commit changelogs for previous change
[official-gcc.git] / gcc / tree-tailcall.c
blob6778c9a816104ddd3dfa86ad7a87589f9566b29b
1 /* Tail call optimization on trees.
2 Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
4 This file is part of GCC.
6 GCC is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 2, or (at your option)
9 any later version.
11 GCC is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 GNU General Public License for more details.
16 You should have received a copy of the GNU General Public License
17 along with GCC; see the file COPYING. If not, write to
18 the Free Software Foundation, 51 Franklin Street, Fifth Floor,
19 Boston, MA 02110-1301, USA. */
21 #include "config.h"
22 #include "system.h"
23 #include "coretypes.h"
24 #include "tm.h"
25 #include "tree.h"
26 #include "rtl.h"
27 #include "tm_p.h"
28 #include "hard-reg-set.h"
29 #include "basic-block.h"
30 #include "function.h"
31 #include "tree-flow.h"
32 #include "tree-dump.h"
33 #include "diagnostic.h"
34 #include "except.h"
35 #include "tree-pass.h"
36 #include "flags.h"
37 #include "langhooks.h"
39 /* The file implements the tail recursion elimination. It is also used to
40 analyze the tail calls in general, passing the results to the rtl level
41 where they are used for sibcall optimization.
43 In addition to the standard tail recursion elimination, we handle the most
44 trivial cases of making the call tail recursive by creating accumulators.
45 For example the following function
47 int sum (int n)
49 if (n > 0)
50 return n + sum (n - 1);
51 else
52 return 0;
55 is transformed into
57 int sum (int n)
59 int acc = 0;
61 while (n > 0)
62 acc += n--;
64 return acc;
67 To do this, we maintain two accumulators (a_acc and m_acc) that indicate
68 when we reach the return x statement, we should return a_acc + x * m_acc
69 instead. They are initially initialized to 0 and 1, respectively,
70 so the semantics of the function is obviously preserved. If we are
71 guaranteed that the value of the accumulator never change, we
72 omit the accumulator.
74 There are three cases how the function may exit. The first one is
75 handled in adjust_return_value, the other two in adjust_accumulator_values
76 (the second case is actually a special case of the third one and we
77 present it separately just for clarity):
79 1) Just return x, where x is not in any of the remaining special shapes.
80 We rewrite this to a gimple equivalent of return m_acc * x + a_acc.
82 2) return f (...), where f is the current function, is rewritten in a
83 classical tail-recursion elimination way, into assignment of arguments
84 and jump to the start of the function. Values of the accumulators
85 are unchanged.
87 3) return a + m * f(...), where a and m do not depend on call to f.
88 To preserve the semantics described before we want this to be rewritten
89 in such a way that we finally return
91 a_acc + (a + m * f(...)) * m_acc = (a_acc + a * m_acc) + (m * m_acc) * f(...).
93 I.e. we increase a_acc by a * m_acc, multiply m_acc by m and
94 eliminate the tail call to f. Special cases when the value is just
95 added or just multiplied are obtained by setting a = 0 or m = 1.
97 TODO -- it is possible to do similar tricks for other operations. */
99 /* A structure that describes the tailcall. */
101 struct tailcall
103 /* The block in that the call occur. */
104 basic_block call_block;
106 /* The iterator pointing to the call statement. */
107 block_stmt_iterator call_bsi;
109 /* True if it is a call to the current function. */
110 bool tail_recursion;
112 /* The return value of the caller is mult * f + add, where f is the return
113 value of the call. */
114 tree mult, add;
116 /* Next tailcall in the chain. */
117 struct tailcall *next;
120 /* The variables holding the value of multiplicative and additive
121 accumulator. */
122 static tree m_acc, a_acc;
124 static bool suitable_for_tail_opt_p (void);
125 static bool optimize_tail_call (struct tailcall *, bool);
126 static void eliminate_tail_call (struct tailcall *);
127 static void find_tail_calls (basic_block, struct tailcall **);
129 /* Returns false when the function is not suitable for tail call optimization
130 from some reason (e.g. if it takes variable number of arguments). */
132 static bool
133 suitable_for_tail_opt_p (void)
135 referenced_var_iterator rvi;
136 tree var;
138 if (current_function_stdarg)
139 return false;
141 /* No local variable nor structure field should be call-clobbered. We
142 ignore any kind of memory tag, as these are not real variables. */
144 FOR_EACH_REFERENCED_VAR (var, rvi)
147 if (!is_global_var (var)
148 && (!MTAG_P (var) || TREE_CODE (var) == STRUCT_FIELD_TAG)
149 && is_call_clobbered (var))
150 return false;
153 return true;
155 /* Returns false when the function is not suitable for tail call optimization
156 from some reason (e.g. if it takes variable number of arguments).
