07-18  Steven Bosscher  <steven@gcc.gnu.org>

        * graphite-poly.c (print_pbb_body): Fixup dump_bb call.

2012-07-18  Steven Bosscher  <steven@gcc.gnu.org>

        * dumpfile.h (TDF_COMMENT): New define.
        * basic-block.h (EDGE_FALLTHRU, EDGE_ABNORMAL, EDGE_ABNORMAL_CALL,
        EDGE_EH, EDGE_FAKE, EDGE_DFS_BACK, EDGE_CAN_FALLTHRU,
        EDGE_IRREDUCIBLE_LOOP, EDGE_SIBCALL, EDGE_LOOP_EXIT, EDGE_TRUE_VALUE,
        EDGE_FALSE_VALUE, EDGE_EXECUTABLE, EDGE_CROSSING, EDGE_PRESERVE):
        Move to new file cfg-flags.h.
        (enum cfg_edge_flags): New enum, using cfg-flags.h.
        (EDGE_ALL_FLAGS): Compute value automatically.
        (BB_NEW, BB_REACHABLE, BB_IRREDUCIBLE_LOOP, BB_SUPERBLOCK,
        BB_DISABLE_SCHEDULE, BB_HOT_PARTITION, BB_COLD_PARTITION,
        BB_DUPLICATED, BB_NON_LOCAL_GOTO_TARGET, BB_RTL,
        BB_FORWARDER_BLOCK, BB_NONTHREADABLE_BLOCK, BB_MODIFIED, BB_VISITED,
        BB_IN_TRANSACTION): Move to new file cfg-flags.h.
        (enum bb_flags): Rename to cfg_bb_flags.  Use cfg-flags.h.
        (BB_ALL_FLAGS): New, compute value automatically.
        (dump_bb_info): Update prototype.
        (dump_edge_info): Update prototype.
        * cfg-flags.h: New file.
        * cfg.c (dump_edge_info): Take flags argument.  Be verbose only if
        TDF_DETAILS and not TDF_SLIM.  Include cfg-flags.h for bitnames.
        Check that the edge flags are within the range of EDGE_ALL_FLAGS.
        (debug_bb): Update dump_bb call.
        (dump_cfg_bb_info): Remove.
        (dump_bb_info): New function.  Use cfg-flags.h for bitnames.
        Adjust verbosity using TDF_* flags.  Check that the basic block flags
        are within the range of BB_ALL_FLAGS.
        (brief_dump_cfg): Use dump_bb_info instead of dump_cfg_bb_info.
        * cfghooks.h (struct cfghooks): Update dump_bb hook, take a FILE
        first for consistency with other dump functions.
        (dump_bb): Update prototype accordingly.
        * cfghooks.c: Include dumpfile.h.
        (verify_flow_info): Update dump_edge_info calls.
        (dump_bb): Take a flags argument and pass it around.
        Use dump_bb_info to dump common information about a basic block.
        (dump_flow_info): Moved here from cfgrtl.c.  Make IL agnostic.
        (debug_flow_info): Moved here from cfgrtl.c.
        * profile.c (is_edge_inconsistent): Update dump_bb calls.
        * loop-invariant.c (find_defs): Update print_rtl_with_bb call.
        * rtl.h (debug_bb_n_slim, debug_bb_slim, print_rtl_slim,
        print_rtl_slim_with_bb): Remove prototypes.
        (dump_insn_slim): Adjust prototype to take a const_rtx.
        (print_rtl_with_bb): Adjust prototype.
        * sched-rgn.c (debug_region): Use dump_bb instead of debug_bb_n_slim.
        * sched-vis.c (dump_insn_slim): Take a const_rtx.
        (debug_insn_slim): Prototype here near DEBUG_FUNCTION marker.
        (print_rtl_slim_with_bb): Remove.
        (print_rtl_slim): Rename to debug_rtl_slim.  Print only insn info,
        not basic block info (print_rtl_with_bb with TDF_SLIM should be used
        for that.  Prototype here near DEBUG_FUNCTION marker.
        (debug_bb_slim): Prototype here near DEBUG_FUNCTION marker.
        Use dump_bb.
        (debug_bb_n_slim): Prototype here near DEBUG_FUNCTION marker.
        * tree-cfg.c (gimple_can_merge_blocks_p): Use EDGE_COMPLEX.
        (remove_bb): Update dump_bb call.
        (gimple_debug_bb): Use dump_bb.
        (dump_function_to_file): Update gimple_dump_bb call.
        (print_loops_bb): Likewise.
        * tree-flow.h (gimple_dump_bb): Update prototype.
        * gimple-pretty-print.c (dump_bb_header): Rename to
        dump_gimple_bb_header.  Write to a stream instead of a pretty
        printer.  Use dump_bb_info to dump basic block info.
        (dump_bb_end): Rename to dump_gimple_bb_footer.  Write to a
        stream instead of a pretty printer.  Use dump_bb_info.
        (gimple_dump_bb_buff): Do not call dump_bb_header and dump_bb_end.
        (gimple_dump_bb): Do it here with dump_gimple_bb_header and
        dump_gimple_bb_footer.
        * cfgrtl.c (rtl_dump_bb): Update prototype.  Only dump DF if the
        dump flags have TDF_DETAILS.  Use dump_insn_slim if TDF_SLIM.
        (print_rtl_with_bb): Take a flags argument and pass it around.
        Use dump_insn_slim if TDF_SLIM.
        (dump_bb_info): Removed and re-incarnated in cfg.c.
        (dump_flow_info): Moved to cfghooks.c.
        (debug_flow_info): Moved to cfghooks.c.
        * passes.c (execute_function_dump): Unconditionally use
        print_rtl_with_bb for RTL dumps, now that it understands TDF_SLIM.
        * final.c (dump_basic_block_info): Update dump_edge_info calls.
        * tree-vrp.c (dump_asserts_for): Likewise.
        * ifcvt.c (if_convert): Unconditionally use print_rtl_with_bb.
        * tree-if-conv.c (if_convertible_bb_p): Don't look at
        EDGE_ABNORMAL_CALL, it has no meaning in the GIMPLE world.
        * trans-mem.c (make_tm_edge): Don't set EDGE_ABNORMAL_CALL,
        for the same reason.
        * config/rl78/rl78.c (rl78_reorg): Update print_rtl_with_bb calls.

2012-07-17  Richard Guenther  <rguenther@suse.de>

        * tree-vect-data-refs.c (vect_get_new_vect_var): Add referenced
        vars here, use create_tmp_reg where appropriate.
        (vect_create_addr_base_for_vector_ref): Do not add referenced
        vars here, use create_tmp_reg where appropriate.
        (vect_create_data_ref_ptr): Likewise.
        (vect_create_destination_var): Likewise.
        (vect_permute_store_chain): Likewise.
        (vect_permute_load_chain): Likewise.
        * tree-vect-loop-manip.c (vect_create_cond_for_align_checks):
        Likewise.
        * tree-vect-loop.c (get_initial_def_for_induction): Likewise.
        * tree-vect-patterns.c (vect_recog_temp_ssa_var): Likewise.
        (vect_handle_widen_op_by_const): Likewise.
        * tree-vect-stmts.c (vect_init_vector): Likewise.
        (vectorizable_load): Likewise.

2012-07-17  Tom de Vries  <tom@codesourcery.com>

        * hwint.c: Fix loop range.

2012-07-17  Tom de Vries  <tom@codesourcery.com>

        * double-int.h (double_int_popcount): New inline function.
        * hwint.c (popcount_hwi): New function.
        * hwint.h (popcount_hwi): Declare function.  New inline function.

2012-07-17  Richard Henderson  <rth@redhat.com>

        * tree-vect-stmts.c (supportable_widening_operation): Remove decl
        parameters.
        (vectorizable_conversion): Update supportable_widening_operation call.
        * tree-vect-patterns.c (vect_recog_widen_mult_pattern): Likewise.
        (vect_recog_widen_shift_pattern): Likewise.
        * tree-vectorizer.h: Update decl.

2012-07-17  Ramana Radhakrishnan  <ramana.radhakrishnan@linaro.org>
            Ulrich Weigand  <ulrich.weigand@linaro.org>

        * common/config/arm/arm-common.c (arm_option_optimization_table):
        Enable -fsched-pressure by default while optimizing.
        * config/arm/arm.c (arm_option_override): Use the alternate scheduler
        pressure algorithm by default.

2012-07-16  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.h (CONST_OK_FOR_I06): Delete.
        (CONST_OK_FOR_I10): Move macro to ...
        * config/sh/sh.c: ... here.
        (sh_legitimate_index_p): Use satisfies_constraint_I06 instead of
        CONST_OK_FOR_I06.

2012-07-16  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.md: Delete mov related define_peephole patterns.

2012-07-16  Jonathan Wakely  <jwakely.gcc@gmail.com>

        PR c++/53919
        * doc/install.texi (Installing GCC): Refer to instructions for
        released versions. Fix hyphenation.

2012-07-16  Ulrich Weigand  <Ulrich.Weigand@de.ibm.com>

        * config/spu/spu.c (targetm): Move to bottom of file.
        (spu_attribute_table): Likewise.
        (spu_option_override, spu_init_builtins, spu_builtin_decl,
        spu_scalar_mode_supported_p, spu_vector_mode_supported_p,
        spu_legitimate_address_p, spu_addr_space_legitimate_address_p,
        adjust_operand, get_pic_reg, need_to_save_reg, frame_emit_store,
        frame_emit_load, frame_emit_add_imm, emit_nop_for_insn,
        insn_clobbers_hbr, spu_emit_branch_hint, spu_emit_vector_compare,
        get_branch_target, spu_machine_dependent_reorg, spu_sched_issue_rate,
        spu_sched_variable_issue, spu_sched_adjust_cost, spu_sched_init_global,
        spu_sched_init, spu_sched_reorder, spu_handle_fndecl_attribute,
        spu_handle_vector_attribute, spu_pass_by_reference, spu_function_arg,
        spu_function_arg_advance, spu_build_builtin_va_list, spu_va_start,
        spu_gimplify_va_arg_expr, store_with_one_insn_p, reg_aligned_for_addr,
        spu_assemble_integer, spu_asm_globalize_label, spu_rtx_costs,
        spu_function_ok_for_sibcall, spu_init_libfuncs, spu_return_in_memory,
        spu_encode_section_info, spu_legitimize_address,
        spu_addr_space_legitimize_address, spu_builtin_mask_for_load,
        spu_builtin_vectorization_cost, spu_vector_alignment_reachable,
        spu_addr_space_pointer_mode, spu_addr_space_address_mode,
        spu_addr_space_subset_p, spu_addr_space_convert, spu_sms_res_mii,
        spu_section_type_flags, spu_select_section, spu_unique_section,
        spu_trampoline_init, spu_conditional_register_usage,
        spu_ref_may_alias_errno, spu_output_mi_thunk, spu_unwind_word_mode,
        spu_libgcc_cmp_return_mode, spu_libgcc_shift_count_mode,
        spu_setup_incoming_varargs): Remove prototypes.
        (spu_legitimize_address): Add "static" to definition.

2012-07-16  Jakub Jelinek  <jakub@redhat.com>

        * config/i386/rtmintrin.h (_xabort): Remove trailing semicolon.

2012-07-16  Ulrich Weigand  <ulrich.weigand@linaro.org>

        * tree-ssa-ccp.c (optimize_unreachable): Check gsi_end_p
        before calling gsi_stmt.

2012-07-16  Kirill Yukhin  <kirill.yukhin@intel.com>

        Revert
        2012-07-16 Sergey Melnikov <sergey.melnikov@intel.com>

        * config/i386/i386.md (stack_protect_set): Disable the pattern
        for Android since Android libc (bionic) does not provide random
        value for stack protection guard at gs:0x14. Guard value
        will be provided from external symbol (default implementation).
        (stack_protect_set_<mode>): Likewise.
        (stack_protect_test): Likewise.
        (stack_protect_test_<mode>): Likewise.

2012-07-16  H.J. Lu  <hongjiu.lu@intel.com>

        PR middle-end/53959
        PR bootstrap/53963
        * gimple.c (gimple_types_compatible_p_1): Restore type attribute
        comparison.

2012-07-16  Bill Schmidt  <wschmidt@linux.ibm.com>

        * opts.c (default_option): Add -fvect-cost-model to default options
        at -O3 and above.

2012-07-16  Steven Bosscher  <steven@gcc.gnu.org>

        * graphite-clast-to-gimple.c, graphite-dependences.c,
        graphite-sese-to-poly.c: Include tree-pass.h instead of dumpfile.h
        for pass TODO flags.
        * Makefile.in: Fix dependencies.

2012-07-16  Steven Bosscher  <steven@gcc.gnu.org>

        * haifa-sched.c (init_before_recovery): Do not set EDGE_CAN_FALLTHRU.
        * cfgrtl.c (force_nonfallthru_and_redirect): Likewise.

        * function.c (stack_protect_epilogue): Use expand_call to expand
        targetm.stack_protect_fail.
        * stmt.c (expand_expr_stmt): Remove now-unused function.
        * tree.h (expand_expr_stmt): Remove prototype.
        * doc/tm.texi.in (TARGET_STACK_PROTECT_FAIL): Document that this
        hook must return a CALL_EXPR.
        * doc/tm.texi: Regenerate.

        * emit-rtl.c (emit_label_before): Do not allow the same label
        to be emitted twice.
        (emit_label_after): Likewise.
        (emit_label): Likewise.

        * flags.h (TYPE_OVERFLOW_WRAPS, TYPE_OVERFLOW_UNDEFINED,
        TYPE_OVERFLOW_TRAPS, POINTER_TYPE_OVERFLOW_UNDEFINED): Move to tree.h.
        * tree.h (TYPE_OVERFLOW_WRAPS, TYPE_OVERFLOW_UNDEFINED,
        TYPE_OVERFLOW_TRAPS, POINTER_TYPE_OVERFLOW_UNDEFINED): New home.

2012-07-16  Steven Bosscher  <steven@gcc.gnu.org>

        * system.h (dump_file): Do not define.
        * tree-pass.h: Include dumpfile.h, which is a new file containing...
        (enum tree_dump_index, TDF_*, get_dump_file_name, dump_enabled_p,
        dump_initialized_p, dump_begin, dump_end, dump_node, dump_switch_p,
        dump_flag_name, dump_file, dump_flags, dump_file_name,
        get_dump_file_info, struct dump_file_info): all of this, moved to...
        * dumpfile.h: Here, new file.
        * tree-dump.h: Include dumpfile.h, but not tree-pass.h.
        (dump_stmt): Remove prototype for C++ specific function.
        (dump_enumerated_decls): Move prototype from here...
        * tree-flow.h (dump_enumerated_decls): ... to here.
        (get_ref_base_and_extent) Move prototype from here ...
        * tree.h (get_ref_base_and_extent) ... to here.
        * tree-ssa-live.c: Do not inclde tree-pretty-print.h, because
        gimple-pretty-print.h is enough.  Do not include tree-dump.h,
        include timevar.h and dumpfile.h instead.
        (struct numbered_tree_d, compare_decls_by_uid,
        dump_enumerated_decls_push, dump_enumerated_decls): Move from here ...
        * tree-dfa.c:(struct numbered_tree_d, compare_decls_by_uid,
        dump_enumerated_decls_push, dump_enumerated_decls):... to here.
        Do not include timevar.h.
        * tree.c: Do not include timevar.h.
        * tree-cfg.c: Do not include langhooks.h, tree-pretty-print.h, and
        timevar.h.
        (dump_cfg_stats): Use current_function_name.
        (gimple_cfg2vcg): Likewise.
        (dump_function_to_file): Likewise.
        * df-scan.c: Do not include tree-pass.h and timevar.h.
        Include dumpfile.h.
        (df_entry_block_bitmap_verify, df_exit_block_bitmap_verify): Do not
        use print_current_pass.
        * df-problems.c: Include dumpfile.h.
        Always define REG_DEAD_DEBUGGING, avoid #ifdef code, because it
        leads to errors in the code not selected.
        (df_note_compute): Do not print_rtl_with_bb here.  Fix compilation
        bug if REG_DEAD_DEBUGGING is not 0, get_insns is not available here.
        * lcm.c: Include dumpfile.h.
        Remove obsolete include of insn-attr.h.
        * dojump.c (do_compare_rtx_and_jump): Remove failure printing for
        missing probability notes.
        * stmt.c: Include dumpfile.h.
        (emit_case_decision_tree): Re-enable printing expand details only
        if TDF_DETAILS.
        * alias.c, auto-inc-dec.c, bb-reorder.c, caller-save.c, cfg.c,
        cfgcleanup.c, cfgexpand.c, cfgloop.c, cfgloopmanip.c, cgraph.c,
        cgraphclones.c, cgraphunit.c, combine.c, combine-stack-adj.c,
        coverage.c, cprop.c, cse.c, cselib.c, dbgcnt.c, dce.c, df-core.c,
        dse.c, dwarf2out.c, emit-rtl.c, except.c, expr.c, final.c,
        function.c, fwprop.c, gcse.c, gimple-fold.c,
        gimple-pretty-print.c, gimple-ssa-strength-reduction.c,
        gimplify.c, graphite-blocking.c, graphite-clast-to-gimple.c,
        graphite-dependences.c, graphite-interchange.c,
        graphite-optimize-isl.c, graphite-poly.c,
        graphite-sese-to-poly.c, haifa-sched.c, hw-doloop.c, ifcvt.c,
        ipa.c, ipa-cp.c, ipa-inline-analysis.c, ipa-inline.c,
        ipa-inline-transform.c, ipa-prop.c, ipa-pure-const.c,
        ipa-reference.c, ipa-split.c, ipa-utils.c, ira.c, ira-emit.c,
        jump.c, loop-doloop.c, loop-init.c, loop-invariant.c, loop-iv.c,
        loop-unroll.c, loop-unswitch.c, lower-subreg.c,
        lto-section-out.c, lto-streamer-in.c, matrix-reorg.c, mcf.c,
        mode-switching.c, modulo-sched.c, omega.c, omp-low.c, passes.c,
        plugin.c, postreload.c, postreload-gcse.c, predict.c, print-rtl.c,
        print-tree.c, profile.c, recog.c, ree.c, regcprop.c, reginfo.c,
        regmove.c, regrename.c, reg-stack.c, reload1.c, reorg.c,
        sched-rgn.c, sched-vis.c, sel-sched.c, sel-sched-ir.c,
        store-motion.c, tracer.c, trans-mem.c, tree-affine.c,
        tree-call-cdce.c, tree-cfgcleanup.c, tree-chrec.c,
        tree-data-ref.c, tree-diagnostic.c, tree-dump.c,
        tree-eh.c, tree-flow-inline.h, tree-if-conv.c, tree-into-ssa.c,
        tree-mudflap.c, tree-nrv.c, tree-object-size.c,
        tree-optimize.c, tree-outof-ssa.c, tree-predcom.c,
        tree-pretty-print.c, tree-profile.c, tree-scalar-evolution.c,
        tree-sra.c, tree-ssa-address.c, tree-ssa-alias.c, tree-ssa.c,
        tree-ssa-ccp.c, tree-ssa-coalesce.c, tree-ssa-copy.c,
        tree-ssa-copyrename.c,, tree-ssa-dce.c, tree-ssa-dom.c,
        tree-ssa-dse.c, tree-ssa-forwprop.c, tree-ssa-ifcombine.c,
        tree-ssa-loop.c, tree-ssa-loop-ch.c, tree-ssa-loop-im.c,
        tree-ssa-loop-ivcanon.c, tree-ssa-loop-ivopts.c,
        tree-ssa-loop-manip.c, tree-ssa-loop-niter.c,
        tree-ssa-loop-prefetch.c, tree-ssa-loop-unswitch.c,
        tree-ssa-math-opts.c, tree-ssa-operands.c, tree-ssa-phiopt.c,
        tree-ssa-phiprop.c, tree-ssa-pre.c, tree-ssa-propagate.c,
        tree-ssa-reassoc.c, tree-ssa-sccvn.c, tree-ssa-sink.c,
        tree-ssa-structalias.c, tree-ssa-tail-merge.c, tree-ssa-ter.c,
        tree-ssa-threadedge.c, tree-ssa-threadupdate.c,
        tree-ssa-uncprop.c, tree-ssa-uninit.c,
        tree-switch-conversion.c, tree-tailcall.c,
        tree-vect-data-refs.c, tree-vect-loop.c,
        tree-vect-loop-manip.c, tree-vectorizer.c,
        tree-vect-patterns.c, tree-vect-slp.c, tree-vect-stmts.c,
        tree-vrp.c, value-prof.c, var-tracking.c, web.c: Include tree-pass.h
        only if needed.  If tree-pass.h is included, do not include timevar.h
        and dumpfile.h.  If tree-pass.h is not included but dump_file, or
        dump_flags, or the TDF_* flags are used, include dumpfile.h.
        If gimple-pretty-print.h is included, don't include
        tree-pretty-print.h.  Remove assorted unnecessary includes.

        * config/mn10300/mn10300.c, config/c6x/c6x.c, config/ia64/ia64.c,
        config/arm/arm.c, config/bfin/bfin.c, config/frv/frv.c,
        config/spu/spu.c, config/mep/mep.c, config/i386/i386.c:
        Include dumpfile.h.
        * config/rl78/rl78.c: Include dumpfile.h instead of tree-pass.h.
        * arm/t-arm, avr/t-avr, i386/t-i386, ia64/t-ia64, mep/t-mep,
        spu/t-spu-elf: Fix dependencies.

2012-07-16  Dehao Chen  <dehao@google.com>

        Revert
        2012-07-10  Dehao Chen  <dehao@google.com>

        * tree.h (phi_arg_d): New field.
        * tree-flow-inline.h (gimple_phi_arg_block): New function.
        (gimple_phi_arg_block_from_edge): New function.
        (gimple_phi_arg_set_block): New function.
        (gimple_phi_arg_has_block): New function.
        (redirect_edge_var_map_block): New function.
        * tree-flow.h (_edge_var_map): New field.
        * tree-ssa-live.c (remove_unused_locals): Mark phi_arg's block as used.
        * tree-eh.c (cleanup_empty_eh_merge_phis): Add block debug info for
        redirect_edge_var_map_add.
        * tree-outof-ssa.c (_elim_graph): New field.
        (insert_partition_copy_on_edge): New parameter.
        (insert_value_copy_on_edge): New parameter.
        (insert_rtx_to_part_on_edge): New parameter.
        (insert_part_to_rtx_on_edge): New parameter.
        (elim_graph_add_edge): New parameter.
        (elim_graph_remove_succ_edge): New parameter.
        (FOR_EACH_ELIM_GRAPH_SUCC): New parameter.
        (FOR_EACH_ELIM_GRAPH_PRED): New parameter.
        (new_elim_graph): Add block debug info.
        (clear_elim_graph): Likewise.
        (delete_elim_graph): Likewise.
        (elim_graph_add_node): Likewise.
        (elim_graph_add_edge): Likewise.
        (elim_graph_remove_succ_edge): Likewise.
        (eliminate_build): Likewise.
        (elim_forward): Likewise.
        (elim_unvisited_predecessor): Likewise.
        (elim_backward): Likewise.
        (elim_create): Likewise.
        (eliminate_phi): Likewise.
        (insert_backedge_copies): Likewise.
        * tree-into-ssa.c (insert_phi_nodes_for): Add block debug info for
        add_phi_arg.
        (rewrite_add_phi_arguments): Likewise.
        * tree-ssa-loop-im.c (execute_sm_if_changed): Likewise.
        * tree-ssa-tail-merge.c (replace_block_by): Likewise.
        * tree-ssa-threadupdate.c (copy_phi_args): Likewise.
        * tree-loop-distribution.c (update_phis_for_loop_copy): Likewise.
        * tree-ssa-loop-manip.c (create_iv): Likewise.
        (add_exit_phis_edge): Likewise.
        (split_loop_exit_edge): Likewise.
        (copy_phi_node_args): Likewise.
        (tree_transform_and_unroll_loop): Likewise.
        * value-prof.c (gimple_ic): Likewise.
        (gimple_stringop_fixed_value): Likewise.
        * tree-tailcall.c (add_successor_phi_arg): Likewise.
        (eliminate_tail_call): Likewise.
        (create_tailcall_accumulator): Likewise.
        (tree_optimize_tail_calls_1): Likewise.
        * tree-phinodes.c (add_phi_arg): Likewise.
        (make_phi_node): Likewise.
        (resize_phi_node): Likewise.
        (remove_phi_arg_num): Likewise.
        * omp-low.c (expand_parallel_call): Likewise.
        (expand_omp_for_static_chunk): Likewise.
        * tree-vect-loop-manip.c (slpeel_update_phis_for_duplicate_loop):
        Likewise.
        (slpeel_update_phi_nodes_for_guard1): Likewise.
        (slpeel_update_phi_nodes_for_guard2): Likewise.
        (slpeel_tree_duplicate_loop_to_edge_cfg): Likewise.
        (set_prologue_iterations): Likewise.
        (slpeel_tree_peel_loop_to_edge): Likewise.
        (vect_loop_versioning): Likewise.
        * tree-parloops.c (create_phi_for_local_result): Likewise.
        (transform_to_exit_first_loop): Likewise.
        (create_parallel_loop): Likewise.
        * ipa-split.c (split_function): Likewise.
        * tree-vect-loop.c (get_initial_def_for_induction): Likewise.
        (vect_create_epilog_for_reduction): Likewise.
        * tree-vect-data-refs.c (vect_setup_realignment): Likewise.
        * graphite-scop-detection.c (canonicalize_loop_closed_ssa): Likewise.
        * tree-ssa-phiopt.c (cond_store_replacement): Likewise.
        (cond_if_else_store_replacement_1): Likewise.
        * tree-cfgcleanup.c (remove_forwarder_block): Likewise.
        (remove_forwarder_block_with_phi): Likewise.
        * tree-ssa-pre.c (insert_into_preds_of_block): Likewise.
        * tree-predcom.c (initialize_root_vars): Likewise.
        (initialize_root_vars_lm): Likewise.
        * sese.c (sese_add_exit_phis_edge): Likewise.
        * tree-ssa-dce.c (forward_edge_to_pdom): Likewise.
        * tree-ssa.c (flush_pending_stmts): Likewise.
        (redirect_edge_var_map_add): Likewise.
        (ssa_redirect_edge): Likewise.
        * gimple-streamer-in.c (input_phi): Likewise.
        * tree-vect-stmts.c (vectorizable_load): Likewise.
        * tree-inline.c (copy_phis_for_bb): Likewise.
        * tree-ssa-phiprop.c (phiprop_insert_phi): Likewise.
        * tree-switch-conversion.c (fix_phi_nodes): Likewise.
        * tree-cfg.c (reinstall_phi_args): Likewise.
        (gimple_make_forwarder_block): Likewise.
        (add_phi_args_after_copy_edge): Likewise.
        (gimple_duplicate_sese_tail): Likewise.

2012-07-16 Sergey Melnikov <sergey.melnikov@intel.com>

        * config/i386/i386.md (stack_protect_set): Disable the pattern
        for Android since Android libc (bionic) does not provide random
        value for stack protection guard at gs:0x14. Guard value
        will be provided from external symbol (default implementation).
        (stack_protect_set_<mode>): Likewise.
        (stack_protect_test): Likewise.
        (stack_protect_test_<mode>): Likewise.

2012-07-16  Hans-Peter Nilsson  <hp@axis.com>

        * config/cris/cris-protos.h (cris_legitimate_address_p): Declare.
        * config/cris/cris.h (CONSTANT_ADDRESS_P): Define in terms of
        CONSTANT_P and cris_legitimate_address_p.
        * config/cris/cris.c (cris_legitimate_address_p): Make non-static.
        (cris_preferred_reload_class): Don't return GENERAL_REGS as
        preferred to MOF_SRP_REGS.

        * config/cris/cris.c (cris_init_libfuncs): Handle initialization
        of library functions for basic atomic compare-and-swap.
        * config/cris/cris.h (TARGET_ATOMICS_MAY_CALL_LIBFUNCS): New macro.
        * config/cris/cris.opt (munaligned-atomic-may-use-library): New option.
        * config/cris/sync.md ("atomic_fetch_<atomic_op_name><mode>")
        ("cris_atomic_fetch_<atomic_op_name><mode>_1")
        ("atomic_compare_and_swap<mode>")
        ("cris_atomic_compare_and_swap<mode>_1"): Make conditional on
        TARGET_ATOMICS_MAY_CALL_LIBFUNCS for sizes larger than byte.
        * config/cris/cris.c (cris_print_operand) <case 'P', 'q'>: New cases.
        * config/cris/sync.md (atomic_op_op_cnstr): New code_attr.
        (atomic_op_op_pred): Ditto.
        (atomic_op_mnem_pre_op2): Renamed from atomic_op_mnem_pre; to
        reflect the change to include %2 in expansion.  All callers changed.
        (qm3): New mode_attr.
        ("atomic_fetch_<atomic_op_name><mode>"): Use <atomic_op_op_pred>
        as predicate for operand 2.
        ("cris_atomic_fetch_<atomic_op_name><mode>_1"): Update FIXME.  Use
        "<atomic_op_op_pred>" "<atomic_op_op_cnstr>" for predicate and
        constraint for operand 2.
        ("atomic_compare_and_swap<mode>"): Add FIXME.  Change predicate to
        nonmemory_operand for operand 3.
        ("cris_atomic_compare_and_swap<mode>_1"): Change operand 3 to
        exclude memory.  Improve emitted sync code for v10 and v32.  Use
        <qm3> instead of <m> for size designator for cmp.
        ("atomic_compare_and_swap<mode>"): Change predicate to
        nonmemory_operand for operand 3.  Add FIXME.
        ("cris_atomic_compare_and_swap<mode>_1"): Change predicates and
        constraints for operand 3 to exclude memory.
        ("atomic_fetch_<atomic_op_name><mode>")
        ("atomic_compare_and_swap<mode>"): Gate expand_mem_thread_fence
        calls on result of call to need_atomic_barrier_p.

2012-07-15  Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/mips.md (move_type): Replace mfhilo and mthilo
        with mflo and mtlo.
        (type): Split mfhilo into mfhi and mflo.  Split mthilo into mthi
        and mtlo.  Adjust move_type->type mapping.
        (may_clobber_hilo): Split mthilo into mthi and mtlo.
        (*movdi_32bit, *movdi_32bit_mips16, *movdi_64bit, *movdi_64bit_mips16)
        (*mov<mode>_internal, *mov<mode>_mips16, *movhi_internal)
        (*movhi_mips16, *movqi_internal, *movqi_mips16): Use mtlo and mflo
        instead of mthilo and mfhilo.
        (mfhi<GPR:mode>_<HILO:mode>): Use mfhi instead of mfhilo.
        (mthi<GPR:mode>_<HILO:mode>): Use mthi instead of mthilo.
        * config/mips/mips-dsp.md (mips_extr_w, mips_extr_r_w, mips_extr_rs_w)
        (mips_extr_s_h, mips_extp, mips_extpdp, mips_shilo, mips_mthlip):
        Use mflo instead of mfhilo.
        * config/mips/10000.md (r10k_arith): Split mthilo.
        (r10k_mfhi, r10k_mflo): Use mfhi and mflo directly.
        * config/mips/sb1.md (ir_sb1_mfhi, ir_sb1_mflo): Likewise.
        (ir_sb1_mthilo): Split mthilo into mthi and mtlo.
        * config/mips/20kc.md (r20kc_imthilo, r20kc_imfhilo): Split
        mthilo and mfhilo.
        * config/mips/24k.md (r24k_int_mfhilo, r24k_int_mthilo): Likewise.
        * config/mips/4130.md (vr4130_class, vr4130_mfhilo, vr4130_mthilo):
        Likewise.
        * config/mips/4k.md (r4k_int_mthilo, r4k_int_mfhilo): Likewise.
        * config/mips/5400.md (ir_vr54_hilo): Likewise.
        * config/mips/5500.md (ir_vr55_mthilo, ir_vr55_mfhilo): Likewise.
        * config/mips/5k.md (r5k_int_mthilo, r5k_int_mfhilo): Likewise.
        * config/mips/7000.md (rm7_mthilo, rm7_mfhilo): Likewise.
        * config/mips/74k.md (r74k_int_mfhilo, r74k_int_mthilo): Likewise.
        * config/mips/9000.md (rm9k_mfhilo, rm9k_mthilo): Likewise.
        * config/mips/generic.md (generic_hilo): Likewise.
        * config/mips/loongson2ef.md (ls2_alu): Likewise.
        * config/mips/loongson3a.md (ls3a_mfhilo): Likewise.
        * config/mips/octeon.md (octeon_imul_o1, octeon_imul_o2)
        (octeon_mfhilo_o1, octeon_mfhilo_o2): Likewise.
        * config/mips/sr71k.md (ir_sr70_hilo): Likewise.
        * config/mips/xlr.md (xlr_hilo): Likewise.

2012-07-14  Andrew Stubbs  <ams@codesourcery.com>
            Sandra Loosemore  <sandra@codesourcery.com>

        * config/sh/sh.h (SH_ASM_SPEC): Add spaces between options.

2012-07-14  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (ix86_set_reg_reg_cost): Enable TFmode/TCmode
        for TARGET_SSE.

2012-07-14  Steven Bosscher  <steven@gcc.gnu.org>

        * toplev.c (init_asm_output): Open asm_out_file in 'w' mode.

2012-07-13  Bill Schmidt  <wschmidt@linux.ibm.com>

        PR bootstrap/53955
        * config/spu/spu.c (spu_init_cost): Mark static.
        (spu_add_stmt_cost): Likewise.
        (spu_finish_cost): Likewise.
        (spu_destroy_cost_data): Likewise.
        * config/i386/i386.c (ix86_init_cost): Mark static.
        (ix86_add_stmt_cost): Likewise.
        (ix86_finish_cost): Likewise.
        (ix86_destroy_cost_data): Likewise.
        * config/rs6000/rs6000.c (rs6000_init_cost): Mark static.
        (rs6000_add_stmt_cost): Likewise.
        (rs6000_finish_cost): Likewise.
        (rs6000_destroy_cost_data): Likewise.

2012-07-13  Steven Bosscher  <steven@gcc.gnu.org>

        * ggc.h (ggc_internal_alloc_stat, ggc_alloc_typed_stat,
        ggc_internal_cleared_alloc_stat, ggc_cleared_alloc_htab_ignore_args,
        ggc_cleared_alloc_ptr_array_two_args, ggc_splay_alloc): Add
        ATTRIBUTE_MALLOC.
        * alloc-pool.h (pool_alloc): Likewise.

        * final.c (final): Do not loop to find max_uid.

2012-07-13  Steven Bosscher  <steven@gcc.gnu.org>

        * emit-rtl.c (make_debug_insn_raw, make_jump_insn_raw): Make static.
        * rtl.h (make_debug_insn_raw, make_jump_insn_raw): Remove prototypes.

2012-07-13  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53907
        * tree-ssa-forwprop.c (associate_pointerplus): New function.
        (ssa_forward_propagate_and_combine): Call it.

2012-07-13  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53922
        * tree-vrp.c (value_inside_range): Change prototype to take
        min/max instead of value-range.
        (range_includes_zero_p): Likewise.  Return the result from
        value_inside_range.
        (extract_range_from_binary_expr_1): Adjust to handle dont-know
        return value from range_includes_zero_p.
        (extract_range_from_unary_expr_1): Likewise.
        (compare_range_with_value): Likewise.
        (vrp_meet_1): Likewise.

2012-07-13  Bill Schmidt  <wschmidt@linux.ibm.com>

        * doc/tm.texi: Regenerate.
        * doc/tm.texi.in (TARGET_VECTORIZE_INIT_COST): New hook.
        (TARGET_VECTORIZE_ADD_STMT_COST): Likewise.
        (TARGET_VECTORIZE_FINISH_COST): Likewise.
        (TARGET_VECTORIZE_DESTROY_COST_DATA): Likewise.
        * targhooks.c (default_init_cost): New function.
        (default_add_stmt_cost): Likewise.
        (default_finish_cost): Likewise.
        (default_destroy_cost_data): Likewise.
        * targhooks.h (default_init_cost): New decl.
        (default_add_stmt_cost): Likewise.
        (default_finish_cost): Likewise.
        (default_destroy_cost_data): Likewise.
        * target.def (init_cost): New DEFHOOK.
        (add_stmt_cost): Likewise.
        (finish_cost): Likewise.
        (destroy_cost_data): Likewise.
        * target.h (struct _stmt_vec_info): New extern decl.
        (stmt_vectype): Likewise.
        (stmt_in_inner_loop_p): Likewise.
        * tree-vectorizer.h (stmt_info_for_cost): New struct/typedef.
        (stmt_vector_for_cost): New VEC/typedef.
        (add_stmt_info_to_vec): New function.
        (struct _slp_tree): Remove cost.inside_of_loop field.
        (struct _slp_instance): Remove cost.inside_of_loop field; add
        stmt_cost_vec field.
        (SLP_INSTANCE_INSIDE_OF_LOOP_COST): Remove macro.
        (SLP_INSTANCE_STMT_COST_VEC): New accessor macro.
        (SLP_TREE_INSIDE_OF_LOOP_COST): Remove macro.
        (struct _vect_peel_extended_info): Add stmt_cost_vec field.
        (struct _loop_vec_info): Add target_cost_data field.
        (LOOP_VINFO_TARGET_COST_DATA): New accessor macro.
        (struct _bb_vec_info): Add target_cost_data field.
        (BB_VINFO_TARGET_COST_DATA): New accessor macro.
        (struct _stmt_vec_info): Remove cost.inside_of_loop field.
        (STMT_VINFO_INSIDE_OF_LOOP_COST): Remove macro.
        (stmt_vinfo_set_inside_of_loop_cost): Remove function.
        (init_cost): New function.
        (add_stmt_cost): Likewise.
        (finish_cost): Likewise.
        (destroy_cost_data): Likewise.
        (vect_model_simple_cost): Change parameter list.
        (vect_model_store_cost): Likewise.
        (vect_model_load_cost): Likewise.
        (record_stmt_cost): New extern decl.
        (vect_get_load_cost): Change parameter list.
        (vect_get_store_cost): Likewise.
        * tree-vect-loop.c (new_loop_vec_info): Call init_cost.
        (destroy_loop_vec_info): Call destroy_cost_data.
        (vect_estimate_min_profitable_iters): Remove old calculation of
        inside costs; call finish_cost instead.
        (vect_model_reduction_cost): Call add_stmt_cost instead of old
        inside-costs calculation.
        (vect_model_induction_cost): Likewise.
        * tree-vect-data-refs.c (vect_get_data_access_cost): Change to
        return a stmt_vector_for_cost; modify calls to vect_get_load_cost
        and vect_get_store_cost to obtain the value to return.
        (vect_peeling_hash_get_lowest_cost): Obtain a stmt_cost_vec from
        vect_get_data_access_cost and store it in the minimum peeling
        structure.
        (vect_peeling_hash_choose_best_peeling): Change the parameter list
        to add a (stmt_vector_for_cost *) output parameter, and set its value.
        (vect_enhance_data_refs_alignment): Ignore the new return value from
        calls to vect_get_data_access_cost; obtain stmt_cost_vec from
        vect_peeling_hash_choose_best_peeling and pass its contents to the
        target cost model.
        * tree-vect-stmts.c (stmt_vectype): New function.
        (stmt_in_inner_loop_p): Likewise.
        (record_stmt_cost): Likewise.
        (vect_model_simple_cost): Add stmt_cost_vec parameter; call
        record_stmt_cost instead of old calculation; don't call
        stmt_vinfo_set_inside_of_loop_cost.
        (vect_model_promotion_demotion_cost): Call add_stmt_cost instead of
        old calculation; don't call stmt_vinfo_set_inside_of_loop_cost.
        (vect_model_store_cost): Add stmt_cost_vec parameter; call
        record_stmt_cost instead of old calculation; add stmt_cost_vec
        parameter to vect_get_store_cost call; don't call
        stmt_vinfo_set_inside_of_loop_cost.
        (vect_get_store_cost): Add stmt_cost_vec parameter; call
        record_stmt_cost instead of old calculation.
        (vect_model_load_cost): Add stmt_cost_vec parameter; call
        record_stmt_cost instead of old calculation; add stmt_cost_vec
        parameter to vect_get_load_cost call; don't call
        stmt_vinfo_set_inside_of_loop_cost.
        (vect_get_load_cost): Add stmt_cost_vec parameter; call
        record_stmt_cost instead of old calculation.
        (vectorizable_call): Add NULL parameter to vect_model_simple_cost call.
        (vectorizable_conversion): Likewise.
        (vectorizable_assignment): Likewise.
        (vectorizable_shift): Likewise.
        (vectorizable_operation): Likewise.
        (vectorizable_store): Add NULL parameter to vect_model_store_cost call.
        (vectorizable_load): Add NULL parameter to vect_model_load_cost call.
        (new_stmt_vec_info): Don't set STMT_VINFO_INSIDE_OF_LOOP_COST.
        * config/spu/spu.c (TARGET_VECTORIZE_INIT_COST): New macro def.
        (TARGET_VECTORIZE_ADD_STMT_COST): Likewise.
        (TARGET_VECTORIZE_FINISH_COST): Likewise.
        (TARGET_VECTORIZE_DESTROY_COST_DATA): Likewise.
        (spu_init_cost): New function.
        (spu_add_stmt_cost): Likewise.
        (spu_finish_cost): Likewise.
        (spu_destroy_cost_data): Likewise.
        * config/i386/i386.c (ix86_init_cost): New function.
        (ix86_add_stmt_cost): Likewise.
        (ix86_finish_cost): Likewise.
        (ix86_destroy_cost_data): Likewise.
        (TARGET_VECTORIZE_INIT_COST): New macro def.
        (TARGET_VECTORIZE_ADD_STMT_COST): Likewise.
        (TARGET_VECTORIZE_FINISH_COST): Likewise.
        (TARGET_VECTORIZE_DESTROY_COST_DATA): Likewise.
        * config/rs6000/rs6000.c (TARGET_VECTORIZE_INIT_COST): New macro def.
        (TARGET_VECTORIZE_ADD_STMT_COST): Likewise.
        (TARGET_VECTORIZE_FINISH_COST): Likewise.
        (TARGET_VECTORIZE_DESTROY_COST_DATA): Likewise.
        (rs6000_init_cost): New function.
        (rs6000_add_stmt_cost): Likewise.
        (rs6000_finish_cost): Likewise.
        (rs6000_destroy_cost_data): Likewise.
        * tree-vect-slp.c (vect_free_slp_instance): Free stmt_cost_vec.
        (vect_create_new_slp_node): Don't set SLP_TREE_INSIDE_OF_LOOP_COST.
        (vect_get_and_check_slp_defs): Add stmt_cost_vec parameter; add
        stmt_cost_vec parameter to vect_model_store_cost and
        vect_model_simple_cost calls.
        (vect_build_slp_tree): Remove inside_cost parameter; add stmt_cost_vec
        parameter; add stmt_cost_vec parameter to vect_get_and_check_slp_defs,
        vect_model_load_cost, and recursive vect_build_slp_tree calls; prevent
        calculating cost more than once for loads; remove inside_cost
        parameter from recursive vect_build_slp_tree calls; call
        record_stmt_cost instead of old calculation.
        (vect_analyze_slp_instance): Allocate stmt_cost_vec and save it with
        the instance; free it on premature exit; remove inside_cost parameter
        from vect_build_slp_tree call; add stmt_cost_vec parameter to
        vect_build_slp_tree call; don't set SLP_INSTANCE_INSIDE_OF_LOOP_COST.
        (new_bb_vec_info): Call init_cost.
        (destroy_bb_vec_info): Call destroy_cost_data.
        (vect_bb_vectorization_profitable_p): Call add_stmt_cost for each
        statement recorded with an SLP instance; call finish_cost instead of
        the old calculation.
        (vect_update_slp_costs_according_to_vf): Record statement costs from
        SLP instances, multiplying by the appropriate number of copies; don't
        update SLP_INSTANCE_INSIDE_OF_LOOP_COST.

2012-07-13  Richard Guenther  <rguenther@suse.de>

        PR middle-end/53937
        * builtins.c (get_pointer_alignment_1): Handle constant
        pointers.

2012-07-13  Richard Sandiford  <rdsandiford@googlemail.com>
            Steven Bosscher  <steven@gcc.gnu.org>
            Bernd Schmidt  <bernds@codesourcery.com>

        PR rtl-optimization/53908
        * df-problems.c (can_move_insns_across): When doing
        memory-reference book-keeping, handle call insns.

2012-07-13  Richard Guenther  <rguenther@suse.de>

        * gimple.c (gimple_types_compatible_p_1): Remove redundant
        type attribute comparisons.
        (gimple_canonical_types_compatible_p): Likewise.

2012-07-12  Hans-Peter Nilsson  <hp@axis.com>

        PR rtl-optimization/53176
        * rtlanal.c (rtx_cost): Adjust default cost for X with a
        UNITS_PER_WORD factor for all X according to the size of
        its mode, not just for SUBREGs with untieable modes.
        Handle SET.  Use factor * factor for MULT, DIV, UDIV,
        MOD, UMOD.

2012-07-12  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (QImode and HImode cmove splitters): Merge
        QImode and HImode splitters.  Use ix86_comparison_operator.
        Explicitly match FLAGS_REG.
        (DFmode cmove splitter): Explicitly match FLAGS_REG.

2012-07-11  Steven Bosscher  <steven@gcc.gnu.org>

        * expr.h (can_move_by_pieces): Move prototype from here ...
        * tree.h (can_move_by_pieces): ... to here.
        * optabs.h (set_widening_optab_handler): Use XCNEW.
        * gimplify.c: Do not include expr.h.

        * toplev.c: Do not include dwarf2out.h.
        * config/ia64/ia64.c: Likewise.
        * config/sparc/sparc.c: Likewise.
        * config/sparc/t-sparc (sparc.o): Fix dependencies.

        * Makefile.in (toplev.o): Fix dependencies
        (c-family/c-gimplify.o): Likewise.
        (c-family/c-common.o): Likewise.

2012-07-11  Steven Bosscher  <steven@gcc.gnu.org>

        * basic-block.h (struct edge_def): Use basic_block instead of
        basic_block_def *.
        * cfgloop.h (struct loop_exit, struct loop): Likewise.
        * gengenrtl.c (type_from_format): Likewise.  Also for 'tree'
        instead of union tree_node *.
        * rtl.h (union rtunion_def, emit_insn_before_noloc,
        emit_insn_after_noloc, add_insn_before, add_insn_after,
        debug_bb_slim): Likewise.
        * tree-inline.h (struct copy_body_data): Likewise.
        * sched-rgn.c (dump_region_dot): Likewise.
        * gimple.h (struct gimple_statement_base, gimple_set_bb,
        gsi_move_to_bb_end): Likewise.
        * sched-vis.c (debug_bb_slim): Likewise.
        (debug_bb_n_slim): Likewise.
        * config/mn10300/mn10300.c (mn10300_insert_setlb_lcc): Likewise.
        (mn10300_block_contains_call):

2012-07-11  Greta Yorsh  <Greta.Yorsh@arm.com>

        PR target/53859
        * config/arm/arm.c (arm_early_load_addr_dep): Handle new
        epilogue patterns.

2012-07-11  Jonathan Wakely  <jwakely.gcc@gmail.com>

        * doc/extend.texi (Namespace Association): Alter cautionary text.

2012-07-10  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/53911
        * config/sh/sh.md: Remove displacement addresssing related splits.

2012-07-10  Xinliang David Li  <davidxl@google.com>

        * doc/invoke.texi: New option documented.
        * flag-types.h: New enum type.
        * gimplify.c (gimplify_bind_expr): Control
        clobber generation with new option.
        (gimplify_target_expr): Ditto.
        * common.opt: New option.

2012-07-10  Julian Brown  <julian@codesourcery.com>

        * config/arm/arm.md (movsi): Don't split symbol refs here.
        (define_split): New.

2012-07-10  Andreas Schwab  <schwab@linux-m68k.org>

        PR bootstrap/53913
        * config/m68k/m68k.c (m68k_epilogue_uses): New.
        * config/m68k/m68k.h (EPILOGUE_USES): Use it.
        * config/m68k/m68k-protos.h (m68k_epilogue_uses): Add prototype.

2012-07-10  Richard Henderson  <rth@redhat.com>

        * target.def (builtin_mul_widen_even, builtin_mul_widen_odd): Remove.
        * system.h (TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_EVEN): Poison.
        (TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_ODD): Poison.
        * config/i386/i386.c (IX86_BUILTIN_VEC_WIDEN_SMUL_ODD_V4SI): Remove.
        (IX86_BUILTIN_VEC_WIDEN_SMUL_ODD_V8SI): Remove.
        (IX86_BUILTIN_VEC_WIDEN_UMUL_ODD_V4SI): Remove.
        (IX86_BUILTIN_VEC_WIDEN_UMUL_ODD_V8SI): Remove.
        (IX86_BUILTIN_VEC_WIDEN_SMUL_EVEN_V4SI): Remove.
        (IX86_BUILTIN_VEC_WIDEN_UMUL_EVEN_V4SI): Remove.
        (IX86_BUILTIN_VEC_WIDEN_UMUL_EVEN_V8SI): Remove.
        (bdesc_args): Remove entries to match.
        (ix86_builtin_mul_widen_even, ix86_builtin_mul_widen_odd): Remove.
        (TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_EVEN): Remove.
        (TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_ODD): Remove.
        * config/rs6000/rs6000.c (rs6000_builtin_mul_widen_even): Remove.
        (rs6000_builtin_mul_widen_odd): Remove.
        (TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_EVEN): Remove.
        (TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_ODD): Remove.
        * config/spu/spu.c (spu_builtin_mul_widen_even): Remove.
        (spu_builtin_mul_widen_odd): Remove.
        (TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_EVEN): Remove.
        (TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_ODD): Remove.
        * doc/tm.texi.in: Don't document the removed hooks.

        * tree-vect-stmts.c (supportable_widening_operation): Expand
        WIDEN_MULT_EXPR via VEC_WIDEN_MULT_EVEN/ODD_EXPR if possible.

        * expmed.c (expmed_mult_highpart): Rename from expand_mult_highpart.
        (expmed_mult_highpart_optab): Rename from expand_mult_highpart_optab.
        * optabs.c (can_mult_highpart_p): New.
        (expand_mult_highpart): New.
        * expr.c (expand_expr_real_2) [MULT_HIGHPART_EXPR): Use it.
        * tree-vect-generic.c (expand_vector_operations_1): Don't expand
        by pieces if can_mult_highpart_p.
        (expand_vector_divmod): Use can_mult_highpart_p and always
        generate MULT_HIGHPART_EXPR.
        * tree-vect-patterns.c (vect_recog_divmod_pattern): Likewise.
        * tree-vect-stmts.c (vectorizable_operation): Likewise.

        * config/spu/spu-builtins.md (spu_mpy): Move to spu.md.
        (spu_mpyu, spu_mpyhhu, spu_mpyhh): Likewise.
        * config/spu/spu.md (vec_widen_smult_odd_v8hi): Rename from spu_mpy.
        (vec_widen_umult_odd_v8hi): Rename from spu_mpyu.
        (vec_widen_smult_even_v8hi): Rename from spu_mpyhh.
        (vec_widen_umult_even_v8hi): Rename from spu_mpyhhu.
        * config/spu/spu-builtins.def: Update pattern names to match.

        * config/rs6000/altivec.md (vec_widen_umult_even_v16qi): Rename
        from altivec_vmuleub.
        (vec_widen_smult_even_v16qi): Rename from altivec_vmulesb.
        (vec_widen_umult_even_v8hi): Rename from altivec_vmuleuh.
        (vec_widen_smult_even_v8hi): Rename from altivec_vmulesh.
        (vec_widen_umult_odd_v16qi): Rename from altivec_vmuloub.
        (vec_widen_smult_odd_v16qi): Rename from altivec_vmulosb.
        (vec_widen_umult_odd_v8hi): Rename from altivec_vmulouh.
        (vec_widen_smult_odd_v8hi): Rename from altivec_vmulosh.
        * config/rs6000/rs6000-builtin.def: Update pattern names to match.

        * config/i386/sse.md (vec_widen_umult_even_v8si): Rename from
        avx2_umulv4siv4di3.
        (vec_widen_umult_even_v4si): Rename from sse2_umulv2siv2di3.
        (vec_widen_smult_even_v8si): Rename from avx2_mulv4siv4di3.
        (mulv4si3): Remove XOP test shadowed by SSE4 test.
        * config/i386/i386.c (bdesc_args): Update pattern names.
        (ix86_expand_sse2_mulvxdi3): Likewise.
        (ix86_expand_mul_widen_evenodd): Likewise.  Remove XOP test
        shadowed by SSE4 test.

        * tree.def (VEC_WIDEN_MULT_EVEN_EXPR, VEC_WIDEN_MULT_ODD_EXPR): New.
        * cfgexpand.c (expand_debug_expr): Handle them.
        * expr.c (expand_expr_real_2): Likewise.
        * fold-const.c (fold_binary_loc): Likewise.
        * gimple-pretty-print.c (dump_binary_rhs): Likewise.
        * optabs.c (optab_for_tree_code): Likewise.
        * tree-cfg.c (verify_gimple_assign_binary): Likewise.
        * tree-inline.c (estimate_operator_cost): Likewise.
        * tree-pretty-print.c (dump_generic_node): Likewise.
        * tree.c (commutative_tree_code): Likewise.
        * tree-vect-generic.c (expand_vector_operations_1): Likewise.
        Handle type change before looking up optab.
        * optabs.h (OTI_vec_widen_umult_even, OTI_vec_widen_umult_odd): New.
        (OTI_vec_widen_smult_even, OTI_vec_widen_smult_odd): New.
        (vec_widen_umult_even_optab, vec_widen_umult_odd_optab): New.
        (vec_widen_smult_even_optab, vec_widen_smult_odd_optab): New.
        * genopinit.c (optabs): Initialize them.
        * doc/md.texi: Document them.

2012-07-10  Dehao Chen  <dehao@google.com>

        * tree.h (phi_arg_d): New field.
        * tree-flow-inline.h (gimple_phi_arg_block): New function.
        (gimple_phi_arg_block_from_edge): New function.
        (gimple_phi_arg_set_block): New function.
        (gimple_phi_arg_has_block): New function.
        (redirect_edge_var_map_block): New function.
        * tree-flow.h (_edge_var_map): New field.
        * tree-ssa-live.c (remove_unused_locals): Mark phi_arg's block as used.
        * tree-eh.c (cleanup_empty_eh_merge_phis): Add block debug info for
        redirect_edge_var_map_add.
        * tree-outof-ssa.c (_elim_graph): New field.
        (insert_partition_copy_on_edge): New parameter.
        (insert_value_copy_on_edge): New parameter.
        (insert_rtx_to_part_on_edge): New parameter.
        (insert_part_to_rtx_on_edge): New parameter.
        (elim_graph_add_edge): New parameter.
        (elim_graph_remove_succ_edge): New parameter.
        (FOR_EACH_ELIM_GRAPH_SUCC): New parameter.
        (FOR_EACH_ELIM_GRAPH_PRED): New parameter.
        (new_elim_graph): Add block debug info.
        (clear_elim_graph): Likewise.
        (delete_elim_graph): Likewise.
        (elim_graph_add_node): Likewise.
        (elim_graph_add_edge): Likewise.
        (elim_graph_remove_succ_edge): Likewise.
        (eliminate_build): Likewise.
        (elim_forward): Likewise.
        (elim_unvisited_predecessor): Likewise.
        (elim_backward): Likewise.
        (elim_create): Likewise.
        (eliminate_phi): Likewise.
        (insert_backedge_copies): Likewise.
        * tree-into-ssa.c (insert_phi_nodes_for): Add block debug info for
        add_phi_arg.
        (rewrite_add_phi_arguments): Likewise.
        * tree-ssa-loop-im.c (execute_sm_if_changed): Likewise.
        * tree-ssa-tail-merge.c (replace_block_by): Likewise.
        * tree-ssa-threadupdate.c (copy_phi_args): Likewise.
        * tree-loop-distribution.c (update_phis_for_loop_copy): Likewise.
        * tree-ssa-loop-manip.c (create_iv): Likewise.
        (add_exit_phis_edge): Likewise.
        (split_loop_exit_edge): Likewise.
        (copy_phi_node_args): Likewise.
        (tree_transform_and_unroll_loop): Likewise.
        * value-prof.c (gimple_ic): Likewise.
        (gimple_stringop_fixed_value): Likewise.
        * tree-tailcall.c (add_successor_phi_arg): Likewise.
        (eliminate_tail_call): Likewise.
        (create_tailcall_accumulator): Likewise.
        (tree_optimize_tail_calls_1): Likewise.
        * tree-phinodes.c (add_phi_arg): Likewise.
        (make_phi_node): Likewise.
        (resize_phi_node): Likewise.
        (remove_phi_arg_num): Likewise.
        * omp-low.c (expand_parallel_call): Likewise.
        (expand_omp_for_static_chunk): Likewise.
        * tree-vect-loop-manip.c (slpeel_update_phis_for_duplicate_loop):
        Likewise.
        (slpeel_update_phi_nodes_for_guard1): Likewise.
        (slpeel_update_phi_nodes_for_guard2): Likewise.
        (slpeel_tree_duplicate_loop_to_edge_cfg): Likewise.
        (set_prologue_iterations): Likewise.
        (slpeel_tree_peel_loop_to_edge): Likewise.
        (vect_loop_versioning): Likewise.
        * tree-parloops.c (create_phi_for_local_result): Likewise.
        (transform_to_exit_first_loop): Likewise.
        (create_parallel_loop): Likewise.
        * ipa-split.c (split_function): Likewise.
        * tree-vect-loop.c (get_initial_def_for_induction): Likewise.
        (vect_create_epilog_for_reduction): Likewise.
        * tree-vect-data-refs.c (vect_setup_realignment): Likewise.
        * graphite-scop-detection.c (canonicalize_loop_closed_ssa): Likewise.
        * tree-ssa-phiopt.c (cond_store_replacement): Likewise.
        (cond_if_else_store_replacement_1): Likewise.
        * tree-cfgcleanup.c (remove_forwarder_block): Likewise.
        (remove_forwarder_block_with_phi): Likewise.
        * tree-ssa-pre.c (insert_into_preds_of_block): Likewise.
        * tree-predcom.c (initialize_root_vars): Likewise.
        (initialize_root_vars_lm): Likewise.
        * sese.c (sese_add_exit_phis_edge): Likewise.
        * tree-ssa-dce.c (forward_edge_to_pdom): Likewise.
        * tree-ssa.c (flush_pending_stmts): Likewise.
        (redirect_edge_var_map_add): Likewise.
        (ssa_redirect_edge): Likewise.
        * gimple-streamer-in.c (input_phi): Likewise.
        * tree-vect-stmts.c (vectorizable_load): Likewise.
        * tree-inline.c (copy_phis_for_bb): Likewise.
        * tree-ssa-phiprop.c (phiprop_insert_phi): Likewise.
        * tree-switch-conversion.c (fix_phi_nodes): Likewise.
        * tree-cfg.c (reinstall_phi_args): Likewise.
        (gimple_make_forwarder_block): Likewise.
        (add_phi_args_after_copy_edge): Likewise.
        (gimple_duplicate_sese_tail): Likewise.

2012-07-09  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/53886
        * config/sh/sh.c (sequence_insn_p): New function.
        (find_barrier, sh_insn_length_adjustment): Use it.

2012-07-09  Iain Sandoe  <iain@codesourcery.com>

        PR target/53283
        * config/i386/i386.c (ix86_fold_builtin): Call SUBTARGET_FOLD_BUILTIN
        if defined.
        * config/darwin.h: Rename TARGET_FOLD_BUILTIN to
        SUBTARGET_FOLD_BUILTIN.
        * config/rs6000/darwin.h: Map TARGET_FOLD_BUILTIN onto
        SUBTARGET_FOLD_BUILTIN.

2012-07-09  Iain Sandoe  <iain@codesourcery.com>

        * config/darwin.h (SUBTARGET_C_COMMON_OVERRIDE_OPTIONS): Move NeXT
        runtime exceptions model setting from here ...
        * config/darwin.c (darwin_override_options): ... to here.

2012-07-09  Steven Bosscher  <steven@gcc.gnu.org>

        PR tree-optimization/53887
        * tree-cfg.c (group_case_labels_stmt): Make non-static.
        * tree-flow.h (group_case_labels_stmt): Add prototype.
        * tree-switch-conversion.c (process_switch): Use group_case_labels_stmt
        to pre-process every switch.

2012-07-09  Jason Merrill  <jason@redhat.com>

        PR c++/53882
        * tree.c (type_contains_placeholder_1): Handle NULLPTR_TYPE.
        (type_hash_eq): Likewise.

2012-07-09  Tom de Vries  <tom@codesourcery.com>
            Richard Guenther  <rguenther@suse.de>

        * tree-ssa-ccp.c (optimize_unreachable): New function.
        (execute_fold_all_builtins): Use optimize_unreachable to optimize
        BUILT_IN_UNREACHABLE.  Don't optimize after BUILT_IN_UNREACHABLE.

2012-07-09  Richard Guenther  <rguenther@suse.de>

        PR bootstrap/53898
        * graphite-optimize-isl.c: Make sure CU is not empty.

2012-07-09  Steven Bosscher  <steven@gcc.gnu.org>

        * gensupport.c (init_rtx_reader_args_cb): Start counting code
        generating patterns from 1 to free up 0 for CODE_FOR_nothing.
        * gencodes.c (main): Give CODE_FOR_nothing the value 0.  Add
        the LAST_INSN_CODE marker at the end.
        * genoutput.c (nothing): New static struct data.
        (idata): Initialize to &nothing.
        (idata_end): Initialize to &nothing.next.
        (init_insn_for_nothing): New function to create dummy 'nothing' insn.
        (main): Use it.
        * genpeep.c (insn_code_number): Remove global variable.
        (gen_peephole): Take it as an argument instead.
        (main): Take insn_code_number from read_md_rtx.
        * optabs.h: Revert r161809:
        (optab_handlers): Change type of insn_code back to insn_code.
        (optab_handler, widening_optab_handler, set_optab_handler,
        set_widening_optab_handler, convert_optab_handler,
        set_convert_optab_handler, direct_optab_handler,
        set_direct_optab_handler): Remove int casts.
        Revert to treating the insn_code field as "insn_code".

2012-07-08  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.md (*return_i): Move trap_exit attribute check to ...
        * config/sh/sh.c (sh_cfun_trap_exit_p): ... this new function.
        * config/sh/sh-protos.h: Declare it.

2012-07-08  Steven Bosscher  <steven@gcc.gnu.org>

        * mcf.c: Do not include tm.h, tree.h, and langhooks.h.
        (dump_fixup_graph): Use current_function_name.
        (adjust_cfg_counts): Likewise.
        * ira-conflicts.c: Do not include tree.h.
        (ira_build_conflicts): Use REG_USERVAR_P instead of DECL_ARTIFICIAL.

2012-07-08  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/51244
        * config/sh/sh.md (*branch_true_eq, *branch_false_ne, nott): New insns.

2012-07-08  Steven Bosscher  <steven@gcc.gnu.org>

        * basic-block.h: Re-group most prototypes per file.
        (struct edge_list): Remove num_blocks field.
        (dump_bb_info): Adjust prototypes.
        (dump_reg_info): Move prototype to regs.h.
        * function.h: Do not include tree.h.
        Include vec.h, vecir.h, input.h and machmode.h to compensate.
        (function_name): New prototype.
        * gimple.h: Include tree.h to compensate for basic-block.h change.
        * langhooks.h: Note that tree.h is only necessary for enum tree_code.
        * regs.h (dump_reg_info): Prototype here.
        * regset.h: Adjust file reference in comment.
        (debug_regset): Remove prototype.
        * rtl.h: Include flags.h for flag_var_tracking_assignments.
        (MAY_HAVE_DEBUG_INSNS): Define as flag_var_tracking_assignments
        instead of no-longer-available tree.h's MAY_HAVE_DEBUG_STMTS.
        (dump_reg_info, dump_flow_info): Remove prototypes.
        * bb-reorder.c (set_edge_can_fallthru_flag): Move from cfganal.c
        to here, the only user.  Make static.
        (reorder_basic_blocks): Call dump_reg_info before dump_flow_info.
        * cfg.c: Do not include tm.h, tree.h, rtl.h, hard-reg-set.h, regs.h,
        flags.h, function.h, except.h, diagnostic-core.h, tm_p.h, timevar.h,
        tree-pass.h, cfgloop.h, and tree-flow.h.
        Include basic-block.h, the first header I'd expect to be included.
        (reg_obstack): Move to df-core.c.
        (free_edge): Remove bogus ATTRIBUTE_UNUSED.
        (remove_edge_raw): Do not call tree-ssa's redirect_edge_var_map_clear.
        (redirect_edge_succ_nodup): Move to cfghooks.c.
        (dump_regset, debug_regset): Move to df-core.c.
        (dump_bb_info): Move to cfgrtl.c.
        (dump_reg_info): Move to regstat.c.
        (dump_flow_info): Move to cfgrtl.c.
        (debug_flow_info): Likewise.
        (dump_edge_info): Do not look at cfun, a CFG without cfun is nonsense.
        * cfganal.c: Do not include tm.h, rtl.h, obstack.h, hard-reg-set.h,
        insn-config.h, recog.h, diagnostic-core.h, tm_p.h, and cfgloop.h.
        (flow_active_insn_p, forwarder_block_p, can_fallthru,
        could_fall_through): Move to cfgrtl.c.
        (set_edge_can_fallthru_flag): Moved to bb-reorder.c.
        (create_edge_list): Do not set edge_list's removed num_blocks.
        (print_edge_list): Look at n_basic_blocks instead of num_blocks.
        (flow_nodes_print): Remove.
        (flow_edge_list_print): Remove.
        (inverted_post_order_compute): Use FOR_ALL_BB.
        * cfgrtl.c (dump_flow_info): Moved from cfg.c.
        Do not call dump_reg_info.
        (debug_flow_info): Moved from cfg.c
        (dump_bb_info): Moved from cfg.c.  Take 'verbose' argument
        to avoid looking at TDF_* flags from tree-pass.h.
        (flow_active_insn_p, forwarder_block_p, can_fallthru,
        could_fall_through): Moved from cfganal.c.
        (print_rtl_with_bb): Adjust dump_bb_info calls.
        * cfghooks.c (redirect_edge_succ_nodup): Moved from cfg.c.
        (remove_edge): Call redirect_edge_var_map_clear if IR_GIMPLE.
        (cfgcleanup.c): Look at MAY_HAVE_DEBUG_INSNS, not MAY_HAVE_DEBUG_STMTS.
        * cselib.c: Include tree.h with a FIXME.
        * df-core.c (reg_obstack): Moved from cfg.c.
        (dump_regset): Likewise.
        (debug_regset): Likewise.  Make a DEBUG_FUNCTION.
        * final.c (compute_alignments): Call dump_reg_info before
        dump_flow_info.
        * function.c (function_name): New function.
        (current_function_name): Use it.
        * ifcvt.c (rest_of_handle_if_conversion): Call dump_reg_info before
        dump_flow_info.
        * ira-conflicts.c: Include tree.h with a note.
        * regstat.c (dump_reg_info): Moved here from cfg.c.
        * loop-init.c: Include regs.h instead of hard-reg-set.h.
        (rtl_loop_init): Call dump_reg_info before dump_flow_info.
        (rtl_loop_done): Likewise.
        * mcf.c: Include tree.h before langhooks.h.
        * predict.c (maybe_hot_count_p): Assert we have cfun.
        (probably_never_executed_bb_p): Likewise.
        * profile.c (compute_branch_probabilities): Use gimple_dump_cfg
        instead of dump_flow_info.
        * sched-deps.c: Include tree.h with a FIXME.
        (call_may_noreturn_p): Add FIXME note why this function has to
        look at function decls instead of function decl flags.
        * sched-vis.c: Include tree.h with a FIXME.
        (print_rtl_slim): Adjust dump_bb_info uses.
        * statistics.c (statistics_fini_pass_2): Use current_function_name
        to avoid including tree.h.
        (statistics_counter_event): Use function_name for the same reason.
        (statistics_histogram_event): Likewise.
        * tracer.c (tracer): Remove bogus gcc_assert.  Use brief_dump_cfg
        instead of dump_flow_info.
        * var-tracking.c (variable_tracking_main_1): Call dump_reg_info
        before dump_flow_info.
        * doc/cfg.texi: Update CFG documentation.
        * Makefile.in (RTL_H): Depend on FLAGS_H.
        (GIMPLE_H): Depend on TREE_H.
        (FUNCTION_H): Depend on VEC_H, vecir.h, INPUT_H and MACHMODE_H,
        but no longer on TREE_H.
        (C_COMMON_H): Depend on TREE_H.
        (cselib.o, cse.o, cfganal.o, loop-init.o, ira-conflicts.o,
        sched-deps.o, sched-vis.o): Fixup dependencies.

2012-07-08  Steven Bosscher  <steven@gcc.gnu.org>

        * alias.h: Do not include coretypes.h in header files.
        * cppbuiltin.h: Likewise.
        * double-int.h: Likewise.
        * gimple-fold.h: Likewise.
        * flags.h: Likewise.
        * tree-ssa-alias.h: Likewise.
        * gengtype.h (obstack_chunk_alloc, obstack_chunk_free,
        OBSTACK_CHUNK_SIZE): Define here to avoid dependency on coretypes.h.
        * Makefile.in (RTL_BASE_H): Depend on coretypes.h.
        (TREE_H): Likewise.
        (ALIAS_H): Do not depend on coretypes.h.
        (FLAGS_H): Likewise.
        (realmpfr.o): Depend on coretypes.h.

2012-07-08  Steven Bosscher  <steven@gcc.gnu.org>

        * Makefile.in (gengtype-lex.o, gengtype-parse.o, gengtype-state.o,
        gengtype.o): Add -DGENERATOR_FILE manually for host gengtype objects.

2012-07-07  Richard Earnshaw  <rearnsha@arm.com>

        * arm.h (TARGET_CPU_CPP_BUILTINS): Remove Maverick support.
        (TARGET_FPA): Delete definition.
        (TARGET_MAVERICK): Likewise.
        (TARGET_FPA_EMU2): Likewise.
        (arm_fp_model): Remove FPA and Maverick models.
        (arm_arch_cirrus): Delete declaration.
        (FLOAT_WORDS_BIG_ENDIAN): Delete definition.
        (FIXED_REGISTERS): Remove FPA and Maverick support.  Reorganize.
        (CALL_USED_REGISTERS): Likewise.
        (FIRST_FPA_REGNUM, LAST_FPA_REGNUM): Delete definition.
        (FIRST_VFP_REGNUM): Renumbered.
        (D7_VFP_REGNUM): Chain definition.
        (LAST_LO_VFP_REGNUM): Likewise.
        (FIRST_HI_VFP_REGNUM): Likewise.
        (LAST_HI_VFP_REGNUM): Likewise.
        (FIRST_IWMMXT_GR_REGNUM): Likewise.
        (LAST_IWMMXT_GR_REGNUM): Likewise.
        (FIRST_IWMMXT_REGNUM): Likewise.
        (LAST_IWMMXT_REGNUM): Likewise.
        (FRAME_POINTER_REGNUM): Renumbered.
        (ARG_POINTER_REGNUM): Renumbered.
        (FIRST_PSEUDO_REGISTER): Remove FPA and Maverick registers.
        (FIRST_CIRRUS_FP_REGNUM, LAST_CIRRUS_FP_REGNUM): Delete definitions.
        (HARD_REGNO_REGNUM): Remove FPA support.
        (REG_ALLOC_ORDER): Remove FPA and Maverick registers.  Reorganize.
        (reg_class): Likewise.
        (REG_CLASS_NAMES): Likewise.
        (REG_CLASS_CONTENTS): Likewise.
        (CANNOT_CHANGE_MODE_CLASS): Never true.  Update comment.
        (SECONDARY_INPUT_RELOAD_CLASS): Remove Maverick support.
        (CLASS_MAX_NREGS): Remove FPA and Maverick support.
        * aout.h (REGISTER_NAMES): Remove FPA and Maverick registers.
        Reorganize.  Use AAPCS preferred names.
        (ADDITIONAL_REGISTER_NAMES): Remove aliases for Maverick.  Update
        comments.
        (OVERLAPPING_REGISTER_NAMES): Update register numbering.
        * arm.c (FL_CIRRUS): Delete definition.
        (arm_arch_cirrus): Delete variable.
        (arm_float_words_big_endian): Delete function.
        (cirrus_memory_offset): Delete function.
        (output_mov_long_double_fpa_from_arm): Delete function.
        (output_mov_long_double_arm_from_fpa): Delete function.
        (output_mov_double_fpa_from_arm): Delete function.
        (output_mov_double_arm_from_fpa): Delete function.
        (emit_sfm): Delete function.
        (maybe_get_arm_condition_code): Update comment.
        (arm_file_start): Always use softvfp for softfloat systems.
        (thumb_core_reg_alloc_order): Adjust for updated register allocation.
        (arm_option_override): Remove FPA and Maverick support.  Always
        default to vfp as the fallback FPU format.
        (use_return_insn): Remove FPA support.
        (arm_get_frame_offsets): Likewise.
        (arm_save_coproc_regs): Likewise.
        (arm_canonicalize_comparison): Remove Maverick support.
        (arm_select_cc_mode): Likewise.
        (arm_gen_compare_reg): Likewise.
        (arm_print_operand): Likewise.
        (arm_libcall_value_1): Remove FPA and Maverick support.
        (arm_function_value_regno_p): Likewise.
        (arm_apply_result_size): Likewise.
        (arm_legitimate_index_p): Likewise.
        (thumb2_legitimate_index_p): Likewise.
        (legitimize_reload_address): Likewise.
        (arm_register_move_cost): Likewise.
        (arm_hard_regno_mode_ok): Likewise.
        (arm_regno_class): Likewise.
        (arm_dbx_register_number): Likewise.
        (arm_emit_unwind_sequence): Likewise.
        (arm_conditional_register_usage): Likewise.
        * arm-protos.h (neg_const_double_rtx_ok_for_fpa): Remove declaration.
        (cirrus_memory_offset): Likewise.
        (output_move_long_double_fpa_from_arm): Likewise.
        (output_move_long_double_arm_from_fpa): Likewise.
        (output_move_double_fpa_from_arm): Likewise.
        (output_move_double_arm_from_fpa): Likewise.
        (arm_float_words_big_endian): Likewise.
        * arm.md (CC_REGNUM): Renumbered.
        (VFPCC_REGNUM): Moved here.  Renumbered.
        (FPA_F0_REGNUM, FPA_F7_REGNUM): Delete.
        (attr fpu): Remove FPA and Maverick support.
        * vfp.md (VFPCC_REGNUM): Delete.  Moved to arm.md.
        * arm-cores.def (ep9312): Remove Maverick support.
        * arm-arches.def (ep9312): Delete architecture.
        * arm-tables.opt: Regenerated.

        * arm/linux-elf.h (FPUTYPE_DEFAULT): Set to vfp.

2012-07-07  Steven Bosscher  <steven@gcc.gnu.org>

        PR tree-optimization/53881
        * tree-switch-conversion.c (emit_case_bit_tests): Do not rely on
        comparing labels to establish uniqueness of a switch case target,
        use the CFG instead.

2012-07-07  Ulrich Weigand  <ulrich.weigand@linaro.org>

        * combine.c (force_to_mode) [LSHIFTRT]: Avoid undefined behaviour
        due to negative shift amount.

2012-07-07  Hans-Peter Nilsson  <hp@axis.com>

        Fix configure test for "stack protector support in target C library".
        * configure.ac (test_prefix, test_exec_prefix): Move setting from
        inside sysroot handling to before and outside it.
        * configure: Regenerate.

2012-07-06  Kai Tietz  <ktietz@redhat.com>

        PR bootstrap/52947
        * config/i386/mingw32.h (NATIVE_SYSTEM_HEADER_DIR): Define it always
        as "/mingw/include".

2012-07-06  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/53820
        * var-tracking.c (vt_add_function_parameter): Convert
        internal_arg_pointer into arg_pointer-based address even
        without DRAP.

2012-07-06  Alexandre Oilva  <aoliva@redhat.com>

        PR rtl-optimization/53827
        PR debug/53671
        PR debug/49888
        * alias.c (memrefs_conflict_p): Adjust offset and size by the
        same amount for alignment ANDs.

2012-07-06  Tom de Vries  <tom@codesourcery.com>

        PR tree-optimization/51879
        * tree-ssa-sccvn.c (copy_reference_ops_from_call)
        (visit_reference_op_call): Handle case that lhs is not an SSA_NAME.
        (visit_use): Also call visit_reference_op_call for calls with a vdef.

2012-07-06  Tom de Vries  <tom@codesourcery.com>

        PR tree-optimization/52009
        * tree-ssa-tail-merge.c (gimple_equal_p): For GIMPLE_ASSIGN, compare
        value numbers of gimple_vdef.
        * tree-ssa-sccvn.h (vn_reference_insert): Add vdef parameter to
        prototype.
        * tree-ssa-sccvn.c (copy_reference_ops_from_ref): Handle MODIFY_EXPR.
        (vn_reference_insert): Add and handle vdef parameter.
        (visit_reference_op_load): Add argument to vn_reference_insert call.
        (visit_reference_op_store): Find value number of vdef of store.  Insert
        value number of vdef of store.

2012-07-06  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (simple lea to add peephole): Also transform
        RTXes where second PLUS operand matches output.

2012-07-06  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (construct_plt_address): Make static.
        * config/i386/i386-protos.h (construct_plt_address): Remove.

2012-07-06  Nick Clifton  <nickc@redhat.com>

        * config/mn10300/mn10300.c (mn10300_encode_section_info): Call
        default_encode_section_info.

2012-07-06  Uros Bizjak  <ubizjak@gmail.com>

        PR target/53853
        * config/i386/i386.c (x86_output_mi_thunk): For CM_LARGE_PIC model,
        emit PIC sequence for fnaddr symbol reference in advance.

2012-07-06  Eric Botcazou  <ebotcazou@adacore.com>

        Revert
        2012-06-14  Eric Botcazou  <ebotcazou@adacore.com>

        * dwarf2out.c (function_possibly_abstracted_p): New static function.
        (gen_subprogram_die): Use it function_possibly_abstracted_p in lieu of
        cgraph_function_possibly_inlined_p.
        (gen_inlined_subroutine_die): Return if the origin is to be ignored.
        (process_scope_var): Do not emit concrete instances of abstracted
        nested functions from here.
        (gen_decl_die): Emit the abstract instance if the function is possibly
        abstracted and not only possibly inlined.
        (dwarf2out_finish): Find the first non-abstract parent instance and
        attach concrete instances on the limbo list to it.

2012-07-05  Ramana Radhakrishnan  <ramana.radhakrishnan@linaro.org>
            Julian Brown  <julian@codesourcery.com>

        PR target/48941
        PR target/51980
        * config/arm/neon-gen.ml (return_by_ptr): Delete.
        (print_function): Handle empty strings.
        (return): Delete use of return_by_ptr.
        (mask_shape_for_shuffle): New function.
        (mask_elems): Likewise.
        (shuffle_fn): Likewise.
        (params): Simplify and remove use of return_by_ptr.
        (get_shuffle): New function.
        (print_variant): Update.
        * config/arm/neon.ml (rev_elems): New function.
        (permute_range): Likewise.
        (zip_range): Likewise.
        (uzip_range): Likewise.
        (trn_range): Likewise.
        (zip_elems): Likewise.
        (uzip_elems): Likewise.
        (trn_elems): Likewise.
        (features): New enumeration Use_shuffle. Delete ReturnPtr.
        (pf_su_8_16): New.
        (suf_32): New.
        (ops): Update entries for Vrev64, Vrev32, Vrev16, Vtr, Vzip, Vuzp.
        * config/arm/arm_neon.h: Regenerate.

2012-07-05  Richard Guenther  <rguenther@suse.de>

        * tree-pretty-print.c (dump_generic_node): Properly test
        the result of exact_log2.

2012-07-05  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * config/s390/s390-protos.h (s390_expand_movmem)
        (s390_expand_cmpmem): Add return value.
        * config/s390/s390.c (s390_expand_movmem, s390_expand_cmpmem):
        Return FALSE to use the library function in some cases.
        * config/s390/s390.md (movmem, cmpmem): Evaluate return value of C
        helper functions.

2012-07-05  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * config.gcc: Enable ifunc attribute by default on s390 and s390x.

2012-07-05  Steven Bosscher  <steven@gcc.gnu.org>

        * expr.c (try_casesi): Remove bogus ATTRIBUTE_UNUSED markers.
        * stmt.c (dump_case_nodes): New.
        (expand_case): Split out code generation parts into new functions.
        (expand_switch_as_decision_tree_p): Split out from expand_case.
        (emit_case_decision_tree): Likewise.
        (emit_case_dispatch_table): Likewise.

2012-07-05  Matthew Gretton-Dann  <matthew.gretton-dann@arm.com>

        * config/arm/iterators.md (SDF): New mode iterator.
        (V_if_elem): Add support for SF and DF modes.
        (V_reg): Likewise.
        (F_constraint): New mode iterator attribute.
        (F_fma_type): Likewise.
        config/arm/vfp.md (fma<SDF:mode>4): New pattern.
        (*fmsub<SDF:mode>4): Likewise.
        (*fmnsub<SDF:mode>4): Likewise.
        (*fmnadd<SDF:mode>4): Likewise.

2012-07-04  Uros Bizjak  <ubizjak@gmail.com>

        * expmed.c (expand_mult): Initialize coeff and is_neg.

2012-07-04  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/predicates.md (zero_extend_operand): New predicate.
        * config/sh/sh.md (zero_extendhisi2): Simplify by using new
        zero_extend_operand predicate.
        (zero_extendqisi2): Likewise.

2012-07-04  Uros Bizjak  <ubizjak@gmail.com>

        PR middle-end/53321
        * ipa.c (symtab_remove_unreachable_nodes): Partially revert r187375
        to not call cgraph_propagate_frequency if something was changed.

2012-07-04  Richard Guenther  <rguenther@suse.de>

        PR middle-end/53433
        * gimple-fold.c (get_base_constructor): Do not return an
        error_mark_node DECL_INITIAL.

2012-07-04  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53844
        * tree-ssa-dse.c (dse_possible_dead_store_p): Properly handle
        the loop virtual PHI.

2012-07-04  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53849
        * tree-cfg.c (move_stmt_op): Only call add_referenced_var
        for duplicated locals.  Use add_referenced_var_1 to avoid
        pushing/popping cfun.

2012-07-04  Kai Tietz  <ktietz@redhat.com>

        * config/i386/winnt.c (i386_pe_reloc_rw_mask): New function.
        * config/i386/i386-protos.h (i386_pe_reloc_rw_mask): Add
        prototype.
        * config/i386/cygming.h (TARGET_ASM_RELOC_RW_MASK): Define
        as i386_pe_reloc_rw_mask.

2012-07-04  Richard Guenther  <rguenther@suse.de>

        * tree.c (find_decls_types_r): Handle TYPE_CONTEXT the same
        as in free_lang_data_in_type.

2012-07-04  Tobias Grosser <tobias@grosser.es>
            Michael Matz  <matz@suse.de>

        * Makefile.in (OBJS): Add graphite-optimize-isl.o.
        (graphite-optimize-isl.o): Add dependencies.
        * common.opt (floop-nest-optimize): New flag.
        * doc/invoke.texi (floop-nest-optimize): Document.
        * graphite-dependences.c (compute_deps): Export.
        * graphite-poly.h (compute_deps): Declare.
        * graphite-optimize-isl.c: New file.
        * graphite-poly.c (apply_poly_transforms): Run the loop
        nest optimizer.
        * tree-ssa-loop.c (gate_graphite_transforms): Enable graphite
        if -floop-nest-optimize is enabled.

2012-07-03  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/predicates.md (logical_and_operand): New predicate.
        * config/sh/constraints.md (Jmb, Jmw): New constraints.
        * config/sh/sh.md (andsi3): Move expander above insns.  Add handling
        of 0xFFFF constant.  Use logical_and_operand predicate and
        satisfies_constraint_Jmb, satisfies_constraint_Jmw.
        (*andsi3_compact): Make it an insn_and_split.  Use
        logical_and_operand predicate.  Add Jmb,Jmw alternatives.

2012-07-03  Jason Merrill  <jason@redhat.com>

        PR c++/53826
        * tree.c (build_zero_cst): Handle NULLPTR_TYPE.

2012-07-03  Nick Clifton  <nickc@redhat.com>

        * config/mep/mep.c (mep_reorg_regmove): Use
        next_nonnote_non_debug_insn to advance to the next insn.  Do not
        expect delete_insn to return an rtx.

2012-07-03  Richard Guenther  <rguenther@suse.de>

        * doc/install.texi (CLooG): Clarify how CLooG needs to be
        configured and that it needs to be built against ISL 0.10.

2012-07-03  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (ix86_option_override_internal): Fix wrong
        code model string in the error message.

2012-07-03  Uros Bizjak  <ubizjak@gmail.com>

        PR target/53811
        * config/i386/i386.c (x86_output_mi_thunk): Check if fnaddr satisfies
        sibcall_insn_operand.  Move it to a temporary register if not.

2012-07-03  Andreas Schwab  <schwab@linux-m68k.org>

        PR target/28896
        * config/m68k/m68k.c (m68k_option_override): Reset stack_limit_rtx
        if !TARGET_68020.

2012-07-03  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/xmmintrin.h (_mm_sfence): Use __builtin_ia32_pause.

2012-07-03  Roland McGrath  <mcgrathr@google.com>

        * configure.ac (HAVE_AS_IX86_REP_LOCK_PREFIX): Also require that the
        assembler accept 'rep bsf ...', 'rep bsr ...', 'rep ret' and 'rep nop'.
        * configure: Regenerated.
        * config/i386/i386.md (simple_return_internal_long): Use %;
        (ctz<mode>2): Likewise.
        (*pause): Likewise.

2012-07-02  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/51244
        * config/sh/predicates.md (t_reg_operand, negt_reg_operand): New
        predicates.
        * config/sh/sh-protos.h (get_t_reg_rtx): New prototype.
        * config/sh/sh.c (get_t_reg_rtx): New function.  Use it when invoking
        gen_branch_true and gen_branch_false.
        * config/sh/sh.md: Use get_t_reg_rtx when invoking gen_branch_true and
        gen_branch_false.
        (branch_true, branch_false): Use t_reg_operand predicate.
        (*branch_true, *branch_false): Delete.
        (movt): Use t_reg_operand predicate.
        (*negnegt): Use negt_reg_operand predicate and fold little and big
        endian variants.
        (*movtt): Use t_reg_operand and fold little and big endian variants.
        (*movt_qi): Delete.

2012-07-02  Steven Bosscher  <steven@gcc.gnu.org>

        * stmt.c (emit_case_bit_tests): Remove.
        (expand_case): Remove expand_switch_using_bit_tests_p code.
        * tree-switch-conversion.c (hoist_edge_and_branch_if_true): New.
        (MAX_CASE_BIT_TESTS): Moved from stmt.c to here.
        (lshift_cheap_p): Likewise.
        (expand_switch_using_bit_tests_p): Likewise.
        (struct case_bit_test): Likewise.
        (case_bit_test_cmp): Likewise.
        (emit_case_bit_tests): New implementation for GIMPLE.
        (gen_inbound_check): Do not release post-dominator info here.
        (process_switch): Reorder code.  Expand as bit tests if it
        looks like a win.
        (do_switchconv): Release post-dominator info here if something changed.
        (struct gimple_opt_pass): Verify more.
        * tree.h (expand_switch_using_bit_tests_p): Remove prototype.

2012-07-02  Martin Jambor  <mjambor@suse.cz>

        PR middle-end/38474
        * ipa-prop.c (compute_known_type_jump_func): Put BINFO check before a
        dynamic type change check.

2012-07-02  Richard Guenther  <rguenther@suse.de>
            Michael Matz  <matz@suse.de>
            Tobias Grosser <tobias@grosser.es>
            Sebastian Pop <sebpop@gmail.com>

        * Makefile.in: Remove PPL flags in favor of ISL ones.
        (BACKENDLIBS): Remove PPL libs.
        (INCLUDES): Remove PPL includes in favor of ISL ones.
        (graphite-clast-to-gimple.o): Remove graphite-dependences.h and
        graphite-cloog-compat.h dependencies.
        (graphite-dependences.o): Likewise.
        (graphite-poly.o): Likewise.
        * configure.ac: Declare ISL vars instead of PPL ones.
        * configure: Regenerated.
        * doc/install.texi: Replace PPL requirement documentation with ISL one.
        * graphite-blocking.c: Remove PPL code, add ISL equivalent.
        * graphite-clast-to-gimple.c: Likewise.
        * graphite-dependences.c: Likewise.
        * graphite-interchange.c: Likewise.
        * graphite-poly.h: Likewise.
        * graphite-poly.c: Likewise.
        * graphite-sese-to-poly.c: Likewise.
        * graphite.c: Likewise.
        * graphite-scop-detection.c: Re-arrange includes.
        * graphite-cloog-util.c: Remove.
        * graphite-cloog-util.h: Likewise.
        * graphite-ppl.h: Likewise.
        * graphite-ppl.c: Likewise.
        * graphite-dependences.h: Likewise.

2012-07-02  Richard Guenther  <rguenther@suse.de>

        Merge from graphite branch
        2011-07-21  Tobias Grosser  <tobias@grosser.es>

        * Makefile.in (graphite-clast-to-gimple.o, graphite-cloog-util.o):
        Remove graphite-cloog-util.h.
        * graphite-clast-to-gimple.c (gcc_type_for_iv_of_clast_loop,
        build_iv_mapping, translate_clast_user, translate_clast,
        free_scattering, initialize_cloog_names, build_cloog_prog,
        create_params_index): Do not use old compatibility functions.
        (clast_name_to_index, set_cloog_options): Remove code for legacy cloog.
        * graphite-cloog-util.c (openscop_print_cloog_matrix): Do not use old
        compatibility functions.
        (new_Cloog_Scattering_from_ppl_Polyhedron): Remove code for legacy
        cloog.
        * graphite-cloog-util.h: Remove include of graphite-cloog-util.h.
        * graphite.c (graphite.c): Do not call outdated cloog_initialize() and
        cloog_finalize().
        * graphite-cloog-compat.h: Remove.

        2011-08-09  Tobias Grosser <tobias@grosser.es>

        * graphite-clast-to-gimple.c (new_clast_name_index): Store a copy
        of the string, no just a reference.
        (clast_name_index): Add a new field, that specifies if we need to free
        the name.
        (free_clast_name_index): If necessary, free the name string.
        (clast_name_index_elt_info): Calculate the hash based on the string
        content, not the memory location it is stored in.
        (clast_name_to_level): Specify that we do not need to free the name.
        (clast_name_to_index): Dito.
        (clast_name_to_lb_ub): Dito.
        (eq_clast_name_indexes): Compare the strings, not their base pointers.
        (free_scattering): Removed.
        (initialize_cloog_names): Renamed to add_names_to_union_domain().
        (add_names_to_union_domain): Changed to work on a union_domain,
        instead of a CloogNames structure.
        (build_cloog_prog): Removed.
        (build_cloog_union_domain): New.
        (generate_cloog_input): New.
        (scop_to_clast): Use CloogInput instead of CloogProgram.
        (print_generated_program): Adapt to new scop_to_clast() and do not
        print the CloogProgram any more.
        (create_params_index): Removed, functionality integrated in
        add_names_to_union_domain().
        (gloog): Adapt to new scop_to_clast().
        * graphite-clast-to-gimple.h (scop_to_clast): Remove.

        2012-01-11  Tobias Grosser <tobias@grosser.es>

        * graphite-clast-to-gimple.c (clast_name_to_index,
        clast_name_to_lb_ub, clast_name_to_gcc): Change types.
        (clast_to_gcc_expression): Add clast_expr_name as a new
        case. Do not assume a clast_expr_term points always to a
        clast_expr_name.
        (type_for_clast_term): Do not assume a clast_expr_term points always to
        a clast_expr_name.
        (type_for_clast_name): New.
        (type_for_clast_expr): Add clast_expr_name as a new case.

        2011-08-03  Sebastian Pop <sebpop@gmail.com>

        * graphite-cloog-util.c (new_Cloog_Domain_from_ppl_Polyhedron,
        new_Cloog_Scattering_from_ppl_Polyhedron,
        new_Cloog_Domain_from_ppl_Pointset_Powerset): Remove ATTRIBUTE_UNUSED.

2012-07-02  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/53645
        * tree-vect-generic.c (expand_vector_divmod): Use TYPE_MODE (type)
        instead of TYPE_MODE (wider_type) as can_vec_perm_p argument.

2012-07-01  Wei Guozhi  <carrot@google.com>

        PR target/53447
        * config/arm/arm-protos.h (const_ok_for_dimode_op): New prototype.
        * config/arm/arm.c (const_ok_for_dimode_op): New function.
        * config/arm/constraints.md (Dd): New constraint.
        * config/arm/predicates.md (arm_adddi_operand): New predicate.
        * config/arm/arm.md (adddi3): Extend it to handle constants.
        (arm_adddi3): Likewise.
        (addsi3_carryin_<optab>): Extend it to handle sbc case.
        (addsi3_carryin_alt2_<optab>): Likewise.
        * config/arm/neon.md (adddi3_neon): Extend it to handle constants.

2012-06-30  Nathan Sidwell  <nathan@acm.org>

        * coverage.c (bbg_file_stamp): New.
        (read_counts_file): Merge incoming stamp with bbg_file_stamp.
        (build_info): Write bbg_file_stamp.
        (coverage_init): Initialize bbg_file_stamp.  Read counts file
        before writing graph header.
        (coverage_finish): Don't unlink the data file if we can generate a
        unique file stamp.
        * tree.h (crc32_unsigned): Declare.
        * tree.c (crc32_unsigned_bits): New, broken out of ...
        (crc32_byte): ... here.  Use it.
        (crc32_unsigned): New.

2012-06-29  Cary Coutant  <ccoutant@google.com>

        * dwarf2out.c (add_pubname_string): Don't check for want_pubnames.
        (gen_subprogram_die): Don't add pubname if want_pubnames is false.
        (gen_variable_die): Likewise.
        (gen_namespace_die): Likewise.

2012-06-29  Eric Botcazou  <ebotcazou@adacore.com>

        * tree-eh.c (lower_try_finally_switch): Really put the location of the
        last statement of the finally block onto the switch.

2012-06-29  H.J. Lu  <hongjiu.lu@intel.com>

        PR target/53539
        * config/i386/gnu-user64.h (WCHAR_TYPE): Use "int" only for
        TARGET_LP64.

2012-06-29  Sterling Augustine  <saugustine@google.com>

        * dwarf2out.c (add_pubname): Add comment.
        (add_pubtype): Fix indentation.
        (gen_enumeration_type_die): Likewise.

2012-06-29  Jakub Jelinek  <jakub@redhat.com>

        * tree-vect-generic.c (expand_vector_divmod): For even/odd
        widening multiply, put even always as first argument to VEC_PERM_EXPR.

2012-06-29  Richard Henderson  <rth@redhat.com>

        * tree-vect-generic.c: Include target.h.
        (expand_vector_divmod): Use builtin_mul_widen_even/odd if supported.
        * Makefile.in (tree-vect-generic.o): Update.

2012-06-29  Steven Bosscher  <steven@gcc.gnu.org>

        * configure.ac: Remove special gtfiles case for C.
        * configure: Regenerate.
        * Makefile.in: Remove C front-end hooks and build hooks that
        will be picked up from c/Make-lang.in now.
        Add tree-mudflap to C_COMMON_OBJS.
        * gengtype.c (files_rules): Adjust gt-files for c/c-decl.c.
        * config/vms/vms.c: Look for c-tree.h in c/.
        * doc/gty.texi: Remove reference to c-config-lang.in.
        * doc/sourcebuild.texi: Document the c/ subdirectory.

2012-06-29  Steven Bosscher  <steven@gcc.gnu.org>

        * system.h (CASE_USE_BIT_TESTS): Poison.
        * stmt.c (CASE_USE_BIT_TESTS): Fold away into its only user ...
        (expand_switch_using_bit_tests_p): ...here.
        * doc/tm.texi.in (CASE_USE_BIT_TESTS): Remove documentation.
        * doc/tm.texi (CASE_USE_BIT_TESTS): Regenerate.

2012-06-29  Steven Bosscher  <steven@gcc.gnu.org>

        * system.h (IFCVT_EXTRA_FIELDS): Poison.
        (IFCVT_INIT_EXTRA_FIELDS): Poison.
        * basic-block.h (struct ce_if_block): Remove IFCVT_EXTRA_FIELDS.
        * ifcvt.c (find_if_header): Use IFCVT_MACHDEP_INIT instead of
        IFCVT_INIT_EXTRA_FIELDS.
        * gengtype-parse.c (struct_field_seq): Remove obsolete comment.
        * config/frv/frv.h (IFCVT_INIT_EXTRA_FIELDS): Rename to
        IFCVT_MACHDEP_INIT.
        * config/frv/frv.c (frv_ifcvt_init_extra_fields): Rename to
        frv_ifcvt_machdep_init.
        * doc/tm.texi.in (IFCVT_INIT_EXTRA_FIELDS, IFCVT_EXTRA_FIELDS):
        Remove documentation.
        (IFCVT_MACHDEP_INIT): Document.
        * doc/tm.texi: Regenerate.

