1 /* Convert RTL to assembler code and output it, for GNU compiler.
2 Copyright (C) 1987, 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997,
3 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
4 Free Software Foundation, Inc.
6 This file is part of GCC.
8 GCC is free software; you can redistribute it and/or modify it under
9 the terms of the GNU General Public License as published by the Free
10 Software Foundation; either version 3, or (at your option) any later
13 GCC is distributed in the hope that it will be useful, but WITHOUT ANY
14 WARRANTY; without even the implied warranty of MERCHANTABILITY or
15 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
18 You should have received a copy of the GNU General Public License
19 along with GCC; see the file COPYING3. If not see
20 <http://www.gnu.org/licenses/>. */
22 /* This is the final pass of the compiler.
23 It looks at the rtl code for a function and outputs assembler code.
25 Call `final_start_function' to output the assembler code for function entry,
26 `final' to output assembler code for some RTL code,
27 `final_end_function' to output assembler code for function exit.
28 If a function is compiled in several pieces, each piece is
29 output separately with `final'.
31 Some optimizations are also done at this level.
32 Move instructions that were made unnecessary by good register allocation
33 are detected and omitted from the output. (Though most of these
34 are removed by the last jump pass.)
36 Instructions to set the condition codes are omitted when it can be
37 seen that the condition codes already had the desired values.
39 In some cases it is sufficient if the inherited condition codes
40 have related values, but this may require the following insn
41 (the one that tests the condition codes) to be modified.
43 The code for the function prologue and epilogue are generated
44 directly in assembler by the target functions function_prologue and
45 function_epilogue. Those instructions never exist as rtl. */
49 #include "coretypes.h"
56 #include "insn-config.h"
57 #include "insn-attr.h"
59 #include "conditions.h"
62 #include "hard-reg-set.h"
69 #include "basic-block.h"
73 #include "cfglayout.h"
74 #include "tree-pass.h"
75 #include "tree-flow.h"
85 #ifdef XCOFF_DEBUGGING_INFO
86 #include "xcoffout.h" /* Needed for external data
87 declarations for e.g. AIX 4.x. */
90 #if defined (DWARF2_UNWIND_INFO) || defined (DWARF2_DEBUGGING_INFO)
91 #include "dwarf2out.h"
94 #ifdef DBX_DEBUGGING_INFO
98 #ifdef SDB_DEBUGGING_INFO
102 /* If we aren't using cc0, CC_STATUS_INIT shouldn't exist. So define a
103 null default for it to save conditionalization later. */
104 #ifndef CC_STATUS_INIT
105 #define CC_STATUS_INIT
108 /* How to start an assembler comment. */
109 #ifndef ASM_COMMENT_START
110 #define ASM_COMMENT_START ";#"
113 /* Is the given character a logical line separator for the assembler? */
114 #ifndef IS_ASM_LOGICAL_LINE_SEPARATOR
115 #define IS_ASM_LOGICAL_LINE_SEPARATOR(C, STR) ((C) == ';')
118 #ifndef JUMP_TABLES_IN_TEXT_SECTION
119 #define JUMP_TABLES_IN_TEXT_SECTION 0
122 /* Bitflags used by final_scan_insn. */
125 #define SEEN_EMITTED 4
127 /* Last insn processed by final_scan_insn. */
128 static rtx debug_insn
;
129 rtx current_output_insn
;
131 /* Line number of last NOTE. */
132 static int last_linenum
;
134 /* Last discriminator written to assembly. */
135 static int last_discriminator
;
137 /* Discriminator of current block. */
138 static int discriminator
;
140 /* Highest line number in current block. */
141 static int high_block_linenum
;
143 /* Likewise for function. */
144 static int high_function_linenum
;
146 /* Filename of last NOTE. */
147 static const char *last_filename
;
149 /* Override filename and line number. */
150 static const char *override_filename
;
151 static int override_linenum
;
153 /* Whether to force emission of a line note before the next insn. */
154 static bool force_source_line
= false;
156 extern const int length_unit_log
; /* This is defined in insn-attrtab.c. */
158 /* Nonzero while outputting an `asm' with operands.
159 This means that inconsistencies are the user's fault, so don't die.
160 The precise value is the insn being output, to pass to error_for_asm. */
161 rtx this_is_asm_operands
;
163 /* Number of operands of this insn, for an `asm' with operands. */
164 static unsigned int insn_noperands
;
166 /* Compare optimization flag. */
168 static rtx last_ignored_compare
= 0;
170 /* Assign a unique number to each insn that is output.
171 This can be used to generate unique local labels. */
173 static int insn_counter
= 0;
176 /* This variable contains machine-dependent flags (defined in tm.h)
177 set and examined by output routines
178 that describe how to interpret the condition codes properly. */
182 /* During output of an insn, this contains a copy of cc_status
183 from before the insn. */
185 CC_STATUS cc_prev_status
;
188 /* Number of unmatched NOTE_INSN_BLOCK_BEG notes we have seen. */
190 static int block_depth
;
192 /* Nonzero if have enabled APP processing of our assembler output. */
196 /* If we are outputting an insn sequence, this contains the sequence rtx.
201 #ifdef ASSEMBLER_DIALECT
203 /* Number of the assembler dialect to use, starting at 0. */
204 static int dialect_number
;
207 #ifdef HAVE_conditional_execution
208 /* Nonnull if the insn currently being emitted was a COND_EXEC pattern. */
209 rtx current_insn_predicate
;
212 #ifdef HAVE_ATTR_length
213 static int asm_insn_count (rtx
);
215 static void profile_function (FILE *);
216 static void profile_after_prologue (FILE *);
217 static bool notice_source_line (rtx
, bool *);
218 static rtx
walk_alter_subreg (rtx
*, bool *);
219 static void output_asm_name (void);
220 static void output_alternate_entry_point (FILE *, rtx
);
221 static tree
get_mem_expr_from_op (rtx
, int *);
222 static void output_asm_operand_names (rtx
*, int *, int);
223 static void output_operand (rtx
, int);
224 #ifdef LEAF_REGISTERS
225 static void leaf_renumber_regs (rtx
);
228 static int alter_cond (rtx
);
230 #ifndef ADDR_VEC_ALIGN
231 static int final_addr_vec_align (rtx
);
233 #ifdef HAVE_ATTR_length
234 static int align_fuzz (rtx
, rtx
, int, unsigned);
237 /* Initialize data in final at the beginning of a compilation. */
240 init_final (const char *filename ATTRIBUTE_UNUSED
)
245 #ifdef ASSEMBLER_DIALECT
246 dialect_number
= ASSEMBLER_DIALECT
;
250 /* Default target function prologue and epilogue assembler output.
252 If not overridden for epilogue code, then the function body itself
253 contains return instructions wherever needed. */
255 default_function_pro_epilogue (FILE *file ATTRIBUTE_UNUSED
,
256 HOST_WIDE_INT size ATTRIBUTE_UNUSED
)
260 /* Default target hook that outputs nothing to a stream. */
262 no_asm_to_stream (FILE *file ATTRIBUTE_UNUSED
)
266 /* Enable APP processing of subsequent output.
267 Used before the output from an `asm' statement. */
274 fputs (ASM_APP_ON
, asm_out_file
);
279 /* Disable APP processing of subsequent output.
280 Called from varasm.c before most kinds of output. */
287 fputs (ASM_APP_OFF
, asm_out_file
);
292 /* Return the number of slots filled in the current
293 delayed branch sequence (we don't count the insn needing the
294 delay slot). Zero if not in a delayed branch sequence. */
298 dbr_sequence_length (void)
300 if (final_sequence
!= 0)
301 return XVECLEN (final_sequence
, 0) - 1;
307 /* The next two pages contain routines used to compute the length of an insn
308 and to shorten branches. */
310 /* Arrays for insn lengths, and addresses. The latter is referenced by
311 `insn_current_length'. */
313 static int *insn_lengths
;
315 VEC(int,heap
) *insn_addresses_
;
317 /* Max uid for which the above arrays are valid. */
318 static int insn_lengths_max_uid
;
320 /* Address of insn being processed. Used by `insn_current_length'. */
321 int insn_current_address
;
323 /* Address of insn being processed in previous iteration. */
324 int insn_last_address
;
326 /* known invariant alignment of insn being processed. */
327 int insn_current_align
;
329 /* After shorten_branches, for any insn, uid_align[INSN_UID (insn)]
330 gives the next following alignment insn that increases the known
331 alignment, or NULL_RTX if there is no such insn.
332 For any alignment obtained this way, we can again index uid_align with
333 its uid to obtain the next following align that in turn increases the
334 alignment, till we reach NULL_RTX; the sequence obtained this way
335 for each insn we'll call the alignment chain of this insn in the following
338 struct label_alignment
344 static rtx
*uid_align
;
345 static int *uid_shuid
;
346 static struct label_alignment
*label_align
;
348 /* Indicate that branch shortening hasn't yet been done. */
351 init_insn_lengths (void)
362 insn_lengths_max_uid
= 0;
364 #ifdef HAVE_ATTR_length
365 INSN_ADDRESSES_FREE ();
374 /* Obtain the current length of an insn. If branch shortening has been done,
375 get its actual length. Otherwise, use FALLBACK_FN to calculate the
378 get_attr_length_1 (rtx insn ATTRIBUTE_UNUSED
,
379 int (*fallback_fn
) (rtx
) ATTRIBUTE_UNUSED
)
381 #ifdef HAVE_ATTR_length
386 if (insn_lengths_max_uid
> INSN_UID (insn
))
387 return insn_lengths
[INSN_UID (insn
)];
389 switch (GET_CODE (insn
))
397 length
= fallback_fn (insn
);
401 body
= PATTERN (insn
);
402 if (GET_CODE (body
) == ADDR_VEC
|| GET_CODE (body
) == ADDR_DIFF_VEC
)
404 /* Alignment is machine-dependent and should be handled by
408 length
= fallback_fn (insn
);
412 body
= PATTERN (insn
);
413 if (GET_CODE (body
) == USE
|| GET_CODE (body
) == CLOBBER
)
416 else if (GET_CODE (body
) == ASM_INPUT
|| asm_noperands (body
) >= 0)
417 length
= asm_insn_count (body
) * fallback_fn (insn
);
418 else if (GET_CODE (body
) == SEQUENCE
)
419 for (i
= 0; i
< XVECLEN (body
, 0); i
++)
420 length
+= get_attr_length_1 (XVECEXP (body
, 0, i
), fallback_fn
);
422 length
= fallback_fn (insn
);
429 #ifdef ADJUST_INSN_LENGTH
430 ADJUST_INSN_LENGTH (insn
, length
);
433 #else /* not HAVE_ATTR_length */
435 #define insn_default_length 0
436 #define insn_min_length 0
437 #endif /* not HAVE_ATTR_length */
440 /* Obtain the current length of an insn. If branch shortening has been done,
441 get its actual length. Otherwise, get its maximum length. */
443 get_attr_length (rtx insn
)
445 return get_attr_length_1 (insn
, insn_default_length
);
448 /* Obtain the current length of an insn. If branch shortening has been done,
449 get its actual length. Otherwise, get its minimum length. */
451 get_attr_min_length (rtx insn
)
453 return get_attr_length_1 (insn
, insn_min_length
);
456 /* Code to handle alignment inside shorten_branches. */
458 /* Here is an explanation how the algorithm in align_fuzz can give
461 Call a sequence of instructions beginning with alignment point X
462 and continuing until the next alignment point `block X'. When `X'
463 is used in an expression, it means the alignment value of the
466 Call the distance between the start of the first insn of block X, and
467 the end of the last insn of block X `IX', for the `inner size of X'.
468 This is clearly the sum of the instruction lengths.
470 Likewise with the next alignment-delimited block following X, which we
473 Call the distance between the start of the first insn of block X, and
474 the start of the first insn of block Y `OX', for the `outer size of X'.
476 The estimated padding is then OX - IX.
478 OX can be safely estimated as
483 OX = round_up(IX, X) + Y - X
485 Clearly est(IX) >= real(IX), because that only depends on the
486 instruction lengths, and those being overestimated is a given.
488 Clearly round_up(foo, Z) >= round_up(bar, Z) if foo >= bar, so
489 we needn't worry about that when thinking about OX.
491 When X >= Y, the alignment provided by Y adds no uncertainty factor
492 for branch ranges starting before X, so we can just round what we have.
493 But when X < Y, we don't know anything about the, so to speak,
494 `middle bits', so we have to assume the worst when aligning up from an
495 address mod X to one mod Y, which is Y - X. */
498 #define LABEL_ALIGN(LABEL) align_labels_log
501 #ifndef LABEL_ALIGN_MAX_SKIP
502 #define LABEL_ALIGN_MAX_SKIP align_labels_max_skip
506 #define LOOP_ALIGN(LABEL) align_loops_log
509 #ifndef LOOP_ALIGN_MAX_SKIP
510 #define LOOP_ALIGN_MAX_SKIP align_loops_max_skip
513 #ifndef LABEL_ALIGN_AFTER_BARRIER
514 #define LABEL_ALIGN_AFTER_BARRIER(LABEL) 0
517 #ifndef LABEL_ALIGN_AFTER_BARRIER_MAX_SKIP
518 #define LABEL_ALIGN_AFTER_BARRIER_MAX_SKIP 0
522 #define JUMP_ALIGN(LABEL) align_jumps_log
525 #ifndef JUMP_ALIGN_MAX_SKIP
526 #define JUMP_ALIGN_MAX_SKIP align_jumps_max_skip
529 #ifndef ADDR_VEC_ALIGN
531 final_addr_vec_align (rtx addr_vec
)
533 int align
= GET_MODE_SIZE (GET_MODE (PATTERN (addr_vec
)));
535 if (align
> BIGGEST_ALIGNMENT
/ BITS_PER_UNIT
)
536 align
= BIGGEST_ALIGNMENT
/ BITS_PER_UNIT
;
537 return exact_log2 (align
);
541 #define ADDR_VEC_ALIGN(ADDR_VEC) final_addr_vec_align (ADDR_VEC)
544 #ifndef INSN_LENGTH_ALIGNMENT
545 #define INSN_LENGTH_ALIGNMENT(INSN) length_unit_log
548 #define INSN_SHUID(INSN) (uid_shuid[INSN_UID (INSN)])
550 static int min_labelno
, max_labelno
;
552 #define LABEL_TO_ALIGNMENT(LABEL) \
553 (label_align[CODE_LABEL_NUMBER (LABEL) - min_labelno].alignment)
555 #define LABEL_TO_MAX_SKIP(LABEL) \
556 (label_align[CODE_LABEL_NUMBER (LABEL) - min_labelno].max_skip)
558 /* For the benefit of port specific code do this also as a function. */
561 label_to_alignment (rtx label
)
563 if (CODE_LABEL_NUMBER (label
) <= max_labelno
)
564 return LABEL_TO_ALIGNMENT (label
);
569 label_to_max_skip (rtx label
)
571 if (CODE_LABEL_NUMBER (label
) <= max_labelno
)
572 return LABEL_TO_MAX_SKIP (label
);
576 #ifdef HAVE_ATTR_length
577 /* The differences in addresses
578 between a branch and its target might grow or shrink depending on
579 the alignment the start insn of the range (the branch for a forward
580 branch or the label for a backward branch) starts out on; if these
581 differences are used naively, they can even oscillate infinitely.
582 We therefore want to compute a 'worst case' address difference that
583 is independent of the alignment the start insn of the range end
584 up on, and that is at least as large as the actual difference.
585 The function align_fuzz calculates the amount we have to add to the
586 naively computed difference, by traversing the part of the alignment
587 chain of the start insn of the range that is in front of the end insn
588 of the range, and considering for each alignment the maximum amount
589 that it might contribute to a size increase.
591 For casesi tables, we also want to know worst case minimum amounts of
592 address difference, in case a machine description wants to introduce
593 some common offset that is added to all offsets in a table.
594 For this purpose, align_fuzz with a growth argument of 0 computes the
595 appropriate adjustment. */
597 /* Compute the maximum delta by which the difference of the addresses of
598 START and END might grow / shrink due to a different address for start
599 which changes the size of alignment insns between START and END.
600 KNOWN_ALIGN_LOG is the alignment known for START.
601 GROWTH should be ~0 if the objective is to compute potential code size
602 increase, and 0 if the objective is to compute potential shrink.
