gcc/params.def

   1 /* params.def - Run-time parameters.
   2    Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
   3    2011, 2012
   4    Free Software Foundation, Inc.
   5    Written by Mark Mitchell <mark@codesourcery.com>.
   6
   7 This file is part of GCC.
   8
   9 GCC is free software; you can redistribute it and/or modify it under
  10 the terms of the GNU General Public License as published by the Free
  11 Software Foundation; either version 3, or (at your option) any later
  12 version.
  13
  14 GCC is distributed in the hope that it will be useful, but WITHOUT ANY
  15 WARRANTY; without even the implied warranty of MERCHANTABILITY or
  16 FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  17 for more details.
  18
  19 You should have received a copy of the GNU General Public License
  20 along with GCC; see the file COPYING3.  If not see
  21 <http://www.gnu.org/licenses/>.  */
  22
  23 /* This file contains definitions for language-independent
  24    parameters.  The DEFPARAM macro takes 6 arguments:
  25
  26      - The enumeral corresponding to this parameter.
  27
  28      - The name that can be used to set this parameter using the
  29        command-line option `--param <name>=<value>'.
  30
  31      - A help string explaining how the parameter is used.
  32
  33      - A default value for the parameter.
  34
  35      - The minimum acceptable value for the parameter.
  36
  37      - The maximum acceptable value for the parameter (if greater than
  38      the minimum).
  39
  40    Be sure to add an entry to invoke.texi summarizing the parameter.  */
  41
  42 /* When branch is predicted to be taken with probability lower than this
  43    threshold (in percent), then it is considered well predictable. */
  44 DEFPARAM (PARAM_PREDICTABLE_BRANCH_OUTCOME,
  45           "predictable-branch-outcome",
  46           "Maximal estimated outcome of branch considered predictable",
  47           2, 0, 50)
  48
  49 /* The single function inlining limit. This is the maximum size
  50    of a function counted in internal gcc instructions (not in
  51    real machine instructions) that is eligible for inlining
  52    by the tree inliner.
  53    The default value is 450.
  54    Only functions marked inline (or methods defined in the class
  55    definition for C++) are affected by this.
  56    There are more restrictions to inlining: If inlined functions
  57    call other functions, the already inlined instructions are
  58    counted and once the recursive inline limit (see
  59    "max-inline-insns" parameter) is exceeded, the acceptable size
  60    gets decreased.  */
  61 DEFPARAM (PARAM_MAX_INLINE_INSNS_SINGLE,
  62           "max-inline-insns-single",
  63           "The maximum number of instructions in a single function eligible for inlining",
  64           400, 0, 0)
  65
  66 /* The single function inlining limit for functions that are
  67    inlined by virtue of -finline-functions (-O3).
  68    This limit should be chosen to be below or equal to the limit
  69    that is applied to functions marked inlined (or defined in the
  70    class declaration in C++) given by the "max-inline-insns-single"
  71    parameter.
  72    The default value is 40.  */
  73 DEFPARAM (PARAM_MAX_INLINE_INSNS_AUTO,
  74           "max-inline-insns-auto",
  75           "The maximum number of instructions when automatically inlining",
  76           40, 0, 0)
  77
  78 DEFPARAM (PARAM_MAX_INLINE_INSNS_RECURSIVE,
  79           "max-inline-insns-recursive",
  80           "The maximum number of instructions inline function can grow to via recursive inlining",
  81           450, 0, 0)
  82
  83 DEFPARAM (PARAM_MAX_INLINE_INSNS_RECURSIVE_AUTO,
  84           "max-inline-insns-recursive-auto",
  85           "The maximum number of instructions non-inline function can grow to via recursive inlining",
  86           450, 0, 0)
  87
  88 DEFPARAM (PARAM_MAX_INLINE_RECURSIVE_DEPTH,
  89           "max-inline-recursive-depth",
  90           "The maximum depth of recursive inlining for inline functions",
  91           8, 0, 0)
  92
  93 DEFPARAM (PARAM_MAX_INLINE_RECURSIVE_DEPTH_AUTO,
  94           "max-inline-recursive-depth-auto",
  95           "The maximum depth of recursive inlining for non-inline functions",
  96           8, 0, 0)
  97
  98 DEFPARAM (PARAM_MIN_INLINE_RECURSIVE_PROBABILITY,
  99           "min-inline-recursive-probability",
 100           "Inline recursively only when the probability of call being executed exceeds the parameter",
 101           10, 0, 0)
 102
 103 /* Limit of iterations of early inliner.  This basically bounds number of
 104    nested indirect calls early inliner can resolve.  Deeper chains are still
 105    handled by late inlining.  */
 106 DEFPARAM (PARAM_EARLY_INLINER_MAX_ITERATIONS,
 107           "max-early-inliner-iterations",
 108           "The maximum number of nested indirect inlining performed by early inliner",
 109           10, 0, 0)
 110
 111 /* Limit on probability of entry BB.  */
 112 DEFPARAM (PARAM_COMDAT_SHARING_PROBABILITY,
 113           "comdat-sharing-probability",
 114           "Probability that COMDAT function will be shared with different compilation unit",
 115           20, 0, 0)
 116
 117 /* Limit on probability of entry BB.  */
 118 DEFPARAM (PARAM_PARTIAL_INLINING_ENTRY_PROBABILITY,
 119           "partial-inlining-entry-probability",
 120           "Maximum probability of the entry BB of split region (in percent relative to entry BB of the function) to make partial inlining happen",
 121           70, 0, 0)
 122
 123 /* Limit the number of expansions created by the variable expansion
 124    optimization to avoid register pressure.  */
 125 DEFPARAM (PARAM_MAX_VARIABLE_EXPANSIONS,
 126           "max-variable-expansions-in-unroller",
 127           "If -fvariable-expansion-in-unroller is used, the maximum number of times that an individual variable will be expanded during loop unrolling",
 128           1, 0, 0)
 129
 130 /* Limit loop autovectorization to loops with large enough iteration count.  */
 131 DEFPARAM (PARAM_MIN_VECT_LOOP_BOUND,
 132           "min-vect-loop-bound",
 133           "If -ftree-vectorize is used, the minimal loop bound of a loop to be considered for vectorization",
 134           1, 1, 0)
 135
 136 /* The maximum number of instructions to consider when looking for an
 137    instruction to fill a delay slot.  If more than this arbitrary
 138    number of instructions is searched, the time savings from filling