2012-06-29  Nick Clifton  <nickc@redhat.com>

        * config/lm32/lm32.c (lm32_compute_frame_size): Fix typo.

2012-06-29  Jakub Jelinek  <jakub@redhat.com>

        * tree-vect-stmts.c (vectorizable_operation): Check both
        VEC_WIDEN_MULT_LO_EXPR and VEC_WIDEN_MULT_HI_EXPR optabs.
        Verify that operand[0]'s mode is TYPE_MODE (wide_vectype).

2012-06-28  Richard Henderson  <rth@redhat.com>

        * doc/generic.texi (MULT_HIGHPART_EXPR): Document it.

2012-06-28  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/51581
        * tree-vect-stmts.c (permute_vec_elements): Add forward decl.
        (vectorizable_operation): Handle vectorization of MULT_HIGHPART_EXPR
        also using VEC_WIDEN_MULT_*_EXPR or builtin_mul_widen_* plus
        VEC_PERM_EXPR if vector MULT_HIGHPART_EXPR isn't supported.
        * tree-vect-patterns.c (vect_recog_divmod_pattern): Use
        MULT_HIGHPART_EXPR instead of VEC_WIDEN_MULT_*_EXPR and shifts.

        PR tree-optimization/53645
        * tree-vect-generic.c (expand_vector_divmod): Use MULT_HIGHPART_EXPR
        instead of VEC_WIDEN_MULT_{HI,LO}_EXPR followed by VEC_PERM_EXPR
        if possible.

2012-06-28  Georg-Johann Lay  <avr@gjlay.de>

        PR 53595
        * config/avr/avr.c (avr_hard_regno_call_part_clobbered): New.
        * config/avr/avr-protos.h (avr_hard_regno_call_part_clobbered): New.
        * config/avr/avr.h (HARD_REGNO_CALL_PART_CLOBBERED): Forward to
        avr_hard_regno_call_part_clobbered.

2012-06-28  Richard Guenther  <rguenther@suse.de>

        PR middle-end/53790
        * expr.c (expand_expr_real_1): Verify if the type is complete
        before inspecting its size.

2012-06-28  Andreas Schwab  <schwab@linux-m68k.org>

        * doc/include/gpl.texi: Remove.
        * doc/sourcebuild.texi (Texinfo Manuals): Don't mention gpl.texi.

2012-06-28  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/53645
        * tree-vect-generic.c (add_rshift): New function.
        (expand_vector_divmod): New function.
        (expand_vector_operation): Use it for vector integer
        TRUNC_{DIV,MOD}_EXPR by VECTOR_CST.
        * tree-vect-patterns.c (vect_recog_divmod_pattern): Replace
        unused lguup variable with dummy_int.

2012-06-28  OLivier Hainque  <hainque@adacore.com>

        * expr.c (convert_move): Latch mem integer inputs into a
        register before expanding a multi-instructions sequence.

2012-06-28  Alexandre Oliva  <aoliva@redhat.com>
            Uros Bizjak  <ubizjak@gmail.com>
            Jakub Jelinek  <jakub@redhat.com>

        PR debug/53706
        PR debug/47624
        * var-tracking.c (vt_emit_notes): Release loc_exp_dep_pool...
        (vt_finalize): ... here instead, if needed.

2012-06-28  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/53740
        PR debug/52983
        PR debug/48866
        * dce.c (word_dce_process_block): Check whether inserting debug
        temps are needed even for needed insns.
        (dce_process_block): Likewise.
        * df-problems.c (dead_debug_add): Add comment about multi-regs.
        (dead_debug_insert_temp): Likewise.  Don't subreg when we're
        setting fewer regs than a multi-reg requires.

2012-06-27  Richard Henderson  <rth@redhat.com>

        * config/alpha/alpha.c (alpha_dimode_u): New.
        (alpha_init_builtins): Initialize it, and use it.
        (alpha_fold_builtin_cmpbge): Use alpha_dimode_u.
        (alpha_fold_builtin_zapnot, alpha_fold_builtin_insxx): Likewise.
        (alpha_fold_vector_minmax, alpha_fold_builtin_perr): Likewise.
        (alpha_fold_builtin_pklb, alpha_fold_builtin_pkwb): Likewise.
        (alpha_fold_builtin_unpkbl, alpha_fold_builtin_unpkbw): Likewise.
        (alpha_fold_builtin_cttz, alpha_fold_builtin_ctlz): Likewise.
        (alpha_fold_builtin_ctpop): Likewise.
        (alpha_fold_builtin_umulh): Remove.
        (alpha_fold_builtin): Use MULT_HIGHPART_EXPR for UMULH; fix
        typo in MAX_ARGS check.

2012-06-27  Richard Henderson  <rth@redhat.com>

        * tree.def (MULT_HIGHPART_EXPR): New.
        * cfgexpand.c (expand_debug_expr): Ignore it.
        * expr.c (expand_expr_real_2): Handle it.
        * fold-const.c (int_const_binop_1): Likewise.
        * optabs.c (optab_for_tree_code): Likewise.
        * tree-cfg.c (verify_gimple_assign_binary): Likewise.
        * tree-inline.c (estimate_operator_cost): Likewise.
        * tree-pretty-print.c (dump_generic_node): Likewise.
        (op_code_prio, op_symbol_code): Likewise.
        * tree.c (commutative_tree_code): Likewise.  Also handle
        WIDEN_MULT_EXPR, VEC_WIDEN_MULT_HI_EXPR, VEC_WIDEN_MULT_LO_EXPR.

2012-06-27  Richard Henderson  <rth@redhat.com>

        PR target/53749
        * config/i386/i386.c (ix86_rtx_costs): Fix typo vs UNITS_PER_WORD
        in 2012-06-23 change.  Adjust two other DImode tests as well.

2012-06-27  Nick Clifton  <nickc@redhat.com>

        * config/rx/rx.md (comparesi3_extend): Remove = modifier from
        input operand.

2012-06-27  Richard Guenther  <rguenther@suse.de>

        PR middle-end/53676
        * tree-chrec.c (chrec_convert_1): Represent truncation to
        a type with undefined overflow as truncation to an unsigned
        type converted to the type with undefined overflow.
        * tree-scalar-evolution.c (interpret_rhs_expr): For computing
        the scalar evolution of a truncated widened operation avoid
        looking at the non-existing evolution of the widened operation
        result.

2012-06-27  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53774
        * tree-ssa-reassoc.c (get_rank): All default defs have
        precomputed rank.
        (init_reassoc): Precompute rank for all SSA default defs.

2012-06-27  Nick Clifton  <nickc@redhat.com>

        * config/rx/rx.md (simple_return): Use the simple_return rtx.

2012-06-26  Richard Henderson  <rth@redhat.com>

        * config/i386/i386.c (ix86_rtx_costs): Use standard_sse_constant_p
        and don't fall thru from standard_80387_constant_p to the memory
        fallback.

2012-06-26  Richard Henderson  <rth@redhat.com>

        * config/i386/i386.c (bdesc_args): Update.  Change
        IX86_BUILTIN_VEC_WIDEN_SMUL_ODD_V4SI to OPTION_MASK_ISA_SSE2.
        (IX86_BUILTIN_VEC_WIDEN_SMUL_EVEN_V4SI): New.
        (ix86_builtin_mul_widen_even): Use it.
        (ix86_builtin_mul_widen_odd): Relax SMUL_ODD from sse4 to sse2.
        (ix86_expand_mul_widen_evenodd): Handle signed for sse2.
        * config/i386/sse.md (vec_widen_<s>mult_hi_<V124_AVX2>): Allow
        for all SSE2.
        (vec_widen_<s>mult_lo_<V124_AVX2>): Likewise.
        (vec_widen_<s>mult_odd_<VI4_AVX2>): Likewise.  Relax from V124_AVX2.
        (vec_widen_smult_even_v4si): New.

2012-06-26  Richard Henderson  <rth@redhat.com>

        * config/i386/sse.md (mul<VI8_AVX2>3): Change from insn_and_split
        to expander; move guts to ...
        * config/i386/i386.c (ix86_expand_sse2_mulvxdi3): ... here.  Add
        highparts before shifting up.
        * config/i386/i386-protos.h: Update.

2012-06-26  Steven Bosscher  <steven@gcc.gnu.org>

        * system.h (USE_COMMON_FOR_ONE_ONLY): Poison.
        * defaults.h (USE_COMMON_FOR_ONE_ONLY): Do not provide default.
        * config/darwin.h (USE_COMMON_FOR_ONE_ONLY): Do not define.

2012-06-26  Alexandre Oliva  <aoliva@redhat.com>

        * var-tracking.c (vt_add_function_parameter): Use a preserved
        VALUE for the MEM address of an incoming parameter.

2012-06-26  Sterling Augustine <saugustine@google.com>

        * dwarf2out.c (output_pubnames): Add check for DW_TAG_enumerator.
        (prune_unused_types): Likewise.

2012-06-26  Steven Bosscher  <steven@gcc.gnu.org>

        * system.h (UNALIGNED_SHORT_ASM_OP, UNALIGNED_INT_ASM_OP,
        UNALIGNED_LONG_ASM_OP, UNALIGNED_DOUBLE_INT_ASM_OP): Poison.
        * vmsdbgout.c (UNALIGNED_SHORT_ASM_OP, UNALIGNED_INT_ASM_OP,
        UNALIGNED_LONG_ASM_OP, UNALIGNED_DOUBLE_INT_ASM_OP): Rename to
        VMS_UNALIGNED_SHORT_ASM_OP, VMS_UNALIGNED_INT_ASM_OP,
        VMS_UNALIGNED_LONG_ASM_OP, and VMS_UNALIGNED_DOUBLE_INT_ASM_OP.
        * config/microblaze/microblaze.h (UNALIGNED_SHORT_ASM_OP,
        UNALIGNED_INT_ASM_OP, UNALIGNED_DOUBLE_INT_ASM_OP): Do not define.
        * doc/tm.texi.in: Remove UNALIGNED_INT_ASM_OP reference from the
        documentation.
        * doc/tm.texi: Regenerate.
        * doc/cpp.texi: Make example for #error generic.
        * config/frv/frv.h: Fix example text to match tm.texi.

2012-06-26  Bill Schmidt  <wschmidt@linux.ibm.com>

        * tree-pass.h (pass_strength_reduction): New decl.
        * tree-ssa-loop-ivopts.c (initialize_costs): Make non-static.
        (finalize_costs): Likewise.
        * timevar.def (TV_TREE_SLSR): New timevar.
        * gimple-ssa-strength-reduction.c: New.
        * tree-flow.h (initialize_costs): New decl.
        (finalize_costs): Likewise.
        * Makefile.in (tree-ssa-strength-reduction.o): New dependencies.
        * passes.c (init_optimization_passes): Add pass_strength_reduction.

2012-06-26  Matt Turner  <mattst88@gmail.com>

        * doc/extend.texi (__builtin_arm_tinsrb): Add missing second parameter.
        (__builtin_arm_tinsrh): Likewise.
        (__builtin_arm_tinsrw): Likewise.
        (__builtin_arm_wsadb): Add missing v2si parameter.
        (__builtin_arm_wsadh): Likewise.
        (__builtin_arm_getwcx): Delete.
        (__builtin_arm_setwcx): Delete.
        (__builtin_arm_getwcgr0): Add.
        (__builtin_arm_getwcgr1): Add.
        (__builtin_arm_getwcgr2): Add.
        (__builtin_arm_getwcgr3): Add.
        (__builtin_arm_setwcgr0): Add.
        (__builtin_arm_setwcgr1): Add.
        (__builtin_arm_setwcgr2): Add.
        (__builtin_arm_setwcgr3): Add.

2012-06-26  Richard Guenther  <rguenther@suse.de>

        Revert
        2012-06-21  Richard Guenther  <rguenther@suse.de>

        * tree-inline.c (estimate_num_insns): Estimate call cost for
        tailcalls properly.

2012-06-26  Steven Bosscher  <steven@gcc.gnu.org>

        PR other/33190
        * doc/tm.texi.in: Document LOGICAL_OP_NON_SHORT_CIRCUIT.
        * doc/tm.texi: Regenerate.

2012-06-26  Steven Bosscher  <steven@gcc.gnu.org>

        PR other/33190
        * config/mips/mips.h: Do not define ALL_COP_ADDITIONAL_REGISTER_NAMES.
        * config/frv/frv.h: Do not define REVERSE_CONDEXEC_PREDICATES_P.
        * doc/tm.texi.in: Remove documentation for unused target macros
        ALL_COP_ADDITIONAL_REGISTER_NAMES, DBX_OUTPUT_LBRAC, DBX_OUTPUT_NFUN,
        DBX_OUTPUT_RBRAC, RANGE_TEST_NON_SHORT_CIRCUIT, REAL_VALUE_TRUNCATE,
        REVERSE_CONDEXEC_PREDICATES_P, TARGET_ALIGN_ANON_BITFIELDS, and
        TARGET_NARROW_VOLATILE_BITFIELDS.
        Document that MD_HANDLE_UNWABI is a macro in libgcc.
        * doc/tm.texi: Regenerate.
        * system.h: Poison target macros
        ALL_COP_ADDITIONAL_REGISTER_NAMES, DBX_OUTPUT_LBRAC, DBX_OUTPUT_NFUN,
        DBX_OUTPUT_RBRAC, RANGE_TEST_NON_SHORT_CIRCUIT, REAL_VALUE_TRUNCATE,
        REVERSE_CONDEXEC_PREDICATES_P, TARGET_ALIGN_ANON_BITFIELDS, and
        TARGET_NARROW_VOLATILE_BITFIELDS

2012-06-26  Jan Hubicka  <jh@suse.cz>

        PR lto/53572
        * cgraph.h (varpool_can_remove_if_no_refs): Fix handling of
        used symbols.

2012-06-26  Dehao Chen  <dehao@google.com>

        * tree-inline.c: (expand_call_inline): Ensure that lexical block's
        source location is consistant with the call stmt.

2012-06-26  Ulrich Weigand  <ulrich.weigand@linaro.org>

        PR tree-optimization/53729
        PR tree-optimization/53636
        * tree-vect-slp.c (vect_slp_analyze_bb_1): Delay call to
        vect_verify_datarefs_alignment until after statements have
        been marked as relevant/irrelevant.
        * tree-vect-data-refs.c (vect_verify_datarefs_alignment):
        Skip irrelevant statements.
        (vect_enhance_data_refs_alignment): Use STMT_VINFO_RELEVANT_P
        instead of STMT_VINFO_RELEVANT.
        (vect_get_data_access_cost): Do not check for supportable
        alignment before calling vect_get_load_cost/vect_get_store_cost.
        * tree-vect-stmts.c (vect_get_store_cost): Do not abort when
        handling unsupported alignment.
        (vect_get_load_cost): Likewise.

2012-06-25  Steven Bosscher  <steven@gcc.gnu.org>

        * config/rl78/rl78.h: Do not undefine DONT_USE_BUILTIN_SETJMP.
        Do not define JMP_BUF_SIZE.

2012-06-26  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/53748
        * tree-ssa-phiopt.c (conditional_replacement): Only optimize
        if arg0/arg1 have integral or pointer types.

2012-06-25  Richard Henderson  <rth@redhat.com>

        * config/i386/sse.md (sse2_sse4_1): Remove code attr.
        (<s>dot_prodv4si, <s>dot_prodv8si): Remove
        (sdot_prodv4si): New; handle only XOP.

2012-06-25  Richard Henderson  <rth@redhat.com>

        * config/i386/i386-builtin-types.def (V4UDI, V8USI): New.
        (V2UDI_FUNC_V4USI_V4USI): New.
        (V4UDI_FUNC_V8USI_V8USI): New.
        * config/i386/i386.c (ix86_expand_args_builtin): Handle them.
        (IX86_BUILTIN_VEC_WIDEN_SMUL_ODD_V4SI): New.
        (IX86_BUILTIN_VEC_WIDEN_SMUL_ODD_V8SI): New.
        (IX86_BUILTIN_VEC_WIDEN_UMUL_ODD_V4SI): New.
        (IX86_BUILTIN_VEC_WIDEN_UMUL_ODD_V8SI): New.
        (IX86_BUILTIN_VEC_WIDEN_UMUL_EVEN_V4SI): New.
        (IX86_BUILTIN_VEC_WIDEN_UMUL_EVEN_V8SI): New.
        (bdesc_args): Add them.
        (ix86_builtin_mul_widen_even, ix86_builtin_mul_widen_odd): New.
        (TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_EVEN): New.
        (TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_ODD): New.
        (ix86_expand_mul_widen_evenodd): Use xop_pmacsdqh.
        * config/i386/sse.md (vec_widen_<s>mult_odd_<V124_AVX2>): New.

2012-06-25  Richard Henderson  <rth@redhat.com>

        * config/i386.sse.md (mul<VI4_AVX2>3): Use xop_pmacsdd.

2012-06-25  Richard Henderson  <rth@redhat.com>

        * config/i386/i386.c (ix86_rtx_costs) [MULT]: Only apply XOP cost
        to V16QImode.
        (ix86_expand_vec_interleave): New.
        (ix86_expand_mul_widen_evenodd): New.
        (ix86_expand_mul_widen_hilo): New.
        (ix86_expand_sse2_mulv4si3): Use ix86_expand_mul_widen_evenodd.
        * config/i386/i386.md (u_bool) New code attr.
        * config/i386/predicates.md
        (nonimmediate_or_const_vector_operand): Remove.
        * config/i386/sse.md (mul<VI4_AVX2>3): Don't use it; don't test
        both AVX and SSE4_1.
        (vec_widen<s>mult_hi_<VI2_AVX2>): Remove.
        (vec_widen<s>mult_lo_<VI2_AVX2>): Remove.
        (vec_widen<s>mult_hi_v8si): Remove.
        (vec_widen<s>mult_lo_v8si): Remove.
        (vec_widen_smult_hi_v4si): Remove.
        (vec_widen_smult_lo_v4si): Remove.
        (vec_widen_umult_hi_v4si): Remove.
        (vec_widen_umult_lo_v4si): Remove.
        (vec_widen_<s>mult_hi_<VI124_AVX2>): New.
        (vec_widen_<s>mult_lo_<VI124_AVX2>): New.
        * config/i386/i386-protos.h: Update.

2012-06-25  Christophe Lyon  <christophe.lyon@st.com>

        * config/arm/neon.md (UNSPEC_VLD1_DUP): Remove.
        (neon_vld1_dup): Restrict to VQ operands.
        (neon_vld1_dupv2di): New, fixes vld1q_dup_s64.

2012-06-25  Matthew Gretton-Dann  <matthew.gretton-dann@arm.com>
            James Greenhalgh  <james.greenhalgh@arm.com>

        * config/arm/arm.h (TARGET_CPU_CPP_BUILTINS): Add new built-ins.
        (TARGET_FMA): New macro.
        (TARGET_ARM_QBIT, TARGET_ARM_SAT): Likewise.
        (TARGET_ARM_ARCH): Likewise.
        (TARGET_ARM_ARCH_ISA_THUMB): Likewise.
        (TARGET_V6M, TARGET_V7M): Likewise.
        (TARGET_ARM_ARCH_PROFILE): Likewise.
        (TARGET_ARM_FEATURE_LDREX): Likewise.
        (TARGET_ARM_FP, TARGET_NEON_FP): Likewise.
        (ARM_MIN_ENUM_SIZE): Likewise.
        * config/arm/arm.c (arm_file_start): Refactor appropriately.
        (base_architecture): New enumeration.
        (arm_base_arch): New global variable.
        (processors): Add field base_arch.
        (ARM_ARCH, ARM_CORE): Adjust accordingly.
        (arm_option_override): Add initialization of arm_base_arch.
        * doc/cpp.texi (system-specific predefined macros.): Change.

2012-06-25  Jakub Jelinek  <jakub@redhat.com>

        PR target/53759
        * config/i386/sse.md (sse_loadlps): Use x m x constraints instead
        of x x x in the vmovlps load alternative.

2012-06-25  Richard Sandiford  <rdsandiford@googlemail.com>

        PR debug/53740
        * df.h (dead_debug_add): Remove third argument.
        * df-problems.c (dead_debug_add): Likewise.  Use the REGNO of the
        REG that we want to replace instead.
        (dead_debug_insert_temp): Use the REGNO of the reg that we want
        to replace instead of DF_REF_REGNO.  Require there to always be
        at least one such use.  Check for cases where the same location
        has more than df_ref associated with it.
        (df_note_bb_compute): Remove third dead_debug_add argument.
        * dce.c (word_dce_process_block): Likewise.

2012-06-25  Steven Bosscher  <steven@gcc.gnu.org>

        * config/v850/v850.c: Remove redundant extern declarations for
        last_assemble_variable_decl and size_directive_output.

        * doc/tm.texi.in: Document JMP_BUF_SIZE.
        * doc/tm.texi: Regenerate.
        * config/sparc/sparc.h (JMP_BUF_SIZE): Do not define.
        * config/pa/pa.h (JMP_BUF_SIZE): Likewise.
        * config/stormy16/stormy16.h: Likewise.

        * config/picochip/picochip.c: Do not define DONT_USE_BUILTIN_SETJMP.

        * doc/sourcebuild.texi: Add missing subdirectories.

2012-06-25  Tristan Gingold  <gingold@adacore.com>

        * config/i386/i386.h: Fix typo.

2012-06-25  Tristan Gingold  <gingold@adacore.com>

        * config/i386/winnt.c (i386_pe_seh_end_prologue): Move code to ...
        (seh_cfa_adjust_cfa): ... that function.
        (seh_emit_stackalloc): Do not emit out of range values.
        * config/i386/i386.md: Delete unused UNSPEC_REG_SAVE,
        UNSPEC_DEF_CFA constants.
        * config/i386/i386.h (SEH_MAX_FRAME_SIZE): Define.
        * config/i386/i386.c (ix86_frame_pointer_required): Required
        for very large frames on SEH target.
        (ix86_compute_frame_layout): Save area is before frame pointer
        on SEH target.  Handle very large frames.
        (ix86_expand_prologue): Likewise.

2012-06-24  Steven Bosscher  <steven@gcc.gnu.org>

        * output.h: (current_function_is_leaf,
        current_function_sp_is_unchanging,
        current_function_uses_only_leaf_regs): Remove.
        * function.c (current_function_is_leaf,
        current_function_sp_is_unchanging,
        current_function_uses_only_leaf_regs): Remove.
        (rest_of_handle_check_leaf_regs): Set crtl->uses_only_leaf_regs
        instead of current_function_uses_only_leaf_regs.
        * function.h (struct rtl_data): New fields sp_is_unchanging,
        is_leaf, uses_only_leaf_regs.
        * resource.c (init_resource_info): Replace current_function_is_leaf,
        current_function_sp_is_unchanging, and
        current_function_uses_only_leaf_regs with new crtl fields.
        * sdbout.c (sdbout_symbol): Likewise.
        * df-core.c (rest_of_handle_df_initialize): Likewise.
        * ira.c (ira): Likewise.
        * final.c (final_start_function): Likewise.
        * reorg.c (fill_simple_delay_slots): Likewise.
        * regrename.c (check_new_reg_p): Likewise.
        * stack-ptr-mod.c (notice_stack_pointer_modification_1): Likewise.
        (notice_stack_pointer_modification): Likewise.
        * dbxout.c (dbxout_symbol): Likewise.
        (dbxout_parms): Likewise.
        * sel-sched.c (init_regs_for_mode): Likewise.
        * dwarf2out.c (dbx_reg_number): Likewise.
        (multiple_reg_loc_descriptor): Likewise.
        * config/i386/i386.c (ix86_frame_pointer_required): Likewise.
        (gen_pop): Likewise.
        (ix86_select_alt_pic_regnum): Likewise.
        (ix86_compute_frame_layout): Likewise.
        (ix86_finalize_stack_realign_flags): Likewise.
        (ix86_expand_epilogue): Likewise.
        * config/rs6000/rs6000.c (rs6000_stack_info): Likewise.
        * config/h8300/h8300.c (byte_reg): Likewise.
        * config/c6x/c6x.c (must_reload_pic_reg_p): Likewise.
        (c6x_save_reg): Likewise.
        (c6x_compute_frame_layout): Likewise.
        * config/pa/pa.c (pa_compute_frame_size): Likewise.
        (pa_output_function_prologue): Likewise.
        * config/stormy16/stormy16.c (struct xstormy16_stack_layout): Likewise.
        * config/sparc/sparc.md (attr "leaf_function"): Likewise.
        * config/sparc/sparc.c (sparc_initial_elimination_offset): Likewise.
        (sparc_expand_prologue): Likewise.
        (sparc_flat_expand_prologue): Likewise.
        (sparc_asm_function_prologue): Likewise.
        (sparc_output_mi_thunk): Likewise.
        (sparc_frame_pointer_required): Likewise.
        * config/epiphany/epiphany.c (epiphany_compute_function_type):
        Likewise.
        (epiphany_compute_frame_size): Likewise.
        * config/lm32/lm32.c (lm32_compute_frame_size): Likewise.
        * config/cris/cris.c (cris_md_asm_clobbers): Likewise.
        (cris_frame_pointer_required): Likewise.
        * config/tilepro/tilepro.c (emit_sp_adjust): Likewise.
        (tilepro_current_function_is_leaf): Likewise.
        * config/arm/arm.c (arm_compute_save_reg0_reg12_mask): Likewise.
        * config/pdp11/pdp11.c (pdp11_expand_epilogue): Likewise.
        * config/ia64/ia64.c (find_gr_spill): Likewise.
        (ia64_compute_frame_size): Likewise.
        (ia64_can_eliminate): Likewise.
        (ia64_initial_elimination_offset): Likewise.
        * config/m68k/m68k.c (m68k_save_reg): Likewise.
        (m68k_expand_epilogue): Likewise.
        * config/rx/rx.c (rx_get_stack_layout): Likewise.
        * config/tilegx/tilegx.c (tilegx_current_function_is_leaf): Likewise.
        * config/picochip/picochip.c (picochip_can_eliminate_link_sp_save):
        Likewise.
        (picochip_output_frame_debug): Likewise.
        * config/sh/sh.c (sh_media_register_for_return): Likewise.
        (sh_allocate_initial_value): Likewise.
        (sh_output_mi_thunk): Likewise.
        * config/microblaze/microblaze.c (microblaze_must_save_register):
        Likewise.
        (compute_frame_size): Likewise.
        (microblaze_initial_elimination_offset): Likewise.
        (microblaze_expand_prologue): Likewise.
        (microblaze_expand_epilogue): Likewise.
        * config/frv/frv.c (frv_expand_epilogue): Likewise.
        (frv_frame_pointer_required): Likewise.
        * config/spu/spu.c (get_pic_reg): Likewise.
        (direct_return): Likewise.
        (spu_expand_prologue): Likewise.
        (spu_expand_epilogue): Likewise.
        (spu_initial_elimination_offset): Likewise.
        * config/mips/mips.c (mips_global_pointer): Likewise.
        (mips_cfun_might_clobber_call_saved_reg_p): Likewise.
        (mips_compute_frame_info): Likewise.
        * config/mep/mep.c (mep_interrupt_saved_reg): Likewise.
        (mep_reload_pointer): Likewise.
        * config/rl78/rl78.c (need_to_save): Likewise.
        * config/cr16/cr16.c (cr16_compute_save_regs): Likewise.
        * config/score/score.c (score_compute_frame_size): Likewise.
        (score_function_prologue): Likewise.
        * config/bfin/bfin.c (must_save_p): Likewise.
        (expand_prologue_reg_save): Likewise.
        (expand_epilogue_reg_restore): Likewise.
        (bfin_frame_pointer_required): Likewise.
        (n_regs_saved_by_prologue): Likewise.
        (add_to_reg): Likewise.
        (expand_interrupt_handler_prologue): Likewise.
        (expand_interrupt_handler_epilogue): Likewise.
        (bfin_expand_prologue): Likewise.
        * config/avr/avr.c (avr_regs_to_save): Likewise.
        (avr_prologue_setup_frame): Likewise.
        (expand_epilogue): Likewise.
        * config/s390/s390.c (s390_regs_ever_clobbered): Likewise.
        (s390_register_info): Likewise.
        (s390_frame_info): Likewise.
        (s390_init_frame_layout): Likewise.
        (s390_emit_prologue): Likewise.


2012-06-24  Steven Bosscher  <steven@gcc.gnu.org>

        * system.h: Poison ASM_BYTE_OP and ASM_OUTPUT_BYTE.
        * vmsdbgout: Do not undefine it if defined.
        Rename local ASM_BYTE_OP definition to VMS_ASM_BYTE_OP.
        * config/microblaze/microblaze/h: Do no define ASM_BYTE_OP.
        * config/mep/mep.h: Do not define ASM_OUTPUT_BYTE.

2012-06-24  Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/mips.c (mips_process_sync_loop): Add missing enum cast.

2012-06-23  Richard Henderson  <rth@redhat.com>

        PR target/53749
        * config/i386/i386.c (ix86_rtx_costs): Add reasonable costs for
        V*QImode shifts and multiply.
        (ix86_expand_vecop_qihi): Support shifts.
        * config/i386/i386.md (any_shift): New code iterator.
        * config/i386/sse.md (ashlv16qi3): Merge ...
        (<any_shiftrt>v16qi3): ... into ...
        (<any_shift><VI1_AVX2>3): ... here.  Use ix86_expand_vecop_qihi
        to support SSE and AVX.

        * config/i386/i386.c (ix86_expand_sse_unpack): Split operands[]
        parameter into src and dest.
        * config/i386/sse.md (vec_unpacku_hi_<V124_AVX2>): Update call.
        (vec_unpacks_hi_<V124_AVX2>): Likewise.
        (vec_unpacku_lo_<V124_AVX2>): Likewise.
        (vec_unpacks_lo_<V124_AVX2>): Likewise.
        * config/i386/i386-protos.h: Update.

        * config/i386/sse.md (mul<VI1_AVX2>3): Change from insn_and_split to
        pure expander; move expansion code ...
        * config/i386/i386.c (ix86_expand_vecop_qihi): ... here.  New function.
        * config/i386/i386-protos.h: Update.

2012-06-22  Edmar Wienskoski  <edmar@freescale.com>

        * config/rs6000/rs6000.md (define_attr "type"): New type popcnt.
        (popcntb<mode>2): Add attribute type popcnt.
        (popcntd<mode>2): Ditto.
        * config/rs6000/power4.md (define_insn_reservation): Add type popcnt.
        * config/rs6000/power5.md (define_insn_reservation): Ditto.
        * config/rs6000/power7.md (define_insn_reservation): Ditto.
        * config/rs6000/476.md (define_insn_reservation): Ditto.
        * config/rs6000/power6.md (define_insn_reservation): New
        reservation for popcnt instructions.

2012-06-22  H.J. Lu  <hongjiu.lu@intel.com>

        * doc/invoke.texi: Update -mpreferred-stack-boundary=3 warning.

2012-06-22  H.J. Lu  <hongjiu.lu@intel.com>

        PR target/53383
        * doc/invoke.texi: Add a warning for -mpreferred-stack-boundary=3.

        * config/i386/i386.c (ix86_option_override_internal): Allow
        -mpreferred-stack-boundary=3 for 64-bit if SSE is disabled.

        * config/i386/i386.h (MIN_STACK_BOUNDARY): Set to 64 for 64-bit
        if SSE is disabled.

2012-06-22  Bill Schmidt  <wschmidt@linux.ibm.com>

        * double-int.c (double_int_multiple_of): New function.
        * double-int.h (double_int_multiple_of): New decl.
        * tree-ssa-loop-ivopts.c (add_cost, zero_cost): Remove undefs.
        (mbc_entry_hash): New forward decl.
        (mbc_entry_eq): Likewise.
        (zero_cost): Change to no_cost.
        (mult_costs): New static var.
        (cost_tables_exist): Likewise.
        (initialize_costs): New function.
        (finalize_costs): Likewise.
        (tree_ssa_iv_optimize_init): Call initialize_costs.
        (add_cost): Change to add_regs_cost; distinguish costs by speed.
        (multiply_regs_cost): New function.
        (add_const_cost): Likewise.
        (extend_or_trunc_reg_cost): Likewise.
        (negate_reg_cost): Likewise.
        (multiply_by_cost): Change to multiply_by_const_cost; distinguish
        costs by speed.
        (get_address_cost): Change add_cost to add_regs_cost; change
        multiply_by_cost to multiply_by_const_cost.
        (force_expr_to_var_cost): Change zero_cost to no_cost; change
        add_cost to add_regs_cost; change multiply_by_cost to
        multiply_by_const_cost.
        (split_cost): Change zero_cost to no_cost.
        (ptr_difference_cost): Likewise.
        (difference_cost): Change zero_cost to no_cost; change multiply_by_cost
        to multiply_by_const_cost.
        (get_computation_cost_at): Change add_cost to add_regs_cost; change
        multiply_by_cost to multiply_by_const_cost.
        (determine_use_iv_cost_generic): Change zero_cost to no_cost.
        (determine_iv_cost): Change add_cost to add_regs_cost.
        (iv_ca_new): Change zero_cost to no_cost.
        (tree_ssa_iv_optimize_finalize): Call finalize_costs.
        * tree-ssa-address.c (most_expensive_mult_to_index): Change
        multiply_by_cost to multiply_by_const_cost.
        * tree-flow.h (multiply_by_cost): Change to multiply_by_const_cost.
        (add_regs_cost): New decl.
        (multiply_regs_cost): Likewise.
        (add_const_cost): Likewise.
        (extend_or_trunc_reg_cost): Likewise.
        (negate_reg_cost): Likewise.

2012-06-22  Richard Guenther  <rguenther@suse.de>

        Merge from graphite branch
        2011-08-10  Sebastian Pop <sebpop@gmail.com>

        * graphite-sese-to-poly.c (build_scop_drs): Fix memory leak.

        2012-01-13  Tobias Grosser  <tobias@grosser.es>

        * tree-flow.h (parallelized_function_p): Declare.
        * tree-parloops.c (parallelized_function_p): Export.
        * graphite.c (graphite_transform_loops): Do not run graphite on
        already parallel functions.

2012-06-22  Alan Modra  <amodra@gmail.com>

        * config/rs6000/rs6000.c (rs6000_pre_atomic_barrier): Pass in and
        return mem.  Convert to indirect addressing if not indirect or
        indexed.  Adjust all callers.

2012-06-22  Richard Guenther  <rguenther@suse.de>

        * gcov-iov.c: Include bconfig.h and system.h.

2012-06-22  Andreas Schwab  <schwab@linux-m68k.org>

        * doc/include/texinfo.tex: Update to version 2012-06-05.14.

2012-06-22  Richard Guenther  <rguenther@suse.de>

        PR gcov-profile/53744
        * gcov-iov.c (main): Treat "" and "prerelease" the same.

2012-06-22  Eric Botcazou  <ebotcazou@adacore.com>

        PR debug/53704
        * dwarf2out.c (gen_compile_unit_die): Use DW_LANG_Fortran90 as language
        for GNU Fortran if in strict DWARF2 mode.

2012-06-22  Eric Botcazou  <ebotcazou@adacore.com>

        * tree-ssa-live.c (remove_unused_scope_block_p): Remove again
        DECL_IGNORED_P non-reg vars even if they are used.

2012-06-21  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/53671
        PR debug/49888
        * var-tracking.c (vt_get_canonicalize_base): New.
        (vt_canonicalize_addr, vt_stack_offset_p): New.
        (vt_canon_true_dep): New.
        (drop_overlapping_mem_locs): Use vt_canon_true_dep.
        (clobber_overlaping_mems): Use vt_canonicalize_addr.

2012-06-21  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/53671
        PR debug/49888
        * var-tracking.c (vt_initialize): Record initial offset between
        arg pointer and stack pointer.

2012-06-21  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/53671
        PR debug/49888
        * var-tracking.c (vt_init_cfa_base): Drop redundant recording of
        CFA base.

2012-06-21  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/53671
        PR debug/49888
        * alias.c (memrefs_conflict_p): Improve handling of AND for alignment.

2012-06-21  Alexandre Oliva  <aoliva@redhat.com>

        * ddg.c (build_intra_loop_deps): Discard deps of nondebug on debug.

2012-06-21  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/53682
        * cselib.c (promote_debug_loc): Don't crash on NULL argument.

2012-06-21  Meador Inge  <meadori@codesourcery.com>

        PR c/53702
        * c-decl.c (c_push_function_context): Restore the behavior to reuse
        the language function allocated for -Wunused-local-typedefs.
        (c_pop_function_context): If necessary, clear the language function
        created in c_push_function_context.  Always clear out the
        x_cur_stmt_list field of the restored language function.

2012-06-21  Sterling Augustine  <saugustine@google.com>
            Cary Coutant  <ccoutant@google.com>

        * dwarf2out.c (is_cu_die, is_namespace_die, is_class_die,
        add_AT_pubnames, add_enumerator_pubname, want_pubnames): New functions.
        (comdat_type_struct): New field 'skeleton_die'.
        (breakout_comdat_types): Update it.
        (add_pubname): Rework logic.  Call is_class_die, is_cu_die and
        is_namespace_die.  Fix minor style violation.  Call want_pubnames.
        (add_pubname_string): Call want_pubnames.
        (add_pubtype): Rework logic for calculating type name.  Call
        is_namespace_die.  Call want_pubnames.
        (output_pubnames): Move conditional logic deciding when to produce the
        section from dwarf2out_finish.  Use new skeleton_die field.
        (base_type_die): Call add_pubtype.
        (gen_enumeration_type_die): Unconditionally call add_pubtype.
        (gen_subprogram_die): Adjust calls to add_pubname.
        (gen_namespace_die): Call add_pubname_string.
        (dwarf2out_finish): Call add_AT_pubnames; Move logic on when to
        produce pubnames and pubtypes sections to output_pubnames.
        * common.opt (-gpubnames): New option.
        * doc/invoke.texi: Document it.

2012-06-21  Steven Bosscher  <steven@gcc.gnu.org>

        * config/m32c/m32c-pragma.c: Remove unnecessary includes.

2012-06-21  Michael Matz  <matz@suse.de>

        PR middle-end/53688
        * builtins.c (get_memory_rtx): Always build an all-aliasing MEM_REF
        with correct size.

2012-06-21  Richard Guenther  <rguenther@suse.de>

        * tree-inline.c (estimate_num_insns): Estimate call cost for
        tailcalls properly.

2012-06-20  Rüdiger Sonderfeld  <ruediger@c-plusplus.de>

        * tree.h (DECL_SOURCE_COLUMN): New accessor.

2012-06-20  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (SINCOS): New int iterator.
        (sincos): New int attribute.
        (*<sincos>xf2_i387): Macroize insn from *{sin,cos}xf2_i387 using
        SINCOS int iterator.
        (*<sincos>_extend<mode>xf2_i387): Macroize insn from
        *{sin,cos}_extend<mode>xf2_i387 using SINCOS int iterator.

2012-06-20  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (RDFSGSBASE): New int iterator.
        (WRFSGSBASE): Ditto.
        (fsgs): New int attribute.
        (rd<fsgs>base<mode>): Macroize insn from rd<fsgs>base<mode> using
        RDFSGSBASE int iterator.
        (wr<fsgs>base<mode>): Macroize insn from wr<fsgs>base<mode> using
        WRFSGSBASE int iterator.

2012-06-20  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (<rounding_insn><mode>2): Macroize expander
        from {floor,ceil,btrunc}<mode>2 using FIST_ROUNDING int iterator.
        (l<rounding_insn><MODEF:mode><SWI48:mode>2): Macroize expander
        from l{floor,ceil}<MODEF:mode><SWI48:mode>2 using FIST_ROUNDING
        int iterator.

2012-06-20  Steven Bosscher  <steven@gcc.gnu.org>

        * system.h: Poison ASM_OUTPUT_IDENT and IDENT_ASM_OP.

2012-06-20  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/30318
        * tree-vrp.c (range_int_cst_p): Do not reject overflowed
        constants here.
        (range_int_cst_singleton_p): But explicitely here.
        (zero_nonzero_bits_from_vr): And here.
        (extract_range_from_binary_expr_1): Re-implement PLUS_EXPR
        to cover all cases we can perform arbitrary precision
        arithmetic with double-ints.
        (intersect_ranges): Handle adjacent anti-ranges.

2012-06-20  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (rounding_insn): New int attribute.
        (<rounding_insn>xf2): Macroize insn from
        {floor,ceil,btrunc}xf2 using FRNDINT_ROUNDING int iterator.
        (l<rounding_insn>xf<mode>2): Rename from l<rounding>xf<mode>2.

2012-06-20  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (IEEE_MAXMIN): New int iterator.
        (ieee_maxmin): New int attribute.
        (*ieee_s<ieee_maxmin><mode>3): Macroize insn from
        *ieee_s{max,min}<mode>3 using IEEE_MAXMIN int iterator.

2012-06-20  Steven Bosscher  <steven@gcc.gnu.org>

        * config/arm/arm.h (EMIT_EABI_ATTRIBUTE): Remove.
        * config/arm/arm.c: Do not include c-pragma.h.
        (arm_emit_eabi_attribute): New function based on EMIT_EABI_ATTRIBUTE.
        (arm_file_start): Replace uses of EMIT_EABI_ATTRIBUTE with calls
        to arm_emit_eabi_attribute.
        * arm-c.c: Do not include output.h.
        (arm_output_c_attributes): Replace use of EMIT_EABI_ATTRIBUTE with a
        call to arm_emit_eabi_attribute.
        * config/arm/arm-protos.h (arm_emit_eabi_attribute): Prototype it.

2012-06-20  Richard Guenther  <rguenther@suse.de>

        * tree-vect-data-refs.c (vect_can_force_dr_alignment_p):
        Allow adjusting alignment of user-aligned decls again.

2012-06-20  Steven Bosscher  <steven@gcc.gnu.org>

        * config/rl78/rl78-c.c: Remove unnecessary includes.

2012-06-20  Steven Bosscher  <steven@gcc.gnu.org>

        * config/cris/cris.c: Include cgraph.h.
        (cris_option_override): Do not set non-existing flag_no_gcc_ident.

2012-06-19  Maxim Kuvyrkov  <maxim@codesourcery.com>

        * emit-rtl.c (need_atomic_barrier_p): New function.
        * emit-rtl.h (need_atomic_barrier_p): Declare it.
        * config/alpha/alpha.c (alpha_{pre,post}_atomic_barrier): Use it.
        * config/arm/arm.c (arm_{pre,post}_atomic_barrier): Use it.
        * config/tilegx/tilegx.c (tile_{pre,post}_atomic_barrier): Use it.
        * config/mips/mips.c (mips_{pre,post}_atomic_barrier_p): Remove.
        (mips_process_sync_loop): Use generic version instead.

2012-06-19  Maxim Kuvyrkov  <maxim@codesourcery.com>

        * config/mips/mips.c (mips_process_sync_loop): Emit cmp result only if
        it is used.

2012-06-19  Tom de Vries  <vries@codesourcery.com>
            Maxim Kuvyrkov  <maxim@codesourcery.com>

        * config/mips/constraints.md (ZR): New constraint.
        * config/mips/predicates.md (mem_noofs_operand): New predicate.
        * config/mips/mips.c (mips_print_operand): Handle new print modifier.
        * config/mips/mips.h (TARGET_XLP): Define.
        (TARGET_SYNC_AFTER_SC): Update.
        (ISA_HAS_SWAP, ISA_HAS_LDADD): Define.
        * config/mips/sync.md (atomic_exchange, atomic_fetch_add): Use
        XLP-specific swap and ldadd patterns.
        (atomic_exchange_swap, atomic_fetch_add_ldadd): New patterns.

2012-06-19  Tom de Vries  <vries@codesourcery.com>
            Maxim Kuvyrkov  <maxim@codesourcery.com>

        * config/mips/mips.c (mips_emit_pre_atomic_barrier_p,)
        (mips_emit_post_atomic_barrier_p): New static functions.
        (mips_process_sync_loop): Use them.  Emit sync memory barriers in
        accordance with memory model semantics.  Add return of CMP result for
        compare_and_swap.
        * config/mips/mips.md: Update comment.
        (sync_cmp): New attribute.
        (sync_memmodel): New attribute replacing sync_release_barrier.
        * config/mips/sync.md (UNSPEC_ATOMIC_COMPARE_AND_SWAP,)
        (UNSPEC_ATOMIC_EXCHANGE, UNSPEC_ATOMIC_FETCH_OP): New constants.
        (sync_lock_test_and_set, test_and_set_12): Update.
        (atomic_compare_and_swap, atomic_exchange, atomic_exchange_llsc,)
        (atomic_fetch_add, atomic_fetch_add_llsc): New patterns.

2012-06-19  Joseph Myers  <joseph@codesourcery.com>

        * config/rs6000/spe.md (*mov_si<mode>_e500_subreg0): Rename to
        mov_si<mode>_e500_subreg0.
        (*mov_si<mode>_e500_subreg0_elf_low)
        (*mov_si<mode>_e500_subreg4_elf_low): New patterns.

2012-06-19  Richard Henderson  <rth@redhat.com>

        * config/alpha/alpha.c: Include params.h.
        (alpha_option_override): Initialize PARAM_L1_CACHE_LINE_SIZE,
        PARAM_L1_CACHE_SIZE, PARAM_L2_CACHE_SIZE for the cpu tuning.

2012-06-19  Steven Bosscher  <steven@gcc.gnu.org>

        * doc/tm.texi.in (TARGET_OBJC_DECLARE_UNRESOLVED_CLASS_REFERENCE,
        TARGET_OBJC_DECLARE_CLASS_DEFINITION): Add @hooks.
        (ASM_DECLARE_CLASS_REFERENCE, ASM_DECLARE_UNRESOLVED_REFERENCE):
        Remove.
        * doc/tm.texi: Regenerate.
        * config/darwin.h (ASM_OUTPUT_LABELREF): Remove special case for
        .objc_class_name_*.
        * config/darwin-c.c: Include target.h.
        (darwin_objc_declare_unresolved_class_reference): New function.
        (darwin_objc_declare_class_definition): New function.
        (TARGET_OBJC_DECLARE_UNRESOLVED_CLASS_REFERENCE): Define.
        (TARGET_OBJC_DECLARE_CLASS_DEFINITION): Define.

2012-06-19  Steven Bosscher  <steven@gcc.gnu.org>

        * target.def (output_ident): New hook.
        * targhooks.h (default_asm_output_ident_directive): Add prototype.
        * varasm.c (assemble_asm): Only prefix a tab if the string does not
        already start with one.
        (default_asm_output_ident_directive): New function to emit
        .ident as a top-level asm node while parsing, or directly to
        asm_out_file after parsing.
        * toplev.c (compile_file): Print a GCC .ident with
        targetm.asm_out.output_ident.
        * doc/tm.texi.in (ASM_OUTPUT_IDENT): Remove documentation for macro.
        (TARGET_ASM_OUTPUT_IDENT): Add @hook for this.
        * doc/tm.texi: Update.

        * config/elfos.h (ASM_OUTPUT_IDENT, IDENT_ASM_OP): Remove.
        (TARGET_ASM_OUTPUT_IDENT): Define.
        * config/i386/djgpp.h (IDENT_ASM_OP): Remove.
        * config/i386/gas.h (ASM_OUTPUT_IDENT): Remove.
        * config/arm/aout.h (ASM_OUTPUT_IDENT): Remove.
        * config/sparc/sparc.h (IDENT_ASM_OP): Remove.
        (TARGET_ASM_OUTPUT_IDENT): Define.
        * config/picochip/picochip.h (IDENT_ASM_OP): Remove.
        (TARGET_ASM_OUTPUT_IDENT): Define.

        * config/cris/cris-protos.h (cris_asm_output_ident): Add prototype.
        * config/cris/cris.c (cris_asm_output_ident): New function.
        * config/cris/cris.h (ASM_OUTPUT_IDENT, IDENT_ASM_OP): Remove.

        * config/microblaze/microblaze-protos.h (microblaze_asm_output_ident):
        Add prototype.
        * config/microblaze/microblaze.c: Include cgraph.h for add_asm_node.
        (microblaze_asm_output_ident): Rewrite to work similar to
        default_asm_output_ident_directive for front-end .idents.
        * config/microblaze/microblaze.h (ASM_OUTPUT_IDENT): Remove.
        (TARGET_ASM_OUTPUT_IDENT): Define.

        * config/mips/mips.h (ASM_OUTPUT_IDENT): Remove.
        * config/mips/sde.h (IDENT_ASM_OP, ASM_OUTPUT_IDENT): Remove.

        * config/rx/rx.c: Include cgraph.h for add_asm_node.
        (rx_asm_output_ident): New function, similar to
        default_asm_output_ident_directive, but handle AS100 syntax also, so
        that #ident also works for rx in AS100 syntax.
        (TARGET_ASM_OUTPUT_IDENT): Define.
        * config/rx/rx.h (IDENT_ASM_OP): Remove.

        * Makefile.in: Fix dependencies for c-family/c-lex.o.

2012-06-19  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (FIST_ROUNDING): New int iterator.
        (rounding): Handle UNSPEC_FIST_{FLOOR,CEIL}.
        (ROUNDING): Ditto.
        (*fist<mode>2_<rounding>_1): Macroize insn from
        *fist<mode>2_{floor,ceil}_1 using FIST_ROUNDING int iterator.
        (fistdi2_<rounding>): Macroize insn from
        fistdi2_{floor,ceil} using FIST_ROUNDING int iterator.
        (fistdi2_<rounding>_with_temp and splitters): Macroize insn and
        corresponding splitters from fistdi2_{floor,ceil} and corresponding
        splitters using FIST_ROUNDING int iterator.
        (fist<mode>2_<rounding>): Macroize insn from
        fist<mode>2_{floor,ceil} using FIST_ROUNDING int iterator.
        (fist<mode>2_<rounding>_with_temp and splitters): Macroize insn and
        corresponding splitters from fist<mode>2_{floor,ceil} and corresponding
        splitters using FIST_ROUNDING int iterator.
        (l<rounding>xf<mode>2): Macroize expander from l{floor,ceil}xf<mode>2
        using FIST_ROUNDING int iterator.

2012-06-19  Richard Henderson  <rth@redhat.com>

        * config/i386/i386-protos.h (ix86_expand_sse2_mulv4si3): Declare.
        * config/i386/i386.c (ix86_expand_sse2_mulv4si3): New.
        * config/i386/predicates.md (nonimmediate_or_const_vector_operand): New.
        * config/i386/sse.md (sse2_mulv4si3): Delete.
        (mul<VI4_AVX2>3): Use ix86_expand_sse2_mulv4si3 and
        nonimmediate_or_const_vector_operand.

2012-06-19  Richard Henderson  <rth@redhat.com>

        * expmed.c (struct init_expmed_rtl): Split ...
        (init_expmed_one_mode): ... out of ...
        (init_expmed): ... here.  Initialize integer vector modes also.
        (synth_mult): Handle integer vector modes.
        (choose_mult_variant): Likewise.
        (expand_mult_const): Likewise.
        (expand_mult): Likewise.
        * machmode.h (GET_MODE_UNIT_BITSIZE): New.

2012-06-19  Richard Henderson  <rth@redhat.com>

        * config/i386/i386.c (ix86_rtx_costs): Handle CONST_VECTOR, and
        integral vector modes.

2012-06-19  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (FRNDINT_ROUNDING): New int iterator.
        (rounding): New int attribute.
        (ROUNDING): Ditto.
        (frndintxf2_<rounding>): Macroize insn from
        frndintxf2_{floor,ceil,trunc} using FRNDINT_ROUNDING int iterator.
        (frndintxf2_<rounding>_i387): Macroize insn from
        frndintxf2_{floor,ceil,trunc}_i387 using FRNDINT_ROUNDING int iterator.

2012-06-19  Richard Guenther  <rguenther@suse.de>

        * tree-vrp.c (union_ranges): New function.
        (vrp_meet_1): Use union_ranges.
        (vrp_meet): Dump what we union and call vrp_meet_1.

2012-06-19  Richard Earnshaw  <rearnsha@arm.com>

        * arm.md (enum unspec): Delete UNSPEC_SIN and UNSPEC_COS.
        (attr type): Remove fmul, ffmul, farith, ffarith, float_em
        f_fpa_load, f_fpa_store, f_mem_r, r_mem_f.
        (attr write_conflict, attr core_cycles): Update.
        * arm-generic.md (r_mem_f_wbuf): Delete reservation.

2012-06-19  Richard Guenther  <rguenther@suse.de>

        * tree-vrp.c (intersect_ranges): Handle more cases.
        (vrp_intersect_ranges): Dump what we intersect and call ...
        (vrp_intersect_ranges_1): ... this.

2012-06-19  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53708
        * tree-vect-data-refs.c (vect_can_force_dr_alignment_p): Preserve
        user-supplied alignment and alignment of decls with the used
        attribute.

2012-06-18  Lawrence Crowl  <crowl@google.com>

        * timevar.def (TV_PHASE_GENERATE): Rename to TV_PHASE_LATE_ASM.
        (TV_PHASE_CGRAPH): Rename to TV_PHASE_OPT_GEN.
        (TV_PHASE_STREAM_IN): New.
        (TV_PHASE_STREAM_OUT): New.
        * timevar.c (validate_phases): New.
        (timevar_print): Call validate_phases.
        * c-decl.c (c_write_global_declarations): Rename use of TV_PHASE_CGRAPH
        to TV_PHASE_OPT_GEN.
        * langhooks.c (write_global_declarations): Rename use of
        TV_PHASE_CGRAPH to TV_PHASE_OPT_GEN.  Use TV_PHASE_DBGINFO instead of
        TV_PHASE_CHECK_DBGINFO.
        * toplev.c (compile_file): Rename use of TV_PHASE_GENERATE to
        TV_PHASE_LATE_ASM.  Move start of TV_PHASE_LATE_ASM to after call to
        lang_hooks.decls.final_write_globals.

2012-06-18  David Edelshn  <dje.gcc@gmail.com>

        * config/rs6000/aix52.h (TARGET_EXTRA_BUILTINS): Define as 0.

2012-06-18  Uros Bizjak  <ubizjak@gmail.com>

        PR target/53712
        * config/i386/sse.md (*sse4_2_pcmpestr_unaligned): New.
        (*sse4_2_pcmpistr_unaligned): New.

2012-06-18  Ian Bolton  <ian.bolton@arm.com>
            Sameera Deshpande  <sameera.deshpande@arm.com>
            Greta Yorsh  <greta.yorsh@arm.com>

        * config/arm/arm-protos.h (arm_output_epilogue): Remove.
        * config/arm/arm.c (print_multi_reg): Remove.
        (vfp_output_fldmd): Likewise.
        (arm_output_epilogue): Likewise.
        * config/arm/arm.md (epilogue_insns): Update condition and code.

2012-06-18  Ian Bolton  <ian.bolton@arm.com>
            Sameera Deshpande  <sameera.deshpande@arm.com>
            Greta Yorsh  <greta.yorsh@arm.com>

        * config/arm/arm-protos.h (thumb2_expand_return): New declaration.
        * config/arm/arm.c (thumb2_expand_return): New function.
        * config/arm/arm.md (return): Update condition and code.

2012-06-18  Ian Bolton  <ian.bolton@arm.com>
            Sameera Deshpande  <sameera.deshpande@arm.com>
            Greta Yorsh  <greta.yorsh@arm.com>

        * config/arm/arm-protos.h (output_return_instruction): New parameter
        and int to bool change of parameter types.
        * config/arm/arm.c (output_return_instruction): Likewise.
        * config/arm/arm.md (arm_simple_return): New pattern.
        (arm_return, cond_return, cond_return_inverted): Add new arguments.
        * config/arm/thumb2.md (thumb2_return): Update condition and code.

2012-06-18  Ian Bolton  <ian.bolton@arm.com>
            Sameera Deshpande  <sameera.deshpande@arm.com>
            Greta Yorsh  <greta.yorsh@arm.com>

        * config/arm/arm-protos.h (arm_expand_epilogue): New declaration.
        * config/arm/arm.c (arm_expand_epilogue): New function.
        * config/arm/arm.md (epilogue): Update condition and code.
        (sibcall_epilogue): Likewise.

2012-06-18  Ian Bolton  <ian.bolton@arm.com>
            Sameera Deshpande  <sameera.deshpande@arm.com>
            Greta Yorsh  <greta.yorsh@arm.com>

        * config/arm/arm.c (arm_expand_epilogue_apcs_frame): New function.
        * config/arm/arm.md (arm_addsi3) Add an alternative.

2012-06-18  Ian Bolton  <ian.bolton@arm.com>
            Sameera Deshpande  <sameera.deshpande@arm.com>
            Greta Yorsh  <greta.yorsh@arm.com>

        * config/arm/arm.md (vfp_pop_multiple_with_writeback) New define_insn.
        * config/arm/predicates.md (pop_multiple_fp) New special predicate.
        * config/arm/arm.c (arm_emit_vfp_multi_reg_pop): New function.

2012-06-18  Ian Bolton  <ian.bolton@arm.com>
            Sameera Deshpande  <sameera.deshpande@arm.com>
            Greta Yorsh  <greta.yorsh@arm.com>

        * config/arm/arm.md (load_multiple_with_writeback) New define_insn.
        (load_multiple, pop_multiple_with_writeback_and_return) Likewise.
        (pop_multiple_with_return, ldr_with_return) Likewise.
        * config/arm/predicates.md (pop_multiple_return) New special predicate.
        * config/arm/arm-protos.h (arm_output_multireg_pop) New declaration.
        * config/arm/arm.c (arm_output_multireg_pop) New function.
        (arm_emit_multi_reg_pop): New function.

2012-06-18  Greta Yorsh  <Greta.Yorsh@arm.com>

        * config/arm/arm.c (ldm_stm_operation_p): Require SP
        as base register for loads if SP is in the register list.

2012-06-18  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53693
        * tree-vect-patterns.c (vect_operation_fits_smaller_type):
        Reject operands with more than one use.

2012-06-18  Bill Schmidt  <wschmidt@linux.ibm.com>

        PR tree-optimization/53703
        * tree-ssa-phiopt.c (hoist_adjacent_loads): Skip virtual phis;
        correctly set bb_for_def[12].

2012-06-18  Steven Bosscher  <steven@gcc.gnu.org>

        * config/vax/vax.h (VMS_TARGET): Remove.

2012-06-18  Richard Guenther  <rguenther@suse.de>

        * tree-vrp.c (extract_range_from_assert): Split out range
        intersecting code.
        (intersect_ranges): New function.
        (vrp_intersect_ranges): Likewise.

2012-06-18  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * config/s390/s390.c (s390_gimplify_va_arg): Revert change from
        r187965.

2012-06-18  Tejas Belagod  <tejas.belagod@arm.com>

        * doc/md.texi: Document int iterators.
        * read-rtl.c (ints): New iterator group.
        (find_int): Int iterator group callback.
        (apply_int_iterator): Likewise.
        (apply_iterators): Traverse int iterator table and add all the used
        iterators to list.
        (initialize_iterators): Initialize data structures and callbacks for
        int iterators.
        (read_rtx): Parse and read mappings for int iterators.
        (read_rtx_code): Record int iterator usage.

2012-06-18  Richard Sandiford  <rdsandiford@googlemail.com>

        PR middle-end/53698
        * expr.c (expand_expr_addr_expr_1): Convert to tmode before
        performing an addition.

2012-06-17  Steven Bosscher  <steven@gcc.gnu.org>

        * output.h (split_double): Move prototype to rtl.h.
        (constructor_static_from_elts_p): Move prototype to tree.c.
        * rtl.h (split_double): Moved here from output.h.
        * tree.h (constructor_static_from_elts_p): Moved here from output.h.
        * final.c (split_double): Move from here ...
        * rtlanal.c (split_double): ... to here.
        * expr.c: Do not include output.h.

2012-06-17  Steven Bosscher  <steven@gcc.gnu.org>

        * cfglayout.h: Remove.
        * cfglayout.c: Remove.
        * function.h (struct function): Remove x_last_location field.
        * function.c: Do not include cfglayout.h.
        (expand_function_start): Do not call no-op force_next_line_note.
        (expand_function_end): Likewise.
        * cfgrtl.c: Do not include cfglayout.h.  Include gt-cfgrtl.h.
        (unlink_insn_chain): Moved here from cfglayout.c.
        (skip_insns_after_block, label_for_bb, record_effective_endpoints,
        into_cfg_layout_mode, outof_cfg_layout_mode,
        pass_into_cfg_layout_mode, pass_outof_cfg_layout_mode,
        relink_block_chain, fixup_reorder_chain, verify_insn_chain,
        fixup_fallthru_exit_predecessor, force_one_exit_fallthru,
        cfg_layout_can_duplicate_bb_p, duplicate_insn_chain,
        cfg_layout_duplicate_bb, cfg_layout_initialize, break_superblocks,
        cfg_layout_finalize): Likewise.
        (rtl_can_remove_branch_p): Likewise.
        * rtl.h (insn_scope): Move prototype from cfglayout.h here.
        (duplicate_insn_chain): Likewise.
        (force_next_line_note): Remove prototype.
        * emit-rtl.c: Do not include tree-flow.h, egad.  Include vecprim.h.
        (last_location): Remove #define to emit.x_last_location.
        (force_next_line_note): Remove no-op function.
        (init_emit): Don't set x_last_location.
        (block_locators_locs, block_locators_blocks, locations_locators_locs,
        locations_locators_vals, prologue_locator, epilogue_locator,
        curr_location, last_location, curr_block, last_block, curr_rtl_loc):
        Move POD to here from cfglayout.c.
        (insn_locators_alloc, insn_locators_finalize, insn_locators_free,
        set_curr_insn_source_location, get_curr_insn_source_location,
        set_curr_insn_block, get_curr_insn_block, curr_insn_locator,
        locator_scope, insn_scope, locator_location, locator_line, insn_line,
        locator_file, insn_file, locator_eq): Move to here from cfglayout.c.
        * cfghooks.h: Remove double-include protection.
        (can_copy_bbs_p, copy_bbs): Move prototypes from cfglayout.h to here.
        * cfghooks.c (can_copy_bbs_p, copy_bbs): Move to here from cfglayout.c.
        * final.c: Do not include cfglayout.h.
        (choose_inner_scope, change_scope): Move to here from cfglayout.c.
        (reemit_insn_block_notes): Likewise.  Make static.
        * tree-flow.h (tree_could_trap_p, operation_could_trap_helper_p,
        operation_could_trap_p, tree_could_throw_p): Move from here...
        * tree.h: ... to here.
        * gengtype.c (open_base_files): Remove cfglayout.h from the list.
        * profile.c: Do not include cfghooks.h.
        * cfgloopmanip.c: Do not include cfglayout.h and cfghooks.h.
        * modulo-sched.c: Likewise.
        * loop-unswitch.c: Do not include cfglayout.h.
        * sched-ebb.c: Likewise.
        * tracer.c: Likewise.
        * ddg.c: Likewise.
        * tree-vect-loop-manip.c: Likewise.
        * loop-init.c: Likewise.
        * dwarf2out.c: Likewise.
        * hw-doloop.c: Likewise.
        * loop-unroll.c: Likewise.
        * cfgcleanup.c: Likewise.
        * bb-reorder.c: Likewise.
        * sched-rgn.c: Likewise.
        * tree-cfg.c: Likewise.
        * config/alpha/alpha.c: Likewise.
        * config/spu/spu.c: Likewise.
        * config/sparc/sparc.c: Likewise.
        * config/sh/sh.c: Likewise.
        * config/c6x/c6x.c: Likewise.
        * config/ia64/ia64.c: Likewise.
        * config/rs6000/rs6000.c: Likewise.
        * config/score/score.c: Likewise.
        * config/mips/mips.c: Likewise.
        * config/bfin/bfin.c: Likewise.
        * Makefile.in (CFGAYOUT_H): Remove, and fixup users.
        * config/rs6000/t-rs6000 (rs6000.o): Do not depend on cfglayout.h.
        * config/spu/t-spu-elf (spu.o: $): Likewise.
        * config/sparc/t-sparc (sparc.o): Do not depend on CFGLAYOUT_H.

2012-06-17  Steven Bosscher  <steven@gcc.gnu.org>

        * cfgloop.h: Do not include rtl.h.
        (enum iv_extend_code): New.
        (struct rtx_iv): Use iv_extend_code instead of rtx_code.
        * Makefile.in (CFGLOOP_H): Do not depend on RTL_H.
        * loop-iv.c (iv_extend_to_rtx_code): New function to translate
        an IV_EXTEND_CODE to an RTX_CODE.
        (dump_iv_info): Update for rtx_iv field type change.
        (iv_constant): Likewise.
        (iv_subreg): Likewise.
        (iv_extend): Likewise.
        (iv_neg): Likewise.
        (iv_add): Likewise.
        (iv_mult): Likewise.
        (iv_shift): Likewise.
        (get_biv_step_1): Likewise.
        (get_biv_step): Likewise.
        (iv_analyze_biv): Likewise.
        (get_iv_value): Likewise.
        (shorten_into_mode): Likewise.
        (canonicalize_iv_subregs): Likewise.
        * sese.c (sese_build_liveouts): Use MAY_HAVE_DEBUG_STMTS instead
        of MAY_HAVE_DEBUG_INSNS.
        * tree-ssa-loop-ivopts.c: Include recog.h after expr.h.
        * tree-ssa-loop-prefetch.c: Likewise.

2012-06-17  Steven Bosscher  <steven@gcc.gnu.org>

        * expmed.c (ceil_log2): Move from here...
        * hwint.c: ... to here for older GCCs...
        * hwint.h: ... and here for newer GCCs.
        * rtl.h (ceil_log2): Remove prototype.

        * tree-phinodes.c: Do not include rtl.h.
        * Makefile.in (tree-phinodes.o): Do not depend on RTL_H.

2012-06-17  Steven Bosscher  <steven@gcc.gnu.org>

        * config/cris/cris.h (TARGET_ELF): Remove.
        (FORCE_EH_FRAME_INFO_IN_DATA_SECTION): Remove.
        (CRIS_ASM_OUTPUT_ALIGNED_DECL_COMMON): Simpify using TARGET_ELF==1.
        (LOCAL_LABEL_PREFIX): Likewise.
        * config/cris/cris.c (cris_target_asm_named_section): Remove.
        (cris_option_override): Simpify using TARGET_ELF==1.
        (cris_file_start): Likewise.
        * config/cris/cris-protos.h (cris_target_asm_named_section): Remove.

2012-06-17  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/sse.md (vcvtph2ps): Fix vec_select selector.

2012-06-16  Eric Botcazou  <ebotcazou@adacore.com>

        PR middle-end/53590
        * tree-inline.c (initialize_cfun): Copy can_delete_dead_exceptions.

2012-06-15  Easwaran Raman  <eraman@google.com>

        * passes.c (init_optimization_passes): Remove pass_call_cdce
        from its current position and insert after pass_dce.

2012-06-15  Walter Lee  <walt@tilera.com>

        * config/tilegx/sync.md (atomic_fetch_<fetchop_name><mode>): Fix typo.

2012-06-15  Richard Earnshaw  <rearnsha@arm.com>

        * arm.c (note_invalid_constants): Don't return a result.
        (arm_memory_load_p): Delete function.
        (arm_const_double_rtx): Delete iterator variable i;
        (fp_immediate_constant): Likewise.
        (fp_const_from_val): Likewise.

        * arm.c (arm_init_iwmmxt_builtins): Delete void_ftype_void.

2012-06-15  Marc Glisse  <marc.glisse@inria.fr>

        PR c++/51033
        * c-typeck.c (c_build_vec_perm_expr): Move to c-family/c-common.c.
        * c-tree.h (c_build_vec_perm_expr): Move to c-family/c-common.h.

2012-06-15  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.c (avr_default_expand_builtin): New function.
        (avr_expand_builtin): Use it.
        (avr_expand_unop_builtin): Remove.
        (avr_expand_binop_builtin): Remove.
        (avr_expand_triop_builtin): Remove.

2012-06-15  Michael Matz  <matz@suse.de>

        PR middle-end/38474
        * cfgexpand.c (add_alias_set_conflicts): Remove.
        (expand_used_vars): Don't call it.
        (aggregate_contains_union_type): Remove.
        * function.c (n_temp_slots_in_use): New static data.
        (make_slot_available, assign_stack_temp_for_type): Update it.
        (init_temp_slots): Zero it.
        (remove_unused_temp_slot_addresses): Use it for quicker removal.
        (remove_unused_temp_slot_addresses_1): Use htab_clear_slot.

2012-06-15  Michael Matz  <matz@suse.de>

        * gimplify.c (gimplify_compound_literal_expr): Take gimple_test_f
        argument, don't emit assign statement if value is directly usable.
        (gimplify_expr): Adjust.

2012-06-15  Michael Matz  <matz@suse.de>

        * gimplify.c (gimplify_modify_expr): Fold generated statements.
        * gimple-fold.c (can_refer_decl_in_current_unit_p): Check flag_ltrans.

2012-06-15  Richard Guenther  <rguenther@suse.de>

        * tree-vrp.c (set_and_canonicalize_value_range): Use canonical
        predicates to set VR_UNDEFINED and VR_VARYING.  Drop a case
        we assert for in set_value_range to VR_VARYING.

2012-06-15  Richard Earnshaw  <rearnsha@arm.com>

        * arm.md (addsf3, adddf3): Use s_register_operand.
        (subsf3, subdf3): Likewise.
        (mulsf3, muldf3): Likewise.
        (difsf3, divdf3): Likewise.
        (movsfcc, movdfcc): Likewise.
        * predicates.md (f_register_operand): Delete.
        (arm_float_rhs_operand): Delete.
        (arm_float_add_operand): Delete.
        (arm_float_compare_operand): Use s_register_operand when
        there's no VFP.
        (cirrus_register_operand): Delete.
        (cirrus_fp_register): Delete.
        (cirrus_shift_const): Delete.
        (cmpdi_operand): Remove Maverick support.
        * constraints.md (f, v, H): Delete constraints.
        (G): Update documentation.
        * arm.c (fp_consts_inited): Convert to bool.
        (strings_fp): Delete.
        (values_fp): Delete.
        (value_fp0): New variable.
        (init_fp_table): Simplify logic.
        (arm_const_double_rtx): Likewise.
        (fp_immediate_constant): Likewise.
        (fp_const_from_val): Likewise.
        (neg_const_double_rtx_ok_for_fpa): Delete.
        * doc/md.texi (ARM constraints): Update documentation.

2012-06-15  Ulrich Weigand  <ulrich.weigand@linaro.org>

        PR tree-optimization/53636
        * tree-vect-data-refs.c (vect_compute_data_ref_alignment): Verify
        stride when doing basic-block vectorization.

2012-06-15  Ramana Radhakrishnan  <ramana.radhakrishnan@linaro.org>

        * tree-vect-generic.c (lower_vec_perm): Propagate vector constants
        into VEC_PERM_EXPR.

2012-06-15  Jakub Jelinek  <jakub@redhat.com>

        * tree-vect-patterns.c (vect_pattern_recog): Don't unnecessarily
        allocate and free bbs array for the SLP case.

        PR tree-optimization/51581
        * expr.h (choose_multiplier): New prototype.
        * expmed.c (choose_multiplier): No longer static.
        Change multiplier_ptr from rtx * to UHWI *.
        (expand_divmod): Adjust callers.
        * tree-vect-patterns.c (vect_recog_sdivmod_pow2_pattern): Renamed to...
        (vect_recog_divmod_pattern): ... this.  Pass bb_vinfo as last
        argument to new_stmt_vec_info.  Attempt to optimize also divisions
        by non-pow2 constants if integer vector division isn't supported.
        * tree-vect-stmts.c (vect_analyze_stmt): If node != NULL,
        don't look at pattern stmts and sequences.

2012-06-15  Eric Botcazou  <ebotcazou@adacore.com>

        PR middle-end/53590
        * common.opt (-fdelete-dead-exceptions): New switch.
        * doc/invoke.texi (Code Gen Options): Document it.
        * cse.c (count_reg_usage) <CALL_INSN>: Use !insn_nothrow_p in lieu of
        insn_could_throw_p predicate.  Do not skip an insn that could throw
        if dead exceptions can be deleted.
        (insn_live_p): Likewise, do not return true in that case.
        * dce.c (can_alter_cfg): New flag.
        (deletable_insn_p): Do not return false for an insn that can throw if
        the CFG can be altered and dead exceptions can be deleted.
        (init_dce): Set can_alter_cfg to false for fast DCE, true otherwise.
        * dse.c (scan_insn): Use !insn_nothrow_p in lieu of insn_could_throw_
        predicate. Do not preserve an insn that could throw if dead exceptions
        can be deleted.
        * function.h (struct function): Add can_delete_dead_exceptions flag.
        * function.c (allocate_struct_function): Set it.
        * lto-streamer-in.c (input_struct_function_base): Stream it.
        * lto-streamer-out.c (input_struct_function_base): Likewise.
        * tree-ssa-dce.c (mark_stmt_if_obviously_necessary): Do not mark a
        statement that could throw as necessary if dead exceptions can be
        deleted.

2012-06-14  Maxim Kuvyrkov  <maxim@codesourcery.com>

        * config/tilegx/sync.md (atomic_fetch_sub<mode>): Fix typo.

2012-06-14  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/53568
        * config/sh/sh.md: Add peephole for swapbsi2.
        (*swapbisi2_and_shl8, *swapbhisi2): New insns and splits.

2012-06-14  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*zero_extendsidi2): Remove x,x alternative.
        (*zero_extendsidi2_rex64): Ditto.  Remove isa attribute.

2012-06-14  Jakub Jelinek  <jakub@redhat.com>

        PR target/53639
        * config/i386/i386.md (*anddi_1 into *andsi_1_zext splitter): New.

2012-06-14  Richard Earnshaw  <rearnsha@arm.com>

        * arm.c (arm_cirrus_insn_p): Delete.
        (cirrus_reorg): Delete.
        (arm_reorg): Don't call cirrus_reorg.
        (arm_final_prescan_insn_p): Don't check for cirrus insns.
        * arm.md (define_attr "type"): Remove mav_farith and mav_dmult.
        (adddi3, subdi3): Remove Maverick support.
        (arm_adddi3): Likewise.
        (adddi_sesidi_di, adddi_zesidi_di): Likewise.
        (addsf3, adddf3): Likewise.
        (subsf3, subdf3): Likewise.
        (mulsf3, muldf3): Likewise.
        (ashldi3, ashrdi3, lshrdi3): Likewise.
        (floatsisf2, floatsidf2): Likewise.
        (fix_truncsfsi2, fix_truncdfsi2): Likewise.
        (arm_movdi, thumb1_movdi_insn): Likewise.
        (arm_cmpdi_insn): Likewise.
        (cirrus_cmpsf, cirrus_cmpdf, cirrus_cmpdi): Likewise.
        (cirrus.md): Don't include.
        * cirrus.md: Delete file.
        * t-arm (MD_INCLUDES): Remove cirrus.md.

2012-06-14  Eric Botcazou  <ebotcazou@adacore.com>

        * dwarf2out.c (function_possibly_abstracted_p): New static function.
        (gen_subprogram_die): Use it function_possibly_abstracted_p in lieu of
        cgraph_function_possibly_inlined_p.
        (gen_inlined_subroutine_die): Return if the origin is to be ignored.
        (process_scope_var): Do not emit concrete instances of abstracted
        nested functions from here.
        (gen_decl_die): Emit the abstract instance if the function is possibly
        abstracted and not only possibly inlined.
        (dwarf2out_finish): Find the first non-abstract parent instance and
        attach concrete instances on the limbo list to it.

2012-06-14  Richard Earnshaw  <rearnsha@arm.com>

        * arm.md (divsf3, divdf3): Remove FPA support.
        (negsf2, negdf2): Likewise.
        (sqrtsf2, sqrtdf2): Likewise.
        (movdfcc): Likewise.
        (modsf3, moddf3, movxf): Delete.
        (push_fp_multi): Delete.
        (fpa.md): Don't include it.
        * fpa.md: Delete file.
        * t-arm (MD_INCLUDES): Remove fpa.md.

2012-06-14  Bill Schmidt  <wschmidt@linux.ibm.com>

        * tree-vectorizer.h (vect_get_stmt_cost): Move from tree-vect-stmts.c.
        (cost_for_stmt): Remove decl.
        (vect_get_single_scalar_iteration_cost): Correct typo in name.
        * tree-vect-loop.c (vect_get_cost): Remove.
        (vect_get_single_scalar_iteration_cost): Correct typo in name; use
        vect_get_stmt_cost rather than vect_get_cost.
        (vect_get_known_peeling_cost): Use vect_get_stmt_cost rather than
        vect_get_cost.
        (vect_estimate_min_profitable_iters): Correct typo in call to
        vect_get_single_scalar_iteration_cost; use vect_get_stmt_cost rather
        than vect_get_cost.
        (vect_model_reduction_cost): Use vect_get_stmt_cost rather than
        vect_get_cost.
        (vect_model_induction_cost): Likewise.
        * tree-vect-data-refs.c (vect_peeling_hash_get_lowest_cost): Correct
        typo in call to vect_get_single_scalar_iteration_cost.
        * tree-vect-stmts.c (vect_get_stmt_cost): Move to tree-vectorizer.h.
        (cost_for_stmt): Remove unnecessary function.
        * Makefile.in (TREE_VECTORIZER_H): Update dependencies.

2012-06-14  Richard Earnshaw  <rearnsha@arm.com>

        * arm.opt (mfp=2, mfp=3, mfpe, mfpe=2, mfpe=3): Delete options.
        * arm-fpus.def (fpa, fpe2, fpe3, maverick): Delete FPU types.
        * arm-tables.opt: Regenerated.
        * doc/invoke.texi: Remove references to deleted options.

2012-06-14  Sandeep Kumar Singh  <Sandeep.Singh2@kpitcummins.com>

        * config/h8300/genmova.sh: Modified to add offset bits of
        mova/Sz assembly instruction for memory access.
        * config/h8300/h8300.c: Likewise.
        * config/h8300/mova.md: Likewise.

2012-06-12  Christian Bruel  <christian.bruel@st.com>

        PR target/53621
        * config/sh/sh.c (sh_option_override): Don't force
         flag_omit_frame_pointer and maccumulate_outgoing_args.
        * config/sh/sh.opt (maccumulate-outgoing-args): Init as Var.

2012-06-14  Richard Guenther  <rguenther@suse.de>

        * tree-vrp.c (VR_INITIALIZER): New define.
        (ranges_from_anti_range): New function.
        (extract_range_from_binary_expr_1): Decompose operations on
        VR_ANTI_RANGEs to operations on VR_RANGE.
        (extract_range_from_unary_expr_1): Likewise.
        (extract_range_from_binary_expr_1, extract_range_from_binary_expr,
        extract_range_from_unary_expr_1, extract_range_from_unary_expr,
        extract_range_from_cond_expr, adjust_range_with_scev,
        vrp_visit_assignment_or_call, vrp_visit_phi_node,
        simplify_bit_ops_using_ranges): Use VR_INITIALIZER.

2012-06-13  Richard Henderson  <rth@redhat.com>

        * hwint.h (HOST_WIDEST_INT_C): New.
        (HOST_WIDE_INT_C): New.
        (HOST_WIDE_INT_1): Use it.
        * config/alpha/alpha.c (alpha_trampoline_init): Use it.

2012-06-13  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/49888
        * var-tracking.c: Include alias.h.
        (overlapping_mems): New struct.
        (drop_overlapping_mem_locs): New.
        (clobber_overlapping_mems): New.
        (var_mem_delete_and_set, var_mem_delete): Call it.
        (val_bind): Likewise, but only if modified.
        (compute_bb_dataflow, emit_notes_in_bb): Call it on MEMs.
        * Makefile.in (var-tracking.o): Depend in $(ALIAS_H).

2012-06-13  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/47624
        * var-tracking.c (loc_exp_dep_pool): New.
        (vt_emit_notes): Create and release the pool.
        (compute_bb_dataflow): Use value-based locations in MO_VAL_SET.
        (emit_notes_in_bb): Likewise.
        (loc_exp_dep_insert): Deal with NOT_ONEPART vars.
        (notify_dependents_of_changed_value): Likewise.
        (notify_dependents_of_resolved_value): Check that NOT_ONEPART
        variables don't have a VAR_LOC_DEP_LST.
        (emit_note_insn_var_location): Expand NOT_ONEPART locs that are
        VALUEs or MEMs of VALUEs.

2012-06-13  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/52983
        PR debug/48866
        * dce.c (word_dce_process_block): Insert debug temps only if the
        insn is not marked.
        (dce_process_block): Likewise, and if debug.used is not empty,
        and only after iterating over all DEFs that might mark the insn.

2012-06-13  Alexandre Oliva  <aoliva@redhat.com>

        * common.opt (ftree-coalesce-inlined-vars): New.
        (ftree-coalesce-vars): New.
        * doc/invoke.texi: Document them.
        * tree-ssa-copyrename.c (copy_rename_partition_coalesce):
        Implement them.

2012-06-13  Richard Sandiford  <rdsandiford@googlemail.com>

        * read-rtl.c (mapping): Remove index field.  Add current_value field.
        Define heap vectors.
        (iterator_group): Fix long line.  Remove num_builtins field and
        uses_iterator fields.  Make apply_iterator take a void * parameter.
        (iterator_use, atttribute_use): New structures.
        (iterator_traverse_data, BELLWETHER_CODE, bellwether_codes): Delete.
        (current_iterators, iterator_uses, attribute_uses): New variables.
        (uses_mode_iterator_p, uses_code_iterator_p): Delete.
        (apply_mode_iterator, apply_code_iterator): Take a void * parameter.
        (map_attr_string, apply_iterator_to_string): Remove iterator
        and value parameters.  Look through all current iterator values
        for a matching attribute.
        (mode_attr_index, apply_mode_maps): Delete.
        (apply_iterator_to_rtx): Replace with...
        (copy_rtx_for_iterators): ...this new function.
        (uses_iterator_p, apply_iterator_traverse): Delete.
        (apply_attribute_uses, add_current_iterators, apply_iterators): New
        functions.
        (add_mapping): Remove index field.  Set current_value field.
        (initialize_iterators): Don't set num_builtins and uses_iterator_p
        fields.
        (find_iterator): Delete.
        (record_iterator_use, record_attribute_use): New functions.
        (record_potential_iterator_use): New function.
        (check_code_iterator): Remove handling of bellwether codes.
        (read_rtx): Remove mode maps.  Truncate iterator and attribute uses.
        (read_rtx_code, read_nested_rtx, read_rtx_variadic): Remove mode_maps
        parameter.  Use the first code iterator value instead of the
        bellwether_codes array.  Use record_potential_iterator_use for modes.

2012-06-13  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/53568
        * config/sh/sh.md (bswapsi2): New expander.
        (swapbsi2): New insn.

2012-06-13  H.J. Lu  <hongjiu.lu@intel.com>

        PR target/53647
        * config/i386/i386.c (ix86_tune_cost): New variable.
        (ix86_option_override_internal): Set ix86_tune_cost.  Use
        ix86_tune_cost for simultaneous_prefetches, prefetch_block,
        l1_cache_size and l2_cache_size.

2012-06-13  Richard Guenther  <rguenther@suse.de>

        * tree-vrp.c (vrp_meet): Properly meet equivalent ranges.
        Handle meeting two VR_RANGE to an VR_ANTI_RANGE.  Implement
        all possible meetings of VR_RANGE with VR_ANTI_RANGE and
        VR_ANTI_RANGE with VR_ANTI_RANGE.

2012-06-13  Richard Earnshaw  <rearnsha@arm.com>

        * config.gcc (unsupported): Move obsoleted FPA-based configurations
        here from ...
        (obsolete): ... here.
        (arm*-*-freebsd*): Remove.
        (arm*-*-linux*): Only accept EABI variants.  Simplify logic.
        (arm*-*-uclinux*): Likewise.
        (arm*-*-ecos-elf): Remove.
        (arm*-*-rtems*): Remove.
        (arm*-*-elf): Remove.
        (arm*-wince-pe*): Remove.
        (arm, --with-fpu): Remove support for fpa and Maverick variants.
        * arm/ecos-elf.h: Delete.
        * arm/t-strongarm-elf: Delete.
        * arm/rtems-elf.h: Delete.
        * arm/wince-pe.h: Delete.
        * arm/pe.c: Delete.
        * arm/pe.h: Delete.
        * arm/t-wince-pe: Delete.

2012-06-13  Bill Schmidt  <wschmidt@linux.ibm.com>

        PR tree-optimization/53647
        * tree-ssa-phiopt.c (gate_hoist_loads): Skip transformation for
        targets with no defined cache line size.

2012-06-13  Bill Schmidt  <wschmidt@linux.ibm.com>

        * targhooks.c (default_builtin_vectorized_conversion): Handle
        vec_construct, using vectype to base cost on subparts.
        * target.h (enum vect_cost_for_stmt): Add vec_construct.
        * tree-vect-stmts.c (vect_model_load_cost): Use vec_construct
        instead of scalar_to-vec.
        * config/spu/spu.c (spu_builtin_vectorization_cost): Handle
        vec_construct in same way as default for now.
        * config/i386/i386.c (ix86_builtin_vectorization_cost): Likewise.
        * config/rs6000/rs6000.c (rs6000_builtin_vectorization_cost):
        Handle vec_construct, including special case for 32-bit loads.

2012-06-13  Xinyu Qi <xyqi@marvell.com>

        * config/arm/arm.c (FL_IWMMXT2): New define.
        (arm_arch_iwmmxt2): New variable.
        (arm_option_override): Enable use of iWMMXt with VFP.
        Disable use of iWMMXt with NEON. Disable use of iWMMXt under
        Thumb mode. Set arm_arch_iwmmxt2.
        (arm_expand_binop_builtin): Accept VOIDmode op.
        (enum arm_builtins): Revise built-in fcode.
        (IWMMXT2_BUILTIN): New define.
        (IWMMXT2_BUILTIN2): Likewise.
        (iwmmx2_mbuiltin): Likewise.
        (builtin_description bdesc_2arg): Revise built in declaration.
        (builtin_description bdesc_1arg): Likewise.
        (arm_init_iwmmxt_builtins): Revise built in initialization.
        (arm_expand_builtin): Revise built in expansion.
        (arm_output_iwmmxt_shift_immediate): New function.
        (arm_output_iwmmxt_tinsr): Likewise.
        * config/arm/arm-protos.h (arm_output_iwmmxt_shift_immediate): Declare.
        (arm_output_iwmmxt_tinsr): Likewise.
        * config/arm/iwmmxt.md (WCGR0, WCGR1, WCGR2, WCGR3): New constant.
        (iwmmxt_psadbw, iwmmxt_walign, iwmmxt_tmrc, iwmmxt_tmcr): Delete.
        (rorv4hi3, rorv2si3, rordi3): Likewise.
        (rorv4hi3_di, rorv2si3_di, rordi3_di): Likewise.
        (ashrv4hi3_di, ashrv2si3_di, ashrdi3_di): Likewise.
        (lshrv4hi3_di, lshrv2si3_di, lshrdi3_di): Likewise.
        (ashlv4hi3_di, ashlv2si3_di, ashldi3_di): Likewise.
        (iwmmxt_tbcstqi, iwmmxt_tbcsthi, iwmmxt_tbcstsi): Likewise
        (*iwmmxt_clrv8qi, *iwmmxt_clrv4hi, *iwmmxt_clrv2si): Likewise.
        (tbcstv8qi, tbcstv4hi, tbsctv2si): New pattern.
        (iwmmxt_clrv8qi, iwmmxt_clrv4hi, iwmmxt_clrv2si): Likewise.
        (*and<mode>3_iwmmxt, *ior<mode>3_iwmmxt, *xor<mode>3_iwmmxt): Likewise.
        (ror<mode>3, ror<mode>3_di): Likewise.
        (ashr<mode>3_di, lshr<mode>3_di, ashl<mode>3_di): Likewise.
        (ashli<mode>3_iwmmxt, iwmmxt_waligni, iwmmxt_walignr): Likewise.
        (iwmmxt_walignr0, iwmmxt_walignr1): Likewise.
        (iwmmxt_walignr2, iwmmxt_walignr3): Likewise.
        (iwmmxt_setwcgr0, iwmmxt_setwcgr1): Likewise.
        (iwmmxt_setwcgr2, iwmmxt_setwcgr3): Likewise.
        (iwmmxt_getwcgr0, iwmmxt_getwcgr1): Likewise.
        (iwmmxt_getwcgr2, iwmmxt_getwcgr3): Likewise.
        (All instruction patterns): Add wtype attribute.
        (*iwmmxt_arm_movdi, *iwmmxt_movsi_insn): iWMMXt coexist with vfp.
        (iwmmxt_uavgrndv8qi3, iwmmxt_uavgrndv4hi3): Revise the pattern.
        (iwmmxt_uavgv8qi3, iwmmxt_uavgv4hi3): Likewise.
        (ashr<mode>3_iwmmxt, ashl<mode>3_iwmmxt, lshr<mode>3_iwmmxt): Likewise.
        (iwmmxt_tinsrb, iwmmxt_tinsrh, iwmmxt_tinsrw):Likewise.
        (eqv8qi3, eqv4hi3, eqv2si3, gtuv8qi3): Likewise.
        (gtuv4hi3, gtuv2si3, gtv8qi3, gtv4hi3, gtv2si3): Likewise.
        (iwmmxt_wunpckihh, iwmmxt_wunpckihw, iwmmxt_wunpckilh): Likewise.
        (iwmmxt_wunpckilw, iwmmxt_wunpckehub, iwmmxt_wunpckehuh): Likewise.
        (iwmmxt_wunpckehuw, iwmmxt_wunpckehsb, iwmmxt_wunpckehsh): Likewise.
        (iwmmxt_wunpckehsw, iwmmxt_wunpckelub, iwmmxt_wunpckeluh): Likewise.
        (iwmmxt_wunpckeluw, iwmmxt_wunpckelsb, iwmmxt_wunpckelsh): Likewise.
        (iwmmxt_wunpckelsw, iwmmxt_wmadds, iwmmxt_wmaddu): Likewise.
        (iwmmxt_wsadb, iwmmxt_wsadh, iwmmxt_wsadbz, iwmmxt_wsadhz): Likewise.
        (iwmmxt2.md): Include.
        * config/arm/arm.h (TARGET_CPU_CPP_BUILTINS): Define __IWMMXT2__.
        (TARGET_IWMMXT2): New define.
        (TARGET_REALLY_IWMMXT2): Likewise.
        (arm_arch_iwmmxt2): Declare.
        * config/arm/mmintrin.h: Use __IWMMXT__ to enable iWMMXt intrinsics.
        Use __IWMMXT2__ to enable iWMMXt2 intrinsics.
        Use C name-mangling for intrinsics.
        (__v8qi): Redefine.
        (_mm_cvtsi32_si64, _mm_andnot_si64, _mm_sad_pu8): Revise.
        (_mm_sad_pu16, _mm_align_si64, _mm_setwcx, _mm_getwcx): Likewise.
        (_m_from_int): Likewise.
        (_mm_sada_pu8, _mm_sada_pu16): New intrinsic.
        (_mm_alignr0_si64, _mm_alignr1_si64, _mm_alignr2_si64): Likewise.
        (_mm_alignr3_si64, _mm_tandcb, _mm_tandch, _mm_tandcw): Likewise.
        (_mm_textrcb, _mm_textrch, _mm_textrcw, _mm_torcb): Likewise.
        (_mm_torch, _mm_torcw, _mm_tbcst_pi8, _mm_tbcst_pi16): Likewise.
        (_mm_tbcst_pi32): Likewise.
        (_mm_abs_pi8, _mm_abs_pi16, _mm_abs_pi32): New iWMMXt2 intrinsic.
        (_mm_addsubhx_pi16, _mm_absdiff_pu8, _mm_absdiff_pu16): Likewise.
        (_mm_absdiff_pu32, _mm_addc_pu16, _mm_addc_pu32): Likewise.
        (_mm_avg4_pu8, _mm_avg4r_pu8, _mm_maddx_pi16, _mm_maddx_pu16): Likewise.
        (_mm_msub_pi16, _mm_msub_pu16, _mm_mulhi_pi32): Likewise.
        (_mm_mulhi_pu32, _mm_mulhir_pi16, _mm_mulhir_pi32): Likewise.
        (_mm_mulhir_pu16, _mm_mulhir_pu32, _mm_mullo_pi32): Likewise.
        (_mm_qmulm_pi16, _mm_qmulm_pi32, _mm_qmulmr_pi16): Likewise.
        (_mm_qmulmr_pi32, _mm_subaddhx_pi16, _mm_addbhusl_pu8): Likewise.
        (_mm_addbhusm_pu8, _mm_qmiabb_pi32, _mm_qmiabbn_pi32): Likewise.
        (_mm_qmiabt_pi32, _mm_qmiabtn_pi32, _mm_qmiatb_pi32): Likewise.
        (_mm_qmiatbn_pi32, _mm_qmiatt_pi32, _mm_qmiattn_pi32): Likewise.
        (_mm_wmiabb_si64, _mm_wmiabbn_si64, _mm_wmiabt_si64): Likewise.
        (_mm_wmiabtn_si64, _mm_wmiatb_si64, _mm_wmiatbn_si64): Likewise.
        (_mm_wmiatt_si64, _mm_wmiattn_si64, _mm_wmiawbb_si64): Likewise.
        (_mm_wmiawbbn_si64, _mm_wmiawbt_si64, _mm_wmiawbtn_si64): Likewise.
        (_mm_wmiawtb_si64, _mm_wmiawtbn_si64, _mm_wmiawtt_si64): Likewise.
        (_mm_wmiawttn_si64, _mm_merge_si64): Likewise.
        (_mm_torvscb, _mm_torvsch, _mm_torvscw): Likewise.
        (_m_to_int): New define.
        * config/arm/arm-cores.def (iwmmxt2): Add FL_IWMMXT2.
        * config/arm/arm-arches.def (iwmmxt2): Likewise.
        * config/arm/t-arm (MD_INCLUDES): Add marvell-f-iwmmxt.md and
        iwmmxt2.md.
        * config/arm/arm.md (marvell-f-iwmmxt.md): Include.
        (arch): Add "iwmmxt2".
        (arch_enabled): Handle "iwmmxt2".
        (wtype): New attribute.
        (UNSPEC_WMADDS, UNSPEC_WMADDU): Delete.
        (UNSPEC_WALIGNI): New unspec.
        * config/arm/predicates.md (imm_or_reg_operand): New predicate.
        * config/arm/iterators.md (VMMX2): New mode_iterator.
        * config/arm/marvell-f-iwmmxt.md: New file.
        * config/arm/iwmmxt2.md: New file.

2012-06-12  Jakub Jelinek  <jakub@redhat.com>

        PR c/53532
        PR c/51034
        PR c/53196
        * c-decl.c (build_compound_literal): Call c_incomplete_type_error
        if type isn't complete.

2012-06-12  Uros Bizjak  <ubizjak@gmail.com>

        * config/ia64/sync.md (fetchop_name): Change ior attribute to "or".

2012-06-12  Richard Henderson  <rth@redhat.com>

        * config/rs6000/sync.md (atomic_load, atomic_store): Use INT1 mode
        iterator instead of INT.

2012-06-12  Bill Schmidt  <wschmidt@linux.ibm.com>

        * opts.c: Add -fhoist-adjacent-loads to -O2 and above.
        * tree-ssa-phiopt.c (tree_ssa_phiopt_worker): Add argument to forward
        declaration.
        (hoist_adjacent_loads, gate_hoist_loads): New forward declarations.
        (tree_ssa_phiopt): Call gate_hoist_loads.
        (tree_ssa_cs_elim): Add parm to tree_ssa_phiopt_worker call.
        (tree_ssa_phiopt_worker): Add do_hoist_loads to formal arg list; call
        hoist_adjacent_loads.
        (local_mem_dependence): New function.
        (hoist_adjacent_loads): Likewise.
        (gate_hoist_loads): Likewise.
        * common.opt (fhoist-adjacent-loads): New switch.
        * Makefile.in (tree-ssa-phiopt.o): Added dependencies.

2012-06-12  Michael Matz  <matz@suse.de>

        * alias.c (nonoverlapping_component_refs_p): Take two rtx arguments.
        (nonoverlapping_memrefs_p): Don't call it here ...
        (true_dependence_1): ... but here.

2012-06-12  Richard Guenther  <rguenther@suse.de>

        * emit-rtl.c (set_mem_attributes_minus_bitpos): Remove dead code.
        * alias.c (ao_ref_from_mem): MEM_EXPR is conservative, MEM_OFFSET
        and MEM_SIZE only refines it.  Reflect that and be less conservative
        if either of the latter is not known.

2012-06-12  Jakub Jelinek  <jakub@redhat.com>

        PR rtl-optimization/53589
        * cfgrtl.c (force_nonfallthru_and_redirect): Do asm_goto_edge
        discovery even when e->dest != target.  If any LABEL_REF points
        to e->dest label, redirect it to target's label.

2012-06-12  Chung-Lin Tang  <cltang@codesourcery.com>

        * config/sh/sh.c (output_stack_adjust): Remove !epilogue_p
        condition for generating REG_FRAME_RELATED_EXPR note.
        (pop): Add code for generating REG_CFA_RESTORE,
        REG_CFA_ADJUST_CFA notes. Set RTX_FRAME_RELATED_P to 1.
        (sh_expand_epilogue): Use frame_insn() for FP to SP move.
        Set 'frame_p' of calls to output_stack_adjust() to 'true'.

2012-06-11  Richard Henderson  <rth@redhat.com>

        * config/alpha/alpha.c (HWI_HEX2): Add missing shift.
        * vmsdbgout.c (VMS_EPOCH_OFFSET): Add LL suffix.

        * config/alpha/alpha.c (alpha_trampoline_init): Split large constants.