157 This test must pass in addition to suitable_for_tail_opt_p in order to make
158 tail call discovery happen. */
160 static bool
161 suitable_for_tail_call_opt_p (void)
163 tree param;
165 /* alloca (until we have stack slot life analysis) inhibits
166 sibling call optimizations, but not tail recursion. */
167 if (current_function_calls_alloca)
168 return false;
170 /* If we are using sjlj exceptions, we may need to add a call to
171 _Unwind_SjLj_Unregister at exit of the function. Which means
172 that we cannot do any sibcall transformations. */
173 if (USING_SJLJ_EXCEPTIONS && current_function_has_exception_handlers ())
174 return false;
176 /* Any function that calls setjmp might have longjmp called from
177 any called function. ??? We really should represent this
178 properly in the CFG so that this needn't be special cased. */
179 if (current_function_calls_setjmp)
180 return false;
182 /* ??? It is OK if the argument of a function is taken in some cases,
183 but not in all cases. See PR15387 and PR19616. Revisit for 4.1. */
184 for (param = DECL_ARGUMENTS (current_function_decl);
185 param;
186 param = TREE_CHAIN (param))
187 if (TREE_ADDRESSABLE (param))
188 return false;
190 return true;
193 /* Checks whether the expression EXPR in stmt AT is independent of the
194 statement pointed to by BSI (in a sense that we already know EXPR's value
195 at BSI). We use the fact that we are only called from the chain of
196 basic blocks that have only single successor. Returns the expression
197 containing the value of EXPR at BSI. */
199 static tree
200 independent_of_stmt_p (tree expr, tree at, block_stmt_iterator bsi)
202 basic_block bb, call_bb, at_bb;
203 edge e;
204 edge_iterator ei;
206 if (is_gimple_min_invariant (expr))
207 return expr;
209 if (TREE_CODE (expr) != SSA_NAME)
210 return NULL_TREE;
212 /* Mark the blocks in the chain leading to the end. */
213 at_bb = bb_for_stmt (at);
214 call_bb = bb_for_stmt (bsi_stmt (bsi));
215 for (bb = call_bb; bb != at_bb; bb = single_succ (bb))
216 bb->aux = &bb->aux;
217 bb->aux = &bb->aux;
219 while (1)
221 at = SSA_NAME_DEF_STMT (expr);
222 bb = bb_for_stmt (at);
224 /* The default definition or defined before the chain. */
225 if (!bb || !bb->aux)
226 break;
228 if (bb == call_bb)
230 for (; !bsi_end_p (bsi); bsi_next (&bsi))
231 if (bsi_stmt (bsi) == at)
232 break;
234 if (!bsi_end_p (bsi))
235 expr = NULL_TREE;
236 break;
239 if (TREE_CODE (at) != PHI_NODE)
241 expr = NULL_TREE;
242 break;
245 FOR_EACH_EDGE (e, ei, bb->preds)
246 if (e->src->aux)
247 break;
248 gcc_assert (e);
250 expr = PHI_ARG_DEF_FROM_EDGE (at, e);
251 if (TREE_CODE (expr) != SSA_NAME)
253 /* The value is a constant. */
254 break;
258 /* Unmark the blocks. */
259 for (bb = call_bb; bb != at_bb; bb = single_succ (bb))
260 bb->aux = NULL;
261 bb->aux = NULL;
263 return expr;
266 /* Simulates the effect of an assignment of ASS in STMT on the return value
267 of the tail recursive CALL passed in ASS_VAR. M and A are the
268 multiplicative and the additive factor for the real return value. */
270 static bool
271 process_assignment (tree ass, tree stmt, block_stmt_iterator call, tree *m,
272 tree *a, tree *ass_var)
274 tree op0, op1, non_ass_var;
275 tree dest = TREE_OPERAND (ass, 0);
276 tree src = TREE_OPERAND (ass, 1);
277 enum tree_code code = TREE_CODE (src);
278 tree src_var = src;
280 /* See if this is a simple copy operation of an SSA name to the function
281 result. In that case we may have a simple tail call. Ignore type
282 conversions that can never produce extra code between the function
283 call and the function return. */
284 STRIP_NOPS (src_var);
285 if (TREE_CODE (src_var) == SSA_NAME)
287 if (src_var != *ass_var)
288 return false;
290 *ass_var = dest;
291 return true;
294 if (TREE_CODE_CLASS (code) != tcc_binary)
295 return false;
297 /* Accumulator optimizations will reverse the order of operations.