603 The return value is undefined for any other value of GROWTH. */
606 align_fuzz (rtx start
, rtx end
, int known_align_log
, unsigned int growth
)
608 int uid
= INSN_UID (start
);
610 int known_align
= 1 << known_align_log
;
611 int end_shuid
= INSN_SHUID (end
);
614 for (align_label
= uid_align
[uid
]; align_label
; align_label
= uid_align
[uid
])
616 int align_addr
, new_align
;
618 uid
= INSN_UID (align_label
);
619 align_addr
= INSN_ADDRESSES (uid
) - insn_lengths
[uid
];
620 if (uid_shuid
[uid
] > end_shuid
)
622 known_align_log
= LABEL_TO_ALIGNMENT (align_label
);
623 new_align
= 1 << known_align_log
;
624 if (new_align
< known_align
)
626 fuzz
+= (-align_addr
^ growth
) & (new_align
- known_align
);
627 known_align
= new_align
;
632 /* Compute a worst-case reference address of a branch so that it
633 can be safely used in the presence of aligned labels. Since the
634 size of the branch itself is unknown, the size of the branch is
635 not included in the range. I.e. for a forward branch, the reference
636 address is the end address of the branch as known from the previous
637 branch shortening pass, minus a value to account for possible size
638 increase due to alignment. For a backward branch, it is the start
639 address of the branch as known from the current pass, plus a value
640 to account for possible size increase due to alignment.
641 NB.: Therefore, the maximum offset allowed for backward branches needs
642 to exclude the branch size. */
645 insn_current_reference_address (rtx branch
)
650 if (! INSN_ADDRESSES_SET_P ())
653 seq
= NEXT_INSN (PREV_INSN (branch
));
654 seq_uid
= INSN_UID (seq
);
655 if (!JUMP_P (branch
))
656 /* This can happen for example on the PA; the objective is to know the
657 offset to address something in front of the start of the function.
658 Thus, we can treat it like a backward branch.
659 We assume here that FUNCTION_BOUNDARY / BITS_PER_UNIT is larger than
660 any alignment we'd encounter, so we skip the call to align_fuzz. */
661 return insn_current_address
;
662 dest
= JUMP_LABEL (branch
);
664 /* BRANCH has no proper alignment chain set, so use SEQ.
665 BRANCH also has no INSN_SHUID. */
666 if (INSN_SHUID (seq
) < INSN_SHUID (dest
))
668 /* Forward branch. */
669 return (insn_last_address
+ insn_lengths
[seq_uid
]
670 - align_fuzz (seq
, dest
, length_unit_log
, ~0));
674 /* Backward branch. */
675 return (insn_current_address
676 + align_fuzz (dest
, seq
, length_unit_log
, ~0));
679 #endif /* HAVE_ATTR_length */
681 /* Compute branch alignments based on frequency information in the
685 compute_alignments (void)
687 int log
, max_skip
, max_log
;
690 int freq_threshold
= 0;
698 max_labelno
= max_label_num ();
699 min_labelno
= get_first_label_num ();
700 label_align
= XCNEWVEC (struct label_alignment
, max_labelno
- min_labelno
+ 1);
702 /* If not optimizing or optimizing for size, don't assign any alignments. */
703 if (! optimize
|| optimize_function_for_size_p (cfun
))
708 dump_flow_info (dump_file
, TDF_DETAILS
);
709 flow_loops_dump (dump_file
, NULL
, 1);
710 loop_optimizer_init (AVOID_CFG_MODIFICATIONS
);
713 if (bb
->frequency
> freq_max
)
714 freq_max
= bb
->frequency
;
715 freq_threshold
= freq_max
/ PARAM_VALUE (PARAM_ALIGN_THRESHOLD
);
718 fprintf(dump_file
, "freq_max: %i\n",freq_max
);
721 rtx label
= BB_HEAD (bb
);
722 int fallthru_frequency
= 0, branch_frequency
= 0, has_fallthru
= 0;
727 || optimize_bb_for_size_p (bb
))
730 fprintf(dump_file
, "BB %4i freq %4i loop %2i loop_depth %2i skipped.\n",
731 bb
->index
, bb
->frequency
, bb
->loop_father
->num
, bb
->loop_depth
);
734 max_log
= LABEL_ALIGN (label
);
735 max_skip
= LABEL_ALIGN_MAX_SKIP
;
737 FOR_EACH_EDGE (e
, ei
, bb
->preds
)
739 if (e
->flags
& EDGE_FALLTHRU
)
740 has_fallthru
= 1, fallthru_frequency
+= EDGE_FREQUENCY (e
);
742 branch_frequency
+= EDGE_FREQUENCY (e
);
746 fprintf(dump_file
, "BB %4i freq %4i loop %2i loop_depth %2i fall %4i branch %4i",
747 bb
->index
, bb
->frequency
, bb
->loop_father
->num
,
749 fallthru_frequency
, branch_frequency
);
750 if (!bb
->loop_father
->inner
&& bb
->loop_father
->num
)
751 fprintf (dump_file
, " inner_loop");
752 if (bb
->loop_father
->header
== bb
)
753 fprintf (dump_file
, " loop_header");
754 fprintf (dump_file
, "\n");
757 /* There are two purposes to align block with no fallthru incoming edge:
758 1) to avoid fetch stalls when branch destination is near cache boundary
759 2) to improve cache efficiency in case the previous block is not executed
760 (so it does not need to be in the cache).
762 We to catch first case, we align frequently executed blocks.
763 To catch the second, we align blocks that are executed more frequently
764 than the predecessor and the predecessor is likely to not be executed
765 when function is called. */
768 && (branch_frequency
> freq_threshold
769 || (bb
->frequency
> bb
->prev_bb
->frequency
* 10
770 && (bb
->prev_bb
->frequency
771 <= ENTRY_BLOCK_PTR
->frequency
/ 2))))
773 log
= JUMP_ALIGN (label
);
775 fprintf(dump_file
, " jump alignment added.\n");
779 max_skip
= JUMP_ALIGN_MAX_SKIP
;
782 /* In case block is frequent and reached mostly by non-fallthru edge,
783 align it. It is most likely a first block of loop. */
785 && optimize_bb_for_speed_p (bb
)
786 && branch_frequency
+ fallthru_frequency
> freq_threshold
788 > fallthru_frequency
* PARAM_VALUE (PARAM_ALIGN_LOOP_ITERATIONS
)))
790 log
= LOOP_ALIGN (label
);
792 fprintf(dump_file
, " internal loop alignment added.\n");
796 max_skip
= LOOP_ALIGN_MAX_SKIP
;
799 LABEL_TO_ALIGNMENT (label
) = max_log
;
800 LABEL_TO_MAX_SKIP (label
) = max_skip
;
805 loop_optimizer_finalize ();
806 free_dominance_info (CDI_DOMINATORS
);
811 struct rtl_opt_pass pass_compute_alignments
=
815 "alignments", /* name */
817 compute_alignments
, /* execute */
820 0, /* static_pass_number */
822 0, /* properties_required */
823 0, /* properties_provided */
824 0, /* properties_destroyed */
825 0, /* todo_flags_start */
826 TODO_dump_func
| TODO_verify_rtl_sharing
827 | TODO_ggc_collect
/* todo_flags_finish */
832 /* Make a pass over all insns and compute their actual lengths by shortening
833 any branches of variable length if possible. */
835 /* shorten_branches might be called multiple times: for example, the SH
836 port splits out-of-range conditional branches in MACHINE_DEPENDENT_REORG.
837 In order to do this, it needs proper length information, which it obtains
838 by calling shorten_branches. This cannot be collapsed with
839 shorten_branches itself into a single pass unless we also want to integrate
840 reorg.c, since the branch splitting exposes new instructions with delay
844 shorten_branches (rtx first ATTRIBUTE_UNUSED
)
851 #ifdef HAVE_ATTR_length
852 #define MAX_CODE_ALIGN 16
854 int something_changed
= 1;
855 char *varying_length
;
858 rtx align_tab
[MAX_CODE_ALIGN
];
862 /* Compute maximum UID and allocate label_align / uid_shuid. */
863 max_uid
= get_max_uid ();
865 /* Free uid_shuid before reallocating it. */
868 uid_shuid
= XNEWVEC (int, max_uid
);
870 if (max_labelno
!= max_label_num ())
872 int old
= max_labelno
;
876 max_labelno
= max_label_num ();
878 n_labels
= max_labelno
- min_labelno
+ 1;
879 n_old_labels
= old
- min_labelno
+ 1;
881 label_align
= XRESIZEVEC (struct label_alignment
, label_align
, n_labels
);
883 /* Range of labels grows monotonically in the function. Failing here
884 means that the initialization of array got lost. */
885 gcc_assert (n_old_labels
<= n_labels
);
887 memset (label_align
+ n_old_labels
, 0,
888 (n_labels
- n_old_labels
) * sizeof (struct label_alignment
));
891 /* Initialize label_align and set up uid_shuid to be strictly
892 monotonically rising with insn order. */
893 /* We use max_log here to keep track of the maximum alignment we want to
894 impose on the next CODE_LABEL (or the current one if we are processing
895 the CODE_LABEL itself). */
900 for (insn
= get_insns (), i
= 1; insn
; insn
= NEXT_INSN (insn
))
904 INSN_SHUID (insn
) = i
++;
911 bool next_is_jumptable
;
913 /* Merge in alignments computed by compute_alignments. */
914 log
= LABEL_TO_ALIGNMENT (insn
);
918 max_skip
= LABEL_TO_MAX_SKIP (insn
);
921 next
= next_nonnote_insn (insn
);
922 next_is_jumptable
= next
&& JUMP_TABLE_DATA_P (next
);
923 if (!next_is_jumptable
)
925 log
= LABEL_ALIGN (insn
);
929 max_skip
= LABEL_ALIGN_MAX_SKIP
;
932 /* ADDR_VECs only take room if read-only data goes into the text
934 if ((JUMP_TABLES_IN_TEXT_SECTION
935 || readonly_data_section
== text_section
)
936 && next_is_jumptable
)
938 log
= ADDR_VEC_ALIGN (next
);
942 max_skip
= LABEL_ALIGN_MAX_SKIP
;
945 LABEL_TO_ALIGNMENT (insn
) = max_log
;
946 LABEL_TO_MAX_SKIP (insn
) = max_skip
;
950 else if (BARRIER_P (insn
))
954 for (label
= insn
; label
&& ! INSN_P (label
);
955 label
= NEXT_INSN (label
))
958 log
= LABEL_ALIGN_AFTER_BARRIER (insn
);
962 max_skip
= LABEL_ALIGN_AFTER_BARRIER_MAX_SKIP
;
968 #ifdef HAVE_ATTR_length
970 /* Allocate the rest of the arrays. */
971 insn_lengths
= XNEWVEC (int, max_uid
);
972 insn_lengths_max_uid
= max_uid
;
973 /* Syntax errors can lead to labels being outside of the main insn stream.
974 Initialize insn_addresses, so that we get reproducible results. */
975 INSN_ADDRESSES_ALLOC (max_uid
);
977 varying_length
= XCNEWVEC (char, max_uid
);
979 /* Initialize uid_align. We scan instructions
980 from end to start, and keep in align_tab[n] the last seen insn
981 that does an alignment of at least n+1, i.e. the successor
982 in the alignment chain for an insn that does / has a known
984 uid_align
= XCNEWVEC (rtx
, max_uid
);
986 for (i
= MAX_CODE_ALIGN
; --i
>= 0;)
987 align_tab
[i
] = NULL_RTX
;
988 seq
= get_last_insn ();
989 for (; seq
; seq
= PREV_INSN (seq
))
991 int uid
= INSN_UID (seq
);
993 log
= (LABEL_P (seq
) ? LABEL_TO_ALIGNMENT (seq
) : 0);
994 uid_align
[uid
] = align_tab
[0];
997 /* Found an alignment label. */
998 uid_align
[uid
] = align_tab
[log
];
999 for (i
= log
- 1; i
>= 0; i
--)
1003 #ifdef CASE_VECTOR_SHORTEN_MODE
1006 /* Look for ADDR_DIFF_VECs, and initialize their minimum and maximum
1009 int min_shuid
= INSN_SHUID (get_insns ()) - 1;
1010 int max_shuid
= INSN_SHUID (get_last_insn ()) + 1;
1013 for (insn
= first
; insn
!= 0; insn
= NEXT_INSN (insn
))
1015 rtx min_lab
= NULL_RTX
, max_lab
= NULL_RTX
, pat
;
1016 int len
, i
, min
, max
, insn_shuid
;
1018 addr_diff_vec_flags flags
;
1021 || GET_CODE (PATTERN (insn
)) != ADDR_DIFF_VEC
)
1023 pat
= PATTERN (insn
);
1024 len
= XVECLEN (pat
, 1);
1025 gcc_assert (len
> 0);
1026 min_align
= MAX_CODE_ALIGN
;
1027 for (min
= max_shuid
, max
= min_shuid
, i
= len
- 1; i
>= 0; i
--)
1029 rtx lab
= XEXP (XVECEXP (pat
, 1, i
), 0);
1030 int shuid
= INSN_SHUID (lab
);
1041 if (min_align
> LABEL_TO_ALIGNMENT (lab
))
1042 min_align
= LABEL_TO_ALIGNMENT (lab
);
1044 XEXP (pat
, 2) = gen_rtx_LABEL_REF (Pmode
, min_lab
);
1045 XEXP (pat
, 3) = gen_rtx_LABEL_REF (Pmode
, max_lab
);
1046 insn_shuid
= INSN_SHUID (insn
);
1047 rel
= INSN_SHUID (XEXP (XEXP (pat
, 0), 0));
1048 memset (&flags
, 0, sizeof (flags
));
1049 flags
.min_align
= min_align
;
1050 flags
.base_after_vec
= rel
> insn_shuid
;
1051 flags
.min_after_vec
= min
> insn_shuid
;
1052 flags
.max_after_vec
= max
> insn_shuid
;
1053 flags
.min_after_base
= min
> rel
;
1054 flags
.max_after_base
= max
> rel
;
1055 ADDR_DIFF_VEC_FLAGS (pat
) = flags
;
1058 #endif /* CASE_VECTOR_SHORTEN_MODE */
1060 /* Compute initial lengths, addresses, and varying flags for each insn. */
1061 for (insn_current_address
= 0, insn
= first
;
1063 insn_current_address
+= insn_lengths
[uid
], insn
= NEXT_INSN (insn
))
1065 uid
= INSN_UID (insn
);
1067 insn_lengths
[uid
] = 0;
1071 int log
= LABEL_TO_ALIGNMENT (insn
);
1074 int align
= 1 << log
;
1075 int new_address
= (insn_current_address
+ align
- 1) & -align
;
1076 insn_lengths
[uid
] = new_address
- insn_current_address
;
1080 INSN_ADDRESSES (uid
) = insn_current_address
+ insn_lengths
[uid
];
1082 if (NOTE_P (insn
) || BARRIER_P (insn
)
1085 if (INSN_DELETED_P (insn
))
1088 body
= PATTERN (insn
);
1089 if (GET_CODE (body
) == ADDR_VEC
|| GET_CODE (body
) == ADDR_DIFF_VEC
)
1091 /* This only takes room if read-only data goes into the text
1093 if (JUMP_TABLES_IN_TEXT_SECTION
1094 || readonly_data_section
== text_section
)
1095 insn_lengths
[uid
] = (XVECLEN (body
,
1096 GET_CODE (body
) == ADDR_DIFF_VEC
)
1097 * GET_MODE_SIZE (GET_MODE (body
)));
1098 /* Alignment is handled by ADDR_VEC_ALIGN. */
1100 else if (GET_CODE (body
) == ASM_INPUT
|| asm_noperands (body
) >= 0)
1101 insn_lengths
[uid
] = asm_insn_count (body
) * insn_default_length (insn
);
1102 else if (GET_CODE (body
) == SEQUENCE
)
1105 int const_delay_slots
;
1107 const_delay_slots
= const_num_delay_slots (XVECEXP (body
, 0, 0));
1109 const_delay_slots
= 0;
1111 /* Inside a delay slot sequence, we do not do any branch shortening
1112 if the shortening could change the number of delay slots
1114 for (i
= 0; i
< XVECLEN (body
, 0); i
++)
1116 rtx inner_insn
= XVECEXP (body
, 0, i
);
1117 int inner_uid
= INSN_UID (inner_insn
);
1120 if (GET_CODE (body
) == ASM_INPUT
1121 || asm_noperands (PATTERN (XVECEXP (body
, 0, i
))) >= 0)
1122 inner_length
= (asm_insn_count (PATTERN (inner_insn
))
1123 * insn_default_length (inner_insn
));
1125 inner_length
= insn_default_length (inner_insn
);
1127 insn_lengths
[inner_uid
] = inner_length
;
1128 if (const_delay_slots
)
1130 if ((varying_length
[inner_uid
]
1131 = insn_variable_length_p (inner_insn
)) != 0)
1132 varying_length
[uid
] = 1;
1133 INSN_ADDRESSES (inner_uid
) = (insn_current_address
1134 + insn_lengths
[uid
]);
1137 varying_length
[inner_uid
] = 0;
1138 insn_lengths
[uid
] += inner_length
;
1141 else if (GET_CODE (body
) != USE
&& GET_CODE (body
) != CLOBBER
)
1143 insn_lengths
[uid
] = insn_default_length (insn
);
1144 varying_length
[uid
] = insn_variable_length_p (insn
);
1147 /* If needed, do any adjustment. */
1148 #ifdef ADJUST_INSN_LENGTH
1149 ADJUST_INSN_LENGTH (insn
, insn_lengths
[uid
]);
1150 if (insn_lengths
[uid
] < 0)
1151 fatal_insn ("negative insn length", insn
);
1155 /* Now loop over all the insns finding varying length insns. For each,
1156 get the current insn length. If it has changed, reflect the change.