 139    the delay slot will be minimal so stop searching.  Increasing
 140    values mean more aggressive optimization, making the compile time
 141    increase with probably small improvement in executable run time.  */
 142 DEFPARAM (PARAM_MAX_DELAY_SLOT_INSN_SEARCH,
 143           "max-delay-slot-insn-search",
 144           "The maximum number of instructions to consider to fill a delay slot",
 145           100, 0, 0)
 146
 147 /* When trying to fill delay slots, the maximum number of instructions
 148    to consider when searching for a block with valid live register
 149    information.  Increasing this arbitrarily chosen value means more
 150    aggressive optimization, increasing the compile time.  This
 151    parameter should be removed when the delay slot code is rewritten
 152    to maintain the control-flow graph.  */
 153 DEFPARAM(PARAM_MAX_DELAY_SLOT_LIVE_SEARCH,
 154          "max-delay-slot-live-search",
 155          "The maximum number of instructions to consider to find accurate live register information",
 156          333, 0, 0)
 157
 158 /* This parameter limits the number of branch elements that the
 159    scheduler will track anti-dependencies through without resetting
 160    the tracking mechanism.  Large functions with few calls or barriers
 161    can generate lists containing many 1000's of dependencies.  Generally
 162    the compiler either uses all available memory, or runs for far too long.  */
 163 DEFPARAM(PARAM_MAX_PENDING_LIST_LENGTH,
 164          "max-pending-list-length",
 165          "The maximum length of scheduling's pending operations list",
 166          32, 0, 0)
 167
 168 /* This parameter limits the number of backtracking attempts when using the
 169    haifa scheduler for modulo scheduling.  */
 170 DEFPARAM(PARAM_MAX_MODULO_BACKTRACK_ATTEMPTS,
 171          "max-modulo-backtrack-attempts",
 172          "The maximum number of backtrack attempts the scheduler should make when modulo scheduling a loop",
 173          40, 0, 0)
 174
 175 DEFPARAM(PARAM_LARGE_FUNCTION_INSNS,
 176          "large-function-insns",
 177          "The size of function body to be considered large",
 178          2700, 0, 0)
 179 DEFPARAM(PARAM_LARGE_FUNCTION_GROWTH,
 180          "large-function-growth",
 181          "Maximal growth due to inlining of large function (in percent)",
 182          100, 0, 0)
 183 DEFPARAM(PARAM_LARGE_UNIT_INSNS,
 184          "large-unit-insns",
 185          "The size of translation unit to be considered large",
 186          10000, 0, 0)
 187 DEFPARAM(PARAM_INLINE_UNIT_GROWTH,
 188          "inline-unit-growth",
 189          "How much can given compilation unit grow because of the inlining (in percent)",
 190          30, 0, 0)
 191 DEFPARAM(PARAM_IPCP_UNIT_GROWTH,
 192          "ipcp-unit-growth",
 193          "How much can given compilation unit grow because of the interprocedural constant propagation (in percent)",
 194          10, 0, 0)
 195 DEFPARAM(PARAM_EARLY_INLINING_INSNS,
 196          "early-inlining-insns",
 197          "Maximal estimated growth of function body caused by early inlining of single call",
 198          11, 0, 0)
 199 DEFPARAM(PARAM_LARGE_STACK_FRAME,
 200          "large-stack-frame",
 201          "The size of stack frame to be considered large",
 202          256, 0, 0)
 203 DEFPARAM(PARAM_STACK_FRAME_GROWTH,
 204          "large-stack-frame-growth",
 205          "Maximal stack frame growth due to inlining (in percent)",
 206          1000, 0, 0)
 207
 208 /* The GCSE optimization will be disabled if it would require
 209    significantly more memory than this value.  */
 210 DEFPARAM(PARAM_MAX_GCSE_MEMORY,
 211          "max-gcse-memory",
 212          "The maximum amount of memory to be allocated by GCSE",
 213          50 * 1024 * 1024, 0, 0)
 214
 215 /* The GCSE optimization of an expression will avoided if the ratio of
 216    insertions to deletions is greater than this value.  */
 217 DEFPARAM(PARAM_MAX_GCSE_INSERTION_RATIO,
 218          "max-gcse-insertion-ratio",
 219          "The maximum ratio of insertions to deletions of expressions in GCSE",
 220          20, 0, 0)
 221
 222 /* This is the threshold ratio when to perform partial redundancy
 223    elimination after reload. We perform partial redundancy elimination
 224    when the following holds:
 225    (Redundant load execution count)
 226    ------------------------------- >= GCSE_AFTER_RELOAD_PARTIAL_FRACTION
 227    (Added loads execution count)                                          */
 228 DEFPARAM(PARAM_GCSE_AFTER_RELOAD_PARTIAL_FRACTION,
 229         "gcse-after-reload-partial-fraction",
 230         "The threshold ratio for performing partial redundancy elimination after reload",
 231         3, 0, 0)
 232 /* This is the threshold ratio of the critical edges execution count compared to
 233    the redundant loads execution count that permits performing the load
 234    redundancy elimination in gcse after reload.  */
 235 DEFPARAM(PARAM_GCSE_AFTER_RELOAD_CRITICAL_FRACTION,
 236         "gcse-after-reload-critical-fraction",
 237         "The threshold ratio of critical edges execution count that permit performing redundancy elimination after reload",
 238         10, 0, 0)
 239
 240 /* GCSE will use GCSE_COST_DISTANCE_RATION as a scaling factor
 241    to calculate maximum distance for which an expression is allowed to move
 242    from its rtx_cost.  */
 243 DEFPARAM(PARAM_GCSE_COST_DISTANCE_RATIO,
 244          "gcse-cost-distance-ratio",
 245          "Scaling factor in calculation of maximum distance an expression can be moved by GCSE optimizations",
 246          10, 0, 0)
 247 /* GCSE won't restrict distance for which an expression with rtx_cost greater
 248    than COSTS_N_INSN(GCSE_UNRESTRICTED_COST) is allowed to move.  */
 249 DEFPARAM(PARAM_GCSE_UNRESTRICTED_COST,
 250          "gcse-unrestricted-cost",
 251          "Cost at which GCSE optimizations will not constraint the distance an expression can travel",
 252          3, 0, 0)
 253
 254 /* How deep from a given basic block the dominator tree should be searched
 255    for expressions to hoist to the block.  The value of 0 will avoid limiting
 256    the search.  */
 257 DEFPARAM(PARAM_MAX_HOIST_DEPTH,
 258          "max-hoist-depth",
 259          "Maximum depth of search in the dominator tree for expressions to hoist",
 260          30, 0, 0)
 261
 262 /* This parameter limits the number of insns in a loop that will be unrolled,
 263    and by how much the loop is unrolled.