298 We can only do that for floating-point types if we're assuming
299 that addition and multiplication are associative. */
300 if (!flag_unsafe_math_optimizations)
301 if (FLOAT_TYPE_P (TREE_TYPE (DECL_RESULT (current_function_decl))))
302 return false;
304 /* We only handle the code like
306 x = call ();
307 y = m * x;
308 z = y + a;
309 return z;
311 TODO -- Extend it for cases where the linear transformation of the output
312 is expressed in a more complicated way. */
314 op0 = TREE_OPERAND (src, 0);
315 op1 = TREE_OPERAND (src, 1);
317 if (op0 == *ass_var
318 && (non_ass_var = independent_of_stmt_p (op1, stmt, call)))
320 else if (op1 == *ass_var
321 && (non_ass_var = independent_of_stmt_p (op0, stmt, call)))
323 else
324 return false;
326 switch (code)
328 case PLUS_EXPR:
329 /* There should be no previous addition. TODO -- it should be fairly
330 straightforward to lift this restriction -- just allow storing
331 more complicated expressions in *A, and gimplify it in
332 adjust_accumulator_values. */
333 if (*a)
334 return false;
335 *a = non_ass_var;
336 *ass_var = dest;
337 return true;
339 case MULT_EXPR:
340 /* Similar remark applies here. Handling multiplication after addition
341 is just slightly more complicated -- we need to multiply both *A and
342 *M. */
343 if (*a || *m)
344 return false;
345 *m = non_ass_var;
346 *ass_var = dest;
347 return true;
349 /* TODO -- Handle other codes (NEGATE_EXPR, MINUS_EXPR). */
351 default:
352 return false;
356 /* Propagate VAR through phis on edge E. */
358 static tree
359 propagate_through_phis (tree var, edge e)
361 basic_block dest = e->dest;
362 tree phi;
364 for (phi = phi_nodes (dest); phi; phi = PHI_CHAIN (phi))
365 if (PHI_ARG_DEF_FROM_EDGE (phi, e) == var)
366 return PHI_RESULT (phi);
368 return var;
371 /* Finds tailcalls falling into basic block BB. The list of found tailcalls is
372 added to the start of RET. */
374 static void
375 find_tail_calls (basic_block bb, struct tailcall **ret)
377 tree ass_var, ret_var, stmt, func, param, args, call = NULL_TREE;
378 block_stmt_iterator bsi, absi;
379 bool tail_recursion;
380 struct tailcall *nw;
381 edge e;
382 tree m, a;
383 basic_block abb;
384 stmt_ann_t ann;
386 if (!single_succ_p (bb))
387 return;
389 for (bsi = bsi_last (bb); !bsi_end_p (bsi); bsi_prev (&bsi))
391 stmt = bsi_stmt (bsi);
393 /* Ignore labels. */
394 if (TREE_CODE (stmt) == LABEL_EXPR)
395 continue;
397 /* Check for a call. */
398 if (TREE_CODE (stmt) == MODIFY_EXPR)
400 ass_var = TREE_OPERAND (stmt, 0);
401 call = TREE_OPERAND (stmt, 1);
402 if (TREE_CODE (call) == WITH_SIZE_EXPR)
403 call = TREE_OPERAND (call, 0);
405 else
407 ass_var = NULL_TREE;
408 call = stmt;
411 if (TREE_CODE (call) == CALL_EXPR)
412 break;
414 /* If the statement has virtual or volatile operands, fail. */
415 ann = stmt_ann (stmt);
416 if (!ZERO_SSA_OPERANDS (stmt, (SSA_OP_VUSE | SSA_OP_VIRTUAL_DEFS))
417 || ann->has_volatile_ops)
418 return;
421 if (bsi_end_p (bsi))
423 edge_iterator ei;
424 /* Recurse to the predecessors. */
425 FOR_EACH_EDGE (e, ei, bb->preds)
426 find_tail_calls (e->src, ret);
428 return;
431 /* We found the call, check whether it is suitable. */