1157 When nothing changes for a full pass, we are done. */
1159 while (something_changed
)
1161 something_changed
= 0;
1162 insn_current_align
= MAX_CODE_ALIGN
- 1;
1163 for (insn_current_address
= 0, insn
= first
;
1165 insn
= NEXT_INSN (insn
))
1168 #ifdef ADJUST_INSN_LENGTH
1173 uid
= INSN_UID (insn
);
1177 int log
= LABEL_TO_ALIGNMENT (insn
);
1178 if (log
> insn_current_align
)
1180 int align
= 1 << log
;
1181 int new_address
= (insn_current_address
+ align
- 1) & -align
;
1182 insn_lengths
[uid
] = new_address
- insn_current_address
;
1183 insn_current_align
= log
;
1184 insn_current_address
= new_address
;
1187 insn_lengths
[uid
] = 0;
1188 INSN_ADDRESSES (uid
) = insn_current_address
;
1192 length_align
= INSN_LENGTH_ALIGNMENT (insn
);
1193 if (length_align
< insn_current_align
)
1194 insn_current_align
= length_align
;
1196 insn_last_address
= INSN_ADDRESSES (uid
);
1197 INSN_ADDRESSES (uid
) = insn_current_address
;
1199 #ifdef CASE_VECTOR_SHORTEN_MODE
1200 if (optimize
&& JUMP_P (insn
)
1201 && GET_CODE (PATTERN (insn
)) == ADDR_DIFF_VEC
)
1203 rtx body
= PATTERN (insn
);
1204 int old_length
= insn_lengths
[uid
];
1205 rtx rel_lab
= XEXP (XEXP (body
, 0), 0);
1206 rtx min_lab
= XEXP (XEXP (body
, 2), 0);
1207 rtx max_lab
= XEXP (XEXP (body
, 3), 0);
1208 int rel_addr
= INSN_ADDRESSES (INSN_UID (rel_lab
));
1209 int min_addr
= INSN_ADDRESSES (INSN_UID (min_lab
));
1210 int max_addr
= INSN_ADDRESSES (INSN_UID (max_lab
));
1213 addr_diff_vec_flags flags
;
1215 /* Avoid automatic aggregate initialization. */
1216 flags
= ADDR_DIFF_VEC_FLAGS (body
);
1218 /* Try to find a known alignment for rel_lab. */
1219 for (prev
= rel_lab
;
1221 && ! insn_lengths
[INSN_UID (prev
)]
1222 && ! (varying_length
[INSN_UID (prev
)] & 1);
1223 prev
= PREV_INSN (prev
))
1224 if (varying_length
[INSN_UID (prev
)] & 2)
1226 rel_align
= LABEL_TO_ALIGNMENT (prev
);
1230 /* See the comment on addr_diff_vec_flags in rtl.h for the
1231 meaning of the flags values. base: REL_LAB vec: INSN */
1232 /* Anything after INSN has still addresses from the last
1233 pass; adjust these so that they reflect our current
1234 estimate for this pass. */
1235 if (flags
.base_after_vec
)
1236 rel_addr
+= insn_current_address
- insn_last_address
;
1237 if (flags
.min_after_vec
)
1238 min_addr
+= insn_current_address
- insn_last_address
;
1239 if (flags
.max_after_vec
)
1240 max_addr
+= insn_current_address
- insn_last_address
;
1241 /* We want to know the worst case, i.e. lowest possible value
1242 for the offset of MIN_LAB. If MIN_LAB is after REL_LAB,
1243 its offset is positive, and we have to be wary of code shrink;
1244 otherwise, it is negative, and we have to be vary of code
1246 if (flags
.min_after_base
)
1248 /* If INSN is between REL_LAB and MIN_LAB, the size
1249 changes we are about to make can change the alignment
1250 within the observed offset, therefore we have to break
1251 it up into two parts that are independent. */
1252 if (! flags
.base_after_vec
&& flags
.min_after_vec
)
1254 min_addr
-= align_fuzz (rel_lab
, insn
, rel_align
, 0);
1255 min_addr
-= align_fuzz (insn
, min_lab
, 0, 0);
1258 min_addr
-= align_fuzz (rel_lab
, min_lab
, rel_align
, 0);
1262 if (flags
.base_after_vec
&& ! flags
.min_after_vec
)
1264 min_addr
-= align_fuzz (min_lab
, insn
, 0, ~0);
1265 min_addr
-= align_fuzz (insn
, rel_lab
, 0, ~0);
1268 min_addr
-= align_fuzz (min_lab
, rel_lab
, 0, ~0);
1270 /* Likewise, determine the highest lowest possible value
1271 for the offset of MAX_LAB. */
1272 if (flags
.max_after_base
)
1274 if (! flags
.base_after_vec
&& flags
.max_after_vec
)
1276 max_addr
+= align_fuzz (rel_lab
, insn
, rel_align
, ~0);
1277 max_addr
+= align_fuzz (insn
, max_lab
, 0, ~0);
1280 max_addr
+= align_fuzz (rel_lab
, max_lab
, rel_align
, ~0);
1284 if (flags
.base_after_vec
&& ! flags
.max_after_vec
)
1286 max_addr
+= align_fuzz (max_lab
, insn
, 0, 0);
1287 max_addr
+= align_fuzz (insn
, rel_lab
, 0, 0);
1290 max_addr
+= align_fuzz (max_lab
, rel_lab
, 0, 0);
1292 PUT_MODE (body
, CASE_VECTOR_SHORTEN_MODE (min_addr
- rel_addr
,
1293 max_addr
- rel_addr
,
1295 if (JUMP_TABLES_IN_TEXT_SECTION
1296 || readonly_data_section
== text_section
)
1299 = (XVECLEN (body
, 1) * GET_MODE_SIZE (GET_MODE (body
)));
1300 insn_current_address
+= insn_lengths
[uid
];
1301 if (insn_lengths
[uid
] != old_length
)
1302 something_changed
= 1;
1307 #endif /* CASE_VECTOR_SHORTEN_MODE */
1309 if (! (varying_length
[uid
]))
1311 if (NONJUMP_INSN_P (insn
)
1312 && GET_CODE (PATTERN (insn
)) == SEQUENCE
)
1316 body
= PATTERN (insn
);
1317 for (i
= 0; i
< XVECLEN (body
, 0); i
++)
1319 rtx inner_insn
= XVECEXP (body
, 0, i
);
1320 int inner_uid
= INSN_UID (inner_insn
);
1322 INSN_ADDRESSES (inner_uid
) = insn_current_address
;
1324 insn_current_address
+= insn_lengths
[inner_uid
];
1328 insn_current_address
+= insn_lengths
[uid
];
1333 if (NONJUMP_INSN_P (insn
) && GET_CODE (PATTERN (insn
)) == SEQUENCE
)
1337 body
= PATTERN (insn
);
1339 for (i
= 0; i
< XVECLEN (body
, 0); i
++)
1341 rtx inner_insn
= XVECEXP (body
, 0, i
);
1342 int inner_uid
= INSN_UID (inner_insn
);
1345 INSN_ADDRESSES (inner_uid
) = insn_current_address
;
1347 /* insn_current_length returns 0 for insns with a
1348 non-varying length. */
1349 if (! varying_length
[inner_uid
])
1350 inner_length
= insn_lengths
[inner_uid
];
1352 inner_length
= insn_current_length (inner_insn
);
1354 if (inner_length
!= insn_lengths
[inner_uid
])
1356 insn_lengths
[inner_uid
] = inner_length
;
1357 something_changed
= 1;
1359 insn_current_address
+= insn_lengths
[inner_uid
];
1360 new_length
+= inner_length
;
1365 new_length
= insn_current_length (insn
);
1366 insn_current_address
+= new_length
;
1369 #ifdef ADJUST_INSN_LENGTH
1370 /* If needed, do any adjustment. */
1371 tmp_length
= new_length
;
1372 ADJUST_INSN_LENGTH (insn
, new_length
);
1373 insn_current_address
+= (new_length
- tmp_length
);
1376 if (new_length
!= insn_lengths
[uid
])
1378 insn_lengths
[uid
] = new_length
;
1379 something_changed
= 1;
1382 /* For a non-optimizing compile, do only a single pass. */
1387 free (varying_length
);
1389 #endif /* HAVE_ATTR_length */
1392 #ifdef HAVE_ATTR_length
1393 /* Given the body of an INSN known to be generated by an ASM statement, return
1394 the number of machine instructions likely to be generated for this insn.
1395 This is used to compute its length. */
1398 asm_insn_count (rtx body
)
1403 if (GET_CODE (body
) == ASM_INPUT
)
1404 templ
= XSTR (body
, 0);
1406 templ
= decode_asm_operands (body
, NULL
, NULL
, NULL
, NULL
, NULL
);
1411 for (; *templ
; templ
++)
1412 if (IS_ASM_LOGICAL_LINE_SEPARATOR (*templ
, templ
)
1420 /* ??? This is probably the wrong place for these. */
1421 /* Structure recording the mapping from source file and directory
1422 names at compile time to those to be embedded in debug
1424 typedef struct debug_prefix_map
1426 const char *old_prefix
;
1427 const char *new_prefix
;
1430 struct debug_prefix_map
*next
;
1433 /* Linked list of such structures. */
1434 debug_prefix_map
*debug_prefix_maps
;
1437 /* Record a debug file prefix mapping. ARG is the argument to
1438 -fdebug-prefix-map and must be of the form OLD=NEW. */
1441 add_debug_prefix_map (const char *arg
)
1443 debug_prefix_map
*map
;
1446 p
= strchr (arg
, '=');
1449 error ("invalid argument %qs to -fdebug-prefix-map", arg
);
1452 map
= XNEW (debug_prefix_map
);
1453 map
->old_prefix
= ggc_alloc_string (arg
, p
- arg
);
1454 map
->old_len
= p
- arg
;
1456 map
->new_prefix
= ggc_strdup (p
);
1457 map
->new_len
= strlen (p
);
1458 map
->next
= debug_prefix_maps
;
1459 debug_prefix_maps
= map
;
1462 /* Perform user-specified mapping of debug filename prefixes. Return
1463 the new name corresponding to FILENAME. */
1466 remap_debug_filename (const char *filename
)
1468 debug_prefix_map
*map
;
1473 for (map
= debug_prefix_maps
; map
; map
= map
->next
)
1474 if (strncmp (filename
, map
->old_prefix
, map
->old_len
) == 0)
1478 name
= filename
+ map
->old_len
;
1479 name_len
= strlen (name
) + 1;
1480 s
= (char *) alloca (name_len
+ map
->new_len
);
1481 memcpy (s
, map
->new_prefix
, map
->new_len
);
1482 memcpy (s
+ map
->new_len
, name
, name_len
);
1483 return ggc_strdup (s
);
1486 /* Output assembler code for the start of a function,
1487 and initialize some of the variables in this file
1488 for the new function. The label for the function and associated
1489 assembler pseudo-ops have already been output in `assemble_start_function'.
1491 FIRST is the first insn of the rtl for the function being compiled.
1492 FILE is the file to write assembler code to.
1493 OPTIMIZE is nonzero if we should eliminate redundant
1494 test and compare insns. */
1497 final_start_function (rtx first ATTRIBUTE_UNUSED
, FILE *file
,
1498 int optimize ATTRIBUTE_UNUSED
)
1502 this_is_asm_operands
= 0;
1504 last_filename
= locator_file (prologue_locator
);
1505 last_linenum
= locator_line (prologue_locator
);
1506 last_discriminator
= discriminator
= 0;
1508 high_block_linenum
= high_function_linenum
= last_linenum
;
1510 (*debug_hooks
->begin_prologue
) (last_linenum
, last_filename
);
1512 #if defined (DWARF2_UNWIND_INFO) || defined (TARGET_UNWIND_INFO)
1513 if (write_symbols
!= DWARF2_DEBUG
&& write_symbols
!= VMS_AND_DWARF2_DEBUG
)
1514 dwarf2out_begin_prologue (0, NULL
);
1517 #ifdef LEAF_REG_REMAP
1518 if (current_function_uses_only_leaf_regs
)
1519 leaf_renumber_regs (first
);
1522 /* The Sun386i and perhaps other machines don't work right
1523 if the profiling code comes after the prologue. */
1524 #ifdef PROFILE_BEFORE_PROLOGUE
1526 profile_function (file
);
1527 #endif /* PROFILE_BEFORE_PROLOGUE */
1529 #if defined (DWARF2_UNWIND_INFO) && defined (HAVE_prologue)
1530 if (dwarf2out_do_frame ())
1531 dwarf2out_frame_debug (NULL_RTX
, false);
1534 /* If debugging, assign block numbers to all of the blocks in this
1538 reemit_insn_block_notes ();
1539 number_blocks (current_function_decl
);
1540 /* We never actually put out begin/end notes for the top-level
1541 block in the function. But, conceptually, that block is
1543 TREE_ASM_WRITTEN (DECL_INITIAL (current_function_decl
)) = 1;
1546 if (warn_frame_larger_than
1547 && get_frame_size () > frame_larger_than_size
)
1549 /* Issue a warning */
1550 warning (OPT_Wframe_larger_than_
,
1551 "the frame size of %wd bytes is larger than %wd bytes",
1552 get_frame_size (), frame_larger_than_size
);
1555 /* First output the function prologue: code to set up the stack frame. */
1556 targetm
.asm_out
.function_prologue (file
, get_frame_size ());
1558 /* If the machine represents the prologue as RTL, the profiling code must
1559 be emitted when NOTE_INSN_PROLOGUE_END is scanned. */
1560 #ifdef HAVE_prologue
1561 if (! HAVE_prologue
)
1563 profile_after_prologue (file
);
1567 profile_after_prologue (FILE *file ATTRIBUTE_UNUSED
)
1569 #ifndef PROFILE_BEFORE_PROLOGUE
1571 profile_function (file
);
1572 #endif /* not PROFILE_BEFORE_PROLOGUE */
1576 profile_function (FILE *file ATTRIBUTE_UNUSED
)
1578 #ifndef NO_PROFILE_COUNTERS
1579 # define NO_PROFILE_COUNTERS 0
1581 #if defined(ASM_OUTPUT_REG_PUSH)
1582 int sval
= cfun
->returns_struct
;
1583 rtx svrtx
= targetm
.calls
.struct_value_rtx (TREE_TYPE (current_function_decl
), 1);
1584 #if defined(STATIC_CHAIN_INCOMING_REGNUM) || defined(STATIC_CHAIN_REGNUM)
1585 int cxt
= cfun
->static_chain_decl
!= NULL
;
1587 #endif /* ASM_OUTPUT_REG_PUSH */
1589 if (! NO_PROFILE_COUNTERS
)
1591 int align
= MIN (BIGGEST_ALIGNMENT
, LONG_TYPE_SIZE
);
1592 switch_to_section (data_section
);
1593 ASM_OUTPUT_ALIGN (file
, floor_log2 (align
/ BITS_PER_UNIT
));
1594 targetm
.asm_out
.internal_label (file
, "LP", current_function_funcdef_no
);
1595 assemble_integer (const0_rtx
, LONG_TYPE_SIZE
/ BITS_PER_UNIT
, align
, 1);
1598 switch_to_section (current_function_section ());
1600 #if defined(ASM_OUTPUT_REG_PUSH)
1601 if (sval
&& svrtx
!= NULL_RTX
&& REG_P (svrtx
))
1603 ASM_OUTPUT_REG_PUSH (file
, REGNO (svrtx
));
1607 #if defined(STATIC_CHAIN_INCOMING_REGNUM) && defined(ASM_OUTPUT_REG_PUSH)
1609 ASM_OUTPUT_REG_PUSH (file
, STATIC_CHAIN_INCOMING_REGNUM
);
1611 #if defined(STATIC_CHAIN_REGNUM) && defined(ASM_OUTPUT_REG_PUSH)
1614 ASM_OUTPUT_REG_PUSH (file
, STATIC_CHAIN_REGNUM
);
1619 FUNCTION_PROFILER (file
, current_function_funcdef_no
);
1621 #if defined(STATIC_CHAIN_INCOMING_REGNUM) && defined(ASM_OUTPUT_REG_PUSH)
1623 ASM_OUTPUT_REG_POP (file
, STATIC_CHAIN_INCOMING_REGNUM
);
1625 #if defined(STATIC_CHAIN_REGNUM) && defined(ASM_OUTPUT_REG_PUSH)
1628 ASM_OUTPUT_REG_POP (file
, STATIC_CHAIN_REGNUM
);
1633 #if defined(ASM_OUTPUT_REG_PUSH)
1634 if (sval
&& svrtx
!= NULL_RTX
&& REG_P (svrtx
))
1636 ASM_OUTPUT_REG_POP (file
, REGNO (svrtx
));
1641 /* Output assembler code for the end of a function.