2012-06-12  Hans-Peter Nilsson  <hp@axis.com>

        * doc/tm.texi.in (Addressing Modes) <TARGET_LEGITIMIZE_ADDRESS>:
        Mention that this hook needs to be defined for native TLS.
        * doc/tm.texi: Regenerate.

2012-06-11  Mike Stump  <mikestump@comcast.net>

        * emit-rtl.c (init_emit_once): Iterate through the
        MODE_PARTIAL_INT modes with MIN_MODE_PARTIAL_INT and
        MAX_MODE_PARTIAL_INT, as GET_MODE_WIDER_MODE doesn't step through
        all the MIN_MODE_PARTIAL_INT modes anymore.

2012-06-12  Maxim Kuvyrkov  <maxim@codesourcery.com>

        * config/mips/mips-tables.opt (xlp): Fix merge typo.

2012-06-11  Roland McGrath  <mcgrathr@google.com>

        * dwarf2out.c (const_ok_for_output_1): Detect a TLS UNSPEC using
        SYMBOL_REF_TLS_MODEL rather than DECL_THREAD_LOCAL_P, in case it's
        not a VAR_DECL.  Also don't limit it to UNSPECs with exactly one
        operand.

2012-06-11  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/53511
        * config/sh/sh.md (fmasf4): New expander.
        (*macsf3): Rename to fmasf4_i.  Adapt to fma pattern.
        (mac_media): Rename to fmasf4_media.  Adapt to fma pattern.
        * config/sh/sh.opt (mfused-madd): Remove.
        * config/sh/sh.c (sh_option_override): Remove mfused-madd handling.
        (builtin_description bdesc): Remove __builtin_sh_media_FMAC_S.
        * config.gcc (sh[123456789lbe]*-*-* | sh-*-*): Add fused-madd.opt
        as extra options.
        * doc/invoke.texi (SH Options): Update mfused-madd and mno-fused-madd
        descriptions.

2012-06-11  Richard Henderson  <rth@redhat.com>

        * dwarf2cfi.c (scan_trace): Handle annulled branch-taken delay slots.

2012-06-11  Richard Guenther  <rguenther@suse.de>

        PR middle-end/53470
        * tree.c (free_lang_data_in_type): Do not clear TYPE_CONTEXT but
        replace it with the first non-BLOCK context.

2012-06-11  Richard Guenther  <rguenther@suse.de>

        * alias.c (aliases_everything_p): Remove.
        (DIFFERENT_ALIAS_SETS_P): Likewise.
        (true_dependence_1): Use mems_in_disjoint_alias_sets_p directly.
        Do not use aliases_everything_p or special-case ANDs.  Do not
        special-case BLKmode moves.
        (may_alias_p): Likewise.  Handle BLKmode similar like everywhere
        - for SCATCH only.

2012-06-09  Hans-Peter Nilsson  <hp@axis.com>

        Fix CRIS build errors with --enable-build-with-cxx.
        * config/cris/cris.c (cris_emit_trap_for_misalignment): Rename
        variable "and" to "andop".
        * config/cris/sync.md ("atomic_fetch_<atomic_op_name><mode>"): Use
        temporary variable for memory model, passing C++-type-correct
        parameter type to expand_mem_thread_fence.
        ("atomic_compare_and_swap<mode>"): Ditto.

2012-06-09  Richard Henderson  <rth@redhat.com>

        PR c++/53602
        * cfgcleanup.c (execute_jump): Rename from rest_of_handle_jump2.
        (pass_jump): Rename from pass_jump2.
        (execute_jump2, pass_jump2): New.
        * combine-stack-adj.c (rest_of_handle_stack_adjustments): Don't
        perform cfg cleanup here.  Move the test of PUSH_ROUNDING
        and ACCUMULATE_OUTGOING_ARGS test...
        (gate_handle_stack_adjustments): ... here.
        * passes.c (init_optimization_passes): Update for pass_jump2 rename.
        Place new pass_jump2 after pass_stack_adjustments.
        * tree-pass.h (pass_jump): Declare.

2012-06-09  Kenneth Zadeck <zadeck@naturalbridge.com>

        * simplify-rtx.c (simplify_const_binary_operation): Fixed shift
        count trucation.

2012-06-08  Richard Henderson  <rth@redhat.com>

        PR c++/53602
        * combine-stack-adj.c (force_move_args_size_note): Add ARGS_SIZE
        note to a clobber insn when no other insn is available.

2012-06-08  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.c (avr_case_values_threshold): Return 7.

2012-06-07  Andreas Schwab  <schwab@linux-m68k.org>

        * genhooks.c (main): Set progname.
        (emit_documentation): Remove variable found_start, always bail out
        when a place is missing.
        * doc/tm.texi.in (C++ ABI): Add @hook TARGET_CXX_DECL_MANGLING_CONTEXT.

2012-06-07  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/53580
        * omp-low.c (scan_omp): Change first argument to gimple_seq *,
        call walk_gimple_seq_mod instead of walk_gimple_seq.
        (scan_sharing_clauses, scan_omp_parallel, scan_omp_task,
        scan_omp_for, scan_omp_sections, scan_omp_single,
        execute_lower_omp): Adjust callers.
        (scan_omp_1_stmt): Likewise.  If check_omp_nesting_restrictions
        returns false, replace stmt with GIMPLE_NOP.
        (check_omp_nesting_restrictions): Instead of issuing warnings,
        issue errors and return false if any errors were reported.

2012-06-06  Steven Bosscher  <steven@gcc.gnu.org>

        * doc/invoke.texi (fconserve-space): Remove documentation.

2012-06-06  Edmar Wienskoski  <edmar@freescale.com>

        * config/rs6000/rs6000-tables.opt: Regenerated.

2012-06-06  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53081
        * tree-data-ref.h (adjacent_store_dr_p): Rename to ...
        (adjacent_dr_p): ... this and make it work for reads, too.
        * tree-loop-distribution.c (enum partition_kind): Add PKIND_MEMCPY.
        (struct partition_s): Change main_stmt to main_dr, add
        secondary_dr member.
        (build_size_arg_loc): Change to date data-reference and not
        gimplify here.
        (build_addr_arg_loc): New function split out from ...
        (generate_memset_builtin): ... here.  Use it and simplify.
        (generate_memcpy_builtin): New function.
        (generate_code_for_partition): Adjust.
        (classify_partition): Streamline pattern detection.  Detect memcpy.
        (ldist_gen): Adjust.
        (tree_loop_distribution): Adjust seed statements for memcpy
        recognition.

2012-06-06  Matt Turner  <mattst88@gmail.com>

        * config/arm/mmintrin.h (_mm_empty): New.
        (_m_empty): New.

2012-06-06  Richard Sandiford  <r.sandiford@uk.ibm.com>

        * doc/invoke.texi (sched-pressure-algorithm): Document new --param.
        * common.opt (fsched-pressure-algorithm=): Remove.
        * flag-types.h (sched_pressure_algorithm): Move to...
        * sched-int.h (sched_pressure_algorithm): ...here.
        * params.def (sched-pressure-algorithm): New param.
        * haifa-sched.c (sched_init): Use it to initialize sched_pressure.
        * common/config/s390/s390-common.c (s390_option_optimization_table):
        Remove OPT_fsched_pressure_algorithm_ entry.
        * config/s390/s390.c (s390_option_override): Set a default value for
        PARAM_SCHED_PRESSURE_ALGORITHM.

2012-06-05  Michael Meissner  <meissner@linux.vnet.ibm.com>

        PR target/53487
        * config/rs6000/rs6000.c (rs6000_generate_compare): If we are
        doing an unsigned compare, make sure the second argument is not a
        negative constant.
        (rs6000_emit_cmove): Don't allow floating point comparisons when
        generating ISEL moves.

2012-06-05  Edmar Wienskoski  <edmar@freescale.com>

        * config/rs6000/e5500.md: New file.
        * config/rs6000/e6500.md: New file.
        * config/rs6000/rs6000.c (processor_costs): Add new costs for
        e5500 and e6500.
        (rs6000_option_override_internal): Altivec and Spe options not
        allowed with e5500. Spe options not allowed with e6500. Increase
        move inline limit for e5500 and e6500. Disable string instructions
        for e5500 and e6500. Enable branch targets alignment for e5500 and
        e6500. Initialize rs6000_cost for e5500 and e6500.
        (rs6000_adjust_cost): Add extra scheduling cycles between compare
        and brnach for e5500 and e6500.
        (rs6000_issue_rate): Set issue rate for e5500 and e6500.
        * config/rs6000/rs6000-cpus.def: Add cpu definitions for e5500 and
        e6500.
        * config/rs6000/rs6000.h (ASM_CPU_SPEC): Add e5500 and e6500.
        * config/rs6000/rs6000.md (define_attr "cpu"): Add ppce5500 and
        ppce6500.
        Include e5500.md and e6500.md.
        * config/rs6000/rs6000-opt.h (processor_type): Add
        PROCESSOR_PPCE5500 and PROCESSOR_PPCE6500.
        * config.gcc (cpu_is_64bit): Add new cores e5500, e6500.
        (powerpc*-*-*): Add new cores e5500, e6500.
        * doc/invoke.texi: (item -mcpu): Add e5500 and e6500 to list of cpus.

2012-06-05  Richard Guenther  <rguenther@suse.de>

        * tree-vect-data-refs.c (vect_analyze_data_refs): Fix last change.

2012-06-05  H.J. Lu  <hongjiu.lu@intel.com>

        PR target/53575
        * config.gcc: Select x32 run-time library if --with-abi={x32|mx32}
        is used for x86_64-*-*.

2012-06-05  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/30442
        * tree-vect-data-refs.c (vect_analyze_data_refs): For basic-block
        vectorization stop analysis at the first stmt we cannot compute
        a data-reference for instead of giving up completely.

2012-06-05  Richard Guenther  <rguenther@suse.de>

        * tree-loop-distribution.c (struct partition_s): Add has_writes member.
        (partition_alloc): Initialize it.
        (partition_has_writes): New function.
        (rdg_flag_uses): Adjust.
        (rdg_flag_vertex): Likewise.
        (rdg_flag_vertex_and_dependent): Likewise.
        (rdg_flag_loop_exits): Likewise.
        (build_rdg_partition_for_component): Likewise.
        (rdg_build_partitions): Likewise.

2012-06-05  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53081
        * tree-loop-distribution.c (generate_memset_builtin): Handle all
        kinds of byte-sized stores.
        (classify_partition): Likewise.
        (tree_loop_distribution): Adjust seed statements used for
        !flag_tree_loop_distribution.

2012-06-05  Alan Modra  <amodra@gmail.com>

        * config/rs6000/rs6000.c (ptr_regno_for_savres): Comment.
        (rs6000_emit_prologue): Ensure register used for inline saves
        of vector regs is not the static chain register.  Revise comment.

2012-06-04  Oleg Endo  <olegendo@gcc.gnu.org>

        * doc/md.texi (Standard Pattern Names For Generation): Document
        sincos pattern.

2012-06-04  H.J. Lu  <hongjiu.lu@intel.com>

        PR bootstrap/53555
        * config/i386/i386.c (ix86_sched_reorder) Skip debug insns.

2012-06-04  Jason Merrill  <jason@redhat.com>

        * dwarf2out.c (is_unit_die): New.
        (copy_declaration_context, copy_ancestor_tree): Use it.
        (copy_decls_walk): Likewise.

2012-06-04  Paolo Carlini  <paolo.carlini@oracle.com>

        PR c++/53524
        * doc/invoke.texi (Wenum-compare): Update documentation.

2012-06-04  Dodji Seketeli  <dodji@redhat.com>

        PR preprocessor/53463
        * parser.c (cp_parser_assignment_expression): Use the location
        for the '=' as the default location for the expression.

2012-06-04  Edmar Wienskoski  <edmar@freescale.com>

        PR target/53559
        * config/rs6000/altivec.md (altivec_stvlx): Change machine mode of
        operands.
        (altivec_stvlxl): Ditto.
        (altivec_stvrx): Ditto.
        (altivec_stvrxl): Ditto.

2012-06-04  Vladimir Makarov  <vmakarov@redhat.com>

        * ira-int.h (struct target_ira_int): Add member x_ira_uniform_class_p.
        (ira_uniform_class_p): New macro.

        * ira.c (setup_uniform_class_p): New function.
        (setup_allocno_and_important_classes): Call the function.
        (print_unform_and_important_classes): New function.
        (print_classes): Rename to print_translated_classes.
        (ira_debug_allocno_classes): Add call of
        print_unform_and_important_classes.

        * ira-costs.c (setup_regno_cost_classes_by_aclass): Use uniform
        classes instead of pressure classes.

2012-06-04  Aldy Hernandez  <aldyh@redhat.com>

        PR middle-end/47530
        * trans-mem.c (expand_block_edges): Do not skip the first
        statement when resetting the BB.

2012-06-04  Richard Guenther  <rguenther@suse.de>

        * tree-data-ref.c (stores_from_loop): Remove.
        (stmt_with_adjacent_zero_store_dr_p): Likewise.
        (stores_zero_from_loop): Likewise.
        * tree-data-ref.h (stores_from_loop, stores_zero_from_loop,
        stmt_with_adjacent_zero_store_dr_p, stride_of_unit_type_p): Remove.
        (adjacent_store_dr_p): New function.
        * tree-loop-distribution.c (generate_memset_builtin): Pass
        the RDG, use the already available data-reference.
        (generate_code_for_partition): Pass down RDG.
        (classify_partition): Inline parts of the former
        stmt_with_adjacent_zero_store_dr_p here and use adjacent_store_dr_p.
        (ldist_gen): Remember if there was any detected builtin and
        do less work if not and flag_tree_loop_distribution is not set.
        (tree_loop_distribution): Inline and fuse stores_from_loop
        and stores_zero_from_loop here.

2012-06-04  Richard Guenther  <rguenther@suse.de>

        PR middle-end/53471
        * dwarf2out.c (dwarf2out_finish): If generating LTO do not
        create new assembler names.

2012-06-04  Richard Guenther  <rguenther@suse.de>

        * tree-data-ref.c (struct rdg_vertex_info): Remove.
        (rdg_vertex_for_stmt): Simplify using gimple_uid.
        (create_rdg_vertices): Pass loop argument, remove stmt to RDG index
        hashtable.  Record stmt data-references.
        (hash_stmt_vertex_info): Remove.
        (eq_stmt_vertex_info): Likewise.
        (hash_stmt_vertex_del): Likewise.
        (build_empty_rdg): Simplify.
        (build_rdg): Adjust.
        (free_rdg): Likewise.
        (ref_base_address): Remove.
        (have_similar_memory_accesses): Likewise.
        * tree-data-ref.h (create_rdg_vertices): Remove.
        (struct rdg_vertex): Add datarefs member.
        (RDGV_DATAREFS): New define.
        (RDG_DATAREFS): Likewise.
        (have_similar_memory_accesses): Remove.
        (rdg_has_similar_memory_accesses): Likewise.
        * tree-loop-distribution.c (ref_base_address): Re-implement here.
        (similar_memory_accesses): Re-implement using existing data-references.
        (tree_loop_distribution): Initialize stmt uids for the stmt to
        RDG index mapping.
        * tree-vect-loop.c (vect_create_epilog_for_reduction): Only
        access stmt vinfo for stmts in loop.

2012-06-04  Andreas Schwab  <schwab@linux-m68k.org>

        PR target/53461
        * config/m68k/m68k.md ("tablejump"): Fix check for
        CASE_VECTOR_PC_RELATIVE.

2012-06-04  Steven Bosscher  <steven@gcc.gnu.org>

        * output.h (merge_weak, assemble_alias,
        initializer_constant_valid_p,
        initializer_constant_valid_for_bitfield_p): Move protos from here...
        * tree.h: ... to here.
        * cgraphclones.c: Do not include output.h.
        * gimplify.c: Likewise.
        * reload.c: Likewise.
        * recog.c: Likewise.
        * tree-ssa-loop-ivopts.c: Likewise.
        * tree-switch-conversion.c: Likewise.
        * c-parser.c: Likewise.
        * c-typeck.c: Likewise.
        * Makefile.in: Fix dependencies.

2012-06-04  Georg-Johann Lay  <avr@gjlay.de>

        PR target/46261
        * config/avr/avr-stdint.h: New file.
        * config.gcc (avr-*-*,tm_file): Use avr/avr-stdint.h instead of
        newlib-stdint.h

2012-06-04  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/53550
        * tree-ssa-loop-niter.c (number_of_iterations_cond): If type
        is POINTER_TYPE_P, use sizetype as step type instead of type.

2012-06-04  Richard Guenther  <rguenther@suse.de>

        * tree-data-ref.c (have_similar_memory_accesses_1): Remove.
        (ref_base_address_1): Likewise.
        (remove_similar_memory_refs): Likewise.
        * tree-data-ref.h (remove_similar_memory_refs): Remove.
        * tree-loop-distribution.c (classify_partition): Do not classify
        as builtin if -ftree-loop-distribute-patterns is not enabled.
        (fuse_partitions_with_similar_memory_accesses): Inline ...
        (ldist_gen): ... here.  Fuse all non-builtin partitions if
        -ftree-loop-distribution is not enabled.  Properly return
        the number of created partitions.  Do not update SSA form here but ...
        (tree_loop_distribution): ... once here for the whole function.
        Only walk innermost loops, constrain loops we consider here
        further.  Do not call remove_similar_memory_refs.
        (distribute_loop): Do not check number of loop nodes here.

2012-06-04  Steven Bosscher  <steven@gcc.gnu.org>

        * Makefile.in (GIMPLE_H): Do not depend on TARGET_H.

2012-06-03  Martin Jambor  <mjambor@suse.cz>

        * ipa-prop.h (ipa_get_jf_known_type_offset): New function.
        (ipa_get_jf_known_type_base_type): Likewise.
        (ipa_get_jf_known_type_component_type): Likewise.
        (ipa_get_jf_constant): Likewise.
        (ipa_get_jf_pass_through_formal_id): Likewise.
        (ipa_get_jf_pass_through_operation): Likewise.
        (ipa_get_jf_ancestor_offset): Likewise.
        (ipa_get_jf_ancestor_type): Likewise.
        (ipa_get_jf_ancestor_formal_id): Likewise.
        (ipa_get_jf_member_ptr_pfn): Likewise.
        * ipa-prop.c (ipa_set_jf_known_type): New function.
        (ipa_set_jf_constant): Likewise.
        (ipa_set_jf_simple_pass_through): Likewise.
        (ipa_set_jf_arith_pass_through): Likewise.
        (ipa_set_ancestor_jf): Likewise.
        (fill_member_ptr_cst_jump_function): Moved up and renamed to
        ipa_set_jf_member_ptr_cst.
        (detect_type_change_1): Use the new jump function creation functions.
        (compute_complex_assign_jump_func): Likewise.
        (compute_complex_ancestor_jump_func): Likewise.
        (compute_known_type_jump_func): Likewise.
        (compute_scalar_jump_functions): Likewise.
        (compute_pass_through_member_ptrs): Likewise.
        (determine_cst_member_ptr): Likewise.
        (combine_known_type_and_ancestor_jfs): Likewise.
        (try_make_edge_direct_simple_call): Likewise.
        (try_make_edge_direct_virtual_call): Likewise.
        (update_indirect_edges_after_inlining): Likewise.
        * ipa-cp.c (ipa_get_jf_pass_through_result): Use jump function
        access functions.  Incorporat NOP_EXPR and BINFO handling from its
        callers.
        (ipa_get_jf_ancestor_result): Likewise.  Incorporate handling BINFOs
        which was in its callers.
        (ipa_value_from_jfunc): Use jump function access functions.  Some
        functionality moved to functions above.
        (propagate_vals_accross_ancestor): Likewise.
        (propagate_vals_accross_pass_through): Use jump function access
        functions.
        (propagate_accross_jump_function): Likewise.
        * ipa-inline-analysis.c (remap_edge_change_prob): Use jump function
        access functions.
        (inline_merge_summary): Likewise.

2012-06-03  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        * config/pa/pa.h (MAX_PCREL17F_OFFSET): Define.
        * config/pa/pa.c (pa_attr_length_millicode_call): Use
        MAX_PCREL17F_OFFSET instead of fixed offset.
        (pa_attr_length_call): Likewise.
        (pa_attr_length_indirect_call): Likewise.

2012-06-03  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/53512
        * config/sh/sh.opt (mfsca, mfsrra): New options.
        * config/sh/sh.md (rsqrtsf2): Use TARGET_FPU_ANY and TARGET_FSRRA
        condition.
        (fsca): Use TARGET_FPU_ANY and TARGET_FSCA condition.
        (sinssf2, cossf2): Fold expanders to ...
        (sincossf3): ... this new expander.  Use TARGET_FPU_ANY and
        TARGET_FSCA condition.
        * config/sh/sh.c (sh_option_override): Handle TARGET_FSRRA and
        TARGET_FSCA.
        * doc/invoke.texi (SH Options): Add descriptions for -mfsca,
        -mno-fsca, -mfsrra, -mno-fsrra.

2012-06-03  Matt Turner  <mattst88@gmail.com>

        * config/mips/4600.md (r4700_imul_si): New.
        (r4700_imul_di): New.
        (r4700_fmul_single): New.
        (r4700_fmul_double): New.
        * config/mips/mips-cpus.def: Add r4700.
        * config/mips/mips.c: Likewise.
        * config/mips/mips.md: Likewise.
        * config/mips/mips-tables.opt: Regenerate.

2012-06-02  Steven Bosscher  <steven@gcc.gnu.org>

        * config/sparc/sparc.h (INITIAL_ELIMINATION_OFFSET): Split out to
        new function sparc_initial_elimination_offset.
        * config/sparc/sparc.c (sparc_initial_elimination_offset): New
        function.
        * config/sparc/sparc-protos.h (sparc_initial_elimination_offset):
        Prototype it.

2012-06-02  Kenneth Zadeck <zadeck@naturalbridge.com>

        * expmed.c (expand_mult, choose_multiplier): Change
        "2 * HOST_BITS_PER_WIDE_INT" to "HOST_BITS_PER_DOUBLE_INT".
        * expr.c (convert_modes): Likewise.
        * explow.c (plus_constant): Likewise.
        * fixed-value.c (fixed_saturate1, fixed_saturate2)
        (do_fixed_add, do_fixed_multiply, do_fixed_multiply)
        (do_fixed_multiply, do_fixed_multiply, do_fixed_divide)
        (do_fixed_divide, do_fixed_divide, do_fixed_divide)
        (do_fixed_divide, do_fixed_divide, do_fixed_shift, do_fixed_shift)
        (do_fixed_shift, fixed_convert, fixed_convert)
        (fixed_convert_from_int, fixed_convert_from_int)
        (fixed_convert_from_real): Likewise.
        * fold-const.c (fold_convert_const_int_from_fixed, sign_bit_p)
        (native_interpret_int, fold_binary_loc, fold_ternary_loc): Likewise.
        * varasm.c (output_constructor_bitfield): Likewise.
        * tree-vrp.c (register_edge_assert_for_2): Likewise.
        * double-int.c (rshift_double, lshift_double): Likewise.
        * double-int.h (double_int_fits_in_uhwi_p, double_int, double_int):
        Likewise.
        * simplify-rtx.c (mode_signbit_p)
        (simplify_const_unary_operation, simplify_binary_operation_1)
        (simplify_immed_subreg): Likewise.
        * builtins.c (c_readstr, fold_builtin_bitop): Likewise.
        * tree-vect-generic.c (build_replicated_const): Likewise.
        * dbxout.c (stabstr_O): Likewise.
        * emit-rtl.c (immed_double_int_const, immed_double_const)
        (gen_lowpart_common, init_emit_once): Likewise.
        * tree.c (integer_pow2p, tree_log2, tree_floor_log2)
        (widest_int_cst_value, upper_bound_in_type): Likewise.
        * stor-layout.c (initialize_sizetypes, fixup_signed_type)
        (fixup_unsigned_type): Likewise.
        * real.c (real_to_integer2, real_from_integer): Likewise.
        * dwarf2out.c (size_of_loc_descr, size_of_die, output_die)
        (clz_loc_descriptor, mem_loc_descriptor): Likewise.

2012-06-01  Eric Botcazou  <ebotcazou@adacore.com>

        PR middle-end/53501
        * fold-const.c (fold_binary_loc): Refine previous change.

2012-06-01  Olivier Hainque  <hainque@adacore.com>

        * config/rs6000/vxworks.h (SUBSUBTARGET_OVERRIDE_OPTIONS): Restore
        the "do {" part of the do-while(0) loop.

2012-06-01  Yuri Rumyantsev  <yuri.s.rumyantsev@intel.com>

        * config/i386/i386.c (x86_sched_reorder): New function.
        Added new function x86_sched_reorder.

2012-06-01  Richard Guenther  <rguenther@suse.de>

        * tree-loop-distribution.c (stmt_has_scalar_dependences_outside_loop):
        Handle PHIs.
        (classify_partition): Likewise.

2012-06-01  Richard Guenther  <rguenther@suse.de>

        * tree-loop-distribution.c (enum partition_kind): New enum.
        (struct partition_s): Add kind and main_stmt members.
        (partition_alloc): Initialize kind to PKIND_NORMAL.
        (partition_builtin_p): New function.
        (copy_loop_before): Remove failure path and assert instead.
        (generate_loops_for_partition): Likewise.
        (generate_memset_zero): Fold into ...
        (generate_memset_builtin): ... this.
        (classify_partition): New function with code from
        can_generate_builtin and generate_builtin.
        (generate_builtin): Remove.
        (can_generate_builtin): Likewise.
        (fuse_partitions_with_similar_memory_accesses): Call
        partition_builtin_p instead of can_generate_builtin.
        (rdg_build_partitions): Do not call
        fuse_partitions_with_similar_memory_accesses here...
        (ldist_gen): ... but here after classifying all partitions.
        Remove failure path of generate_code_for_partition.
        (generate_code_for_partition): Generate code according
        to partition classification.

2012-06-01  Manuel López-Ibáñez  <manu@gcc.gnu.org>
            Jonathan Wakely  <jwakely.gcc@gmail.com>

        PR c++/50134
        * doc/invoke.texi (Warning Options): Explain purpose and differences
        between -Wmissing-prototypes and -Wmissing-declarations.

2012-06-01  Christian Bruel  <christian.bruel@st.com>

        * gcc.c (save_switch): Add user_p parameter.
        (read_specs): Likewise.
        (set_specs): Likewise.
        (validate_switches): Likewise.
        (validate_switches_from_spec): Likewise.
        (validate_all_switches): Pass on user_p parameter.
        (struct spec_list): Add user_p field.
        (struct switchstr): Add known field.
        (save_switch): Add known parameter.
        (INIT_STATIC_SPEC): Initialize user_p;
        (driver_unknown_option_callbac): call save_switch if
        OPT_SPECIAL_unknown.
        (driver_handle_option): Propagate OPT_specs.
        (do_spec_1): Set validated only if known.
        (check_live_switch): Likewise.
        (validate_switches): Set validated if known or user_spec.

2012-06-01  Hans-Peter Nilsson  <hp@axis.com>

        Add CRIS atomic patterns for 1, 2, and 4 bytes.
        * config/cris/cris.c (cris_emit_trap_for_misalignment): New function.
        * config/cris/cris-protos.h: Declare it.
        * config/cris/cris.h [!TARGET_DEFAULT, TARGET_CPU_DEFAULT == 32]
        (TARGET_DEFAULT): Add alignment by 32.
        [!TARGET_DEFAULT, TARGET_CPU_DEFAULT == 10] (TARGET_DEFAULT): New
        case, as TARGET_CPU_DEFAULT == 0 but with alignment as for
        TARGET_CPU_DEFAULT == 32.
        (TARGET_TRAP_UNALIGNED_ATOMIC): New macro.
        * config/cris/cris.md: Include sync.md.  Avoid allocating specific
        numbers by replacing the define_constants for all UNSPECs with the
        equivalent define_c_enum construct.
        * config/cris/cris.opt (mtrap-unaligned-atomic): New option.
        * config/cris/sync.md: New file.

2012-05-31  Matt Turner  <mattst88@gmail.com>

        * config/mips/4600.md (r4600_imul_si): Rename from r4600_imul.
        (r4600_imul_di): New.
        (r4600_idiv_si): Rename from r4600_idiv.
        (r4600_idiv_di): New.

2012-05-31  Steven Bosscher  <steven@gcc.gnu.org>

        * output.h (__gcc_host_wide_int__): Move to hwint.h.
        (decl_default_tls_model): Move to tree.h
        (dump_file): Move to system.h.
        (default_stabs_asm_out_destructor, default_stabs_asm_out_constructor,
        dbxout_int, dbxout_stabd, dbxout_begin_stabn, dbxout_begin_stabn_sline,
        dbxout_begin_empty_stabs, dbxout_begin_simple_stabs,
        dbxout_begin_simple_stabs_desc, dbxout_stab_value_zero,
        dbxout_stab_value_zero, dbxout_stab_value_label_diff,
        dbxout_stab_value_internal_label,
        dbxout_stab_value_internal_label_diff): Move from here ...
        * dbxout.h: ... to here.
        * system.h (dump_file): Moved here from output.h.
        * hwint.h (__gcc_host_wide_int__): Moved here from output.h.
        * tree.h (decl_default_tls_model): Moved here from output.h.
        * varasm.c (default_stabs_asm_out_destructor,
        default_stabs_asm_out_constructor): Move from here ...
        * dbxout.c: ... to here.

        * gcov-dump.c (dump_file): Rename to dump_gcov_file.  Update callers.

        * collect2.h (dump_file): Rename to dump_ld_file.
        * collect2.c: Likewise.
        * tlink.c: Likewise.

        * alias.c: Do not include output.h.
        * auto-inc-dec.c: Likewise.
        * bt-load.c: Likewise.
        * caller-save.c: Likewise.
        * cfg.c: Likewise.
        * cfgbuild.c: Likewise.
        * cfgcleanup.c: Likewise.
        * cfglayout.c: Likewise.
        * cfgloop.c: Likewise.
        * cfgloopanal.c: Likewise.
        * cfgloopmanip.c: Likewise.
        * cfgrtl.c: Likewise.
        * cgraph.c: Likewise.
        * cgraphclones.c: Likewise.
        * combine-stack-adj.c: Likewise.
        * combine.c: Likewise.
        * cprop.c: Likewise.
        * cse.c: Likewise.
        * cselib.c: Likewise.
        * dbgcnt.c: Likewise.
        * df-problems.c: Likewise.
        * df-scan.c: Likewise.
        * dojump.c: Likewise.
        * fwprop.c: Likewise.
        * gcse.c: Likewise.
        * graph.c: Likewise.
        * haifa-sched.c: Likewise.
        * hw-doloop.c: Likewise.
        * ipa-inline-transform.c: Likewise.
        * ipa-pure-const.c: Likewise.
        * ipa-reference.c: Likewise.
        * ipa-utils.c: Likewise.
        * ira-build.c: Likewise.
        * ira-emit.c: Likewise.
        * lcm.c: Likewise.
        * loop-doloop.c: Likewise.
        * loop-invariant.c: Likewise.
        * loop-iv.c: Likewise.
        * loop-unroll.c: Likewise.
        * loop-unswitch.c: Likewise.
        * lto-cgraph.c: Likewise.
        * lto-section-in.c: Likewise.
        * lto-streamer-in.c: Likewise.
        * mcf.c: Likewise.
        * mode-switching.c: Likewise.
        * postreload-gcse.c: Likewise.
        * postreload.c: Likewise.
        * predict.c: Likewise.
        * profile.c: Likewise.
        * ree.c: Likewise.
        * reg-stack.c: Likewise.
        * regcprop.c: Likewise.
        * regmove.c: Likewise.
        * regstat.c: Likewise.
        * reload1.c: Likewise.
        * sched-ebb.c: Likewise.
        * sel-sched-dump.c: Likewise.
        * simplify-rtx.c: Likewise.
        * stor-layout.c: Likewise.
        * store-motion.c: Likewise.
        * tracer.c: Likewise.
        * tree-affine.c: Likewise.
        * tree-cfg.c: Likewise.
        * tree-cfgcleanup.c: Likewise.
        * tree-dfa.c: Likewise.
        * tree-into-ssa.c: Likewise.
        * tree-nomudflap.c: Likewise.
        * tree-optimize.c: Likewise.
        * tree-pretty-print.c: Likewise.
        * tree-profile.c: Likewise.
        * tree-ssa-address.c: Likewise.
        * tree-ssa-ccp.c: Likewise.
        * tree-ssa-copy.c: Likewise.
        * tree-ssa-dom.c: Likewise.
        * tree-ssa-loop-ch.c: Likewise.
        * tree-ssa-loop-im.c: Likewise.
        * tree-ssa-loop-manip.c: Likewise.
        * tree-ssa-loop-niter.c: Likewise.
        * tree-ssa-loop-prefetch.c: Likewise.
        * tree-ssa-loop-unswitch.c: Likewise.
        * tree-ssa-loop.c: Likewise.
        * tree-ssa-propagate.c: Likewise.
        * tree-ssa-structalias.c: Likewise.
        * tree-ssa-tail-merge.c: Likewise.
        * tree-ssa-threadedge.c: Likewise.
        * tree-ssa-threadupdate.c: Likewise.
        * tree-ssa-uncprop.c: Likewise.
        * tree-ssa-uninit.c: Likewise.
        * tree-ssa.c: Likewise.
        * value-prof.c: Likewise.
        * var-tracking.c: Likewise.
        * web.c: Likewise.

        * config/m32r/m32r.c: Include dbxout.h.
        * config/pa/pa.c: Likewise.
        * config/rs6000/rs6000.c: Likewise.

        * Makefile.in: Fix dependencies.
        * config/rs6000/t-rs5000: Likewise.

2012-05-31  Aldy Hernandez  <aldyh@redhat.com>

        * tree-ssa-loop-im.c (execute_sm): Do not check flag_tm.
        * gimple.h (block_in_transaction): Check for flag_tm.

2012-05-31  Aldy Hernandez  <aldyh@redhat.com>

        PR tree-optimization/52558
        * cfg.c (alloc_aux_for_edge): Fix comment.
        (alloc_aux_for_edge): Remove static.
        * basic-block.h (alloc_aux_for_edge): Protoize.
        * tree-ssa-loop-im.c (execute_sm_if_changed): New.
        (execute_sm_if_changed_flag): New.
        (execute_sm_if_changed_flag_set): New.
        (execute_sm): Do not generate data races unless requested.
        (tree_ssa_lim_initialize): Call alloc_aux_for_edges.
        (tree_ssa_lim_finalize): Call free_aux_for_edges.
        * gimple.h (block_in_transaction): New.
        (gimple_in_transaction): Use block_in_transaction.

2012-05-31  Georg-Johann Lay  <avr@gjlay.de>

        PR target/51345
        * config/avr/avr.opt (-msp8): Document it.
        * doc/invoke.texi (AVR Options): Ditto.  And document related
        built-in macros.

2012-05-31  Diego Novillo  <dnovillo@google.com>

        * configure.ac (CXX_FOR_BUILD): Define and substitute.
        (BUILD_CXXFLAGS): Define and substitute.
        * Makefile.in (BUILD_CXXFLAGS): Define.
        (CXX_FOR_BUILD): Define.
        (COMPILER_FOR_BUILD): Set to CXX_FOR_BUILD if building with C++.
        (LINKER_FOR_BUILD): Likewise.
        (BUILD_COMPILERFLAGS): Set to BUILD_CXXFLAGS if building with C++.
        (BUILD_LINKERFLAGS): Likewise.
        * configure: Regenerate.

2012-05-31  Steven Bosscher  <steven@gcc.gnu.org>

        * Makefile.in: Fix many dependencies.
        * tree-profile.c: Don't include regs.h.
        * tree-vectorizer.c: Don't include cfglayout.h.
        * tree-vect-stmts.c: Likewise.
        * tree-vect-slp.c: Likewise.
        * tree-vect-loop.c: Likewise.
        * reg-stack.c: Likewise.
        * tree-ssa-loop-manip.c: Likewise.
        * toplev.c: Likewise.
        * varasm.c: Don't include cfglayout.h, basic-block.h,
        and tree-iterator.h.
        * tree-cfgcleanup.c: Don't include cfglayout.h.
        * passes.c: Don't include cfglayout.h, dwarf2asm.h,
        dwarf2out.h, dbxout.h, sdbout.h, and xcoffout.h.
        * cgraphclones.c: Don't include plugin.h.

2012-05-31  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/t-avr: Correct avr-mmcu.texi dependencies.
        (s-avr-mmcu-texi): Don't sed on gen-avr-mmcu-texi output.
        * doc/avr-mmcu.texi (svn:eol-style): Set to native.

2012-05-31  Richard Guenther  <rguenther@suse.de>

        * tree-loop-distribution.c (struct partition_s): New struct,
        typedef and vector type.
        (partition_alloc, partition_free): New functions.
        (generate_loops_for_partition, generate_builtin,
        generate_code_for_partition, rdg_flag_uses, rdg_flag_vertex,
        rdg_flag_vertex_and_dependent, rdg_flag_loop_exits,
        build_rdg_partition_for_component, can_generate_builtin,
        similar_memory_accesses, fuse_partitions_with_similar_memory_accesses,
        rdg_build_partitions, dump_rdg_partitions, debug_rdg_partitions,
        number_of_rw_in_partition, partition_contains_all_rw,
        ldist_gen): Use partition_t instead of bitmap.

2012-05-31  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/gen-avr-mmcu-texi.c: Sort MCUs.
        * doc/avr-mmcu.texi: Regenerate.

2012-05-31  Richard Guenther  <rguenther@suse.de>

        * tree-loop-distribution.c (stmt_has_scalar_dependences_outside_loop):
        Use FOR_EACH_SSA_DEF_OPERAND.
        (generate_builtin): Adjust.
        (stmt_generated_in_another_partition): Remove.
        (add_scalar_computations_to_partition): Likewise.
        (rdg_build_partitions): Do not call
        add_scalar_computations_to_partition.

2012-05-31  Eric Botcazou  <ebotcazou@adacore.com>

        * tree-dfa.c (get_ref_base_and_extent): Compute the offset using
        double ints throughout.
        * tree-sra.c (build_user_friendly_ref_for_offset) <RECORD_TYPE>:
        Check that the position of the field is representable as an integer.

2012-05-31  Richard Guenther  <rguenther@suse.de>

        * tree-data-ref.c (dr_analyze_innermost): Properly convert
        the MEM_REF offset to sizetype.

2012-05-31  Georg-Johann Lay  <avr@gjlay.de>

        * doc/invoke.texi (AVR Options): Fix typos.

2012-05-31  Hans-Peter Nilsson  <hp@axis.com>

        * config/cris/cris.h (CC1_SPEC): Pass through all -march=
        and -mcpu= options.
        (ASM_SPEC): Ditto, not just -march=v32, but translate non-v10,
        non-v32 into --march=v0_v10.

2012-05-31  Richard Sandiford  <rdsandiford@googlemail.com>

        * ira-int.h (target_ira_int): Rename x_move_cost to
        x_ira_register_move_cost, x_may_move_in_cost to
        x_ira_may_move_in_cost and x_may_move_out_cost to
        x_ira_may_move_out_cost.  Delete the old fields with
        those names and also x_ira_max_register_move_cost,
        x_ira_max_may_move_in_cost and x_ira_max_may_move_out_cost.
        (move_cost, may_move_in_cost, may_move_out_cost)
        (ira_max_register_move_cost, ira_max_may_move_in_cost)
        (ira_max_may_move_out_cost): Delete.
        * ira.c (init_move_cost): Rename to...
        (ira_init_register_move_cost): ...this, deleting the old
        function with that name.  Apply above variable renamings.
        Retain asserts for null fields.
        (ira_init_once): Don't initialize register move costs here.
        (free_register_move_costs): Apply above variable renamings.
        Remove code for deleted fields.

2012-05-31  Richard Sandiford  <rdsandiford@googlemail.com>

        * ira.c (init_move_cost): Adjust choice of subclasses to match
        the current ira_init_register_move_cost choice.  Use
        ira_class_subset_p instead of reg_class_subset_p.
        (ira_init_register_move_cost): Assert that move_cost,
        may_move_in_cost and may_move_out_cost already hold the desired
        values for their ira_* equivalents.  For the latter two,
        ignore classes that can't store a register of the given mode.

2012-05-31  Richard Sandiford  <rdsandiford@googlemail.com>

        * ira.c (setup_allocno_and_important_classes): Use
        ira_class_hard_regs_num to check whether a class has any
        allocatable registers.
        (ira_init_register_move_cost): Likewise.

2012-05-31  Richard Sandiford  <rdsandiford@googlemail.com>

        * ira.c (init_move_cost): Adjust local variable names to match
        file conventions.  Use ira_assert instead of gcc_assert.

2012-05-31  Richard Sandiford  <rdsandiford@googlemail.com>

        * regs.h (move_table, move_cost, may_move_in_cost, may_move_out_cost):
        Move these definitions and associated target_globals fields to...
        * ira-int.h: ...here.
        * rtl.h (init_move_cost): Delete.
        * reginfo.c (last_mode_for_init_move_cost, init_move_cost): Move to...
        * ira.c: ...here, making the latter static.

2012-05-31  Richard Sandiford  <rdsandiford@googlemail.com>

        * ira-costs.c (copy_cost): Use ira_init_register_move_cost_if_necessary
        and ira_register_move_cost instead of init_move_cost and move_cost.

2012-05-31  Richard Sandiford  <rdsandiford@googlemail.com>

        * ira.h (target_ira): Delete x_ira_available_class_regs.
        (ira_available_class_regs): Delete.
        * ira.c (setup_available_class_regs): Delete.
        (setup_alloc_classes): Don't call it.
        (setup_pressure_classes): Use ira_class_hard_regs_num instead of
        ira_available_class_regs.
        * haifa-sched.c (print_curr_reg_pressure, setup_insn_reg_pressure_info)
        (model_spill_cost): Likewise.
        * ira-build.c (low_pressure_loop_node_p): Likewise.
        * ira-color.c (color_pass): Likewise.
        * ira-emit.c (change_loop): Likewise.
        * ira-lives.c (inc_register_pressure, dec_register_pressure)
        (single_reg_class, ira_implicitly_set_insn_hard_regs)
        (process_bb_node_lives): Likewise.
        * loop-invariant.c (gain_for_invariant): Likewise.

2012-05-30  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        PR target/52999
        * config/pa/pa.c (TARGET_SECTION_TYPE_FLAGS): Define.
        (pa_section_type_flags): New.
        (pa_legitimate_constant_p): Revert previous change.

2012-05-30  Steven Bosscher  <steven@gcc.gnu.org>

        * ira.c (allocate_initial_values): Make static.

2012-05-30  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (legitimize_tls_address) <TLS_MODEL_INITIAL_EXEC>:
        Generate tls_initial_exec_64_sun only when !TARGET_X32.

2012-05-30  Richard Guenther  <rguenther@suse.de>

        PR middle-end/53501
        * fold-const.c (fold_binary_loc): Make sure to call
        fold_plusminus_mult_expr with the original sign of operands.

2012-05-30  Steven Bosscher  <steven@gcc.gnu.org>

        * Makefile.in: Fix many dependencies.
        (DWARF2_H): Depend on dwarf2.def.
        (RTL_ERROR_H): Depend on rtl-error.h.
        (TREE_PRETTY_PRINT_H, GIMPLE_PRETTY_PRINT_H): New.  Replace
        all gimple-pretty-print.h and tree-pretty-print.h references.

2012-05-30  Marc Glisse  <marc.glisse@inria.fr>

        * simplify-rtx.c (simplify_binary_operation_1): Optimize shuffle of
        concatenations.

2012-05-30  Richard Guenther  <rguenther@suse.de>

        PR middle-end/53522
        * tree-emutls.c (gen_emutls_addr): Do not add globals to
        referenced-vars.

2012-05-30  Eric Botcazou  <ebotcazou@adacore.com>

        * explow.c (probe_stack_range): Restore simple control flow and stop
        again when the probe cannot be generated if HAVE_check_stack.

2012-05-30  Jakub Jelinek  <jakub@redhat.com>

        PR rtl-optimization/53519
        * combine.c (simplify_shift_const_1) <case NOT>: Use constm1_rtx
        instead of GEN_INT (GET_MODE_MASK (mode)) as second operand of XOR.

2012-05-30  Ramana Radhakrishnan  <ramana.radhakrishnan@linaro.org>

        * config/arm/arm.c (arm_evpc_neon_vrev): Adjust off by one error.

2012-05-29  Jack Howarth  <howarth@bromo.med.uc.edu>

        PR debug/53453
        * doc/tm.texi: Update.
        * doc/tm.texi.in (SDB and DWARF) <TARGET_FORCE_AT_COMP_DIR>: Add @hook.
        * target.def (force_at_comp_dir): New hook.
        * config/darwin.h (TARGET_FORCE_AT_COMP_DIR): Define.
        * dwarf2out.c (dwarf2out_finish): Check targetm.force_at_comp_dir.

2012-05-29  Jack Howarth  <howarth@bromo.med.uc.edu>

        * config/darwin.h (STARTFILE_SPEC): Do not use -lbundle1.o when
        Darwin >= 10.
        (DARWIN_DYLIB1_SPEC): Do not use -ldylib1.10.5.o when Darwin >= 10.
        (DARWIN_CRT1_SPEC): Use -lcrt1.10.6.o when Darwin >= 10.

2012-05-29  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/51340
        * config/sh/sh.c (sh_option_override): Set TARGET_FMAC if
        flag_unsafe_math_optimizations is set.
        * doc/invoke.texi (SH Options): Add -mno-fused-madd description.
        Update description of -mfused-madd.

2012-05-29  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/52941
        * config/sh/predicates.md (atomic_arith_operand,
        atomic_logical_operand): New predicates.
        * config/sh/sh.c (sh_option_override): Check atomic options.
        * config/sh/sh.h (TARGET_ANY_ATOMIC, UNSUPPORTED_ATOMIC_OPTIONS,
        UNSUPPORTED_HARD_ATOMIC_CPU): New macros.
        (DRIVER_SELF_SPECS): Use UNSUPPORTED_ATOMIC_OPTIONS and
        UNSUPPORTED_HARD_ATOMIC_CPU.
        * config/sh/sync.md: Update description comments.
        (I12): New mode iterator.
        (fetchop_predicate, fetchop_constraint): New code attributes.
        (atomic_compare_and_swapsi_hard, atomic_compare_and_swap<mode>_hard,
        atomic_exchangesi_hard, atomic_exchange<mode>_hard,
        atomic_fetch_<fetchop_name>si_hard,
        atomic_fetch_<fetchop_name><mode>_hard,
        atomic_fetch_nandsi_hard, atomic_fetch_nand<mode>_hard,
        atomic_<fetchop_name>_fetchsi_hard,
        atomic_<fetchop_name>_fetch<mode>_hard,
        atomic_nand_fetchsi_hard, atomic_nand_fetch<mode>_hard,
        atomic_test_and_set_hard): New insns.
        (atomic_compare_and_swap<mode>_soft, atomic_exchange<mode>_soft,
        atomic_fetch_<fetchop_name><mode>_soft, atomic_fetch_nand<mode>_soft,
        atomic_<fetchop_name>_fetch<mode>_soft, atomic_nand_fetch<mode>_soft,
        atomic_test_and_set_soft): Use same formatting for the first line of
        the asm block as in new insns above.
        (atomic_compare_and_swap<mode>, atomic_exchange<mode>,
        atomic_fetch_<fetchop_name><mode>, atomic_<fetchop_name>_fetch<mode>,
        atomic_test_and_set): Integrate new *_hard insns into expanders.
        * config/sh/sh.opt (mhard-atomic): New option.
        * doc/invoke.texi (SH Options): Document it.

2012-05-29  Meador Inge  <meadori@codesourcery.com>

        * c-decl.c (c_push_function_context): Always create a new language
        function.
        (c_pop_function_context): Clear the language function created in
        c_push_function_context.

2012-05-29  Matt Turner  <mattst88@gmail.com>

        * config/alpha/ev6.md: (define_bypass "ev6_fmul,ev6_fadd"): New.
        (define_bypass "ev6_fcmov"): New.

2012-05-29  Steven Bosscher  <steven@gcc.gnu.org>

        * integrate.c: Remove.
        * integrate.h: Remove.
        * Makefile.in: Remove make rules for integrate.c and INTEGRATE_H.
        * config/arm/t-arm: Remove INTEGRATE_H dependency for target files.
        * config/rs6000/t-rs6000: Likewise
        * config/spu/t-spu-elf: Likewise.
        * function.h (get_hard_reg_initial_val, has_hard_reg_initial_val,
        get_hard_reg_initial_reg, emit_initial_value_sets): Move prototypes
        from integrate.h to here.
        (initial_value_entry): New prototype.
        * reload.h (allocate_initial_values): Remove prototype.
        * tree.h (set_decl_abstract_flags, set_decl_origin_self): Likewise.
        * cse.c (fixed_base_plus_p): Don't handle virtual registers for
        integrate.c.
        * dwarf2out.c (set_decl_origin_self, set_block_origin_self,
        set_decl_abstract_flags, set_block_abstract_flags): Move from
        integrate.c to here, the only user.
        * expmed.c (extract_fixed_bit_field): Remove outdated comment
        about integrate.c.
        * function.c: Don't include integrate.h.
        (struct initial_value_pair, struct initial_value_struct,
        get_hard_reg_initial_val, has_hard_reg_initial_val,
        get_hard_reg_initial_reg, emit_initial_value_sets): Move from
        integrate.c to here.
        (initial_value_entry): New function.
        * genemit.c (main): Don't print integrate.h include line.
        * ira.c: Don't include integrate.h.
        (allocate_initial_values): Move from integrate.c to here.
        (ira): Update allocate_initial_values call.
        * tree-inline.c: Don't include integrate.h.
        (function_attribute_inlinable_p): Moved from integrate.c to here.
        * cfgexpand.c: Don't include integrate.h.
        * except.c: Likewise.
        * langhooks.c: Likewise.
        * passes.c: Likewise.
        * toplev.c: Likewise.
        * config/frv/frv.c: Likewise.
        * config/pa/pa.c: Likewise.
        * config/spu/spu.c: Likewise.
        * config/epiphany/epiphany.c: Likewise.
        * config/mep/mep.c: Likewise.
        * config/score/score.c: Likewise.
        * config/picochip/picochip.c: Likewise.
        * config/sh/sh.c: Likewise.
        * config/alpha/alpha.c: Likewise.
        * config/microblaze/microblaze.c: Likewise.
        * config/mips/mips.c: Likewise.
        * config/v850/v850.c: Likewise.
        * config/mmix/mmix.c: Likewise.
        * config/bfin/bfin.c: Likewise.
        * config/arm/arm.c: Likewise.
        * config/s390/s390.c: Likewise.
        * config/m32r/m32r.c: Likewise.
        * config/rs6000/rs6000.c: Likewise.
        * config/c6x/c6x.c: Include function.h instead of integrate.h.
        * config/tilegx/tilegx.c: Likewise.
        * config/tilepro/tilepro.c: Likewise.

2012-05-29  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/t-avr (s-avr-mmcu-texi): Call
        gen-avr-mmcu-texi$(build_exeext) via ./ and don't assume . is in PATH.

2012-05-29  Michael Matz  <matz@suse.de>

        * rtl.h (assign_stack_temp, assign_stack_temp_for_type,
        assign_temp): Remove 'keep' argument.
        (mark_temp_addr_taken): Remove prototype.
        * tree.h (expand_decl): Remove prototype.
        * function.c (struct temp_slot): Remove addr_taken and keep member.
        (assign_stack_temp_for_type) Don't initialize above, remove
        keep argument.
        (assign_stack_temp, assign_temp): Remove keep argument.
        (mark_temp_addr_taken): Remove.
        (preserve_temp_slots): Remove handling of addr_taken and keep members.
        (free_temp_slots): Ditto.
        * expr.c (expand_expr_real_1 <COMPOUND_LITERAL_EXPR>): Remove
        dead code.
        * stmt.c (expand_asm_operands): Remove dead code.
        (expand_decl): Remove.
        * c-decl.c (finish_struct): Don't call expand_decl.
        * builtins.c (expand_builtin_cexpi): Adjust calls to assign_temp
        and assign_stack_temp.
        * calls.c (save_fixed_argument_area, initialize_argument_information,
        expand_call, emit_library_call_value_1, store_one_arg): Ditto.
        * expmed.c (extract_bit_field_1): Ditto.
        * expr.c (emit_group_load_1, emit_group_store,
        copy_blkmode_from_reg, emit_push_insn, expand_assignment,
        store_field, expand_constructor, expand_cond_expr_using_cmove,
        expand_expr_real_2, expand_expr_real_1): Ditto.
        * stmt.c (expand_asm_operands, expand_return): Ditto.

        * function.c (pop_temp_slots): Call free_temp_slots.
        * calls.c (store_one_arg): Don't call preserve_temp_slots or
        free_temp_slots.
        * expr.c (expand_assignment): Don't call free_temp_slots.

        * config/arm/arm.c (neon_expand_vector_init): Ditto.
        * config/i386/i386.c (ix86_expand_vector_set): Ditto.
        (ix86_expand_vector_extract): Ditto.
        * config/ia64/ia64.c (spill_xfmode_rfmode_operand,
        ia64_expand_movxf_movrf): Ditto.
        * config/mips/mips.c (mips_expand_vi_general): Ditto.
        * config/mmix/mmix.md (floatdisf2, floatunsdisf2, truncdfsf2,
        extendsfdf2): Ditto.
        * config/rs6000/rs6000.c (rs6000_expand_vector_init,
        rs6000_expand_vector_set, rs6000_expand_vector_extract,
        rs6000_allocate_stack_temp): Ditto.
        * config/rs6000/rs6000.md (fix_trunctfsi2_fprs): Ditto.
        * config/sparc/sparc.c (emit_soft_tfmode_libcall,
        sparc_emit_float_lib_cmp, sparc_emit_float_lib_cmp,
        sparc_expand_vector_init): Ditto.

2012-05-29  Michael Matz  <matz@suse.de>

        * c-tree.h (c_expand_decl): Remove prototype.

        * expr.c (expand_expr_real_1 <normal_inner_ref>): Don't allocate
        a kept temp.
        (expand_expr_real_1 <COMPOUND_LITERAL_EXPR>): Make unreachable.
        * gimple-fold.c (canonicalize_constructor_val): Canonicalize
        COMPOUND_LITERAL_EXPR.
        * function.c (expand_function_start): Don't call expand_decl,
        instead assert that we have RTL assigned.
        * tree-ssa-live.c (remove_unused_locals): Clear
        nonlocal_goto_save_area if its backing variable is removed.
        * stmt.c (expand_asm_operands): Remove handling of non-lvalues
        as mem inputs.
        (expand_decl): Assert that this does nothing.
        * calls.c (expand_call): Don't call mark_temp_addr_taken.

2012-05-29  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53516
        * tree-data-ref.c (stmt_with_adjacent_zero_store_dr_p): Reject
        bitfield accesses.
        * tree-vect-data-refs.c (vect_analyze_data_refs): Likewise.

2012-05-29  Joseph Myers  <joseph@codesourcery.com>

        * LANGUAGES: Fix typos.
        * Makefile.in: Fix typos.
        * alias.c: Fix typos.
        * auto-inc-dec.c: Fix typos.
        * bb-reorder.c: Fix typos.
        * cfgcleanup.c: Fix typos.
        * cgraph.c: Fix typos.
        * cgraph.h: Fix typos.
        * cgraphunit.c: Fix typos.
        * collect2-aix.h: Fix typos.
        * collect2.c: Fix typos.
        * compare-elim.c: Fix typos.
        * config/alpha/vms.h: Fix typos.
        * config/arm/README-interworking: Fix typos.
        * config/arm/arm.c: Fix typos.
        * config/arm/iterators.md: Fix typos.
        * config/arm/vxworks.h: Fix typos.
        * config/avr/avr.c: Fix typos.
        * config/avr/avr.h: Fix typos.
        * config/avr/avr.md: Fix typos.
        * config/avr/builtins.def: Fix typos.
        * config/c6x/c6x.c: Fix typos.
        * config/cr16/cr16.c: Fix typos.
        * config/cr16/cr16.md: Fix typos.
        * config/cris/cris.md: Fix typos.
        * config/darwin.c: Fix typos.
        * config/darwin.opt: Fix typos.
        * config/i386/i386-c.c: Fix typos.
        * config/i386/i386.c: Fix typos.
        * config/ia64/ia64.c: Fix typos.
        * config/m68k/cf.md: Fix typos.
        * config/mep/mep.c: Fix typos.
        * config/microblaze/microblaze.c: Fix typos.
        * config/microblaze/microblaze.h: Fix typos.
        * config/mn10300/mn10300.c: Fix typos.
        * config/mn10300/mn10300.md: Fix typos.
        * config/pa/pa.c: Fix typos.
        * config/picochip/picochip.h: Fix typos.
        * config/rs6000/a2.md: Fix typos.
        * config/rs6000/rs6000.c: Fix typos.
        * config/rs6000/vector.md: Fix typos.
        * config/rx/rx.md: Fix typos.
        * config/rx/rx.opt: Fix typos.
        * config/s390/2097.md: Fix typos.
        * config/s390/s390.c: Fix typos.
        * config/s390/s390.h: Fix typos.
        * config/sh/sh.c: Fix typos.
        * config/sh/sh.md: Fix typos.
        * config/sparc/sync.md: Fix typos.
        * config/spu/spu.c: Fix typos.
        * config/spu/spu.md: Fix typos.
        * config/vms/vms.c: Fix typos.
        * config/vxworks-dummy.h: Fix typos.
        * config/vxworks.h: Fix typos.
        * cselib.c: Fix typos.
        * df-scan.c: Fix typos.
        * df.h: Fix typos.
        * doc/extend.texi: Fix typos.
        * doc/install.texi: Fix typos.
        * doc/invoke.texi: Fix typos.
        * doc/md.texi: Fix typos.
        * doc/plugins.texi: Fix typos.
        * doc/rtl.texi: Fix typos.
        * dse.c: Fix typos.
        * dwarf2asm.c: Fix typos.
        * dwarf2out.c: Fix typos.
        * except.h: Fix typos.
        * expr.c: Fix typos.
        * fold-const.c: Fix typos.
        * gcc.c: Fix typos.
        * gcse.c: Fix typos.
        * genautomata.c: Fix typos.
        * gengtype-state.c: Fix typos.
        * gengtype.c: Fix typos.
        * genhooks.c: Fix typos.
        * gimple-fold.c: Fix typos.
        * gimple-pretty-print.c: Fix typos.
        * gimple.c: Fix typos.
        * gimple.h: Fix typos.
        * gimplify.c: Fix typos.
        * graphite-interchange.c: Fix typos.
        * graphite-sese-to-poly.c: Fix typos.
        * ifcvt.c: Fix typos.
        * input.c: Fix typos.
        * ipa-cp.c: Fix typos.
        * ipa-inline-analysis.c: Fix typos.
        * ipa-inline-transform.c: Fix typos.
        * ipa-inline.c: Fix typos.
        * ipa-pure-const.c: Fix typos.
        * ipa-ref.h: Fix typos.
        * ipa-reference.c: Fix typos.
        * ipa-utils.c: Fix typos.
        * ipa.c: Fix typos.
        * ira-emit.c: Fix typos.
        * ira-lives.c: Fix typos.
        * lto-streamer.c: Fix typos.
        * lto-streamer.h: Fix typos.
        * lto-wrapper.c: Fix typos.
        * mcf.c: Fix typos.
        * mode-switching.c: Fix typos.
        * modulo-sched.c: Fix typos.
        * plugin.c: Fix typos.
        * postreload.c: Fix typos.
        * sched-deps.c: Fix typos.
        * sel-sched-ir.c: Fix typos.
        * sel-sched-ir.h: Fix typos.
        * sel-sched.c: Fix typos.
        * sese.c: Fix typos.
        * stor-layout.c: Fix typos.
        * target-hooks-macros.h: Fix typos.
        * target.def: Fix typos.
        * trans-mem.c: Fix typos.
        * tree-eh.c: Fix typos.
        * tree-predcom.c: Fix typos.
        * tree-sra.c: Fix typos.
        * tree-ssa-address.c: Fix typos.
        * tree-ssa-loop-ivopts.c: Fix typos.
        * tree-ssa-loop-niter.c: Fix typos.
        * tree-ssa-math-opts.c: Fix typos.
        * tree-ssa-pre.c: Fix typos.
        * tree-ssa-propagate.c: Fix typos.
        * tree-ssa-reassoc.c: Fix typos.
        * tree-ssa-sccvn.c: Fix typos.
        * tree-ssa-ter.c: Fix typos.
        * tree-ssa-uninit.c: Fix typos.
        * tree-ssanames.c: Fix typos.
        * tree-vect-generic.c: Fix typos.
        * tree-vect-slp.c: Fix typos.
        * tree.c: Fix typos.
        * tree.h: Fix typos.
        * varasm.c: Fix typos.
        * varpool.c: Fix typos.

2012-05-29  Joseph Myers  <joseph@codesourcery.com>

        * doc/include/texinfo.tex: Update to version 2012-05-16.16.

2012-05-29  Richard Guenther  <rguenther@suse.de>

        * tree-dfa.c (find_vars_r): Do not call add_referenced_vars
        for globals.
        (add_referenced_var_1): Re-organize.  Assert we are not
        called for globals.
        (remove_referenced_var): Likewise.
        * varpool.c (add_new_static_var): Use create_tmp_var_raw.
        * tree-mudflap.c (execute_mudflap_function_ops): Do not
        call add_referenced_var on globals.
        * matrix-reorg.c (transform_access_sites): Likewise.

2012-05-29  Steven Bosscher  <steven@gcc.gnu.org>

        * alias.c (reg_known_value): Make this a VEC.
        (reg_known_equiv_p): Make this an sbitmap.
        (reg_known_value_size): Remove.
        (get_reg_known_value, set_reg_known_value, get_reg_known_equiv_p,
        set_reg_known_equiv_p): Update for reg_known_value and
        reg_known_value_size data structure change.
        (init_alias_analysis, end_alias_analysis): Likewise.

2012-05-29  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/53510
        * input.c (read_line): Use XRESIZEVEC instead of XNEWVEC
        to avoid leaking memory.  No need to handle memory allocation
        failure.  Double string_len on each reallocation instead of adding 2.
        * gcov.c (read_line): Likewise.

2012-05-29  Hans-Peter Nilsson  <hp@axis.com>

        * config/cris/cris.h (TARGET_HAS_BREAK, TARGET_TRAP_USING_BREAK8):
        New macros.
        * config/cris/cris.md ("trap"): Define, enabled for
        TARGET_TRAP_USING_BREAK8.
        * config/cris/cris.opt (mtrap-using-break8): New option.

2012-05-28  Paolo Carlini  <paolo.carlini@oracle.com>

        PR c++/25137
        * doc/invoke.texi: Document -Wmissing-braces not enabled by -Wall
        for C++.

2012-05-28  Hans-Peter Nilsson  <hp@axis.com>

        * doc/md.texi (stack_protect_test): Remove negation of branch to label.
        (Standard Names): Fix typos in documentation of atomic patterns.

2012-05-27  Nathan Sidwell  <nathan@acm.org>

        * tree.c (build_constructor): Propagate TREE_SIDE_EFFECTS.

2012-05-26  Jason Merrill  <jason@redhat.com>

        PR c++/53220
        * c-typeck.c (array_to_pointer_conversion): Give -Wc++-compat warning
        about array compound literals.

2012-05-26  Eric Botcazou  <ebotcazou@adacore.com>

        * cfgcleanup.c (try_optimize_cfg): Do not delete forwarder blocks
        if CLEANUP_NO_INSN_DEL.
        * cfgrtl.c (unique_locus_on_edge_between_p): New function extracted
        from cfg_layout_merge_blocks.
        (emit_nop_for_unique_locus_between): New function.
        (rtl_merge_blocks): Invoke emit_nop_for_unique_locus_between.
        (cfg_layout_merge_blocks): Likewise.

2012-05-26  Dimitrios Apostolou  <jimis@gmx.net>
            Paolo Bonzini  <bonzini@gnu.org>

        * df-scan.c (df_def_record_1): Assert a parallel must contain an
        EXPR_LIST at this point.  Receive the LOC and move its extraction...
        (df_defs_record): ... here. Change if-else to a switch statement.
        (df_find_hard_reg_defs, df_find_hard_reg_defs_1): New.
        (df_get_call_refs): Changed defs_generated from bitmap to HARD_REG_SET
        and compute it from df_find_hard_reg_defs(). Record DF_REF_BASE
        DEFs in REGNO order. Use HARD_REG_SET instead of bitmap for
        regs_invalidated_by_call.
        (df_insn_refs_collect): Record DF_REF_REGULAR DEFs after
        df_get_call_refs().

2012-05-25  Eric Botcazou  <ebotcazou@adacore.com>

        PR lto/52178
        * tree-inline.c (remap_gimple_op_r): Fix handling of FIELD_DECL.
        * tree.c (RETURN_TRUE_IF_VAR): Do not return true for PLACEHOLDER_EXPR.

2012-05-25  Michael Meissner  <meissner@linux.vnet.ibm.com>

        * config/rs6000/t-linux64: Delete the 32-bit multilib that uses
        software floating point emulation.  No longer build the multilibs
        with -mstrict-align.

2012-05-25  Aldy Hernandez  <aldyh@redhat.com>

        PR middle-end/53008
        * trans-mem.c (ipa_tm_create_version_alias): Output new_node if
        accessed indirectly.
        (ipa_tm_create_version): Same.

2012-05-25  Uros Bizjak  <ubizjak@gmail.com>

        PR target/53474
        * config/i386/i386.c (ix86_print_operand) <case 'O'>: Print '.' here.
        <case 'C', case 'c', case 'F', case 'f'>: Print '.' only for C and c.

2012-05-25  Alexander Ivchenko  <alexander.ivchenko@intel.com>

        PR target/53435
        * config/i386/i386.c (ix86_expand_vec_perm): Use correct op.
        (ix86_expand_vec_perm): Use int mode instead of float.
        (expand_vec_perm_pshufb): Remove handling of useseless type
        conversion.

2012-05-25  Eric Botcazou  <ebotcazou@adacore.com>

        PR ada/52362
        * config.gcc (i[34567]86-*-mingw* | x86_64-*-mingw*): Set gas and
        gnu_ld variables to yes.
        * configure.ac (HAVE_GNU_LD): Move to after config.gcc inclusion.
        (HAVE_GNU_AS): Likewise.
        * config.in: Regenerate.
        * configure: Likewise.

2012-05-25  Tristan Gingold  <gingold@adacore.com>

        * config/i386/i386.c (struct ix86_frame): Remove unused frame field.
        (ix86_compute_frame_layout): Fix type of stack_alignment_needed
        and preferred_alignment.

2012-05-25  Tristan Gingold  <gingold@adacore.com>

        * common/config/ia64/ia64-common.c (ia64_except_unwind_info): Fix typo.

2012-05-25  Thomas Schwinge  <thomas@codesourcery.com>

        * fold-const.c (optimize_bit_field_compare): Abort early in the strict
        volatile bitfields case.

2012-05-24  Pat Haugen  <pthaugen@us.ibm.com>

        * config/rs6000/rs6000.c (rs6000_option_override_internal): Change
        rs6000_sched_costly_dep default to true_store_to_load_dep_costly.
        (adjacent_mem_locations): Move some code to and call...
        (get_memref_parts): ...new function.
        (mem_locations_overlap): New function.
        (rs6000_adjust_priority): Adjust calls to is_load_insn/is_store_insn.
        (is_mem_ref): Rename to...
        (find_mem_ref): ...this. Return MEM rtx.
        (get_store_dest): Remove function.
        (is_load_insn1, is_load_insn, is_store_insn1, is_store_insn): Add
        new parameter and adjust calls.
        (rs6000_is_costly_dependence): Update calls for extra arg. Make sure
        mem refs overlap for true_store_to_load_dep_costly.
        (rs6000_sched_reorder2): Update calls for extra arg. Adjust args
        passed to adjacent_mem_locations.
        (is_costly_group): Walk resolved dependency list.
        (force_new_group): Emit group ending nop for Power6/Power7.
        * config/rs6000/rs6000.md (UNSPEC_GRP_END_NOP): New enum value.
        (group_ending_nop): New define_insn.

2012-05-24  Dodji Seketeli  <dodji@redhat.com>

        Make unwound macro expansion trace less redundant
        * tree-diagnostic.c (maybe_unwind_expanded_macro_loc): Don't print
        context of macro definition in the trace, when it's redundant.
        Update comments.

2012-05-24  Richard Guenther  <rguenther@suse.de>

        PR middle-end/53460
        * tree-profile.c (tree_profiling): Cleanup the CFG if
        execute_fixup_cfg requests it.

2012-05-24  Richard Guenther  <rguenther@suse.de>

        * tree-flow.h (create_var_ann): Remove.
        * tree-dfa.c (create_var_ann): Remove and inline into its
        single caller ...
        (add_referenced_var_1): ... here.
        * varpool.c (add_new_static_var): Do not call add_referenced_var
        for global vars.
        * gimple-fold.c (canonicalize_constructor_val): Likewise.
        * tree-switch-conversion.c (build_one_array): Likewise.
        * tree-profile.c (gimple_gen_ic_profiler): Likewise.
        * tree-flow-inline.h (gimple_referenced_vars): Guard against
        NULL fn argument.
        * tree-inline.c (remap_gimple_op_r): Likewise.  Check
        gimple_referenced_vars instead of gimple_in_ssa_p.
        (copy_tree_body_r): Likewise.
        (setup_one_parameter): Likewise.
        (declare_return_variable): Likewise.
        (tree_function_versioning): Likewise.

2012-05-24  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/53465
        * tree-vrp.c (extract_range_from_cond_expr): First copy_value_range
        vr0 into *vr, then vrp_meet that.
        (vrp_meet): If one vr type is VR_UNDEFINED, ensure the result doesn't
        have any equivalences.
        (vrp_visit_phi_node): Call copy_value_range instead of vrp_meet the
        first time.

2012-05-24  Jim MacArthur  <jim.macarthur@arm.com>

        * recog.c (reg_fits_class_p): Check both regno and regno + offset are
        hard registers.
        * regs.h (in_hard_reg_set_p): Assert that regno is a hard register and
        check end_regno - 1 is a hard register.

2012-05-24  Richard Guenther  <rguenther@suse.de>

        * varpool.c (add_new_static_var): Remove call to create_var_ann.
        * tree-ssa-operands.c (create_vop_var): Likewise.

2012-05-24  Richard Guenther  <rguenther@suse.de>

        PR bootstrap/53466
        * tree-ssa-live.c (remove_unused_scope_block_p): Properly
        handle globals.
        (remove_unused_locals): Pass global_unused_vars to
        remove_unused_scope_block_p.  Restore code walking all
        referenced vars and pruning them.

2012-05-23  Jan Hubicka  <jh@suse.cz>

        * tree.h (alias_diag_flags): Remove.
        (alias_pair): Remove emitted_diags.
        (finish_aliases_1, finish_aliases_2, remove_unreachable_alias_pairs,
        symbol_alias_set_t, symbol_alias_set_destroy,
        symbol_alias_set_contains, propagate_aliases_backward): Remove.
        * toplev.c (compile_file): Do not call finish_aliases_2
        * cgraphunit.c (cgraph_process_new_functions): Do not call
        finish_aliases_1.
        (handle_alias_pairs): Output diagnostics about aliases to externals.
        (assemble_thunks_and_aliases): Use do_assemble_alias.
        (output_weakrefs): Likewise.
        (finalize_compilation_unit): Do not call finish_aliases_1.
        * ipa.c (symtab_remove_unreachable_nodes): De not call
        remove_unreachable_alias_pairs.
        * varasm.c (do_assemble_alias): Export.
        (symbol_alias_set_create, symbol_alias_set_destroy,
        symbol_alias_set_contains, symbol_alias_set_insert,
        propagate_aliases_forward, propagate_aliases_backward,
        propagate_aliases_backward, trivially_visible_alias,
        trivially_defined_alias, remove_unreachable_alias_pairs,
        finish_aliases_1, finish_aliases_2, assemble_alias): Remove.
        * output.h (do_assemble_alias): Declare.
        * varpool.c (varpool_remove_unreferenced_decls): Do not call
        finish_aliases_1.

2012-05-23  Martin Jambor  <mjambor@suse.cz>

        * ipa-inline-analysis.c (inline_merge_summary): Free operand_map.

2012-05-23  Eric Botcazou  <ebotcazou@adacore.com>

        * gimple.c (gimple_types_compatible_p_1) <ARRAY_TYPE>: Remove bogus
        size handling.
        (gimple_canonical_types_compatible_p) <ARRAY_TYPE>: Likewise.
        (iterative_hash_gimple_type): Adjust comment.
        (iterative_hash_canonical_type): Likewise.  Hash the bounds of the
        domain for an array type instead of the domain type itself.

2012-05-23  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53438
        * tree-sra.c (analyze_access_subtree): Correct bitfield exclusion.

2012-05-23  Georg-Johann Lay  <avr@gjlay.de>

        PR target/53448
        * config/avr/avr.h (ASM_OUTPUT_ALIGN): Don't inhibit .p2align 1.
        * config/avr/elf.h (ASM_OUTPUT_BEFORE_CASE_LABEL): Use
        ASM_OUTPUT_ALIGN.

2012-05-23  Richard Guenther  <rguenther@suse.de>

        * tree-dfa.c (add_referenced_var_1): Do not add global vars.
        * tree-ssa-live.c (mark_all_vars_used_1): Handle global vars
        via the global_unused_vars bitmap.
        (remove_unused_locals): Handle global vars in local-decls via
        a global_unused_vars bitmap instead of the used flag in the
        var annotation.  Simplify global variable handling and removal.

2012-05-22  Jan Hubicka  <jh@suse.cz>

        PR middle-end/53426
        * tree-ssa-structalias.c (create_variable_info_for): Skip constructors
        from other partitions.

2012-05-22  Jan Hubicka  <jh@suse.cz>

        PR middle-end/53161
        * symtab.c (symtab_register_node): Fix ordering issue.

2012-05-22  Steven Drake <sbd@NetBSD.org>

        * gcc.c (do_spec_1): Add %M spec token to output multilib_os_dir.

2012-05-22  David Edelsohn  <dje.gcc@gmail.com>

        * config/rs6000/rs6000.c (rs6000_aix_asm_output_dwarf_table_ref):
        Use strip_name_encoding target hook.

2012-05-22  Richard Guenther  <rguenther@suse.de>

        * tree.h (VAR_DECL_IS_VIRTUAL_OPERAND): New.
        (init_function_for_compilation): Remove.
        * tree-dfa.c (find_vars_r): Take struct function argument.
        (find_referenced_vars_in): Adjust.
        * tree-ssa-operands.c (clobber_stats): Remove.
        (create_vop_var): Take struct function argument.  Mark
        virtual operand with VAR_DECL_IS_VIRTUAL_OPERAND.
        (init_ssa_operands): Take struct function argument.
        (fini_ssa_operands): Do not dump dead stats.
        * tree-ssa-operands.h (init_ssa_operands): Take struct function
        argument.
        * cgraphunit.c (init_lowered_empty_function): Adjust.
        * lto-streamer-in.c (input_cfg): Likewise.
        * tree-inline.c (initialize_cfun): Likewise.
        * tree-into-ssa.c (rewrite_into_ssa): Likewise.
        * omp-low.c (expand_omp_taskreg): Likewise.  Avoid switching cfun.
        * gimple.c (is_gimple_reg): Optimize the SSA_NAME case,
        virtual operands are not registers.

2012-05-22  Richard Guenther  <rguenther@suse.de>

        * tree-cfg.c (verify_gimple_assign_unary): Fix typo in previous commit.

2012-05-22  Richard Guenther  <rguenther@suse.de>

        PR middle-end/53437
        * tree-inline.c (setup_one_parameter): Create a dummy init
        statement for unused parameters when not optimizing.

2012-05-22  Richard Guenther  <rguenther@suse.de>

        * tree-flow.h (add_referenced_var_1): Declare.
        (add_referenced_var): Define.
        * tree-dfa.c (referenced_var_check_and_insert): Avoid one hash lookup.
        (add_referenced_var): Rename to ...
        (add_referenced_var_1): ... this.  Take struct function argument.

2012-05-22  Ramana Radhakrishnan  <ramana.radhakrishnan@linaro.org>

        PR target/53334
        * config/arm/arm-protos.h (arm_validize_comparison): Declare.
        * config/arm/arm.c (arm_validize_comparison): Define.
        * config/arm/arm.md ("cbranchsi4"): Cleanup expansion and use
        arm_validize_comparison.
        ("cbranchdi4"): Likewise.
        ("cstoredi4"): Likewise.
        ("movsicc"): Likewise.
        ("movsfcc"): Likewise.
        ("movdfcc"): Likewise.

2012-05-22  Dimitrios Apostolou  <jimis@gmx.net>

        * df-scan.c (df_scan_alloc): Round up allocation pools size, reduce
        the mw_reg_pool size.

2012-05-22  Paolo Bonzini  <bonzini@gnu.org>

        PR tree-optimization/53336
        * tree-cfg.c (verify_gimple_assign_unary): Allow conversion from
        non-integer integral types to offset type and vice versa.

2012-05-22  Alan Modra  <amodra@gmail.com>

        * config/rs6000/aix.h (FP_SAVE_INLINE, GP_SAVE_INLINE): Delete.
        * config/rs6000/darwin.h (FP_SAVE_INLINE, GP_SAVE_INLINE): Delete.
        * config/rs6000/sysv4.h (FP_SAVE_INLINE, GP_SAVE_INLINE,
        V_SAVE_INLINE): Delete.
        * config/rs6000/rs6000.c (V_SAVE_INLINE): Delete.
        (rs6000_savres_strategy): Reimplement GP/FP/V_SAVE_INLINE logic.
        For ELF targets, use out-of-line restores for -Os and any number
        of regs if the restore exits, and out-of-line gp save for two or
        more regs.  Use save_reg_p to test for holes in reg restore set.
        Replace "#if" with "if".

2012-05-22  Alan Modra  <amodra@gmail.com>

        * config/rs6000/rs6000.c (save_reg_p): New function.
        (first_reg_to_save, first_fp_reg_to_save): Use it here.
        (first_altivec_reg_to_save, restore_saved_cr): Likewise.
        (emit_frame_save): Use gen_frame_store.
        (gen_frame_mem_offset): Correct SPE condition requiring reg+reg.
        (rs6000_emit_prologue): Use save_reg_p.  Use gen_frame_store for
        vrsave and toc.
        (rs6000_emit_epilogue): Use save_reg_p.  Use gen_frame_load for
        vrsave, toc, gp and fp restores.

2012-05-22  Alan Modra  <amodra@gmail.com>

        * config/rs6000/rs6000.c: Delete unnecessary forward declarations.
        Move those with ATTRIBUTE_UNUSED to immediately before definitions.
        Move function pointer variables after forward declarations.
        (rs6000_builtin_support_vector_misalignment): Make static.
        (rs6000_legitimate_address_p, rs6000_gimplify_va_arg): Likewise.
        (rs6000_function_value, rs6000_can_eliminate): Likewise.

2012-05-21  Bernd Schmidt  <bernds@codesourcery.com>

        PR rtl-optimization/53373
        * caller-save.c (save_call_clobbered_regs): Look into a possible
        PARALLEL manually rather than using single_set on a call insn.

2012-05-21  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/53436
        * omp-low.c (omp_build_component_ref): New function.
        (build_receiver_ref, build_sender_ref, create_task_copyfn): Use it.

2012-05-21  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (put_condition_code): Change "reverse" and "fp"
        arguments to bool.
        (ix86_print_operand) <case 'O'>: Look at mode size of the operand.
        Do not print '.' here.  Output operand lossage error for unhandled
        sizes.  Move.
        <case '*'>: Move.
        <case '&'>: Ditto.
        <case 'Y'>: Ditto.
        <case 'z'>: Hardcode "code" argument into error strings.
        <case 'Z'>: Ditto.
        <case 'D'>: Merge AVX and non-AVX codes.
        <case 'C', case 'c', case 'F', case 'f'>: Merge.  Fix error string.
        Update call to put_condition_code.

2012-05-21  Andreas Schwab  <schwab@linux-m68k.org>

        * config/m68k/m68k.md (*clzsi2_cf): Renamed from clzsi2.  Call
        CC_STATUS_INIT.
        (clzsi2): New expander.
        (*clzsi2_68k): New insn.
        * config/m68k/m68k.h: Update comment about CLZ_DEFINED_VALUE_AT_ZERO.

2012-05-21  Aldy Hernandez  <aldyh@redhat.com>

        * gimple.h (gimple_set_in_transaction): Remove.
        (gimple_in_transaction): Look in BB instead.
        (gimple_statement_base): Remove in_transaction field.
        * basic-block.h (enum bb_flags): Add BB_IN_TRANSACTION.
        * trans-mem.c (compute_transaction_bits): Place transaction bit
        information into basic blocks.

2012-05-21  Andreas Schwab  <schwab@linux-m68k.org>

        * expr.c (get_def_for_expr_class): Define only if
        HAVE_conditional_move.
        (convert_tree_comp_to_rtx): Likewise.

2012-05-21  Uros Bizjak  <ubizjak@gmail.com>

        PR target/53399
        * config/i386/i386.md (ffs<mode>2): Generate CCCmode compare
        for TARGET_BMI.
        (ffssi2_no_cmove): Ditto.
        (*ffs<mode>_1): Remove insn pattern.
        (*tzcnt<mode>_1): New insn pattern.
        (*bsf<mode>1): Ditto.

2012-05-21  Richard Guenther  <rguenther@suse.de>

        * tree-dfa.c (add_referenced_var): Do not walk DECL_INITIAL for
        more referenced vars.
        * tree-ssa-live.c (mark_all_vars_used_1): Only set the used
        flag on variables that have a var-annotation.

2012-05-21  Joseph Myers  <joseph@codesourcery.com>

        PR c/53418
        * c-typeck.c (build_conditional_expr): Remove C_MAYBE_CONST_EXPR
        from folded operands before wrapping another around the
        conditional expression.

2012-05-21  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/53366
        * tree-vect-slp.c (vect_supported_load_permutation_p): Don't shortcut
        tests if complex_numbers == 2, but there are non-complex number loads
        too.

        PR tree-optimization/53409
        * tree-vect-loop.c (vect_analyze_loop_operations): Don't check
        vinfo_for_stmt (op_def_stmt) if op_def_stmt isn't inside loop.

        PR tree-optimization/53410
        * fold-const.c (fold_binary_loc): Use build_zero_cst (type)
        instead of build_int_cst (type, 0) where vector types might be
        involved. Instead of build_int_cst (type, 1) convert the original
        integer_onep argument to the desired type.

2012-05-21  Michael Matz  <matz@suse.de>

        * genattrtab.c (attr_rtx_cost): Move earlier, start with cost being 1.
        (simplify_test_exp): Handle one more case of distributive law,
        decrease cost threshold.
        (tests_attr_p, get_attr_order): New functions.
        (optimize_attrs): Use topological order, inline only cheap values.
        (write_attr_set): Reset our_known_true after some time.

2012-05-21  H.J. Lu  <hongjiu.lu@intel.com>

        PR target/53425
        * config/i386/i386.c (type_natural_mode): Warn passing SSE
        vector argument without SSE enabled changes the ABI.

2012-05-21  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53408
        * tree-vect-loop.c (vectorizable_induction): Properly check
        the restriction that we cannot handle induction results from
        the inner loop outside of the outer loop.

2012-05-21  H.J. Lu  <hongjiu.lu@intel.com>

        PR target/53416
        * config/i386/i386.md (UNSPEC_RDRAND): Renamed to ...
        (UNSPECV_RDRAND): This.
        (rdrand<mode>_1): Updated.

2012-05-21  Richard Guenther  <rguenther@suse.de>

        * tree-loop-distribution.c (can_generate_builtin): Reject
        volatile stmts.

2012-05-21  Chung-Lin Tang  <cltang@codesourcery.com>

        * Makefile.in (options.c): Add options.h to included header
        files, before tm.h.

2012-05-21  Razya Ladelsky  <razya@il.ibm.com>

        * tree-parloops.c : Add myself to contributors, update
        TODO list, add link to wiki.

2012-05-21  Alan Modra  <amodra@gmail.com>

        * config/rs6000/predicates.md (input_operand): Don't match
        constant pool addresses.  Remove label_ref, high and plus from
        match_code list.  Remove redundant CONSTANT_P test.
        (splat_input_operand): Similarly update match_code list.
        (small_toc_ref): New predicate.
        * config/rs6000/rs6000-protos.h (toc_relative_expr_p): Update prototype.
        * config/rs6000/rs6000.c (tocrel_base, tocrel_offset): Make const.
        (legitimate_constant_pool_address_p): Move TARGET_TOC test and
        register checks to..
        (toc_relative_expr_p): ..here.  Add "strict" param.  Match new rtl
        generated by create_TOC_reference.
        (rs6000_legitimize_address): Update cerate_TOC_reference call.
        (rs6000_delegitimize_address): Handle new rtl for toc refs.
        (rs6000_cannot_force_const_mem, rs6000_find_base_term): Likewise.
        (use_toc_relative_ref): New function, split out from..
        (rs6000_emit_move): ..here.  Remove redundant tests.  Update
        create_TOC_reference calls.
        (rs6000_legitimize_reload_address): Formatting.  Handle splitting
        of medium/large model toc addresses.  Use use_toc_relative_ref.
        (print_operand): Formatting, style.  Adjust for toc changes.
        (print_operand_address): Likewise.
        (rs6000_output_addr_const_extra): Likewise.
        (create_TOC_reference): Put TOC_REGISTER in UNSPEC_TOCREL rather
        than a PLUS.  Use this formulation for both high and low part
        of -mcmodel=medium/large toc reference too.  Before reload,
        always use the small model formulation.
        * config/rs6000/rs6000.md (tls_gd, tls_gd_high): Similarly avoid
        a PLUS in high part of addresses here.
        (tls_ld, tls_ld_high, tls_got_dtprel, tls_got_dtprel_high): Likewise.
        (tls_got_tprel, tls_got_tprel_high, largetoc_high): Likewise.
        (largetoc_high, largetoc_low): Move earlier.  Cope when no
        base reg available.
        (largetoc_high_plus): New insn.
        (movsi_internal1, movsi_internal1_single, movsf_softfloat,
        movdi_mfpgpr, movdi_internal64): Don't handle 'R' constraint here..
        (tocref): ..instead do so here, new insn and split.

2012-05-20  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/driver-i386.c (host_detect_local_cpu): Support
        RDRND, F16C and FSGSBASE.

2012-05-20  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        PR rtl-optimzation/53373
        * config/pa/pa.md (call_symref_pic): Don't expose PIC register save in
        call pattern.  Update split patterns.
        (call_symref_64bit, call_reg_pic, call_reg_64bit, call_val_symref_pic,
        call_val_symref_64bit, call_val_reg_pic, call_val_reg_64bit): Likewise.

2012-05-20  Razya Ladelsky  <razya@il.ibm.com>

        * tree-parloops.c (gen_parallel_loop): Change many_iterations_cond
        for outer loops.

2012-05-18  Jan Hubicka  <jh@suse.cz>

        * cgraphunit.c (handle_alias_pairs): Declare; free alias_pairs
        (cgraph_process_new_functions): Process also aliases.
        * lto-streamer-out.c (struct sets): Remove.
        (trivally_defined_alias): Remove.
        (output_alias_pair_p): Remove.
        (output_unreferenced_globals): Remove.
        (produce_symtab); Do not handle alias pairs.
        (produce_asm_for_decls): Likewise.
        * lto-streamer-in.c (input_alias_pairs): Remove.
        (lto_read_body): Do not input alias pairs.
        (lto_input_constructors_and_inits): Remove.

2012-05-18  Jan Hubicka  <jh@suse.cz>

        * cgraphunit.c (handle_alias_pairs): Cleanup; handle all types of
        aliases.

2012-05-18  Jan Hubicka  <jh@suse.cz>

        * cgraphbuild.c (record_reference): Update.
        * lto-cgraph.c (lto_output_varpool_node): External vars
        are not in other partition even if they are not output
        in current partition.
        * gimple-fold.c (can_refer_decl_in_current_unit_p): Take FROM_DECL
        argument; fix.
        (canonicalize_constructor_val): Take FROM_DECL argument.
        (fold_ctor_reference, fold_string_cst_ctor_reference,
        fold_array_ctor_reference, fold_nonarray_ctor_reference,
        fold_ctor_reference): Likewise.
        (fold_const_aggregate_ref_1, gimple_get_virt_method_for_binfo): Update.
        * gimple.h (gimple_fold_builtin): Likewise.

2012-05-18  Olivier Hainque  <hainque@adacore.com>

        * Makefile.in (FLAGS_TO_PASS): Pass $(libexecsubdir) instead of
        $(libsubdir) as libexecsubdir.

2012-05-18  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

        * config/rs6000/rs6000.c (print_operand): Revise code that unsafely
        relied on signed overflow behavior.

2012-05-18  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53346
        * tree-loop-distribution.c (ldist_gen): Make sure to apply
        builtin transform even when only a single partition with
        all reads/writes exists.

2012-05-18  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53390
        * tree-vect-data-refs.c (vect_compute_data_ref_alignment): Ignore
        strided loads.

2012-05-18  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

        * tree-ssa-reassoc.c (bip_map): Remove decl.
        (completely_remove_stmt): Remove function.
        (remove_def_if_absorbed_call): Remove function.
        (remove_visited_stmt_chain): Remove __builtin_powi handling.
        (possibly_move_powi): Remove function.
        (rewrite_expr_tree): Remove calls to possibly_move_powi.
        (rewrite_expr_tree_parallel): Likewise.
        (attempt_builtin_powi): Build multiplies explicitly rather than
        relying on the ops vector and rank system.
        (transform_stmt_to_copy): New function.
        (transform_stmt_to_multiply): Likewise.
        (reassociate_bb): Handle leftover operations after __builtin_powi
        optimization; build a final multiply if necessary.

2012-05-18  Jan Hubicka  <jh@suse.cz>

        * cgraphunit.c (varpool_finalize_decl): Allow external decls.
        (mark_functions_to_output): Fix sanity check.
        * ipa.c (function_and_variable_visibility): Remove TREE_STATIC check.

2012-05-18  Richard Guenther  <rguenther@suse.de>

        * tree-flow.h (mark_symbols_for_renaming): Remove.
        * tree-dfa.c (mark_symbols_for_renaming): Likewise.
        * tree-inline.c (copy_edges_for_bb): Do not mark symbols for renaming.
        (copy_debug_stmt): Likewise.
        (expand_call_inline): Likewise.
        (declare_return_variable): Mark the return variable for renaming
        if necessary.

2012-05-18  Andrew Stubbs  <ams@codesourcery.com>

        * config/arm/arm-protos.h (arm_emit_coreregs_64bit_shift): New
        prototype.
        * config/arm/arm.c (arm_emit_coreregs_64bit_shift): New function.
        * config/arm/arm.md (ashldi3): Use arm_emit_coreregs_64bit_shift.
        (ashrdi3,lshrdi3): Likewise.
        (arm_cond_branch): Remove '*' to enable gen_arm_cond_branch.

2012-05-18  Meador Inge  <meadori@codesourcery.com>

        PR rtl-optimization/53352
        * cse.c (equiv_constant): Ignore paradoxical subregs.

2012-05-17  Steven Bosscher  <steven@gcc.gnu.org>

        PR rtl-optimization/53125
        * regstat.c (regstat_bb_compute_ri): Take new local_live_last_luid
        argument.  Simplify calculation of REG_LIVE_LENGTH for regnos that
        die in the basic block.  Correctly top off REG_FREQ and
        REG_FREQ_CALLS_CROSSED.
        Remove do_not_gen.
        (regstat_compute_ri): Allocate and free local_live_last_luid.
        Remove do_not_gen.
        (regstat_bb_compute_calls_crossed): Correctly top off
        REG_FREQ_CALLS_CROSSED.

2012-05-17  Jan Hubicka  <jh@suse.cz>

        * lto-symtab.c (lto_symtab_resolve_symbols): Preffer decl with
        constructor over decl without.
        * cgraph.c (cgraph_remove_node): Clear also body of unanalyzed nodes.
        * cgraph.h (varpool_can_remove_if_no_refs): Handle external correctly.
        * cgraphunit.c (process_function_and_variable_attributes): Finalize
        extrnal decls.
        (mark_functions_to_output): Also accept bodies for functions with
        clones.
        (output_in_order): Skip external vars.
        * lto-cgraph.c (lto_output_node): External functions are never in other
        partition.
        (lto_output_varpool_node): Likewise.
        * lto-streamer-out.c (lto_write_tree): Always use error_mark_nodes for
        forgotten initializers.
        * ipa.c (process_references): Handle external vars.
        (symtab_remove_unreachable_nodes): Update to handle external vars.
        (varpool_externally_visible_p): External vars are externally visible.
        * gimple-fold.c (can_refer_decl_in_current_unit_p): Update.
        * varpool.c (varpool_remove_node): Remove constructor.
        (decide_is_variable_needed): Handle externals.
        (varpool_remove_unreferenced_decls): Likewise.

2012-05-17  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        * opts.c (common_handle_option): -pedantic-errors enables -Wpedantic.
        (enable_warning_as_error): Do not special case Wuninitialized.
        * optc-gen.awk: Add sanity checks.

2012-05-17  Jan Hubicka  <jh@suse.cz>

        * ipa-reference.c (is_proper_for_analysis): Do not check flags
        that might change as result of global optimization.
        (analyze_function): Do not check analyzed and externally_visible
        flags; be happy about address dereferences.
        (propagate): Prune all_module_statics so it really contains just
        statics; prune all the local summaries.
        (ipa_reference_write_optimization_summary): Simplify.

2012-05-17  Kwok Cheung Yeung  <kcy@codesourcery.com>

        * config/m68k/m68k-devices.def: Add 51ag, 51je, 51jf, 51jg, 51mm, 51qm.
        * config/m68k/m68k-tables.opt: Regenerated.
        * doc/invoke.texi (M680x0 Options): Document.

2012-05-16  Dave Boutcher  <daveboutcher@gmail.com>
            Patrick Marlier  <patrick.marlier@gmail.com>

        * trans-mem.c (ipa_tm_transform_clone): Transform functions with
        indirect calls.

2012-05-16  H.J. Lu  <hongjiu.lu@intel.com>

        * configure: Regenerated.

2012-05-16  Andrew Pinski  <apinski@cavium.com>

        * gimple-fold.c (get_maxval_strlen): Move COND_EXPR handling under
        GIMPLE_ASSIGN.

2012-05-16  David S. Miller  <davem@davemloft.net>

        * jump.c (delete_related_insns): If we remove a CALL, make sure
        we delete it's NOTE_INSN_CALL_ARG_LOCATION note too.

2012-05-16  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

        PR tree-optimization/53217
        * tree-ssa-reassoc.c (bip_map): New static variable.
        (possibly_move_powi): Move feeding multiplies with __builtin_powi call.
        (attempt_builtin_powi): Save feeding multiplies on a stack.
        (reassociate_bb): Create and destroy bip_map.

2012-05-16  Olivier Hainque  <hainque@adacore.com>

        * Makefile.in (install-no-fixedincludes): New target, former toplevel
        gcc-no-fixedincludes. Stash "include-fixed" in addition to "include".
        Add comments and improve stamp preservation across the whole sequence.
        (stmp-int-hdrs): Use move-if-change + cp -p to setup fix_dir/limits.h.

2012-05-16  Richard Guenther  <rguenther@suse.de>

        * tree-inline.c (insert_init_stmt): Do not call
        mark_symbols_for_renaming.
        (setup_one_parameter): Avoid initializing unused parameters.
        (declare_return_variable): Properly handle DECL_BY_REFERENCE
        return vars in SSA form.

2012-05-16  Richard Guenther  <rguenther@suse.de>

        * tree-flow.h (get_virtual_var): Remove.
        * tree-dfa.c (get_virtual_var): Likewise.

2012-05-16  Richard Guenther  <rguenther@suse.de>

        * tree-vect-loop-manip.c (slpeel_update_phi_nodes_for_guard1):
        Remove set-only bitmap of new names.
        (slpeel_tree_peel_loop_to_edge): Likewise.  Do not set
        CFG hooks.
        * tree-flow.h (ssa_names_to_replace): Remove.
        * tree-into-ssa.c (ssa_names_to_replace): Likewise.

2012-05-16  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53364
        * tree-ssa-alias.c (indirect_ref_may_alias_decl_p): Properly
        detect a view-conversion of the decl.

2012-05-16  Dodji Seketeli  <dodji@redhat.com>

        PR preprocessor/7263
        * c-tree.h (enum c_declspec_word): Declare new enum.
        (struct c_declspecs::locations): New member.
        (declspecs_add_qual, declspecs_add_scspec)
        (declspecs_add_addrspace, declspecs_add_alignas): Take a new
        location parameter.
        * c-decl.c (build_null_declspecs): Initialize the new struct
        c_declspecs::locations member.
        (declspecs_add_addrspace): Take a location parameter for the
        address space.  Store it onto declaration specifiers.
        (declspecs_add_qual): Likewise, take a location parameter for the
        qualifier.
        (declspecs_add_type): Likewise, take a location parameter for the
        type specifier.
        (declspecs_add_scspec): Likewise, take a location parameter for
        the storage class specifier.
        (declspecs_add_attrs): Likewise, take a location parameter for the
        first attribute.
        (declspecs_add_alignas): Likewise, take a location parameter for
        the alignas token.
        (finish_declspecs): For diagnostics, use the location of the
        relevant declspec, instead of the global input_location.
        * c-parser.c (c_parser_parameter_declaration): Pass the precise
        virtual location of the declspec to the declspecs-setters.
        (c_parser_declspecs): Likewise.  Avoid calling c_parser_peek_token
        repeatedly.