432 tail_recursion = false;
433 func = get_callee_fndecl (call);
434 if (func == current_function_decl)
436 for (param = DECL_ARGUMENTS (func), args = TREE_OPERAND (call, 1);
437 param && args;
438 param = TREE_CHAIN (param), args = TREE_CHAIN (args))
440 tree arg = TREE_VALUE (args);
441 if (param != arg)
443 /* Make sure there are no problems with copying. The parameter
444 have a copyable type and the two arguments must have reasonably
445 equivalent types. The latter requirement could be relaxed if
446 we emitted a suitable type conversion statement. */
447 if (!is_gimple_reg_type (TREE_TYPE (param))
448 || !lang_hooks.types_compatible_p (TREE_TYPE (param),
449 TREE_TYPE (arg)))
450 break;
452 /* The parameter should be a real operand, so that phi node
453 created for it at the start of the function has the meaning
454 of copying the value. This test implies is_gimple_reg_type
455 from the previous condition, however this one could be
456 relaxed by being more careful with copying the new value
457 of the parameter (emitting appropriate MODIFY_EXPR and
458 updating the virtual operands). */
459 if (!is_gimple_reg (param))
460 break;
463 if (!args && !param)
464 tail_recursion = true;
467 /* Now check the statements after the call. None of them has virtual
468 operands, so they may only depend on the call through its return
469 value. The return value should also be dependent on each of them,
470 since we are running after dce. */
471 m = NULL_TREE;
472 a = NULL_TREE;
474 abb = bb;
475 absi = bsi;
476 while (1)
478 bsi_next (&absi);
480 while (bsi_end_p (absi))
482 ass_var = propagate_through_phis (ass_var, single_succ_edge (abb));
483 abb = single_succ (abb);
484 absi = bsi_start (abb);
487 stmt = bsi_stmt (absi);
489 if (TREE_CODE (stmt) == LABEL_EXPR)
490 continue;
492 if (TREE_CODE (stmt) == RETURN_EXPR)
493 break;
495 if (TREE_CODE (stmt) != MODIFY_EXPR)
496 return;
498 if (!process_assignment (stmt, stmt, bsi, &m, &a, &ass_var))
499 return;
502 /* See if this is a tail call we can handle. */
503 ret_var = TREE_OPERAND (stmt, 0);
504 if (ret_var
505 && TREE_CODE (ret_var) == MODIFY_EXPR)
507 tree ret_op = TREE_OPERAND (ret_var, 1);
508 STRIP_NOPS (ret_op);
509 if (!tail_recursion
510 && TREE_CODE (ret_op) != SSA_NAME)
511 return;
513 if (!process_assignment (ret_var, stmt, bsi, &m, &a, &ass_var))
514 return;
515 ret_var = TREE_OPERAND (ret_var, 0);
518 /* We may proceed if there either is no return value, or the return value
519 is identical to the call's return. */
520 if (ret_var
521 && (ret_var != ass_var))
522 return;
524 /* If this is not a tail recursive call, we cannot handle addends or
525 multiplicands. */
526 if (!tail_recursion && (m || a))
527 return;
529 nw = XNEW (struct tailcall);
531 nw->call_block = bb;
532 nw->call_bsi = bsi;
534 nw->tail_recursion = tail_recursion;
536 nw->mult = m;
537 nw->add = a;
539 nw->next = *ret;
540 *ret = nw;
543 /* Adjust the accumulator values according to A and M after BSI, and update
544 the phi nodes on edge BACK. */
546 static void
547 adjust_accumulator_values (block_stmt_iterator bsi, tree m, tree a, edge back)
549 tree stmt, var, phi, tmp;
