Implement -mmemcpy-strategy= and -mmemset-strategy= options
[official-gcc.git] / gcc / ada / uname.ads
blobc1b59b6cb9299df37929f8c8a313efe26a2c7012
1 ------------------------------------------------------------------------------
2 -- --
3 -- GNAT COMPILER COMPONENTS --
4 -- --
5 -- U N A M E --
6 -- --
7 -- S p e c --
8 -- --
9 -- Copyright (C) 1992-2009 Free Software Foundation, Inc. --
10 -- --
11 -- GNAT is free software; you can redistribute it and/or modify it under --
12 -- terms of the GNU General Public License as published by the Free Soft- --
13 -- ware Foundation; either version 3, or (at your option) any later ver- --
14 -- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
15 -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
16 -- or FITNESS FOR A PARTICULAR PURPOSE. --
17 -- --
18 -- As a special exception under Section 7 of GPL version 3, you are granted --
19 -- additional permissions described in the GCC Runtime Library Exception, --
20 -- version 3.1, as published by the Free Software Foundation. --
21 -- --
22 -- You should have received a copy of the GNU General Public License and --
23 -- a copy of the GCC Runtime Library Exception along with this program; --
24 -- see the files COPYING3 and COPYING.RUNTIME respectively. If not, see --
25 -- <http://www.gnu.org/licenses/>. --
26 -- --
27 -- GNAT was originally developed by the GNAT team at New York University. --
28 -- Extensive contributions were provided by Ada Core Technologies Inc. --
29 -- --
30 ------------------------------------------------------------------------------
32 with Namet; use Namet;
33 with Types; use Types;
35 package Uname is
37 ---------------------------
38 -- Unit Name Conventions --
39 ---------------------------
41 -- Units are associated with a unique ASCII name as follows. First we have
42 -- the fully expanded name of the unit, with lower case letters (except
43 -- for the use of upper case letters for encoding upper half and wide
44 -- characters, as described in Namet), and periods. Following this is one
45 -- of the following suffixes:
47 -- %s for package/subprogram/generic declarations (specs)
48 -- %b for package/subprogram/generic bodies and subunits
50 -- Unit names are stored in the names table, and referred to by the
51 -- corresponding Name_Id values. The type Unit_Name_Type, derived from
52 -- Name_Id, is used to indicate that a Name_Id value that holds a unit name
53 -- (as defined above) is expected.
55 -- Note: as far as possible the conventions for unit names are encapsulated
56 -- in this package. The one exception is that package Fname, which provides
57 -- conversion routines from unit names to file names must be aware of the
58 -- precise conventions that are used.
60 -------------------
61 -- Display Names --
62 -------------------
64 -- For display purposes, unit names are printed out with the suffix
65 -- " (body)" for a body and " (spec)" for a spec. These formats are
66 -- used for the Write_Unit_Name and Get_Unit_Name_String subprograms.
68 -----------------
69 -- Subprograms --
70 -----------------
72 function Get_Body_Name (N : Unit_Name_Type) return Unit_Name_Type;
73 -- Given the name of a spec, this function returns the name of the
74 -- corresponding body, i.e. characters %s replaced by %b
76 function Get_Parent_Body_Name (N : Unit_Name_Type) return Unit_Name_Type;
77 -- Given the name of a subunit, returns the name of the parent body
79 function Get_Parent_Spec_Name (N : Unit_Name_Type) return Unit_Name_Type;
80 -- Given the name of a child unit spec or body, returns the unit name
81 -- of the parent spec. Returns No_Name if the given name is not the name
82 -- of a child unit.
84 procedure Get_External_Unit_Name_String (N : Unit_Name_Type);
85 -- Given the name of a body or spec unit, this procedure places in
86 -- Name_Buffer the name of the unit with periods replaced by double
87 -- underscores. The spec/body indication is eliminated. The length
88 -- of the stored name is placed in Name_Len. All letters are lower
89 -- case, corresponding to the string used in external names.