2012-05-16  Igor Zamyatin  <igor.zamyatin@intel.com>

        * configure.ac: Stack protector enabling for Android targets.
        * configure: Regenerate.

2012-05-16  Richard Sandiford  <r.sandiford@uk.ibm.com>

        * ira.c (pseudo_move_insn): Delete.
        (find_moveable_pseudos): Don't set it.
        (move_unallocated_pseudos): Use DF_REG_DEF_CHAIN to find
        the definitions of the original pseudo.  Delete all of them.

2012-05-16  Olivier Hainque  <hainque@adacore.com>

        * config/rs6000/rs6000-opts.h (enum processor_type): Add
        PROCESSOR_PPC8548.
        * config/rs6000/rs6000-cpus.def: Reference it for cpu="8548".
        * config/rs6000/rs6000.md (cpu attribute definition): Add ppc8548.
        * config/rs6000/8540.md: indicate that the units/patterns apply to
        ppc8548 as well.

        * config/rs6000/rs6000.c (rs6000_option_override_internal): Rename
        default_cpu into implicit_cpu, conveying what --with-cpu was passed at
        configure time. Treat implicit_cpu as have_CPU. Pick defaults for SPE
        related flags,  check that what is queried is supported by the selected
        configuration. Rework the single/double_float and MASK_STRING resets to
        hit for all the E500 cores (854x + E500MC variants). Select the ppc8540
        costs for PROCESSOR_PPC8548 as well.
        (rs6000_issue_rate): case CPU_PPC8548 together with CPU_PPC8540.
        (rs6000_use_sched_lookahead): Likewise, rewriting function as a case
        statement instead of a sequence of ifs.

        * config/rs6000/rs6000.h (TARGET_E500): Remove.
        (TARGET_NO_LWSYNC): Adjust accordingly.
        * config/rs6000/e500.h (TARGET_E500): Remove.
        (CHECK_E500_OPTIONS): Adjust accordingly.
        * config/rs6000/eabispe.h (SUBSUBTARGET_OVERRIDE_OPTIONS): Remove.
        (TARGET_DEFAULT): Reformat definition to match the one in linuxspe.h.
        * config/rs6000/linuxspe.h: Likewise.
        * config/rs6000/vxworks.h: Remove bogus TARGET_E500 overrides and
        superfluous comments.
        * config/rs6000/e500-double.h: Remove.

        * config.gcc (pick a default with_cpu): For powerpc*-*-*spe*,
        default to with_cpu=8548 if --enable-e500-double, and to 8540
        otherwise.
        (set misc flags section): For powerpc*|rs6000*, remove inclusion
        of e500-double.h for --enable-e500-double.

2012-05-16  Olivier Hainque  <hainque@adacore.com>

        * Makefile.in (s-header-vars): Resort to -n instead of trailing
        -e d in sed invocation.

2012-05-16  Hans-Peter Nilsson  <hp@axis.com>

        * doc/tm.texi.in (Type Layout) <SIZE_TYPE>: Update reference to
        source-code.
        * doc/tm.texi: Regenerate.

2012-05-15  Paolo Carlini  <paolo.carlini@oracle.com>

        * tree.h (EXPR_LOCATION): Use CAN_HAVE_LOCATION_P.

2012-05-15  Jakub Jelinek  <jakub@redhat.com>

        PR target/53358
        * config/i386/i386.md (*addqi_2 peephole with QImode addition): Check
        that operands[2] is either immediate, or q_regs_operand.

2012-05-15  Richard Guenther  <rguenther@suse.de>

        * cgraphunit.c (thunk_adjust): Use make_rename_temp.
        (assemble_thunk): Likewise.  Manually rename and register
        function arguments.

2012-05-15  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53355
        * tree-vrp.c (extract_range_from_binary_expr_1): Handle LSHIFT_EXPRs
        by constants.

2012-05-15  Tristan Gingold  <gingold@adacore.com>

        * tree-ssa-strlen.c (get_string_length): Convert lhs if needed.

2012-05-15  Richard Guenther  <rguenther@suse.de>

        * gimple.c (gimple_set_modified): Move ...
        * gimple.h (gimple_set_modified): ... here.

2012-05-15  Tristan Gingold  <gingold@adacore.com>

        * ira-color.c (move_spill_restore): Add a guard.

2012-05-15  Tristan Gingold  <gingold@adacore.com>

        * config/ia64/ia64.c (ia64_emit_probe_stack_range): Adjust calls to
        plus_constant.

2012-05-15  Eric Botcazou  <ebotcazou@adacore.com>

        * gimplify.c (gimplify_init_constructor): Do a block move for very
        small objects as well.

2012-05-15  Bernd Schmidt  <bernds@codesourcery.com>

        * ira.c (find_moveable_pseudos): Skip registers whose
        DF_REG_EQ_USE_COUNT is nonzero.

2012-05-15  Kenneth Zadeck  <zadeck@naturalbridge.com>

        * doc/md.texi (fma): Define to only be applicable for single rounding.

2012-05-14  Uros Bizjak  <ubizjak@gmail.com>

        PR target/46098
        * config/i386/i386.c (ix86_expand_special_args_builtin): Always
        generate target register for "load" class builtins.

        Revert:
        2010-10-22  Uros Bizjak  <ubizjak@gmail.com>

        PR target/46098
        * config/i386/sse.md (*avx_movu<ssemodesuffix><avxmodesuffix>):
        Rename from avx_movu<ssemodesuffix><avxmodesuffix>.
        (avx_movu<ssemodesuffix><avxmodesuffix>): New expander.
        (*<sse>_movu<ssemodesuffix>): Rename from <sse>_movu<ssemodesuffix>.
        (<sse>_movu<ssemodesuffix>): New expander.
        (*avx_movdqu<avxmodesuffix>): Rename from avx_movdqu<avxmodesuffix>.
        (avx_movdqu<avxmodesuffix>): New expander.
        (*sse2_movdqu): Rename from sse2_movdqu.
        (sse2_movdqu): New expander.

2012-05-14  Marc Glisse  <marc.glisse@inria.fr>

        PR target/52607
        * config/i386/i386.c (ix86_expand_vec_perm_const): Move code to ...
        (canonicalize_perm): ... new function.
        (expand_vec_perm_2vperm2f128_vshuf): New function.
        (ix86_expand_vec_perm_const_1): Call it.

2012-05-14  Andrew Pinski  <apinski@cavium.com>
            H.J. Lu  <hongjiu.lu@intel.com>
            Jakub Jelinek  <jakub@redhat.com>

        PR target/53315
        * config/i386/i386.md (xbegin_1): Use + in constraint and match_dup.
        (xbegin): Updated.

2012-05-14  Jakub Jelinek  <jakub@redhat.com>

        * dwarf2out.c (dwarf2out_define, dwarf2out_undef): Treat
        lineno 1 the same as lineno 0 before first start file directive.
        (optimize_macinfo_range): Likewise.

        * dwarf2out.c (have_macinfo): Define.
        (dwarf2out_finish): Don't emit DW_AT_GNU_macros or DW_AT_macro_info
        attribute, don't force empty compilation unit and don't emit any
        .debug_macinfo/.debug_macro section if macinfo_table is empty.

2012-05-14  Georg-Johann Lay  <avr@gjlay.de>

        PR target/53344
        * config/avr/avr.c (avr_const_address_lo16): Remove.
        (avr_assemble_integer):  Print ".byte lo8(x)",
        ".byte hi8(x)", ".byte hh8(x)" instead of emit an assembler
        .warning if 3-byte address is assembled.
        * doc/extend.texi (AVR Named Address Spaces): Document that
        binutils 2.23 is needed to assemble 3-byte addresses.

2012-05-14  Richard Guenther  <rguenther@suse.de>

        * tree-vect-data-refs.c (vect_setup_realignment): Remove
        call to mark_symbols_for_renaming.
        (vect_permute_load_chain): Likewise.
        * tree-vect-loop.c (vect_is_slp_reduction): Update stmt
        instead of calling mark_symbols_for_renaming.
        * tree-vect-stmts.c (read_vector_array): Remove call to
        mark_symbols_for_renaming.
        (write_vector_array): Likewise.
        (vectorizable_call): Likewise.
        (vectorizable_store): Likewise.
        (vectorizable_load): Likewise.
        * matrix-reorg.c (transform_allocation_sites): Likewise.
        * tree-ssa-pre.c (create_expression_by_pieces): Likewise.
        (create_expression_by_pieces): Likewise.

2012-05-14  Richard Guenther  <rguenther@suse.de>

        * gimplify.c (gimple_regimplify_operands): Only mark the LHS
        of statements for renaming.
        (force_gimple_operand_1): Likewise, consistently for both
        calls to force_gimple_operand and force_gimple_operand_gsi.

2012-05-14  Richard Guenther  <rguenther@suse.de>

        * tree-dfa.c (make_rename_temp): Be forgiving if not in SSA form.
        * omp-low.c (expand_omp_taskreg): Properly conditionalize call
        to update_ssa.
        (expand_omp_for): Likewise.
        (expand_omp_for_generic): Adjust conditional add to referenced vars.
        Use make_rename_temp for temporaries that should be rewritten into
        SSA form.
        (expand_omp_for_static_nochunk): Likewise.
        (expand_omp_atomic_pipeline): Likewise.

2012-05-14  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53331
        * tree-vect-data-refs.c (vect_verify_datarefs_alignment): Ignore
        strided loads.
        * tree-vect-stmts.c (vect_model_load_cost): Handle strided loads.

2012-05-14  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR 53063
        * doc/options.texi: (LangEnabledBy): Document it.
        * optc-gen.awk: Handle LangEnabledBy.
        * opth-gen.awk: Generate declaration for lang-specific functions.
        * opt-read.awk: Record lang numbers.
        * opt-functions.awk (flag_set_p): Ignore the arguments of flags.
        (lang_sanitized_name): New.

2012-05-14  Bernd Schmidt  <bernds@codesourcery.com>

        * attribs.c (decl_attributes): Avoid emitting a warning if
        ATTR_FLAG_BUILT_IN.
        * doc/rtl.texi (CALL_INSN_FUNCTION_USAGE): Use lowercase for rtx
        codes.  Document meaning of sets inside CALL_INSN_FUNCTION_USAGE.
        * builtin-attrs.def (DEF_ATTR_FOR_STRING): Define.  Use it to
        define a string "1".
        (ATTR_RET1_NOTHROW_NONNULL_LEAF): New attr definition.
        * builtins.def (BUILT_IN_MEMCPY, BUILT_IN_MEMMOVE, BUILT_IN_MEMSET,
        BUILT_IN_STRCPY): Use it for these functions.
        * postreload.c (reload_combine): Deal with SETs inside
        CALL_INSN_FUNCTION_USAGE.
        * caller-save.c (setup_save_areas, save_call_clobbered_regs):
        Look for REG_RETURNED notes and use a cheap restore if possible.
        * ira-int.h (struct ira_allocno): New member cheap_calls_crossed_num.
        (ALLOCNO_CHEAP_CALLS_CROSSED_NUM): New macro.
        * ira-build.c (ira_create_allocno, create_cap_allocno,
        propagate_allocno_info, propagate_some_info_from_allocno,
        copy_info_to_removed_store_destination, ira_flattening): Handle it.
        * ira-lives.c (pseudo_regno_single_word_and_live_p,
        find_call_crossed_cheap_reg): New static functions.
        (process_bb_node_lives): Look for SETs in CALL_INSN_FUNCTION_USAGE,
        and set ALLOCNO_CHEAP_CALLS_CROSSED_NUM if possible.  Also make
        a REG_RETURNED note in that case.
        * ira.c (setup_reg_renumber): Change assert to allow cases where
        allocnos only cross calls for which they are cheap to restore.
        * ira-costs.c (ira_tune_allocno_costs): Compare
        ALLOCNO_CALLS_CROSSED_NUM to ALLOCNO_CHEAP_CALLS_CROSSED_NUM rather
        than 0.
        * reg-notes.def (REG_RETURNED): New note.
        * cse.c (cse_insn): Likewise.
        * sched-deps.c (sched_analyze_insn): Likewise.
        * expr.c (init_block_move_fn): Set a "fn spec" attribute.
        * calls.c (decl_return_flags): New static function.
        (expand_call): Generate a SET in CALL_INSN_FUNCTION_USAGE for
        functions that return one of their arguments.
        * regcprop.c (struct kill_set_value_data): New.
        (kill_set_value): Interpret data as a pointer to such a struct.
        Do nothing if the caller wants the register to be ignored.
        (copyprop_hardreg_forward_1): Handle SETs in CALL_INSN_FUNCTION_USAGE.

2012-05-14  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53340
        * tree-ssa-pre.c (op_valid_in_sets): Fix error in last commit.

2012-05-14  Richard Guenther  <rguenther@suse.de>

        * gimplify.c (gimplify_expr): Remove odd code.

2012-05-14  Eric Botcazou  <ebotcazou@adacore.com>

        * stor-layout.c (bit_from_pos): Distribute conversion to bitsizetype
        into a PLUS_EXPR byte offset.

        * tree-ssa-pre.c (can_value_number_call): Delete.
        (compute_avail): Skip all statements with side effects.
        <GIMPLE_CALL>: Skip calls to internal functions.

2012-05-13  Steven Bosscher  <steven@gcc.gnu.org>

        * config/pa/pa.md: Use define_c_enum for "unspec" and "unspecv".

2012-05-13  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        * common.opt (Wtype-limits): Use EnabledBy.

2012-05-13  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*pushtf): Enable for TARGET_SSE.
        (pushtf splitter): Ditto.
        (movtf): Ditto.
        (*movtf_internal): Ditto. Use V4SFmode for !TARGET_SSE2.
        (<code>tf2): Enable for TARGET_SSE.
        (*absnegtf2_sse): Ditto.
        (copysign<mode>3): Enable TFmode for TARGET_SSE.
        (copysign<mode>3_const): Ditto.
        (copysign<mode>3_var): Ditto.
        * config/i386/sse.md (<code>tf3): Enable for TARGET_SSE.
        (*andnottf3): Ditto.  Use V4SFmode for !TARGET_SSE2.
        (*<code>tf3): Ditto.
        * config/i386/i386.c (struct builtin_description bdesc_args)
        <IX86_BUILTIN_FABSQ>: Enable for TARGET_SSE.
        <IX86_BUILTIN_COPYSIGNQ>: Ditto.
        (ix86_expand_builtin) <IX86_BUILTIN_FABSQ, IX86_BUILTIN_COPYSIGNQ>:
        Emit a normal call if SSE isn't available.

2012-05-13  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/sse.md (<sse>_andnot<mode>3): Handle
        TARGET_SSE_PACKED_SINGLE_INSN_OPTIMAL.
        (<code><mode>3): Ditto.
        (*andnot<mode>3): Ditto.
        (*andnottf3): Ditto.
        (*<code><mode>3): Ditto.
        (<code>tf3): Ditto.

2012-05-13  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        * optc-gen.awk: Error instead of warning for conflicting help.

2012-05-12  Jason Merrill  <jason@redhat.com>

        PR debug/53235
        * dwarf2out.c (build_local_stub): Prefer DW_AT_signature for
        comdat types.

2012-05-12  Eric Botcazou  <ebotcazou@adacore.com>

        * function.c (requires_stack_frame_p): If the function can throw
        non-call exceptions, return true if the insn can throw internally.

2012-05-12  Paolo Carlini  <paolo.carlini@oracle.com>

        * doc/generic.texi: Rename TYPE_PTRMEM_P to TYPE_PTRDATAMEM_P.

2012-05-12  Uros Bizjak  <ubizjak@gmail.com>

        * config/alpha/alpha.c (alpha_emit_conditional_branch): Handle
        ORDERED and UNORDERED conditions.

2012-05-11  Richard Guenther  <rguenther@suse.de>

        * tree-flow.h (referenced_var_check_and_insert): Remove.
        (find_new_referenced_vars): Likewise.
        * tree-dfa.c (referenced_var_check_and_insert): Make static.
        (find_new_referenced_vars_1, find_new_referenced_vars): Remove.
        * tree-inline.c (copy_bb): Use find_referenced_vars_in
        instead of find_new_referenced_vars.
        * gimple-fold.c (gimplify_and_update_call_from_tree): Likewise.

2012-05-11  Richard Guenther  <rguenther@suse.de>

        * tree-pass.h (pass_rest_of_compilation,
        pass_all_optimizations, pass_postreload, pass_all_early_optimizations):
        Remove.
        * passes.c (pass_all_optimizations, pass_postreload,
        pass_all_early_optimizations): Make static.
        (pass_rest_of_compilation): Likewise.  Make it an RTL_PASS.
        * tree-phinodes.c (init_phinodes, fini_phinodes): Remove.
        * tree-ssa.c (init_tree_ssa): Do not call init_phinodes.
        (delete_tree_ssa): Do not call fini_phinodes.
        * tree-flow.h (init_phinodes, fini_phinodes): Remove.

2012-05-11  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR 53063
        * doc/options.texi (EnabledBy): Document
        * opts.c: Include opts.h and options.h before tm.h.
        (finish_options): Do not handle some sub-options here...
        (common_handle_option): ... instead call common_handle_option_auto
        here.
        * optc-gen.awk: Handle EnabledBy.
        * opth-gen.awk: Declare common_handle_option_auto.
        * common.opt (Wuninitialized): Use EnabledBy. Delete Init.
        (Wmaybe-uninitialized): Likewise.
        (Wunused-but-set-variable): Likewise.
        (Wunused-function): Likewise.
        (Wunused-label): Likewise.
        (Wunused-value): Likewise.
        (Wunused-variable): Likewise.
        * opt-read.awk: Create opt_numbers array.

2012-05-11  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53295
        * tree-data-ref.h (stride_of_unit_type_p): Handle non-constant
        strides.
        * tree-data-ref.c (dr_analyze_innermost): Allow non-constant
        strides when analyzing data-references in a loop context.
        * tree-vect-data-refs.c (vect_mark_for_runtime_alias_test): Reject
        non-constant strides for now.
        (vect_enhance_data_refs_alignment): Ignore data references
        that are strided loads.
        (vect_analyze_data_ref_access): Handle non-constant strides.
        (vect_check_strided_load): Verify the data-reference is a load.
        (vect_analyze_data_refs): Restructure to make strided load
        support not dependent on gather support.
        * tree-vect-stmts.c (vectorizable_load): Avoid useless work
        when doing strided or gather loads.
        * tree-vect-loop-manip.c (vect_vfa_segment_size): Use
        integer_zerop to compare stride with zero.

2012-05-11  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/driver-i386.c (host_detect_local_cpu): Support RTM.

2012-05-11  Jan Hubicka  <jh@suse.cz>

        PR bootstrap/53300
        * varpool.c (varpool_assemble_decl): Also output constat pool entries
        that output_constant_pool missed.

2012-05-11  Mingjie Xing  <mingjie.xing@gmail.com>

        * config/mips/t-vxworks: Change MUTLILIB_EXTRA_OPTS to
        MULTILIB_EXTRA_OPTS.

2012-05-11  Uros Bizjak  <ubizjak@gmail.com>

        PR target/53291
        * config/i386/i386.md (xtest): Use NE condition in ix86_expand_setcc.

2012-05-11  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*movti_internal_rex64): Avoid MOVAPS size
        optimization for TARGET_AVX.
        (*movti_internal_sse): Ditto.
        (*movdi_internal_rex64): Handle TARGET_SSE_PACKED_SINGLE_INSN_OPTIMAL.
        (*movdi_internal): Ditto.
        (*movsi_internal): Ditto.
        (*movtf_internal): Avoid MOVAPS size optimization for TARGET_AVX.
        (*movdf_internal_rex64): Ditto.
        (*movfd_internal): Ditto.
        (*movsf_internal): Ditto.
        * config/i386/sse.md (mov<mode>): Handle TARGET_SSE_LOAD0_BY_PXOR.

2012-05-10  Eric Botcazou  <ebotcazou@adacore.com>

        * dwarf2out.c (add_byte_size_attribute) <RECORD_TYPE>: Handle variable
        reference as size attribute.

2012-05-10  Eric Botcazou  <ebotcazou@adacore.com>
            Tristan Gingold  <gingold@adacore.com>

        * doc/md.texi (Standard Names): Document probe_stack_address.
        * explow.c (emit_stack_probe): Handle probe_stack_address.
        * config/ia64/ia64.md (UNSPECV_PROBE_STACK_ADDRESS): New constant.
        (UNSPECV_PROBE_STACK_RANGE): Likewise.
        (probe_stack_address): New insn.
        (probe_stack_range): Likewise.
        * config/ia64/ia64.c: Include common/common-target.h.
        (ia64_compute_frame_size): Mark r2 and r3 as used if static stack
        checking is enabled.
        (ia64_emit_probe_stack_range): New function.
        (output_probe_stack_range): Likewise.
        (ia64_expand_prologue): Invoke ia64_emit_probe_stack_range if static
        builtin stack checking is enabled.
        (rtx_needs_barrier) <UNSPEC_VOLATILE>: Handle UNSPECV_PROBE_STACK_RANGE
        and UNSPECV_PROBE_STACK_ADDRESS.
        (unknown_for_bundling_p): New predicate.
        (group_barrier_needed): Use important_for_bundling_p.
        (ia64_dfa_new_cycle): Use unknown_for_bundling_p.
        (issue_nops_and_insn): Likewise.
        (bundling): Likewise.
        (final_emit_insn_group_barriers): Likewise.
        * config/ia64/ia64-protos.h (output_probe_stack_range): Declare.
        * config/ia64/hpux.h (STACK_CHECK_STATIC_BUILTIN): Define.
        (STACK_CHECK_PROTECT): Likewise.
        * config/ia64/linux.h (STACK_CHECK_STATIC_BUILTIN): Likewise.

2012-05-10  Jan Hubicka  <jh@suse.cz>

        * ipa-inline.c (update_all_callee_keys): Remove.
        (inline_small_functions): Simplify priority updating.

2012-05-10  Jan Hubicka  <jh@suse.cz>

        * ipa.c (symtab_remove_unreachable_nodes): Fix marking of clones.

2012-05-10  Jan Hubicka  <jh@suse.cz>

        * cgraph.h (cgraph_remove_unreachable_nodes): Rename to ...
        (symtab_remove_unreachable_nodes): ... this one.
        * ipa-cp.c (ipcp_driver): Do not remove unreachable nodes.
        * cgraphunit.c (ipa_passes): Update.
        * cgraphclones.c (cgraph_materialize_all_clones): Update.
        * cgraph.c (cgraph_release_function_body): Only turn initial
        into error mark when initial was previously set.
        * ipa-inline.c (ipa_inline): Update.
        * ipa.c: Include ipa-inline.h
        (enqueue_cgraph_node, enqueue_varpool_node): Remove.
        (enqueue_node): New function.
        (process_references): Update.
        (symtab_remove_unreachable_nodes): Cleanup.
        * passes.c (execute_todo, execute_one_pass): Update.

2012-05-10  Vladimir Makarov  <vmakarov@redhat.com>

        PR rtl-optimization/53125
        * ira.c (ira): Call find_moveable_pseudos and
        move_unallocated_pseudos if only ira_conflicts_p is true.

2012-05-10  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*movoi_internal_avx): Handle
        TARGET_SSE_PACKED_SINGLE_INSN_OPTIMAL and TARGET_SSE_TYPELESS_STORES.
        (*movti_internal_rex64): Handle TARGET_SSE_PACKED_SINGLE_INSN_OPTIMAL.
        (*movti_internal_sse): Ditto.
        (*movtf_internal): Ditto.
        * config/i386/sse.md (ssePSmode): New mode attribute.
        (*move<mode>_internal): Use ssePSmode.
        (*<sse>_movu<ssemodesuffix><avxsizesuffix>): Ditto.
        (*<sse2>_movdqu<avxsizesuffix>): Ditto.
        * config/i386/i386.c (standard_sse_constant_opcode): Do not handle
        TARGET_SSE_PACKED_SINGLE_INSN_OPTIMAL here.

2012-05-10  Eric Botcazou  <ebotcazou@adacore.com>

        * gimplify.c (gimplify_decl_expr): For a TYPE_DECL, also gimplify the
        DECL_ORIGINAL_TYPE if it is present.

2012-05-10  Nick Clifton  <nickc@redhat.com>

        PR target/53120
        * config/m32c/bitops.md (bset_qi): Change operand 2 from having
        a "0" constraint to being a (match_dup 0).

2012-05-10  Richard Guenther  <rguenther@suse.de>

        * stor-layout.c (byte_from_pos): Amend comment.

2012-05-10  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/extend.texi (X86 Built-in Functions, __builtin_cpu_init):
        Document requirement to call in constructors.

        * config/i386/i386.c: Update comments for i386-cpuinfo.c name change.

2012-05-10  Richard Guenther  <rguenther@suse.de>

        * tree.h (TYPE_IS_SIZETYPE): Remove.
        * fold-const.c (int_const_binop_1): Remove TYPE_IS_SIZETYPE use.
        (extract_muldiv_1): Likewise.
        * gimple.c (gtc_visit): Likewise.
        (gimple_types_compatible_p): Likewise.
        (iterative_hash_canonical_type): Likewise.
        (gimple_canonical_types_compatible_p): Likewise.
        * gimplify.c (gimplify_one_sizepos): Likewise.
        * print-tree.c (print_node): Likewise.
        * stor-layout.c (initialize_sizetypes): Do not set TYPE_IS_SIZETYPE.

2012-05-09  Uros Bizjak  <ubizjak@gmail.com>

        PR target/52908
        * config/i386/sse.md (vec_widen_smult_hi_v4si): Expand using
        xop_pmacsdqh insn pattern instead of xop_mulv2div2di3_high.
        (vec_widen_smult_lo_v4si): Expand using xop_pmacsdql insn pattern
        instead of xop_mulv2div2di3_low.
        (xop_p<macs>dql): Fix vec_select selector.
        (xop_p<macs>dqh): Ditto.
        (xop_mulv2div2di3_low): Remove insn_and_split pattern.
        (xop_mulv2div2di3_high): Ditto.

2012-05-09  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR c++/53289
        * diagnostic.h (diagnostic_context): Add last_location.
        * diagnostic.c (diagnostic_initialize): Initialize it.
        (diagnostic_show_locus): Use it.

2012-05-09  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        * doc/extend.texi (Function Attributes): Point xref to section
        about Pragmas.

2012-05-09  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (*movdf_internal_rex64): Remove
        TARGET_SSE_PACKED_SINGLE_INSN_OPTIMAL handling from asm output code.
        Calculate "mode" attribute according to
        TARGET_SSE_PACKED_SINGLE_INSN_OPTIMAL flag.
        (*movdf_internal): Ditto.

2012-05-09  Uros Bizjak  <ubizjak@gmail.com>

        PR target/44141
        * config/i386/i386.c (ix86_expand_vector_move_misalign): Do not handle
        128 bit vectors specially for TARGET_AVX.  Emit sse2_movupd and
        sse_movupd RTXes for TARGET_AVX, TARGET_SSE_PACKED_SINGLE_INSN_OPTIMAL
        or when optimizing for size.
        * config/i386/sse.md (*mov<mode>_internal): Remove
        TARGET_SSE_PACKED_SINGLE_INSN_OPTIMAL handling from asm output code.
        Calculate "mode" attribute according to optimize_function_for_size_p
        and TARGET_SSE_PACKED_SINGLE_INSN_OPTIMAL flag.
        (*<sse>_movu<ssemodesuffix><avxsizesuffix>): Choose asm template
        depending on the mode of the instruction.  Calculate "mode" attribute
        according to optimize_function_for_size_p, TARGET_SSE_TYPELESS_STORES
        and TARGET_SSE_PACKED_SINGLE_INSN_OPTIMAL flags.
        (*<sse2>_movdqu<avxsizesuffix>): Ditto.

2012-05-09  Georg-Johann Lay  <avr@gjlay.de>

        PR target/53256
        * config/avr/elf.h (ASM_DECLARE_FUNCTION_NAME): Remove.
        * config/avr/avr-protos.h (avr_asm_declare_function_name): Remove.
        * config/avr/avr.h (struct machine_function): Add attributes_checked_p.
        * config/avr/avr.c (avr_asm_declare_function_name): Remove.
        (expand_prologue): Move initialization of cfun->machine->is_naked,
        is_interrupt, is_signal, is_OS_task, is_OS_main from here to...
        (avr_set_current_function): ...this new static function.
        (TARGET_SET_CURRENT_FUNCTION): New define.
        (avr_function_ok_for_sibcall): Use cfun->machine->is_* instead of
        checking attributes of current_function_decl.
        (avr_regs_to_save): Ditto.
        (signal_function_p): Rename to avr_signal_function_p.
        (interrupt_function_p): Rename to avr_interrupt_function_p.

        * doc/extend.texi (Function Attributes): Better explanation of
        'interrupt' and 'signal' for AVR. Move 'ifunc' down to establish
        alphabetical order.

2012-05-09  Michael Matz  <matz@suse.de>

        PR tree-optimization/53185
        * tree-vect-data-refs.c (vect_enhance_data_refs_alignment): Disable
        peeling when we see strided loads.

2012-05-09  Matthias Klose  <doko@ubuntu.com>

        * gcc-ar.c (main): Don't check for execute bits for the plugin.

2012-05-09  Ramana Radhakrishnan  <ramana.radhakrishnan@linaro.org>

        * tree-ssa-loop-ivopts.c (add_autoinc_candidates, get_address_cost):
        Replace use of HAVE_{POST/PRE}_{INCREMENT/DECREMENT} with
        USE_{LOAD/STORE}_{PRE/POST}_{INCREMENT/DECREMENT} appropriately.
        * config/arm/arm.h (ARM_AUTOINC_VALID_FOR_MODE_P): New.
        (USE_LOAD_POST_INCREMENT): Define.
        (USE_LOAD_PRE_INCREMENT): Define.
        (USE_LOAD_POST_DECREMENT): Define.
        (USE_LOAD_PRE_DECREMENT): Define.
        (USE_STORE_PRE_DECREMENT): Define.
        (USE_STORE_PRE_INCREMENT): Define.
        (USE_STORE_POST_DECREMENT): Define.
        (USE_STORE_POST_INCREMENT): Define.
        (arm_auto_incmodes): Add enumeration.
        * config/arm/arm-protos.h (arm_autoinc_modes_ok_p): Declare.
        * config/arm/arm.c (arm_autoinc_modes_ok_p): Define.

2012-05-09  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/53226
        * tree-ssa-forwprop.c (ssa_forward_propagate_and_combine): Remove
        prev and prev_initialized vars, gimple_set_plf (stmt, GF_PLF_1, false)
        before processing it and gimple_set_plf (stmt, GF_PLF_1, true) if it
        doesn't need to be revisited, look for earliest stmt with
        !gimple_plf (stmt, GF_PLF_1) if something changed.

2012-05-09  Terry Guo  <terry.guo@arm.com>

        * genmultilib: Update copyright dates.
        * doc/fragments.texi: Ditto.

2012-05-09  Terry Guo  <terry.guo@arm.com>

        * Makefile.in (s-mlib): Add new argument MULTILIB_REQUIRED.
        * genmultilib (MULTILIB_REQUIRED): New.
        * doc/fragments.texi: Document the MULTILIB_REQUIRED.

2012-05-09  Richard Guenther  <rguenther@suse.de>

        * tree-vectorizer.h (vect_loop_versioning): Adjust prototype.
        (vect_do_peeling_for_loop_bound): Likewise.
        (vect_do_peeling_for_alignment): Likewise.
        * tree-vect-loop-manip.c (conservative_cost_threshold): Remove.
        (vect_do_peeling_for_loop_bound): Get check_profitability and
        threshold as parameters.
        (vect_do_peeling_for_alignment): Likewise.
        (vect_loop_versioning): Likewise.
        * tree-vect-loop.c (vect_transform_loop): Compute check_profitability
        and threshold here.  Control where to put the check here.

2012-05-09  Richard Sandiford  <rdsandiford@googlemail.com>

        PR middle-end/53249
        * dwarf2out.h (get_address_mode): Move declaration to...
        * rtl.h: ...here.
        * dwarf2out.c (get_address_mode): Move definition to...
        * rtlanal.c: ...here.
        * var-tracking.c (get_address_mode): Delete.
        * combine.c (find_split_point): Use get_address_mode instead of
        targetm.addr_space.address_mode.
        * cselib.c (cselib_record_sets): Likewise.
        * dse.c (canon_address, record_store): Likewise.
        * emit-rtl.c (adjust_address_1, offset_address): Likewise.
        * expr.c (move_by_pieces, emit_block_move_via_loop, store_by_pieces)
        (store_by_pieces_1, expand_assignment, store_expr, store_constructor)
        (expand_expr_real_1): Likewise.
        * ifcvt.c (noce_try_cmove_arith): Likewise.
        * optabs.c (maybe_legitimize_operand_same_code): Likewise.
        * reload.c (find_reloads): Likewise.
        * sched-deps.c (sched_analyze_1, sched_analyze_2): Likewise.
        * sel-sched-dump.c (debug_mem_addr_value): Likewise.

2012-05-09  Maciej W. Rozycki  <macro@codesourcery.com>

        * config/mips/mips.c (mips16_gp_pseudo_reg): Remove line
        information from the instruction produced.

2012-05-09  Richard Guenther  <rguenther@suse.de>

        * stor-layout.c (bit_from_pos): Document.
        (byte_from_pos): Likewise.  Optimize.
        (pos_from_bit): Likewise.
        (normalize_offset): Use pos_from_bit instead of replicating it.

2012-05-09  Alan Modra  <amodra@gmail.com>

        PR target/53271
        * config/rs6000/rs6000.c (gen_frame_set): New function.
        (gen_frame_load, gen_frame_store): New functions.
        (rs6000_savres_rtx): Use the above.
        (rs6000_emit_epilogue, rs6000_emit_prologue): Here too.
        Correct mode used for CR2 in save/restore_world patterns.
        Don't emit instructions for eh_return frame unwind reg info.

2012-05-08  Jan Hubicka  <jh@suse.cz>

        * cgraphbuild.c (build_cgraph_edges): Do not finalize vars
        with VALUE_EXPR.
        * cgraph.h (varpool_can_remove_if_no_refs): Vars with VALUE_EXPR
        are removable.
        * toplev.c (wrapup_global_declaration_2): Vars with VALUE_EXPR
        need to wrapup.
        (compile_file): Do not output variables.
        * cgraphbuild.c (varpool_finalize_decl): When var is finalized late,
        output it.
        * langhooks.c: Include timevar.h
        (write_global_declarations): Finalize compilation unit after wrapup;
        set timevars correctly.
        * passes.c (rest_of_decl_compilation): Decls with VALUE_EXPR needs
        not to be added to varpool.
        * varpool.c (varpool_assemble_decl): Sanity check that we are called
        only on cases where it makes sense; skip constant pool and value expr
        vars.

2012-05-08  David S. Miller  <davem@davemloft.net>

        * config/sparc/linux.h (LINK_SPEC): Don't pass "-Y" option.
        * config/sparc/linux64.h (LINK_ARCH32_SPEC): Likewise.
        * config/sparc/linux64.h (LINK_ARCH64_SPEC): Likewise.

2012-05-08  Richard Sandiford  <rdsandiford@googlemail.com>

        PR rtl-optimization/53278
        * lower-subreg.c (decompose_multiword_subregs): Remove left-over
        speed_p code from earlier patch.

2012-05-08  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/51244
        * config/sh/sh.md (*branch_true, *branch_false): New insns.

2012-05-08  Teresa Johnson  <tejohnson@google.com>

        * gcov-io.h (__gcov_reset, __gcov_dump): Declare.
        * doc/gcov.texi: Add note on using __gcov_reset and __gcov_dump.

2012-05-08  Jan Hubicka  <jh@suse.cz>

        * cgraph.c (cgraph_call_edge_duplication_hooks): Export.
        (cgraph_create_node_1): Rename to ...
        (cgraph_create_empty_node): ... this one; export.
        (cgraph_create_node): Update.
        (cgraph_set_call_stmt_including_clones): Move to cgraphclones.c
        (cgraph_create_edge_including_clones): Likewise.
        (cgraph_find_replacement_node): Likewise.
        (cgraph_clone_edge): Likewise.
        (cgraph_clone_node): Likewise.
        (clone_function_name): Likewise.
        (cgraph_create_virtual_clone): Likewise.
        (cgraph_remove_node_and_inline_clones): Likewise.
        (cgraph_redirect_edge_call_stmt_to_callee): Move here from cgraphunit.c
        * cgraph.h: Reorder declarations so they match file of origin.
        (cgraph_create_empty_node): Declare.
        * cgraphunit.c (update_call_expr): Move to cgraphclones.c
        (cgraph_copy_node_for_versioning): Likewise.
        (cgraph_function_versioning): Likewise.
        (cgraph_materialize_clone): Likewise.
        (cgraph_redirect_edge_call_stmt_to_callee): Likewise.
        (cgraph_materialize_all_clones): Likewise.
        * cgraphclones.c: New file.
        * Makefile.in: Update for cgraphclones.

2012-05-08  Uros Bizjak  <ubizjak@gmail.com>

        PR target/53176
        * config/i386/i386.c (ix86_set_reg_reg_cost): New function.
        (ix86_rtx_costs): Handle SET.

2012-05-08  Michael Matz  <matz@suse.de>

        * basic-block.h (struct rtl_bb_info): Remove visited member and
        move head_ member to ...
        (struct basic_block_def.basic_block_il_dependent): ... the new
        member x, replacing but containing old member rtl.
        (enum bb_flags): New BB_VISITED flag.
        (BB_HEADER, BB_FOOTER): New macros.

        * jump.c (mark_all_labels): Adjust.
        * cfgcleanup.c (try_optimize_cfg): Adjust.
        * cfglayout.c (record_effective_endpoints): Adjust.
        (relink_block_chain): Ditto (and don't fiddle with visited).
        (fixup_reorder_chain): Adjust.
        (fixup_fallthru_exit_predecessor): Ditto.
        (cfg_layout_duplicate_bb): Ditto.
        * combine.c (update_cfg_for_uncondjump): Adjust.
        * bb-reorder.c (struct bbro_basic_block_data_def): Add visited member.
        (bb_visited_trace): New accessor.
        (mark_bb_visited): Move in front.
        (rotate_loop): Use bb_visited_trace.
        (find_traces_1_round): Ditto.
        (emit_barrier_after): Ditto.
        (copy_bb): Ditto, and initialize visited on resize.
        (reorder_basic_blocks): Initize visited member.
        (duplicate_computed_gotos): Clear bb flags at start, use
        BB_VISITED flags.

        * cfgrtl.c (try_redirect_by_replacing_jump): Adjust.
        (rtl_verify_flow_info_1): Ditto.
        (cfg_layout_split_block): Ditto.
        (cfg_layout_delete_block): Ditto.
        (cfg_layout_merge_blocks): Ditto.
        (init_rtl_bb_info): Adjust and initialize il.x.head_ member.

2012-05-08  Hans-Peter Nilsson  <hp@axis.com>

        PR target/53272
        * config/cris/cris.c (cris_normal_notice_update_cc): For TARGET_V32,
        when a constant source operand matches an "I" constraint, the "no
        CC0 change" applies to a register-destination only, not a
        strict_low_part-destination.

2012-05-08  Richard Guenther  <rguenther@suse.de>

        * fold-const.c (fold_binary_loc): Fold (X * CST1) & CST2
        to zero or to (X * CST1) & CST2' when CST1 has trailing zeros.

2012-05-08  Georg-Johann Lay  <avr@gjlay.de>

        * Makefile.in (TEXI_GCC_FILES): Add avr-mmcu.texi.

        * doc/avr-mmcu.texi: New auto-generated file.
        * doc/invoke.texi (AVR Options): Include avr-mmcu.texi in order
        to document all valid -mmcu= arguments.

        * config/avr/avr.h (arch_info_s): New struct definition.
        * config/avr/avr-devices.c (avr_texinfo): New variable.
        * config/avr/gen-avr-mmcu-texi.c: New file.
        * config/avr/t-avr: New rules and dependencies to build avr-mmcu.texi.

2012-05-08  Dehao Chen  <dehao@google.com>

        * predict.c (find_qualified_ssa_name): New.
        (find_ssa_name_in_expr): New.
        (find_ssa_name_in_assign_stmt): New.
        (is_comparison_with_loop_invariant_p): New.
        (is_bound_expr_similar): New.
        (predict_iv_comparison): New.
        (predict_loops): Add heuristic for loop-nested branches that compare an
        induction variable to a loop bound variable.
        * predict.def (PRED_LOOP_IV_COMPARE): New macro.

2012-05-08  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (has_dispatch): Use TARGET_BDVER1 and
        TARGET_BDVER2 defines where appropriate.

2012-05-07  Eric Botcazou  <ebotcazou@adacore.com>

        * configure.ac (PLUGIN_LD): Rename into...
        (PLUGIN_LD_SUFFIX): ...this and strip the target_alias triplet.
        * config.in: Regenerate.
        * configure: Likewise.
        * collect2.c (main): Set plugin_ld_suffix to PLUGIN_LD_SUFFIX.

2012-05-07  Eric Botcazou  <ebotcazou@adacore.com>

        * tree-dfa.c (get_ref_base_and_extent) <ARRAY_REF>: Do the offset
        computation using the precision of the index type.
        * gimple-fold.c (fold_const_aggregate_ref_1) <ARRAY_REF>: Likewise.
        (fold_array_ctor_reference): Do index computations in the index type.

2012-05-07  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.c (avr_prologue_setup_frame): Fix mode passed
        down to plus_constant.
        (expand_epilogue): Ditto.

2012-05-07  Steven Bosscher  <steven@gcc.gnu.org>

        * postreload.c (reload_cse_regs): Make static.
        * reload.h (reload_cse_regs): Remove prototype.

2012-05-07  Richard Henderson  <rth@redhat.com>

        * config/alpha/alpha.md (clear_cache): New pattern.

2012-05-07  Steven Bosscher  <steven@gcc.gnu.org>

        PR middle-end/53245
        * gimplify.c (preprocess_case_label_vec_for_gimple): If low or high
        is folded to a type boundary value, verify that the resulting case
        label is still a care range.

2012-05-07  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (ctz<mode>2): Emit rep;bsf
        only for TARGET_GENERIC, when not optimizing for size.
        (*ffs<mode>_1): Ditto.

2012-05-07  Steven Bosscher  <steven@gcc.gnu.org>

        * tree-cfg.c (verify_gimple_switch): Tighten checks.

2012-05-07  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/53239
        * tree-vrp.c (get_value_range): Set VR of SSA_NAME_IS_DEFAULT_DEF
        of DECL_BY_REFERENCE RESULT_DECL to nonnull.

2012-05-07  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53195
        * tree-inline.c (setup_one_parameter): Properly add referenced
        vars from the parameters new known value.

2012-05-07  Steven Bosscher  <steven@gcc.gnu.org>

        * config/m68k/m68k.c (m68k_sched_branch_type): Remove.
        (sched_branch_type): Remove.
        (m68k_sched_md_init_global): Don't allocate it.
        (m68k_sched_md_finish_global): Don't free it.
        * config/m68k/m68k.h (m68k_sched_branch_type): Remove prototype.
        * config/m68k/m68k.md: Set the type of insns using
        m68k_sched_branch_type to bcc directly.

2012-05-07  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config/sol2.c (solaris_override_options): New function.
        * config/sol2-protos.h (solaris_override_options): Declare.
        * config/sol2.h (SUBTARGET_OVERRIDE_OPTIONS): Define.

2012-05-07  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-loop-prefetch.c (determine_loop_nest_reuse): Return
        whether we failed to compute data dependences.
        (loop_prefetch_arrays): Fail if we failed.

2012-05-07  Uros Bizjak  <ubizjak@gmail.com>
            Paolo Bonzini  <bonzini@gnu.org>

        * config/i386/i386.md (ctz<mode>2): Emit rep;bsf even for !TARGET_BMI.
        Emit bsf when optimizing for size.
        (*ffs<mode>_1): Ditto.

2012-05-07  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/53250
        * config/sh/sh.c (sh_rtx_costs): Handle SET.

2012-05-06  Uros Bizjak  <ubizjak@gmail.com>

        PR target/53227
        * config/i386/i386.md (swap<mode>): Rename from *swap<mode>.
        (bswapdi2): Split from bswap<mode>2.  Use nonnimediate_operand
        predicate for operand 1.  Force operand 1 to register for TARGET_BSWAP.
        (bswapsi2): Ditto.
        (*bswapdi2_doubleword): New insn pattern.
        (*bswap<mode>2): Rename from *bswap<mode>2_1.

2012-05-06  Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/mips.c (mips_set_reg_reg_piece_cost): New function.
        (mips_set_reg_reg_cost): Likewise.
        (mips_rtx_costs): Handle SET.

2012-05-06  Richard Sandiford  <rdsandiford@googlemail.com>

        * lower-subreg.c (shift_cost): Use set_src_cost, avoiding the SET.
        (compute_costs): Likewise for the zero extension.  Use set_rtx_cost
        to compute the cost of moves.  Set the mode of the target register.

2012-05-05  Richard Sandiford  <rdsandiford@googlemail.com>

        * rtl.h (plus_constant, plus_constant_mode): Merge into a single
        plus_constant function.
        * explow.c (plus_constant, plus_constant_mode): Likewise.  Assert
        that the mode is sensible.
        (use_anchored_address, round_push, allocate_dynamic_stack_space)
        (probe_stack_range, anti_adjust_stack_and_probe): Update calls to
        plus_constant.

        * alias.c (canon_rtx): Likewise.
        (init_alias_analysis): Likewise.
        * builtins.c (expand_builtin_return_addr)
        (expand_builtin_setjmp_setup, expand_builtin_longjmp)
        (expand_builtin_nonlocal_goto, expand_builtin_update_setjmp_buf)
        (expand_builtin_apply_args_1, expand_builtin_apply, expand_movstr)
        (expand_builtin_stpcpy): Likewise.
        * calls.c (save_fixed_argument_area, restore_fixed_argument_area)
        (compute_argument_addresses, internal_arg_pointer_based_exp)
        (expand_call, emit_library_call_value_1): Likewise.
        * cfgexpand.c (expand_one_stack_var_at, expand_debug_expr): Likewise.
        * combine-stack-adj.c (try_apply_stack_adjustment): Likewise.
        * combine.c (combine_simplify_rtx, force_to_mode): Likewise.
        * cse.c (insert_const_anchor, find_reg_offset_for_const)
        (use_related_value, fold_rtx): Likewise.
        * cselib.c (cselib_subst_to_values): Likewise.
        * dse.c (record_store, check_mem_read_rtx): Likewise.
        * dwarf2out.c (rtl_for_decl_location, gen_variable_die): Likewise.
        * emit-rtl.c (adjust_address_1): Likewise.
        * except.c (sjlj_emit_function_enter)
        (expand_builtin_extract_return_addr)
        (expand_builtin_frob_return_addr): Likewise.
        * expmed.c (expand_divmod): Likewise.
        * expr.c (move_by_pieces, store_by_pieces, store_by_pieces_1)
        (emit_move_resolve_push, push_block, emit_push_insn, store_expr)
        (expand_expr_addr_expr_1, expand_expr_real_1): Likewise.
        * function.c (assign_stack_local_1)
        (instantiate_virtual_regs_in_rtx): Likewise.
        * optabs.c (prepare_cmp_insn): Likewise.
        * recog.c (offsettable_address_addr_space_p): Likewise.
        * reload.c (find_reloads_address, form_sum)
        (find_reloads_subreg_address): Likewise.
        * reload1.c (init_reload, eliminate_regs_1)
        (eliminate_regs_in_insn): Likewise.
        * simplify-rtx.c (simplify_unary_operation_1)
        (simplify_binary_operation_1, simplify_plus_minus): Likewise.
        * var-tracking.c (compute_cfa_pointer, prepare_call_arguments)
        (vt_add_function_parameter): Likewise.

        * config/alpha/alpha.h (EH_RETURN_HANDLER_RTX): Likewise.
        * config/alpha/vms.h (EH_RETURN_HANDLER_RTX): Likewise.
        * config/alpha/alpha.c (alpha_legitimize_address_1)
        (get_unaligned_address, alpha_expand_unaligned_load)
        (alpha_expand_unaligned_store, alpha_expand_unaligned_load_words)
        (alpha_expand_unaligned_store_words, alpha_expand_block_clear)
        (alpha_expand_builtin_establish_vms_condition_handler)
        (alpha_setup_incoming_varargs, emit_frame_store_1)
        (alpha_expand_prologue, alpha_expand_epilogue)
        (alpha_use_linkage): Likewise.
        * config/alpha/alpha.md: Likewise.

        * config/arm/arm.c (arm_trampoline_init, legitimize_pic_address)
        (arm_load_pic_register, arm_pic_static_addr, arm_legitimize_address)
        (thumb_legitimize_address, arm_gen_load_multiple_1)
        (arm_gen_store_multiple_1, arm_gen_multiple_op, gen_ldm_seq)
        (gen_stm_seq, gen_const_stm_seq, arm_block_move_unaligned_straight)
        (arm_block_move_unaligned_loop, arm_gen_movmemqi, arm_reload_in_hi)
        (arm_reload_out_hi, arm_reorg, vfp_emit_fstmd, emit_multi_reg_push)
        (emit_sfm, thumb_set_frame_pointer, arm_expand_prologue)
        (thumb1_emit_multi_reg_push, thumb1_expand_prologue)
        (thumb_expand_movmemqi, arm_set_return_address)
        (thumb_set_return_address): Likewise.
        * config/arm/arm.md: Likewise.

        * config/avr/avr.c (avr_incoming_return_addr_rtx)
        (avr_prologue_setup_frame, expand_epilogue)
        (avr_const_address_lo16): Likewise.

        * config/bfin/bfin.h (EH_RETURN_HANDLER_RTX): Likewise.
        * config/bfin/bfin.c (setup_incoming_varargs, bfin_load_pic_reg)
        (bfin_expand_prologue, bfin_trampoline_init, bfin_expand_call)
        (bfin_output_mi_thunk): Likewise.

        * config/c6x/c6x.c (c6x_initialize_trampoline)
        (c6x_output_mi_thunk): Likewise.

        * config/cr16/cr16.h (EH_RETURN_HANDLER_RTX): Likewise.
        * config/cr16/cr16.c (cr16_create_dwarf_for_multi_push): Likewise.

        * config/cris/cris.c (cris_return_addr_rtx, cris_split_movdx)
        (cris_expand_prologue, cris_expand_epilogue, cris_gen_movem_load)
        (cris_emit_movem_store, cris_trampoline_init): Likewise.
        * config/cris/cris.md: Likewise.

        * config/darwin.c (machopic_indirect_data_reference)
        (machopic_legitimize_pic_address): Likewise.

        * config/epiphany/epiphany.c (epiphany_emit_save_restore)
        (epiphany_expand_prologue, epiphany_expand_epilogue)
        (epiphany_trampoline_init): Likewise.
        * config/epiphany/epiphany.md: Likewise.

        * config/fr30/fr30.c (fr30_move_double): Likewise.

        * config/frv/frv.c (frv_dwarf_store, frv_expand_prologue)
        (frv_expand_block_move, frv_expand_block_clear, frv_return_addr_rtx)
        (frv_index_memory, unspec_got_name, frv_find_base_term)
        (frv_output_dwarf_dtprel): Likewise.

        * config/h8300/h8300.c (h8300_push_pop, h8300_return_addr_rtx)
        (h8300_swap_into_er6, h8300_swap_out_of_er6): Likewise.

        * config/i386/i386.h (RETURN_ADDR_RTX): Likewise.
        * config/i386/i386.c (setup_incoming_varargs_64)
        (setup_incoming_varargs_ms_64, choose_baseaddr)
        (ix86_emit_save_reg_using_mov, ix86_adjust_stack_and_probe)
        (ix86_emit_probe_stack_range, ix86_expand_prologue)
        (ix86_emit_restore_reg_using_pop, ix86_emit_leave)
        (ix86_expand_epilogue, legitimize_pic_address, ix86_legitimize_address)
        (ix86_split_long_move, ix86_expand_movmem, ix86_expand_setmem)
        (ix86_static_chain, ix86_trampoline_init, x86_this_parameter)
        (x86_output_mi_thunk): Likewise.
        * config/i386/i386.md: Likewise.

        * config/ia64/ia64.c (ia64_expand_load_address)
        (ia64_expand_tls_address, ia64_expand_move, ia64_split_tmode)
        (do_spill, ia64_trampoline_init): Likewise.

        * config/iq2000/iq2000.c (iq2000_va_start)
        (iq2000_emit_frame_related_store, iq2000_expand_prologue)
        (iq2000_expand_eh_return, iq2000_setup_incoming_varargs)
        (iq2000_print_operand, iq2000_legitimize_address): Likewise.

        * config/lm32/lm32.c (lm32_setup_incoming_varargs): Likewise.

        * config/m32c/m32c.c (m32c_return_addr_rtx)
        (m32c_expand_insv): Likewise.

        * config/m32r/m32r.c (m32r_setup_incoming_varargs)
        (m32r_legitimize_pic_address, m32r_print_operand)
        (m32r_print_operand_address): Likewise.

        * config/m68k/linux.h (FINALIZE_TRAMPOLINE): Likewise.
        * config/m68k/m68k.h (RETURN_ADDR_RTX): Likewise.
        (EH_RETURN_HANDLER_RTX): Likewise.
        * config/m68k/m68k.c (m68k_emit_movem, m68k_expand_prologue)
        (m68k_expand_epilogue, legitimize_pic_address)
        (m68k_output_mi_thunk): Likewise.
        * config/m68k/m68k.md: Likewise.

        * config/mcore/mcore.c (mcore_expand_prolog): Likewise.
        (mcore_expand_epilog): Likewise.
        * config/mcore/mcore.md: Likewise.

        * config/mep/mep.c (mep_allocate_initial_value)
        (mep_expand_prologue, mep_expand_epilogue): Likewise.

        * config/microblaze/microblaze.c (double_memory_operand)
        (microblaze_block_move_loop): Likewise.

        * config/mips/mips.c (mips_strip_unspec_address, mips_add_offset)
        (mips_setup_incoming_varargs, mips_va_start, mips_block_move_loop)
        (mips_print_operand, mips16e_save_restore_reg, mips_save_restore_reg)
        (mips_expand_prologue, mips_epilogue_set_cfa)
        (mips_expand_epilogue): Likewise.
        * config/mips/mips.md: Likewise.

        * config/mmix/mmix.c (mmix_dynamic_chain_address, mmix_return_addr_rtx)
        (mmix_expand_prologue, mmix_expand_epilogue): Likewise.

        * config/mn10300/mn10300.c (mn10300_gen_multiple_store)
        (mn10300_builtin_saveregs, mn10300_trampoline_init): Likewise.

        * config/moxie/moxie.h (INCOMING_RETURN_ADDR_RTX): Likewise.
        (EH_RETURN_HANDLER_RTX): Likewise.
        * config/moxie/moxie.c (moxie_static_chain): Likewise.

        * config/pa/pa.c (legitimize_pic_address, hppa_legitimize_address)
        (store_reg, set_reg_plus_d, pa_expand_prologue, load_reg)
        (pa_return_addr_rtx, hppa_builtin_saveregs)
        (pa_trampoline_init): Likewise.
        * config/pa/pa.md: Likewise.

        * config/pdp11/pdp11.c (pdp11_expand_epilogue): Likewise.

        * config/picochip/picochip.c (picochip_static_chain): Likewise.

        * config/rs6000/rs6000.h (RS6000_SAVE_TOC): Likewise.
        * config/rs6000/rs6000.c (rs6000_legitimize_address)
        (setup_incoming_varargs, print_operand, rs6000_return_addr)
        (rs6000_emit_eh_reg_restore, rs6000_emit_probe_stack_range)
        (rs6000_emit_epilogue)
        (rs6000_machopic_legitimize_pic_address): Likewise.

        * config/rx/rx.c (gen_rx_rtsd_vector, gen_rx_popm_vector): Likewise.

        * config/s390/s390.h (INITIAL_FRAME_ADDRESS_RTX): Likewise.
        (DYNAMIC_CHAIN_ADDRESS): Likewise.
        * config/s390/s390.c (s390_decompose_address, legitimize_pic_address)
        (s390_delegitimize_address, print_operand, annotate_constant_pool_refs)
        (replace_constant_pool_ref, s390_return_addr_rtx, s390_back_chain_rtx)
        (save_fpr, restore_fpr, save_gprs, restore_gprs, s390_emit_prologue)
        (s390_emit_epilogue, s390_function_profiler): Likewise.
        * config/s390/s390.md: Likewise.

        * config/score/score.c (score_add_offset, score_prologue): Likewise.

        * config/sh/sh.c (expand_block_move, push_regs, sh_builtin_saveregs)
        (sh_output_mi_thunk): Likewise.
        * config/sh/sh.md: Likewise.

        * config/sparc/sparc.h (DYNAMIC_CHAIN_ADDRESS, FRAME_ADDR_RTX)
        (RETURN_ADDR_RTX, INCOMING_RETURN_ADDR_RTX): Likewise.
        * config/sparc/sparc.c (sparc_legitimize_pic_address)
        (sparc_emit_probe_stack_range, emit_save_or_restore_regs)
        (emit_window_save, sparc_flat_expand_prologue, sparc_struct_value_rtx)
        (emit_and_preserve): Likewise.
        * config/sparc/sparc.md: Likewise.

        * config/spu/spu.h (DYNAMIC_CHAIN_ADDRESS): Likewise.
        * config/spu/spu.c (spu_expand_insv, spu_machine_dependent_reorg)
        (spu_setup_incoming_varargs, ea_load_store_inline)
        (spu_expand_load): Likewise.

        * config/stormy16/stormy16.c (xstormy16_expand_prologue)
        (combine_bnp): Likewise.

        * config/tilegx/tilegx.h (DYNAMIC_CHAIN_ADDRESS): Likewise.
        * config/tilegx/tilegx.c (tilegx_setup_incoming_varargs)
        (tilegx_expand_unaligned_load, tilegx_trampoline_init): Likewise.

        * config/tilepro/tilepro.h (DYNAMIC_CHAIN_ADDRESS): Likewise.
        * config/tilepro/tilepro.c (tilepro_setup_incoming_varargs)
        (tilepro_expand_unaligned_load, tilepro_trampoline_init): Likewise.

        * config/v850/v850.c (expand_prologue, expand_epilogue): Likewise.
        * config/v850/v850.md: Likewise.

        * config/vax/elf.h (EH_RETURN_STACKADJ_RTX): Likewise.
        (EH_RETURN_HANDLER_RTX): Likewise.
        * config/vax/vax.h (DYNAMIC_CHAIN_ADDRESS, RETURN_ADDR_RTX): Likewise.
        * config/vax/vax.c (vax_add_reg_cfa_offset, vax_expand_prologue)
        (print_operand_address, vax_trampoline_init): Likewise.

        * config/xtensa/xtensa.c (xtensa_expand_prologue, xtensa_return_addr)
        (xtensa_function_value_regno_p): Likewise.

2012-05-04  Andrew Pinski  <apinski@cavium.com>

        * expr.c (get_def_for_expr_class): New function.
        (convert_tree_comp_to_rtx): New function.
        (expand_cond_expr_using_cmove): New function.
        (expand_expr_real_2 <case COND_EXPR>): Call
        expand_cond_expr_using_cmove first and return if it succeeds.
        Remove the check for HAVE_conditional_move since we should have
        already converted it to a conditional move.
        * config/i386/i386.c (ix86_expand_int_movcc): Disallow comparison
        modes of DImode for 32bits and TImode.

2012-05-04  Steven Bosscher  <steven@gcc.gnu.org>

        PR other/29442
        * read-md.c (fprint_md_ptr_loc, fprint_c_condition): New functions.
        (print_md_ptr_loc, print_c_condition): Use them.
        * read-md.h (fprint_md_ptr_loc, fprint_c_condition): New prototypes.
        * genattrtab.c (attr_file_name, dfa_file_name, latency_file_name,
        attr_file, dfa_file, latency_file): New global variables.
        (write_attr_valueq, write_attr_set, write_attr_case, write_attr_value,
        write_upcase, write_indent, write_length_unit_log, write_test_expr,
        write_attr_get, write_insn_cases, write_eligible_delay,
        write_const_num_delay_slots): Accept FILE pointer and toss it around.
        Update all callers.
        (write_header, open_outfile, handle_arg): New funcions.
        (make_automaton_attrs): Write prototypes as extern to the output
        files.
        (main): Use init_rtx_reader_args_cb with handle_arg to take 3 file
        names from the command line.  Open the output files and write out
        internal functions for DFA functions to dfa_file_name, insn latency
        functions to latency_file_name, and everything else to attr_file.
        * Makefile.in (OBJS): Add insn-dfatab.o and insn-latencytab.o.
        (BACKEND): Build libbackend first.
        (MOSTLYCLEANFILES): Add insn-dfatab.c and insn-latencytab.c.
        (.PRECIOUS): Likewise.
        (insn-dfatab.o): New rule.
        (insn-latencytab.o): New rule.
        (simple_rtl_generated_c): Do not include insn-attrtab.c.
        (s-attrtab): New rule.

2012-05-04  Steven Bosscher  <steven@gcc.gnu.org>

        * rtl.def (ATTR_FLAG): Remove probability indicating flags.
        * genattr.c (main): Remove ATTR_FLAG_likely, ATTR_FLAG_unlikely,
        ATTR_FLAG_very_likely, and ATTR_FLAG_very_unlikely.
        * reorg.c (get_jump_flags): Do not set the removed flags.

        * doc/md.texi (attr_flag): Update for abovementioned changes.

2012-05-04  Uros Bizjak  <ubizjak@gmail.com>

        PR target/53228
        * config/i386/i386.h (X86_ARCH_CMOV): Rename from X86_ARCH_CMOVE.
        (TARGET_CMOV): Rename from TARGET_CMOVE.
        (TARGET_CMOVE): New define.
        * config/i386/i386.c (ix86_option_override_internal): Use TARGET_CMOV.
        Do not set TARGET_CMOVE here.

2012-05-04  Dodji Seketeli  <dodji@redhat.com>

        Enable -Wunused-local-typedefs when -Wall or -Wunused is on
        * opts.c (finish_options): Activate -Wunused-local-typedefs if
        -Wunused is activated.
        * doc/invoke.texi: Update blurb of -Wunused-local-typedefs.

2012-05-04  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * config/s390/s390.md (*movmem_short, *clrmem_short)
        (*cmpmem_short): Move the mode check from the insn condition to
        the match_scratch.

2012-05-04  Ulrich Weigand  <ulrich.weigand@linaro.org>

        PR tree-optimization/52633
        * tree-vect-patterns.c (vect_vect_recog_func_ptrs): Swap order of
        vect_recog_widen_shift_pattern and vect_recog_over_widening_pattern.
        (vect_recog_over_widening_pattern): Remove handling of code that was
        already detected as over-widening pattern.  Remove special handling
        of "unsigned" cases.  Instead, support general case of conversion
        of the shift result to another type.

2012-05-04  Ulrich Weigand  <ulrich.weigand@linaro.org>

        * tree-vect-patterns.c (vect_single_imm_use): New function.
        (vect_recog_widen_mult_pattern): Use it instead of open-coding loop.
        (vect_recog_over_widening_pattern): Likewise.
        (vect_recog_widen_shift_pattern): Likewise.

2012-05-04  Ulrich Weigand  <ulrich.weigand@linaro.org>

        * tree-vect-patterns.c (vect_same_loop_or_bb_p): New function.
        (vect_handle_widen_op_by_const): Use it instead of open-coding test.
        (vect_recog_widen_mult_pattern): Likewise.
        (vect_operation_fits_smaller_type): Likewise.
        (vect_recog_over_widening_pattern): Likewise.
        (vect_recog_widen_shift_pattern): Add to vect_same_loop_or_bb_p test.

2012-05-04  Richard Guenther  <rguenther@suse.de>

        PR lto/50602
        * lto-wrapper.c (merge_and_complain): Complain about mismatches
        of -freg-struct-return and -fpcc-struct-return.
        (run_gcc): Pass through -freg-struct-return and -fpcc-struct-return
        from the input file options and ignore those from the link
        command line.

2012-05-04  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53168
        * tree-ssa-pre.c (phi_translate_1): Only handle type-punned
        memory reads when the result is a constant we can pun.

2012-05-04  Richard Guenther  <rguenther@suse.de>

        * common.opt (flto-report): Do not mark as Optimization.

2012-05-04  Eric Botcazou  <ebotcazou@adacore.com>

        PR target/48496
        * recog.c (constrain_operands): If extra constraints are present, also
        accept pseudo-registers with equivalent memory locations during reload.

2012-05-04  Olivier Hainque  <hainque@adacore.com>

        * collect2.c (may_unlink_output_file): New global.
        (maybe_unlink): Honor it.
        * collect2.h: Add extern for it.
        * tlink.c (do_tlink): Set it to true if the link succeeded.

2012-05-04  Olivier Hainque  <hainque@adacore.com>

        * gcc.c (eval_spec_function): Finalize/restore the current string
        obstack state as part of the context push/pop operations.

2012-05-04  Bin Cheng  <bin.cheng@arm.com>

        PR rtl-optimization/52804
        * reload1.c (reload_reg_reaches_end_p): Check whether successor
        reload with type RELOAD_FOR_INPUT_ADDRESS kills reload register
        of current one with type RELOAD_FOR_INPADDR_ADDRESS.
        Same stands for reloads with type RELOAD_FOR_OUTPUT_ADDRESS and
        RELOAD_FOR_OUTADDR_ADDRESS.

2012-05-04  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR c++/24985
        * tree-diagnostic.c (maybe_unwind_expanded_macro_loc): Show caret
        for macro expansion.

2012-05-03  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        * flags.h (flag_permissive): Do not declare.
        * diagnostic.c (diagnostic_report_diagnostic): Handle fpermissive
        option specially.
        * toplev.c (flag_permissive): Do not define.
        * c-tree.h (system_header_p): Delete unused.

2012-05-03  David S. Miller  <davem@davemloft.net>

        PR target/52684
        * config/sparc/sparc.c (emit_soft_tfmode_libcall): If we pass a
        MEM directly into a libcall, mark it's MEM_EXPR as addressable.
        (sparc_emit_float_lib_cmp): Likewise.

2012-05-03  Michael Meissner  <meissner@linux.vnet.ibm.com>

        PR target/53199
        * config/rs6000/rs6000.md (bswapdi splitters): If
        -mavoid-indexed-addresses (or -mcpu=power6 which sets it by
        default) is used, generate an alternate sequence that does not
        depend on using indexed addressing.

2012-05-03  Jason Merrill  <jason@redhat.com>

        * gengtype.c (write_types): Fix warning message.
        (write_local): Likewise.

2012-05-02  Jason Merrill  <jason@redhat.com>

        * dwarf2out.c (struct external_ref, build_local_stub): New.
        (hash_external_ref, external_ref_eq, lookup_external_ref): New.
        (optimize_external_refs, optimize_external_refs_1): New.
        (change_AT_die_ref): New.
        (clone_as_declaration): Add DW_AT_signature when cloning a declaration.
        (build_abbrev_table): Take the external refs hashtable.
        (output_comp_unit): Get it from optimize_external_refs and pass it in.

2012-05-03  Jan Hubicka  <jh@suse.cz>

        PR middle-end/53093
        * tree-emutls.c (new_emutls_decl): Fix handling of aliases.

2012-05-03  Jan Hubicka  <jh@suse.cz>

        PR middle-end/53106
        * ipa.c (cgraph_remove_unreachable_nodes): Fix handling of clones.

2012-05-03  Jason Merrill  <jason@redhat.com>

        * dwarf2out.c (die_struct): Add comdat_type_p flag.  Use it instead of
        use_debug_types to discriminate the die_id union.
        (print_die, assign_symbol_names, copy_decls_walk): Likewise.
        (build_abbrev_table, output_die): Likewise.
        (prune_unused_types_walk_attribs): Likewise.
        (generate_type_signature, copy_declaration_context): Set it.
        (remove_child_or_replace_with_skeleton): Set it.
        (dwarf2out_start_source_file, dwarf2out_end_source_file): Don't
        check use_debug_types.
        (dwarf2out_finish): Do break_out_includes after .debug_types.

2012-05-03  Jason Merrill  <jason@redhat.com>

        * dwarf2out.c (modified_type_die): Use scope_die_for.
        (gen_type_die_with_usage, dwarf2out_finish): Likewise.
        (uses_local_type_r, uses_local_type): New.
        (scope_die_for): Keep a type that uses a local type in local scope.
        Use get_context_die for namespace and type scope.

2012-05-03  Jason Merrill  <jason@redhat.com>

        * config/i386/i386.c (ix86_code_end): Set DECL_IGNORED_P on the
        pc thunk.
        * dwarf2out.c (output_aranges): Skip DECL_IGNORED_P functions.
        (dwarf2out_finish): Likewise.

2012-05-03  Martin Jambor  <mjambor@suse.cz>

        * builtins.c (get_object_alignment_1): Return whether we can determine
        the alignment or conservatively assume byte alignment.  Return the
        alignment by reference.  Use get_pointer_alignment_1 for dereference
        alignment.
        (get_pointer_alignment_1): Return whether we can determine the
        alignment or conservatively assume byte alignment.  Return the
        alignment by reference.  Use get_ptr_info_alignment to get SSA name
        alignment.
        (get_object_alignment): Update call to get_object_alignment_1.
        (get_object_or_type_alignment): Likewise, fall back to type alignment
        only when it returned false.
        (get_pointer_alignment): Update call to get_pointer_alignment_1.
        * fold-const.c (get_pointer_modulus_and_residue): Update call to
        get_object_alignment_1.
        * ipa-prop.c (ipa_modify_call_arguments): Update call to
        get_pointer_alignment_1.
        * tree-sra.c (build_ref_for_offset): Likewise, fall back to the type
        of MEM_REF or TARGET_MEM_REF only when it returns false.
        * tree-ssa-ccp.c (get_value_from_alignment): Update call to
        get_object_alignment_1.
        (ccp_finalize): Use set_ptr_info_alignment.
        * tree.h (get_object_alignment_1): Update declaration.
        (get_pointer_alignment_1): Likewise.
        * gimple-pretty-print.c (dump_gimple_phi): Use get_ptr_info_alignment.
        (dump_gimple_stmt): Likewise.
        * tree-flow.h (ptr_info_def): Updated comments of fields align and
        misalign.
        (get_ptr_info_alignment): Declared.
        (mark_ptr_info_alignment_unknown): Likewise.
        (set_ptr_info_alignment): Likewise.
        (adjust_ptr_info_misalignment): Likewise.
        * tree-ssa-address.c (copy_ref_info): Use new access functions to get
        and set alignment of SSA names.
        * tree-ssa-loop-ivopts.c (rewrite_use_nonlinear_expr): Call
        mark_ptr_info_alignment_unknown.
        * tree-ssanames.c (get_ptr_info_alignment): New function.
        (mark_ptr_info_alignment_unknown): Likewise.
        (set_ptr_info_alignment): Likewise.
        (adjust_ptr_info_misalignment): Likewise.
        (get_ptr_info): Call mark_ptr_info_alignment_unknown.
        * tree-vect-data-refs.c (vect_create_addr_base_for_vector_ref):
        Likewise.
        (bump_vector_ptr): Likewise.
        * tree-vect-stmts.c (create_array_ref): Use set_ptr_info_alignment.
        (vectorizable_store): Likewise.
        (vectorizable_load): Likewise.

2012-05-03  Michael Matz  <matz@suse.de>

        * basic-block.h (struct rtl_bb_info, struct gimple_bb_info): Move
        in front of basic_block_def.
        (struct basic_block_def): Make il.gimple the full struct, not a
        pointer.
        (__assert_gimple_bb_smaller_rtl_bb): Asserting typedef.

        * cfgexpand.c (expand_gimple_basic_block): Clear all il.gimple members.
        * gimple-iterator.c (gimple_stmt_iterator): Don't special case
        NULL il.gimple, which can't happen anymore.
        * gimple.h (bb_seq): il.gimple can't be NULL.
        (bb_seq_add): Ditto.
        (set_bb_seq): Adjust.
        (gsi_start_bb, gsi_last_bb): Tidy.
        * lto-streamer-in.c (make_new_block): Don't zero members that
        are zeroed already, don't allocate a gimple_bb_info.
        * tree-cfg.c (create_bb): Don't allocate a gimple_bb_info.
        (remove_bb): Clear all il.gimple members.
        (gimple_verify_flow_info): Adjust for flat il.gimple.
        * tree-flow-inline.h (phi_nodes, phi_nodes_ptr, set_phi_nodes): Adjust.

        * coretypes.h (const_gimple_seq): Remove typedef.
        * gimple.h (gimple_seq_first): Take gimple_seq.
        (gimple_seq_first_stmt): Ditto.
        (gimple_seq_last): Ditto.
        (gimple_seq_last_stmt): Ditto.
        (gimple_seq_empty_p): Ditto.

2012-05-03  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-pre.c (valid_in_sets): Remove checking of trapping
        operations.
        (prune_clobbered_mems): Do it here.  Do not uselessly sort expressions.
        (compute_avail): Do not add possibly trapping operations to
        EXP_GEN if they might not be executed in the block.

2012-05-03  Uros Bizjak  <ubizjak@gmail.com>

        * config/alpha/elf.h (MAX_OFILE_ALIGNMENT): Remove.

2012-05-03  Steven Bosscher  <steven@gcc.gnu.org>

        * tree-switch-conversion.c (gen_inbound_check): Free post-dominance
        information as early as possible.  Update dominance info instead of
        discarding it.

2012-05-03  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-pre.c (debug_bitmap_sets_for): New function.
        (union_contains_value): Remove.
        (vro_valid_in_sets): Likewise.
        (op_valid_in_sets): New function.
        (valid_in_sets): Use op_valid_in_sets.
        (insert_into_preds_of_block): Move dumping ...
        (do_regular_insertion): ... here.
        (do_partial_partial_insertion): ... and here.  Dump that
        we've found a partial partial redundancy.
        (insert): Dump the current insert iteration.

2012-05-03  Jakub Jelinek  <jakub@redhat.com>

        PR plugins/53126
        * gcc-ar.c (main): If GCC_EXEC_PREFIX is set in env,
        append program name to it and pass that as first argument
        to make_relative_prefix.  Always pass standard_libexec_prefix
        as last argument to make_relative_prefix.  If
        make_relative_prefix returns NULL, fall back to
        standard_libexec_prefix.

        PR debug/53174
        * tree-predcom.c (remove_stmt): Call reset_debug_uses on stmts being
        removed.

        PR target/53187
        * config/arm/arm.c (arm_select_cc_mode): If x has MODE_CC class
        mode, return that mode.

        PR target/53194
        * config/i386/i386-c.c (ix86_target_macros_internal): Don't
        define __ATOMIC_HLE_* macros here.
        (ix86_target_macros): But here, using cpp_define_formatted.

2012-05-03  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53144
        * tree-ssa-sccvn.c (vn_reference_lookup_or_insert_constant_for_pieces):
        Rename to ...
        (vn_reference_lookup_or_insert_for_pieces): ... this.  Properly deal
        with SSA name values.
        (vn_reference_lookup_3): Adjust callers.

2012-05-03  Ganesh Gopalasubramanian  <Ganesh.Gopalasubramanian@amd.com>

        * config/i386/driver-i386.c (host_detect_local_cpu): Reset
        has_fma4 for AMD processors with both fma3 and fma4 support.

2012-05-03  Kirill Yukhin  <kirill.yukhin@intel.com>

        PR target/53201
        * config/i386/driver-i386.c (host_detect_local_cpu): Add space to
        "-mno-hle".

2012-05-03  Michael Matz  <matz@suse.de>

        PR bootstrap/53197
        * tree-ssa-dse.c (dse_optimize_stmt): Take pointer to iterator.
        (dse_enter_block): Properly iterate the whole sequence even
        if the last statement was removed.

2012-05-02  Steven Bosscher  <steven@gcc.gnu.org>

        * config/alpha/vms.h (SUBTARGET_OVERRIDE_OPTIONS): For pic code,
        unset flag_jump_tables.
        * stmt.c (expand_case): Remove special flag_pic case conditional
        on ASM_OUTPUT_ADDR_DIFF_ELT not being defined.

2012-05-02  Ulrich Weigand  <ulrich.weigand@linaro.org>

        * common/config/s390/s390-common.c (s390_option_optimization_table):
        Enable -fsched-pressure using -fsched-pressure-algorithm=model by
        default when optimizing.

2012-05-02  Martin Jambor  <mjambor@suse.cz>

        PR lto/52605
        * dwarf2out.c (dwarf2out_decl): Only lookup die representing context
        of a variable when the contect is a function.

2012-05-02  Michael Matz  <matz@suse.de>

        * coretypes.h (gimple_seq, const_gimple_seq): Typedef as gimple.
        * gimple.h (struct gimple_seq_node_d, struct gimple_seq_d): Remove.
        (const_gimple_seq_node): Remove.
        (gimple_seq_node): Typedef as gimple.
        (struct gimple_statement_base): Add next and prev members,
        adjust all WORD markers in using structs.
        (union gimple_statement_d): Link via gsbase.next field for GC and PCH.
        (gimple_seq_first, gimple_seq_first_stmt, gimple_seq_last,
        gimple_seq_last_stmt): Adjust as gimple_seq, gimple_seq_node and
        gimple are the same.
        (gimple_seq_set_last, gimple_seq_set_first): Don't allocate
        gimple_seq, adjust.
        (gimple_init_singleton): New function.
        (gsi_start_1, gsi_last_1, gsi_end_p, gsi_one_before_end_p): Adjust.
        (gsi_next, gsi_prev): Adjust, handle prev cyclic list correctly.
        (gsi_stmt): Adjust.
        (gsi_stmt_ptr): Remove.
        (enum gimple_alloc_kind): Remove gimple_alloc_kind_seq member.

        * gimple-iterator.c (update_bb_for_stmts): Take last parameter
        again, adjust for above changes.
        (update_call_edge_frequencies): Adjust for above changes.
        (gsi_insert_seq_nodes_before): Rewrite for new data structure.
        (gsi_insert_seq_nodes_after): Ditto.
        (gsi_split_seq_after): Ditto.
        (gsi_set_stmt): Ditto.
        (gsi_split_seq_before): Ditto.
        (gsi_remove): Ditto.
        (gsi_insert_seq_before_without_update): Don't free sequence.
        (gsi_insert_seq_after_without_update): Ditto.
        (gsi_replace): Assert some more invariants.
        (gsi_insert_before_without_update, gsi_insert_after_without_update):
        Tidy.
        (gsi_for_stmt): Don't search for stmt.
        (gsi_insert_on_edge_immediate): Tidy.

        * gimple.c (gimple_alloc_k): Remove "sequences".
        (gimple_seq_cache): Remove.
        (gimple_alloc_stat): Make stmt a singleton sequence.
        (gimple_seq_alloc, gimple_seq_free): Remove.
        (gimple_assign_set_rhs_with_ops_1): Ensure new stmt is a singleton.
        (gimple_copy): Ditto.
        * gimplify.c (gimplify_cleanup_point_expr): Use gsi_set_stmt,
        create iterator from correct sequence.
        * tree-phinodes.c (make_phi_node): Make stmt a singleton.

2012-05-02  Michael Matz  <matz@suse.de>

        * gimple.h (gimple_stmt_iterator <seq>): Make it be pointer to
        gimple_seq.
        (gimple_seq_set_last, gimple_seq_set_first): Take pointer to
        sequence, lazily allocate it.
        (bb_seq_addr): New function.
        (gsi_start_1): Rename from gsi_start, but take pointer to sequence.
        (gsi_start): Macro to wrap gsi_start_1 taking pointer of argument.
        (gsi_none): New function.
        (gsi_start_bb): Adjust.
        (gsi_last_1): Rename from gsi_last, but take pointer to sequence.
        (gsi_last): Macro to wrap gsi_last_1 taking pointer of argument.
        (gsi_last_bb): Adjust.
        (gsi_seq): Adjust.
        * tree-flow-inline.h (phi_nodes_ptr): New function.

        * gimple-iterator.c (gsi_insert_seq_nodes_before): Adjust to
        datastructure and interface change.
        (gsi_insert_seq_before_without_update): Ditto.
        (gsi_insert_seq_nodes_after): Ditto.
        (gsi_insert_seq_after_without_update): Ditto.
        (gsi_split_seq_after): Ditto, don't use gimple_seq_alloc.
        (gsi_split_seq_before): Ditto.
        (gsi_start_phis): Adjust.
        * tree-vect-loop.c (vect_determine_vectorization_factor): Use gsi_none.
        (vect_transform_loop): Ditto.
        * gimple.c (gimple_seq_add_stmt, gimple_seq_add_seq,
        gimple_seq_copy): Don't use gimple_seq_alloc.
        * gimplify.c (gimple_seq_add_stmt_without_update): Ditto.
        (gimplify_seq_add_seq): Ditto.
        * lto-streamer-in.c (make_new_block): Ditto.
        * tree-cfg.c (create_bb): Ditto.
        * tree-sra.c (initialize_parameter_reductions): Ditto.

2012-05-02  Michael Matz  <matz@suse.de>

        * gimple.h (gimple_seq_first, gimple_seq_first_stmt, gimple_seq_last,
        gimple_seq_last_stmt, gimple_seq_set_last, gimple_seq_set_first,
        gimple_seq_empty_p, gimple_seq_alloc_with_stmt, bb_seq,
        set_bb_seq): Move down to after gimple_statement_d definition.

2012-05-02  Michael Matz  <matz@suse.de>

        * gimple-fold.c (gimplify_and_update_call_from_tree): Use
        gsi_replace_with_seq, instead of inserting itself.
        * gimple-iterator.c (gsi_replace_with_seq): New function.
        * tree-ssa-forwprop.c (forward_propagate_comparison): Take
        iterator instead of statement, advance it.
        (ssa_forward_propagate_and_combine): Adjust call to above.

2012-05-02  Michael Matz  <matz@suse.de>

        * tree-phinodes.c (add_phi_node_to_bb): Tidy, don't use
        gimple_seq_alloc.
        * omp-low.c (finalize_task_copyfn): Don't use gimple_seq_alloc.
        * tree-nested.c (walk_gimple_omp_for): Ditto.
        * trans-mem.c (lower_transaction): Ditto.
        * tree-eh.c (do_return_redirection): Ditto.
        (do_goto_redirection): Ditto.
        (lower_try_finally_switch): Ditto.
        * gimplify.c (gimplify_stmt): Ditto.
        (gimplify_scan_omp_clauses): Ditto.
        (gimplify_omp_for): Ditto.
        (gimplify_function_tree): Ditto.
        * gimple-fold.c (gimplify_and_update_call_from_tree): Ditto.
        * tree-mudflap.c (mf_decl_cache_locals): Ditto.
        (mf_build_check_statement_for): Ditto.
        (mx_register_decls): Ditto.
        * graphite-sese-to-poly.c (remove_invariant_phi): Ditto,
        and don't use itertors to append.
        (insert_stmts): Ditto.
        (insert_out_of_ssa_copy): Ditto.
        (insert_out_of_ssa_copy_on_edge): Ditto.

2012-05-02  Michael Matz  <matz@suse.de>

        * gimple.h (gimple_bind_body_ptr): New function.
        (gimple_bind_body): Use it.
        (gimple_catch_handler): Use gimple_catch_handler_ptr.
        (gimple_eh_filter_failure_ptr): New function.
        (gimple_eh_filter_failure): Use it.
        (gimple_eh_else_n_body_ptr): New function.
        (gimple_eh_else_n_body): Use it.
        (gimple_eh_else_e_body_ptr): New function.
        (gimple_eh_else_e_body): Use it.
        (gimple_try_eval_ptr): New function.
        (gimple_try_eval): Use it.
        (gimple_try_cleanup_ptr): New function.
        (gimple_try_cleanup): Use it.
        (gimple_wce_cleanup_ptr): New function.
        (gimple_wce_cleanup): Use it.
        (gimple_omp_body_ptr): New function.
        (gimple_omp_body): Use it.
        (gimple_omp_for_pre_body_ptr): New function.
        (gimple_omp_for_pre_body): Use it.
        (gimple_transaction_body_ptr): New function.
        (gimple_transaction_body): Use it.
        (gsi_split_seq_before): Adjust to return nothing and take pointer
        to sequence.
        (gsi_set_stmt): Declare.
        (gsi_replace_with_seq): Declare.
        (walk_gimple_seq_mod): Declare.
        * function.h (struct function <gimple_body>): Use typedef gimple_seq.

        * gimple-iterator.c (gsi_set_stmt): New function.
        (gsi_split_seq_before): Return new sequence via pointer argument.
        (gsi_replace): Use gsi_set_stmt.

        * tree-ssa-loop-im.c (move_computations_stmt): First remove
        then insert stmt.
        * tree-complex.c (update_complex_components_on_edge): Don't copy gsi.
        * tree-phinodes.c (resize_phi_node): Don't resize stmt in-place,
        return new stmt.
        (reserve_phi_args_for_new_edge): Change call to above,
        use gsi_set_stmt.

        * omp-low.c (lower_omp): Change prototype to take pointer to sequence.
        (lower_rec_input_clauses): Use gimple_seq_add_seq instead of
        iterators.  Adjust call to lower_omp.
        (lower_lastprivate_clauses): Adjust call to lower_omp.
        (lower_reduction_clauses): Ditto.
        (expand_omp_taskreg): Nullify non-cfg body of child_fn.
        (lower_omp_sections): Don't explicitely count sequence length,
        nullify lowered bodies earlier, ensure stmts are part of only
        one sequence, adjust call to lower_omp.
        (lower_omp_single): Ensure stmts are part of only one sequence,
        adjust call to lower_omp.
        (lower_omp_master): Ditto.
        (lower_omp_ordered): Ditto.
        (lower_omp_critical): Ditto.
        (lower_omp_for): Ditto.
        (lower_omp_taskreg): Ditto, tidy.
        (lower_omp_1): Adjust calls to lower_omp.
        (execute_lower_omp): Ditto.
        (lower_omp): Adjust to take pointer to sequence.
        (diagnose_sb_2): Use walk_gimple_seq_mod.
        (diagnose_omp_structured_block_errors): Ditto and set possibly
        changed function body.
        * gimple-low.c (lower_function_body): Set function body after
        it stabilizes.
        (lower_sequence): Adjust to take pointer to sequence.
        (lower_omp_directive): Ensure stmt isn't put twice into the
        sequence, adjust call to lower_sequence.
        (lower_stmt): Adjust calls to lower_sequence.
        (lower_gimple_bind): Ditto.
        (gimple_try_catch_may_fallthru): Call gsi_start with lvalue.
        * tree-nested.c (walk_body): Take pointer to sequence, use
        walk_gimple_seq_mod.
        (walk_function): Adjust call to walk_body, set possibly changed body.
        (walk_gimple_omp_for): Adjust calls to walk_body.
        (convert_nonlocal_omp_clauses): Ditto.
        (convert_nonlocal_reference_stmt): Ditto.
        (convert_local_omp_clauses): Ditto.
        (convert_local_reference_stmt): Ditto.
        (convert_tramp_reference_stmt): Ditto.
        (convert_gimple_call): Ditto.
        (convert_nl_goto_reference): Use local iterator copy.
        * gimple.c (walk_gimple_seq_mod): Renamed from walk_gimple_seq,
        but taking pointer to sequence, ensure gsi_start is called with
        callers lvalue.
        (walk_gimple_seq): New wrapper around walk_gimple_seq_mod,
        asserting that the sequence head didn't change.
        (walk_gimple_stmt): Replace all calls to walk_gimple_seq with
        walk_gimple_seq_mod.
        * trans-mem.c (lower_transaction): Use walk_gimple_seq_mod.
        (execute_lower_tm): Ditto, and set possibly changed body.
        * tree-eh.c (lower_eh_constructs_1): Take pointer to sequence,
        call gsi_start with that lvalue.
        (replace_goto_queue_stmt_list): Ditto.
        (replace_goto_queue_1): Adjust calls to replace_goto_queue_stmt_list.
        (replace_goto_queue): Ditto.
        (lower_try_finally_nofallthru): Adjust calls to lower_eh_constructs_1.
        (lower_try_finally_onedest): Ditto.
        (lower_try_finally_copy): Ditto.
        (lower_try_finally_switch): Ditto.
        (lower_try_finally): Ditto.
        (lower_eh_filter): Ditto.
        (lower_eh_must_not_throw): Ditto.
        (lower_cleanup): Ditto.
        (lower_eh_constructs_2): Ditto.
        (lower_catch): Ditto, and ensure gsi_start is called with lvalue.
        (lower_eh_constructs): Adjust calls to lower_eh_constructs_1, and
        set possibly changed body.
        (optimize_double_finally): Call gsi_start with lvalue.

        * tree-cfg.c (make_blocks): Adjust call to gsi_split_seq_before.
        (gimple_split_block): Ditto.
        (gimple_merge_blocks): Use gsi_start_phis.
        (move_stmt_r): Use walk_gimple_seq_mod.
        * tree-ssa-dse.c (dse_enter_block): Use gsi_last_bb.
        * cgraphbuild.c (build_cgraph_edges): Use gsi_start_phis.
        (rebuild_cgraph_edges): Ditto.
        (cgraph_rebuild_references): Ditto.
        * ipa-prop.c (ipa_analyze_params_uses): Ditto.
        * tree-inline.c (copy_phis_for_bb): Ditto.
        * tree-ssa-dce.c: Ditto.

        * cgraphunit.c (cgraph_analyze_function): Use gimple_has_body_p.

2012-05-02  Kirill Yukhin  <kirill.yukhin@intel.com>
            Andi Kleen  <ak@linux.intel.com>

        * coretypes.h (MEMMODEL_MASK): New.
        * builtins.c (get_memmodel): Add val. Call target.memmodel_check
        and return new variable.
        (expand_builtin_atomic_exchange):  Mask memmodel values.
        (expand_builtin_atomic_compare_exchange): Ditto.
        (expand_builtin_atomic_load): Ditto.
        (expand_builtin_atomic_store): Ditto.
        (expand_builtin_atomic_clear): Ditto.
        * doc/extend.texi: Mention port-dependent memory model flags.
        * config/i386/cpuid.h (bit_HLE): New.
        * config/i386/driver-i386.c (host_detect_local_cpu): Detect
        HLE support.
        * config/i386/i386-protos.h (ix86_generate_hle_prefix): New.
        * config/i386/i386-c.c (ix86_target_macros_internal): Set HLE defines.
        (ix86_target_string)<-mhle>: New.
        (ix86_valid_target_attribute_inner_p) <OPT_mhle>: Ditto.
        * config/i386/i386.c (ix86_target_string) <OPTION_MASK_ISA_HLE>: New.
        (ix86_valid_target_attribute_inner_p) <OPT_mhle>: Ditto.
        (ix86_option_override_internal) <PTA_HLE>: New switch, set it
        enabled for generic, generic64 and core-avx2.
        (ix86_print_operand): Generate HLE lock prefixes.
        (ix86_memmodel_check): New.
        (TARGET_MEMMODEL_CHECK): Ditto.
        * config/i386/i386.h (OPTION_ISA_HLE): Ditto.
        (IX86_HLE_ACQUIRE): Ditto.
        (IX86_HLE_RELEASE): Ditto.
        * config/i386/i386.h (ix86_generate_hle_prefix): Ditto.
        * config/i386/i386.opt (mhle): Ditto.
        * config/i386/sync.md(atomic_compare_and_swap<mode>): Pass
        success model to instruction emitter.
        (atomic_fetch_add<mode>): Ditto.
        (atomic_exchange<mode>): Ditto.
        (atomic_add<mode>): Ditto.
        (atomic_sub<mode>): Ditto.
        (atomic_<code><mode>): Ditto.
        (*atomic_compare_and_swap_doubledi_pic): Ditto.
        (atomic_compare_and_swap_single<mode>): Define and use argument
        for success model.
        (atomic_compare_and_swap_double<mode>): Ditto.
        * configure.ac: Check if assembler support HLE prefixes.
        * configure: Regenerate.
        * config.in: Ditto.

2012-05-02  Steven Bosscher  <steven@gcc.gnu.org>

        PR middle-end/53153
        * gimplify.c (preprocess_case_label_vec_for_gimple): New function,
        split out from ...
        (gimplify_switch_expr): ... here.
        * gimple.h (preprocess_case_label_vec_for_gimple): Add prototype.
        * tree-ssa-forwprop.c (simplify_gimple_switch_label_vec): New function
        to clean up case labels with values outside the index type range.
        (simplify_gimple_switch): Call it if something changed.
        Remove strange and unnecessary assert.

2012-05-02  Richard Guenther  <rguenther@suse.de>

        * fold-const.c (div_if_zero_remainder): sizetypes no longer
        sign-extend.
        (int_const_binop_1): New worker for int_const_binop with
        overflowable parameter.  Pass it through to force_fit_type_double.
        (int_const_binop): Wrap around int_const_binop_1 with overflowable
        equal to one.
        (size_binop_loc): Call int_const_binop_1 with overflowable equal
        to minus one, forcing overflow detection for even unsigned types.
        (extract_muldiv_1): Remove bogus TYPE_IS_SIZETYPE special-casing.
        (fold_binary_loc): Call try_move_mult_to_index with signed offset.
        * stor-layout.c (initialize_sizetypes): sizetypes no longer
        sign-extend.
        (layout_type): For zero-sized arrays ignore overflow on the
        size calculations.
        * tree-ssa-ccp.c (bit_value_unop_1): Likewise.
        (bit_value_binop_1): Likewise.
        * tree.c (double_int_to_tree): Likewise.
        (double_int_fits_to_tree_p): Likewise.
        (force_fit_type_double): Likewise.
        (host_integerp): Likewise.
        (int_fits_type_p): Likewise.
        * varasm.c (output_constructor_regular_field): Sign-extend the
        field-offset to cater for negative offsets produced by the Ada
        frontend.
        * omp-low.c (extract_omp_for_data): Convert the loop step to
        signed for pointer adjustments.

2012-05-02  Richard Guenther  <rguenther@suse.de>

        * tree.c (valid_constant_size_p): New function.
        * tree.h (valid_constant_size_p): Declare.
        * cfgexpand.c (expand_one_var): Adjust check for too large
        variables by using valid_constant_size_p.
        * varasm.c (assemble_variable): Likewise.

        * c-decl.c (grokdeclarator): Properly check for sizes that
        cover more than half of the address-space.

2012-05-02  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/53163
        * tree-ssa-phiopt.c (cond_if_else_store_replacement): Don't ignore
        return value from compute_all_dependences.

        PR rtl-optimization/53160
        * ree.c (combine_reaching_defs): Handle the case where cand->insn
        has been modified by ree pass already.

2012-05-01  Ian Lance Taylor  <iant@google.com>

        PR c/37303
        * c-decl.c (build_compound_literal): Make the decl readonly if it
        an array of a readonly type.
        * gimplify.c (gimplify_compound_literal_expr): Add fallback
        parameter.  Change all callers.  If the decl is not addressable
        and is not an l-value, make it readonly.

2012-05-01  Bernd Schmidt  <bernds@codesourcery.com>

        * ira.c (allocated_reg_info_size): New static variable.
        (expand_reg_info): Manage it. Call
        setup_preferred_alternate_classes_for_new_pseudos.
        (ira): Don't do it here.  Remove local allocated_reg_info_size,
        set the global before calling find_moveable_pseudos.
        (find_moveable_pseudos): Call expand_reg_info rather than
        resize_reg_info.

2012-05-01  Richard Henderson  <rth@redhat.com>

        * common.opt (fsync-libcalls): New.
        * doc/invoke.texi: Document it.
        * optabs.c (init_sync_libfuncs): Honor it.

2012-05-01  Kenneth Zadeck  <zadeck@naturalbridge.com>
            Richard Sandiford  <r.sandiford@uk.ibm.com>

        PR rtl-optimization/52543
        * Makefile.in (lower-subreg.o, target-globals.o): Depend on
        lower-subreg.h.
        * lower-subreg.h: New file.
        * target-globals.h (this_target_lower_subreg): Declare.
        (target_globals): Add lower_subreg;
        (restore_target_globals): Restore this_target_lower_subreg.
        * target-globals.c: Include it.
        (default_target_globals): Add default_target_lower_subreg.
        (save_target_globals): Initialize target_lower_subreg.
        * rtl.h (init_lower_subreg): Added declaration.
        * toplev.c (backend_init_target): Call initializer for lower-subreg
        pass.
        * lower-subreg.c (LOG_COSTS, FORCE_LOWERING): New macros.
        (default_target_lower_subreg): New variable.
        (this_target_lower_subreg): Likewise.
        (twice_word_mode, choices): New macros.
        (shift_cost, compute_splitting_shift, compute_costs)
        (init_lower_subreg): New functions.
        (resolve_simple_move): Add speed_p argument.  Check choices.
        (find_pseudo_copy): Don't check the mode size here.
        (resolve_simple_move): Assert the mode size.
        (find_decomposable_shift_zext): Add speed_p argument and return
        a bool.  Check choices.
        (resolve_shift_zext): Add comment.
        (dump_shift_choices, dump_choices): New functions.
        (decompose_multiword_subregs): Dump list of profitable
        transformations.  Add code to skip non profitable transformations.
        Update calls to simple_move and find_decomposable_shift_zext.