 264
 265    This limit should be at most half of the peeling limits:  loop unroller
 266    decides to not unroll loops that iterate fewer than 2*number of allowed
 267    unrollings and thus we would have loops that are neither peeled or unrolled
 268    otherwise.  */
 269 DEFPARAM(PARAM_MAX_UNROLLED_INSNS,
 270          "max-unrolled-insns",
 271          "The maximum number of instructions to consider to unroll in a loop",
 272          200, 0, 0)
 273 /* This parameter limits how many times the loop is unrolled depending
 274    on number of insns really executed in each iteration.  */
 275 DEFPARAM(PARAM_MAX_AVERAGE_UNROLLED_INSNS,
 276          "max-average-unrolled-insns",
 277          "The maximum number of instructions to consider to unroll in a loop on average",
 278          80, 0, 0)
 279 /* The maximum number of unrollings of a single loop.  */
 280 DEFPARAM(PARAM_MAX_UNROLL_TIMES,
 281         "max-unroll-times",
 282         "The maximum number of unrollings of a single loop",
 283         8, 0, 0)
 284 /* The maximum number of insns of a peeled loop.  */
 285 DEFPARAM(PARAM_MAX_PEELED_INSNS,
 286         "max-peeled-insns",
 287         "The maximum number of insns of a peeled loop",
 288         400, 0, 0)
 289 /* The maximum number of peelings of a single loop.  */
 290 DEFPARAM(PARAM_MAX_PEEL_TIMES,
 291         "max-peel-times",
 292         "The maximum number of peelings of a single loop",
 293         16, 0, 0)
 294 /* The maximum number of insns of a peeled loop.  */
 295 DEFPARAM(PARAM_MAX_COMPLETELY_PEELED_INSNS,
 296         "max-completely-peeled-insns",
 297         "The maximum number of insns of a completely peeled loop",
 298         400, 0, 0)
 299 /* The maximum number of peelings of a single loop that is peeled completely.  */
 300 DEFPARAM(PARAM_MAX_COMPLETELY_PEEL_TIMES,
 301         "max-completely-peel-times",
 302         "The maximum number of peelings of a single loop that is peeled completely",
 303         16, 0, 0)
 304 /* The maximum number of insns of a peeled loop that rolls only once.  */
 305 DEFPARAM(PARAM_MAX_ONCE_PEELED_INSNS,
 306         "max-once-peeled-insns",
 307         "The maximum number of insns of a peeled loop that rolls only once",
 308         400, 0, 0)
 309 /* The maximum depth of a loop nest we completely peel.  */
 310 DEFPARAM(PARAM_MAX_UNROLL_ITERATIONS,
 311          "max-completely-peel-loop-nest-depth",
 312          "The maximum depth of a loop nest we completely peel",
 313          8, 0, 0)
 314
 315 /* The maximum number of insns of an unswitched loop.  */
 316 DEFPARAM(PARAM_MAX_UNSWITCH_INSNS,
 317         "max-unswitch-insns",
 318         "The maximum number of insns of an unswitched loop",
 319         50, 0, 0)
 320 /* The maximum level of recursion in unswitch_single_loop.  */
 321 DEFPARAM(PARAM_MAX_UNSWITCH_LEVEL,
 322         "max-unswitch-level",
 323         "The maximum number of unswitchings in a single loop",
 324         3, 0, 0)
 325
 326 /* The maximum number of iterations of a loop the brute force algorithm
 327    for analysis of # of iterations of the loop tries to evaluate.  */
 328 DEFPARAM(PARAM_MAX_ITERATIONS_TO_TRACK,
 329         "max-iterations-to-track",
 330         "Bound on the number of iterations the brute force # of iterations analysis algorithm evaluates",
 331         1000, 0, 0)
 332 /* A cutoff to avoid costly computations of the number of iterations in
 333    the doloop transformation.  */
 334 DEFPARAM(PARAM_MAX_ITERATIONS_COMPUTATION_COST,
 335         "max-iterations-computation-cost",
 336         "Bound on the cost of an expression to compute the number of iterations",
 337         10, 0, 0)
 338
 339 /* This parameter is used to tune SMS MAX II calculations.  */
 340 DEFPARAM(PARAM_SMS_MAX_II_FACTOR,
 341          "sms-max-ii-factor",
 342          "A factor for tuning the upper bound that swing modulo scheduler uses for scheduling a loop",
 343          100, 0, 0)
 344 /* The minimum value of stage count that swing modulo scheduler will generate.  */
 345 DEFPARAM(PARAM_SMS_MIN_SC,
 346         "sms-min-sc",
 347         "The minimum value of stage count that swing modulo scheduler will generate.",
 348         2, 1, 1)
 349 DEFPARAM(PARAM_SMS_DFA_HISTORY,
 350          "sms-dfa-history",
 351          "The number of cycles the swing modulo scheduler considers when checking conflicts using DFA",
 352          0, 0, 0)
 353 DEFPARAM(PARAM_SMS_LOOP_AVERAGE_COUNT_THRESHOLD,
 354          "sms-loop-average-count-threshold",
 355          "A threshold on the average loop count considered by the swing modulo scheduler",
 356          0, 0, 0)
 357
 358 DEFPARAM(HOT_BB_COUNT_FRACTION,
 359          "hot-bb-count-fraction",
 360          "Select fraction of the maximal count of repetitions of basic block in program given basic block needs to have to be considered hot",
 361          10000, 0, 0)
 362 DEFPARAM(HOT_BB_FREQUENCY_FRACTION,
 363          "hot-bb-frequency-fraction",
 364          "Select fraction of the maximal frequency of executions of basic block in function given basic block needs to have to be considered hot",
 365          1000, 0, 0)
 366
 367 DEFPARAM (PARAM_ALIGN_THRESHOLD,
 368           "align-threshold",
 369           "Select fraction of the maximal frequency of executions of basic block in function given basic block get alignment",
 370           100, 0, 0)
 371
 372 DEFPARAM (PARAM_ALIGN_LOOP_ITERATIONS,
 373           "align-loop-iterations",
 374           "Loops iterating at least selected number of iterations will get loop alignement.",
 375           4, 0, 0)
 376
 377 /* For guessed profiles, the loops having unknown number of iterations
 378    are predicted to iterate relatively few (10) times at average.