91 function Get_Spec_Name (N : Unit_Name_Type) return Unit_Name_Type;
92 -- Given the name of a body, this function returns the name of the
93 -- corresponding spec, i.e. characters %b replaced by %s
95 function Get_Unit_Name (N : Node_Id) return Unit_Name_Type;
96 -- This procedure returns the unit name that corresponds to the given node,
97 -- which is one of the following:
99 -- N_Subprogram_Declaration (spec) cases
100 -- N_Package_Declaration
101 -- N_Generic_Declaration
102 -- N_With_Clause
103 -- N_Function_Instantiation
104 -- N_Package_Instantiation
105 -- N_Procedure_Instantiation
106 -- N_Pragma (Elaborate case)
108 -- N_Package_Body (body) cases
109 -- N_Subprogram_Body
110 -- N_Identifier
111 -- N_Selected_Component
113 -- N_Subprogram_Body_Stub (subunit) cases
114 -- N_Package_Body_Stub
115 -- N_Task_Body_Stub
116 -- N_Protected_Body_Stub
117 -- N_Subunit
119 procedure Get_Unit_Name_String
120 (N : Unit_Name_Type;
121 Suffix : Boolean := True);
122 -- Places the display name of the unit in Name_Buffer and sets Name_Len to
123 -- the length of the stored name, i.e. it uses the same interface as the
124 -- Get_Name_String routine in the Namet package. The name is decoded and
125 -- contains an indication of spec or body if Boolean parameter Suffix is
126 -- True.
128 function Is_Body_Name (N : Unit_Name_Type) return Boolean;
129 -- Returns True iff the given name is the unit name of a body (i.e. if
130 -- it ends with the characters %b).
132 function Is_Child_Name (N : Unit_Name_Type) return Boolean;
133 -- Returns True iff the given name is a child unit name (of either a
134 -- body or a spec).
136 function Is_Spec_Name (N : Unit_Name_Type) return Boolean;
137 -- Returns True iff the given name is the unit name of a specification
138 -- (i.e. if it ends with the characters %s).
140 function Name_To_Unit_Name (N : Name_Id) return Unit_Name_Type;
141 -- Given the Id of the Ada name of a unit, this function returns the
142 -- corresponding unit name of the spec (by appending %s to the name).
144 function New_Child
145 (Old : Unit_Name_Type;
146 Newp : Unit_Name_Type) return Unit_Name_Type;
147 -- Old is a child unit name (for either a body or spec). Newp is the unit
148 -- name of the actual parent (this may be different from the parent in
149 -- old). The returned unit name is formed by taking the parent name from
150 -- Newp and the child unit name from Old, with the result being a body or
151 -- spec depending on Old. For example:
153 -- Old = A.B.C (body)
154 -- Newp = A.R (spec)
155 -- result = A.R.C (body)
157 -- See spec of Load_Unit for extensive discussion of why this routine
158 -- needs to be used (the call in the body of Load_Unit is the only one).
160 function Uname_Ge (Left, Right : Unit_Name_Type) return Boolean;
161 function Uname_Gt (Left, Right : Unit_Name_Type) return Boolean;
162 function Uname_Le (Left, Right : Unit_Name_Type) return Boolean;
163 function Uname_Lt (Left, Right : Unit_Name_Type) return Boolean;
164 -- These functions perform lexicographic ordering of unit names. The
165 -- ordering is suitable for printing, and is not quite a straightforward
166 -- comparison of the names, since the convention is that specs appear
167 -- before bodies. Note that the standard = and /= operators work fine
168 -- because all unit names are hashed into the name table, so if two names
169 -- are the same, they always have the same Name_Id value.
171 procedure Write_Unit_Name (N : Unit_Name_Type);
172 -- Given a unit name, this procedure writes the display name to the
173 -- standard output file. Name_Buffer and Name_Len are set as described
174 -- above for the Get_Unit_Name_String call on return.
176 end Uname;