1 ------------------------------------------------------------------------------
3 -- GNAT COMPILER COMPONENTS --
5 -- S Y S T E M . R I D E N T --
9 -- Copyright (C) 1992-2006, Free Software Foundation, Inc. --
11 -- GNAT is free software; you can redistribute it and/or modify it under --
12 -- terms of the GNU General Public License as published by the Free Soft- --
13 -- ware Foundation; either version 2, or (at your option) any later ver- --
14 -- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
15 -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
16 -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License --
17 -- for more details. You should have received a copy of the GNU General --
18 -- Public License distributed with GNAT; see file COPYING. If not, write --
19 -- to the Free Software Foundation, 51 Franklin Street, Fifth Floor, --
20 -- Boston, MA 02110-1301, USA. --
22 -- As a special exception, if other files instantiate generics from this --
23 -- unit, or you link this unit with other files to produce an executable, --
24 -- this unit does not by itself cause the resulting executable to be --
25 -- covered by the GNU General Public License. This exception does not --
26 -- however invalidate any other reasons why the executable file might be --
27 -- covered by the GNU Public License. --
29 -- GNAT was originally developed by the GNAT team at New York University. --
30 -- Extensive contributions were provided by Ada Core Technologies Inc. --
32 ------------------------------------------------------------------------------
34 -- This package defines the set of restriction identifiers. It is a generic
35 -- package that is instantiated by the compiler/binder in package Rident, and
36 -- is instantiated in package System.Restrictions for use at run-time.
38 -- The reason that we make this a generic package is so that in the case of
39 -- the instantiation in Rident for use at compile time and bind time, we can
40 -- generate normal image tables for the enumeration types, which are needed
41 -- for diagnostic and informational messages. At run-time we really do not
42 -- want to waste the space for these image tables, and they are not needed,
43 -- so we can do the instantiation under control of Discard_Names to remove
47 package System
.Rident
is
50 -- The following enumeration type defines the set of restriction
51 -- identifiers that are implemented in GNAT.
53 -- To add a new restriction identifier, add an entry with the name
54 -- to be used in the pragma, and add appropriate calls to the
55 -- Restrict.Check_Restriction routine.
57 type Restriction_Id
is
59 -- The following cases are checked for consistency in the binder
61 (Simple_Barriers
, -- GNAT (Ravenscar)
62 No_Abort_Statements
, -- (RM D.7(5), H.4(3))
63 No_Access_Subprograms
, -- (RM H.4(17))
64 No_Allocators
, -- (RM H.4(7))
65 No_Asynchronous_Control
, -- (RM D.7(10))
67 No_Delay
, -- (RM H.4(21))
68 No_Direct_Boolean_Operators
, -- GNAT
69 No_Dispatch
, -- (RM H.4(19))
70 No_Dispatching_Calls
, -- GNAT
71 No_Dynamic_Attachment
, -- GNAT
72 No_Dynamic_Priorities
, -- (RM D.9(9))
73 No_Enumeration_Maps
, -- GNAT
74 No_Entry_Calls_In_Elaboration_Code
, -- GNAT
75 No_Entry_Queue
, -- GNAT (Ravenscar)
76 No_Exception_Handlers
, -- GNAT
77 No_Exception_Registration
, -- GNAT
78 No_Exceptions
, -- (RM H.4(12))
79 No_Finalization
, -- GNAT
80 No_Fixed_Point
, -- (RM H.4(15))
81 No_Floating_Point
, -- (RM H.4(14))
82 No_IO
, -- (RM H.4(20))
83 No_Implicit_Conditionals
, -- GNAT
84 No_Implicit_Dynamic_Code
, -- GNAT
85 No_Implicit_Heap_Allocations
, -- (RM D.8(8), H.4(3))
86 No_Implicit_Loops
, -- GNAT
87 No_Initialize_Scalars
, -- GNAT
88 No_Local_Allocators
, -- (RM H.4(8))
89 No_Local_Protected_Objects
, -- GNAT
90 No_Nested_Finalization