 379    For functions containing one loop with large known number of iterations
 380    and other loops having unbounded loops we would end up predicting all
 381    the other loops cold that is not usually the case.  So we need to artificially
 382    flatten the profile.
 383
 384    We need to cut the maximal predicted iterations to large enough iterations
 385    so the loop appears important, but safely within HOT_BB_COUNT_FRACTION
 386    range.  */
 387
 388 DEFPARAM(PARAM_MAX_PREDICTED_ITERATIONS,
 389          "max-predicted-iterations",
 390          "The maximum number of loop iterations we predict statically",
 391          100, 0, 0)
 392 DEFPARAM(TRACER_DYNAMIC_COVERAGE_FEEDBACK,
 393          "tracer-dynamic-coverage-feedback",
 394          "The percentage of function, weighted by execution frequency, that must be covered by trace formation. Used when profile feedback is available",
 395          95, 0, 100)
 396 DEFPARAM(TRACER_DYNAMIC_COVERAGE,
 397          "tracer-dynamic-coverage",
 398          "The percentage of function, weighted by execution frequency, that must be covered by trace formation. Used when profile feedback is not available",
 399          75, 0, 100)
 400 DEFPARAM(TRACER_MAX_CODE_GROWTH,
 401          "tracer-max-code-growth",
 402          "Maximal code growth caused by tail duplication (in percent)",
 403          100, 0, 0)
 404 DEFPARAM(TRACER_MIN_BRANCH_RATIO,
 405          "tracer-min-branch-ratio",
 406          "Stop reverse growth if the reverse probability of best edge is less than this threshold (in percent)",
 407          10, 0, 100)
 408 DEFPARAM(TRACER_MIN_BRANCH_PROBABILITY_FEEDBACK,
 409          "tracer-min-branch-probability-feedback",
 410          "Stop forward growth if the probability of best edge is less than this threshold (in percent). Used when profile feedback is available",
 411          80, 0, 100)
 412 DEFPARAM(TRACER_MIN_BRANCH_PROBABILITY,
 413          "tracer-min-branch-probability",
 414          "Stop forward growth if the probability of best edge is less than this threshold (in percent). Used when profile feedback is not available",
 415          50, 0, 100)
 416
 417 /* The maximum number of incoming edges to consider for crossjumping.  */
 418 DEFPARAM(PARAM_MAX_CROSSJUMP_EDGES,
 419          "max-crossjump-edges",
 420          "The maximum number of incoming edges to consider for crossjumping",
 421          100, 0, 0)
 422
 423 /* The minimum number of matching instructions to consider for crossjumping.  */
 424 DEFPARAM(PARAM_MIN_CROSSJUMP_INSNS,
 425      "min-crossjump-insns",
 426      "The minimum number of matching instructions to consider for crossjumping",
 427      5, 0, 0)
 428
 429 /* The maximum number expansion factor when copying basic blocks.  */
 430 DEFPARAM(PARAM_MAX_GROW_COPY_BB_INSNS,
 431      "max-grow-copy-bb-insns",
 432      "The maximum expansion factor when copying basic blocks",
 433      8, 0, 0)
 434
 435 /* The maximum number of insns to duplicate when unfactoring computed gotos.  */
 436 DEFPARAM(PARAM_MAX_GOTO_DUPLICATION_INSNS,
 437      "max-goto-duplication-insns",
 438      "The maximum number of insns to duplicate when unfactoring computed gotos",
 439      8, 0, 0)
 440
 441 /* The maximum length of path considered in cse.  */
 442 DEFPARAM(PARAM_MAX_CSE_PATH_LENGTH,
 443          "max-cse-path-length",
 444          "The maximum length of path considered in cse",
 445          10, 0, 0)
 446 DEFPARAM(PARAM_MAX_CSE_INSNS,
 447          "max-cse-insns",
 448          "The maximum instructions CSE process before flushing",
 449          1000, 0, 0)
 450
 451 /* The cost of expression in loop invariant motion that is considered
 452    expensive.  */
 453 DEFPARAM(PARAM_LIM_EXPENSIVE,
 454          "lim-expensive",
 455          "The minimum cost of an expensive expression in the loop invariant motion",
 456          20, 0, 0)
 457
 458 /* Bound on number of candidates for induction variables below that
 459    all candidates are considered for each use in induction variable
 460    optimizations.  */
 461
 462 DEFPARAM(PARAM_IV_CONSIDER_ALL_CANDIDATES_BOUND,
 463          "iv-consider-all-candidates-bound",
 464          "Bound on number of candidates below that all candidates are considered in iv optimizations",
 465          30, 0, 0)
 466
 467 /* The induction variable optimizations give up on loops that contain more
 468    induction variable uses.  */
 469
 470 DEFPARAM(PARAM_IV_MAX_CONSIDERED_USES,
 471          "iv-max-considered-uses",
 472          "Bound on number of iv uses in loop optimized in iv optimizations",
 473          250, 0, 0)
 474
 475 /* If there are at most this number of ivs in the set, try removing unnecessary
 476    ivs from the set always.  */
 477
 478 DEFPARAM(PARAM_IV_ALWAYS_PRUNE_CAND_SET_BOUND,
 479          "iv-always-prune-cand-set-bound",
 480          "If number of candidates in the set is smaller, we always try to remove unused ivs during its optimization",
 481          10, 0, 0)
 482
 483 DEFPARAM(PARAM_SCEV_MAX_EXPR_SIZE,
 484          "scev-max-expr-size",
 485          "Bound on size of expressions used in the scalar evolutions analyzer",
 486          100, 0, 0)
 487
 488 DEFPARAM(PARAM_SCEV_MAX_EXPR_COMPLEXITY,