550 tree ret_type = TREE_TYPE (DECL_RESULT (current_function_decl));
551 tree a_acc_arg = a_acc, m_acc_arg = m_acc;
553 if (a)
555 if (m_acc)
557 if (integer_onep (a))
558 var = m_acc;
559 else
561 stmt = build2 (MODIFY_EXPR, ret_type, NULL_TREE,
562 build2 (MULT_EXPR, ret_type, m_acc, a));
564 tmp = create_tmp_var (ret_type, "acc_tmp");
565 add_referenced_tmp_var (tmp);
567 var = make_ssa_name (tmp, stmt);
568 TREE_OPERAND (stmt, 0) = var;
569 bsi_insert_after (&bsi, stmt, BSI_NEW_STMT);
572 else
573 var = a;
575 stmt = build2 (MODIFY_EXPR, ret_type, NULL_TREE,
576 build2 (PLUS_EXPR, ret_type, a_acc, var));
577 var = make_ssa_name (SSA_NAME_VAR (a_acc), stmt);
578 TREE_OPERAND (stmt, 0) = var;
579 bsi_insert_after (&bsi, stmt, BSI_NEW_STMT);
580 a_acc_arg = var;
583 if (m)
585 stmt = build2 (MODIFY_EXPR, ret_type, NULL_TREE,
586 build2 (MULT_EXPR, ret_type, m_acc, m));
587 var = make_ssa_name (SSA_NAME_VAR (m_acc), stmt);
588 TREE_OPERAND (stmt, 0) = var;
589 bsi_insert_after (&bsi, stmt, BSI_NEW_STMT);
590 m_acc_arg = var;
593 if (a_acc)
595 for (phi = phi_nodes (back->dest); phi; phi = PHI_CHAIN (phi))
596 if (PHI_RESULT (phi) == a_acc)
597 break;
599 add_phi_arg (phi, a_acc_arg, back);
602 if (m_acc)
604 for (phi = phi_nodes (back->dest); phi; phi = PHI_CHAIN (phi))
605 if (PHI_RESULT (phi) == m_acc)
606 break;
608 add_phi_arg (phi, m_acc_arg, back);
612 /* Adjust value of the return at the end of BB according to M and A
613 accumulators. */
615 static void
616 adjust_return_value (basic_block bb, tree m, tree a)
618 tree ret_stmt = last_stmt (bb), ret_var, var, stmt, tmp;
619 tree ret_type = TREE_TYPE (DECL_RESULT (current_function_decl));
620 block_stmt_iterator bsi = bsi_last (bb);
622 gcc_assert (TREE_CODE (ret_stmt) == RETURN_EXPR);
624 ret_var = TREE_OPERAND (ret_stmt, 0);
625 if (!ret_var)
626 return;
628 if (TREE_CODE (ret_var) == MODIFY_EXPR)
630 ret_var->common.ann = (tree_ann_t) stmt_ann (ret_stmt);
631 bsi_replace (&bsi, ret_var, true);
632 SSA_NAME_DEF_STMT (TREE_OPERAND (ret_var, 0)) = ret_var;
633 ret_var = TREE_OPERAND (ret_var, 0);
634 ret_stmt = build1 (RETURN_EXPR, TREE_TYPE (ret_stmt), ret_var);
635 bsi_insert_after (&bsi, ret_stmt, BSI_NEW_STMT);
638 if (m)
640 stmt = build2 (MODIFY_EXPR, ret_type, NULL_TREE,
641 build2 (MULT_EXPR, ret_type, m_acc, ret_var));
643 tmp = create_tmp_var (ret_type, "acc_tmp");
644 add_referenced_tmp_var (tmp);
646 var = make_ssa_name (tmp, stmt);
647 TREE_OPERAND (stmt, 0) = var;
648 bsi_insert_before (&bsi, stmt, BSI_SAME_STMT);
650 else
651 var = ret_var;
653 if (a)
655 stmt = build2 (MODIFY_EXPR, ret_type, NULL_TREE,
656 build2 (PLUS_EXPR, ret_type, a_acc, var));
658 tmp = create_tmp_var (ret_type, "acc_tmp");
659 add_referenced_tmp_var (tmp);
661 var = make_ssa_name (tmp, stmt);
662 TREE_OPERAND (stmt, 0) = var;
663 bsi_insert_before (&bsi, stmt, BSI_SAME_STMT);
666 TREE_OPERAND (ret_stmt, 0) = var;
667 update_stmt (ret_stmt);
670 /* Subtract COUNT and FREQUENCY from the basic block and it's
671 outgoing edge. */
672 static void
673 decrease_profile (basic_block bb, gcov_type count, int frequency)
675 edge e;
676 bb->count -= count;