, -- (RM D.7(4))
91 No_Protected_Type_Allocators
, -- GNAT
92 No_Protected_Types
, -- (RM H.4(5))
93 No_Recursion
, -- (RM H.4(22))
94 No_Reentrancy
, -- (RM H.4(23))
95 No_Relative_Delay
, -- GNAT (Ravenscar)
96 No_Requeue_Statements
, -- GNAT
97 No_Secondary_Stack
, -- GNAT
98 No_Select_Statements
, -- GNAT (Ravenscar)
99 No_Standard_Storage_Pools
, -- GNAT
101 No_Task_Allocators
, -- (RM D.7(7))
102 No_Task_Attributes_Package
, -- GNAT
103 No_Task_Hierarchy
, -- (RM D.7(3), H.4(3))
104 No_Task_Termination
, -- GNAT (Ravenscar)
106 No_Terminate_Alternatives
, -- (RM D.7(6))
107 No_Unchecked_Access
, -- (RM H.4(18))
108 No_Unchecked_Conversion
, -- (RM H.4(16))
109 No_Unchecked_Deallocation
, -- (RM H.4(9))
110 Static_Priorities
, -- GNAT
111 Static_Storage_Size
, -- GNAT
113 -- The following cases do not require partition-wide checks
115 Immediate_Reclamation
, -- (RM H.4(10))
116 No_Implementation_Attributes
, -- Ada 2005 AI-257
117 No_Implementation_Pragmas
, -- Ada 2005 AI-257
118 No_Implementation_Restrictions
, -- GNAT
119 No_Elaboration_Code
, -- GNAT
120 No_Obsolescent_Features
, -- Ada 2005 AI-368
121 No_Wide_Characters
, -- GNAT
123 -- The following cases require a parameter value
125 -- The following entries are fully checked at compile/bind time,
126 -- which means that the compiler can in general tell the minimum
127 -- value which could be used with a restrictions pragma. The binder
128 -- can deduce the appropriate minimum value for the partition by
129 -- taking the maximum value required by any unit.
131 Max_Protected_Entries
, -- (RM D.7(14))
132 Max_Select_Alternatives
, -- (RM D.7(12))
133 Max_Task_Entries
, -- (RM D.7(13), H.4(3))
135 -- The following entries are also fully checked at compile/bind
136 -- time, and the compiler can also at least in some cases tell
137 -- the minimum value which could be used with a restriction pragma.
138 -- The difference is that the contributions are additive, so the
139 -- binder deduces this value by adding the unit contributions.
141 Max_Tasks
, -- (RM D.7(19), H.4(3))
143 -- The following entries are checked at compile time only for
144 -- zero/nonzero entries. This means that the compiler can tell
145 -- at compile time if a restriction value of zero is (would be)
146 -- violated, but that is all. The compiler cannot distinguish
147 -- between different non-zero values.
149 Max_Asynchronous_Select_Nesting
, -- (RM D.7(18), H.4(3))
150 Max_Entry_Queue_Length
, -- GNAT
152 -- The remaining entries are not checked at compile/bind time
154 Max_Storage_At_Blocking
, -- (RM D.7(17))
156 Not_A_Restriction_Id
);
158 -- Synonyms permitted for historical purposes of compatibility.
159 -- Must be coordinated with Restrict.Process_Restriction_Synonym.
161 Boolean_Entry_Barriers
: Restriction_Id
renames Simple_Barriers
;
162 Max_Entry_Queue_Depth
: Restriction_Id
renames Max_Entry_Queue_Length
;
163 No_Dynamic_Interrupts
: Restriction_Id
renames No_Dynamic_Attachment
;
164 No_Requeue
: Restriction_Id
renames No_Requeue_Statements
;
165 No_Task_Attributes
: Restriction_Id
renames No_Task_Attributes_Package
;
167 subtype All_Restrictions
is Restriction_Id
range
168 Simple_Barriers
.. Max_Storage_At_Blocking
;
169 -- All restrictions (excluding only Not_A_Restriction_Id)
171 subtype All_Boolean_Restrictions
is Restriction_Id
range
172 Simple_Barriers
.. No_Wide_Characters
;
173 -- All restrictions which do not take a parameter
175 subtype Partition_Boolean_Restrictions
is All_Boolean_Restrictions
range
176 Simple_Barriers
.. Static_Storage_Size
;
177 -- Boolean restrictions that are checked for partition consistency.
178 -- Note that all parameter restrictions are checked for partition
179 -- consistency by default, so this distinction is only needed in the
180 -- case of Boolean restrictions.