 489          "scev-max-expr-complexity",
 490          "Bound on the complexity of the expressions in the scalar evolutions analyzer",
 491          10, 0, 0)
 492
 493 DEFPARAM(PARAM_OMEGA_MAX_VARS,
 494          "omega-max-vars",
 495          "Bound on the number of variables in Omega constraint systems",
 496          128, 0, 0)
 497
 498 DEFPARAM(PARAM_OMEGA_MAX_GEQS,
 499          "omega-max-geqs",
 500          "Bound on the number of inequalities in Omega constraint systems",
 501          256, 0, 0)
 502
 503 DEFPARAM(PARAM_OMEGA_MAX_EQS,
 504          "omega-max-eqs",
 505          "Bound on the number of equalities in Omega constraint systems",
 506          128, 0, 0)
 507
 508 DEFPARAM(PARAM_OMEGA_MAX_WILD_CARDS,
 509          "omega-max-wild-cards",
 510          "Bound on the number of wild cards in Omega constraint systems",
 511          18, 0, 0)
 512
 513 DEFPARAM(PARAM_OMEGA_HASH_TABLE_SIZE,
 514          "omega-hash-table-size",
 515          "Bound on the size of the hash table in Omega constraint systems",
 516          550, 0, 0)
 517
 518 DEFPARAM(PARAM_OMEGA_MAX_KEYS,
 519          "omega-max-keys",
 520          "Bound on the number of keys in Omega constraint systems",
 521          500, 0, 0)
 522
 523 DEFPARAM(PARAM_OMEGA_ELIMINATE_REDUNDANT_CONSTRAINTS,
 524          "omega-eliminate-redundant-constraints",
 525          "When set to 1, use expensive methods to eliminate all redundant constraints",
 526          0, 0, 1)
 527
 528 DEFPARAM(PARAM_VECT_MAX_VERSION_FOR_ALIGNMENT_CHECKS,
 529          "vect-max-version-for-alignment-checks",
 530          "Bound on number of runtime checks inserted by the vectorizer's loop versioning for alignment check",
 531          6, 0, 0)
 532
 533 DEFPARAM(PARAM_VECT_MAX_VERSION_FOR_ALIAS_CHECKS,
 534          "vect-max-version-for-alias-checks",
 535          "Bound on number of runtime checks inserted by the vectorizer's loop versioning for alias check",
 536          10, 0, 0)
 537
 538 DEFPARAM(PARAM_MAX_CSELIB_MEMORY_LOCATIONS,
 539          "max-cselib-memory-locations",
 540          "The maximum memory locations recorded by cselib",
 541          500, 0, 0)
 542
 543 #ifdef ENABLE_GC_ALWAYS_COLLECT
 544 # define GGC_MIN_EXPAND_DEFAULT 0
 545 # define GGC_MIN_HEAPSIZE_DEFAULT 0
 546 #else
 547 # define GGC_MIN_EXPAND_DEFAULT 30
 548 # define GGC_MIN_HEAPSIZE_DEFAULT 4096
 549 #endif
 550
 551 DEFPARAM(GGC_MIN_EXPAND,
 552          "ggc-min-expand",
 553          "Minimum heap expansion to trigger garbage collection, as a percentage of the total size of the heap",
 554          GGC_MIN_EXPAND_DEFAULT, 0, 0)
 555
 556 DEFPARAM(GGC_MIN_HEAPSIZE,
 557          "ggc-min-heapsize",
 558          "Minimum heap size before we start collecting garbage, in kilobytes",
 559          GGC_MIN_HEAPSIZE_DEFAULT, 0, 0)
 560
 561 #undef GGC_MIN_EXPAND_DEFAULT
 562 #undef GGC_MIN_HEAPSIZE_DEFAULT
 563
 564 DEFPARAM(PARAM_MAX_RELOAD_SEARCH_INSNS,
 565          "max-reload-search-insns",
 566          "The maximum number of instructions to search backward when looking for equivalent reload",
 567          100, 0, 0)
 568
 569 DEFPARAM(PARAM_SINK_FREQUENCY_THRESHOLD,
 570          "sink-frequency-threshold",
 571          "Target block's relative execution frequency (as a percentage) required to sink a statement",
 572          75, 0, 100)
 573
 574 DEFPARAM(PARAM_MAX_SCHED_REGION_BLOCKS,
 575          "max-sched-region-blocks",
 576          "The maximum number of blocks in a region to be considered for interblock scheduling",
 577          10, 0, 0)
 578
 579 DEFPARAM(PARAM_MAX_SCHED_REGION_INSNS,
 580          "max-sched-region-insns",
 581          "The maximum number of insns in a region to be considered for interblock scheduling",
 582          100, 0, 0)
 583
 584 DEFPARAM(PARAM_MAX_PIPELINE_REGION_BLOCKS,
 585          "max-pipeline-region-blocks",
 586          "The maximum number of blocks in a region to be considered for interblock scheduling",
 587          15, 0, 0)
 588
 589 DEFPARAM(PARAM_MAX_PIPELINE_REGION_INSNS,
 590          "max-pipeline-region-insns",
 591          "The maximum number of insns in a region to be considered for interblock scheduling",
 592          200, 0, 0)
 593
 594 DEFPARAM(PARAM_MIN_SPEC_PROB,
 595          "min-spec-prob",
 596          "The minimum probability of reaching a source block for interblock speculative scheduling",
 597          40, 0, 0)
 598
 599 DEFPARAM(PARAM_MAX_SCHED_EXTEND_REGIONS_ITERS,
 600          "max-sched-extend-regions-iters",
 601          "The maximum number of iterations through CFG to extend regions",
 602          0, 0, 0)
 603
 604 DEFPARAM(PARAM_MAX_SCHED_INSN_CONFLICT_DELAY,
 605          "max-sched-insn-conflict-delay",
 606          "The maximum conflict delay for an insn to be considered for speculative motion",
 607          3, 1, 10)
 608
 609 DEFPARAM(PARAM_SCHED_SPEC_PROB_CUTOFF,
 610          "sched-spec-prob-cutoff",
 611          "The minimal probability of speculation success (in percents), so that speculative insn will be scheduled.",
 612          40, 0, 100)
 613
 614 DEFPARAM(PARAM_SCHED_STATE_EDGE_PROB_CUTOFF,
 615          "sched-state-edge-prob-cutoff",
 616          "The minimum probability an edge must have for the scheduler to save its state across it.",