677 if (bb->count < 0)
678 bb->count = 0;
679 bb->frequency -= frequency;
680 if (bb->frequency < 0)
681 bb->frequency = 0;
682 if (!single_succ_p (bb))
684 gcc_assert (!EDGE_COUNT (bb->succs));
685 return;
687 e = single_succ_edge (bb);
688 e->count -= count;
689 if (e->count < 0)
690 e->count = 0;
693 /* Eliminates tail call described by T. TMP_VARS is a list of
694 temporary variables used to copy the function arguments. */
696 static void
697 eliminate_tail_call (struct tailcall *t)
699 tree param, stmt, args, rslt, call;
700 basic_block bb, first;
701 edge e;
702 tree phi;
703 block_stmt_iterator bsi;
704 use_operand_p mayuse;
705 def_operand_p maydef;
706 ssa_op_iter iter;
707 tree orig_stmt;
709 stmt = orig_stmt = bsi_stmt (t->call_bsi);
710 bb = t->call_block;
712 if (dump_file && (dump_flags & TDF_DETAILS))
714 fprintf (dump_file, "Eliminated tail recursion in bb %d : ",
715 bb->index);
716 print_generic_stmt (dump_file, stmt, TDF_SLIM);
717 fprintf (dump_file, "\n");
720 if (TREE_CODE (stmt) == MODIFY_EXPR)
721 stmt = TREE_OPERAND (stmt, 1);
723 first = single_succ (ENTRY_BLOCK_PTR);
725 /* Remove the code after call_bsi that will become unreachable. The
726 possibly unreachable code in other blocks is removed later in
727 cfg cleanup. */
728 bsi = t->call_bsi;
729 bsi_next (&bsi);
730 while (!bsi_end_p (bsi))
732 tree t = bsi_stmt (bsi);
733 /* Do not remove the return statement, so that redirect_edge_and_branch
734 sees how the block ends. */
735 if (TREE_CODE (t) == RETURN_EXPR)
736 break;
738 bsi_remove (&bsi);
739 release_defs (t);
742 /* Number of executions of function has reduced by the tailcall. */
743 e = single_succ_edge (t->call_block);
744 decrease_profile (EXIT_BLOCK_PTR, e->count, EDGE_FREQUENCY (e));
745 decrease_profile (ENTRY_BLOCK_PTR, e->count, EDGE_FREQUENCY (e));
746 if (e->dest != EXIT_BLOCK_PTR)
747 decrease_profile (e->dest, e->count, EDGE_FREQUENCY (e));
749 /* Replace the call by a jump to the start of function. */
750 e = redirect_edge_and_branch (single_succ_edge (t->call_block), first);
751 gcc_assert (e);
752 PENDING_STMT (e) = NULL_TREE;
754 /* Add phi node entries for arguments. Not every PHI node corresponds to
755 a function argument (there may be PHI nodes for virtual definitions of the
756 eliminated calls), so we search for a PHI corresponding to each argument
757 rather than searching for which argument a PHI node corresponds to. */
759 for (param = DECL_ARGUMENTS (current_function_decl),
760 args = TREE_OPERAND (stmt, 1);
761 param;
762 param = TREE_CHAIN (param),
763 args = TREE_CHAIN (args))
766 for (phi = phi_nodes (first); phi; phi = PHI_CHAIN (phi))
767 if (param == SSA_NAME_VAR (PHI_RESULT (phi)))
768 break;
770 /* The phi node indeed does not have to be there, in case the operand is
771 invariant in the function. */
772 if (!phi)
773 continue;
775 add_phi_arg (phi, TREE_VALUE (args), e);
778 /* Add phi nodes for the call clobbered variables. */
779 FOR_EACH_SSA_MAYDEF_OPERAND (maydef, mayuse, orig_stmt, iter)
781 param = SSA_NAME_VAR (DEF_FROM_PTR (maydef));
782 for (phi = phi_nodes (first); phi; phi = PHI_CHAIN (phi))
783 if (param == SSA_NAME_VAR (PHI_RESULT (phi)))