182 subtype Cunit_Boolean_Restrictions
is All_Boolean_Restrictions
range
183 Immediate_Reclamation
.. No_Wide_Characters
;
184 -- Boolean restrictions that are not checked for partition consistency
185 -- and that thus apply only to the current unit. Note that for these
186 -- restrictions, the compiler does not apply restrictions found in
187 -- with'ed units, parent specs etc to the main unit.
189 subtype All_Parameter_Restrictions
is
191 Max_Protected_Entries
.. Max_Storage_At_Blocking
;
192 -- All restrictions that are take a parameter
194 subtype Checked_Parameter_Restrictions
is
195 All_Parameter_Restrictions
range
196 Max_Protected_Entries
.. Max_Entry_Queue_Length
;
197 -- These are the parameter restrictions that can be at least partially
198 -- checked at compile/binder time. Minimally, the compiler can detect
199 -- violations of a restriction pragma with a value of zero reliably.
201 subtype Checked_Max_Parameter_Restrictions
is
202 Checked_Parameter_Restrictions
range
203 Max_Protected_Entries
.. Max_Task_Entries
;
204 -- Restrictions with parameters that can be checked in some cases by
205 -- maximizing among statically detected instances where the compiler
206 -- can determine the count.
208 subtype Checked_Add_Parameter_Restrictions
is
209 Checked_Parameter_Restrictions
range
210 Max_Tasks
.. Max_Tasks
;
211 -- Restrictions with parameters that can be checked in some cases by
212 -- summing the statically detected instances where the compiler can
213 -- determine the count.
215 subtype Checked_Val_Parameter_Restrictions
is
216 Checked_Parameter_Restrictions
range
217 Max_Protected_Entries
.. Max_Tasks
;
218 -- Restrictions with parameter where the count is known at least in
219 -- some cases by the compiler/binder.
221 subtype Checked_Zero_Parameter_Restrictions
is
222 Checked_Parameter_Restrictions
range
223 Max_Asynchronous_Select_Nesting
.. Max_Entry_Queue_Length
;
224 -- Restrictions with parameters where the compiler can detect the use of
225 -- the feature, and hence violations of a restriction specifying a value
226 -- of zero, but cannot detect specific values other than zero/nonzero.
228 subtype Unchecked_Parameter_Restrictions
is
229 All_Parameter_Restrictions
range
230 Max_Storage_At_Blocking
.. Max_Storage_At_Blocking
;
231 -- Restrictions with parameters where the compiler cannot ever detect
232 -- corresponding compile time usage, so the binder and compiler never
233 -- detect violations of any restriction.
235 -------------------------------------
236 -- Restriction Status Declarations --
237 -------------------------------------
239 -- The following declarations are used to record the current status
240 -- or restrictions (for the current unit, or related units, at compile
241 -- time, and for all units in a partition at bind time or run time).
243 type Restriction_Flags
is array (All_Restrictions
) of Boolean;
244 type Restriction_Values
is array (All_Parameter_Restrictions
) of Natural;
245 type Parameter_Flags
is array (All_Parameter_Restrictions
) of Boolean;
247 type Restrictions_Info
is record
248 Set
: Restriction_Flags
;
249 -- An entry is True in the Set array if a restrictions pragma has
250 -- been encountered for the given restriction. If the value is
251 -- True for a parameter restriction, then the corresponding entry
252 -- in the Value array gives the minimum value encountered for any
255 Value
: Restriction_Values
;
256 -- If the entry for a parameter restriction in Set is True (i.e. a
257 -- restrictions pragma for the restriction has been encountered), then
258 -- the corresponding entry in the Value array is the minimum value
259 -- specified by any such restrictions pragma. Note that a restrictions
260 -- pragma specifying a value greater than Int'Last is simply ignored.
262 Violated
: Restriction_Flags
;
263 -- An entry is True in the violations array if the compiler has
264 -- detected a violation of the restriction. For a parameter
265 -- restriction, the Count and Unknown arrays have additional
268 Count
: Restriction_Values
;
269 -- If an entry for a parameter restriction is True in Violated,
270 -- the corresponding entry in the Count array may record additional
271 -- information. If the actual minimum count is known (by taking
272 -- maximums, or sums, depending on the restriction), it will be
273 -- recorded in this array. If not, then the value will remain zero.
275 Unknown
: Parameter_Flags
;
276 -- If an entry for a parameter restriction is True in Violated,
277 -- the corresponding entry in the Unknown array may record additional
278 -- information. If the actual count is not known by the compiler (but
279 -- is known to be non-zero), then the entry in Unknown will be True.