 617          10, 0, 100)
 618
 619 DEFPARAM(PARAM_SELSCHED_MAX_LOOKAHEAD,
 620          "selsched-max-lookahead",
 621          "The maximum size of the lookahead window of selective scheduling",
 622          50, 0, 0)
 623
 624 DEFPARAM(PARAM_SELSCHED_MAX_SCHED_TIMES,
 625          "selsched-max-sched-times",
 626          "Maximum number of times that an insn could be scheduled",
 627          2, 0, 0)
 628
 629 DEFPARAM(PARAM_SELSCHED_INSNS_TO_RENAME,
 630          "selsched-insns-to-rename",
 631          "Maximum number of instructions in the ready list that are considered eligible for renaming",
 632          2, 0, 0)
 633
 634 DEFPARAM (PARAM_SCHED_MEM_TRUE_DEP_COST,
 635           "sched-mem-true-dep-cost",
 636           "Minimal distance between possibly conflicting store and load",
 637           1, 0, 0)
 638
 639 DEFPARAM(PARAM_MAX_LAST_VALUE_RTL,
 640          "max-last-value-rtl",
 641          "The maximum number of RTL nodes that can be recorded as combiner's last value",
 642          10000, 0, 0)
 643
 644 /* INTEGER_CST nodes are shared for values [{-1,0} .. N) for
 645    {signed,unsigned} integral types.  This determines N.
 646    Experimentation shows 251 to be a good value that generates the
 647    least amount of garbage for allocating the TREE_VEC storage.  */
 648 DEFPARAM (PARAM_INTEGER_SHARE_LIMIT,
 649           "integer-share-limit",
 650           "The upper bound for sharing integer constants",
 651           251, 2, 2)
 652
 653 DEFPARAM (PARAM_SSP_BUFFER_SIZE,
 654           "ssp-buffer-size",
 655           "The lower bound for a buffer to be considered for stack smashing protection",
 656           8, 1, 0)
 657
 658 /* When we thread through a block we have to make copies of the
 659    statements within the block.  Clearly for large blocks the code
 660    duplication is bad.
 661
 662    PARAM_MAX_JUMP_THREAD_DUPLICATION_STMTS specifies the maximum number
 663    of statements and PHI nodes allowed in a block which is going to
 664    be duplicated for thread jumping purposes.
 665
 666    Some simple analysis showed that more than 99% of the jump
 667    threading opportunities are for blocks with less than 15
 668    statements.  So we can get the benefits of jump threading
 669    without excessive code bloat for pathological cases with the
 670    throttle set at 15 statements.  */
 671 DEFPARAM (PARAM_MAX_JUMP_THREAD_DUPLICATION_STMTS,
 672           "max-jump-thread-duplication-stmts",
 673           "Maximum number of statements allowed in a block that needs to be duplicated when threading jumps",
 674           15, 0, 0)
 675
 676 /* This is the maximum number of fields a variable may have before the pointer analysis machinery
 677    will stop trying to treat it in a field-sensitive manner.
 678    There are programs out there with thousands of fields per structure, and handling them
 679    field-sensitively is not worth the cost.  */
 680 DEFPARAM (PARAM_MAX_FIELDS_FOR_FIELD_SENSITIVE,
 681           "max-fields-for-field-sensitive",
 682           "Maximum number of fields in a structure before pointer analysis treats the structure as a single variable",
 683           0, 0, 0)
 684
 685 DEFPARAM(PARAM_MAX_SCHED_READY_INSNS,
 686          "max-sched-ready-insns",
 687          "The maximum number of instructions ready to be issued to be considered by the scheduler during the first scheduling pass",
 688          100, 0, 0)
 689
 690 /* This is the maximum number of active local stores RTL DSE will consider.  */
 691 DEFPARAM (PARAM_MAX_DSE_ACTIVE_LOCAL_STORES,
 692           "max-dse-active-local-stores",
 693           "Maximum number of active local stores in RTL dead store elimination",
 694           5000, 0, 0)
 695
 696 /* Prefetching and cache-optimizations related parameters.  Default values are
 697    usually set by machine description.  */
 698
 699 /* The number of insns executed before prefetch is completed.  */
 700
 701 DEFPARAM (PARAM_PREFETCH_LATENCY,
 702          "prefetch-latency",
 703          "The number of insns executed before prefetch is completed",
 704          200, 0, 0)
 705
 706 /* The number of prefetches that can run at the same time.  */
 707
 708 DEFPARAM (PARAM_SIMULTANEOUS_PREFETCHES,
 709           "simultaneous-prefetches",
 710           "The number of prefetches that can run at the same time",
 711           3, 0, 0)
 712
 713 /* The size of L1 cache in kB.  */
 714
 715 DEFPARAM (PARAM_L1_CACHE_SIZE,
 716           "l1-cache-size",
 717           "The size of L1 cache",
 718           64, 0, 0)
 719
 720 /* The size of L1 cache line in bytes.  */
 721
 722 DEFPARAM (PARAM_L1_CACHE_LINE_SIZE,
 723           "l1-cache-line-size",
 724           "The size of L1 cache line",
 725           32, 0, 0)
 726
 727 /* The size of L2 cache in kB.  */
 728
 729 DEFPARAM (PARAM_L2_CACHE_SIZE,
 730           "l2-cache-size",
 731           "The size of L2 cache",
 732           512, 0, 0)
 733
 734 /* Whether we should use canonical types rather than deep "structural"
 735    type checking.  Setting this value to 1 (the default) improves
 736    compilation performance in the C++ and Objective-C++ front end;
 737    this value should only be set to zero to work around bugs in the
 738    canonical type system by disabling it.  */