784 break;
786 if (!phi)
788 tree name = default_def (param);
789 tree new_name;
791 if (!name)
793 /* It may happen that the tag does not have a default_def in case
794 when all uses of it are dominated by a MUST_DEF. This however
795 means that it is not necessary to add a phi node for this
796 tag. */
797 continue;
799 new_name = make_ssa_name (param, SSA_NAME_DEF_STMT (name));
801 set_default_def (param, new_name);
802 phi = create_phi_node (name, first);
803 SSA_NAME_DEF_STMT (name) = phi;
804 add_phi_arg (phi, new_name, single_succ_edge (ENTRY_BLOCK_PTR));
806 /* For all calls the same set of variables should be clobbered. This
807 means that there always should be the appropriate phi node except
808 for the first time we eliminate the call. */
809 gcc_assert (EDGE_COUNT (first->preds) <= 2);
812 add_phi_arg (phi, USE_FROM_PTR (mayuse), e);
815 /* Update the values of accumulators. */
816 adjust_accumulator_values (t->call_bsi, t->mult, t->add, e);
818 call = bsi_stmt (t->call_bsi);
819 if (TREE_CODE (call) == MODIFY_EXPR)
821 rslt = TREE_OPERAND (call, 0);
823 /* Result of the call will no longer be defined. So adjust the
824 SSA_NAME_DEF_STMT accordingly. */
825 SSA_NAME_DEF_STMT (rslt) = build_empty_stmt ();
828 bsi_remove (&t->call_bsi);
829 release_defs (call);
832 /* Optimizes the tailcall described by T. If OPT_TAILCALLS is true, also
833 mark the tailcalls for the sibcall optimization. */
835 static bool
836 optimize_tail_call (struct tailcall *t, bool opt_tailcalls)
838 if (t->tail_recursion)
840 eliminate_tail_call (t);
841 return true;
844 if (opt_tailcalls)
846 tree stmt = bsi_stmt (t->call_bsi);
848 stmt = get_call_expr_in (stmt);
849 CALL_EXPR_TAILCALL (stmt) = 1;
850 if (dump_file && (dump_flags & TDF_DETAILS))
852 fprintf (dump_file, "Found tail call ");
853 print_generic_expr (dump_file, stmt, dump_flags);
854 fprintf (dump_file, " in bb %i\n", t->call_block->index);
858 return false;
861 /* Optimizes tail calls in the function, turning the tail recursion
862 into iteration. */
864 static void
865 tree_optimize_tail_calls_1 (bool opt_tailcalls)
867 edge e;
868 bool phis_constructed = false;
869 struct tailcall *tailcalls = NULL, *act, *next;
870 bool changed = false;
871 basic_block first = single_succ (ENTRY_BLOCK_PTR);
872 tree stmt, param, ret_type, tmp, phi;
873 edge_iterator ei;
875 if (!suitable_for_tail_opt_p ())
876 return;
877 if (opt_tailcalls)
878 opt_tailcalls = suitable_for_tail_call_opt_p ();
880 FOR_EACH_EDGE (e, ei, EXIT_BLOCK_PTR->preds)
882 /* Only traverse the normal exits, i.e. those that end with return
883 statement. */
884 stmt = last_stmt (e->src);
886 if (stmt
887 && TREE_CODE (stmt) == RETURN_EXPR)
888 find_tail_calls (e->src, &tailcalls);
891 /* Construct the phi nodes and accumulators if necessary. */
892 a_acc = m_acc = NULL_TREE;
893 for (act = tailcalls; act; act = act->next)
895 if (!act->tail_recursion)
896 continue;
898 if (!phis_constructed)
900 tree name;
901 /* Ensure that there is only one predecessor of the block. */
902 if (!single_pred_p (first))
903 first = split_edge (single_succ_edge (ENTRY_BLOCK_PTR));
905 /* Copy the args if needed. */