280 -- This indicates that the value in Count is not known to be exact,
281 -- and the actual violation count may be higher.
283 -- Note: If Violated (K) is True, then either Count (K) > 0 or
284 -- Unknown (K) = True. It is possible for both these to be set.
285 -- For example, if Count (K) = 3 and Unknown (K) is True, it means
286 -- that the actual violation count is at least 3 but might be higher.
289 No_Restrictions
: constant Restrictions_Info
:=
290 (Set
=> (others => False),
291 Value
=> (others => 0),
292 Violated
=> (others => False),
293 Count
=> (others => 0),
294 Unknown
=> (others => False));
295 -- Used to initialize Restrictions_Info variables
297 ----------------------------------
298 -- Profile Definitions and Data --
299 ----------------------------------
301 type Profile_Name
is (Ravenscar
, Restricted
);
302 -- Names of recognized pfofiles
304 type Profile_Data
is record
305 Set
: Restriction_Flags
;
306 -- Set to True if given restriction must be set for the profile,
307 -- and False if it need not be set (False does not mean that it
308 -- must not be set, just that it need not be set). If the flag
309 -- is True for a parameter restriction, then the Value array
310 -- gives the maximum value permitted by the profile.
312 Value
: Restriction_Values
;
313 -- An entry in this array is meaningful only if the corresponding
314 -- flag in Set is True. In that case, the value in this array is
315 -- the maximum value of the parameter permitted by the profile.
318 Profile_Info
: array (Profile_Name
) of Profile_Data
:=
320 -- Restricted Profile
324 -- Restrictions for Restricted profile
327 (No_Abort_Statements
=> True,
328 No_Asynchronous_Control
=> True,
329 No_Dynamic_Attachment
=> True,
330 No_Dynamic_Priorities
=> True,
331 No_Entry_Queue
=> True,
332 No_Local_Protected_Objects
=> True,
333 No_Protected_Type_Allocators
=> True,
334 No_Requeue_Statements
=> True,
335 No_Task_Allocators
=> True,
336 No_Task_Attributes_Package
=> True,
337 No_Task_Hierarchy
=> True,
338 No_Terminate_Alternatives
=> True,
339 Max_Asynchronous_Select_Nesting
=> True,
340 Max_Protected_Entries
=> True,
341 Max_Select_Alternatives
=> True,
342 Max_Task_Entries
=> True,
345 -- Value settings for Restricted profile
348 (Max_Asynchronous_Select_Nesting
=> 0,
349 Max_Protected_Entries
=> 1,
350 Max_Select_Alternatives
=> 0,
351 Max_Task_Entries
=> 0,
356 -- Note: the table entries here only represent the
357 -- required restriction profile for Ravenscar. The
358 -- full Ravenscar profile also requires:
360 -- pragma Dispatching_Policy (FIFO_Within_Priorities);
361 -- pragma Locking_Policy (Ceiling_Locking);
362 -- pragma Detect_Blocking
366 -- Restrictions for Ravenscar = Restricted profile ..
369 (No_Abort_Statements
=> True,
370 No_Asynchronous_Control
=> True,
371 No_Dynamic_Attachment
=> True,
372 No_Dynamic_Priorities
=> True,
373 No_Entry_Queue
=> True,
374 No_Local_Protected_Objects
=> True,
375 No_Protected_Type_Allocators
=> True,
376 No_Requeue_Statements
=> True,
377 No_Task_Allocators
=> True,
378 No_Task_Attributes_Package
=> True,
379 No_Task_Hierarchy
=> True,
380 No_Terminate_Alternatives
=> True,
381 Max_Asynchronous_Select_Nesting
=> True,
382 Max_Protected_Entries
=> True,
383 Max_Select_Alternatives
=> True,
384 Max_Task_Entries
=> True,
386 -- plus these additional restrictions:
389 No_Implicit_Heap_Allocations
=> True,
390 No_Relative_Delay
=> True,
391 No_Select_Statements
=> True,
392 No_Task_Termination
=> True,
393 Simple_Barriers
=> True,
396 -- Value settings for Ravenscar (same as Restricted)
399 (Max_Asynchronous_Select_Nesting
=> 0,
400 Max_Protected_Entries
=> 1,
401 Max_Select_Alternatives
=> 0,
402 Max_Task_Entries
=> 0,