 739
 740 DEFPARAM (PARAM_USE_CANONICAL_TYPES,
 741           "use-canonical-types",
 742           "Whether to use canonical types",
 743           1, 0, 1)
 744
 745 DEFPARAM (PARAM_MAX_PARTIAL_ANTIC_LENGTH,
 746           "max-partial-antic-length",
 747           "Maximum length of partial antic set when performing tree pre optimization",
 748           100, 0, 0)
 749
 750 /* The following is used as a stop-gap limit for cases where really huge
 751    SCCs blow up memory and compile-time use too much.  If we hit this limit,
 752    SCCVN and such FRE and PRE will be not done at all for the current
 753    function.  */
 754
 755 DEFPARAM (PARAM_SCCVN_MAX_SCC_SIZE,
 756           "sccvn-max-scc-size",
 757           "Maximum size of a SCC before SCCVN stops processing a function",
 758           10000, 10, 0)
 759
 760 /* The following is used as a stop-gap limit for cases where really huge
 761    functions blow up compile-time use too much.  It limits the number of
 762    alias-queries we do for finding common subexpressions for memory loads and
 763    stores.  The number of alias-queries is otherwise limited by the number of
 764    stores on paths to function entry.  */
 765
 766 DEFPARAM (PARAM_SCCVN_MAX_ALIAS_QUERIES_PER_ACCESS,
 767           "sccvn-max-alias-queries-per-access",
 768           "Maximum number of disambiguations to perform per memory access",
 769           1000, 0, 0)
 770
 771 DEFPARAM (PARAM_IRA_MAX_LOOPS_NUM,
 772           "ira-max-loops-num",
 773           "Max loops number for regional RA",
 774           100, 0, 0)
 775
 776 DEFPARAM (PARAM_IRA_MAX_CONFLICT_TABLE_SIZE,
 777           "ira-max-conflict-table-size",
 778           "Max size of conflict table in MB",
 779           1000, 0, 0)
 780
 781 DEFPARAM (PARAM_IRA_LOOP_RESERVED_REGS,
 782           "ira-loop-reserved-regs",
 783           "The number of registers in each class kept unused by loop invariant motion",
 784           2, 0, 0)
 785
 786 /* Switch initialization conversion will refuse to create arrays that are
 787    bigger than this parameter times the number of switch branches.  */
 788
 789 DEFPARAM (PARAM_SWITCH_CONVERSION_BRANCH_RATIO,
 790           "switch-conversion-max-branch-ratio",
 791           "The maximum ratio between array size and switch branches for "
 792           "a switch conversion to take place",
 793           8, 1, 0)
 794
 795 /* Size of tiles when doing loop blocking.  */
 796
 797 DEFPARAM (PARAM_LOOP_BLOCK_TILE_SIZE,
 798           "loop-block-tile-size",
 799           "size of tiles for loop blocking",
 800           51, 0, 0)
 801
 802 /* Maximal number of parameters that we allow in a SCoP.  */
 803
 804 DEFPARAM (PARAM_GRAPHITE_MAX_NB_SCOP_PARAMS,
 805           "graphite-max-nb-scop-params",
 806           "maximum number of parameters in a SCoP",
 807           10, 0, 0)
 808
 809 /* Maximal number of basic blocks in the functions analyzed by Graphite.  */
 810
 811 DEFPARAM (PARAM_GRAPHITE_MAX_BBS_PER_FUNCTION,
 812           "graphite-max-bbs-per-function",
 813           "maximum number of basic blocks per function to be analyzed by Graphite",
 814           100, 0, 0)
 815
 816 /* Avoid data dependence analysis on very large loops.  */
 817 DEFPARAM (PARAM_LOOP_MAX_DATAREFS_FOR_DATADEPS,
 818           "loop-max-datarefs-for-datadeps",
 819           "Maximum number of datarefs in loop for building loop data dependencies",
 820           1000, 0, 0)
 821
 822 /* Avoid doing loop invariant motion on very large loops.  */
 823
 824 DEFPARAM (PARAM_LOOP_INVARIANT_MAX_BBS_IN_LOOP,
 825           "loop-invariant-max-bbs-in-loop",
 826           "Max basic blocks number in loop for loop invariant motion",
 827           10000, 0, 0)
 828
 829 /* Avoid SLP vectorization of large basic blocks.  */
 830 DEFPARAM (PARAM_SLP_MAX_INSNS_IN_BB,
 831           "slp-max-insns-in-bb",
 832           "Maximum number of instructions in basic block to be considered for SLP vectorization",
 833           1000, 0, 0)
 834
 835 DEFPARAM (PARAM_MIN_INSN_TO_PREFETCH_RATIO,
 836           "min-insn-to-prefetch-ratio",
 837           "Min. ratio of insns to prefetches to enable prefetching for "
 838           "a loop with an unknown trip count",
 839           9, 0, 0)
 840
 841 DEFPARAM (PARAM_PREFETCH_MIN_INSN_TO_MEM_RATIO,
 842           "prefetch-min-insn-to-mem-ratio",
 843           "Min. ratio of insns to mem ops to enable prefetching in a loop",
 844           3, 0, 0)
 845
 846 /* Set maximum hash table size for var tracking.  */
 847
 848 DEFPARAM (PARAM_MAX_VARTRACK_SIZE,
 849           "max-vartrack-size",
 850           "Max. size of var tracking hash tables",
 851           50000000, 0, 0)
 852
 853 /* Set maximum recursion depth for var tracking expression expansion
 854    and resolution.  */
 855
 856 DEFPARAM (PARAM_MAX_VARTRACK_EXPR_DEPTH,
 857           "max-vartrack-expr-depth",
 858           "Max. recursion depth for expanding var tracking expressions",
 859           12, 0, 0)
 860
 861 /* Set minimum insn uid for non-debug insns.  */
 862
 863 DEFPARAM (PARAM_MIN_NONDEBUG_INSN_UID,
 864           "min-nondebug-insn-uid",
 865           "The minimum UID to be used for a nondebug insn",
 866           0, 1, 0)
 867