1642 For clarity, args are same as those of `final_start_function'
1643 even though not all of them are needed. */
1646 final_end_function (void)
1650 (*debug_hooks
->end_function
) (high_function_linenum
);
1652 /* Finally, output the function epilogue:
1653 code to restore the stack frame and return to the caller. */
1654 targetm
.asm_out
.function_epilogue (asm_out_file
, get_frame_size ());
1656 /* And debug output. */
1657 (*debug_hooks
->end_epilogue
) (last_linenum
, last_filename
);
1659 #if defined (DWARF2_UNWIND_INFO)
1660 if (write_symbols
!= DWARF2_DEBUG
&& write_symbols
!= VMS_AND_DWARF2_DEBUG
1661 && dwarf2out_do_frame ())
1662 dwarf2out_end_epilogue (last_linenum
, last_filename
);
1666 /* Output assembler code for some insns: all or part of a function.
1667 For description of args, see `final_start_function', above. */
1670 final (rtx first
, FILE *file
, int optimize
)
1676 last_ignored_compare
= 0;
1678 for (insn
= first
; insn
; insn
= NEXT_INSN (insn
))
1680 if (INSN_UID (insn
) > max_uid
) /* Find largest UID. */
1681 max_uid
= INSN_UID (insn
);
1683 /* If CC tracking across branches is enabled, record the insn which
1684 jumps to each branch only reached from one place. */
1685 if (optimize
&& JUMP_P (insn
))
1687 rtx lab
= JUMP_LABEL (insn
);
1688 if (lab
&& LABEL_NUSES (lab
) == 1)
1690 LABEL_REFS (lab
) = insn
;
1700 /* Output the insns. */
1701 for (insn
= first
; insn
;)
1703 #ifdef HAVE_ATTR_length
1704 if ((unsigned) INSN_UID (insn
) >= INSN_ADDRESSES_SIZE ())
1706 /* This can be triggered by bugs elsewhere in the compiler if
1707 new insns are created after init_insn_lengths is called. */
1708 gcc_assert (NOTE_P (insn
));
1709 insn_current_address
= -1;
1712 insn_current_address
= INSN_ADDRESSES (INSN_UID (insn
));
1713 #endif /* HAVE_ATTR_length */
1715 insn
= final_scan_insn (insn
, file
, optimize
, 0, &seen
);
1720 get_insn_template (int code
, rtx insn
)
1722 switch (insn_data
[code
].output_format
)
1724 case INSN_OUTPUT_FORMAT_SINGLE
:
1725 return insn_data
[code
].output
.single
;
1726 case INSN_OUTPUT_FORMAT_MULTI
:
1727 return insn_data
[code
].output
.multi
[which_alternative
];
1728 case INSN_OUTPUT_FORMAT_FUNCTION
:
1730 return (*insn_data
[code
].output
.function
) (recog_data
.operand
, insn
);
1737 /* Emit the appropriate declaration for an alternate-entry-point
1738 symbol represented by INSN, to FILE. INSN is a CODE_LABEL with
1739 LABEL_KIND != LABEL_NORMAL.
1741 The case fall-through in this function is intentional. */
1743 output_alternate_entry_point (FILE *file
, rtx insn
)
1745 const char *name
= LABEL_NAME (insn
);
1747 switch (LABEL_KIND (insn
))
1749 case LABEL_WEAK_ENTRY
:
1750 #ifdef ASM_WEAKEN_LABEL
1751 ASM_WEAKEN_LABEL (file
, name
);
1753 case LABEL_GLOBAL_ENTRY
:
1754 targetm
.asm_out
.globalize_label (file
, name
);
1755 case LABEL_STATIC_ENTRY
:
1756 #ifdef ASM_OUTPUT_TYPE_DIRECTIVE
1757 ASM_OUTPUT_TYPE_DIRECTIVE (file
, name
, "function");
1759 ASM_OUTPUT_LABEL (file
, name
);
1768 /* Given a CALL_INSN, find and return the nested CALL. */
1770 call_from_call_insn (rtx insn
)
1773 gcc_assert (CALL_P (insn
));
1776 while (GET_CODE (x
) != CALL
)
1778 switch (GET_CODE (x
))
1783 x
= COND_EXEC_CODE (x
);
1786 x
= XVECEXP (x
, 0, 0);
1796 /* The final scan for one insn, INSN.
1797 Args are same as in `final', except that INSN
1798 is the insn being scanned.
1799 Value returned is the next insn to be scanned.
1801 NOPEEPHOLES is the flag to disallow peephole processing (currently
1802 used for within delayed branch sequence output).
1804 SEEN is used to track the end of the prologue, for emitting
1805 debug information. We force the emission of a line note after
1806 both NOTE_INSN_PROLOGUE_END and NOTE_INSN_FUNCTION_BEG, or
1807 at the beginning of the second basic block, whichever comes
1811 final_scan_insn (rtx insn
, FILE *file
, int optimize ATTRIBUTE_UNUSED
,
1812 int nopeepholes ATTRIBUTE_UNUSED
, int *seen
)
1821 /* Ignore deleted insns. These can occur when we split insns (due to a
1822 template of "#") while not optimizing. */
1823 if (INSN_DELETED_P (insn
))
1824 return NEXT_INSN (insn
);
1826 switch (GET_CODE (insn
))
1829 switch (NOTE_KIND (insn
))
1831 case NOTE_INSN_DELETED
:
1834 case NOTE_INSN_SWITCH_TEXT_SECTIONS
:
1835 in_cold_section_p
= !in_cold_section_p
;
1836 #ifdef DWARF2_UNWIND_INFO
1837 if (dwarf2out_do_frame ())
1838 dwarf2out_switch_text_section ();
1841 (*debug_hooks
->switch_text_section
) ();
1843 switch_to_section (current_function_section ());
1846 case NOTE_INSN_BASIC_BLOCK
:
1847 #ifdef TARGET_UNWIND_INFO
1848 targetm
.asm_out
.unwind_emit (asm_out_file
, insn
);
1852 fprintf (asm_out_file
, "\t%s basic block %d\n",
1853 ASM_COMMENT_START
, NOTE_BASIC_BLOCK (insn
)->index
);
1855 if ((*seen
& (SEEN_EMITTED
| SEEN_BB
)) == SEEN_BB
)
1857 *seen
|= SEEN_EMITTED
;
1858 force_source_line
= true;
1863 discriminator
= NOTE_BASIC_BLOCK (insn
)->discriminator
;
1867 case NOTE_INSN_EH_REGION_BEG
:
1868 ASM_OUTPUT_DEBUG_LABEL (asm_out_file
, "LEHB",
1869 NOTE_EH_HANDLER (insn
));
1872 case NOTE_INSN_EH_REGION_END
:
1873 ASM_OUTPUT_DEBUG_LABEL (asm_out_file
, "LEHE",
1874 NOTE_EH_HANDLER (insn
));
1877 case NOTE_INSN_PROLOGUE_END
:
1878 targetm
.asm_out
.function_end_prologue (file
);
1879 profile_after_prologue (file
);
1881 if ((*seen
& (SEEN_EMITTED
| SEEN_NOTE
)) == SEEN_NOTE
)
1883 *seen
|= SEEN_EMITTED
;
1884 force_source_line
= true;
1891 case NOTE_INSN_EPILOGUE_BEG
:
1892 #if defined (DWARF2_UNWIND_INFO) && defined (HAVE_epilogue)
1893 if (dwarf2out_do_frame ())
1894 dwarf2out_begin_epilogue (insn
);
1896 targetm
.asm_out
.function_begin_epilogue (file
);
1899 case NOTE_INSN_CFA_RESTORE_STATE
:
1900 #if defined (DWARF2_UNWIND_INFO)
1901 dwarf2out_frame_debug_restore_state ();
1905 case NOTE_INSN_FUNCTION_BEG
:
1907 (*debug_hooks
->end_prologue
) (last_linenum
, last_filename
);
1909 if ((*seen
& (SEEN_EMITTED
| SEEN_NOTE
)) == SEEN_NOTE
)
1911 *seen
|= SEEN_EMITTED
;
1912 force_source_line
= true;
1919 case NOTE_INSN_BLOCK_BEG
:
1920 if (debug_info_level
== DINFO_LEVEL_NORMAL
1921 || debug_info_level
== DINFO_LEVEL_VERBOSE
1922 || write_symbols
== DWARF2_DEBUG
1923 || write_symbols
== VMS_AND_DWARF2_DEBUG
1924 || write_symbols
== VMS_DEBUG
)
1926 int n
= BLOCK_NUMBER (NOTE_BLOCK (insn
));
1930 high_block_linenum
= last_linenum
;
1932 /* Output debugging info about the symbol-block beginning. */
1933 (*debug_hooks
->begin_block
) (last_linenum
, n
);
1935 /* Mark this block as output. */
1936 TREE_ASM_WRITTEN (NOTE_BLOCK (insn
)) = 1;
1938 if (write_symbols
== DBX_DEBUG
1939 || write_symbols
== SDB_DEBUG
)
1941 location_t
*locus_ptr
1942 = block_nonartificial_location (NOTE_BLOCK (insn
));
1944 if (locus_ptr
!= NULL
)
1946 override_filename
= LOCATION_FILE (*locus_ptr
);
1947 override_linenum
= LOCATION_LINE (*locus_ptr
);
1952 case NOTE_INSN_BLOCK_END
:
1953 if (debug_info_level
== DINFO_LEVEL_NORMAL
1954 || debug_info_level
== DINFO_LEVEL_VERBOSE
1955 || write_symbols
== DWARF2_DEBUG
1956 || write_symbols
== VMS_AND_DWARF2_DEBUG
1957 || write_symbols
== VMS_DEBUG
)
1959 int n
= BLOCK_NUMBER (NOTE_BLOCK (insn
));
1963 /* End of a symbol-block. */
1965 gcc_assert (block_depth
>= 0);
1967 (*debug_hooks
->end_block
) (high_block_linenum
, n
);
1969 if (write_symbols
== DBX_DEBUG
1970 || write_symbols
== SDB_DEBUG
)
1972 tree outer_block
= BLOCK_SUPERCONTEXT (NOTE_BLOCK (insn
));
1973 location_t
*locus_ptr
1974 = block_nonartificial_location (outer_block
);
1976 if (locus_ptr
!= NULL
)
1978 override_filename
= LOCATION_FILE (*locus_ptr
);
1979 override_linenum
= LOCATION_LINE (*locus_ptr
);
1983 override_filename
= NULL
;
1984 override_linenum
= 0;
1989 case NOTE_INSN_DELETED_LABEL
:
1990 /* Emit the label. We may have deleted the CODE_LABEL because
1991 the label could be proved to be unreachable, though still
1992 referenced (in the form of having its address taken. */
1993 ASM_OUTPUT_DEBUG_LABEL (file
, "L", CODE_LABEL_NUMBER (insn
));
1996 case NOTE_INSN_VAR_LOCATION
:
1997 (*debug_hooks
->var_location
) (insn
);
2007 #if defined (DWARF2_UNWIND_INFO)
2008 if (dwarf2out_do_frame ())
2009 dwarf2out_frame_debug (insn
, false);
2014 /* The target port might emit labels in the output function for
2015 some insn, e.g. sh.c output_branchy_insn. */
2016 if (CODE_LABEL_NUMBER (insn
) <= max_labelno
)
2018 int align
= LABEL_TO_ALIGNMENT (insn
);
2019 #ifdef ASM_OUTPUT_MAX_SKIP_ALIGN
2020 int max_skip
= LABEL_TO_MAX_SKIP (insn
);
2023 if (align
&& NEXT_INSN (insn
))
2025 #ifdef ASM_OUTPUT_MAX_SKIP_ALIGN
2026 ASM_OUTPUT_MAX_SKIP_ALIGN (file
, align
, max_skip
);
2028 #ifdef ASM_OUTPUT_ALIGN_WITH_NOP
2029 ASM_OUTPUT_ALIGN_WITH_NOP (file
, align
);
2031 ASM_OUTPUT_ALIGN (file
, align
);
2040 if (LABEL_NAME (insn
))
2041 (*debug_hooks
->label
) (insn
);
2045 next
= next_nonnote_insn (insn
);
2046 /* If this label is followed by a jump-table, make sure we put
2047 the label in the read-only section. Also possibly write the
2048 label and jump table together. */
2049 if (next
!= 0 && JUMP_TABLE_DATA_P (next
))
2051 #if defined(ASM_OUTPUT_ADDR_VEC) || defined(ASM_OUTPUT_ADDR_DIFF_VEC)
2052 /* In this case, the case vector is being moved by the
2053 target, so don't output the label at all. Leave that
2054 to the back end macros. */
2056 if (! JUMP_TABLES_IN_TEXT_SECTION
)
2060 switch_to_section (targetm
.asm_out
.function_rodata_section
2061 (current_function_decl
));
2063 #ifdef ADDR_VEC_ALIGN
2064 log_align
= ADDR_VEC_ALIGN (next
);
2066 log_align
= exact_log2 (BIGGEST_ALIGNMENT
/ BITS_PER_UNIT
);
2068 ASM_OUTPUT_ALIGN (file
, log_align
);
2071 switch_to_section (current_function_section ());
2073 #ifdef ASM_OUTPUT_CASE_LABEL
2074 ASM_OUTPUT_CASE_LABEL (file
, "L", CODE_LABEL_NUMBER (insn
),
2077 targetm
.asm_out
.internal_label (file
, "L", CODE_LABEL_NUMBER (insn
));
2082 if (LABEL_ALT_ENTRY_P (insn
))
2083 output_alternate_entry_point (file
, insn
);
2085 targetm
.asm_out
.internal_label (file
, "L", CODE_LABEL_NUMBER (insn
));
2090 rtx body
= PATTERN (insn
);
2091 int insn_code_number
;
2095 #ifdef HAVE_conditional_execution
2096 /* Reset this early so it is correct for ASM statements. */
2097 current_insn_predicate
= NULL_RTX
;
2099 /* An INSN, JUMP_INSN or CALL_INSN.