2012-05-01  Ian Bolton  <ian.bolton@arm.com>
            Sameera Deshpande  <sameera.deshpande@arm.com>
            Greta Yorsh  <greta.yorsh@arm.com>

        * config/arm/arm-protos.h (thumb_unexpanded_epilogue): Rename to...
        (thumb1_unexpanded_epilogue): ...this.
        * config/arm/arm.c (thumb_unexpanded_epilogue): Rename to...
        (thumb1_unexpanded_epilogue): ...this.
        * config/arm/arm.md (thumb_unexpanded_epilogue): Rename to...
        (thumb1_unexpanded_epilogue): ...this.

2012-05-01  Richard Earnshaw  <rearnsha@arm.com>

        * arm/linux-eabi.h (GLIBC_DYNAMIC_LINKER_DEFAULT): Avoid ifdef
        comparing enumeration values.  Update comments.

2012-05-01  Alan Modra  <amodra@gmail.com>

        PR target/53038
        * config/rs6000/rs6000.c (load_lr_save, restore_saved_lr,
        load_cr_save, add_crlr_cfa_restore): New functions.
        (rs6000_restore_saved_cr): Rename to..
        (restore_saved_cr): ..this.  Add cfa_restore notes for cr.
        (rs6000_emit_epilogue): Use new functions.  Adjust condition
        for emitting lr and cr cfa_restore.  Emit cfa_restores for fp
        regs when using out-of-line restore only when shrink wrapping.

2012-04-30  Uros Bizjak  <ubizjak@gmail.com>

        PR middle-end/53136
        * ipa-prop.c (ipa_print_node_jump_functions): Wrap multiple
        calls to cgraph_node_name in xstrdup.
        (ipa_make_edge_direct_to_target): Ditto.
        * cgraph.c (dump_cgraph_node): Ditto.
        * tree-sra.c (convert_callers_for_node): Ditto.
        * lto-symtab.c (lto_cgraph_replace_node): Ditto.
        * ipa-cp.c (perhaps_add_new_callers): Ditto.
        * cgraphunit.c (cgraph_redirect_edge_call_stmt_to_callee): Ditto.
        (cgraph_materialize_all_clones): Ditto.
        * ipa-inline.c (report_inline_failed_reason): Ditto.
        (want_early_inline_function_p): Ditto.
        (edge_badness): Ditto.
        (update_edge_key): Ditto.
        (flatten_function): Ditto.
        (ipa_inline): Ditto.
        (inline_always_inline_functions): Ditto.
        (early_inline_small_functions): Ditto.

2012-04-30  Uros Bizjak  <ubizjak@gmail.com>

        PR target/53141
        * config/i386/i386.md (*umul<mode><dwi>3_1): Switch places of
        constraints 0 and 1.

012-04-30  Jan Hubicka  <jh@suse.cz>

        * cgraph.c (ld_plugin_symbol_resolution_names): Move to symtab.c
        (cgraph_asm_nodes, cgraph_asm_last_node): Move to cgraphunit.c
        (cgraph_add_to_same_comdat_group): Remove.
        (cgraph_add_asm_node): Move to cgraphunit.c.
        (cgraph_make_decl_local): Move to symtab.c
        (cgraph_make_node_local_1): Update.
        (cgraph_can_remove_if_no_direct_calls_and): Update.
        (used_from_object_file_p): Update.
        (resolution_used_from_other_file_p): Move to symtab.c
        (cgraph_used_from_object_file_p): move to symtab.c
        (verify_cgraph_node): Verify same comdat groups.
        * cgraph.h (cgraph_asm_node): Rename to ...
        (asm_node): ... this one.
        (cgraph_asm_nodes): Rename to ...
        (asm_nodes): ... this one.
        (symtab_add_to_same_comdat_group): New function.
        (symtab_dissolve_same_comdat_group_list): New function.
        (symtab_used_from_object_file_p): Declare.
        (symtab_make_decl_local): Declare.
        (cgraph_add_to_same_comdat_group): Remove.
        (cgraph_add_asm_node): Remove.
        (cgraph_used_from_object_file_p, varpool_used_from_object_file_p):
        Remove.
        (cgraph_finalize_compilation_unit): Rename to ...
        (finalize_compilation_unit): ... this one.
        (cgraph_optimize): Rename to ....
        (compile): ... this one.
        (add_asm_node): Declare.
        (fixup_same_cpp_alias_visibility): Declare.
        (cgraph_make_decl_local): Remove.
        (varpool_assemble_pending_decls): Rename to ...
        (varpool_output_variables): ... this one.
        (varpool_remove_unreferenced_decls): Remove.
        * ipa-inline-transform.c (clone_inlined_nodes): Dissolve comdat groups.
        (preserve_function_body_p): Make static.
        * toplev.c (compile_file): Update comments; update.
        * cgraphunit.c: Update comments.
        (cgraph_expand_all_functions): Rename to ...
        (expand_all_functions): ... this one; update.
        (cgraph_mark_functions_to_output): Rename to ...
        (mark_functions_to_output): ... this one; cleanup.
        (cgraph_output_pending_asms): Remove prototype.
        (asm_nodes, asm_last_node): New static vars.
        (cgraph_process_new_functions): Update.
        (cgraph_reset_node): Cleanup; add comment.
        (cgraph_add_new_function): Update.
        (cgraph_output_pending_asms): Rename to ...
        (output_asm_statements): ... this one.
        (add_asm_node): New function.
        (fixup_same_cpp_alias_visibility): New function based on code
        in cgraph_analyze_function.
        (cgraph_analyze_function): Use it.
        (cgraph_order_sort): Update.
        (cgraph_output_in_order): Update.
        (cgraph_function_versioning): Update.
        (cgraph_optimize): Rename to ...
        (compile): ... this one; initialize streamer hooks here.
        (cgraph_finalize_compilation_unit): Rename to ...
        (finalize_compilation_unit): ... this one; do not initialize streamer
        hook here.
        * lto-streamer-out.c (lto_output_toplevel_asms): Update.
        * dwarf2out.c: Update ocmment.
        * optimize.c (maybe_clone_body): Use symtab_add_to_same_comdat_group.
        * method.c (use_thunk): Likewise.
        * semantics.c (maybe_add_lambda_conv_op): Likewise.
        * decl2.c (maybe_emit_vtables): Likewise.
        (cp_write_global_declarations): Use finalize_compilation_unit.
        * parser.c (cp_parser_asm_definition): Use add_asm_node.
        * lto-streamer-in.c (lto_input_toplevel_asms): Use add_asm_node
        * c-decl.c (c_write_global_declarations): Use
        finalize_compilation_unit.
        * langhooks.c (write_global_declarations): Update.
        * ipa.c (cgraph_externally_visible_p): Update.
        (dissolve_same_comdat_group_list): Remove.
        (function_and_variable_visibility): Update.
        * symtab.c: Inlcude lto-streamer.h and rtl.h
        (ld_plugin_symbol_resolution_names): New.
        (symtab_add_to_same_comdat_group): New.
        (symtab_dissolve_same_comdat_group_list): New.
        (resolution_used_from_other_file_p): Move here from cgraph.c
        (symtab_used_from_object_file_p): New.
        (symtab_make_decl_local): New.
        * passes.c (register_pass): Update comments.
        * c-parser.c (c_parser_asm_definition): Update.
        * varpool.c (varpool_analyze_node): Use
        fixup_same_cpp_alias_visibility.
        (varpool_remove_unreferenced_decls): Make static.
        (varpool_assemble_pending_decls): Rename to ...
        (varpool_output_variables): ... this one; call
        varpool_remove_unreferenced_decls.
        (varpool_used_from_object_file_p): Remove.

2012-04-30  Marc Glisse  <marc.glisse@inria.fr>

        PR c++/51033
        * c-typeck.c (build_array_ref): Call
        convert_vector_to_pointer_for_subscript.
        * doc/extend.texi (Vector Extensions): Subscripting not just for C.

2012-04-30  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (and<mode>3): Change runtime operand mode checks
        to compile-time "mode == <MODE>mode" checks.
        (and splitter): Ditto.

2012-04-30  Richard Henderson  <rth@redhat.com>

        * config/arm/arm.md (UNSPEC_LL): New.
        * config/arm/sync.md (atomic_loaddi, atomic_loaddi_1): New.
        (arm_load_exclusivedi): Use %H0.

2012-04-30  Jason Merrill  <jason@redhat.com>

        * dwarf2out.c (comdat_symbol_id): Add const.
        (union die_symbol_or_type_node): Add const to die_symbol.
        (output_die_symbol, output_die, output_comp_unit): Adjust.

2012-04-30  Andrew Stubbs  <ams@codesourcery.com>

        * config/arm/arm.md (negdi2): Use gen_negdi2_neon.
        * config/arm/neon.md (negdi2_neon): New insn.
        Also add splitters for core and NEON registers.

2012-04-30  Andrew Stubbs  <ams@codesourcery.com>

        * config/arm/arm.c (neon_valid_immediate): Allow const_int.
        (arm_print_operand): Add 'x' format.
        * config/arm/constraints.md (Dn): Allow const_int.
        * config/arm/neon.md (neon_mov<mode>): Use VDX to allow DImode.
        Use 'x' format to print constants.
        * config/arm/predicates.md (imm_for_neon_mov_operand): Allow const_int.
        * config/arm/vfp.md (movdi_vfp): Disable for const_int when neon
        is enabled.
        (movdi_vfp_cortexa8): Likewise.

2012-04-30  Ian Bolton  <ian.bolton@arm.com>
            Sameera Deshpande  <sameera.deshpande@arm.com>
            Greta Yorsh  <greta.yorsh@arm.com>

        * config/arm/arm-protos.h (ldm_stm_operation_p): New declaration.
        * config/arm/arm.c (ldm_stm_operation_p): New function.
        * config/arm/predicates.md (load_multiple_operation): Update predicate.
        (store_multiple_operation): Likewise.

        * config/arm/arm-protos.h (ldm_stm_operation_p): New parameters.
        * config/arm/arm.c (ldm_stm_operation_p): New parameters.
        * config/arm/predicates.md (load_multiple_operation): Add arguments.
        (store_multiple_operation): Likewise.

2012-04-30  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (and<mode>3): Expand masking operations with
        0xff, 0xffff or 0xffffffff immediates to corresponding zero_extend RTX.
        (and splitter): Split to DImode zero_extend RTX for DImode operand[0].

2012-04-30  Dodji Seketeli  <dodji@redhat.com>

        Add -Wvarargs option
        * builtins.c (fold_builtin_next_arg):  Use OPT_Wvarargs as an
        argument for the various warning_at calls.
        * docs/invoke.texi: Update the documentation.

2012-04-30  Dodji Seketeli  <dodji@redhat.com>

        Switch -ftrack-macro-expansion=2 on by default.
        * docs/cppopts.texi: Adjust for enabling -ftrack-macro-expansion=2
        by default.

        Fix va_start related location
        * builtins.c (fold_builtin_next_arg): Unwinds to the first
        location in real source code.

        Make conversion warnings work on NULL with -ftrack-macro-expansion
        * input.h (expansion_point_location_if_in_system_header): Declare
        new function.
        * input.c (expansion_point_location_if_in_system_header): Define it.

        Fix -Wuninitialized for -ftrack-macro-expansion
        * tree-ssa.c (warn_uninit): Use the spelling location of the variable
        declaration.  Use linemap_location_before_p for source locations.

        Strip "<built-in>" loc from displayed expansion context
        * input.c (expand_location_1): When expanding to spelling location
        in a context of a macro expansion, skip reserved system header
        locations.  Update comments.  * tree-diagnostic.c
        (maybe_unwind_expanded_macro_loc): Likewise.

        Make expand_location resolve to locus in main source file
        * input.c (expand_location_1): New.  Takes a parameter to choose
        whether to resolve the location to spelling or expansion point.
        Was factorized from ...
        (expand_location): ... here.
        (expand_location_to_spelling_point): New.  Implemented in terms of
        expand_location_1.
        * diagnostic.c (diagnostic_build_prefix): Use the new
        expand_location_to_spelling_point instead of expand_location.

        Fix PCH crash on GTYed pointer-to-scalar field of a struct
        * gengtype.c (write_types_process_field): Force second argument of
        the call to the PCH object hierarchy walker to be 'x'.

2012-04-30  Eric Botcazou  <ebotcazou@adacore.com>

        * config/i386/i386.c (ix86_handle_struct_attribute): Use the proper
        predicate to discriminate types.

2012-04-30  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        * doc/invoke.texi (Wmissing-format-attribute): Document as an
        alias of Wsuggest-attribute=format.
        * c-typeck.c (convert_for_assignment): Replace
        Wmissing-format-attribute with Wsuggest-attribute=format.
        (digest_init): Likewise.

2012-04-29  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        * opts.c (finish_options): Do not handle -Wmissing-noreturn here.
        * common.opt (Wmissing-noreturn): Alias of
        -Wsuggest-attribute=noreturn.

2012-04-29  Hans-Peter Nilsson  <hp@axis.com>

        PR target/53156
        * config/cris/cris.md (andqu): New peephole2.
        (andu): Tweak head comment.

2012-04-28  Joern Rennecke  <joern.rennecke@embecosm.com>
            Steven Bosscher  <steven@gcc.gnu.org>
            Maxim Kuvyrkov  <maxim@codesourcery.com>

        PR tree-optimization/38785
        * common.opt (ftree-partial-pre): New option.
        * doc/invoke.texi: Document it.
        * opts.c (default_options_table): Initialize flag_tree_partial_pre.
        * tree-ssa-pre.c (do_partial_partial_insertion): Insert only if it will
        benefit speed path.
        (execute_pre): Use flag_tree_partial_pre.

2012-04-27  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        PR target/52999
        * config/pa/pa.c (pa_legitimate_constant_p): Don't put function labels
        in constant pool.

2012-04-27  Ollie Wild  <aaw@google.com>

        * doc/invoke.texi (Wliteral-suffix): Document new option.

2012-04-27  Tom Tromey  <tromey@redhat.com>

        * dwarf2out.c (dwarf_stack_op_name): Use get_DW_OP_name.
        (dwarf_tag_name): Use get_DW_TAG_name.
        (dwarf_attr_name): Use get_DW_AT_name.
        (dwarf_form_name): Use get_DW_FORM_name.
        * dwarf2cfi.c (dwarf_cfi_name): Use get_DW_CFA_name.

2012-04-27  Paolo Bonzini  <bonzini@gnu.org>

        * tree-ssa-phiopt.c (conditional_replacement): Replace PHIs whose
        arguments are -1 and 0, by negating the result of the conditional.

2012-04-27  Paolo Bonzini  <bonzini@gnu.org>

        PR target/53138
        * config/i386/i386.md (x86_mov<mode>cc_0_m1_neg): Add clobber.

2012-04-27  Richard Guenther  <rguenther@suse.de>

        * tree-flow.h (is_hidden_global_store): Remove.
        * tree-ssa-sink.c (is_hidden_global_store): Likewise.
        * tree-ssa-alias.h (ref_may_alias_global_p): Declare.
        (stmt_may_clobber_global_p): Likewise.
        * tree-ssa-alias.c (ref_may_alias_global_p): New function.
        (stmt_may_clobber_global_p): Likewise.
        * tree-ssa-dce.c (mark_stmt_if_obviously_necessary): Call
        stmt_may_clobber_global_p.
        * tree-ssa-dse.c (dse_possible_dead_store_p): Likewise.

2012-04-27  Steven Bosscher  <steven@gcc.gnu.org>

        * cfg.c (disconnect_src): Do df_mark_solutions_dirty in the right
        place.

        * tree-switch-conversion.c (struct switch_conv_info): Add range_max,
        reorganize some fields and update comments.  Rename bit_test_uniq
        and bit_test_count to uniq resp. count.  Remove bit_test_bb.
        (collect_switch_conv_info): New function, collects info about a
        GIMPLE_SWITCH into a struct switch_conv_info.
        (check_range): Simplify to use pre-recorded info.  Fix think-o in
        range-branch ratio check.
        (check_process_case): Remove function.
        (check_all_empty_except_final): New function, verifies that all
        non-final basic blocks are empty.
        (process_switch): Simplify to use pre-recorded info.  Call
        collect_switch_conv_info to do that.  Assert that degenerate switch
        statements have been cleaned up.

2012-04-27  Marc Glisse  <marc.glisse@inria.fr>

        PR middle-end/27139
        * tree-ssa-forwprop.c (combine_conversions): Handle INT->FP->INT.

2012-04-25  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR c/53130
        * c-typeck.c (pop_init_level): Use %qD instead of %qT.

2012-04-27  Tom de Vries  <tom@codesourcery.com>

        PR tree-optimization/51879
        * tree-ssa-sccvn.h (struct vn_reference_s): Add result_vdef field.
        * tree-ssa-sccvn.c (mark_use_processed): New function, factored out
        of ...
        (defs_to_varying): ... here.  Don't set use_processed.
        (visit_reference_op_call): Handle gimple_vdef.
        Handle case that lhs is NULL_TREE.
        (visit_use): Use mark_use_processed.  Handle calls with side-effect
        using visit_reference_op_call.

2012-04-26  Richard Sandiford  <richard.sandiford@linaro.org>

        * sched-deps.c (fixup_sched_groups): Rename to...
        (chain_to_prev_insn): ...this.
        (chain_to_prev_insn_p): New function.
        (deps_analyze_insn): Use it instead of SCHED_GROUP_P.

2012-04-26  Richard Sandiford  <richard.sandiford@linaro.org>

        * sched-int.h (_haifa_insn_data): Move priority_status.
        Add model_index.
        (INSN_MODEL_INDEX): New macro.
        * haifa-sched.c (insn_delay): New function.
        (sched_regno_pressure_class): Update commentary.
        (mark_regno_birth_or_death): Pass the liveness bitmap and
        pressure array as arguments, instead of using curr_reg_live and
        curr_reg_pressure.  Only update the pressure if the bit in the
        liveness set has changed.
        (initiate_reg_pressure_info): Always trust the live-in set for
        SCHED_PRESSURE_MODEL.
        (initiate_bb_reg_pressure_info): Update call to
        mark_regno_birth_or_death.
        (dep_list_size): Take the list as argument.
        (calculate_reg_deaths): New function, extracted from...
        (setup_insn_reg_pressure_info): ...here.
        (MODEL_BAR): New macro.
        (model_pressure_data, model_insn_info, model_pressure_limit)
        (model_pressure_group): New structures.
        (model_schedule, model_worklist, model_insns, model_num_insns)
        (model_curr_point, model_before_pressure, model_next_priority):
        New variables.
        (MODEL_PRESSURE_DATA, MODEL_MAX_PRESSURE, MODEL_REF_PRESSURE)
        (MODEL_INSN_INFO, MODEL_INSN): New macros.
        (model_index, model_update_limit_points_in_group): New functions.
        (model_update_limit_points, model_last_use_except): Likewise.
        (model_start_update_pressure, model_update_pressure): Likewise.
        (model_recompute, model_spill_cost, model_excess_group_cost): Likewise.
        (model_excess_cost, model_dump_pressure_points): Likewise.
        (model_set_excess_costs): Likewise.
        (rank_for_schedule): Extend SCHED_PRIORITY_WEIGHTED ordering to
        SCHED_PRIORITY_MODEL.  Use insn_delay.  Use the order in the model
        schedule as an alternative tie-breaker.  Update the call to
        dep_list_size.
        (ready_sort): Call model_set_excess_costs.
        (update_register_pressure): Update call to mark_regno_birth_or_death.
        Rely on that function to check liveness rather than doing it here.
        (model_classify_pressure, model_order_p, model_add_to_worklist_at)
        (model_remove_from_worklist, model_add_to_worklist, model_promote_insn)
        (model_add_to_schedule, model_analyze_insns, model_init_pressure_group)
        (model_record_pressure, model_record_pressures): New functions.
        (model_record_final_pressures, model_add_successors_to_worklist)
        (model_promote_predecessors, model_choose_insn): Likewise.
        (model_reset_queue_indices, model_dump_pressure_summary): Likewise.
        (model_start_schedule, model_finalize_pressure_group): Likewise.
        (model_end_schedule): Likewise.
        (schedule_insn): Say when we're scheduling the next instruction
        in the model schedule.
        (schedule_insn): Handle SCHED_PRESSURE_MODEL.
        (queue_to_ready): Do not add instructions that are
        MAX_SCHED_READY_INSNS beyond the current point of the model schedule.
        Always allow the next instruction in the model schedule to be added.
        (debug_ready_list): Print the INSN_REG_PRESSURE_EXCESS_COST_CHANGE
        and delay for SCHED_PRESSURE_MODEL too.
        (prune_ready_list): Extend SCHED_PRIORITY_WEIGHTED handling to
        SCHED_PRIORITY_MODEL, but also take the DFA into account.
        (schedule_block): Call model_start_schedule and model_end_schedule.
        Extend SCHED_PRIORITY_WEIGHTED stall handling to SCHED_PRIORITY_MODEL.
        (sched_init): Extend INSN_REG_PRESSURE_EXCESS_COST_CHANGE handling
        to SCHED_PRESSURE_MODEL, but don't allocate saved_reg_live or
        region_ref_regs.
        (sched_finish): Update accordingly.
        (fix_tick_ready): Extend INSN_REG_PRESSURE_EXCESS_COST_CHANGE handling
        to SCHED_PRESSURE_MODEL.
        (add_jump_dependencies): Update call to dep_list_size.
        (haifa_finish_h_i_d): Fix leak of max_reg_pressure.
        (haifa_init_insn): Extend INSN_REG_PRESSURE_EXCESS_COST_CHANGE handling
        to SCHED_PRESSURE_MODEL.
        * sched-deps.c (init_insn_reg_pressure_info): Likewise, but don't
        allocate INSN_MAX_REG_PRESSURE for SCHED_PRESSURE_MODEL.
        (sched_analyze_insn): Extend INSN_REG_PRESSURE_EXCESS_COST_CHANGE
        handling to SCHED_PRESSURE_MODEL.

2012-04-26  Richard Sandiford  <richard.sandiford@linaro.org>

        * common.opt (fsched-pressure-algorithm=): New option.
        * flag-types.h (sched_pressure_algorithm): New enum.
        * sched-int.h (sched_pressure_p): Replace with...
        (sched_pressure): ...this new variable.
        * haifa-sched.c (sched_pressure_p): Replace with...
        (sched_pressure): ...this new variable.
        (sched_regno_pressure_class, rank_for_schedule, ready_sort)
        (update_reg_and_insn_max_reg_pressure, schedule_insn)
        (debug_ready_list, prune_ready_list, schedule_block, sched_init)
        (sched_finish, fix_tick_ready, haifa_init_insn): Update accordingly.
        * sched-deps.c (init_insn_reg_pressure_info): Likewise.
        (sched_analyze_insn): Likewise.
        * sched-rgn.c (schedule_region): Likewise.
        * config/m68k/m68k.c (m68k_sched_variable_issue): Likewise.

2012-04-26  Bernd Schmidt  <bernds@codesourcery.com>

        PR middle-end/52997
        * ira.c (find_moveable_pseudos): Call resize_reg_info.

        PR middle-end/52940
        * machmode.h (CLASS_HAS_WIDER_MODES_P): True for MODE_PARTIAL_INT.
        * expr.c (convert_move): Honor unsignedp when extending partial int
        modes.
        * genmodes.c (complete_mode): Don't clear component field of partial
        int modes.
        (emit_mode_inner): Don't emit it however.
        (calc_wider_mode): Partial int modes widen to their component.

2012-04-26  David S. Miller  <davem@davemloft.net>

        * config/sparc/niagara4.md: New file.
        * config/sparc/sparc.md: Include it.
        * config/sparc/sparc.c (niagara4_costs): New processor costs.
        (sparc_option_override): Use it.
        (sparc_use_sched_lookahead): Return 2 for niagara4.
        (sparc_issue_rate): Likewise.

        * config/sparc/sparc.md (attr type): Delete 'fgm_cmp'.
        (fpack16_vis, fpackfix_vis, fpack32_vis): Set type to fgm_pack.
        (fmul8x16_vis, fmul8x16au_vis, fmul8x16al_vis, fmul8sux16_vis,
        fmul8ulx16_vis, fmuld8sux16_vis, fmuld8ulx16_vis): Set type to fgm_mul.
        (alignaddrsi_vis, alignaddrdi_vis, alignaddrlsi_vis,
        alignaddrldi_vis): Set type to gsr.
        (pdist_vis, pdistn<mode>_vis): Set type to fgm_pdsit.
        (fcmp<code><GCM:gcm_name><P:mode>_vis, cmask8<P:mode>_vis,
        cmask16<P:mode>_vis, cmask32<P:mode>_vis, fchksm16_vis,
        v<vis3_shift_patname><mode>3, fmean16_vis,
        fp<plusminus_insn>64_vis, <vis3_addsub_ss_patname><mode>3,
        fucmp<code>8<P:mode>_vis): Set type to fga.
        * config/sparc/ultra1_2.md: Remove refrences to fgm_cmp.
        * config/sparc/niagara.md: Likewise.
        * config/sparc/niagara2.md: Likewise.
        * config/sparc/ultra3.md: Likewise, and fix type matching for
        us3_ialuX reservation.

2012-04-26  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * reload.c (find_reloads): Change the loop nesting when trying an
        alternative with swapped operands.

2012-04-26  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        * tree-diagnostic.c (maybe_unwind_expanded_macro_loc): Fix
        comment. Delete unused parameter first_exp_point_map.
        (virt_loc_aware_diagnostic_finalizer): Update call.

2012-04-26  Michael Hope  <michael.hope@linaro.org>
            Richard Earnshaw  <rearnsha@arm.com>

        * config/arm/linux-eabi.h (GLIBC_DYNAMIC_LINKER_SOFT_FLOAT): Define.
        (GLIBC_DYNAMIC_LINKER_HARD_FLOAT): Define.
        (GLIBC_DYNAMIC_LINKER_DEFAULT): Define.
        (GLIBC_DYNAMIC_LINKER): Redefine to use the hard float path.

2012-04-25  Sriraman Tallam  <tmsriram@google.com>

        * doc/extend.texi: Document avx2 support.
        * config/i386/i386.c (fold_builtin_cpu): Add avx2.

2012-04-26  Hans-Peter Nilsson  <hp@axis.com>

        PR target/53120
        * config/cris/cris.md ("*andhi_lowpart_v32")
        ("*andqi_lowpart_v32"): Change first input-only operand from
        a (match_operand ...) to (match_dup 0).  Drop alternatives with
        const_int-matching constraints for redundancy.
        ("*andhi_lowpart_non_v32", "*andqi_lowpart_non_v32"): Ditto.  Drop
        three-operand alternative.

2012-04-25  Jakub Jelinek  <jakub@redhat.com>

        PR target/53110
        * config/i386/i386.md (and<mode>3): For andq $0xffffffff, reg
        instead expand it as zero extension.

2012-04-25  H.J. Lu  <hongjiu.lu@intel.com>

        PR debug/52857
        * dwarf2out.c (dbx_reg_number): Assert return value != INVALID_REGNUM.

2012-04-25  Jakub Jelinek  <jakub@redhat.com>

        * common.opt (flag_debug_types_section): Default to 0.
        (dwarf_version): Default to 4.
        (dwarf_record_gcc_switches): Default to 1.
        (dwarf_strict): Default to 0.
        * toplev.c (process_options): Don't handle dwarf_strict
        or dwarf_version here.
        * config/vxworks.c (vxworks_override_options): Don't
        test whether dwarf_strict or dwarf_version are negative,
        instead test !global_options_set.x_dwarf_*.
        * config/darwin.c (darwin_override_options): Default to
        dwarf_version 2.
        * doc/invoke.texi: Note that -gdwarf-4, -grecord-gcc-switches
        and -fno-debug-types-section are now the default.

2012-04-25  Jan Hubicka  <jh@suse.cz>

        * cgraphunit.c: Update toplevel comment.
        (tree_rest_of_compilation): Merge into cgraph_expand_function.
        (cgraph_analyze_function): Make static.
        (cgraph_decide_is_function_needed): Make static.
        (cgraph_add_new_function): Use expand_function instead of
        rest_of_compilation.
        (clone_of_p, verify_edge_count_and_frequency, cgraph_debug_gimple_stmt,
        verify_edge_corresponds_to_fndecl, verify_cgraph_node, verify_cgraph):
        Move to cgraph.c
        (cgraph_inline_p): Remove.
        (cgraph_preserve_function_body_p): Move to ipa-inline-transform.
        (init_cgraph): Add comment.
        * cgraphbuild.c (record_reference, mark_address, mark_load,
        mark_store): Do not call analyze_expr hook.
        * cgraph.c: Update toplevel comment.
        (clone_of_p, verify_edge_count_and_frequency, cgraph_debug_gimple_stmt,
        verify_edge_corresponds_to_fndecl, verify_cgraph_node, verify_cgraph):
        Move fere from cgraphunit.c
        (cgraph_mark_force_output_node): Move to cgraph.h
        * cgraph.h: Reorder so the comments match the function placement.
        (cgraph_analyze_function, cgraph_decide_is_function_needed): Remove.
        (cgraph_mark_force_output_node): Move here from cgraph.c
        * tree.c (free_lang_data): Do not clear analyze_expr hook.
        * ipa-inline-transform.c (preserve_function_body_p): New function.
        (inline_transform): Update.
        * langhooks.c (lhd_callgraph_analyze_expr): Remove.
        * langhooks.h (lang_hooks_for_callgraph): Remove.
        (lang_hooks): Remove callgraph.
        * tree-inline.c (expand_call_inline): Do not use cgraph_inline_p.
        * varpool.c: Remove out of date comment.
        * langhooks-def.h (lhd_callgraph_analyze_expr): Remove.
        (LANG_HOOKS_CALLGRAPH_ANALYZE_EXPR): Remove.

2012-04-25  Jan Hubicka  <jh@suse.cz>

        PR middle-end/53089
        * cgraphunit.c (referred_to_p): Move ahead in file to avoid
        forward declaration.
        (cgraph_finalize_function): Finalize them here.
        * symtab.c (dump_symtab): Dump ctors and dtors.

2012-04-25  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/52979
        * stor-layout.c (get_best_mode): Don't return mode with bitsize
        larger than maxbits.  Don't compute maxbits modulo align.
        Also check that unit bytes long store at bitpos / unit * unit
        doesn't affect bits beyond bitregion_end.
        * expmed.c (store_bit_field_1): Avoid trying insv if OP_MODE MEM
        would not fit into bitregion_start ... bitregion_end + 1 bit region.
        (store_split_bit_field): Decrease unit close to end of bitregion_end
        if access is restricted in order to avoid mutual recursion.

        PR tree-optimization/53058
        * double-int.h (double_int_max_value, double_int_min_value): New
        prototypes.
        * double-int.c (double_int_max_value, double_int_min_value): New
        functions.
        * tree-vrp.c (register_edge_assert_for_2): Compare mask for LE_EXPR
        or GT_EXPR with double_int_max_value instead of double_int_mask.

2012-04-25  Richard Guenther  <rguenther@suse.de>

        * tree-vectorizer.h (vect_loop_versioning): Adjust prototype.
        * tree-vect-loop.c (vect_transform_loop): Adjust.
        * tree-vect-loop-manip.c (vect_do_peeling_for_loop_bound): Record
        the maximum number of iterations for the epilogue loop.
        (vect_loop_versioning): Remove case re-using the peeled epilogue loop.

2012-04-25  Jakub Jelinek  <jakub@redhat.com>

        PR c/52880
        * c-typeck.c (set_nonincremental_init,
        set_nonincremental_init_from_string): Pass true instead of false
        as IMPLICIT to add_pending_init.

2012-04-25  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        * c-typeck.c (pop_init_level): Improve diagnostics.

2012-04-25  Uros Bizjak  <ubizjak@gmail.com>

        * compare-elim.c (try_eliminate_compare): Also handle operands with
        implicit extensions.

2012-04-25  Alan Modra  <amodra@gmail.com>

        * config/rs6000/rs6000 (SAVE_INLINE_VRS, REST_INLINE_VRS,
        V_SAVE_INLINE, SAVRES_LR, SAVRES_SAVE, SAVRES_REG,
        SAVRES_GPR, SAVRES_FPR, SAVRES_VR): Define.
        (no_global_regs_above): Delete.
        (no_global_regs): New function.
        (rs6000_savres_strategy): Handle vector regs.  Use proper lr_save_p
        value for load multiple test.
        (savres_routine_syms): Increase size.
        (rs6000_savres_routine_name, rs6000_savres_routine_sym,
        ptr_regno_for_savres, rs6000_emit_savres_rtx): Pass in int selector
        rather than a number of boolean flags.  Update all callers.
        (rs6000_savres_routine_name): Generate vector save/restore names.
        (rs6000_savres_routine_sym): Handle vector regs.  Delete forward decl.
        (ptr_regno_for_savres, rs6000_emit_savres_rtx): Likewise.
        (rs6000_emit_prologue): Delete saving_FPRs_inline, saving_GPRs_inline
        and using_store_multiple.  Expand uses.  Don't always use r11 as
        frame reg when needed for out-of-line saves.  Set up initial offset
        for out-of-line vector saves when buying stack frame.  Handle pointer
        reg setup for out-of-line fp save.  Emit call to out-of-line vector
        save function.  Choose r11 or r12 for vrsave reg when available for
        better scheduling.
        (rs6000_output_function_prologue): Don't emit .extern for ELF.
        (rs6000_emit_epilogue): Choose a better frame reg when restoring
        from back-chain to suit out-of-line vector restore functions.  Emit
        call to out-of-line vector restore function.  Adjust register used
        for cr restore.  Tweak pointer register setup for gpr restore.
        * config/rs6000/rs6000.h (FIRST_SAVED_GP_REGNO): Take into account
        FIXED_R13.
        * config/rs6000/sysv4.h (FP_SAVE_INLINE, GP_SAVE_INLINE): Simplify.
        (V_SAVE_INLINE): Define.
        * config/rs6000/altivec.md (save_vregs_*, restore_vregs_*): New insns.

2012-04-25  Alan Modra  <amodra@gmail.com>

        * config/rs6000/rs6000.c (rs6000_savres_strategy): Allow
        out-of-line save/restore for large frames.  Don't disable
        out-of-line saves on ABI_AIX when using static chain reg.
        (rs6000_emit_prologue): Adjust cr_save_regno on ABI_AIX to not
        clobber static chain reg, and tweak for out-of-line gpr saves
        that use r1.

2012-04-25  Alan Modra  <amodra@gmail.com>

        * config/rs6000/rs6000.c (START_USE, END_USE, NOT_INUSE): Define.
        (rs6000_emit_prologue): Use the above to catch register overlap.

2012-04-25  Alan Modra  <amodra@gmail.com>

        * config/rs6000/rs6000.c (rs6000_emit_stack_reset): Delete forward
        decl.  Move logic selecting update reg to callers.  Update all callers.
        (rs6000_emit_allocate_stack): Add copy_off param.
        (emit_frame_save): Don't handle reg+reg addressing.
        (ptr_regno_for_savres): New function, extracted from..
        (rs6000_emit_savres_rtx): ..here.  Add lr_offset param.
        (rs6000_emit_prologue): Generate frame_ptr_rtx as we need it.
        Set frame_reg_rtx to r11 whenever r11 is needed, and merge
        frame offset adjustment for out-of-line save with copy from sp.
        Simplify condition controlling whether cr is saved early or
        late.  Use ptr_regno_for_savres to verify correct reg is set
        up for out-of-line saves.  Pass the actual pointer reg used to
        rs6000_emit_savres_rtx so rtl matches insns in out-of-line
        function.  Rearrange spe vars so code is similar to that
        elsewhere in this function.  Don't update frame_off when spe
        save code will restore r11.  Use emit_frame_save for spe and
        gpr saves.  Consolidate darwin out-of-line gpr setup with that
        for other abis.  Don't assume frame_offset is zero and frame
        reg is sp when setting up altivec reg saves, and calculate
        exact offset requirement.
        (rs6000_emit_epilogue): Use HOST_WIDE_INT for frame_off.  Tidy
        spe restore code.  Consolidate darwin out-of-line gpr setup
        with that for other abis.

2012-04-25  Alan Modra  <amodra@gmail.com>

        * config/rs6000/rs6000.c (rs6000_frame_related): Don't emit a
        REG_FRAME_RELATED_EXPR note when the instruction exactly matches
        the replacement.
        (emit_frame_save): Delete frame_ptr param.  Rename total_size to
        frame_reg_to_sp.
        (rs6000_emit_prologue): Add sp_off.  Update rs6000_frame_related
        and emit_frame_save calls.  Cope with possibly missing note.

2012-04-24  Sriraman Tallam  <tmsriram@google.com>

        * config/i386/i386.c (build_processor_model_struct): New function.
        (make_var_decl): New function.
        (fold_builtin_cpu): New function.
        (ix86_fold_builtin): New function.
        (make_cpu_type_builtin): New function.
        (ix86_init_platform_type_builtins): New function.
        (ix86_expand_builtin): Expand new builtins by folding them.
        (ix86_init_builtins): Make new builtins to detect CPU type.
        (TARGET_FOLD_BUILTIN): New macro.
        (IX86_BUILTIN_CPU_INIT): New enum value.
        (IX86_BUILTIN_CPU_IS): New enum value.
        (IX86_BUILTIN_CPU_SUPPORTS): New enum value.
        * config/i386/i386-builtin-types.def: New function type.
        * doc/extend.texi: Document builtins.

2012-04-24  Olivier Hainque  <hainque@adacore.com>

        * common.opt (gdwarf-): Initialize dwarf_version to -1 instead of 2.
        * toplev.c (process_options): Default to dwarf_version 2.
        * config/vxworks.c (vxworks_override_options): Default to strict-dwarf
        and dwarf_version 2.

2012-04-24  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        * tree-pretty-print.h (default_tree_printer): Do not declare.
        * tree-diagnostic.c: Include tree-pretty-print.h, tree-pass.h and
        intl.h.
        (default_tree_diagnostic_starter): Make static.
        (default_tree_printer): Move to here. Make static.
        (tree_diagnostics_defaults): New.
        * tree-diagnostic.h (default_tree_diagnostic_starter): Do not declare.
        * tree.c (free_lang_data): Use tree_diagnostics_defaults.
        * toplev.c: Do not include tree-pass.h.
        (default_tree_printer): Move from here.
        (general_init): Use tree_diagnostics_defaults.

2012-04-24  Chao-ying Fu  <fu@mips.com>

        * config.gcc (mips64*-*-linux*): Append mips/linux-common.h to tm_file.
        (mips*-*-linux*): Append mips/linux-common.h to tm_file.
        * config/mips/gnu-user.h
        (SUBTARGET_CC1_SPEC): Use GNU_USER_TARGET_CC1_SPEC directly.
        (GNU_USER_TARGET_LINK_SPEC): New define.
        (LINK_SPEC): Use GNU_USER_TARGET_LINK_SPEC.
        (LIB_SPEC): Use GNU_USER_TARGET_LIB_SPEC directly.
        (GNU_USER_TARGET_MATHFILE_SPEC): New define.
        (ENDFILE_SPEC): Use GNU_USER_TARGET_MATHFILE_SPEC and
        GNU_USER_TARGET_ENDFILE_SPEC.
        * config/mips/gnu-user64.h (LIB_SPEC): Remove.
        (GNU_USER_TARGET_LINK_SPEC): New define.
        (LINK_SPEC): Use GNU_USER_TARGET_LINK_SPEC.
        * config/mips/linux-common.h: New file.

2012-04-24  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

        PR target/47197
        * config/rs6000/rs6000-c.c (fully_fold_convert): New function.
        (altivec_build_resolved_builtin): Call fully_fold_convert.

2012-04-24  Georg-Johann Lay  <avr@gjlay.de>

        PR target/53065
        * config/avr/avr.h (HARD_REGNO_CALL_PART_CLOBBERED): New hook define.

2012-04-24  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53085
        * tree-ssa-pre.c (eliminate): Do not eliminate volatile redundant
        stores.

2012-04-24  Richard Guenther  <rguenther@suse.de>

        * tree-if-conv.c (main_tree_if_conversion): Move bb under
        ENABLE_CHECKING.

2012-04-24  Jim Meyering  <meyering@redhat.com>

        * genattrtab.c (gen_attr): Avoid NULL-deref after diagnosing
        absence of an define_enum call.

2012-04-24  Richard Guenther  <rguenther@suse.de>

        * tree-vect-loop-manip.c (vect_do_peeling_for_loop_bound): If
        the epilogue loop is not re-used as unvectorized version
        record the its maximum number of iterations.

2012-04-24  Andrew Pinski  <apinski@cavium.com>

        * tree-ssa-forwprop.c (simplify_bitwise_binary):
        Don't directly use def1/def2.

2012-04-24  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53098
        * tree-vect-loop.c (vect_analyze_loop_operations): Fixup
        comparison sign.

2012-04-24  Andrew Pinski  <apinski@cavium.com>

        PR tree-opt/33512
        * tree-ssa-forwprop.c (defcodefor_name): New function.
        (simplify_bitwise_binary): Use defcodefor_name instead of manually
        Simplify "( X | Y) & X" to X and "( X & Y) | X" to X.
        Simplify "(~X | Y) & X" to "X & Y" and
        "(~X & Y) | X" to "X | Y".

2012-04-24  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * recog.c (insn_invalid_p): Add IN_GROUP parameter and use
        validate_change to add clobbers if IN_GROUP is nonzero.
        (verify_changes): Call insn_invalid_p with IN_GROUP set to true.
        * recog.h (insn_invalid_p): Add IN_GROUP parameter to function
        prototype.
        * gcse.c (process_insert_insn): Call insn_invalid_p with IN_GROUP
        set to false.
        * config/s390/s390.c (insn_invalid_p): Likewise.

2012-04-24  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/53084
        * varasm.c (compute_reloc_for_constant): Handle ADDR_EXPR of MEM_REF.
        (output_addressed_constants): Likewise.

        PR middle-end/52999
        * varasm.c (get_section): Don't ICE for section conflicts with
        built-in section kinds.

2012-04-23  DJ Delorie  <dj@redhat.com>

        * config/s390/s390.h (LINK_SPEC): Remove, no longer needed.
        (LIBSTDCXX): Change to CPP2.

2012-04-23  H.J. Lu  <hongjiu.lu@intel.com>

        PR bootstrap/52878
        * opth-gen.awk: Check if MASK_ and TARGET_ macros are defined for
        extra_masks.

2012-04-23  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*add<mode>_2): Add r/r/0 alternative.
        (*addsi_2_zext): Ditto.
        (*add<mode>_3): Ditto.
        (*addsi_3_zext): Ditto.
        (*add<mode>_5): Ditto.

2012-04-23  Andrew Pinski  <apinski@cavium.com>

        * tree-ssa-forwprop.c (simplify_bitwise_binary): Simplify (A & B) OP0
        (C & B) to (A OP0) & B.

2012-04-23  Martin Jambor  <mjambor@suse.cz>

        * expr.c (expand_expr_real_1): Remove setting parent's alias set for
        temporaries created for a bitfield (reverting revision 122014).

2012-04-23  Richard Guenther  <rguenther@suse.de>

        * tree-vect-loop-manip.c (slpeel_add_loop_guard): Gimplify
        the condition using is_gimple_condexpr and avoid the not necessary
        boolification.
        (set_prologue_iterations): Likewise.
        (vect_loop_versioning): Likewise.

2012-04-23  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53070
        * tree-if-conv.c (combine_blocks): Free predicates in all blocks.
        (main_tree_if_conversion): Verify we succeeded in that.

2012-04-23  Jan Hubicka  <jh@suse.cz>

        * lto-symtab.c (lto_cgraph_replace_node): Do not call
        mark_reahcable_node.
        * cgraph.c (cgraph_remove_node): Do not clear reachable.
        (cgraph_mark_reachable_node): Remove.
        (cgraph_mark_force_output_node): Do not set reachable.
        (dump_cgraph_node): Do not dump reachable.
        (cgraph_create_virtual_clone): Do not set reachable.
        * cgraph.h (cgraph_node): Remove reachable flag.
        (varpool_node): Remove reachable flag.
        (cgraph_mark_if_needed): Remove.
        (cgraph_mark_reachable_node): Remove.
        * tree-emutls.c (ipa_lower_emutls): Do not check reachable.
        * cgraphunit.c (cgraph_finalize_function): Do not mark node as
        reachable.
        (cgraph_add_new_function): Likewise.
        (cgraph_mark_if_needed): Remove.
        (cgraph_analyze_function): Do not set target as reachable.
        (process_function_and_variable_attributes): Do not care about
        dllexport.
        (cgraph_analyze_functions): Do not set reachable flags.
        (cgraph_mark_functions_to_output): Do not check reachability.
        (cgraph_copy_node_for_versioning): Do not set reachable flag.
        (dbxout_expand_expr): Update.
        * c-decl.c (merge_decls): Do not track changed externs.
        * ipa.c: Include pointer-set.h
        (enqueue_cgraph_node): Use reachable pointer set.
        (process_references): Likewise.
        (cgraph_remove_unreachable_nodes): Likewise.
        (whole_program_function_and_variable_visibility): Do not recompute
        reachable.
        * trans-mem.c (ipa_tm_execute): Do not check reachable flag.

2012-04-23  Georg-Johann Lay  <avr@gjlay.de>

        * doc/extend.texi (AVR Named Address Spaces): Fix typos.

2012-04-23  Richard Guenther  <rguenther@suse.de>

        PR c/53060
        * c-typeck.c (build_binary_op): Fix typo.

2012-04-23  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimizations/52891
        * tree-vect-patterns.c (adjust_bool_pattern): Use
        build_nonstandard_type even if rhs1 has unsigned INTEGER_TYPE,
        but with non-standard precision.

2012-04-22  Jan Hubicka  <jh@suse.cz>

        * tree-ssa-loop-ivopts.c (expr_invariant_in_loop_p): Bail out at NULL
        tree refs.

2012-04-22  Jan Hubicka  <jh@suse.cz>

        * lto-symtab.c (lto_varpool_replace_node): Do not merge needed flags.
        * cgraphbuild.c (record_reference, record_type_list, mark_address,
        mark_load, mark_store): Do not mark varpool nodes as needed.
        * cgraph.c (cgraph_new_nodes): Remove.
        (cgraph_create_function_alias): Do not mark nodes as reachable.
        (cgraph_add_thunk): Likewise.
        (cgraph_mark_reachable_node): Do not manage the queue.
        * cgraph.h (cgraph_node): Remove next_needed.
        (varpool_nodes_queue): Remove next_needed and prev_needed.
        (x_cgraph_nodes_queue, x_cgraph_nodes_queue, cgraph_new_nodes): Remove.
        (cgraph_new_nodes): Declare.
        (x_varpool_nodes_queue, varpool_nodes_queue); Remove.
        (varpool_analyze_pending_decls): Remove.
        (varpool_analyze_node): New.
        (varpool_mark_needed_node): Remove.
        (varpool_first_variable, varpool_next_variable): New inlines.
        (varpool_first_static_initializer, varpool_next_static_initializer):
        Update.
        (FOR_EACH_STATIC_VARIABLE): Remove unused walker.
        (varpool_first_defined_variable): New inline.
        (varpool_next_defined_variable): New inline
        (FOR_EACH_VARIABLE): Reimplement.
        (FOR_EACH_DEFINED_VARIABLE): Reimplement.
        * toplev.c (wrapup_global_declaration_2): Use analyzed instead of
        needed flag.
        * cgraphunit.c (cgraph_new_nodes): Declare here.
        (enqueue_node): New function.
        (cgraph_process_new_functions): update for new
        node set; when constructing cgraph enqueue node for processing.
        (cgraph_add_new_function): Use new node set.
        (process_function_and_variable_attributes): Do not set varpool needed
        flags.
        (referred_to_p): New function.
        (varpool_finalize_decl): Move here from varpool.c; enqueue needed node
        when varpool is in construction.
        (cgraph_analyze_functions): Rewrite.
        (cgraph_expand_all_functions): Update.
        (cgraph_output_in_order): Do not analyze pending decls; do not set
        needed flags.
        (cgraph_optimize): Do not analyze pending decls.
        * lto-cgraph.c (input_varpool_node): Clear analyzed flag for objects
        in other partition; do not mark node as needed.
        * dwarf2out.c (reference_to_unused): Use analyzed flag.
        (premark_types_used_by_global_vars_helper): Likewise.
        * ipa.c (process_references): Do not call varpool_mark_needed_node.
        (cgraph_remove_unreachable_nodes): Do not rely on varpool and
        cgrpah queues.
        (function_and_variable_visibility): Do not mark node as needed.
        (whole_program_function_and_variable_visibility): Likewise.
        * Makefile.in (gt-varpool.h): No longer needed.
        * passes.c (execute_one_pass, execute_ipa_pass_list): Update.
        (ipa_write_summaries): Do not use needed flag.
        * varpool.c: Do not include gt-varpool.h
        (x_varpool_nodes_queue, x_varpool_last_needed_node,
        x_varpool_last_needed_node, x_varpool_first_unanalyzed_node,
        x_varpool_first_unanalyzed_node, varpool_assembled_nodes_queue):
        Remove.
        (varpool_remove_node): Do not update the lists.
        (dump_varpool_node): Do not dump needed flag.
        (varpool_enqueue_needed_node): Remove.
        (varpool_mark_needed_node): Remove.
        (varpool_reset_queue): Remove.
        (varpool_finalize_decl): Move to cgraphunit.c
        (varpool_analyze_node): New functions based on former
        varpool_analyze_pending_decls.
        (varpool_analyze_pending_decls): Remove.
        (varpool_assemble_decl): Do not update the lists.
        (enqueue_node): New function.
        (varpool_remove_unreferenced_decls): Rewrite.
        (varpool_empty_needed_queue): Remove.
        (add_new_static_var): Do not mark node as needed.
        (varpool_create_variable_alias): Handle expansion state
        creation.
        * except.c (output_ttype): Do not mark node as needed.
        * varasm.c (mark_decl_referenced): Do not use mark_needed_node.
        * tree-profile.c (init_ic_make_global_vars, init_ic_make_global_vars):
        Likewise.
        * tree-switch-conversion.c (build_one_array): Likewise.

2012-04-22  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR c/44774
        * doc/invoke.texi (pedantic): Rename to Wpedantic.
        * common.opt (Wpedantic): New.
        (pedantic): Alias Wpedantic.
        * diagnostic.c (warning_at): Likewise.
        * c-decl.c (diagnose_mismatched_decls): Likewise.
        (build_array_declarator): Likewise.
        (mark_forward_parm_decls):
        (check_bitfield_type_and_width): Likewise.
        (grokdeclarator): Likewise.
        (grokfield): Likewise.
        (finish_struct): Likewise.
        (build_enumerator): Likewise.
        (store_parm_decls_oldstyle): Likewise.
        (declspecs_add_qual): Likewise.
        (declspecs_add_type): Likewise.
        (finish_declspecs): Likewise.
        * c-typeck.c (composite_type): Likewise.
        (comp_target_types): Likewise.
        (build_array_ref): Likewise.
        (pointer_diff): Likewise.
        (build_unary_op): Likewise.
        (build_conditional_expr): Likewise.
        (build_c_cast): Likewise.
        (convert_for_assignment): Likewise.
        (maybe_warn_string_init): Likewise.
        (digest_init): Likewise.
        (pop_init_level): Likewise.
        (set_init_index): Likewise.
        (c_finish_goto_label): Likewise.
        (c_finish_return): Likewise.
        (do_case): Likewise.
        (build_binary_op): Likewise.
        * c-parser.c (static): Likewise.
        (c_parser_external_declaration): Likewise.
        (c_parser_declaration_or_fndef): Likewise.
        (c_parser_static_assert_declaration_no_se): Likewise.
        (c_parser_enum_specifier): Likewise.
        (c_parser_struct_or_union_specifier): Likewise.
        (c_parser_struct_declaration): Likewise.
        (c_parser_alignas_specifier): Likewise.
        (c_parser_braced_init): Likewise.
        (c_parser_initelt): Likewise.
        (c_parser_compound_statement_nostart): Likewise.
        (c_parser_conditional_expression): Likewise.
        (c_parser_alignof_expression): Likewise.
        (c_parser_postfix_expression): Likewise.
        (c_parser_postfix_expression_after_paren_): Likewise.
        (c_parser_objc_class_instance_variables): Likewise.
        (c_parser_objc_method_definition): Likewise.
        (c_parser_objc_methodprotolist): Likewise.

2012-04-22  Ian Lance Taylor  <iant@google.com>

        * godump.c (go_output_typedef): Dump size of structs.

2012-04-22  Razya Ladelsky  <razya@il.ibm.com>

        Correcting transform_to_exit_first_loop + fix to PR46886
        * tree-parloops.c (transform_to_exit_first_loop): Remove
        setting of number of iterations according to the loop pattern.
        Duplicate from entry to exit->src instead of loop->latch.
        (pallelize_loops): Remove the condition preventing do-while loops.
        * tree-cfg.c (bool bb_in_region_p): New.
        (gimple_duplicate_sese_tail): Adjust duplication of the the subloops.
        Adjust redirection of the duplicated iteration.

2012-04-21  Richard Sandiford  <rdsandiford@googlemail.com>

        PR bootstrap/53021
        * rtl.def (ADDRESS): Use "i" rather than "w".
        * rtl.h (find_base_term): Delete.
        (may_be_sp_based_p): Declare.
        * rtl.c (rtx_code_size): Remove ADDRESS special case.
        * alias.h (UNIQUE_BASE_VALUE_SP, UNIQUE_BASE_VALUE_ARGP)
        (UNIQUE_BASE_VALUE_FP, UNIQUE_BASE_VALUE_HFP): Move to...
        * alias.c: ...here.
        (find_base_term): Make static.
        (may_be_sp_based_p): New function.
        * dse.c (record_store): Use it.
        * store-motion.c (store_killed_in_insn): Likewise.

2012-04-21  Richard Sandiford  <rdsandiford@googlemail.com>

        * fold-const.c (fold_checksum_tree): Fix VECTOR_CST case.

2012-04-21  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR 35441
        * c-typeck.c (inform_declaration): New.
        (build_function_call_vec):  Do not pretty-print
        expressions when caret is enabled.
        (convert_arguments): Use inform_declaration.

2012-04-20  Jim Meyering  <meyering@redhat.com>

        * genmodes.c (make_complex_modes): Don't truncate a mode name of
        length 7 or more when prepending a "C".  Suggested by Richard Guenther.

2012-04-20  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

        PR rtl-optimization/44214
        * fold-const.c (exact_inverse): New function.
        (fold_binary_loc): Fold vector and complex division by constant into
        multiply by recripocal with flag_reciprocal_math; fold vector division
        by constant into multiply by reciprocal with exact inverse.

2012-04-20  Jan Hubicka  <jh@suse.cz>

        * lto-symtab.c (lto_cgraph_replace_node): Merge needed instead of
        force flags.
        * cgraph.c (cgraph_add_thunk): Use mark_reachable_node.
        (cgraph_remove_node): Update.
        (cgraph_mark_needed_node): Remove.
        (cgraph_mark_force_output_node): New.
        (dump_cgraph_node): Do not dump needed flag.
        (cgraph_node_cannot_be_local_p_1): Update.
        (cgraph_can_remove_if_no_direct_calls_and_refs): Update.
        * cgraph.h (symtab_node_base): Add force_output flag.
        (cgraph_node): Remove needed flag.
        (varpool_node): Remove force_output flag.
        (cgraph_mark_needed_node): Remove.
        (cgraph_mark_force_output_node): New.
        (cgraph_only_called_directly_or_aliased_p,
        varpool_can_remove_if_no_refs, varpool_all_refs_explicit_p): Update.
        * ipa-cp.c (ipcp_generate_summary): Remove out of date assert.
        * cgraphunit.c (cgraph_decide_is_function_needed): rewrite.
        (cgraph_add_new_function): Update.
        (cgraph_mark_if_needed): Update.
        (verify_cgraph_node): Update.
        (cgraph_analyze_function): Alias target is reachable.
        (process_function_and_variable_attributes): Update: externally_visible
        flag makes function reachable.
        (cgraph_analyze_functions): Update dumping.
        * lto-cgraph.c (lto_output_node, lto_output_varpool_node,
        input_overwrite_node, input_varpool_node): Update streaming.
        * lto-streamer-out.c (produce_symtab): Use force_output.
        * ipa.c (process_references): Weakrefs must be processed.
        (cgraph_remove_unreachable_nodes): Likewise; update for new
        force_output flag.
        (varpool_externally_visible_p): Weakrefs are externally visible
        even if they are not.
        (function_and_variable_visibility): Update; when processing alias
        pair force the targets to be output.
        (whole_program_function_and_variable_visility): Use
        mark_reachable_node.
        * trans-mem.c (ipa_tm_mark_needed_node): Remove
        (ipa_tm_mark_force_output_node): New function.
        (ipa_tm_create_version_alias, ipa_tm_create_version): Update.
        * gimple-fold.c (can_refer_decl_in_current_unit_p): Be lax about
        aliases.
        * varasm.c (mark_decl_referenced): Update.
        (find_decl_and_mark_needed): Remove.
        (find_decl): New function.
        (weak_finish, finish_aliases_1, assemble_alias): Update; do not mark
        alias targets as needed.
        (dump_tm_clone_pairs): Update.
        * tree-inline.c (copy_bb): Update check.
        * symtab.c (dump_symtab_base): Dump force_output.
        * tree-ssa-structalias.c (ipa_pta_execute): Use force_output.
        * passes.c (execute_todo): Fix dumping.
        * varpool.c (decide_is_variable_needed, varpool_finalize_decl): Update.
        (varpool_analyze_pending_decls): Alias target is reachable.
        (varpool_create_variable_alias): Finalize weakrefs.

2012-04-20  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/53021
        * alias.h (UNIQUE_BASE_VALUE_SP, UNIQUE_BASE_VALUE_ARGP,
        UNIQUE_BASE_VALUE_FP, UNIQUE_BASE_VALUE_HFP): Define.
        * alias.c (init_alias_targets): Use UNIQUE_BASE_VALUE_*
        macros instead of constants.
        * dse.c (record_store): Check for SP ADDRESS by comparing
        XWINT to UNIQUE_BASE_VALUE_SP instead of expecting
        XEXP to be stack_pointer_rtx.

2012-04-20  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-copy.c (propagate_tree_value_into_stmt): Use
        update_call_from_tree when propagating into a call.

2012-04-20  Alan Modra  <amodra@gmail.com>

        * config/rs6000/rs6000.c (rs6000_emit_savres_rtx): Formatting.
        (rs6000_emit_prologue, rs6000_emit_epilogue): Likewise.  Rename
        sp_offset to frame_off.  Move world save code earlier.

2012-04-20  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53050
        * tree-ssa-forwprop.c (ssa_forward_propagate_and_combine):
        Do only one transform on COND_EXPRs at the same time.

2012-04-19  Jan Hubicka  <jh@suse.cz>

        * symtab.c (dump_symtab_base): Revert accidental checkin.

2012-04-20  Alan Modra  <amodra@gmail.com>

        PR target/53040
        * config/rs6000/rs6000.c (rs6000_savres_strategy): When using
        static chain, set REST_INLINE_FPRS too.

2012-04-20  Thomas Schwinge  <thomas@codesourcery.com>

        * tree-dump.c (dequeue_and_dump) <BIT_FIELD_REF>: Dump the three child
        nodes.

2012-04-20  Richard Guenther  <rguenther@suse.de>

        * tree-vect-loop.c (vect_analyze_loop_operations): Do not vectorize
        loops that can never run more often than the vectorization factor.

2012-04-19  Jan Hubicka  <jh@suse.cz>

        * symtab.c (dump_symtab_base): Fix dumping of asm lists.

2012-04-19  David Edelsohn  <dje.gcc@gmail.com>

        * config/rs6000/sync.md (fetchop_name): Change ior attribute to "or".

2012-04-19  Jim Meyering  <meyering@redhat.com>

        * genmodes.c (make_complex_modes): Avoid unnecessary use of strncpy.
        We verified above that the string(including trailing NUL) fits in buf,
        so just use memcpy.

2012-04-19  Richard Guenther  <rguenther@suse.de>

        * symtab.c (dump_symtab_base): Use TREE_STRING_POINTER
        for dumping DECL_SECTION_NAME.

2012-04-19  Michael Matz  <matz@suse.de>

        PR middle-end/52977
        * tree.h (VECTOR_CST_NELTS): Use part number of types again.
        (struct tree_vector): Adjust GTY length.
        * tree.c (make_vector_stat): Don't set VECTOR_CST_NELTS.

        * gengtype.c (struct walk_type_data): Add in_record_p and loopcounter
        members.
        (walk_type, <TYPE_POINTER, TYPE_ARRAY>): Handle case where our
        caller emitted the length calulation already.
        (walk_type, <TYPE_UNION, TYPE_STRUCT>): Emit length calculations
        before handling any of the fields for structs.

2012-04-19  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/53031
        * tree-vrp.c (adjust_range_with_scev): Revert back to
        using max_loop_iterations.

2012-04-19  Michael Matz  <matz@suse.de>

        * diagnostic.c (emit_diagnostic): Move va_end call after user
        of the va_list.
        (warning, warning_at, pedwarn, permerror): Ditto.

2012-04-19  Richard Guenther  <rguenther@suse.de>

        * ira-int.h (ira_allocno_object_iter_cond): Avoid out-of-bound
        array access.

2012-04-19  Georg-Johann Lay  <avr@gjlay.de>

        PR target/53033
        * config/avr/avr.c (avr_out_load_psi): Fix assembler template for
        the case *(X+const).

2012-04-19  Ramana Radhakrishnan  <ramana.radhakrishnan@linaro.org>

        * config/arm/sync.md (sync_optab): Change ior attribute to "or".

2012-04-19  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR c/52283/37985
        * stmt.c (warn_if_unused_value): Skip NOP_EXPR.
        * convert.c (convert_to_integer): Don't set TREE_NO_WARNING.

2012-04-19  Richard Guenther  <rguenther@suse.de>

        PR rtl-optimization/44688
        * loop-iv.c (determine_max_iter): Only return max_iter.
        (iv_number_of_iterations): Also use the recorded loop bound
        on the maximum number of iterations.
        * loop-unroll.c (decide_unroll_runtime_iterations): Use
        max_iter to avoid unrolling loops that do not roll.
        (decide_unroll_stupid): Likewise.

2012-04-18  Steven Bosscher  <steven@gcc.gnu.org>

        * targhooks.c (default_case_values_threshold): Fix code style nit.

        * stmt.c (add_case_node, expand_case): Move logic to remove/reduce
        case range and type folding from here...
        * gimplify.c (gimplify_switch_expr): ... to here.  Expect NULL_TREE
        type, as documented in tree.def.

2012-04-18  Jan Hubicka  <jh@suse.cz>

        * cgraph.h (verify_symtab, verify_symtab_node, verify_symtab_base):
        Declare.
        * cgraphunit.c (verify_cgraph_node): Verify symtab base; do not verify
        cgraph hash and same comdat groups.
        (cgraph_optimize): Verify symbol table.
        * ipa.c (cgraph_remove_unreachable_nodes): Verify symbol table.
        (dissolve_same_comdat_group_list): Work on symtab nodes.
        (function_and_variable_visibility): Dissolve variable same comdat group
        lists, too.
        * symtab.c: Include timevar.h
        (verify_symtab_base, verify_symtab_node, verify_symtab): New functions.

2012-04-18  Steven Bosscher  <steven@gcc.gnu.org>

        * tree-switch-conversion.c (info): Remove global pass info.
        (check_range, check_process_case, check_final_bb, create_temp_arrays,
        free_temp_arrays, gather_default_values, build_constructors,
        array_value_type, build_one_array, build_arrays, gen_def_assigns,
        fix_phi_nodes, gen_inbound_check): Pass info around from ...
        (process_switch): ... here.  Unify message format.  Return a const
        char pointer to the failure reason message.
        (do_switchconv): Unify message format.  Update process_switch usage.

        * tree.def (CASE_LABEL_EXPR): Fix documentation, mention all operands.
        * tree-cfg.c (edge_to_cases): Fix documentation.

2012-04-18  Uros Bizjak  <ubizjak@gmail.com>

        * config/alpha/sync.md (fetchop_name): Change ior attribute to "or".

2012-04-18  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

        PR tree-optimization/52976
        * tree-ssa-reassoc.c (add_to_ops_vec_max_rank): Delete.
        (possibly_move_powi): New function.
        (rewrite_expr_tree): Call possibly_move_powi.
        (rewrite_expr_tree_parallel): Likewise.
        (attempt_builtin_powi): Change call of add_to_ops_vec_max_rank to
        call add_to_ops_vec instead.

2012-04-18  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

        PR tree-optimization/52976
        * tree-ssa-reassoc.c (stmt_is_power_of_op): New function.
        (decrement_power): Likewise.
        (propagate_op_to_single_use): Likewise.
        (zero_one_operation): Handle __builtin_pow* calls in linearized
        expression trees; factor logic into propagate_op_to_single_use.
        (undistribute_ops_list): Allow operands with repeat counts > 1.

2012-04-18  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/44688
        * cfgloop.h (record_niter_bound): Declare.
        * tree-ssa-loop-niter.c (record_niter_bound): Export.
        Update the estimation with the upper bound here...
        (estimate_numbers_of_iterations_loop): ... instead of here.
        Do not forcefully reset a recorded upper bound.
        * tree-vect-loop-manip.c (vect_do_peeling_for_alignment):
        Record the maximum number of loop iterations of the prologue loop.

2012-04-18  Jan Hubicka  <jh@suse.cz>

        * lto-symtab.c (lto_cgraph_replace_node): Update.
        * cgraphbuild.c (record_reference, record_type_list,
        record_eh_tables, mark_address, mark_load, mark_store): Update.
        * cgraph.c (cgraph_same_body_alias, dump_cgraph_node,
        cgraph_create_virtual_clone, cgraph_for_node_thunks_and_aliases):
        Update.
        * cgraph.h (symtab_node_def, symtab_node, const_symtab_node): Remove.
        (cgraph_alias_aliased_node, varpool_alias_aliased_node): Update.
        * reload.c: Fix typo in comment.
        * rtlanal.c: Likewise.
        * tree-emultls.c (gen_emutls_addr): Update.
        * ipa-reference.c (analyze_function): Update.
        * cgraphunit.c (cgraph_analyze_function,
        cgraph_process_same_body_aliases, assemble_thunks_and_aliases):
        Update.
        * ipa-ref.c (ipa_record_reference): Reorg to avoid reference types.
        (ipa_remove_reference): Likewise.
        (ipa_remove_all_refering): Rename to ...
        (ipa_remove_all_referring): ... this one; update.
        (ipa_dump_references): Update.
        (ipa_dump_referring): Update.
        (ipa_clone_references): Update.
        (ipa_clone_refering): Rename to ...
        (ipa_clone_referring): ... this one; update.
        (ipa_ref_cannot_lead_to_return): Update.
        (ipa_ref_has_aliases_p): Update.
        * ipa-ref.h (symtab_node_def, symtab_node, const_symtab_node): New
        forward typedefs.
        (ipa_ref_type): Remove.
        (ipa_ref_ptr_u): Remove.
        (ipa_ref): Remove referencing, refered, refered_index, refering_type
        and refered_type; add referring, referred and referred_index.
        (ipa_ref_list): Rename refering to referring.
        (ipa_record_reference, ipa_remove_all_referring, ipa_dump_referring,
        ipa_clone_references, ipa_clone_referring): Update prototypes.
        * lto-cgraph.c (referenced_from_other_partition_p): Update.
        (lto_output_ref): Update.
        (add_references): Update.
        (input_varpool_node): Update.
        (input_refs): Update.
        * ipa-ref-inline.h (ipa_ref_node): Update.
        (ipa_ref_varpool_node): Update.
        (ipa_ref_referring_node): Update.
        (ipa_ref_referring_varpool_node): Update.
        (ipa_ref_referring_ref_list): Update.
        (ipa_ref_referred_ref_list): Update.
        (ipa_ref_list_first_referring): Update.
        (ipa_empty_ref_list): Update.
        (ipa_ref_list_refering_iterate): Rename to ...
        (ipa_ref_list_referring_iterate): ... this one.
        * cse.c: Update comment.
        * ipa-utils.c (ipa_reverse_postorder): Update.
        * tree-ssa-alias.c: Update.
        * ipa-inline.c (reset_edge_caches): Update.
        (update_caller_keys): Update.
        * ipa-inline.h: Update comments.
        * jump.c: Update comment.
        * alias.c: Likewise.
        * ipa.c (process_references): Update.
        (cgraph_remove_unreachable_nodes): Likewise.
        (ipa_discover_readonly_nonaddressable_var): Likewise.
        (cgraph_address_taken_from_non_vtable_p): Likewise.
        * trans-mem.c (ipa_tm_execute): Update.
        * simplify-rtx.c: Fix comment.
        * rtl.c: Fix comment.
        * symtab.c (symtab_unregister_node): Update.
        * varpool.c (dump_varpool_node): Update.
        (varpool_analyze_pending_decls): Update.
        (assemble_aliases): Update.
        (varpool_for_node_and_aliases): Update.

2012-04-18  Richard Guenther  <rguenther@suse.de>

        * cfgloop.h (estimate_numbers_of_iterations_loop): Remove
        use_undefined_p parameter.
        * tree-flow.h (estimate_numbers_of_iterations): Likewise.
        * tree-ssa-loop-niter.c (estimate_numbers_of_iterations_loop):
        Likewise.
        (estimate_numbers_of_iterations): Likewise.
        (estimated_loop_iterations): Adjust.
        (max_loop_iterations): Likewise.
        (scev_probably_wraps_p): Likewise.
        * tree-ssa-loop.c (tree_ssa_loop_bounds): Likewise.
        * tree-vrp.c (adjust_range_with_scev): Use max_stmt_executions,
        not max_loop_iterations.
        (execute_vrp): Remove explicit number of iterations estimation.

2012-04-18  Enkovich Ilya  <ilya.enkovich@intel.com>

        * config/i386/linux-common.h: New.

        * config.gcc: Add i386/linux-common.h before
        all i386/linux.h and i386/linux64.h usages.

        * config/i386/gnu-user.h (GNU_USER_TARGET_LINK_SPEC): New.
        (LINK_SPEC): Use GNU_USER_TARGET_LINK_SPEC.
        * config/i386/gnu-user64.h: Likewise.

        * config/i386/gnu-user.common.h (GNU_USER_TARGET_CC1_SPEC): New.
        (CC1_SPEC): Use GNU_USER_TARGET_CC1_SPEC.
        (GNU_USER_TARGET_MATHFILE_SPEC): New.
        (ENDFILE_SPEC): Use GNU_USER_TARGET_MATHFILE_SPEC.

2012-04-18  Jan Hubicka  <jh@suse.cz>

        * cgraph.c (cgraph_node_name): Remove.
        (dump_cgraph_node): Use dump_symtab_base; reformat.
        * cgraph.h (symtab_node_asm_name, symtab_node_name, dump_symtab,
        debug_symtab, dump_symtab_node, debug_symtab_node, dump_symtab_base):
        Declare.
        (cgraph_node_name, varpool_node_name): Remove.
        (cgraph_node_asm_name, varpool_node_asm_name,
        cgraph_node_name, varpool_node_name): New.
        * tree-pass.h (TODO_dump_cgraph): Rename to ...
        (TODO_dump_symtab): ... this one.
        * ipa-cp (pass_ipa_cp): Update.
        * ia-reference.c (generate_summary, read_write_all_from_decl,
        propagate, ipa_reference_read_optimization_summary): Update.
        * cgraphunit.c (cgraph_analyze_functions): Update.
        (cgraph_optimize): Update.
        * ipa-ref.c (ipa_dump_references): Update.
        (ipa_dump_refering): Update.
        * ipa-inline.c (pass_ipa_inline): Update.
        * matrix-reorg.c (pass_ipa_matrix_reorg): Update.
        * ipa.c (pass_ipa_function_visibility,
        pass_ipa_whole_program_visibility): Update.
        * tree-sra.c (pass_early_ipa_sra): Update.
        * symtab.c: Include langhooks.h
        (symtab_node_asm_name): New.
        (symtab_node_name): New.
        (symtab_type_names): New static var.
        (dump_symtab_base): New.
        (dump_symtab_node, dump_symtab): New.
        (debug_symtab_node,  debug_symtab): New.
        * tree-ssa-structalias.c: Dump symbol table.
        * pases.c (execute_todo): Handle TODO_dump_symtab instead
        of TODO_dump_cgraph.
        * varpoo.c (varpool_node_name): Remove.
        (dump_varpool_node): Use dump_symtab_base; reformat.

2012-04-18  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        * doc/invoke.texi (Language Independent Options): @item should be
        before @opindex.

2012-04-17  Richard Sandiford  <rdsandiford@googlemail.com>

        PR bootstrap/53021
        * rtl.c (rtx_code_size): Handle ADDRESS.

2012-04-17  Tom de Vries  <tom@codesourcery.com>

        * tree-iterator.c (append_to_statement_list_1): Handle case that *list_p
        is not a STMT_LIST.

2012-04-17  Uros Bizjak  <ubizjak@gmail.com>

        PR target/53020
        * config/i386/sync.md (atomic_<code><mode>): Rename to
        atomic_<logic><mode>.

2012-04-17  Richard Sandiford  <rdsandiford@googlemail.com>

        * rtl.def (ADDRESS): Turn operand into a HOST_WIDE_INT.
        * alias.c (reg_base_value): Expand and update comment.
        (arg_base_value): New variable.
        (unique_id): Move up file.
        (unique_base_value, unique_base_value_p, known_base_value_p): New.
        (find_base_value): Use arg_base_value and known_base_value_p.
        (record_set): Document REG_NOALIAS handling.  Use unique_base_value.
        (find_base_term): Use known_base_value_p.
        (base_alias_check): Use unique_base_value_p.
        (init_alias_target): Initialize arg_base_value.  Use unique_base_value.
        (init_alias_analysis): Use 1 as the first id for REG_NOALIAS bases.

2012-04-17  Pat Haugen <pthaugen@us.ibm.com>

        * config/rs6000/rs6000.h (SLOW_UNALIGNED_ACCESS): Remove DImode.

2012-04-17  Michael Matz  <matz@suse.de>

        PR tree-optimization/18437
        * tree-vectorizer.h (_stmt_vec_info.stride_load_p): New member.
        (STMT_VINFO_STRIDE_LOAD_P): New accessor.
        (vect_check_strided_load): Declare.
        * tree-vect-data-refs.c (vect_check_strided_load): New function.
        (vect_analyze_data_refs): Use it to accept strided loads.
        * tree-vect-stmts.c (vectorizable_load): Ditto and handle them.

2012-04-17  Richard Guenther  <rguenther@suse.de>

        PR middle-end/53011
        * tree-eh.c (cleanup_empty_eh_merge_phis): Properly discard
        loops when redirecting an entry or latch edge.

2012-04-17  Bernd Schmidt  <bernds@codesourcery.com>

        * sel-sched.c (sel_global_init): Revert previous change.

2012-04-17  Richard Guenther  <rguenther@suse.de>

        * tree-flow.h (array_at_struct_end_p): Move declaration ...
        * tree.h (array_at_struct_end_p): ... here.
        * tree-ssa-loop-niter.c (array_at_struct_end_p): Move ...
        * expr.c (array_at_struct_end_p): ... here.  Rewrite.

2012-04-17  Steven Bosscher  <steven@gcc.gnu.org>

        * stmt.c (cost_table_, use_cost_table, cost_table_initialize,
        COST_TABLE): Remove.
        (estimate_case_costs): Remove.
        (expand_case): Do not call estimate_case_costs
        to set use_cost_table.
        (balance_case_nodes): Do not use use_cost_table.

2012-04-16  Jan Hubicka  <jh@suse.cz>

        * cgraph.c (cgraph_hash, assembler_name_hash): Remove.
        (hash_node, eq_node): Remove.
        (cgraph_create_node): Do not handle hashtable.
        (cgraph_get_node): Remove.
        (cgraph_insert_node_to_hashtable): Remove.
        (hash_node_by_assembler_name): Remove.
        (eq_assembler_name): Remove.
        (cgraph_node_for_asm): Rewrite.
        (cgraph_find_replacement_node): Break out from ...
        (cgraph_remove_node): ... here; do not maintain hashtables.
        (change_decl_assembler_name): Remove.
        (cgraph_clone_node): Do not maintain hashtables.
        * cgraph.h (const_symtab_node): New typedef.
        (cgraph_insert_node_to_hashtable): Remove.
        (symtab_get_node, symtab_node_for_asm,
        symtab_insert_node_to_hashtable): Declare.
        (cgraph_find_replacement_node): Declare.
        (cgraph_get_node, varpool_get_node): Turn into inlines.
        (cgraph, varpool): Work sanely on NULL pointers.
        (FOR_EACH_SYMBOL): New walker.
        * ipa-inline-transform.c (save_inline_function_body): Use
        symtab_insert_node_to_hashtable.
        * symtab.c: Include ggc.h and diagnostics.h
        (symtab_hash, assembler_name_hash): New static vars;
        (hash_node, eq_node, hash_node_by_assembler_name,
        eq_assembler_name, insert_to_assembler_name_hash,
        unlink_from_assembler_name_hash): New.
        (symtab_register_node): Update hashtables.
        (symtab_insert_node_to_hashtable): New.
        (symtab_unregister_node): Update hashtables.
        (symtab_get_node): New.
        (symtab_node_for_asm): New.
        (change_decl_assembler_name): New.
        * Makefile.in (symtab.o): Needs GTY.
        * varpool.c (varpool_hash): Remove.
        (hash_varpool_node, eq_varpool_node, varpool_get_node): Remove.
        (varpool_node): Rewrite using varpool_get_node.
        (varpool_remove_node): DO not maintain hashtables.
        (varpool_node_for_asm): Rewrite.

2012-04-16  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/invoke.texi:  Copy-edit to put verbs in the present tense
        when describing the current behavior of GCC.

2012-04-16  Richard Sandiford  <rdsandiford@googlemail.com>

        * genemit.c (gen_exp): Remove ADDRESS handling.
        * genoutput.c (scan_operands): Likewise.
        * genpeep.c (match_rtx): Likewise.
        * genrecog.c (add_to_sequence): Likewise.

2012-04-16  David Edelsohn  <dje.gcc@gmail.com>

        * doc/install.texi (Specific, *-ibm-aix*): Update assembler bug status.

2012-04-16  Martin Jambor  <mjambor@suse.cz>

        * tree-sra.c (build_ref_for_model): Create COMPONENT_REFs only for
        bit-fields.

2012-04-16  Ulrich Weigand  <ulrich.weigand@linaro.org>

        PR target/51819
        * config/arm/arm.c (arm_print_operand): Fix invalid alignment
        hints for 'A' operand types.

2012-04-16  Jan Hubicka  <jh@suse.cz>

        * cgraph.h (symtab_node_base): Add next and previous pointers.
        (cgraph_node): Remove next and preivous pointers.
        (varpool_node): Likewise; remove next/previous GTY marker;
        it is not type safe.
        (symtab_node_def): Update GTY marker
        (x_cgraph_nodes, cgraph_nodes): Remove.
        (symtab_nodes): New function.
        (cgraph_order): Rename to ...
        (symtab_order): ... this one.
        (symtab_register_node, symtab_unregister_node, symtab_remove_node):
        Declare.
        (x_varpool_nodes, varpool_nodes): Remove.
        (FOR_EACH_STATIC_VARIABLE): Update.
        (symtab_function_p, symtab_variable_p): New function.
        (FOR_EACH_VARIABLE): Update.
        (varpool_first_variable, varpool_next_variable): New functions.
        (FOR_EACH_VARIABLE): Update.
        (cgraph_first_defined_function): Update.
        (cgraph_next_defined_function, cgraph_next_defined_function): Update.
        (FOR_EACH_DEFINED_FUNCTION, FOR_EACH_FUNCTION): Update.
        (cgraph_first_function, cgraph_next_function): New.
        (FOR_EACH_FUNCTION): Update.
        (cgraph_first_function_with_gimple_body,
        cgraph_next_function_with_gimple_body): Update.
        * symtab.c: New file.
        * cgraph.c: Update copyright dates.
        (x_cgraph_nodes, cgraph_order): Remove.
        (NEXT_FREE_NODE): Update.
        (SET_NEXT_FREE_NODE): New.
        (cgraph_create_node_1): Remove common code.
        (cgraph_create_node): Remove common code; call symtab_register_node.
        (cgraph_remove_node): Remove common code; call symtab_unregister-node.
        (cgraph_add_asm_node): Update.
        (cgraph_clone_node): Register new node.
        * cgraphunit.c (process_function_and_variable_attributes): Update.
        (cgraph_analyze_functions): Update.
        (cgraph_analyze_functions): Update.
        (cgraph_output_in_order): Update.
        * lto-cgraph.c (input_node, input_varpool_node, input_cgraph_1):
        Update.
        * ipa-inline.c (recursive_inlining): Update.
        * lto-streamer-in.c (lto_input_toplevel_asms): Update.
        * ipa.c (cgraph_remove_unreachable_nodes): Update.
        * Makefile.in: Add symtab.o
        * varpool.c (x_varpool_nodes): Remove
        (varpool_node): Remove common code; call symtab_register_node.
        (varpool_remove_node): Remove common code; call symtab_unregister_node.

2012-04-16  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52977
        * tree.h (VECTOR_CST_NELTS): Adjust.
        (struct tree_vector): Add explicit length field.
        (make_vector_stat): Declare.
        (make_vector): Define.
        * tree.c (make_vector_stat): New function.
        (build_vector_stat): Use it.
        * tree-streamer-in.c (streamer_alloc_tree): Likewise.

2012-04-16  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

        PR tree-optimization/52976
        * tree-ssa-reassoc.c (add_to_ops_vec_max_rank): New function.
        (undistribute_ops_list): Ops with repeat counts aren't eligible for
        undistribution.
        (attempt_builtin_powi): Call add_to_ops_vec_max_rank.

2012-04-16  Jan Hubicka  <jh@suse.cz>

        * cgraph.h (FOR_EACH_VARIABLE, FOR_EACH_VARIABLE, FOR_EACH_FUNCTION):
        New macros.
        * lto-symtab.c (lto_symtab_merge_cgraph_nodes): Use FOR_EACH
        walkers to walk cgraph and varpool.
        * cgraph.c (cgraph_node_for_asm): Likewise.
        (dump_cgraph): Likewise.
        * value-prof.c (init_node_map): Likewise.
        * tree.c (free_lang_data_in_cgraph): Likewise.
        * tree-emutls.c: (ipa_lower_emutls): Likewise.
        * ipa-reference.c (generate_summary, propagate): Likewise.
        * cgraphunit.c (verify_cgraph, cgraph_process_same_body_aliases,
        cgraph_mark_functions_to_output, cgraph_output_in_order,
        output_weakrefs, cgraph_materialize_all_clones,
        cgraph_optimize): Likewise.
        * lto-cgraph.c (merge_profile_summaries): Likewise.
        (input_cgraph): Likewise.
        * ipa-pure-const.c (generate_summary): Likewise.
        (propagate): Likwise.
        * ipa-utils.c (ipa_reduced_postorder): Likewise.
        (ipa_free_postorder_info): Likewise.
        (ipa_reverse_postorder): Likewise.
        * ipa-inline.c (ipa_inline): Likewise.
        * matrix-reorg.c (find_matrices_decl): Likewise.
        (matrix_reorg): Likewise.
        * tree-vectorizer.c (increase_alignment): Likewise.
        * ipa.c (cgraph_remove_unreachable_nodes): Likewise.
        (function_and_variable_visibility): Likewise.
        (whole_program_function_and_variable_visibility): Likewise.
        (ipa_cdtor_merge): Likewise.
        * trans-mem.c (ipa_tm_execute): Likewise.
        * ipa-inline-analysis.c (dump_inline_summaries): Likewise.
        * ipa-prop.c (ipa_print_all_jump_functions): Likewise.
        (ipa_print_all_params): Likewise.
        (ipa_update_after_lto_read): Likewise.
        * tree-profie.c (tree_profiling): Likewise.
        * tree-ssa-structalias.c (ipa_pta_execute): Likewise.
        * passes.c (dump_passes): Likewise.
        (do_per_function): Likewise.
        (ipa_write_summaries): Likewise.
        * varpool.c (dump_varpool): Likewise.
        (varpool_node_for_asm): Likewise.
        (varpool_assemble_pending_decls): Likewise.

2012-04-16  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52975
        * tree-if-conv.c (predicate_bbs): Do not simplify inverted
        condition but always mark it with TRUTH_NOT_EXPR.

2012-04-16  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52975
        * tree-ssa-forwprop.c (combine_cond_exprs): New function.
        (ssa_forward_propagate_and_combine): Call it for COND_EXPRs
        and VEC_COND_EXPRs.  Also combine into VEC_COND_EXPRs condition.
        * fold-const.c (operand_equal_p): Handle TARGET_MEM_REF.

2012-04-14  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/sse.md (ssse3_plusminus): New code iterator.
        (avx2_ph<plusminus_mnemonic>wv16hi3): Macroize insn from
        avx2_ph{add,adds,sub,subs}wv16hi3 using ssse3_plusminus code iterator.
        (ssse3_ph<plusminus_mnemonic>wv8hi3): Macroize insn from
        ssse3_ph{add,adds,sub,subs}wv8hi3 using ssse3_plusminus code iterator.
        (ssse3_ph<plusminus_mnemonic>wv4hi3): Macroize insn from
        ssse3_ph{add,adds,sub,subs}wv4hi3 using ssse3_plusminus code iterator.

        (avx2_ph<plusminus_mnemonic>dv8si3): Macroize insn from
        avx2_ph{add,adds,sub,subs}dv8si3 using plusminus code iterator.
        (ssse3_ph<plusminus_mnemonic>dv4si3): Macroize insn from
        ssse3_ph{add,adds,sub,subs}dv4si3 using plusminus code iterator.
        (ssse3_ph<plusminus_mnemonic>dv2si3): Macroize insn from
        ssse3_ph{add,adds,sub,subs}dv2si3 using plusminus code iterator.

        (xop_plus): New code iterator.
        (macs): New code attribute.
        (macds): Ditto.
        (xop_p<macs><ssemodesuffix><ssemodesuffix>): Macroize insn from
        xop_pmacs{,s}{ww,dd} using xop_plus code iterator and VI24_128 mode
        iterator.
        (xop_p<macs>dql): Macroize insn from xop_pmacs{,s}dql using
        xop_plus code iterator.
        (xop_p<macs>dqh): Macroize insn from xop_pmacs{,s}dqh using
        xop_plus code iterator.
        (xop_p<macs>wd): Macroize insn from xop_pmacs{,s}wd using
        xop_plus code iterator.
        (xop_p<madcs>wd): Macroize insn from xop_pmadcs{,s}wd using
        xop_plus code iterator.

        (xop_phadd<u>bw): Macroize insn from xop_phadd{,u}bw usign
        any_extend code iterator.
        (xop_phadd<u>bd): Macroize insn from xop_phadd{,u}bd usign
        any_extend code iterator.
        (xop_phadd<u>bq): Macroize insn from xop_phadd{,u}bq usign
        any_extend code iterator.
        (xop_phadd<u>wd): Macroize insn from xop_phadd{,u}wd usign
        any_extend code iterator.
        (xop_phadd<u>wq): Macroize insn from xop_phadd{,u}wq usign
        any_extend code iterator.
        (xop_phadd<u>dq): Macroize insn from xop_phadd{,u}dq usign
        any_extend code iterator.

2012-04-14  Tom de Vries  <tom@codesourcery.com>

        * cfgcleanup.c (try_optimize_cfg): Replace call to delete_insn_chain by
        call to delete_insn.  Remove code to reorder BASIC_BLOCK note and
        DELETED_LABEL note, and move it to ...
        * cfgrtl.c (delete_insn): ... here.  Change return type to void.
        (delete_insn_and_edges): Likewise.
        (delete_insn_chain): Handle new return type of delete_insn.  Delete
        chain backwards rather than forwards.
        * rtl.h (delete_insn, delete_insn_and_edges): Change return type to
        void.
        * cfglayout.c (fixup_reorder_chain): Delete unused label.

2012-04-14  Jan Hubicka  <jh@suse.cz>

        * cgraph.h: Update copyrights;
        (symtab_node): Turn to union typedef.
        (symtab_node_base): New structure.
        (symtab_type): Add SYMTAB_SYMBOL tag.
        (cgraph_node): Annotate some pinters with nested_ptr.
        (varpool_node): Likewise.
        (cgraph_local_info): Remove lto_file_data
        and externally_visible.
        (cgraph_node): Remove decl; same_comdat_group list;
        aux; ref_list; order; address_taken; reachable_from_other_parittion,
        in_other_partition; resolution.
        (varpool_node): Remove decl; same_comdat_group;
        ref_list; lto_file_data; aux; order; resolution; externally_visible;
        used_from_other_partition; in_other_partition.
        (symtab_node_def): New union.
        (cgraph, varpool): Update.
        (varpool_first_static_initializer, varpool_next_static_initializer,
        cgraph_only_called_directly_or_aliased_p,
        varpool_can_remove_if_no_refs, varpool_can_remove_if_no_refs,
        varpool_all_refs_explicit_p, cgraph_alias_aliased_node,
        varpool_alias_aliased_node, cgraph_edge_recursive_p): Update
        field references.
        * cgraph.c: Likewise.
        (cgraph_hash, assembler_name_hash): Turn into symtab_node.
        * cgraphbuild.c: Likewise.
        * lto-symtab.c: Likewise.
        * c-gimplify.c: Likewise.
        * value-prof.c: Likewise.
        * tree.c: Likewise.
        * ipa-cp.c: Likewise.
        * tree-emutls.c: Likewise.
        * ipa-inline-transform.c: Likwise.
        * ipa-reference.c: Likewise.
        * cgraphunit.c: Likewise.
        * ipa-ref.c: Likewise.
        * lto-cgraph.c: Likewise.
        * ipa-ref-inline.h: Likewise.
        * ipa-pure-const.c: Likewise.
        * lto-streamer-out.c: Likewise.
        * ipa-utils.c: Likewise.
        * ipa-inline.c: Likewise.
        * matrix-reorg.c: Likewise.
        * tree-eh.c: Likewise.
        * tree-vectorizer.c: Likewise.
        * ipa-split.c: Likewise.
        * ipa.c: Likewise.
        * trans-mem.c: Likewise.
        * ipa-inline-analysis.c: Likewise.
        * gimplify.c: Likewise.
        * cfgexpand.c: Likewise.
        * tree-sra.c: Likewise.
        * ipa-prop.c: Likewise.
        * varasm.c: Likewise.
        * tree-nested.c: Likewise.
        * tree-inline.c: Likewise.
        * tree-profile.c: Likewise.
        * tree-ssa-structalias.c: Likewise.
        * passes.c: Likewise.
        * varpool.c: Likewise.

2012-04-14  Tom de Vries  <tom@codesourcery.com>

        * tree-ssa-tail-merge.c (stmt_local_def): New function, factored out of
        same_succ_hash, with local_def inlined.  Use SINGLE_SSA_DEF_OPERAND.
        Use FOR_EACH_IMM_USE_FAST instead of FOR_EACH_IMM_USE_STMT.  Remove use
        of find_edge.
        (gsi_advance_fw_nondebug_nonlocal): New function.
        (local_def): Removed function.
        (same_succ_hash): Use stmt_local_def.
        (same_succ_equal): Use gsi_advance_fw_nondebug_nonlocal.
        (gsi_advance_bw_nondebug_nonlocal): Use stmt_local_def.

2012-04-13  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386-c.c (ix86_target_macros): Define _ILP32
        and __ILP32__ for x32.

2012-04-13  Martin Jambor  <mjambor@suse.cz>

        PR middle-end/52939
        * gimple-fold.c (gimple_get_virt_method_for_binfo): Bail out if
        fold_ctor_reference returns a zero constant.

2012-04-13  Enkovich Ilya  <ilya.enkovich@intel.com>

        * config.gcc: Add i386/gnu-user-common.h before all
        i386/gnu-user.h and i386/gnu-user64.h usages.

        * config/i386/gnu-user-common.h: New.

        * config/i386/gnu-user.h (CPP_SPEC): Moved to gnu-user-common.h.
        (CC1_SPEC): Likewise.
        (ENDFILE_SPEC): Likewise.
        (DEFAULT_PCC_STRUCT_RETURN): Likewise.
        (TARGET_TLS_DIRECT_SEG_REFS_DEFAULT): Likewise.
        (TARGET_OS_CPP_BUILTINS): Likewise.
        (LIBGCC2_HAS_TF_MODE): Likewise.
        (LIBGCC2_TF_CEXT): Likewise.
        (TF_SIZE): Likewise.
        (TARGET_ASM_FILE_END): Likewise.
        (STACK_CHECK_MOVING_SP): Likewise.
        (STACK_CHECK_STATIC_BUILTIN): Likewise.
        * config/i386/gnu-user64.h: Likewise.

2012-04-13  Martin Jambor  <mjambor@suse.cz>

        * expr.c (expand_expr_real_1): Pass type, not the expression, to
        set_mem_attributes for a memory temporary. Do not call the function
        for the memory temporary created for a bitfield.

2012-04-13  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/48866
        * df.h (enum debug_temp_where): New.
        (dead_debug_init, dead_debug_finish) Declare.
        (dead_debug_add, dead_debug_insert_temp): Declare.
        (struct dead_debug_use, struct dead_debug): Moved from...
        * df-problems.c: ... here.
        (df_set_unused_notes_for_mw): Bind debug uses of unused regno
        to a debug temp.
        (df_create_unused_note): Likewise.
        (df_set_dead_notes_for_mw): Move comment where it belongs.
        (dead_debug_init): Export.
        (dead_debug_reset_uses): New, factored out of...
        (dead_debug_finish): ...this.  Export.
        (dead_debug_reset): Remove.
        (dead_debug_add): Export.
        (dead_debug_insert_before): Rename to...
        (dead_debug_insert_temp): ... this.  Add where argument.  Export.
        Locate stored value for BEFORE_WITH_VALUE.  Avoid repeat inserts.
        Return insertion count.
        (df_note_bb_compute): Adjust.
        * dce.c (word_dce_process_block): Adjust dead debug uses.
        (dce_process_block): Likewise.

2012-04-13  Alexandre Oliva  <aoliva@redhat.com>

        * df-problems.c (df_note_bb_compute): Do not take note of
        debug uses for whose REGs we won't emit DEAD or UNUSED notes.

2012-04-13  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/51570
        * var-tracking.c (expand_depth): New type.
        (onepart_aux, expand_loc_callback_data): Change depth type to it.
        (loc_exp_dep_alloc): Adjust initializer.
        (update_depth): Use new type.  Add entryvals.
        (vt_expand_var_loc_chain): Take note of expansions with
        ENTRY_VALUEs, but don't accept them right away.  Run an optional
        second pass accepting the minimum ENTRY_VALUE count found in the
        first pass.
        (vt_expand_loc_callback, INIT_ELCD): Adjust.

2012-04-13  Tom de Vries  <tom@codesourcery.com>

        * tree-ssa-tail-merge.c (gsi_advance_bw_nondebug_nonlocal): Add
        parameters vuse and vuse_escaped.
        (find_duplicate): Init vuse1, vuse2 and vuse_escaped.  Pass to
        gsi_advance_bw_nondebug_nonlocal.  Return if vuse_escaped and
        vuse1 != vuse2.

2012-04-13  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52969
        * tree-if-conv.c (predicate_mem_writes): Properly gimplify
        the condition for the COND_EXPR and handle predicate negation
        by swapping the COND_EXPR arms.

2012-04-13  Nick Clifton  <nickc@redhat.com>

        * config/rl78/rl78.c (rl78_devirt_pass): Remove use of
        TODO_dump_func flag.

2012-04-13  Andrey Belevantsev  <abel@ispras.ru>

        PR rtl-optimization/52203
        PR rtl-optimization/52715

        Revert the 2012-03-07 fix for PR 52203.
        * sel-sched.c (reset_sched_cycles_in_current_ebb): Check that
        the insn does not modify DFA right before issuing, adjust
        issue_rate accordingly.

2012-04-13  Richard Guenther  <rguenther@suse.de>

        PR c/52549
        * c-typeck.c (pointer_diff): Remove bogus assert.

2012-04-13  Richard Guenther  <rguenther@suse.de>

        PR c/52862
        * convert.c (convert_to_pointer): Remove special-casing of zero.

2012-04-13  Joey Ye  <joey.ye@arm.com>

        * config/arm/constraints.md (Pe): New constraint.
        * config/arm/arm.md: New split for imm 256-510.

2012-04-13  Terry Guo  <terry.guo@arm.com>

        * config/arm/arm-cores.def: Added core cortex-m0plus.
        * config/arm/arm-tune.md: Regenerated.
        * config/arm/arm-tables.opt: Regenerated.
        * doc/invoke.texi: Added entry for cpu ARM cortex-m0plus.

2012-04-13  Alan Modra  <amodra@gmail.com>

        PR target/52828
        * config/rs6000/rs6000.c (rs6000_emit_stack_tie): Rewrite with
        tie regs on destination of sets.  Delete forward declaration.
        (rs6000_emit_stack_reset): Update rs6000_emit_stack_tie calls.
        (rs6000_emit_prologue): Likewise.
        (rs6000_emit_epilogue): Likewise.  Use in place of gen_frame_tie
        and gen_stack_tie.
        (is_mem_ref): Use tie_operand to recognise stack ties.
        * config/rs6000/predicates.md (tie_operand): New.
        * config/rs6000/rs6000.md (restore_stack_block): Generate new
        stack tie rtl.
        (restore_stack_nonlocal): Likewise.
        (stack_tie): Update.
        (frame_tie): Delete.