 868 DEFPARAM (PARAM_IPA_SRA_PTR_GROWTH_FACTOR,
 869           "ipa-sra-ptr-growth-factor",
 870           "Maximum allowed growth of size of new parameters ipa-sra replaces "
 871           "a pointer to an aggregate with",
 872           2, 0, 0)
 873
 874 DEFPARAM (PARAM_TM_MAX_AGGREGATE_SIZE,
 875           "tm-max-aggregate-size",
 876           "Size in bytes after which thread-local aggregates should be "
 877           "instrumented with the logging functions instead of save/restore "
 878           "pairs",
 879           9, 0, 0)
 880
 881 DEFPARAM (PARAM_IPA_CP_VALUE_LIST_SIZE,
 882           "ipa-cp-value-list-size",
 883           "Maximum size of a list of values associated with each parameter for "
 884           "interprocedural constant propagation",
 885           8, 0, 0)
 886
 887 DEFPARAM (PARAM_IPA_CP_EVAL_THRESHOLD,
 888           "ipa-cp-eval-threshold",
 889           "Threshold ipa-cp opportunity evaluation that is still considered "
 890           "beneficial to clone.",
 891           500, 0, 0)
 892
 893 DEFPARAM (PARAM_IPA_MAX_AGG_ITEMS,
 894           "ipa-max-agg-items",
 895           "Maximum number of aggregate content items for a parameter in "
 896           "jump functions and lattices",
 897           16, 0, 0)
 898
 899 /* WHOPR partitioning configuration.  */
 900
 901 DEFPARAM (PARAM_LTO_PARTITIONS,
 902           "lto-partitions",
 903           "Number of partitions the program should be split to",
 904           32, 1, 0)
 905
 906 DEFPARAM (MIN_PARTITION_SIZE,
 907           "lto-min-partition",
 908           "Minimal size of a partition for LTO (in estimated instructions)",
 909           1000, 0, 0)
 910
 911 /* Diagnostic parameters.  */
 912
 913 DEFPARAM (CXX_MAX_NAMESPACES_FOR_DIAGNOSTIC_HELP,
 914           "cxx-max-namespaces-for-diagnostic-help",
 915           "Maximum number of namespaces to search for alternatives when "
 916           "name lookup fails",
 917           1000, 0, 0)
 918
 919 /* Maximum number of conditional store pairs that can be sunk.  */
 920 DEFPARAM (PARAM_MAX_STORES_TO_SINK,
 921           "max-stores-to-sink",
 922           "Maximum number of conditional store pairs that can be sunk",
 923           2, 0, 0)
 924
 925 /* Override CASE_VALUES_THRESHOLD of when to switch from doing switch
 926    statements via if statements to using a table jump operation.  If the value
 927    is 0, the default CASE_VALUES_THRESHOLD will be used.  */
 928 DEFPARAM (PARAM_CASE_VALUES_THRESHOLD,
 929           "case-values-threshold",
 930           "The smallest number of different values for which it is best to "
 931           "use a jump-table instead of a tree of conditional branches, "
 932           "if 0, use the default for the machine",
 933           0, 0, 0)
 934
 935 /* Data race flags for C++0x memory model compliance.  */
 936 DEFPARAM (PARAM_ALLOW_LOAD_DATA_RACES,
 937           "allow-load-data-races",
 938           "Allow new data races on loads to be introduced",
 939           1, 0, 1)
 940
 941 DEFPARAM (PARAM_ALLOW_STORE_DATA_RACES,
 942           "allow-store-data-races",
 943           "Allow new data races on stores to be introduced",
 944           1, 0, 1)
 945
 946 DEFPARAM (PARAM_ALLOW_PACKED_LOAD_DATA_RACES,
 947           "allow-packed-load-data-races",
 948           "Allow new data races on packed data loads to be introduced",
 949           1, 0, 1)
 950
 951 DEFPARAM (PARAM_ALLOW_PACKED_STORE_DATA_RACES,
 952           "allow-packed-store-data-races",
 953           "Allow new data races on packed data stores to be introduced",
 954           1, 0, 1)
 955
 956 /* Reassociation width to be used by tree reassoc optimization.  */
 957 DEFPARAM (PARAM_TREE_REASSOC_WIDTH,
 958           "tree-reassoc-width",
 959           "Set the maximum number of instructions executed in parallel in "
 960           "reassociated tree. If 0, use the target dependent heuristic.",
 961           0, 0, 0)
 962
 963 DEFPARAM (PARAM_MAX_TAIL_MERGE_COMPARISONS,
 964           "max-tail-merge-comparisons",
 965           "Maximum amount of similar bbs to compare a bb with",
 966           10, 0, 0)
 967
 968 DEFPARAM (PARAM_MAX_TAIL_MERGE_ITERATIONS,
 969           "max-tail-merge-iterations",
 970           "Maximum amount of iterations of the pass over a function",
 971           2, 0, 0)
 972
 973 /* Maximum number of strings for which strlen optimization pass will
 974    track string lenths.  */
 975 DEFPARAM (PARAM_MAX_TRACKED_STRLENS,
 976           "max-tracked-strlens",
 977           "Maximum number of strings for which strlen optimization pass will "
 978           "track string lengths",
 979           1000, 0, 0)
 980
 981 /* Keep this in sync with the sched_pressure_algorithm enum.  */
 982 DEFPARAM (PARAM_SCHED_PRESSURE_ALGORITHM,
 983           "sched-pressure-algorithm",
 984           "Which -fsched-pressure algorithm to apply",
 985           1, 1, 2)
 986
 987 /* Maximum length of candidate scans in straight-line strength reduction.  */
 988 DEFPARAM (PARAM_MAX_SLSR_CANDIDATE_SCAN,
 989           "max-slsr-cand-scan",
 990           "Maximum length of candidate scans for straight-line "
 991           "strength reduction",
 992           50, 1, 999999)
 993
 994 /*
 995 Local variables:
 996 mode:c
 997 End:
 998 */