2100 First check for special kinds that recog doesn't recognize. */
2102 if (GET_CODE (body
) == USE
/* These are just declarations. */
2103 || GET_CODE (body
) == CLOBBER
)
2108 /* If there is a REG_CC_SETTER note on this insn, it means that
2109 the setting of the condition code was done in the delay slot
2110 of the insn that branched here. So recover the cc status
2111 from the insn that set it. */
2113 rtx note
= find_reg_note (insn
, REG_CC_SETTER
, NULL_RTX
);
2116 NOTICE_UPDATE_CC (PATTERN (XEXP (note
, 0)), XEXP (note
, 0));
2117 cc_prev_status
= cc_status
;
2122 /* Detect insns that are really jump-tables
2123 and output them as such. */
2125 if (GET_CODE (body
) == ADDR_VEC
|| GET_CODE (body
) == ADDR_DIFF_VEC
)
2127 #if !(defined(ASM_OUTPUT_ADDR_VEC) || defined(ASM_OUTPUT_ADDR_DIFF_VEC))
2131 if (! JUMP_TABLES_IN_TEXT_SECTION
)
2132 switch_to_section (targetm
.asm_out
.function_rodata_section
2133 (current_function_decl
));
2135 switch_to_section (current_function_section ());
2139 #if defined(ASM_OUTPUT_ADDR_VEC) || defined(ASM_OUTPUT_ADDR_DIFF_VEC)
2140 if (GET_CODE (body
) == ADDR_VEC
)
2142 #ifdef ASM_OUTPUT_ADDR_VEC
2143 ASM_OUTPUT_ADDR_VEC (PREV_INSN (insn
), body
);
2150 #ifdef ASM_OUTPUT_ADDR_DIFF_VEC
2151 ASM_OUTPUT_ADDR_DIFF_VEC (PREV_INSN (insn
), body
);
2157 vlen
= XVECLEN (body
, GET_CODE (body
) == ADDR_DIFF_VEC
);
2158 for (idx
= 0; idx
< vlen
; idx
++)
2160 if (GET_CODE (body
) == ADDR_VEC
)
2162 #ifdef ASM_OUTPUT_ADDR_VEC_ELT
2163 ASM_OUTPUT_ADDR_VEC_ELT
2164 (file
, CODE_LABEL_NUMBER (XEXP (XVECEXP (body
, 0, idx
), 0)));
2171 #ifdef ASM_OUTPUT_ADDR_DIFF_ELT
2172 ASM_OUTPUT_ADDR_DIFF_ELT
2175 CODE_LABEL_NUMBER (XEXP (XVECEXP (body
, 1, idx
), 0)),
2176 CODE_LABEL_NUMBER (XEXP (XEXP (body
, 0), 0)));
2182 #ifdef ASM_OUTPUT_CASE_END
2183 ASM_OUTPUT_CASE_END (file
,
2184 CODE_LABEL_NUMBER (PREV_INSN (insn
)),
2189 switch_to_section (current_function_section ());
2193 /* Output this line note if it is the first or the last line
2195 if (notice_source_line (insn
, &is_stmt
))
2197 (*debug_hooks
->source_line
) (last_linenum
,
2203 if (GET_CODE (body
) == ASM_INPUT
)
2205 const char *string
= XSTR (body
, 0);
2207 /* There's no telling what that did to the condition codes. */
2212 expanded_location loc
;
2215 loc
= expand_location (ASM_INPUT_SOURCE_LOCATION (body
));
2216 if (*loc
.file
&& loc
.line
)
2217 fprintf (asm_out_file
, "%s %i \"%s\" 1\n",
2218 ASM_COMMENT_START
, loc
.line
, loc
.file
);
2219 fprintf (asm_out_file
, "\t%s\n", string
);
2220 #if HAVE_AS_LINE_ZERO
2221 if (*loc
.file
&& loc
.line
)
2222 fprintf (asm_out_file
, "%s 0 \"\" 2\n", ASM_COMMENT_START
);
2228 /* Detect `asm' construct with operands. */
2229 if (asm_noperands (body
) >= 0)
2231 unsigned int noperands
= asm_noperands (body
);
2232 rtx
*ops
= XALLOCAVEC (rtx
, noperands
);
2235 expanded_location expanded
;
2237 /* There's no telling what that did to the condition codes. */
2240 /* Get out the operand values. */
2241 string
= decode_asm_operands (body
, ops
, NULL
, NULL
, NULL
, &loc
);
2242 /* Inhibit dying on what would otherwise be compiler bugs. */
2243 insn_noperands
= noperands
;
2244 this_is_asm_operands
= insn
;
2245 expanded
= expand_location (loc
);
2247 #ifdef FINAL_PRESCAN_INSN
2248 FINAL_PRESCAN_INSN (insn
, ops
, insn_noperands
);
2251 /* Output the insn using them. */
2255 if (expanded
.file
&& expanded
.line
)
2256 fprintf (asm_out_file
, "%s %i \"%s\" 1\n",
2257 ASM_COMMENT_START
, expanded
.line
, expanded
.file
);
2258 output_asm_insn (string
, ops
);
2259 #if HAVE_AS_LINE_ZERO
2260 if (expanded
.file
&& expanded
.line
)
2261 fprintf (asm_out_file
, "%s 0 \"\" 2\n", ASM_COMMENT_START
);
2265 if (targetm
.asm_out
.final_postscan_insn
)
2266 targetm
.asm_out
.final_postscan_insn (file
, insn
, ops
,
2269 this_is_asm_operands
= 0;
2275 if (GET_CODE (body
) == SEQUENCE
)
2277 /* A delayed-branch sequence */
2280 final_sequence
= body
;
2282 /* Record the delay slots' frame information before the branch.
2283 This is needed for delayed calls: see execute_cfa_program(). */
2284 #if defined (DWARF2_UNWIND_INFO)
2285 if (dwarf2out_do_frame ())
2286 for (i
= 1; i
< XVECLEN (body
, 0); i
++)
2287 dwarf2out_frame_debug (XVECEXP (body
, 0, i
), false);
2290 /* The first insn in this SEQUENCE might be a JUMP_INSN that will
2291 force the restoration of a comparison that was previously
2292 thought unnecessary. If that happens, cancel this sequence
2293 and cause that insn to be restored. */
2295 next
= final_scan_insn (XVECEXP (body
, 0, 0), file
, 0, 1, seen
);
2296 if (next
!= XVECEXP (body
, 0, 1))
2302 for (i
= 1; i
< XVECLEN (body
, 0); i
++)
2304 rtx insn
= XVECEXP (body
, 0, i
);
2305 rtx next
= NEXT_INSN (insn
);
2306 /* We loop in case any instruction in a delay slot gets
2309 insn
= final_scan_insn (insn
, file
, 0, 1, seen
);
2310 while (insn
!= next
);
2312 #ifdef DBR_OUTPUT_SEQEND
2313 DBR_OUTPUT_SEQEND (file
);
2317 /* If the insn requiring the delay slot was a CALL_INSN, the
2318 insns in the delay slot are actually executed before the
2319 called function. Hence we don't preserve any CC-setting
2320 actions in these insns and the CC must be marked as being
2321 clobbered by the function. */
2322 if (CALL_P (XVECEXP (body
, 0, 0)))
2329 /* We have a real machine instruction as rtl. */
2331 body
= PATTERN (insn
);
2334 set
= single_set (insn
);
2336 /* Check for redundant test and compare instructions
2337 (when the condition codes are already set up as desired).
2338 This is done only when optimizing; if not optimizing,
2339 it should be possible for the user to alter a variable
2340 with the debugger in between statements
2341 and the next statement should reexamine the variable
2342 to compute the condition codes. */
2347 && GET_CODE (SET_DEST (set
)) == CC0
2348 && insn
!= last_ignored_compare
)
2351 if (GET_CODE (SET_SRC (set
)) == SUBREG
)
2352 SET_SRC (set
) = alter_subreg (&SET_SRC (set
));
2354 src1
= SET_SRC (set
);
2356 if (GET_CODE (SET_SRC (set
)) == COMPARE
)
2358 if (GET_CODE (XEXP (SET_SRC (set
), 0)) == SUBREG
)
2359 XEXP (SET_SRC (set
), 0)
2360 = alter_subreg (&XEXP (SET_SRC (set
), 0));
2361 if (GET_CODE (XEXP (SET_SRC (set
), 1)) == SUBREG
)
2362 XEXP (SET_SRC (set
), 1)
2363 = alter_subreg (&XEXP (SET_SRC (set
), 1));
2364 if (XEXP (SET_SRC (set
), 1)
2365 == CONST0_RTX (GET_MODE (XEXP (SET_SRC (set
), 0))))
2366 src2
= XEXP (SET_SRC (set
), 0);
2368 if ((cc_status
.value1
!= 0
2369 && rtx_equal_p (src1
, cc_status
.value1
))
2370 || (cc_status
.value2
!= 0
2371 && rtx_equal_p (src1
, cc_status
.value2
))
2372 || (src2
!= 0 && cc_status
.value1
!= 0
2373 && rtx_equal_p (src2
, cc_status
.value1
))
2374 || (src2
!= 0 && cc_status
.value2
!= 0
2375 && rtx_equal_p (src2
, cc_status
.value2
)))
2377 /* Don't delete insn if it has an addressing side-effect. */
2378 if (! FIND_REG_INC_NOTE (insn
, NULL_RTX
)
2379 /* or if anything in it is volatile. */
2380 && ! volatile_refs_p (PATTERN (insn
)))
2382 /* We don't really delete the insn; just ignore it. */
2383 last_ignored_compare
= insn
;
2390 /* If this is a conditional branch, maybe modify it
2391 if the cc's are in a nonstandard state
2392 so that it accomplishes the same thing that it would
2393 do straightforwardly if the cc's were set up normally. */
2395 if (cc_status
.flags
!= 0
2397 && GET_CODE (body
) == SET
2398 && SET_DEST (body
) == pc_rtx
2399 && GET_CODE (SET_SRC (body
)) == IF_THEN_ELSE
2400 && COMPARISON_P (XEXP (SET_SRC (body
), 0))
2401 && XEXP (XEXP (SET_SRC (body
), 0), 0) == cc0_rtx
)
2403 /* This function may alter the contents of its argument
2404 and clear some of the cc_status.flags bits.
2405 It may also return 1 meaning condition now always true
2406 or -1 meaning condition now always false
2407 or 2 meaning condition nontrivial but altered. */
2408 int result
= alter_cond (XEXP (SET_SRC (body
), 0));
2409 /* If condition now has fixed value, replace the IF_THEN_ELSE
2410 with its then-operand or its else-operand. */
2412 SET_SRC (body
) = XEXP (SET_SRC (body
), 1);
2414 SET_SRC (body
) = XEXP (SET_SRC (body
), 2);
2416 /* The jump is now either unconditional or a no-op.
2417 If it has become a no-op, don't try to output it.
2418 (It would not be recognized.) */
2419 if (SET_SRC (body
) == pc_rtx
)
2424 else if (GET_CODE (SET_SRC (body
)) == RETURN
)
2425 /* Replace (set (pc) (return)) with (return). */
2426 PATTERN (insn
) = body
= SET_SRC (body
);
2428 /* Rerecognize the instruction if it has changed. */
2430 INSN_CODE (insn
) = -1;
2433 /* If this is a conditional trap, maybe modify it if the cc's
2434 are in a nonstandard state so that it accomplishes the same
2435 thing that it would do straightforwardly if the cc's were
2437 if (cc_status
.flags
!= 0
2438 && NONJUMP_INSN_P (insn
)
2439 && GET_CODE (body
) == TRAP_IF
2440 && COMPARISON_P (TRAP_CONDITION (body
))
2441 && XEXP (TRAP_CONDITION (body
), 0) == cc0_rtx
)
2443 /* This function may alter the contents of its argument
2444 and clear some of the cc_status.flags bits.
2445 It may also return 1 meaning condition now always true
2446 or -1 meaning condition now always false
2447 or 2 meaning condition nontrivial but altered. */
2448 int result
= alter_cond (TRAP_CONDITION (body
));
2450 /* If TRAP_CONDITION has become always false, delete the
2458 /* If TRAP_CONDITION has become always true, replace
2459 TRAP_CONDITION with const_true_rtx. */
2461 TRAP_CONDITION (body
) = const_true_rtx
;
2463 /* Rerecognize the instruction if it has changed. */
2465 INSN_CODE (insn
) = -1;
2468 /* Make same adjustments to instructions that examine the
2469 condition codes without jumping and instructions that
2470 handle conditional moves (if this machine has either one). */
2472 if (cc_status
.flags
!= 0
2475 rtx cond_rtx
, then_rtx
, else_rtx
;
2478 && GET_CODE (SET_SRC (set
)) == IF_THEN_ELSE
)
2480 cond_rtx
= XEXP (SET_SRC (set
), 0);
2481 then_rtx
= XEXP (SET_SRC (set
), 1);
2482 else_rtx
= XEXP (SET_SRC (set
), 2);
2486 cond_rtx
= SET_SRC (set
);
2487 then_rtx
= const_true_rtx
;
2488 else_rtx
= const0_rtx
;
2491 switch (GET_CODE (cond_rtx
))
2505 if (XEXP (cond_rtx
, 0) != cc0_rtx
)
2507 result
= alter_cond (cond_rtx
);
2509 validate_change (insn
, &SET_SRC (set
), then_rtx
, 0);
2510 else if (result
== -1)
2511 validate_change (insn
, &SET_SRC (set
), else_rtx
, 0);
2512 else if (result
== 2)
2513 INSN_CODE (insn
) = -1;
2514 if (SET_DEST (set
) == SET_SRC (set
))
2526 #ifdef HAVE_peephole
2527 /* Do machine-specific peephole optimizations if desired. */
2529 if (optimize
&& !flag_no_peephole
&& !nopeepholes
)
2531 rtx next
= peephole (insn
);
2532 /* When peepholing, if there were notes within the peephole,
2533 emit them before the peephole. */
2534 if (next
!= 0 && next
!= NEXT_INSN (insn
))
2536 rtx note
, prev
= PREV_INSN (insn
);
2538 for (note
= NEXT_INSN (insn
); note
!= next
;
2539 note
= NEXT_INSN (note
))
2540 final_scan_insn (note
, file
, optimize
, nopeepholes
, seen
);
2542 /* Put the notes in the proper position for a later
2543 rescan. For example, the SH target can do this
2544 when generating a far jump in a delayed branch
2546 note
= NEXT_INSN (insn
);
2547 PREV_INSN (note
) = prev
;
2548 NEXT_INSN (prev
) = note
;
2549 NEXT_INSN (PREV_INSN (next
)) = insn
;
2550 PREV_INSN (insn
) = PREV_INSN (next
);
2551 NEXT_INSN (insn
) = next
;
2552 PREV_INSN (next
) = insn
;
2555 /* PEEPHOLE might have changed this. */
2556 body
= PATTERN (insn
);
2560 /* Try to recognize the instruction.
2561 If successful, verify that the operands satisfy the
2562 constraints for the instruction. Crash if they don't,
2563 since `reload' should have changed them so that they do. */
2565 insn_code_number
= recog_memoized (insn
);
2566 cleanup_subreg_operands (insn
);
2568 /* Dump the insn in the assembly for debugging. */
2569 if (flag_dump_rtl_in_asm
)
2571 print_rtx_head
= ASM_COMMENT_START
;
2572 print_rtl_single (asm_out_file
, insn
);
2573 print_rtx_head
= "";
2576 if (! constrain_operands_cached (1))
2577 fatal_insn_not_found (insn
);
2579 /* Some target machines need to prescan each insn before
2582 #ifdef FINAL_PRESCAN_INSN
2583 FINAL_PRESCAN_INSN (insn
, recog_data
.operand
, recog_data
.n_operands
);
2586 #ifdef HAVE_conditional_execution
2587 if (GET_CODE (PATTERN (insn
)) == COND_EXEC
)
2588 current_insn_predicate
= COND_EXEC_TEST (PATTERN (insn
));
2592 cc_prev_status
= cc_status
;
2594 /* Update `cc_status' for this instruction.