2012-04-12  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

        * tree-ssa-reassoc.c (attempt_builtin_powi_stats): Change %ld to
        HOST_WIDE_INT_PRINT_DEC in format strings.

2012-04-12  Uros Bizjak  <ubizjak@gmail.com>

        PR target/52932
        * config/i386/avx2intrin.h (_mm256_permutevar8x32_ps): Change second
        argument type to __m256i.  Update call to __builtin_ia32_permvarsf256.
        * config/i386/sse.md (UNSPEC_VPERMVAR): New.
        (UNSPEC_VPERMSI, UNSPEC_VPERMSF): Remove.
        (avx2_permvarv8sf, avx2_permvarv8si): Switch operands 1 and 2.
        (avx2_permvar<mode>): Macroize insn from avx2_permvarv8sf and
        avx2_permvarv8si using VI4F_256 mode iterator.
        * config/i386/i386.c (bdesc_args) <__builtin_ia32_permvarsf256>:
        Update builtin type to V8SF_FTYPE_V8SF_V8SI.
        (ix86_expand_vec_perm): Update calls to gen_avx2_permvarv8si and
        gen_avx2_permvarv8sf.
        (expand_vec_perm_pshufb): Ditto.

2012-04-12  Michael Meissner  <meissner@linux.vnet.ibm.com>

        PR target/52775
        * config/rs6000/rs6000.h (TARGET_FCFID): Add TARGET_PPC_GPOPT to
        the list of options to enable the FCFID instruction.
        (TARGET_EXTRA_BUILTINS): Adjust comment.

2012-04-12  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

        PR tree-optimization/18589
        * tree-ssa-reassoc.c (reassociate_stats): Add two fields.
        (operand_entry): Add count field.
        (add_repeat_to_ops_vec): New function.
        (completely_remove_stmt): Likewise.
        (remove_def_if_absorbed_call): Likewise.
        (remove_visited_stmt_chain): Remove feeding builtin pow/powi calls.
        (acceptable_pow_call): New function.
        (linearize_expr_tree): Look for builtin pow/powi calls and add operand
        entries with repeat counts when found.
        (repeat_factor_d): New struct and associated typedefs.
        (repeat_factor_vec): New static vector variable.
        (compare_repeat_factors): New function.
        (get_reassoc_pow_ssa_name): Likewise.
        (attempt_builtin_powi): Likewise.
        (reassociate_bb): Call attempt_builtin_powi.
        (fini_reassoc): Two new calls to statistics_counter_event.

2012-04-12  Richard Guenther  <rguenther@suse.de>

        * Makefile.in (cgraphunit.o): Add $(EXCEPT_H) dependency.
        * cgraph.h (tree_rest_of_compilation): Remove.
        * cgraph.c (cgraph_add_new_function): Move ...
        * cgraphunit.c (cgraph_add_new_function): ... here.
        (tree_rest_of_compilation): Make static.
        (cgraph_expand_function): Do not set cgraph_function_flags_ready.
        * tree-optimize.c (gate_all_optimizations, pass_all_optimizations,
        gate_all_early_local_passes, execute_all_early_local_passes,
        pass_early_local_passes, gate_all_early_optimizations,
        pass_all_early_optimizations): Move ...
        * passes.c (gate_all_optimizations, pass_all_optimizations,
        gate_all_early_local_passes, execute_all_early_local_passes,
        pass_early_local_passes, gate_all_early_optimizations,
        pass_all_early_optimizations): ... here.
        * tree-optimize.c (execute_free_datastructures): Remove.
        * tree-flow.h (execute_free_datastructures): Remove.
        * tree-optimize.c (execute_init_datastructures,
        pass_init_datastructures): Move ...
        * tree-ssa.c (execute_init_datastructures,
        pass_init_datastructures): ... here.
        * cfgexpand.c (gimple_expand_cfg): Inline-expand call to
        execute_free_datastructures.

2012-04-12  Bernd Schmidt  <bernds@codesourcery.com>

        * dbgcnt.def (ira_move): New counter.
        * ira-int.h (ira_create_new_reg): Declare function.
        (first_moveable_pseudo, last_moveable_pseudo): Declare variables.
        * ira-emit.c (ira_create_new_reg): Renamed from craete_new_reg and
        no longer static.  All callers changed.
        * ira.c: Include "dbgcnt.h".
        (rtx_moveable_p, insn_dominated_by_p, find_moveable_pseudos,
        move_unallocated_pseudos): New static functions.
        (first_moveable_pseudo, last_moveable_pseudo): New global variables.
        (pseudo_replaced_reg, pseudo_move_insn): New static variables.
        (ira): Call find_moveable_pseudos and move_unallocated_pseudos.
        * ira-costs.c (find_costs_and_classes): Assign a memory cost of zero
        to the pseudos generated in find_moveable_pseudos.
        * Makefile.in (ira.o): Add $(DBGCNT_H).

2012-04-12  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52943
        * tree-chrec.h (chrec_is_positive): Remove.
        * tree-scalar-evolution.c (chrec_is_positive): Move ...
        * tree-data-ref.c (chrec_is_positive): ... here.  Make static.
        Return false for a constant zero instead of negative.
        (analyze_siv_subscript_cst_affine): Handle zero difference
        in the initial condition explicitely.

2012-04-12  Richard Guenther  <rguenther@suse.de>

        * tree-parloops.c (parallelize_loops): Also consult the upper
        bound for the number of iterations.
        * tree-ssa-loop-prefetch.c (determine_loop_nest_reuse): Likewise.
        (loop_prefetch_arrays): Likewise.

2012-04-12  Richard Guenther  <rguenther@suse.de>

        * cfgloop.h (estimated_loop_iterations_int): Ditch
        'conservative' parameter.
        (max_stmt_executions_int): Likewise.
        (estimated_loop_iterations): Likewise.
        (max_stmt_executions): Likewise.
        (max_loop_iterations): Declare.
        (max_loop_iterations_int): Likewise.
        (estimated_stmt_executions): Likewise.
        (estimated_stmt_executions_int): Likewise.
        * tree-ssa-loop-niter.c (estimated_loop_iterations):
        Split parts to ...
        (max_loop_iterations): ... this.
        (estimated_loop_iterations_int): Split parts to ...
        (max_loop_iterations_int): ... this.
        (max_stmt_executions_int): Split parts to ...
        (estimated_stmt_executions_int): ... this.
        (max_stmt_executions): Split parts to ...
        (estimated_stmt_executions): ... this.
        * graphite-sese-to-poly.c (build_loop_iteration_domains): Adjust.
        * predict.c (predict_loops): Likewise.
        * tree-data-ref.c (max_stmt_executions_tree): Likewise.
        (analyze_siv_subscript_cst_affine): Likewise.
        (compute_overlap_steps_for_affine_1_2): Likewise.
        (analyze_subscript_affine_affine): Likewise.
        (init_omega_for_ddr_1): Likewise.
        * tree-parloops.c (parallelize_loops): Likewise.
        * tree-ssa-loop-ivopts.c (avg_loop_niter): Likewise.
        (may_eliminate_iv): Likewise.
        * tree-ssa-loop-prefetch.c (determine_loop_nest_reuse): Likewise.
        (loop_prefetch_arrays): Likewise.
        * tree-vrp.c (adjust_range_with_scev): Likewise.

2012-04-12  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.h (RETURN_ADDR_RTX): Use NULL_RTX instead of 0.
        * config/sh/sh.c (INSN_REGMODE_WEIGHT, CURR_REGMODE_PRESSURE):
        Fix line width.
        (dump_table): Use bool type for need_align and have_df variables.
        (find_barrier, sfunc_uses_reg): Use NULL_RTX instead of 0.
        (regs_used): Remove register modifier.
        (barrier_align): Move variables slot, credit, jump_to_next
        into if block above for loop.  Use bool type for jump_to_next.
        (sh_function_arg): Use NULL_RTX instead of 0.

2012-04-11  Andreas Schwab  <schwab@linux-m68k.org>

        * config/m68k/m68k.md (rotrhi3+1): Name it rotrhi_lowpart.
        (bswapsi2): New expander.

2012-04-11  H.J. Lu  <hongjiu.lu@intel.com>

        * config/host-linux.c (TRY_EMPTY_VM_SPACE): Defined to
        0x60000000 if __x86_64 is defined and __LP64__ isn't defined.

2012-04-11  H.J. Lu  <hongjiu.lu@intel.com>

        PR rtl-optimization/52876
        * emit-rtl.c (set_reg_attrs_from_value): Handle arbitrary value.
        Don't call mark_reg_pointer for incompatible pointer sign extension.

        * reginfo.c (reg_scan_mark_refs): Call set_reg_attrs_from_value
        directly.

2012-04-11  Bernd Schmidt  <bernds@codesourcery.com>

        * fold-const.c (fold_unary_loc): Use GET_MODE_PRECISION for
        comparisons against TYPE_PRECISION.
        * tree-ssa-forwprop.c (combine_conversions): Likewise.

2012-04-11  Xinliang David Li  <davidxl@google.com>

        * tree-passes.h: Remove TODO_dump_func.
        * tree-ssa-tail-merge.c (tail_merge_optimize): Remove TODO_dump_func.
        * trans-mem.c: Remove TODO_dump_func.
        * ira.c: Remove TODO_dump_func.

2012-04-11  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.c (ix86_option_override_internal): Check
        SUBTARGET_OVERRIDE_OPTIONS and SUBSUBTARGET_OVERRIDE_OPTIONS
        after TARGET_64BIT is updated.

2012-04-11  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.h: Remove old secondary reload code.

2012-04-11  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.c (SCHED_REORDER): Merge macro into ...
        (ready_reorder): ... this function.

2012-04-11  Bernd Schmidt  <bernds@codesourcery.com>

        * sel-sched.c (sel_global_init): Swap order of sched_rgn_init and
        sched_init calls.

        * haifa-sched.c (prune_ready_list): Rework handling of SCHED_GROUP_P
        insns so that no other insn is queued for a time before them.

        * config/c6x/c6x.md (load_got_gotoff): Set op_pattern attribute to
        unknown.

2012-04-11  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52621
        * tree-chrec.c (evolution_function_is_invariant_rec_p): Properly
        consider loop nesting.
        (evolution_function_is_univariate_p): Properly check the remainder
        for chrecs.

2012-04-11  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52918
        * except.c (sjlj_emit_dispatch_table): Properly update loop structure.

2012-04-11  Nick Clifton  <nickc@redhat.com>

        * config/rl78/rl78.c (rl78_expand_prologue): Set stack use
        information, if requested.

        * config/rx/rx.c (rx_expand_prologue): Likewise.

2012-04-11  Peter Bergner  <bergner@vnet.ibm.com>
            Michael Matz  <matz@suse.de>

        PR target/16458
        * rtlanal.c (unsigned_reg_p): New function.
        Update copyright notice dates.
        * rtl.h (unsigned_reg_p): Prototype it.
        Update copyright notice dates.
        * config/rs6000/rs6000.c (rs6000_generate_compare): Use it.
        Update comment.
        * expr.c (expand_expr_real_1): Set register attributes.
        * stmt.c (expand_case): Likewise.

2012-04-11  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/50751
        * config/sh/sh-protos.h (sh_legitimate_index_p): Add new arguments
        consider_sh2a and allow_zero.
        * config/sh/sh.c (sh_legitimate_index_p): Likewise.
        (disp_addr_displacement): New function.
        (sh_address_cost): Use disp_addr_displacement function instead
        of DISP_ADDR_OFFSET.
        (sh_legitimate_address_p): Adapt to changed
        sh_legitimate_index_p declaration.
        (sh_find_mov_disp_adjust): Remove HImode check.
        (sh_secondary_reload): Add HImode case.  Use satisfies_constraint_Sdd,
        disp_addr_displacement and max_mov_insn_displacement.
        (max_mov_insn_displacement): Remove HImode check.
        * config/sh/sh.h (CONST_OK_FOR_K04, CONST_OK_FOR_K12,
        DISP_ADDR_P, DISP_ADDR_OFFSET): Remove.
        * config/sh/constraints.md (K05, K13): New constraints.
        (K12): Correct comment.
        (Sdd): Do not use DISP_ADDR_P macro.
        (Snd, Sbw): Use satisfies_constraint_Sdd.
        * config/sh/sh.md (extendhisi2): Remove constraints from expander.
        (*extendhisi2_compact, movhi_i): Remove.
        (*extendhisi2_compact_reg, *extendhisi2_compact_mem_disp,
        *extendhisi2_compact_mem_disp, *extendhisi2_compact_snd,
        *movhi_reg_reg, *movhi_store_mem_disp05, *movhi_store_mem_disp13,
        *movhi_load_mem_disp, *movhi_load_mem_disp, *movhi): New insns.
        (*extendqisi2_compact_mem_disp, *extendqisi2_compact_mem_disp,
        *movqi_store_mem_disp04, *movqi_store_mem_disp12, *movqi_load_mem_disp,
        *movqi_load_mem_disp): Use sh_legitimate_index_p instead of
        CONST_OK_FOR_Kxx.
        Add new peepholes for HImode displacement addressing.

2012-04-11  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.h (SIDI_OFF): Remove.
        * config/sh/sh.md: Use gen_highpart and gen_lowpart to access
        DImode subregs instead of gen_rtx_REG or simplifly_gen_subreg
        or operand_subword.

2012-04-11  Eric Botcazou  <ebotcazou@adacore.com>

        PR target/52624
        * doc/extend.texi (Other Builtins): Document __builtin_bswap16.
        (PowerPC AltiVec/VSX Built-in Functions): Remove it.
        * doc/md.texi (Standard Names): Add bswap.
        * builtin-types.def (BT_UINT16): New primitive type.
        (BT_FN_UINT16_UINT16): New function type.
        * builtins.def (BUILT_IN_BSWAP16): New.
        * builtins.c (expand_builtin_bswap): Add TARGET_MODE argument.
        (expand_builtin) <BUILT_IN_BSWAP16>: New case.  Pass TARGET_MODE to
        expand_builtin_bswap.
        (fold_builtin_bswap): Add BUILT_IN_BSWAP16 case.
        (fold_builtin_1): Likewise.
        (is_inexpensive_builtin): Likewise.
        * optabs.c (expand_unop): Deal with bswap in HImode specially.  Add
        missing bits for bswap to libcall code.
        * tree.c (build_common_tree_nodes): Build uint16_type_node.
        * tree.h (enum tree_index): Add TI_UINT16_TYPE.
        (uint16_type_node): New define.
        * config/rs6000/rs6000-builtin.def (RS6000_BUILTIN_BSWAP_HI): Delete.
        * config/rs6000/rs6000.c (rs6000_expand_builtin): Remove handling of
        above builtin.
        (rs6000_init_builtins): Likewise.
        * config/rs6000/rs6000.md (bswaphi2): Add TARGET_POWERPC predicate.

2012-04-11  Tristan Gingold  <gingold@adacore.com>

        * doc/extend.texi (Type Attributes): Move paragraph.

2012-04-11  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR 24985
        * diagnostic.h (show_caret): Declare.
        (caret_max_width): Declare.
        (diagnostic_show_locus): Declare.
        * diagnostic.c (diagnostic_initialize): Initialize to false.
        (diagnostic_show_locus): New.
        (diagnostic_report_diagnostic): Call it.
        (getenv_columns): New.
        (adjust_line): New.
        (diagnostic_set_caret_max_width): New.
        * input.c (read_line): New.
        (location_get_source_line): New.
        * input.h (location_get_source_line): Declare.
        * toplev.c (general_init): Initialize show_caret from options.
        * dwarf2out.c (gen_producer_string): Handle fdiagnostics-show-caret.
        * opts.c (common_handle_option): Likewise.
        * pretty-print.h (pp_get_prefix): New.
        (pp_base_get_prefix): New.
        * common.opt (fdiagnostics-show-caret): New option.
        * doc/invoke.texi (fdiagnostics-show-caret): Document it.

2012-04-11  Richard Guenther  <rguenther@suse.de>

        PR rtl-optimization/52881
        * ifcvt.c (find_if_case_2): Avoid speculating loop latches.

2012-04-11  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52912
        * tree-ssa-threadupdate.c (thread_block): Tell the cfg
        manipulation code we are threading through a loop header
        to an exit destination.

2012-04-10  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        * tree.h (warn_if_unused_value): Move declaration from here.
        * stmt.c (warn_if_unused_value): Move definition from here.

2012-04-10  Michael Matz  <matz@suse.de>

        * tree-vectorizer.h (_loop_vec_info.strided_stores): Rename to
        grouped_stores.
        (LOOP_VINFO_STRIDED_STORES): Rename to LOOP_VINFO_GROUPED_STORES.
        (struce _bb_vec_info.strided_stores): Rename to grouped_stores.
        (BB_VINFO_STRIDED_STORES): Rename to BB_VINFO_GROUPED_STORES.
        (STMT_VINFO_STRIDED_ACCESS): Rename to STMT_VINFO_GROUPED_ACCESS.
        (vect_strided_store_supported): Rename to vect_grouped_store_supported.
        (vect_strided_load_supported): Rename to vect_grouped_load_supported.
        (vect_transform_strided_load): Rename to vect_transform_grouped_load.
        (vect_record_strided_load_vectors): Rename to
        vect_record_grouped_load_vectors.
        * tree-vect-data-refs.c (vect_update_misalignment_for_peel):
        Rename use of above macros.
        (vect_verify_datarefs_alignment): Ditto.
        (vector_alignment_reachable_p): Ditto.
        (vect_peeling_hash_get_lowest_cost): Ditto.
        (vect_enhance_data_refs_alignment): Ditto.
        (vect_analyze_group_access): Ditto and rename stride to groupsize.
        (vect_analyze_data_ref_access): Rename "strided" to "grouped".
        (vect_strided_store_supported): Rename to vect_grouped_store_supported.
        (vect_strided_load_supported): Rename to vect_grouped_load_supported.
        (vect_transform_strided_load): Rename to vect_transform_grouped_load.
        (vect_record_strided_load_vectors): Rename to
        vect_record_grouped_load_vectors.
        * tree-vect-loop.c (new_loop_vec_info): Rename use of above macros.
        (destroy_loop_vec_info): Ditto.
        (vect_transform_loop): Ditto and rename strided_store to grouped_store.
        * tree-vect-slp.c (vect_build_slp_tree): Rename use of above macros.
        (vect_analyze_slp): Ditto.
        (new_bb_vec_info): Ditto.
        (destroy_bb_vec_info): Ditto.
        (vect_schedule_slp_instance): Ditto and rename strided_store to
        grouped_store.
        * tree-vect-stmts.c (vect_cost_strided_group_size): Rename to
        vect_cost_group_size.
        (vect_model_store_cost): Rename use of above macros and call
        to vect_cost_strided_group_size.
        (vect_model_load_cost): Ditto.
        (vectorizable_store): Ditto, rename strided_store to grouped_store
        and calls to renamed tree-vectorizer.h functions.
        (vectorizable_load): Ditto.
        (vect_transform_stmt): Rename use of above macros and strided_store
        to grouped_store.

2012-04-10  Jan Hubicka  <jh@suse.cz>

        * cgraph.h: Remove misledaing comment on ipa-ref.h.
        (symtab_type): New enum.
        (symtab_node): New structure.
        (cgraph_node, varpool_node): Add symbol base type.
        (cgraph, varpool): New accestor functions.
        * cgraph.c (cgraph_create_node_1): Set symbol type.
        * varpool.c (varpool_node): Set symbol type.

2012-04-10  Ulrich Weigand  <ulrich.weigand@linaro.org>
            Richard Sandiford  <rdsandiford@googlemail.com>

        * fwprop.c (propagate_rtx): Also set PR_CAN_APPEAR for subregs.

2012-04-10  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52888
        * gimple-low.c (gimple_check_call_args): Properly account for
        compatible aggregate types.

2012-04-10  Richard Guenther  <rguenther@suse.de>

        * toplev.h (tree_rest_of_compilation): Remove.
        * tree-optimize.c (tree_rest_of_compilation): Likewise.
        * cgraph.h (tree_rest_of_compilation): Declare.
        * tree-optimize.c (tree_rest_of_compilation): Move ...
        * cgraphunit.c (tree_rest_of_compilation): ... here.
        * cgraph.c (cgraph_add_new_function): Adjust.
        * Makefile.in (tree-optimize.o): Adjust.
        (cgraphunit.o): Likewise.

2012-04-10  Ulrich Weigand  <ulrich.weigand@linaro.org>

        PR tree-optimization/52870
        * tree-vect-patterns.c (vect_recog_widen_mult_pattern): Verify that
        presumed pattern statement is within the same loop or basic block.

2012-04-10  Tristan Gingold  <gingold@adacore.com>

        * gengtype.c (main): Make uintptr_t a known type.

2012-04-10  Richard Guenther  <rguenther@suse.de>

        * tree-pass.h (tree_lowering_passes): Remove.
        * tree-optimize.c (tree_lowering_passes): Remove.
        * cgraph.c (cgraph_add_new_function): Inline relevant parts
        of tree_lowering_passes, avoid redundant call of early local passes.
        * cgraphunit.c (cgraph_lower_function): Fold into ...
        (cgraph_analyze_function): ... its single caller.  Inline
        relevant parts of tree_lowering_passes.

2012-04-09  H.J. Lu  <hongjiu.lu@intel.com>

        PR other/52777
        * config/pa/pa.opt: Remove SIO and GNU_LD.

2012-04-09  Jan Hubicka  <jh@suse.cz>

        PR lto/52722
        PR lto/51765
        PR lto/52634
        * lto-cgraph.c (compute_ltrans_boundary): When alias is in the
        boundary, add its target too.
        * lto.c (add_references_to_partition): Add also aliased nodes.
        (add_cgraph_node_to_partition,
        add_varpool_node_to_partition): Work on nodes, not functions/variables;
        when adding alias, add also the aliased object.

2012-04-09  Uros Bizjak  <ubizjak@gmail.com>

        PR target/52883
        * config/i386/predicates.md (x86_64_zext_general_operand): Prevent
        VOIDmode immediate operands.
        * config/i386/constraints.md (Wz): New constraint.
        * config/i386/i386.md (*zero_extendsidi2_rex64): Use Wz instead of Z.

2012-04-09  Eric Botcazou  <ebotcazou@adacore.com>

        PR target/52717
        * config/sparc/sparc.c (sparc_file_end): Set TREE_PUBLIC explicitly on
        the DECL generated for the special GOT helper.

2012-04-09  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/constraints.md: Update list of constraints in
        comment block.
        (Sr0): Remove unused memory constraint.

2012-04-08  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        * tree-pretty-print.h: Update comment.

2012-04-08  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.md: Use braced string notation where applicable.
        (*prefetch_i4, prefetch_m2a): Merge into ...
        (*prefetch): ... this new insn.

2012-04-07  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.h (high_life_started): Remove
        * config/sh/predicates.md (general_movdst_operand): Use
        'reload_in_progress' instead of 'high_life_started'.
        * config/sh/sh.md (divsi_inv_call, *divsi_inv_call_combine,
        divsi_inv_fp): Likewise.

2012-04-07  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh-protos.h (prepare_move_operands): Return void
        instead of int.
        * config/sh/sh.c (prepare_move_operands): Likewise.
        * config/sh/sh.md: Remove return value checks of prepare_move_operands.

2012-04-07  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh-protos.h (fp_int_operand, symbol_ref_operand,
        general_movsrc_operand, general_movdst_operand, arith_reg_operand,
        fp_arith_reg_operand, arith_operand, arith_reg_or_0_operand,
        logical_operand, fpscr_operand, fpul_operand, expand_fp_branch,
        commutative_float_operator, noncommutative_float_operator,
        sh_handle_pragma): Remove.

2012-04-06  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/invoke.texi:  Clean up Texinfo markup throughout the file.
        Use @option markup on command-line options.  Use @samp markup on
        literal keywords to options.  Use @code markup on code fragments.
        Use other markup in preference to quotation marks in the text.
        Add markup to some passages without any.

2012-04-06  Mike Stump  <mikestump@comcast.net>

        * gimple-fold.c (gimple_fold_stmt_to_constant_1): Avoid warning.

2012-04-06  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.c (hi_const): Remove.
        (find_barrier, sh_reorg): Use satisfies_constraint_I16 instead
        of hi_const.

2012-04-06  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh-protos.h (sh_expand_t_scc): Change return type from int
        to bool.
        * config/sh/sh.c (sh_expand_t_scc): Likewise.
        * config/sh/sh.md (cstoresi4, cstoredi4): Remove GET_CODE checks before
        calling sh_expand_t_scc.

2012-04-06  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh-protos.h (fp_zero_operand, fp_one_operand,
        nonpic_symbol_mentioned_p, expand_block_move, expand_ashiftrt,
        sh_dynamicalize_shift_p, gen_shl_and, gen_shl_sext, system_reg_operand,
        reg_unused_after, sh_can_redirect_branch, sh_need_epilogue, fldi_ok,
        sh_hard_regno_rename_ok, sh_cfun_interrupt_handler_p,
        sh_cfun_resbank_handler_p, sh_attr_renesas_p, sh_cfun_attr_renesas_p,
        check_use_sfunc_addr, sh_contains_memref_p, sh_loads_bankedreg_p,
        sh2a_is_function_vector_call): Use bool as return type.
        (sh_pass_in_reg_p): Remove.
        * config/sh/sh.c (broken_move, mova_p, noncall_uses_reg, high_pressure,
        flow_dependent_p, sh2a_function_vector_p, expand_block_move,
        expand_ashiftrt, sh_dynamicalize_shift_p, gen_shl_and, gen_shl_sext,
        sh_need_epilogue, sh2a_is_function_vector_call, sh_attr_renesas_p,
        sh_cfun_attr_renesas_p, sh_cfun_interrupt_handler_p,
        sh_cfun_resbank_handler_p, system_reg_operand, fp_zero_operand,
        fp_one_operand, fldi_ok, reg_unused_after, sh_can_redirect_branch,
        sh_hard_regno_rename_ok, check_use_sfunc_addr, sh_contains_memref_p,
        sh_loads_bankedreg_p): Use bool as return type.
        (nonpic_symbol_mentioned_p): Use bool as return type.  Remove
        'register' modifier.

2012-04-06  Matt Turner  <mattst88@gmail.com>

        * doc/install.texi: Correct typo "-mno-lsc" -> "-mno-llsc".

2012-04-06  Eric Botcazou  <ebotcazou@adacore.com>

        * config/ia64/ia64.c (ia64_load_pair_ok): Return 0 if the second member
        of the destination isn't also a FP_REGS register.

2012-04-05  Teresa Johnson  <tejohnson@google.com>
            H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.h (ix86_tune_indices): Add X86_TUNE_LCP_STALL.
        * config/i386/i386.md (move immediate to memory peephole2):
        Add cases for HImode move when LCP stall avoidance is needed.
        * config/i386/i386.c (initial_ix86_tune_features): Initialize
        X86_TUNE_LCP_STALL entry.

2012-04-05  Uros Bizjak  <ubizjak@gmail.com>

        PR target/52882
        * config/i386/i386.c (ix86_decompose_address): Allow VOIDmode
        CONST_INT operands, zero-extended with AND.

2012-04-05  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/50751
        * config/sh/sh.c (sh_find_mov_disp_adjust): Take machine_mode as the
        first argument instead of mode size.  Move displacement calculations
        to ...
        (mov_insn_size, max_mov_insn_displacement, mov_insn_alignment_mask):
        ... these new functions.
        (disp_adjust): Remove max_mov_disp field.
        (sh_legitimate_index_p): Use max_mov_insn_displacement and
        mov_insn_alignment_mask.
        (sh_address_cost): Use max_mov_insn_displacement.

2012-04-05  Andrew Stubbs  <ams@codesourcery.com>

        * config/arm/arm.md (arch): Add neon_onlya8 and neon_nota8.
        (arch_enabled): Handle new arch types.
        (one_cmpldi2): Add NEON support.

2012-04-05  Richard Guenther  <rguenther@suse.de>

        * gimple.c (walk_gimple_op): Compute val_only for the LHS
        of an assigment in the canonical way, avoiding is_gimple_mem_rhs.
        (is_gimple_mem_rhs, is_gimple_reg_rhs, is_gimple_stmt): Move ...
        * gimplify.c (is_gimple_mem_rhs, is_gimple_reg_rhs, is_gimple_stmt):
        ... here and make static.
        * gimple.h (is_gimple_mem_rhs, is_gimple_reg_rhs, is_gimple_stmt):
        Remove.

2012-04-05  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-dse.c (dse_optimize_stmt): Remember the stmt
        basic-block before removing it.

2012-04-05  Richard Guenther  <rguenther@suse.de>

        * tree-ssanames.c (release_dead_ssa_names): Compact the SSA
        version namespace as we release the freelist.

2012-04-05  Richard Guenther  <rguenther@suse.de>

        * tree-nrv.c (tree_nrv): Release VDEFs.
        * tree-sra.c (sra_modify_constructor_assign): Likewise.
        (sra_modify_assign): Likewise.
        * tree-vect-stmts.c (vect_remove_stores): Likewise.
        * tree-vect-loop.c (vect_transform_loop): Likewise.
        * tree-ssa-dom.c (optimize_stmt): Likewise.
        * tree-vect-slp.c (vect_schedule_slp): Likewise.
        * tree-ssa-math-opts.c (execute_cse_sincos): Likewise.

2012-04-05  Richard Guenther  <rguenther@suse.de>

        * gimple-iterator.c (gsi_remove): Return whether EH edges need to be
        cleanup.
        * gimple.h (gsi_remove): Adjust.
        * tree-ssa-operands.c (unlink_stmt_vdef): Optimize.
        * tree-ssa-dom.c (optimize_stmt): Use gsi_remove result.
        * tree-ssa-dse.c (dse_optimize_stmt): Likewise.
        * tree-ssa-forwprop.c (remove_prop_source_from_use): Likewise.
        * tree-ssa-math-opts.c (execute_optimize_widening_mul): Likewise.
        * tree-ssa-pre.c (eliminate): Likewise.

2012-04-04  Mike Stump  <mikestump@comcast.net>

        * doc/rtl.texi (const_double): Document as sign-extending.
        * expmed.c (expand_mult): Ensure we don't use shift incorrectly.
        * emit-rtl.c (immed_double_int_const): Refine to state the
        value is signed.
        * simplify-rtx.c (mode_signbit_p): Add a fixme for wider than
        CONST_DOUBLE integers.
        (simplify_const_unary_operation, UNSIGNED_FLOAT): Ensure no
        negative values are converted.  Fix conversions bigger than
        HOST_BITS_PER_WIDE_INT.
        (simplify_binary_operation_1): Ensure we don't use shift incorrectly.
        (simplify_immed_subreg): Sign-extend CONST_DOUBLEs.
        * explow.c (plus_constant_mode): Add.
        (plus_constant): Implement with plus_constant_mode.
        * rtl.h (plus_constant_mode): Add.

2012-04-04  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52808
        * tracer.c (tail_duplicate): Do not tail-duplicate loop header blocks.
        * Makefile.in (tracer.o): Depend on $(CFGLOOP_H).

2012-04-04  Tristan Gingold  <gingold@adacore.com>

        * expr.c (expand_expr_real_2): Handle larger sizetype in
        POINTER_PLUS_EXPR.

2012-04-03  Kaz Kojima  <kkojima@gcc.gnu.org>

        * config/sh/t-sh (MULTILIB_MATCHES): Match m2a-single-only
        to m2a-single instead of m2e.

2012-04-03  Eric Botcazou  <ebotcazou@adacore.com>

        * expr.c (get_bit_range): Add OFFSET parameter and adjust BITPOS.
        Change type of BITOFFSET to signed.  Make sure the lower bound of
        the computed range is non-negative by adjusting OFFSET and BITPOS.
        (expand_assignment): Adjust call to get_bit_range.

2012-04-03  Sandeep Kumar Singh  <Sandeep.Singh2@kpitcummins.com>

        * h8300/h8300.c (h8300_current_function_monitor_function_p):
        New function. Added to check monitor functions.
        (h8300_option_override): Modified to generate error/warning
        messages for invalid combinations of different command line
        options.
        * h8300/h8300.md: Generate 'rte' for monitor functions. Do not
        save EXR on stack for monitor function in case of H8S target
        when "-mno-exr" is passed.
        * h8300/h8300-protos.h (h8300_current_function_monitor_function_p):
        Add prototype.
        * doc/invoke.texi: Document H8S options.

2012-04-03  Tristan Gingold  <gingold@adacore.com>

        * configure.ac: Use GCC_AC_FUNC_MMAP_BLACKLIST instead
        of gcc_AC_FUNC_MMAP_BLACKLIST.
        * acinclude.m4 (gcc_AC_FUNC_MMAP_BLACKLIST): Remove.
        * Makefile.in (aclocal_deps): Add mmap.m4.
        * configure: Regenerate.
        * aclocal.m4: Regenerate.

2012-04-03  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52808
        * tracer.c (tail_duplicate): Return whether we have duplicated
        any block.
        (tracer): If we have duplicated any block, cleanup the CFG.
        * cfghooks.c (duplicate_block): If we duplicated a loop
        header but not its loop, destroy the loop because it now has
        multiple entries.
        * tree-ssa-threadupdate.c (thread_through_loop_header): Tell
        the cfg manipulation routines we are not creating a multiple
        entry loop.

2012-04-03  Tristan Gingold  <gingold@adacore.com>

        * config/vms/vms-c.c (vms_pragma_nomember_alignment): Handle
        'byte' alignment.
        (vms_c_common_override_options): Allow parameterless variadic
        functions.

2012-04-03  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/52835
        * tree-data-ref.c (build_rdg): Return NULL if
        compute_data_dependences_for_loop failed.

2012-04-03  Eric Botcazou  <ebotcazou@adacore.com>

        * varasm.c (initializer_constant_valid_for_bitfield_p): Return true
        for REAL_CST as well.
        (output_constructor): Use RECORD_OR_UNION_TYPE_P predicate.
        In the bitfield case, if the value is a REAL_CST, convert it first to
        an INTEGER_CST.

2012-04-02  H.J. Lu  <hongjiu.lu@intel.com>

        * config.gcc: Use i386/biarchx32.h instead of i386/biarch64.h
        for --with-abi={x32|mx32} or --with-multilib-list=mx32.
        (supported_defaults): Add abi for i[34567]86-*-* and x86_64-*-*.

        * config/i386/biarchx32.h: New.

2012-04-02  Anatoly Sokolov  <aesok@post.ru>

        * config/arm/arm.h (PREFERRED_RELOAD_CLASS): Remove.
        * config/arm/arm.c (TARGET_PREFERRED_RELOAD_CLASS): Define.
        (arm_preferred_reload_class): New function.

2012-04-02  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52756
        * tree-ssa-threadupdate.c (def_split_header_continue_p): New function.
        (thread_through_loop_header): After threading through the loop latch
        remove the split part from the loop and clear further threading
        opportunities that would create a multiple entry loop.

2012-04-02  Richard Guenther  <rguenther@suse.de>

        PR rtl-optimization/52800
        * cprop.c (execute_rtl_cprop): Call cleanup_cfg with
        CLEANUP_CFG_CHANGED.

2012-04-02  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52803
        * loop-init.c (gate_handle_loop2): Destroy loops here if
        we don't enter RTL loop optimizers.

2012-04-02  Uros Bizjak  <ubizjak@gmail.com>

        Partially revert:
        2012-03-29  Richard Guenther  <rguenther@suse.de>

        * rtl.h (extended_count): Remove.
        * combine.c (extended_count): Remove.

2012-04-02  Dodji Seketeli  <dodji@redhat.com>

        PR c++/40942
        * pt.c (more_specialized_fn):  Don't apply decay conversion to
        types of function parameters.

2012-04-02  Tristan Gingold  <gingold@adacore.com>

        * ggc-page.c (PAGE_L1_SIZE, PAGE_L2_SIZE, LOOKUP_L1, LOOKUP_L2)
        (ggc_allocated_p, lookup_page_table_entry, set_page_table_entry)
        (alloc_page, init_ggc, clear_marks, struct ggc_pch_data)
        (ggc_pch_this_base): Use uintptr_t instead of size_t.

2012-03-31  H.J. Lu  <hongjiu.lu@intel.com>

        PR bootstrap/52784
        * config/i386/i386.c (ix86_option_override_internal): Don't
        check TARGET_64BIT if TARGET_64BIT_DEFAULT is false.

2012-03-31  Eric Botcazou  <ebotcazou@adacore.com>

        * tree-cfg.c (call_can_make_abnormal_goto): New predicate.
        (stmt_can_make_abnormal_goto): Use it.
        (is_ctrl_altering_stmt): Likewise.

2012-03-30  Naveen H.S  <naveen.S@kpitcummins.com>
            Kaz Kojima  <kkojima@gcc.gnu.org>

        * config/sh/sh.c (push_regs): Skip banked registers when
        resbank attribute is specified.
        (sh_expand_epilogue): Likewise.

2012-03-30  Richard Henderson  <rth@redhat.com>

        PR debug/52727
        * combine-stack-adj.c (prev_active_insn_bb): New.
        (next_active_insn_bb): New.
        (force_move_args_size_note): New.
        (combine_stack_adjustments_for_block): Use it.

2012-03-30  Richard Henderson  <rth@redhat.com>

        * config/i386/i386.c (struct expand_vec_perm_d): Add one_operand_p.
        (ix86_expand_vector_init_duplicate): Initialize it.
        (expand_vec_perm_palignr): Likewise.
        (ix86_expand_vec_perm_const): Likewise.
        (ix86_vectorize_vec_perm_const_ok): Likewise.
        (expand_vec_perm_blend): Use it.
        (expand_vec_perm_vpermil): Likewise.
        (expand_vec_perm_pshufb): Likewise.
        (expand_vec_perm_1): Likewise.
        (expand_vec_perm_pshuflw_pshufhw): Likewise.
        (expand_vec_perm_interleave2): Likewise.
        (expand_vec_perm_vpermq_perm_1): Likewise.
        (expand_vec_perm_vperm2f128): Likewise.
        (expand_vec_perm_interleave3): Likewise.
        (expand_vec_perm_vperm2f128_vblend): Likewise.
        (expand_vec_perm_vpshufb2_vpermq): Likewise.
        (expand_vec_perm_vpshufb2_vpermq_even_odd): Likewise,.
        (expand_vec_perm_broadcast): Likewise.
        (expand_vec_perm_vpshufb4_vpermq2): Likewise.

2012-03-30  Richard Henderson  <rth@redhat.com>

        * dwarf2out.c (gen_variable_die): Initialize off.

2012-03-30  Tristan Gingold  <gingold@adacore.com>

        * config/vms/vms-f.c: New file.
        * config/vms/t-vms (vms-f.o): New rule.
        * config.gcc (*-*-*vms*): Define fortran_target_objs.

2012-03-30  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52754
        * tree-ssa-forwprop.c (forward_propagate_addr_expr_1): Only
        propagate arbitrary addresses into really plain dereferences.

2012-03-30  Richard Guenther <rguenther@suse.de>

        PR middle-end/52772
        * except.c (emit_to_new_bb_before): Move loop updating ...
        (dw2_build_landing_pads): ... here.  Use a proper block for
        querying the loop father.

2012-03-30  Tristan Gingold  <gingold@adacore.com>

        * config/ia64/ia64.c (ia64_section_type_flags): Remove
        common_object attribute handling.
        (SECTION_VMS_OVERLAY): Remove
        (ia64_vms_common_object_attribute): Replace abort with an assert.
        Do not set DECL_SECTION_NAME.
        (ia64_vms_output_aligned_decl_common): Handle common_object
        attribute.
        (ia64_vms_elf_asm_named_section): Remove.
        * config/ia64/vms.h (TARGET_ASM_NAMED_SECTION): Remove.

2012-03-30  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52786
        * double-int.c (rshift_double): Remove not needed cast.

2012-03-30  Richard Guenther  <rguenther@suse.de>

        * tree-affine.h (print_aff): Remove.
        * tree-affine.c (print_aff): Make static.
        * tree-data-ref.h (access_matrix_get_index_for_parameter): Remove.
        (get_references_in_stmt): Likewise.
        (print_direction_vector): Likewise.
        (print_dir_vectors): Likewise.
        (print_dist_vectors): Likewise.
        (dump_subscript): Likewise.
        (dump_ddrs): Likewise.
        (dump_dist_dir_vectors): Likewise.
        (dump_data_references): Likewise.
        (dump_data_dependence_relation): Likewise.
        (dump_data_dependence_direction): Likewise.
        (dump_rdg_vertex): Likewise.
        (dump_rdg_component): Likewise.
        (debug_ddrs): Declare.
        (struct data_ref_loc_d): Move ...
        * tree-data-ref.c (struct data_ref_loc_d): ... here.
        (get_references_in_stmt): Make static.
        (dump_data_references): Likewise.
        (dump_subscript): Likewise.
        (print_direction_vector): Likewise.
        (print_dir_vectors): Likewise.
        (print_dist_vectors): Likewise.
        (dump_data_dependence_relation): Likewise.
        (dump_dist_dir_vectors): Likewise.
        (dump_ddrs): Likewise.
        (dump_rdg_vertex): Likewise.
        (dump_rdg_component): Likewise.
        (debug_ddrs): New function.
        (access_matrix_get_index_for_parameter): Remove.

2012-03-30  Tristan Gingold  <gingold@adacore.com>

        * config/vms/vms.c (VMS_CRTL_FLOAT32): Rename.
        (VMS_CRTL_FLOAT64, VMS_CRTL_FLOAT64_VAXD): New.
        (VMS_CRTL_FLOAT128, VMS_CRTL_DPML, VMS_CRTL_NODMPL)
        (VMS_CRTL_32ONLY, VMS_CRTL_G_MASK, VMS_CRTL_G_NONE)
        (VMS_CRTL_GA, VMS_CRTL_GL, VMS_CRTL_FLOATV2): New.
        (vms_patch_builtins): Handle new flags
        * config/vms/vms-crtlmap.map: Completed using nm on
        c and math system libraries.
        * config/vms/make-crtlmap.awk: Handle any number of flags.

2012-03-30  Martin Jambor  <mjambor@suse.cz>

        * tree-ssa-ccp.c (insert_clobbers_for_var): Do not assert that there
        is a builtin_stack_save in a dominating BB.

2012-03-29  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/sse.md (avx_h<plusminus_insn>v4df3): Fix results
        crossing 128bit lane boundary.

2012-03-29  Vladimir Makarov  <vmakarov@redhat.com>

        * ira-color.c (setup_left_conflict_sizes_p): Process all
        conflicting objects.

2012-03-29  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/52760
        * tree-vect-slp.c (vect_get_constant_vectors): Convert constant_p
        shift count for {L,R}{SHIFT,ROTATE}_EXPR to TREE_TYPE (vector_type).

2012-03-29  Richard Guenther  <rguenther@suse.de>

        * cgraph.h (cgraph_materialize_all_clones): Remove.
        (reset_inline_failed): Likewise.
        * cgraphunit.c (cgraph_materialize_all_clones): Make static.
        * cgraphbuild.c (reset_inline_failed): Remove.
        * rtl.h (cse_main): Remove.
        (extended_count): Likewise.
        * cse.c (dump_class): Mark as DEBUG_FUNCTION.
        (cse_main): Make static.
        * combine.c (extended_count): Remove.
        (dump_combine_stats): Mark as DEBUG_FUNCTION.
        * basic-block.h (reorder_basic_blocks): Remove.
        * bb-reorder.c (reorder_basic_blocks): Make static.
        * Makefile.in (dse.o): Remove dse.h dependency.
        * dse.h: Remove.
        * dse.c (gate_dse): Remove.
        (clear_alias_mode_eq): Likewise.
        (clear_alias_mode_hash): Likewise.
        (dse_record_singleton_alias_set): Likewise.
        (dse_invalidate_singleton_alias_set): Likewise.

2012-03-29  H.J. Lu  <hongjiu.lu@intel.com>

        * config/linux-android.h (ANDROID_STARTFILE_SPEC): Use
        crtbegin_so%O%s for -shared.
        (ANDROID_ENDFILE_SPEC): Use crtend_so%O%s for -shared.

2012-03-29  Richard Guenther  <rguenther@suse.de>

        * tree-flow.h (struct pre_expr_d): Remove forward declaration.
        (add_to_value): Remove.
        (print_value_expressions): Likewise.
        * tree-ssa-pre.c (add_to_value): Make static.
        (print_value_expressions): Likewise.
        * gimple.h (gimple_adjust_this_by_delta): Remove.
        * gimple-fold.c (gimple_adjust_this_by_delta): Likewise.

2012-03-29  Richard Guenther  <rguenther@suse.de>

        PR middle-end/50708
        * double-int.h (rshift_double): Remove.
        * double-int.c (lshift_double): Use absu_hwi to make count positive.
        (rshift_double): Make static, take unsigned count argument,
        remove handling of negative count argument.
        (double_int_rshift): Dispatch to lshift_double.

2012-03-28  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/biarch64.h (TARGET_64BIT_DEFAULT): Add
        OPTION_MASK_ABI_64.

        * config/i386/gnu-user64.h (SPEC_64): Support TARGET_BI_ARCH == 2.
        (SPEC_X32): Likewise.
        (MULTILIB_DEFAULTS): Likewise.

        * config/i386/i386.c (isa_opts): Remove -m64.
        (ix86_target_string): Properly handle -m32/-m64/-mx32.
        (ix86_option_override_internal): Properly
        set OPTION_MASK_ISA_64BIT and OPTION_MASK_ISA_X32 as well as
        handle -m32, -m64 and -mx32.

        * config/i386/i386.h (TARGET_X32): Replace OPTION_ISA_X32
        with OPTION_ABI_X32.  Moved after TARGET_LP64.
        (TARGET_LP64): Changed to OPTION_ABI_64.

        * config/i386/i386.opt (m64): Replace ISA_64BIT with ABI_64.
        (mx32): Replace ISA_X32 with ABI_X32.

2012-03-28  Eric Botcazou  <ebotcazou@adacore.com>

        * tree.c (tree_size) <VECTOR_CST>: New case.

2012-03-28  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (ix86_modes_tieable_p): Handle 32bit AVX modes.
        (ix86_expand_vector_move_misalign): Remove un-needed gen_lowpart calls.

2012-03-28  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/52691
        * tree-ssa-ccp.c (optimize_stdarg_builtin): Optimize
        __builtin_va_start to __builtin_next_arg if the latter is
        builtin_decl_explicit_p rather than when it is not.

        PR middle-end/52750
        * tree-vect-generic.c (vector_element): Perform multiplication
        for pos in bitsizetype type instead of idx type.

2012-03-28  Richard Guenther  <rguenther@suse.de>

        * loop-init.c (loop_optimizer_init): If loops are preserved
        perform incremental initialization of required loop features.
        (loop_optimizer_finalize): If loops are to be preserved only
        clean up optional loop features.
        (rtl_loop_done): Forcefully free loops here.
        * cgraph.c (cgraph_release_function_body): Forcefully free loops.
        * cfgexpand.c (expand_gimple_cond): Properly add new basic-blocks
        to existing loops.
        (construct_init_block): Likewise.
        (construct_exit_block): Likewise.
        (gimple_expand_cfg): Clear LOOP_CLOSED_SSA loop state.  Cleanup
        the CFG after expanding.
        * cfgloop.c (verify_loop_structure): Calculate or verify dominators.
        If we needed to calculate them, free them afterwards.
        * tree-pass.h (PROP_loops): New define.
        * tree-ssa-loop.c (pass_tree_loop_init): Provide PROP_loops.
        * basic-block.h (CLEANUP_CFG_CHANGED): New.
        * cfgcleanup.c (merge_blocks_move): Protect loop latches.
        (cleanup_cfg): If we did something and have loops around, fix them up.
        * cse.c (rest_of_handle_cse_after_global_opts): Call cleanup_cfg
        with CLEANUP_CFG_CHANGED.
        * cfghooks.c (merge_blocks): If we merge a loop header into
        its predecessor, update the loop structure.
        (duplicate_block): If we copy a loop latch, adjust loop state
        to note we may have multiple latches.
        (delete_basic_block): Mark loops for fixup if we remove a loop.
        * cfganal.c (forwarder_block_p): Protect loop latches, headers
        and preheaders.
        * cfgrtl.c (rtl_can_merge_blocks): Protect loop latches.
        (cfg_layout_can_merge_blocks_p): Likewise.
        * cprop.c (bypass_block): If we create a loop with multiple
        entries, mark it for removal.
        * except.c (emit_to_new_bb_before): Add the new basic-block
        to existing loops.
        * tree-eh.c (lower_resx): Likewise.
        * omp-low.c (finalize_task_copyfn): Do not copy PROP_loops.
        (expand_omp_taskreg): Likewise.
        * tree-inline.c (initialize_cfun): Likewise.
        * tree-mudflap.c (add_bb_to_loop): Prototype.
        (mf_build_check_statement_for): Properly add new basic-blocks
        to existing loops.
        * tree-ssa-threadupdate.c (thread_block): Mark loops for fixup
        if we remove a loop.
        (thread_through_loop_header): Likewise.
        * trans-mem.c (tm_log_emit_save_or_restores): Properly add
        new basic-blocks to existing loops.
        (expand_transaction): Likewise.
        * Makefile.in (except.o): Add $(CFGLOOP_H).
        (expr.o): Likewise.
        (cgraph.o): Likewise.
        (cprop.o): Likewise.
        (cfgexpand.o): Likewise.
        (cfganal.o): Likewise.
        (trans-mem.o): Likewise.
        (tree-eh.o): Likewise.

2012-03-28  Georg-Johann Lay  <avr@gjlay.de>

        PR target/52692
        * config/avr/avr.c (TARGET_BUILTIN_DECL): New define.
        (avr_builtin_decl): New static function.
        (struct avr_builtin_description, avr_bdesc): Move up.
        Add GTY marker. Add field fndecl. Remove redundant field id.
        (avr_init_builtins): Initialize avr_bdesc[ID].fndecl.
        (avr_expand_builtin): Code cleanup because .id is removed.

2012-03-28  Georg-Johann Lay  <avr@gjlay.de>

        PR target/52737
        * config.gcc (tm_file): Remove avr/multilib.h.

        * doc/invoke.texi (AVR Options): Adjust documentation of -mtiny-stack.

        * config/avr/genmultilib.awk: Remove code to generate multilib.h.
        (BEGIN): Use -msp8 as multilib option instead of -mtiny-stack.
        * config/avr/t-avr: Remove generation of multilib.h.
        * config/avr/t-multilib: Regenerate.
        * config/avr/multilib.h: Remove.
        * config/avr/avr.opt (-msp8): New option.
        (avr_sp8): New variable.
        * config/avr/driver-avr.c (avr_device_to_sp8): New function.
        * config/avr/avr.h (AVR_HAVE_SPH): New define.
        (AVR_HAVE_8BIT_SP): Also set by avr_sp8 i.e. -msp8.
        (avr_device_to_sp8): New prototype.
        (EXTRA_SPEC_FUNCTIONS): Add { "device_to_sp8", avr_device_to_sp8 }
        (DRIVER_SELF_SPECS): New define.
        * config/avr/avr-c.c (avr_cpu_cpp_builtins): New built-in defines:
        __AVR_SP8__, __AVR_HAVE_SPH__.
        * config/avr/avr.c (output_movhi): Use AVR_HAVE_SPH instead of
        AVR_HAVE_8BIT_SP to decide if SP_H is present.
        (avr_file_start): Ditto.

2012-03-28  Jakub Jelinek  <jakub@redhat.com>

        PR target/52736
        * config/i386/sse.md (sse2_loadlpd splitter): Use offset 0
        instead of 8 in adjust_address.

2012-03-27  Aurelien Buhrig  <aurelien.buhrig.gcc@gmail.com>

        PR middle-end/51893
        * expmed.c (store_bit_field_1): Fix wordnum value for big-endian
        targets.

2012-03-27  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/50751
        * config/sh/sh.c (sh_legitimize_address, sh_legitimize_reload_address):
        Rearrange conditional logic.  Move displacement address calculations
        to ...
        (sh_find_mov_disp_adjust): ... this new function.

2012-03-27  H.J. Lu  <hongjiu.lu@intel.com>

        * config/arm/arm.opt (mapcs): Remove MaskExists.
        * config/cris/linux.opt (mno-gotplt): Likewise.
        * config/i386/i386.opt (mhard-float): Likewise.
        (msse4): Likewise.
        (mno-sse4): Likewise.
        * config/m68k/m68k.opt (mhard-float): Likewise.
        * config/mep/mep.op (mcop32): Likewise.
        * config/pa/pa-hpux.opt (msio): Likewise.
        * config/pa/pa64-hpux.opt (mgnu-ld): Likewise.
        * config/picochip/picochip.opt (mlittle): Likewise.
        * config/sh/sh.opt (mrenesas): Likewise.
        * config/sparc/long-double-switch.opt (mlong-double-128): Likewise.
        * config/sparc/sparc.opt (mhard-float): Likewise.
        * config/v850/v850.opt (mv850es): Likewise.
        * config/vax/vax.opt (mg-float): Likewise.

2012-03-27  Martin Jambor  <mjambor@suse.cz>

        PR middle-end/52693
        * tree-sra.c (sra_modify_assign): Do not call
        load_assign_lhs_subreplacements when working with an unscalarizable
        region.

2012-03-27  Uros Bizjak  <ubizjak@gmail.com>

        PR target/52698
        * config/i386/i386-protos.h (ix86_legitimize_reload_address):
        New prototype.
        * config/i386/i386.h (LEGITIMIZE_RELOAD_ADDRESS): New define.
        * config/i386/i386.c: Include reload.h.
        (ix86_legitimize_reload_address): New function.

2012-03-27  H.J. Lu  <hongjiu.lu@intel.com>

        * opth-gen.awk: Allocated a bit for Mask and InverseMask if it
        hasn't been allocated.  Define a target macro for Mask and
        InverseMask if it hasn't been defined.  Remove MaskExists handling.

        * doc/options.texi: Remove MaskExists.

2012-03-27  Chung-Lin Tang  <cltang@codesourcery.com>

        PR target/52667
        * config/sh/sh.c (find_barrier): Add equality check of last_got
        to avoid going above orig insn. Update comments.

2012-03-27  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52720
        * fold-const.c (try_move_mult_to_index): Handle &x.array more
        explicitely.

2012-03-27  Eric Botcazou  <ebotcazou@adacore.com>

        * expmed.c (store_bit_field): Assert that BITREGION_START is a multiple
        of a unit before computing the offset in units.
        * expr.c (get_bit_range): Return the null range if the enclosing record
        is part of a larger bit field.

2012-03-27  Tristan Gingold  <gingold@adacore.com>

        * config/ia64/vms.h (CASE_VECTOR_MODE): Define.
        * config/ia64/ia64.md: Remove mode in template.
        Sign extend operand in expand_simple_binop.
        * config/ia64/ia64.h (ASM_OUTPUT_ADDR_DIFF_ELT): Use
        CASE_VECTOR_MODE instead of TARGET_ILP32.
        (ADDR_VEC_ALIGN): Make it depends on CASE_VECTOR_MODE.

2012-03-26  Steven Bosscher  <steven@gcc.gnu.org>

        * varasm.c (assemble_external): #if 0 out the new assert from the
        previous commit, it breaks the Java and Go front ends.

2012-03-26  Steven Bosscher  <steven@gcc.gnu.org>

        * toplev.c (check_global_declaration_1): Do not call assemble_external.
        * expr.c (emit_block_move_libcall_fn): Likewise.
        (clear_storage_libcall_fn): Likewise.
        (expand_expr_addr_expr_1): Likewise.
        (expand_expr_real_1): Likewise.
        * calls.c (rtx_for_function_call): Likewise.

        * varasm.c (assemble_external): Assert this function is only called
        during or after expanding to RTL.

2012-03-26  Martin Jambor  <mjambor@suse.cz>

        PR tree-optimization/50052
        * tree-sra.c (tree_non_aligned_mem_p): Removed.
        (tree_non_aligned_mem_for_access_p): Likewise.
        (build_accesses_from_assign): Removed strict alignment requirements
        checks.
        (access_precludes_ipa_sra_p): Likewise.

2012-03-26  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52701
        * tree-vect-loop.c (vect_analyze_scalar_cycles_1): Always
        compute and set the evolution part of PHI nodes.

2012-03-26  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52721
        * tree-vect-stmts.c (vect_init_vector): Handle scalars.

2012-03-26  Ulrich Weigand  <ulrich.weigand@linaro.org>

        PR tree-optimization/52686
        * tree-vect-data-refs.c (vect_get_smallest_scalar_type): Handle
        WIDEN_LSHIFT_EXPR.

2012-03-26  Tristan Gingold  <gingold@adacore.com>

        * config/alpha/vms.h (LINK_SPEC): Simplify.
        (STARTFILE_SPEC): Remove -mvms-return-codes handling.
        (NAME__MAIN, SYMBOL__MAIN): Remove.
        (VMS_DEBUG_MAIN_POINTER): Remove.
        * config/ia64/vms.h: Likewise.
        * config/alpha/alpha.c (alpha_start_function): Move vms_debug_main
        code to vms.c.  Call vms_start_function.
        * config/ia64/ia64.c (ia64_start_function): Likewise.
        * config/vms/vms-protos.h (vms_start_function): Declare.
        * config/vms/vms.c (vms_start_function): New function.
        * config/vms/vms.h (MATH_LIBRARY): Define.
        (VMS_DEBUG_MAIN_POINTER): Define.

2012-03-26  Eric Botcazou  <ebotcazou@adacore.com>

        PR rtl-optimization/52629
        * reload1.c (count_pseudo): Short-circuit common case.
        (count_spilled_pseudo): Return early for pseudos without hard regs.
        Assert that the pseudo has got a hard reg before manipulating it.

2012-03-24  Jan Hubicka  <jh@suse.cz>

        PR lto/51663
        * varpool.c (varpool_finalize_decl): Handle toplevel_reorder here.
        (decide_is_variable_needed): Do not handle toplevel reorder here.
        * cgraph.h (varpool_can_remove_if_no_refs): Likewise.
        * ipa.c (cgraph_remove_unreachable_nodes): Remove unreachable vars
        even at -O0.

2012-03-24  Eric Botcazou  <ebotcazou@adacore.com>

        * expr.c (optimize_bitfield_assignment_op) <BIT_IOR_EXPR>: Use str_mode
        and str_bitsize instead of more convoluted expressions.

2012-03-24  Eric Botcazou  <ebotcazou@adacore.com>

        PR target/52610
        * config/sparc/sparc.h (ASM_CPU_SPEC): Pass -Av8 if -mcpu=leon.

2012-03-24  Eric Botcazou  <ebotcazou@adacore.com>

        PR target/52656
        * config/sparc/sparc.c (sparc_handle_vis_mul8x16): Fix pasto.

2012-03-23  Martin Jambor  <mjambor@suse.cz>

        * tree-sra.c (build_accesses_from_assign): Remove FIXME comment.

2012-03-23  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52678
        * tree-vectorizer.h (struct _stmt_vec_info): Add
        loop_phi_evolution_part member.
        (STMT_VINFO_LOOP_PHI_EVOLUTION_PART): New define.
        * tree-vect-loop.c (vect_analyze_scalar_cycles_1): Initialize
        STMT_VINFO_LOOP_PHI_EVOLUTION_PART.
        * tree-vect-loop-manip.c (vect_update_ivs_after_vectorizer):
        Use the cached evolution part and the PHI nodes value from
        the loop preheader edge instead of re-analyzing the evolution.

2012-03-22  Maxim Kuvyrkov  <maxim@codesourcery.com>

        * config/mips/mips-tables.opt: Update.
        * config/mips/mips.md (processor): Add xlp.
        * config/mips/mips-cpus.def: Add xlp.
        * config/mips/mips.c (mips_rtx_cost_data): Add costs for XLP, copy from
        5KF for now.
        * config/mips/mips.h (MIPS_ISA_LEVEL_SPEC): Handle xlp.
        * doc/invoke.texi: Mention XLP.

2012-03-22  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/52547
        * tree-nested.c (convert_tramp_reference_stmt): Call declare_vars
        on any new_local_var_chain vars declared during recursing on
        GIMPLE_OMP_PARALLEL or GIMPLE_OMP_TASK body.

2012-03-22  Uros Bizjak  <ubizjak@gmail.com>

        * config/alpha/alpha.h (ASM_OUTPUT_ALIGN): Move to config/alpha/elf.h
        (ASM_OUTPUT_SKIP): Move to config/alpha/vms.h
        (ASM_OUTPUT_LOCAL): Ditto.
        (ASM_OUTPUT_COMMON): Remove.
        * config/alpha/elf.h (ASM_OUTPUT_DEF_FROM_DECLS): Use ASM_OUTPUT_DEF.
        * config/alpha/vms.h (ASM_OUTPUT_ALIGN): Do not undefine before define.

2012-03-22  Jan Hubicka  <jh@suse.cz>

        PR middle-end/51737
        * cgraph.c (cgraph_remove_node_and_inline_clones): Add FORBIDDEN_NODE
        parameter.
        * cgraph.h (cgraph_remove_node_and_inline_clones): Update prototype.
        * ipa-inline-transform.c (save_inline_function_body): Remove
        copied clone if needed.
        * tree-inline.c (delete_unreachable_blocks_update_callgraph): Update.

2012-03-22  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52666
        * fold-const.c (fold_ternary_loc): Fix typo.

2012-03-22  Georg-Johann Lay  <avr@gjlay.de>

        PR target/52496
        * config/avr/avr.md (unspec): Remove UNSPEC_MEMORY_BARRIER.
        (unspecv): Add UNSPECV_MEMORY_BARRIER.
        (cli_sei): Use unspec_volatile instead of unspec for memory barrier.
        (delay_cycles_1, delay_cycles_2): Ditto.
        (delay_cycles_3, delay_cycles_4): Ditto.
        (nopv, *nopv): Ditto.
        (sleep, *sleep): Ditto.
        (wdr, *wdr): Ditto.

2012-03-22  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52548
        * tree-ssa-pre.c (valid_in_sets): Remove handling of invalidation
        because of clobbers.
        (prune_clobbered_mems): New function.
        (compute_antic_aux): Use it to prune ANTIC_OUT.
        (compute_partial_antic_aux): Use it to prune PA_IN.
        (compute_avail): Only insert expressions into EXP_GEN that are not
        invalidated when translated up to the beginning of the block.

2012-03-22  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52638
        * tree-vect-stmts.c (vect_init_vector_1): New function, split
        out from ...
        (vect_init_vector): ... here.  Handle scalar vector inits.
        (vect_get_vec_def_for_operand): Adjust.
        (vectorizable_load): Likewise.

2012-03-22  Uros Bizjak  <ubizjak@gmail.com>

        * config.gcc (alpha*-*-linux*): Add elfos.h to tm_file.
        (alpha*-*-freebsd*): Ditto.
        (alpha*-*-netbsd*): Ditto.
        (alpha*-*-openbsd*): Ditto.
        * config/alpha/elf.h (OBJECT_FORMAT_ELF): Remove.
        (DWARF2_DEBUGGING_INFO): Remove.
        (PREFERRED_DEBUGGING_TYPE): Remove.
        (ASM_FINAL_SPEC): Remove.
        (IDENT_ASM_OP): Remove.
        (ASM_OUTPUT_IDENT): Remove.
        (SKIP_ASM_OP): Remove.
        (ASM_OUTPUT_SKIP): Remove.
        (ALIGN_ASM_OP): Remove.
        (ASM_OUTPUT_BEFORE_CASE_LABEL): Remove.
        (ASM_OUTPUT_CASE_LABEL): Remove.
        (ASM_OUTPUT_EXTERNAL_LIBCALL): Remove.
        (COMMON_ASM_OP): Remove.
        (ASM_OUTPUT_ALIGNED_COMMON): Remove.
        (ASCII_DATA_ASM_OP): Remove.
        (READONLY_DATA_SECTION_ASM_OP): Remove.
        (INIT_SECTION_ASM_OP): Remove.
        (FINI_SECTION_ASM_OP): Remove.
        (ASM_SECTION_START_OP): Remove.
        (ASM_OUTPUT_SECTION_START_FILE): Remove.
        (TARGET_ASM_NAMED_SECTION): Remove.
        (TARGET_ASM_SELECT_SECTION): Remove.
        (MAKE_DECL_ONE_ONLY): Remove.
        (TYPE_ASM_OP): Remove.
        (SIZE_ASM_OP): Remove.
        (ASM_WEAKEN_LABEL): Remove.
        (TYPE_OPERAND_FMT): Remove.
        (ASM_DECLARE_RESULT): Remove.
        (ASM_DECLARE_OBJECT_NAME): Remove.
        (ASM_FINISH_DECLARE_OBJECT): Remove.
        (ELF_ASCII_ESCAPES): Remove.
        (ELF_STRING_LIMIT): Remove.
        (STRING_ASM_OP): Remove.
        (ASM_OUTPUT_EXTERNAL): Remove.
        (TARGET_ASM_FILE_START_FILE_DIRECTIVE): Redefine to false.
        * config/alpha/alpha.h (PCC_BITFIELD_TYPE_MATTERS): Undefine
        before define.
        (ASM_DECLARE_FUNCTION_NAME): Ditto.
        (ASM_DECLARE_FUNCTION_SIZE): Ditto.
        (ASM_GENERATE_INTERNAL_LABEL): Ditto.
        (ASM_OUTPUT_SKIP): Ditto.
        (READONLY_DATA_SECTION_ASM_OP): Remove.
        (USER_LABEL_PREFIX): Remove.
        (ASM_OUTPUT_ASCII): Remove.
        (ASM_OUTPUT_CASE_LABEL): Remove.
        (NO_DOLLAR_IN_LABEL): Undefine.

2012-03-22  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52459
        * tree-ssa-pre.c (inhibit_phi_insertion): Do not inhibit
        PHI insertion for calls.

2012-03-21  Steven Bosscher  <steven@gcc.gnu.org>

        * cse.c (invalidate_from_sets_and_clobbers, try_back_substitute_reg,
        find_sets_in_insn, canonicalize_insn): Split out from ...
        (cse_insn): ... here.
        (invalidate_from_clobbers): Take an insn instead of the pattern.

2012-03-21  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/52479
        * config/sh/sh-protos.h (sh_fsca_df2int): Remove.
        * config/sh/sh.c (sh_fsca_df2int_rtx, sh_fsca_df2int): Remove.
        * config/sh/sh.md (sindf2, cosdf2): Remove.

2012-03-21  Kaz Kojima  <kkojima@gcc.gnu.org>

        PR target/52642
        * config/sh/sh.c (sh_expand_prologue): Emit blockage at the end of
        prologue for unwinder and profiler.

2012-03-21  Andreas Tobler  <andreast@fgznet.ch>

        * configure.ac (HAVE_LD_NO_DOT_SYMBOLS): Add powerpc64-*-freebsd*.
        Introduce emul_name to select the right linker emulation for
        powerpc64-*-freebsd*.
        * configure: Regenerate.
        * config.gcc: Add bits to support powerpc64-*-freebsd*.
        * config/rs6000/freebsd.h (POWERPC_FREEBSD): Define.
        * config/rs6000/freebsd64.h: New file.
        * config/rs6000/rs6000.c (rs6000_option_override_internal): Use
        POWERPC_FREEBSD.
        (rs6000_savres_strategy): Likewise.
        (rs6000_savres_routine_name): Likewise.
        (rs6000_elf_file_end): Likewise.
        * config/rs6000/t-freebsd64: New file.
        * config/rs6000/sysv4.h (SUBTARGET_OVERRIDE_OPTIONS): Set the
        rs6000_current_abi for 64-bit FreeBSD to ABI_AIX.

        * config/rs6000/freebsd64.h: Remove duplicated entries from last
        commit.
        * config/rs6000/t-freebsd64: Likewise.

2012-03-21  Georg-Johann Lay  <avr@gjlay.de>

        PR rtl-optimization/52543
        PR target/52461
        * config/avr/avr-protos.h (avr_load_lpm): New prototype.
        * config/avr/avr.c (avr_mode_dependent_address_p): New function.
        (TARGET_MODE_DEPENDENT_ADDRESS_P): New define.
        (avr_load_libgcc_p): Restrict to __flash loads.
        (avr_out_lpm): Only handle 1-byte loads from __flash.
        (avr_load_lpm): New function.
        (avr_find_unused_d_reg): Remove.
        (avr_out_lpm_no_lpmx): Remove.
        (adjust_insn_length): Handle ADJUST_LEN_LOAD_LPM.
        * config/avr/avr.md (unspec): Add UNSPEC_LPM.
        (load_<mode>_libgcc): Use UNSPEC_LPM instead of MEM.
        (load_<mode>, load_<mode>_clobber): New insns.
        (mov<mode>): For multi-byte move from non-generic
        16-bit address spaces: Expand to load_<mode> resp.
        load_<mode>_clobber.
        (load<mode>_libgcc): Remove expander.
        (split-lpmx): Remove split.

2012-03-21  Richard Earnshaw  <rearnsha@arm.com>

        * neon.md (neon_vget_lanev2di): Use gen_lowpart and gen_highpart.
        * config/arm/neon.ml (Fixed_return_reg): Renamed to fixed_vector_reg.
        All callers changed.
        (Fixed_core_reg): New feature.
        (Vget_lane [sizes S64 and U64]): Add Fixed_core_reg.  Allow fmrrd in
        disassembly.
        * neon-testgen.ml: Handle Fixed_core_reg.

2012-03-21  Andrew Stubbs  <ams@codesourcery.com>

        * config/arm/arm.c (thumb2_reorg): Add complete support
        for 16-bit instructions.
        * config/arm/thumb2.md: Delete obsolete flag-clobbering peepholes.

2012-03-21  Richard Guenther  <rguenther@suse.de>

        PR tree-optimizer/52636
        * tree-vect-slp.c (vect_get_constant_vectors): Convert constants
        to the appropriate type.

2012-03-21  Richard Guenther  <rguenther@suse.de>

        * Makefile.in (cfgexpand.o): Add $(REGS_H) and $(INTEGRATE_H)
        dependencies.
        * cfgexpand.c (gimple_expand_cfg): Fold in pass_init_function,
        pass_jump, pass_initial_value_sets and pass_unshare_all_rtl.
        * passes.c (init_optimization_passes): Remove pass_init_function,
        pass_jump, pass_initial_value_sets and pass_unshare_all_rtl.
        * tree-pass.h (pass_init_function): Remove.
        (pass_jump): Remove.
        (pass_initial_value_sets): Remove.
        (pass_unshare_all_rtl): Remove.
        * integrate.c (pass_initial_value_sets): Remove.
        * emit-rtl.c (pass_unshare_all_rtl): Remove.
        * tree.h (init_function_for_compilation): Remove.
        * function.c (init_function_for_compilation): Remove.
        (pass_init_function): Remove.
        * cfgcleanup.c (rest_of_handle_jump): Remove.
        (pass_jump): Remove.

2012-03-20  Jason Merrill  <jason@redhat.com>

        * tree-streamer-in.c (streamer_alloc_tree): Call
        ggc_alloc_zone_cleared_tree_node instead of
        ggc_alloc_zone_cleared_tree_node_stat.

2012-03-20  Jonathan Wakely  <jwakely.gcc@gmail.com>

        * doc/extend.texi (Template Instantiation): Remove anachronisms.

2012-03-20  Jakub Jelinek  <jakub@redhat.com>

        PR target/52607
        * config/i386/i386.c (expand_vec_perm_vperm2f128): New function.
        (ix86_expand_vec_perm_const_1): Call it.

        * config/i386/i386.c (vselect_insn): New variable.
        (init_vselect_insn): New function.
        (expand_vselect, expand_vselect_insn): Add testing_p argument.
        Call init_vselect_insn if vselect_insn is NULL.  Adjust
        PATTERN (vselect_insn), instead of creating a new insn each time,
        only emit a copy of it if not testing and recog has been successful.
        (expand_vec_perm_pshufb, expand_vec_perm_1,
        expand_vec_perm_pshuflw_pshufhw, expand_vec_perm_broadcast_1): Adjust
        callers.

        PR target/52607
        * config/i386/i386.md ("isa" attribute): Add avx2 and noavx2.
        ("enabled" attribute): Handle avx2 and noavx2 isas.
        * config/i386/sse.md (avx2_vec_dupv8sf_1, avx2_pbroadcast<mode>_1):
        New insns.
        (vec_dup<mode>): Add avx2 =x,x alternative.
        (vec_dup<mode> splitter): Don't split if TARGET_AVX2.
        (*avx_vperm_broadcast_<mode>): Don't split V4DFmode if TARGET_AVX2.
        For TARGET_AVX2, V8SFmode and elt == 0 split into vbroadcastss.
        * config/i386/i386.c (expand_vec_perm_pshufb): Emit also vpermps
        for V8SFmode.
        (expand_vec_perm_1): For broadcasts, use avx2_pbroadcast<mode>_1
        if possible, handle also V8SFmode.

2012-03-20  Richard Earnshaw  <rearnsha@arm.com>

        * arm/predicates.md (zero_operand, reg_or_zero_operand): New predicates.
        * arm/neon.md (neon_vceq<mode>, neon_vcge<mode>): Use
        reg_or_zero_operand predicate.
        (neon_vcle<mode>, neon_vclt<mode>): Use zero_operand predicate.

2012-03-20  Jakub Jelinek  <jakub@redhat.com>

        * config/i386/i386.c (ix86_decompose_address) <case ZERO_EXTEND>:
        If operand isn't UNSPEC, return 0.

2012-03-20  Richard Guenther  <rguenther@suse.de>

        * tree-pass.h (pass_rtl_eh): Remove.
        * except.c (gate_handle_eh): Likewise.
        (rest_of_handle_eh): Likewise.
        (pass_rtl_eh): Likewise.
        (finish_eh_generation): Export.
        * except.h (finish_eh_generation): Declare.
        * passes.c (init_optimization_passes): Remove pass_rtl_eh.
        * cfgexpand.c (gimple_expand_cfg): Call finish_eh_generation
        after expanding stack alignment.  Instead of compacting blocks
        call cleanup_cfg.

2012-03-20  Richard Guenther  <rguenther@suse.de>

        * stor-layout.c (finish_bitfield_representative): Fallback
        to conservative maximum size if the padding up to the next
        field cannot be computed as a constant.
        (finish_bitfield_layout): If we cannot compute the distance
        between the start of the bitfield representative and the
        bitfield member start a new representative.
        * expr.c (get_bit_range): The distance between the start of
        the bitfield representative and the bitfield member is zero
        if the field offsets are not constants.

2012-03-20  Tristan Gingold  <gingold@adacore.com>

        * tree.h (enum size_type_kind): Add stk_ prefix to constants,
        convert in lowercase.
        (sizetype_tab, sizetype, bitsizetype, ssizetype, sbitsizetype)
        (size_int, ssize_int, bitsize_int, sbitsize_int): Adjust.
        * stor-layout.c (sizetype_tab): Adjust.
        (initialize_sizetypes): Use SIZETYPE instead of SIZE_TYPE.
        * tree-streamer.c (preload_common_nodes): Use stk_type_kind_last
        instead of type_kind_last.
        * tree-scalar-evolution.c (interpret_rhs_expr): Use size_int
        instead of size_int_kind.
        * doc/tm.texi.in (Type Layout): Document SIZETYPE.
        * doc/tm.texi: Regenerate.
        * defaults.h (SIZETYPE): Provide a default value.
        * config/vms/vms.h (SIZE_TYPE): Define as "unsigned int".
        (SIZETYPE): Define.

2012-03-20  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.md: Use braced string notation where applicable.

2012-03-19  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (allocate_stack): Simplify.

2012-03-19  Uros Bizjak  <ubizjak@gmail.com>

        * builtins.c (expand_builtin_cexpi): Use copy_addr_to_reg instead of
        copy_to_mode_reg (Pmode, ...).
        (expand_builtin_frame_address): Ditto.
        * expr.c (emit_block_move_via_libcall): Ditto.
        (set_storage_via_libcall): Ditto.

        * config/i386/i386.c (ix86_expand_movmem): Ditto.
        (ix86_expand_setmem): Ditto.
        (ix86_trampoline_init): DItto.
        * config/i386/i386.md (cmpstrnsi): Ditto.

2012-03-19  Sandra Loosemore  <sandra@codesourcery.com>

        * config/sh/sh.opt (madjust-unroll): Mark as ignored/obsolete.
        * config/sh/sh.h (TARGET_OPT_DEFAULT): Don't use MASK_ADJUST_UNROLL.
        * doc/invoke.texi (Option Summary): Remove -madjust-unroll.
        (SH Options): Likewise.

2012-03-19  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (get_thread_pointer): Add tp_mode argument.
        Generate ZERO_EXTEND in place if GET_MODE (tp) != tp_mode.
        (legitimize_tls_address) <TLS_MODEL_INITIAL_EXEC>: Always generate
        DImode UNSPEC_GOTNTPOFF references on TARGET_64BIT.
        (ix86_decompose_address): Allow zero extended UNSPEC_TP references.

        Revert:
        2012-03-13  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.h (TARGET_TLS_INDIRECT_SEG_REFS): New.
        * config/i386/i386.c (ix86_decompose_address): Use
        TARGET_TLS_INDIRECT_SEG_REFS to prevent %fs:(%reg) addresses.
        (legitimize_tls_address): Use TARGET_TLS_INDIRECT_SEG_REFS to load
        thread pointer to a register.

        Revert:
        2012-03-10  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.c (ix86_decompose_address): Disallow fs:(reg)
        if Pmode != word_mode.
        (legitimize_tls_address): Call gen_tls_initial_exec_x32 if
        Pmode == SImode for TARGET_X32.

        * config/i386/i386.md (UNSPEC_TLS_IE_X32): New.
        (tls_initial_exec_x32): Likewise.

2012-03-19  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/50751
        * config/sh/sh.h (CONST_OK_FOR_K04, CONST_OK_FOR_K12, DISP_ADDR_P,
        DISP_ADDR_OFFSET): New macros.
        * config/sh/sh.c (sh_address_cost): Add SH2A special case.
        (sh_legitimate_index_p): Allow QImode displacements for non-SH2A.
        (sh_legitimize_address): Add QImode displacement handling.
        (sh_cannot_change_mode_class): Disallow GENERAL_REGS for SFmode
        vector subregs.
        (sh_secondary_reload): Add QImode displacement handling.
        * config/sh/predicates.md (movsrc_no_disp_mem_operand): New predicate.
        * config/sh/constraints.md (K04, Snd, Sdd): New constraints.
        * config/sh/sh.md (extendqisi2): Remove constraints from expander.
        (*extendqisi2_compact): Rename to *extendqisi2_compact_reg, restrict
        to register operands only.
        (*extendqisi2_compact_mem_disp, *extendqisi2_compact_snd): New insns.
        (extendqihi2): Change insn to expander.
        (*extendqihi2_compact_reg): New insn.
        (movqi_i, movqi): Replace with ...
        (movqi, *movqi_reg_reg, *movqi_store_mem_disp12,
        *movqi_load_mem_disp, *movqi_load_mem_disp): ... these.
        Add new peepholes for QImode displacement addressing.

2012-03-19  Paolo Carlini  <paolo.carlini@oracle.com>

        PR c++/14710
        * doc/invoke.texi: Document -Wuseless-cast.

2012-03-19  Eric Botcazou  <ebotcazou@adacore.com>

        * tree.def (REALPART_EXPR, IMAGPART_EXPR, VIEW_CONVERT_EXPR): Move.
        * tree.h (handled_component_p): Reorder cases.
        * dwarf2out.c (loc_list_for_address_of_addr_expr_of_indirect_ref): Do
        not initialize unsignedp.
        (loc_list_from_tree): Likewise.
        (fortran_common): Likewise.
        * simplify-rtx.c (delegitimize_mem_from_attrs): Likewise.

2012-03-19  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (ix86_expand_prologue) <CM_LARGE_PIC>: Use Pmode
        mode consistently.  Use ix86_gen_add3.  Assert that Pmode == DImode.
        (ix86_expand_split_stack_prologue): Use ix86_gen_add3.
        (ix86_split_long_move): Ditto.
        (legitimize_tls_address): Use ix86_gen_sub3.
        (construct_plt_address): Assert that Pmode == DImode.

2012-03-18  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md: Remove empty predicates and/or constraints.
        * config/i386/sync.md: Ditto.
        * config/i386/sse.md: Ditto.
        * config/i386/mmx.md: Ditto.
        * config/i386/pentium.md: Ditto.
        * config/i386/athlon.md: Ditto.

2012-03-16  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52603
        * tree-vect-data-refs.c (vect_can_force_dr_alignment_p): Clarify
        comment.

        Revert
        2012-03-14  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52571
        * tree-vect-data-refs.c (vect_compute_data_ref_alignment): Move
        flag_section_anchors check ...
        (vect_can_force_dr_alignment_p): ... here.

2012-03-16  Martin Jambor  <mjambor@suse.cz>

        * expr.c (expand_expr_real_1): Handle misaligned scalar reads from
        memory through MEM_REFs by calling extract_bit_field.

2012-03-16  Richard Guenther  <rguenther@suse.de>

        * fold-const.c (native_interpret_expr): Also support POINTER_TYPE
        and REFERENCE_TYPE interpretations.
        (can_native_interpret_type_p): New function.
        (fold_ternary_loc): Use native encode/interpret to fold
        BIT_FIELD_REFs of constants.

2012-03-16  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52584
        * fold-const.c (fold_ternary_loc): Fold vector typed BIT_FIELD_REFs
        of vector constants and constructors.

2012-03-16  Richard Guenther  <rguenther@suse.de>

        * tree-vect-stmts.c (vect_get_vec_def_for_operand): Use
        VIEW_CONVERT_EXPR to convert constants.
        (vect_is_simple_use): Treat all constants as vec_constant_def.

2012-03-16  Richard Guenther  <rguenther@suse.de>
            Kai Tietz  <ktietz@redhat.com>

        PR middle-end/48814
        * gimplify.c (gimplify_self_mod_expr): Evaluate postfix
        side-effects completely in the pre-queue and use a temporary
        for the result.

2012-03-16  Richard Guenther  <rguenther@suse.de>

        * stor-layout.c (finish_bitfield_representative): Fall back
        to the conservative maximum size if we cannot compute the
        size of the tail padding.

2012-03-16  Tristan Gingold  <gingold@adacore.com>

        * config/vms/vms.h (TARGET_OS_CPP_BUILTINS): Define
        __CRTL_VER and __VMS_VER.
        * config/vms/vms-protos.h: Declare vms_c_get_crtl_ver
        and vms_c_get_vms_ver.
        * config/vms/vms-c.c (vms_c_get_crtl_ver, vms_c_get_vms_ver): New
        functions.
        * config/alpha/vms.h (VMS_DEFAULT_CRTL_VER)
        (VMS_DEFAULT_VMS_VER): Define.
        * config/ia64/vms.h (VMS_DEFAULT_CRTL_VER)
        (VMS_DEFAULT_VMS_VER): Define.

2012-03-16  Richard Guenther  <rguenther@suse.de>

        * tree-vect-loop.c (get_initial_def_for_induction): Use
        build_constructor directly.
        * tree-vect-stmts.c (vect_get_vec_def_for_operand): Use
        build_vector_from_val.
        * tree.c (build_vector_from_val): Avoid creating a constructor
        first when we want a constant vector.

2012-03-16  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/install.texi (Specific, *-*-solaris2*): Improve wording.

2012-03-16  Richard Guenther  <rguenther@suse.de>

        * tree.h (TREE_VECTOR_CST_ELTS): Remove.
        (VECTOR_CST_NELTS, VECTOR_CST_ELTS, VECTOR_CST_ELT): New defines.
        (struct tree_vector): Remove elements member, add variable size
        elts array member.
        (build_vector_stat): Declare.
        (build_vector): Define in terms of build_vector_stat.
        * tree.c (build_vector): Rename to ...
        (build_vector_stat): ... this.  Take array of trees as parameter.
        (build_vector_from_ctor): Adjust.
        (integer_zerop, integer_onep, integer_all_onesp, iterative_hash_expr,
        initializer_zerop): Adjust.
        * cfgexpand.c (expand_debug_expr): Likewise.
        * expr.c (categorize_ctor_elements_1, expand_expr_real_1,
        const_vector_from_tree): Likewise.
        * fold-const.c (const_binop, operand_equal_p, native_encode_vector,
        native_interpret_vector, fold_unary_loc, vec_cst_ctor_to_array,
        fold_vec_perm, fold_binary_loc, fold_ternary_loc): Likewise.
        * tree-streamer-in.c (streamer_alloc_tree): Handle TS_VECTOR.
        (lto_input_ts_vector_tree_pointers): Adjust.
        * tree-streamer-out.c (streamer_write_tree_header): Handle TS_VECTOR.
        (write_ts_vector_tree_pointers): Adjust.
        * varasm.c (const_hash_1, compare_constant, copy_constant,
        output_constant): Adjust.
        * gimple-fold.c (gimple_fold_stmt_to_constant_1): Adjust.
        * print-tree.c (print_node): Adjust.
        * tree-pretty-print.c (dump_generic_node): Adjust.
        * tree-vect-generic.c (uniform_vector_p, vector_element,
        lower_vec_perm): Adjust.
        * tree-vect-loop.c (get_initial_def_for_reduction): Adjust.
        * tree-vect-slp.c (vect_get_constant_vectors,
        vect_transform_slp_perm_load): Adjust.
        * tree-vect-stmts.c (vect_gen_perm_mask): Adjust.
        * expmed.c (make_tree): Adjust.
        * config/i386/i386.c (ix86_expand_builtin): Adjust.
        * config/sparc/sparc.c (sparc_handle_vis_mul8x16): Adjust interface
        and implementation.
        (sparc_fold_builtin): Adjust.

2012-03-16  Tristan Gingold  <gingold@adacore.com>

        * config.gcc (*-*-*vms*): Define use_gcc_stdint and tm_file.
        * config/vms/vms-stdint.h: New file.

2012-03-16  Tristan Gingold  <gingold@adacore.com>

        * config.host (alpha64-dec-*vms*, alpha*-dec-*vms*)
        (ia64-hp-*vms*): Replaced by ...
        (*-*-*vms*): ... This new entry.

2012-03-15  Jakub Jelinek  <jakub@redhat.com>

        PR target/52568
        * config/i386/i386.c (expand_vec_perm_vperm2f128_vblend): New function.
        (ix86_expand_vec_perm_const_1): Use it.

        PR target/52568
        * config/i386/sse.md (UNSPEC_VPERMDF): Remove.
        (avx2_permv4df): Remove.
        (avx2_permv4di): Macroize into...
        (avx2_perm<mode>): ... this using VI8F_256 iterator.
        (avx2_permv4di_1): Macroize into...
        (avx2_perm<mode>_1): ... this using VI8F_256 iterator.

2012-03-15  Ulrich Weigand  <ulrich.weigand@linaro.org>

        * combine.c (apply_distributive_law): Do not distribute SUBREG.

2012-03-15  Ira Rosen  <irar@il.ibm.com>
            Ulrich Weigand  <ulrich.weigand@linaro.org>

        * tree-vect-patterns.c (widened_name_p): Rename to ...
        (type_conversion_p): ... this.  Add new argument to determine
        if it's a promotion or demotion operation.  Check for
        CONVERT_EXPR_CODE_P instead of NOP_EXPR.
        (vect_recog_dot_prod_pattern): Call type_conversion_p instead
        widened_name_p.
        (vect_recog_widen_mult_pattern, vect_recog_widen_sum_pattern,
        vect_operation_fits_smaller_type, vect_recog_widen_shift_pattern):
        Likewise.
        (vect_recog_mixed_size_cond_pattern): Likewise and allow
        non-constant then and else clauses.

2012-03-15  Ira Rosen  <irar@il.ibm.com>
            Ulrich Weigand  <ulrich.weigand@linaro.org>

        * tree-vectorizer.h (vect_pattern_recog): Add new argument.
        * tree-vect-loop.c (vect_analyze_loop_2): Update call to
        vect_pattern_recog.
        * tree-vect-patterns.c (widened_name_p): Pass basic block
        info to vect_is_simple_use.
        (vect_recog_dot_prod_pattern): Fail for basic blocks.
        (vect_recog_widen_sum_pattern): Likewise.
        (vect_handle_widen_op_by_const): Support basic blocks.
        (vect_operation_fits_smaller_type,
        vect_recog_over_widening_pattern): Likewise.
        (vect_recog_vector_vector_shift_pattern): Support basic blocks.
        Update call to vect_is_simple_use.
        (vect_recog_mixed_size_cond_pattern): Support basic blocks.
        Add printing.
        (check_bool_pattern): Add an argument, update call to
        vect_is_simple_use and the recursive calls.
        (vect_recog_bool_pattern): Update relevant function calls.
        Add printing.
        (vect_mark_pattern_stmts): Update calls to new_stmt_vec_info.
        (vect_pattern_recog_1): Check for reduction only in loops.
        (vect_pattern_recog): Add new argument.  Support basic blocks.
        * tree-vect-stmts.c (vectorizable_conversion): Pass basic block
        info to vect_is_simple_use_1.
        * tree-vect-slp.c (vect_get_and_check_slp_defs): Support basic blocks.
        (vect_slp_analyze_bb_1): Call vect_pattern_recog.

2012-03-15  Jakub Jelinek  <jakub@redhat.com>
            Andrew Pinski  <apinski@cavium.com>

        PR middle-end/52592
        * builtins.c (expand_builtin_int_roundingfn_2): If expanding
        BUILT_IN_IR{INT,OUND}* using optab fails, emit lr{int,ound}*
        calls instead of __builtin_ir{int,ound}*.

2012-03-15  Bernhard Reutner-Fischer  <aldot@gcc.gnu.org>

        * doc/sourcebuild.texi (cleanup-modules, keep-modules): Update
        documentation.

2012-03-15  Ramana Radhakrishnan  <ramana.radhakrishnan@linaro.org>

        * config.gcc (target_type_format_char): New. Document it. Set it for
        arm*-*-* .
        * configure.ac (gnu_unique_option): Use target_type_format_char
        in test.  Comment rationale.
        * configure: Regenerate .

2012-03-15  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/52267
        * tree-vrp.c (masked_increment): New function.
        (register_edge_assert_for_2): Derive ASSERT_EXPRs
        from (X & CST1) cmp CST2 tests.

2012-03-15  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52580
        * tree-data-ref.c (subscript_dependence_tester_1): Check
        all dimensions for non-conflicting access functions.

2012-03-15  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR c++/44783
        * doc/invoke.texi [C++ Language Options]: Document
        -ftemplate-backtrace-limit.

2012-03-15  Tristan Gingold  <gingold@adacore.com>

        * c-parser.c (c_parser_parameter_declaration): Handle #pragma
        before a parameter.

2012-03-15  Tristan Gingold  <gingold@adacore.com>

        * dwarf2out.c (gen_subprogram_die): Require dwarf unwinding to
        use DW_OP_call_frame_cfa.

2012-03-14  H.J. Lu  <hongjiu.lu@intel.com>

        PR target/50797
        * config/i386/i386-opts.h (pmode): New.

        * config/i386/i386.c (ix86_option_override_internal): Properly
        check and set ix86_pmode.

        * config/i386/i386.h (Pmode): Check ix86_pmode instead of TARGET_64BIT.

        * config/i386/i386.opt (maddress-mode=): New.

        * doc/invoke.texi: Document -maddress-mode=short|long for x86.

2012-03-14  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * dwarf2cfi.c (def_cfa_0): Remove MIPS_DEBUGGING_INFO handling.
        (dwarf2out_do_cfi_asm): Likewise.
        * dwarf2out.c (output_call_frame_info): Remove MIPS_DEBUGGING_INFO
        handling.
        (add_data_member_location_attribute): Likewise.
        (gen_array_type_die): Likewise.
        (gen_subprogram_die): Likewise.
        (gen_producer_string): Likewise.
        * sdbout.c (sdbout_begin_prologue): Declare unconditionally.
        Remove MIPS_DEBUGGING_INFO handling.
        (sdb_debug_hooks): Likewise.
        (sdbout_begin_block): Likewise.
        (sdbout_end_block): Likewise.
        (sdbout_begin_prologue): Likewise.
        (sdbout_start_source_file): Likewise.
        (sdbout_end_source_file): Likewise.
        (sdbout_init): Likewise.
        * system.h (MIPS_DEBUGGING_INFO): Poison.

2012-03-14  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config/alpha/alpha.c [HAVE_STAMP_H]: Remove.
        (alpha_file_start) [MS_STAMP]: Remove.

        * config/alpha/elf.h (TARGET_GAS): Remove.
        * config/alpha/freebsd.h (TARGET_DEFAULT): Remove.
        * config/alpha/linux.h (TARGET_DEFAULT): Remove.
        * config/alpha/netbsd.h (TARGET_DEFAULT): Remove.
        * config/alpha/vms.h (TARGET_DEFAULT): Remove.
        * config.gcc (alpha*-*-linux*): Remove target_cpu_default.
        (alpha*-*-freebsd*): Likewise.
        (alpha*-*-netbsd*): Likewise.
        (alpha*-*-openbsd*): Likewise.
        (alpha*-*-*): Remove target_cpu_default2.
        * config/alpha/alpha.c (alpha_output_filename): Remove !TARGET_GAS
        handling.
        * config/alpha/alpha.h (TARGET_AS_CAN_SUBTRACT_LABELS): Remove.
        (TARGET_AS_SLASH_BEFORE_SUFFIX): Remove.
        * config/alpha/alpha.c (print_operand): Always assume
        TARGET_AS_SLASH_BEFORE_SUFFIX.
        * config/alpha/alpha.md ("*builtin_setjmp_receiver_er_sl_1"):
        Remove TARGET_AS_CAN_SUBTRACT_LABELS.
        ("*builtin_setjmp_receiver_er_1"): Remove.
        * config/alpha/alpha.opt (malpha-as): Remove.
        (mgas): Ignore.
        * doc/invoke.texi (Option Summary, DEC Alpha Options): Remove
        -malpha-as, -mgas.
        Remove DEC Unix reference.

        * config/alpha/alpha.h (OBJECT_FORMAT_COFF): Remove.
        (EXTENDED_COFF): Remove.
        * config/alpha/elf.h (OBJECT_FORMAT_COFF): Don't undef.
        (EXTENDED_COFF): Don't undef.
        * config/alpha/alpha.c (alpha_file_start): Always assume
        OBJECT_FORMAT_ELF.
        Don't set targetm.asm_file_start_file_directive.
        [!OBJECT_FORMAT_ELF]: Remove.
        (TARGET_ASM_FILE_START_FILE_DIRECTIVE): Remove.

        * config/alpha/alpha.h (SDB_DEBUGGING_INFO): Remove.
        (DBX_DEBUGGING_INFO): Remove.
        (MIPS_DEBUGGING_INFO): Remove.
        (PREFERRED_DEBUGGING_TYPE): Remove.
        (DBX_OUTPUT_SOURCE_LINE): Remove.
        (SDB_OUTPUT_SOURCE_LINE): Remove.
        (DBX_CONTIN_LENGTH): Remove.
        (NO_DBX_FUNCTION_END): Remove.
        (ASM_STABS_OP): Remove.
        (ASM_STABN_OP): Remove.
        (ASM_STABD_OP): Remove.
        (SDB_ALLOW_FORWARD_REFERENCES): Remove.
        (SDB_ALLOW_UNKNOWN_REFERENCES): Remove.
        (PUT_SDB_DEF): Remove.
        (PUT_SDB_PLAIN_DEF): Remove.
        (PUT_SDB_TYPE): Remove.
        (sdb_label_count): Remove.
        (PUT_SDB_BLOCK_START): Remove.
        (PUT_SDB_BLOCK_END): Remove.
        (PUT_SDB_FUNCTION_START): Remove.
        (PUT_SDB_FUNCTION_END): Remove.
        (PUT_SDB_EPILOGUE_END): Remove.
        * config/alpha/elf.h (SDB_DEBUGGING_INFO): Don't undef.
        (MIPS_DEBUGGING_INFO): Don't undef.
        (DBX_DEBUGGING_INFO): Don't undef.
        * config/alpha/vms.h (SDB_DEBUGGING_INFO): Don't undef.
        (MIPS_DEBUGGING_INFO): Don't undef.
        (DBX_DEBUGGING_INFO): Don't undef.
        * config/alpha/freebsd.h (DBX_CONTIN_CHAR): Remove.
        * config/alpha/alpha.c (alpha_option_override): Remove SDB_DEBUG
        handling.
        (alpha_start_function): Likewise.
        (sdb_label_count): Remove.
        (alpha_output_filename): Remove DBX_DEBUG handling.
        (alpha_file_start): Likewise.

2012-03-14  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config.gcc (enable_obsolete): Remove *-*-solaris2.8*.
        (*-*-solaris2.[0-8], *-*-solaris2.[0-8].*): Mark unsupported.
        (i[34567]86-*-solaris2*, x86_64-*-solaris2.1[0-9]*): Remove
        Solaris 8 support.
        * configure.ac (gcc_cv_ld_hidden): Remove *-*-solaris2.8*.
        (ld_tls_support): Remove Solaris 8 references.
        (lwp_dir, lwp_spec): Remove support for alternate thread library.
        * acinclude.m4 (gcc_cv_initfini_array): Remove *-*-solaris2.* tests.
        * configure: Regenerate.
        * config.in: Regenerate.

        * config/sol2.h (LINK_SPEC): Remove LIB_THREAD_LDFLAGS_SPEC.
        * config/i386/sol2.h: Remove Solaris 8 references.