906 for (param = DECL_ARGUMENTS (current_function_decl);
907 param;
908 param = TREE_CHAIN (param))
909 if (is_gimple_reg (param)
910 && var_ann (param)
911 /* Also parameters that are only defined but never used need not
912 be copied. */
913 && ((name = default_def (param))
914 && TREE_CODE (name) == SSA_NAME))
916 tree new_name = make_ssa_name (param, SSA_NAME_DEF_STMT (name));
917 tree phi;
919 set_default_def (param, new_name);
920 phi = create_phi_node (name, first);
921 SSA_NAME_DEF_STMT (name) = phi;
922 add_phi_arg (phi, new_name, single_pred_edge (first));
924 phis_constructed = true;
927 if (act->add && !a_acc)
929 ret_type = TREE_TYPE (DECL_RESULT (current_function_decl));
931 tmp = create_tmp_var (ret_type, "add_acc");
932 add_referenced_tmp_var (tmp);
934 phi = create_phi_node (tmp, first);
935 add_phi_arg (phi,
936 /* RET_TYPE can be a float when -ffast-maths is
937 enabled. */
938 fold_convert (ret_type, integer_zero_node),
939 single_pred_edge (first));
940 a_acc = PHI_RESULT (phi);
943 if (act->mult && !m_acc)
945 ret_type = TREE_TYPE (DECL_RESULT (current_function_decl));
947 tmp = create_tmp_var (ret_type, "mult_acc");
948 add_referenced_tmp_var (tmp);
950 phi = create_phi_node (tmp, first);
951 add_phi_arg (phi,
952 /* RET_TYPE can be a float when -ffast-maths is
953 enabled. */
954 fold_convert (ret_type, integer_one_node),
955 single_pred_edge (first));
956 m_acc = PHI_RESULT (phi);
960 for (; tailcalls; tailcalls = next)
962 next = tailcalls->next;
963 changed |= optimize_tail_call (tailcalls, opt_tailcalls);
964 free (tailcalls);
967 if (a_acc || m_acc)
969 /* Modify the remaining return statements. */
970 FOR_EACH_EDGE (e, ei, EXIT_BLOCK_PTR->preds)
972 stmt = last_stmt (e->src);
974 if (stmt
975 && TREE_CODE (stmt) == RETURN_EXPR)
976 adjust_return_value (e->src, m_acc, a_acc);
980 if (changed)
982 free_dominance_info (CDI_DOMINATORS);
983 cleanup_tree_cfg ();
987 static void
988 execute_tail_recursion (void)
990 tree_optimize_tail_calls_1 (false);
993 static bool
994 gate_tail_calls (void)
996 return flag_optimize_sibling_calls != 0;
999 static void
1000 execute_tail_calls (void)
1002 tree_optimize_tail_calls_1 (true);
1005 struct tree_opt_pass pass_tail_recursion =
1007 "tailr", /* name */
1008 NULL, /* gate */
1009 execute_tail_recursion, /* execute */
1010 NULL, /* sub */
1011 NULL, /* next */
1012 0, /* static_pass_number */
1013 0, /* tv_id */
1014 PROP_cfg | PROP_ssa | PROP_alias, /* properties_required */
1015 0, /* properties_provided */
1016 0, /* properties_destroyed */
1017 0, /* todo_flags_start */
1018 TODO_dump_func | TODO_verify_ssa, /* todo_flags_finish */
1019 0 /* letter */
1022 struct tree_opt_pass pass_tail_calls =
1024 "tailc", /* name */
1025 gate_tail_calls, /* gate */
1026 execute_tail_calls, /* execute */
1027 NULL, /* sub */
1028 NULL, /* next */
1029 0, /* static_pass_number */
1030 0, /* tv_id */
1031 PROP_cfg | PROP_ssa | PROP_alias, /* properties_required */
1032 0, /* properties_provided */
1033 0, /* properties_destroyed */
1034 0, /* todo_flags_start */
1035 TODO_dump_func | TODO_verify_ssa, /* todo_flags_finish */
1036 0 /* letter */