2595 The instruction's output routine may change it further.
2596 If the output routine for a jump insn needs to depend
2597 on the cc status, it should look at cc_prev_status. */
2599 NOTICE_UPDATE_CC (body
, insn
);
2602 current_output_insn
= debug_insn
= insn
;
2604 #if defined (DWARF2_UNWIND_INFO)
2605 if (CALL_P (insn
) && dwarf2out_do_frame ())
2606 dwarf2out_frame_debug (insn
, false);
2609 /* Find the proper template for this insn. */
2610 templ
= get_insn_template (insn_code_number
, insn
);
2612 /* If the C code returns 0, it means that it is a jump insn
2613 which follows a deleted test insn, and that test insn
2614 needs to be reinserted. */
2619 gcc_assert (prev_nonnote_insn (insn
) == last_ignored_compare
);
2621 /* We have already processed the notes between the setter and
2622 the user. Make sure we don't process them again, this is
2623 particularly important if one of the notes is a block
2624 scope note or an EH note. */
2626 prev
!= last_ignored_compare
;
2627 prev
= PREV_INSN (prev
))
2630 delete_insn (prev
); /* Use delete_note. */
2636 /* If the template is the string "#", it means that this insn must
2638 if (templ
[0] == '#' && templ
[1] == '\0')
2640 rtx new_rtx
= try_split (body
, insn
, 0);
2642 /* If we didn't split the insn, go away. */
2643 if (new_rtx
== insn
&& PATTERN (new_rtx
) == body
)
2644 fatal_insn ("could not split insn", insn
);
2646 #ifdef HAVE_ATTR_length
2647 /* This instruction should have been split in shorten_branches,
2648 to ensure that we would have valid length info for the
2656 #ifdef TARGET_UNWIND_INFO
2657 /* ??? This will put the directives in the wrong place if
2658 get_insn_template outputs assembly directly. However calling it
2659 before get_insn_template breaks if the insns is split. */
2660 targetm
.asm_out
.unwind_emit (asm_out_file
, insn
);
2665 rtx x
= call_from_call_insn (insn
);
2667 if (x
&& MEM_P (x
) && GET_CODE (XEXP (x
, 0)) == SYMBOL_REF
)
2671 t
= SYMBOL_REF_DECL (x
);
2673 assemble_external (t
);
2677 /* Output assembler code from the template. */
2678 output_asm_insn (templ
, recog_data
.operand
);
2680 /* Some target machines need to postscan each insn after
2682 if (targetm
.asm_out
.final_postscan_insn
)
2683 targetm
.asm_out
.final_postscan_insn (file
, insn
, recog_data
.operand
,
2684 recog_data
.n_operands
);
2686 /* If necessary, report the effect that the instruction has on
2687 the unwind info. We've already done this for delay slots
2688 and call instructions. */
2689 #if defined (DWARF2_UNWIND_INFO)
2690 if (final_sequence
== 0
2691 #if !defined (HAVE_prologue)
2692 && !ACCUMULATE_OUTGOING_ARGS
2694 && dwarf2out_do_frame ())
2695 dwarf2out_frame_debug (insn
, true);
2698 current_output_insn
= debug_insn
= 0;
2701 return NEXT_INSN (insn
);
2704 /* Return whether a source line note needs to be emitted before INSN.
2705 Sets IS_STMT to TRUE if the line should be marked as a possible
2706 breakpoint location. */
2709 notice_source_line (rtx insn
, bool *is_stmt
)
2711 const char *filename
;
2714 if (override_filename
)
2716 filename
= override_filename
;
2717 linenum
= override_linenum
;
2721 filename
= insn_file (insn
);
2722 linenum
= insn_line (insn
);
2725 if (filename
== NULL
)
2728 if (force_source_line
2729 || filename
!= last_filename
2730 || last_linenum
!= linenum
)
2732 force_source_line
= false;
2733 last_filename
= filename
;
2734 last_linenum
= linenum
;
2735 last_discriminator
= discriminator
;
2737 high_block_linenum
= MAX (last_linenum
, high_block_linenum
);
2738 high_function_linenum
= MAX (last_linenum
, high_function_linenum
);
2742 if (SUPPORTS_DISCRIMINATOR
&& last_discriminator
!= discriminator
)
2744 /* If the discriminator changed, but the line number did not,
2745 output the line table entry with is_stmt false so the
2746 debugger does not treat this as a breakpoint location. */
2747 last_discriminator
= discriminator
;
2755 /* For each operand in INSN, simplify (subreg (reg)) so that it refers
2756 directly to the desired hard register. */
2759 cleanup_subreg_operands (rtx insn
)
2762 bool changed
= false;
2763 extract_insn_cached (insn
);
2764 for (i
= 0; i
< recog_data
.n_operands
; i
++)
2766 /* The following test cannot use recog_data.operand when testing
2767 for a SUBREG: the underlying object might have been changed
2768 already if we are inside a match_operator expression that
2769 matches the else clause. Instead we test the underlying
2770 expression directly. */
2771 if (GET_CODE (*recog_data
.operand_loc
[i
]) == SUBREG
)
2773 recog_data
.operand
[i
] = alter_subreg (recog_data
.operand_loc
[i
]);
2776 else if (GET_CODE (recog_data
.operand
[i
]) == PLUS
2777 || GET_CODE (recog_data
.operand
[i
]) == MULT
2778 || MEM_P (recog_data
.operand
[i
]))
2779 recog_data
.operand
[i
] = walk_alter_subreg (recog_data
.operand_loc
[i
], &changed
);
2782 for (i
= 0; i
< recog_data
.n_dups
; i
++)
2784 if (GET_CODE (*recog_data
.dup_loc
[i
]) == SUBREG
)
2786 *recog_data
.dup_loc
[i
] = alter_subreg (recog_data
.dup_loc
[i
]);
2789 else if (GET_CODE (*recog_data
.dup_loc
[i
]) == PLUS
2790 || GET_CODE (*recog_data
.dup_loc
[i
]) == MULT
2791 || MEM_P (*recog_data
.dup_loc
[i
]))
2792 *recog_data
.dup_loc
[i
] = walk_alter_subreg (recog_data
.dup_loc
[i
], &changed
);
2795 df_insn_rescan (insn
);
2798 /* If X is a SUBREG, replace it with a REG or a MEM,
2799 based on the thing it is a subreg of. */
2802 alter_subreg (rtx
*xp
)
2805 rtx y
= SUBREG_REG (x
);
2807 /* simplify_subreg does not remove subreg from volatile references.
2808 We are required to. */
2811 int offset
= SUBREG_BYTE (x
);
2813 /* For paradoxical subregs on big-endian machines, SUBREG_BYTE
2814 contains 0 instead of the proper offset. See simplify_subreg. */
2816 && GET_MODE_SIZE (GET_MODE (y
)) < GET_MODE_SIZE (GET_MODE (x
)))
2818 int difference
= GET_MODE_SIZE (GET_MODE (y
))
2819 - GET_MODE_SIZE (GET_MODE (x
));
2820 if (WORDS_BIG_ENDIAN
)
2821 offset
+= (difference
/ UNITS_PER_WORD
) * UNITS_PER_WORD
;
2822 if (BYTES_BIG_ENDIAN
)
2823 offset
+= difference
% UNITS_PER_WORD
;
2826 *xp
= adjust_address (y
, GET_MODE (x
), offset
);
2830 rtx new_rtx
= simplify_subreg (GET_MODE (x
), y
, GET_MODE (y
),
2837 /* Simplify_subreg can't handle some REG cases, but we have to. */
2839 HOST_WIDE_INT offset
;
2841 regno
= subreg_regno (x
);
2842 if (subreg_lowpart_p (x
))
2843 offset
= byte_lowpart_offset (GET_MODE (x
), GET_MODE (y
));
2845 offset
= SUBREG_BYTE (x
);
2846 *xp
= gen_rtx_REG_offset (y
, GET_MODE (x
), regno
, offset
);
2853 /* Do alter_subreg on all the SUBREGs contained in X. */
2856 walk_alter_subreg (rtx
*xp
, bool *changed
)
2859 switch (GET_CODE (x
))
2864 XEXP (x
, 0) = walk_alter_subreg (&XEXP (x
, 0), changed
);
2865 XEXP (x
, 1) = walk_alter_subreg (&XEXP (x
, 1), changed
);
2870 XEXP (x
, 0) = walk_alter_subreg (&XEXP (x
, 0), changed
);
2875 return alter_subreg (xp
);
2886 /* Given BODY, the body of a jump instruction, alter the jump condition
2887 as required by the bits that are set in cc_status.flags.
2888 Not all of the bits there can be handled at this level in all cases.
2890 The value is normally 0.
2891 1 means that the condition has become always true.
2892 -1 means that the condition has become always false.
2893 2 means that COND has been altered. */
2896 alter_cond (rtx cond
)
2900 if (cc_status
.flags
& CC_REVERSED
)
2903 PUT_CODE (cond
, swap_condition (GET_CODE (cond
)));
2906 if (cc_status
.flags
& CC_INVERTED
)
2909 PUT_CODE (cond
, reverse_condition (GET_CODE (cond
)));
2912 if (cc_status
.flags
& CC_NOT_POSITIVE
)
2913 switch (GET_CODE (cond
))
2918 /* Jump becomes unconditional. */
2924 /* Jump becomes no-op. */
2928 PUT_CODE (cond
, EQ
);
2933 PUT_CODE (cond
, NE
);
2941 if (cc_status
.flags
& CC_NOT_NEGATIVE
)
2942 switch (GET_CODE (cond
))
2946 /* Jump becomes unconditional. */
2951 /* Jump becomes no-op. */
2956 PUT_CODE (cond
, EQ
);
2962 PUT_CODE (cond
, NE
);
2970 if (cc_status
.flags
& CC_NO_OVERFLOW
)
2971 switch (GET_CODE (cond
))
2974 /* Jump becomes unconditional. */
2978 PUT_CODE (cond
, EQ
);
2983 PUT_CODE (cond
, NE
);
2988 /* Jump becomes no-op. */
2995 if (cc_status
.flags
& (CC_Z_IN_NOT_N
| CC_Z_IN_N
))
2996 switch (GET_CODE (cond
))
3002 PUT_CODE (cond
, cc_status
.flags
& CC_Z_IN_N
? GE
: LT
);
3007 PUT_CODE (cond
, cc_status
.flags
& CC_Z_IN_N
? LT
: GE
);
3012 if (cc_status
.flags
& CC_NOT_SIGNED
)
3013 /* The flags are valid if signed condition operators are converted
3015 switch (GET_CODE (cond
))
3018 PUT_CODE (cond
, LEU
);
3023 PUT_CODE (cond
, LTU
);
3028 PUT_CODE (cond
, GTU
);
3033 PUT_CODE (cond
, GEU
);
3045 /* Report inconsistency between the assembler template and the operands.
3046 In an `asm', it's the user's fault; otherwise, the compiler's fault. */
3049 output_operand_lossage (const char *cmsgid
, ...)
3053 const char *pfx_str
;
3056 va_start (ap
, cmsgid
);
3058 pfx_str
= this_is_asm_operands
? _("invalid 'asm': ") : "output_operand: ";
3059 asprintf (&fmt_string
, "%s%s", pfx_str
, _(cmsgid
));
3060 vasprintf (&new_message
, fmt_string
, ap
);
3062 if (this_is_asm_operands
)
3063 error_for_asm (this_is_asm_operands
, "%s", new_message
);
3065 internal_error ("%s", new_message
);
3072 /* Output of assembler code from a template, and its subroutines. */
3074 /* Annotate the assembly with a comment describing the pattern and
3075 alternative used. */
3078 output_asm_name (void)
3082 int num
= INSN_CODE (debug_insn
);
3083 fprintf (asm_out_file
, "\t%s %d\t%s",
3084 ASM_COMMENT_START
, INSN_UID (debug_insn
),
3085 insn_data
[num
].name
);
3086 if (insn_data
[num
].n_alternatives
> 1)
3087 fprintf (asm_out_file
, "/%d", which_alternative
+ 1);
3088 #ifdef HAVE_ATTR_length
3089 fprintf (asm_out_file
, "\t[length = %d]",
3090 get_attr_length (debug_insn
));
3092 /* Clear this so only the first assembler insn
3093 of any rtl insn will get the special comment for -dp. */
3098 /* If OP is a REG or MEM and we can find a MEM_EXPR corresponding to it
3099 or its address, return that expr . Set *PADDRESSP to 1 if the expr
3100 corresponds to the address of the object and 0 if to the object. */
3103 get_mem_expr_from_op (rtx op
, int *paddressp
)
3111 return REG_EXPR (op
);
3112 else if (!MEM_P (op
))
3115 if (MEM_EXPR (op
) != 0)
3116 return MEM_EXPR (op
);
3118 /* Otherwise we have an address, so indicate it and look at the address. */
3122 /* First check if we have a decl for the address, then look at the right side
3123 if it is a PLUS. Otherwise, strip off arithmetic and keep looking.
3124 But don't allow the address to itself be indirect. */
3125 if ((expr
= get_mem_expr_from_op (op
, &inner_addressp
)) && ! inner_addressp
)
3127 else if (GET_CODE (op
) == PLUS
3128 && (expr
= get_mem_expr_from_op (XEXP (op
, 1), &inner_addressp
)))
3132 || GET_RTX_CLASS (GET_CODE (op
)) == RTX_BIN_ARITH
)
3135 expr
= get_mem_expr_from_op (op
, &inner_addressp
);
3136 return inner_addressp
? 0 : expr
;
3139 /* Output operand names for assembler instructions. OPERANDS is the
3140 operand vector, OPORDER is the order to write the operands, and NOPS
3141 is the number of operands to write. */
3144 output_asm_operand_names (rtx
*operands
, int *oporder
, int nops
)
3149 for (i
= 0; i
< nops
; i
++)
3152 rtx op
= operands
[oporder
[i
]];
3153 tree expr
= get_mem_expr_from_op (op
, &addressp
);
3155 fprintf (asm_out_file
, "%c%s",
3156 wrote
? ',' : '\t', wrote
? "" : ASM_COMMENT_START
);
3160 fprintf (asm_out_file
, "%s",
3161 addressp
? "*" : "");
3162 print_mem_expr (asm_out_file
, expr
);
3165 else if (REG_P (op
) && ORIGINAL_REGNO (op
)
3166 && ORIGINAL_REGNO (op
) != REGNO (op
))
3167 fprintf (asm_out_file
, " tmp%i", ORIGINAL_REGNO (op
));
3171 /* Output text from TEMPLATE to the assembler output file,
3172 obeying %-directions to substitute operands taken from
3173 the vector OPERANDS.
3175 %N (for N a digit) means print operand N in usual manner.
3176 %lN means require operand N to be a CODE_LABEL or LABEL_REF
3177 and print the label name with no punctuation.
3178 %cN means require operand N to be a constant
3179 and print the constant expression with no punctuation.
3180 %aN means expect operand N to be a memory address
3181 (not a memory reference!) and print a reference
3183 %nN means expect operand N to be a constant
3184 and print a constant expression for minus the value
3185 of the operand, with no other punctuation. */
3188 output_asm_insn (const char *templ
, rtx
*operands
)
3192 #ifdef ASSEMBLER_DIALECT
3195 int oporder
[MAX_RECOG_OPERANDS
];
3196 char opoutput
[MAX_RECOG_OPERANDS
];
3199 /* An insn may return a null string template
3200 in a case where no assembler code is needed. */
3204 memset (opoutput
, 0, sizeof opoutput
);
3206 putc ('\t', asm_out_file
);
3208 #ifdef ASM_OUTPUT_OPCODE
3209 ASM_OUTPUT_OPCODE (asm_out_file
, p
);
3216 if (flag_verbose_asm
)
3217 output_asm_operand_names (operands
, oporder
, ops
);
3218 if (flag_print_asm_name
)
3222 memset (opoutput
, 0, sizeof opoutput
);
3224 putc (c
, asm_out_file
);
3225 #ifdef ASM_OUTPUT_OPCODE
3226 while ((c
= *p
) == '\t')
3228 putc (c
, asm_out_file
);
3231 ASM_OUTPUT_OPCODE (asm_out_file
, p
);
3235 #ifdef ASSEMBLER_DIALECT
3241 output_operand_lossage ("nested assembly dialect alternatives");
3245 /* If we want the first dialect, do nothing. Otherwise, skip
3246 DIALECT_NUMBER of strings ending with '|'. */
3247 for (i
= 0; i
< dialect_number
; i
++)
3249 while (*p
&& *p
!= '}' && *p
++ != '|')
3258 output_operand_lossage ("unterminated assembly dialect alternative");
3265 /* Skip to close brace. */
3270 output_operand_lossage ("unterminated assembly dialect alternative");
3274 while (*p
++ != '}');
3278 putc (c
, asm_out_file
);
3283 putc (c
, asm_out_file
);
3289 /* %% outputs a single %. */
3293 putc (c
, asm_out_file
);
3295 /* %= outputs a number which is unique to each insn in the entire
3296 compilation. This is useful for making local labels that are
3297 referred to more than once in a given insn. */
3301 fprintf (asm_out_file
, "%d", insn_counter
);
3303 /* % followed by a letter and some digits
3304 outputs an operand in a special way depending on the letter.