        * doc/install.texi (Specific, i?86-*-solaris2.[89]): Rename to ...
        (i?86-*-solaris2.9): ... this.
        Remove Solaris 8 references.
        (Specific, *-*-solaris2*): Document Solaris 8 removal.
        Remove Solaris 8 references.

2012-03-14  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config.gcc (enable_obsolete): Remove mips-sgi-irix6.5.
        (mips-sgi-irix6.5*): Remove.
        * config.host (mips-sgi-irix*): Remove.
        * configure.ac (enable_fixed_point): Remove mips*-sgi-irix*.
        (set_have_as_tls): Remove *-*-irix6*.
        (gcc_cv_ld_static_dynamic): Remove mips-sgi-irix6*.
        * configure: Regenerate.

        * config/mips/iris6.h: Remove.
        * config/mips/iris6.opt: Remove.
        * config/mips/t-irix6: Remove.

        * config/mips/mips.h (TARGET_GPWORD): Remove IRIX 6 N64 handling.
        (TARGET_IRIX6): Remove.
        (TARGET_CPU_CPP_BUILTINS): Remove IRIX 6 handling.
        Don't define LANGUAGE_C, _LANGUAGE_C for Objective-C.
        * config/mips/mips.c (mips_build_builtin_va_list): Remove IRIX 6
        handling.
        (mips_file_start): Likewise.
        * config/mips/mips-protos.h (irix_asm_output_align): Remove.

        * config/mips/driver-native.c [__sgi__]: Remove.
        (host_detect_local_cpu) [__sgi__]: Remove.

        * config/mips/gnu-user.h: Remove iris5.h reference.

        * config/mips/mips-modes.def: Remove IRIX 6 reference.
        * config/mips/gnu-user64.h (MIPS_TFMODE_FORMAT): Remove.
        * config/mips/mips.c (mips_option_override) [MIPS_TFMODE_FORMAT]:
        Remove.

        * gcc.c (main): Move asm_debug initialization ...
        (asm_debug): ... here.

        * ginclude/stddef.h (__STDDEF_H__): Don't define.

        * defaults.h (LINK_ELIMINATE_DUPLICATE_LDIRECTORIES): Remove.
        * system.h (LINK_ELIMINATE_DUPLICATE_LDIRECTORIES): Poison.
        * collect2.c [LINK_ELIMINATE_DUPLICATE_LDIRECTORIES]: Remove.
        (main) [LINK_ELIMINATE_DUPLICATE_LDIRECTORIES]: Remove.
        [LINK_ELIMINATE_DUPLICATE_LDIRECTORIES] (is_in_args): Remove.
        * doc/tm.texi.in (Driver, LINK_ELIMINATE_DUPLICATE_LDIRECTORIES):
        Remove.
        * doc/tm.texi: Regenerate.

        * doc/invoke.texi (Debugging Options, -gdwarf-<version>): Remove
        IRIX 6 reference.
        (MIPS Options, -march): Remove IRIX reference.
        * doc/install.texi (Binaries, SGI IRIX): Remove.
        (Specific, mips-sgi-irix6): Document IRIX 6.5 removal, remove rest
        of section.
        * doc/trouble.texi (Interoperation): Remove -lgl_s handling.

2012-03-14  Martin Jambor  <mjambor@suse.cz>

        * expr.c (expand_assignment): Use expand_expr with EXPAND_WRITE
        when expanding MEM_REFs, MEM_TARGET_REFs and handled_component bases.
        (expand_expr_real_1): Do not handle misalignment if modifier is
        EXPAND_WRITE.

2012-03-14  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52584
        * tree-vect-generic.c (type_for_widest_vector_mode): Take
        element type instead of mode, use build_vector_type_for_mode
        instead of the langhook, build a vector of proper signedness.
        (expand_vector_operations_1): Adjust.

2012-03-14  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52582
        * gimple-fold.c (canonicalize_constructor_val): Make sure we have
        a cgraph node for a FUNCTION_DECL that comes from a constructor.
        (gimple_get_virt_method_for_binfo): Likewise.

2012-03-14  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52571
        * tree-vect-data-refs.c (vect_compute_data_ref_alignment): Move
        flag_section_anchors check ...
        (vect_can_force_dr_alignment_p): ... here.  Do not re-align
        DECL_COMMON variables.

2012-03-14  Richard Guenther  <rguenther@suse.de>

        * tree.h (DECL_BIT_FIELD_REPRESENTATIVE): New define.
        * stor-layout.c (start_bitfield_representative): New function.
        (finish_bitfield_representative): Likewise.
        (finish_bitfield_layout): Likewise.
        (finish_record_layout): Call finish_bitfield_layout.
        * tree.c (free_lang_data_in_decl): Only free DECL_QUALIFIER
        for QUAL_UNION_TYPE fields.
        * tree-streamer-in.c (lto_input_ts_field_decl_tree_pointers):
        Stream DECL_BIT_FIELD_REPRESENTATIVE.
        * tree-streamer-out.c (write_ts_field_decl_tree_pointers): Likewise.

        PR middle-end/52080
        PR middle-end/52097
        PR middle-end/48124
        * expr.c (get_bit_range): Unconditionally extract bitrange
        from DECL_BIT_FIELD_REPRESENTATIVE.
        (expand_assignment): Adjust call to get_bit_range.

2012-03-14  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52578
        * fold-const.c (fold_unary_loc): Fold (T1)(T2)x to (T1)x if
        the outermost conversion is a sign-change only.
        (fold_binary_loc): Disregard widening and sign-changing
        conversions when we determine if two variables are equal
        for reassociation.
        * tree-ssa-forwprop.c (combine_conversions): Fold (T1)(T2)x to
        (T1)x if the outermost conversion is a sign-change only.

2012-03-14  Uros Bizjak  <ubizjak@gmail.com>

        Revert:
        2012-03-14  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/predicates.md (constant_call_address_operand): Declare
        as special predicate.  Update all uses.

2012-03-13  Jakub Jelinek  <jakub@redhat.com>

        PR c/52577
        * c-parser.c (c_parser_postfix_expression)
        <case RID_BUILTIN_SHUFFLE>: Call mark_exp_read on argument values.

        * config/i386/smmintrin.h: Avoid /* within a comment.
        * config/i386/nmmintrin.h: Likewise.

2012-03-13  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (xbegin): Remove constraint from expander.

2012-03-13  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/predicates.md (constant_call_address_operand): Declare
        as special predicate.  Update all uses.
        * config/i386/i386.md: Remove mode from constant_call_address_operand
        predicates.
        * config/i386/i386.c (ix86_output_call_insn): Call
        constant_call_address_operand with VOIDmode.

2012-03-13  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (ix86_decompose_address): Handle subregs of
        AND zero extended address correctly.

2012-03-13  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/predicates.md (tls_symbolic_operand): Declare as
        special predicate.
        (tls_modbase_operand): Ditto.
        * config/i386/i386.md: Remove mode from tls_symbolic_operand and
        tls_modbase_operand predicates.

2012-03-13  Martin Jambor  <mjambor@suse.cz>

        * expr.c (expand_assignment): Handle misaligned scalar writes to
        memory through top-level MEM_REFs by calling store_bit_field.

2012-03-13  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52134
        * fold-const.c (fold_binary_loc): Fold (X * Y) & -(1 << CST) to X * Y
        if Y is a constant multiple of 1 << CST.

2012-03-13  Georg-Johann Lay  <avr@gjlay.de>

        PR target/52488
        * config/avr/avr.c (avr_prologue_setup_frame): Cut down stack
        offset (size) to a value the insns can deal with.
        (expand_epilogue): Ditto.

2012-03-13  Matthew Gretton-Dann  <matthew.gretton-dann@arm.com>

        * config/arm/neon.ml (ops): Fixup expected instructions for
        unsigned vector compares.

2012-03-13  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (ix86_decompose_address): Prevent %fs:(%reg)
        addresses only when %reg is not in word mode.

2012-03-13  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config/microblaze/microblaze.md: Fix typo.
        * tree-if-conv.c: Likewise.
        * tree-vect-patterns.c: Likewise.

2012-03-13  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config.gcc (extra_passes): Remove.
        * configure.ac (extra_passes): Don't substitute.
        * configure: Regenerate.
        * Makefile.in (EXTRA_PASSES): Remove.
        (GCC_PASSES): Remove $(EXTRA_PASSES).
        (MOSTLYCLEANFILES): Likewise.
        (native): Likewise.
        (install-common): Likewise.

2012-03-13  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.h (TARGET_TLS_INDIRECT_SEG_REFS): New.
        * config/i386/i386.c (ix86_decompose_address): Use
        TARGET_TLS_INDIRECT_SEG_REFS to prevent %fs:(%reg) addresses.
        (legitimize_tls_address): Use TARGET_TLS_INDIRECT_SEG_REFS to load
        thread pointer to a register.

2012-03-12  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.md (*tls_global_dynamic_64_<mode>): Remove :P
        on tls_symbolic_operand.
        (tls_global_dynamic_64_<mode>): Likewise.

2012-03-12  Georg-Johann Lay  <avr@gjlay.de>

        PR other/52545
        * output.h (SECTION_EXCLUDE, SECTION_MACH_DEP): Don't use
        SECTION_MACH_DEP reserved bits for SECTION_EXCLUDE.

2012-03-12  Georg-Johann Lay  <avr@gjlay.de>

        PR target/52499
        * config/avr/avr.c (avr_mode_code_base_reg_class): Change return
        type from reg_class_t to enum reg_class.
        * config/avr/avr-protos.h (avr_mode_code_base_reg_class): Ditto.

2012-03-12  Andrew Pinski  <apinski@cavium.com>

        * tree-ssa-phiopt.c (single_non_singleton_phi_for_edges): New function.
        (tree_ssa_phiopt_worker): Use single_non_singleton_phi_for_edges.
        (value_replacement): Likewise.
        (empty_block_p): Check also if the PHIs for the block are empty.

2012-03-12  Georg-Johann Lay  <avr@gjlay.de>

        PR target/52148
        * config/avr/avr.c (avr_out_movmem): Fix typo in output template
        for the case ADDR_SPACE_FLASH and AVR_HAVE_LPMX introduced in
        r184615 from 2012-02-28.

2012-03-12  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.c (ix86_gen_tls_global_dynamic_64): New.
        (ix86_gen_tls_local_dynamic_base_64): Likewise.
        (ix86_option_override_internal): Set ix86_gen_tls_global_dynamic_64
        and ix86_gen_tls_local_dynamic_base_64.
        (legitimize_tls_address): Use ix86_gen_tls_global_dynamic_64 and
        ix86_gen_tls_local_dynamic_base_64.

        * config/i386/i386.md (*tls_global_dynamic_64): Renamed to ...
        (*tls_global_dynamic_64_<mode>): This.
        (tls_global_dynamic_64): Renamed to ...
        (tls_global_dynamic_64_<mode>): This.
        (*tls_local_dynamic_base_64): Renamed to ...
        (*tls_local_dynamic_base_64_<mode>): This.
        (tls_local_dynamic_base_64): Renamed to ...
        (tls_local_dynamic_base_64_<mode>): This.

2012-03-12  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.c (ix86_option_override_internal): Properly
        set ix86_gen_leave and ix86_gen_monitor.  Check Pmode == DImode,
        instead of TARGET_64BIT, to set ix86_gen_add3, ix86_gen_sub3,
        ix86_gen_one_cmpl2, ix86_gen_andsp, ix86_gen_allocate_stack_worker,
        ix86_gen_adjust_stack_and_probe and ix86_gen_probe_stack_range.

        * config/i386/sse.md (sse3_monitor64): Renamed to ...
        (sse3_monitor64_<mode>): This.

2012-03-12  Tristan Gingold  <gingold@adacore.com>

        * config/ia64/ia64.c (ia64_function_arg_1): Move code around.
        (ia64_function_arg_advance): Ditto.

2012-03-12  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config.gcc (mips*-*-openbsd*): Remove.
        * config/mips/openbsd.h: Remove.
        * config/mips/sdb.h: Remove.

        * config/mips/mips.h (SDB_OUTPUT_SOURCE_LINE): Remove.
        * config/mips/mips.c (sdb_label_count): Remove.
        (mips_debugger_offset): Remove #if 0 code.
        (mips_output_function_prologue) [SDB_DEBUGGING_INFO]: Remove.
        * config/mips/sde.h (SDB_DEBUGGING_INFO): Don't undef.

2012-03-12  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/install.texi (Specific, i?86-*-solaris2.[89]): Update
        binutils reference.
        (Specific, i?86-*-solaris2.10): Remove GCC 4.0 reference.
        Update binutils references.
        (Specific, *-*-solaris2*): Mention bundled GCC in Solaris 10 and 11.
        Update binutils reference.
        Update Sun as/GNU ld caveat.
        Document binutils largefile requirement for LTO plugin.
        Remove reference to alternate libpthread.

2012-03-12  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config.gcc (alpha*-dec-osf5.1*): Remove.
        * config.host (alpha*-dec-osf*): Remove.
        * configure.ac (*-*-osf*): Remove.
        (alpha*-dec-osf*): Remove.
        * configure: Regenerate.

        * config/alpha/host-osf.c, config/alpha/osf5.h, config/alpha/osf5.opt,
        config/alpha/va_list.h, config/alpha/x-osf: Remove.

        * config/alpha/alpha.h (TARGET_LD_BUGGY_LDGP): Remove.
        * config/alpha/alpha.c (struct machine_function): Update comment.
        (alpha_start_function): Remove Tru64 UNIX as handling for
        max_frame_size.
        * config/alpha/alpha.md ("exception_receiver"): Remove
        TARGET_LD_BUGGY_LDGP.
        ("*exception_receiver_2"): Likewise.
        * except.c (finish_eh_generation): Remove Tru64 reference.
        * ginclude/stdarg.h [_HIDDEN_VA_LIST]: Don't undef _VA_LIST.
        * system.h (TARGET_HANDLE_PRAGMA_EXTERN_PREFIX): Poison.
        * target.def (handle_pragma_extern_prefix): Remove.

        * Makefile.in (mips-tfile.o-warn): Remove.
        (ALL_HOST_BACKEND_OBJS): Remove mips-tfile.o, mips-tdump.o.
        (mips-tfile, mips-tfile.o, mips-tdump, mips-tdump.o): Remove.
        * mips-tdump.c, mips-tfile.c: Remove.

        * doc/extend.texi (Symbol-Renaming Pragmas): Remove #pragma
        extern_prefix.
        * doc/install.texi (Binaries): Remove Tru64 UNIX reference.
        (Specific, alpha*-dec-osf5.1): Note removal.
        * doc/tm.texi.in (Misc, TARGET_HANDLE_PRAGMA_EXTERN_PREFIX):
        Remove.
        * doc/tm.texi: Regenerate.
        * doc/trouble.texi (Cross-Compiler Problems): Remove.

2012-03-12  Richard Guenther  <rguenther@suse.de>

        * config/arm/arm.c (neon_dereference_pointer): Do not call
        covert during RTL expansion.

2012-03-12  Tristan Gingold  <gingold@adacore.com>

        * doc/invoke.texi (VMS Options): Merge Alpha/VMS and IA-64/VMS
        Options.  Mention -mpointer-size.

2012-03-12  Richard Guenther  <rguenther@suse.de>

        * config/alpha/alpha.c (alpha_gimplify_va_arg): Use
        build_nonstandard_integer_type.

2012-03-12  Richard Guenther  <rguenther@suse.de>

        * tree.c (signed_or_unsigned_type_for): Use
        build_nonstandard_integer_type.
        (signed_type_for): Adjust documentation.
        (unsigned_type_for): Likewise.
        * tree-pretty-print.c (dump_generic_node): Use standard names
        for non-standard integer types if available.

2012-03-12  Tristan Gingold  <gingold@adacore.com>

        * config/vms/vms.opt: Add vms-opts.h header.
        (mmalloc64): Use flag_vms_malloc64 flag instead of MALLOC64
        target mask.
        (-mvms-return-codes): Document.
        (-mpointer-size): New option.
        (vms_pointer_size): Add enumeration.
        * config/vms/vms-opts.h: New file.
        * config/vms/vms.h (TARGET_OS_CPP_BUILTINS): Define
        __INITIAL_POINTER_SIZE.
        (POINTER_SIZE, SIZE_TYPE, PTRDIFF_TYPE): Adjust definition.
        (C_COMMON_OVERRIDE_OPTIONS): Define.
        (DWARF2_ADDR_SIZE): Define.
        * config/vms/vms.c (vms_patch_builtins): Adjust condition.
        * config/vms/vms-protos.h (vms_c_common_override_options):
        New prototype.
        * config/vms/vms-c.c (vms_pragma_pointer_size): Ignore pragma
        if -mno-pointer-size.
        (vms_c_common_override_options): New function.
        * config/ia64/vms.h (TARGET_DEFAULT): Remove MASK_MALLOC64.
        * config/alpha/vms.h (TARGET_DEFAULT): Remove MASK_MALLOC64.
        (MALLOC_ABI_ALIGNMENT): Use flag_vms_malloc64
        and flag_vms_pointer_size.
        (MASK_RETURN_ADDR): Set according to flag_vms_pointer_size.
        * config.gcc (*-*-*vms*): Define xm_file.
        (alpha*-dec-*vms*): Do not define xm_file.
        (alpha64-dec-*vms*): Remove.
        (ia64-hp-*vms*): Do not define xm_file.  Simplify tm_file
        and tmake_file.

2012-03-12  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/51721
        * tree-vrp.c (register_edge_assert_for_2): Add asserts for unsvar
        if (int) unsvar cmp CST.

2012-03-12  Richard Guenther  <rguenther@suse.de>

        * tree-sra.c (create_access_replacement): Only rename the replacement
        if we can rewrite it into SSA form.  Properly mark register typed
        replacements that we cannot rewrite with TREE_ADDRESSABLE.
        * tree-cfg.c (verify_expr): Fix BIT_FIELD_REF verification
        for aggregate or BLKmode results.

2012-03-12  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/52533
        * tree-vrp.c (register_edge_assert_for_2): Use double_int
        type for mask, only handle shifts by non-zero in-range
        shift count, for LE_EXPR and GT_EXPR if new_val is
        maximum, don't add the assertion.

2012-02-12  Kirill Yukhin  <kirill.yukhin@intel.com>

        * doc/invoke.texi: Document -mrtm option.
        * common/config/i386/i386-common.c (OPTION_MASK_ISA_RTM_SET): New.
        (OPTION_MASK_ISA_RTM_UNSET): Ditto.
        (ix86_handle_option): Handle OPT_mrtm.
        * config.gcc (i[34567]86-*-*): Add rtmintrin.h and
        xtestintrin.h.
        (x86_64-*-*): Ditto.
        * i386-builtin-types.def (INT_FTYPE_VOID): New.
        * config/i386/i386-c.c (ix86_target_macros_internal): Define
        __RTM__ if needed.
        (ix86_target_string): Define -mrtm option.
        (PTA_RTM): New.
        (ix86_option_override_internal): Extend "corei7-avx" with RTM option.
        Handle new option.
        (ix86_valid_target_attribute_inner_p): Add OPT_mrtm.
        (ix86_builtins): Add IX86_BUILTIN_XBEGIN, IX86_BUILTIN_XEND,
        IX86_BUILTIN_XTEST.
        (bdesc_special_args): Ditto.
        (ix86_init_mmx_sse_builtins): Add IX86_BUILTIN_XABORT.
        (ix86_expand_special_args_builtin): Handle new built-in type.
        (ix86_expand_builtin): Handle XABORT instruction.
        * config/i386/i386.h (TARGET_RTM): New.
        * config/i386/i386.md (UNSPECV_XBEGIN): New.
        (UNSPECV_XEND): Ditto.
        (UNSPECV_XABORT): Ditto.
        (UNSPECV_XTEST): Ditto.
        (xbegin): Ditto.
        (xbegin_1): Ditto.
        (xend): Ditto.
        (xabort): Ditto
        (xtest): Ditto.
        (xtest_1): Ditto.
        * config/i386/i386.opt (mrtm): New.
        * config/i386/immintrin.h: Include rtmintrin.h and xtestintrin.h.
        * config/i386/rtmintrin.h: New header.
        * config/i386/xtestintrin.h: Ditto.

2012-03-12  Tristan Gingold  <gingold@adacore.com>

        * ginclude/stddef.h: Adjust previous patch.
        Use __VMS__ instead of VMS.

2012-03-12  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (setcc + movzbl to xor + setcc peephole2):
        Also convert sequences with CC setting arithmetic instruction.

2012-03-11  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/invoke.texi (Option Summary): Move -no-integrated-cpp
        from C Language Options to Preprocessor Options.
        (C Dialect Options): Move -no-integrated-cpp documentation
        from here...
        (Preprocessor Options): ...to here.  Rewrite the description
        so it makes more sense, and remove discussion of merging front ends.

2012-03-11  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.c (ix86_expand_movmem): Use word_mode for size
        needed for loop.
        (ix86_expand_setmem): Likewise.

2012-03-11  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (ix86_zero_extend_to_Pmode): Rewrite using
        convert_to_mode.

2012-03-11  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.c (ix86_trampoline_init): Use movl for 64bit if
        ptr_mode == SImode.  Replace DImode with Pmode or ptr_mode.

2012-03-11  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.c (x86_this_parameter): Replace DImode with Pmode.

2012-03-11  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.md (lwp_slwpcb): Check Pmode instead of
        TARGET_64BIT.

2012-03-11  H.J. Lu  <hongjiu.lu@intel.com>
            Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/predicates.md (call_insn_operand): Allow
        constant_call_address_operand in Pmode only.
        (sibcall_insn_operand): Ditto.
        * config/i386/i386.md (*call): Use W mode iterator instead of P mode.
        (*call_vzeroupper): Ditto.
        (*sibcall): Ditto.
        (*sibcall_vzeroupper): Ditto.
        (*call_value): Ditto.
        (*call_value_vzeroupper): Ditto.
        (*sibcall_value): Ditto.
        (*sibcall_value_vzeroupper): Ditto.
        (*indirect_jump): Ditto.
        (*tablejump_1): Ditto.
        (indirect_jump): Convert memory address to word mode for TARGET_X32.
        (tablejump): Ditto.
        * config/i386/i386.c (ix86_expand_call): Convert indirect operands
        to word mode.

2012-03-11  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/51244
        * config/sh/sh.md (movnegt): Expand into respective insns immediately.
        Use movrt_negc instead of negc pattern for non-SH2A.
        (*movnegt): Remove.
        (*movrt_negc, *negnegt, *movtt, *movt_qi): New insns and splits.

2012-03-10  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.c (ix86_decompose_address): Disallow fs:(reg)
        if Pmode != word_mode.
        (legitimize_tls_address): Call gen_tls_initial_exec_x32 if
        Pmode == SImode for TARGET_X32.

        * config/i386/i386.md (UNSPEC_TLS_IE_X32): New.
        (tls_initial_exec_x32): Likewise.

2012-03-10  Chung-Lin Tang  <cltang@codesourcery.com>

        PR rtl-optimization/52528
        * combine.c (can_combine_p): Add setting of subst_low_luid
        before call to expand_field_assignment().

2012-03-09  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/invoke.texi: Use correct names/markup for "GCC", "GDB", "ld",
        and related program names.

2012-03-09  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/invoke.texi: Use correct names for "DWARF", "stabs", and "ELF".

2012-03-09  Uros Bizjak  <ubizjak@gmail.com>

        PR target/52530
        * config/i386/i386.c (ix86_print_operand): Handle 'E' operand modifier.
        (ix86_print_operand_address): Handle UNSPEC_LEA_ADDR. Do not fallback
        to set code to 'q'.
        * config/i386/i386.md (UNSPEC_LEA_ADDR): New unspec.
        (*movdi_internal_rex64): Use %E operand modifier for lea.
        (*movsi_internal): Ditto.
        (*lea_1): Ditto.
        (*lea<mode>_2): Ditto.
        (*lea_{3,4,5,6}_zext): Ditto.
        (*tls_global_dynamic_32_gnu): Ditto.
        (*tls_global_dynamic_64): Ditto.
        (*tls_dynamic_gnu2_lea_32): Ditto.
        (*tls_dynamic_gnu2_lea_64): Ditto.
        (pro_epilogue_adjust_stack_<mode>_add): Ditto.

2012-03-09  Michael Meissner  <meissner@linux.vnet.ibm.com>

        * config/rs6000/linux64.h (OPTION_TARGET_CPU_DEFAULT): Do not
        redefine to be NULL if the current bit-size is different from the
        configured bit-size.

        * config/rs6000/rs6000.c (rs6000_option_override_internal): If the
        cpu is defaulted, use PROCESSOR_DEFAULT and PROCESSOR_DEFAULT64 to
        set the default tuning.  Add asserts to make sure the cpu and tune
        indexes are defined.  Fix tests for cpu/tune index to use >= 0 to
        test whether the index is set, instead of > 0.
        (rs6000_file_start): Do not reset the default cpu if the current
        bit-size is different from the configured bit-size.

2012-03-09  Tristan Gingold  <gingold@adacore.com>

        * config/vms/vms-crtlmap.map: Add comments.
        Add entries needed to build Ada RTS.

2012-03-09  Tristan Gingold  <gingold@adacore.com>

        * ginclude/stddef.h: Do not define __size_t on VMS.

2012-03-09  Tristan Gingold  <gingold@adacore.com>

        * c-tree.h (c_default_pointer_mode): New variable.
        * c-decl.c (c_default_pointer_mode): New variable.
        (c_build_pointer_type): New function.
        (grokdeclarator): Call c_build_pointer_type instead
        of build_pointer_type.

        * config/vms/vms-c.c: Include c-tree.h
        (saved_pointer_mode): New variable.
        (handle_pragma_pointer_size): New function.
        (vms_pragma_pointer_size, vms_pragma_required_pointer_size): Likewise.
        (vms_c_register_pragma): Register __pointer_size and
        __required_pointer_size pragmas.

2012-03-09  Tristan Gingold  <gingold@adacore.com>

        * config/vms/vms-c.c (vms_construct_include_filename): New function.
        (vms_c_register_includes): Reference it.

2012-03-09  Andrew Pinski  <apinski@cavium.com>

        PR middle-end/51988
        * tree-ssa-phiopt.c: Include tree-pretty-print.h for
        print_generic_expr.
        (tree_ssa_phiopt_worker): Go through all the PHIs for
        value_replacement instead of just the singleton one.
        (value_replacement): Change return type to int.  Return 0 instead of
        false.
        Allow the middle basic block to contain more than just the defining
        statement.
        Handle non empty middle basic blocks.
        * Makefile.in (tree-ssa-phiopt.o): Add tree-pretty-print.h.

2012-03-09  Jiangning Liu  <jiangning.liu@arm.com>

        * tree-scalar-evolution (interpret_rhs_expr): generate chrec for
        array reference and component reference.
        (analyze_scalar_evolution_for_address_of): New.

2012-03-08  Jie Zhang  <jzhang918@gmail.com>

        PR target/49862
        * config/bfin/bfin.c (hwloop_optimize): Fix unused variable warnings.
        (hwloop_pattern_reg): Fix set but not used warning.
        (bfin_reorg_loops): Remove unused parameter.
        (bfin_reorg): Update use of bfin_reorg_loops.

2012-03-08  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.c (setup_incoming_varargs_64): Use word_mode
        with integer parameters in registers.
        (gen_push): Push register in word_mode instead of Pmode.
        (ix86_emit_save_regs): Likewise.
        (ix86_emit_save_regs_using_mov): Save integer registers in word_mode.
        (gen_pop): Pop register in word_mode instead of Pmode.
        (ix86_emit_restore_regs_using_pop): Likewise.
        (ix86_expand_prologue): Replace Pmode with word_mode for push
        immediate.  Use ix86_gen_pro_epilogue_adjust_stack.  Save and
        restore RAX and R10 in word_mode.
        (ix86_emit_restore_regs_using_mov): Restore integer registers
        in word_mode.
        (ix86_expand_split_stack_prologue): Save R10_REG and restore in
        word_mode.
        (ix86_split_to_parts): Use word_mode with PUT_MODE for push.
        (ix86_split_long_move): Likewise.

        * config/i386/i386.md (W): New.
        (*push<mode>2_prologue): Replace :P with :W.
        (*pop<mode>1): Likewise.
        (*pop<mode>1_epilogue): Likewise.
        (push/pop peephole2): Use word_mode scratch registers.

2012-03-08  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/predicates.md (indirect_branch_operand): Simplify.

2012-03-08  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.md (*addhi3, addhi3_clobber): Add "w" alternative
        for constants in [-63,63].

2012-03-08  Uros Bizjak  <ubizjak@gmail.com>

        PR target/52530
        Revert:
        2012-03-04  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.c (ix86_print_operand_address): Only handle
        zero-extended DImode addresses.

2012-03-08  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * configure.ac (gcc_cv_as_ix86_tlsldmplt): Add label.
        * configure: Regenerate.

2012-03-08  Georg-Johann Lay  <avr@gjlay.de>

        PR target/52496
        * config/avr/avr.c (avr_mem_clobber): New static function.
        (avr_expand_delay_cycles): Add memory clobber operand to
        delay_cycles_1, delay_cycles_2, delay_cycles_3, delay_cycles_4.
        * config/avr/avr.md (unspec): Add UNSPEC_MEMORY_BARRIER.
        (enable_interrupt, disable_interrupt): New expander.
        (nopv, sleep, wdr): New expanders.
        (delay_cycles_1): Add memory clobber.
        (delay_cycles_2): Add memory clobber.
        (delay_cycles_3): Add memory clobber.
        (delay_cycles_4): Add memory clobber.
        (cli_sei): New insn from former "enable_interrupt",
        "disable_interrupt" with memory clobber.
        (*wdt): New insn from former "wdt" with memory clobber.
        (*nopv): Similar, but for "nopv".
        (*sleep): Similar, but for "sleep".

2012-03-07  Oleg Endo  <olegendo@gcc.gnu.org>
            Kaz Kojima  <kkojima@gcc.gnu.org>

        PR target/52503
        * config/sh/sh.opt (msoft-atomic): Use Var instead of Mask.
        * config/sh/linux.h (TARGET_DEFAULT): Remove MASK_SOFT_ATOMIC.
        (SUBTARGET_OVERRIDE_OPTIONS): Define.

2012-03-07  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/predicates.md (x86_64_zext_general_operand): New.
        * config/i386/i386.md (*zero_extendsidi2_rex64): Change operand 1
        predicate to x86_64_zext_general_operand.  Accept "Z" constraint.

2012-03-07  Walter Lee  <walt@tilera.com>

        * config/tilegx/tilegx.c (tilegx_expand_prologue): Don't generate
        REG_CFA_* notes for the stack pointer.
        (tilegx_expand_epilogue): Restore stack pointer by adjusting it by
        EH_RETURN_STACKADJ_RTX.
        * config/tilepro/tilepro.c (tilepro_expand_prologue): Don't
        generate REG_CFA_* notes for the stack pointer.
        (tilepro_expand_epilogue): Restore stack pointer by adjusting it
        by EH_RETURN_STACKADJ_RTX.

2012-03-07  Georg-Johann Lay  <avr@gjlay.de>

        * doc/invoke.texi (AVR Built-in Macros): Correct condition for
        when __AVR_3_BYTE_PC__ is defined.

2012-03-07  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (ix86_print_operand_punct_valid_p): Add '^'.
        (ix86_print_operand): Handle '^'.
        * config/i386/i386.md (*strmovdi_rex_1): Macroize memory operands
        using P mode iterator.  Add %^ to asm template to conditionally emit
        addr32 prefix.
        (*rep_movdi_rex64): Ditto.
        (*strsetdi_rex_1): Ditto.
        (*rep_stosdi_rex64): Ditto.
        (*strmov{si,hi,qi}_1): Add %^ to asm template to
        conditionally emit addr32 prefix.
        (*rep_mov{si,qi}): Ditto.
        (*strset{si,hi,qi}): Ditto.
        (*rep_stos{si,qi}): Ditto.
        (*cmpstrnqi_nz_1): Ditto.
        (*cmpstrnqi_1): Ditto.
        (*strlenqi_1): Ditto.

2012-03-07  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.c (function_value_64): Return pointers in
        word_mode instead of Pmode.
        (ix86_promote_function_mode): Likewise.

2012-03-07  Richard Guenther  <rguenther@suse.de>

        * coverage.c (get_gcov_type): Use type_for_mode.
        (get_gcov_unsigned_t): Likewise.
        * expr.c (store_constructor): Use type_for_mode.
        (try_casesi): Likewise.
        * tree-ssa-loop-ivopts.c (add_standard_iv_candidates_for_size): Remove.
        (add_standard_iv_candidates): Use standard type trees.
        * dojump.c (do_jump): Remove dead code.

2012-03-07  Richard Guenther  <rguenther@suse.de>

        * c-typeck.c (pointer_diff): Use c_common_type_for_size.

2012-03-07  Richard Guenther  <rguenther@suse.de>

        * convert.c (strip_float_extensions): Move ...
        * tree.c (strip_float_extensions): ... here.

2012-03-07  Georg-Johann Lay  <avr@gjlay.de>

        PR target/52484
        * config/avr/avr.md (xload<mode>_A): Add R22... to register footprint.

2012-03-07  Richard Guenther  <rguenther@suse.de>

        * omp-low.c (extract_omp_for_data): Use signed_type_for.
        (expand_omp_for_generic): Likewise.
        (expand_omp_for_static_nochunk): Likewise.
        (expand_omp_for_static_chunk): Likewise.
        * tree-vect-stmts.c (vect_gen_perm_mask): Use type_for_mode.
        * tree-vect-slp.c (vect_transform_slp_perm_load): Likewise.
        * tree-vect-loop-manip.c (vect_gen_niters_for_prolog_loop):
        Use unsigned_type_for.
        (vect_create_cond_for_align_checks): Use signed_type_for.

2012-03-07  Andrey Belevantsev  <abel@ispras.ru>

        PR rtl-optimization/52203
        * sel-sched.c (estimate_insn_cost): New parameter pempty.  Adjust
        all callers to pass NULL except ...
        (reset_sched_cycles_in_current_ebb): ... here, save the value
        in new variable 'empty'.  Increase issue_rate only for
        non-empty insns.

2012-03-07  Ralf Corsépius  <ralf.corsepius@rtems.org>

        PR target/51417
        * Makefile.in: Let install-gcc-ar depend on installdirs,
        gcc-ar$(exeext), gcc-nm$(exeext), gcc-ranlib$(exeext).
        Don't double canonicalize if cross-compiling.

2012-03-07  Georg-Johann Lay  <avr@gjlay.de>

        PR target/52506
        * config/avr/avr.c (expand_epilogue): Fix order of restoration
        to: RAMPZ, RAMPY, RAMPX, RAMPD.
        (expand_prologue): Only clear RAMPZ if it has effect on RAM-read.

2012-03-07  Georg-Johann Lay  <avr@gjlay.de>

        PR target/52505
        * config/avr/avr.c (avr_out_xload): Don't read unintentionally
        from RAM.
        * config/avr/avr.md (xload_8): Adjust insn length.

2012-03-07  Georg-Johann Lay  <avr@gjlay.de>

        PR target/52461
        * config/avr/avr.c (avr_out_lpm): Clear RAMPZ after usage
        if RAMPZ affects reading from RAM.

2012-03-07  Richard Guenther  <rguenther@suse.de>

        PR pch/52518
        PR pch/38987
        * doc/invoke.texi (Precompiled Headers): Remove sentence that
        suggests you can include PCHs from inside another header.

2012-03-07  Richard Sandiford  <rdsandiford@googlemail.com>

        PR middle-end/52515
        * rtl.h (pc_rtx, cc0_rtx, ret_rtx, simple_return_rtx): Add GTY markers.

2012-03-07  Kai Tietz  <ktietz@redhat.com>

        * doc/invoke.texi (fwritable-relocated-rdata): Document
        new Cygwin/MinGW target option.
        * config/i386/winnt.c (i386_pe_unique_section): Ignore
        reloc if flag -fwritable-relocated-rdata is not set.
        (i386_pe_section_type_flags): Likewise.
        * config/i386/cygming.opt (fwritable-relocated-rdata):
        Add new flag variable flag_writable_rel_rdata.

2012-03-07  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-math-opts.c (convert_mult_to_widen): Check actual
        precision against gimple constraints.

2012-03-06  Richard Sandiford  <rdsandiford@googlemail.com>

        PR middle-end/52372
        * rtl.h (pc_rtx, ret_rtx, simple_return_rtx, cc0_rtx): Redefine as
        variables.
        (GR_PC, GR_CC0, GR_RETURN, GR_SIMPLE_RETURN): Delete.
        * emit-rtl.c (pc_rtx, ret_rtx, simple_return_rtx, cc0_rtx): New
        variables.
        (init_emit_regs): Move associated initialization to...
        (init_emit_once): ...here.

2012-03-06  Richard Henderson  <rth@redhat.com>

        * config/m68k/m68k.h (ISA_HAS_TAS): New.
        * config/m68k/sync.md (atomic_test_and_set): Use it.
        (atomic_test_and_set_1): Likewise.

2012-03-06  Michael Meissner  <meissner@linux.vnet.ibm.com>

        PR target/50310
        * config/rs6000/vector.md (vector_uneq<mode>): Add support for
        UNEQ, LTGT, ORDERED, and UNORDERED IEEE vector comparisons.
        (vector_ltgt<mode>): Likewise.
        (vector_ordered<mode>): Likewise.
        (vector_unordered<mode>): Likewise.
        * config/rs6000/rs6000.c (rs6000_emit_vector_compare_inner): Likewise.

2012-03-06  Aldy Hernandez  <aldyh@redhat.com>

        * trans-mem.c: New typedef for tm_region_p.
        Define vector types for tm_region_p.
        (tm_region_init): Replace region_worklist to a vector called
        bb_regions.

2012-03-06  Richard Guenther  <rguenther@suse.de>

        * fold-const.c (build_fold_addr_expr_with_type_loc): Fold
        MEM_REF with constant pointer operand.

2012-03-06  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52493
        * tree-ssa-alias.c (ptr_derefs_may_alias_p): Robustify.

2012-03-06  Tristan Gingold  <gingold@adacore.com>

        * config/vms/vms-c.c (vms_pragma_nomember_alignment): Handle octaword.
        (external_model_kind): Improve documentation.
        (vms_pragma_extern_model): Handle relaxed_redef.
        (vms_c_register_pragma): Allow expansion for nomember_alignment.

2012-03-06  Georg-Johann Lay  <avr@gjlay.de>

        * doc/invoke.texi (AVR Options): -mmcu=: Document the XMEGA cores.
        Explain RAMPD, RAMPX, RAMPDY, RAMPZ usage by avr-gcc.
        Some more notes on EIND usage and reorder EIND subsection.

2012-03-06  Tristan Gingold  <gingold@adacore.com>

        * config/vms/vms.c (VMS_CRTL_LDBL): Rename from VMS_CRTL_PRNTF.
        * config/vms/vms-crtlmap.map: Rename PRNTF to LDBL.

2012-03-06  Tristan Gingold  <gingold@adacore.com>

        * config/vms/t-vmsnative (version): Define.
        * config/vms/t-vms (STMP_FIXPROTO, STMP_FIXINC, version): Remove.

2012-03-06  Andrey Belevantsev  <abel@ispras.ru>

        PR rtl-optimization/52250
        * sel-sched-ir.c (maybe_tidy_empty_bb): Try harder to find a bb
        to put note list into.  Unconditionally call move_bb_info.
        (move_bb_info): Do not assert the blocks being in the same region,
        just drop the note list if they are not.

2012-03-06  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/51244
        * config/sh/sh.c (sh_expand_t_scc): Remove SH2A special case
        and use unified expansion logic.
        * config/sh/sh.md (xorsi3_movrt): Rename to movrt.  Move
        closer to the existing movt insn.
        (negc): Rename insn to *negc.  Add new expander.
        (movnegt): Use xor pattern for T bit negation.  Reserve helper
        constant for negc pattern.
        (*movnegt): New insn and splitter.

2012-03-05  Bernd Schmidt  <bernds@codesourcery.com>

        * c-typeck.c (pointer_diff): Check for POINTER_PLUS_EXPR, not
        PLUS_EXPR.

2012-03-05  Richard Henderson  <rth@redhat.com>

        * genemit.c (main): Include "target.h" in insn-emit.c.
        * Makefile.in (insn-emit.o): Depend on TARGET_H.
        * config/sh/sync.md (atomic_test_and_set): Reference
        targetm.atomic_test_and_set_trueval instead of
        TARGET_ATOMIC_TEST_AND_SET_TRUEVAL.

2012-03-05  Joern Rennecke  <joern.rennecke@embecosm.com>

        * config/epiphany/epiphany.c (epiphany_function_value_regno_p):
        Make static.

2012-03-05  Steven Bosscher  <steven@gcc.gnu.org>

        * langhooks.c (add_builtin_type): New function.
        * langhooks.h (add_builtin_type): Export it.
        * config/mep/mep.c (mep_init_builtins): Use it.
        * config/rs6000/rs6000.c (rs6000_init_builtins): Use it.

2012-03-05  Jakub Jelinek  <jakub@redhat.com>

        PR debug/51902
        * tree.h (BLOCK_SAME_RANGE): Define.
        * function.c (block_fragments_nreverse): Clear BLOCK_SAME_RANGE
        if BLOCK_FRAGMENT_CHAIN is non-NULL, but has it cleared.
        Also clear BLOCK_SAME_RANGE if fragment chain's supercontext fragment
        isn't equal to supercontext fragment's fragment chain.
        Adjust BLOCK_SUPERCONTEXT to point to supercontext fragment's
        fragment origin.
        (blocks_nreverse_all): Likewise.
        (reorder_blocks_1): Compute BLOCK_SAME_RANGE bits.  Set
        BLOCK_SUPERCONTEXT to supercontext fragment instead of
        supercontext fragment's fragment origin.
        * dwarf2out.c (add_high_low_attributes): If stmt has the same
        range as its parent (or parents thereof etc.), use the parent's
        DW_AT_ranges value instead of creating a new .debug_ranges range.

2012-03-05  Richard Henderson  <rth@redhat.com>

        PR tree-opt/52242
        Revert: 2011-11-26  Richard Henderson  <rth@redhat.com>
        * omp-low.c (expand_omp_atomic): Assume anything aligned to
        BIGGEST_ALIGNMENT is aligned.

2012-03-05  Richard Henderson  <rth@redhat.com>

        * config/sh/sh.h (TARGET_ATOMIC_TEST_AND_SET_TRUEVAL): Move...
        * config/sh/sh.c: ... here.

2012-03-05  Richard Henderson  <rth@redhat.com>

        PR target/52481
        * config/m68k/sync.md (atomic_test_and_set): Use expand_simple_unop
        instead of calling negqi2 directly.

2012-03-05  Aldy Hernandez  <aldyh@redhat.com>

        PR middle-end/52463
        * trans-mem.c (tm_region_init): Use last_basic_block.

2012-03-05  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.h (TARGET_ATOMIC_TEST_AND_SET_TRUEVAL): New hook.
        * config/sh/sync.md (atomic_test_and_set): New expander.
        (tasb, atomic_test_and_set_soft): New insns.
        * config/sh/sh.opt (menable-tas): New option.
        * doc/invoke.texi (SH Options): Document it.

2012-03-05  Richard Guenther  <rguenther@suse.de>

        * cfgloop.c (verify_loop_structure): Verify dominators before
        using them.
        * graphite-clast-to-gimple.c (graphite_verify): Do not verify
        dominators from here.
        * graphite-scop-detection.c (create_sese_edges): Likewise.
        * loop-doloop.c (doloop_optimize_loops): Likewise.
        * loop-init.c (loop_optimizer_init): Likewise.
        * loop-unroll.c (unroll_and_peel_loops): Likewise.
        * loop-unswitch.c (unswitch_loops): Likewise.
        * tree-ssa-loop-manip.c (tree_transform_and_unroll_loop): Likewise.
        * tree-parloops.c (parallelize_loops): Likewise.  Verify
        only when checking is enabled.
        * tree-loop-distribution.c (tree_loop_distribution): Likewise.

2012-03-05  Bernd Schmidt  <bernds@codesourcery.com>

        * genautomata.c (parse_automata_opt): New static function.
        (initiate_automaton_gen): Remove all option handling code.  Remove
        argc argument.  All callers changed.
        (main): Call init_rtx_reader_args_cb with the new function as argument.

2012-03-05  Richard Guenther  <rguenther@suse.de>

        * cfgexpand.c (gimple_expand_cfg): Free dominator info.
        * tree-if-conv.c (combine_blocks): Free post-dominator info
        after breaking it.
        * tree-parloops.c (create_parallel_loop): Free and re-compute
        dominator info after breaking it.

2012-03-05  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52353
        * optabs.h (trapv_unoptab_p): New function.
        (trapv_binoptab_p): Likewise.
        * optabs.c (expand_binop): Use emit_libcall_block_1 with
        a proper equiv_may_trap argument.
        (expand_unop): Likewise.
        (emit_libcall_block_1): Take extra argument whether the
        instruction may trap.  Renamed from ...
        (emit_libcall_block): ... this.  New wrapper.

2012-03-05  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/51721
        * tree-vrp.c (register_edge_assert_for_2): If comparing
        lhs of right shift by constant with an integer constant,
        add ASSERT_EXPRs for the rhs1 of the right shift.

        * cfgrtl.c (cfg_layout_merge_blocks): Cleanup.

2012-03-05  Richard Guenther  <rguenther@suse.de>

        * tree.c (integer_zerop): Handle VECTOR_CSTs.
        (integer_onep): Likewise.
        (integer_all_onesp): Likewise.

2012-03-05  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.md (*umaddqihi4.2): New insn-and-split.

2012-03-04  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.c (pro_epilogue_adjust_stack): Check Pmode
        instead of TARGET_64BIT.

2012-03-04  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.c (ix86_expand_prologue): Check Pmode to set
        adjust_stack_insn.

2012-03-04  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.c (ix86_print_operand_address): Only handle
        zero-extended DImode addresses.

2012-03-04  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (ix86_print_operand) <case '+'>: Declare
        taken and cputaken as bool.

2012-03-04  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/constraints.md (Ya): New internal constraint.
        * config/i386/i386.md (zero_extendsidi2): Remove expansion.
        (*zero_extendsidi2_rex64): Add x,x alternative.
        (*zero_extendsidi2): Ditto.  Add o,0 alternative.
        Remove flags reg clobber.  Adjust corresponding splits.
        (zero_extend<mode>si2): Macroize expander from zero_extendhisi2 and
        zero_extendqisi2 expanders using SWI12 mode iterator.
        (zero_extend<mode>si2_and): Macroize insn from
        zero_extendhisi2_and and zero_extendqisi2_and.  Merge corresponding
        splitters.
        (*zero_extend<mode>si2):  Macroize insn from
        *zero_extendhisi2_movzbl and *zero_extendqisi2_movzbl.
        (*zero_extend*2_movzbl_and): Remove insn patterns.
        (zero_extendqihi2_and): Merge corresponding splitter.
        (*zero_extendqihi2): Rename from *zero_extendqihi2_movzbl.
        (*zero_extend*2_movzbl_and): Remove insn patterns.
        (*anddi_1): Split TYPE_IMOVX instructions.
        (*andsi_1): Use Ya for alternative 2.  Split TYPE_IMOVX instructions.
        (*andhi_1): Ditto.
        (and->zext splitter): Add splitter pattern.
        (zero extend with andsi3 splitter): Adjust zero_extend pattern.

2012-03-04  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/invoke.texi (C++ Dialect Options): Minor copy-edits to
        x86-specific text.
        (Debugging Options): Likewise.
        (Optimize Options): Likewise.
        (i386 and x86-64 Options): Discuss -march before -mtune, consistently
        with other architectures.  Use official processor names with correct
        spelling/capitalization.  Fix formatting and grammar issues.
        (i386 and x86-64 Windows Options): Similar cleanup here.

2012-03-03  Kaz Kojima  <kkojima@gcc.gnu.org>

        * config/sh/sh.md (abssi2): Add TARGET_SH1 condition.

2012-03-03  Kaz Kojima  <kkojima@gcc.gnu.org>

        * config/sh/sh.c (sh_dwarf_register_span): Don't apply
        DBX_REGISTER_NUMBER.

2012-03-03  Kaz Kojima  <kkojima@gcc.gnu.org>

        * config/sh/sh.c (shiftcosts): Return MAX_COST when the first
        operand is CONST_INT.  Take COSTS_N_INSNS into account.
        (sh_rtx_costs): Don't apply COSTS_N_INSNS to the return value
        of shiftcosts.

2012-03-02  Richard Henderson  <rth@redhat.com>

        * optabs.c (expand_atomic_test_and_set): Honor
        atomic_test_and_set_trueval even when atomic_test_and_set
        optab is not in use.

2012-03-02  Kaz Kojima  <kkojima@gcc.gnu.org>

        PR target/48596
        PR target/48806
        * config/sh/sh.c (sh_register_move_cost): Increase cost between
        GENERAL_REGS and FP_REGS for SImode.

2012-03-02  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/49486
        * config/sh/sh.md (negdi2): Add TARGET_SH1 condition.
        (absdi2): New expander.
        (*absdi2, *negabsdi2, negdi_cond): New insns and splits.

2012-03-02  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sync.md (atomic_exchange<mode>): New expander.
        (atomic_exchange<mode>_soft): New insn.

2012-03-02  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sync.md: Update copyright notice dates.
        (atomic_compare_and_swap<mode>): Use SImode for return value instead
        of QImode.
        (atomic_compare_and_swap<mode>_soft): Likewise.

2012-03-02  Oleg Endo  <olegendo@gcc.gnu.org>

        PR target/31640
        * config/sh/sh.h (LOOP_ALIGN): Move logic to sh_loop_align.
        * config/sh/sh.c: Update copyright notice dates.
        (sh_loop_align): Add logic from LOOP_ALIGN.  Don't disable loop
        alignment for TARGET_HARD_SH4.
        (sh_option_override): Reduce default function alignment.  Set
        loop alignment to 4 bytes when not optimizing for size.

2012-03-02  Maxim Kuvyrkov  <maxim@codesourcery.com>

        PR middle-end/50335
        * doc/invoke.texi (floop-flatten): Remove.
        * toplev.c (process_options): Remove references to flag_loop_flatten.
        * tree-ssa-loop.c (gate_graphite_transform): Same.
        * common.opt (floop-flatten): Obsolete.
        * graphite-poly.c (apply_poly_transforms): Remove reference to
        flag_loop_flatten.
        * Makefile.in (graphite-flattening.o): Remove.
        * graphite-flattening.c: Remove.

2012-03-02  Uros Bizjak  <ubizjak@gmail.com>

        * compare-elim.c (find_comparisons_in_bb): Eliminate only compares
        having mode compatible with the mode of previous compare.  Substitute
        compare mode of previous compare with the mode, compatible
        with eliminated and previous compare.

2012-03-02  Peter Bergner  <bergner@vnet.ibm.com>

        * config/rs6000/dfp.md (floatdidd2): New define_insn.

2012-03-02  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (ix86_cc_modes_compatible): Declare CCZmode
        compatible with CCGOCmode and CCGCmode.

2012-03-02  Peter Bergner  <bergner@vnet.ibm.com>

        * config/rs6000/vsx.md (vsx_set_<mode>): Reorder operands.

2012-03-02  Ulrich Weigand  <ulrich.weigand@linaro.org>

        * config/arm/arm.c (arm_sat_operator_match): New function.
        * config/arm/arm-protos.h (arm_sat_operator_match): Add prototype.
        * config/arm/arm.md ("insn" attribute): Add "sat" value.
        ("SAT", "SATrev"): New code iterators.
        ("SATlo", "SAThi"): New code iterator attributes.
        ("*satsi_<SAT:code>"): New pattern.
        ("*satsi_<SAT:code>_shift"): Likewise.
        * config/arm/arm-fixed.md ("arm_ssatsihi_shift"): Add "insn"
        and "shift" attributes.
        ("arm_usatsihi"): Add "insn" attribute.
        * config/arm/predicates.md (sat_shift_operator): Allow multiplication
        by powers of two.  Do not allow shift by 32.

2012-03-02  Uros Bizjak  <ubizjak@gmail.com>

        PR target/46716
        * config/i386/i386.c (construct_container): Use gen_reg_or_parallel
        to pass the argument in the register of "natural" mode.

2012-03-02  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52406
        * tree-data-ref.h: Update documentation about DR_BASE_OBJECT.
        (struct indices): Add unconstrained_base member.
        (struct dr_alias): Remove unused vops member.
        (DR_UNCONSTRAINED_BASE): New define.
        * tree-data-ref.c (dr_analyze_indices): For COMPONENT_REFs
        add indices to allow their disambiguation.  Make DR_BASE_OBJECT
        be an artificial access that covers the whole indexed object,
        or mark it with DR_UNCONSTRAINED_BASE if we cannot do so.  Canonicalize
        plain decl base-objects to their MEM_REF variant.
        (dr_may_alias_p): When the base-object of either data reference
        has unknown size use only points-to information.
        (compute_affine_dependence): Make dumps easier to read and
        more verbose.
        * tree-vect-data-ref.c (vector_alignment_reachable_p): Use
        DR_REF when looking for packed references.
        (vect_supportable_dr_alignment): Likewise.

2012-03-02  Greta Yorsh  <Greta.Yorsh@arm.com>

        * config/arm/arm-ldmstm.ml (write_ldm_commutative_peephole):
        Improve conditions for peepholes of loads followed by commutative
        operators.
        * config/arm/ldmstm.md: Regenerated.

2012-03-02  Richard Guenther  <rguenther@suse.de>

        * BASE-VER: Set to 4.8.0.

2012-03-01  Richard Earnshaw  <rearnsha@arm.com>

        * config.gcc (obsolete): Add all ARM targets using the FPA.
        (with_fpu): Obsolete selection of the FPA or Maverick on ARM.
        * doc/install.texi: Avoid references to obsolete ARM ports.

2012-03-01  Joern Rennecke  <joern.rennecke@embecosm.com>

        * config/epiphany/epiphany.md (movmisalign<mode>): New patterns.

2012-03-01  Jeremy Bennett  <jeremy.bennett@embecosm.com>
            Joern Rennecke  <joern.rennecke@embecosm.com>

        * doc/extend.texi: Expand and update information on interrupt
        attribute for Epiphany.

2012-03-01  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh-protos.h: Update copyright notice dates.
        * config/sh/sh.h: Likewise.
        * config/sh/sh.md: Likewise.
        * config/sh/constraints.md: Likewise.
        * config/sh/predicates.md: Likewise.

2012-03-01  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh-protos.h (tertiary_reload_operand): Remove dead function.
        * config/sh/sh.c (tertiary_reload_operand): Likewise.

2012-03-01  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/constraints.md: Fix comment typo.

2012-03-01  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        PR target/52408
        * config/pa/pa.md (zvdep_imm32): Change type of variable x from int to
        unsigned HOST_WIDE_INT.
        (zvdep_imm64): Likewise.
        (vdepi_ior): Change type of variable x from int to HOST_WIDE_INT.
        (vdepi_and): Likewise.
        Likewise for unamed 64-bit patterns.
        * config/pa/predicates.md (lhs_lshift_cint_operand): Update comment.

2012-03-01  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/52001
        PR rtl-optimization/52417
        * cselib.c (cselib_any_perm_equivs): New variable.
        (cselib_reset_table): Check that it's not set when not
        preserving constants.
        (cselib_add_permanent_equiv): Set it.
        (cselib_have_permanent_equivalences): New.
        (cselib_init, cselib_finish): Reset it.
        * cselib.h (cselib_have_permanent_equivalences): Declare.
        * alias.c (get_addr): Restore earlier behavior when there
        aren't permanent equivalences.

2012-03-01  Steven Bosscher  <steven@gcc.gnu.org>

        * config/mn10300/mn10300-modes.def: Fix copyright notice.
        * config/v850/v850-modes.def: Fix copyright notice.

2012-03-01  Georg-Johann Lay  <avr@gjlay.de>

        * doc/extend.texi (AVR Built-in Functions): Document
        __builtin_avr_flash_segment.

        * config/avr/builtins.def (__builtin_avr_flash_segment): New entry.
        * config/avr/avr.md (flash_segment, flash_segment1): New expanders.
        (*split.flash_segment): New insn-and-split.
        * config/avr/avr.c (avr_init_builtins): Add local variables:
        const_memx_void_node, const_memx_ptr_type_node,
        char_ftype_const_memx_ptr.

2012-03-01  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/52445
        * tree-ssa-phiopt.c (struct name_to_bb): Remove ssa_name field,
        add ssa_name_ver, offset and size fields and change store field
        to bool.
        (name_to_bb_hash, name_to_bb_eq): Adjust for the above changes.
        (add_or_mark_expr): Likewise.  Only consider previous stores
        with the same size and offset.
        (nt_init_block): Only look at gimple_assign_single_p stmts,
        doesn't look at rhs2.

2012-03-01  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52443
        * tree-cfg.c (verify_gimple_assign_unary): Allow any
        conversions from integral types to pointer types.

2012-03-01  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr-c.c (avr_cpu_cpp_builtins): Restore built-in
        defines for __UINT24_MAX__, __INT24_MAX__, __INT24_MIN__
        unintentionally removed in r184616.

2012-03-01  Venkataramanan Kumar  <venkataramanan.kumar@amd.com>

        * doc/invoke.texi: Document AMD bdver2 and remove mentioning
        3DNow from bdver1.

2012-02-29  Jakub Jelinek  <jakub@redhat.com>
            Uros Bizjak  <ubizjak@gmail.com>

        PR target/52437
        * config/i386/sse.md (vec_set<mode>_0): Swap "*r" and "fF"
        alternatives, add "e" constraint to the new last alternative
        and ! to last 3 alternatives.

2012-02-29  Eric Botcazou  <ebotcazou@adacore.com>

        * dwarf2out.c (modified_type_die): Set DW_AT_GNAT_descriptive_type and
        DW_AT_artificial attributes at the end of the processing.
        (gen_array_type_die): Likewise.
        (gen_enumeration_type_die): Likewise.
        (gen_struct_or_union_type_die): Likewise.
        (add_gnat_descriptive_type_attribute): Do not suppress debug info for
        the parent type.

2012-02-29  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/52419
        * expr.c (expand_assignment): If doing misaligned store that doesn't
        cover all mode bits, perform a RMW cycle.

        PR tree-optimization/52429
        * tree-parloops.c (separate_decls_in_region_debug): Return early
        if var is LABEL_DECL.

2012-02-29  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

        PR tree-optimization/52424
        * tree-ssa-dom.c (dom_opt_leave_block): Push a marker before
        calling dom_thread_across_edge.

2012-02-29  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.c: Move definition of TARGET macros to end of file.

2012-02-29  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr-protos.h (avr_output_bld): Remove unused prototype.
        * config/avr/avr.c (avr_output_bld): Remove unused function.
        (avr_out_sbxx_branch): Use "%T" to print bit position.

2012-02-29  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.md: Untabify.

2012-02-29  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.md (eqne): New code iterator.
        (*dec-and-branchsi): Use it in text peephole's condition.
        (*dec-and-branchhi): Ditto.
        (*dec-and-branchqi): Ditto.

2012-02-29  Georg-Johann Lay  <avr@gjlay.de>

        PR target/49939
        * config/avr/avr.h (ASM_SPEC): Add -mno-skip-bug if we know that
        the device does not have the skip-bug.

2012-02-29  Oleg Endo  <olegendo@gcc.gnu.org>

        * doc/invoke.texi (-msoft-atomic): Add more detailed description.
        (-mbranch-cost, -mcbranchdi -mcmpeqdi -mfused-madd
        -mpretend-cmove): New.

2012-02-29  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/52397
        * df.h (struct df_d): Adjust comment that hard_regs_live_count
        doesn't count DEBUG_INSN refs.
        * df-scan.c (df_ref_create_structure): Don't set DF_HARD_REG_LIVE
        for DEBUG_INSN refs.

2012-02-28  Ulrich Weigand  <Ulrich.Weigand@de.ibm.com>

        Partially revert:

        2012-02-20  Richard Guenther  <rguenther@suse.de>
        PR tree-optimization/52298
        * tree-vect-stmts.c (vectorizable_load): Properly use
        STMT_VINFO_DR_STEP instead of DR_STEP when vectorizing outer loops.

2012-02-28  Aldy Hernandez  <aldyh@redhat.com>

        PR middle-end/51752
        * gimple.h (gimple_in_transaction): New.
        (gimple_set_in_transaction): New.
        (struct gimple_statement_base): Add in_transaction field.
        * tree-ssa-loop-im.c: (movement_possibility): Restrict movement of
        transaction loads.
        (tree_ssa_lim_initialize): Compute transaction bits.
        * tree.h (compute_transaction_bits): Protoize.
        * trans-mem.c (tm_region_init): Use the heap to store BB
        auxilliary data.
        (compute_transaction_bits): New.

2012-02-28  Bernhard Reutner-Fischer  <aldot@gcc.gnu.org>

        * gcc.c (display_help): Document --help=common and sort entries
        alphabetically.

2012-02-28  Bernhard Reutner-Fischer  <aldot@gcc.gnu.org>

        * doc/install.texi: Document check-$LANG specific shortcuts

2012-02-28  Matthew Gretton-Dann  <matthew.gretton-dann@arm.com>

        PR target/51534
        * config/arm/arm.c (neon_builtin_data): Add entries for vcgeu
        and vcgtu.
        * config/arm/arm_neon.h: Regenerate.
        * config/arm/neon.md (unspec): Add UNSPEC_VCGEU, and UNSPEC_VCGTU.
        (neon_vcgeu): New insn.
        (neon_vcgtu): Likewise.
        * config/arm/neon.ml (s_8_32, u_8_32): New lists.
        (ops): Unsigned comparison intrinsics call a different builtin.

2012-02-28  Richard Guenther  <rguenther@suse.de>

        PR target/52407
        * config/i386/i386.c (ix86_expand_vector_set): Fix element
        ordering for the VEC_CONCAT for two element vectors for
        V2SFmode, V2SImode and V2DImode.

2012-02-28  Richard Earnshaw  <rearnsha@arm.com>

        PR target/49448
        * config.gcc (arm*-*-linux*): Use an unambiguous pattern for
        detecting big-endian triplets.

2012-02-28  Richard Earnshaw  <rearnsha@arm.com>

        * arm.c (aapcs_vfp_is_call_or_return_candidate): Only use the machine
        mode if there is no type information available.

2012-02-28  Thomas Koenig  <tkoenig@gcc.gnu.org>

        PR tree-optimization/53207
        * doc/invoke.texi: Document as experimental and relying on graphite.

2012-02-28  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr-devices.c (avr_mcu_type): Adjust NULL part
        of initializer to changes from r184614.

2012-02-28  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52395
        * tree-sra.c (build_ref_for_offset): Also look at the base
        TYPE_ALIGN when figuring out the alignment of the replacement.

2012-02-28  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52402
        * ipa-prop.c (ipa_modify_call_arguments): Properly use
        mis-aligned types when creating the accesses at the call site.

2012-02-28  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/builtins.def: New file.
        * config/avr/t-avr (avr.o, avr-c.o): Depend on it.
        * config/avr/avr.c (enum avr_builtin_id): Use it.
        (avr_init_builtins): Use it. And use avr_bdesc.
        (bdesc_1arg): Remove.
        (bdesc_2arg): Remove.
        (bdesc_3arg): Remove.
        (struct avr_builtin_description): Add field n_args.
        (avr_bdesc): New static variable using builtins.def.
        (avr_expand_builtin): Use it.
        Don't call avr_expand_delay_cycles if op0 is not CONST_INT.
        (avr_fold_builtin): Fold AVR_BUILTIN_SWAP.
        Don't fold AVR_BUILTIN_INSERT_BITS if arg0 is not INTEGER_CST.

2012-02-28  Georg-Johann Lay  <avr@gjlay.de>

        PR target/52148
        * config/avr/avr.md (movmem_<mode>): Replace match_operand that
        match only one single hard register with respective hard reg rtx.
        (movmemx_<mode>): Ditto.
        * config/avr/avr.c (avr_emit_movmemhi): Adapt expanding to new
        insn anatomy of movmem[x]_<mode>.
        (avr_out_movmem): Same for printing assembler and operand usage.

2012-02-28  Georg-Johann Lay  <avr@gjlay.de>

        PR target/49868
        PR target/52261
        * doc/extend.texi (AVR Named Address Spaces): No more try to fix
        address spaces located outside of device flash.

        * config/avr/avr.h (base_arch_s): Remove field n_segments.
        (mcu_type_s): Add field n_flash.
        * config/avr/avr-devices.c (avr_arch_types): Remove .n_segments.
        Set .have_elpm and .have_elpmx to 1 for avrxmega4 and avrxmega5.
        (AVR_MCU): Add N_FLASH argument.
        * config/avr/avr-mcus.def (AVR_MCU): Add initializer for .n_flash.
        * config/avr/avr-c.c (avr_cpu_cpp_builtins): Only define built-in
        macro __FLASH<n> if that address space makes sense for the device.
        * config/avr/avr.c (avr_out_lpm): Don't try to fix address spaces
        outside of target flash.
        (avr_asm_named_section): Ditto.
        (avr_asm_select_section): Ditto.
        (avr_addr_space_convert): Ditto.
        (avr_emit_movmemhi): Ditto.
        (avr_nonconst_pointer_addrspace, avr_pgm_check_var_decl): Error if
        address space is outside of device flash.
        (avr_insert_attributes): Ditto.
        (avr_xload_libgcc_p): Use avr_current_device->n_flash instead of
        avr_current_arch->n_segments.

2012-02-27  H.J. Lu  <hongjiu.lu@intel.com>

        PR target/52352
        * config/i386/i386.md (*movabs<mode>_1): Enable only for TARGET_LP64.
        (*movabs<mode>_2): Likewise.

2012-02-27  Jakub Jelinek  <jakub@redhat.com>

        PR target/52375
        * config/arm/neon.md (vashr<mode>3, vlshr<mode>3): Use
        s_register_operand in the test instead of REG_P.  Don't call
        gen_reg_rtx if it won't be used.

        PR tree-optimization/52376
        * ipa-split.c (split_function): Ignore CLOBBER stmts.

2012-02-27  Stuart Henderson  <shenders@gcc.gnu.org>

        * ifcvt.c (noce_get_condition): Check condition variable is not
        small_register_classes_for_mode_p before accepting.

2012-02-27  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*movabs<mode>_1): Fix operand 1 constraints.

2012-02-27  Matthew Gretton-Dann  <matthew.gretton-dann@arm.com>

        Revert:
        2012-01-09  Matthew Gretton-Dann  <matthew.gretton-dann@arm.com>
        * config/arm/arm-cores.def (cortex-a15): Use cortex_a15_tune for
        tuning parameters.
        * config/arm/arm.c (arm_cortex_a15_tune): New static variable.

2012-02-27  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/sh.h: Delete dead GO_IF_LEGITIMATE_INDEX macro.

2012-02-26  Oleg Endo  <olegendo@gcc.gnu.org>

        * config/sh/predicates.md: Remove blank lines.
        * config/sh/sh.c: Fix typos in comments.
        * config/sh/constraints.md: Likewise.
        * config/sh/sh.md: Remove blank lines.
        Fix typos in comments.  Use ;; as comment characters.

2012-02-26  Walter Lee  <walt@tilera.com>

        * config/tilegx/tilegx.c (match_pcrel_step2): Fix instruction pattern.
        (replace_mov_pcrel_step2): Ditto.

2012-02-25  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/52001
        * alias.c (refs_newer_value_cb, refs_newer_value_p): New.
        (get_addr): Walk canonical value's locs.  Avoid returning VALUEs
        and locs that reference values newer than the non-canonical value
        at hand.  Return the canonical value as a worst case.
        (memrefs_conflict_p): Walk canonical value's locs.

        PR debug/52001
        * cselib.c (preserve_only_constants): Rename to...
        (preserve_constants_and_equivs): ... this.  Split out...
        (invariant_or_equiv_p): ... this.  Preserve plus expressions
        of other preserved expressions too.
        (cselib_reset_table): Adjust.
        * var-tracking.c (reverse_op): Use canonical value to build
        reverse operation.

2012-02-23  Kai Tietz  <ktietz@redhat.com>

        * config/i386/i386.c (ix86_delegitimize_address): Handle
        UNSPEC_PCREL plus displacement.

2012-02-24  Georg-Johann Lay  <avr@gjlay.de>

        PR target/52261
        * config/avr/avr.c (avr_out_movhi_mr_r_xmega): Use base
        to test for unusedness in st X addressing.

2012-02-24  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52361
        * gimple.c (walk_gimple_op): Use predicates with less redundant tests.
        (is_gimple_reg_type): Move inline ...
        * gimple.h (is_gimple_reg_type): ... here.

2012-02-24  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52361
        * passes.c (execute_function_todo): When verifying SSA form
        verify gimple form first.
        * tree-ssa.c (verify_ssa): Do not verify gimple form here.

2012-02-24  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52355
        * fold-const.c (fold_addr_of_array_ref_difference): New function.
        (fold_binary_loc): Use it to extend the existing &a[i] - &a[j] folding.

2012-02-13  Bernhard Reutner-Fischer  <aldot@gcc.gnu.org>

        * tree-if-conv (predicate_scalar_phi): Commentary typo fix.

2012-02-23  Bernhard Reutner-Fischer  <aldot@gcc.gnu.org>

        * tree-phinodes.c (make_phi_node): Mark static.
        * tree-flow.h (make_phi_node): Remove extern decl.
        * doc/gimple.texi (make_phi_node): Remove documentation.

2012-02-23  Bernhard Reutner-Fischer  <aldot@gcc.gnu.org>

        * tree-into-ssa (update_ssa): Avoid trailing whitespace in dump_file.
        * tree-ssa-sccvn.c (print_scc): Ditto.

2012-02-23  Bernhard Reutner-Fischer  <aldot@gcc.gnu.org>

        * doc/passes.texi (Full redundancy elimination): Fix typo.

2012-02-23  Bernhard Reutner-Fischer  <aldot@gcc.gnu.org>

        * doc/invoke.texi (-fdse, -fdce): Remove duplicate entries.

2012-02-23  Eric Botcazou  <ebotcazou@adacore.com>

        PR bootstrap/52287
        * haifa-sched.c (rank_for_schedule): Stabilize sort for debug insns.

2012-02-23  Uros Bizjak  <ubizjak@gmail.com>

        PR c/52290
        * c-decl.c (start_function): Exit early if decl1 is not FUNTION_DECL.

2012-02-23  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.md (code_stdname): Add ior, xor.
        (xior): New code iterator.
        (*<code_stdname><mode>qi.byte0): Use xior instead of ior.
        (*<code_stdname><mode>qi.byte1-3): Ditto.

2012-02-23  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/52019
        * ipa-split.c (find_return_bb, find_retval, visit_bb): Ignore
        CLOBBER stmts.

2012-02-23  Ulrich Weigand  <Ulrich.Weigand@de.ibm.com>

        * acinclude.m4: Use HAVE_INITFINI_ARRAY_SUPPORT instead of
        HAVE_INITFINI_ARRAY to work around namespace pollution in
        certain versions of newlib system headers.
        * config.in: Regenerate.
        * configure: Regenerate.
        * config/initfini-array.h: Use HAVE_INITFINI_ARRAY_SUPPORT
        instead of HAVE_INITFINI_ARRAY.

2012-02-22  Uros Bizjak  <ubizjak@gmail.com>

        PR target/52330
        * config/i386/i386.c (ix86_print_operand) <case 'H'>: Error out if x
        is not offsettable memory reference.

2012-02-22  Georg-Johann Lay  <avr@gjlay.de>

        PR target/18145
        * config/avr/avr.c (avr_asm_output_aligned_decl_common): Skip
        setting avr_need_clear_bss_p for __gnu_lto* symbols.

2012-02-22  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.h (avr_accumulate_outgoing_args): Return int.
        * config/avr/avr.c (avr_accumulate_outgoing_args): Return int.

2012-02-22  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * configure.ac (LIB_TLS_SPEC): Enforce use of alternate thread
        library on Solaris 8 even without TLS support.
        * configure: Regenerate.

2012-02-22  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52329
        * gimple-fold.c (fold_stmt_1): Also canonicalize ADDR_EXPRs
        for GIMPLE_DEBUG stmts.

2012-02-22  Martin Jambor  <mjambor@suse.cz>

        PR middle-end/51782
        * emit-rtl.c (set_mem_attributes_minus_bitpos): Set address space
        according to the base object.

2012-02-22  Georg-Johann Lay  <avr@gjlay.de>

        PR rtl-optimization/50063
        * config/avr/avr.md (movhi_sp_r): Handle -1 (unknown IRQ state)
        and 2 (8-bit SP) in operand 2.
        * config/avr/avr.c (avr_prologue_setup_frame): Adjust prologue
        setup to use movhi_sp_r instead of vanilla move to write SP.
        Adjust REG_CFA notes to superseed unspec.
        (expand_epilogue): Adjust epilogue setup to use movhi_sp_r instead
        of vanilla move.
        As function body might contain CLI or SEI: Use irq_state 0 (IRQ
        known to be off) only with TARGET_NO_INTERRUPTS. Never use
        irq_state 1 (IRQ known to be on) here.

2012-02-21  Bernd Schmidt  <bernds@codesourcery.com>

        * ira.c (check_allocation): Use REG_WORDS_BIG_ENDIAN, not
        WORDS_BIG_ENDIAN.
        * ira-color.c (setup_profitable_hard_regs, check_hard_reg_p,
        assign_hard_reg): Likewise.

2012-02-21  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.md (neghi2): Remove "!d,0" alternative. Tweak "r,0".

2012-02-21  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.md
        (*dec-and-branchhi!=-1.d.clobber): New text peephole.
        (*dec-and-branchhi!=-1.l.clobber): New text peephole.

2012-02-21  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr-protos.h (avr_accumulate_outgoing_args): Move
        prototype from here to...
        * config/avr/avr.h: ...here.

2012-02-21  Richard Earnshaw  <rearnsha@arm.com>

        PR target/52294
        * thumb2.md (thumb2_shiftsi3_short): Split register and
        immediate shifts.  For register shifts tie operands 0 and 1.
        (peephole2 for above): Check that register-controlled shifts
        have suitably tied operands.

2012-02-21  Quentin Neill  <quentin.neill@amd.com>

        PR target/52137
        * config/i386/bdver1.md (bdver1_call, bdver1_push,
        bdver1_pop, bdver1_leave, bdver1_lea, bdver1_imul_DI, bdver1_imul,
        bdver1_imul_mem_DI, bdver1_imul_mem, bdver1_idiv, bdver1_idiv_mem,
        bdver1_str, bdver1_idirect, bdver1_ivector, bdver1_idirect_loadmov,
        bdver1_idirect_load, bdver1_ivector_load, bdver1_idirect_movstore,
        bdver1_idirect_both, bdver1_ivector_both, bdver1_idirect_store,
        bdver1_ivector_store, bdver1_fldxf, bdver1_fld, bdver1_fstxf,
        bdver1_fst, bdver1_fist, bdver1_fmov_bdver1, bdver1_fadd_load,
        bdver1_fadd, bdver1_fmul_load, bdver1_fmul, bdver1_fsgn,
        bdver1_fdiv_load, bdver1_fdiv, bdver1_fpspc_load, bdver1_fpspc,
        bdver1_fcmov_load, bdver1_fcmov, bdver1_fcomi_load,
        bdver1_fcomi, bdver1_fcom_load, bdver1_fcom,
        bdver1_fxch, bdver1_ssevector_avx128_unaligned_load,
        bdver1_ssevector_avx256_unaligned_load,
        bdver1_ssevector_sse128_unaligned_load,
        bdver1_ssevector_avx128_load, bdver1_ssevector_avx256_load,
        bdver1_ssevector_sse128_load, bdver1_ssescalar_movq_load,
        bdver1_ssescalar_vmovss_load, bdver1_ssescalar_sse128_load,
        bdver1_mmxsse_load, bdver1_sse_store_avx256, bdver1_sse_store,
        bdver1_mmxsse_store_short, bdver1_ssevector_avx256,
        bdver1_movss_movsd, bdver1_mmxssemov, bdver1_sselog_load_256,
        bdver1_sselog_256, bdver1_sselog_load, bdver1_sselog,
        bdver1_ssecmp_load, bdver1_ssecmp, bdver1_ssecomi_load,
        bdver1_ssecomi, bdver1_vcvtX2Y_avx256_load, bdver1_vcvtX2Y_avx256,
        bdver1_ssecvt_cvtss2sd_load, bdver1_ssecvt_cvtss2sd,
        bdver1_sseicvt_cvtsi2sd_load, bdver1_sseicvt_cvtsi2sd,
        bdver1_ssecvt_cvtpd2ps_load, bdver1_ssecvt_cvtpd2ps,
        bdver1_ssecvt_cvtdq2ps_load, bdver1_ssecvt_cvtdq2ps,
        bdver1_ssecvt_cvtdq2pd_load, bdver1_ssecvt_cvtdq2pd,
        bdver1_ssecvt_cvtps2pd_load, bdver1_ssecvt_cvtps2pd,
        bdver1_ssecvt_cvtsX2si_load, bdver1_ssecvt_cvtsX2si,
        bdver1_ssecvt_cvtpd2pi_load, bdver1_ssecvt_cvtpd2pi,
        bdver1_ssecvt_cvtpd2dq_load, bdver1_ssecvt_cvtpd2dq,
        bdver1_ssecvt_cvtps2pi_load, bdver1_ssecvt_cvtps2pi,
        bdver1_ssemuladd_load_256, bdver1_ssemuladd_256,
        bdver1_ssemuladd_load, bdver1_ssemuladd, bdver1_sseimul_load,
        bdver1_sseimul, bdver1_sseiadd_load, bdver1_sseiadd,
        bdver1_ssediv_double_load_256, bdver1_ssediv_double_256,
        bdver1_ssediv_single_load_256, bdver1_ssediv_single_256,
        bdver1_ssediv_double_load, bdver1_ssediv_double,
        bdver1_ssediv_single_load, bdver1_ssediv_single, bdver1_sseins):
        Add "bdver2" attribute.

2012-02-21  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * config/s390/s390.c (s390_option_override): Make -mhard-dfp the
        default if possible and not specified otherwise.

2012-02-21  Richard Guenther  <rguenther@suse.de>

        PR middle-end/52314
        * gimplify.c (create_tmp_from_val): Use the main variant type
        for the type of the temporary we create.

2012-02-21  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52324
        * gimplify.c (gimplify_expr): When re-gimplifying expressions
        do not gimplify a MEM_REF address operand if it is already
        in suitable form.

2012-02-21  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * config/s390/s390.md ("fixuns_trunc<mode>si2"): Replace
        TARGET_HARD_FLOAT with TARGET_HARD_DFP.

2012-02-21  Richard Guenther  <rguenther@suse.de>

        * tree-vect-stmts.c (vectorizable_load): Use pre-computed
        nested_in_vect_loop.

2012-02-21  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/52318
        * gimple-fold.c (gimplify_and_update_call_from_tree): Add
        vdef also to non-pure/const call stmts in the sequence.

2012-02-21  Tristan Gingold  <gingold@adacore.com>

        * config/vms/vms-ld.c (main): Fix IDENTIFICATION padding.

2012-02-20  David S. Miller  <davem@davemloft.net>

        * config/sparc/sparc.md (load_pcrel_sym<P:mode>): Explain why we
        don't use the "rd %pc" instruction on v9 for PIC register loads.

2012-02-20  Aldy Hernandez  <aldyh@redhat.com>

        PR middle-end/52141
        * trans-mem.c (ipa_tm_scan_irr_block): Error out on GIMPLE_ASM's
        in a transaction safe function.

2012-02-20  Kai Tietz  <ktietz@redhat.com>

        PR target/52238
        * stor-layout.c (place_field): Handle desired_align for
        ms-bitfields, too.

2012-02-20  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52298
        * tree-vect-stmts.c (vectorizable_store): Properly use
        STMT_VINFO_DR_STEP instead of DR_STEP when vectorizing
        outer loops.
        (vectorizable_load): Likewise.
        * tree-vect-data-refs.c (vect_analyze_data_ref_access):
        Access DR_STEP after ensuring it is not NULL.

2012-02-20  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/52286
        * fold-const.c (fold_binary_loc): For (X & C1) | C2
        optimization use double_int_to_tree instead of build_int_cst_wide,
        rewrite to use double_int vars.

2012-02-20  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        PR target/50166
        * acinclude.m4 (gcc_AC_INITFINI_ARRAY): Require gcc_SUN_LD_VERSION.
        Define _start.
        Remove -e 0 from $gcc_cv_ld invocation.
        Only use __GLIBC_PREREQ if defined.
        Enable on Solaris since Solaris 8 patch.
        (gcc_SUN_LD_VERSION): New macro.
        * configure.ac (ld_ver) <*-*-solaris2*>: Refer to
        gcc_SUN_LD_VERSION for version number format.
        * configure: Regenerate.
        * varasm.c (get_elf_initfini_array_priority_section): Set
        SECTION_NOTYPE for non-default priority.
        Use get_section instead of get_unnamed_section to emit
        .init_array/.fini_array with default priority.

2012-02-19  Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/mips.c (mips_need_mips16_rdhwr_p): New variable.
        (mips_get_tp): Set it.  Record that __mips16_rdhwr binds locally.
        (mips_start_unique_function, mips_output_mips16_rdhwr)
        (mips_code_end): New functions.
        (TARGET_ASM_CODE_END): Define.

2012-02-19  Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/mips.c (mips16_build_call_stub): Add CFI information
        to stubs with non-sibling calls.

2012-02-18  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/invoke.texi (-fira-* options): Copy-edit.
        (ira-* parameters): Copy-edit.

2012-02-17  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/invoke.texi: Minor copy-edits to bring into conformance with
        GCC coding conventions.

2012-02-17  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/invoke.texi: Consistently hyphenate "big-endian"/"little-endian"
        when used as adjectives.

2012-02-16  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/invoke.texi: Clean up "that"/"which" confusion.

2012-02-17  Steven Bosscher  <steven@gcc.gnu.org>

        * system.h: Poison SMALL_REGISTER_CLASSES
        * config/rl78/rl78.h: Replace SMALL_REGISTER_CLASSES with hook.
        * config/rx/rx.h: Remove SMALL_REGISTER_CLASSES.

2012-02-16  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/52285
        * tree-tailcall.c (find_tail_calls): Ignore gimple_clobber_p stmts
        when deciding if a call is a tail call or tail recursion.

2012-02-16  Kai Tietz  <ktietz@redhat.com>

        * config/i386/i386.c (legitimate_pic_address_disp_p): Allow
        interger-constant displacement for UNSPEC_PCREL.

2012-02-16  Jakub Jelinek  <jakub@redhat.com>

        PR rtl-optimization/52208
        * ira-costs.c (scan_one_insn): Don't decrease mem_cost
        for MEMs with REG_EQUIV, if the MEM isn't general_operand.

        PR tree-optimization/52255
        * tree-vect-loop-manip.c (slpeel_tree_peel_loop_to_edge): If
        loop->header has virtual PHI, but exit_e->dest doesn't, add
        virtual PHI to exit_e->dest and adjust all uses after the loop.

        PR debug/52260
        * dwarf2out.c (copy_decls_walk): Fill in *slot before traversing
        children with clone_tree_hash, not after it.

2012-02-16  Iain Sandoe  <iains@gcc.gnu.org>

        * config/darwin.h (ASM_OUTPUT_LABELREF): Add user label prefix for
        extended identifiers.

2012-02-16  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/51929
        * cgraphunit.c (verify_edge_corresponds_to_fndecl): If node is
        a same_body_alias, also test whether e->callee isn't a former
        or current clone of the decl this is a same body alias of.

        PR translation/52264
        * cgraphunit.c (verify_cgraph_node): Fix a typo.

2012-02-15  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/invoke.texi: Clean up "n-bit/byte/word" modifiers.

2012-02-15  Michael Meissner  <meissner@linux.vnet.ibm.com>

        PR target/52199
        * config/rs6000/rs6000.c (rs6000_expand_vector_init): Use
        force_reg instead of copy_to_reg for better optimization.  Force
        non-register or memory operands into a register.

2012-02-15  Andrew MacLeod  <amacleod@redhat.com>

        * extend.texi: Reserve upper bits of memory model for future use.

2012-01-15  Georg-Johann Lay  <avr@gjlay.de>
            Anatoly Sokolov <aesok@post.ru>
            Eric Weddington <eric.weddington@atmel.com>

        PR target/52261
        * config/avr/avr-devices.c (avr_arch_types): Add avrxmega2,
        avrxmega4, avrxmega5, avrxmega6, avrxmega7.
        Rewrite initializers for .macro.
        * config/avr/avr-mcus.def (AVR_MCU): Add known MCUs:
        avrxmega2: atxmega16a4, atxmega16d4, atxmega16x1, atxmega32a4
        atxmega32d4, atxmega32x1.
        avrxmega4: atxmega64a3, atxmega64d3.
        avrxmega5: atxmega64a1, atxmega64a1u.
        avrxmega6: atxmega128a3, atxmega128d3, atxmega192a3, atxmega192d3,
        atxmega256a3, atxmega256a3b, atxmega256a3bu, atxmega256d3.
        avrxmega7: atxmega128a1, atxmega128a1u.
        * config/avr/avr.h (enum avr_arch): Add: ARCH_AVRXMEGA2,
        ARCH_AVRXMEGA4, ARCH_AVRXMEGA5, ARCH_AVRXMEGA6, ARCH_AVRXMEGA7.
        (struct base_arch_s): Rename reserved to xmega_p.
        Rename reserved2 to have_rampd.
        (AVR_XMEGA): New define.
        (AVR_HAVE_RAMPD, AVR_HAVE_RAMPX, AVR_HAVE_RAMPY): New defines.
        (AVR_HAVE_RAMPZ): Change definition to fit xmega.
        * config/avr/predicates.md (io_address_operand): Take into
        account SFR offset.
        (low_io_address_operand): Ditto.
        (high_io_address_operand): Ditto.
        * config/avr/avr.md (isa): Add alternatives no_xmega, xmega.
        (enabled, movhi_sp_r): Use them.
        * config/avr/avr-c.c (avr_cpu_cpp_builtins): Use
        cpp_define_formatted to built-in define __AVR_ARCH__.
        (__AVR_XMEGA__): New built-in define.
        (__AVR_HAVE_RAMPD__): New built-in define.
        (__AVR_HAVE_RAMPX__): New built-in define.
        (__AVR_HAVE_RAMPY__): New built-in define.
        (__AVR_HAVE_RAMPZ__): Change condition when to built-in define it.

        * config/avr/avr.c (avr_addr_t): Add ccp, rampd, rampx, rampy.
        (avr_option_override): Initialize them.
        (sreg_rtx, rampd_rtx, rampx_rtx, rampy_rtx): New GTY rtx.
        (avr_init_expanders): Initialize them. No more block several calls.
        (emit_push_sfr): New static function.
        (avr_prologue_setup_frame): Use it to push SREG, RAMPD/X/Y/Z as needed.
        Handle AVR_XMEGA.
        (expand_epilogue): Handle AVR_XMEGA. Pop RAMPD/X/Y/Z as needed.
        (avr_print_operand): Print addreeses as symbols for
        RAMPX, RAMPY, RAMPD, CCP.
        (output_movhi): Handle AVR_XMEGA when writing to SP.
        (avr_out_movhi_mr_r_xmega): New static function.
        (out_movhi_mr_r): Forward to avr_out_movhi_mr_r_xmega for AVR_XMEGA.
        (avr_file_start): Print symbol defines for __RAMPX__,  __RAMPY__,
        __RAMPD__,  __CCP__ as needed.

        * config/avr/multilib.h: Regenerate.
        * config/avr/t-multilib: Regenerate.
        * config/avr/avr-tables.opt: Regenerate.

2012-02-15  Tobias Grosser <grosser@fim.uni-passau.de>

        PR tree-optimization/50561
        * graphite-flattening.c (lst_project_loop): Do not
        remove old scattering dimensions after flattening.
        (lst_do_flatten): Likewise.

2012-02-15  Georg-Johann Lay  <avr@gjlay.de>

        * doc/extend.texi (AVR Built-in Functions): Remove doc for
        __builtin_avr_map8, __builtin_avr_map16.
        Document __builtin_avr_insert_bits.

        * config/avr/avr.md (map_bitsqi, map_bitshi): Remove.
        (insert_bits): New insn.
        (adjust_len.map_bits): Rename to insert_bits.
        (UNSPEC_MAP_BITS): Rename to UNSPEC_INSERT_BITS.
        * avr-protos.h (avr_out_map_bits): Remove.
        (avr_out_insert_bits, avr_has_nibble_0xf): New.
        * config/avr/constraints.md (Cxf,C0f): New.
        * config/avr/avr.c (avr_cpu_cpp_builtins): Remove built-in
        defines __BUILTIN_AVR_MAP8, __BUILTIN_AVR_MAP16.
        New built-in define __BUILTIN_AVR_INSERT_BITS.
        * config/avr/avr.c (TARGET_FOLD_BUILTIN): New define.
        (enum avr_builtin_id): Add AVR_BUILTIN_INSERT_BITS.
        (avr_move_bits): Rewrite.
        (avr_fold_builtin, avr_map_metric, avr_map_decompose): New static
        functions.
        (avr_map_op_t): New typedef.
        (avr_map_op): New static variable.
        (avr_out_insert_bits, avr_has_nibble_0xf): New functions.
        (adjust_insn_length): Handle ADJUST_LEN_INSERT_BITS.
        (avr_init_builtins): Add definition for __builtin_avr_insert_bits.
        (bdesc_3arg, avr_expand_triop_builtin): New.
        (avr_expand_builtin): Use them. And handle AVR_BUILTIN_INSERT_BITS.
        (avr_revert_map, avr_swap_map, avr_id_map, avr_sig_map): Remove.
        (avr_map_hamming_byte, avr_map_hamming_nonstrict): Remove.
        (avr_map_equal_p, avr_map_sig_p): Remove.
        (avr_out_swap_bits, avr_out_revert_bits, avr_out_map_bits): Remove.
        (bdesc_2arg): Remove AVR_BUILTIN_MAP8, AVR_BUILTIN_MAP16.
        (adjust_insn_length): Remove handling for ADJUST_LEN_MAP_BITS.
        (enum avr_builtin_id): Remove AVR_BUILTIN_MAP8, AVR_BUILTIN_MAP16.
        (avr_init_builtins): Remove __builtin_avr_map8, __builtin_avr_map16.
        (avr_expand_builtin): Remove AVR_BUILTIN_MAP8, AVR_BUILTIN_MAP16.

2012-02-14  Bernd Schmidt  <bernds@codesourcery.com>

        * config/c6x/c6x.md (reserve_cycles): New attribute.
        * config/c6x/c6x.c (c6x_sched_reorder_1): Ensure insns we predicate
        don't reserve functional units after the branch occurs.

2012-02-14  Aldy Hernandez  <aldyh@redhat.com>

        PR middle-end/52142
        * ipa-inline.c (can_inline_edge_p): Do not inline tm_pure
        functions into non-tm_pure functions.

2012-02-14  Eric Botcazou  <ebotcazou@adacore.com>

        PR lto/52178
        * gimple.c (iterative_hash_gimple_type): Use RECORD_OR_UNION_TYPE_P.
        (iterative_hash_canonical_type): Likewise.
        * tree-ssa-pre.c (fini_pre): Clean up the CFG only after purging all
        the dead edges.

2012-02-14  Bernd Schmidt  <bernds@codesourcery.com>

        * haifa-sched.c (prune_ready_list): Ensure that if there is a
        sched-group insn, it either remains alone or the entire list is pruned.

2012-02-14  Jonathan Wakely  <jwakely.gcc@gmail.com>

        * doc/install.texi (Prerequisites): Fix grammar.
        (Configuration): Likewise.

2012-02-14  Jonathan Wakely  <jwakely.gcc@gmail.com>

        * doc/install.texi (Prerequisites): Suggest building GMP, MPFR and
        MPC as part of GCC before describing configuring with --with-gmp etc.
        (Installing GCC: Configuration): --with-gmp etc. aren't needed if
        sources are present.

2012-02-14  Jakub Jelinek  <jakub@redhat.com>

        PR debug/51950
        * dwarf2out.c (clone_tree_hash): New function.
        (copy_decls_walk): Use it instead of clone_tree.

2012-02-14  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52244
        PR tree-optimization/51528
        * tree-sra.c (analyze_access_subtree): Only create INTEGER_TYPE
        replacements for integral types.

2012-02-14  Walter Lee  <walt@tilera.com>

        * config.gcc: Handle tilegx and tilepro.
        * configure.ac (gcc_cv_as_dwarf2_debug_line): Enable test for
        tilegx and tilepro.
        Add HAVE_AS_TLS check for tilegx and tilepro.
        * configure: Regenerate.
        * doc/contrib.texi: Add Mat Hostetter and self.
        * doc/extend.texi (TILE-Gx Built-in Functions): New node.
        Document instruction intrinsics and network accessing intrinsics.
        (TILEPro Built-in Functions): New node.  Document instruction
        intrinsics and network accessing intrinsics.
        * doc/install.texi (Specific, tilegx-*-linux*): Document it.
        (Specific, tilepro-*-linux*): Likewise.
        * doc/invoke.texi (TILE-Gx Options): New section.
        (TILEPro Options): New section.
        * doc/md.texi (TILE-Gx): New section.
        (TILEPro): New section.
        * common/config/tilegx/tilegx-common.c: New file.
        * common/config/tilepro/tilepro-common.c: New file.
        * config/tilegx/constraints.md: New file.
        * config/tilegx/linux.h: New file.
        * config/tilegx/mul-tables.c: New file.
        * config/tilegx/predicates.md: New file.
        * config/tilegx/sync.md: New file.
        * config/tilegx/t-tilegx: New file.
        * config/tilegx/tilegx-builtins.h: New file.
        * config/tilegx/tilegx-c.c: New file.
        * config/tilegx/tilegx-generic.md: New file.
        * config/tilegx/tilegx-modes.def: New file.
        * config/tilegx/tilegx-multiply.h: New file.
        * config/tilegx/tilegx-protos.h: New file.
        * config/tilegx/tilegx.c: New file.
        * config/tilegx/tilegx.h: New file.
        * config/tilegx/tilegx.md: New file.
        * config/tilegx/tilegx.opt: New file.
        * config/tilepro/constraints.md: New file.
        * config/tilepro/gen-mul-tables.cc: New file.
        * config/tilepro/linux.h: New file.
        * config/tilepro/mul-tables.c: New file.
        * config/tilepro/predicates.md: New file.
        * config/tilepro/t-tilepro: New file.
        * config/tilepro/tilepro-builtins.h: New file.
        * config/tilepro/tilepro-c.c: New file.
        * config/tilepro/tilepro-generic.md: New file.
        * config/tilepro/tilepro-modes.def: New file.
        * config/tilepro/tilepro-multiply.h: New file.
        * config/tilepro/tilepro-protos.h: New file.
        * config/tilepro/tilepro.c: New file.
        * config/tilepro/tilepro.h: New file.
        * config/tilepro/tilepro.md: New file.
        * config/tilepro/tilepro.opt: New file.

2012-02-14  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/52210
        * tree-vect-slp.c (vect_get_and_check_slp_defs): Call
        vect_model_simple_cost with two entry vect_def_type array instead
        of an address of dt.

2012-02-14  Richard Guenther  <rguenther@suse.de>

        PR lto/52178
        * tree-streamer-in.c (lto_input_ts_field_decl_tree_pointers):
        Do not stream DECL_QUALIFIER.
        * tree-streamer-out.c (write_ts_field_decl_tree_pointers): Likewise.
        * tree.c (free_lang_data_in_decl): Free DECL_QUALIFIER.
        (find_decls_types_r): Do not walk DECL_QUALIFIER.

2012-02-14  Jakub Jelinek  <jakub@redhat.com>

        PR c/52181
        * c-decl.c (merge_decls): Copy DECL_USER_ALIGN bit from olddecl to
        newdecl.

2012-02-13  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/52172
        * cselib.h (cselib_subst_to_values_from_insn): New prototype.
        * cselib.c (cselib_subst_to_values_from_insn): New function.
        * sched-deps.c (add_insn_mem_dependence,
        sched_analyze_1, sched_analyze_2): Use it.

2012-02-13  Jan Hubicka  <jh@suse.cz>

        PR middle-end/52214
        * predict.c (predict_paths_for_bb): Fix thinko in prevoius patch.

2012-02-13  Eric Botcazou  <ebotcazou@adacore.com>

        * gcc.c (LINK_COMMAND_SPEC): Deal with -fgnu-tm.
        (GTM_SELF_SPECS): Define if not already defined.
        (driver_self_specs): Add GTM_SELF_SPECS.
        * config/darwin.h (LINK_COMMAND_SPEC_A): Deal with -fgnu-tm.
        (GTM_SELF_SPECS): Define.
        * config/i386/cygwin.h (GTM_SELF_SPECS): Likewise.
        * config/i386/mingw32.h (GTM_SELF_SPECS): Likewise.

2012-02-13  Jakub Jelinek  <jakub@redhat.com>

        * cselib.c (expand_loc): Return sp, fp, hfp or cfa base reg right
        away if seen.

        * cselib.c (dump_cselib_val): Don't assume l->setting_insn is non-NULL.

        PR middle-end/52230
        * omp-low.c (expand_omp_for): If a static schedule without chunk size
        has NULL region->cont, force fd.chunk_size to be integer_zero_node.