3305 Letters `acln' are implemented directly.
3306 Other letters are passed to `output_operand' so that
3307 the PRINT_OPERAND macro can define them. */
3308 else if (ISALPHA (*p
))
3311 unsigned long opnum
;
3314 opnum
= strtoul (p
, &endptr
, 10);
3317 output_operand_lossage ("operand number missing "
3319 else if (this_is_asm_operands
&& opnum
>= insn_noperands
)
3320 output_operand_lossage ("operand number out of range");
3321 else if (letter
== 'l')
3322 output_asm_label (operands
[opnum
]);
3323 else if (letter
== 'a')
3324 output_address (operands
[opnum
]);
3325 else if (letter
== 'c')
3327 if (CONSTANT_ADDRESS_P (operands
[opnum
]))
3328 output_addr_const (asm_out_file
, operands
[opnum
]);
3330 output_operand (operands
[opnum
], 'c');
3332 else if (letter
== 'n')
3334 if (CONST_INT_P (operands
[opnum
]))
3335 fprintf (asm_out_file
, HOST_WIDE_INT_PRINT_DEC
,
3336 - INTVAL (operands
[opnum
]));
3339 putc ('-', asm_out_file
);
3340 output_addr_const (asm_out_file
, operands
[opnum
]);
3344 output_operand (operands
[opnum
], letter
);
3346 if (!opoutput
[opnum
])
3347 oporder
[ops
++] = opnum
;
3348 opoutput
[opnum
] = 1;
3353 /* % followed by a digit outputs an operand the default way. */
3354 else if (ISDIGIT (*p
))
3356 unsigned long opnum
;
3359 opnum
= strtoul (p
, &endptr
, 10);
3360 if (this_is_asm_operands
&& opnum
>= insn_noperands
)
3361 output_operand_lossage ("operand number out of range");
3363 output_operand (operands
[opnum
], 0);
3365 if (!opoutput
[opnum
])
3366 oporder
[ops
++] = opnum
;
3367 opoutput
[opnum
] = 1;
3372 /* % followed by punctuation: output something for that
3373 punctuation character alone, with no operand.
3374 The PRINT_OPERAND macro decides what is actually done. */
3375 #ifdef PRINT_OPERAND_PUNCT_VALID_P
3376 else if (PRINT_OPERAND_PUNCT_VALID_P ((unsigned char) *p
))
3377 output_operand (NULL_RTX
, *p
++);
3380 output_operand_lossage ("invalid %%-code");
3384 putc (c
, asm_out_file
);
3387 /* Write out the variable names for operands, if we know them. */
3388 if (flag_verbose_asm
)
3389 output_asm_operand_names (operands
, oporder
, ops
);
3390 if (flag_print_asm_name
)
3393 putc ('\n', asm_out_file
);
3396 /* Output a LABEL_REF, or a bare CODE_LABEL, as an assembler symbol. */
3399 output_asm_label (rtx x
)
3403 if (GET_CODE (x
) == LABEL_REF
)
3407 && NOTE_KIND (x
) == NOTE_INSN_DELETED_LABEL
))
3408 ASM_GENERATE_INTERNAL_LABEL (buf
, "L", CODE_LABEL_NUMBER (x
));
3410 output_operand_lossage ("'%%l' operand isn't a label");
3412 assemble_name (asm_out_file
, buf
);
3415 /* Helper rtx-iteration-function for mark_symbol_refs_as_used and
3416 output_operand. Marks SYMBOL_REFs as referenced through use of
3417 assemble_external. */
3420 mark_symbol_ref_as_used (rtx
*xp
, void *dummy ATTRIBUTE_UNUSED
)
3424 /* If we have a used symbol, we may have to emit assembly
3425 annotations corresponding to whether the symbol is external, weak
3426 or has non-default visibility. */
3427 if (GET_CODE (x
) == SYMBOL_REF
)
3431 t
= SYMBOL_REF_DECL (x
);
3433 assemble_external (t
);
3441 /* Marks SYMBOL_REFs in x as referenced through use of assemble_external. */
3444 mark_symbol_refs_as_used (rtx x
)
3446 for_each_rtx (&x
, mark_symbol_ref_as_used
, NULL
);
3449 /* Print operand X using machine-dependent assembler syntax.
3450 The macro PRINT_OPERAND is defined just to control this function.
3451 CODE is a non-digit that preceded the operand-number in the % spec,
3452 such as 'z' if the spec was `%z3'. CODE is 0 if there was no char
3453 between the % and the digits.
3454 When CODE is a non-letter, X is 0.
3456 The meanings of the letters are machine-dependent and controlled
3457 by PRINT_OPERAND. */
3460 output_operand (rtx x
, int code ATTRIBUTE_UNUSED
)
3462 if (x
&& GET_CODE (x
) == SUBREG
)
3463 x
= alter_subreg (&x
);
3465 /* X must not be a pseudo reg. */
3466 gcc_assert (!x
|| !REG_P (x
) || REGNO (x
) < FIRST_PSEUDO_REGISTER
);
3468 PRINT_OPERAND (asm_out_file
, x
, code
);
3473 for_each_rtx (&x
, mark_symbol_ref_as_used
, NULL
);
3476 /* Print a memory reference operand for address X
3477 using machine-dependent assembler syntax.
3478 The macro PRINT_OPERAND_ADDRESS exists just to control this function. */
3481 output_address (rtx x
)
3483 bool changed
= false;
3484 walk_alter_subreg (&x
, &changed
);
3485 PRINT_OPERAND_ADDRESS (asm_out_file
, x
);
3488 /* Print an integer constant expression in assembler syntax.
3489 Addition and subtraction are the only arithmetic
3490 that may appear in these expressions. */
3493 output_addr_const (FILE *file
, rtx x
)
3498 switch (GET_CODE (x
))
3505 if (SYMBOL_REF_DECL (x
))
3507 mark_decl_referenced (SYMBOL_REF_DECL (x
));
3508 assemble_external (SYMBOL_REF_DECL (x
));
3510 #ifdef ASM_OUTPUT_SYMBOL_REF
3511 ASM_OUTPUT_SYMBOL_REF (file
, x
);
3513 assemble_name (file
, XSTR (x
, 0));
3521 ASM_GENERATE_INTERNAL_LABEL (buf
, "L", CODE_LABEL_NUMBER (x
));
3522 #ifdef ASM_OUTPUT_LABEL_REF
3523 ASM_OUTPUT_LABEL_REF (file
, buf
);
3525 assemble_name (file
, buf
);
3530 fprintf (file
, HOST_WIDE_INT_PRINT_DEC
, INTVAL (x
));
3534 /* This used to output parentheses around the expression,
3535 but that does not work on the 386 (either ATT or BSD assembler). */
3536 output_addr_const (file
, XEXP (x
, 0));
3540 if (GET_MODE (x
) == VOIDmode
)
3542 /* We can use %d if the number is one word and positive. */
3543 if (CONST_DOUBLE_HIGH (x
))
3544 fprintf (file
, HOST_WIDE_INT_PRINT_DOUBLE_HEX
,
3545 (unsigned HOST_WIDE_INT
) CONST_DOUBLE_HIGH (x
),
3546 (unsigned HOST_WIDE_INT
) CONST_DOUBLE_LOW (x
));
3547 else if (CONST_DOUBLE_LOW (x
) < 0)
3548 fprintf (file
, HOST_WIDE_INT_PRINT_HEX
,
3549 (unsigned HOST_WIDE_INT
) CONST_DOUBLE_LOW (x
));
3551 fprintf (file
, HOST_WIDE_INT_PRINT_DEC
, CONST_DOUBLE_LOW (x
));
3554 /* We can't handle floating point constants;
3555 PRINT_OPERAND must handle them. */
3556 output_operand_lossage ("floating constant misused");
3560 fprintf (file
, HOST_WIDE_INT_PRINT_HEX
,
3561 (unsigned HOST_WIDE_INT
) CONST_FIXED_VALUE_LOW (x
));
3565 /* Some assemblers need integer constants to appear last (eg masm). */
3566 if (CONST_INT_P (XEXP (x
, 0)))
3568 output_addr_const (file
, XEXP (x
, 1));
3569 if (INTVAL (XEXP (x
, 0)) >= 0)
3570 fprintf (file
, "+");
3571 output_addr_const (file
, XEXP (x
, 0));
3575 output_addr_const (file
, XEXP (x
, 0));
3576 if (!CONST_INT_P (XEXP (x
, 1))
3577 || INTVAL (XEXP (x
, 1)) >= 0)
3578 fprintf (file
, "+");
3579 output_addr_const (file
, XEXP (x
, 1));
3584 /* Avoid outputting things like x-x or x+5-x,
3585 since some assemblers can't handle that. */
3586 x
= simplify_subtraction (x
);
3587 if (GET_CODE (x
) != MINUS
)
3590 output_addr_const (file
, XEXP (x
, 0));
3591 fprintf (file
, "-");
3592 if ((CONST_INT_P (XEXP (x
, 1)) && INTVAL (XEXP (x
, 1)) >= 0)
3593 || GET_CODE (XEXP (x
, 1)) == PC
3594 || GET_CODE (XEXP (x
, 1)) == SYMBOL_REF
)
3595 output_addr_const (file
, XEXP (x
, 1));
3598 fputs (targetm
.asm_out
.open_paren
, file
);
3599 output_addr_const (file
, XEXP (x
, 1));
3600 fputs (targetm
.asm_out
.close_paren
, file
);
3608 output_addr_const (file
, XEXP (x
, 0));
3612 #ifdef OUTPUT_ADDR_CONST_EXTRA
3613 OUTPUT_ADDR_CONST_EXTRA (file
, x
, fail
);
3618 output_operand_lossage ("invalid expression as operand");
3622 /* A poor man's fprintf, with the added features of %I, %R, %L, and %U.
3623 %R prints the value of REGISTER_PREFIX.
3624 %L prints the value of LOCAL_LABEL_PREFIX.
3625 %U prints the value of USER_LABEL_PREFIX.
3626 %I prints the value of IMMEDIATE_PREFIX.
3627 %O runs ASM_OUTPUT_OPCODE to transform what follows in the string.
3628 Also supported are %d, %i, %u, %x, %X, %o, %c, %s and %%.
3630 We handle alternate assembler dialects here, just like output_asm_insn. */
3633 asm_fprintf (FILE *file
, const char *p
, ...)
3639 va_start (argptr
, p
);
3646 #ifdef ASSEMBLER_DIALECT
3651 /* If we want the first dialect, do nothing. Otherwise, skip
3652 DIALECT_NUMBER of strings ending with '|'. */
3653 for (i
= 0; i
< dialect_number
; i
++)
3655 while (*p
&& *p
++ != '|')
3665 /* Skip to close brace. */
3666 while (*p
&& *p
++ != '}')
3677 while (strchr ("-+ #0", c
))
3682 while (ISDIGIT (c
) || c
== '.')
3693 case 'd': case 'i': case 'u':
3694 case 'x': case 'X': case 'o':
3698 fprintf (file
, buf
, va_arg (argptr
, int));
3702 /* This is a prefix to the 'd', 'i', 'u', 'x', 'X', and
3703 'o' cases, but we do not check for those cases. It
3704 means that the value is a HOST_WIDE_INT, which may be
3705 either `long' or `long long'. */
3706 memcpy (q
, HOST_WIDE_INT_PRINT
, strlen (HOST_WIDE_INT_PRINT
));
3707 q
+= strlen (HOST_WIDE_INT_PRINT
);
3710 fprintf (file
, buf
, va_arg (argptr
, HOST_WIDE_INT
));
3715 #ifdef HAVE_LONG_LONG
3721 fprintf (file
, buf
, va_arg (argptr
, long long));
3728 fprintf (file
, buf
, va_arg (argptr
, long));
3736 fprintf (file
, buf
, va_arg (argptr
, char *));
3740 #ifdef ASM_OUTPUT_OPCODE
3741 ASM_OUTPUT_OPCODE (asm_out_file
, p
);
3746 #ifdef REGISTER_PREFIX
3747 fprintf (file
, "%s", REGISTER_PREFIX
);
3752 #ifdef IMMEDIATE_PREFIX
3753 fprintf (file
, "%s", IMMEDIATE_PREFIX
);
3758 #ifdef LOCAL_LABEL_PREFIX
3759 fprintf (file
, "%s", LOCAL_LABEL_PREFIX
);
3764 fputs (user_label_prefix
, file
);
3767 #ifdef ASM_FPRINTF_EXTENSIONS
3768 /* Uppercase letters are reserved for general use by asm_fprintf
3769 and so are not available to target specific code. In order to
3770 prevent the ASM_FPRINTF_EXTENSIONS macro from using them then,
3771 they are defined here. As they get turned into real extensions
3772 to asm_fprintf they should be removed from this list. */
3773 case 'A': case 'B': case 'C': case 'D': case 'E':
3774 case 'F': case 'G': case 'H': case 'J': case 'K':
3775 case 'M': case 'N': case 'P': case 'Q': case 'S':
3776 case 'T': case 'V': case 'W': case 'Y': case 'Z':
3779 ASM_FPRINTF_EXTENSIONS (file
, argptr
, p
)
3792 /* Split up a CONST_DOUBLE or integer constant rtx
3793 into two rtx's for single words,
3794 storing in *FIRST the word that comes first in memory in the target
3795 and in *SECOND the other. */
3798 split_double (rtx value
, rtx
*first
, rtx
*second
)
3800 if (CONST_INT_P (value
))
3802 if (HOST_BITS_PER_WIDE_INT
>= (2 * BITS_PER_WORD
))
3804 /* In this case the CONST_INT holds both target words.
3805 Extract the bits from it into two word-sized pieces.
3806 Sign extend each half to HOST_WIDE_INT. */
3807 unsigned HOST_WIDE_INT low
, high
;
3808 unsigned HOST_WIDE_INT mask
, sign_bit
, sign_extend
;
3810 /* Set sign_bit to the most significant bit of a word. */
3812 sign_bit
<<= BITS_PER_WORD
- 1;
3814 /* Set mask so that all bits of the word are set. We could
3815 have used 1 << BITS_PER_WORD instead of basing the
3816 calculation on sign_bit. However, on machines where
3817 HOST_BITS_PER_WIDE_INT == BITS_PER_WORD, it could cause a
3818 compiler warning, even though the code would never be
3820 mask
= sign_bit
<< 1;
3823 /* Set sign_extend as any remaining bits. */
3824 sign_extend
= ~mask
;
3826 /* Pick the lower word and sign-extend it. */
3827 low
= INTVAL (value
);
3832 /* Pick the higher word, shifted to the least significant
3833 bits, and sign-extend it. */
3834 high
= INTVAL (value
);
3835 high
>>= BITS_PER_WORD
- 1;
3838 if (high
& sign_bit
)
3839 high
|= sign_extend
;
3841 /* Store the words in the target machine order. */
3842 if (WORDS_BIG_ENDIAN
)
3844 *first
= GEN_INT (high
);
3845 *second
= GEN_INT (low
);
3849 *first
= GEN_INT (low
);
3850 *second
= GEN_INT (high
);
3855 /* The rule for using CONST_INT for a wider mode
3856 is that we regard the value as signed.
3857 So sign-extend it. */
3858 rtx high
= (INTVAL (value
) < 0 ? constm1_rtx
: const0_rtx
);
3859 if (WORDS_BIG_ENDIAN
)
3871 else if (GET_CODE (value
) != CONST_DOUBLE
)
3873 if (WORDS_BIG_ENDIAN
)
3875 *first
= const0_rtx
;
3881 *second
= const0_rtx
;
3884 else if (GET_MODE (value
) == VOIDmode
3885 /* This is the old way we did CONST_DOUBLE integers. */
3886 || GET_MODE_CLASS (GET_MODE (value
)) == MODE_INT
)
3888 /* In an integer, the words are defined as most and least significant.
3889 So order them by the target's convention. */
3890 if (WORDS_BIG_ENDIAN
)
3892 *first
= GEN_INT (CONST_DOUBLE_HIGH (value
));
3893 *second
= GEN_INT (CONST_DOUBLE_LOW (value
));
3897 *first
= GEN_INT (CONST_DOUBLE_LOW (value
));
3898 *second
= GEN_INT (CONST_DOUBLE_HIGH (value
));
3905 REAL_VALUE_FROM_CONST_DOUBLE (r
, value
);
3907 /* Note, this converts the REAL_VALUE_TYPE to the target's
3908 format, splits up the floating point double and outputs
3909 exactly 32 bits of it into each of l[0] and l[1] --
3910 not necessarily BITS_PER_WORD bits. */
3911 REAL_VALUE_TO_TARGET_DOUBLE (r
, l
);
3913 /* If 32 bits is an entire word for the target, but not for the host,
3914 then sign-extend on the host so that the number will look the same
3915 way on the host that it would on the target. See for instance
3916 simplify_unary_operation. The #if is needed to avoid compiler
3919 #if HOST_BITS_PER_LONG > 32
3920 if (BITS_PER_WORD
< HOST_BITS_PER_LONG
&& BITS_PER_WORD
== 32)
3922 if (l
[0] & ((long) 1 << 31))
3923 l
[0] |= ((long) (-1) << 32);
3924 if (l
[1] & ((long) 1 << 31))
3925 l
[1] |= ((long) (-1) << 32);
3929 *first
= GEN_INT (l
[0]);
3930 *second
= GEN_INT (l
[1]);
3934 /* Return nonzero if this function has no function calls. */
3937 leaf_function_p (void)
3942 if (crtl
->profile
|| profile_arc_flag
)
3945 for (insn
= get_insns (); insn
; insn
= NEXT_INSN (insn
))
3948 && ! SIBLING_CALL_P (insn
))
3950 if (NONJUMP_INSN_P (insn
)
3951 && GET_CODE (PATTERN (insn
)) == SEQUENCE
3952 && CALL_P (XVECEXP (PATTERN (insn
), 0, 0))
3953 && ! SIBLING_CALL_P (XVECEXP (PATTERN (insn
), 0, 0)))
3956 for (link
= crtl
->epilogue_delay_list
;
3958 link
= XEXP (link
, 1))
3960 insn
= XEXP (link
, 0);
3963 && ! SIBLING_CALL_P (insn
))
3965 if (NONJUMP_INSN_P (insn
)
3966 && GET_CODE (PATTERN (insn
)) == SEQUENCE
3967 && CALL_P (XVECEXP (PATTERN (insn
), 0, 0))
3968 && ! SIBLING_CALL_P (XVECEXP (PATTERN (insn
), 0, 0)))
3975 /* Return 1 if branch is a forward branch.
3976 Uses insn_shuid array, so it works only in the final pass. May be used by
3977 output templates to customary add branch prediction hints.
3980 final_forward_branch_p (rtx insn
)
3982 int insn_id
, label_id
;
3984 gcc_assert (uid_shuid
);
3985 insn_id
= INSN_SHUID (insn
);
3986 label_id
= INSN_SHUID (JUMP_LABEL (insn
));
3987 /* We've hit some insns that does not have id information available. */
3988 gcc_assert (insn_id
&& label_id
);
3989 return insn_id
< label_id
;
3992 /* On some machines, a function with no call insns
3993 can run faster if it doesn't create its own register window.
3994 When output, the leaf function should use only the "output"
3995 registers. Ordinarily, the function would be compiled to use
3996 the "input" registers to find its arguments; it is a candidate
3997 for leaf treatment if it uses only the "input" registers.
3998 Leaf function treatment means renumbering so the function
3999 uses the "output" registers instead. */
4001 #ifdef LEAF_REGISTERS
4003 /* Return 1 if this function uses only the registers that can be
4004 safely renumbered. */
4007 only_leaf_regs_used (void)
4010 const char *const permitted_reg_in_leaf_functions
= LEAF_REGISTERS
;
4012 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
4013 if ((df_regs_ever_live_p (i
) || global_regs
[i
])
4014 && ! permitted_reg_in_leaf_functions
[i
])
4017 if (crtl
->uses_pic_offset_table
4018 && pic_offset_table_rtx
!= 0
4019 && REG_P (pic_offset_table_rtx
)
4020 && ! permitted_reg_in_leaf_functions
[REGNO (pic_offset_table_rtx
)])
4026 /* Scan all instructions and renumber all registers into those
4027 available in leaf functions. */
4030 leaf_renumber_regs (rtx first
)
4034 /* Renumber only the actual patterns.
4035 The reg-notes can contain frame pointer refs,
4036 and renumbering them could crash, and should not be needed. */
4037 for (insn
= first
; insn
; insn
= NEXT_INSN (insn
))
4039 leaf_renumber_regs_insn (PATTERN (insn
));
4040 for (insn
= crtl
->epilogue_delay_list
;
4042 insn
= XEXP (insn
, 1))
4043 if (INSN_P (XEXP (insn
, 0)))
4044 leaf_renumber_regs_insn (PATTERN (XEXP (insn
, 0)));
4047 /* Scan IN_RTX and its subexpressions, and renumber all regs into those
4048 available in leaf functions. */
4051 leaf_renumber_regs_insn (rtx in_rtx
)
4054 const char *format_ptr
;
4059 /* Renumber all input-registers into output-registers.
4060 renumbered_regs would be 1 for an output-register;
4067 /* Don't renumber the same reg twice. */
4071 newreg
= REGNO (in_rtx
);
4072 /* Don't try to renumber pseudo regs. It is possible for a pseudo reg
4073 to reach here as part of a REG_NOTE. */
4074 if (newreg
>= FIRST_PSEUDO_REGISTER
)
4079 newreg
= LEAF_REG_REMAP (newreg
);
4080 gcc_assert (newreg
>= 0);
4081 df_set_regs_ever_live (REGNO (in_rtx
), false);
4082 df_set_regs_ever_live (newreg
, true);
4083 SET_REGNO (in_rtx
, newreg
);
4087 if (INSN_P (in_rtx
))
4089 /* Inside a SEQUENCE, we find insns.
4090 Renumber just the patterns of these insns,
4091 just as we do for the top-level insns. */
4092 leaf_renumber_regs_insn (PATTERN (in_rtx
));
4096 format_ptr
= GET_RTX_FORMAT (GET_CODE (in_rtx
));
4098 for (i
= 0; i
< GET_RTX_LENGTH (GET_CODE (in_rtx
)); i
++)
4099 switch (*format_ptr
++)
4102 leaf_renumber_regs_insn (XEXP (in_rtx
, i
));
4106 if (NULL
!= XVEC (in_rtx
, i
))
4108 for (j
= 0; j
< XVECLEN (in_rtx
, i
); j
++)
4109 leaf_renumber_regs_insn (XVECEXP (in_rtx
, i
, j
));
4129 /* When -gused is used, emit debug info for only used symbols. But in
4130 addition to the standard intercepted debug_hooks there are some direct
4131 calls into this file, i.e., dbxout_symbol, dbxout_parms, and dbxout_reg_params.
4132 Those routines may also be called from a higher level intercepted routine. So
4133 to prevent recording data for an inner call to one of these for an intercept,
4134 we maintain an intercept nesting counter (debug_nesting). We only save the
4135 intercepted arguments if the nesting is 1. */
4136 int debug_nesting
= 0;
4138 static tree
*symbol_queue
;
4139 int symbol_queue_index
= 0;
4140 static int symbol_queue_size
= 0;
4142 /* Generate the symbols for any queued up type symbols we encountered
4143 while generating the type info for some originally used symbol.
4144 This might generate additional entries in the queue. Only when
4145 the nesting depth goes to 0 is this routine called. */
4148 debug_flush_symbol_queue (void)
4152 /* Make sure that additionally queued items are not flushed
4157 for (i
= 0; i
< symbol_queue_index
; ++i
)
4159 /* If we pushed queued symbols then such symbols must be
4160 output no matter what anyone else says. Specifically,
4161 we need to make sure dbxout_symbol() thinks the symbol was
4162 used and also we need to override TYPE_DECL_SUPPRESS_DEBUG
4163 which may be set for outside reasons. */
4164 int saved_tree_used
= TREE_USED (symbol_queue
[i
]);
4165 int saved_suppress_debug
= TYPE_DECL_SUPPRESS_DEBUG (symbol_queue
[i
]);
4166 TREE_USED (symbol_queue
[i
]) = 1;
4167 TYPE_DECL_SUPPRESS_DEBUG (symbol_queue
[i
]) = 0;
4169 #ifdef DBX_DEBUGGING_INFO
4170 dbxout_symbol (symbol_queue
[i
], 0);
4173 TREE_USED (symbol_queue
[i
]) = saved_tree_used
;
4174 TYPE_DECL_SUPPRESS_DEBUG (symbol_queue
[i
]) = saved_suppress_debug
;
4177 symbol_queue_index
= 0;
4181 /* Queue a type symbol needed as part of the definition of a decl
4182 symbol. These symbols are generated when debug_flush_symbol_queue()
4186 debug_queue_symbol (tree decl
)
4188 if (symbol_queue_index
>= symbol_queue_size
)
4190 symbol_queue_size
+= 10;
4191 symbol_queue
= XRESIZEVEC (tree
, symbol_queue
, symbol_queue_size
);
4194 symbol_queue
[symbol_queue_index
++] = decl
;
4197 /* Free symbol queue. */
4199 debug_free_queue (void)
4203 free (symbol_queue
);
4204 symbol_queue
= NULL
;
4205 symbol_queue_size
= 0;
4209 /* Turn the RTL into assembly. */
4211 rest_of_handle_final (void)
4216 /* Get the function's name, as described by its RTL. This may be
4217 different from the DECL_NAME name used in the source file. */
4219 x
= DECL_RTL (current_function_decl
);
4220 gcc_assert (MEM_P (x
));
4222 gcc_assert (GET_CODE (x
) == SYMBOL_REF
);
4223 fnname
= XSTR (x
, 0);
4225 assemble_start_function (current_function_decl
, fnname
);
4226 final_start_function (get_insns (), asm_out_file
, optimize
);
4227 final (get_insns (), asm_out_file
, optimize
);
4228 final_end_function ();
4230 #ifdef TARGET_UNWIND_INFO
4231 /* ??? The IA-64 ".handlerdata" directive must be issued before
4232 the ".endp" directive that closes the procedure descriptor. */
4233 output_function_exception_table (fnname
);
4236 assemble_end_function (current_function_decl
, fnname
);
4238 #ifndef TARGET_UNWIND_INFO
4239 /* Otherwise, it feels unclean to switch sections in the middle. */
4240 output_function_exception_table (fnname
);
4243 user_defined_section_attribute
= false;
4245 /* Free up reg info memory. */
4249 fflush (asm_out_file
);
4251 /* Write DBX symbols if requested. */
4253 /* Note that for those inline functions where we don't initially
4254 know for certain that we will be generating an out-of-line copy,
4255 the first invocation of this routine (rest_of_compilation) will
4256 skip over this code by doing a `goto exit_rest_of_compilation;'.
4257 Later on, wrapup_global_declarations will (indirectly) call
4258 rest_of_compilation again for those inline functions that need
4259 to have out-of-line copies generated. During that call, we
4260 *will* be routed past here. */
4262 timevar_push (TV_SYMOUT
);
4263 (*debug_hooks
->function_decl
) (current_function_decl
);
4264 timevar_pop (TV_SYMOUT
);
4266 /* Release the blocks that are linked to DECL_INITIAL() to free the memory. */
4267 DECL_INITIAL (current_function_decl
) = error_mark_node
;
4269 if (DECL_STATIC_CONSTRUCTOR (current_function_decl
)
4270 && targetm
.have_ctors_dtors
)
4271 targetm
.asm_out
.constructor (XEXP (DECL_RTL (current_function_decl
), 0),
4272 decl_init_priority_lookup
4273 (current_function_decl
));
4274 if (DECL_STATIC_DESTRUCTOR (current_function_decl
)
4275 && targetm
.have_ctors_dtors
)
4276 targetm
.asm_out
.destructor (XEXP (DECL_RTL (current_function_decl
), 0),
4277 decl_fini_priority_lookup
4278 (current_function_decl
));
4282 struct rtl_opt_pass pass_final
=
4288 rest_of_handle_final
, /* execute */
4291 0, /* static_pass_number */
4292 TV_FINAL
, /* tv_id */
4293 0, /* properties_required */
4294 0, /* properties_provided */
4295 0, /* properties_destroyed */
4296 0, /* todo_flags_start */
4297 TODO_ggc_collect
/* todo_flags_finish */
4303 rest_of_handle_shorten_branches (void)
4305 /* Shorten branches. */
4306 shorten_branches (get_insns ());
4310 struct rtl_opt_pass pass_shorten_branches
=
4314 "shorten", /* name */
4316 rest_of_handle_shorten_branches
, /* execute */
4319 0, /* static_pass_number */
4320 TV_FINAL
, /* tv_id */
4321 0, /* properties_required */
4322 0, /* properties_provided */
4323 0, /* properties_destroyed */
4324 0, /* todo_flags_start */
4325 TODO_dump_func
/* todo_flags_finish */
4331 rest_of_clean_state (void)
4334 FILE *final_output
= NULL
;
4335 int save_unnumbered
= flag_dump_unnumbered
;
4336 int save_noaddr
= flag_dump_noaddr
;
4338 if (flag_dump_final_insns
)
4340 final_output
= fopen (flag_dump_final_insns
, "a");
4343 error ("could not open final insn dump file %qs: %s",
4344 flag_dump_final_insns
, strerror (errno
));
4345 flag_dump_final_insns
= NULL
;
4351 aname
= (IDENTIFIER_POINTER
4352 (DECL_ASSEMBLER_NAME (current_function_decl
)));
4353 fprintf (final_output
, "\n;; Function (%s) %s\n\n", aname
,
4354 cfun
->function_frequency
== FUNCTION_FREQUENCY_HOT
4356 : cfun
->function_frequency
== FUNCTION_FREQUENCY_UNLIKELY_EXECUTED
4357 ? " (unlikely executed)"
4360 flag_dump_noaddr
= flag_dump_unnumbered
= 1;
4362 for (insn
= get_insns (); insn
; insn
= NEXT_INSN (insn
))
4364 INSN_UID (insn
) = CODE_LABEL_NUMBER (insn
);
4366 INSN_UID (insn
) = 0;
4370 /* It is very important to decompose the RTL instruction chain here:
4371 debug information keeps pointing into CODE_LABEL insns inside the function
4372 body. If these remain pointing to the other insns, we end up preserving
4373 whole RTL chain and attached detailed debug info in memory. */
4374 for (insn
= get_insns (); insn
; insn
= next
)
4376 next
= NEXT_INSN (insn
);
4377 NEXT_INSN (insn
) = NULL
;
4378 PREV_INSN (insn
) = NULL
;
4381 && (!NOTE_P (insn
) ||
4382 (NOTE_KIND (insn
) != NOTE_INSN_VAR_LOCATION
4383 && NOTE_KIND (insn
) != NOTE_INSN_BLOCK_BEG
4384 && NOTE_KIND (insn
) != NOTE_INSN_BLOCK_END
)))
4385 print_rtl_single (final_output
, insn
);
4391 flag_dump_noaddr
= save_noaddr
;
4392 flag_dump_unnumbered
= save_unnumbered
;
4394 if (fclose (final_output
))
4396 error ("could not close final insn dump file %qs: %s",
4397 flag_dump_final_insns
, strerror (errno
));
4398 flag_dump_final_insns
= NULL
;
4402 /* In case the function was not output,
4403 don't leave any temporary anonymous types
4404 queued up for sdb output. */
4405 #ifdef SDB_DEBUGGING_INFO
4406 if (write_symbols
== SDB_DEBUG
)
4407 sdbout_types (NULL_TREE
);
4410 flag_rerun_cse_after_global_opts
= 0;
4411 reload_completed
= 0;
4412 epilogue_completed
= 0;
4414 regstack_completed
= 0;
4417 /* Clear out the insn_length contents now that they are no
4419 init_insn_lengths ();
4421 /* Show no temporary slots allocated. */
4424 free_bb_for_insn ();
4428 if (targetm
.binds_local_p (current_function_decl
))
4430 unsigned int pref
= crtl
->preferred_stack_boundary
;
4431 if (crtl
->stack_alignment_needed
> crtl
->preferred_stack_boundary
)
4432 pref
= crtl
->stack_alignment_needed
;
4433 cgraph_rtl_info (current_function_decl
)->preferred_incoming_stack_boundary
4437 /* Make sure volatile mem refs aren't considered valid operands for
4438 arithmetic insns. We must call this here if this is a nested inline
4439 function, since the above code leaves us in the init_recog state,
4440 and the function context push/pop code does not save/restore volatile_ok.
4442 ??? Maybe it isn't necessary for expand_start_function to call this
4443 anymore if we do it here? */
4445 init_recog_no_volatile ();
4447 /* We're done with this function. Free up memory if we can. */
4448 free_after_parsing (cfun
);
4449 free_after_compilation (cfun
);
4453 struct rtl_opt_pass pass_clean_state
=
4457 "*clean_state", /* name */
4459 rest_of_clean_state
, /* execute */
4462 0, /* static_pass_number */
4463 TV_FINAL
, /* tv_id */
4464 0, /* properties_required */
4465 0, /* properties_provided */
4466 PROP_rtl
, /* properties_destroyed */
4467 0, /* todo_flags_start */
4468 0 /* todo_flags_finish */