2012-02-13  Andrew MacLeod  <amacleod@redhat.com>

        PR c/52190
        * doc/extend.texi : Fix another __atomic_compare_exchange typo.

2012-02-13  Richard Guenther  <rguenther@suse.de>

        PR translation/52211
        * passes.c (enable_disable_pass): Fix typo.

2012-02-13  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/52209
        * expr.c (expand_expr_real_2) <case BIT_NOT_EXPR>: Only expand using
        XOR for reduce_bit_field if type is unsigned.

2012-02-12  Eric Botcazou  <ebotcazou@adacore.com>

        * config/sparc/sparc.h (CANNOT_CHANGE_MODE_CLASS): In 64-bit mode,
        disallow changes from SFmode to mode with different size in FP regs.

2012-02-12  Robert Millan  <rmh@gnu.org>
            Gerald Pfeifer <gerald@pfeifer.com>

        * ginclude/stddef.h [__FreeBSD_kernel__] (__size_t): Do not define.
        Tweak comment.

2012-02-11  Richard Sandiford  <rdsandiford@googlemail.com>

        PR rtl-optimization/52175
        * reorg.c (fill_slots_from_thread): Don't apply add/sub optimization
        to frame-related instructions.

2012-02-10  Jason Merrill  <jason@redhat.com>

        PR c++/51910
        * tlink.c (demangled_hash_entry): Change mangled to a VEC.
        (demangle_new_symbols): Fill it.
        (scan_linker_output): Walk it.
        (start_tweaking): Split out from scan_linker_output.
        (maybe_tweak): Update sym->chosen.
        * Makefile.in (COLLECT2_OBJS): Add vec.o and gcc-none.o

2012-02-11  Jakub Jelinek  <jakub@redhat.com>

        PR debug/52132
        * reg-stack.c (subst_stack_regs_in_debug_insn): Don't use get_true_reg.

2012-02-11  Uros Bizjak  <ubizjak@gmail.com>

        * compare-elim.c (find_comparisons_in_bb): Eliminate only compares
        having the same mode as previous compare.

2012-02-10  Eric Botcazou  <ebotcazou@adacore.com>

        * config/sparc/sparc.c (sparc_flat_expand_prologue): Use emit_use.
        * config/sparc/sparc.md (UNSPECV_GOTO): Delete.
        (nonlocal_goto_internal): Likewise.
        (nonlocal_goto): Emit a use and an indirect jump directly.

2012-02-10  Andrew MacLeod  <amacleod@redhat.com>

        PR c/52190
        * doc/extend.texi : Update comments for __atomic_compare_exchange and
        __atomic_{is,always}_lock_free.

2012-02-10  Uros Bizjak  <ubizjak@gmail.com>

        PR target/52146
        * config/i386/i386.c (ix86_legitimate_address_p): Disallow
        negative constant address for TARGET_X32.

2012-02-10  Richard Henderson  <rth@redhat.com>

        * tree-ssa-dce.c (propagate_necessity): Handle GIMPLE_TRANSACTION.
        * tree-ssa-operands.c (parse_ssa_operands): Add virtual operands
        for GIMPLE_TRANSACTION.  Tidy if's into a switch.

2012-02-10  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>
            Ira Rosen  <irar@il.ibm.com>

        PR tree-optimization/50031
        * targhooks.c (default_builtin_vectorization_cost): Handle
        vec_promote_demote.
        * target.h (enum vect_cost_for_stmt): Add vec_promote_demote.
        * tree-vect-loop.c (vect_get_single_scalar_iteraion_cost): Handle
        all types of reduction and pattern statements.
        (vect_estimate_min_profitable_iters): Likewise.
        * tree-vect-stmts.c (vect_model_promotion_demotion_cost): New function.
        (vect_get_load_cost): Use vec_perm for permutations; add dump logic
        for explicit realigns.
        (vectorizable_conversion): Call vect_model_promotion_demotion_cost.
        * config/spu/spu.c (spu_builtin_vectorization_cost): Handle
        vec_promote_demote.
        * config/i386/i386.c (ix86_builtin_vectorization_cost): Likewise.
        * config/rs6000/rs6000.c (rs6000_builtin_vectorization_cost): Update
        vec_perm for VSX and handle vec_promote_demote.

2012-02-10  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/52177
        * builtins.c (fold_builtin_atomic_always_lock_free,
        expand_builtin_atomic_always_lock_free,
        fold_builtin_atomic_is_lock_free, expand_builtin_atomic_is_lock_free):
        Return and/or test boolean_true_node/boolean_false_node instead of
        integer_one_node/integer_zero_node.

2012-02-10  Jan Hubicka  <jh@suse.cz>

        PR middle-end/48600
        * predict.c (predict_paths_for_bb): Prevent looping.
        (predict_paths_leading_to_edge, predict_paths_leading_to): Update.

2012-02-10  Roman Zhuykov  <zhroma@ispras.ru>

        * config/arm/arm.c (output_move_double): In one case properly
        count number of instructions that will be emitted.

2012-02-10  Richard Guenther  <rguenther@suse.de>

        PR translation/52193
        * cgraphunit.c (cgraph_mark_functions_to_output): Fix typo.

2012-02-09  Peter Bergner  <bergner@vnet.ibm.com>

        PR middle-end/52140
        * dojump.c (do_compare_rtx_and_jump): Use SCALAR_FLOAT_MODE_P.

2012-02-09  Jakub Jelinek  <jakub@redhat.com>

        PR debug/52165
        * var-tracking.c (emit_note_insn_var_location): If
        EMIT_NOTE_BEFORE_INSN and insn is NOTE_INSN_CALL_ARG_LOCATION,
        emit it before next non-NOTE_INSN_CALL_ARG_LOCATION
        non-NOTE_DURING_CALL_P insn.

2012-02-09  Bin Cheng  <bin.cheng@arm.com>

        PR middle-end/51867
        * builtins.c (expand_builtin): Don't check DECL_ASSEMBLER_NAME_SET_P.

2012-02-08  Magnus Granberg  <zorry@gentoo.org>

        PR driver/48524
        * gcc.c (switch_matches) Support switches with separated form,
        -D and -U.

2012-02-08  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.md (SREG_ADDR): Remove constant definition.
        (SP_ADDR): Ditto.
        (RAMPZ_ADDR): Ditto.
        * config/avr/avr.c (avr_addr_t): New typedef.
        (avr_addr): New struct to hold RAM address of SPL, SPH, RAMPZ, SREG.
        (avr_init_expanders): Initialize it.
        (expand_prologue): Use avr_addr instead of RAMPZ_ADDR, SP_ADDR,
        SREG_ADDR.
        (expand_epilogue): Ditto.
        (avr_print_operand): Ditto.
        (avr_file_start): Ditto.
        (avr_emit_movmemhi): Ditto.

2012-02-08  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/46886
        * tree-flow.h (do_while_loop_p): Declare.
        * tree-ssa-loop-ch.c (do_while_loop_p): Export.
        * tree-parloops.c (parallelize_loops): Only parallelize do-while loops.

2012-02-08  Andrew MacLeod  <amacleod@redhat.com>

        * optabs.c (expand_atomic_load): Do not assume compare_and_swap will
        always succeed for integers larger than a native word.

2012-02-08  Richard Guenther  <rguenther@suse.de>

        PR rtl-optimization/52170
        * simplify-rtx.c (simplify_plus_minus): Use CONSTM1_RTX to
        properly handle integer vector modes.

2012-02-08  Jakub Jelinek  <jakub@redhat.com>

        PR gcov-profile/52150
        * coverage.c: Include target.h.
        (build_var): Call targetm.strip_name_encoding on the assembler name.
        Change one _ into . or $ if the target allows it.
        * Makefile.in (coverage.o): Depend on $(TARGET_H).

        PR rtl-optimization/52139
        * cfgrtl.c (cfg_layout_merge_blocks): If BB_END
        is a BARRIER after emit_insn_after_noloc, move BB_END
        to the last non-BARRIER insn before it.

2012-02-07  Richard Sandiford  <rdsandiford@googlemail.com>

        PR middle-end/24306
        * config/mips/mips.c (mips_std_gimplify_va_arg_expr): New function.
        (mips_gimplify_va_arg_expr): Call it instead of
        std_gimplify_va_arg_expr.

2012-02-07  Michael Meissner  <meissner@linux.vnet.ibm.com>

        * config/rs6000/rs6000.c (rs6000_trampoline_init): Fix error
        message for -mno-pointers-to-nested-function.

2012-02-07  Eric Botcazou  <ebotcazou@adacore.com>

        PR middle-end/51994
        * expr.c (get_inner_reference): If there is an offset, add a negative
        bit position to it (if any).

2012-02-07  Jakub Jelinek  <jakub@redhat.com>

        PR rtl-optimization/52060
        * combine.c (try_combine): Add i0src_copy and i0src_copy2 variables,
        copy i1src to i1src_copy whenever added_sets_2 && i1_feeds_i2_n already
        before i1dest -> i1src substitution in newpat, copy i0src to i0src_copy
        and/or i0src_copy2 when needed.

2012-02-07  Jakub Jelinek  <jakub@redhat.com>

        * gcc.c (main): Don't look for lto-wrapper or lto-wrapper
        or LTOPLUGINSONAME if have_c.

        * config/freebsd-spec.h: Add comment about what macros can be defined
        in this header.
        (LINK_EH_SPEC, LINK_SSP_SPEC, USE_LD_AS_NEEDED): Don't define here.
        * config/freebsd.h (LINK_EH_SPEC, LINK_SSP_SPEC, USE_LD_AS_NEEDED): But
        here instead.

2012-02-07  Richard Guenther  <rguenther@suse.de>

        * gimple-pretty-print.c (dump_gimple_phi): Avoid excessive
        newline in -alias dumps.

2012-02-07  Kai Tietz  <ktietz@redhat.com>
            Dave Korn  <dave.korn.cygwin@gmail.com>

        PR target/40068
        * config/i386/winnt-cxx.c (i386_pe_adjust_class_at_definition):
        Take care that typinfo gets dllexport-attribute.

2012-02-07  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/52074
        * expr.c (expand_expr_addr_expr_1): For CONSTANT_CLASS_P or CONST_DECL
        if modifier < EXPAND_SUM call force_operand on the result.

2012-02-07  Joern Rennecke  <joern.rennecke@embecosm.com>

        * config/epiphany/epiphany.h (ASM_DECLARE_FUNCTION_SIZE): Redefine,
        adding __forwarder_dst__ prefix if a forwarder_section attribute is
        present.
        (epiphany_function_type): Replace types for specific interrupts with
        EPIPHANY_FUNCTION_INTERRUPT.
        (EPIPHANY_INTERRUPT_P): Update.
        * config/epiphany/epiphany.c (epiphany_handle_forwarder_attribute):
        New static function.
        (epiphany_attribute_table) <interrupt>: min_len is 0, max_len is 9.
        <disinterrupt>: Affects type identity.
        (epiphany_handle_interrupt_attribute): Handle variable number of
        arguments.
        (epiphany_compute_function_type): Update for new
        epiphany_function_type definition.
        (epiphany_expand_prologue): Don't save (reg:DI GPR_0) for interrupt
        handlers with a longcall forwarder.
        (epiphany_start_function): Handle multiple interrupt arguments and/or
        forwarder_section attribute.

        * config/epiphany/epiphany.h (LIB_SPEC): Link libc again after
        libgloss.

2012-02-07  Alan Modra  <amodra@gmail.com>

        PR target/52107
        * config/rs6000/rs6000.c (rs6000_emit_move): Don't create DImode
        subregs of TFmode.

2012-02-06  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

        PR tree-optimization/50969
        * tree-vect-stmts.c (vect_model_store_cost): Correct statement cost to
        use vec_perm rather than vector_stmt.
        (vect_model_load_cost): Likewise.
        * config/i386/i386.c (ix86_builtin_vectorization_cost): Change cost of
        vec_perm to be the same as other vector statements.
        * config/rs6000/rs6000.c (rs6000_builtin_vectorization_cost): Revise
        cost of vec_perm for TARGET_VSX.

2012-02-06  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52115
        * tree-sra.c (access_has_replacements_p): New function.
        (sra_modify_assign): Use it to decide whether a use is uninitialized.

2012-02-06  Patrick Marlier  <patrick.marlier@gmail.com>

        PR middle-end/52047
        * trans-mem.c (expand_call_tm): Add an assertion.
        * calls.c (flags_from_decl_or_type): Add ECF_TM_PURE to 'no vops'
        functions.

2012-02-06  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/50955
        * tree-ssa-loop-ivopts.c (get_computation_cost_at): Artificially
        raise cost of expressions that replace an address with an
        expression based on a different pointer.

2012-02-06  Jakub Jelinek  <jakub@redhat.com>

        PR target/52129
        * calls.c (mem_overlaps_already_clobbered_arg_p): If val is
        CONST_INT_P, subtract resp. add crtl->args.pretend_args_size to it.

2012-02-06  Jonathan Wakely  <jwakely.gcc@gmail.com>

        PR c++/48680
        * doc/invoke.texi (C++ Dialect Options): Use @option markup for
        -Weffc++ and specify guidelines come from second edition.

2012-02-05  Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/mips.md (sibcall_internal, sibcall_value_internal)
        (sibcall_value_multiple_internal, call_split, call_internal_direct)
        (call_direct_split, call_value_split, call_value_internal_direct)
        (call_value_direct_split, call_value_multiple_split): Use jal and
        jal_macro attributes.

2012-02-05  Richard Sandiford  <rdsandiford@googlemail.com>

        * reload1.c (reload_regs_reach_end_p): Replace with...
        (reload_reg_rtx_reaches_end_p): ...this function.
        (new_spill_reg_store): Update commentary.
        (emit_input_reload_insns): Don't clear new_spill_reg_store here.
        (emit_output_reload_insns): Check reload_reg_rtx_reaches_end_p
        before setting new_spill_reg_store.
        (emit_reload_insns): Use a separate loop to clear new_spill_reg_store.
        Use reload_reg_rtx_reaches_end_p instead of reload_regs_reach_end_p.
        Also use reload_reg_rtx_reaches_end_p when reading new_spill_reg_store
        for non-spill reload registers.

2012-02-05  Ira Rosen  <irar@il.ibm.com>

        PR tree-optimization/52091
        * tree-vectorizer.h (vect_is_simple_use): Add an argument.
        (vect_is_simple_use_1): Likewise.
        * tree-vect-loop.c (vectorizable_reduction): Update calls
        to vect_is_simple_use_1 and vect_is_simple_use.
        (vectorizable_live_operation): Likewise.
        * tree-vect-patterns.c (widened_name_p,
        vect_recog_vector_vector_shift_pattern, check_bool_pattern): Likewise.
        * tree-vect-stmts.c (process_use, vect_get_vec_def_for_operand,
        vectorizable_call, vectorizable_conversion, vectorizable_assignment,
        vectorizable_shift,vectorizable_operation, vectorizable_store,
        vectorizable_load): Likewise.
        (vect_is_simple_cond): Add an argument, pass it to
        vect_is_simple_use_1.
        (vectorizable_condition): Update calls to vect_is_simple_cond,
        vect_is_simple_use.
        (vect_is_simple_use): Add an argument, the statement in which
        OPERAND is used.  Check that if OPERAND's def stmt is a double
        reduction phi node, the use is a phi node too.
        (vect_is_simple_use_1): Add an argument, pass it to
        vect_is_simple_use.
        * tree-vect-slp.c (vect_get_and_check_slp_defs): Update a call
        to vect_is_simple_use.

2012-02-04  Jakub Jelinek  <jakub@redhat.com>

        PR rtl-optimization/52095
        * modulo-sched.c (dump_insn_locator): New function.
        (loop_canon_p, sms_schedule): Use it.

        PR rtl-optimization/52113
        * lower-subreg.c (decompose_multiword_subregs): Call recog_memoized
        even for decomposable shift/zext insns.

2012-02-03  Jakub Jelinek  <jakub@redhat.com>
            Zdenek Dvorak  <ook@ucw.cz>

        PR rtl-optimization/52092
        * loop-unswitch.c (unswitch_single_loop): Call copy_rtx_if_shared
        on get_iv_value result.

2012-02-02  Andrew Pinski  <apinski@cavium.com>

        PR middle-end/47982
        PR middle-end/43967
        * doc/libgcc.texi (__udivmoddi4/__udivmodti4): Fix documentation typo.

2012-02-02  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/48071
        * diagnostic.c (diagnostic_finish): Remove trailing newlines.

2012-02-02  Vladimir Makarov  <vmakarov@redhat.com>

        PR rtl-optimization/49800
        * haifa-sched.c (sched_init): Call regstat_init_n_sets_and_refs.
        (sched_finish): Call regstat_free_n_sets_and_refs.

2012-02-02  Jia Liu  <proljc@gmail.com>

        * config/mips/mips-dspr2.md (mips_prepend): Mask operand 3 rather
        than operand 2.

2012-02-02  Jan Hubicka  <jh@suse.cz>
            Tom de Vries  <tom@codesourcery.com>

        PR middle-end/51998
        * cgraphunit.c (cgraph_analyze_function): Break cyclic aliases.
        * varpool.c (varpool_analyze_pending_decls): Likewise.

2012-02-02  Sumanth G <sumanth.gundapaneni@kpitcummins.com>
            Jayant R Sonar <jayant.sonar@kpitcummins.com>

        * config.gcc: Add cr16-* support.

        * doc/extend.texi: Document cr16 extensions.
        * doc/install.texi: Document cr16 install.
        * doc/invoke.texi: Document cr16 options.
        * doc/md.texi: Document cr16 constraints.

        * common/config/cr16/cr16-common.c: New file.
        * config/cr16/cr16.c: New file.
        * config/cr16/cr16.h: New file.
        * config/cr16/cr16.md: New file.
        * config/cr16/cr16.opt: New file.
        * config/cr16/cr16-protos.h: New file.
        * config/cr16/predicates.md: New file.
        * config/cr16/constraints.md: New file.
        * config/cr16/t-cr16: New file.

2012-02-02  Jakub Jelinek  <jakub@redhat.com>

        PR target/52086
        * config/i386/i386.md (*addqi_2 peephole with SImode addition): Check
        that operands[2] is either immediate, or q_regs_operand.

        PR tree-optimization/52073
        * tree-vect-stmts.c (vect_mark_relevant): When checking uses of
        a pattern stmt for pattern uses, ignore uses outside of the loop.

2012-02-01  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.c: Resolve all AS1 and AS2 macros.
        * config/avr/avr.h (AS1, AS2, AS2C, AS3): Remove.
        (OUT_AS1, OUT_AS2): Remove.

2012-02-01  Georg-Johann Lay  <avr@gjlay.de>

        PR rtl-optimization/51374
        * combine.c (can_combine_p): Don't allow volatile_refs_p insns
        to cross other volatile_refs_p insns.

2012-02-01  Richard Guenther  <rguenther@suse.de>

        * doc/invoke.texi (fno-inline): Clarify documentation.
        (finline-small-functions): Likewise.
        (finline-functions): Likewise.
        * common.opt (finline): Adjust comment and documentation.
        (finline-small-functions): Clarify documentation.
        (finline-functions): Likewise.
        (finline-functions-called-once): Likewise.

2012-02-01  Tristan Gingold  <gingold@adacore.com>

        * c-typeck.c (composite_type): Keep mode for pointers.

2012-01-31  Richard Sandiford  <rdsandiford@googlemail.com>

        * function.h (regno_reg_rtx): Adjust comment.
        * reginfo.c (init_reg_modes_target): Only use the previous mode
        if it fits within one register.  Remove MIPS comment.

2012-01-31  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/52058
        * combine.c (do_SUBST_LINK, SUBST_LINK): Guard with #ifndef HAVE_cc0.

2012-01-31  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * config/s390/s390.md ("*ashr<mode>3_and"): Add missing z196 flag
        to srak instruction.

2012-01-31  Matthew Gretton-Dann  <matthew.gretton-dann@arm.com>

        * config/arm/thumb2.md (thumb2_mov_notscc): Use MVN for true condition.

2012-01-31  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/52041
        PR bootstrap/52039
        PR target/51974
        * ipa-prop.c (detect_type_change_1): Call ao_ref_init.

2012-01-31  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/51528
        * tree-sra.c (sra_modify_assign): Avoid copy-in/out for aggregate
        assigns.

2012-01-31  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/52041
        PR bootstrap/52039
        PR target/51974
        * ree.c (add_removable_extension): Change def_map argument
        to unsigned *, store in def_map 1 + offset into *insn_list vector
        instead of pointers into the vector.
        (find_removable_extensions): Adjust caller.

2012-01-30  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.md: Resolve all AS1 and AS2 macros.
        Transform all "* quoted-c-code" to { c-code }.
        Remove redundant test for "optimize" in combine patterns.
        Move (include "avr-dimode.md") to end of file.

2012-01-30  Bin Cheng  <bin.cheng@arm.com>

        PR target/51835
        * config/arm/arm.c (arm_libcall_uses_aapcs_base): Use correct ABI
        for __aeabi_d2iz/__aeabi_d2uiz with hard-float.

2012-01-30  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52028
        * tree-loop-distribution.c (ldist_gen): Properly update
        virtual SSA form.

2012-01-30  Jakub Jelinek  <jakub@redhat.com>

        PR debug/52027
        * dwarf2out.c (dwarf2out_switch_text_section): Don't call
        set_cur_line_info_table if not emitting debug info.

        PR tree-optimization/52046
        * tree-vect-patterns.c (check_bool_pattern): Give up if
        a comparison could throw.

        PR debug/52048
        * tree-ssa-tail-merge.c (local_def): Ignore debug uses.

2012-01-30  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52045
        * tree-optimize.c (execute_cleanup_cfg_post_optimizing): Update
        SSA form if cfgcleanup did anything.

2012-01-30  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52045
        * ipa-inline-transform.c (inline_transform): Call execute_fixup_cfg
        before computing final todo.

2012-01-30  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/51528
        * tree-sra.c (sra_modify_assign): Re-factor in preparation
        for PR51528 fix.

2012-01-30  Paolo Bonzini  <bonzini@gnu.org>

        * df-problems.c (df_kill_notes): Check that the use refers
        to the note under examination.

2012-01-30  Eric Botcazou  <ebotcazou@adacore.com>

        PR target/51920
        * config/sparc/sparc.c (vector_init_fpmerge): Remove INNER_MODE
        parameter and use short-lived pseudos.
        (vector_init_faligndata): Remove INNER_MODE parameter and use loop.
        (sparc_expand_vector_init): Const-ify local variables and adjust
        calls to above functions.

2012-01-30  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.c (out_movqi_mr_r): Fix length computation.

2012-01-29  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/invoke.texi: Make usage of "compile time" and
        "run time"/"runtime" consistent throughout the file.

2012-01-29  Uros Bizjak  <ubizjak@gmail.com>

        * config/alpha/alpha.c (alpha_option_override): Default to
        full IEEE compliance mode for Go language.

2012-01-29  Tijl Coosemans  <tijl@coosemans.org>

        * config/freebsd-spec.h [TARGET_LIBC_PROVIDES_SSP]
        (LINK_SSP_SPEC): Define.

2012-01-28  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        PR target/51871
        * config/pa/pa.c (pa_return_addr_rtx): Add support for PA2.0 export
        stubs.

2012-01-28  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/invoke.texi: Correct hyphenation of "floating point",
        "double precision", and related terminology throughout the file.

2012-01-28  Jakub Jelinek  <jakub@redhat.com>

        PR target/52006
        * config/arm/arm.md (pic_add_dot_plus_eight peephole2): Use
        arm_general_register_operand predicate for operand 2 instead of
        register_operand.

2012-01-27  Ian Lance Taylor  <iant@google.com>

        PR go/47656
        * builtins.def (BUILT_IN_INIT_HEAP_TRAMPOLINE): Define.
        * builtins.c (expand_builtin_init_trampoline): Add onstack
        parameter.  Change caller.
        (expand_builtin): Handle BUILT_IN_INIT_HEAP_TRAMPOLINE.
        * tree.c (build_common_builtin_nodes): Declare
        __builtin_init_heap_trampoline.

2012-01-27  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr-protos.h (lpm_reg_rtx, lpm_addr_reg_rtx,
        tmp_reg_rtx, zero_reg_rtx, all_regs_rtx, rampz_rtx): Make global.
        * config/avr/avr.c: Ditto.
        (avr_regnames): Remove because unused.
        * config/avr/avr.md (*cpse.ne): New peephole.
        (*cpse.eq): New peephole from former cpse peepholes.

2012-01-27  Michael Eager  <eager@eagercon.com>

        * config/microblaze.c (microblaze_emit_compare): Correct
        test after pcmp instruction.

2012-01-27  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/52020
        * tree-sra.c (sra_modify_assign): Do not transform clobbers.

2012-01-27  Richard Guenther  <rguenther@suse.de>

        * ipa-pure-const.c (check_stmt): Clobbers do not make a
        function non-const/pure.

2012-01-27  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/50444
        * tree-sra.c (build_ref_for_offset): Properly adjust the
        MEM_REF type for unaligned accesses.

2012-01-27  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/50444
        * expr.c (mem_ref_refers_to_non_mem_p): New function.
        (expand_assignment): Use it.  Properly handle misaligned
        bases when expanding stores to component references.
        (expand_expr_real_1): Use mem_ref_refers_to_non_mem_p and
        refactor that case.

2012-01-27  Andrey Belevantsev  <abel@ispras.ru>

        PR middle-end/51389
        * Makefile.in (tree-data-ref.o): Depend on $(PARAMS_H).
        * tree-data-ref.h (find_data_references_in_loop): Remove declaration.
        * tree-data-ref.c (find_data_references_in_loop): Make static.
        (compute_all_dependences): Change return type to bool.  Bail out
        for too many datarefs in a loop.  Move the hunk resetting the data
        dependences vector from ...
        (compute_data_dependences_for_loop): ... here.  Account for
        compute_all_dependences returning false.
        (compute_data_dependences_for_bb): Likewise.
        * params.def (PARAM_LOOP_MAX_DATAREFS_FOR_DATADEPS): New param.
        * doc/invoke.texi (loop-max-datarefs-for-datadeps): Document it.

2012-01-27  Richard Guenther  <rguenther@suse.de>

        PR middle-end/51959
        * expr.c (store_field): Use the alias-set of the scratch memory
        for storing to it.

2012-01-27  Tom de Vries  <tom@codesourcery.com>

        PR tree-optimization/51990
        * tree-ssa-sccvn.c (copy_reference_ops_from_ref): Handle
        WITH_SIZE_EXPR.
        * tree-ssa-pre.c (create_component_ref_by_pieces_1): Same.

2012-01-27  Jakub Jelinek  <jakub@redhat.com>

        PR debug/52001
        * var-tracking.c (reverse_op): Don't add any reverse operation
        if V already has any constant locations.

2012-01-27  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/invoke.texi: Correct usage of "command line" (noun)
        vs "command-line" (adjective) throughout.

2012-01-27  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/invoke.texi (Language Independent Options): Move
        -Wcoverage-mismatch blurb from here....
        (Warning Options): ...to here.

2012-01-27  Peter Bergner  <bergner@vnet.ibm.com>

        * config/rs6000/rs6000.c (rs6000_option_override_internal):
        Set rs6000_always_hint to false for 476.

2012-01-27  Matthias Klose  <doko@ubuntu.com>

        * gcc.c (add_sysrooted_prefix): Remove trailing dir separator from
          system root.
        * incpath.c (add_standard_paths): Likewise.

2012-01-27  Richard Henderson  <rth@redhat.com>

        * config/m68k/m68k.c (TARGET_ATOMIC_TEST_AND_SET_TRUEVAL): New.
        * config/m68k/sync.md (atomic_test_and_set): Rename from
        sync_test_and_setqi and adjust the operands.
        (atomic_test_and_set_1): Rename from sync_test_and_setqi_1
        and unconditionally enable.

2012-01-27  Richard Henderson  <rth@redhat.com>

        * config/sparc/sparc.c (TARGET_ATOMIC_TEST_AND_SET_TRUEVAL): New.
        * config/sparc/sync.md (atomic_test_and_set): Only handle QImode.
        (ldstub): Rename from ldstubqi.
        (ldstub<I24MODE>): Remove.

2012-01-27  Richard Henderson  <rth@redhat.com>

        * target.def (TARGET_ATOMIC_TEST_AND_SET_TRUEVAL): New.
        * c-cppbuiltin.c (cpp_atomic_builtins): Define
        __GCC_ATOMIC_TEST_AND_SET_TRUEVAL.
        * doc/tm.texi.in (TARGET_ATOMIC_TEST_AND_SET_TRUEVAL): Add doc hook.
        * doc/tm.texi: Rebuild.

2012-01-27  Richard Henderson  <rth@redhat.com>

        * optabs.c (gen_atomic_test_and_set): Remove default.
        (maybe_emit_atomic_test_and_set): Use maybe_expand_insn.

2012-01-26  Jakub Jelinek  <jakub@redhat.com>

        PR rtl-optimization/51978
        * ree.c (make_defs_and_copies_lists): Change set_pat type to const_rtx.
        (combine_reaching_defs): Likewise.
        (struct re_info): Remove.
        (add_removable_extension): Remove x and data arguments,
        add insn, insn_list and def_map.  Use the arguments directly
        instead of using struct re_info.
        (find_removable_extensions): Don't call add_removable_extension
        through note_stores, instead just call it with single_set
        result if non-NULL.
        (find_and_remove_re): Pass curr_cand->expr instead of
        PATTERN (curr_cand->insn) as set_pat argument to combine_reaching_defs.

2012-01-26  Michael Matz  <matz@suse.de>

        PR tree-optimization/46590
        * cfgexpand.c: Revert last change (r183305).
        * gimplify.c (gimplify_bind_expr): Add clobbers for all non-gimple
        regs.
        * tree-eh.c (cleanup_empty_eh): Try to optimize clobbers before
        checking for emptiness.

2012-01-26  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/51895
        * expr.c (expand_expr_real_1): Handle BLKmode MEM_REF of
        non-addressable non-BLKmode base correctly.

2012-01-26  Michael Matz  <matz@suse.de>

        PR tree-optimization/48794
        * tree-eh.c (remove_unreachable_handlers_no_lp): Don't remove
        regions referenced from RESX/EH_DISPATCH.

2012-01-26  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * config/s390/s390.h: Make BRANCH_COST an option.
        * config/s390/s390.opt: New option -mbranch-cost.

2012-01-26  Richard Henderson  <rth@redhat.com>

        Revert 2012-01-24 change:
        * trans-mem.c (requires_barrier): Do not instrument thread local
        variables and emit save/restore for them.

2012-01-25  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/51986
        * sched-deps.c (sched_get_condition_with_rev_uncached): Don't test
        for pat == 0.

2012-01-25  Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/mips.c (mips_small_data_pattern_1): Don't process
        ASM_OPERANDS.

2012-01-25  Georg-Johann Lay  <avr@gjlay.de>

        PR target/49868
        Rename __pgm to __flash.
        Rename __pgm1 to __flash1.
        Rename __pgm2 to __flash2.
        Rename __pgm3 to __flash3.
        Rename __pgm4 to __flash4.
        Rename __pgm5 to __flash5.
        Rename __pgmx to __memx.
        * doc/extend.texi (AVR Named Address Spaces)
        Rename address space names as indicated above.
        * config/avr/avr.c (avr_addrspace): Ditto.

        * config/avr/avr-protos.h
        (avr_mem_pgmx_p): Rename to avr_mem_memx_p.
        (avr_mem_pgm_p): Rename to avr_mem_flash_p.
        * config/avr/predicates.md: Ditto.
        * config/avr/avr.c Ditto, and
        (avr_decl_pgmx_p): Rename to avr_decl_memx_p.
        (avr_decl_pgm_p): Rename to avr_decl_flash_p.

        * config/avr/avr.h (ADDR_SPACE_PGM): Rename to ADDR_SPACE_FLASH.
        (ADDR_SPACE_PGM1): Rename to ADDR_SPACE_FLASH1.
        (ADDR_SPACE_PGM2): Rename to ADDR_SPACE_FLASH2.
        (ADDR_SPACE_PGM3): Rename to ADDR_SPACE_FLASH3.
        (ADDR_SPACE_PGM4): Rename to ADDR_SPACE_FLASH4.
        (ADDR_SPACE_PGM5): Rename to ADDR_SPACE_FLASH5.
        (ADDR_SPACE_PGMX): Rename to ADDR_SPACE_MEMX.
        * config/avr/avr.c: Ditto.
        * config/avr/avr.md: Ditto.

2012-01-25  Jason Merrill  <jason@redhat.com>

        PR c++/51992
        * tree.c (find_decls_types_in_node): Walk gimple_call_fntype.

2012-01-25  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/51987
        * tree-data-ref.c (get_references_in_stmt): Handle references in
        non-volatile GIMPLE_ASM.

2012-01-25  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-sccvn.c (vn_reference_eq): Also compare if both
        bases are dereferenced.

2012-01-25  Andrey Belevantsev  <abel@ispras.ru>

        PR rtl-optimization/48374
        * sel-sched-ir.h (get_all_loop_exits): Check for zero successors.

2012-01-25  Andrey Belevantsev  <abel@ispras.ru>

        * tree-predcom.c (tree_predictive_commoning_loop): Bail out when
        compute_data_dependences_for_loop returns false.
        * tree-parloops.c (loop_parallel_p): Likewise.

2012-01-25  Richard Guenther  <rguenther@suse.de>

        * tree.h (get_pointer_alignment_1): Declare.
        * builtins.c (get_pointer_alignment_1): New function.
        (get_pointer_alignment): Use it.

2012-01-25  Ramana Radhakrishnan  <ramana.radhakrishnan@linaro.org>

        PR rtl-optimization/48308
        * combine.c (enum undo_kind): Add UNDO_LINKS.
        (struct undo): Add member l to other_contents and where.
        (do_SUBST_LINK): New.
        (SUBST_LINK): New.
        (try_combine): Handle LOG_LINKS for the dummy i1 case.
        (undo_all): Handle UNDO_LINKS.

2012-01-25  Richard Henderson  <rth@redhat.com>

        * optabs.c (maybe_emit_atomic_test_and_set): Allow non-QImode
        mem inputs.

2012-01-24  Richard Sandiford  <rdsandiford@googlemail.com>

        * optabs.c (gen_atomic_test_and_set): Use each argument.

2012-01-24  Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/mips-ps-3d.md (mips_addr_ps, reduc_splus_v2sf)
        (mips_cvt_pw_ps, mips_cvt_ps_pw, mips_mulr_ps, mips_cabs_cond_<fmt>)
        (mips_cabs_cond_4s, mips_cabs_cond_ps, bc1any4t, bc1any4f, bc1any2t)
        (bc1any2f, mips_rsqrt1_<fmt>, mips_rsqrt2_<fmt>, mips_recip1_<fmt>)
        (mips_recip2_<fmt>): Require TARGET_MIPS3D rather than
        TARGET_PAIRED_SINGLE_FLOAT.

2012-01-24  Richard Sandiford  <rdsandiford@googlemail.com>

        * doc/rtl.texi (MEM_IN_STRUCT_P, MEM_SCALAR_P): Delete.
        (in_struct, return_val): Remove MEM documentation.
        * rtl.h (rtx_def): Remove MEM meanings from in_struct and return_val.
        (MEM_IN_STRUCT_P, MEM_SCALAR_P): Delete.
        (MEM_COPY_ATTRIBUTES): Remove references to MEM_IN_STRUCT_P
        and MEM_SCALAR.
        * emit-rtl.c (set_mem_attributes_minus_bitpos): Likewise.
        * cfgexpand.c (add_alias_set_conflicts): Likewise.
        * expr.c (store_field): Likewise.
        * function.c (assign_stack_temp_for_type): Likewise.
        * ifcvt.c (noce_try_cmove_arith): Likewise.
        * reload1.c (reload): Likewise.
        * config/alpha/alpha.c (alpha_set_memflags_1): Likewise.
        (alpha_set_memflags): Likewise.
        * config/m32c/m32c.c (m32c_immd_dbl_mov): Nullify.

2012-01-24  Richard Sandiford  <rdsandiford@googlemail.com>

        * rtl.h (true_dependence, canon_true_dependence): Remove varies
        parameter.
        * alias.c (fixed_scalar_and_varying_struct_p): Delete.
        (true_dependence_1, write_dependence_p, may_alias_p): Don't call it.
        (true_dependence_1, true_dependence, canon_true_dependence): Remove
        varies parameter.
        * cselib.c (cselib_rtx_varies_p): Delete.
        (cselib_invalidate_mem): Update call to canon_true_dependence.
        * dse.c (record_store, check_mem_read_rtx): Likewise.
        (scan_reads_nospill): Likewise.
        * cse.c (check_dependence): Likewise.
        (cse_rtx_varies_p): Delete.
        * expr.c (safe_from_p): Update call to true_dependence.
        * ira.c (validate_equiv_mem_from_store): Likewise.
        (memref_referenced_p): Likewise.
        * postreload-gcse.c (find_mem_conflicts): Likewise.
        * sched-deps.c (sched_analyze_2): Likewise.
        * store-motion.c (load_kills_store): Likewise.
        * config/frv/frv.c (frv_registers_conflict_p_1): Likewise.
        * gcse.c (mems_conflict_for_gcse_p): Likewise.
        (compute_transp): Update call to canon_true_dependence.

2012-01-25  Richard Henderson  <rth@redhat.com>

        * optabs.c (CODE_FOR_atomic_test_and_set): Provide default.
        (maybe_emit_atomic_test_and_set): New.
        (expand_sync_lock_test_and_set): Use it.
        (expand_atomic_test_and_set): Likewise.
        * doc/extend.texi (__atomic_test_and_set): Adjust the docs to match
        the implementation; clarify implementation defined details.
        * doc/md.texi (atomic_test_and_set): Document.

2012-01-25  Richard Henderson  <rth@redhat.com>

        * config/sparc/predicates.md (zero_or_v7_operand): Use match_code.

2012-01-25  Richard Henderson  <rth@redhat.com>

        PR target/51968
        * config/arm/arm.c (neon_split_vcombine): Emit deleted note
        to effect no-op split.

2012-01-24  Aldy Hernandez  <aldyh@redhat.com>

        PR lto/51698
        * builtin-types.def: (BT_CONST_DOUBLE_PTR): New.
        (BT_FN_VOID_PTR_CONST_PTR_SIZE): New.
        (BT_FN_VOID_PTR_INT_SIZE): New.
        (BT_FN_UINT_UINT_VAR): Remove.
        (BT_FN_UINT32_UINT32_VAR): New.
        (BT_FN_DOUBLE_VPTR): Remove.
        (BT_FN_DOUBLE_CONST_DOUBLE_PTR): New.

        * gtm-builtins.def (_ITM_abortTransaction): Set return type to void.
        (_ITM_changeTransactionMode): Same.
        (_ITM_memmoveRtWt): Change return type to void.
        (_ITM_memcpyRtWt): Same.
        (_ITM_memsetW): Same.
        (_ITM_RaRD): Change types to double.
        (_ITM_RD): Same.
        (_ITM_RaWD): Same.
        (_ITM_RfWD): Same.

        * builtins.def (DEF_TM_BUILTIN): Set BOTH_P to true.

2012-01-24  Aldy Hernandez  <aldyh@redhat.com>
            Patrick Marlier  <patrick.marlier@gmail.com>

        * trans-mem.c (requires_barrier): Do not instrument thread local
        variables and emit save/restore for them.

2012-01-24  Jason Merrill  <jason@redhat.com>

        PR c++/51812
        * cgraphunit.c (cgraph_decide_is_function_needed): Don't always
        output static aliases.

2012-01-24  Jakub Jelinek  <jakub@redhat.com>

        PR driver/47249
        * common.opt (-pie, -shared, pie, shared): Change from Common to
        Driver.
        * gcc.c (display_help): Display help for -pie and -shared.

2012-01-24  Georg-Johann Lay  <avr@gjlay.de>

        PR target/49868
        * doc/extend.texi (AVR Named Address Spaces): Move sample code up.
        Remove note on size/offset limitation.
        (AVR Variable Attributes): Add example how to read data located
        with progmem.  Refer to named address spaces.
        * doc/invoke.texi (AVR Options): Fix typo.

2012-01-24  Richard Guenther  <rguenther@suse.de>

        Forward-port to trunk
        2010-09-21  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/45678
        * expr.c (expand_expr_real_1) <case VIEW_CONVERT_EXPR>: If
        op0 isn't sufficiently aligned and there is movmisalignM
        insn for mode, use it to load op0 into a temporary register.

2012-01-24  Jakub Jelinek  <jakub@redhat.com>

        PR target/51957
        * target.def (const_not_ok_for_debug_p): New hook.
        * doc/tm.texi.in (TARGET_CONST_NOT_OK_FOR_DEBUG_P): New hook
        documentation.
        * doc/tm.texi: Regenerated.
        * dwarf2out.c (const_ok_for_output_1): If
        targetm.const_not_ok_for_debug_p returns true, fail.
        * config/rs6000/rs6000.c (rs6000_const_not_ok_for_debug_p): New
        function.
        (TARGET_CONST_NOT_OK_FOR_DEBUG_P): Redefine.

2012-01-23  Kai Tietz  <ktietz@redhat.com>

        PR target/51900
        * config/i386/predicates.md (symbolic_operand): Allow
        UNSPEC_PCREL as PIC expression for lea.
        * config/i386/winnt.c (i386_pe_binds_local_p): Reworked.
        * config/i386/i386.c (ix86_delegitimize_address): Handle
        UNSPEC_PCREL for none-MEM, too.

2012-01-23  Aldy Hernandez  <aldyh@redhat.com>

        * trans-mem.c (ipa_tm_create_version): Set externally_visible.
        (ipa_tm_create_version_alias): Same.

2012-01-23  Uros Bizjak  <ubizjak@gmail.com>

        PR libitm/51830
        * builtin-types.def (BT_FN_UINT_UINT_VAR): New.
        * gtm-builtins.def (BUILT_IN_TM_START): Declare as BT_FN_UINT_UINT_VAR.

2012-01-23  Aldy Hernandez  <aldyh@redhat.com>
            Patrick Marlier  <patrick.marlier@gmail.com>
            Iain Sandoe  <developer@sandoe-acoustics.co.uk>

        PR lto/51916
        * lto-wrapper.c (run_gcc): Pass the LTO section name to
        simple_object_start_read.

2012-01-23  Richard Guenther  <rguenther@suse.de>


        PR tree-optimization/51895
        * tree-sra.c (decide_one_param_reduction): Avoid sub-optimal
        parameter decomposition into BLKmode components.

2012-01-23  Eric Botcazou  <ebotcazou@adacore.com>

        * tree-ssa-structalias.c (intra_create_variable_infos): Do not create
        fake variables for restrict-qualified pointers whose pointed-to type
        contains a placeholder.

2012-01-23  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/51949
        * ipa-split.c (execute_split_functions): Do not split malloc functions.

2012-01-23  Jakub Jelinek  <jakub@redhat.com>

        PR rtl-optimization/51933
        * ree.c (transform_ifelse): Return true right away if dstreg is
        already wider or equal to cand->mode.
        (enum ext_modified_kind, struct ext_modified, ext_state): New types.
        (make_defs_and_copies_lists): Remove defs_list and copies_list
        arguments, add state argument, just truncate state->work_list
        instead of always allocating and freeing the vector.  Assert that
        get_defs succeeds instead of returning 2.  Changed return type to bool.
        (merge_def_and_ext): Add state argument.  If SET_DEST doesn't
        have ext_src_mode, see if it has been modified already with the
        right kind of extension and has been extended before from the
        ext_src_mode.  If SET_DEST is already wider or equal to cand->mode,
        just return true.  Remember the original mode in state->modified array.
        (combine_reaching_defs): Add state argument.  Don't allocate and
        free here def_list, copied_list and vec vectors, instead just
        VEC_truncate the vectors in *state.  Don't handle outcome == 2 here.
        (find_and_remove_re): Set DF_DEFER_INSN_RESCAN df flag.
        Add state variable, clear vectors in it, initialize state.modified
        if needed.  Free all the vectors at the end and state.modified too.
        Don't skip a candidate if the extension expression has been modified.

2012-01-22  Douglas B Rupp  <rupp@gnat.com>

        PR target/47096
        * config.gcc: (i[34567]86-*-interix3*): Remove from obsolete
         configurations. Change triplet to i[34567]86-*-interix[3-9]*.
        (extra_options) interix.opt -> i386/interix.opt"
        (extra_objs):Add winnt-stubs.o
        * configure.ac: Add interix to target_os .comm on PE check.
        * configure: Regenerate.
        * config/interix3.h: Delete and move bits to..
        * config/interix.h: Delete and move bits to..
        * config/i386/i386-interix3.h: Delete and move bits to..
        * config/i386/i386-interix.h: ..here.
        (TARGET_CPU_DEFAULT): Remove redefinition.
        (TARGET_ASM_CONSTRUCTOR): Undefine.
        (SUBTARGET_SWITCHES): Define for ms-bitfields.
        (TARGET_OS_CPP_BUILTINS): Remove __OPENNT. Add __declspec.
        (PTRDIFF_TYPE): Define.
        (LONG_DOUBLE_TYPE_SIZE): Define.
        (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Define.
        (SUBTARGET_OVERRIDE_OPTIONS): Remove.
        (TARGET_SECTION_TYPE_FLAGS): Define.
        (ASM_DECLARE_FUNCTION_NAME): Define.
        (ASM_OUTPUT_EXTERNAL): Define.
        (ASM_OUTPUT_EXTERNAL_LIBCALL): Define.
        (ASM_OUTPUT_ALIGNED_BSS): Define.
        (PCC_BITFIELD_TYPE_MATTERS): Define.
        (USE_CONST_SECTION): Define.
        (SUBTARGET_ENCODE_SECTION_INFO): Remove.
        (TARGET_ASM_FUNCTION_RODATA_SECTION): Remove.
        (SUPPORTS_ONE_ONLY): Remove.
        (I386_PE_STRIP_ENCODING): Define.
        * config/interix.opt: Delete and move bits to..
        * config/i386/interix.opt: ..here. New.
        (mpe-aligned-commons): Add.
        * config/i386/t-interix: Add copyright header.
        (winnt-stubs.o): Add rule.

2012-01-22  Jason Merrill  <jason@redhat.com>

        PR c++/51832
        * varpool.c (varpool_analyze_pending_decls): Copy DECL_EXTERNAL
        for extra name aliases.

2012-01-22  Eric Botcazou  <ebotcazou@adacore.com>

        PR rtl-optimization/51924
        * ree.c (combine_set_extension): Improve debugging message.
        (combine_reaching_defs): Likewise.
        (get_defs): Rename confusingly named variable.
        (find_and_remove_re): Skip a candidate if the extension expression has
        been modified.

2012-01-21  Robert Millan  <rmh@gnu.org>
            Gerald Pfeifer  <gerald@pfeifer.com>

        * config/kfreebsd-gnu.h (GNU_USER_DYNAMIC_LINKERX32): New macro.
        (GNU_USER_DYNAMIC_LINKER): Adjust indentation.

2012-01-20  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/51914
        * tree-vect-stmts.c (vectorizable_conversion): For
        cvt_type && modifier == WIDEN, put temporary with cvt_type
        at the beginning of vec_dsts and set vec_dest to temporary
        with vectype_out.

2012-01-20  Eric Botcazou  <ebotcazou@adacore.com>

        * cfgrtl.c (rtl_dump_bb): Do not dump insns for {ENTRY|EXIT}_BLOCK.

2012-01-20  Tijl Coosemans  <tijl@coosemans.org>

        * config/i386/i386.c: Fix checks for !TARGET_MACHO.
        * config/rs6000/rs6000.c: Likewise.

2012-01-20  Jakub Jelinek  <jakub@redhat.com>

        PR target/51915
        * config/arm/arm.c (arm_count_output_move_double_insns): Call
        output_move_double on a copy of operands array.

2012-01-20  Cary Coutant  <ccoutant@google.com>
            Dodji Seketeli  <dodji@redhat.com>

        PR debug/45682
        * dwarf2out.c (copy_declaration_context): Return ref to parent
        of declaration DIE, if necessary.
        (remove_child_or_replace_with_skeleton): Add new parameter; update
        caller.  Place skeleton DIE under parent DIE of original declaration.
        Move call to copy_declaration_context to here ...
        (break_out_comdat_types): ... from here.

2012-01-20  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        PR rtl-optimization/51856
        * reload.c (find_reloads_subreg_address): Set the address_reloaded
        flag to reloaded.

2012-01-20  Ramana Radhakrishnan  <ramana.radhakrishnan@linaro.org>

        PR target/51819
        * config/arm/arm.c (arm_print_operand): Correct output of alignment
        hints for neon loads and stores.

2012-01-20  Georg-Johann Lay  <avr@gjlay.de>

        PR target/49868
        PR target/50887
        * doc/extend.texi (Named Address Spaces): Split into subsections.
        (AVR Named Address Spaces): New subsection.
        (M32C Named Address Spaces): New subsection.
        (RL78 Named Address Spaces): New subsection.
        (SPU Named Address Spaces): New subsection.
        (Variable Attributes): New anchor "AVR Variable Attributes".
        (AVR Variable Attributes): Rewrite and avoid wording
        "address space" in this context.
        * doc/invoke.texi (AVR Options): Rewrite and add documentation
        for -maccumulate-args, -mbranch-cost=, -mrelax, -mshort-calls.
        (AVR Built-in Macros): New subsubsection therein.
        * doc/md.texi (AVR constraints): Remove "C04", "R".

2012-01-20  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/51903
        * tree-ssa-pre.c (eliminate): Properly purging of EH edges
        when removing stmts.

2012-01-20  Ramana Radhakrishnan  <ramana.radhakrishnan@linaro.org>

        PR target/50313
        * config/arm/arm.c (arm_load_pic_register): Use
        gen_pic_load_addr_unified. Delete calls to gen_pic_load_addr_32bit
        , gen_pic_add_dot_plus_eight and gen_pic_add_dot_plus_four.
        (arm_pic_static_addr): Likewise.
        (arm_rtx_costs_1): Adjust cost for UNSPEC_PIC_UNIFIED.
        (arm_note_pic_base): Handle UNSPEC_PIC_UNIFIED.
        * config/arm/arm.md (UNSPEC_PIC_UNIFIED): Define.
        (pic_load_addr_unified): New.

2012-01-20  Andrey Belevantsev  <abel@ispras.ru>

        PR target/51106
        * function.c (instantiate_virtual_regs_in_insn): Use
        delete_insn_and_edges when removing a wrong asm insn.

2012-01-19  Vladimir Makarov  <vmakarov@redhat.com>

        PR rtl-optimization/40761
        * ira-int.h (struct ira_loop_tree_node): Add comment for member loop.
        Add new member loop_num.
        (IRA_LOOP_NODE_BY_INDEX): Modify the check.
        (ira_build): Remove the parameter.

        * ira.c (ira_print_disposition): Use loop_num instead of loop->num.
        (ira.c): Do not build CFG loops for one region allocation.  Remove
        argument from ira_build call.

        * ira-build.c (init_loop_tree_node): New function.
        (create_loop_tree_nodes): Use it.  Separate the case when CFG
        loops are not built.
        (more_one_region_p): Check current_loops.
        (finish_loop_tree_nodes): Separate the case when CFG loops are not
        built.
        (add_loop_to_tree): Process loop equal to NULL too.
        (form_loop_tree): Separate the case when CFG loops are not built.
        Use explicitly number for the root.
        (rebuild_regno_allocno_maps, create_loop_tree_node_allocnos): Add
        an assertion.
        (ira_print_expanded_allocno, loop_compare_func): Use loop_num
        instead of loop->num.
        (mark_loops_for_removal): Ditto.  Use loop_num instead of loop->num.
        (mark_all_loops_for_removal): Ditto.
        (remove_unnecessary_regions): Separate the case when CFG loops
        are not built.
        (ira_build): Remove the parameter.  Use explicit number of regions
        when CFG loops are not built.

        * ira-color.c (print_loop_title): Separate the case for the root node.
        Use loop_num instead of loop->num.
        (move_spill_restore): Use loop_num instead of loop->num.

        * ira-emit.c (setup_entered_from_non_parent_p): Add an assertion.
        (change_loop): Ditto.
        (change_loop): Use loop_num instead of loop->num.

        * ira-lives.c (process_bb_node_lives): Ditto.

        * ira-costs.c (print_allocno_costs, find_costs_and_classes): Ditto.

        * ira-conflicts.c (print_allocno_conflicts): Ditto.

2012-01-19  Jakub Jelinek  <jakub@redhat.com>

        PR libmudflap/40778
        * tree-mudflap.c (mf_artificial): New function.
        (execute_mudflap_function_ops, execute_mudflap_function_decls,
        mx_register_decls, mudflap_enqueue_decl): Use it.

        PR target/51876
        * config/arm/neon.md (*neon_vswp<mode>): Fix up operand
        numbers in the insn pattern.

2012-01-19  Michael Matz  <matz@suse.de>

        PR tree-optimization/46590
        * cfgexpand.c (add_scope_conflicts_1): New old_conflicts argument,
        use it in remembering which conflicts we already created.
        (add_scope_conflicts): Adjust call to above, (de)allocate helper
        bitmap.

2012-01-19  Aldy Hernandez  <aldyh@redhat.com>

        PR lto/51280
        * lto-wrapper.c (run_gcc): Pass -fgnu_tm on.
        (merge_and_complain): Same.

2012-01-19  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/50237
        * config/initfini-array.h: Guard content of the header
        with #ifdef HAVE_INITFINI_ARRAY.
        * configure.ac: Move gcc_AC_INITFINI_ARRAY much later into the file.
        Add initfini-array.h to tm_file here.
        * acinclude.m4 (gcc_AC_INITFINI_ARRAY): For non-ia64 do a linker test.
        * config.gcc: Don't add initfini-array.h to tm_file here.
        * configure: Regenerated.

2012-01-19  Andrey Belevantsev  <abel@ispras.ru>

        PR rtl-optimization/51505
        * df-problems.c (df_kill_notes): New parameter live. Update comment.
        Remove REG_EQUAL/REG_EQUIV notes referring to dead registers.
        (df_note_bb_compute): Update the call to df_kill_notes.

2012-01-18  Aldy Hernandez  <aldyh@redhat.com>

        * trans-mem.c (requires_barrier): Remove call to is_global_var.

2012-01-18  Richard Guenther  <rguenther@suse.de>

        * tree-ssa.c (useless_type_conversion_p): Remove special-casing
        of conversions to void *.

2012-01-17  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
            Richard Sandiford  <rdsandiford@googlemail.com>

        PR middle-end/50325
        PR middle-end/51192
        * optabs.h (simplify_expand_binop): Declare.
        * optabs.c (simplify_expand_binop): Make global.
        * expmed.c (store_bit_field_1): Use simplify_expand_binop on big
        endian targets if the source cannot be exactly covered by word
        mode chunks.

2012-01-17  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/51872
        * hard-reg-set.h (struct hard_reg_set_container): New type.
        * target.h (struct hard_reg_set_container): Forward declare.
        * target.def (set_up_by_prologue): New target hook.
        * doc/tm.texi.in (TARGET_SET_UP_BY_PROLOGUE): Document it.
        * doc/tm.texi: Regenerated.
        * function.c (thread_prologue_and_epilogue_insns): Change
        set_up_by_prologue HARD_REG_SET into struct hard_reg_set_container.
        Call targetm.set_up_by_prologue on it.
        * config/rs6000/rs6000.c (rs6000_set_up_by_prologue): New function.
        (TARGET_SET_UP_BY_PROLOGUE): Redefine to it.

2012-01-17  Nick Clifton  <nickc@redhat.com>

        * config/rx/rx.c (rx_can_use_simple_return): New function.
        * config/rx/rx-protos.h (rx_can_use_simple_return): Prototype.
        * config/rx/rx.md (return): Predicate on rx_can_use_simple_return.

2012-01-17  Richard Guenther  <rguenther@suse.de>

        PR middle-end/51782
        * expr.c (expand_assignment): Take address-space information
        from the address operand of MEM_REF and TARGET_MEM_REF.
        (expand_expr_real_1): Likewise.

2012-01-17  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * ira.c (do_reload): Make sure ira_dump_file is re-set if no
        reload dump is requested.

2012-01-17  Aldy Hernandez  <aldyh@redhat.com>

        PR other/51165
        * trans-mem.c (requires_barrier): Call may_be_aliased.

2012-01-17  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/51877
        * tree-ssa-tail-merge.c (gimple_equal_p): Don't return true whenever
        call arguments and fndecls compare equal, instead return false if they
        don't.  Return true only if lhs1 and lhs2 are either both NULL, or
        both SSA_NAMEs that are valueized the same, or they satisfy
        operand_equal_p.

2012-01-17  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * configure.ac (gcc_cv_target_dl_iterate_phdr): Only check on
        Solaris 11+.
        * configure: Regenerate.

2012-01-16  Jan Hubicka  <jh@suse.cz>

        PR c/12245
        PR c++/14179
        * convert.c (convert_to_integer): Use fold_convert for
        converting an INTEGER_CST to integer type.

2012-01-16  Jason Merrill  <jason@redhat.com>

        PR c++/14179
        * vec.c (vec_gc_o_reserve_1): Use ggc_round_alloc_size.

2012-01-16  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/51860
        * config/s390/s390.c (s390_chunkify_start): Don't skip
        call insns followed by NOTE_INSN_CALL_ARG_LOCATION note.  Skip
        NOTE_INSN_VAR_LOCATION and NOTE_INSN_CALL_ARG_LOCATION notes.
        If insn is followed by NOTE_INSN_VAR_LOCATION or
        NOTE_INSN_CALL_ARG_LOCATION notes, insert jump after all those notes.
        Don't use location of note insns.

        PR tree-optimization/51865
        * tree-inline.c (tree_function_versioning): Call remap_decl
        on DECL_RESULT whenever it has VOID_TYPE_P type.

2012-01-15  Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/mips.c (mips16_build_call_stub): Don't use a stub
        for calls to locally-binding MIPS16 functions if only the return
        type uses float regs.

2012-01-15  Chung-Lin Tang  <cltang@codesourcery.com>
            Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/mips-protos.h (SYMBOL_FORCE_TO_MEM): Delete.
        (SYMBOL_32_HIGH): Likewise.
        (mips_output_tls_reloc_directive): Declare.
        * config/mips/mips.h (PIC_FUNCTION_ADDR_REGNUM): Move to mips.md.
        (mips_use_pcrel_pool_p, mips_lo_relocs, mips_hi_relocs): Declare.
        * config/mips/mips.c (mips_use_pcrel_pool_p): New variable.
        (mips_lo_relocs, mips_hi_relocs): Make extern.
        (mips16_stub_function): Move up file.
        (mips_classify_symbol): Remove SYMBOL_FORCE_TO_MEM handling.
        (mips_symbolic_constant_p): Likewise.  Remove SYMBOL_32_HIGH too.
        (mips_symbol_insns_1): Likewise.  Check mips_use_pcrel_pool_p.
        (mips_cannot_force_const_mem): Use mips_use_pcrel_pool_p instead of
        SYMBOL_FORCE_TO_MEM.  Only check mips_tls_symbol_ref_1 if it's false.
        (mips_get_tp): Add MIPS16 support.
        (mips_legitimize_tls_address): Remove MIPS16 sorry().
        Generalize DTPREL and TPREL handling.
        (mips_init_relocs): Initialize mips_use_pcrel_pool_p.
        Add MIPS16 TLS support.
        (mips_output_tls_reloc_directive): New function.
        (mips16_rewrite_pool_refs): Ignore UNSPEC_TLS_GET_TPs.
        * config/mips/predicates.md (symbolic_operand_with_high)
        (tls_reloc_operand): New predicates.
        (force_to_mem_operand): Use mips_use_pcrel_pool_p.
        * config/mips/mips.md (UNSPEC_UNSHIFTED_HIGH): New unspec.
        (PIC_FUNCTION_ADDR_REGNUM): Moved from mips.h.
        (*unshifted_high): New instruction.  Use it for MIPS16 high splitter.
        (consttable_tls_reloc, tls_get_tp_mips16_<mode>): New patterns.
        (*tls_get_tp_mips16_call_<mode>): Likewise.

2012-01-15  Uros Bizjak  <ubizjak@gmail.com>

        PR rtl-optimization/51821
        * recog.c (peep2_find_free_register): Determine clobbered registers
        from insn pattern.

2012-01-14  Denis Chertykov  <chertykov@gmail.com>

        PR target/50925
        * config/avr/avr-protos.h: Revert change of 2012-01-09.
        * config/avr/avr.c: Likewise.
        * config/avr/avr.h: Likewise.

2012-01-13  Ian Lance Taylor  <iant@google.com>

        PR c++/50012
        * tree.h (TYPE_QUALS): Add cast to int.
        (TYPE_QUALS_NO_ADDR_SPACE): Likewise.

2012-01-13  Ian Lance Taylor  <iant@google.com>

        * ipa-cp.c (ipa_get_indirect_edge_target): Add typecasts when
        comparing param_index to VEC_length result.

2012-01-13  Steven Bosscher  <steven@gcc.gnu.org>

        * c-decl.c: Do not include tree-mudflap.h
        * tree-optimize.c: Likewise.
        * Makefile.in: Update dependencies.

2012-01-13  Richard Guenther  <rguenther@suse.de>

        PR middle-end/8081
        * gimplify.c (gimplify_modify_expr_rhs): For calls with a
        variable-sized result always use RSO.

2012-01-12  DJ Delorie  <dj@redhat.com>

        * cfgexpand.c (convert_debug_memory_address): Allow any valid
        pointer type, not just the default pointer type.

2012-01-09  Richard Henderson  <rth@redhat.com>
            Denis Chertykov  <chertykov@gmail.com>

        PR target/50925
        * config/avr/avr-protos.h (avr_hard_regno_nregs): Declare.
        * config/avr/avr.c (avr_can_eliminate): Simplify.
        (avr_initial_elimination_offset): Likewise.
        (avr_prologue_setup_frame): Use hard_frame_pointer_rtx.
        (expand_epilogue): Likewise.
        (avr_legitimize_address): Gut.
        (avr_legitimize_reload_address): Use hard_frame_pointer_rtx.
        (avr_hard_regno_nregs): New.
        (avr_hard_regno_ok): Allow only Pmode for arg and frame_pointers.
        (avr_regno_mode_code_ok_for_base_b): Handle arg and frame pointers.
        * config/avr/avr.h (FIXED_REGISTERS): Adjust arg pointer,
        add soft frame pointer.
        (CALL_USED_REGISTERS): Likewise.
        (REG_CLASS_CONTENTS): Likewise.
        (REGISTER_NAMES): Likewise.
        (HARD_REGNO_NREGS): Use avr_hard_regno_nregs.
        (HARD_FRAME_POINTER_REGNUM): New.
        (FRAME_POINTER_REGNUM): Use soft frame pointer.
        (ELIMINABLE_REGS): Eliminate from the soft frame pointer,
        remove the HARD_FRAME_POINTER self-elimination.

2012-01-12  Georg-Johann Lay  <avr@gjlay.de>

        PR target/51756
        * config/avr/avr.c (avr_encode_section_info): Test for absence of
        DECL_EXTERNAL when checking for initializers of progmem variables.

2012-01-12  Ira Rosen  <irar@il.ibm.com>

        PR tree-optimization/51799
        * tree-vect-patterns.c (vect_recog_over_widening_pattern): Check
        that the last operation is a type demotion.

2012-01-12  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*zero_extendsidi2_rex64): Correct movl template.
        (x86_shift<mode>_adj_1): Remove operand constraint from operand 3.

2012-01-11  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/51796
        * combine.c (distribute_notes): If i3 is a noreturn call,
        allow old_size to be equal to args_size and make sure the
        noreturn call gets REG_ARGS_SIZE note.
        * expr.c (fixup_args_size_notes): Put REG_ARGS_SIZE notes
        on noreturn calls even when the delta is 0.

2012-01-11  Nathan Sidwell  <nathan@acm.org>

        * gcov.c (STRING_SIZE): Remove.
        (generate_results): Erase annotations for source files with no
        coverage information.
        (read_line): New.
        (output_lines): Use it.

2012-01-11  Eric Botcazou  <ebotcazou@adacore.com>

        * gimple.h (gimplify_body): Remove first argument.
        * gimplify.c (copy_if_shared): Add DATA argument.  Do not create the
        pointer set here, instead just pass DATA to walk_tree.
        (unshare_body): Remove BODY_P argument and adjust.  Create the pointer
        set here and invoke copy_if_shared on the size trees of DECL_RESULT.
        (unvisit_body): Likewise, but with unmark_visited.
        (gimplify_body): Remove BODY_P argument and adjust.
        (gimplify_function_tree): Adjust call to gimplify_body.
        * omp-low.c (finalize_task_copyfn): Likewise.

2012-01-11  Eric Botcazou  <ebotcazou@adacore.com>

        * tree.h (build_function_decl_skip_args): Add boolean parameter.
        (build_function_type_skip_args): Delete.
        * tree.c (build_function_type_skip_args): Make static and add
        SKIP_RETURN parameter.  Fix thinko in the handling of variants.
        (build_function_decl_skip_args): Add SKIP_RETURN parameter and
        pass it to build_function_type_skip_args.
        * cgraph.h (cgraph_function_versioning): Add boolean parameter.
        (tree_function_versioning): Likewise.
        * cgraph.c (cgraph_create_virtual_clone): Adjust call to
        build_function_decl_skip_args.
        * cgraphunit.c (cgraph_function_versioning): Add SKIP_RETURN parameter
        and pass it to build_function_decl_skip_args/tree_function_versioning.
        (cgraph_materialize_clone): Adjust call to tree_function_versioning.
        * ipa-inline-transform.c (save_inline_function_body): Likewise.
        * trans-mem.c (ipa_tm_create_version): Likewise.
        * tree-sra.c (modify_function): Ditto for cgraph_function_versioning.
        * tree-inline.c (declare_return_variable): Remove always-true test.
        (tree_function_versioning): Add SKIP_RETURN parameter.  If the function
        returns non-void and SKIP_RETURN, create a void-typed RESULT_DECL.
        * ipa-split.c (split_function): Skip the return value for the split
        part if it doesn't return.

2012-01-11  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

        PR tree-optimization/49642
        * ipa-split.c (forbidden_dominators): New variable.
        (check_forbidden_calls): New function.
        (dominated_by_forbidden): Likewise.
        (consider_split): Check for forbidden dominators.
        (execute_split_functions): Initialize and free forbidden
        dominators info; call check_forbidden_calls.

2012-01-11  Matthew Gretton-Dann  <matthew.gretton-dann@arm.com>

        * config/arm/arm.md (mov_notscc): Use MVN for false condition.

2012-01-11  Nick Clifton  <nickc@redhat.com>

        * config/rx/rx.md (return): Define pattern.

2012-01-11  Richard Guenther  <rguenther@suse.de>

        * doc/extend.texi (malloc attribute): Adjust according to
        implementation.

2012-01-10  Aldy Hernandez  <aldyh@redhat.com>
            Patrick Marlier  <patrick.marlier@gmail.com>

        PR middle-end/51516
        * trans-mem.c (get_cg_data): Traverse aliases if requested.
        (ipa_tm_scan_calls_block): Update parameters to get_cg_data.
        (ipa_tm_note_irrevocable): Same.
        (ipa_tm_scan_irr_block): Same.
        (ipa_tm_decrement_clone_counts): Same.
        (ipa_tm_scan_irr_function): Same.
        (ipa_tm_create_version_alias): Same.
        (ipa_tm_create_version): Same.
        (ipa_tm_transform_calls_redirect): Same.
        (ipa_tm_transform_calls): Same.
        (ipa_tm_transform_transaction): Same.
        (ipa_tm_execute): Same.

2012-01-10  Richard Guenther  <rguenther@suse.de>

        PR middle-end/51806
        * opts.c (common_handle_option): Handle -Werror.

2012-01-10  Andreas Schwab  <schwab@linux-m68k.org>

        * config/m68k/sync.md ("atomic_compare_and_swap<mode>_1"): Fix
        operand number.

2012-01-10  Jason Merrill  <jason@redhat.com>

        * doc/invoke.texi (C++ Dialect Options): Update -fabi-version=6
        information.

2012-01-10  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * configure.ac (gcc_cv_as_ix86_tlsgdplt): Check if linker
        supports R_386_TLS_GD_PLT reloc.
        (gcc_cv_as_ix86_tlsldmplt): Check if linker
        supports R_386_TLS_LDM_PLT reloc.
        * configure: Regenerate.
        * config.in: Regenerate.

2012-01-10  Georg-Johann Lay  <avr@gjlay.de>

        PR target/49868
        Extend __pgmx semantics to linearize memory.
        * config/avr/avr.md (mov<mode>): Use avr_xload_libgcc_p to
        determine if code comes inline or from libgcc.
        (MOVMEM_r_d:HI): Add "w" to constraint for better preference.
        (movmem_qi, movmem_qi): Set constraint #2 to "n".
        (movmem_qi_elpm, movmem_hi_elpm): Remove insns.
        (movmemx_qi, movmemx_hi): New insns.
        (xload_<mode>_libgcc): Rewrite to new insn condition.
        (xload_<mode>): Remove insns.
        * config/avr/avr.c (avr_out_xload): Rewrite: Only need to handle
        cases that don't satisfy avr_xload_libgcc_p().
        (avr_addr_space_convert): Allow converting in any direction.
        (avr_addr_space_subset_p): Return always true.
        (avr_xload_libgcc_p): Rewrite to fit new __pgmx semantics.
        (avr_emit_movmemhi): Ditto.
        (avr_out_lpm): No need to handle ADDR_SPACE_PGMX any more.
        (avr_out_movmem): Ditto.
        (AVR_SYMBOL_FLAG_PROGMEM): New macro.
        (AVR_SYMBOL_SET_ADDR_SPACE): New macro.
        (AVR_SYMBOL_GET_ADDR_SPACE): New macro.
        (avr_encode_section_info): Encode 'progmem' in symbol flags.
        (output_reload_in_const): Don't zero-extend any 24-bit symbols.

2012-01-10  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/50913
        * graphite-scop-detection.c (stmt_has_simple_data_refs_p):
        Require data-refs to be representable by Graphite with respect
        to any loop nest.

2012-01-10  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/constraints.md ("L"): Return true for 0xffffffff.
        * config/i386/i386.c (*anddi_1): Emit AND with 0xffffffff as MOV.

2012-01-10  Tom de Vries  <tom@codesourcery.com>

        PR rtl-optimization/51271
        * dwarf2cfi.c (scan_trace): Save and restore cur_row->reg_save when
        handling annulled branch.

2012-01-10  Richard Henderson  <rth@redhat.com>

        * config/arm/arm.c (arm_vectorize_vec_perm_const_ok,
        TARGET_VECTORIZE_VEC_PERM_CONST_OK, neon_split_vcombine, MAX_VECT_LEN,
        struct expand_vec_perm_d, arm_expand_vec_perm_1, arm_expand_vec_perm,
        arm_evpc_neon_vuzp, arm_evpc_neon_vzip, arm_evpc_neon_vrev,
        arm_evpc_neon_vtrn, arm_evpc_neon_vtbl, arm_expand_vec_perm_const_1,
        arm_expand_vec_perm_const): New.
        * config/arm/arm-protos.h: Update.
        * config/arm/neon.md (UNSPEC_VCONCAT): New.
        (*neon_vswp<VDQX>): New.
        (neon_vcombine<VDX>): Use neon_split_vcombine.
        (neon_vtbl1v16qi, neon_vtbl2v16qi, neon_vcombinev16qi): New.
        * config/arm/vec-common.md (vec_perm_const<VALL>): New.
        (vec_perm<VE>): New.

2012-01-10  Richard Henderson  <rth@redhat.com>

        * config/arm/arm.c (arm_gen_compare_reg): Add scratch argument;
        use it if reload_completed.
        (arm_legitimize_sync_memory, arm_emit, arm_insn_count, arm_count,
        arm_output_asm_insn, arm_process_output_memory_barrier,
        arm_output_memory_barrier, arm_ldrex_suffix, arm_output_ldrex,
        arm_output_strex, arm_output_it, arm_output_op2, arm_output_op3,
        arm_output_sync_loop, arm_get_sync_operand, FETCH_SYNC_OPERAND,
        arm_process_output_sync_insn, arm_output_sync_insn,
        arm_sync_loop_insns, arm_call_generator, arm_expand_sync): Remove.
        (arm_pre_atomic_barrier, arm_post_atomic_barrier): New.
        (arm_emit_load_exclusive, arm_emit_store_exclusive): New.
        (emit_unlikely_jump): New.
        (arm_expand_compare_and_swap, arm_split_compare_and_swap): New.
        (arm_split_atomic_op): New.
        * config/arm/arm-protos.h: Update.
        * config/arm/arm.h (enum arm_sync_generator_tag): Remove.
        (struct arm_sync_generator): Remove.
        * config/arm/arm.md (VUNSPEC_SYNC_COMPARE_AND_SWAP, VUNSPEC_SYNC_LOCK,
        VUNSPEC_SYNC_OP, VUNSPEC_SYNC_NEW_OP, VUNSPEC_SYNC_OLD_OP): Remove.
        (VUNSPEC_ATOMIC_CAS, VUNSPEC_ATOMIC_XCHG, VUNSPEC_ATOMIC_OP): New.
        (VUNSPEC_LL, VUNSPEC_SC): New.
        (sync_result, sync_memory, sync_required_value, sync_new_value,
        sync_t1, sync_t2, sync_release_barrier, sync_op): Remove.
        (attr length): Don't use arm_sync_loop_insns.
        (cbranch_cc, cstore_cc): Update call to arm_gen_compare_reg.
        (movsfcc, movdfcc): Likewise.
        * config/arm/constraints.md (Ua): New.
        * config/arm/prediates.md (mem_noofs_operand): New.
        (sync_compare_and_swap<QHSD>, sync_lock_test_and_set<QHSD>): Remove.
        (sync_clobber, sync_t2_reqd): Remove.
        (sync_<syncop><QHSD>, sync_nand<QHSD>): Remove.
        (sync_new_<syncop><QHSD>, sync_new_nand<QHSD>): Remove.
        (sync_old_<syncop><QHSD>, sync_old_nand<QHSD>): Remove.
        (arm_sync_compare_and_swap<SIDI>): Remove.
        (arm_sync_compare_and_swap<NARROW>): Remove.
        (arm_sync_lock_test_and_set<SIDI>): Remove.
        (arm_sync_lock_test_and_set<NARROW>): Remove.
        (arm_sync_new_<syncop><SIDI>): Remove.
        (arm_sync_new_<syncop><NARROW>): Remove.
        (arm_sync_new_nand<SIDI>): Remove.
        (arm_sync_new_nand<NARROW>): Remove.
        (arm_sync_old_<syncop><SIDI>): Remove.
        (arm_sync_old_<syncop><NARROW>): Remove.
        (arm_sync_old_nand<SIDI>): Remove.
        (arm_sync_old_nand<NARROW>): Remove.
        (*memory_barrier): Merge arm_output_memory_barrier.
        (atomic_compare_and_swap<QHSD>): New.
        (atomic_compare_and_swap<NARROW>_1): New.
        (atomic_compare_and_swap<SIDI>_1): New.
        (atomic_exchange<QHSD>): New.
        (cas_cmp_operand, cas_cmp_str): New.
        (atomic_op_operand, atomic_op_str): New.
        (atomic_<syncop><QHSD>, atomic_nand<QHSD>): New.
        (atomic_fetch_<syncop><QHSD>, atomic_fetch_nand<QHSD>): New.
        (atomic_<syncop>_fetch<QHSD>, atomic_nand_fetch<QHSD>): New.
        (arm_load_exclusive<NARROW>): New.
        (arm_load_exclusivesi, arm_load_exclusivedi): New.
        (arm_store_exclusive<QHSD>): New.

2012-01-09  Michael Meissner  <meissner@linux.vnet.ibm.com>

        * config/rs6000/rs6000.c (rs6000_init_hard_regno_mode_ok): Add DF
        reload patterns if -mvsx-scalar-memory.

        * config/rs6000/vsx.md (vsx_xscvspdp): Allow xscvspdp to be
        generated, even -mno-vsx-scalar-double was used.
        (vsx_xscvdpsp_scalar): Likewise.
        (vsx_xscvspdp_scalar2): Likewise.

2012-01-09  Tom de Vries  <tom@codesourcery.com>
            Andrew Pinski  <apinski@cavium.com>

        PR debug/51471
        * reorg.c (fill_slots_from_thread): Don't speculate
        frame-related insns.

2012-01-09  Richard Sandiford  <rdsandiford@googlemail.com>

        * sched-int.h (bb_note): Move to...
        * basic-block.h: ...here.
        * haifa-sched.c (bb_note): Move to...
        * cfgrtl.c: ...here.
        * function.c (next_block_for_reg): New function.
        (move_insn_for_shrink_wrap): Likewise.
        (prepare_shrink_wrap): Rewrite to use the above.

2012-01-09  Aldy Hernandez  <aldyh@redhat.com>

        * gimple.c (is_gimple_non_addressable): Remove.
        * gimple.h: Remove is_gimple_non_addressable.
        * gimplify.c (gimplify_modify_expr_rhs): Use is_gimple_reg instead of
        is_gimple_non_addressable.
        * trans-mem.c (expand_assign_tm): Same.

2012-01-09  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/51775
        * tree-ssa-sccvn.c (visit_use): Value-number throwing stmts.
        * tree-ssa-pre.c (eliminate): Properly fixup EH info.

2012-01-09  Matthew Gretton-Dann  <matthew.gretton-dann@arm.com>

        * config/arm/arm-cores.def (cortex-a15): Use cortex_a15_tune for
        tuning parameters.
        * config/arm/arm.c (arm_cortex_a15_tune): New static variable.

2012-01-09  Richard Guenther  <rguenther@suse.de>

        * tree-streamer-out.c (write_ts_optimization): Fix spelling.

2012-01-08  Jan Hubicka  <jh@suse.cz>

        PR tree-optimize/51680
        * ipa-inline-analyss.c (evaluate_properties_for_edge): Fix condition
        on when known_vals needs to be computed; cleanup.

2012-01-08  Jan Hubicka  <jh@suse.cz>

        PR tree-optimize/51694
        * ipa-cp.c (ipa_get_indirect_edge_target): Add bounds checks.

2012-01-08  Jonathan Wakely  <jwakely.gcc@gmail.com>

        * doc/cpp.texi (Predefined Macros): __STRICT_ANSI__ is defined
        for -std=c++98 and -std=c++11 too.

2012-01-08  Chung-Lin Tang  <cltang@codesourcery.com>

        * cfgloop.c (cancel_loop): Add free() of bbs array.

2012-01-07  Jan Hubicka  <jh@suse.cz>

        PR tree-optimization/51600
        * ipa-inline-analysis.c (estimate_edge_devirt_benefit): Disable code
        that benefits small functions.

2012-01-07  Jan Hubicka  <jh@suse.cz>

        * ipa-inline.c (want_inline_small_function_p): Fix formating.

2012-01-07  Jan Hubicka  <jh@suse.cz>

        PR tree-optimization/51680
        * ipa-inline.c (want_inline_small_function_p): Be more lax on functions
        whose inlining reduce unit size.

2012-01-07  Alexandre Oliva  <aoliva@redhat.com>

        PR bootstrap/51725
        * cselib.c (new_elt_loc_list): Promote addr_list to canonical node.
        Add canonical node to containing_mem chain after the non-canonical
        one, even if there weren't any locs to propagate.
        (remove_useless_values): Keep only canonical values.
        (add_mem_for_addr, cselib_lookup_mem): Canonicalize addr.
        (cselib_invalidate_mem): Likewise.  Ensure v is canonical, and
        canonicalize mem_chain elements that are not discarded.

2012-01-06  Jakub Jelinek  <jakub@redhat.com>

        PR target/47333
        * cgraphunit.c (cgraph_optimize): Call output_weakrefs
        before emitting functions.

        PR gcov-profile/50127
        * bb-reorder.c (partition_hot_cold_basic_blocks): Call
        clear_aux_for_blocks.

2012-01-06  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/51746
        * cselib.c (cselib_hash_rtx): Hash incoming VALUEs too.

2012-01-06  Arnaud Charlet  <charlet@adacore.com>

        * c-decl.c (ext_block): Moved up.
        (collect_all_refs, for_each_global_decl): Take ext_block into account.

2012-01-06  Han Shen  <shenhan@google.com>

        Translate built-in include paths for sysroot.
        * Makefile.in (gcc_gxx_include_dir_add_sysroot): New.
        (PREPROCESSOR_DEFINES): Define GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT.

        * cppdefault.c (cpp_include_defaults): Replace hard coded "0" with
        GPLUSPLUS_INCLUDE_DIR_ADD_SYSROOT for "add_sysroot" field.

        * configure.ac (AC_SUBST): Add gcc_gxx_include_dir_add_sysroot to
        control whether sysroot should be prepended to gxx include dir.

        * configure: Regenerate.

2012-01-06  Torvald Riegel  <triegel@redhat.com>

        PR rtl-optimization/51771
        * builtin-attrs.def (ATTR_RETURNS_TWICE, ATTR_TM_NOTHROW_RT_LIST): New.
        * gtm-builtins.def (BUILT_IN_TM_START): Add returns-twice attrib.

2012-01-05  Eric Botcazou  <ebotcazou@adacore.com>

        PR tree-optimization/51315
        * tree-sra.c (tree_non_aligned_mem_for_access_p): New predicate.
        (build_accesses_from_assign): Use it instead of tree_non_aligned_mem_p.

2012-01-05  Uros Bizjak  <ubizjak@gmail.com>

        PR target/51681
        * config/ia64/ia64.c (expand_vec_perm_shrp): Use correct operands
        for shrp pattern.  Correctly handle and fixup shift variable.
        Return false when shift > nelt for BYTES_BIG_ENDIAN target.

2012-01-05  Jakub Jelinek  <jakub@redhat.com>

        PR debug/51762
        * calls.c (emit_call_1): For noreturn calls force a REG_ARGS_SIZE
        note when !ACCUMULATE_OUTGOING_ARGS.

2012-01-05  Eric Botcazou  <ebotcazou@adacore.com>

        * tree-vrp.c (extract_range_from_binary_expr_1): Remove duplicated
        condition.
        (extract_range_from_unary_expr_1): Avoid useless computations.

2012-01-05  Jakub Jelinek  <jakub@redhat.com>

        PR rtl-optimization/51767
        * cfgrtl.c (force_nonfallthru_and_redirect): Force addition
        of jump_block and add an extra edge for degenerated asm gotos.

        PR middle-end/51768
        * stmt.c (check_unique_operand_names): Don't ICE during error
        reporting if i is from labels chain.

        PR middle-end/44777
        * profile.c (branch_prob): Split bbs that have exit edge
        and need a fake entry edge too.

2012-01-05  Jan Hubicka  <jh@suse.cz>

        PR middle-end/49710
        * cfgloopmanip.c (remove_path): Walk loop hiearchy upwards when
        unlooping loops.

2012-01-05  Richard Guenther  <rguenther@suse.de>

        PR lto/50490
        * tree-streamer-out.c (write_ts_optimization): New function.
        (streamer_write_tree_body): Call it.
        * tree-streamer-in.c (lto_input_ts_optimization): New function.
        (streamer_read_tree_body): Call it.
        * lto-streamer-out.c (lto_is_streamable): Handle OPTIMIZATION_NODE.

2012-01-05  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/51761
        * gimple.h (struct gimplify_ctx): Add in_cleanup_point_expr field.
        * gimplify.c (gimplify_cleanup_point_expr): Save and set
        in_cleanup_point_expr before gimplify_stmt call and restore it
        afterwards.
        (gimplify_target_expr): Don't add {CLOBBER} cleanup if
        in_cleanup_point_expr is false.

2012-01-05  Richard Guenther  <rguenther@suse.de>

        PR middle-end/51764
        * common.opt (Wmudflap, fmudflap, fmudflapth, fmudflapir): Move
        to c.opt.
        * toplev.c (process_options): Reject combining mudflap and LTO.
        * tree-nomudflap.c (nogo): Use sorry instead of internal_error.

2012-01-05  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/51760
        * tree-ssa-ccp.c (likely_value): Drop UNDEFINED to CONSTANT,
        not VARYING.
        (bit_value_unop): Handle UNDEFINED operands.
        (bit_value_binop): Likewise.

2012-01-05  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.c (avr_replace_prefix): Remove.
        (avr_asm_named_section): Use ACONCAT instead of avr_replace_prefix.
        (avr_asm_function_rodata_section): Ditto.
        (avr_asm_select_section): Ditto.

2012-01-05  Marcus Shawcroft  <marcus.shawcroft@arm.com>

        * reload.c (find_reloads): Adjust LABEL_NUSES on REG_LABEL_OPERAND
        insertion.

2012-01-05  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/51648
        * tree-cfg.c (need_fake_edge_p): Return true also for noreturn
        calls that have any non-fake successor edges.

        PR debug/51746
        * var-tracking.c (add_stores): For COND_EXEC allow oval to be NULL.

2012-01-04  Eric Botcazou  <ebotcazou@adacore.com>

        PR tree-optimization/51624
        * tree-sra.c (build_ref_for_model): When replicating a chain of
        COMPONENT_REFs, stop as soon as the offset would become negative.

2012-01-04  Jakub Jelinek  <jakub@redhat.com>

        PR debug/51695
        * dwarf2out.c (output_loc_list): For now drop >= 64KB expressions
        in .debug_loc on the floor.

2012-01-04  Andrew Pinski  <apinski@cavium.com>

        * doc/invoke.texi (-march=@var{arch}): Add octeon+ and octeon2.

2012-01-04  Andrew Pinski  <apinski@cavium.com>
            Adam Nemet  <anemet@caviumnetworks.com>

        * config/mips/mips.md (size): Add SI and DI.
        (SIZE): New mode attribute.
        (U): New code attribute.
        * config/mips/mips-dsp.md (mips_lbux): Use gen_mips_lbux_extsi.
        (mips_lbux_<mode>): Delete.
        (mips_l<SHORT:size><u>x_ext<GPR:mode>_<P:mode>): New pattern.
        (mips_lhx): Use gen_mips_lhx_extsi.
        (mips_lhx_<mode>): Delete.
        (mips_lwx): Delete.
        (mips_l<size>x): New expand.
        (mips_lwx_<mode>): Delete.
        (mips_l<GPR:size>x_<P:mode>): New pattern.
        (*mips_lw<u>x_<P:mode>_ext): Likewise.
        * config/mips/mips-ftypes.def: Add DI f(POINTER, SI) function type.
        * config/mips/mips.c (mips_lx_address_p): New function.
        (mips_rtx_costs <case MEM>): Call mips_lx_address_p.
        (dsp64): New availability predicate.
        (mips_builtins): Add an entry for __builtin_mips_ldx.
        * config/mips/mips.h (ISA_HAS_LBX): New define.
        (ISA_HAS_LBUX): Likewise.
        (ISA_HAS_LHX): Likewise.
        (ISA_HAS_LHUX): Likewise.
        (ISA_HAS_LWX): Likewise.
        (ISA_HAS_LWUX): Likewise.
        (ISA_HAS_LDX): Likewise.
        * doc/extend.texi (__builtin_mips_ldx): Document.

2012-01-04  Tristan Gingold  <gingold@adacore.com>

        * config/vms/xm-vms.h (HOST_LONG_FORMAT, HOST_PTR_PRINTF): Define
        when long pointers are used.
        * config.build (*-*-*vms*): Handle all OpenVMS targets.
        (alpha64-dec-*vms*, alpha*-dec-*vms*)
        (ia64-hp-*vms*): Remove.
        * config/vms/xm-vms64.h: Delete.

2012-01-04  Aldy Hernandez  <aldyh@redhat.com>

        PR middle-end/51472
        * trans-mem.c (expand_assign_tm): Handle TM_MEMMOVE loads correctly.

2012-01-04  Aldy Hernandez  <aldyh@redhat.com>

        * opts.c (finish_options): Remove duplicate sorry.

2012-01-04  Aldy Hernandez  <aldyh@redhat.com>

        PR middle-end/51696
        * trans-mem.c (diagnose_tm_1): Display indirect calls with no name
        correctly.

2012-01-04  Richard Guenther  <rguenther@suse.de>

        PR middle-end/51750
        * tree.c (size_low_cst): New function.
        * tree.h (size_low_cst): Declare.
        * fold-const.c (fold_comparison): Use it to extract the low
        part of the POINTER_PLUS_EXPR offset.

2012-01-04  Georg-Johann Lay  <avr@gjlay.de>

        Fix clearing ZERO_REG
        * config/avr/avr.md (cc): Add alternative "ldi".
        (movqi_insn): Use it in cc attribute.
        * config/avr/avr.c (notice_update_cc): Handle CC_LDI.
        (output_reload_in_const): Use CLR to move 0 to ZERO_REG.
        (output_reload_insisf): Use ZERO_REG to pre-clear register.

2012-01-04  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * configure: Regenerate.

2012-01-04  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/49651
        * tree-ssa-structalias.c (type_can_have_subvars): New function.
        (var_can_have_subvars): Use it.
        (get_constraint_for_1): Only consider subfields if there can be any.

2012-01-03  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/51725
        * cselib.c (new_elt_loc_list): When moving locs from one cselib_val
        to its new canonical_cselib_val and the cselib_val was in
        first_containing_mem chain, but the canonical_cselib_val was not,
        add the latter into the chain.
        (cselib_invalidate_mem): Compare canonical_cselib_val of
        addr_list chain elt with v.

        PR pch/51722
        * dwarf2out.c (dwarf2out_start_source_file, dwarf2out_define,
        dwarf2out_undef): Allocate e.info using ggc_strdup instead
        of xstrdup.
        (output_macinfo_op): Don't ggc_strdup fd->filename.
        (optimize_macinfo_range): Allocate grp_name using XALLOCAVEC,
        then ggc_strdup it.  Don't free inc->info or cur->info.
        (output_macinfo): Don't free ref->info or file->info.

2012-01-03  Ira Rosen  <irar@il.ibm.com>

        PR tree-optimization/51269
        * tree-vect-loop-manip.c (set_prologue_iterations): Make
        first_niters a pointer.
        (slpeel_tree_peel_loop_to_edge): Likewise.
        (vect_do_peeling_for_loop_bound): Update call to
        slpeel_tree_peel_loop_to_edge.
        (vect_gen_niters_for_prolog_loop): Don't compute wide_prolog_niters
        here.  Remove it from the parameters list.
        (vect_do_peeling_for_alignment): Update calls and compute
        wide_prolog_niters.

2012-01-03  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/51070
        * tree-loop-distribution.c (stmt_has_scalar_dependences_outside_loop):
        Properly handle calls.

2012-01-03  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/51692
        * tree-ssa-dce.c (eliminate_unnecessary_stmts): Do not remove
        the LHS of allocation stmts.

2012-01-03  Olivier Hainque  <hainque@adacore.com>

        * system.h: Prior to #define, #undef fopen and freopen unconditionally.

2012-01-03  Olivier Hainque  <hainque@adacore.com>

        * collect2.c (main): In AIX specific computations for vector
        insertions, use CONST_CAST2 to cast from char ** to const char **.

2012-01-03  Richard Guenther  <rguenther@suse.de>

        PR debug/51650
        * dwarf2out.c (dwarf2out_finish): Always create a DIE for
        the context of a limbo DIE when it does not already exist.

2012-01-03  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/51719
        * value-prof.c (gimple_ic): When indirect call isn't noreturn,
        but direct call is, clear direct call's lhs and don't add fallthrough
        edge from dcall_bb to join_bb and PHIs.

2012-01-03  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * config/s390/s390.md ("*cmp<mode>_ccs"): Fix comment mentioning
        the instructions emitted by the pattern.
        ("*TDC_insn_<mode>"): Add comment.

2012-01-03  Richard Guenther  <rguenther@suse.de>

        PR middle-end/51730
        * fold-const.c (fold_comparison): Properly canonicalize
        tree offset and HOST_WIDE_INT bit position.

2012-01-02  Uros Bizjak  <ubizjak@gmail.com>

        * config/ia64/ia64.c (expand_vec_perm_broadcast): Use correct
        operands for extzv pattern.

2012-01-02  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/51725
        * cselib.c (add_mem_for_addr): Call canonical_cselib_val
        on mem_elt first.

2012-01-02  Sandra Loosemore  <sandra@codesourcery.com>

        * doc/invoke.texi (-flto and related options): Copy-edit.

2012-01-02  Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/mips.md (loadgp_newabi_<mode>): Add missing earlyclobber.

2012-01-02  Jakub Jelinek  <jakub@redhat.com>

        * config/i386/sse.md (*avx2_gatherdi<mode>_3, *avx2_gatherdi<mode>_4):
        New patterns.

2012-01-02  Richard Sandiford  <rdsandiford@googlemail.com>

        * expr.h (move_by_pieces_ninsns): Declare.
        * expr.c (move_by_pieces_ninsns): Make external.
        * config/mips/mips-protos.h (mips_move_by_pieces_p): Declare.
        (mips_store_by_pieces_p): Likewise.
        * config/mips/mips.h (MOVE_BY_PIECES_P): Call mips_move_by_pieces_p.
        (STORE_BY_PIECES_P): Likewise mips_store_by_pieces_p.
        * config/mips/mips.c (mips_move_by_pieces_p): New function.
        (mips_store_by_pieces_p): Likewise.

2012-01-02  Jakub Jelinek  <jakub@redhat.com>

        * passes.c (register_one_dump_file): Free full_name.

        * reload1.c (reload): Don't allocate reg_max_ref_width here.
        (calculate_elim_costs_all_insns): Free offsets_at and
        offsets_known_at at the end and clear the pointers.

2012-01-02  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.opt (-mbranch-cost): Fix double definition of
        this option introduced in r180739.

2012-01-02  Georg-Johann Lay  <avr@gjlay.de>

        PR target/51345
        * config.gcc (tm_file target=avr]): Add avr/avr-multilib.h
        (tmake_file target=avr): Add avr/t-multilib.

        * config/avr/avr-c.c (avr_cpu_cpp_builtins): Use AVR_HAVE_8BIT_SP
        to built-in define __AVR_HAVE_8BIT_SP__, __AVR_HAVE_16BIT_SP__.
        * config/avr/genmultilib.awk: New file.
        * config/avr/t-multilib: New auto-generated file.
        * config/avr/multilib.h: New auto-generated file.
        * config/avr/t-avr (AVR_MCUS): New variable.
        (genopt.sh): Use it.
        (s-mlib): Depend on t-multilib.
        (t-multilib, multilib.h): New dependencies.
        (s-avr-mlib): New rule to build t-multilib, multilib.h from AVR_MCUS.
        (MULTILIB_OPTIONS): Remove.
        (MULTILIB_MATCHES): Remove.
        (MULTILIB_DIRNAMES): Remove.
        (MULTILIB_EXCEPTIONS): Remove:
        * config/avr/genopt.sh: Don't use hard coded file name;
        pass AVR_MCUS from t-avr instead.

2012-01-02  Georg-Johann Lay  <avr@gjlay.de>

        * config/avr/avr.c (avr_out_ashrpsi3): Fix "case 31" to "case 23".

2012-01-02  Georg-Johann Lay  <avr@gjlay.de>

        Implement light-weight DImode support.
        * config/avr/avr-dimode.md: New file.
        * config/avr/avr.md: Include it.
        (adjust_len): Add plus64, compare64.
        (HIDI): Remove code iterator.
        (code_stdname): New code attribute.
        (rotx, rotsmode): Remove DI.
        (rotl<mode>3, *rotw<mode>, *rotb<mode>): Use HISI instead of HIDI
        as code iterator.
        * config/avr/avr-protos.h (avr_have_dimode): New.
        (avr_out_plus64, avr_out_compare64): New.
        * config/avr/avr.c (avr_out_compare): Handle DImode.
        (avr_have_dimode): New variable definition and initialization.
        (avr_out_compare64, avr_out_plus64): New functions.
        (avr_out_plus_1): Use simplify_unary_operation to negate xval.
        (adjust_insn_length): Handle ADJUST_LEN_COMPARE64, ADJUST_LEN_PLUS64.
        (avr_compare_pattern): Skip DImode comparisons.

2012-01-02  Revital Eres  <revital.eres@linaro.org>

        * ddg.c (def_has_ccmode_p): New function.
        (add_cross_iteration_register_deps,
        create_ddg_dep_from_intra_loop_link): Call it.

2012-01-02  Richard Guenther  <rguenther@suse.de>

        PR other/51679
        * invoke.texi (fassociative-math): Remove spurious paranthesis.

2012-01-01  Jakub Jelinek  <jakub@redhat.com>

        * gcc.c (process_command): Update copyright notice dates.
        * gcov.c (print_version): Likewise.
        * gcov-dump.c (print_version): Likewise.
        * mips-tfile.c (main): Likewise.
        * mips-tdump.c (main): Likewise.

2012-01-01  Ira Rosen  <irar@il.ibm.com>

        PR tree-optimization/51704
        * tree-vect-slp.c (vect_detect_hybrid_slp_stmts): Check that
        a use is inside the basic block or loop before accessing its vect info.

2012-01-01  Jan Hubicka  <jhjh@suse.cz>

        PR rtl-optimization/51069
        * cfgloopmanip.c (remove_path): Removing path making irreducible
        region unconditional makes BB part of the region.

2012-01-01  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/51683
        * tree-ssa-propagate.c (substitute_and_fold): Don't optimize away
        calls with side-effects.
        * tree-ssa-ccp.c (ccp_fold_stmt): Likewise.
\f
Copyright (C) 2012 Free Software Foundation, Inc.

Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.